Commit Graph

144 Commits

Author SHA1 Message Date
Mark Brown
f71f26274d Merge remote-tracking branches 'regulator/topic/s2mps11', 'regulator/topic/s2mpu02', 'regulator/topic/s5m8767' and 'regulator/topic/tps65090' into regulator-next 2014-08-05 18:29:27 +01:00
Axel Lin
cad35c3f46 regulator: s2mps11: Update module description and Kconfig to add S2MPU02 support
This driver also supports S2MPU02 now, thus update module description and
Kconfig accordingly.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-25 18:53:23 +01:00
James Ban
1028a37daa regulator: da9211: new regulator driver
This is the driver for the Dialog DA9211 Multi-phase 12A DC-DC Buck
Converter regulator. It communicates via an I2C bus to the device.

Signed-off-by: James Ban <james.ban.opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-07-14 19:15:56 +01:00
Linus Torvalds
312c76f1a3 regulator: Updates for v3.16
The bulk of the changes for this release are a few new drivers however
 there are a couple of noticable core changes and the usual stream of
 cleanups and fixes:
 
  - Move disable of unused regulators later in init so it comes after
    deferred probe has iterated making startup smoother.
  - Fixes reference counting of the DT nodes for constraints from Charles
    Keepax.  This has little practical impact since all real users of
    the regulator bindings use FDT which doesn't need the reference
    counting.
  - Lots of cleanups, especially to the Samsung drivers.
  - Support for Linear Technologies LTC3589, Texas Instruments TPS658640
    and X-Powers AXP20x.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTjaRuAAoJELSic+t+oim96AAP/jNtqLoBLIz6Idwg29Jd3Gj+
 X3R+5NfuS0kccvKvIbHmKygwJ6hY9anBsKQ28AH6VUAgcUqrPnWiRyl4iZAyMSQZ
 bweQ1QSAIxjAD9J+hMSMU65h3pKh7t6k20dumEUOJZ/ZuPmYj5aks3dy+DKSIkF2
 GDG1SVonxheuhUbxEPnXlz5pSnFtERQQMGPdYzk3RxqdeDeVr6Oanlxuo/IKagPP
 vm6BFFutEcSk4KpkEQF+iGxIDTzTFGjMe2TzDu1ubxsxcL+5sNh8rkN9rbqQ0fdo
 fGMZuo9AXEPXNDwY6ug0Mxoqhg0vrf8NSnEWjM6zQJELKH6H4KMhwAGjstCDkFer
 rsuZXeIM1Mk1wrPP6QWLvHVqwS9GUXki82ZgUpDOn61HpRLUu6bKY8eWoq3UM79S
 qiRoNSW7eggI0/71IrzumWWE8HEufEJEgGNAqwFPkBywCg+biXjkHlcXdyBMCpqy
 kUev0QVJb3FHBnyIdMAVm8hrreejh+frl2Nc+aIEhYZxc3idvVqKl1lvjbObt6PM
 FK52n8c/WlQxLZ8+isv0b1+pwT6QHeLzBvBA8mE6+Mn4vLzQKT4nofQU4PSASRSM
 UqkaSMhaaJ4WRXlNdhkp721EbRAltrTwzjMS/7lTTZRyN9g9ODOhDnzRT2f3J8F1
 JYS22jFTL5ywNR6GFcq0
 =JrfM
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into next

Pull regulator updates from Mark Brown:
 "The bulk of the changes for this release are a few new drivers however
  there are a couple of noticable core changes and the usual stream of
  cleanups and fixes:

   - move disable of unused regulators later in init so it comes after
     deferred probe has iterated making startup smoother.
   - fixes to reference counting of the DT nodes for constraints from
     Charles Keepax.  This has little practical impact since all real
     users of the regulator bindings use FDT which doesn't need the
     reference counting.
   - lots of cleanups, especially to the Samsung drivers.
   - support for Linear Technologies LTC3589, Texas Instruments
     TPS658640 and X-Powers AXP20x"

