Commit Graph

232 Commits

Author SHA1 Message Date
Vathsala Nagaraju
0fdb3f75a3 drm/i915/psr: Adds psrwake options for all platforms
Adds new psrwake options defined in the below table.
Platform	PSR wake options vbt version
KBL/CFL/WHL	All(205+)
BXT		Uses old interpretation.
CNL/ICL+	All(205+)
GLK		All(205+)
SKL		All PV releases (Check for 205+ might help but cannot be foolproof)

We will continue with newer interpretation for SKL from 205.

v2: Jani
    Keep the bdb version check.
v3:
    Apply newer version for skl from 205+(DK).
    Add (version check && platform list) (Jani).
    Add bdb version for each platform in commit message(DK).

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Puthikorn Voravootivat <puthik@chromium.org>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ashutosh D Shukla <ashutosh.d.shukla@intel.com>
Cc: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1529302326-3567-1-git-send-email-vathsala.nagaraju@intel.com
2018-06-19 11:22:34 +03:00
Jani Nikula
0ede014188 drm/i915/vbt: switch to kernel unsigned int types
We have fairly mixed uintN_t vs. uN usage throughout the driver, but try
to stick to kernel types at least where it's more prevalent.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ed5de29c280797b20eb625d52592dcbba8326684.1528794959.git.jani.nikula@intel.com
2018-06-18 14:44:52 +03:00
Jani Nikula
13d0464b32 drm/i915: be more strict about HAS_PCH_NOP() usage
HAS_PCH_NOP() implies a PCH platform without south display, not generic
disabled display. Prefer num_pipes == 0 for PCH independent checks.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180608123330.31003-5-jani.nikula@intel.com
2018-06-11 10:21:18 +03:00
Radhakrishna Sripada
3937eb1a07 drm/i915/icl: Map VBT DDC Pin to BSpec DDC Pin
On ICL we need to map VBT DDC Pin to BSpec DDC Pin.
Adding ICL Pin Values.

According to VBT
Block 2 (General Bytes Definition)
DDC Bus

+----------+-----------+--------------------+
| DDI Type | VBT Value | BSpec Mapped Value |
+----------+-----------+--------------------+
| DDI-A    | 0x1       | 0x1                |
| DDI-B    | 0x2       | 0x2                |
| PORT-1   | 0x4       | 0x9                |
| PORT-2   | 0x5       | 0xA                |
| PORT-3   | 0x6       | 0xB                |
| PORT-4   | 0x7       | 0xC                |
+----------+-----------+--------------------+

Cc: James Ausmus <james.ausmus@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Paulo: checkpatch fixes.]
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180522002558.29262-9-paulo.r.zanoni@intel.com
2018-06-01 16:13:54 -07:00
Ville Syrjälä
ca3b3fa344 drm/i915: Consult VBT "LVDS config" bits to determine whether internal LVDS is present
VBT seems to have some bits to tell us whether the internal LVDS port
has something hooked up. In theory one might expect the VBT to not have
a child device for the LVDS port if there's no panel hooked up, but
in practice many VBTs still add the child device. The "LVDS config" bits
seem more reliable though, so let's check those.

So far we've used the "LVDS config" bits to check for eDP support on
ILK+, and disable the internal LVDS when the value is 3. That value
is actually documented as "Both internal LVDS and SDVO LVDS", but in
practice it looks to mean "eDP" on all the ilk+ VBTs I've seen. So let's
keep that interpretation, but for pre-ILK we will consider the value
3 to also indicate the presence of the internal LVDS.

Currently we have 25 DMI matches for the "no internal LVDS" quirk. In an
effort to reduce that let's toss in a WARN when the DMI match and VBT
both tell us that the internal LVDS is not present. The hope is that
people will report a bug, and then we can just nuke the corresponding
entry from the DMI quirk list. Credits to Jani for this idea.

v2: Split the basic int_lvds_support thing to a separate patch (Jani)
v3: Rebase
v4: Limit this to VBT version >= 134

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180518150138.18361-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2018-05-25 18:00:26 +03:00
Vathsala Nagaraju
77312ae8f0 drm/i915/psr: vbt change for psr
For psr block #9, the vbt description has moved to options [0-3] for
TP1,TP2,TP3 Wakeup time from decimal value without any change to vbt
structure. Since spec does not  mention from which VBT version this
change was added to vbt.bsf file, we cannot depend on bdb->version check
to change for all the platforms.

There is RCR inplace for GOP team to  provide the version number
to make generic change. Since Kabylake with bdb version 209 is having this
change, limiting this change to gen9_bc and version 209+ to unblock google.

Tested on skl(bdb version 203,without options) and
kabylake(bdb version 209,212) having new options.

bspec 20131

v2: (Jani and Rodrigo)
    move the 165 version check to intel_bios.c
v3: Jani
    Move the abstraction to intel_bios.
v4: Jani
    Rename tp*_wakeup_time to have "us" suffix.
    For values outside range[0-3],default to max 2500us.
    Old decimal value was wake up time in multiples of 100us.
v5: Jani and Rodrigo
    Handle option 2 in default condition.
    Print oustide range value.
    For negetive values default to 2500us.
v6: Jani
    Handle default first and then fall through for case 2.
v7: Rodrigo
    Apply this change for IS_GEN9_BC and vbt version > 209
v8: Puthik
    Add new function vbt_psr_to_us.
v9: Jani
    Change to v7 version as it's more readable.
    DK
    add comment /*fall through*/ after case2.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Puthikorn Voravootivat <puthik@chromium.org>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526981243-2745-1-git-send-email-vathsala.nagaraju@intel.com
2018-05-24 16:03:49 +03:00
Ville Syrjälä
59462a00cc drm/i915: Eliminate the unused dev_priv->vbt.lvds_vbt
dev_priv->vbt.lvds_vbt is set but never actually used. Kill it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508124136.10969-3-ville.syrjala@linux.intel.com
2018-05-22 15:52:35 +03:00
Ville Syrjälä
5255e2f8d1 drm/i915: Replace vbt edp.support with int_lvds_support
Replace dev_priv->vbt.edp.support with
dev_priv->vbt.int_lvds_support. We'll want to extend its
use beyond the LVDS vs. eDP case in the future.

