Commit Graph

5967 Commits

Author SHA1 Message Date
Kumar Gala
a6ecb7e96c powerpc/83xx: Update ranges in gianfar node to match other dts
The gianfar@25000 node was missing its ranges prop for the mdio bus
and provided an explicit ranges property on gianfar@24000 to match
change from commit:

commit 70b3adbba0
Author: Anton Vorontsov <avorontsov@ru.mvista.com>
Date:   Thu Mar 19 21:01:45 2009 +0300

    powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-24 09:23:17 -05:00
Anton Vorontsov
d8bc55fb33 powerpc/86xx: Move gianfar mdio nodes under the ethernet nodes
Currently it doesn't matter where the mdio nodes are placed, but with
power management support (i.e. when sleep = <> properties will take
effect), mdio nodes placement will become important: mdio controller
is a part of the ethernet block, so the mdio nodes should be placed
correctly. Otherwise we may wrongly assume that MDIO controllers are
available during sleep.

Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-24 08:35:18 -05:00
Anton Vorontsov
84ba4a5899 powerpc/85xx: Move gianfar mdio nodes under the ethernet nodes
Currently it doesn't matter where the mdio nodes are placed, but with
power management support (i.e. when sleep = <> properties will take
effect), mdio nodes placement will become important: mdio controller
is a part of the ethernet block, so the mdio nodes should be placed
correctly. Otherwise we may wrongly assume that MDIO controllers are
available during sleep.

Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-24 08:35:13 -05:00
Anton Vorontsov
70b3adbba0 powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes
Currently it doesn't matter where the mdio nodes are placed, but with
power management support (i.e. when sleep = <> properties will take
effect), mdio nodes placement will become important: mdio controller
is a part of the ethernet block, so the mdio nodes should be placed
correctly. Otherwise we may wrongly assume that MDIO controllers are
available during sleep.

Suggested-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-24 08:35:04 -05:00
Anton Vorontsov
125a00d74e powerpc/83xx: Add power management support for MPC837x boards
This patch adds pmc nodes to the device tree files so that the boards
will able to use standby capability of MPC837x processors. The MPC837x
PMC controllers are compatible with MPC8349 ones (i.e. no deep sleep).

sleep = <> properties are used to specify SCCR masks as described
in "Specifying Device Power Management Information (sleep property)"
chapter in Documentation/powerpc/booting-without-of.txt.

Since I2C1 and eSDHC controllers share the same clock source, they
are now placed under sleep-nexus nodes.

A processor is able to wakeup the boards on LAN events (Wake-On-Lan),
console events (with no_console_suspend kernel command line), GPIO
events and external IRQs (IRQ1 and IRQ2).

The processor can also wakeup the boards by the fourth general purpose
timer in GTM1 block, but the GTM wakeup support isn't yet implemented
(it's tested to work, but it's unclear how can we use the quite short
GTM timers, and how do we want to expose the GTM to userspace).

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-24 08:34:19 -05:00
Liu Yu
046a48b35b KVM: ppc: e500: Fix the bug that KVM is unstable in SMP
TLB entry should enable memory coherence in SMP.

And like commit 631fba9dd3aca519355322cef035730609e91593,
remove guard attribute to enable the prefetch of guest memory.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:15 +02:00
Liu Yu
bc35cbc85c KVM: ppc: e500: Fix the bug that mas0 update to wrong value when read TLB entry
Should clear and then update the next victim area here.

Guest kernel only read TLB1 when startup kernel,
this bug result in an extra 4K TLB1 mapping in guest from 0x0 to 0x0.

As the problem has no impact to bootup a guest,
we didn't notice it before.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:14 +02:00
Liu Yu
b0a1835d53 KVM: ppc: Add emulation of E500 register mmucsr0
Latest kernel flushes TLB via mmucsr0.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Acked-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:12 +02:00
Liu Yu
9aa4dd5e5f KVM: ppc: Move to new TLB invalidate interface
Commit 2a4aca1144 removed old method _tlbia().

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:05 +02:00
Liu Yu
fb2838d446 KVM: ppc: Fix e500 warnings and some spelling problems
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:05 +02:00
Liu Yu
87c656b414 powerpc/fsl-booke: declare tlbcam_index for use in c
So, KVM needs to read tlbcam_index to know exactly
which TLB1 entry is unused by host.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:05 +02:00
Avi Kivity
5d9b8e30f5 KVM: Add CONFIG_HAVE_KVM_IRQCHIP
Two KVM archs support irqchips and two don't.  Add a Kconfig item to
make selecting between the two models easier.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:02 +02:00
Hollis Blanchard
f5d0906b5b KVM: ppc: remove debug support broken by KVM debug rewrite
After the rewrite of KVM's debug support, this code doesn't even build any
more.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:03:01 +02:00
Hollis Blanchard
bb3a8a178d KVM: ppc: Add extra E500 exceptions
e500 has additional interrupt vectors (and corresponding IVORs) for SPE and
performance monitoring interrupts.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:59 +02:00
Hollis Blanchard
bdc89f13ec KVM: ppc: distinguish between interrupts and priorities
Although BOOKE_MAX_INTERRUPT has the right value, the meaning is not match.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:59 +02:00
Hollis Blanchard
b52a638c39 KVM: ppc: Add kvmppc_mmu_dtlb/itlb_miss for booke
When itlb or dtlb miss happens, E500 needs to update some mmu registers.
So that the auto-load mechanism can work on E500 when write a tlb entry.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:59 +02:00
Hollis Blanchard
bc8080cbcc KVM: ppc: E500 core-specific code
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:58 +02:00
Hollis Blanchard
17c885eb5c KVM: ppc: ifdef iccci with CONFIG_44x
E500 deosn't support this instruction.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:58 +02:00
Hollis Blanchard
366d4b9b9f KVM: ppc: No need to include core-header for KVM in asm-offsets.c currently
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:58 +02:00
Hollis Blanchard
f7b200af8f KVM: ppc: Add dbsr in kvm_vcpu_arch
Kernel for E500 need clear dbsr when startup.
So add dbsr register in kvm_vcpu_arch for BOOKE.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:57 +02:00
Hollis Blanchard
d0c7dc0344 KVM: ppc: split out common Book E instruction emulation
The Book E code will be shared with e500.

I've left PID in kvmppc_core_emulate_op() just so that we don't need to move
kvmppc_set_pid() right now. Once we have the e500 implementation, we can
probably share that too.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:57 +02:00
Hollis Blanchard
cea5d8c9de KVM: ppc: use macros instead of hardcoded literals for instruction decoding
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:57 +02:00
Hollis Blanchard
f44353610b KVM: ppc: remove last 44x-specific bits from booke.c
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:57 +02:00
Hollis Blanchard
fa86b8dda2 KVM: ppc: rename 44x MMU functions used in booke.c
e500 will provide its own implementation of these.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:56 +02:00
Hollis Blanchard
be8d1cae07 KVM: ppc: turn tlb_xlate() into a per-core hook (and give it a better name)
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:56 +02:00
Hollis Blanchard
58a96214a3 KVM: ppc: change kvmppc_mmu_map() parameters
Passing just the TLB index will ease an e500 implementation.

Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:56 +02:00
Hollis Blanchard
475e7cdd69 KVM: ppc: small cosmetic changes to Book E DTLB miss handler
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:56 +02:00
Hollis Blanchard
ecc0981ff0 KVM: ppc: cosmetic changes to mmu hook names
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:55 +02:00
Hollis Blanchard
c46fb0211f KVM: ppc: move struct kvmppc_44x_tlbe into 44x-specific header
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:55 +02:00
Jan Kiszka
989c0f0ed5 KVM: Remove old kvm_guest_debug structs
Remove the remaining arch fragments of the old guest debug interface
that now break non-x86 builds.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:50 +02:00
Jan Kiszka
d0bfb940ec KVM: New guest debug interface
This rips out the support for KVM_DEBUG_GUEST and introduces a new IOCTL
instead: KVM_SET_GUEST_DEBUG. The IOCTL payload consists of a generic
part, controlling the "main switch" and the single-step feature. The
arch specific part adds an x86 interface for intercepting both types of
debug exceptions separately and re-injecting them when the host was not
interested. Moveover, the foundation for guest debugging via debug
registers is layed.

To signal breakpoint events properly back to userland, an arch-specific
data block is now returned along KVM_EXIT_DEBUG. For x86, the arch block
contains the PC, the debug exception, and relevant debug registers to
tell debug events properly apart.

The availability of this new interface is signaled by
KVM_CAP_SET_GUEST_DEBUG. Empty stubs for not yet supported archs are
provided.

Note that both SVM and VTX are supported, but only the latter was tested
yet. Based on the experience with all those VTX corner case, I would be
fairly surprised if SVM will work out of the box.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-03-24 11:02:49 +02:00
Benjamin Herrenschmidt
757c74d298 powerpc/mm: Introduce early_init_mmu() on 64-bit
This moves some MMU related init code out of setup_64.c into hash_utils_64.c
and calls it early_init_mmu() and early_init_mmu_secondary(). This will
make it easier to plug in a new MMU type.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:34 +11:00
Benjamin Herrenschmidt
a033a487f8 powerpc/mm: Add option for non-atomic PTE updates to ppc64
ppc32 has it already, add it to ppc64 as a preliminary for adding
support for Book3E 64-bit support

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:34 +11:00
Benjamin Herrenschmidt
ff7c660092 powerpc/mm: Fix printk type warning in mmu_context_nohash
We need to use %zu instead of %d when printing a sizeof()

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:34 +11:00
Benjamin Herrenschmidt
d62cbf45a8 powerpc/mm: Rename arch/powerpc/kernel/mmap.c to mmap_64.c
This file is only useful on 64-bit, so we name it accordingly.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:33 +11:00
Benjamin Herrenschmidt
71087002cf powerpc/mm: Merge various PTE bits and accessors definitions
Now that they are almost identical, we can merge some of the definitions
related to the PTE format into common files.

This creates a new pte-common.h which is included by both 32 and 64-bit
right after the CPU specific pte-*.h file, and which defines some
bits to "default" values if they haven't been defined already, and
then provides a generic definition of most of the bit combinations
based on these and exposed to the rest of the kernel.

I also moved to the common pgtable.h most of the "small" accessors to the
PTE bits and modification helpers (pte_mk*). The actual accessors remain
in their separate files.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:33 +11:00
Benjamin Herrenschmidt
8d1cf34e7a powerpc/mm: Tweak PTE bit combination definitions
This patch tweaks the way some PTE bit combinations are defined, in such a
way that the 32 and 64-bit variant become almost identical and that will
make it easier to bring in a new common pte-* file for the new variant
of the Book3-E support.

The combination of bits defining access to kernel pages are now clearly
separated from the combination used by userspace and the core VM. The
resulting generated code should remain identical unless I made a mistake.

Note: While at it, I removed a non-sensical statement related to CONFIG_KGDB
in ppc_mmu_32.c which could cause kernel mappings to be user accessible when
that option is enabled. Probably something that bitrot.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:33 +11:00
Jeremy Kerr
2a7d55fda5 powerpc/cell: Fix iommu exception reporting
Currently, we will report a page fault as a segment fault, and report
a segment fault as both a page and segment fault.

Fix the SPF_P definition to be correct according to the iommu docs, and
mask before comparing.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:32 +11:00
Kumar Gala
2319f12395 powerpc/mm: e300c2/c3/c4 TLB errata workaround
Complete workaround for DTLB errata in e300c2/c3/c4 processors.

Due to the bug, the hardware-implemented LRU algorythm always goes to way
1 of the TLB. This fix implements the proposed software workaround in
form of a LRW table for chosing the TLB-way.

Based on patch from David Jander <david@protonic.nl>

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:32 +11:00
Kumar Gala
eb3436a013 powerpc/mm: Used free register to save a few cycles in SW TLB miss handling
Now that r0 is free we can keep the value of I/DMISS in r3 and not reload
it before doing the tlbli/d.  This saves us a few cycles in the fast path
case.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:31 +11:00
Kumar Gala
00fcb14703 powerpc/mm: Remove unused register usage in SW TLB miss handling
Long ago we had some code that actually used the CTR in the SW TLB
miss handlers (603/e300).  Since we don't use it no reason to waste
cycles saving it off and restoring it (we actually didn't restore it
in the fast path case).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:31 +11:00
Kumar Gala
4ae0ff606e powerpc: expect all devices calling dma ops to have archdata set
Now that we set archdata for of_platform and platform devices via
platform_notify() we no longer need to special case having a NULL device
pointer or NULL archdata.  It should be a driver error if this condition
shows up and the driver should be fixed.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:31 +11:00
Kumar Gala
d746286c1f powerpc: setup default archdata for {of_}platform via bus_register_notifier
Since a number of powerpc chips are SoCs we end up having dma-able
devices that are registered as platform or of_platform devices.  We need
to hook the archdata to setup proper dma_ops for these devices.

Rather than having to add a bus_notify to each platform we add a default
one at the highest priority (called first) to set the default dma_ops for
of_platform and platform devices to dma_direct_ops.  This allows platform
code to override the ops by providing their own notifier call back.

