If an directory has the a casefold flag set without the casefold
feature set, s_encoding will not be initialized, and this will cause
the kernel to dereference a NULL pointer. In addition to adding
checks to avoid these kernel oops, attempts to load inodes with the
casefold flag when the casefold feature is not enable will cause the
file system to be declared corrupted.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Functions such as ext4_dirent_csum_verify() and ext4_dirent_csum_set()
don't actually operate on a directory entry, but a directory block.
And while they take a struct ext4_dir_entry *dirent as an argument, it
had better be the first directory at the beginning of the direct
block, or things will go very wrong.
Rename the following functions so that things make more sense, and
remove a lot of confusing casts along the way:
ext4_dirent_csum_verify -> ext4_dirblock_csum_verify
ext4_dirent_csum_set -> ext4_dirblock_csum_set
ext4_dirent_csum -> ext4_dirblock_csum
ext4_handle_dirty_dirent_node -> ext4_handle_dirty_dirblock
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The largedir feature was intended to allow ext4 directories to have
unmapped directory blocks (e.g., directory holes). And so the
released e2fsprogs no longer enforces this for largedir file systems;
however, the corresponding change to the kernel-side code was not made.
This commit fixes this oversight.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Temporarily cache a casefolded version of the file name under lookup in
ext4_filename, to avoid repeatedly casefolding it. I got up to 30%
speedup on lookups of large directories (>100k entries), depending on
the length of the string under lookup.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Found by visual inspection, this wasn't caught by my xfstest, since it's
effect is ignoring positive dentries in the cache the fallback just goes
to the disk. it was introduced in the last iteration of the
case-insensitive patch.
d_compare should return 0 when the entries match, so make sure we are
correctly comparing the entire string if the encoding feature is set and
we are on a case-INsensitive directory.
Fixes: b886ee3e77 ("ext4: Support case-insensitive file name lookups")
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch implements the actual support for case-insensitive file name
lookups in ext4, based on the feature bit and the encoding stored in the
superblock.
A filesystem that has the casefold feature set is able to configure
directories with the +F (EXT4_CASEFOLD_FL) attribute, enabling lookups
to succeed in that directory in a case-insensitive fashion, i.e: match
a directory entry even if the name used by userspace is not a byte per
byte match with the disk name, but is an equivalent case-insensitive
version of the Unicode string. This operation is called a
case-insensitive file name lookup.
The feature is configured as an inode attribute applied to directories
and inherited by its children. This attribute can only be enabled on
empty directories for filesystems that support the encoding feature,
thus preventing collision of file names that only differ by case.
* dcache handling:
For a +F directory, Ext4 only stores the first equivalent name dentry
used in the dcache. This is done to prevent unintentional duplication of
dentries in the dcache, while also allowing the VFS code to quickly find
the right entry in the cache despite which equivalent string was used in
a previous lookup, without having to resort to ->lookup().
d_hash() of casefolded directories is implemented as the hash of the
casefolded string, such that we always have a well-known bucket for all
the equivalencies of the same string. d_compare() uses the
utf8_strncasecmp() infrastructure, which handles the comparison of
equivalent, same case, names as well.
For now, negative lookups are not inserted in the dcache, since they
would need to be invalidated anyway, because we can't trust missing file
dentries. This is bad for performance but requires some leveraging of
the vfs layer to fix. We can live without that for now, and so does
everyone else.
* on-disk data:
Despite using a specific version of the name as the internal
representation within the dcache, the name stored and fetched from the
disk is a byte-per-byte match with what the user requested, making this
implementation 'name-preserving'. i.e. no actual information is lost
when writing to storage.
DX is supported by modifying the hashes used in +F directories to make
them case/encoding-aware. The new disk hashes are calculated as the
hash of the full casefolded string, instead of the string directly.
This allows us to efficiently search for file names in the htree without
requiring the user to provide an exact name.
* Dealing with invalid sequences:
By default, when a invalid UTF-8 sequence is identified, ext4 will treat
it as an opaque byte sequence, ignoring the encoding and reverting to
the old behavior for that unique file. This means that case-insensitive
file name lookup will not work only for that file. An optional bit can
be set in the superblock telling the filesystem code and userspace tools
to enforce the encoding. When that optional bit is set, any attempt to
create a file name using an invalid UTF-8 sequence will fail and return
an error to userspace.
