mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 17:36:25 +07:00
99c0fd5e51
126 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Vlastimil Babka
|
99c0fd5e51 |
mm, compaction: skip buddy pages by their order in the migrate scanner
The migration scanner skips PageBuddy pages, but does not consider their order as checking page_order() is generally unsafe without holding the zone->lock, and acquiring the lock just for the check wouldn't be a good tradeoff. Still, this could avoid some iterations over the rest of the buddy page, and if we are careful, the race window between PageBuddy() check and page_order() is small, and the worst thing that can happen is that we skip too much and miss some isolation candidates. This is not that bad, as compaction can already fail for many other reasons like parallel allocations, and those have much larger race window. This patch therefore makes the migration scanner obtain the buddy page order and use it to skip the whole buddy page, if the order appears to be in the valid range. It's important that the page_order() is read only once, so that the value used in the checks and in the pfn calculation is the same. But in theory the compiler can replace the local variable by multiple inlines of page_order(). Therefore, the patch introduces page_order_unsafe() that uses ACCESS_ONCE to prevent this. Testing with stress-highalloc from mmtests shows a 15% reduction in number of pages scanned by migration scanner. The reduction is >60% with __GFP_NO_KSWAPD allocations, along with success rates better by few percent. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
e14c720efd |
mm, compaction: remember position within pageblock in free pages scanner
Unlike the migration scanner, the free scanner remembers the beginning of the last scanned pageblock in cc->free_pfn. It might be therefore rescanning pages uselessly when called several times during single compaction. This might have been useful when pages were returned to the buddy allocator after a failed migration, but this is no longer the case. This patch changes the meaning of cc->free_pfn so that if it points to a middle of a pageblock, that pageblock is scanned only from cc->free_pfn to the end. isolate_freepages_block() will record the pfn of the last page it looked at, which is then used to update cc->free_pfn. In the mmtests stress-highalloc benchmark, this has resulted in lowering the ratio between pages scanned by both scanners, from 2.5 free pages per migrate page, to 2.25 free pages per migrate page, without affecting success rates. With __GFP_NO_KSWAPD allocations, this appears to result in a worse ratio (2.1 instead of 1.8), but page migration successes increased by 10%, so this could mean that more useful work can be done until need_resched() aborts this kind of compaction. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
69b7189f12 |
mm, compaction: skip rechecks when lock was already held
Compaction scanners try to lock zone locks as late as possible by checking many page or pageblock properties opportunistically without lock and skipping them if not unsuitable. For pages that pass the initial checks, some properties have to be checked again safely under lock. However, if the lock was already held from a previous iteration in the initial checks, the rechecks are unnecessary. This patch therefore skips the rechecks when the lock was already held. This is now possible to do, since we don't (potentially) drop and reacquire the lock between the initial checks and the safe rechecks anymore. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
8b44d2791f |
mm, compaction: periodically drop lock and restore IRQs in scanners
Compaction scanners regularly check for lock contention and need_resched() through the compact_checklock_irqsave() function. However, if there is no contention, the lock can be held and IRQ disabled for potentially long time. This has been addressed by commit |
||
Vlastimil Babka
|
1f9efdef4f |
mm, compaction: khugepaged should not give up due to need_resched()
Async compaction aborts when it detects zone lock contention or need_resched() is true. David Rientjes has reported that in practice, most direct async compactions for THP allocation abort due to need_resched(). This means that a second direct compaction is never attempted, which might be OK for a page fault, but khugepaged is intended to attempt a sync compaction in such case and in these cases it won't. This patch replaces "bool contended" in compact_control with an int that distinguishes between aborting due to need_resched() and aborting due to lock contention. This allows propagating the abort through all compaction functions as before, but passing the abort reason up to __alloc_pages_slowpath() which decides when to continue with direct reclaim and another compaction attempt. Another problem is that try_to_compact_pages() did not act upon the reported contention (both need_resched() or lock contention) immediately and would proceed with another zone from the zonelist. When need_resched() is true, that means initializing another zone compaction, only to check again need_resched() in isolate_migratepages() and aborting. For zone lock contention, the unintended consequence is that the lock contended status reported back to the allocator is detrmined from the last zone where compaction was attempted, which is rather arbitrary. This patch fixes the problem in the following way: - async compaction of a zone aborting due to need_resched() or fatal signal pending means that further zones should not be tried. We report COMPACT_CONTENDED_SCHED to the allocator. - aborting zone compaction due to lock contention means we can still try another zone, since it has different set of locks. We report back COMPACT_CONTENDED_LOCK only if *all* zones where compaction was attempted, it was aborted due to lock contention. As a result of these fixes, khugepaged will proceed with second sync compaction as intended, when the preceding async compaction aborted due to need_resched(). Page fault compactions aborting due to need_resched() will spare some cycles previously wasted by initializing another zone compaction only to abort again. Lock contention will be reported only when compaction in all zones aborted due to lock contention, and therefore it's not a good idea to try again after reclaim. In stress-highalloc from mmtests configured to use __GFP_NO_KSWAPD, this has improved number of THP collapse allocations by 10%, which shows positive effect on khugepaged. The benchmark's success rates are unchanged as it is not recognized as khugepaged. Numbers of compact_stall and compact_fail events have however decreased by 20%, with compact_success still a bit improved, which is good. With benchmark configured not to use __GFP_NO_KSWAPD, there is 6% improvement in THP collapse allocations, and only slight improvement in stalls and failures. [akpm@linux-foundation.org: fix warnings] Reported-by: David Rientjes <rientjes@google.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
