Remove the "struct mtk_smi_iommu" to simplify the code since it has only
one item in it right now.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The "mediatek,larb-id" has already been parsed in MTK IOMMU driver.
It's no need to parse it again in SMI driver. Only clean some codes.
This patch is fit for all the current mt2701, mt2712, mt7623, mt8173
and mt8183.
After this patch, the "mediatek,larb-id" only be needed for mt2712
which have 2 M4Us. In the other SoCs, we can get the larb-id from M4U
in which the larbs in the "mediatek,larbs" always are ordered.
Correspondingly, the larb_nr in the "struct mtk_smi_iommu" could also
be deleted.
CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There are 2 mmu cells in a M4U HW. we could adjust some larbs entering
mmu0 or mmu1 to balance the bandwidth via the smi-common register
SMI_BUS_SEL(0x220)(Each larb occupy 2 bits).
In mt8183, For better performance, we switch larb1/2/5/7 to enter
mmu1 while the others still keep enter mmu0.
In mt8173 and mt2712, we don't get the performance issue,
Keep its default value(0x0), that means all the larbs enter mmu0.
Note: smi gen1(mt2701/mt7623) don't have this bus_sel.
And, the base of smi-common is completely different with smi_ao_base
of gen1, thus I add new variable for that.
CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch only move the clk_prepare_enable and config_port into the
runtime suspend/resume callback. It doesn't change the code content
and sequence.
This is a preparing patch for adjusting SMI_BUS_SEL for mt8183.
(SMI_BUS_SEL need to be restored after smi-common resume every time.)
Also it gives a chance to get rid of mtk_smi_larb_get/put which could
be a next topic.
CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The M4U IP blocks in mt8183 is MediaTek's generation2 M4U which use
the ARM Short-descriptor like mt8173, and most of the HW registers
are the same.
Here list main differences between mt8183 and mt8173/mt2712:
1) mt8183 has only one M4U HW like mt8173 while mt2712 has two.
2) mt8183 don't have the "bclk" clock, it use the EMI clock instead.
3) mt8183 can support the dram over 4GB, but it doesn't call this "4GB
mode".
4) mt8183 pgtable base register(0x0) extend bit[1:0] which represent
the bit[33:32] in the physical address of the pgtable base, But the
standard ttbr0[1] means the S bit which is enabled defaultly, Hence,
we add a mask.
5) mt8183 HW has a GALS modules, SMI should enable "has_gals" support.
6) mt8183 need reset_axi like mt8173.
7) the larb-id in smi-common is remapped. M4U should add its larbid_remap.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In some SoCs like mt8183, SMI add GALS(Global Async Local Sync) module
which can help synchronize for the modules in different clock frequency.
It can be seen as a "asynchronous fifo". This is a example diagram:
M4U
|
----------
| |
gals0-rx gals1-rx
| |
| |
gals0-tx gals1-tx
| |
------------
SMI Common
------------
|
+-----+--------+-----+- ...
| | | |
| gals-rx gals-rx |
| | | |
| | | |
| gals-tx gals-tx |
| | | |
larb1 larb2 larb3 larb4
GALS only help transfer the command/data while it doesn't have the
configuring register, thus it has the special "smi" clock and doesn't
have the "apb" clock. From the diagram above, we add "gals0" and
"gals1" clocks for smi-common and add a "gals" clock for smi-larb.
This patch adds gals clock supporting in the SMI. Note that some larbs
may still don't have the "gals" clock like larb1 and larb4 above.
This is also a preparing patch for mt8183 which has GALS.
CC: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use a struct as the platform special data instead of the enumeration.
Also there is a minor change that moving the position of
"enum mtk_smi_gen" definition, this is because we expect define
"struct mtk_smi_common_plat" before it is referred.
This is a preparing patch for mt8183.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The config_port of mt2712 and mt8183 are the same. Use a general
config_port interface instead.
In addition, in mt2712, larb8 and larb9 are the bdpsys larbs which
are not the normal larb, their register space are different from the
normal one. thus, we can not call the general config_port. In mt8183,
IPU0/1 and CCU connect with smi-common directly, they also are not
the normal larb. Hence, we add a "larb_direct_to_common_mask" for these
larbs which connect to smi-commmon directly.