* tag 'regulator-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (64 commits)
  regulator: pbias: remove unnecessary OOM messages
  regulator: max8649: remove unnecessary OOM messages
  regulator: core: Fix the init of DT defined fixed regulators
  regulator: core: Disable unused regulators after deferred probing is done
  regulator: Don't disable unused regulators we don't have permission for
  regulator: axp20x: Use regulator_map_voltage_ascend for LDO4
  regulator: use of_property_read_{bool|u32}()
  regulator: Fix regulator_get_{optional,exclusive}() documentation
  regulators: Add definition of regulator_set_voltage_time() for !CONFIG_REGULATOR
  regulator: arizona-ldo1: add missing #include
  regulator: pfuze100: Support enable/disable for fixed regulator
  regulator: ltc3589: Remove ltc3589_list_voltage_fixed function
  regulator: ltc3589: Fix module dependency
  regulator: tps6586x: Remove unused to_tps6586x_dev() function
  regulator: tps65218: Convert to use regulator_set_voltage_time_sel
  regulator: tps6586x: Add support for the TPS658640
  regulator: tps6586x: Prepare supporting fixed regulators
  regulator: pfuze100: Don't allocate an invalid gpio
  regulator: pfuze100: Support SWB enable/disable
  regulator: fixed: use of_property_read_{bool|u32}()
  ...
2014-06-03 11:44:48 -07:00
Mark Brown
2c7a6a3547 Merge remote-tracking branches 'regulator/topic/fixed', 'regulator/topic/id-const', 'regulator/topic/ltc3589', 'regulator/topic/max8649' and 'regulator/topic/of' into regulator-next 2014-06-02 17:08:05 +01:00
Axel Lin
ac1d686846 regulator: ltc3589: Fix module dependency
Make this driver depend on I2C and select REGMAP_I2C to fix build failure.
Also allows this driver to be built as module.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-27 12:06:32 +01:00
Philipp Zabel
3eb2c7ecb7 regulator: Add LTC3589 support
This patch adds support for the Linear Technology LTC3589, LTC3589-1,
and LTC3589-2 8-output I2C voltage regulator ICs.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-26 15:54:57 +01:00
Krzysztof Kozlowski
8a82b408ac regulator: max14577: Add support for MAX77836 regulators
Add support for MAX77836 chipset and its additional two LDO regulators.
These LDO regulators are controlled by the PMIC block with additional
regmap (different I2C slave address).

The MAX77836 charger and safeout regulators are almost identical to
MAX14577. The registers layout is the same, except values for charger's
current. The patch adds simple mapping between device type and supported
current by the charger regulator.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-23 14:09:45 +01:00
Carlo Caione
dfe7a1b058 regulator: AXP20x: Add support for regulators subsystem
AXP202 and AXP209 come with two synchronous step-down DC-DCs and five
LDOs. This patch introduces basic support for those regulators.

Signed-off-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14 17:00:34 +01:00
Linus Torvalds
97e18dc007 MMC highlights for 3.15:
Core:
  - CONFIG_MMC_UNSAFE_RESUME=y is now default behavior.
  - DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V.
  - Add GPIO descriptor based slot-gpio card detect API.
 
 Drivers:
  - dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c.
  - mmci: Support HW busy detection on ux500.
  - omap: Support MMC_ERASE.
  - omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23.
  - rtsx: Support pre-req/post-req async.
  - sdhci: Add support for Realtek RTS5250 controllers.
  - sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect.
  - sdhci-msm: Add new driver for Qualcomm SDHCI chipset support.
  - sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTRLHLAAoJEHNBYZ7TNxYMoqEQAOULXl1SHt0aHn5I0cfdVnRm
 J3i56MqarwXQOse/qJrg8/uKsggAu0ivTlQ7x1h6bpXmzHqvOtZhSoO9BqGEvxOU
 WNeA9ouaKMx3gCpIAwl9Odox+d2E+91nRfxU3fZTDITy554fREXmIpWiidjFPR7n
 2oHT0yvGuLjunTC8MhxSB0OsggoIDXDTVPxrcf2k+AcAZAMlCMDNirN9+JbhiVM9
 PNESapMyQAbFy18BGzCt5lO2o6aRileaSdX4BFTW4lx2LSPryUVV3cnfIH4zlytW
 joVDWyU5kAtQgfhoEhTsWJld+cwHsMUrl/FOfhMvBWbPMxLJnbFx8b459nKJDM5j
 NUo29KQxxHgWblGYx+F5SYuTloqWtX5iQWsez9g38Z/3UtjHR++o3+auwTFsZFRe
 7EusZqsXdKggx1iiW/5afgb+tFOiCe5WOOQv29YdqWurPhaSK2Nr1aprD4RRiMeT
 IG9qBLhHFLl8Pv0nTdEGbJHhAhihja6w2ul+i/8JSaDOYAGFbEn47MC8JfrKAnpw
 WovxkSqMroMhjI+51cwJnVtdczQWx5kpjqDY0VaJlKvOfcwyOuyTU+s2vrHVDMZS
 a0HgaXeVxr5IcDTz2zo1f6UbM4k2z/Ka0LOOSPqyOYOpFuT6VkXhgOVq6fsRpnaN
 /9CUirULwF5ej0oz38hk
 =6S8w
 -----END PGP SIGNATURE-----