v2: Nuke the edp.support from parse_edp() (Jani)
    Only clear int_lvds_support for gen5+ to preserve
    the current behaviour (Jani)

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508140814.20105-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2018-05-22 15:50:40 +03:00
Dhinakaran Pandiyan
2bdd045e3a drm/i915/psr: Check if VBT says PSR can be enabled.
Driver features data block has a boolean flag for PSR, use this to decide
whether PSR should be enabled on a platform. The module parameter can
still be used to override this.

Note: The feature currently remains disabled by default for all platforms
irrespective of what VBT says.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509003524.3199-1-dhinakaran.pandiyan@intel.com
2018-05-09 05:34:20 -07:00
Jani Nikula
e53a105839 drm/i915/bios: reduce the scope of some local variables in parse_ddi_port()
No functional changes.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180411131519.9091-2-jani.nikula@intel.com
2018-04-12 11:22:46 +03:00
Jani Nikula
f212bf9abe drm/i915/bios: filter out invalid DDC pins from VBT child devices
The VBT contains the DDC pin to use for specific ports. Alas, sometimes
the field appears to contain bogus data, and while we check for it later
on in intel_gmbus_get_adapter() we fail to check the returned NULL on
errors. Oops results.

The simplest approach seems to be to catch and ignore the bogus DDC pins
already at the VBT parsing phase, reverting to fixed per port default
pins. This doesn't guarantee display working, but at least it prevents
the oops. And we continue to be fuzzed by VBT.

One affected machine is Dell Latitude 5590 where a BIOS upgrade added
invalid DDC pins.

Typical backtrace:

