Documentation for the kernel.modprobe sysctl was added both by
commit 0317c5371e ("docs: merge debugging-modules.txt into
sysctl/kernel.rst") and by commit 6e71582506 ("docs: admin-guide:
document the kernel.modprobe sysctl"), resulting in the same sysctl
being documented in two places. Merge these into one place.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20200414172430.230293-1-ebiggers@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Use the correct prototypes for do_gettimeofday(), getnstimeofday() and
getnstimeofday64(). All of these returned void and passed the return
value by reference. This should make the documentation of their
deprecation and replacements easier to search for.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200414221222.23996-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Returning the error code via a 'int *ret' when the function returns a
pointer is very un-kernely and causes gcc 10's static analysis to choke:
net/rds/message.c: In function ‘rds_message_map_pages’:
net/rds/message.c:358:10: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
358 | return ERR_PTR(ret);
Use a typical ERR_PTR return instead.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To rehash a previous explanation given in commit 1c44ce560b ("net:
mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is
up"), the switch driver operates the in a mode where a single VLAN can
be transmitted as untagged on a particular egress port. That is the
"native VLAN on trunk port" use case.
The configuration for this native VLAN is driven in 2 ways:
- Set the egress port rewriter to strip the VLAN tag for the native
VID (as it is egress-untagged, after all).
- Configure the ingress port to drop untagged and priority-tagged
traffic, if there is no native VLAN. The intention of this setting is
that a trunk port with no native VLAN should not accept untagged
traffic.
Since both of the above configurations for the native VLAN should only
be done if VLAN awareness is requested, they are actually done from the
ocelot_port_vlan_filtering function, after the basic procedure of
toggling the VLAN awareness flag of the port.
But there's a problem with that simplistic approach: we are trying to
juggle with 2 independent variables from a single function:
- Native VLAN of the port - its value is held in port->vid.
- VLAN awareness state of the port - currently there are some issues
here, more on that later*.
The actual problem can be seen when enslaving the switch ports to a VLAN
filtering bridge:
0. The driver configures a pvid of zero for each port, when in
standalone mode. While the bridge configures a default_pvid of 1 for
each port that gets added as a slave to it.
1. The bridge calls ocelot_port_vlan_filtering with vlan_aware=true.
The VLAN-filtering-dependent portion of the native VLAN
configuration is done, considering that the native VLAN is 0.
2. The bridge calls ocelot_vlan_add with vid=1, pvid=true,
untagged=true. The native VLAN changes to 1 (change which gets
propagated to hardware).
3. ??? - nobody calls ocelot_port_vlan_filtering again, to reapply the
VLAN-filtering-dependent portion of the native VLAN configuration,
for the new native VLAN of 1. One can notice that after toggling "ip
link set dev br0 type bridge vlan_filtering 0 && ip link set dev br0
type bridge vlan_filtering 1", the new native VLAN finally makes it
through and untagged traffic finally starts flowing again. But
obviously that shouldn't be needed.
So it is clear that 2 independent variables need to both re-trigger the
native VLAN configuration. So we introduce the second variable as
ocelot_port->vlan_aware.
*Actually both the DSA Felix driver and the Ocelot driver already had
each its own variable:
- Ocelot: ocelot_port_private->vlan_aware
- Felix: dsa_port->vlan_filtering
but the common Ocelot library needs to work with a single, common,
variable, so there is some refactoring done to move the vlan_aware
property from the private structure into the common ocelot_port
structure.
Fixes: 97bb69e1e3 ("net: mscc: ocelot: break apart ocelot_vlan_port_apply")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2020-04-15
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 3 day(s) which contain
a total of 11 files changed, 238 insertions(+), 95 deletions(-).
The main changes are:
1) Fix offset overflow for BPF_MEM BPF_DW insn mapping on arm32 JIT,
from Luke Nelson and Xi Wang.
2) Prevent mprotect() to make frozen & mmap()'ed BPF map writeable
again, from Andrii Nakryiko and Jann Horn.
