based on Eric's patch ...
together mold it with dyn_array for irq_desc, will allcate kstat_irqs for
nr_irq_desc alltogether if needed. -- at that point nr_cpus is known already.
v2: make sure system without generic_hardirqs works they don't have irq_desc
v3: fix merging
v4: [mingo@elte.hu] fix typo
[ mingo@elte.hu ] irq: build fix
fix:
arch/x86/xen/spinlock.c: In function 'xen_spin_lock_slow':
arch/x86/xen/spinlock.c:90: error: 'struct kernel_stat' has no member named 'irqs'
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
KVM intends to use paravirt code to calibrate khz. Xen
current code will do just fine. So as a first step, factor out
code to pvclock.c.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
When reserving space for the hypervisor the Xen paravirt backend adds
an extra two pages (this was carried forward from the 2.6.18-xen tree
which had them "for safety"). Depending on various CONFIG options this
can cause the boot time fixmaps to span multiple PMDs which is not
supported and triggers a WARN in early_ioremap_init().
This was exposed by 2216d199b1 which
moved the dmi table parsing earlier.
x86: fix CONFIG_X86_RESERVE_LOW_64K=y
The bad_bios_dmi_table() quirk never triggered because we do DMI setup
too late. Move it a bit earlier.
There is no real reason to reserve these two extra pages and the
fixmap already incorporates FIX_HOLE which serves the same
purpose. None of the other callers of reserve_top_address do this.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When pinning/unpinning a pagetable with split pte locks, we can end up
holding multiple pte locks at once (we need to hold the locks while
there's a pending batched hypercall affecting the pte page). Because
all the pte locks are in the same lock class, lockdep thinks that
we're potentially taking a lock recursively.
This warning is spurious because we always take the pte locks while
holding mm->page_table_lock. lockdep now has spin_lock_nest_lock to
express this kind of dominant lock use, so use it here so that lockdep
knows what's going on.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There are a couple of Xen features which rely on directly accessing
per-cpu data via a segment register, which is not yet available on
x86-64. In the meantime, just disable direct access to the vcpu info
structure; this leaves some of the code as dead, but it will come to
life in time, and the warnings are suppressed.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Xen options need to depend on XEN.
Also, add newline at end of file.
Without this patch you need to disable CONFIG_PM in order to
disable CPU hotplugging.
Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Acked-by Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
PFN_PHYS() can truncate large addresses unless its passed a suitable
large type. This is fixed more generally in the patch series
introducing phys_addr_t, but we need a short-term fix to solve a
Xen regression reported by Roberto De Ioris.
Reported-by: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We only pin PTE pages when using split PTE locks, so don't do the
pin/unpin when attaching/detaching pte pages to a pinned pagetable.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Define USE_SPLIT_PTLOCKS as a constant expression rather than repeating
"NR_CPUS >= CONFIG_SPLIT_PTLOCK_CPUS" all over the place.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There's no need for these functions to be accessed from outside of xen/smp.c
Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Using native_pte_val triggers the BUG_ON() in the paravirt_ops
version of pte_flags().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Note the changes from 2.6.18-xen CPU hotplugging:
A vcpu_down request from the remote admin via Xenbus both hotunplugs the
CPU, and disables it by removing it from the cpu_present map, and removing
its entry in /sys.
A vcpu_up request from the remote admin only re-enables the CPU, and does
not immediately bring the CPU up. A udev event is emitted, which can be
caught by the user if he wishes to automatically re-up CPUs when available,
or implement a more complex policy.
Signed-off-by: Alex Nixon <alex.nixon@citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar wrote:
> -tip testing found this build failure:
>
> arch/x86/xen/spinlock.c: In function ‘spin_time_start’:
> arch/x86/xen/spinlock.c:60: error: implicit declaration of function ‘xen_clocksource_read’
>
> i've excluded these new commits for now from tip/master - could you
> please send a delta fix against tip/x86/xen?
Make xen_clocksource_read non-static.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch changes the pfn args from 'u32' to 'unsigned long'
on alloc_p*() functions on paravirt_ops, and the corresponding
implementations for Xen and VMI. The prototypes for CONFIG_PARAVIRT=n
are already using unsigned long, so paravirt.h now matches the prototypes
on asm-x86/pgalloc.h.
It shouldn't result in any changes on generated code on 32-bit, with
or without CONFIG_PARAVIRT. On both cases, 'codiff -f' didn't show any
change after applying this patch.
On 64-bit, there are (expected) binary changes only when CONFIG_PARAVIRT
is enabled, as the patch is really supposed to change the size of the
pfn args.
[ v2: KVM_GUEST: use the right parameter type on kvm_release_pt() ]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Acked-by: Zachary Amsden <zach@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Measure how long spinlocks spend blocked. Also rename some fields to
be more consistent.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If spin_lock is called in an interrupts-enabled context, we can safely
enable interrupts while spinning. We don't bother for the actual spin
loop, but if we timeout and fall back to blocking, it's definitely
worthwhile enabling interrupts if possible.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add support for exporting statistics on mmu updates, multicall
batching and pv spinlocks into debugfs. The base path is xen/ and
each subsystem adds its own directory: mmu, multicalls, spinlocks.
In each directory, writing 1 to "zero_stats" will cause the
corresponding stats to be zeroed the next time they're updated.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A spinlock can be interrupted while spinning, so make sure we preserve
the previous lock of interest if we're taking a lock from within an
interrupt handler.
We also need to deal with the case where the blocking path gets
interrupted between testing to see if the lock is free and actually
blocking. If we get interrupted there and end up in the state where
the lock is free but the irq isn't pending, then we'll block
indefinitely in the hypervisor. This fix is to make sure that any
nested lock-takers will always leave the irq pending if there's any
chance the outer lock became free.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It's easier to pattern match on Xen function if they all start with xen_.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add some comments explaining the locking and pinning algorithm when
using split pte locks. Also implement a minor optimisation of not
pinning the PTE when not using split pte locks.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Xen-devel <xen-devel@lists.xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There are four operating modes Xen code may find itself running in:
- native
- hvm domain
- pv dom0
- pv domU
Clean up predicates for testing for these states to make them more consistent.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Xen-devel <xen-devel@lists.xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently paravirt_ops alloc_p*() uses u32 for the pfn args. We should
change that later, but while the pfn parameter is still u32, we need to
cast the PFN_PHYS() argument at xen_alloc_ptpage() to unsigned long,
otherwise it will lose bits on the shift.
I think PFN_PHYS() should behave better when fed with smaller integers,
but a cast to unsigned long won't be enough for all cases on 32-bit PAE,
and a cast to u64 would be overkill for most users of PFN_PHYS().
We could have two different flavors of PFN_PHYS: one for low pages
only (unsigned long) and another that works for any page (u64)),
but while we don't have it, we will need the cast to unsigned long on
xen_alloc_ptpage().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add a proper comment for set_aliased_prot() and fix an
unsigned long/void * warning.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For some reason I managed to miss a bunch of irq-related functions
which also need to be compiled without -pg when using ftrace. This
patch moves them into their own file, and starts a cleanup process
I've been meaning to do anyway.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: "Alex Nixon (Intern)" <Alex.Nixon@eu.citrix.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In general, Xen doesn't support wrmsr from an unprivileged domain; it
just ends up ignoring the instruction and printing a message on the
console.
Given that there are sets of MSRs we know the kernel will try to write
to, but we don't care, just eat them in xen_write_msr to cut down on
console noise.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When the ldt gets to more than 1 page in size, the kernel uses vmalloc
to allocate it. This means that:
- when making the ldt RO, we must update the pages in both the vmalloc
mapping and the linear mapping to make sure there are no RW aliases.