[   35.461411] WARN_ON(!intel_gmbus_is_valid_pin(dev_priv, pin))
[   35.461432] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915]
[   35.461437] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx
[   35.461445] CPU: 6 PID: 411 Comm: kworker/u16:2 Not tainted 4.16.0-rc7.x64-g1cda370ffded #1
[   35.461447] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018
[   35.461450] Workqueue: events_unbound async_run_entry_fn
[   35.461465] RIP: 0010:intel_gmbus_get_adapter+0x32/0x37 [i915]
[   35.461467] RSP: 0018:ffff9b4e43d47c40 EFLAGS: 00010286
[   35.461469] RAX: 0000000000000000 RBX: ffff98f90639f800 RCX: ffffffffae051960
[   35.461471] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000246
[   35.461472] RBP: ffff98f905410000 R08: 0000004d062a83f6 R09: 00000000000003bd
[   35.461474] R10: 0000000000000031 R11: ffffffffad4eda58 R12: ffff98f905410000
[   35.461475] R13: ffff98f9064c1000 R14: ffff9b4e43d47cf0 R15: ffff98f905410000
[   35.461477] FS:  0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000
[   35.461479] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   35.461481] CR2: 00007f5682359008 CR3: 00000001b700c005 CR4: 00000000003606e0
[   35.461483] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   35.461484] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   35.461486] Call Trace:
[   35.461501]  intel_hdmi_set_edid+0x37/0x27f [i915]
[   35.461515]  intel_hdmi_detect+0x7c/0x97 [i915]
[   35.461518]  drm_helper_probe_single_connector_modes+0xe1/0x6c0
[   35.461521]  drm_setup_crtcs+0x129/0xa6a
[   35.461523]  ? __switch_to_asm+0x34/0x70
[   35.461525]  ? __switch_to_asm+0x34/0x70
[   35.461527]  ? __switch_to_asm+0x40/0x70
[   35.461528]  ? __switch_to_asm+0x34/0x70
[   35.461529]  ? __switch_to_asm+0x40/0x70
[   35.461531]  ? __switch_to_asm+0x34/0x70
[   35.461532]  ? __switch_to_asm+0x40/0x70
[   35.461534]  ? __switch_to_asm+0x34/0x70
[   35.461536]  __drm_fb_helper_initial_config_and_unlock+0x34/0x46f
[   35.461538]  ? __switch_to_asm+0x40/0x70
[   35.461541]  ? _cond_resched+0x10/0x33
[   35.461557]  intel_fbdev_initial_config+0xf/0x1c [i915]
[   35.461560]  async_run_entry_fn+0x2e/0xf5
[   35.461563]  process_one_work+0x15b/0x364
[   35.461565]  worker_thread+0x2c/0x3a0
[   35.461567]  ? process_one_work+0x364/0x364
[   35.461568]  kthread+0x10c/0x122
[   35.461570]  ? _kthread_create_on_node+0x5d/0x5d
[   35.461572]  ret_from_fork+0x35/0x40
[   35.461574] Code: 74 16 89 f6 48 8d 04 b6 48 c1 e0 05 48 29 f0 48 8d 84 c7 e8 11 00 00 c3 48 c7 c6 b0 19 1e c0 48 c7 c7 64 8a 1c c0 e8 47 88 ed ec <0f> 0b 31 c0 c3 8b 87 a4 04 00 00 80 e4 fc 09 c6 89 b7 a4 04 00
[   35.461604] WARNING: CPU: 6 PID: 411 at drivers/gpu/drm/i915/intel_i2c.c:844 intel_gmbus_get_adapter+0x32/0x37 [i915]
[   35.461606] ---[ end trace 4fe1e63e2dd93373 ]---
[   35.461609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[   35.461613] IP: i2c_transfer+0x4/0x86
[   35.461614] PGD 0 P4D 0
[   35.461616] Oops: 0000 [#1] SMP PTI
[   35.461618] Modules linked in: i915 ahci libahci dm_snapshot dm_bufio dm_raid raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx
[   35.461624] CPU: 6 PID: 411 Comm: kworker/u16:2 Tainted: G        W        4.16.0-rc7.x64-g1cda370ffded #1
[   35.461625] Hardware name: Dell Inc. Latitude 5590/0MM81M, BIOS 1.1.9 03/13/2018
[   35.461628] Workqueue: events_unbound async_run_entry_fn
[   35.461630] RIP: 0010:i2c_transfer+0x4/0x86
[   35.461631] RSP: 0018:ffff9b4e43d47b30 EFLAGS: 00010246
[   35.461633] RAX: ffff9b4e43d47b6e RBX: 0000000000000005 RCX: 0000000000000001
[   35.461635] RDX: 0000000000000002 RSI: ffff9b4e43d47b80 RDI: 0000000000000000
[   35.461636] RBP: ffff9b4e43d47bd8 R08: 0000004d062a83f6 R09: 00000000000003bd
[   35.461638] R10: 0000000000000031 R11: ffffffffad4eda58 R12: 0000000000000002
[   35.461639] R13: 0000000000000001 R14: ffff9b4e43d47b6f R15: ffff9b4e43d47c07
[   35.461641] FS:  0000000000000000(0000) GS:ffff98f92e580000(0000) knlGS:0000000000000000
[   35.461643] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   35.461645] CR2: 0000000000000010 CR3: 00000001b700c005 CR4: 00000000003606e0
[   35.461646] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   35.461647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   35.461649] Call Trace:
[   35.461652]  drm_do_probe_ddc_edid+0xb3/0x128
[   35.461654]  drm_get_edid+0xe5/0x38d
[   35.461669]  intel_hdmi_set_edid+0x45/0x27f [i915]
[   35.461684]  intel_hdmi_detect+0x7c/0x97 [i915]
[   35.461687]  drm_helper_probe_single_connector_modes+0xe1/0x6c0
[   35.461689]  drm_setup_crtcs+0x129/0xa6a
[   35.461691]  ? __switch_to_asm+0x34/0x70
[   35.461693]  ? __switch_to_asm+0x34/0x70
[   35.461694]  ? __switch_to_asm+0x40/0x70
[   35.461696]  ? __switch_to_asm+0x34/0x70
[   35.461697]  ? __switch_to_asm+0x40/0x70
[   35.461698]  ? __switch_to_asm+0x34/0x70
[   35.461700]  ? __switch_to_asm+0x40/0x70
[   35.461701]  ? __switch_to_asm+0x34/0x70
[   35.461703]  __drm_fb_helper_initial_config_and_unlock+0x34/0x46f
[   35.461705]  ? __switch_to_asm+0x40/0x70
[   35.461707]  ? _cond_resched+0x10/0x33
[   35.461724]  intel_fbdev_initial_config+0xf/0x1c [i915]
[   35.461727]  async_run_entry_fn+0x2e/0xf5
[   35.461729]  process_one_work+0x15b/0x364
[   35.461731]  worker_thread+0x2c/0x3a0
[   35.461733]  ? process_one_work+0x364/0x364
[   35.461734]  kthread+0x10c/0x122
[   35.461736]  ? _kthread_create_on_node+0x5d/0x5d
[   35.461738]  ret_from_fork+0x35/0x40
[   35.461739] Code: 5c fa e1 ad 48 89 df e8 ea fb ff ff e9 2a ff ff ff 0f 1f 44 00 00 31 c0 e9 43 fd ff ff 31 c0 45 31 e4 e9 c5 fd ff ff 41 54 55 53 <48> 8b 47 10 48 83 78 10 00 74 70 41 89 d4 48 89 f5 48 89 fb 65
[   35.461756] RIP: i2c_transfer+0x4/0x86 RSP: ffff9b4e43d47b30
[   35.461757] CR2: 0000000000000010
[   35.461759] ---[ end trace 4fe1e63e2dd93374 ]---

Based on a patch by Fei Li.

v2: s/reverting/sticking/ (Chris)

Cc: stable@vger.kernel.org
Cc: Fei Li <fei.li@intel.com>
Co-developed-by: Fei Li <fei.li@intel.com>
Reported-by: Pavel Nakonechnyi <zorg1331@gmail.com>
Reported-and-tested-by: Seweryn Kokot <sewkokot@gmail.com>
Reported-and-tested-by: Laszlo Valko <valko@linux.karinthy.hu>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105549
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105961
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180411131519.9091-1-jani.nikula@intel.com
2018-04-12 11:22:07 +03:00
Jani Nikula
f3aa929c59 drm/i915/bios: remove duplicated code
Apparently caused by a merge fail at some point. Due to the nature of
the duplicated block, the second one will have no effect, and there's no
need to backport.