In the future to enable >4G DMA support on ppc32 we can hook swiotlb ops.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:30 +11:00
Kumar Gala
32ac57668d powerpc/pci: Default to dma_direct_ops for pci dma_ops
This will allow us to remove the ppc32 specific checks in get_dma_ops()
that defaults to dma_direct_ops if the archdata is NULL.  We really
should always have archdata set to something going forward.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:30 +11:00
Stephen Rothwell
fb2474491c powerpc/pmi: Irq handlers return irqreturn_t
Commit bedd30d986 ("genirq: make irqreturn_t
an enum") from the genirq tree in next-20090319 caused this new warning:

arch/powerpc/sysdev/pmi.c: In function 'pmi_of_probe':
arch/powerpc/sysdev/pmi.c:166: warning: passing argument 2 of 'request_irq' from incompatible pointer type

Change the return type of the handler from "int" to "irqreturn_t".

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:30 +11:00
Rusty Russell
56aa4129e8 cpumask: Use mm_cpumask() wrapper instead of cpu_vm_mask
Makes code futureproof against the impending change to mm->cpu_vm_mask.

It's also a chance to use the new cpumask_ ops which take a pointer
(the older ones are deprecated, but there's no hurry for arch code).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:29 +11:00
Michael Ellerman
f5ac590e79 powerpc: Turn on self-tests in ppc64_defconfig
Most of the code enabled by these options is __init, and it's much
more useful to actually run the tests.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:29 +11:00
Michael Ellerman
097529f34e powerpc/msi: Mark the MSI bitmap selftest code as __init
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:28 +11:00
Michael Ellerman
ebf0f334dd powerpc/cell: Make axonram depends on BLOCK
Fix axonram driver dependency

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:28 +11:00
Jeremy Kerr
fc59a3fc8e powerpc: Add virtual processor dispatch trace log
pseries SPLPAR machines are able to retrieve a log of dispatch and
preempt events from the hypervisor. With this information, we can
see when and why each dispatch & preempt is occuring.

This change adds a set of debugfs files allowing userspace to read this
dispatch log.

Based on initial patches from Nishanth Aravamudan <nacc@us.ibm.com>.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:28 +11:00
Jeremy Kerr
098e8957af powerpc: Add dispatch trace log fields to lppaca
PAPR v2.3 defines fields in the virtual processor area for a dispatch
trace log (DLT). Since we'd like to use the DLT, add the necessary
fields to struct lppaca.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:27 +11:00
Jeremy Kerr
4032278324 powerpc: Fix page_ins details in lppaca comments
The page_ins member ends at byte 0x3, not 0x4. Also, fix up the
alignment.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:27 +11:00
Rusty Russell
9a3719341a powerpc: Make sysfs code use smp_call_function_single
Impact: performance improvement

This fixes 'powerpc: avoid cpumask games in arch/powerpc/kernel/sysfs.c'
which talked about using smp_call_function_single, but actually used
work_on_cpu (an older version of the patch).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:47:27 +11:00
Nathan Fontenot
c5785f9e1c powerpc/pseries: Failed reconfig notifier chain call cleanup
The return code from invoking the notifier chain when updating the
ibm,dynamic-memory property is not handled properly. In failure
cases (rc == NOTIFY_BAD) we should be restoring the original value
of the property.  In success (rc == NOTIFY_OK) we should be returning
zero from the calling routine.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:43:52 +11:00
Benjamin Herrenschmidt
151a9f4aef powerpc: Fix prom_init on 32-bit OF machines
Commit e7943fbbfd broke ppc32 using
Open Firmware client interface due to using the wrong relocation
macro when accessing the variable "linux_banner".

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-24 13:43:35 +11:00
Benjamin Herrenschmidt
9e41d9597e Merge commit 'origin/master' into next 2009-03-24 13:38:30 +11:00
Kumar Gala
345953cf9a powerpc/mm: Fix Respect _PAGE_COHERENT on classic ppc32 SW TLB load machines
Grant picked up the wrong version of "Respect _PAGE_COHERENT on classic
ppc32 SW" (commit a4bd6a93c3)

It was missing the code to actually deal with the fixup of
_PAGE_COHERENT based on the CPU feature.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-23 08:38:26 -05:00
Ingo Molnar
b3e3b302cf Merge branches 'irq/sparseirq' and 'linus' into irq/core 2009-03-23 10:07:49 +01:00
Matthew Wilcox
1c8d7b0a56 PCI MSI: Add support for multiple MSI
Add the new API pci_enable_msi_block() to allow drivers to
request multiple MSI and reimplement pci_enable_msi in terms of
pci_enable_msi_block.  Ensure that the architecture back ends don't
have to know about multiple MSI.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:14 -07:00
Benjamin Herrenschmidt
77ecfe8d42 Merge commit 'gcl/next' into next 2009-03-20 16:27:57 +11:00
Benjamin Herrenschmidt
8d73f102d9 Merge commit 'kumar/next' into next 2009-03-20 15:58:27 +11:00
Benjamin Herrenschmidt
a7d2dac802 powerpc/mm: Unify PTE_RPN_SHIFT and _PAGE_CHG_MASK definitions
This updates the 32-bit headers to use the same definitions for the RPN
shift inside the PTE as 64-bit, and thus updates _PAGE_CHG_MASK to
become identical.

This does introduce a runtime visible difference, which is that now,
_PAGE_HASHPTE will be part of _PAGE_CHG_MASK and thus preserved. However
this should have no practical effect as it should have been preserved in
the first place and we got away with not having it there due to our
PTE access functions preserving it anyway.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-20 15:56:58 +11:00
Benjamin Herrenschmidt
c605782b1c powerpc/mm: Split the various pgtable-* headers based on MMU type
This patch moves the definition of the PTE format for each MMU type
to separate files instead of all in one file. This improves overall
maintainability and will make it easier to add new types.

On 64-bit, additionally, I've separated the headers relative to the
format of the page table tree (3 vs. 4 levels for 64K vs 4K pages)
from the headers specific to the PTE format for hash based processors,
this will make it easier to add support for Book3 "E" 64-bit
implementations.

There are still some type-related ifdef's in the generic headers,
we might remove them in the long run, but this patch shouldn't result
in any code change, -hopefully- just definitions being moved around.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-20 15:56:57 +11:00
Michael Ellerman
11df1f0551 PCI/MSI: Use #ifdefs instead of weak functions
Weak functions aren't all they're cracked up to be. They lead to
incorrect binaries with some toolchains, they require us to have empty
functions we otherwise wouldn't, and the unused code is not elided
(as of gcc 4.3.2 anyway).

So replace the weak MSI arch hooks with the #define foo foo idiom. We no
longer need empty versions of arch_setup/teardown_msi_irq().

This is less source (by 1 line!), and results in smaller binaries too:

   text	   data	    bss	    dec	    hex	filename
9354300	1693916	 678424	11726640 b2ef30	build/powerpc/vmlinux-before
9354052	1693852	 678424	11726328 b2edf8	build/powerpc/vmlinux-after

Also smaller on x86_64 and arm (iop13xx).

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19 19:29:26 -07:00
Stephen Rothwell
17ad6ea621 numa, cpumask: move numa_node_id default implementation to topology.h, fix
Impact: build fix for powerpc and sparc

Today's linux-next build (powerpc allyesconfig) failed like this:

> In file included from include/linux/mmzone.h:776,
>                  from include/linux/gfp.h:5,
>                  from include/linux/kmod.h:23,
>                  from include/linux/module.h:14,
>                  from init/version.c:11:
> arch/powerpc/include/asm/mmzone.h:32: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'numa_cpumask_lookup_table'

Caused by commit 082edb7bf4 ("numa,
cpumask: move numa_node_id default implementation to topology.h") from
the cpus4096 tree which removed the include of linux/topology.h from
linux/mmzone.h.

Same for sparc64 defconfig.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-b: Rusty Russell <rusty@rustcorp.com.au>
Cc: ppc-dev <linuxppc-dev@ozlabs.org>
LKML-Reference: <20090319220322.3baa4613.sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-19 12:51:25 +01:00
Martyn Welch
e41c615a70 powerpc/86xx: Default configuration for GE Fanuc's PPC9A
Support for the PPC9A VME Single Board Computer from GE Fanuc (PowerPC
MPC8641D).

This is the default config file for GE Fanuc's PPC9A, a 6U single board
computer, based on Freescale's MPC8641D.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 04:01:18 -05:00
Martyn Welch
740d36ae63 powerpc/86xx: Board support for GE Fanuc's PPC9A
Support for the PPC9A VME Single Board Computer from GE Fanuc (PowerPC
MPC8641D).

This is the basic board support for GE Fanuc's PPC9A, a 6U single board
computer, based on Freescale's MPC8641D.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 04:01:00 -05:00
Grant Likely
6e27cca915 powerpc/cpm2: fix building fs_enet driver as a module.
Building the fs_enet driver as a modules fails because it cannot
access the global cpm2_immr symbol.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 04:00:01 -05:00
Martyn Welch
01ce8ef5e8 powerpc/86xx: Run sbc310 USB fixup code only on the appropriate platform.
Patch to limit NEC fixup to SBC310, following similar patch to SBC610 by
Tony Breeds: 368a12117d

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-19 03:53:39 -05:00
Geoff Levand
9aac397525 powerpc/ps3: ps3_defconfig updates
Update ps3_defconfig.

Sets these options:

  CONFIG_PS3_VRAM=m
  CONFIG_BLK_DEV_DM=m
  CONFIG_USB_HIDDEV=y
  CONFIG_EXT4_FS=y

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-18 13:44:16 +11:00
Benjamin Herrenschmidt
c71327ad9f Merge commit 'gcl/merge' into merge 2009-03-18 13:16:30 +11:00
Kumar Gala
a4bd6a93c3 powerpc/mm: Respect _PAGE_COHERENT on classic ppc32 SW
Since we now set _PAGE_COHERENT in the Linux PTE we shouldn't be clearing
it out before we setup the SW TLB.  Today all the SW TLB machines
(603/e300) that we support are non-SMP, however there are some errata on
some devices that cause us to set _PAGE_COHERENT via CPU_FTR_NEED_COHERENT.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-03-17 09:17:50 -06:00
Piotr Ziecik
c9310920e6 powerpc/5200: Enable CPU_FTR_NEED_COHERENT for MPC52xx
BestComm, a DMA engine in MPC52xx SoC, requires snooping when
CPU caches are enabled to work properly.

Adding CPU_FTR_NEED_COHERENT fixes NFS problems on MPC52xx machines
introduced by 'powerpc/mm: Fix handling of _PAGE_COHERENT in BAT setup
code' (sha1: 4c456a67f5).

Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-03-17 09:17:50 -06:00
Stephen Rothwell
a6bc3262c5 sparseirq, powerpc/cell: fix unused variable warning in interrupt.c
This new compiler warning:

   arch/powerpc/platforms/cell/interrupt.c: In function 'handle_iic_irq':
   arch/powerpc/platforms/cell/interrupt.c:240: warning: unused variable 'cpu'

Triggers because the local variable 'cpu' became unused due to commit:

   dee4102: sparseirq: use kstat_irqs_cpu instead

Remove the variable.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: ppc-dev <linuxppc-dev@ozlabs.org>
LKML-Reference: <20090316185256.4a160374.sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-16 09:21:57 +01:00
Ingo Molnar
edb35028e4 Merge branches 'irq/genirq' and 'linus' into irq/core 2009-03-16 09:20:13 +01:00
Geert Uytterhoeven
f507cd2203 ps3/block: Replace mtd/ps3vram by block/ps3vram
Convert the PS3 Video RAM Storage Driver from an MTD driver to a plain block
device driver.

The ps3vram driver exposes unused video RAM on the PS3 as a block device
suitable for storage or swap.  Fast data transfer is achieved using a local
cache in system RAM and DMA transfers via the GPU.

The new driver is ca. 50% faster for reading, and ca. 10% for writing.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-13 16:07:19 +11:00
Ingo Molnar
17d85bc756 Merge commit 'v2.6.29-rc8' into cpus4096 2009-03-13 05:54:43 +01:00
Grant Likely
a7e1cf0c51 powerpc/bootwrapper: add fixed-head.o to simpleimage wrappers
fixed-head.o must be linked into the bootwrapper for raw-binary images to
work.  This patch adds it into the bootwrapper.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Reported-by: Eddie Dawydiuk <eddie@embeddedarm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 09:36:26 -06:00
Wolfram Sang
10b9dc6f6b powerpc/5200: add Phytec phyCORE-MPC5200B-IO board (pcm032)
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-03-11 09:36:26 -06:00
Wolfgang Grandegger
df8a95f46f powerpc/5200: add function to return external clock frequency
This patch adds the utility function mpc52xx_get_xtal_freq() to get
the frequency of the external oscillator clock connected to the pin
SYS_XTAL_IN. The MSCAN may us it as clock source. Unfortunately, this
value is not available from the FDT blob, but it can be determined
from the IPB frequency.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-03-11 09:36:26 -06:00
Grant Likely
bb899d49a5 powerpc/5200: remove sysfs debug file from GPT driver
Remove poorly designed debug sysfs attribute entry from the GPT driver.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2009-03-11 09:36:26 -06:00
Kumar Gala
563fdd4a0a powerpc/85xx: Update smp support to handle doorbells and non-mpic init
Use device tree to determine if we actually have an MPIC and use
CPU feature to decide if we should use doorbells for IPIs.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-11 06:44:56 -05:00
Liu Yu
1a3d1fc227 powerpc/math-emu: Fix efp dependence
There is no dependece between efp and math-emu.  But when disable math-emu
the efp code cannot be built.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-11 06:00:08 -05:00
Thomas Gleixner
2b881b940a powerpc/85xx: remove setup_irq(NULL action) in ksi8560
setup_irq(0, NULL) is broken as setup_irq() dereferences action
unconditionally.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-11 06:00:06 -05:00
Ted Peters
f084e8db18 powerpc/85xx: Fix MPC8572DS PCI protected interrupt sources
The PCI irqs for the protected sources where not correct for PCI PHBs

Signed-off-by: Ted Peters <ted.peters@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-11 06:00:04 -05:00
Benjamin Herrenschmidt
28794d34ec powerpc/kconfig: Kill PPC_MULTIPLATFORM
CONFIG_PPC_MULTIPLATFORM is a remain of the pre-powerpc days and isn't
really meaningful anymore. It was basically equivalent to PPC64 || 6xx.

