Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 101 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Kernel Crypto API request output the next IV data to
IV buffer for CBC implementation. So the last block data of
ciphertext should be copid into assigned IV buffer.
Reported-by: Eric Biggers <ebiggers@google.com>
Fixes: 433cd2c617 ("crypto: rockchip - add crypto driver for rk3288")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Zhang Zhijie <zhangzj@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode.
It also removes a couple of unnecessary key length checks that
are already performed by the crypto API.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For chain mode in cipher(eg. AES-CBC/DES-CBC), the iv is continuously
updated in the operation. The new iv value should be written to device
register by software.
Reported-by: Eric Biggers <ebiggers@google.com>
Fixes: 433cd2c617 ("crypto: rockchip - add crypto driver for rk3288")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Zhang Zhijie <zhangzj@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In some cases, the nents of src scatterlist is different from
dst scatterlist. So two variables are used to handle the nents
of src&dst scatterlist.
Reported-by: Eric Biggers <ebiggers@google.com>
Fixes: 433cd2c617 ("crypto: rockchip - add crypto driver for rk3288")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Zhang Zhijie <zhangzj@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CRYPTO_TFM_REQ_WEAK_KEY confuses newcomers to the crypto API because it
sounds like it is requesting a weak key. Actually, it is requesting
that weak keys be forbidden (for algorithms that have the notion of
"weak keys"; currently only DES and XTS do).
Also it is only one letter away from CRYPTO_TFM_RES_WEAK_KEY, with which
it can be easily confused. (This in fact happened in the UX500 driver,
though just in some debugging messages.)
Therefore, make the intent clear by renaming it to
CRYPTO_TFM_REQ_FORBID_WEAK_KEYS.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device can only process one request at a time. So if multiple
requests came at the same time, we can enqueue them first, and
dequeue them one by one when the device is idle.
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sometime we would unable to dequeue the crypto request, in this case,
we should finish crypto and return the err code.
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It's illegal to call the completion function from hardirq context,
it will cause runtime tests to fail. Let's build a new task (done_task)
for moving update operation from hardirq context.
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If devm_add_action() fails we are explicitly calling the cleanup to free
the resources allocated. Lets use the helper devm_add_action_or_reset()
and return directly in case of error, as we know that the cleanup function
has been already called by the helper if there was any error.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add md5 sha1 sha256 support for crypto engine in rk3288.
Signed-off-by: Zain Wang <zain.wang@rock-chips.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Lockdep warns about a possible deadlock resulting from the use of regular
spin_locks:
=================================
[ INFO: inconsistent lock state ]
4.4.0-rc2+ #2724 Not tainted
---------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
ksoftirqd/0/3 [HC0[0]:SC1[1]:HE1:SE0] takes:
(&(&crypto_info->lock)->rlock){+.?...}, at: [<bf14a65c>] rk_crypto_tasklet_cb+0x24/0xb4 [rk_crypto]
{SOFTIRQ-ON-W} state was registered at:
[<c007f4ac>] lock_acquire+0x178/0x218
[<c0759bac>] _raw_spin_lock+0x54/0x64
[<bf14af88>] rk_handle_req+0x7c/0xbc [rk_crypto]
[<bf14b040>] rk_des_ecb_encrypt+0x2c/0x30 [rk_crypto]
[<bf14b05c>] rk_aes_ecb_encrypt+0x18/0x1c [rk_crypto]
[<c028c820>] skcipher_encrypt_ablkcipher+0x64/0x68
[<c0290770>] __test_skcipher+0x2a8/0x8dc
[<c0292e94>] test_skcipher+0x38/0xc4
[<c0292fb0>] alg_test_skcipher+0x90/0xb0
[<c0292158>] alg_test+0x1e8/0x280
[<c028f6f4>] cryptomgr_test+0x34/0x54
[<c004bbe8>] kthread+0xf4/0x10c
[<c0010010>] ret_from_fork+0x14/0x24
irq event stamp: 10672
hardirqs last enabled at (10672): [<c002fac8>] tasklet_action+0x48/0x104
hardirqs last disabled at (10671): [<c002faa0>] tasklet_action+0x20/0x104
softirqs last enabled at (10658): [<c002ef84>] __do_softirq+0x358/0x49c
softirqs last disabled at (10669): [<c002f108>] run_ksoftirqd+0x40/0x80
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&crypto_info->lock)->rlock);
<Interrupt>
lock(&(&crypto_info->lock)->rlock);
*** DEADLOCK ***
Fix this by moving to irq-disabling spinlocks.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Crypto driver support:
ecb(aes) cbc(aes) ecb(des) cbc(des) ecb(des3_ede) cbc(des3_ede)
You can alloc tags above in your case.
And other algorithms and platforms will be added later on.
Signed-off-by: Zain Wang <zain.wang@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