Merge tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.15:

  Core:
   - CONFIG_MMC_UNSAFE_RESUME=y is now default behavior
   - DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V
   - Add GPIO descriptor based slot-gpio card detect API

  Drivers:
   - dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c
   - mmci: Support HW busy detection on ux500
   - omap: Support MMC_ERASE
   - omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23
   - rtsx: Support pre-req/post-req async
   - sdhci: Add support for Realtek RTS5250 controllers
   - sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect
   - sdhci-msm: Add new driver for Qualcomm SDHCI chipset support
   - sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs"

* tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (102 commits)
  mmc: sdhci-acpi: Intel SDIO has broken card detect
  mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller
  mmc: sdhci-msm: Add platform_execute_tuning implementation
  mmc: sdhci-msm: Initial support for Qualcomm chipsets
  mmc: sdhci-msm: Qualcomm SDHCI binding documentation
  sdhci: only reprogram retuning timer when flag is set
  mmc: rename ARCH_BCM to ARCH_BCM_MOBILE
  mmc: sdhci: Allow for irq being shared
  mmc: sdhci-acpi: Add device id 80860F16
  mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14
  mmc: slot-gpio: Add GPIO descriptor based CD GPIO API
  mmc: slot-gpio: Split out CD IRQ request into a separate function
  mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers
  Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform"
  mmc: sdhci-spear: use generic card detection gpio support
  mmc: sdhci-spear: remove support for power gpio
  mmc: sdhci-spear: simplify resource handling
  mmc: sdhci-spear: fix platform_data usage
  mmc: sdhci-spear: fix error handling paths for DT
  mmc: sdhci-bcm-kona: fix build errors when built-in
  ...
2014-04-09 08:39:39 -07:00
Mark Brown
5481b348e8 Merge remote-tracking branches 'regulator/topic/tps65218', 'regulator/topic/tps6524x', 'regulator/topic/tps6586x', 'regulator/topic/tps65910', 'regulator/topic/tps80031', 'regulator/topic/wm831x', 'regulator/topic/wm8350' and 'regulator/topic/wm8994' into regulator-next 2014-03-26 16:58:25 +00:00
Mark Brown
24ee65e4a5 Merge remote-tracking branches 'regulator/topic/s5m8767', 'regulator/topic/st-pwm', 'regulator/topic/ti-abb', 'regulator/topic/tps51632', 'regulator/topic/tps62360', 'regulator/topic/tps6507x', 'regulator/topic/tps65090' and 'regulator/topic/tps65217' into regulator-next 2014-03-26 16:58:18 +00:00
Mark Brown
7b836485d4 Merge remote-tracking branches 'regulator/topic/max8973', 'regulator/topic/max8997', 'regulator/topic/max8998', 'regulator/topic/mc13xxx', 'regulator/topic/pfuze100', 'regulator/topic/rc5t583' and 'regulator/topic/s2mps11' into regulator-next 2014-03-26 16:58:11 +00:00
Lee Jones
4a5d301328 regulator: Add new driver for ST's PWM controlled voltage regulators
On some STMicroelectronics hardware reside regulators consisting
partly of a PWM input connected to the feedback loop. As the PWM
duty-cycle is varied the output voltage adapts. This driver
allows us to vary the output voltage by adapting the PWM input
duty-cycle.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-21 18:20:04 +00:00
Krzysztof Kozlowski
15f77300c9 regulator: s2mps11: Add support for S2MPS14 regulators
Add support for S2MPS14 PMIC regulators to s2mps11 driver. The S2MPS14
has fewer BUCK-s and LDO-s than S2MPS11. It also does not support
controlling the BUCK ramp delay.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-19 13:02:51 +00:00
Sachin Kamat
f187927146 regulator: Add support for S2MPA01 regulator
Add support for S2MPA01 voltage and current regulator.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18 10:56:30 +00:00
Matt Porter
462c9fc5cb regulator: add bcm590xx regulator driver
Add a regulator driver for the BCM590xx PMU voltage regulators.
The driver supports LDOs and DCDCs in normal mode only. There is
no support for low-power mode or power sequencing.