This removes it along with the following changes:

 - 32-bit platforms that relied on PPC32 && PPC_MULTIPLATFORM now rely
   on 6xx which is what they want anyway.

 - A new symbol, PPC_BOOK3S, is defined that represent compliance with
   the "Server" variant of the architecture. This is set when either 6xx
   or PPC64 is set and open the door for future BOOK3E 64-bit.

 - 64-bit platforms that relied on PPC64 && PPC_MULTIPLATFORM now use
   PPC64 && PPC_BOOK3S

 - A separate and selectable CONFIG_PPC_OF_BOOT_TRAMPOLINE option is now
   used to control the use of prom_init.c

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:11:35 +11:00
Benjamin Herrenschmidt
9e5efaa936 powerpc/mm: Properly wire up get_user_pages_fast() on 32-bit
While we did add support for _PAGE_SPECIAL on some 32-bit platforms,
we never actually built get_user_pages_fast() on them. This fixes
it which requires a little bit of ifdef'ing around.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:11:34 +11:00
Thomas Gleixner
353bca5ed4 powerpc/irq: Convert obsolete hw_interrupt_type to struct irq_chip
Impact: cleanup

Convert the last remaining users to struct irq_chip.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: linuxppc-dev@ozlabs.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:11:34 +11:00
Thomas Gleixner
97f7d6bcc1 powerpc/irq: Convert obsolete irq_desc_t to struct irq_desc
Impact: cleanup

Convert the last remaining users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: linuxppc-dev@ozlabs.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:11:34 +11:00
Andrew Klossner
af9c724907 powerpc/udbg: Fix lost byte during console handover; change LFCR to CRLF
When the console is on a serial port to be driven by serial8250, a
character can be lost from the end of the first line in the two-line
sequence

	serial8250.0: ttyS0 at MMIO 0xe0004500 (irq = 42) is a 16550A
	console handover: boot [udbg0] -> real [ttyS0]

This happens because udbg_puts or udbg_write stuff the last byte of
the line into the Tx FIFO and return, whereupon the serial8250
initialization code immediately empties that FIFO.  The fix: udbg_puts
and udbg_write now wait for the Tx FIFO to clear before returning.
This delays the system by one additional serial frame time for each
line written by udbg, but the effect is not noticeable, a cumulative
17 milliseconds for 200 lines of early printk output at 115200 baud.

Also, the routines in udbg_16550.c now emit CRLF instead of LFCR.
Linux makes a point of emitting CRLF because, when serial output is
captured to a file, LFCR sequences can confuse text editors.  See
http://lkml.org/lkml/2006/2/4/50 for some history.

Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:11:34 +11:00
Wolfram Sang
a77acda0b7 powerpc/pci: Fix typo: s/resouces/resources/ in a pr_debug
Fix typo: s/resouces/resources/ in a pr_debug

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:11:34 +11:00
Michael Ellerman
47c3c6ef95 powerpc/cell: Fix Axon MSI driver dependencies
The Axon MSI driver depends on more than just PCI_MSI, so add a
Kconfig fragment for it. Fixes randconfig build failures.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:11:33 +11:00
Michael Ellerman
1bac022155 powerpc/pseries: The pseries MSI code depends on EEH
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:11:33 +11:00
Michael Ellerman
94afa5a5f5 powerpc/pseries: Reject discontiguous/non-zero based MSI-X requests
There's no way for us to express to firmware that we want a
discontiguous, or non-zero based, range of MSI-X entries. So we
must reject such requests.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:11:33 +11:00
Michael Ellerman
e7943fbbfd powerpc: Print linux_banner in prom_init
So at least you can see what kernel you're booting if you die
before the kernel prints it mid-way through start_kernel().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:11:33 +11:00
Octavian Purdila
7c9583a4db powerpc/oprofile: Enable support for ppc750 processors
This patch enables oprofile for all 3 FX variants and GX variant of the
750 processor.

Signed-off-by: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:11:32 +11:00
Jeremy Kerr
2fb4423aa3 powerpc/spufs: Fix incorrect buffer offset in regs write
We need to offset by *pos bytes, not *pos words.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:11:32 +11:00
Jeremy Kerr
d219889b76 powerpc/spufs: Check file offset before calculating write size in fixed-sized files
Based on an original patch from Roel Kluin <roel.kluin@gmail.com>.

The write size calculated during regs and fpcr writes may currently
go negative. Because size is unsigned, this will wrap, and our
check for EFBIG will fail.

Instead, do the check for EFBIG before subtracting from size.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:11:32 +11:00
roel kluin
e7eec2fc27 powerpc/ps3: Make ps3av_set_video_mode mode ID signed
Change the ps3av_auto_videomode() mode id argument type from unsigned to
signed so a negative id can be detected and reported as an -EINVAL failure.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:10:17 +11:00
Geoff Levand
9146cfc82c powerpc/ps3: Print memory hotplug errors
To help users diagnose hotpug memory problems, change the
printing of memory hotplug errors from DBG() to pr_err().

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:10:17 +11:00
Geoff Levand
c9c38320e8 powerpc: Add missing DABR flags
The powerpc 64 bit architecture defines three flags for the
DABR (Data Address Breakpoint Register).  Add definitions
for the currently missing DABR_DATA_WRITE and DABR_DATA_READ
flags to the powerpc reg.h file.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:10:16 +11:00
Timur Tabi
9dca4efe88 powerpc: Add defintion for MSR[GS] to list of MSR bits
Add macros for the GS (guest state) bit to the list of MSR bit definitions.
On PowerPC cores that support embedded hypervisor mode, GS is cleared if
the system is running in hypervisor state (and MSR[PR] is cleared), and set
if it's running in guest state.  See the Power ISA 2.06 specification for
more information.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:10:16 +11:00
Octavian Purdila
f8ff96db9b powerpc/oprofile: G4 oprofile has variable number of counters
For ppc750 processors which use 4 performance counters instead of the
6 G4 uses but otherwise is compatible with G4.

Signed-off-by: Octavian Purdila <opurdila@ixiacom.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:10:16 +11:00
Arnd Bergmann
8f748aae4b powerpc/spufs: Initialize ctx->stats.tstamp correctly
spuctx_switch_state() warns if ktime goes backwards, but it
sometimes compares an uninitialized value, which showed that
the data was unreliable when we actually saw the warning.

Initialize it to the current time in order to get correct data.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:10:15 +11:00
Michael Ellerman
9e1e3723be powerpc: Remove unused asm-offsets entries for cpu_spec
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:10:15 +11:00
Michael Ellerman
2657dd4e30 powerpc: Make sure we copy all cpu_spec features except PMC related ones
When identify_cpu() is called a second time with a logical PVR, it
only copies a subset of the cpu_spec fields so as to avoid overwriting
the performance monitor fields that were initialized based on the
real PVR.

However some of the other, non performance monitor related fields are
also not copied:
 * pvr_mask
 * pvr_value
 * mmu_features
 * machine_check

The fact that pvr_mask is not copied can result in show_cpuinfo()
showing the cpu as "unknown", if we override an unknown PVR with a
logical one - as reported by Shaggy.

So change the logic to copy all fields, and then put back the PMC
related ones in the case that we're overwriting a real PVR with a
logical one.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:10:14 +11:00
Michael Ellerman
666435bbf3 powerpc: Deindentify identify_cpu()
The for-loop body of identify_cpu() has gotten a little big, so move the
loop body logic into a separate function. No other changes.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:10:14 +11:00
Benjamin Herrenschmidt
1cdab55d8a powerpc: Wire up /proc/vmallocinfo to our ioremap()
This adds the necessary bits and pieces to powerpc implementation of
ioremap to benefit from caller tracking in /proc/vmallocinfo, at least
for ioremap's done after mem init as the older ones aren't tracked.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:10:14 +11:00
Nick Piggin
16962e7ce1 powerpc: Estimate G5 cpufreq transition latency
Setting G5's cpu frequency transition latency to CPUFREQ_ETERNAL stops
ondemand governor from working. I measured the latency using sched_clock
and haven't seen much higher than 11000ns, so I set this to 12000ns for
my configuration. Possibly other configurations will be different?
Ideally the generic code would be able to measure it in case the platform
does not provide it.

But this simple patch at least makes it throttle again.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-11 17:10:13 +11:00
Benjamin Herrenschmidt
e14eee56c2 Merge commit 'origin/master' into next 2009-03-11 17:10:07 +11:00
Benjamin Herrenschmidt
d6ee6f7e4c Merge commit 'gcl/next' into next 2009-03-11 17:10:00 +11:00
Benjamin Herrenschmidt
d301a9f3ff Merge commit 'gcl/merge' into merge 2009-03-11 10:40:29 +11:00
Tejun Heo
19390c4d03 linker script: define __per_cpu_load on all SMP capable archs
Impact: __per_cpu_load available on all SMP capable archs

Percpu now requires three symbols to be defined - __per_cpu_load,
__per_cpu_start and __per_cpu_end.  There were three archs which
didn't have it.  Update them as follows.

* powerpc: can use generic PERCPU() macro.  Compile tested for
  powerpc32, compile/boot tested for powerpc64.

* ia64: can use generic PERCPU_VADDR() macro.  __phys_per_cpu_start is
  identical to __per_cpu_load.  Compile tested and symbol table looks
  identical after the change except for the additional __per_cpu_load.

* arm: added explicit __per_cpu_load definition.  Currently uses
  unified .init output section so can't use the generic macro.  Dunno
  whether the unified .init ouput section is required by arch
  peculiarity so I left it alone.  Please break it up and use PERCPU()
  if possible.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Pat Gefre <pfg@sgi.com>
Cc: Russell King <rmk@arm.linux.org.uk>
2009-03-10 16:27:48 +09:00
Martyn Welch
ac4dff224d powerpc/86xx: Correct local bus registers in GE Fanuc SBC610 dts file
The registers for the local bus are incorrectly set to 0xf8005000 rather
than there actual location of 0xfef05000.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-09 11:48:14 -05:00
Guennadi Liakhovetski
ed75d8635a powerpc: fix linkstation and storcenter compilation breakage
Defining flash partition table in platform code is deprecated, and due to
recent changes linkstation and storcenter do not compile any more with
their default configurations because of undefined references to
physmap_set_partitions(). Instead of fixing them by using the correct
kernel configuration macro in preprocessor conditional, remove partition
table definitions altogether. Instead add support for partition definition
on the command-line and in device tree to the default configurations.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-09 11:10:58 -05:00
Timur Tabi
0bcd783c1f powerpc: add fsl,fifo-depth property to Freescale SSI device nodes
The Freescale Serial Synchronous Interface (SSI) is an audio device present on
some Freescale SOCs.  Various implementations of the SSI have a different
transmit and receive FIFO depth, but are otherwise identical.  To support
these variations, add a new property fsl,fifo-depth to the SSI node that
specifies the depth of the FIFOs.

Also update the MPC8610 HPCD device tree with this property.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-09 10:52:03 -05:00
Kumar Gala
c3071951d0 powerpc/fsl-booke: Add support for tlbilx instructions
The e500mc core supports the new tlbilx instructions that do core
local invalidates and also provide us the ability to take down
all TLB entries matching a given PID.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-09 09:25:38 -05:00
Anton Vorontsov
c026c98739 powerpc/83xx: Do not configure or probe disabled FSL DR USB controllers
On MPC837X CPUs Dual-Role USB isn't always available (for example DR
USB pins can be muxed away to eSDHC).

U-Boot adds status = "disabled" property into the DR USB nodes to
indicate that we must not try to configure or probe Dual-Role USB,
otherwise we'll break eSDHC support on targets with MPC837X CPUs.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-09 09:25:37 -05:00
dayu@datangmobile.cn
30c404699d powerpc/83xx: Fix the interrupt loss problem on ipic
The interrupt pending register is write 1 clear.  If there are more than
one external interrupts pending at the same time, acking the first
interrupt by reading pending register then OR the corresponding bit and
write back to pending register will also clear other interrupt pending
bits.  That will cause loss of interrupt.