3) Fix type of old_fd in bpf_xdp_set_link_opts to int in libbpf and add
selftests, from Toke Høiland-Jørgensen.
4) Fix AF_XDP to check that headroom cannot be larger than the available
space in the chunk, from Magnus Karlsson.
5) Fix reset of XDP prog when expected_fd is set, from David Ahern.
6) Fix a segfault in bpftool's struct_ops command when BTF is not
available, from Daniel T. Lee.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* FTM responder policy netlink validation fix
(but the only user validates again later)
* kernel-doc fixes
* a fix for a race in mac80211 radio registration vs. userspace
* a mesh channel switch fix
* a fix for a syzbot reported kasprintf() issue
-----BEGIN PGP SIGNATURE-----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=1yy8
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-net-2020-04-15' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A couple of fixes:
* FTM responder policy netlink validation fix
(but the only user validates again later)
* kernel-doc fixes
* a fix for a race in mac80211 radio registration vs. userspace
* a mesh channel switch fix
* a fix for a syzbot reported kasprintf() issue
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
DMA transfer could be completed, but CPU (which handles DMA interrupt)
may get too busy and can't handle the interrupt in a timely manner,
despite of DMA IRQ being raised. In this case the DMA state needs to
synchronized before terminating DMA transfer in order not to miss the
DMA transfer completion.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Boot CPU0 always handle I2C interrupt and under some rare circumstances
(like running KASAN + NFS root) it may stuck in uninterruptible state for
a significant time. In this case we will get timeout if I2C transfer is
running on a sibling CPU, despite of IRQ being raised. In order to handle
this rare condition, the IRQ status needs to be checked after completion
timeout.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
In assembly, many instances of __emit_inst(x) expand to a directive. In
a few places __emit_inst(x) is used as an assembler macro argument. For
example, in arch/arm64/kvm/hyp/entry.S
ALTERNATIVE(nop, SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN)
expands to the following by the C preprocessor:
alternative_insn nop, .inst (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1
Both comma and space are separators, with an exception that content
inside a pair of parentheses/quotes is not split, so the clang
integrated assembler splits the arguments to:
nop, .inst, (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1
GNU as preprocesses the input with do_scrub_chars(). Its arm64 backend
(along with many other non-x86 backends) sees:
alternative_insn nop,.inst(0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1
# .inst(...) is parsed as one argument
while its x86 backend sees:
alternative_insn nop,.inst (0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1
# The extra space before '(' makes the whole .inst (...) parsed as two arguments
The non-x86 backend's behavior is considered unintentional
(https://sourceware.org/bugzilla/show_bug.cgi?id=25750).
So drop the space separator inside `.inst (...)` to make the clang
integrated assembler work.
Suggested-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/939
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
David Ahern noticed that there was a bug in the EXPECTED_FD code so
programs did not get detached properly when that parameter was supplied.
This case was not included in the xdp_attach tests; so let's add it to be
sure that such a bug does not sneak back in down.
Fixes: 87854a0b57 ("selftests/bpf: Add tests for attaching XDP programs")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200414145025.182163-2-toke@redhat.com
The 'old_fd' parameter used for atomic replacement of XDP programs is
supposed to be an FD, but was left as a u32 from an earlier iteration of
the patch that added it. It was converted to an int when read, so things
worked correctly even with negative values, but better change the
definition to correctly reflect the intention.
Fixes: bd5ca3ef93 ("libbpf: Add function to set link XDP fd while specifying old program")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200414145025.182163-1-toke@redhat.com
For some types of BPF programs that utilize expected_attach_type, libbpf won't
set load_attr.expected_attach_type, even if expected_attach_type is known from
section definition. This was done to preserve backwards compatibility with old
kernels that didn't recognize expected_attach_type attribute yet (which was
added in 5e43f899b0 ("bpf: Check attach type at prog load time"). But this
is problematic for some BPF programs that utilize newer features that require
kernel to know specific expected_attach_type (e.g., extended set of return
codes for cgroup_skb/egress programs).