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180410091248.1454-1-jani.nikula@intel.com
2018-04-11 16:06:17 +03:00
Hans de Goede
fb38e7ade9 drm/i915: Fix DSI panels with v1 MIPI sequences without a DEASSERT sequence v3
So far models of the Dell Venue 8 Pro, with a panel with MIPI panel
index = 3, one of which has been kindly provided to me by Jan Brummer,
where not working with the i915 driver, giving a black screen on the
first modeset.

The problem with at least these Dells is that their VBT defines a MIPI
ASSERT sequence, but not a DEASSERT sequence. Instead they DEASSERT the
reset in their INIT_OTP sequence, but the deassert must be done before
calling intel_dsi_device_ready(), so that is too late.

Simply doing the INIT_OTP sequence earlier is not enough to fix this,
because the INIT_OTP sequence also sends various MIPI packets to the
panel, which can only happen after calling intel_dsi_device_ready().

This commit fixes this by splitting the INIT_OTP sequence into everything
before the first DSI packet and everything else, including the first DSI
packet. The first part (everything before the first DSI packet) is then
used as deassert sequence.

Changed in v2:
-Split the init OTP sequence into a deassert reset and the actual init
 OTP sequence, instead of calling it earlier and then having the first
 mipi_exec_send_packet() call call intel_dsi_device_ready().

Changes in v3:
-Move the whole shebang to intel_bios.c

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82880
References: https://bugs.freedesktop.org/show_bug.cgi?id=101205
Cc: Jan-Michael Brummer <jan.brummer@tabos.org>
Reported-by: Jan-Michael Brummer <jan.brummer@tabos.org>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214082151.25015-3-hdegoede@redhat.com
2018-02-14 11:38:12 +01:00
Hans de Goede
e1b86c85f6 drm/i915: Free memdup-ed DSI VBT data structures on driver_unload
Make intel_bios_cleanup function free the DSI VBT data structures which
are memdup-ed by parse_mipi_config() and parse_mipi_sequence().

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214082151.25015-2-hdegoede@redhat.com
2018-02-14 11:38:11 +01:00
Hans de Goede
785f076b3b drm/i915: Add intel_bios_cleanup() function
Add an intel_bios_cleanup() function to act as counterpart of
intel_bios_init() and move the cleanup of vbt related resources there,
putting it in the same file as the allocation.

Changed in v2:
-While touching the code anyways, remove the unnecessary:
 if (dev_priv->vbt.child_dev) done before kfree(dev_priv->vbt.child_dev)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214082151.25015-1-hdegoede@redhat.com
2018-02-14 11:38:10 +01:00
Tvrtko Ursulin
c56b89f16d drm/i915: Use INTEL_GEN everywhere
Coccinelle patch:

 @@
 identifier p;
 @@
 -INTEL_INFO(p)->gen
 +INTEL_GEN(p)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208130606.15556-12-tvrtko.ursulin@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180209215847.6660-1-chris@chris-wilson.co.uk
2018-02-09 22:29:02 +00:00
Jani Nikula
99b91bda84 drm/i915/dp: limit DP link rate based on VBT on CNL+
We have the max DP link rate info available in VBT since BDB version
216, included in child device config since commit c4fb60b9ab
("drm/i915/bios: add DP max link rate to VBT child device
struct"). Parse it and use it.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a8b1364d1f2394fba3062b6ad11b474744ea4366.1517482774.git.jani.nikula@intel.com
2018-02-02 09:50:51 +02:00
Rodrigo Vivi
3393ce1ed8 drm/i915/cnp: Properly handle VBT ddc pin out of bounds.
If the table result is out of bounds on the array map
there is something really wrong with VBT pin so we don't
return that vbt_pin, but only return 0 instead.

This basically reverts commit 'a8e6f3888b05 ("drm/i915/cnp:
Ignore VBT request for know invalid DDC pin.")'

Also this properly fixes commit 9c3b2689d0 ("drm/i915/cnl:
Map VBT DDC Pin to BSpec DDC Pin.")

v2: Do in a way that we don't break other platforms. (Jani)

v3: Keep debug message (Jani)

v4: Don't mess with 0 mapping was noticed by Jani and
    addressed with a simple solution suggested by Lucas
    that makes this even simpler.

Fixes: a8e6f3888b ("drm/i915/cnp: Ignore VBT request for know invalid DDC pin.")
Fixes: 9c3b2689d0 ("drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin.")
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Kai Heng Feng <kai.heng.feng@canonical.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125222524.22059-1-rodrigo.vivi@intel.com
2018-01-29 14:11:56 -08:00
Rodrigo Vivi
a8e6f3888b drm/i915/cnp: Ignore VBT request for know invalid DDC pin.
Let's ignore VBT request if the pin is clearly wrong.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104139
Cc: Kai Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123174050.4261-1-rodrigo.vivi@intel.com
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
2018-01-23 15:17:00 -08:00
Rodrigo Vivi
841b5ed7aa drm/i915/cnl: Add Port F definition.
Some Cannonlake SKUs will come with a full split between
port A and port E. This will be called port F although it
is not a 6th port, but only a split.