- we need to use arbitrary_virt_to_machine to compute the machine addr
for each update
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Using native_pte_val triggers the BUG_ON() in the paravirt_ops
version of pte_flags().
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
ftrace requires certain low-level code, like spinlocks and timestamps,
to be compiled without -pg in order to avoid infinite recursion. This
patch splits out the core paravirt spinlocks and the Xen spinlocks
into separate files which can be compiled without -pg.
Also do xen/time.c while we're about it. As a result, we can now use
ftrace within a Xen domain.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
LTP testing showed that Xen does not properly implement
sys_modify_ldt(). This patch does the final little bits needed to
make the ldt work properly.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When implementing sysexit32, don't let Xen use sysret to return to
userspace. That results in usermode register state being trashed.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits)
NR_CPUS: Replace NR_CPUS in speedstep-centrino.c
cpumask: Provide a generic set of CPUMASK_ALLOC macros, FIXUP
NR_CPUS: Replace NR_CPUS in cpufreq userspace routines
NR_CPUS: Replace per_cpu(..., smp_processor_id()) with __get_cpu_var
NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genapic_flat_64.c
NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genx2apic_uv_x.c
NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/proc.c
NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/mcheck/mce_64.c
cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c, fix
cpumask: Use optimized CPUMASK_ALLOC macros in the centrino_target
cpumask: Provide a generic set of CPUMASK_ALLOC macros
cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c
cpumask: Optimize cpumask_of_cpu in kernel/time/tick-common.c
cpumask: Optimize cpumask_of_cpu in drivers/misc/sgi-xp/xpc_main.c
cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/ldt.c
cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/io_apic_64.c
cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr
Revert "cpumask: introduce new APIs"
cpumask: make for_each_cpu_mask a bit smaller
net: Pass reference to cpumask variable in net/sunrpc/svc.c
...
Fix up trivial conflicts in drivers/cpufreq/cpufreq.c manually
PTE_PFN_MASK was getting lonely, so I made it a friend.
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rusty, in his peevish way, complained that macros defining constants
should have a name which somewhat accurately reflects the actual
purpose of the constant.
Aside from the fact that PTE_MASK gives no clue as to what's actually
being masked, and is misleadingly similar to the functionally entirely
different PMD_MASK, PUD_MASK and PGD_MASK, I don't really see what the
problem is.
But if this patch silences the incessent noise, then it will have
achieved its goal (TODO: write test-case).
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix:
arch/x86/xen/enlighten.c:615: error: variable ‘xen_basic_apic_ops’ has initializer but incomplete type
arch/x86/xen/enlighten.c:616: error: unknown field ‘read’ specified in initializer
[...]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Various versions of the hypervisor have differences in what ABIs and
features they support. Print some details into the boot log to help
with remote debugging.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use alternatives to select the workaround for the 11AP Pentium erratum
for the affected steppings on the fly rather than build time. Remove the
X86_GOOD_APIC configuration option and replace all the calls to
apic_write_around() with plain apic_write(), protecting accesses to the
ESR as appropriate due to the 3AP Pentium erratum. Remove
apic_read_around() and all its invocations altogether as not needed.
Remove apic_write_atomic() and all its implementing backends. The use of
ASM_OUTPUT2() is not strictly needed for input constraints, but I have
used it for readability's sake.
I had the feeling no one else was brave enough to do it, so I went ahead
and here it is. Verified by checking the generated assembly and tested
with both a 32-bit and a 64-bit configuration, also with the 11AP
"feature" forced on and verified with gdb on /proc/kcore to work as
expected (as an 11AP machines are quite hard to get hands on these days).
Some script complained about the use of "volatile", but apic_write() needs
it for the same reason and is effectively a replacement for writel(), so I
have disregarded it.
I am not sure what the policy wrt defconfig files is, they are generated
and there is risk of a conflict resulting from an unrelated change, so I
have left changes to them out. The option will get removed from them at
the next run.
Some testing with machines other than mine will be needed to avoid some
stupid mistake, but despite its volume, the change is not really that
intrusive, so I am fairly confident that because it works for me, it will
everywhere.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Xen save/restore needs bits of code enabled by PM_SLEEP, and PM_SLEEP
depends on PM. So make XEN_SAVE_RESTORE depend on PM and PM_SLEEP
depend on XEN_SAVE_RESTORE.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The standard ticket spinlocks are very expensive in a virtual
environment, because their performance depends on Xen's scheduler
giving vcpus time in the order that they're supposed to take the
spinlock.
This implements a Xen-specific spinlock, which should be much more
efficient.
The fast-path is essentially the old Linux-x86 locks, using a single
lock byte. The locker decrements the byte; if the result is 0, then
they have the lock. If the lock is negative, then locker must spin
until the lock is positive again.
When there's contention, the locker spin for 2^16[*] iterations waiting
to get the lock. If it fails to get the lock in that time, it adds
itself to the contention count in the lock and blocks on a per-cpu
event channel.
When unlocking the spinlock, the locker looks to see if there's anyone
blocked waiting for the lock by checking for a non-zero waiter count.
If there's a waiter, it traverses the per-cpu "lock_spinners"
variable, which contains which lock each CPU is waiting on. It picks
one CPU waiting on the lock and sends it an event to wake it up.
This allows efficient fast-path spinlock operation, while allowing
spinning vcpus to give up their processor time while waiting for a
contended lock.
[*] 2^16 iterations is threshold at which 98% locks have been taken
according to Thomas Friebel's Xen Summit talk "Preventing Guests from
Spinning Around". Therefore, we'd expect the lock and unlock slow
paths will only be entered 2% of the time.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <clameter@linux-foundation.org>
Cc: Petr Tesarik <ptesarik@suse.cz>
Cc: Virtualization <virtualization@lists.linux-foundation.org>
Cc: Xen devel <xen-devel@lists.xensource.com>
Cc: Thomas Friebel <thomas.friebel@amd.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Switch to using the lock-byte spinlock implementation, to avoid the
worst of the performance hit from ticket locks.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <clameter@linux-foundation.org>
Cc: Petr Tesarik <ptesarik@suse.cz>
Cc: Virtualization <virtualization@lists.linux-foundation.org>
Cc: Xen devel <xen-devel@lists.xensource.com>
Cc: Thomas Friebel <thomas.friebel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Now that the vdso32 code can cope with both syscall and sysenter
missing for 32-bit compat processes, just disable the features without
disabling vdso altogether.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
AMD only supports "syscall" from 32-bit compat usermode.
Intel and Centaur(?) only support "sysenter" from 32-bit compat usermode.
Set the X86 feature bits accordingly, and set up the vdso in
accordance with those bits. On the offchance we run on in a 64-bit
environment which supports neither syscall nor sysenter from 32-bit
mode, then fall back to the int $0x80 vdso.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
fix:
arch/x86/xen/built-in.o: In function `xen_enable_syscall':
(.cpuinit.text+0xdb): undefined reference to `sysctl_vsyscall32'
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Old versions of Xen (3.1 and before) don't support sysenter or syscall
from 32-bit compat userspaces. If we can't set the appropriate
syscall callback, then disable the corresponding feature bit, which
will cause the vdso32 setup to fall back appropriately.