This patch makes libbpf specify expected_attach_type by default, but also
detect support for this field in kernel and not set it during program load.
This allows to have a good metadata for bpf_program
(e.g., bpf_program__get_extected_attach_type()), but still work with old
kernels (for cases where it can work at all).
Additionally, due to expected_attach_type being always set for recognized
program types, bpf_program__attach_cgroup doesn't have to do extra checks to
determine correct attach type, so remove that additional logic.
Also adjust section_names selftest to account for this change.
More detailed discussion can be found in [0].
[0] https://lore.kernel.org/bpf/20200412003604.GA15986@rdna-mbp.dhcp.thefacebook.com/
Fixes: 5cf1e91456 ("bpf: cgroup inet skb programs can return 0 to 3")
Fixes: 5e43f899b0 ("bpf: Check attach type at prog load time")
Reported-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20200414182645.1368174-1-andriin@fb.com
Add a check that the headroom cannot be larger than the available
space in the chunk. In the current code, a malicious user can set the
headroom to a value larger than the chunk size minus the fixed XDP
headroom. That way packets with a length larger than the supported
size in the umem could get accepted and result in an out-of-bounds
write.
Fixes: c0c77d8fb7 ("xsk: add user memory registration support sockopt")
Reported-by: Bui Quang Minh <minhquangbui99@gmail.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=207225
Link: https://lore.kernel.org/bpf/1586849715-23490-1-git-send-email-magnus.karlsson@intel.com
The aarch32_vdso_pages[] array never has entries allocated in the C_VVAR
or C_VDSO slots, and as the array is zero initialized these contain
NULL.
However in __aarch32_alloc_vdso_pages() when
aarch32_alloc_kuser_vdso_page() fails we attempt to free the page whose
struct page is at NULL, which is obviously nonsensical.
This patch removes the erroneous page freeing.
Fixes: 7c1deeeb01 ("arm64: compat: VDSO setup for compat layer")
Cc: <stable@vger.kernel.org> # 5.3.x-
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
All in-tree users have been converted to the new i2c_new_scanned_device
function, so remove this deprecated one.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
device_property_read_u32() returns errno or 0, so we should use the
integer variable 'ret' and not the u32 'val' to hold the retval.
Fixes: 0560ad5762 ("i2c: altera: Add Altera I2C Controller driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
We already set DPM_FLAG_SMART_PREPARE, so we completely skip all
callbacks (other then prepare) where possible, quoting from
dw_i2c_plat_prepare():
/*
* If the ACPI companion device object is present for this device, it
* may be accessed during suspend and resume of other devices via I2C
* operation regions, so tell the PM core and middle layers to avoid
* skipping system suspend/resume callbacks for it in that case.
*/
return !has_acpi_companion(dev);
Also setting the DPM_FLAG_SMART_SUSPEND will cause acpi_subsys_suspend()
to leave the controller runtime-suspended even if dw_i2c_plat_prepare()
returned 0.
Leaving the controller runtime-suspended normally, when the I2C controller
is suspended during the suspend_late phase, is not an issue because
the pm_runtime_get_sync() done by i2c_dw_xfer() will (runtime-)resume it.
But for dw I2C controllers on Bay- and Cherry-Trail devices acpi_lpss.c
leaves the controller alive until the suspend_noirq phase, because it may
be used by the _PS3 ACPI methods of PCI devices and PCI devices are left
powered on until the suspend_noirq phase.
Between the suspend_late and resume_early phases runtime-pm is disabled.