This is also a preparing patch for adding mt8183 SMI support.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initialization of MediaTek power manager(SCPSYS) is
builtin_platform_driver, and SMI must depend on power-domain.
Thus, currently subsys_initcall for SMI is unnecessary, SMI will be
always probe defered by power-domain. Degrade it to module_init.
In addition, there are two small changes about the probe sequence:
1) Delete this two lines.
if (!dev->pm_domain)
return -EPROBE_DEFER;
This is not helpful. the platform driver framework guarantee this.
The "dev_pm_domain_attach" in the "platform_drv_probe" will return
EPROBE_DEFER if its powerdomain is not ready.
2) Add the probe-defer for the smi-larb device should waiting for
smi-common.
In mt2712, there are 2 smi-commons, 10 smi-larbs. All will be
probe-defered by the power-domain, there is seldom case that
smi-larb probe done before smi-common. then it will hang like
this:
Unable to handle kernel NULL pointer dereference at virtual address
00000000 pgd = ffffff800a4e0000
[00000000] *pgd=00000000beffe003[ 17.610026] , *pud=00000000beffe003
...
[<ffffff800897fe04>] mtk_smi_enable+0x1c/0xd0
[<ffffff800897fee8>] mtk_smi_larb_get+0x30/0x98
[<ffffff80088edfa8>] mtk_mipicsi0_resume+0x38/0x1b8
[<ffffff8008634f44>] pm_generic_runtime_resume+0x3c/0x58
[<ffffff8008644ff8>] __genpd_runtime_resume+0x38/0x98
[<ffffff8008647434>] genpd_runtime_resume+0x164/0x220
[<ffffff80086372f8>] __rpm_callback+0x78/0xa0
[<ffffff8008637358>] rpm_callback+0x38/0xa0
[<ffffff8008638a4c>] rpm_resume+0x4a4/0x6f8
[<ffffff8008638d04>] __pm_runtime_resume+0x64/0xa0
[<ffffff80088ed05c>] mtk_mipicsi0_probe+0x40c/0xb70
[<ffffff800862cdc0>] platform_drv_probe+0x58/0xc0
[<ffffff800862a514>] driver_probe_device+0x284/0x438
[<ffffff800862a8ac>] __device_attach_driver+0xb4/0x160
[<ffffff8008627d58>] bus_for_each_drv+0x68/0xa8
[<ffffff800862a0a4>] __device_attach+0xd4/0x168
[<ffffff800862a9d4>] device_initial_probe+0x24/0x30
[<ffffff80086291d8>] bus_probe_device+0xa0/0xa8
[<ffffff8008629784>] deferred_probe_work_func+0x94/0xf0
[<ffffff80080f03a8>] process_one_work+0x1d8/0x6e0
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The M4U IP blocks in mt2712 is MTK's generation2 M4U which use the
ARM Short-descriptor like mt8173, and most of the HW registers are
the same.
The difference is that there are 2 M4U HWs in mt2712 while there's
only one in mt8173. The purpose of 2 M4U HWs is for balance the
bandwidth.
Normally if there are 2 M4U HWs, there should be 2 iommu domains,
each M4U has a iommu domain.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
clk_prepare_enable() can fail here and we must check its return value.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In the commit 3c8f4ad85c ("memory/mediatek: add support for mt2701"),
the larb->larbid was added but not initialized.
Mediatek's gen1 smi need this hardware larbid information to get the
register offset which controls whether enable iommu for this larb.
This patch add the initialize routine for larbid.
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Mediatek SMI has two generations of HW architecture, mt8173 uses the
second generation of SMI HW while mt2701 uses the first generation
HW of SMI.
There's slight differences between the two generations, for generation 2,
the register which control the iommu port access PA or IOVA is at each
larb's register base. But for generation 1, the register is at smi ao
base(smi always on register base).
Besides that, the smi async clock should be prepared and enabled for SMI
generation 1 HW to transform the smi clock into emi clock domain, but is
not needed for SMI generation 2.
This patch add SMI driver for mt2701 which use generation 1 SMI HW.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To allow building mediatek-drm.ko as a module, the
mtk_smi_larb_get and mtk_smi_larb_put symbols have
to be exported.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch add SMI(Smart Multimedia Interface) driver. This driver
is responsible to enable/disable iommu and control the power domain
and clocks of each local arbiter.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