* Normalization algorithm:
The UTF-8 algorithms used to compare strings in ext4 is implemented
lives in fs/unicode, and is based on a previous version developed by
SGI. It implements the Canonical decomposition (NFD) algorithm
described by the Unicode specification 12.1, or higher, combined with
the elimination of ignorable code points (NFDi) and full
case-folding (CF) as documented in fs/unicode/utf8_norm.c.
NFD seems to be the best normalization method for EXT4 because:
- It has a lower cost than NFC/NFKC (which requires
decomposing to NFD as an intermediary step)
- It doesn't eliminate important semantic meaning like
compatibility decompositions.
Although:
- This implementation is not completely linguistic accurate, because
different languages have conflicting rules, which would require the
specialization of the filesystem to a given locale, which brings all
sorts of problems for removable media and for users who use more than
one language.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In order to have a common code base for fscrypt "post read" processing
for all filesystems which support encryption, this commit removes
filesystem specific build config option (e.g. CONFIG_EXT4_FS_ENCRYPTION)
and replaces it with a build option (i.e. CONFIG_FS_ENCRYPTION) whose
value affects all the filesystems making use of fscrypt.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
This commit removes the ext4 specific ext4_encrypted_inode() and makes
use of the generic IS_ENCRYPTED() macro to check for the encryption
status of an inode.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
A specially crafted file system can trick empty_inline_dir() into
reading past the last valid entry in a inline directory, and then run
into the end of xattr marker. This will trigger a divide by zero
fault. Fix this by using the size of the inline directory instead of
dir->i_size.
Also clean up error reporting in __ext4_check_dir_entry so that the
message is clearer and more understandable --- and avoids the division
by zero trap if the size passed in is zero. (I'm not sure why we
coded it that way in the first place; printing offset % size is
actually more confusing and less useful.)
https://bugzilla.kernel.org/show_bug.cgi?id=200933
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Wen Xu <wen.xu@gatech.edu>
Cc: stable@vger.kernel.org
A malicious user could force the directory pointer to be in an invalid
spot by using seekdir(2). Use the mechanism we already have to notice
if the directory has changed since the last time we called
ext4_readdir() to force a revalidation of the pointer.
Reported-by: syzbot+1236ce66f79263e8a862@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
The function inode_cmp_iversion{+raw} is counter-intuitive, because it
returns true when the counters are different and false when these are equal.
Rename it to inode_eq_iversion{+raw}, which will returns true when
the counters are equal and false otherwise.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the specification of data structures by pointer dereferences
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Several filename crypto functions: fname_decrypt(),
fscrypt_fname_disk_to_usr(), and fscrypt_fname_usr_to_disk(), returned
the output length on success or -errno on failure. However, the output
length was redundant with the value written to 'oname->len'. It is also
potentially error-prone to make callers have to check for '< 0' instead
of '!= 0'.
Therefore, make these functions return 0 instead of a length, and make
the callers who cared about the return value being a length use
'oname->len' instead. For consistency also make other callers check for
a nonzero result rather than a negative result.
This change also fixes the inconsistency of fname_encrypt() actually
already returning 0 on success, not a length like the other filename
crypto functions and as documented in its function comment.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch removes the most parts of internal crypto codes.
And then, it modifies and adds some ext4-specific crypt codes to use the generic
facility.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
after a crash and a potential BUG_ON crash if a file has the data
journalling flag enabled while it has dirty delayed allocation blocks
that haven't been written yet. Also fix a potential crash in the new
project quota code and a maliciously corrupted file system.
In addition, fix some DAX-specific bugs, including when there is a
transient ENOSPC situation and races between writes via direct I/O and
an mmap'ed segment that could lead to lost I/O.