Linux assumes that syscall is always available to 32-bit userspace,
and installs it by default if sysenter isn't available. In that case,
we just disable vdso altogether, forcing userspace libc to fall back
to int $0x80.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix:
arch/x86/xen/enlighten.c: In function 'xen_set_fixmap':
arch/x86/xen/enlighten.c:1127: error: 'FIX_KMAP_BEGIN' undeclared (first use in this function)
arch/x86/xen/enlighten.c:1127: error: (Each undeclared identifier is reported only once
arch/x86/xen/enlighten.c:1127: error: for each function it appears in.)
arch/x86/xen/enlighten.c:1127: error: 'FIX_KMAP_END' undeclared (first use in this function)
make[1]: *** [arch/x86/xen/enlighten.o] Error 1
make: *** [arch/x86/xen/enlighten.o] Error 2
FIX_KMAP_BEGIN is only available on HIGHMEM.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Allow Xen to be enabled on 64-bit.
Also extend domain size limit from 8 GB (on 32-bit) to 32 GB on 64-bit.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
64-bit uses MSRs for important things like the base for fs and
gs-prefixed addresses. It's more efficient to use a hypercall to
update these, rather than go via the trap and emulate path.
Other MSR writes are just passed through; in an unprivileged domain
they do nothing, but it might be useful later.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
64-bit userspace expects the vdso to be mapped at a specific fixed
address, which happens to be in the middle of the kernel address
space. Because we have split user and kernel pagetables, we need to
make special arrangements for the vsyscall mapping to appear in the
kernel part of the user pagetable.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We set up entrypoints for syscall and sysenter. sysenter is only used
for 32-bit compat processes, whereas syscall can be used in by both 32
and 64-bit processes.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Because the x86_64 architecture does not enforce segment limits, Xen
cannot protect itself with them as it does in 32-bit mode. Therefore,
to protect itself, it runs the guest kernel in ring 3. Since it also
runs the guest userspace in ring3, the guest kernel must maintain a
second pagetable for its userspace, which does not map kernel space.
Naturally, the guest kernel pagetables map both kernel and userspace.
The userspace pagetable is attached to the corresponding kernel
pagetable via the pgd's page->private field. It is allocated and
freed at the same time as the kernel pgd via the
paravirt_pgd_alloc/free hooks.
Fortunately, the user pagetable is almost entirely shared with the
kernel pagetable; the only difference is the pgd page itself. set_pgd
will populate all entries in the kernel pagetable, and also set the
corresponding user pgd entry if the address is less than
STACK_TOP_MAX.
The user pagetable must be pinned and unpinned with the kernel one,
but because the pagetables are aliased, pgd_walk() only needs to be
called on the kernel pagetable. The user pgd page is then
pinned/unpinned along with the kernel pgd page.
xen_write_cr3 must write both the kernel and user cr3s.
The init_mm.pgd pagetable never has a user pagetable allocated for it,
because it can never be used while running usermode.
One awkward area is that early in boot the page structures are not
available. No user pagetable can exist at that point, but it
complicates the logic to avoid looking at the page structure.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need to do this, otherwise we can get a GPF on hypercall return
after TLS descriptor is cleared but %fs is still pointing to it.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Point the boot params cmd_line_ptr to the domain-builder-provided
command line.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rewrite pgd_walk to deal with 64-bit address spaces. There are two
notible features of 64-bit workspaces:
1. The physical address is only 48 bits wide, with the upper 16 bits
being sign extension; kernel addresses are negative, and userspace is
positive.
2. The Xen hypervisor mapping is at the negative-most address, just above
the sign-extension hole.
1. means that we can't easily use addresses when traversing the space,
since we must deal with sign extension. This rewrite expresses
everything in terms of pgd/pud/pmd indices, which means we don't need
to worry about the exact configuration of the virtual memory space.
This approach works equally well in 32-bit.
To deal with 2, assume the hole is between the uppermost userspace
address and PAGE_OFFSET. For 64-bit this skips the Xen mapping hole.
For 32-bit, the hole is zero-sized.
In all cases, the uppermost kernel address is FIXADDR_TOP.
A side-effect of this patch is that the upper boundary is actually
handled properly, exposing a long-standing bug in 32-bit, which failed
to pin kernel pmd page. The kernel pmd is not shared, and so must be
explicitly pinned, even though the kernel ptes are shared and don't
need pinning.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The x86_64 interrupt subsystem is oriented towards vectors, as opposed
to a flat irq space as it is in x86-32. This patch adds a simple
identity irq->vector mapping so that we can continue to feed irqs into
do_IRQ() and get a good result.
Ideally x86_32 will unify with the 64-bit code and use vectors too.
At that point we can move to mapping event channels to vectors, which
will allow us to economise on irqs (so per-cpu event channels can
share irqs, rather than having to allocte one per cpu, for example).
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use callback_op hypercall to register callbacks in a 32/64-bit
independent way (64-bit doesn't need a code segment, but that detail
is hidden in XEN_CALLBACK).
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
swapgs is a no-op under Xen, because the hypervisor makes sure the
right version of %gs is current when switching between user and kernel
modes. This means that the swapgs "implementation" can be inlined and
used when the stack is unsafe (usermode). Unfortunately, it means
that disabling patching will result in a non-booting kernel...
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Xen pushes two extra words containing the values of rcx and r11. This
pvop hook copies the words back into their appropriate registers, and
cleans them off the stack. This leaves the stack in native form, so
the normal handler can run unchanged.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Make Xen's set_pte_mfn() use set_pte_vaddr rather than copying it.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need to wait until the page structure is available to use the
proper pagetable page alloc/release operations, since they use struct
page to determine if a pagetable is pinned.
This happened to work in 32bit because nobody allocated new pagetable
pages in the interim between xen_pagetable_setup_done and
xen_post_allocator_init, but the 64-bit kenrel needs to allocate more
pagetable levels.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Someone's got to do it.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When building initial pagetables in 64-bit kernel the pud/pmd pointer may
be in ioremap/fixmap space, so we need to walk the pagetable to look up the
physical address.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
arbitrary_virt_to_machine can truncate a machine address if its above
4G. Cast the problem away.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rearrange the pagetable initialization to share code with the 64-bit
kernel. Rather than deferring anything to pagetable_setup_start, just
set up an initial pagetable in swapper_pg_dir early at startup, and
create an additional 8MB of physical memory mappings. This matches
the native head_32.S mappings to a large degree, and allows the rest
of the pagetable setup to continue without much Xen vs. native
difference.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Early in boot, map a chunk of extra physical memory for use later on.
We need a pool of mapped pages to allocate further pages to construct
pagetables mapping all physical memory.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It also doesn't need the 32-bit hack version of set_pte for initial
pagetable construction, so just make it use the real thing.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Set up the initial pagetables to map the kernel mapping into the
physical mapping space. This makes __va() usable, since it requires
physical mappings.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Split xen-asm into 32- and 64-bit files, and implement the 64-bit
variants.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add the Xen entrypoint and ELF notes to head_64.S. Adapts xen-head.S
to compile either 32-bit or 64-bit.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
A number of random changes to make xen/smp.c compile in 64-bit mode.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>a
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
As a stopgap until Mike Travis's x86-64 gs-based percpu patches are
ready, provide workaround functions for x86_read/write_percpu for
Xen's use.
Specifically, this means that we can't really make use of vcpu
placement, because we can't use a single gs-based memory access to get
to vcpu fields. So disable all that for now.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move all the smp_ops setup into smp.c, allowing a lot of things to
become static.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
x86_64 stores the active_mm in the pda, so fetch it from there.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need extra pv_mmu_ops for 64-bit, to deal with the extra level of
pagetable.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Copy 64-bit definitions of various interface structures into place.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need set_pte to work from a relatively early point, so enable it
from the start.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
add xen_timer_resume() hook.