Note this patch alone is not sufficient for port F enabling,
it's just the first step.

v2: Fix size of dvo_ports found by Ander.
v3: Adding missing cases from intel_bios.c for Port_F
v4: Adding other missing cases and fix the commit message.
v5: Rebase on top of display headers rework.
v6 (from Paulo): improve commit message, bikeshed bit definitions.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-2-paulo.r.zanoni@intel.com
2018-01-19 17:51:35 -02:00
Jani Nikula
c4fb60b9ab drm/i915/bios: add DP max link rate to VBT child device struct
Update VBT defs to reflect revision 216. While at it, default the
expected child device struct size to sizeof the size rather than a
hardcoded value.

v2: Fix bit order (David)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180118153310.32437-1-jani.nikula@intel.com
2018-01-18 12:13:40 -08:00
Rodrigo Vivi
176d5325d1 Merge airlied/drm-next into drm-intel-next-queued
Catchup with upstream.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-11-14 07:43:00 -08:00
Dave Airlie
36a5fdf76d This time really the last i915 batch for v4.15:
- PSR state tracking in crtc state (Ville)
 - Fix eviction when the GGTT is idle but full (Chris)
 - BDW DP aux channel timeout fix (James)
 - LSPCON detection fixes (Shashank)
 - Use for_each_pipe to iterate over pipes (Mika Kahola)
 - Replace *_reference/unreference() or *_ref/unref with _get/put() (Harsha)
 - Refactoring and preparation for DDI encoder type cleanup (Ville)
 - Broadwell DDI FDI buf translation fix (Chris)
 - Read CSB and CSB write pointer from HWSP in GVT-g VM if available (Weinan)
 - GuC/HuC firmware loader refactoring (Michal)
 - Make shrinking more effective and not stall so much (Chris)
 - Cannonlake PLL fixes (Rodrigo)
 - DP MST connector error propagation fixes (James)
 - Convert timers to use timer_setup (Kees Cook)
 - Skylake plane enable/disable unification (Juha-Pekka)
 - Fix to actually free driver internal objects when requested (Chris)
 - DDI buf trans refactoring (Ville)
 - Skip waking the device to service pwrite (Chris)
 - Improve DSI VBT backlight parsing abstraction (Madhav)
 - Cannonlake VBT DDC pin mapping fix (Rodrigo)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEFWWmW3ewYy4RJOWc05gHnSar7m8FAlntvmAACgkQ05gHnSar
 7m+W6g//bA7dZdhGfX01Ad/BvRR0gCays9LWyH5DZX5o34kEX5JgPZjesv+k2wmR
 ecpD9s29qXnnkDeQUU/oO0fd/K1/6i2/EyJuIHpe3j1zASRzMqUwZGz05ot2iyYG
 uS7l92P+QwCdKYWbKEn8gRzVwbmr3HZ4Hg5HVK81jQodObM9Gccp/Yk1olOm9WvN
 h/+uvBfKlDjBnHw0IrFvFq+woUIdJ1bzAQ4g+/QRdPWlE9rDa0qvGMvvar90tPcA
 FHGB71gaTZdAVtlF4XfQ1xOn5SmGJhc6NihdB00yR3H0/UVUClD9zwx4kLwYHD7P
 +fkKPFFhuDqzWLQonJW57ijBgFp1ygLnHg59ttENAQuwiZj9prOIdkduSvHEOWva
 g2DjeZ1csM79MfsvTOeV4MzY38q5NFBOixK6EsPurkyyFWE34L2gCKN5TBeNYsUc
 yuSZAmh92JcDZV8P2SlNHx09qjjmG48FrDr7fkWG/2pFBXbIpHiltF63q20HHfBe
 D3h7QgCipdGXJ/mk7Z8tpWrkn+ALddyShtQqAiTEHl7BGpdNFHECWl93LWFdqKfC
 rLolhJui936qJhiA6+fZqFEUtvgb7HHJPTQE5EOgu/15/H+DylPE5jFdHvH/P07v
 yqi6N6SLVTTxvudqv75GyKh53i9bzSrWHldCAacWmDtUGkEyAvM=
 =fQeu
 -----END PGP SIGNATURE-----

Merge tag 'drm-intel-next-2017-10-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

This time really the last i915 batch for v4.15:

- PSR state tracking in crtc state (Ville)
- Fix eviction when the GGTT is idle but full (Chris)
- BDW DP aux channel timeout fix (James)
- LSPCON detection fixes (Shashank)
- Use for_each_pipe to iterate over pipes (Mika Kahola)
- Replace *_reference/unreference() or *_ref/unref with _get/put() (Harsha)
- Refactoring and preparation for DDI encoder type cleanup (Ville)
- Broadwell DDI FDI buf translation fix (Chris)
- Read CSB and CSB write pointer from HWSP in GVT-g VM if available (Weinan)
- GuC/HuC firmware loader refactoring (Michal)
- Make shrinking more effective and not stall so much (Chris)
- Cannonlake PLL fixes (Rodrigo)
- DP MST connector error propagation fixes (James)
- Convert timers to use timer_setup (Kees Cook)
- Skylake plane enable/disable unification (Juha-Pekka)
- Fix to actually free driver internal objects when requested (Chris)
- DDI buf trans refactoring (Ville)
- Skip waking the device to service pwrite (Chris)
- Improve DSI VBT backlight parsing abstraction (Madhav)
- Cannonlake VBT DDC pin mapping fix (Rodrigo)