Finally the usual set of miscellaneous cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXQ40fAAoJEPL5WVaVDYGjnwMH+wXHASgPfzZgtRInsTG8W/2L
jsmAcMlyMAYIATWMppNtPIq0td49z1dYO0YkKhtPVMwfzu230IFWhGWp93WqP9ve
XYHMmaBorFlMAzWgMKn1K0ExWZlV+ammmcTKgU0kU4qyZp0G/NnMtlXIkSNv2amI
9Mn6R+v97c20gn8e9HWP/IVWkgPr+WBtEXaSGjC7dL6yI8hL+rJMqN82D76oU5ea
vtwzrna/ISijy+etYmQzqHNYNaBKf40+B5HxQZw/Ta3FSHofBwXAyLaeEAr260Mf
V3Eg2NDcKQxiZ3adBzIUvrRnrJV381OmHoguo8Frs8YHTTRiZ0T/s7FGr2Q0NYE=
=7yIM
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Fix a number of bugs, most notably a potential stale data exposure
after a crash and a potential BUG_ON crash if a file has the data
journalling flag enabled while it has dirty delayed allocation blocks
that haven't been written yet. Also fix a potential crash in the new
project quota code and a maliciously corrupted file system.
In addition, fix some DAX-specific bugs, including when there is a
transient ENOSPC situation and races between writes via direct I/O and
an mmap'ed segment that could lead to lost I/O.
Finally the usual set of miscellaneous cleanups"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
ext4: pre-zero allocated blocks for DAX IO
ext4: refactor direct IO code
ext4: fix race in transient ENOSPC detection
ext4: handle transient ENOSPC properly for DAX
dax: call get_blocks() with create == 1 for write faults to unwritten extents
ext4: remove unmeetable inconsisteny check from ext4_find_extent()
jbd2: remove excess descriptions for handle_s
ext4: remove unnecessary bio get/put
ext4: silence UBSAN in ext4_mb_init()
ext4: address UBSAN warning in mb_find_order_for_block()
ext4: fix oops on corrupted filesystem
ext4: fix check of dqget() return value in ext4_ioctl_setproject()
ext4: clean up error handling when orphan list is corrupted
ext4: fix hang when processing corrupted orphaned inode list
ext4: remove trailing \n from ext4_warning/ext4_error calls
ext4: fix races between changing inode journal mode and ext4_writepages
ext4: handle unwritten or delalloc buffers before enabling data journaling
ext4: fix jbd2 handle extension in ext4_ext_truncate_extend_restart()
ext4: do not ask jbd2 to write data for delalloc buffers
jbd2: add support for avoiding data writes during transaction commits
...
If a directory has a large number of empty blocks, iterating over all
of them can take a long time, leading to scheduler warnings and users
getting irritated when they can't kill a process in the middle of one
of these long-running readdir operations. Fix this by adding checks to
ext4_readdir() and ext4_htree_fill_tree().
This was reverted earlier due to a typo in the original commit where I
experimented with using signal_pending() instead of
fatal_signal_pending(). The test was in the wrong place if we were
going to return signal_pending() since we would end up returning
duplicant entries. See 9f2394c9be for a more detailed explanation.
Added fix as suggested by Linus to check for signal_pending() in
in the filldir() functions.
Reported-by: Benjamin LaHaise <bcrl@kvack.org>
Google-Bug-Id: 27880676
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This reverts commit 1028b55baf.
It's broken: it makes ext4 return an error at an invalid point, causing
the readdir wrappers to write the the position of the last successful
directory entry into the position field, which means that the next
readdir will now return that last successful entry _again_.
You can only return fatal errors (that terminate the readdir directory
walk) from within the filesystem readdir functions, the "normal" errors
(that happen when the readdir buffer fills up, for example) happen in
the iterorator where we know the position of the actual failing entry.
I do have a very different patch that does the "signal_pending()"
handling inside the iterator function where it is allowable, but while
that one passes all the sanity checks, I screwed up something like four
times while emailing it out, so I'm not going to commit it today.
So my track record is not good enough, and the stars will have to align
better before that one gets committed. And it would be good to get some
review too, of course, since celestial alignments are always an iffy
debugging model.
IOW, let's just revert the commit that caused the problem for now.
Reported-by: Greg Thelen <gthelen@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(badly behaved) dentry code in various file systems. These have been
reviewed by Al and the respective file system mtinainers and are going
through the ext4 tree for convenience.