Timer resume should be done after event channel is resumed.
add xen_arch_resume() hook when ipi becomes usable after resume.
After resume, some cpu specific resource must be reinitialized
on ia64 that can't be set by another cpu.
However available hooks is run once on only one cpu so that ipi has
to be used.
During stop_machine_run() ipi can't be used because interrupt is masked.
So add another hook after stop_machine_run().
Another approach might be use resume hook which is run by
device_resume(). However device_resume() may be executed on
suspend error recovery path.
So it is necessary to determine whether it is executed on real resume path
or error recovery path.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Print a backtrace if a multicall fails, to help with debugging.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Update arch/x86's use of page-aligned variables. The change to
arch/x86/xen/mmu.c fixes an actual bug, but the rest are cleanups
and to set a precedent.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Call paravirt_pagetable_setup_{start,done}
These paravirt_ops functions were not being called on x86_64.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fix for pv - clean up the namespace there too.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Define the Xen specific basic apic ops, in additon to paravirt apic ops,
with some misc warning fixes.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: akpm@linux-foundation.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rename the paravirtualized calculate_cpu_khz to calibrate_tsc.
In all cases, we actually calibrate_tsc and use that as the cpu_khz value.
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Dan Hecht <dhecht@vmware.com>
Cc: Dan Hecht <dhecht@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
64-bit Xen pushes a couple of extra words onto an exception frame.
Add a hook to deal with them.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Don't conflate sysret and sysexit; they're different instructions with
different semantics, and may be in use at the same time (at least
within the same kernel, depending on whether its an Intel or AMD
system).
sysexit - just return to userspace, does no register restoration of
any kind; must explicitly atomically enable interrupts.
sysret - reloads flags from r11, so no need to explicitly enable
interrupts on 64-bit, responsible for restoring usermode %gs
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citirx.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add hooks which are called at pgd_alloc/free time. The pgd_alloc hook
may return an error code, which if non-zero, causes the pgd allocation
to be failed. The hooks may be used to allocate/free auxillary
per-pgd information.
also fix:
> * Ingo Molnar <mingo@elte.hu> wrote:
>
> include/asm/pgalloc.h: In function ‘paravirt_pgd_free':
> include/asm/pgalloc.h:14: error: parameter name omitted
> arch/x86/kernel/entry_64.S: In file included from
> arch/x86/kernel/traps_64.c:51:include/asm/pgalloc.h: In function ‘paravirt_pgd_free':
> include/asm/pgalloc.h:14: error: parameter name omitted
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[ TODO: release the underlying memory back to Xen. ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: the arch/x86 maintainers <x86@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
rename update_memory_range to e820_update_range
rename add_memory_region to e820_add_region
to make it more clear that they are about e820 map operations.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When converting the page number in a pte/pmd/pud/pgd between
machine and pseudo-physical addresses, the converted result was
being truncated at 32-bits. This caused failures on machines
with more than 4G of physical memory.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: "Christopher S. Aker" <caker@theshore.net>
Cc: Ian Campbell <Ian.Campbell@eu.citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It's never used and the comments refer to nonatomic and retry
interchangably. So get rid of it.
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This converts x86, x86-64, and xen to use the new helpers for
smp_call_function() and friends, and adds support for
smp_call_function_single().
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Some Xen hypercalls accept an array of operations to work on. In
general this is because its more efficient for the hypercall to the
work all at once rather than as separate hypercalls (even batched as a
multicall).
This patch adds a mechanism (xen_mc_extend_args()) to allocate more
argument space to the last-issued multicall, in order to extend its
argument list.
The user of this mechanism is xen/mmu.c, which uses it to extend the
args array of mmu_update. This is particularly valuable when doing
the update for a large mprotect, which goes via
ptep_modify_prot_commit(), but it also manages to batch updates to
pgd/pmds as well.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Xen has a pte update function which will update a pte while preserving
its accessed and dirty bits. This means that ptep_modify_prot_start() can be
implemented as a simple read of the pte value. The hardware may
update the pte in the meantime, but ptep_modify_prot_commit() updates it while
preserving any changes that may have happened in the meantime.
The updates in ptep_modify_prot_commit() are batched if we're currently in lazy
mmu mode.
The mmu_update hypercall can take a batch of updates to perform, but
this code doesn't make particular use of that feature, in favour of
using generic multicall batching to get them all into the hypervisor.
The net effect of this is that each mprotect pte update turns from two
expensive trap-and-emulate faults into they hypervisor into a single
hypercall whose cost is amortized in a batched multicall.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds paravirt-ops hooks in pv_mmu_ops for ptep_modify_prot_start and
ptep_modify_prot_commit. This allows the hypervisor-specific backends to
implement these in some more efficient way.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* 'kvm-updates-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
KVM: Remove now unused structs from kvm_para.h
x86: KVM guest: Use the paravirt clocksource structs and functions
KVM: Make kvm host use the paravirt clocksource structs
x86: Make xen use the paravirt clocksource structs and functions
x86: Add structs and functions for paravirt clocksource
KVM: VMX: Fix host msr corruption with preemption enabled
KVM: ioapic: fix lost interrupt when changing a device's irq
KVM: MMU: Fix oops on guest userspace access to guest pagetable
KVM: MMU: large page update_pte issue with non-PAE 32-bit guests (resend)
KVM: MMU: Fix rmap_write_protect() hugepage iteration bug
KVM: close timer injection race window in __vcpu_run
KVM: Fix race between timer migration and vcpu migration
This patch updates the xen guest to use the pvclock structs
and helper functions.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Non-PAE operation has been deprecated in Xen for a while, and is
rarely tested or used. xen-unstable has now officially dropped
non-PAE support. Since Xen/pvops' non-PAE support has also been
broken for a while, we may as well completely drop it altogether.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Because NX is now enforced properly, we must put the hypercall page
into the .text segment so that it is executable.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
Cc: the arch/x86 maintainers <x86@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[ Stable: this isn't a bugfix in itself, but it's a pre-requiste
for "xen: don't drop NX bit" ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
Cc: the arch/x86 maintainers <x86@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Because NX is now enforced properly, we must put the hypercall page
into the .text segment so that it is executable.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
Cc: the arch/x86 maintainers <x86@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[ Stable: this isn't a bugfix in itself, but it's a pre-requiste
for "xen: don't drop NX bit" ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
Cc: the arch/x86 maintainers <x86@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We have a few instances of the open-coded iterative div/mod loop, used
when we don't expcet the dividend to be much bigger than the divisor.
Unfortunately modern gcc's have the tendency to strength "reduce" this
into a full mod operation, which isn't necessarily any faster, and
even if it were, doesn't exist if gcc implements it in libgcc.
The workaround is to put a dummy asm statement in the loop to prevent
gcc from performing the transformation.
This patch creates a single implementation of this loop, and uses it
to replace the open-coded versions I know about.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Segher Boessenkool <segher@kernel.crashing.org>
Cc: Christian Kujau <lists@nerdbynature.de>
Cc: Robert Hancock <hancockr@shaw.ca>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Define recently added XEN_ELFNOTEs, and use them appropriately.
Most significantly, this enables domain checkpointing (xm save -c).
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
On resume, the vcpu timer modes will not be restored. The timer
infrastructure doesn't do this for us, since it assumes the cpus
are offline. We can just poke the other vcpus into the right mode
directly though.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If we're using vcpu_info mapping, then make sure its restored on all
processors before relasing them from stop_machine.