Signed-off-by: Matt Porter <mporter@linaro.org>
Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-11 18:51:42 +00:00
Axel Lin
2cee2121db regulator: pfuze100: Add PFUZE200 support to Kconfig and module description
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-06 12:26:21 +08:00
Balaji T K
11469e0bb1 regulator: add pbias regulator support
pbias register controls internal power supply to sd card i/o pads
in most OMAPs (OMAP2-5, DRA7).
Control bits for selecting voltage level and
enabling/disabling are in the same PBIAS register.

Signed-off-by: Balaji T K <balajitk@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Mark Brown <broonie@linaro.org>
Tested-by: Florian Vaussard <florian.vaussard@epfl.ch>
Tested-by: Stefan Roese <sr@denx.de>
Signed-off-by: Chris Ball <chris@printf.net>
2014-03-04 11:44:47 -05:00
Axel Lin
948838a10a regulator: tps65218: Add OF dependency
This is a DT-only driver, so make it depend on OF and remove of_match_ptr in
the code.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-19 21:18:58 +09:00
Keerthy
90e7d52627 regulator: tps65218: Add Regulator driver for TPS65218 PMIC
This patch adds support for TPS65218 PMIC regulators.

The regulators set consists of 6 DCDCs and 1 LDO. The output
voltages are configurable and are meant to supply power to the
main processor and other components.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-14 20:20:35 +00:00
Linus Torvalds
15333539a9 regulator: Updates for v3.14
A respin of the merges in the previous pull request with one extra fix.
 A quiet release for the regulator API, quite a large number of small
 improvements all over but other than the addition of new drivers for the
 AS3722 and MAX14577 there is nothing of substantial non-local impact.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJS4QTYAAoJELSic+t+oim92bMP/09kMG+4zS6TGM+ljselfYLQ
 XmqEAfLpND+07HmxlCRMHIRdrzMm7QrrW076UT3u6Q/RUi6L7LjXWdFNhm9d7k4V
 l45lvpo8C+bJkmX9Y9+dBPKbY5qnz9Kttpr/8wn0uAz1zhqhCCG2GYp0eV7Qcz7L
 XrBfiWmmeu11ArFtQcVPheGMdjiG2hpxbHqJ4e5nZ8kJ3C31RgfTR2r8xA8xr99H
 LhzuwoKjlsjzIuXUgd2F/i4TqtOkpg69wQocRnOYyyEpd4TnI+q4pk4GiMx4EuH1
 GMZ/XGmd1GuiAa7hXIWOyz7vNe54RPoLTWN8QEaYGXf8m/AUUVbje33BTtWbwEeU
 VXWbKpNEWWzykE6lPtxY9I0KMYbqAUvcflIL7kLYbxLS6RE5U4+dwYVEF0gwAWor
 svwgwXhjzNCJhb+DQlzKQa2zcWwJr0uT+DllPXEXJE5yIIn7cHEraYcS4cPfLNL5
 MLnB9BGX5zJQDJVsex/8jnCafI7M/CefIB06CbLK4klR1OtyTJc3yEhGCgWlJU4C
 NKdUbUhirCkPqY2v4RwWwOaxGs0WFWsyd5gYhCy3gL7O22pGW5yGO3MG524mRWrU
 ccU9lbpXgtHTTcb+RKBEwr9fWEcsCIt5gImcRoMxqfkjY0CsQJD8tVdl4Md7OYYv
 BjJexZZulWce7R3F7+Kf
 =1NsR
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "A respin of the merges in the previous pull request with one extra
  fix.