This also has a few ext4 encryption bug fixes that were discovered in
Android testing (yes, we will need to get these sync'ed up with the
fs/crypto code; I'll take care of that). It also has some bug fixes
and a change to ignore the legacy quota options to allow for xfstests
regression testing of ext4's internal quota feature and to be more
consistent with how xfs handles this case.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJXBn4aAAoJEPL5WVaVDYGjHWgH/2wXnlQnC2ndJhblBWtPzprz
OQW4dawdnhxqbTEGUqWe942tZivSb/liu/lF+urCGbWsbgz9jNOCmEAg7JPwlccY
mjzwDvtVq5U4d2rP+JDWXLy/Gi8XgUclhbQDWFVIIIea6fS7IuFWqoVBR+HPMhra
9tEygpiy5lNtJA/hqq3/z9x0AywAjwrYR491CuWreo2Uu1aeKg0YZsiDsuAcGioN
Waa2TgbC/ZZyJuJcPBP8If+VOFAa0ea3F+C/o7Tb9bOqwuz0qSTcaMRgt6eQ2KUt
P4b9Ecp1XLjJTC7IYOknUOScY3lCyREx/Xya9oGZfFNTSHzbOlLBoplCr3aUpYQ=
=/HHR
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"These changes contains a fix for overlayfs interacting with some
(badly behaved) dentry code in various file systems. These have been
reviewed by Al and the respective file system mtinainers and are going
through the ext4 tree for convenience.
This also has a few ext4 encryption bug fixes that were discovered in
Android testing (yes, we will need to get these sync'ed up with the
fs/crypto code; I'll take care of that). It also has some bug fixes
and a change to ignore the legacy quota options to allow for xfstests
regression testing of ext4's internal quota feature and to be more
consistent with how xfs handles this case"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: ignore quota mount options if the quota feature is enabled
ext4 crypto: fix some error handling
ext4: avoid calling dquot_get_next_id() if quota is not enabled
ext4: retry block allocation for failed DIO and DAX writes
ext4: add lockdep annotations for i_data_sem
ext4: allow readdir()'s of large empty directories to be interrupted
btrfs: fix crash/invalid memory access on fsync when using overlayfs
ext4 crypto: use dget_parent() in ext4_d_revalidate()
ext4: use file_dentry()
ext4: use dget_parent() in ext4_file_open()
nfs: use file_dentry()
fs: add file_dentry()
ext4 crypto: don't let data integrity writebacks fail with ENOMEM
ext4: check if in-inode xattr is corrupted in ext4_expand_extra_isize_ea()
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a directory has a large number of empty blocks, iterating over all
of them can take a long time, leading to scheduler warnings and users
getting irritated when they can't kill a process in the middle of one
of these long-running readdir operations. Fix this by adding checks to
ext4_readdir() and ext4_htree_fill_tree().
Reported-by: Benjamin LaHaise <bcrl@kvack.org>
Google-Bug-Id: 27880676
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4 treats directory offsets differently for 32-bit and 64-bit callers.
Check the caller type using in_compat_syscall, not is_compat_task. This
changes behavior on SPARC slightly.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a validation check for dentries for encrypted directory to make
sure we're not caching stale data after a key has been added or removed.
Also check to make sure that status of the encryption key is updated
when readdir(2) is executed.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Create separate predicate functions to test/set/clear feature flags,
thereby replacing the wordy old macros. Furthermore, clean out the
places where we open-coded feature tests.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Instead of overloading EIO for CRC errors and corrupt structures,
return the same error codes that XFS returns for the same issues.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As suggested by Herbert Xu, we shouldn't allocate a new tfm each time
we read or write a page. Instead we can use a single tfm hanging off
the inode's crypt_info structure for all of our encryption needs for
that inode, since the tfm can be used by multiple crypto requests in
parallel.
Also use cmpxchg() to avoid races that could result in crypt_info
structure getting doubly allocated or doubly freed.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This is a pretty massive patch which does a number of different things:
1) The per-inode encryption information is now stored in an allocated
data structure, ext4_crypt_info, instead of directly in the node.
This reduces the size usage of an in-memory inode when it is not
using encryption.
2) We drop the ext4_fname_crypto_ctx entirely, and use the per-inode
encryption structure instead. This remove an unnecessary memory
allocation and free for the fname_crypto_ctx as well as allowing us
to reuse the ctfm in a directory for multiple lookups and file
creations.
3) We also cache the inode's policy information in the ext4_crypt_info
structure so we don't have to continually read it out of the
extended attributes.
4) We now keep the keyring key in the inode's encryption structure
instead of releasing it after we are done using it to derive the
per-inode key. This allows us to test to see if the key has been
revoked; if it has, we prevent the use of the derived key and free
it.