The only complication is that if this fails, we can't continue because
we've already made assumptions that the mapping is available (baked in
calls to the _direct versions of the functions, for example).
Fortunately this can only happen with a 32-bit hypervisor, which may
possibly run out of mapping space. On a 64-bit hypervisor, this is a
non-issue.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When operating on an unpinned pagetable (ie, one under construction or
destruction), it isn't necessary to use a hypercall to update a
pud/pmd entry. Jan Beulich observed that a similar optimisation
avoided many thousands of hypercalls while doing a kernel build.
One tricky part is that early in the kernel boot there's no page
structure, so we can't check to see if the page is pinned. In that
case, we just always use the hypercall.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
introduce init_pg_table_start, so xen PV could specify the value.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
-tip tree auto-testing found the following early bootup hang:
-------------->
get_memcfg_from_srat: assigning address to rsdp
RSD PTR v0 [Nvidia]
BUG: Int 14: CR2 ffd00040
EDI 8092fbfe ESI ffd00040 EBP 80b0aee8 ESP 80b0aed0
EBX 000f76f0 EDX 0000000e ECX 00000003 EAX ffd00040
err 00000000 EIP 802c055a CS 00000060 flg 00010006
Stack: ffd00040 80bc78d0 80b0af6c 80b1dbfe 8093d8ba 00000008 80b42810 80b4ddb4
80b42842 00000000 80b0af1c 801079c8 808e724e 00000000 80b42871 802c0531
00000100 00000000 0003fff0 80b0af40 80129999 00040100 00040100 00000000
Pid: 0, comm: swapper Not tainted 2.6.26-rc4-sched-devel.git #570
[<802c055a>] ? strncmp+0x11/0x25
[<80b1dbfe>] ? get_memcfg_from_srat+0xb4/0x568
[<801079c8>] ? mcount_call+0x5/0x9
[<802c0531>] ? strcmp+0xa/0x22
[<80129999>] ? printk+0x38/0x3a
[<80129999>] ? printk+0x38/0x3a
[<8011b122>] ? memory_present+0x66/0x6f
[<80b216b4>] ? setup_memory+0x13/0x40c
[<80b16b47>] ? propagate_e820_map+0x80/0x97
[<80b1622a>] ? setup_arch+0x248/0x477
[<80129999>] ? printk+0x38/0x3a
[<80b11759>] ? start_kernel+0x6e/0x2eb
[<80b110fc>] ? i386_start_kernel+0xeb/0xf2
=======================
<------
with this config:
http://redhat.com/~mingo/misc/config-Wed_May_28_01_33_33_CEST_2008.bad
The thing is, the crash makes little sense at first sight. We crash on a
benign-looking printk. The code around it got changed in -tip but
checking those topic branches individually did not reproduce the bug.
Bisection led to this commit:
| d5edbc1f75 is first bad commit
| commit d5edbc1f75
| Author: Jeremy Fitzhardinge <jeremy@goop.org>
| Date: Mon May 26 23:31:22 2008 +0100
|
| xen: add p2m mfn_list_list
Which is somewhat surprising, as on native hardware Xen client side
should have little to no side-effects.
After some head scratching, it turns out the following happened:
randconfig enabled the following Xen options:
CONFIG_XEN=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=8
# CONFIG_XEN_BLKDEV_FRONTEND is not set
# CONFIG_XEN_NETDEV_FRONTEND is not set
CONFIG_HVC_XEN=y
# CONFIG_XEN_BALLOON is not set
which activated this piece of code in arch/x86/xen/mmu.c:
> @@ -69,6 +69,13 @@
> __attribute__((section(".data.page_aligned"))) =
> { [ 0 ... TOP_ENTRIES - 1] = &p2m_missing[0] };
>
> +/* Arrays of p2m arrays expressed in mfns used for save/restore */
> +static unsigned long p2m_top_mfn[TOP_ENTRIES]
> + __attribute__((section(".bss.page_aligned")));
> +
> +static unsigned long p2m_top_mfn_list[TOP_ENTRIES / P2M_ENTRIES_PER_PAGE]
> + __attribute__((section(".bss.page_aligned")));
The problem is, you must only put variables into .bss.page_aligned that
have a _size_ that is _exactly_ page aligned. In this case the size of
p2m_top_mfn_list is not page aligned:
80b8d000 b p2m_top_mfn
80b8f000 b p2m_top_mfn_list
80b8f008 b softirq_stack
80b97008 b hardirq_stack
80b9f008 b bm_pte
So all subsequent variables get unaligned which, depending on luck,
breaks the kernel in various funny ways. In this case what killed the
kernel first was the misaligned bootmap pte page, resulting in that
creative crash above.
Anyway, this was a fun bug to track down :-)
I think the moral is that .bss.page_aligned is a dangerous construct in
its current form, and the symptoms of breakage are very non-trivial, so
i think we need build-time checks to make sure all symbols in
.bss.page_aligned are truly page aligned.
The Xen fix below gets the kernel booting again.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Hook into the device model to make sure that timekeeping's resume handler
is called. This deals with our clocksource's non-monotonicity over the
save/restore. Explicitly call clock_has_changed() to make sure that
all the timers get retriggered properly.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch implements Xen save/restore and migration.
Saving is triggered via xenbus, which is polled in
drivers/xen/manage.c. When a suspend request comes in, the kernel
prepares itself for saving by:
1 - Freeze all processes. This is primarily to prevent any
partially-completed pagetable updates from confusing the suspend
process. If CONFIG_PREEMPT isn't defined, then this isn't necessary.
2 - Suspend xenbus and other devices
3 - Stop_machine, to make sure all the other vcpus are quiescent. The
Xen tools require the domain to run its save off vcpu0.
4 - Within the stop_machine state, it pins any unpinned pgds (under
construction or destruction), performs canonicalizes various other
pieces of state (mostly converting mfns to pfns), and finally
5 - Suspend the domain
Restore reverses the steps used to save the domain, ending when all
the frozen processes are thawed.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When saving a domain, the Xen tools need to remap all our mfns to
portable pfns. In order to remap our p2m table, it needs to know
where all its pages are, so maintain the references to the p2m table
for it to use.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Rename dummy_shared_info to xen_dummy_shared_info and make it
non-static, in anticipation of users outside of enlighten.c
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When using sparsemem and memory hotplug, the kernel's pseudo-physical
address space can be discontigious. Previously this was dealt with by
having the upper parts of the radix tree stubbed off. Unfortunately,
this is incompatible with save/restore, which requires a complete p2m
table.
The solution is to have a special distinguished all-invalid p2m leaf
page, which we can point all the hole areas at. This allows the tools
to see a complete p2m table, but it only costs a page for all memory
holes.
It also simplifies the code since it removes a few special cases.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add a config option to set the max size of a Xen domain. This is used
to scale the size of the physical-to-machine array; it ends up using
around 1 page/GByte, so there's no reason to be very restrictive.
For a 32-bit guest, the default value of 8GB is probably sufficient;
there's not much point in giving a 32-bit machine much more memory
than that.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We now support the use of memory hotplug, so the physical to machine
page mapping structure must be dynamic. This is implemented as a
two-level radix tree structure, which allows us to efficiently
incrementally allocate memory for the p2m table as new pages are
added.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Make sure resched interrupts appear in /proc/interrupts in the proper
place.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
move arch/x86/xen/manage.c under drivers/xen/to share codes
with x86 and ia64.
ia64/xen also uses manage.c
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
For some perverse reason, if you call add_preferred_console() it prevents
setup_early_printk() from successfully enabling the boot console -
unless you make it a preferred console too...