* tag 'drm-intel-next-2017-10-23' of git://anongit.freedesktop.org/drm/drm-intel: (87 commits)
  drm/i915: Update DRIVER_DATE to 20171023
  drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin.
  drm/i915: Let's use more enum intel_dpll_id pll_id.
  drm/i915: Use existing DSI backlight ports info
  drm/i915: Parse DSI backlight/cabc ports.
  drm/i915: Skip waking the device to service pwrite
  drm/i915/crt: split compute_config hook by platforms
  drm/i915: remove g4x lowfreq_avail and has_pipe_cxsr
  drm/i915: Drop the redundant hdmi prefix/suffix from a lot of variables
  drm/i915: Unify error handling for missing DDI buf trans tables
  drm/i915: Centralize the SKL DDI A/E vs. B/C/D buf trans handling
  drm/i915: Kill off the BXT buf_trans default_index
  drm/i915: Pass encoder type to cnl_ddi_vswing_sequence() explicitly
  drm/i915: Integrate BXT into intel_ddi_dp_voltage_max()
  drm/i915: Pass the level to intel_prepare_hdmi_ddi_buffers()
  drm/i915: Pass the encoder type explicitly to skl_set_iboost()
  drm/i915: Extract intel_ddi_get_buf_trans_hdmi()
  drm/i915: Relocate intel_ddi_get_buf_trans_*() functions
  drm/i915: Flush the idle-worker for debugfs/i915_drop_caches
  drm/i915: adjust get_crtc_fence_y_offset() to use base.y instead of crtc.y
  ...
2017-11-04 05:43:44 +10:00
Dave Airlie
7a88cbd8d6 Linux 4.14-rc7
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJZ9kEFAAoJEHm+PkMAQRiGw6wH/0j197qyGd0hkVFMJO6LAgN3
 KQWS4nZ5BkVDocwv0RVnUJTtXqU1eozFgdVEtSoaFXpzlHGuptR2Tau9efDCJ7w3
 /utZxqvhGebZd2T+j+/o/LE8BRQxhADBNJq2D/o0WNt8ecxuG0GIkhkEYt/o3z1v
 /sxlwVwzXB7Dc/h1WcgGJG7cS6L9KzzAzGAS/iNvdFrPOygHBv8c0MxVZIiBIeeK
 1nZdyvbyM8uenSyG+prGt9ENrqXZxxfwUxIchi2V7A9m1WmD5zijNkf1JCWji/O+
 UsA1auxna7MwoxjxqZuGm4MlKOwZ+8xutk4JGgc+aP/ulndJbJYu+4op/3vaFBM=
 =Mhx+
 -----END PGP SIGNATURE-----

Backmerge tag 'v4.14-rc7' into drm-next

Linux 4.14-rc7

Requested by Ben Skeggs for nouveau to avoid major conflicts,
and things were getting a bit conflicty already, esp around amdgpu
reverts.
2017-11-02 12:40:41 +10:00
Ville Syrjälä
d6038611aa drm/i915: Parse max HDMI TMDS clock from VBT
Starting from version 204 VBT can specify the max TMDS clock we are
allowed to use with HDMI ports. Parse that information and take it
into account when filtering modes and computing a crtc state.

Also take the opportunity to sort the platform check if ladder
from new to old.

v2: Add defines for the values into intel_vbt_defs.h (Jani)
    Don't fall back to 0 silently for unknown values (Jani)
    Skip the debug print for the 0 case (Jani)

Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171030145702.23662-1-ville.syrjala@linux.intel.com
2017-10-30 19:48:11 +02:00
Rodrigo Vivi
9c3b2689d0 drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin.
Starting on CNL we now need to map VBT DDC Pin to
BSPec DDC Pin values. Not a direct translation anymore.

According to VBT
Block 2 (General Bytes Definition)
DDC Bus

+----------+-----------+--------------------+
| DDI Type | VBT Value | Bspec Mapped Value |
+----------+-----------+--------------------+
| DDI-B    | 0x1       | 0x1                |
| DDI-C    | 0x2       | 0x2                |
| DDI-D    | 0x3       | 0x4                |
| DDI-F    | 0x4       | 0x3                |
+----------+-----------+--------------------+

v2: Move defines to a better place.
    This is actually CNL_PCH not CNL only.
v3: Accepting Ville's suggestions: enums and array to
    to make this future proof.
v4: Protect the array access as Ville suggested.
    Also accepting all Jani's suggestions:
    	      - use already defined gmbus pin definitions.
	      - use map_ddc_pin for disambiguation.
	      - Add /* sic */ comment on inverted values
	      	so people can easily see it it nos a mistake
		we have the map 3 -> 4 and 4 -> 3 :/

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171020172641.16029-1-rodrigo.vivi@intel.com
2017-10-20 16:18:03 -07:00
Madhav Chauhan
6a2f0641d3 drm/i915: Use existing DSI backlight ports info
This patch re-use already parsed DSI backlight/cabc ports
info for saving it inside struct intel_dsi rather than
parsing it at the time of DSI initialization.

V2: Remove backlight and cabc variable initialization (Jani N).

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507898700-20016-2-git-send-email-madhav.chauhan@intel.com
2017-10-20 11:28:49 +03:00
Madhav Chauhan
46e5832014 drm/i915: Parse DSI backlight/cabc ports.
This patch parse DSI backlight/cabc ports info from
VBT and save them inside local structure. This saved info
can be directly used while initializing DSI for different
platforms instead of parsing for each platform.

V2: Changes:
    - Typo fix in commit message.
    - Move up newly added port variables (Jani N)
    - Remove redundant initialization (Jani N)
    - Don't parse CABC ports if not supported (Jani N)
V3: Patch restructure (Suggested by Jani N)

Credits-to: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507898700-20016-1-git-send-email-madhav.chauhan@intel.com
2017-10-20 11:28:43 +03:00
Jani Nikula
ea850f64c2 drm/i915/bios: parse DDI ports also for CHV for HDMI DDC pin and DP AUX channel
While technically CHV isn't DDI, we do look at the VBT based DDI port
info for HDMI DDC pin and DP AUX channel. (We call these "alternate",
but they're really just something that aren't platform defaults.)