7d49d88683 |
mm, compaction: reduce zone checking frequency in the migration scanner
The unification of the migrate and free scanner families of function has highlighted a difference in how the scanners ensure they only isolate pages of the intended zone. This is important for taking zone lock or lru lock of the correct zone. Due to nodes overlapping, it is however possible to encounter a different zone within the range of the zone being compacted. The free scanner, since its inception by commit |
||
Vlastimil Babka
|
edc2ca6124 |
mm, compaction: move pageblock checks up from isolate_migratepages_range()
isolate_migratepages_range() is the main function of the compaction scanner, called either on a single pageblock by isolate_migratepages() during regular compaction, or on an arbitrary range by CMA's __alloc_contig_migrate_range(). It currently perfoms two pageblock-wide compaction suitability checks, and because of the CMA callpath, it tracks if it crossed a pageblock boundary in order to repeat those checks. However, closer inspection shows that those checks are always true for CMA: - isolation_suitable() is true because CMA sets cc->ignore_skip_hint to true - migrate_async_suitable() check is skipped because CMA uses sync compaction We can therefore move the compaction-specific checks to isolate_migratepages() and simplify isolate_migratepages_range(). Furthermore, we can mimic the freepage scanner family of functions, which has isolate_freepages_block() function called both by compaction from isolate_freepages() and by CMA from isolate_freepages_range(), where each use-case adds own specific glue code. This allows further code simplification. Thus, we rename isolate_migratepages_range() to isolate_migratepages_block() and limit its functionality to a single pageblock (or its subset). For CMA, a new different isolate_migratepages_range() is created as a CMA-specific wrapper for the _block() function. The checks specific to compaction are moved to isolate_migratepages(). As part of the unification of these two families of functions, we remove the redundant zone parameter where applicable, since zone pointer is already passed in cc->zone. Furthermore, going back to compact_zone() and compact_finished() when pageblock is found unsuitable (now by isolate_migratepages()) is wasteful - the checks are meant to skip pageblocks quickly. The patch therefore also introduces a simple loop into isolate_migratepages() so that it does not return immediately on failed pageblock checks, but keeps going until isolate_migratepages_range() gets called once. Similarily to isolate_freepages(), the function periodically checks if it needs to reschedule or abort async compaction. [iamjoonsoo.kim@lge.com: fix isolated page counting bug in compaction] Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
f8224aa5a0 |
mm, compaction: do not recheck suitable_migration_target under lock
isolate_freepages_block() rechecks if the pageblock is suitable to be a target for migration after it has taken the zone->lock. However, the check has been optimized to occur only once per pageblock, and compact_checklock_irqsave() might be dropping and reacquiring lock, which means somebody else might have changed the pageblock's migratetype meanwhile. Furthermore, nothing prevents the migratetype to change right after isolate_freepages_block() has finished isolating. Given how imperfect this is, it's simpler to just rely on the check done in isolate_freepages() without lock, and not pretend that the recheck under lock guarantees anything. It is just a heuristic after all. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
53853e2d2b |
mm, compaction: defer each zone individually instead of preferred zone
When direct sync compaction is often unsuccessful, it may become deferred
for some time to avoid further useless attempts, both sync and async.
Successful high-order allocations un-defer compaction, while further
unsuccessful compaction attempts prolong the compaction deferred period.
Currently the checking and setting deferred status is performed only on
the preferred zone of the allocation that invoked direct compaction. But
compaction itself is attempted on all eligible zones in the zonelist, so
the behavior is suboptimal and may lead both to scenarios where 1)
compaction is attempted uselessly, or 2) where it's not attempted despite
good chances of succeeding, as shown on the examples below:
1) A direct compaction with Normal preferred zone failed and set
deferred compaction for the Normal zone. Another unrelated direct
compaction with DMA32 as preferred zone will attempt to compact DMA32
zone even though the first compaction attempt also included DMA32 zone.
In another scenario, compaction with Normal preferred zone failed to
compact Normal zone, but succeeded in the DMA32 zone, so it will not
defer compaction. In the next attempt, it will try Normal zone which
will fail again, instead of skipping Normal zone and trying DMA32
directly.
2) Kswapd will balance DMA32 zone and reset defer status based on
watermarks looking good. A direct compaction with preferred Normal
zone will skip compaction of all zones including DMA32 because Normal
was still deferred. The allocation might have succeeded in DMA32, but
won't.
This patch makes compaction deferring work on individual zone basis
instead of preferred zone. For each zone, it checks compaction_deferred()
to decide if the zone should be skipped. If watermarks fail after
compacting the zone, defer_compaction() is called. The zone where
watermarks passed can still be deferred when the allocation attempt is
unsuccessful. When allocation is successful, compaction_defer_reset() is
called for the zone containing the allocated page. This approach should
approximate calling defer_compaction() only on zones where compaction was
attempted and did not yield allocated page. There might be corner cases
but that is inevitable as long as the decision to stop compacting dues not
guarantee that a page will be allocated.
Due to a new COMPACT_DEFERRED return value, some functions relying
implicitly on COMPACT_SKIPPED = 0 had to be updated, with comments made
more accurate. The did_some_progress output parameter of
__alloc_pages_direct_compact() is removed completely, as the caller
actually does not use it after compaction sets it - it is only considered
when direct reclaim sets it.