Also, make xenboot console output distinct from normal console output,
since it gets repeated when the console handover happens, and the
duplicated output is confusing without disambiguation.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Without console= arguments on the kernel command line, the first
console to register becomes enabled and the preferred console (the one
behind /dev/console). This is normally tty (assuming
CONFIG_VT_CONSOLE is enabled, which it commonly is).
This is okay as long tty is a useful console. But unless we have the
PV framebuffer, and it is enabled for this domain, tty0 in domU is
merely a dummy. In that case, we want the preferred console to be the
Xen console hvc0, and we want it without having to fiddle with the
kernel command line. Commit b8c2d3dfbc
did that for us.
Since we now have the PV framebuffer, we want to enable and prefer tty
again, but only when PVFB is enabled. But even then we still want to
enable the Xen console as well.
Problem: when tty registers, we can't yet know whether the PVFB is
enabled. By the time we can know (xenstore is up), the console setup
game is over.
Solution: enable console tty by default, but keep hvc as the preferred
console. Change the preferred console to tty when PVFB probes
successfully, unless we've been given console kernel parameters.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add pte_flags() to extract the flags from a pte. This is a special
case of pte_val() which is only guaranteed to return the pte's flags
correctly; the page number may be corrupted or missing.
The intent is to allow paravirt implementations to return pte flags
without having to do any translation of the page number (most notably,
Xen).
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When enabling interrupts, we don't need to worry about preemption,
because we either enter with interrupts disabled - so no preemption -
or the caller is confused and is re-enabling interrupts on some
indeterminate processor.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The guest can legitimately change things like cr4.OSFXSR and
OSXMMEXCPT, so let it.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use the new sched_op hypercall, mainly because xenner doesn't support
the old one.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Xen will trap and emulate clts, but its better to use a hypercall.
Also, xenner doesn't handle clts.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change references from for_each_cpu_mask to for_each_cpu_mask_nr
where appropriate
Reviewed-by: Paul Jackson <pj@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
commit 2d474871e2fb092eb46a0930aba5442e10eb96cc
Author: Mike Travis <travis@sgi.com>
Date: Mon May 12 21:21:13 2008 +0200
While I realize that the function isn't currently being used, I still
think an obvious mistake like this should be corrected.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Non-PAE operation has been deprecated in Xen for a while, and is
rarely tested or used. xen-unstable has now officially dropped
non-PAE support. Since Xen/pvops' non-PAE support has also been
broken for a while, we may as well completely drop it altogether.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There's no real reason we can't support sparsemem/discontigmem, so do so.
This is mostly useful to support hotplug memory.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
xen_sysexit and xen_iret were doing essentially the same thing. Rather
than having a separate implementation for xen_sysexit, we can just strip
the stack back to an iret frame and jump into xen_iret. This removes
a lot of code and complexity - specifically, another critical region.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The usual pagetable locking protocol doesn't seem to apply to updates
to init_mm, so don't rely on preemption being disabled in xen_set_pte_at
on init_mm.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Various places in the kernel flush the tlb even though preemption doens't
guarantee the tlb flush is happening on any particular CPU. In many cases
this doesn't seem to matter, so don't make a fuss about it.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
split out x86 specific part from grant-table.c and
allow ia64/xen specific initialization.
ia64/xen grant table is based on pseudo physical address
(guest physical address) unlike x86/xen. On ia64 init_mm
doesn't map identity straight mapped area.
ia64/xen specific grant table initialization is necessary.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
move arch/x86/xen/events.c undedr drivers/xen to share codes
with x86 and ia64. And minor adjustment to compile.
ia64/xen also uses events.c
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
ia64/xen also uses it too. Move it into common place so that
ia64/xen can share the code.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use jmp rather than call for the iret fixup, so its consistent with
the sysexit fixup, and it simplifies the stack (which is already
complex).
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Mask MCE/MCA out of cpu caps. Its harmless to leave them there, but
it does prevent the kernel from starting an unnecessary thread.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If an event comes in while events are currently being processed, then
just increment the counter and have the outer event loop reprocess the
pending events. This prevents unbounded recursion on heavy event
loads (of course massive event storms will cause infinite loops).
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
retrigger_dynirq() was incomplete, and didn't properly set the event
to be pending again. It doesn't seem to actually get used.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Xen supports the notion of a debug interrupt which can be triggered
from the console. For now this is implemented to show pending events,
masks and each CPU's pending event set.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
64-bit Xen supports sysenter for 32-bit guests, so support its
use. (sysenter is faster than int $0x80 in 32-on-64.)
sysexit is still not supported, so we fake it up using iret.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We can fold the essentially common pte functions together now.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
pte_t always contains a "pte" field for the whole pte value, so make
use of it.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Rename (alloc|release)_(pt|pd) to pte/pmd to explicitly match the name
of the appropriate pagetable level structure.
[ x86.git merge work by Mark McLoughlin <markmc@redhat.com> ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
xen does not use the global cpu_initialized mask, but rather,
a specific one. So we change its name so it won't conflict with the upcoming
movement of cpu_initialized_mask from smp_64.h to smp_32.h.
Signed-off-by: Glauber Costa <gcosta@redhat.com>
CC: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Change iret implementation to not be dependent on direct-access vcpu
structure.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This makes the Xen console just work. Before, you had to ask for it
on the kernel command line with console=hvc0
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We need to set up the shared_info pointer once we've mapped the real
shared_info into its fixmap slot. That needs to happen once the general
pagetable setup has been done. Previously, the UP shared_info was set
up one in xen_start_kernel, but that was left pointing to the dummy
shared info. Unfortunately there's no really good place to do a later
setup of the shared_info in UP, so just do it once the pagetable setup
has been done.
[ Stable: needed in 2.6.24.x ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
xen_irq_enable_direct and xen_sysexit were using "andw $0x00ff,
XEN_vcpu_info_pending(vcpu)" to unmask events and test for pending ones
in one instuction.
Unfortunately, the pending flag must be modified with a locked operation
since it can be set by another CPU, and the unlocked form of this
operation was causing the pending flag to get lost, allowing the processor
to return to usermode with pending events and ultimately deadlock.
The simple fix would be to make it a locked operation, but that's rather
costly and unnecessary. The fix here is to split the mask-clearing and
pending-testing into two instructions; the interrupt window between
them is of no concern because either way pending or new events will
be processed.
This should fix lingering bugs in using direct vcpu structure access too.
[ Stable: needed in 2.6.24.x ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Construct Xen guest e820 map with a hole between 640K-1M.
It's pure luck that Xen kernels have gotten away with it in the past.
The patch below seems like the right thing to do. It certainly boots in
a domU without the DMI problem (without any of the other related patches
such as Alexander's).
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Tested-by: Mark McLoughlin <markmc@redhat.com>
Acked-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Fix 32-on-64 pvops kernel:
we don't want userspace using syscall/sysenter, even if the hypervisor
supports it, so mask it out from CPUID.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Unpin the Xen-provided pagetable once we've finished with it, so it
doesn't cause stray references which cause later swapper_pg_dir
pagetable updates to fail.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Tested-by: Jody Belka <knew-linux@pimb.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Adjust the definition of lookup_address to take an unsigned long
level argument. Adjust callers in xen/mmu.c that pass in a
dummy variable.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use xen_khz to denote xen_specific clock speed. Avoid shadowing
cpu_khz.
arch/x86/xen/time.c:220:6: warning: symbol 'cpu_khz' shadows an earlier one
include/asm/tsc.h:17:21: originally declared here
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
based on this patch from Andi Kleen:
| Subject: CPA: Return the page table level in lookup_address()
| From: Andi Kleen <ak@suse.de>
|
| Needed for the next change.
|
| And change all the callers.
and ported it to x86.git.