  A quiet release for the regulator API, quite a large number of small
  improvements all over but other than the addition of new drivers for
  the AS3722 and MAX14577 there is nothing of substantial non-local
  impact"

* tag 'regulator-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (47 commits)
  regulator: pfuze100-regulator: Improve dev_info() message
  regulator: pfuze100-regulator: Fix some checkpatch complaints
  regulator: twl: Fix checkpatch issue
  regulator: core: Fix checkpatch issue
  regulator: anatop-regulator: Remove unneeded memset()
  regulator: s5m8767: Update LDO index in s5m8767-regulator.txt
  regulator: as3722: set enable time for SD0/1/6
  regulator: as3722: detect SD0 low-voltage mode
  regulator: tps62360: Fix up a pointer-integer size mismatch warning
  regulator: anatop-regulator: Remove unneeded kstrdup()
  regulator: act8865: Fix build error when !OF
  regulator: act8865: register all regulators regardless of how many are used
  regulator: wm831x-dcdc: Remove unneeded 'err' label
  regulator: anatop-regulator: Add MODULE_ALIAS()
  regulator: act8865: fix incorrect devm_kzalloc for act8865
  regulator: act8865: Remove set_suspend_[en|dis]able implementation
  regulator: act8865: Remove unneeded regulator_unregister() calls
  regulator: s2mps11: Clean up redundant code
  regulator: tps65910: Simplify setting enable_mask for regulators
  regulator: act8865: add device tree binding doc
  ...
2014-01-25 13:19:10 -08:00
Mark Brown
a2a2be6309 Merge remote-tracking branches 'regulator/topic/db8500', 'regulator/topic/gpio', 'regulator/topic/lp3971', 'regulator/topic/lp3972', 'regulator/topic/max14577', 'regulator/topic/max77693', 'regulator/topic/mc13892', 'regulator/topic/pcf50633' and 'regulator/topic/pfuze100' into regulator-linus 2014-01-23 12:01:27 +00:00
Alexander Shiyan
e5a3da2143 mfd: mc13xxx: Remove useless symbol MFD_MC13783
Symbol MFD_MC13783 always selected by MFD_MC13XXX, so no need
to keep additional symbol.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21 08:28:09 +00:00
Wenyou Yang
33036f48d1 regulator: act8865: add PMIC act8865 driver
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-24 13:47:40 +00:00
Fabio Estevam
1eb72f0b98 regulator: pfuze100: Improve PFUZE100 entry text
Make PFUZE100 entry consistent with other Freescale PMIC entries, so that now
we can have:

	<*>   Freescale MC13783 regulator driver
	<*>   Freescale MC13892 regulator driver
	<*>   Freescale PFUZE100 regulator driver

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Robin Gong <yibin.gong@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-24 12:47:59 +00:00
Krzysztof Kozlowski
b0902bbeb7 regulator: max14577: Add regulator driver for Maxim 14577
MAX14577 chip is a multi-function device which includes MUIC,
charger and voltage regulator. The driver is located in drivers/mfd.

This patch adds regulator driver for MAX14577 chip. There are two
regulators in this chip:
1. Safeout LDO with constant voltage output of 4.9V. It can be only
   enabled or disabled.
2. Current regulator for the charger. It provides current from 90mA up
   to 950mA.
Driver supports Device Tree.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-18 19:23:28 +00:00
Mark Brown
aa11a358f8 Merge remote-tracking branch 'regulator/topic/stw481x' into regulator-next 2013-10-24 11:11:40 +01:00
Mark Brown
aef393da75 Merge remote-tracking branch 'regulator/topic/optional' into regulator-next 2013-10-24 11:11:39 +01:00
Laxman Dewangan
bc407334e9 regulator: as3722: add regulator driver for AMS AS3722
The AMS AS3722 is a compact system PMU suitable for mobile phones,
tablets etc. It has 4 DCDC step down regulators, 3 DCDC step down
controller, 11 LDOs.

Add a driver to support accessing the DCDC/LDOs found on the AMS
AS3722 PMIC using regulators.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Florian Lobmaier <florian.lobmaier@ams.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-20 18:08:00 +01:00
Linus Walleij
3615a34ea1 regulator: add STw481x VMMC driver
The ST Microelectronics STw481x PMIC used for the Nomadik
has one single software-controlled regulator for VMMC.
This driver registers directly to the compatible string
as there is just one regulator.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17 00:45:57 +01:00
Mark Brown
4ddfebd3b0 regulator: core: Provide a dummy regulator with full constraints
When a system has said that it has fully specified constraints for its
regulators it is still possible that some supplies may be missing,
especially if regulator support has been added to a driver after the
board was integrated. We can handle such situations more gracefully by
providing a dummy regulator.

Unless the caller has specifically indicated that the system design may
not include a given regulator by using regulator_get_optional() or that
it needs its interactions to have an effect using regulator_get_exclusive()
provide a dummy regulator if we can't locate a real one.