So for any ACPI I2C OPRegion accesses done after the suspend_late phase,
the pm_runtime_get_sync() done by i2c_dw_xfer() is a no-op and the
controller is left runtime-suspended.
i2c_dw_xfer() has a check to catch this condition (rather then waiting
for the I2C transfer to timeout because the controller is suspended).
acpi_subsys_suspend() leaving the controller runtime-suspended in
combination with an ACPI I2C OPRegion access done after the suspend_late
phase triggers this check, leading to the following error being logged
on a Bay Trail based Lenovo Thinkpad 8 tablet:
[ 93.275882] i2c_designware 80860F41:00: Transfer while suspended
[ 93.275993] WARNING: CPU: 0 PID: 412 at drivers/i2c/busses/i2c-designware-master.c:429 i2c_dw_xfer+0x239/0x280
...
[ 93.276252] Workqueue: kacpi_notify acpi_os_execute_deferred
[ 93.276267] RIP: 0010:i2c_dw_xfer+0x239/0x280
...
[ 93.276340] Call Trace:
[ 93.276366] __i2c_transfer+0x121/0x520
[ 93.276379] i2c_transfer+0x4c/0x100
[ 93.276392] i2c_acpi_space_handler+0x219/0x510
[ 93.276408] ? up+0x40/0x60
[ 93.276419] ? i2c_acpi_notify+0x130/0x130
[ 93.276433] acpi_ev_address_space_dispatch+0x1e1/0x252
...
So since on BYT and CHT platforms we want ACPI I2c OPRegion accesses
to work until the suspend_noirq phase, we need the controller to be
runtime-resumed during the suspend phase if it is runtime-suspended
suspended at that time. This means that we must not set the
DPM_FLAG_SMART_SUSPEND on these platforms.
On BYT and CHT we already have a special ACCESS_NO_IRQ_SUSPEND flag
to make sure the controller stays functional until the suspend_noirq
phase. This commit makes the driver not set the DPM_FLAG_SMART_SUSPEND
flag when that flag is set.
Cc: stable@vger.kernel.org
Fixes: b30f2f6556 ("i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Fix the following sparse warning:
arch/x86/kernel/umip.c:84:12: warning: symbol 'umip_insns' was not declared.
Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://lkml.kernel.org/r/20200413082213.22934-1-yanaijie@huawei.com
Work around this warning:
kernel/sched/cputime.c: In function ‘kcpustat_field’:
kernel/sched/cputime.c:1007:6: warning: ‘val’ may be used uninitialized in this function [-Wmaybe-uninitialized]
because GCC can't see that val is used only when err is 0.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200327214334.GF8015@zn.tnic
The "isolcpus=" parameter allows sub-parameters before the cpulist is
specified, and if the parser detects an unknown sub-parameters the whole
parameter will be ignored.
This design is incompatible with itself when new sub-parameters are added.
An older kernel will not recognize the new sub-parameter and will
invalidate the whole parameter so the CPU isolation will not take
effect. It emits a warning:
isolcpus: Error, unknown flag
The better and compatible way is to allow "isolcpus=" to skip unknown
sub-parameters, so that even if new sub-parameters are added an older
kernel will still be able to behave as usual even if with the new
sub-parameter specified on the command line.
Ideally this should have been there when the first sub-parameter for
"isolcpus=" was introduced.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200403223517.406353-1-peterx@redhat.com
CLONE_ARGS_SIZE_VER* macros are defined explicitly and not via
the offsets of the relevant struct clone_args fields, which makes
it rather error-prone, so it probably makes sense to add some
compile-time checks for them (including the one that breaks
on struct clone_args extension as a reminder to add a relevant
size macro and a similar check). Function copy_clone_args_from_user
seems to be a good place for such checks.
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200412202658.GA31499@asgard.redhat.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Passing CLONE_INTO_CGROUP with an under-sized structure (that doesn't
properly contain cgroup field) seems like garbage input, especially
considering the fact that fd 0 is a valid descriptor.
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200412203123.GA5869@asgard.redhat.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Checking that cgroup field value of struct clone_args is less than 0
is useless, as it is defined as unsigned 64-bit integer. Moreover,
it doesn't catch the situations where its higher bits are lost during
the assignment to the cgroup field of the cgroup field of the internal
struct kernel_clone_args (where it is declared as signed 32-bit
integer), so it is still possible to pass garbage there. A check
against INT_MAX solves both these issues.