In commit e4ab73a132 ("drm/i915: Respect alternate_ddc_pin for all DDI
ports") Ville writes, "IIRC there may be CHV system that might actually
need this."

I'm not sure why there couldn't be even more platforms that need this,
but start conservative, and parse the info for CHV in addition to DDI.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100553
Reported-by: Marek Wilczewski <mw@3cte.pl>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d0815082cb98487618429b62414854137049b888.1506586821.git.jani.nikula@intel.com
(cherry picked from commit 348e4058eb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-10-11 10:32:57 -07:00
Jani Nikula
0ead5f81d4 drm/i915/bios: don't pass bdb to parsers that don't parse VBT directly
Hint that you're not supposed to look at VBT in these functions.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b82c326be8c796a70bdc2bd1c479bbb6159f5cb0.1506586821.git.jani.nikula@intel.com
2017-10-10 09:06:33 +03:00
Jani Nikula
0ebdabe612 drm/i915/bios: parse SDVO device mapping from pre-parsed child devices
We parse and store the child devices in
parse_general_definitions(). There is no need to parse the VBT block
again for SDVO device mapping. Do the same as we do in
parse_ddi_ports().

We no longer have access to child device size at this stage, but we also
don't need to worry about reading past the child device anymore. Instead
of a child device size check, do a mild optimization by limiting the
parsing to gens 3 through 7.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c918d4173dd38a165295f1270cb16c2c01bd8cd1.1506586821.git.jani.nikula@intel.com
2017-10-10 09:06:17 +03:00
Jani Nikula
b3ca1f43b2 drm/i915/bios: merge parse_device_mapping() into parse_general_definitions()
They're both parsing the same block, and there's no need for them to be
split. The former also benefits from the range checks in the latter.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/64a292606ecbb0b8602e6c5523c5746573ec3944.1506586821.git.jani.nikula@intel.com
2017-10-10 09:06:10 +03:00
Jani Nikula
53f6b2436e drm/i915/bios: cleanup comments and useless return
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4a95fb9d23d980830e3158d3c57258e6539965ce.1506586821.git.jani.nikula@intel.com
2017-10-10 09:06:02 +03:00
Jani Nikula
127704f547 drm/i915/bios: remove an unnecessary temp variable
Prepare for merging parse_device_mapping() into
parse_general_definitions(). No functional changes.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f1c3621e2622f4debdfb4a2f5c1959845754ac04.1506586821.git.jani.nikula@intel.com
2017-10-10 09:05:54 +03:00
Jani Nikula
2d936f1cf7 drm/i915/bios: don't initialize fields based on vbt version
In theory, these might clobber information for older VBT versions.

We might have to store the BDB version for later parsing, but currently
all code accessing these fields will only use them on newer platforms
with new enough BDB versions.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0232d9cb258e8f83c4180cdb8aad1459a312ec2a.1506586821.git.jani.nikula@intel.com
2017-10-10 09:05:44 +03:00
Jani Nikula
a87145ca56 drm/i915/bios: refactor parse general definitions
Early return on failures. Rename the variable for later merging with
parse_device_mappings().

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/785abb904a572752fec68d90d34efeb67774dc1f.1506586821.git.jani.nikula@intel.com
2017-10-10 09:05:31 +03:00
Jani Nikula
348e4058eb drm/i915/bios: parse DDI ports also for CHV for HDMI DDC pin and DP AUX channel
While technically CHV isn't DDI, we do look at the VBT based DDI port
info for HDMI DDC pin and DP AUX channel. (We call these "alternate",
but they're really just something that aren't platform defaults.)

In commit e4ab73a132 ("drm/i915: Respect alternate_ddc_pin for all DDI
ports") Ville writes, "IIRC there may be CHV system that might actually
need this."

I'm not sure why there couldn't be even more platforms that need this,
but start conservative, and parse the info for CHV in addition to DDI.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100553
Reported-by: Marek Wilczewski <mw@3cte.pl>
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d0815082cb98487618429b62414854137049b888.1506586821.git.jani.nikula@intel.com
2017-10-10 09:05:11 +03:00
Jani Nikula
2ba7d7e043 drm/i915/bios: ignore HDMI on port A
The hardware state readout oopses after several warnings when trying to
use HDMI on port A, if such a combination is configured in VBT. Filter
the combo out already at the VBT parsing phase.

v2: also ignore DVI (Ville)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102889
Cc: stable@vger.kernel.org
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Daniel Drake <dan@reactivated.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170921141920.18172-1-jani.nikula@intel.com
(cherry picked from commit d27ffc1d00)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2017-09-26 09:14:28 -07:00
Jani Nikula
d27ffc1d00 drm/i915/bios: ignore HDMI on port A
The hardware state readout oopses after several warnings when trying to
use HDMI on port A, if such a combination is configured in VBT. Filter
the combo out already at the VBT parsing phase.

v2: also ignore DVI (Ville)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102889
Cc: stable@vger.kernel.org
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Daniel Drake <dan@reactivated.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170921141920.18172-1-jani.nikula@intel.com
2017-09-25 10:49:55 +03:00
Michal Wajdeczko
4f044a88a8 drm/i915: Rename global i915 to i915_modparams
Our global struct with params is named exactly the same way
as new preferred name for the drm_i915_private function parameter.
To avoid such name reuse lets use different name for the global.