During testing on a two-node machine with a single very small Normal zone
on node 1, this patch has improved success rates in stress-highalloc
mmtests benchmark. The success here were previously made worse by commit
|
||
Vlastimil Babka
|
be9765722e |
mm, compaction: properly signal and act upon lock and need_sched() contention
Compaction uses compact_checklock_irqsave() function to periodically check for lock contention and need_resched() to either abort async compaction, or to free the lock, schedule and retake the lock. When aborting, cc->contended is set to signal the contended state to the caller. Two problems have been identified in this mechanism. First, compaction also calls directly cond_resched() in both scanners when no lock is yet taken. This call either does not abort async compaction, or set cc->contended appropriately. This patch introduces a new compact_should_abort() function to achieve both. In isolate_freepages(), the check frequency is reduced to once by SWAP_CLUSTER_MAX pageblocks to match what the migration scanner does in the preliminary page checks. In case a pageblock is found suitable for calling isolate_freepages_block(), the checks within there are done on higher frequency. Second, isolate_freepages() does not check if isolate_freepages_block() aborted due to contention, and advances to the next pageblock. This violates the principle of aborting on contention, and might result in pageblocks not being scanned completely, since the scanning cursor is advanced. This problem has been noticed in the code by Joonsoo Kim when reviewing related patches. This patch makes isolate_freepages_block() check the cc->contended flag and abort. In case isolate_freepages() has already isolated some pages before aborting due to contention, page migration will proceed, which is OK since we do not want to waste the work that has been done, and page migration has own checks for contention. However, we do not want another isolation attempt by either of the scanners, so cc->contended flag check is added also to compaction_alloc() and compact_finished() to make sure compaction is aborted right after the migration. The outcome of the patch should be reduced lock contention by async compaction and lower latencies for higher-order allocations where direct compaction is involved. [akpm@linux-foundation.org: fix typo in comment] Reported-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: David Rientjes <rientjes@google.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
e9ade56991 |
mm/compaction: avoid rescanning pageblocks in isolate_freepages
The compaction free scanner in isolate_freepages() currently remembers PFN of the highest pageblock where it successfully isolates, to be used as the starting pageblock for the next invocation. The rationale behind this is that page migration might return free pages to the allocator when migration fails and we don't want to skip them if the compaction continues. Since migration now returns free pages back to compaction code where they can be reused, this is no longer a concern. This patch changes isolate_freepages() so that the PFN for restarting is updated with each pageblock where isolation is attempted. Using stress-highalloc from mmtests, this resulted in 10% reduction of the pages scanned by the free scanner. Note that the somewhat similar functionality that records highest successful pageblock in zone->compact_cached_free_pfn, remains unchanged. This cache is used when the whole compaction is restarted, not for multiple invocations of the free scanner during single compaction. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
f8c9301fa5 |
mm/compaction: do not count migratepages when unnecessary
During compaction, update_nr_listpages() has been used to count remaining non-migrated and free pages after a call to migrage_pages(). The freepages counting has become unneccessary, and it turns out that migratepages counting is also unnecessary in most cases. The only situation when it's needed to count cc->migratepages is when migrate_pages() returns with a negative error code. Otherwise, the non-negative return value is the number of pages that were not migrated, which is exactly the count of remaining pages in the cc->migratepages list. Furthermore, any non-zero count is only interesting for the tracepoint of mm_compaction_migratepages events, because after that all remaining unmigrated pages are put back and their count is set to 0. This patch therefore removes update_nr_listpages() completely, and changes the tracepoint definition so that the manual counting is done only when the tracepoint is enabled, and only when migrate_pages() returns a negative error code. Furthermore, migrate_pages() and the tracepoints won't be called when there's nothing to migrate. This potentially avoids some wasted cycles and reduces the volume of uninteresting mm_compaction_migratepages events where "nr_migrated=0 nr_failed=0". In the stress-highalloc mmtest, this was about 75% of the events. The mm_compaction_isolate_migratepages event is better for determining that nothing was isolated for migration, and this one was just duplicating the info. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David Rientjes
|
aeef4b8380 |
mm, compaction: terminate async compaction when rescheduling
Async compaction terminates prematurely when need_resched(), see compact_checklock_irqsave(). This can never trigger, however, if the cond_resched() in isolate_migratepages_range() always takes care of the scheduling. If the cond_resched() actually triggers, then terminate this pageblock scan for async compaction as well. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David Rientjes
|
e0b9daeb45 |
mm, compaction: embed migration mode in compact_control
We're going to want to manipulate the migration mode for compaction in the page allocator, and currently compact_control's sync field is only a bool. Currently, we only do MIGRATE_ASYNC or MIGRATE_SYNC_LIGHT compaction depending on the value of this bool. Convert the bool to enum migrate_mode and pass the migration mode in directly. Later, we'll want to avoid MIGRATE_SYNC_LIGHT for thp allocations in the pagefault patch to avoid unnecessary latency. This also alters compaction triggered from sysfs, either for the entire system or for a node, to force MIGRATE_SYNC. [akpm@linux-foundation.org: fix build] [iamjoonsoo.kim@lge.com: use MIGRATE_SYNC in alloc_contig_range()] Signed-off-by: David Rientjes <rientjes@google.com> Suggested-by: Mel Gorman <mgorman@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David Rientjes