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Deal properly with pmd-level pages being allocated and freed
dynamically. We can handle them more or less the same as pte pages.
Also, deal with early_ioremap pagetable manipulations.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Looks like a mismerge/misapply dropped one of the cases of pte flag
masking for Xen. Also, only mask the flags for present ptes.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
With this, the paravirt_ops code can be enabled on x86_64 also.
Each guest implementation (Xen, VMI, lguest) now depends on X86_32. The
dependencies can be dropped for each one when they start to support
x86_64.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
additional section for .init.text appending a number.
A side effect of this was a section mismatch warning because modpost did
not recognize a .init.text section named .init.text.1: WARNING:
vmlinux.o(.text.head+0x247): Section mismatch: reference to
.init.text.1:start_kernel (between 'is386' and 'check_x87')
Fix this by hardcoding the "ax" in the pushsection. Thanks to Torlaf for
reporting this.
Alan Modra provided the hint that made me able to locate the root cause of
this warning. And Mike Frysinger told me how to properly fix it using
__INIT/__FINIT.
Fix following Section mismatch warning in addition:
WARNING: vmlinux.o(.text+0x14c8): Section mismatch: reference to .init.data:vsyscall_int80_start (between 'fiddle_vdso' and 'xen_setup_features')
fiddle_vdso was only used from a __init function - so declare it __init.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Based on patch from Jan Beulich <jbeulich@novell.com>.
Don't rely on kmalloc(PAGE_SIZE) returning PAGE_SIZE aligned memory
(Xen requires GDT *and* LDT to be page-aligned). Using the page
allocator interface also removes the (albeit small) slab allocator
overhead. The same change being done for 64-bits for consistency.
Further, the Xen hypercall interface expects the LDT address to be
virtual, not machine.
[ Adjusted to unified ldt.c - Jeremy ]
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The hypervisor doesn't allow PCD or PWT to be set on guest ptes, so
make sure they're masked out. Also, fix up some previous mispatching.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Make sure pte_t, whatever its definition, has a pte element with type
pteval_t. This allows common code to access it without needing to be
specifically parameterised on what pagetable mode we're compiling for.
For 32-bit, this means that pte_t becomes a union with "pte" and "{
pte_low, pte_high }" (PAE) or just "pte_low" (non-PAE).
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
fastcall is always defined to be empty, remove it from arch/x86
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
this patch changes the signature of write_ldt_entry.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
CC: Zachary Amsden <zach@vmware.com>
CC: Jeremy Fitzhardinge <Jeremy.Fitzhardinge.citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch changes the write_gdt_entry function signature.
Instead of the old "a" and "b" parameters, it now receives
a pointer to a desc_struct, and the size of the entry being
handled. This is because x86_64 can have some 16-byte entries
as well as 8-byte ones.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
CC: Zachary Amsden <zach@vmware.com>
CC: Jeremy Fitzhardinge <Jeremy.Fitzhardinge.citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
this patch changes write_idt_entry signature. It now takes a gate_desc
instead of the a and b parameters. It will allow it to be later unified
between i386 and x86_64.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
CC: Zachary Amsden <zach@vmware.com>
CC: Jeremy Fitzhardinge <Jeremy.Fitzhardinge.citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch unifies struct desc_ptr between i386 and x86_64.
They can be expressed in the exact same way in C code, only
having to change the name of one of them. As Xgt_desc_struct
is ugly and big, this is the one that goes away.
There's also a padding field in i386, but it is not really
needed in the C structure definition.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This changes size-specific register names (eip/rip, esp/rsp, etc.) to
generic names in the thread and tss structures.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We have a lot of code which differs only by the naming of specific
members of structures that contain registers. In order to enable
additional unifications, this patch drops the e- or r- size prefix
from the register names in struct pt_regs, and drops the x- prefixes
for segment registers on the 32-bit side.
This patch also performs the equivalent renames in some additional
places that might be candidates for unification in the future.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
'for_each_possible_cpu(i)' when there's a _remote possibility_ of
dereferencing a non-allocated per_cpu variable involved.
All files except mm/vmstat.c are x86 arch.
Thanks to pageexec@freemail.hu for pointing this out.
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: <pageexec@freemail.hu>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This makes x86_64's ia32 emulation support share the sources used in the
32-bit kernel for the 32-bit vDSO and much of its setup code.
The 32-bit vDSO mapping now behaves the same on x86_64 as on native 32-bit.
The abi.syscall32 sysctl on x86_64 now takes the same values that
vm.vdso_enabled takes on the 32-bit kernel. That is, 1 means a randomized
vDSO location, 2 means the fixed old address. The CONFIG_COMPAT_VDSO
option is now available to make this the default setting, the same meaning
it has for the 32-bit kernel. (This does not affect the 64-bit vDSO.)
The argument vdso32=[012] can be used on both 32-bit and 64-bit kernels to
set this paramter at boot time. The vdso=[012] argument still does this
same thing on the 32-bit kernel.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This makes the i386 kernel use the new vDSO build in arch/x86/vdso/vdso32/
to replace the old one from arch/x86/kernel/.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch consolidates the irqflags include files containing common
paravirt definitions. The native definition for interrupt handling, halt,
and such, are the same for 32 and 64 bit, and they are kept in irqflags.h.
the differences are split in the arch-specific files.
The syscall function, irq_enable_sysexit, has a very specific i386 naming,
and its name is then changed to a more general one.
Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use u32 so 32 and 64bit have the same interface.
Andrew Morton: xen, lguest build fixes
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
There have been several reports of Xen guest domains locking up when
using vcpu_info structure placement. Disable it for now.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some versions of Xen 3.x set their magic number to "xen-3.[12]", so
relax the test to match them.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
_PAGE_PCD maps a page with caching disabled, which is typically used for
mapping harware registers. Xen never allows it to be set on a mapping, and
unprivileged guests never need it since they can't see the real underlying
hardware. However, some uncached mappings are made early when probing the
(non-existent) APIC, and its OK to mask off the PCD flag in these cases.
This became necessary because Xen started checking for this bit, rather
than silently masking it off.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rather than hand-rolling our own prototype, make the code more
future-proof by using the standard irq_handler_t typedef.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
1) Group all the "guest OS" support options together, under a PARAVIRT_GUEST
menu.
2) Make those options select CONFIG_PARAVIRT, as suggested by Andi.
3) Make kconfig help titles consistent.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Cc: Zach Amsden <zach@vmware.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Chris Wright <chrisw@sous-sol.org>
Add missing IRQs and IRQ descriptions to /proc/interrupts.
/proc/interrupts is most useful when it displays every IRQ vector in use by
the system, not just those somebody thought would be interesting.
This patch inserts the following vector displays to the i386 and x86_64
platforms, as appropriate:
rescheduling interrupts
TLB flush interrupts
function call interrupts
thermal event interrupts
threshold interrupts
spurious interrupts
A threshold interrupt occurs when ECC memory correction is occuring at too
high a frequency. Thresholds are used by the ECC hardware as occasional
ECC failures are part of normal operation, but long sequences of ECC
failures usually indicate a memory chip that is about to fail.