v5: pure rename
v6: fix

Credits-to: Coccinelle

@@
identifier n;
@@
(
-	i915.n
+	i915_modparams.n
)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919193846.38060-1-michal.wajdeczko@intel.com
2017-09-22 14:50:36 +03:00
Jani Nikula
058727ee8d drm/i915/bios: amend edp block based on intel_vbt_decode
Copy over some fields defined in the intel_vbt_decode tool. No
functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8a42f0e4d1bba2679e9cd78da1e31b66133d562f.1503670197.git.jani.nikula@intel.com
2017-08-28 11:04:24 +03:00
Jani Nikula
f22bb35856 drm/i915/bios: split up iboost to hdmi and dp bitfields
This is according to the style all over the place. No functional
changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cf5f0e5d10851db3796e632836d23551f59cc412.1503670197.git.jani.nikula@intel.com
2017-08-28 11:01:57 +03:00
Jani Nikula
e192839e3e drm/i915/bios: drop the rest of the p_ prefixes from pointers
Not really kernel style, and sticks out like a sore thumb. No functional
changes.

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/76b4f643e727bae39acd6f73d085f718eb012235.1503600621.git.jani.nikula@intel.com
2017-08-25 16:18:53 +03:00
Jani Nikula
21907e722b drm/i915/bios: throw away struct old_child_dev_config
The old_child_dev_config struct is no longer needed except for its size;
replace with a macro. No functional change.

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4bfa6e45fecd33af797ec218635504ec8a09f788.1503600621.git.jani.nikula@intel.com
2017-08-25 16:18:28 +03:00
Jani Nikula
cc9985893a drm/i915/bios: throw away high level child device union
All the child device config fields, including legacy, are now available
in the same struct, so use it for everything.

As this change touches plenty of code with "p_child", rename them to
"child" while at it. Also do some simple unification and constification
where not intrusive. This in the name of avoiding extra cleanup churn
for the same lines as here.

No functional changes.

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/103300a9ae8629624619fc8df2c533e745cc5a78.1503600621.git.jani.nikula@intel.com
2017-08-25 16:18:20 +03:00
Jani Nikula
d58107f984 drm/i915/bios: remove the raw version of child device config
Convert the only user of the raw field, switching to the recently added
struct fields. No functional changes.

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/83e6a2058553a43e0d08a49df1f86821f38b206b.1503600621.git.jani.nikula@intel.com
2017-08-25 16:18:07 +03:00
Jani Nikula
b5273d7275 drm/i915/vbt: ignore extraneous child devices for a port
Ever since we've parsed VBT child devices, starting from 6acab15a7b
("drm/i915: use the HDMI DDI buffer translations from VBT"), we've
ignored the child device information if more than one child device
references the same port. The rationale for this seems lost in time.

Since commit 311a20949f ("drm/i915: don't init DP or HDMI when not
supported by DDI port") we started using this information more to skip
HDMI/DP init if the port wasn't there per VBT child devices. However, at
the same time it added port defaults without further explanation.

Thus, if the child device info was skipped due to multiple child devices
referencing the same port, the device info would be retrieved from the
somewhat arbitrary defaults.

Finally, when commit bb1d132935 ("drm/i915/vbt: split out defaults
that are set when there is no VBT") stopped initializing the defaults
whenever VBT is present, thus trusting the VBT more, we stopped
initializing ports which were referenced by more than one child device.

Apparently at least Asus UX305UA, UX305U, and UX306U laptops have VBT
child device blocks which cause this behaviour. Arguably they were
shipped with a broken VBT.

Relax the rules for multiple references to the same port, and use the
first child device info to reference a port. Retain the logic to debug
log about this, though.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101745
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196233
Fixes: bb1d132935 ("drm/i915/vbt: split out defaults that are set when there is no VBT")
Tested-by: Oliver Weißbarth <mail@oweissbarth.de>
Reported-by: Oliver Weißbarth <mail@oweissbarth.de>
Reported-by: Didier G <didierg-divers@orange.fr>
Reported-by: Giles Anderson <agander@gmail.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: <stable@vger.kernel.org> # v4.12+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170811113907.6716-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-08-16 17:40:37 +03:00
Rodrigo Vivi
75be7756bc drm/i915/cnl: Don't trust VBT's alternate pin for port D for now.
Cannon Lake's VBT that is currently available for B0 stepping
states that port D uses alternate pin 3 messing up with the
default pin-port mapping table. Using that information we cannot
get HDMI working properly. So for now we don't relly on VBT for
this information.

Cc: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1499375295-6454-1-git-send-email-rodrigo.vivi@intel.com
2017-07-07 09:11:46 -07:00
Jani Nikula
bb1d132935 drm/i915/vbt: split out defaults that are set when there is no VBT
The main thing are the DDI ports. If there's a VBT that says there are
no outputs, we should trust that, and not have semi-random
defaults. Unfortunately, the defaults have resulted in some Chromebooks
without VBT to rely on this behaviour, so we split out the defaults for
the missing VBT case.

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/95c26079ff640d43f53b944f17e9fc356b36daec.1489152288.git.jani.nikula@intel.com
2017-03-14 10:49:13 +02:00
Jani Nikula
665788572c drm/i915/vbt: don't propagate errors from intel_bios_init()
We don't use the error return for anything other than reporting and
logging that there is no VBT. We can pull the logging in the function,
and remove the error status return. Moreover, if we needed the
information for something later on, we'd probably be better off storing
the bit in dev_priv, and using it where it's needed, instead of using
the error return.

While at it, improve the comments.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/438ebbb0d5f0d321c625065b9cc78532a1dab24f.1489152288.git.jani.nikula@intel.com
2017-03-13 11:52:07 +02:00