|
35979ef339 |
mm, compaction: add per-zone migration pfn cache for async compaction
Each zone has a cached migration scanner pfn for memory compaction so that subsequent calls to memory compaction can start where the previous call left off. Currently, the compaction migration scanner only updates the per-zone cached pfn when pageblocks were not skipped for async compaction. This creates a dependency on calling sync compaction to avoid having subsequent calls to async compaction from scanning an enormous amount of non-MOVABLE pageblocks each time it is called. On large machines, this could be potentially very expensive. This patch adds a per-zone cached migration scanner pfn only for async compaction. It is updated everytime a pageblock has been scanned in its entirety and when no pages from it were successfully isolated. The cached migration scanner pfn for sync compaction is updated only when called for sync compaction. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Greg Thelen <gthelen@google.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David Rientjes
|
d53aea3d46 |
mm, compaction: return failed migration target pages back to freelist
Greg reported that he found isolated free pages were returned back to the VM rather than the compaction freelist. This will cause holes behind the free scanner and cause it to reallocate additional memory if necessary later. He detected the problem at runtime seeing that ext4 metadata pages (esp the ones read by "sbi->s_group_desc[i] = sb_bread(sb, block)") were constantly visited by compaction calls of migrate_pages(). These pages had a non-zero b_count which caused fallback_migrate_page() -> try_to_release_page() -> try_to_free_buffers() to fail. Memory compaction works by having a "freeing scanner" scan from one end of a zone which isolates pages as migration targets while another "migrating scanner" scans from the other end of the same zone which isolates pages for migration. When page migration fails for an isolated page, the target page is returned to the system rather than the freelist built by the freeing scanner. This may require the freeing scanner to continue scanning memory after suitable migration targets have already been returned to the system needlessly. This patch returns destination pages to the freeing scanner freelist when page migration fails. This prevents unnecessary work done by the freeing scanner but also encourages memory to be as compacted as possible at the end of the zone. Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: Greg Thelen <gthelen@google.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David Rientjes
|
68711a7463 |
mm, migration: add destination page freeing callback
Memory migration uses a callback defined by the caller to determine how to allocate destination pages. When migration fails for a source page, however, it frees the destination page back to the system. This patch adds a memory migration callback defined by the caller to determine how to free destination pages. If a caller, such as memory compaction, builds its own freelist for migration targets, this can reuse already freed memory instead of scanning additional memory. If the caller provides a function to handle freeing of destination pages, it is called when page migration fails. If the caller passes NULL then freeing back to the system will be handled as usual. This patch introduces no functional change. Signed-off-by: David Rientjes <rientjes@google.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
c96b9e508f |
mm/compaction: cleanup isolate_freepages()
isolate_freepages() is currently somewhat hard to follow thanks to many looks like it is related to the 'low_pfn' variable, but in fact it is not. This patch renames the 'high_pfn' variable to a hopefully less confusing name, and slightly changes its handling without a functional change. A comment made obsolete by recent changes is also updated. [akpm@linux-foundation.org: comment fixes, per Minchan] [iamjoonsoo.kim@lge.com: cleanups] Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Cc: Dongjun Shin <d.j.shin@samsung.com> Cc: Sunghwan Yun <sunghwan.yun@samsung.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Heesub Shin
|
13fb44e4b0 |
mm/compaction: clean up unused code lines
Remove code lines currently not in use or never called. Signed-off-by: Heesub Shin <heesub.shin@samsung.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Dongjun Shin <d.j.shin@samsung.com> Cc: Sunghwan Yun <sunghwan.yun@samsung.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Cc: Dongjun Shin <d.j.shin@samsung.com> Cc: Sunghwan Yun <sunghwan.yun@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
49e068f0b7 |
mm/compaction: make isolate_freepages start at pageblock boundary
The compaction freepage scanner implementation in isolate_freepages() starts by taking the current cc->free_pfn value as the first pfn. In a for loop, it scans from this first pfn to the end of the pageblock, and then subtracts pageblock_nr_pages from the first pfn to obtain the first pfn for the next for loop iteration. This means that when cc->free_pfn starts at offset X rather than being aligned on pageblock boundary, the scanner will start at offset X in all scanned pageblock, ignoring potentially many free pages. Currently this can happen when a) zone's end pfn is not pageblock aligned, or b) through zone->compact_cached_free_pfn with CONFIG_HOLES_IN_ZONE enabled and a hole spanning the beginning of a pageblock This patch fixes the problem by aligning the initial pfn in isolate_freepages() to pageblock boundary. This also permits replacing the end-of-pageblock alignment within the for loop with a simple pageblock_nr_pages increment. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Heesub Shin <heesub.shin@samsung.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Dongjun Shin <d.j.shin@samsung.com> Cc: Sunghwan Yun <sunghwan.yun@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David Rientjes
|
da1c67a76f |
mm, compaction: determine isolation mode only once
The conditions that control the isolation mode in isolate_migratepages_range() do not change during the iteration, so extract them out and only define the value once. This actually does have an effect, gcc doesn't optimize it itself because of cc->sync. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Joonsoo Kim
|
b6c750163c |
mm/compaction: clean-up code on success of ballon isolation