The kconfig option REGULATOR_DUMMY that provided similar behaviour for all
regulators has been removed, systems that need it should flag that they
have full constraints instead.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17 00:30:25 +01:00
Mark Brown
09f2dd88ff Merge remote-tracking branch 'regulator/topic/pfuze100' into regulator-next 2013-09-01 13:50:18 +01:00
Mark Brown
099c606224 Merge remote-tracking branch 'regulator/topic/kconfig' into regulator-next 2013-09-01 13:50:11 +01:00
Mark Brown
62696579a0 Merge remote-tracking branch 'regulator/topic/da9063' into regulator-next 2013-09-01 13:50:07 +01:00
Axel Lin
613965fb49 regulator: lp872x: Make REGULATOR_LP872X depend on I2C rather than I2C=y
lp872x regulator driver can be built a module after commit 631a1fc
"regulator: build: Allow most regulators to be built as modules".
Make REGULATOR_LP872X depend on I2C to allow building lp872x module when I2C=m.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-30 16:40:26 +01:00
Mark Brown
631a1fc4d4 regulator: build: Allow most regulators to be built as modules
Mostly for testing without bloating the kernel image rather than actual
utility.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29 19:45:29 +01:00
Krystian Garbaciak
69ca3e58d1 regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
 - 11x LDOs (named LDO1 - LDO11),
 - 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),

Regulators provide following operations:
 - REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
 - REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
     - LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
     - buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
       and REGULATOR_MODE_STANDBY,
 - REGULATOR_CHANGE_CURRENT for buck converters (current limits).

The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.

Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.

This driver requires MFD core driver for operation.

Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-29 19:34:59 +01:00
Steve Twiss
16f10918c9 regulator: da9210: New driver
I2C driver for the Dialog DA9210 Multi-phase 12A DC-DC Buck.

Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: David Dajun Chen <david.chen@diasemi.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-06 17:46:15 +01:00
Axel Lin
94421b05d3 regulator: pfuze100: REGULATOR_PFUZE100 needs to select REGMAP_I2C
This fixes below build errors:

  CC [M]  drivers/regulator/pfuze100-regulator.o
drivers/regulator/pfuze100-regulator.c:342:21: error: variable 'pfuze_regmap_config' has initializer but incomplete type
drivers/regulator/pfuze100-regulator.c:343:2: error: unknown field 'reg_bits' specified in initializer
drivers/regulator/pfuze100-regulator.c:343:2: warning: excess elements in struct initializer [enabled by default]
drivers/regulator/pfuze100-regulator.c:343:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
drivers/regulator/pfuze100-regulator.c:344:2: error: unknown field 'val_bits' specified in initializer
drivers/regulator/pfuze100-regulator.c:344:2: warning: excess elements in struct initializer [enabled by default]
drivers/regulator/pfuze100-regulator.c:344:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
drivers/regulator/pfuze100-regulator.c:345:2: error: unknown field 'max_register' specified in initializer
drivers/regulator/pfuze100-regulator.c:345:2: warning: excess elements in struct initializer [enabled by default]
drivers/regulator/pfuze100-regulator.c:345:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
drivers/regulator/pfuze100-regulator.c:346:2: error: unknown field 'cache_type' specified in initializer
drivers/regulator/pfuze100-regulator.c:346:2: warning: excess elements in struct initializer [enabled by default]
drivers/regulator/pfuze100-regulator.c:346:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
drivers/regulator/pfuze100-regulator.c: In function 'pfuze100_regulator_probe':
drivers/regulator/pfuze100-regulator.c:370:2: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration]
drivers/regulator/pfuze100-regulator.c:370:21: warning: assignment makes pointer from integer without a cast [enabled by default]
cc1: some warnings being treated as errors
make[2]: *** [drivers/regulator/pfuze100-regulator.o] Error 1
make[1]: *** [drivers/regulator] Error 2
make: *** [drivers] Error 2

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 06:49:56 +01:00
Robin Gong
3784b6d64d regulator: pfuze100: add pfuze100 regulator driver
Add pfuze100 regulator driver.