5) When an inode is released (or when the derived key is freed), we
will use memset_explicit() to zero out the derived key, so it's not
left hanging around in memory. This implies that when a user logs
out, it is important to first revoke the key, and then unlink it,
and then finally, to use "echo 3 > /proc/sys/vm/drop_caches" to
release any decrypted pages and dcache entries from the system
caches.
6) All this, and we also shrink the number of lines of code by around
100. :-)
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Avoid using SHA-1 when calculating the user-visible filename when the
encryption key is available, and avoid decrypting lots of filenames
when searching for a directory entry in a directory block.
Change-Id: If4655f144784978ba0305b597bfa1c8d7bb69e63
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For encrypted directories, we need to pass in a separate parameter for
the decrypted filename, since the directory entry contains the
encrypted filename.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove unused header files and header files which are included in
ext4.h.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Before converting an inline directory to a regular directory, check
the directory entries to make sure they're not obviously broken.
This helps us to avoid a BUG_ON if one of the dirents is trashed.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Remove local variable "stored" from ext4_readdir(...). This variable
gets initialized but is never used inside the function.
Signed-off-by: Giedrius Rekasius <giedrius.rekasius@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Use rbtree_postorder_for_each_entry_safe() to destroy the rbtree instead
of opencoding an alternate postorder iteration that modifies the tree
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Michel Lespinasse <walken@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zach reported a problem that if inline data is enabled, we don't
tell the difference between the offset of '.' and '..'. And a
getdents will fail if the user only want to get '.' and what's worse,
if there is a conversion happens when the user calls getdents
many times, he/she may get the same entry twice.
In theory, a dir block would also fail if it is converted to a
hashed-index based dir since f_pos will become a hash value, not the
real one, but it doesn't happen. And a deep investigation shows that
we uses a hash based solution even for a normal dir if the dir_index
feature is enabled.
So this patch just adds a new htree_inlinedir_to_tree for inline dir,
and if we find that the hash index is supported, we will do like what
we do for a dir block.
Reported-by: Zach Brown <zab@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
extent cache's slab shrinker which can cause significant, user-visible
pauses when the system is under memory pressure.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=+vcC
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bug fixes from Ted Ts'o:
"Various bug fixes for ext4. The most important is a fix for the new
extent cache's slab shrinker which can cause significant, user-visible
pauses when the system is under memory pressure."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: enable quotas before orphan cleanup
ext4: don't allow quota mount options when quota feature enabled
ext4: fix a warning from sparse check for ext4_dir_llseek
ext4: convert number of blocks to clusters properly
ext4: fix possible memory leak in ext4_remount()
jbd2: fix ERR_PTR dereference in jbd2__journal_start
ext4: use percpu counter for extent cache count
ext4: optimize ext4_es_shrink()
ext4_dir_llseek is only used as a callback function, and no one calls
it directly. So make it as a static function in order to remove a
warning message from sparse check.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Pull vfs pile (part one) from Al Viro:
"Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
locking violations, etc.
The most visible changes here are death of FS_REVAL_DOT (replaced with
"has ->d_weak_revalidate()") and a new helper getting from struct file
to inode. Some bits of preparation to xattr method interface changes.
Misc patches by various people sent this cycle *and* ocfs2 fixes from
several cycles ago that should've been upstream right then.
PS: the next vfs pile will be xattr stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
saner proc_get_inode() calling conventions
proc: avoid extra pde_put() in proc_fill_super()
fs: change return values from -EACCES to -EPERM
fs/exec.c: make bprm_mm_init() static
ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
ocfs2: fix possible use-after-free with AIO
ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
target: writev() on single-element vector is pointless
export kernel_write(), convert open-coded instances
fs: encode_fh: return FILEID_INVALID if invalid fid_type
kill f_vfsmnt
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
nfsd: handle vfs_getattr errors in acl protocol
switch vfs_getattr() to struct path
default SET_PERSONALITY() in linux/elf.h
ceph: prepopulate inodes only when request is aborted
d_hash_and_lookup(): export, switch open-coded instances
9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
9p: split dropping the acls from v9fs_set_create_acl()
...
Commit b0336e8d (ext4: calculate and verify checksums of directory
leaf blocks) and commit dbe89444 (ext4: Calculate and verify checksums
for htree nodes) forget to release buffer when checksum failed, at
some places.
Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