It is just for clean-up to reduce code size and improve readability. There is no functional change. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Joonsoo Kim
|
c122b2087a |
mm/compaction: check pageblock suitability once per pageblock
isolation_suitable() and migrate_async_suitable() is used to be sure that this pageblock range is fine to be migragted. It isn't needed to call it on every page. Current code do well if not suitable, but, don't do well when suitable. 1) It re-checks isolation_suitable() on each page of a pageblock that was already estabilished as suitable. 2) It re-checks migrate_async_suitable() on each page of a pageblock that was not entered through the next_pageblock: label, because last_pageblock_nr is not otherwise updated. This patch fixes situation by 1) calling isolation_suitable() only once per pageblock and 2) always updating last_pageblock_nr to the pageblock that was just checked. Additionally, move PageBuddy() check after pageblock unit check, since pageblock check is the first thing we should do and makes things more simple. [vbabka@suse.cz: rephrase commit description] Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Joonsoo Kim
|
be1aa03b97 |
mm/compaction: change the timing to check to drop the spinlock
It is odd to drop the spinlock when we scan (SWAP_CLUSTER_MAX - 1) th pfn page. This may results in below situation while isolating migratepage. 1. try isolate 0x0 ~ 0x200 pfn pages. 2. When low_pfn is 0x1ff, ((low_pfn+1) % SWAP_CLUSTER_MAX) == 0, so drop the spinlock. 3. Then, to complete isolating, retry to aquire the lock. I think that it is better to use SWAP_CLUSTER_MAX th pfn for checking the criteria about dropping the lock. This has no harm 0x0 pfn, because, at this time, locked variable would be false. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Joonsoo Kim
|
01ead5340b |
mm/compaction: do not call suitable_migration_target() on every page
suitable_migration_target() checks that pageblock is suitable for migration target. In isolate_freepages_block(), it is called on every page and this is inefficient. So make it called once per pageblock. suitable_migration_target() also checks if page is highorder or not, but it's criteria for highorder is pageblock order. So calling it once within pageblock range has no problem. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Joonsoo Kim
|
7d348b9ea6 |
mm/compaction: disallow high-order page for migration target
Purpose of compaction is to get a high order page. Currently, if we find high-order page while searching migration target page, we break it to order-0 pages and use them as migration target. It is contrary to purpose of compaction, so disallow high-order page to be used for migration target. Additionally, clean-up logic in suitable_migration_target() to simplify the code. There is no functional changes from this clean-up. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Rashika Kheria
|
74e77fb9a2 |
mm/compaction.c: mark function as static
Mark function as static in compaction.c because it is not used outside this file. This eliminates the following warning from mm/compaction.c: mm/compaction.c:1190:9: warning: no previous prototype for `sysfs_compact_node' [-Wmissing-prototypes Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Rik van Riel <riel@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David Rientjes
|
119d6d59dc |
mm, compaction: avoid isolating pinned pages
Page migration will fail for memory that is pinned in memory with, for example, get_user_pages(). In this case, it is unnecessary to take zone->lru_lock or isolating the page and passing it to page migration which will ultimately fail. This is a racy check, the page can still change from under us, but in that case we'll just fail later when attempting to move the page. This avoids very expensive memory compaction when faulting transparent hugepages after pinning a lot of memory with a Mellanox driver. On a 128GB machine and pinning ~120GB of memory, before this patch we see the enormous disparity in the number of page migration failures because of the pinning (from /proc/vmstat): compact_pages_moved 8450 compact_pagemigrate_failed 15614415 0.05% of pages isolated are successfully migrated and explicitly triggering memory compaction takes 102 seconds. After the patch: compact_pages_moved 9197 compact_pagemigrate_failed 7 99.9% of pages isolated are now successfully migrated in this configuration and memory compaction takes less than one second. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Rik van Riel <riel@redhat.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
David Rientjes
|
91ca918648 |
mm, compaction: ignore pageblock skip when manually invoking compaction
The cached pageblock hint should be ignored when triggering compaction through /proc/sys/vm/compact_memory so all eligible memory is isolated. Manually invoking compaction is known to be expensive, there's no need to skip pageblocks based on heuristics (mainly for debugging). Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Laura Abbott
|
2af120bc04 |
mm/compaction: break out of loop on !PageBuddy in isolate_freepages_block
We received several reports of bad page state when freeing CMA pages previously allocated with alloc_contig_range: BUG: Bad page state in process Binder_A pfn:63202 page:d21130b0 count:0 mapcount:1 mapping: (null) index:0x7dfbf page flags: 0x40080068(uptodate|lru|active|swapbacked) Based on the page state, it looks like the page was still in use. The page flags do not make sense for the use case though. Further debugging showed that despite alloc_contig_range returning success, at least one page in the range still remained in the buddy allocator. There is an issue with isolate_freepages_block. In strict mode (which CMA uses), if any pages in the range cannot be isolated, isolate_freepages_block should return failure 0. The current check keeps track of the total number of isolated pages and compares against the size of the range: if (strict && nr_strict_required > total_isolated) total_isolated = 0; After taking the zone lock, if one of the pages in the range is not in the buddy allocator, we continue through the loop and do not increment total_isolated. If in the last iteration of the loop we isolate more than one page (e.g. last page needed is a higher order page), the check for total_isolated may pass and we fail to detect that a page was skipped. The fix is to bail out if the loop immediately if we are in strict mode. There's no benfit to continuing anyway since we need all pages to be isolated. Additionally, drop the error checking based on nr_strict_required and just check the pfn ranges. This matches with what isolate_freepages_range does. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mel Gorman