Fixes: ef2c41cf38 ("clone3: allow spawning processes into cgroups")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20200412202533.GA29554@asgard.redhat.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Previously mesh channel switch happens if beacon contains
CSA IE without checking the mesh peer info. Due to that
channel switch happens even if the beacon is not from
its own mesh peer. Fixing that by checking if the CSA
originated from the same mesh network before proceeding
for channel switch.
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1585403604-29274-1-git-send-email-tamizhr@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A race condition leading to a kernel crash is observed during invocation
of ieee80211_register_hw() on a dragonboard410c device having wcn36xx
driver built as a loadable module along with a wifi manager in user-space
waiting for a wifi device (wlanX) to be active.
Sequence diagram for a particular kernel crash scenario:
user-space ieee80211_register_hw() ieee80211_tasklet_handler()
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
| | |
|<---phy0----wiphy_register() |
|-----iwd if_add---->| |
| |<---IRQ----(RX packet)
| Kernel crash |
| due to unallocated |
| workqueue. |
| | |
| alloc_ordered_workqueue() |
| | |
| Misc wiphy init. |
| | |
| ieee80211_if_add() |
| | |
As evident from above sequence diagram, this race condition isn't specific
to a particular wifi driver but rather the initialization sequence in
ieee80211_register_hw() needs to be fixed. So re-order the initialization
sequence and the updated sequence diagram would look like:
user-space ieee80211_register_hw() ieee80211_tasklet_handler()
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
| | |
| alloc_ordered_workqueue() |
| | |
| Misc wiphy init. |
| | |
|<---phy0----wiphy_register() |
|-----iwd if_add---->| |
| |<---IRQ----(RX packet)
| | |
| ieee80211_if_add() |
| | |
Cc: stable@vger.kernel.org
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/1586254255-28713-1-git-send-email-sumit.garg@linaro.org
[Johannes: fix rtnl imbalances]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When checking for draining with __req_need_defer(), it tries to match
how many requests were sent before a current one with number of already
completed. Dropped SQEs are included in req->sequence, and they won't
ever appear in CQ. To compensate for that, __req_need_defer() substracts
ctx->cached_sq_dropped.
However, what it should really use is number of SQEs dropped __before__
the current one. In other words, any submitted request shouldn't
shouldn't affect dequeueing from the drain queue of previously submitted
ones.
Instead of saving proper ctx->cached_sq_dropped in each request,
substract from req->sequence it at initialisation, so it includes number
of properly submitted requests.
note: it also changes behaviour of timeouts, but
1. it's already diverge from the description because of using SQ
2. the description is ambiguous regarding dropped SQEs
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->timeout.count and req->io->timeout.seq_offset store the same value,
which is sqe->off. Kill the second one
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_timeout() can be executed asynchronously by a worker and without
holding ctx->uring_lock
1. using ctx->cached_sq_head there is racy there
2. it should count events from a moment of timeout's submission, but
not execution
Use req->sequence.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Russell King says:
====================
Fix 88x3310 leaving power save mode
This series fixes a problem with the 88x3310 PHY on Macchiatobin
coming out of powersave mode noticed by Matteo Croce. It seems
that certain PHY firmwares do not properly exit powersave mode,
resulting in a fibre link not coming up.
The solution appears to be to soft-reset the PHY after clearing
the powersave bit.
We add support for reporting the PHY firmware version to the kernel
log, and use it to trigger this new behaviour if we have v0.3.x.x
or more recent firmware on the PHY. This, however, is a guess as
the firmware revision documentation does not mention this issue,
and we know that v0.2.1.0 works without this fix but v0.3.3.0 and
later does not.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Soft-reset the PHY when coming out of low power mode, which seems to
be necessary with firmware versions 0.3.3.0 and 0.3.10.0.