Signed-off-by: Robin Gong <b38343@freescale.com>
Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-25 10:34:34 +01:00
Axel Lin
7c45f60b42 regulator: 88pm800: Depend on MFD_88PM800 rather than MFD_88PM800=y
This driver can be built as a module, make it depend on MFD_88PM800.
Otherwise, we are not able to select this driver when MFD_88PM800=m.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-19 19:08:37 +01:00
Chao Xie
95f1dc08c6 regulator: 88pm800: add regulator driver for 88pm800
Add the regulator driver for PMIC 88pm800 including device tree
support.
88pm800 is an I2C-based power-management IC containing voltage
regulators, a real-time clock, and some general purpose ADC devices,

Signed-off-by: Yi Zhang <yizhang@marvell.com>
Signed-off-by: Chao Xie <chao.xie@marvell.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-19 19:08:36 +01:00
Mark Brown
82b736df4d regulator: build: Sort Kconfig
Reduces merge issues if nothing else.

Signed-off-by: Mark Brown <broonie@kernel.org>
2013-07-18 14:22:33 +01:00
Mark Brown
59aedb6df1 Merge remote-tracking branch 'regulator/topic/abb' into regulator-next 2013-07-01 11:17:06 +01:00
Jonghwa Lee
80b022e29b regulator: max77693: Add max77693 regualtor driver.
This patch adds new regulator driver to support max77693 chip's regulators.
max77693 has two linear voltage regulators and one current regulator which
can be controlled through I2C bus. This driver also supports device tree.

Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-25 11:31:29 +01:00
Andrii.Tseglytskyi
40b1936efe regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver
Adaptive Body Biasing (ABB) modulates transistor bias voltages
dynamically in order to optimize switching speed versus leakage.

Texas Instruments' SmartReflex 2 technology provides support for this
power management technique with Forward Body Biasing (FBB) and Reverse
Body Biasing (RBB). These modulate the body voltage of transistor
cells or blocks dynamically to gain performance and reduce leakage.
TI's SmartReflex white paper[1] has further information for usage in
conjunction with other power management techniques.

The application of FBB/RBB technique is determined for each unique
device in some process nodes, whereas, they are mandated on other
process nodes.

In a nutshell, ABB technique is implemented on TI SoC as an on-chip
LDO which has ABB module controlling the bias voltage. However, the
voltage is unique per device. These vary per SoC family and the manner
in which these techniques are used may vary depending on the Operating
Performance Point (OPP) voltage targeted. For example:
OMAP3630/OMAP4430: certain OPPs mandate usage of FBB independent of
	devices.
OMAP4460/OMAP4470: certain OPPs mandate usage of FBB, while others may
	optionally use FBB or optimization with RBB.
OMAP5: ALL OPPs may optionally use ABB, and ABB biasing voltage is
	influenced by vset fused in s/w and requiring s/w override of
	default values.

Further, two generations of ABB module are used in various TI SoCs.
They have remained mostly register field compatible, however the
register offset had switched between versions.

We introduce ABB LDO support in the form of a regulator which is
controlled by voltages denoting the desired Operating Performance
Point which is targeted. However, since ABB transition is part of OPP
change sequence, the sequencing required to ensure sane operation
w.r.t OPP change is left to the controlling driver (example: cpufreq
SoC driver) using standard regulator operations.

The driver supports all ABB modes and ability to override ABB LDO vset
control efuse based ABB mode detection etc.

Current implementation is heavily influenced by the original patch
series [2][3] from Mike Turquette. However, the current implementation
supports only device tree based information.

[1] http://www.ti.com/pdfs/wtbu/smartreflex_whitepaper.pdf
[2] http://marc.info/?l=linux-omap&m=134931341818379&w=2
[3] http://marc.info/?l=linux-arm-kernel&m=134931402406853&w=2

[nm@ti.com: co-developer]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-05-12 18:31:36 +04:00
Alexandre Courbot
76ec9d18b8 Convert selectors of GENERIC_GPIO to GPIOLIB
GENERIC_GPIO is now equivalent to GPIOLIB and features that depended on
GENERIC_GPIO can now depend on GPIOLIB to allow removal of this option.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-16 18:47:14 +09:00
Mark Brown
800d290182 Merge remote-tracking branch 'regulator/topic/lp8755' into regulator-next 2013-02-19 12:42:46 +00:00
Mark Brown
e6ed90581b regulator: arizona-micsupp: Enable SYSCLK for charge pump
If we are in non-bypass mode then the SYSCLK is required for full charge
pump operation, otherwise we will fall back to bypass mode. Use the DAPM
context exposed by the ASoC driver to manage this.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-13 21:31:02 +09:00