|
6c14466cc0 |
mm: improve documentation of page_order
Developers occasionally try and optimise PFN scanners by using page_order but miss that in general it requires zone->lock. This has happened twice for compaction.c and rejected both times. This patch clarifies the documentation of page_order and adds a note to compaction.c why page_order is not used. [akpm@linux-foundation.org: tweaks] [lauraa@codeaurora.org: Corrected a page_zone(page)->lock reference] Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rafael Aquini <aquini@redhat.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Sasha Levin
|
309381feae |
mm: dump page when hitting a VM_BUG_ON using VM_BUG_ON_PAGE
Most of the VM_BUG_ON assertions are performed on a page. Usually, when one of these assertions fails we'll get a BUG_ON with a call stack and the registers. I've recently noticed based on the requests to add a small piece of code that dumps the page to various VM_BUG_ON sites that the page dump is quite useful to people debugging issues in mm. This patch adds a VM_BUG_ON_PAGE(cond, page) which beyond doing what VM_BUG_ON() does, also dumps the page before executing the actual BUG_ON. [akpm@linux-foundation.org: fix up includes] Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
55b7c4c99f |
mm: compaction: reset scanner positions immediately when they meet
Compaction used to start its migrate and free page scaners at the zone's lowest and highest pfn, respectively. Later, caching was introduced to remember the scanners' progress across compaction attempts so that pageblocks are not re-scanned uselessly. Additionally, pageblocks where isolation failed are marked to be quickly skipped when encountered again in future compactions. Currently, both the reset of cached pfn's and clearing of the pageblock skip information for a zone is done in __reset_isolation_suitable(). This function gets called when: - compaction is restarting after being deferred - compact_blockskip_flush flag is set in compact_finished() when the scanners meet (and not again cleared when direct compaction succeeds in allocation) and kswapd acts upon this flag before going to sleep This behavior is suboptimal for several reasons: - when direct sync compaction is called after async compaction fails (in the allocation slowpath), it will effectively do nothing, unless kswapd happens to process the compact_blockskip_flush flag meanwhile. This is racy and goes against the purpose of sync compaction to more thoroughly retry the compaction of a zone where async compaction has failed. The restart-after-deferring path cannot help here as deferring happens only after the sync compaction fails. It is also done only for the preferred zone, while the compaction might be done for a fallback zone. - the mechanism of marking pageblock to be skipped has little value since the cached pfn's are reset only together with the pageblock skip flags. This effectively limits pageblock skip usage to parallel compactions. This patch changes compact_finished() so that cached pfn's are reset immediately when the scanners meet. Clearing pageblock skip flags is unchanged, as well as the other situations where cached pfn's are reset. This allows the sync-after-async compaction to retry pageblocks not marked as skipped, such as blocks !MIGRATE_MOVABLE blocks that async compactions now skips without marking them. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
50b5b094e6 |
mm: compaction: do not mark unmovable pageblocks as skipped in async compaction
Compaction temporarily marks pageblocks where it fails to isolate pages as to-be-skipped in further compactions, in order to improve efficiency. One of the reasons to fail isolating pages is that isolation is not attempted in pageblocks that are not of MIGRATE_MOVABLE (or CMA) type. The problem is that blocks skipped due to not being MIGRATE_MOVABLE in async compaction become skipped due to the temporary mark also in future sync compaction. Moreover, this may follow quite soon during __alloc_page_slowpath, without much time for kswapd to clear the pageblock skip marks. This goes against the idea that sync compaction should try to scan these blocks more thoroughly than the async compaction. The fix is to ensure in async compaction that these !MIGRATE_MOVABLE blocks are not marked to be skipped. Note this should not affect performance or locking impact of further async compactions, as skipping a block due to being !MIGRATE_MOVABLE is done soon after skipping a block marked to be skipped, both without locking. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@redhat.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
7ed695e069 |
mm: compaction: detect when scanners meet in isolate_freepages
Compaction of a zone is finished when the migrate scanner (which begins at the zone's lowest pfn) meets the free page scanner (which begins at the zone's highest pfn). This is detected in compact_zone() and in the case of direct compaction, the compact_blockskip_flush flag is set so that kswapd later resets the cached scanner pfn's, and a new compaction may again start at the zone's borders. The meeting of the scanners can happen during either scanner's activity. However, it may currently fail to be detected when it occurs in the free page scanner, due to two problems. First, isolate_freepages() keeps free_pfn at the highest block where it isolated pages from, for the purposes of not missing the pages that are returned back to allocator when migration fails. Second, failing to isolate enough free pages due to scanners meeting results in -ENOMEM being returned by migrate_pages(), which makes compact_zone() bail out immediately without calling compact_finished() that would detect scanners meeting. This failure to detect scanners meeting might result in repeated attempts at compaction of a zone that keep starting from the cached pfn's close to the meeting point, and quickly failing through the -ENOMEM path, without the cached pfns being reset, over and over. This has been observed (through additional tracepoints) in the third phase of the mmtests stress-highalloc benchmark, where the allocator runs on an otherwise idle system. The problem was observed in the DMA32 zone, which was used as a fallback to the preferred Normal zone, but on the 4GB system it was actually the largest zone. The problem is even amplified for such fallback zone - the deferred compaction logic, which could (after being fixed by a previous patch) reset the cached scanner pfn's, is only applied to the preferred zone and not for the fallbacks. The problem in the third phase of the benchmark was further amplified by commit |