This depends on ("net: marvell10g: report firmware version")
Fixes: c9cc1c815d ("net: phy: marvell10g: place in powersave mode at probe")
Reported-by: Matteo Croce <mcroce@redhat.com>
Tested-by: Matteo Croce <mcroce@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Report the firmware version when probing the PHY to allow issues
attributable to firmware to be diagnosed.
Tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Positive return values are also failures that don't set val,
although this probably can't happen. Fixes gcc 10 warning:
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function ‘t4_phy_fw_ver’:
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:3747:14: warning: ‘val’ may be used uninitialized in this function [-Wmaybe-uninitialized]
3747 | *phy_fw_ver = val;
Fixes: 01b6961410 ("cxgb4: Add PHY firmware support for T420-BT cards")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow all the RGMII modes to be used. (Not only "rgmii", "rgmii-id"
but "rgmii-txid", "rgmii-rxid")
Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn says:
====================
mv88e6xxx fixed link fixes
Recent changes for how the MAC is configured broke fixed links, as
used by CPU/DSA ports, and for SFPs when phylink cannot be used. The
first fix is unchanged from v1. The second fix takes a different
solution than v1. If a CPU or DSA port is known to have a PHYLINK
instance, configure the port down before instantiating the PHYLINK, so
it is in the down state as expected by PHYLINK.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA and CPU ports can be configured in two ways. By default, the
driver should configure such ports to there maximum bandwidth. For
most use cases, this is sufficient. When this default is insufficient,
a phylink instance can be bound to such ports, and phylink will
configure the port, e.g. based on fixed-link properties. phylink
assumes the port is initially down. Given that the driver should have
already configured it to its maximum speed, ask the driver to down
the port before instantiating the phylink instance.
Fixes: 30c4a5b0aa ("net: mv88e6xxx: use resolved link config in mac_link_up()")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 88e6185 is reporting it has detected a PHY, when a port is
connected to an SFP. As a result, the fixed-phy configuration is not
being applied. That then breaks packet transfer, since the port is
reported as being down.
Add additional conditions to check the interface mode, and if it is
fixed always configure the port on link up/down, independent of the
PPU status.
Fixes: 30c4a5b0aa ("net: mv88e6xxx: use resolved link config in mac_link_up()")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson says:
====================
ionic: address automated build complaints
Kernel build checks found a couple of things to improve.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove an unused initialized value.
Fixes: 7e4d47596b ("ionic: replay filters after fw upgrade")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the appropriate header for using dynamic_hex_dump(), which
seems to be incidentally included in some configurations but
not all.
Fixes: 7e4d47596b ("ionic: replay filters after fw upgrade")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the DATA packet transmission to disable nofrag for UDPv4 on an AF_INET6
socket as well as UDPv6 when trying to transmit fragmentably.
Without this, packets filled to the normal size used by the kernel AFS
client of 1412 bytes be rejected by udp_sendmsg() with EMSGSIZE
immediately. The ->sk_error_report() notification hook is called, but
rxrpc doesn't generate a trace for it.
This is a temporary fix; a more permanent solution needs to involve
changing the size of the packets being filled in accordance with the MTU,
which isn't currently done in AF_RXRPC. The reason for not doing so was
that, barring the last packet in an rx jumbo packet, jumbos can only be
assembled out of 1412-byte packets - and the plan was to construct jumbos
on the fly at transmission time.
Also, there's no point turning on IPV6_MTU_DISCOVER, since IPv6 has to
engage in this anyway since fragmentation is only done by the sender. We
can then condense the switch-statement in rxrpc_send_data_packet().
Fixes: 75b54cb57c ("rxrpc: Add IPv6 support")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KSZ9131 will not work with some switches due to workaround for KSZ9031
introduced in commit d2fd719bcb
("net/phy: micrel: Add workaround for bad autoneg").
Use genphy_read_status instead of dedicated ksz9031_read_status.