Signed-off-by: Da Yu <dayu@datangmobile.cn>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-09 09:25:35 -05:00
Grant Likely
48b3fd14bd powerpc/4xx: update ml507 .dts file to release reference design
This patch updates the Xilinx ML507 device tree to match the released
ML507 powerpc reference design (ml507_ppc440_emb_ref).  This patch is
needed to boot Linux on the ML507 powerpc reference design without
manually generating and tweaking a device tree from the project directory.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-03-06 08:50:24 -07:00
Paul Mackerras
880860e392 perfcounters/powerpc: add support for POWER4 processors
Impact: more hardware support

This adds the back-end for the PMU on the POWER4 and POWER4+ processors
(GP and GQ).  This is quite similar to the PPC970, with 8 PMCs, but has
fewer events than the PPC970.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-03-06 16:30:57 +11:00
Paul Mackerras
aabbaa6036 perfcounters/powerpc: add support for POWER5+ processors
Impact: more hardware support

This adds the back-end for the PMU on the POWER5+ processors (i.e. GS,
including GS DD3 aka POWER5++).  This doesn't use the fixed-function
PMC5 and PMC6 since they don't respect the freeze conditions and don't
generate interrupts, as on POWER6.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-03-06 16:28:37 +11:00
Paul Mackerras
86028598de perfcounters/powerpc: fix oops with multiple counters in a group
Impact: fix oops-causing bug

This fixes a bug in the powerpc hw_perf_counter_init where the code
didn't initialize ctrs[n] before passing the ctrs array to check_excludes,
leading to possible oopses and other incorrect behaviour.  This fixes it
by initializing ctrs[n] correctly.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-03-06 08:07:13 +11:00
Ingo Molnar
a1413c89ae Merge branch 'x86/urgent' into x86/core
Conflicts:
	arch/x86/include/asm/fixmap_64.h
Semantic merge:
	arch/x86/include/asm/fixmap.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-05 21:48:50 +01:00
David S. Miller
508827ff0a Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/tokenring/tmspci.c
	drivers/net/ucc_geth_mii.c
2009-03-05 02:06:47 -08:00
Ingo Molnar
8163d88c79 Merge commit 'v2.6.29-rc7' into perfcounters/core
Conflicts:
	arch/x86/mm/iomap_32.c
2009-03-04 11:42:31 +01:00
Tony Breeds
368a12117d powerpc: Run sbc610 USB fixup code only on the appropriate platform.
commit a969e76a71 (powerpc: Correct USB
support for GE Fanuc SBC610) introduced a fixup for NEC usb controllers.
This fixup should only run on GEF SBC610 boards.

Fixes Fedora bug #486511.
(https://bugzilla.redhat.com/show_bug.cgi?id=486511)

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-04 17:36:52 +11:00
Ingo Molnar
8b0e5860cb Merge branches 'x86/apic', 'x86/cpu', 'x86/fixmap', 'x86/mm', 'x86/sched', 'x86/setup-lzma', 'x86/signal' and 'x86/urgent' into x86/core 2009-03-04 02:22:31 +01:00
Benjamin Herrenschmidt
652e8f8d57 Merge commit 'jwb/next' into next 2009-03-03 13:30:03 +11:00
Roland McGrath
5b1017404a x86-64: seccomp: fix 32/64 syscall hole
On x86-64, a 32-bit process (TIF_IA32) can switch to 64-bit mode with
ljmp, and then use the "syscall" instruction to make a 64-bit system
call.  A 64-bit process make a 32-bit system call with int $0x80.

In both these cases under CONFIG_SECCOMP=y, secure_computing() will use
the wrong system call number table.  The fix is simple: test TS_COMPAT
instead of TIF_IA32.  Here is an example exploit:

	/* test case for seccomp circumvention on x86-64

	   There are two failure modes: compile with -m64 or compile with -m32.

	   The -m64 case is the worst one, because it does "chmod 777 ." (could
	   be any chmod call).  The -m32 case demonstrates it was able to do
	   stat(), which can glean information but not harm anything directly.

	   A buggy kernel will let the test do something, print, and exit 1; a
	   fixed kernel will make it exit with SIGKILL before it does anything.
	*/

	#define _GNU_SOURCE
	#include <assert.h>
	#include <inttypes.h>
	#include <stdio.h>
	#include <linux/prctl.h>
	#include <sys/stat.h>
	#include <unistd.h>
	#include <asm/unistd.h>

	int
	main (int argc, char **argv)
	{
	  char buf[100];
	  static const char dot[] = ".";
	  long ret;
	  unsigned st[24];

	  if (prctl (PR_SET_SECCOMP, 1, 0, 0, 0) != 0)
	    perror ("prctl(PR_SET_SECCOMP) -- not compiled into kernel?");

	#ifdef __x86_64__
	  assert ((uintptr_t) dot < (1UL << 32));
	  asm ("int $0x80 # %0 <- %1(%2 %3)"
	       : "=a" (ret) : "0" (15), "b" (dot), "c" (0777));
	  ret = snprintf (buf, sizeof buf,
			  "result %ld (check mode on .!)\n", ret);
	#elif defined __i386__
	  asm (".code32\n"
	       "pushl %%cs\n"
	       "pushl $2f\n"
	       "ljmpl $0x33, $1f\n"
	       ".code64\n"
	       "1: syscall # %0 <- %1(%2 %3)\n"
	       "lretl\n"
	       ".code32\n"
	       "2:"
	       : "=a" (ret) : "0" (4), "D" (dot), "S" (&st));
	  if (ret == 0)
	    ret = snprintf (buf, sizeof buf,
			    "stat . -> st_uid=%u\n", st[7]);
	  else
	    ret = snprintf (buf, sizeof buf, "result %ld\n", ret);
	#else
	# error "not this one"
	#endif

	  write (1, buf, ret);

	  syscall (__NR_exit, 1);
	  return 2;
	}

Signed-off-by: Roland McGrath <roland@redhat.com>
[ I don't know if anybody actually uses seccomp, but it's enabled in
  at least both Fedora and SuSE kernels, so maybe somebody is. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-02 15:41:30 -08:00
David S. Miller
aa4abc9bcc Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/wireless/iwlwifi/iwl-tx.c
	net/8021q/vlan_core.c
	net/core/dev.c
2009-03-01 21:35:16 -08:00
Ingo Molnar
55f2b78995 Merge branch 'x86/urgent' into x86/pat 2009-03-01 12:47:58 +01:00
Grant Likely
6b8036a877 powerpc/4xx: Enable SERIAL_OF support by default for Virtex platforms
Virtex FPGA designs have two serial port logic cores to choose from; the
simple uartlite, and the full featured uart16550.  Both cores are in
common use so the defconfig should support both of them.  Currently
only console on uartlite is supported in the defconfig.  This patch adds
console support for the 16550 core.

The Virtex reference designs do not work without this patch.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-02-28 21:30:38 -07:00
Grant Likely
aafbf16b89 powerpc/5200: Add 'simple-bus' to the of_platform probe list.
To better match the ePAPR specification, device nodes which claim
"simple-bus" compatibility should be probed by default.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-02-26 23:19:36 -07:00
Grzegorz Bernacki
86f5a4a7d7 powerpc/5200: On the digsy-mtc, configure PSC4 and PSC5 as UARTs
On digsy MTC PSC4 and PSC5 should be configured as UART, not PSC3 and PSC4.

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-02-26 22:55:29 -07:00
Grzegorz Bernacki
652b2db16f powerpc/5200: Add digsy-mtc support to mpc5200_defconfig
The following options are enabled to support the digsy-mtc.
 - LXT phy
 - AT24 eeprom
 - RTC (DS1337)
 - MTD partitioning based on OF description

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-02-26 22:55:03 -07:00
Benjamin Herrenschmidt
1ac00cc213 powerpc/44x: Fix address decoding setup of PCI 2.x cells
The PCI 2.x cells used on some 44x SoCs only let us configure the decode
for the low 32-bit of the incoming PLB addresses. The top 4 bits (this
is a 36-bit bus) are hard wired to different values depending on the
specific SoC in use. Our code used to work "by accident" until I added
support for the ISA memory holes and while at it added more validity
checking of the addresses.

This patch should bring it back to working condition. It still relies
on the device-tree being correct but that's somewhat a pre-requisite
for anything to work anyway.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-02-27 09:30:17 +11:00
Ingo Molnar
0c489c47d4 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/perfcounters into perfcounters/core 2009-02-26 13:03:29 +01:00
Ingo Molnar
8e818179eb Merge branch 'x86/core' into perfcounters/core
Conflicts:
	arch/x86/kernel/apic/apic.c
	arch/x86/kernel/irqinit_32.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26 13:02:23 +01:00
Paul Mackerras
f3dfd2656d perfcounters: fix a few minor cleanliness issues
This fixes three issues noticed by Arnd Bergmann:

- Add #ifdef __KERNEL__ and move some things around in perf_counter.h
  to make sure only the bits that userspace needs are exported to
  userspace.

- Use __u64, __s64, __u32 types in the structs exported to userspace
  rather than u64, s64, u32.

- Make the sys_perf_counter_open syscall available to the SPUs on
  Cell platforms.

And one issue that I noticed in looking at the code again:

- Wrap the perf_counter_open syscall with SYSCALL_DEFINE4 so we get
  the proper handling of int arguments on ppc64 (and some other 64-bit
  architectures).

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-02-26 22:43:46 +11:00
Paul Mackerras
742bd95ba9 perfcounters/powerpc: Add support for POWER5 processors
This adds the back-end for the PMU on the POWER5 processor.  This knows
how to use the fixed-function PMC5 and PMC6 (instructions completed and
run cycles).  Unlike POWER6, PMC5/6 obey the freeze conditions and can
generate interrupts, so their use doesn't impose any extra restrictions.

POWER5+ is different and is not supported by this patch.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-02-26 15:36:48 +11:00
Mark Nelson
f72b728bf1 powerpc: Fix 64bit __copy_tofrom_user() regression
This fixes a regression introduced by commit
a4e22f02f5 ("powerpc: Update 64bit
__copy_tofrom_user() using CPU_FTR_UNALIGNED_LD_STD").

The same bug that existed in the 64bit memcpy() also exists here so fix
it here too. The fix is the same as that applied to memcpy() with the
addition of fixes for the exception handling code required for
__copy_tofrom_user().

This stops us reading beyond the end of the source region we were told
to copy.

Signed-off-by: Mark Nelson <markn@au1.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-26 14:02:54 +11:00
Mark Nelson
e423b9ecd6 powerpc: Fix 64bit memcpy() regression
This fixes a regression introduced by commit
25d6e2d7c5 ("powerpc: Update 64bit memcpy()
using CPU_FTR_UNALIGNED_LD_STD").

This commit allowed CPUs that have the CPU_FTR_UNALIGNED_LD_STD CPU
feature bit present to do the memcpy() with unaligned load doubles. But,
along with this came a bug where our final load double would read bytes
beyond a page boundary and into the next (unmapped) page. This was caught
by enabling CONFIG_DEBUG_PAGEALLOC,

The fix was to read only the number of bytes that we need to store rather
than reading a full 8-byte doubleword and storing only a portion of that.

In order to minimise the amount of existing code touched we use the
original do_tail for the src_unaligned case.

Below is an example of the regression, as reported by Sachin Sant:

Unable to handle kernel paging request for data at address 0xc00000003f380000
Faulting instruction address: 0xc000000000039574
cpu 0x1: Vector: 300 (Data Access) at [c00000003baf3020]
    pc: c000000000039574: .memcpy+0x74/0x244
    lr: d00000000244916c: .ext3_xattr_get+0x288/0x2f4 [ext3]
    sp: c00000003baf32a0
   msr: 8000000000009032
   dar: c00000003f380000
 dsisr: 40000000
  current = 0xc00000003e54b010
  paca    = 0xc000000000a53680
    pid   = 1840, comm = readahead
enter ? for help
[link register   ] d00000000244916c .ext3_xattr_get+0x288/0x2f4 [ext3]
[c00000003baf32a0] d000000002449104 .ext3_xattr_get+0x220/0x2f4 [ext3]
(unreliab
le)
[c00000003baf3390] d00000000244a6e8 .ext3_xattr_security_get+0x40/0x5c [ext3]
[c00000003baf3400] c000000000148154 .generic_getxattr+0x74/0x9c
[c00000003baf34a0] c000000000333400 .inode_doinit_with_dentry+0x1c4/0x678
[c00000003baf3560] c00000000032c6b0 .security_d_instantiate+0x50/0x68
[c00000003baf35e0] c00000000013c818 .d_instantiate+0x78/0x9c
[c00000003baf3680] c00000000013ced0 .d_splice_alias+0xf0/0x120
[c00000003baf3720] d00000000243e05c .ext3_lookup+0xec/0x134 [ext3]
[c00000003baf37c0] c000000000131e74 .do_lookup+0x110/0x260
[c00000003baf3880] c000000000134ed0 .__link_path_walk+0xa98/0x1010
[c00000003baf3970] c0000000001354a0 .path_walk+0x58/0xc4
[c00000003baf3a20] c000000000135720 .do_path_lookup+0x138/0x1e4
[c00000003baf3ad0] c00000000013645c .path_lookup_open+0x6c/0xc8
[c00000003baf3b70] c000000000136780 .do_filp_open+0xcc/0x874
[c00000003baf3d10] c0000000001251e0 .do_sys_open+0x80/0x140
[c00000003baf3dc0] c00000000016aaec .compat_sys_open+0x24/0x38
[c00000003baf3e30] c00000000000855c syscall_exit+0x0/0x40

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-26 14:02:53 +11:00
Michael Neuling
49f297f8df powerpc: Fix load/store float double alignment handler
When we introduced VSX, we changed the way FPRs are stored in the
thread_struct.  Unfortunately we missed the load/store float double
alignment handler code when updating how we access FPRs in the
thread_struct.

Below fixes this and merges the little/big endian case.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-26 14:02:53 +11:00
David S. Miller
e70049b9e7 Merge branch 'master' of /home/davem/src/GIT/linux-2.6/ 2009-02-24 03:50:29 -08:00
Paul Mackerras
d095cd46da perfcounters/powerpc: Make exclude_kernel bit work on Apple G5 processors
Currently, setting hw_event.exclude_kernel does nothing on the PPC970
variants used in Apple G5 machines, because they have the HV (hypervisor)
bit in the MSR forced to 1, so as far as the PMU is concerned, the
kernel runs in hypervisor mode.  Thus we have to use the MMCR0_FCHV
(freeze counters in hypervisor mode) bit rather than the MMCR0_FCS
(freeze counters in supervisor mode) bit.

This checks the MSR.HV bit at startup, and if it is set, we set the
freeze_counters_kernel variable to MMCR0_FCHV (it was initialized to
MMCR0_FCS).  We then use that whenever we need to exclude kernel events.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-02-23 23:01:28 +11:00
Anton Blanchard
501cb16d3c powerpc: Randomise PIEs
Randomise ELF_ET_DYN_BASE, which is used when loading position independent
executables.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:21 +11:00
Anton Blanchard
002b0ec73d powerpc: Increase stack gap on 64bit binaries
On 64bit there is a possibility our stack and mmap randomisation will put
the two close enough such that we can't expand our stack to match the ulimit
specified.

To avoid this, start the upper mmap address at 1GB + 128MB below the top of our
address space, so in the worst case we end up with the same ~128MB hole as in
32bit. This works because we randomise the stack over a 1GB range.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:21 +11:00
Anton Blanchard
a5adc91a4b powerpc: Ensure random space between stack and mmaps
get_random_int() returns the same value within a 1 jiffy interval. This means
that the mmap and stack regions will almost always end up the same distance
apart, making a relative offset based attack possible.

To fix this, shift the randomness we use for the mmap region by 1 bit.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:21 +11:00
Anton Blanchard
912f9ee21c powerpc: Randomise the brk region
Randomize the heap.

before:
tundro2:~ # sleep 1 & cat /proc/${!}/maps | grep heap
10017000-10118000 rw-p 10017000 00:00 0                                  [heap]
10017000-10118000 rw-p 10017000 00:00 0                                  [heap]
10017000-10118000 rw-p 10017000 00:00 0                                  [heap]
10017000-10118000 rw-p 10017000 00:00 0                                  [heap]
10017000-10118000 rw-p 10017000 00:00 0                                  [heap]

after
tundro2:~ # sleep 1 & cat /proc/${!}/maps | grep heap
19419000-1951a000 rw-p 19419000 00:00 0                                  [heap]
325ff000-32700000 rw-p 325ff000 00:00 0                                  [heap]
1a97c000-1aa7d000 rw-p 1a97c000 00:00 0                                  [heap]
1cc60000-1cd61000 rw-p 1cc60000 00:00 0                                  [heap]
1afa9000-1b0aa000 rw-p 1afa9000 00:00 0                                  [heap]

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:20 +11:00
Anton Blanchard
d839088cae powerpc: Randomise lower bits of stack address
Randomise the lower bits of the stack address. More randomisation is good for
security but the scatter can also help with SMT threads that share an L1. A
quick test case shows this working:

int main()
{
	int sp;
	printf("%x\n", (unsigned long)&sp & 4095);
}

before:
80
80
80
80
80

after:
610
490
300
6b0
d80

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:20 +11:00
Anton Blanchard
2dadb987e0 powerpc: More stack randomisation for 64bit binaries
At the moment we randomise the stack by 8MB on 32bit and 64bit tasks. Since we
have a lot more address space to play with on 64bit, lets do what x86 does and
increase that randomisation to 1GB:

before:
# for i in seq `1 10` ; do sleep 1 & cat /proc/${!}/maps | grep stack; done
fffffebc000-fffffed1000 rw-p ffffffeb000 00:00 0       [stack]
ffffff5a000-ffffff6f000 rw-p ffffffeb000 00:00 0       [stack]
fffffdb2000-fffffdc7000 rw-p ffffffeb000 00:00 0       [stack]
fffffd3e000-fffffd53000 rw-p ffffffeb000 00:00 0       [stack]
fffffad9000-fffffaee000 rw-p ffffffeb000 00:00 0       [stack]

after:
# for i in seq `1 10` ; do sleep 1 & cat /proc/${!}/maps | grep stack; done
ffff5c27000-ffff5c3c000 rw-p ffffffeb000 00:00 0       [stack]
fffebe5e000-fffebe73000 rw-p ffffffeb000 00:00 0       [stack]
fffcb298000-fffcb2ad000 rw-p ffffffeb000 00:00 0       [stack]
fffc719d000-fffc71b2000 rw-p ffffffeb000 00:00 0       [stack]
fffe01af000-fffe01c4000 rw-p ffffffeb000 00:00 0       [stack]

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:07 +11:00
Anton Blanchard
9f14c42d75 powerpc: Randomise mmap start address
Randomise mmap start address - 8MB on 32bit and 1GB on 64bit tasks.
Until ppc32 uses the mmap.c functionality, this is ppc64 specific.

Before:

# ./test & cat /proc/${!}/maps|tail -2|head -1
f75fe000-f7fff000 rw-p f75fe000 00:00 0
f75fe000-f7fff000 rw-p f75fe000 00:00 0
f75fe000-f7fff000 rw-p f75fe000 00:00 0
f75fe000-f7fff000 rw-p f75fe000 00:00 0
f75fe000-f7fff000 rw-p f75fe000 00:00 0

After:
# ./test & cat /proc/${!}/maps|tail -2|head -1
f718b000-f7b8c000 rw-p f718b000 00:00 0
f7551000-f7f52000 rw-p f7551000 00:00 0
f6ee7000-f78e8000 rw-p f6ee7000 00:00 0
f74d4000-f7ed5000 rw-p f74d4000 00:00 0
f6e9d000-f789e000 rw-p f6e9d000 00:00 0

Similar for 64bit, but with 1GB of scatter:
# ./test & cat /proc/${!}/maps|tail -2|head -1
fffb97b5000-fffb97b6000 rw-p fffb97b5000 00:00 0
fffce9a3000-fffce9a4000 rw-p fffce9a3000 00:00 0
fffeaaf2000-fffeaaf3000 rw-p fffeaaf2000 00:00 0
fffd88ac000-fffd88ad000 rw-p fffd88ac000 00:00 0
fffbc62e000-fffbc62f000 rw-p fffbc62e000 00:00 0

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:07 +11:00
Anton Blanchard
13a2cb3694 powerpc: Rearrange mmap.c
Rearrange mmap.c to better match the x86 version.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:06 +11:00
Anton Blanchard
a465f9b694 powerpc: Move is_32bit_task
Move is_32bit_task into asm/thread_info.h, that allows us to test for
32/64bit tasks without an ugly CONFIG_PPC64 ifdef.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:06 +11:00
Giuliano Pochini
4c4ece3cf8 powerpc/powermac: Hotplug /sys entries are missing
On Wed, 18 Feb 2009 22:18:21 +0100
Giuliano Pochini <pochini@shiny.it> wrote:

Since 2.6.28, /sys/devices/system/cpu/cpu*/online don't exist anymore
on 32-bit PowerMacs due to change in the generic powerpc code.

Signed-off-by: Giuliano Pochini <pochini@shiny.it>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:06 +11:00
Benjamin Krill
41fd81cc56 powerpc/cell: Add rtas rtc calls for the QPACE platform
The new firmware release exports further RTC calls. This
patch adds these calls to the QPACE platform setup file.

Signed-off-by: Benjamin Krill <ben@codiert.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:05 +11:00
Michael Neuling
553631e25f powerpc: Fix load/store float double alignment handler
When we introduced VSX, we changed the way FPRs are stored in the
thread_struct.  Unfortunately we missed the load/store float double
alignment handler code when updating how we access FPRs in the
thread_struct.

Below fixes this and merges the little/big endian case.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:05 +11:00
Michael Neuling
545bba1824 powerpc: Add alignment handler for new lfiwzx instruction
lfiwzx is a new floating point load instruction in 2.06 that needs an
alignment handler for Linux.

Turns out to be the worlds easiest handler to add.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:04 +11:00
Nathan Fontenot
0f16ef7fd3 powerpc/numa: Cleanup hot_add_scn_to_nid
This patch reworks the hot_add_scn_to_nid and its supporting functions
to make them easier to understand.  There are no functional changes in
this patch and has been tested on machine with memory represented in the
device tree as memory nodes and in the ibm,dynamic-memory property.

My previous patch that introduced support for hotplug memory add on
systems whose memory was represented by the ibm,dynamic-memory property
of the device tree only left the code more unintelligible.  This
will hopefully makes things easier to understand.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:04 +11:00
Brian King
f52862f407 powerpc/pseries: Fix partition migration hang under load
While testing partition migration with heavy CPU load using
shared processors, it was observed that sometimes the migration
would never complete and would appear to hang. Currently, the
migration code assumes that if H_SUCCESS is returned from the H_JOIN
then the migration is complete and the processor is waking up on
the target system. If there was an outstanding PROD to the processor
when the H_JOIN is called, however, it will return H_SUCCESS on the source
system, causing the migration to hang, or in some scenarios cause
the kernel to crash on the complete call waking the caller
of rtas_percpu_suspend_me. Fix this by calling H_JOIN multiple times
if necessary during the migration.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:04 +11:00
Michael Ellerman
448e2ca0e3 powerpc/pseries: Implement a quota system for MSIs
There are hardware limitations on the number of available MSIs,
which firmware expresses using a property named "ibm,pe-total-#msi".
This property tells us how many MSIs are available for devices below
the point in the PCI tree where we find the property.

For old firmwares which don't have the property, we assume there are
8 MSIs available per "partitionable endpoint" (PE). The PE can be
found using existing EEH code, which uses the methods described in
PAPR. For our purposes we want the parent of the node that's
identified using this method.

When a driver requests n MSIs for a device, we first establish where
the "ibm,pe-total-#msi" property above that device is, or we find the
PE if the property is not found. In both cases we call this node
the "pe_dn".

We then count all non-bridge devices below the pe_dn, to establish
how many devices in total may need MSIs. The quota is then simply the
total available divided by the number of devices, if the request is
less than or equal to the quota, the request is fine and we're done.

If the request is greater than the quota, we try to determine if there
are any "spare" MSIs which we can give to this device. Spare MSIs are
found by looking for other devices which can never use their full
quota, because their "req#msi(-x)" property is less than the quota.

If we find any spare, we divide the spares by the number of devices
that could request more than their quota. This ensures the spare
MSIs are spread evenly amongst all over-quota requestors.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:03 +11:00
Michael Ellerman
d523cc379d powerpc/pseries: Return req#msi(-x) if request is larger
If a driver asks for more MSIs than the devices "req#msi(-x)" property,
we currently return -ENOSPC. This doesn't give the driver any chance to
make a new request with a number that might work.

So if "req#msi(-x)" is less than the request, return its value. To be
100% safe, make sure we return an error if req_msi == 0.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:03 +11:00
Kumar Gala
620165f971 powerpc: Add support for using doorbells for SMP IPI
The e500mc supports the new msgsnd/doorbell mechanisms that were added in
the Power ISA 2.05 architecture.  We use the normal level doorbell for
doing SMP IPIs at this point.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:03 +11:00
Arnd Bergmann
6ed8d12849 powerpc/cell: Fix dependency in cpufreq
cbe_cpufreq has a partial dependency on cbe_cpufreq_pmi, which cannot
be easily expressed in Kconfig. This fixes it by introducing an
extra Kconfig symbol CBE_CPUFREQ_PMI_ENABLE. To make the dependency
clearer, turn PPC_PMI into an automatic symbol.

Reported-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:02 +11:00
Jeremy Kerr
74254647e0 powerpc/spufs: Constify context contents and coredump callback constants
The spufs context directory contents definitions are not changed after
initialisation, so we can declare them as const. We can do the same
with the spu coredump reader callbacks too.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:59 +11:00
Jeremy Kerr
3688b46b89 powerpc/spufs: Clear purge status before setting up isolated mode
Currently, we may setup the MFC for isolated mode initilaisation with
the purge still active. This means that DMAs required to perform the
init do not happen.

This change clears the purge status after doing the purge, so that
the isolated init can proceed.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:59 +11:00
Jeremy Kerr
60ee031940 powerpc/spufs: Use correct return value for spu_handle_mm_fault
Currently, spu_handle_mm_fault disregards the 'ret' variable and always
returns -EFAULT on error.

This change refactos spu_handle_mm_fault a little, to return the
ret variable as appropriate. This allows us to combine the error and
sucess paths.

Also, remove the #if-0-ed IS_VALID_EA() check, it has never been
used.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:58 +11:00
Anton Blanchard
13870b6575 powerpc/mm: Reduce hashtable size when using 64kB pages
At the moment we size the hashtable based on 4kB pages / 2, even on a
64kB kernel. This results in a hashtable that is much larger than it
needs to be.

Grab the real page size and size the hashtable based on that

Note: This only has effect on non hypervisor machines.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:58 +11:00
Ilya Yanok
33f00dcedb powerpc: Rework dma-noncoherent to use generic vmalloc layer
This patch rewrites consistent dma allocations support to use vmalloc
layer to allocate virtual memory space from vmalloc pool and get rid
of CONFIG_CONSISTENT_{START,SIZE}.

This greatly simplifies the code by effectively removing a custom
allocator we had for virtual space.

Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:57 +11:00
Kumar Gala
812d904e39 powerpc: Fix warnings from make headers_check
include/asm/bootx.h:12: include of <linux/types.h> is preferred over <asm/types.h>
include/asm/bootx.h:57: found __[us]{8,16,32,64} type without #include <linux/types.h>
include/asm/elf.h:5: include of <linux/types.h> is preferred over <asm/types.h>
include/asm/kvm.h:23: include of <linux/types.h> is preferred over <asm/types.h>
include/asm/kvm.h:26: found __[us]{8,16,32,64} type without #include <linux/types.h>
include/asm/ps3fb.h:33: found __[us]{8,16,32,64} type without #include <linux/types.h>
include/asm/spu_info.h:27: found __[us]{8,16,32,64} type without #include <linux/types.h>
include/asm/swab.h:11: include of <linux/types.h> is preferred over <asm/types.h>

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:57 +11:00
Tom Arbuckle
f81786913a powerpc/pci: Fix PCI<->OF matching of old style multifunc devices
Old OF variants used to create a 'dummy' parent node "multifunc-device"
for devices with more than one PCI function. Our code that matches OF
nodes to PCI devices dealt with that in one place but not in another,
this fixes it.