Thermal event interrupts occur when a temperature threshold has been
exceeded for some CPU chip. IIRC, a thermal interrupt is also generated
when the temperature drops back to a normal level.
A spurious interrupt is an interrupt that was raised then lowered by the
device before it could be fully processed by the APIC. Hence the apic sees
the interrupt but does not know what device it came from. For this case
the APIC hardware will assume a vector of 0xff.
Rescheduling, call, and TLB flush interrupts are sent from one CPU to
another per the needs of the OS. Typically, their statistics would be used
to discover if an interrupt flood of the given type has been occuring.
AK: merged v2 and v4 which had some more tweaks
AK: replace Local interrupts with Local timer interrupts
AK: Fixed description of interrupt types.
[ tglx: arch/x86 adaptation ]
[ mingo: small cleanup ]
Signed-off-by: Joe Korty <joe.korty@ccur.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Tim Hockin <thockin@hockin.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* 'xen-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
xfs: eagerly remove vmap mappings to avoid upsetting Xen
xen: add some debug output for failed multicalls
xen: fix incorrect vcpu_register_vcpu_info hypercall argument
xen: ask the hypervisor how much space it needs reserved
xen: lock pte pages while pinning/unpinning
xen: deal with stale cr3 values when unpinning pagetables
xen: add batch completion callbacks
xen: yield to IPI target if necessary
Clean up duplicate includes in arch/i386/xen/
remove dead code in pgtable_cache_init
paravirt: clean up lazy mode handling
paravirt: refactor struct paravirt_ops into smaller pv_*_ops
Multicalls are expected to never fail, and the normal response to a
failed multicall is very terse. In the interests of better
debuggability, add some more verbose output. It may be worth turning
this off once it all seems more tested.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
The kernel's copy of struct vcpu_register_vcpu_info was out of date,
at best causing the hypercall to fail and the guest kernel to fall
back to the old mechanism, or worse, causing random memory corruption.
[ Stable folks: applies to 2.6.23 ]
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Stable Kernel <stable@kernel.org>
Cc: Morten =?utf-8?q?B=C3=B8geskov?= <xen-users@morten.bogeskov.dk>
Cc: Mark Williamson <mark.williamson@cl.cam.ac.uk>
Ask the hypervisor how much space it needs reserved, since 32-on-64
doesn't need any space, and it may change in future.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
When a pagetable is created, it is made globally visible in the rmap
prio tree before it is pinned via arch_dup_mmap(), and remains in the
rmap tree while it is unpinned with arch_exit_mmap().
This means that other CPUs may race with the pinning/unpinning
process, and see a pte between when it gets marked RO and actually
pinned, causing any pte updates to fail with write-protect faults.
As a result, all pte pages must be properly locked, and only unlocked
once the pinning/unpinning process has finished.
In order to avoid taking spinlocks for the whole pagetable - which may
overflow the PREEMPT_BITS portion of preempt counter - it locks and pins
each pte page individually, and then finally pins the whole pagetable.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickens <hugh@veritas.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Keir Fraser <keir@xensource.com>
Cc: Jan Beulich <jbeulich@novell.com>
When a pagetable is no longer in use, it must be unpinned so that its
pages can be freed. However, this is only possible if there are no
stray uses of the pagetable. The code currently deals with all the
usual cases, but there's a rare case where a vcpu is changing cr3, but
is doing so lazily, and the change hasn't actually happened by the time
the pagetable is unpinned, even though it appears to have been completed.
This change adds a second per-cpu cr3 variable - xen_current_cr3 -
which tracks the actual state of the vcpu cr3. It is only updated once
the actual hypercall to set cr3 has been completed. Other processors
wishing to unpin a pagetable can check other vcpu's xen_current_cr3
values to see if any cross-cpu IPIs are needed to clean things up.
[ Stable folks: 2.6.23 bugfix ]
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Stable Kernel <stable@kernel.org>
This adds a mechanism to register a callback function to be called once
a batch of hypercalls has been issued. This is typically used to unlock
things which must remain locked until the hypercall has taken place.
[ Stable folks: pre-req for 2.6.23 bugfix "xen: deal with stale cr3
values when unpinning pagetables" ]
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Stable Kernel <stable@kernel.org>
This patch cleans up duplicate includes in
arch/i386/xen/
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Currently, the set_lazy_mode pv_op is overloaded with 5 functions:
1. enter lazy cpu mode
2. leave lazy cpu mode
3. enter lazy mmu mode
4. leave lazy mmu mode
5. flush pending batched operations
This complicates each paravirt backend, since it needs to deal with
all the possible state transitions, handling flushing, etc. In
particular, flushing is quite distinct from the other 4 functions, and
seems to just cause complication.
This patch removes the set_lazy_mode operation, and adds "enter" and
"leave" lazy mode operations on mmu_ops and cpu_ops. All the logic
associated with enter and leaving lazy states is now in common code
(basically BUG_ONs to make sure that no mode is current when entering
a lazy mode, and make sure that the mode is current when leaving).
Also, flush is handled in a common way, by simply leaving and
re-entering the lazy mode.
The result is that the Xen, lguest and VMI lazy mode implementations
are much simpler.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Zach Amsden <zach@vmware.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Avi Kivity <avi@qumranet.com>
Cc: Anthony Liguory <aliguori@us.ibm.com>
Cc: "Glauber de Oliveira Costa" <glommer@gmail.com>
Cc: Jun Nakajima <jun.nakajima@intel.com>
This patch refactors the paravirt_ops structure into groups of
functionally related ops:
pv_info - random info, rather than function entrypoints
pv_init_ops - functions used at boot time (some for module_init too)
pv_misc_ops - lazy mode, which didn't fit well anywhere else
pv_time_ops - time-related functions
pv_cpu_ops - various privileged instruction ops
pv_irq_ops - operations for managing interrupt state
pv_apic_ops - APIC operations
pv_mmu_ops - operations for managing pagetables
There are several motivations for this:
1. Some of these ops will be general to all x86, and some will be
i386/x86-64 specific. This makes it easier to share common stuff
while allowing separate implementations where needed.
2. At the moment we must export all of paravirt_ops, but modules only
need selected parts of it. This allows us to export on a case by case
basis (and also choose which export license we want to apply).
3. Functional groupings make things a bit more readable.
Struct paravirt_ops is now only used as a template to generate
patch-site identifiers, and to extract function pointers for inserting
into jmp/calls when patching. It is only instantiated when needed.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Cc: Zach Amsden <zach@vmware.com>
Cc: Avi Kivity <avi@qumranet.com>
Cc: Anthony Liguory <aliguori@us.ibm.com>
Cc: "Glauber de Oliveira Costa" <glommer@gmail.com>
Cc: Jun Nakajima <jun.nakajima@intel.com>
Convert cpu_sibling_map from a static array sized by NR_CPUS to a per_cpu
variable. This saves sizeof(cpumask_t) * NR unused cpus. Access is mostly
from startup and CPU HOTPLUG functions.
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is from an earlier message from 'Christoph Lameter':
cpu_core_map is currently an array defined using NR_CPUS. This means that
we overallocate since we will rarely really use maximum configured cpu.
If we put the cpu_core_map into the per cpu area then it will be allocated
for each processor as it comes online.
This means that the core map cannot be accessed until the per cpu area
has been allocated. Xen does a weird thing here looping over all processors
and zeroing the masks that are not yet allocated and that will be zeroed
when they are allocated. I commented the code out.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