Fixes: bff5b4b373 ("net: phy: micrel: add Microchip KSZ9131 initial driver")
Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge an operating performance points (OPP) framework update for
5.7-rc2 from Viresh Kumar:
"This contains a single patch that lets the OPP core to be used by
several IO drivers without making a lot of changes in them for the
case where the same driver may be used by a platform with an OPP
table or a clock node on another one. I am looking to get this into
5.7 release itself, which will enable other users (in multiple
frameworks) to get merged without waiting for the dependency to get
resolved."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Manage empty OPP tables with clk handle
phy-rockchip-inno-usb2.txt was converted to yaml.
Fix the corresponding reference.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Changeset 32ced09d79 ("dt-bindings: serial: Convert slave-device bindings to json-schema")
moved a binding to json and updated the links.
Yet, one link was not changed, due to a merge conflict.
Update this one too.
Fixes: 32ced09d79 ("dt-bindings: serial: Convert slave-device bindings to json-schema")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
This file was removed, and another file was added instead of
it, on two separate commits.
Splitting a single logical change (doc conversion) on two
patches is a bad thing, as it makes harder to discover what
crap happened.
Anyway, this patch fixes the broken reference, making it
pointing to the new location of the file.
Fixes: 922003733d ("dt-bindings: phy: Remove Cadence MHDP PHY dt binding")
Fixes: c6d8eef38b7f ("dt-bindings: phy: Add Cadence MHDP PHY bindings in YAML format.")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
'loongson,parent_int_map' is an array, but the schema is defining a
matrix resulting in the follow warnings:
Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.example.dt.yaml:
interrupt-controller@3ff01400: loongson,parent_int_map:0: [4043309055] is too short
Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.example.dt.yaml:
interrupt-controller@3ff01400: loongson,parent_int_map:1: [251658240] is too short
Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.example.dt.yaml:
interrupt-controller@3ff01400: loongson,parent_int_map:2: [0] is too short
Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.example.dt.yaml:
interrupt-controller@3ff01400: loongson,parent_int_map:3: [0] is too short
The correct way to define an array is a list in 'items' and/or a size
defined by 'minItems' and 'maxItems'.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Fix the path warnings in the adi,axi-fan-control and adt7475 bindings:
Documentation/devicetree/bindings/hwmon/adt7475.yaml: $id:
relative path/filename doesn't match actual path or filename
expected: http://devicetree.org/schemas/hwmon/adt7475.yaml#
Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml: $id:
relative path/filename doesn't match actual path or filename
expected: http://devicetree.org/schemas/hwmon/adi,axi-fan-control.yaml#
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Rob Herring <robh@kernel.org>
A recent update to dtc and changes to the default warnings introduced
some new warnings in the DT binding examples:
Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.example.dts:23.13-61:
Warning (dma_ranges_format): /example-0/dram-controller@1c01000:dma-ranges: "dma-ranges" property has invalid length (12 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.example.dts:17.22-28.11:
Warning (unit_address_vs_reg): /example-0/fpga-axi@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.example.dts:34.13-54:
Warning (dma_ranges_format): /example-0/memory-controller@2c00000:dma-ranges: "dma-ranges" property has invalid length (24 bytes) (parent #address-cells == 1, child #address-cells == 2, #size-cells == 2)
Documentation/devicetree/bindings/mfd/st,stpmic1.example.dts:19.15-79.11:
Warning (unit_address_vs_reg): /example-0/i2c@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.example.dts:28.23-31.15:
Warning (unit_address_vs_reg): /example-0/mdio@37000000/switch@10: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/rng/brcm,bcm2835.example.dts:17.5-21.11:
Warning (unit_address_vs_reg): /example-0/rng: node has a reg or ranges property, but no unit name
Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.example.dts:20.20-43.11:
Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/usb/ingenic,musb.example.dts:18.28-21.11:
Warning (unit_address_vs_reg): /example-0/usb-phy@0: node has a unit name, but no reg or ranges property
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "Nuno Sá" <nuno.sa@analog.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-hwmon@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-spi@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>