This has the practical effect of fixing interrupt routing of multifunction
PCI cards on some older PowerMac machines.

Signed-off-by: Tom Arbuckle <tom.d.arbuckle@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:57 +11:00
Kumar Gala
16c57b3620 powerpc: Unify opcode definitions and support
Create a new header that becomes a single location for defining PowerPC
opcodes used by code that is either generationg instructions
at runtime (fixups, debug, etc.), emulating instructions, or just
compiling instructions old assemblers don't know about.

We currently don't handle the floating point emulation or alignment decode
as both are better handled by the specific decode support they already
have.

Added support for the new dcbzl, dcbal, msgsnd, tlbilx, & wait instructions
since older assemblers don't know about them.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:56 +11:00
Steven Rostedt
bb9b903527 powerpc, ftrace: use create_branch lib function
Impact: clean up, remove duplicate code

When ftrace was first ported to PowerPC, there existed a
create_function_call that would create the instruction to make a call
to a given address. Unfortunately, this call expected to write to
the address it was given, and since it used the address to calculate
the offset, it could not be faked.

ftrace needed a way to create the instruction without actually writing
that instruction to the text section. So ftrace had to implement its
own code.

Now we have create_branch in the code patching library, which does
exactly what ftrace needs. This patch replaces ftrace's implementation
with the library function.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:56 +11:00
Steven Rostedt
b54dcfe108 powerpc, ftrace: use unsigned int for instruction manipulation
The original port of ftrace to PowerPC kept a lot of the code used
by x86. Some of this code was to handle x86's 5 byte instruction.
This was handled by using character arrays to manipulate the
code.

PowerPC has a consistent 4 byte instruction. Using unsigned ints
makes the code more efficient as well as more readable.
By converting to use unsigned ints to represent instructions,
I was able to remove the side effects that were needed for
manipulating character strings.

  i.e. memcpy and memcmp

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:55 +11:00
Steven Rostedt
60ce8f7260 powerpc32, ftrace: dynamic function graph tracer
This patch gets function graph tracing working with dynamic function
tracer on PowerPC32.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:55 +11:00
Steven Rostedt
fad4f47cc8 powerpc32, ftrace: port function graph tracer to ppc32, static only
This patch ports the function graph tracer for PowerPC, but only
for static function tracing.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:55 +11:00
Steven Rostedt
bf528a3a9b powerpc32, ftrace: save and restore mcount regs with macro
Impact: clean up

Use a macro to save and restore the registers for PowerPC32,
since that code is duplicated.

This is similar to the work done by Cyrill Gorcunov for the
mcount code in x86_64.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:54 +11:00
Steven Rostedt
bb7253403f powerpc64, ftrace: save toc only on modules for function graph
The TOCS used by modules are different than the one used by
the core kernel code. The function graph tracer must save and
restore the TOC whenever it traces a module call. But this
is an added overhead to burden the majority of core kernel
code being traced.

Benjamin Herrenschmidt suggested in testing the entry of
the call to tell if it is a core kernel function or a module.
He recommended using the REGION_ID() macro to perform this test.

This patch implements Benjamin's idea, and uses a different
return_to_handler routine dependent on if the entry is a core
kernel function or not. The module version saves the TOC, where as
the core kernel version does not.

Geoff Lavand tested on PS3.

Tested-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:54 +11:00
Steven Rostedt
4654288847 powerpc64, tracing: add function graph tracer with dynamic tracing
This is the port of the function graph tracer to PowerPC with
dynamic tracing.

Geoff Lavand tested on PS3.

Tested-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:54 +11:00
Steven Rostedt
6794c78243 powerpc64: port of the function graph tracer
This is a port of the function graph tracer that was written by
Frederic Weisbecker for the x86.

This only works for PPC64 at the moment and only for static tracing.
PPC32 and dynamic function graph tracing support will come later.

The trace produces a visual calling of functions:

 # tracer: function_graph
 #
 # CPU  DURATION                  FUNCTION CALLS
 # |     |   |                     |   |   |   |
  0)   2.224 us    |                        }
  0) ! 271.024 us  |                      }
  0) ! 320.080 us  |                    }
  0) ! 324.656 us  |                  }
  0) ! 329.136 us  |                }
  0)               |                .put_prev_task_fair() {
  0)               |                  .update_curr() {
  0)   2.240 us    |                    .update_min_vruntime();
  0)   6.512 us    |                  }
  0)   2.528 us    |                  .__enqueue_entity();
  0) + 15.536 us   |                }
  0)               |                .pick_next_task_fair() {
  0)   2.032 us    |                  .__pick_next_entity();
  0)   2.064 us    |                  .__clear_buddies();
  0)               |                  .set_next_entity() {
  0)   2.672 us    |                    .__dequeue_entity();
  0)   6.864 us    |                  }

Geoff Lavand tested on PS3.

Tested-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:53 +11:00
Steven Rostedt
17be5b3ddf powerpc, ftrace: fix compile error when modules not configured
Michael Neuling reported a compile bug when dynamic ftrace was
configured in and modules were not. This was due to the ftrace
code referencing module specific structures.

Reported-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:53 +11:00
Steven Rostedt
44e1d064b9 ftrace, powerpc: replace debug macro with proper pr_deug
Impact: cleanup

The PowerPC ftrace code uses a hacked up DEBUGP macro for prints.
This patch converts it to the standard pr_debug.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 10:48:52 +11:00
Ingo Molnar
fc6fc7f1b1 Merge branch 'linus' into x86/apic
Conflicts:
	arch/x86/mach-default/setup.c

Semantic conflict resolution:
	arch/x86/kernel/setup.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-22 20:05:19 +01:00
Ingo Molnar
3b6f7b9beb Merge branch 'x86/urgent' into x86/core 2009-02-20 17:40:43 +01:00
Ingo Molnar
74019224ac timers: add mod_timer_pending()
Impact: new timer API

Based on an idea from Martin Josefsson with the help of
Patrick McHardy and Stephen Hemminger:

introduce the mod_timer_pending() API which is a mod_timer()
offspring that is an invariant on already removed timers.

(regular mod_timer() re-activates non-pending timers.)

This is useful for the networking code in that it can
allow unserialized mod_timer_pending() timer-forwarding
calls, but a single del_timer*() will stop the timer
from being reactivated again.

Also while at it:

- optimize the regular mod_timer() path some more, the
  timer-stat and a debug check was needlessly duplicated
  in __mod_timer().

- make the exports come straight after the function, as
  most other exports in timer.c already did.

- eliminate __mod_timer() as an external API, change the
  users to mod_timer().

The regular mod_timer() code path is not impacted
significantly, due to inlining optimizations and due to
the simplifications.

Based-on-patch-from: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Cc: netdev@vger.kernel.org
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-18 19:26:33 +01:00
James Hsiao
049359d655 crypto: amcc - Add crypt4xx driver
This patch adds support for AMCC ppc4xx security device driver. This is the
initial release that includes the driver framework with AES and SHA1 algorithms
support.

The remaining algorithms will be released in the near future.

Signed-off-by: James Hsiao <jhsiao@amcc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2009-02-18 16:49:43 +08:00
Benjamin Herrenschmidt
3b7faeb49e Merge commit 'kumar/next' into next 2009-02-18 13:23:30 +11:00
Benjamin Herrenschmidt
82a0a1cc8f Merge commit 'origin/master' into next
Manual merge of:
	arch/powerpc/include/asm/pgtable-ppc32.h
2009-02-18 13:19:25 +11:00
Linus Torvalds
b30b774930 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/vsx: Fix VSX alignment handler for regs 32-63
  powerpc/ps3: Move ps3_mm_add_memory to device_initcall
  powerpc/mm: Fix numa reserve bootmem page selection
  powerpc/mm: Fix _PAGE_CHG_MASK to protect _PAGE_SPECIAL
2009-02-17 14:23:49 -08:00
Ingo Molnar
0b6de00922 Merge branch 'x86/apic' into perfcounters/core
Conflicts:
	arch/x86/kernel/cpu/perfctr-watchdog.c
2009-02-17 17:20:11 +01:00
Patrick Ohly
cb9eff0978 net: new user space API for time stamping of incoming and outgoing packets
User space can request hardware and/or software time stamping.
Reporting of the result(s) via a new control message is enabled
separately for each field in the message because some of the
fields may require additional computation and thus cause overhead.
User space can tell the different kinds of time stamps apart
and choose what suits its needs.

When a TX timestamp operation is requested, the TX skb will be cloned
and the clone will be time stamped (in hardware or software) and added
to the socket error queue of the skb, if the skb has a socket
associated with it.

The actual TX timestamp will reach userspace as a RX timestamp on the
cloned packet. If timestamping is requested and no timestamping is
done in the device driver (potentially this may use hardware
timestamping), it will be done in software after the device's
start_hard_xmit routine.

Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15 22:43:33 -08:00
Sheng Yang
ad8ba2cd44 KVM: Add kvm_arch_sync_events to sync with asynchronize events
kvm_arch_sync_events is introduced to quiet down all other events may happen
contemporary with VM destroy process, like IRQ handler and work struct for
assigned device.

For kvm_arch_sync_events is called at the very beginning of kvm_destroy_vm(), so
the state of KVM here is legal and can provide a environment to quiet down other
events.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-02-15 02:47:36 +02:00
Madhulika Madishetty
6c71209023 AMCC PPC 460SX redwood SoC platform initial framework
This patch contains initial framework for the AMCC Redwood board.

Signed-off-by: Madhulika Madishetty <mmadishetty@amcc.com>
Signed-off-by: Tirumala Marri <tmarri@amcc.com>
Signed-off-by: Feng Kan <fkan@amcc.com>
Signed-off-by: Vidhyananth Venkatasamy <vvenkatasamy@amcc.com>
Signed-off-by: Preetesh Parekh <pparekh@amcc.com>
Acked-by: Loc Ho <lho@amcc.com>
Acked-by: Feng Kan <fkan@amcc.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-02-14 14:41:29 -05:00
Benjamin Herrenschmidt
41b6a085e4 powerpc/4xx: Enable PCI domains on 4xx
4xx chips commonly now have multiple PHBs, there is no reason to not
enable PCI domains on them. The main issue with PCI domains is X but
currently its already somewhat busted for other reasons such as the
36-bit physical address space, which I'm fixing separately.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-02-14 14:40:11 -05:00
Benjamin Herrenschmidt
018f76ec51 powerpc/4xx: Add missing USB and i2c devices to Canyonlands
This adds the device-tree entries for a handful of devices on the
Canyonlands board, such as the EHCI and OHCI controllers, the real
time clock and the AD7414 thermal monitor.

I also updated the defconfig to enable various options related to
these devices.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-02-14 14:40:08 -05:00
Yuri Tikhonov
e12401222f powerpc/44x: Support for 256KB PAGE_SIZE
This patch adds support for 256KB pages on ppc44x-based boards.

For simplification of implementation with 256KB pages we still assume
2-level paging. As a side effect this leads to wasting extra memory space
reserved for PTE tables: only 1/4 of pages allocated for PTEs are
actually used. But this may be an acceptable trade-off to achieve the
high performance we have with big PAGE_SIZEs in some applications (e.g.
RAID).

Also with 256KB PAGE_SIZE we increase THREAD_SIZE up to 32KB to minimize
the risk of stack overflows in the cases of on-stack arrays, which size
depends on the page size (e.g. multipage BIOs, NTFS, etc.).

With 256KB PAGE_SIZE we need to decrease the PKMAP_ORDER at least down
to 9, otherwise all high memory (2 ^ 10 * PAGE_SIZE == 256MB) we'll be
occupied by PKMAP addresses leaving no place for vmalloc. We do not
separate PKMAP_ORDER for 256K from 16K/64K PAGE_SIZE here; actually that
value of 10 in support for 16K/64K had been selected rather intuitively.
Thus now for all cases of PAGE_SIZE on ppc44x (including the default, 4KB,
one) we have 512 pages for PKMAP.

Because ELF standard supports only page sizes up to 64K, then you should
use binutils later than 2.17.50.0.3 with '-zmax-page-size' set to 256K
for building applications, which are to be run with the 256KB-page sized
kernel. If using the older binutils, then you should patch them like follows:

	--- binutils/bfd/elf32-ppc.c.orig
	+++ binutils/bfd/elf32-ppc.c

	-#define ELF_MAXPAGESIZE                0x10000
	+#define ELF_MAXPAGESIZE                0x40000

One more restriction we currently have with 256KB page sizes is inability
to use shmem safely, so, for now, the 256KB is available only if you turn
the CONFIG_SHMEM option off (another variant is to use BROKEN).
Though, if you need shmem with 256KB pages, you can always remove the !SHMEM
dependency in 'config PPC_256K_PAGES', and use the workaround available here:
 http://lkml.org/lkml/2008/12/19/20

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-02-14 14:40:04 -05:00
Ingo Molnar
22796b1572 Merge branch 'core/header-fixes' into x86/headers
Conflicts:
	arch/x86/include/asm/setup.h
2009-02-13 21:05:03 +01:00
Ingo Molnar
8f8573ae9f Merge branches 'irq/genirq', 'irq/sparseirq' and 'irq/urgent' into irq/core 2009-02-13 11:57:18 +01:00
Ingo Molnar
f8a6b2b9ce Merge branch 'linus' into x86/apic
Conflicts:
	arch/x86/kernel/acpi/boot.c
	arch/x86/mm/fault.c
2009-02-13 09:44:22 +01:00
Ingo Molnar
e9c4ffb11f Merge branch 'linus' into perfcounters/core
Conflicts:
	arch/x86/kernel/acpi/boot.c
2009-02-13 09:34:07 +01:00
Michael Neuling
26456dcfb8 powerpc/vsx: Fix VSX alignment handler for regs 32-63
Fix the VSX alignment handler for VSX registers > 32.  32-63 are stored
in the VMX part of the thread_struct not the FPR part.

Signed-off-by: Michael Neuling <mikey@neuling.org>
CC: stable@kernel.org (2.6.27 & .28 please)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-13 16:37:45 +11:00
Geoff Levand
0047656e2a powerpc/ps3: Move ps3_mm_add_memory to device_initcall
Change the PS3 hotplug memory routine ps3_mm_add_memory() from
a core_initcall to a device_initcall.

core_initcall routines run before the powerpc topology_init()
startup routine, which is a subsys_initcall, resulting in
failure of ps3_mm_add_memory() when CONFIG_NUMA=y.  When
ps3_mm_add_memory() fails the system will boot with just the
128 MiB of boot memory

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-13 16:37:45 +11:00
Dave Hansen
06eccea6c3 powerpc/mm: Fix numa reserve bootmem page selection
Fix the powerpc NUMA reserve bootmem page selection logic.

commit 8f64e1f2d1 (powerpc: Reserve
in bootmem lmb reserved regions that cross NUMA nodes) changed
the logic for how the powerpc LMB reserved regions were converted
to bootmen reserved regions.  As the folowing discussion reports,
the new logic was not correct.

mark_reserved_regions_for_nid() goes through each LMB on the
system that specifies a reserved area.  It searches for
active regions that intersect with that LMB and are on the
specified node.  It attempts to bootmem-reserve only the area
where the active region and the reserved LMB intersect.  We
can not reserve things on other nodes as they may not have
bootmem structures allocated, yet.

We base the size of the bootmem reservation on two possible
things.  Normally, we just make the reservation start and
stop exactly at the start and end of the LMB.

However, the LMB reservations are not aware of NUMA nodes and
on occasion a single LMB may cross into several adjacent
active regions.  Those may even be on different NUMA nodes
and will require separate calls to the bootmem reserve
functions.  So, the bootmem reservation must be trimmed to
fit inside the current active region.

That's all fine and dandy, but we trim the reservation
in a page-aligned fashion.  That's bad because we start the
reservation at a non-page-aligned address: physbase.

The reservation may only span 2 bytes, but that those bytes
may span two pfns and cause a reserve_size of 2*PAGE_SIZE.

Take the case where you reserve 0x2 bytes at 0x0fff and
where the active region ends at 0x1000.  You'll jump into
that if() statment, but node_ar.end_pfn=0x1 and
start_pfn=0x0.  You'll end up with a reserve_size=0x1000,
and then call

  reserve_bootmem_node(node, physbase=0xfff, size=0x1000);

0x1000 may not be on the same node as 0xfff.  Oops.

In almost all the vm code, end_<anything> is not inclusive.
If you have an end_pfn of 0x1234, page 0x1234 is not
included in the range.  Using PFN_UP instead of the
(>> >> PAGE_SHIFT) will make this consistent with the other VM
code.

We also need to do math for the reserved size with physbase
instead of start_pfn.  node_ar.end_pfn << PAGE_SHIFT is
*precisely* the end of the node.  However,
(start_pfn << PAGE_SHIFT) is *NOT* precisely the beginning
of the reserved area.  That is, of course, physbase.
If we don't use physbase here, the reserve_size can be
made too large.

From: Dave Hansen <dave@linux.vnet.ibm.com>
Tested-by: Geoff Levand <geoffrey.levand@am.sony.com>  Tested on PS3.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-13 16:37:45 +11:00
Philippe Gerum
fbc78b07ba powerpc/mm: Fix _PAGE_CHG_MASK to protect _PAGE_SPECIAL
Fix _PAGE_CHG_MASK so that pte_modify() does not affect the _PAGE_SPECIAL bit.

Signed-off-by: Philippe Gerum <rpm@xenomai.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-13 16:37:44 +11:00
Kumar Gala
96a8bac589 powerpc/fsl-booke: Fix compile warning
arch/powerpc/mm/fsl_booke_mmu.c: In function 'adjust_total_lowmem':
arch/powerpc/mm/fsl_booke_mmu.c:221: warning: format '%ld' expects type 'long int', but argument 3 has type 'phys_addr_t'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-12 16:54:53 -06:00
Kumar Gala
70fe3af840 powerpc/book-3e: Introduce concept of Book-3e MMU
The Power ISA 2.06 spec introduces a standard MMU programming model that
is based on the Freescale Book-E MMU programing model.  The Freescale
version is pretty backwards compatiable with the ISA 2.06 definition so
we are starting to refactor some of the Freescale code so it can be
easily shared.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-12 16:51:33 -06:00
Kumar Gala
d66c82ea45 powerpc/fsl-booke: Add new ISA 2.06 page sizes and MAS defines
The Power ISA 2.06 added power of two page sizes to the embedded MMU
architecture.  Its done it such a way to be code compatiable with the
existing HW.  Made the minor code changes to support both power of two
and power of four page sizes.  Also added some new MAS bits and macros
that are defined as part of the 2.06 ISA.  Renamed some things to use
the 'Book-3e' concept to convey the new MMU that is based on the
Freescale Book-E MMU programming model.

Note, its still invalid to try and use a page size that isn't supported
by cpu.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-12 16:37:11 -06:00
Ingo Molnar
ffc0467293 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/perfcounters into perfcounters/core 2009-02-11 09:22:14 +01:00
Ingo Molnar
95fd4845ed Merge commit 'v2.6.29-rc4' into perfcounters/core
Conflicts:
	arch/x86/kernel/setup_percpu.c
	arch/x86/mm/fault.c
	drivers/acpi/processor_idle.c
	kernel/irq/handle.c
2009-02-11 09:22:04 +01:00
Kumar Gala
a2404746f1 powerpc/85xx: Added 36-bit physical device tree for mpc8572ds board
Added a device tree that should be identical to mpc8572ds.dtb except
the physical addresses for all IO are above the 4G boundary.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-11 00:18:26 -06:00
Kumar Gala
ca34040c40 powerpc/85xx: Fixed PCI IO region sizes in mpc8572ds*.dts
The PCI IO region sizes where incorrectly set to 1M instead of 64k.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-11 00:18:24 -06:00
Kumar Gala
f99fb8a2cb powerpc/mm: Fix _PAGE_COHERENT support on classic ppc32 HW
The following commit:

commit 64b3d0e812
Author: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date:   Thu Dec 18 19:13:51 2008 +0000

    powerpc/mm: Rework usage of _PAGE_COHERENT/NO_CACHE/GUARDED

broke setting of the _PAGE_COHERENT bit in the PPC HW PTE.  Since we now
actually set _PAGE_COHERENT in the Linux PTE we shouldn't be clearing it
out before we propogate it to the PPC HW PTE.

Reported-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 16:07:02 +11:00
Benjamin Herrenschmidt
8d30c14cab powerpc/mm: Rework I$/D$ coherency (v3)
This patch reworks the way we do I and D cache coherency on PowerPC.

The "old" way was split in 3 different parts depending on the processor type:

   - Hash with per-page exec support (64-bit and >= POWER4 only) does it
at hashing time, by preventing exec on unclean pages and cleaning pages
on exec faults.

   - Everything without per-page exec support (32-bit hash, 8xx, and
64-bit < POWER4) does it for all page going to user space in update_mmu_cache().

   - Embedded with per-page exec support does it from do_page_fault() on
exec faults, in a way similar to what the hash code does.

That leads to confusion, and bugs. For example, the method using update_mmu_cache()
is racy on SMP where another processor can see the new PTE and hash it in before
we have cleaned the cache, and then blow trying to execute. This is hard to hit but
I think it has bitten us in the past.

Also, it's inefficient for embedded where we always end up having to do at least
one more page fault.

This reworks the whole thing by moving the cache sync into two main call sites,
though we keep different behaviours depending on the HW capability. The call
sites are set_pte_at() which is now made out of line, and ptep_set_access_flags()
which joins the former in pgtable.c

The base idea for Embedded with per-page exec support, is that we now do the
flush at set_pte_at() time when coming from an exec fault, which allows us
to avoid the double fault problem completely (we can even improve the situation
more by implementing TLB preload in update_mmu_cache() but that's for later).

If for some reason we didn't do it there and we try to execute, we'll hit
the page fault, which will do a minor fault, which will hit ptep_set_access_flags()
to do things like update _PAGE_ACCESSED or _PAGE_DIRTY if needed, we just make
this guys also perform the I/D cache sync for exec faults now. This second path
is the catch all for things that weren't cleaned at set_pte_at() time.

For cpus without per-pag exec support, we always do the sync at set_pte_at(),
thus guaranteeing that when the PTE is visible to other processors, the cache
is clean.

For the 64-bit hash with per-page exec support case, we keep the old mechanism
for now. I'll look into changing it later, once I've reworked a bit how we
use _PAGE_EXEC.

This is also a first step for adding _PAGE_EXEC support for embedded platforms

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 16:00:10 +11:00
Gerhard Pircher
4b7ad35936 powerpc/amigaone: Default config for AmigaOne boards
CONFIG_CC_OPTIMIZE_FOR_SIZE is selected, because otherwise the kernel
wouldn't boot. The AmigaOne's U-boot firmware seems to have a problem
loading uImages bigger than 1.8 MB.

Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 16:00:10 +11:00
Gerhard Pircher
8f23735d8f powerpc/amigaone: Bootwrapper and serial console support for AmigaOne
This adds the bootwrapper for the cuImage target and a compatible property
check for "pnpPNP,501" to the generic serial console support code.
The default link address for the cuImage target is set to 0x800000. This
allows to boot the kernel with AmigaOS4's second level bootloader, which
always loads a uImage at 0x500000.

Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 16:00:09 +11:00
Gerhard Pircher
50408b7def powerpc/amigaone: Generic device tree for all AmigaOne boards
This device tree does not provide the correct CPU name, as various CPU
models and revisions are used in AmigaOnes. Also the PCI root node does
not contain a interrupt mapping property, as all boards have different
interrupt routing. However the kernel can do a 1:1 mapping of all PCI
interrupts, as only i8259 legacy interrupts are used.

Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 16:00:09 +11:00
Gerhard Pircher
54b318aa52 powerpc/amigaone: Add platform support for AmigaOne
This commit adds the setup code for booting Linux on AmigaOne G3SE (G3
only), AmigaOne XE and uA1 (G3/G4) desktop computers. These boards were
sold by Eyetech and are based on MAI Logic's Teron boards and its
Articia S northbridge.
The AmigaOne uses U-boot as firmware, which doesn't support a flattened
device tree yet. The northbridge has some design flaws, which makes it
necessary to use non cacheable memory for DMA operations
(CONFIG_NOT_COHERENT_CACHE) and to avoid setting the coherence (M) flag
for memory pages.

Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 16:00:08 +11:00
Mike Mason
8535ef05a6 powerpc/eeh: Only disable/enable LSI interrupts in EEH
The EEH code disables and enables interrupts during the
device recovery process.  This is unnecessary for MSI
and MSI-X interrupts because they are effectively disabled
by the DMA Stopped state when an EEH error occurs.  The
current code is also incorrect for MSI-X interrupts.  It
doesn't take into account that MSI-X interrupts are tracked
in a different way than LSI/MSI interrupts.  This patch
ensures only LSI interrupts are disabled/enabled.

Signed-off-by: Mike Mason <mmlnx@us.ibm.com>
Acked-by: Linas Vepstas <linasvepstas@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 16:00:08 +11:00
Gabriel Paubert
10156ceac2 powerpc: Disable mv643xx Ethernet port 0 on Pegasos
After the last changes, the mv643xx_eth driver now detects
a spurious interface on port 0. Since only port 1 is actually
connected to a PHY, remove its description.

Signed-off-by: Gabriel Paubert <paubert@iram.es>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 16:00:08 +11:00
Anton Blanchard
91b0f5ec53 powerpc/mm: Move 64-bit unmapped_area to top of address space
We currently place mmaps just below the stack on 32bit, but leave them
in the middle of the address space on 64bit:

00100000-00120000 r-xp 00100000 00:00 0                    [vdso]
10000000-10010000 r-xp 00000000 08:06 179534               /tmp/sleep
10010000-10020000 rw-p 00000000 08:06 179534               /tmp/sleep
10020000-10130000 rw-p 10020000 00:00 0                    [heap]
40000000000-40000030000 r-xp 00000000 08:06 440743         /lib64/ld-2.9.so
40000030000-40000040000 rw-p 00020000 08:06 440743         /lib64/ld-2.9.so
40000050000-400001f0000 r-xp 00000000 08:06 440671         /lib64/libc-2.9.so
400001f0000-40000200000 r--p 00190000 08:06 440671         /lib64/libc-2.9.so
40000200000-40000220000 rw-p 001a0000 08:06 440671         /lib64/libc-2.9.so
40000220000-40008230000 rw-p 40000220000 00:00 0
fffffbc0000-fffffd10000 rw-p fffffeb0000 00:00 0           [stack]

Right now it isn't an issue, but at some stage we will run into mmap or
hugetlb allocation issues. Using the same layout as 32bit gives us a
some breathing room. This matches what x86-64 is doing too.

00100000-00103000 r-xp 00100000 00:00 0                    [vdso]
10000000-10001000 r-xp 00000000 08:06 554894               /tmp/test
10010000-10011000 r--p 00000000 08:06 554894               /tmp/test
10011000-10012000 rw-p 00001000 08:06 554894               /tmp/test
10012000-10113000 rw-p 10012000 00:00 0                    [heap]
fffefdf7000-ffff7df8000 rw-p fffefdf7000 00:00 0
ffff7df8000-ffff7f97000 r-xp 00000000 08:06 130591         /lib64/libc-2.9.so
ffff7f97000-ffff7fa6000 ---p 0019f000 08:06 130591         /lib64/libc-2.9.so
ffff7fa6000-ffff7faa000 r--p 0019e000 08:06 130591         /lib64/libc-2.9.so
ffff7faa000-ffff7fc0000 rw-p 001a2000 08:06 130591         /lib64/libc-2.9.so
ffff7fc0000-ffff7fc4000 rw-p ffff7fc0000 00:00 0
ffff7fc4000-ffff7fec000 r-xp 00000000 08:06 130663         /lib64/ld-2.9.so
ffff7fee000-ffff7ff0000 rw-p ffff7fee000 00:00 0
ffff7ffa000-ffff7ffb000 rw-p ffff7ffa000 00:00 0
ffff7ffb000-ffff7ffc000 r--p 00027000 08:06 130663         /lib64/ld-2.9.so
ffff7ffc000-ffff7fff000 rw-p 00028000 08:06 130663         /lib64/ld-2.9.so
ffff7fff000-ffff8000000 rw-p ffff7fff000 00:00 0
fffffc59000-fffffc6e000 rw-p ffffffeb000 00:00 0           [stack]

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 16:00:07 +11:00
Milton Miller
c3bd517de6 powerpc/pci: Move hose_list and pci_address_to_pio to pci-common
move the definition of hose_list next to its hotplug spinlock.

create pcibios_io_size to encapsulate ifdef in existing pci-common
function pcibios_vaddr_is_ioport

move pci_address_to_pio to pci-common, using new pcibios_io_size, and
protect this GPL exported function against concurrent hotplug removal

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 16:00:07 +11:00
Paul Mackerras
0475f9ea8e perf_counters: allow users to count user, kernel and/or hypervisor events
Impact: new perf_counter feature

This extends the perf_counter_hw_event struct with bits that specify
that events in user, kernel and/or hypervisor mode should not be
counted (i.e. should be excluded), and adds code to program the PMU
mode selection bits accordingly on x86 and powerpc.

For software counters, we don't currently have the infrastructure to
distinguish which mode an event occurs in, so we currently fail the
counter initialization if the setting of the hw_event.exclude_* bits
would require us to distinguish.  Context switches and CPU migrations
are currently considered to occur in kernel mode.

On x86, this changes the previous policy that only root can count
kernel events.  Now non-root users can count kernel events or exclude
them.  Non-root users still can't use NMI events, though.  On x86 we
don't appear to have any way to control whether hypervisor events are
counted or not, so hw_event.exclude_hv is ignored.

On powerpc, the selection of whether to count events in user, kernel
and/or hypervisor mode is PMU-wide, not per-counter, so this adds a
check that the hw_event.exclude_* settings are the same as other events
on the PMU.  Counters being added to a group have to have the same
settings as the other hardware counters in the group.  Counters and
groups can only be enabled in hw_perf_group_sched_in or power_perf_enable
if they have the same settings as any other counters already on the
PMU.  If we are not running on a hypervisor, the exclude_hv setting
is ignored (by forcing it to 0) since we can't ever get any
hypervisor events.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-02-11 15:06:59 +11:00
Michael Ellerman
6071ed0487 powerpc/pseries: Return the number of MSIs we could allocate
If we can't allocate the requested number of MSIs, we can still tell the
generic code how many we were able to allocate. That can then be passed
onto the driver, allowing it to request that many in future, and
probably succeeed.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 13:38:02 +11:00
Michael Ellerman
649781f827 powerpc/pseries: Check for MSI-X also in rtas_msi_pci_irq_fixup()
We also need to check that the device isn't using MSI-X in the irq fixup
routine, otherwise we might leave MSI-Xs configured at boot.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 13:38:01 +11:00
Michael Ellerman
3a51c0cbea powerpc/pseries: Add support for ibm,req#msi-x
Firmware encodes the number of MSI-X requested by a device in a

different property than for MSI. Pull the property name out as a
parameter and share the logic for both cases.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 13:38:01 +11:00
Michael Ellerman
e27ed698b8 powerpc/pseries: Fix MSI-X interrupt querying
We need to increment i in the loop that queries what interrupts firmware
gave us, otherwise we'll incorrectly use the first value over and over.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 13:38:01 +11:00
Michael Ellerman
059f134f84 powerpc: Allow debugging of LMBs with lmb=debug
The lmb debugging can be turned on at boottime with lmb=debug on the
command line. However on powerpc that doesn't work, because we don't
necessarily call lmb_dump_all().

So always call lmb_dump_all() after lmb_analyze(), no output is
generated unless lmb=debug is found on the command line.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 13:38:00 +11:00
Michael Ellerman
33642d31d1 powerpc: Remove unused ppc64_terminate_msg()
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 13:38:00 +11:00
Milton Miller
7ce14a315d powerpc/pseries: Remove write only variable in PCI DLPAR
Since we never hotplug add an isa bus, we never need to set primary.
Delete this write-only variable.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 13:37:59 +11:00
Milton Miller
8b16cd238d powerpc/numa: Remove redundant find_cpu_node()
Use of_get_cpu_node, which is a superset of numa.c's find_cpu_node in
a less restrictive section (text vs cpuinit).

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 13:37:59 +11:00
Milton Miller
20fcefe5a0 powerpc/numa: Avoid possible reference beyond prop. length in find_min_common_depth()
find_min_common_depth() was checking the property length incorrectly.
The value is in bytes not cells, and it is using the second entry.

Signed-off-By: Milton Miller <miltonm@bga.com>

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-11 13:37:58 +11:00
Benjamin Herrenschmidt
6a4d7a90fc Merge commit 'gcl/next' into next 2009-02-11 13:37:49 +11:00
Benjamin Herrenschmidt
edbc29d76d Merge commit 'kumar/next' into next 2009-02-11 13:37:44 +11:00
Michael Neuling
0b2f82872f powerpc: Add missing sparsemem.h include
arch/powerpc/platforms/pseries/hotplug-memory.c uses
remove_section_mapping() but doesn't include sparsemem.h which defines
it.  This can cause compilation fails for some configs.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-10 14:39:09 +11:00
Benjamin Herrenschmidt
5b11abfdb5 powerpc/pci: mmap anonymous memory when legacy_mem doesn't exist
The new legacy_mem file in sysfs is causing problems with X on machines
that don't support legacy memory access. The way I initially implemented
it, we would fail with -ENXIO when trying to mmap it, thus exposing to
X that we do support the API but there is no legacy memory.

Unfortunately, X poor error handling is causing it to fail to start when
it gets this error.

This implements a workaround hack that instead maps anonymous memory
instead (using shmem if VM_SHARED is set, just like /dev/zero does).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-10 14:39:08 +11:00
Michael Neuling
d87bf76679 powerpc/cell: Add missing #include for oprofile
arch/powerpc/oprofile/cell/spu_profiler.c is missing a asm/time.h
include which is required for ppc_proc_freq.  This can cause compile
failures for some config combinations.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-10 14:39:08 +11:00
Steven Rostedt
f25f9074c2 powerpc/ftrace: Fix math to calculate offset in TOC
Impact: fix dynamic ftrace with large modules in PPC64

The math to calculate the offset into the TOC that is taken from reading
the trampoline is incorrect. The bottom half of the offset is a signed
extended short. The current code was using an OR to create the offset
when it should have been using an addition.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-10 14:39:08 +11:00
Ananth N Mavinakayanahalli
eef336189b powerpc: Don't emulate mr. instructions
Currently emulate_step() emulates mr. instructions without updating cr0
and this can be disastrous. Don't emulate mr.

This bug has been around for a while, but I am not sure if its a worthy
-stable candidate. I'll leave it to Ben do decide.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-10 14:39:07 +11:00
Kumar Gala
6c24b17453 powerpc/fsl-booke: Fix mapping functions to use phys_addr_t
Fixed v_mapped_by_tlbcam() and p_mapped_by_tlbcam() to use phys_addr_t
instead of unsigned long.  In 36-bit physical mode we really need these
functions to deal with phys_addr_t when trying to match a physical
address or when returning one.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-09 21:11:55 -06:00
Anton Vorontsov
a0e8618c71 powerpc/83xx: Add FSL eSDHC support for MPC837x-RDB boards
Simply add appropriate sdhci nodes.

Note that U-Boot should configure pin multiplexing for eSDHC prior
to Linux could use it. U-Boot should also fill-in the clock-frequency
property (eSDHC clock depends on board-specific SCCR[ESDHCCM] bits).

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-06 10:49:08 -06:00
Anton Vorontsov
766d282672 powerpc/83xx: Convert existing sdhc nodes to new bindings
- sdhc node renamed to sdhci ("sdhc" name is confusing since SDHC is
  used to name Secure Digital High Capacity cards, while SDHCI is an
  interface).

- Get rid of "fsl,esdhc" compatible entry, it's replaced by the
  "fsl,<chip>-esdhc" scheme;

- Get rid of `model' property.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-06 10:48:58 -06:00
Julia Lawall
08c6e3a578 arch/powerpc: Eliminate double sizeof
Taking sizeof the result of sizeof is quite strange and does not seem to be
what is wanted here.

This was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
expression E;
@@

- sizeof (
  sizeof (E)
- )

@@
type T;
@@

- sizeof (
  sizeof (T)
- )
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-06 10:44:28 -06:00
paulfax
7f3ea17f31 powerpc/cpm2: Fix set interrupt type
This is a simple change to correct problems when using set_irq_type
on platforms using CPM2.  This code corrects the problem on most platform
but may have issues on 8272 derived platforms for some interrupts.

On 8272 PC2 & 3 are missing and PC 23 & 29 are added, which this patch
does not address.

Signed-off-by: Paul Bilke <paul@conspiracy.net>
Reviewed-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-06 10:44:02 -06:00
Anton Vorontsov
e85477f516 powerpc/83xx: Fix TSEC0 workability on MPC8313E-RDB boards
TSEC0 is connected to Vitesse 7385 5-port switch. The switch
isn't connected to any mdio bus, the link to the switch is fixed
to Full-duplex 1000 Mb/s (no pause).

This patch fixes following failure during bootup:

mdio@24520:01 not found
eth0: Could not attach to PHY
IP-Config: Failed to open eth0

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-06 10:38:57 -06:00
Anton Vorontsov
1f0d4d16d9 powerpc/83xx: Fix missing #{address,size}-cells in mpc8313erdb.dts
commit b31a1d8b41 ("gianfar: Convert
gianfar to an of_platform_driver") introduced a child node for
the ethernet@25000 controller, but no address and size cells
specifiers were added, and that makes dtc unhappy:

DTC: dts->dtb  on file "arch/powerpc/boot/dts/mpc8313erdb.dts"
Warning (reg_format): "reg" property in /soc8313@e0000000/ethernet@25000/mdio@25520 has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc8313@e0000000/ethernet@25000/mdio@25520
Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc8313@e0000000/ethernet@25000/mdio@25520

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-06 10:38:54 -06:00
Michael Neuling
e2a02ba667 powerpc/83xx: Build breakage for CONFIG_PM but no CONFIG_SUSPEND
I noticed this doing some randconfig testing (.config below).  I have
CONFIG_PM but no CONFIG_SUSPEND.  Bug is against mainline.

arch/powerpc/sysdev/built-in.o: In function `ipic_suspend':
ipic.c:(.text+0x6b34): undefined reference to `fsl_deep_sleep'
make[1]: *** [.tmp_vmlinux1] Error 1
make: *** [sub-make] Error 2

Looks like #ifdef CONFIG_PM in arch/powerpc/sysdev/ipic.c should be
CONFIG_SUSPEND.  d49747bdfb introduced
this.

Fix build when we have CONFIG_PM but no CONFIG_SUSPEND.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-02-06 10:36:44 -06:00
Ingo Molnar
9d45cf9e36 Merge branch 'x86/urgent' into x86/apic
Conflicts:
	arch/x86/mach-default/setup.c

Semantic merge:
	arch/x86/kernel/irqinit_32.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05 22:30:01 +01:00
Grzegorz Bernacki
bdad05489f powerpc/5200: Add support for the digsy MTC board.
Board support for the InterControl Digsy-MTC device based on the MPC5200B SoC.

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-02-04 13:39:17 -07:00
Grant Likely
bfee95bb83 powerpc/5200: Add support for the Media5200 board from Freescale
This patch adds board support for the Media5200 platform.  Changes are:
- add the media5200 device tree
- add the media5200 platform support code and cascaded interrupt controller
- add media5200 to the build targets.

Note: this patch also includes a minor tweak to the lite5200(b) target
images list to add the .dtb files to the image list.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-02-04 13:39:17 -07:00