||
Vlastimil Babka
|
d3132e4b83 |
mm: compaction: reset cached scanner pfn's before reading them
Compaction caches pfn's for its migrate and free scanners to avoid scanning the whole zone each time. In compact_zone(), the cached values are read to set up initial values for the scanners. There are several situations when these cached pfn's are reset to the first and last pfn of the zone, respectively. One of these situations is when a compaction has been deferred for a zone and is now being restarted during a direct compaction, which is also done in compact_zone(). However, compact_zone() currently reads the cached pfn's *before* resetting them. This means the reset doesn't affect the compaction that performs it, and with good chance also subsequent compactions, as update_pageblock_skip() is likely to be called and update the cached pfn's to those being processed. Another chance for a successful reset is when a direct compaction detects that migration and free scanners meet (which has its own problems addressed by another patch) and sets update_pageblock_skip flag which kswapd uses to do the reset because it goes to sleep. This is clearly a bug that results in non-deterministic behavior, so this patch moves the cached pfn reset to be performed *before* the values are read. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Vlastimil Babka
|
de6c60a6c1 |
mm: compaction: encapsulate defer reset logic
Currently there are several functions to manipulate the deferred compaction state variables. The remaining case where the variables are touched directly is when a successful allocation occurs in direct compaction, or is expected to be successful in the future by kswapd. Here, the lowest order that is expected to fail is updated, and in the case of successful allocation, the deferred status and counter is reset completely. Create a new function compaction_defer_reset() to encapsulate this functionality and make it easier to understand the code. No functional change. Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mel Gorman
|
0eb927c0ab |
mm: compaction: trace compaction begin and end
The broad goal of the series is to improve allocation success rates for huge pages through memory compaction, while trying not to increase the compaction overhead. The original objective was to reintroduce capturing of high-order pages freed by the compaction, before they are split by concurrent activity. However, several bugs and opportunities for simple improvements were found in the current implementation, mostly through extra tracepoints (which are however too ugly for now to be considered for sending). The patches mostly deal with two mechanisms that reduce compaction overhead, which is caching the progress of migrate and free scanners, and marking pageblocks where isolation failed to be skipped during further scans. Patch 1 (from mgorman) adds tracepoints that allow calculate time spent in compaction and potentially debug scanner pfn values. Patch 2 encapsulates the some functionality for handling deferred compactions for better maintainability, without a functional change type is not determined without being actually needed. Patch 3 fixes a bug where cached scanner pfn's are sometimes reset only after they have been read to initialize a compaction run. Patch 4 fixes a bug where scanners meeting is sometimes not properly detected and can lead to multiple compaction attempts quitting early without doing any work. Patch 5 improves the chances of sync compaction to process pageblocks that async compaction has skipped due to being !MIGRATE_MOVABLE. Patch 6 improves the chances of sync direct compaction to actually do anything when called after async compaction fails during allocation slowpath. The impact of patches were validated using mmtests's stress-highalloc benchmark with mmtests's stress-highalloc benchmark on a x86_64 machine with 4GB memory. Due to instability of the results (mostly related to the bugs fixed by patches 2 and 3), 10 iterations were performed, taking min,mean,max values for success rates and mean values for time and vmstat-based metrics. First, the default GFP_HIGHUSER_MOVABLE allocations were tested with the patches stacked on top of v3.13-rc2. Patch 2 is OK to serve as baseline due to no functional changes in 1 and 2. Comments below. stress-highalloc 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 2-nothp 3-nothp 4-nothp 5-nothp 6-nothp Success 1 Min 9.00 ( 0.00%) 10.00 (-11.11%) 43.00 (-377.78%) 43.00 (-377.78%) 33.00 (-266.67%) Success 1 Mean 27.50 ( 0.00%) 25.30 ( 8.00%) 45.50 (-65.45%) 45.90 (-66.91%) 46.30 (-68.36%) Success 1 Max 36.00 ( 0.00%) 36.00 ( 0.00%) 47.00 (-30.56%) 48.00 (-33.33%) 52.00 (-44.44%) Success 2 Min 10.00 ( 0.00%) 8.00 ( 20.00%) 46.00 (-360.00%) 45.00 (-350.00%) 35.00 (-250.00%) Success 2 Mean 26.40 ( 0.00%) 23.50 ( 10.98%) 47.30 (-79.17%) 47.60 (-80.30%) 48.10 (-82.20%) Success 2 Max 34.00 ( 0.00%) 33.00 ( 2.94%) 48.00 (-41.18%) 50.00 (-47.06%) 54.00 (-58.82%) Success 3 Min 65.00 ( 0.00%) 63.00 ( 3.08%) 85.00 (-30.77%) 84.00 (-29.23%) 85.00 (-30.77%) Success 3 Mean 76.70 ( 0.00%) 70.50 ( 8.08%) 86.20 (-12.39%) 85.50 (-11.47%) 86.00 (-12.13%) Success 3 Max 87.00 ( 0.00%) 86.00 ( 1.15%) 88.00 ( -1.15%) 87.00 ( 0.00%) 87.00 ( 0.00%) 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 2-nothp 3-nothp 4-nothp 5-nothp 6-nothp User 6437.72 6459.76 5960.32 5974.55 6019.67 System 1049.65 1049.09 1029.32 1031.47 1032.31 Elapsed 1856.77 1874.48 1949.97 1994.22 1983.15 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 2-nothp 3-nothp 4-nothp 5-nothp 6-nothp Minor Faults 253952267 254581900 250030122 250507333 250157829 Major Faults 420 407 506 530 530 Swap Ins 4 9 9 6 6 Swap Outs 398 375 345 346 333 Direct pages scanned 197538 189017 298574 287019 299063 Kswapd pages scanned 1809843 1801308 1846674 1873184 1861089 Kswapd pages reclaimed 1806972 1798684 1844219 1870509 1858622 Direct pages reclaimed 197227 188829 298380 286822 298835 Kswapd efficiency 99% 99% 99% 99% 99% Kswapd velocity 953.382 970.449 952.243 934.569 922.286 Direct efficiency 99% 99% 99% 99% 99% Direct velocity 104.058 101.832 153.961 143.200 148.205 Percentage direct scans 9% 9% 13% 13% 13% Zone normal velocity 347.289 359.676 348.063 339.933 332.983 Zone dma32 velocity 710.151 712.605 758.140 737.835 737.507 Zone dma velocity 0.000 0.000 0.000 0.000 0.000 Page writes by reclaim 557.600 429.000 353.600 426.400 381.800 Page writes file 159 53 7 79 48 Page writes anon 398 375 345 346 333 Page reclaim immediate 825 644 411 575 420 Sector Reads 2781750 2769780 2878547 2939128 2910483 Sector Writes 12080843 12083351 12012892 12002132 12010745 Page rescued immediate 0 0 0 0 0 Slabs scanned |
||
Joonsoo Kim
|
6815bf3f23 |
mm/compaction: respect ignore_skip_hint in update_pageblock_skip
update_pageblock_skip() only fits to compaction which tries to isolate by pageblock unit. If isolate_migratepages_range() is called by CMA, it try to isolate regardless of pageblock unit and it don't reference get_pageblock_skip() by ignore_skip_hint. We should also respect it on update_pageblock_skip() to prevent from setting the wrong information. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: <stable@vger.kernel.org> [3.7+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Jerome Marchand
|
9e4be4708e |
mm/compaction.c: update comment about zone lock in isolate_freepages_block
Since commit
|
||
David Rientjes
|
f6ea3adb70 |
mm/compaction.c: periodically schedule when freeing pages
We've been getting warnings about an excessive amount of time spent allocating pages for migration during memory compaction without scheduling. isolate_freepages_block() already periodically checks for contended locks or the need to schedule, but isolate_freepages() never does. When a zone is massively long and no suitable targets can be found, this iteration can be quite expensive without ever doing cond_resched(). Check periodically for the need to reschedule while the compaction free scanner iterates. Signed-off-by: David Rientjes <rientjes@google.com> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Acked-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mel Gorman
|
3a7200af3d |
mm: compaction: do not compact pgdat for order-0
If kswapd was reclaiming for a high order and resets it to 0 due to fragmentation it will still call compact_pgdat. For the most part, this will fail a compaction_suitable() test and not compact but it is unnecessarily sloppy. It could be fixed in the caller but fix it in the API instead. [dhillf@gmail.com: pointed out that it was a potential problem] Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Hillf Danton <dhillf@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Cody P Schafer
|
108bcc96ef |
mm: add & use zone_end_pfn() and zone_spans_pfn()
Add 2 helpers (zone_end_pfn() and zone_spans_pfn()) to reduce code duplication. This also switches to using them in compaction (where an additional variable needed to be renamed), page_alloc, vmstat, memory_hotplug, and kmemleak. Note that in compaction.c I avoid calling zone_end_pfn() repeatedly because I expect at some point the sycronization issues with start_pfn & spanned_pages will need fixing, either by actually using the seqlock or clever memory barrier usage. Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Hugh Dickins
|
9c620e2bc5 |
mm: remove offlining arg to migrate_pages
No functional change, but the only purpose of the offlining argument to migrate_pages() etc, was to ensure that __unmap_and_move() could migrate a KSM page for memory hotremove (which took ksm_thread_mutex) but not for other callers. Now all cases are safe, remove the arg. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Petr Holasek <pholasek@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Izik Eidus <izik.eidus@ravellosystems.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Minchan Kim
|
194159fbcc |
mm: remove MIGRATE_ISOLATE check in hotpath
Several functions test MIGRATE_ISOLATE and some of those are hotpath but MIGRATE_ISOLATE is used only if we enable CONFIG_MEMORY_ISOLATION(ie, CMA, memory-hotplug and memory-failure) which are not common config option. So let's not add unnecessary overhead and code when we don't enable CONFIG_MEMORY_ISOLATION. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Andrew Morton
|
7103f16dbf |
mm: compaction: make __compact_pgdat() and compact_pgdat() return void
These functions always return 0. Formalise this. Cc: Jason Liu <r64343@freescale.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mel Gorman
|
a9aacbccf3 |
mm: compaction: do not accidentally skip pageblocks in the migrate scanner
Compaction uses the ALIGN macro incorrectly with the migrate scanner by adding pageblock_nr_pages to a PFN. It happened to work when initially implemented as the starting PFN was also aligned but with caching restarts and isolating in smaller chunks this is no longer always true. The impact is that the migrate scanner scans outside its current pageblock. As pfn_valid() is still checked properly it does not cause any failure and the impact of the bug is that in some cases it will scan more than necessary when it crosses a page boundary but by no more than COMPACT_CLUSTER_MAX. It is highly unlikely this is even measurable but it's still wrong so this patch addresses the problem. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mel Gorman
|
8fb74b9fb2 |
mm: compaction: partially revert capture of suitable high-order page
Eric Wong reported on 3.7 and 3.8-rc2 that ppoll() got stuck when waiting for POLLIN on a local TCP socket. It was easier to trigger if there was disk IO and dirty pages at the same time and he bisected it to commit |
||
Jason Liu
|
7964c06d66 |
mm: compaction: fix echo 1 > compact_memory return error issue
when run the folloing command under shell, it will return error sh/$ echo 1 > /proc/sys/vm/compact_memory sh/$ sh: write error: Bad address After strace, I found the following log: ... write(1, "1\n", 2) = 3 write(1, "", 4294967295) = -1 EFAULT (Bad address) write(2, "echo: write error: Bad address\n", 31echo: write error: Bad address ) = 31 This tells system return 3(COMPACT_COMPLETE) after write data to compact_memory. The fix is to make the system just return 0 instead 3(COMPACT_COMPLETE) from sysctl_compaction_handler after compaction_nodes finished. Signed-off-by: Jason Liu <r64343@freescale.com> Suggested-by: David Rientjes <rientjes@google.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Minchan Kim
|
010fc29a45 |
compaction: fix build error in CMA && !COMPACTION
isolate_freepages_block() and isolate_migratepages_range() are used for CMA as well as compaction so it breaks build for CONFIG_CMA && !CONFIG_COMPACTION. This patch fixes it. [akpm@linux-foundation.org: add "do { } while (0)", per Mel] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |