Needn't to restore the in-context MMIO when SCHEDULE_OUT. Sometimes
with restoring the in-context MMIO, some GPU hang can be observed. So
remove the in-context MMIO restore
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Turns out our skills in decoding the CLKCFG register weren't good
enough. On this particular elk the answer we got was 400 MHz when
in reality the clock was running at 266 MHz, which then caused us
to program a bogus AUX clock divider that caused all AUX communication
to fail.
Sadly the docs are now in bit heaven, so the fix will have to be based
on empirical evidence. Using another elk machine I was able to frob
the FSB frequency from the BIOS and see how it affects the CLKCFG
register. The machine seesm to use a frequency of 266 MHz by default,
and fortunately it still boot even with the 50% CPU overclock that
we get when we bump the FSB up to 400 MHz.
It turns out the actual FSB frequency and the register have no real
link whatsoever. The register value is based on some straps or something,
but fortunately those too can be configured from the BIOS on this board,
although it doesn't seem to respect the settings 100%. In the end I was
able to derive the following relationship:
BIOS FSB / strap | CLKCFG
-------------------------
200 | 0x2
266 | 0x0
333 | 0x4
400 | 0x4
So only the 200 and 400 MHz cases actually match how we're currently
decoding that register. But as the comment next to some of the defines
says, we have been just guessing anyway.
So let's fix things up so that at least the 266 MHz case will work
correctly as that is actually the setting used by both the buggy
machine and my test machine.
The fact that 333 and 400 MHz BIOS settings result in the same register
value is a little disappointing, as that means we can't tell them apart.
However, according to the gmch datasheet for both elk and ctg 400 Mhz is
not even a supported FSB frequency, so I'm going to make the assumption
that we should decode it as 333 MHz instead.
Cc: stable@vger.kernel.org
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100926
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170504181530.6908-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Typically, there is space available within the ring and if not we have
to wait (by definition a slow path). Rearrange the code to reduce the
number of branches and stack size for the hotpath, accomodating a slight
growth for the wait.
v2: Fix the new assert that packets are not larger than the actual ring.
v3: Make the parameters unsigned as well to make usage.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170504130846.4807-3-chris@chris-wilson.co.uk
Some callers immediately want to know the current ring->space after
calling intel_ring_update_space(), which we can freely provide via the
return parameter.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170504130846.4807-2-chris@chris-wilson.co.uk
Use the added helpers to track MST link bandwidth for atomic modesets.
Link bw is acquired in the ->atomic_check() phase when CRTCs are being
enabled with drm_atomic_find_vcpi_slots(). Similarly, link bw is released
during ->atomic_check() with the connector helper callback ->atomic_check()
when CRTCs are disabled.
v6: active_changed does not alter vcpi allocations (Maarten)
v5: Implement connector->atomic_check() in place of atomic_release()
v4: Return an int from intel_dp_mst_atomic_release() (Maarten)
v3:
Handled the case where ->atomic_release() is called more than once
during an atomic_check() for the same state.
v2:
Squashed atomic_release() implementation and caller (Daniel)
Fixed logic for connector-crtc switching case (Daniel)
Fixed logic for suspend-resume case.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Harry Wentland <Harry.wentland@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1493421260-3146-1-git-send-email-dhinakaran.pandiyan@intel.com
Since unifying ringbuffer/execlist submission to use
engine->pin_context, we ensure that the intel_ring is available before
we start constructing the request. We can therefore move the assignment
of the request->ring to the central i915_gem_request_alloc() and not
require it in every engine->request_alloc() callback. Another small step
towards simplification (of the core, but at a cost of handling error
pointers in less important callers of engine->pin_context).
v2: Rearrange a few branches to reduce impact of PTR_ERR() on gcc's code
generation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170504093308.4137-1-chris@chris-wilson.co.uk
Since kmap allows us to block we can pin the pages and use our normal
page lookup routine making the implementation simple, or as some might
say quick and dirty.
Testcase: igt/drv_selftest/dmabuf
Testcase: igt/prime_rw
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503202517.16797-1-chris@chris-wilson.co.uk
-----BEGIN PGP SIGNATURE-----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=UxFF
-----END PGP SIGNATURE-----
Merge tag 'tags/drm-for-v4.12' into drm-intel-next-queued
Backmerge the main drm-next pull to sync up.
Chris also pointed out that
commit ade0b0c965
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Sat Apr 22 09:15:37 2017 +0100
drm/i915: Confirm the request is still active before adding it to the await
is double-applied in the git merge, so make sure we get this right.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Now that everything is in place let's register a PCM device for
each port of the display engine. This will make it possible to
actually output audio to multiple displays at the same time. And
it avoids modesets on unrelated displays from clobbering up the
ELD and whatnot for the display currently doing the playback.
v2: Add a PCM per port instead of per pipe
v3: Fix off by one error with port numbers (Pierre-Louis)
Fix .notify_audio_lpe() prototype (Pierre-Louis)
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-12-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Split the LPE audio platform data into a port specific
chunk and device specific chunk. Eventually we'll have
a port specific chunk for each port, but for now we'll
stick to just one.
We'll also get rid of the intel_hdmi_lpe_audio_eld structure
which doesn't seem to have any real reason to exist.
v2: Organize per port instead of per pipe
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-9-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Shuffle the arguments to intel_lpe_audio_notify() around a bit. Pipe
and port being the most important things, so let's put the first, and
thre rest can come in as is. Also constify the eld argument.
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-8-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
We can determine that the pipe was shut down from pipe<0, so there's
no point in duplicating that information as 'hdmi_connected'.
v2: Use pipe<0 instead of port<0 as we'll want to do per-port
PCM devices later
Initialize pipe to -1 to inidicate inactive initial state
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-7-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
There's no need to distinguish between the DP link rate and HDMI TMDS
clock for the purposes of the LPE audio. Both are actually the same
thing more or less, which is the link symbol clock. So let's just
call the thing ls_clock and simplify the code.
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-6-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
The pending_notify flag in the LPE audio platform data is pointless,
actually unused. So let's kill it off.
v2: Fix typo in patch subject
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-5-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
vlv_display_irq_postinstall() enables the LPE audio interrupts
regardless of whether the LPE audio irq chip has masked/unmasked
them. Also the irqchip masking/unmasking doesn't consider the state
of the display power well or the device, and hence just leads to
dmesg spew when it tries to access the hardware while it's powered
down.
If the current way works, then we don't need to do anything in the
mask/unmask hooks. If it doesn't work, well, then we'd need to properly
track whether the irqchip has masked/unmasked the interrupts when
we enable display interrupts. And the mask/unmask hooks would need
to check whether display interrupts are even enabled before frobbing
with he registers.
So let's just assume the current way works and neuter the mask/unmask
hooks. Also clean up vlv_display_irq_postinstall() a bit and stop
it from trying to unmask/enable the LPE C interrupt on VLV since it
doesn't exist.
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-4-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Not calling pm_runtime_enable() means that runtime PM can't be
enabled at all via sysfs. So we definitely need to call it
from somewhere.
Calling it from the driver seems like a bad idea because it
would have to be paired with a pm_runtime_disable() at driver
unload time, otherwise the core gets upset. Also if there's
no LPE audio driver loaded then we couldn't runtime suspend
i915 either.
So it looks like a better plan is to call it from i915 when
we register the platform device. That seems to match how
pci generally does things. I cargo culted the
pm_runtime_forbid() and pm_runtime_set_active() calls from
pci as well.
The exposed runtime PM API is massive an thorougly misleading, so
I don't actually know if this is how you're supposed to use the API
or not. But it seems to work. I can now runtime suspend i915 again
with or without the LPE audio driver loaded, and reloading the
LPE audio driver also seems to work.
Note that powertop won't auto-tune runtime PM for platform devices,
which is a little annoying. So I'm not sure that leaving runtime
PM in "on" mode by default is the best choice here. But I've left
it like that for now at least.
Also remove the comment about there not being much benefit from
LPE audio runtime PM. Not allowing runtime PM blocks i915 runtime
PM, which will also block s0ix, and that could have a measurable
impact on power consumption.
Cc: stable@vger.kernel.org
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes: 0b6b524f39 ("ALSA: x86: Don't enable runtime PM as default")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427160231.13337-2-ville.syrjala@linux.intel.com
Reviewed-by: Takashi Iwai <tiwai@suse.de>
As we may unwind the requests, even though the request we are awaiting
has a global_seqno that seqno may be revoked during the await and so we
can not reliably use it as a barrier for all future awaits on the same
timeline.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-6-chris@chris-wilson.co.uk
With the addition of the inter-context intel_time.sync map, having a
very similar sync_seqno[] is confusing. Aide the reader by denoting that
this is a pre-allocated array for storing semaphore sync points wrt to
the global seqno.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-5-chris@chris-wilson.co.uk
Track the latest fence waited upon on each context, and only add a new
asynchronous wait if the new fence is more recent than the recorded
fence for that context. This requires us to filter out unordered
timelines, which are noted by DMA_FENCE_NO_CONTEXT. However, in the
absence of a universal identifier, we have to use our own
i915->mm.unordered_timeline token.
v2: Throw around the debug crutches
v3: Inline the likely case of the pre-allocation cache being full.
v4: Drop the pre-allocation support, we can lose the most recent fence
in case of allocation failure -- it just means we may emit more awaits
than strictly necessary but will not break.
v5: Trim allocation size for leaf nodes, they only need an array of u32
not pointers.
v6: Create mock_timeline to tidy selftest writing
v7: s/intel_timeline_sync_get/intel_timeline_sync_is_later/ (Tvrtko)
v8: Prune the stale sync points when we idle.
v9: Include a small benchmark in the kselftests
v10: Separate the idr implementation into its own compartment. (Tvrkto)
v11: Refactor igt_sync kselftests to avoid deep nesting (Tvrkto)
v12: __sync_leaf_idx() to assert that p->height is 0 when checking leaves
v13: kselftests to investigate struct i915_syncmap itself (Tvrtko)
v14: Foray into ascii art graphs
v15: Take into account that the random lookup/insert does 2 prng calls,
not 1, when benchmarking, and use for_each_set_bit() (Tvrtko)
v16: Improved ascii art
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-4-chris@chris-wilson.co.uk
Currently we filter out repeated use of the same timeline in the low
level i915_gem_request_await_request(), after having added the
dependency on the old request. However, we can lift this to
i915_gem_request_await_dma_fence() (before the dependency is added)
using the observation that requests along the same timeline are
explicitly ordered via i915_add_request (along with the dependencies).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-3-chris@chris-wilson.co.uk
By first unwrapping an incoming fence-array into its child fences, we
can simplify the internal branching, and so avoid triggering a potential
bug in the next patch when not squashing the child fences on the same
timeline.
It will also have the advantage of keeping the (top-level) fence arrays
out of any fence/timeline caching since these are unordered timelines
but with a random context id.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-2-chris@chris-wilson.co.uk
2 clflushes on two different objects are not ordered, and so do not
belong to the same timeline (context). Either we use a unique context
for each, or we reserve a special global context to mean unordered.
Ideally, we would reserve 0 to mean unordered (DMA_FENCE_NO_CONTEXT) to
have the same semantics everywhere.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170503093924.5320-1-chris@chris-wilson.co.uk
Replace the handcrafter loop when checking for fifo slots
with atomic wait for. This brings this wait in line with
the other waits on register access. We also get a readable
timeout constraint, so make it to fail after 10ms.
Chris suggested that we should fail silently as the fifo debug
handler, now attached to unclaimed mmio handling, will take care of the
possible errors at later stage.
Note that the decision to wait was changed so that we avoid
allocating the first reserved entry. Nor do we reduce the count
if we fail the wait, removing the possiblity to wrap the
count if the hw fifo returned zero.
v2: remove unclaimed check on timeout (Chris)
v3: use void return (Chris)
References: https://bugs.freedesktop.org/show_bug.cgi?id=100247
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1491493182-31540-1-git-send-email-mika.kuoppala@intel.com
Remove the per-mmio checking of the FIFO debug register into the common
conditional mmio debug handling. Based on patch from Chris Wilson.
v2: postpone warn on fifodbg for unclaimed reg debugs
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
It is safer to setup valid send function after successful GuC
hardware initialization. In addition we prepare placeholder
where we can setup any alternate GuC communication mechanism.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170502103243.54940-1-michal.wajdeczko@intel.com
[ickle: Fixup ENODEV for an impossible error path]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Add intel_irq_fini() for placing the deinitialization code,
starting with freeing dev_priv->l3_parity.remap_info[].
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1493366319-18515-1-git-send-email-joonas.lahtinen@linux.intel.com
drm/i915 and gvt fixes for drm-next/v4.12
* tag 'drm-intel-next-fixes-2017-04-27' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Confirm the request is still active before adding it to the await
drm/i915: Avoid busy-spinning on VLV_GLTC_PW_STATUS mmio
drm/i915/selftests: Allocate inode/file dynamically
drm/i915: Fix system hang with EI UP masked on Haswell
drm/i915: checking for NULL instead of IS_ERR() in mock selftests
drm/i915: Perform link quality check unconditionally during long pulse
drm/i915: Fix use after free in lpe_audio_platdev_destroy()
drm/i915: Use the right mapping_gfp_mask for final shmem allocation
drm/i915: Make legacy cursor updates more unsynced
drm/i915: Apply a cond_resched() to the saturated signaler
drm/i915: Park the signaler before sleeping
drm/i915/gvt: fix a bounds check in ring_id_to_context_switch_event()
drm/i915/gvt: Fix PTE write flush for taking runtime pm properly
drm/i915/gvt: remove some debug messages in scheduler timer handler
drm/i915/gvt: add mmio init for virtual display
drm/i915/gvt: use directly assignment for structure copying
drm/i915/gvt: remove redundant ring id check which cause significant CPU misprediction
drm/i915/gvt: remove redundant platform check for mocs load/restore
drm/i915/gvt: Align render mmio list to cacheline
drm/i915/gvt: cleanup some too chatty scheduler message
The sequence in glk_dsi_device_ready() enters ULPS then waits until it is
*not* active to then disable it. The correct sequence according to the
spec is to enter ULPS then wait until the GLK_ULPS_NOT_ACTIVE bit is
zero, i.e., ULPS is active, and then disable ULPS.
Fixing the condition gets rid of the following spurious error messages:
[drm:glk_dsi_device_ready [i915]] *ERROR* ULPS is still active
Fixes: 4644848369 ("drm/i915/glk: Add MIPIIO Enable/disable sequence")
Cc: Deepak M <m.deepak@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <drm-intel-fixes@lists.freedesktop.org>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170428080222.6147-1-ander.conselvan.de.oliveira@intel.com
ILK should survive a reset without display corruption.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
HAS_HW_CONTEXTS is misleading condition for GPU reset and CCID,
replace it with Gen specific (to be updated in next patches).
HAS_HW_CONTEXTS in i915_l3_write is bogus because each HAS_L3_DPF
match also has .has_hw_contexts = 1 set.
This leads to us being able to get rid of the property completely.
v2:
- Keep the checks at Gen6 for no functional change (Ville)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Pre-calculate engine context size based on engine class and device
generation and store it in the engine instance.
v2:
- Squash and get rid of hw_context_size (Chris)
v3:
- Move after MMIO init for probing on Gen7 and 8 (Chris)
- Retained rounding (Tvrtko)
v4:
- Rebase for deferred legacy context allocation
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: intel-gvt-dev@lists.freedesktop.org
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Looks like intel_guc_reset had the ability to sleep under the
uncore spinlock since forever but it wasn't detected until the
recent changes annotated the wait for register with might_sleep.
I have fixed it by removing holding of the uncore spinlock over
the call to gen6_hw_domain_reset, since I do not see that is
really needed. But there is always a possibility I am missing
some nasty detail so please double check.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Almost from the outset for execlists, we used deferred allocation of the
logical context and rings. Then we ported the infrastructure for pinning
contexts back to legacy, and so now we are able to also implement
deferred allocation for context objects prior to first use on the legacy
submission.
v2: We still need to differentiate between legacy engines, Joonas is
fixing that but I want this first ;) (Joonas)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170427104651.22394-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
As all other functions related to resetting engines are using
reset_engine.
v2: remove _request_ and use start/cancel instead (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170418202335.35232-3-michel.thierry@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Avoid having too large a stack by creating the fake struct inode/file on
the heap instead.
drivers/gpu/drm/i915/selftests/mock_drm.c: In function 'mock_file':
drivers/gpu/drm/i915/selftests/mock_drm.c:46:1: error: the frame size of 1328 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
drivers/gpu/drm/i915/selftests/mock_drm.c: In function 'mock_file_free':
drivers/gpu/drm/i915/selftests/mock_drm.c:54:1: error: the frame size of 1312 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 66d9cb5d80 ("drm/i915: Mock the GEM device for self-testing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20170419094143.16922-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 2310b3c952)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Previously with commit a9c1f90c8e
("drm/i915: Don't mask EI UP interrupt on IVB|SNB") certain,
seemingly unrelated bit (GEN6_PM_RP_UP_EI_EXPIRED) was needed
to be unmasked for IVB and SNB in order to prevent system hang
with chained batchbuffers.
Our CI was seeing incomplete results with tests that used
chained batches and it was found out that HSW needs to have this
same bit unmasked to reliably survive chained batches.
Always unmask GEN6_PM_RP_UP_EI_EXPIRED on Haswell to
prevent system hang with batch chaining.
Testcase: igt/gem_exec_fence/nb-await-default
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100672
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1492082127-29007-1-git-send-email-mika.kuoppala@intel.com
(cherry picked from commit 3396a27385)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
i915_gem_request_alloc() uses error pointers. It never returns NULLs.
Fixes: 0daf0113cf ("drm/i915: Mock infrastructure for request emission")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413195217.GA26108@mwanda
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit be02f75564)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Apparently some DP sinks are a little nuts and cause HPD to drop
intermittently during modesets. This happens eg. on an ASUS PB287Q.
In oder to recover from this we can't really use the previous
connector status to determine if the link needs retraining, so let's
just ignore that piece of information and do the retrain
unconditionally. We do of course still check whether the link is
supposed to be running or not.
To actually get read out the EDID and update things properly we
also need to nuke the goto out added by commit 7d23e3c37b
("drm/i915: Cleaning up intel_dp_hpd_pulse"). I'm actually not sure
why that was there. Perhaps to avoid an EDID read if the connector
status didn't appear to change, but that sort of thing is quite racy
and would have failed anyway if we failed to keep up with the
hotplugs (if we missed the HPD down in between two HPD ups). And
now that we take this codepath unconditionally we definitely need
to drop the goto as otherwise we would never do the EDID read.
v2: Drop the goto that made us skip EDID reads entirely. Doh!
v3: Rebase due to locking changes
s/apparely/apparently/ in the comment (Chris)
Cc: stable@vger.kernel.org
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Reported-by: Palmer Dabbelt <palmer@dabbelt.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99766
References: https://lists.freedesktop.org/archives/intel-gfx/2017-February/119779.html
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170412193017.21029-1-ville.syrjala@linux.intel.com
(cherry picked from commit 1a36147bb9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Many sightings report the greater prevalence of allocation failures.
This is all due to the incorrect use of mapping_gfp_constraint(), so
remove it in favour of just querying the mapping_gfp_mask() which are
the exact gfp_t we wanted in the first place.
We still do expect a higher chance of reporting ENOMEM, as that is the
intention of using __GFP_NORETRY -- to fail rather than oom after having
reclaimed from our bo caches, and having done a direct|kswapd reclaim
pass.
Reported-by: Jason Ekstrand <jason.ekstrand@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100594
Fixes: 24f8e00a8a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170405221514.23251-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit b268d9fe0f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We're clearing the legacy_cursor_update flag before calling
drm_atomic_helper_setup_commit() which means the helper will
wait for the flip to complete before cleaning up the framebuffers.
That's not what we want for the legacy cursor, so let's clear
the flag after setting up the commit.
Also toss in a FIXME about solving these problems in a nicer
way using the fabled vblank workers.
v2: Also unsync with legacy page flips
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Rafael Ristovski <rafael.ristovski@gmail.com>
Fixes: a5509abda4 ("drm/i915: Fix legacy cursor vs. watermarks for ILK-BDW")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170329142123.5923-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 8952030440)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If the engine is continually completing nops, we can saturate the
signaler and keep it working indefinitely. This angers the NMI watchdog!
A good example is to disable semaphores on snb and run igt/gem_exec_nop -
the parallel, multi-engine workloads are more than sufficient to hog the
CPU, preventing the system from even processing ICMP echo replies.
v2: Tvrtko dug into cond_resched() on x86 and found that it only
depended upon preempt_count and not tif_need_resched() - which means
that we would always call schedule() at that point.
Fixes: c81d46138d ("drm/i915: Convert trace-irq to the breadcrumb waiter")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170404120531.10737-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit a7980a640c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If the signal to park arrives before we sleep, then we need to check
kthread_should_park() before sleeping to avoid missing the signal.
Otherwise, if the signal arrives whilst we are processing completed
requests, we will reset the current->state back to TASK_INTERRUPTIBLE
and so miss the wakeup.
Fixes: fe3288b5da ("drm/i915: Park the breadcrumbs signaler across a GPU reset")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403105124.8969-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit b1becb8826)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If we are enabling the breadcrumbs signaling prior to submitting the
request, we know that we cannot have missed the interrupt and can
therefore skip immediately waking the signaler to check.
This reduces a significant chunk of the __i915_gem_request_submit()
overhead for inter-engine synchronisation, for example in gem_exec_whisper.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170426080659.28771-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
gvt-next-fixes-2017-04-20
- some code optimization from Changbin
- debug message cleanup after QoS merge
- misc fixes for display mmio init, reset vgpu warning, etc.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We need to keep track of the last location we ask the hw to read up to
(RING_TAIL) separately from our last write location into the ring, so
that in the event of a GPU reset we do not tell the HW to proceed into
a partially written request (which can happen if that request is waiting
for an external signal before being executed).
v2: Refactor intel_ring_reset() (Mika)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100144
Testcase: igt/gem_exec_fence/await-hang
Fixes: 821ed7df6e ("drm/i915: Update reset path to fix incomplete requests")
Fixes: d55ac5bf97 ("drm/i915: Defer transfer onto execution timeline to actual hw submission")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170425130049.26147-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
As we now share the execlist_port[] tracking for both execlists/guc, we
can reset the inflight count on both and report which requests are being
restarted.
Suggested-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170425103835.31871-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The hangcheck runs independently to the main flow of seqno through the
driver. However, we have an odd coupling of the seqno reset that is
unwelcome, and if poked at just the right rate can cause spurious hangs
(e.g. gem_exec_whisper) on an apparently idle engine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170421083113.21321-1-chris@chris-wilson.co.uk
drm-misc-next-fixes-2017-04-20
Core changes:
- Maintain sti via drm-misc (Vincent)
- Rename dma_buf_ops->kmap_* to avoid naming collision (Logan)
Driver changes:
- Fix UHD displays on stih407 (Vincent)
- Fix uninitialized var return in atmel-hlcdc (Dan)
* tag 'drm-misc-next-fixes-2017-04-20' of git://anongit.freedesktop.org/git/drm-misc:
dma-buf: Rename dma-ops to prevent conflict with kunmap_atomic macro
drm: atmel-hlcdc: Uninitialized return in atmel_hlcdc_create_outputs()
drm/sti: fix GDP size to support up to UHD resolution
MAINTAINERS: add drm/sti driver into drm-misc
The contents of a ring are only valid between HEAD and TAIL, when the
ring is idle (HEAD == TAIL) we can simply let the pages go under memory
pressure if they are not pinned by an active context. Any new content
will be written after HEAD and so the ring will again be valid between
HEAD and TAIL, everything outside can be discarded.
Note that we take care of ensuring that we do not reset the HEAD
backwards following a GPU hang on an idle ring.
The same precautions are what enable us to use stolen memory for rings.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170420101709.27250-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Avoid having too large a stack by creating the fake struct inode/file on
the heap instead.
drivers/gpu/drm/i915/selftests/mock_drm.c: In function 'mock_file':
drivers/gpu/drm/i915/selftests/mock_drm.c:46:1: error: the frame size of 1328 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
drivers/gpu/drm/i915/selftests/mock_drm.c: In function 'mock_file_free':
drivers/gpu/drm/i915/selftests/mock_drm.c:54:1: error: the frame size of 1312 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 66d9cb5d80 ("drm/i915: Mock the GEM device for self-testing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20170419094143.16922-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Seeing the kunmap_atomic dma_buf_ops share the same name with a macro
in highmem.h, the former can be aliased if any dma-buf user includes
that header.
I'm personally trying to include highmem.h inside scatterlist.h and this
breaks the dma-buf code proper.
Christoph Hellwig suggested [1] renaming it and pushing this patch ASAP.
To maintain consistency I've renamed all four of kmap* and kunmap* to be
map* and unmap*. (Even though only kmap_atomic presently conflicts.)
[1] https://www.spinics.net/lists/target-devel/msg15070.html
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1492630570-879-1-git-send-email-logang@deltatee.com
While highly unlikely, this makes sure that the string built from
engine names won't be processed as a format string.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411045630.GA6612@beast
Move the BUILD_BUG_ONs for busy-wait duration outside the
_wait_for_atomic macro as discussed on the mailing list.
v2: Simplify the macro by omitting the ret__ local. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Fixes: 1d1a9774e4 ("drm/i915: Extend intel_wait_for_register_fw() with fast timeout")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170418105211.7089-1-tvrtko.ursulin@linux.intel.com
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJY881cAAoJEHm+PkMAQRiGG4UH+wa2z6Qet36Uc4nXFZuSMYrO
ErUWs1QpTDDv4a+LE4fgyMvM3j9XqtpfQLy1n70jfD14IqPBhHe4gytasAf+8lg1
YvddFx0Yl3sygVu3dDBNigWeVDbfwepW59coN0vI5nrMo+wrei8aVIWcFKOxdMuO
n72u9vuhrkEnLJuQk7SF+t4OQob9McXE3s7QgyRopmlKhKo7mh8On7K2BRI5uluL
t0j5kZM0a43EUT5rq9xR8f5pgtyfTMG/FO2MuzZn43MJcZcyfmnOP/cTSIvAKA5U
1i12lxlokYhURNUe+S6jm8A47TrqSRSJxaQJZRlfGJksZ0LJa8eUaLDCviBQEoE=
=6QWZ
-----END PGP SIGNATURE-----
Merge tag 'v4.11-rc7' into drm-next
Backmerge Linux 4.11-rc7 from Linus tree, to fix some
conflicts that were causing problems with the rerere cache
in drm-tip.
A group of Linux kernel hackers reported chasing a bug that resulted
from their assumption that SLAB_DESTROY_BY_RCU provided an existence
guarantee, that is, that no block from such a slab would be reallocated
during an RCU read-side critical section. Of course, that is not the
case. Instead, SLAB_DESTROY_BY_RCU only prevents freeing of an entire
slab of blocks.
However, there is a phrase for this, namely "type safety". This commit
therefore renames SLAB_DESTROY_BY_RCU to SLAB_TYPESAFE_BY_RCU in order
to avoid future instances of this sort of confusion.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <linux-mm@kvack.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
[ paulmck: Add comments mentioning the old name, as requested by Eric
Dumazet, in order to help people familiar with the old name find
the new one. ]
Acked-by: David Rientjes <rientjes@google.com>
Previously with commit a9c1f90c8e
("drm/i915: Don't mask EI UP interrupt on IVB|SNB") certain,
seemingly unrelated bit (GEN6_PM_RP_UP_EI_EXPIRED) was needed
to be unmasked for IVB and SNB in order to prevent system hang
with chained batchbuffers.
Our CI was seeing incomplete results with tests that used
chained batches and it was found out that HSW needs to have this
same bit unmasked to reliably survive chained batches.
Always unmask GEN6_PM_RP_UP_EI_EXPIRED on Haswell to
prevent system hang with batch chaining.
Testcase: igt/gem_exec_fence/nb-await-default
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100672
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1492082127-29007-1-git-send-email-mika.kuoppala@intel.com
There are two bugs here. The && should be || and the > is off by one so
it should be >= ARRAY_SIZE().
Fixes: 8453d674ae ("drm/i915/gvt: vGPU execlist virtualization")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Introduce a new execobject.flag (EXEC_OBJECT_CAPTURE) that userspace may
use to indicate that it wants the contents of this buffer preserved in
the error state (/sys/class/drm/cardN/error) following a GPU hang
involving this batch.
Use this at your discretion, the contents of the error state. although
compressed, are allocated with GFP_ATOMIC (i.e. limited) and kept for all
eternity (until the error state is destroyed).
Based on an earlier patch by Ben Widawsky <ben@bwidawsk.net>
Testcase: igt/gem_exec_capture
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Matt Turner <mattst88@gmail.com>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Acked-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170415093902.22581-1-chris@chris-wilson.co.uk
If "crtc" is NULL, then my static checker complains that "ret" isn't
initialized on that path. It doesn't really cause a problem unless
"ret" is somehow set to -EDEADLK which is not likely.
Chris Wilson also noticed another error path where "ret" isn't set
correctly.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170414195425.GA8144@mwanda
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
i915_gem_request_alloc() uses error pointers. It never returns NULLs.
Fixes: 0daf0113cf ("drm/i915: Mock infrastructure for request emission")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413195217.GA26108@mwanda
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
If link training at a link rate optimal for a particular
mode fails during modeset's atomic commit phase, then we
let the modeset complete and then retry. We save the link rate
value at which link training failed, update the link status property
to "BAD" and use a lower link rate to prune the modes. It will redo
the modeset on the current mode at lower link rate or if the current
mode gets pruned due to lower link constraints then, it will send a
hotplug uevent for userspace to handle it.
This is also required to pass DP CTS tests 4.3.1.3, 4.3.1.4,
4.3.1.6.
This patch is a resend of the original commit id (233ce881dd
"drm/i915: Implement Link Rate fallback on Link training failure")
which got reverted in this commit id (afc1ebf456 Revert
"drm/i915: Implement Link Rate fallback on Link training failure")
due to CI failures.
After investigating the CI failures it was found that these
were essentially the failures which were always there but hidden because
they used to be DRM_DEBUG_KMS messages for link failures so never got
caught by CI. But now this patch actually throws DRM_ERROR if the link
training fails at RBR and 1 lane. So it caught these link train failures.
There were two failures:
1. On SKL 6700k this was because the machine in CI lab is a SKL desktop
without eDP on Port A. But our VBT initialization code in the driver writes
VBT defaults in a way that it always sets DP flag on Port A and this does
not get cleared after parsing the VBT outputs. This has been fixed in
commit id (bb1d132935 "drm/i915/vbt: split out defaults that are set
when there is no VBT) and (665788572c "drm/i915/vbt: don't propagate
errors from intel_bios_init())
2. On ILK-650 desktop - This was happening because of a bad monitor desktop
combination. I switched the monitor in the CI lab and that helped get rid
of the link failures on ILK system.
v10:
* Rebase on drm-tip and resend after revert
v9:
* Use the trimmed max values of link rate/lane count based on
link train fallback (Daniel Vetter)
v8:
* Set link_status to BAD first and then call mode_valid (Jani Nikula)
v7:
Remove the redundant variable in previous patch itself
v6:
* Obtain link rate index from fallback_link_rate using
the helper intel_dp_link_rate_index (Jani Nikula)
* Include fallback within intel_dp_start_link_train (Jani Nikula)
v5:
* Move set link status to drm core (Daniel Vetter, Jani Nikula)
v4:
* Add fallback support for non DDI platforms too
* Set connector->link status inside set_link_status function
(Jani Nikula)
v3:
* Set link status property to BAd unconditionally (Jani Nikula)
* Dont use two separate variables link_train_failed and link_status
to indicate same thing (Jani Nikula)
v2:
* Squashed a few patches (Jani Nikula)
Acked-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Harry Wentland <Harry.wentland@amd.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/16ca48b1e74c618929245e9a085b9e3483c3a16d.1491485983.git.jani.nikula@intel.com
Apparently some DP sinks are a little nuts and cause HPD to drop
intermittently during modesets. This happens eg. on an ASUS PB287Q.
In oder to recover from this we can't really use the previous
connector status to determine if the link needs retraining, so let's
just ignore that piece of information and do the retrain
unconditionally. We do of course still check whether the link is
supposed to be running or not.
To actually get read out the EDID and update things properly we
also need to nuke the goto out added by commit 7d23e3c37b
("drm/i915: Cleaning up intel_dp_hpd_pulse"). I'm actually not sure
why that was there. Perhaps to avoid an EDID read if the connector
status didn't appear to change, but that sort of thing is quite racy
and would have failed anyway if we failed to keep up with the
hotplugs (if we missed the HPD down in between two HPD ups). And
now that we take this codepath unconditionally we definitely need
to drop the goto as otherwise we would never do the EDID read.
v2: Drop the goto that made us skip EDID reads entirely. Doh!
v3: Rebase due to locking changes
s/apparely/apparently/ in the comment (Chris)
Cc: stable@vger.kernel.org
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Reported-by: Palmer Dabbelt <palmer@dabbelt.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99766
References: https://lists.freedesktop.org/archives/intel-gfx/2017-February/119779.html
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170412193017.21029-1-ville.syrjala@linux.intel.com
The wopcm registers are write-once, so any write after the first one
will just be ignored. The registers survive a GPU reset but not
always a suspend/resume cycle, so to keep things simple keep the
writes in the intel_uc_init_hw function instead of moving it earlier
to make sure we attempt them every time we try to load GuC.
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491524332-23860-1-git-send-email-daniele.ceraolospurio@intel.com
As those debug messages might appear in every timer call for scheduler,
it's too noisy, eat too much log and aren't meaningful. So remove them.
Cc: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Currently intel_dp_check_link_status() tries to retrain the link if
Clock recovery or Channel EQ for any of the lanes indicated by
intel_dp->lane_count is not set. However these values cached in intel_dp
structure can be stale if link training has failed for these values
during previous modeset. Or these values can get stale since we have
now re read the DPCD registers or it can be 0 in case of connected boot
case.
This patch validates these values against the max link rate and max lane
count values.
This is absolutely required incase the common_rates or max lane count
are now different due to link fallback.
v2:
* Include the FIXME commnet inside the function (Ville Syrjala)
* Remove the redundant parenthesis (Ville Syrjala)
v3 by Jani:
* rebase on the DP refactoring series
* rename intel_dp_link_params_is_valid to intel_dp_link_params_valid
* minor stylistic changes
v4:
* Compare the link rate against max link rate not the
common_rates since common_rates does not account for the
lowered fallback link rate value. (Ville Syrjala)
v5:
* Fixed a warning for unused variable (Manasi)
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491512412-30016-1-git-send-email-manasi.d.navare@intel.com
igt_mmap_offset_exhaustion() selftest was using live requests to make an
object busy, but we did not hold a runtime pm wakeref for submitting the
requests. Acquire it to avoid triggering "RPM wakelock ref not held
during HW access" warnings.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411234427.14841-3-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
If we have a mock engine and it has no more requests in flight, report
it as idle as there is no hardware to contradict us! Otherwise we
attempt to query the hw that doesn't exist and find that the hw hasn't
set its idle bit and we get upset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411234427.14841-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When discussing a new WC mmap, we based the interface upon the
assumption that GTT was fully coherent. How naive! Commits 3b5724d702
("drm/i915: Wait for writes through the GTT to land before reading
back") and ed4596ea99 ("drm/i915/guc: WA to address the Ringbuffer
coherency issue") demonstrate that writes through the GTT are indeed
delayed and may be overtaken by direct WC access. To be safe, if
userspace is mixing WC mmaps with other potential GTT access (pwrite,
GTT mmaps) it should use set_domain(WC).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96563
Testcase: igt/gem_pwrite/small-gtt*
Testcase: igt/drv_selftest/coherency
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170412110111.26626-2-chris@chris-wilson.co.uk
In the next patch, we will introduce a new cache domain for
differentiating between GTT access and direct WC access. This will
require us to include WC in our write_domain flushes. Rather than
duplicate a third function, combine the existing two into one and
flushing WC writes will then be automatically handled as well.
v2: Be smarter and clearer by passing in the write domains to flush (Joonas)
v3: One missed ~ in v2 conversion
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170412110111.26626-1-chris@chris-wilson.co.uk
This reverts commit ea49c9acf2.
mode_config.mutex was originally added to fix WARNs in connector
functions, but now that atomic nonblocking modeset support is
included, we will likely never hold any any lock at all.
The WARN mentioned in commit bbf35e9def ("drm/i915:
Pass atomic state to intel_audio_codec_enable, v2."), so it's
safe to revert this now.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491312168-18147-1-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
MST doesn't support setting any properties, but it should still
use the atomic helper for setting properties.
Only path and tile properties are supported (read-only).
Those are immutable, and handled by drm core.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491815239-10685-4-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Those properties are not hooked up on MST and were ignored. Best not expose them at all.
Without this the next patch fails to start on X.org, because the DP-MST properties could
not be read.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/751b85a0-81cd-09e2-9e60-6d4ddbf1c6ac@linux.intel.com
Testcase: kms_properties
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
intel_tv has properties that are handled in the atomic core, but
needs a modeset to update the properties inside the connector.
The detect(), get_mode() and mode_valid() probe callbacks also
depend on the connector state, which made this a good connector
to convert first. It helped find all the issues when converting
connectors to atomic.
Because of these requirements, connector atomic_check() was added
and connection_mutex is held during probing. The diffstat looks
more favorable now. :)
Changes since v1:
- Add intel_encoder->swap_state to allow updating connector state.
- Add intel_tv->format for detect_mode and mode_valid, updated on atomic commit.
Changes since v2:
- Fix typo in tv_choose_preferred modes function name.
- Assignment of tv properties is done in core, so intel_tv only needs
a atomic_check function. Thanks Ville!
Changes since v3:
- connection_mutex is now held in mode_valid() and get_modes(),
this removes the need for caching parts of the connector_state.
Changes since v4:
- Use the new atomic connector check function.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491815239-10685-3-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
They have been unused since 2010, after the code for
intel_tv_save/restore was removed in the below commit:
commit 6443170f6d
Author: Eric Anholt <eric@anholt.net>
Date: Fri Apr 2 15:24:27 2010 -0700
drm/i915: Remove dead KMS encoder save/restore code.
This was brought over from UMS, and used for a while until we decided
that drm_helper_resume_force_mode was easier and more reliable, since
it didn't require duplicating all the code deleted here. We just
forgot to delete all that junk for a while.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491815239-10685-2-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Add commit blurb based on danvet's feedback.]
We indirectly hold the runtime-pm for the intel_lrc_irq_handler() by
virtue of dev_priv->gt.awake keeping a wakeref whilst the requests are
busy. As this is not obvious from the code, add a comment.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411175850.2470-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Maarten needs both the new connector->atomic_check hook and the
connection_mutex locking changes in the probe helpers to be able to
start merging the connector property conversion to atomic.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
GVT implements a purely virtual monitor for virtual GPU independent of
the host. Some DDI related MMIO are not initialized in current code
which cause the display initialization failure in guest. This patch
fills the gap.
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Let c compiler handle the structure copying. The compiler will use
builtin function to handle that.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
From perf data, found a significant overhead at ring id check in the
function get_opcode. This inline function is frequently used.
Since Intel static predictor will predict the branch to fall through
so the prediction most fail. This is wasting CPU pipeline resource.
We do not need check the engine id everywhere, it should be reliable.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The platform check is done outside, no need check again. Platform doesn't
include mocs should not invoke this two functions.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Make the global mmio list be cacheline aligned to improve performance.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Technically speaking, the context size is per engine class, not per
instance.
v2: Add MISSING_CASE (Tvrtko)
v3: Rebased
v4: Restore the interface back to hiding the class lookup (Chris)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491905472-16189-1-git-send-email-oscar.mateo@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
In places, we assume that RCS exists. This has been true forever, but
let us catch this failure during bringup by adding an explicit check
that we do have an RCS engine.
v2: Make use of HAS_ENGINE (Tvrtko)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411165658.23828-1-chris@chris-wilson.co.uk
The source might not support as many lanes as the sink, or the link
training might have failed at higher lane counts. Take these into
account.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/cf59530acafaf9258fb643d321ad251b44f34e29.1491485983.git.jani.nikula@intel.com
These are the theoretical maximums common for source and sink. These are
the maximums we should start with. They may be degraded in case of link
training failures, and the dynamic link values are stored separately.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/5088aca253c47dfa18251e1adb976aca1718f083.1491485983.git.jani.nikula@intel.com
If we modify these on the fly depending on the link conditions, don't
pretend they are sink properties.
Some link vs. sink confusion still remains, but we'll take care of them
in follow-up patches.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/3739b4fac502ebd1c6e075a62c1a195e4094eb16.1491485983.git.jani.nikula@intel.com
In link training fallback, we're trying to find a rate that we know is
in a sorted array of common link rates. We don't need to limit the array
using the max rate. For test request, the DP CTS doesn't say we should
limit the rate based on earlier fallback. This lets us get rid of
intel_dp_link_rate_index() and use intel_dp_rate_index() instead.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/33cab481a3228f31e938b5891a6285d892dcf272.1491485983.git.jani.nikula@intel.com
Now that source rates are static and sink rates are updated whenever
DPCD is updated, we can do and cache the intersection of them whenever
sink rates are updated. This reduces code complexity, as we don't have
to keep calling the functions to intersect. We also get rid of several
common rates arrays on stack.
Limiting the common rates by a max link rate can be done by picking the
first N elements of the cached common rates.
v2: get rid of the local common_rates variable (Manasi)
v3: don't clobber cached eDP rates on short pulse (Ville)
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/e3b287e8cb6559b1f8fd4e80b78a8d22f1802eb7.1491485983.git.jani.nikula@intel.com
Looking at DPCD DP_MAX_LINK_RATE may be completely bogus for eDP 1.4
which is allowed to use link rate select method and have 0 in max link
rate. With this change, it makes sense to store the max rate as the
actual rate rather than as a bw code.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/3e8baadb406d59f414cab36fed9f0b35d207fde5.1491485983.git.jani.nikula@intel.com
We want to refer to the index of the engine consistently throughout the
userspace ABI. We already have such an index through the execbuffer
engine specifier, that needs to be able to refer to each engine
specifically, so rename it the index to uabi_id to reflect its
generality beyond execbuf.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411124306.15448-1-chris@chris-wilson.co.uk
There are some properties that logically belong to the engine class, and some
that belong to the engine instance. Make it explicit.
v2: Commit message (Tvrtko)
v3:
- Rebased
- Exec/uabi id should be per instance (Chris)
v4:
- Rebased
- Avoid re-ordering fields for smaller diff (Tvrtko)
- Bug on oob access to the class array (Michal)
v5: Bug on the right thing (Michal)
v6: Rebased
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491834873-9345-5-git-send-email-oscar.mateo@intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Not really needed, but makes the next change a little bit more compact.
v2:
- Use zero-based numbering for engine names: xcs0, xcs1.. xcsN (Tvrtko, Chris)
- Make sure the mock engine name is null-terminated (Tvrtko, Chris)
v3: Because I'm stupid (Chris)
v4: Verify engine name wasn't truncated (Michal)
v5:
- Kill the warning in mock engine (Chris)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491834873-9345-4-git-send-email-oscar.mateo@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
If we needed to do something different for the init functions, we could
always look at the engine instance to make the distinction. But, in any
case, the two functions are virtually identical already (please notice
that BSD2_RING is only used from gen8 onwards).
With this, the init functions depends excusively on the engine class
(a fact that we will use soon).
v2: Commit message
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491834873-9345-3-git-send-email-oscar.mateo@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
In such a way that vcs and vcs2 are just two different instances (0 and 1)
of the same engine class (VIDEO_DECODE_CLASS).
v2: Align the instance types (Tvrtko)
v3: Don't use enums for bspec-defined stuff (Michal)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491834873-9345-2-git-send-email-oscar.mateo@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
While we do hold the forcewake for legacy ringbuffer initialisation, we
don't guard our access with the uncore.lock spinlock. In theory, we only
initialise when no others should be accessing the same mmio cachelines,
but in practice be safe as this is an infrequently used path and not
worth risky micro-optimisations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411101340.31994-5-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Since the sandybridge_pcode_read() may be called from
skl_pcode_request() inside an atomic context (with preempt disabled), we
should avoid hitting any sleeping paths. Currently is being called with
a 500ms timeout, irrespective of being inside an atomic context or not.
This is reduced down to 500us to play nice with the atomic context, and
that appears to be sufficient to keep BAT happy (we have a DRM_ERROR
should it timeout), i.e. we do not see any 500us pcode timeouts for
normal use. So leave it as a pure spin without having to introduce new
code paths to separate atomic/normal contexts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411101340.31994-4-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
We acquire the forcewake and use I915_READ_FW instead for the atomic
wait within intel_uncore_wait_for_register. However, this still leaves
us vulnerable to concurrent mmio access to the register, which can cause
system hangs on gen7. The protection is to acquire uncore.lock around
each register, so lets add it back.
v2: Wrap __intel_wait_for_register_fw() to re-use its atomic wait_for
loop and spare adding another for ourselves.
v3: Add might_sleep() annotation
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411101340.31994-3-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
submit_request() is called from an atomic context, it's not allowed to
sleep. We have to be careful in our parameters to
intel_uncore_wait_for_register() to limit ourselves to the atomic wait
loop and not incur the wrath of our warnings.
Fixes: 6976e74b5f ("drm/i915: Don't allow overuse of __intel_wait_for_register_fw()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170410143807.22725-1-chris@chris-wilson.co.uk
Link: http://patchwork.freedesktop.org/patch/msgid/20170411101340.31994-2-chris@chris-wilson.co.uk
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Allow the caller to use the fast_timeout_us to specify how long to wait
within the atomic section, rather than transparently switching to a
sleeping loop for larger values. This is required as some callsites may
need a long wait and are in an atomic section.
v2: Reinforce kerneldoc fast_timeout_us limit with a GEM_BUG_ON
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170411112705.12656-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Only call synchronize_rcu_expedited after unlocking struct_mutex to
avoid deadlock because the workqueues depend on struct_mutex.
>From original patch by Andrea:
synchronize_rcu/synchronize_sched/synchronize_rcu_expedited() will
hang until its own workqueues are run. The i915 gem workqueues will
wait on the struct_mutex to be released. So we cannot wait for a
quiescent state using those rcu primitives while holding the
struct_mutex or it creates a circular lock dependency resulting in
kernel hangs (which is reproducible but goes undetected by lockdep).
kswapd0 D 0 700 2 0x00000000
Call Trace:
? __schedule+0x1a5/0x660
? schedule+0x36/0x80
? _synchronize_rcu_expedited.constprop.65+0x2ef/0x300
? wake_up_bit+0x20/0x20
? rcu_stall_kick_kthreads.part.54+0xc0/0xc0
? rcu_exp_wait_wake+0x530/0x530
? i915_gem_shrink+0x34b/0x4b0
? i915_gem_shrinker_scan+0x7c/0x90
? i915_gem_shrinker_scan+0x7c/0x90
? shrink_slab.part.61.constprop.72+0x1c1/0x3a0
? shrink_zone+0x154/0x160
? kswapd+0x40a/0x720
? kthread+0xf4/0x130
? try_to_free_pages+0x450/0x450
? kthread_create_on_node+0x40/0x40
? ret_from_fork+0x23/0x30
plasmashell D 0 4657 4614 0x00000000
Call Trace:
? __schedule+0x1a5/0x660
? schedule+0x36/0x80
? schedule_preempt_disabled+0xe/0x10
? __mutex_lock.isra.4+0x1c9/0x790
? i915_gem_close_object+0x26/0xc0
? i915_gem_close_object+0x26/0xc0
? drm_gem_object_release_handle+0x48/0x90
? drm_gem_handle_delete+0x50/0x80
? drm_ioctl+0x1fa/0x420
? drm_gem_handle_create+0x40/0x40
? pipe_write+0x391/0x410
? __vfs_write+0xc6/0x120
? do_vfs_ioctl+0x8b/0x5d0
? SyS_ioctl+0x3b/0x70
? entry_SYSCALL_64_fastpath+0x13/0x94
kworker/0:0 D 0 29186 2 0x00000000
Workqueue: events __i915_gem_free_work
Call Trace:
? __schedule+0x1a5/0x660
? schedule+0x36/0x80
? schedule_preempt_disabled+0xe/0x10
? __mutex_lock.isra.4+0x1c9/0x790
? del_timer_sync+0x44/0x50
? update_curr+0x57/0x110
? __i915_gem_free_objects+0x31/0x300
? __i915_gem_free_objects+0x31/0x300
? __i915_gem_free_work+0x2d/0x40
? process_one_work+0x13a/0x3b0
? worker_thread+0x4a/0x460
? kthread+0xf4/0x130
? process_one_work+0x3b0/0x3b0
? kthread_create_on_node+0x40/0x40
? ret_from_fork+0x23/0x30
Fixes: 3d3d18f086 ("drm/i915: Avoid rcu_barrier() from reclaim paths (shrinker)")
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 8f612d0551)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
i915 is currently doing a full GPU reset at the end of
i915_gem_suspend() followed by GuC suspend in i915_drm_suspend(). This
GPU reset clobbers the GuC, causing the suspend request to then fail,
leaving the GuC in an undefined state. We need to tell the GuC to
suspend before we do the direct intel_gpu_reset().
v2: Commit message update. (Chris, Daniele)
Fixes: 1c777c5d1d ("drm/i915/hsw: Fix GPU hang during resume from S3-devices state")
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491387710-20553-1-git-send-email-sagar.a.kamble@intel.com
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit fd08923384)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Last drm-misc-next pull req for 4.12
Core changes:
- fb_helper checkpatch cleanup and simplified _add_one_connector() (Thierry)
- drm_ioctl and drm_sysfs improved/gained documentation (Daniel)
- [ABI] Repurpose reserved field in drm_event_vblank for crtc_id (Ander)
- Plumb acquire ctx through legacy paths to avoid lock_all and legacy_backoff
(Daniel)
- Add connector_atomic_check to check conn constraints on modeset (Maarten)
- Add drm_of_find_panel_or_bridge to remove boilerplate in drivers (Rob)
Driver changes:
- meson moved to drm-misc (Neil)
- Added support for Amlogic GX SoCs in dw-hdmi (Neil)
- Rockchip unbind actually cleans up the things bind initializes (Jeffy)
- A couple misc fixes in virtio, dw-hdmi
NOTE: this also includes a backmerge of drm-next as well rc5 (we needed vmwgfx
as well as the new synopsys media formats)
* tag 'drm-misc-next-2017-04-07' of git://anongit.freedesktop.org/git/drm-misc: (77 commits)
Revert "drm: Don't allow interruptions when opening debugfs/crc"
drm: Only take cursor locks when the cursor plane exists
drm/vmwgfx: Fix fbdev emulation using legacy functions
drm/rockchip: Shutdown all crtcs when unbinding drm
drm/rockchip: Reorder drm bind/unbind sequence
drm/rockchip: analogix_dp: Disable clock when unbinding
drm/rockchip: vop: Unprepare clocks when unbinding
drm/rockchip: vop: Enable pm domain before vop_initial
drm/rockchip: cdn-dp: Don't unregister audio dev when unbinding
drm/rockchip: cdn-dp: Don't try to release firmware when not loaded
drm: bridge: analogix: Destroy connector & encoder when unbinding
drm: bridge: analogix: Disable clock when unbinding
drm: bridge: analogix: Unregister dp aux when unbinding
drm: bridge: analogix: Detach panel when unbinding analogix dp
drm: Don't allow interruptions when opening debugfs/crc
drm/virtio: don't leak bo on drm_gem_object_init failure
drm: bridge: dw-hdmi: fix input format/encoding from plat_data
drm: omap: use common OF graph helpers
drm: convert drivers to use drm_of_find_panel_or_bridge
drm: convert drivers to use of_graph_get_remote_node
...
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJY6mY1AAoJEHm+PkMAQRiGB14IAImsH28JPjxJVDasMIRPBxVc
euPPlZgoBieu7sNt+kEsEqdkXuu0MLk6gln0IGxWLeoB2S+u3Tz5LMa2YArVqV9Z
tWzOnI9auE73P2Pz/tUMOdyMs5tO0PolQxX3uljbULBozOHjHRh13fsXchX2yQvl
mFeFCDqpPV0KhWRH/ciA8uIHdvYPhMpkKgRtmR8jXL0yzqLp6+2J+Bs8nHG4NNng
HMVxZPC8jOE/TgWq6k/GmXgxh3H/AideFdHFbLKYnIFJW41ZGOI8a262zq3NmjPd
lywpVU7O7RMhSITY5PnuR3LpNV8ftw1hz2y6t35unyFK1P02adOSj5GJ3hGdhaQ=
=Xz5O
-----END PGP SIGNATURE-----
Backmerge tag 'v4.11-rc6' into drm-next
Linux 4.11-rc6
drm-misc needs 4.11-rc5, may as well fix conflicts with rc6.
Last 4.12 feature pile:
GVT updates:
- Add mdev attribute group for per-vgpu info
- Time slice based vGPU scheduling QoS support (Gao Ping)
- Initial KBL support for E3 server (Han Xu)
- other misc.
i915:
- lots and lots of small fixes and improvements all over
- refactor fw_domain code (Chris Wilson)
- improve guc code (Oscar Mateo)
- refactor cursor/sprite code, precompute more for less overhead in
the critical path (Ville)
- refactor guc/huc fw loading code a bit (Michal Wajdeczko)
* tag 'drm-intel-testing-2017-04-03' of git://anongit.freedesktop.org/git/drm-intel: (121 commits)
drm/i915: Update DRIVER_DATE to 20170403
drm/i915: Clear gt.active_requests before checking idle status
drm/i915/uc: Drop use of MISSING_CASE on trivial enums
drm/i915: make a few DDI functions static
drm/i915: Combine reset_all_global_seqno() loops into one
drm/i915: Remove redudant wait for each engine to idle from seqno wrap
drm/i915: Wait for all engines to be idle as part of i915_gem_wait_for_idle()
drm/i915: Move retire-requests into i915_gem_wait_for_idle()
drm/i915/uc: Move fw path check to fetch_uc_fw()
drm/i915/huc: Remove unused intel_huc_fini()
drm/i915/uc: Add intel_uc_fw_fini()
drm/i915/uc: Add intel_uc_fw_type_repr()
drm/i915/uc: Move intel_uc_fw_status_repr() to intel_uc.h
drivers: gpu: drm: i915L intel_lpe_audio: Fix kerneldoc comments
drm/i915: Suppress busy status for engines if wedged
drm/i915: Do request retirement before marking engines as wedged
drm/i915: Drop verbose and archaic "ring" from our internal engine names
drm/i915: Use a dummy timeline name for a signaled fence
drm/i915: Ironlake do_idle_maps w/a may be called w/o struct_mutex
drm/i915/guc: Take enable_guc_loading check out of GEM core code
...
This function should not be called with long timeouts in atomic context.
Annotate it as might_sleep if timeout is longer than 10us.
v2: fix comment (Michal)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170410121747.209200-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
These params are passed by value, const qualifiers are ignored any way.
While around, unify timeout_ms type from long to int.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170410093817.151280-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Waiting for the response status in scratch register can be done
using our generic function. Let's use it.
v2: rebased
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170407160145.181328-2-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
In some cases we may want to spend more time in atomic wait than
hardcoded 2us. Let's add additional fast timeout parameter to allow
flexible configuration of atomic timeout before switching into heavy wait.
Add also possibility to return registry value to avoid extra read.
v2: use explicit fast timeout (Tvrtko/Chris)
allow returning register value (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170407160145.181328-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
There is no need to specify timeout as unsigned long since this parameter
will be consumed by usecs_to_jiffies() which expects unsigned int only.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170407133212.174608-1-michal.wajdeczko@intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
As we may have very many objects to free, check to see if the task needs
to be rescheduled whilst freeing them.
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170407102552.5781-4-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Before freeing the next batch of objects from the worker, check if the
worker's timeslice has expired and if so, defer the next batch to the
next invocation of the worker.
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170407102552.5781-3-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
By using the same structure for both interruptible and
uninterruptible locking in shrinker code, combined with the
information that mm.interruptible is only being written to, the
code can be greatly simplified.
Also removing the i915_gem_ prefix from the locking functions so
that nobody in their wildest dreams considers exporting them.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1491562175-27680-1-git-send-email-joonas.lahtinen@linux.intel.com
Only call synchronize_rcu_expedited after unlocking struct_mutex to
avoid deadlock because the workqueues depend on struct_mutex.
>From original patch by Andrea:
synchronize_rcu/synchronize_sched/synchronize_rcu_expedited() will
hang until its own workqueues are run. The i915 gem workqueues will
wait on the struct_mutex to be released. So we cannot wait for a
quiescent state using those rcu primitives while holding the
struct_mutex or it creates a circular lock dependency resulting in
kernel hangs (which is reproducible but goes undetected by lockdep).
kswapd0 D 0 700 2 0x00000000
Call Trace:
? __schedule+0x1a5/0x660
? schedule+0x36/0x80
? _synchronize_rcu_expedited.constprop.65+0x2ef/0x300
? wake_up_bit+0x20/0x20
? rcu_stall_kick_kthreads.part.54+0xc0/0xc0
? rcu_exp_wait_wake+0x530/0x530
? i915_gem_shrink+0x34b/0x4b0
? i915_gem_shrinker_scan+0x7c/0x90
? i915_gem_shrinker_scan+0x7c/0x90
? shrink_slab.part.61.constprop.72+0x1c1/0x3a0
? shrink_zone+0x154/0x160
? kswapd+0x40a/0x720
? kthread+0xf4/0x130
? try_to_free_pages+0x450/0x450
? kthread_create_on_node+0x40/0x40
? ret_from_fork+0x23/0x30
plasmashell D 0 4657 4614 0x00000000
Call Trace:
? __schedule+0x1a5/0x660
? schedule+0x36/0x80
? schedule_preempt_disabled+0xe/0x10
? __mutex_lock.isra.4+0x1c9/0x790
? i915_gem_close_object+0x26/0xc0
? i915_gem_close_object+0x26/0xc0
? drm_gem_object_release_handle+0x48/0x90
? drm_gem_handle_delete+0x50/0x80
? drm_ioctl+0x1fa/0x420
? drm_gem_handle_create+0x40/0x40
? pipe_write+0x391/0x410
? __vfs_write+0xc6/0x120
? do_vfs_ioctl+0x8b/0x5d0
? SyS_ioctl+0x3b/0x70
? entry_SYSCALL_64_fastpath+0x13/0x94
kworker/0:0 D 0 29186 2 0x00000000
Workqueue: events __i915_gem_free_work
Call Trace:
? __schedule+0x1a5/0x660
? schedule+0x36/0x80
? schedule_preempt_disabled+0xe/0x10
? __mutex_lock.isra.4+0x1c9/0x790
? del_timer_sync+0x44/0x50
? update_curr+0x57/0x110
? __i915_gem_free_objects+0x31/0x300
? __i915_gem_free_objects+0x31/0x300
? __i915_gem_free_work+0x2d/0x40
? process_one_work+0x13a/0x3b0
? worker_thread+0x4a/0x460
? kthread+0xf4/0x130
? process_one_work+0x3b0/0x3b0
? kthread_create_on_node+0x40/0x40
? ret_from_fork+0x23/0x30
Fixes: 3d3d18f086 ("drm/i915: Avoid rcu_barrier() from reclaim paths (shrinker)")
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
As we call into the shrinker during freeze, we may have freed more
objects since we idled during i915_gem_suspend. Make sure we flush the
i915_gem_free_objects worker prior to saving the unwanted pages into the
hibernation image.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170407102552.5781-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The shrinker is prepared to be called unlocked (and at other times with
struct_mutex held for DIRECT_RECLAIM) so we can skip acquiring the
struct_mutex prior to calling the shrinker during freeze. This improves
our ability to shrink as we can be more aggressive when we know the
caller isn't holding struct_mutex.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170407102552.5781-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When we retire the last request on the ring, before we ever access that
ring again we know it will be completely idle and so we can advance the
ring->head fully to the end (i.e. ring->tail) and not just to the start
of the breadcrumb. This allows us to skip re-emitting the breadcrumb
after resetting the GPU if the ring was entirely idle. This prevents us
from overwriting a seqno wraparound by re-executing a stale breadcrumb,
i.e.
submit_request(1)
intel_engine_init_global_seqno(0)
i915_reset()
would then leave 1 in the HWS, but the next request to execute would
also be with seqno 1. The sanity checks upon submission detect this as a
timewarp and explode. By setting the ring as empty, upon reset the HWS
is left as 0, leaving it consistent with the timeline.
v2: Fix check for deleting last element of list. We know that this
request is always the first element of the ring, so only if next
points back to the start will this be the only request in flight.
v3: Remove opencoding of list_is_last()
v4: Move the block to its own function for some clarity.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100144
Testcase: igt/gem_exec_whisper/hang-*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170406170028.26871-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When we update the global seqno (on the engine timeline), we modify HW
state (both registers and mapped pages). As we do this, we should be
sure that the HW is idle and we are not causing a conflict. The caller
is supposed to wait_for_idle before calling us to update the seqno, so
let's assert they have and the engine is indeed idle.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170405153055.28123-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Load HuC version 1.07.1748 on GLK.
v2: rebased.
v3: Use name of the right platform(John Spotswood)
v4: rebased.
Cc: Jeff Mcgee <jeff.mcgee@intel.com>
Cc: John Spotswood <john.a.spotswood@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: John Spotswood <john.a.spotswood@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490905447-15815-2-git-send-email-anusha.srivatsa@intel.com
Load GuC 10.56 on GLK. Work on firmware is still
in progress. Testing has not been done yet.
This patch addresses the initial need to load the GuC
firmware for HuC authentication
v2: rebased.
Cc: Jeff mcgee <jeff.mcgee@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: John Spotswood <john.a.spotswood@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: John Spotswood <john.a.spotswood@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490905447-15815-1-git-send-email-anusha.srivatsa@intel.com
mode_valid() called from drm_helper_probe_single_connector_modes()
may need to look at connector->state because what a valid mode is may
depend on connector properties being set. For example some HDMI modes
might be rejected when a connector property forces the connector
into DVI mode.
Some implementations of detect() already lock all state,
so we have to pass an acquire_ctx to them to prevent a deadlock.
This means changing the function signature of detect() slightly,
and passing the acquire_ctx for locking multiple crtc's.
For the callbacks, it will always be non-zero. To allow callers
not to worry about this, drm_helper_probe_detect_ctx is added
which might handle -EDEADLK for you.
Changes since v1:
- Always set ctx parameter.
Changes since v2:
- Always take connection_mutex when probing.
Changes since v3:
- Remove the ctx from intel_dp_long_pulse, and add
WARN_ON(!connection_mutex) (danvet)
- Update docs to clarify the locking situation. (danvet)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1491504920-4017-1-git-send-email-maarten.lankhorst@linux.intel.com
Many sightings report the greater prevalence of allocation failures.
This is all due to the incorrect use of mapping_gfp_constraint(), so
remove it in favour of just querying the mapping_gfp_mask() which are
the exact gfp_t we wanted in the first place.
We still do expect a higher chance of reporting ENOMEM, as that is the
intention of using __GFP_NORETRY -- to fail rather than oom after having
reclaimed from our bo caches, and having done a direct|kswapd reclaim
pass.
Reported-by: Jason Ekstrand <jason.ekstrand@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100594
Fixes: 24f8e00a8a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170405221514.23251-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
As per BSPEC, valid cdclk values for glk are 79.2, 158.4, 316.8 Mhz.
Practically we can achive only 99% of these cdclk values (HW team
checking on this). So cdclk should be calculated for the given pixclk as
per that otherwise it may lead to screen corruption, explained below:
1. For DSI AUO panel(1920x1200 @60) required pixclk is 157100 KHZ
2. glk_calc_cdclk returns 79200 KHZ for this pixclk, For 2PPC it
will be 158400 KHZ
3. Practically 100% of the cdclk can’t be achieved, so 99% of 158400
KHZ = 156816 which is less than the desired pixlclk and causes
panel corruption.
v2: Rebased to new CDLCK code framework
v3: Addressed review comments from Ander/Jani
- Add comment in code about 99% usage of CDCLK
- Calculate max dot clock as well with 99% limit
v4 by Jani:
- drop superfluous whitespace change
- rewrite code comments to clarify
v5: Added details of non-working scenario in commit message
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491397463-13637-1-git-send-email-madhav.chauhan@intel.com
There is some conflation related to sink rates, making this change more
complicated than it would otherwise have to be. There are three changes
here that are rather difficult to split up:
1) Use the intel_dp->sink_rates array for all DP, not just eDP 1.4. We
initialize it from DPCD on eDP 1.4 like before, but generate it based
on DP_MAX_LINK_RATE on others. This reduces code complexity when we
need to use the sink rates; they are all always in the sink_rates
array.
2) Update the sink rate array whenever we read DPCD, and use the
information from there. This increases code readability when we need
the sink rates.
3) Disentangle fallback rate limiting from sink rates. In the code, the
max rate is a dynamic property of the *link*, not of the *sink*. Do
the limiting after intersecting the source and sink rates, which are
static properties of the devices.
This paves the way for follow-up refactoring that I've refrained from
doing here to keep this change as simple as it possibly can.
v2: introduce use_rate_select and handle non-confirming eDP (Ville)
v3: don't clobber cached eDP rates on short pulse (Ville)
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/071bad76467f8ab2e73f3f61ad52d5a468004c71.1490712890.git.jani.nikula@intel.com
We need the source rates array so often that it makes sense to set it
once at init. This reduces function calls when we need the rates, making
the code easier to follow.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/aa998882d2b824f671272c60e9d26621ab9d2d17.1490712890.git.jani.nikula@intel.com
Rename the function, move it at the top, and reuse in
intel_dp_link_rate_index(). If there was a reason in the past to use
reverse search order here, there isn't now.
The names may be slightly confusing now, but intel_dp_link_rate_index()
will go away in follow-up patches.
v2: Use name intel_dp_rate_index (Dhinakaran)
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/c7b6197aaa12e368a0d024dc142fa574fd0443a7.1490712890.git.jani.nikula@intel.com
We shouldn't silently use the first element if we can't find the rate
we're looking for. Make rate_to_index() more generally useful, and
fallback to the first element in the caller, with a big warning.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/8a6e83b7bf35da0cbbc703ae157944107ff145be.1490712890.git.jani.nikula@intel.com
I can't think of a real world bug this could cause now, but this will be
required in follow-up work. While at it, change the parameter order to
be slightly more sensible.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/ff5b08f45a72c2247f5326b080027e2f5d8cc4ee.1490712890.git.jani.nikula@intel.com
i915 is currently doing a full GPU reset at the end of
i915_gem_suspend() followed by GuC suspend in i915_drm_suspend(). This
GPU reset clobbers the GuC, causing the suspend request to then fail,
leaving the GuC in an undefined state. We need to tell the GuC to
suspend before we do the direct intel_gpu_reset().
v2: Commit message update. (Chris, Daniele)
Fixes: 1c777c5d1d ("drm/i915/hsw: Fix GPU hang during resume from S3-devices state")
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491387710-20553-1-git-send-email-sagar.a.kamble@intel.com
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
It's too chatty to have three places to tell us which one
is next vgpu for schedule. My log file was bloated to eat
all disk space..
Cc: Ping Gao <ping.a.gao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
It just doesn't work. It probably stopped working way, way before that
(e.g. i915 grabbed random mutexes all over in modeset code at least
since gen6), but with atomic and all the ww_mutex stuff it's indeed
hopeless.
Remove ->mode_set_base_atomic from the 2 atomic drivers (i915 and
nouveau) that still had one (both had dummy implementations already
anyway), and shunt atomic drivers in the helpers debug_enter/leave
functions.
I'll leave the code in for radeon and amdgpu, but I think as soon as
amdgpu is atomic we should think about just ripping it out. Only
having it around for radeon and pre-nv50 is rather pointless. This
would also allow us to nuke all that code from fbdev.
Funny part is that _all_ kms drivers set this hook, despite that no
one else provides the required ->mode_set_base_atomic implementation.
The reason I'm jumping on this is that I want to wire up a full
acquire ctx for the benefit of atomic drivers, everywhere. And the
debug_enter/leave implementations call ->gamma_set. And there's just
no way ever we can create an acquire_ctx in the nmi context of kgdb.
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-11-daniel.vetter@ffwll.ch
Fix wrong initial csb read pointer value. This fixes the random
engine timeout issue in guest when guest boots up.
Fixes: 8453d674ae ("drm/i915/gvt: vGPU execlist virtualization")
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Min He <min.he@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We do set DRIVER_ATOMIC now.
Note that the comment is outdated, the property paths switched over to
checking drm_drv_uses_atomic_modeset() a while ago. Which means this
can't even break if we revert DRIVER_ATOMIC again.
v2: Add note that this is even safer (Maarten).
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-9-daniel.vetter@ffwll.ch
VLV/CHV watermarks are now able to handle the radiation, so
mark these platforms as ready for atomic.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303151928.23053-5-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The VLV/CHV watermark calculation is really interested in the hardware
plane type rather than the plane type (which is more of a software
concept). Let's check plane->id rather plane->type.
No functional changes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170303151928.23053-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Almost all other GuC fw definitions are using GUC|guc prefix.
While around, in get_core_family() change explicit WARN into MISSING_CASE
as it looks more appropriate, since GuC support capability we are controlling
by intel_device_info.has_guc flag.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170404133836.125736-1-michal.wajdeczko@intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Noticed this while I was looking at some debug output,
[drm:intel_hdmi_compute_config [i915]] picking bpc to 12 for HDMI output
[drm:intel_hdmi_compute_config [i915]] forcing pipe bpc to 36 for HDMI
I believe the second line should be pipe *bpp*
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491329765-14340-1-git-send-email-dhinakaran.pandiyan@intel.com
With all the callers of drm_modeset_lock_crtc gone, and all the places
it was formerly used properly wiring the acquire ctx through, we can
remove this.
The only hidden context magic we still have is now the global one.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-4-daniel.vetter@ffwll.ch
We're clearing the legacy_cursor_update flag before calling
drm_atomic_helper_setup_commit() which means the helper will
wait for the flip to complete before cleaning up the framebuffers.
That's not what we want for the legacy cursor, so let's clear
the flag after setting up the commit.
Also toss in a FIXME about solving these problems in a nicer
way using the fabled vblank workers.
v2: Also unsync with legacy page flips
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Rafael Ristovski <rafael.ristovski@gmail.com>
Fixes: a5509abda4 ("drm/i915: Fix legacy cursor vs. watermarks for ILK-BDW")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170329142123.5923-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
On last guc/huc cleanup series we've simplified guc init hw
function but missed the one for the huc. While here, change
its signature as we don't care about huc loading status.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170331115709.181940-1-michal.wajdeczko@intel.com
If the engine is continually completing nops, we can saturate the
signaler and keep it working indefinitely. This angers the NMI watchdog!
A good example is to disable semaphores on snb and run igt/gem_exec_nop -
the parallel, multi-engine workloads are more than sufficient to hog the
CPU, preventing the system from even processing ICMP echo replies.
v2: Tvrtko dug into cond_resched() on x86 and found that it only
depended upon preempt_count and not tif_need_resched() - which means
that we would always call schedule() at that point.
Fixes: c81d46138d ("drm/i915: Convert trace-irq to the breadcrumb waiter")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170404120531.10737-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
If the signal to park arrives before we sleep, then we need to check
kthread_should_park() before sleeping to avoid missing the signal.
Otherwise, if the signal arrives whilst we are processing completed
requests, we will reset the current->state back to TASK_INTERRUPTIBLE
and so miss the wakeup.
Fixes: fe3288b5da ("drm/i915: Park the breadcrumbs signaler across a GPU reset")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403105124.8969-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Rather than call intel_engine_cleanup() with a partially constructed
engine, unwind the error during intel_init_ring_common().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403113426.25707-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Or rather it is used only by intel_ring_pin() to extract the
drm_i915_private which we can easily pass in. As this is a relatively
rare operation, save the space in the struct, and as such it is even
break even in the extra code for passing around the parameter:
add/remove: 0/0 grow/shrink: 2/3 up/down: 15/-15 (0)
function old new delta
intel_init_ring_buffer 906 918 +12
execlists_context_pin 1308 1311 +3
mock_engine 407 403 -4
intel_engine_create_ring 367 363 -4
intel_ring_pin 326 319 -7
Total: Before=1261794, After=1261794, chg +0.00%
v2: Reorder intel_init_ring_buffer to keep the ring setup together:
add/remove: 0/0 grow/shrink: 2/3 up/down: 9/-15 (-6)
function old new delta
intel_init_ring_buffer 906 912 +6
execlists_context_pin 1308 1311 +3
mock_engine 407 403 -4
intel_engine_create_ring 367 363 -4
intel_ring_pin 326 319 -7
Total: Before=1261794, After=1261788, chg -0.00%
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403113426.25707-1-chris@chris-wilson.co.uk
drm-misc for 4.12:
Core:
- Removed some fb subsampling dimension checks from core (Ville)
- Some MST slot cleanup (Dhinakaran)
- Extracted drm_debugfs.h & drm_ioctl.h from drmP.h (Daniel)
- Added drm_atomic_helper_shutdown() to compliment suspend/resume counterparts
(Daniel)
- Pipe context through legacy modeset to remove legacy_backoff nasties (Daniel)
- Cleanups around vblank as well as allowing lockless counter reads (Chris W.)
- VGA Switcheroo added to MAINTAINERS with Lukas Wunner as reviewer (Lukas)
Drivers:
- Enhancements to rockchip driver probe (Jeffy) and dsi (Chris Z.)
- Thunderbolt external GPU awareness added (Lukas)
* tag 'drm-misc-next-2017-03-31' of git://anongit.freedesktop.org/git/drm-misc: (63 commits)
apple-gmux: Don't switch external DP port on 2011+ MacBook Pros
drm/nouveau: Don't register Thunderbolt eGPU with vga_switcheroo
drm/amdgpu: Don't register Thunderbolt eGPU with vga_switcheroo
drm/radeon: Don't register Thunderbolt eGPU with vga_switcheroo
PCI: Recognize Thunderbolt devices
MAINTAINERS: Add Lukas Wunner as reviewer for vga_switcheroo
drm: Fix locking gotcha in page_flip ioctl
drm: Clarify the role of plane_state argument to drm_simple update().
drm: Clear e after kfree in drm_mode_page_flip_ioctl
drm: Convert cmpxchg(bool) back to a two step operation
drm/bridge: ti-tfp410: support hpd via gpio
drm: use .hword to represent 16-bit numbers
Revert unrelated part of "drm: simplify the locking in the GETCRTC ioctl"
drm: Fixup failure paths in drm_atomic_helper_set_config
drm: Peek at the current counter/timestamp for vblank queries
drm: Refactor vblank sequence number comparison
drm: vblank cannot be enabled if dev->irq_enabled is false
drm: Mark up accesses of vblank->enabled outside of its spinlock
drm: Make the decision to keep vblank irq enabled earlier
drm/atomic-helper: Remove the backoff hack from set_config
...
Firmware loading interface for GVT-g golden HW state has been broken
before. This patch fixes GVT-g firmware loading interface. A user should
apply this patch if he wants to load GVT-g golden HW state from firmware
interface.
Fixes: 579cea5 ("drm/i915/gvt: golden virtual HW state management")
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
commit 8490ae207f ("drm/i915: Suppress busy status for engines if
wedged") moved the check for inflight requests to the
intel_engines_are_idle() check to protect the idle worker. However, the
request selftests were also checking the engine idle status and erroring
out if they did not become idle within a short period of time after the
final wait. In order to accommodate the new check, call retire requests
prior to the engine check so that we flush all the waits.
Fixes: 8490ae207f ("drm/i915: Suppress busy status for engines if wedged")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170331192121.10024-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
We can rely on compiler to notify us if we miss any case.
This approach may also reduce driver size (reported ~4K).
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170331102652.177664-1-michal.wajdeczko@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We can merge the pair of loops over the engines and their timelines into
a single loop, making it easier to read and more consistent with the
commentary.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330145041.9005-6-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Having added the wait upon each engine to idle into the central
i915_gem_wait_for_idle(), we can remove the now redundant wait from
reset_all_global_seqno(). This has the advantage of removing the late
detection of an error (an engine still busy) which left the seqno reset
only partially complete (though it should be safe enough!).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330145041.9005-5-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Make i915_gem_wait_for_idle() be a little heavier in order to try and
guarantee that the GPU is indeed idle (by checking each engine
individually is idle, i.e. all writes are complete and the rings
stopped) after waiting for in-flight requests to be completed.
v2: And return the final error.
v3: Break the wait_for() out from under the WARN -- the macro expansion
is hideous and unreadable in the warning message
v4: If wait_for_engine() fails the result is catastrophic, mark the
device as wedged and wait for the repair team.
References: https://bugs.freedesktop.org/show_bug.cgi?id=98836
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330145041.9005-4-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
As we now distinguish everywhere that can call
i915_gem_retire_requests() following a successful wait_for_idle, we can
remove the duplication by moving that call into i915_gem_wait_for_idle()
itself.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330145041.9005-3-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Michał Winiarski pointed out that the debugging infrastructure (such as
trace_dma_fence_release) likes to pretty print the timeline name, long
after we have freed the timeline. Our timelines currently live as part of
the GTT (due to the strict ordering we currently use through each) which
belong to the context. We aim to free the context and release its
hardware resources as soon as we able to (i.e. when the last
fence/request using it has been signaled and retired). As the
.get_timeline_name is purely a debug feature, rather than extending the
lifetime of the context, or splitting it into many different release
phases just to keep the name around, replace the timeline name with a
constant after the fence has been signaled. This avoids the potential
use-after-free.
Reported-by: Krzysztof Olinski <krzysztof.e.olinski@intel.com>
Fixes: 80b204bce8 ("drm/i915: Enable multiple timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: http://patchwork.freedesktop.org/patch/msgid/20170330111614.29757-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 05506b5be0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Since commit 1233e2db19 ("drm/i915: Move object backing storage
manipulation to its own locking"), i915_gem_object_put_pages() and
specifically the i915_gem_gtt_finish_pages() may be called from outside
of the struct_mutex and so we can no longer pass I915_WAIT_LOCKED to
i915_gem_wait_for_idle.
Fixes: 1233e2db19 ("drm/i915: Move object backing storage manipulation to its own locking")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.10+
Link: http://patchwork.freedesktop.org/patch/msgid/20170330085341.20311-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 228ec87ccd)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The variable info is never NULL, which is checked by the caller. This
patch removes the redundant info NULL check logic.
Fixes: 695fbc08d8 ("drm/i915/gvt: replace the gvt_err with gvt_vgpu_err")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
(cherry picked from commit 865f03d42e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From commit d1a513be1f ("drm/i915/gvt: add resolution definition for vGPU
type"), small type has been restricted to small resolution, so not
require larger high GM size any more. Change to smaller 384M for more
VM creation with vGPU enabled which still perform reasonable workload.
Fixes: d1a513be1f ("drm/i915/gvt: add resolution definition for vGPU type")
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
(cherry picked from commit bf39ec335e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Unlocking is dangerous. In this case we combine an early update to the
out-of-queue request, because we know that it will be inserted into the
correct FIFO priority-ordered slot when it becomes ready in the future.
However, given sufficient enthusiasm, it may become ready as we are
continuing to reschedule, and so may gazump the FIFO if we have since
dropped its spinlock. The result is that it may be executed too early,
before its dependencies.
v2: Move all work into the second phase over the topological sort. This
removes the shortcut on the out-of-rbtree request to ensure that we only
adjust its priority after adjusting all of its dependencies.
Fixes: 20311bd350 ("drm/i915/scheduler: Execute requests in order of priorities")
Testcase: igt/gem_exec_whisper
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: http://patchwork.freedesktop.org/patch/msgid/20170327202143.7972-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit a79a524e92)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
There is no reason to separately check for valid fw path before
we try to fetch it. Let the fetch function take care of this.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330112115.120240-2-michal.wajdeczko@intel.com
This function is no longer used. Its functionality is covered
by intel_uc_fini_fw().
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cleanups of uc firmware structs from GuC and Huc are the same for both.
Move common code to the helper function to avoid duplication.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Some of the DRM_NOTE messages are just using "uC" without specifying
which uc they are related to. We can be more user friendly.
v2: moved to the header (Joonas)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Add description for existing parameter 'pipe' to fix the build
warning: ./drivers/gpu/drm/i915/intel_lpe_audio.c:342: warning: No
description found for parameter 'pipe'.
Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330115510.14054-1-diaconita.tamara@gmail.com
If the driver is wedged, HW state may be very inconsistent and
report that it is still busy, even though we have stopped using it. This
can lead to a double *ERROR* rather than a graceful cleanup after
wedging.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330145041.9005-2-chris@chris-wilson.co.uk
As we declare an engine as wedged, we mark all of its active requests as
in error. However, we don't want to mark successfully completed requests
as in error, which requires us to retire those requests first.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330145041.9005-1-chris@chris-wilson.co.uk
We pretty print the name of an engine in several places, mostly for
debug, but also in the GPU hang report. Using "ring" in the name is
archaic (we call those engines now to differentiate them from the
multiple rings of commands we execute on each engine), quite verbose and
often tautological. We run out of room in our GPU hang report for
instance if we have more than a couple of engines hung simultaneously.
Bit the bullet and update the strings to reflect the common internal names.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170330134820.12273-1-chris@chris-wilson.co.uk
Michał Winiarski pointed out that the debugging infrastructure (such as
trace_dma_fence_release) likes to pretty print the timeline name, long
after we have freed the timeline. Our timelines currently live as part of
the GTT (due to the strict ordering we currently use through each) which
belong to the context. We aim to free the context and release its
hardware resources as soon as we able to (i.e. when the last
fence/request using it has been signaled and retired). As the
.get_timeline_name is purely a debug feature, rather than extending the
lifetime of the context, or splitting it into many different release
phases just to keep the name around, replace the timeline name with a
constant after the fence has been signaled. This avoids the potential
use-after-free.
Reported-by: Krzysztof Olinski <krzysztof.e.olinski@intel.com>
Fixes: 80b204bce8 ("drm/i915: Enable multiple timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: http://patchwork.freedesktop.org/patch/msgid/20170330111614.29757-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Since commit 1233e2db19 ("drm/i915: Move object backing storage
manipulation to its own locking"), i915_gem_object_put_pages() and
specifically the i915_gem_gtt_finish_pages() may be called from outside
of the struct_mutex and so we can no longer pass I915_WAIT_LOCKED to
i915_gem_wait_for_idle.
Fixes: 1233e2db19 ("drm/i915: Move object backing storage manipulation to its own locking")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.10+
Link: http://patchwork.freedesktop.org/patch/msgid/20170330085341.20311-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The should happen as soon as possible, but always within the logic that
depends on it (and not interrupting the top-level driver control flow).
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490720027-23234-1-git-send-email-oscar.mateo@intel.com
When test GVTg as below scenario:
VM boot --> failsafe --> kill qemu --> VM boot.
Qemu report error at the second boot:
ERROR: PCI region size must be pow2 type=0x0, size=0x1fa1000
Qemu need access PCI_ROM_ADDRESS reg to determine the size of expansion
PCI rom. The mechanism just like the BAR reg (write-read) and we should
return the size 0 since we have no rom. If we reject the write to
PCI_ROM_ADDRESS, Qemu cannot get the correct size of rom.
Essentially, GVTg failsafe mode should not break PCI function. So we
exclude cfg space from failsafe mode. This can fix above issue.
v2: add Fixes and Bugzilla link.
Fixes: fd64be6367 ("drm/i915/gvt: introduced failsafe mode into vgpu")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100296
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
v2 of the commit 2c77bb29d3 ("drm: simplify the locking in the GETCRTC ioctl")
accidentally introduced a unrelated change in intel_display.c, revert the
unrelated change.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 2c77bb29d3 ("drm: simplify the locking in the GETCRTC ioctl")
Reported-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/6be47261-475f-c190-af56-c136677246d9@linux.intel.com
This patch introduces two functions for activating/de-activating vGPU in
mdev ops.
A racing condition was found between virtual vblank emulation and KVGMT
mdev release path. V-blank emulation will emulate and inject V-blank
interrupt for every active vGPU with holding gvt->lock, while in mdev
release path, it will directly release hypervisor handle without changing
vGPU status or taking gvt->lock, so a kernel oops is encountered when
vblank emulation is injecting a interrupt with a invalid hypervisor
handle. (Reported by Terrence)
To solve this problem, we factor out vGPU activation/de-activation from
vGPU creation/destruction path and let KVMGT mdev release ops de-activate
the vGPU before release hypervisor handle. Once a vGPU is de-activated,
GVT-g will not emulate v-blank for it or touch the hypervisor handle.
Fixes: 659643f ("drm/i915/gvt/kvmgt: add vfio/mdev support to KVMGT")
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The timeslice usage will determine vGPU whether has chance to
schedule or not at every vGPU switch checkpoint.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
vGPU resource is allocated by scheduler. To account for non-allocated
free cycles, we create an idle vGPU as the placeholder similar to idle task
concept, which is useful to handle some corner cases in scheduling policy.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This method tries to guarantee precision in second level, with the
adjustment conducted in every 100ms. At the end of each vGPU switch
calculate the sched time and subtract it from the time slice
allocated; the allocated time slice for every 100ms together with
remaining timeslice, will be used to decide how much timeslice
allocated to this vGPU in the next 100ms slice, with the end goal
to guarantee weight ratio in second level.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The weight defines proportional control of physical GPU resource
shared between vGPUs. So far the weight is tied to a specific vGPU
type, i.e when creating multiple vGPUs with different types, they
will inherit different weights.
e.g. The weight of type GVTg_V5_2 is 8, the weight of type GVTg_V5_4
is 4, so vGPU of type GVTg_V5_2 has double vGPU resource of vGPU type
GVTg_V5_4.
TODO: allow user control the weight setting in the future.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Factor out the scheduler to a more clear structure, the basic
logic is to find out next vGPU first and then schedule it.
vGPUs were ordered in a LRU list, scheduler scan from the LRU
list head and choose the first vGPU who has pending workload.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Add some statistic routine to collect the time when vGPU is
scheduled in/out and the time of the last ctx submission.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Currently the scheduler is triggered by delayed_work, which doesn't
provide precision at microsecond level. Move to hrtimer instead for
more accurate control.
Signed-off-by: Ping Gao <ping.a.gao@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The variable info is never NULL, which is checked by the caller. This
patch removes the redundant info NULL check logic.
Fixes: 695fbc08d8 ("drm/i915/gvt: replace the gvt_err with gvt_vgpu_err")
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
From commit d1a513be1f ("drm/i915/gvt: add resolution definition for vGPU
type"), small type has been restricted to small resolution, so not
require larger high GM size any more. Change to smaller 384M for more
VM creation with vGPU enabled which still perform reasonable workload.
Fixes: d1a513be1f ("drm/i915/gvt: add resolution definition for vGPU type")
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
If the request->wa_tail is 0 (because it landed exactly on the end of
the ringbuffer), when we reconstruct request->tail following a reset we
fill in an illegal value (-8 or 0x001ffff8). As a result, RING_HEAD is
never able to catch up with RING_TAIL and the GPU spins endlessly. If
the ring contains a couple of breadcrumbs, even our hangcheck is unable
to catch the busy-looping as the ACTHD and seqno continually advance.
v2: Move the wrap into a common intel_ring_wrap().
Fixes: a3aabe86a3 ("drm/i915/execlists: Reinitialise context image after GPU hang")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: http://patchwork.freedesktop.org/patch/msgid/20170327130009.4678-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
(cherry picked from commit 450362d3fe)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170329121315.1290-1-chris@chris-wilson.co.uk
This reverts commit 6c943de668 ("drm/i915: Skip execlists_dequeue()
early if the list is empty").
The validity of using READ_ONCE there depends upon having a mb to
coordinate the assignment of engine->execlist_first inside
submit_request() and checking prior to taking the spinlock in
execlists_dequeue(). We wrote "the update to TASKLET_SCHED incurs a
memory barrier making this cross-cpu checking safe", but failed to
notice that this mb was *conditional* on the execlists being ready, i.e.
there wasn't the required mb when it was most necessary!
We could install an unconditional memory barrier to fixup the
READ_ONCE():
diff --git a/drivers/gpu/drm/i915/intel_lrc.c
b/drivers/gpu/drm/i915/intel_lrc.c
index 7dd732cb9f57..1ed164b16d44 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -616,6 +616,7 @@ static void execlists_submit_request(struct
drm_i915_gem_request *request)
if (insert_request(&request->priotree, &engine->execlist_queue))
{
engine->execlist_first = &request->priotree.node;
+ smp_wmb();
if (execlists_elsp_ready(engine))
But we have opted to remove the race as it should be rarely effective,
and saves us having to explain the necessary memory barriers which we
quite clearly failed at.
Reported-and-tested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Fixes: 6c943de668 ("drm/i915: Skip execlists_dequeue() early if the list is empty")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170329100052.29505-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Don't throw a warning if we are given an invalid property id. While
here let's also bring back Robert' original idea of catching unhandled
enumeration values at compile time.
Fixes: eec688e142 ("drm/i915: Add i915 perf infrastructure")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Robert Bragg <robert@sixbynine.org>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327203236.18276-1-matthew.auld@intel.com
(cherry picked from commit 0a309f9e3d)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If we were to ever encounter a sample_flags mismatch we need to ensure
we destroy the stream when we bail.
Fixes: d79651522e ("drm/i915: Enable i915 perf stream for Haswell OA unit")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327203459.18398-1-matthew.auld@intel.com
(cherry picked from commit 22f880ca82)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Old devices have quite severe restrictions for using fences, and unlike
more recent device (anything from Pineview onwards) we need to enforce
those restrictions even for unfenced tiled access from the render
pipeline.
Fixes: 944397f04f ("drm/i915: Store required fence size/alignment for GGTT vma")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.11-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170325113243.16438-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit f4ce766f28)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Unlocking is dangerous. In this case we combine an early update to the
out-of-queue request, because we know that it will be inserted into the
correct FIFO priority-ordered slot when it becomes ready in the future.
However, given sufficient enthusiasm, it may become ready as we are
continuing to reschedule, and so may gazump the FIFO if we have since
dropped its spinlock. The result is that it may be executed too early,
before its dependencies.
v2: Move all work into the second phase over the topological sort. This
removes the shortcut on the out-of-rbtree request to ensure that we only
adjust its priority after adjusting all of its dependencies.
Fixes: 20311bd350 ("drm/i915/scheduler: Execute requests in order of priorities")
Testcase: igt/gem_exec_whisper
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: http://patchwork.freedesktop.org/patch/msgid/20170327202143.7972-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
We can't sometimes use these macros in other headers due to
include and definition order. As i915_utils.h already contains
other helper macros move these macros there.
v2: checkpatch cleanup for WARN() macro.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170328084513.174200-1-michal.wajdeczko@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
No need to grab both plane and crtc locks at the same time, we can do
them one after the other. If userspace races it'll get what it
deserves either way.
This removes another user of drm_modeset_lock_crtc. There's only one
left.
v2: Make sure all access to primary->state is properly protected
(Harry).
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170328070145.21520-1-daniel.vetter@ffwll.ch
intel_shadow_wa_ctx is a field of intel_vgpu_workload. container_of() can
be used to refine the relation-ship between intel_shadow_wa_ctx and
intel_vgpu_workload. This patch removes the useless dereference.
v2. add "drm/i915/gvt" prefix. (Zhenyu)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Turn on KBL WS platform support in gvt-g. More platforms would be
enabled, after validate.
Signed-off-by: Xu Han <xu.han@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This adds initial attribute group for mdev to hold vGPU related
for each mdev device, currently just vGPU id is shown.
v2: rename group name as "intel_vgpu"
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
GVT-g will emulate a fixed DPCD data to VM for DP/eDP panel. Update
this data to latest DP1.2 with the maximum lane bandwidth of 5.4G/s
to support 4K resolution in VM.
V3: modify patch comment
V2: add inline comment to describe the dpcd_fix_data.
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Initialize the correct vreg for virtual monitor.
Set PG0/1/2 distribution and fuse download done in SKL_FUSE_STATUS.
Set PLL_ENABLE and PLL_LOCK in LCPLL_CTL.
Guest may need to check these registers for display monitor detection
on Skylake platforms.
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Backmerge drm-next one more because Dave fumbled the conflict
resolution slightly and I didn't notice it. We need Zhenyu's hotfix
before he can assemble the gvt pull ...
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Just rolling it out, no code change here.
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-3-daniel.vetter@ffwll.ch
From commit 73dec95e6b ("drm/i915: Emit to ringbuffer directly"),
copy_gma_to_hva() now returns copied data length instead of 0, so
need to change error return check for that.
Note: Looks this is caused by backmerge conflict resolving, so
4.11-rc4 is not impacted as commit 73dec95e6b ("drm/i915: Emit to
ringbuffer directly") is not in 4.11. But need to fix this before I
can apply 4.12 stuff against drm-intel-next correctly.
Fixes: e5c1ff1475 ("Backmerge tag 'v4.11-rc4' into drm-next")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Several major vendor USB-C->HDMI converters, in particular the DA200,
fail to recover a 5.4 GHz 1 lane signal if the link N is greater than
0x80000.
The link M and N depend on the pixel clock and link clock ratio. With
current code link N exceeds 0x80000 only when link clock >= 540000
kHz. Except for the eDP intermediate link clocks, at least the four
least significant bits are always zero. Just one bit shift right would
be enough to bring even the DP 1.4 810000 kHz link clock under 0x80000
link N. The pixel clock for modes that require a link clock >= 540000
kHz would also have several least significant bits zero. Unless the user
provides a mode with an odd pixel clock value, we can reduce the numbers
to reach the goal, with no loss in precision.
The DP spec even mentions sources making choices that "allow for static
and relatively small Mvid and Nvid values", thus reducing the link M/N
regardless of the sink in question seems justified.
Everything here is based on the work and information gathered by Clint
Taylor <clinton.a.taylor@intel.com>. This is just an iteration to reduce
the parameters regardless of lane count, link rate, or sink.
Reference: http://patchwork.freedesktop.org/patch/msgid/1490225256-11667-1-git-send-email-clinton.a.taylor@intel.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93578
Tested-by: Mads <mads@ab3.no>
Tested-by: PJ <foobar@pjmodos.net>
Tested-by: François Guerraz <kubrick@fgv6.net>
Tested-by: Lev Popov <leo@nabam.net>
Tested-by: Igor Krivenko <igor.s.krivenko@gmail.com>
Tested-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490614405-23337-1-git-send-email-jani.nikula@intel.com
Capturing GPU state requires the device to be awake in order to read
registers. Normally, this is taken along the error handler, but for the
direct debugfs access, we cannot make assumptions about the current
device state and so either need to wake it up, or abort.
Fixes: 5a4c6f1b1b ("drm/i915: The return of i915_gpu_info to debugfs")
Testcase: igt/pm_rpm/debugfs-read
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170328131407.14863-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
We don't expect the core runtime PM get helpers to return any error, so
add a WARN for this. Also print the return value for all the callsites
to help debugging.
v2:
- Don't call pm_runtime_get_sync() as part of initing locals. (Chris)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1490693935-12638-1-git-send-email-imre.deak@intel.com
Don't throw a warning if we are given an invalid property id. While
here let's also bring back Robert' original idea of catching unhandled
enumeration values at compile time.
Fixes: eec688e142 ("drm/i915: Add i915 perf infrastructure")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Robert Bragg <robert@sixbynine.org>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327203236.18276-1-matthew.auld@intel.com
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJY2C9qAAoJEHm+PkMAQRiGaBQIAIGzdlZ6ImiP6zoukrRv7qUr
44ITm0lsBiL85QGedhQQL+Y9UqwUmlqgFqnH0Gr8YHNbLJWXzdjGbl5aVo4KjASq
104NLUDXtPww/xZdH4wJMzhuwucYwZOUyDOjOr0ak3cGxOE2xjNjHMZXxWUf20GO
EpRr6WhV1DUAvAdjdNa9KlcOjMluNpMLLyL1CFLjrkkArrWAyqOURKHAb6ZLghfv
iZV1qJTVPyYGpnlI3kuEgu2GuDjxqpoNLSr3wHyEHm/pBPEl7MX6zPbzcegBV8TY
cRRlXo4notdsuknmSNcj0hHuTQvw1kl7BhieLKVsnCyCIM6jjX4TSQZFutmbzwM=
=5iRl
-----END PGP SIGNATURE-----
Backmerge tag 'v4.11-rc4' into drm-next
Linux 4.11-rc4
The i915 GVT team need the rc4 code to base some more code on.
If we were to ever encounter a sample_flags mismatch we need to ensure
we destroy the stream when we bail.
Fixes: d79651522e ("drm/i915: Enable i915 perf stream for Haswell OA unit")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327203459.18398-1-matthew.auld@intel.com
Geminilake has a native HDMI 2.0 controller, which is capable of
driving clocks upto 594Mhz. This patch updates the max tmds clock
limit for the same.
V2: rebase
V3: rebase
V4: added r-b from Ander
V5: rebase
V6: rebase
V7: rebase
V8: rebase
V9: rebase
V10: rebase
Cc: Ander Conselvan De Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Ander Conselvan De Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-7-git-send-email-shashank.sharma@intel.com
Geminilake platform sports a native HDMI 2.0 controller, and is
capable of driving pixel-clocks upto 594Mhz. HDMI 2.0 spec
mendates scrambling for these higher clocks, for reduced RF footprint.
This patch checks if the monitor supports scrambling, and if required,
enables it during the modeset.
V2: Addressed review comments from Ville:
- Do not track scrambling status in DRM layer, track somewhere in
driver like in intel_crtc_state.
- Don't talk to monitor at such a low layer, set monitor scrambling
in intel_enable_ddi() before enabling the port.
V3: Addressed review comments from Jani
- In comments, function names, use "sink" instead of "monitor",
so that the implementation could be close to the language of
HDMI spec.
V4: Addressed review comment from Maarten
- scrambling -> hdmi_scrambling
- high_tmds_clock_ratio -> hdmi_high_tmds_clock_ratio
V5: Addressed review comments from Ville and Ander
- Do not modifiy the crtc_state after compute_config. Move all
scrambling and tmds_clock_ratio calcutations to compute_config.
- While setting scrambling for source/sink, do not check the
conditions again, just go by the crtc_state flags. This will
simplyfy the condition checks.
V6: Addressed review comments from Ville
- Do not add IS_GLK check in disable/enable function, instead add it
in compute_config, while setting state flags.
- Remove unnecessary paranthesis.
- Simplyfy handle_sink_scrambling function as suggested.
- Add readout code for scrambling status in get_ddi_config and add a
check for the same in pipe_config_compare.
V7: Addressed review comments from Ander/Ville
- No separate function for source scrambling, make it inline
- Align the last line of the macro TRANS_DDI_HDMI_SCRAMBLING_MASK
- Do not add platform check while setting source scrambling
- Use pipe_config instead of crtc->config to set sink scrambling
- To readout scrambling status, Compare with SCRAMBLING_MASK
not any of its bits
- Remove platform check in intel_pipe_config_compare while checking
scrambling status
V8: Fixed mege conflict, Addressed review comments from Ander
- Remove the desciption/comment about scrambling fom the caller, move
it to the function
- Move the IS_GLK check into scrambling function
- Fix alignment
V9: Fixed review comments from Ville, Ander
- Pass the scrambling state variables as bool input to the sink_scrambling
function and let the disable call be unconditional.
- Fix alignments in function calls and debug messages.
- Add kernel doc for function intel_hdmi_handle_sink_scrambling
V10: Rebase
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-6-git-send-email-shashank.sharma@intel.com
All it does is pick the encoder and call intel_get_shared_dpll(). We
can just do this in the caller. One less indirection level during code
reading.
As another plus, now the two callers of intel_get_shared_dpll() are
{ironlake,haswell}_crtc_compute_clock().
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490209125-20046-2-git-send-email-paulo.r.zanoni@intel.com
Use the incoming value from debugfs/i915_wedged to select which engines
to marked as guilty in order to force us to reset those requests
(required to quickly bypass simulated hangs).
Testcase: igt/gem_exec_capture
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170325134735.30581-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Whilst I like having the assertions clearly visible in the code, they
are quite repetitious! As we find new limits we want to incorporate into
the set of assertions, it make sense to refactor them to a common
routine.
v2: Add a guc holdout.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327131412.20293-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
If the request->wa_tail is 0 (because it landed exactly on the end of
the ringbuffer), when we reconstruct request->tail following a reset we
fill in an illegal value (-8 or 0x001ffff8). As a result, RING_HEAD is
never able to catch up with RING_TAIL and the GPU spins endlessly. If
the ring contains a couple of breadcrumbs, even our hangcheck is unable
to catch the busy-looping as the ACTHD and seqno continually advance.
v2: Move the wrap into a common intel_ring_wrap().
Fixes: a3aabe86a3 ("drm/i915/execlists: Reinitialise context image after GPU hang")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: http://patchwork.freedesktop.org/patch/msgid/20170327130009.4678-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
All the pre-SKL sprite planes compute the x/y/tile offsets in a
similar way. There are a couple of minor differences but the primary
planes have those as well. Thus i9xx_check_plane_surface()
already does what we need, so let's use it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-7-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
The effective difference between i9xx_update_primary_plane()
and ironlake_update_primary_plane() is only the HSW/BDW
DSPOFFSET special case. So bring that over into
i9xx_update_primary_plane() and eliminate the duplicated code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-6-ville.syrjala@linux.intel.com
Extract the primary plane surfae offset/x/y calculations for
pre-SKL platforms into a common function, and call it during the
atomic check phase to reduce the amount of stuff we have to do
during the commit phase. SKL is already doing this.
v2: Update the comment about the rotation adjustments to
match the code better (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-5-ville.syrjala@linux.intel.com
Computing the plane control register value is branchy so moving it out
from the plane commit hook seems prudent. Let's pre-compute it during
the atomic check phase and store the result in the plane state.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-4-ville.syrjala@linux.intel.com
Share the code to compute the primary plane control register value
between the i9xx and ilk codepaths as the differences are minimal.
Actually there are no differences between g4x and ilk, so the
current split doesn't really make any sense.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Pull the code to calculate the pre-SKL primary plane control register
value into separate functions. Allows us to pre-compute it in the
future.
v2: Split the pre-ilk vs. ilk+ unification to a separate patch (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
intel_flush_status_page() is defunct since commit f8dd2934c4
("drm/i915: Remove BXT incoherent seqno write workaround"), time to
remove it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170324163540.31981-2-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Not all of our target platforms have clflush. For those without, just
assume the status page is sufficiently coherent that we do not need our
paranoia.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 14a6bbf9e5 ("drm/i915: Replace irq_seqno_barrier on hws write with a clflush")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170324163540.31981-1-chris@chris-wilson.co.uk
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Old devices have quite severe restrictions for using fences, and unlike
more recent device (anything from Pineview onwards) we need to enforce
those restrictions even for unfenced tiled access from the render
pipeline.
Fixes: 944397f04f ("drm/i915: Store required fence size/alignment for GGTT vma")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.11-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/20170325113243.16438-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
We have only 8bits of precise timestamps in which to complete our
upper/load reads, along with the switch between precision. This is not
always enough time to read the upper counter twice within the same time
slice, leading to hard lockups. Limit the number of times to prevent
an inifite loop (my fault for assuming we would have no trouble doing
the write + reads fast enough).
Fixes: 47c21d9a1a ("drm/i915: Extend vlv/chv residency resolution")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100377
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170324165418.7455-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
I noticed that gcc was spilling the CSB to the stack, so rearrange the
code to be more compact. Spilling in this function is slightly more
interesting due to the mmio reads acting as memory barriers and so
end up flushing the stack spills. Still miniscule to having to do at
least the pair of uncached reads :(
function old new delta
intel_lrc_irq_handler 1039 878 -161
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170325201053.21306-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
There is no need to expose this function as it is called from
one function only. Also move it up to avoid forward declaration.
v2: drop intel_ prefix (Oscar) and rename to fetch_uc_fw (Michal)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327094510.167400-1-michal.wajdeczko@intel.com
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Commit e8a9c58fcd ("drm/i915: Unify active context tracking between
legacy/execlists/guc") converted the legacy intel_ringbuffer submission
to the same context pinning mechanism as execlists - that is to pin the
context until the subsequent request is retired. Previously it used the
vma retirement of the context object to keep itself pinned until the
next request (after i915_vma_move_to_active()). In the conversion, I
missed that the vma retirement was also responsible for marking the
object as dirty. Mark the context object as dirty when pinning
(equivalent to execlists) which ensures that if the context is swapped
out due to mempressure or suspend/hibernation, when it is loaded back in
it does so with the previous state (and not all zero).
Fixes: e8a9c58fcd ("drm/i915: Unify active context tracking between legacy/execlists/guc")
Reported-by: Dennis Gilmore <dennis@ausil.us>
Reported-by: Mathieu Marquer <mathieu.marquer@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99993
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100181
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.11-rc1
Link: http://patchwork.freedesktop.org/patch/msgid/20170322205930.12762-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 5d4bac5503)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The trouble here is that it does multiple atomic commits under one
drm_modeset_lock_all, which breaks the behind-the-scenes acquire
context magic that function pulls off. It's much better to have one
overall atomic commit. That we still have multiple atomic commits
prevents us from adding some pretty useful debug checks to the atomic
machinery.
Hence it is really a bad idea to call the legacy
drm_crtc_force_disable_all() function. There's 2 atomic drivers using
this still, nouveau and tinydrm. To fix this, introduce a new
drm_atomic_helper_shutdown() by extracting the code from i915.
While at it improve kernel-doc and catch future offenders by
sprinkling a WARN_ON into the legacy function. We should probably move
those into the legacy modeset helpers, too ...
v2: Make it compile on arm drivers too (Noralf).
v3: Correct kerneldoc to point at _disable_all().
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321164149.31531-1-daniel.vetter@ffwll.ch
The required number of dwords for semaphore emission on BDW RCS is 8,
not 6 - leading to ring buffer corruption and immediate GPU hangs when
using ringbuffer submission.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170324151724.32640-2-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
The forcewake_get call in the guc_send_mmio function was added to
avoid getting and releasing forcewake on each register access.
While this makes sense, all GuC registers are in the blitter range
so no need to wake all the wells.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490366919-34715-1-git-send-email-daniele.ceraolospurio@intel.com
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We only need to care about the ordering of the clearing of the bit with
the uncached CSB read in order to correctly detect a new interrupt
before the read completes. The uncached read itself acts as a full
memory barrier, so we do not need to enforce another in the form of a
locked clear_bit.
v2: Clarify why the split and unlocked test/clear is harmless.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323134803.10418-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
On SKL the planes are uniform so the "sprites" can use the
primary plane code perfectly fine. The only difference we
have is the color key handling, but since we never enable that
for the primary plane the same code works just fine.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317211808.14693-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
We are going to need it for future platforms.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
A GuC context and a HW context are in no way related, so the name "GuC context descriptor"
is very unfortunate, because a new reader of the code gets overwhelmed very quickly with
a lot of things called "context" that refer to different things. We can improve legibility
a lot by simply renaming a few objects in the GuC code.
v2:
- Rebased
- s/ctx_desc_pool/stage_desc_pool
- Move some explanations to the definition of the guc_stage_desc struct (Chris)
v3:
- Calculate gemsize with less intermediate steps (Joonas)
- Use BIT() macro (Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Some recent refactoring patches have left the doorbell creation outside
the GuC client allocation, which does not make a lot of sense (a client
without a doorbell is something useless). Move it back there, and
refactor the init_doorbell_hw consequently.
Thanks to this, we can do some other improvements, like hoisting the
check for GuC submission enabled out of the enable function.
v2: Rebased.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Doorbell release flow requires that we wait for GEN8_DRB_VALID bit to go
to zero after updating db_status before we call the GuC to release the
doorbell.
Kudos to Daniele for finding this out.
v2: WARN instead of DRM_ERROR (Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
While at it, fix a typo (s/ring_lcra/ring_lrca) and improve the naming of one
firware interface field (s/ring_tail/submit_element_info, since it can contain
more than just the ring tail).
No change in functionality.
v2:
- Remove reference to "unique user" of the GuC (Daniele)
- Keep mention to renaming from "GuC context" to "client" (Daniele)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Prepare for an alternate GuC communication interface.
v2: Make a few functions static and name them correctly while we are at it (Oscar), but
leave an intel_guc_send_mmio interface for users that require old-style communication.
v3: Send intel_uc_init_early back to the top (Michal).
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When initializing the GuC log struct, there is an object we need to
allocate always, since the GuC needs its address at fw load time.
The rest is only needed during runtime, in the sense that we only
create if we actually enable GuC logging. Make that distinction
explicit by subdividing further the intel_guc_log struct.
v2: Call the new struct "runtime", instead of "extras" (Joonas)
v3: Check indent (Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
It's mandatory and it gets created if and only if GuC submission is enabled, so that should be
the condition for informing the GuC about it.
Also s/guc_addon_create/guc_ads_create and s/guc_addon_destroy/guc_ads_destroy and, while
at it, add an explanation of what things go inside the ADS object.
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Starting with intel_guc_loader, down to intel_guc_submission
and finally to intel_guc_log.
v2:
- Null execbuf client outside guc_client_free (Daniele)
- Assert if things try to get allocated twice (Daniele/Joonas)
- Null guc->log.buf_addr when destroyed (Daniele)
- Newline between returning success and error labels (Joonas)
- Remove some unnecessary comments (Joonas)
- Keep guc_log_create_extras naming convention (Joonas)
- Helper function guc_log_has_extras (Joonas)
- No need for separate relay_channel create/destroy. It's just another extra.
- No need to nullify guc->log.flush_wq when destroyed (Joonas)
- Hoist the check for has_extras out of guc_log_create_extras (Joonas)
- Try to do i915_guc_log_register/unregister calls (kind of) symmetric (Daniele)
- Make sure initel_guc_fini is not called before init is ever called (Daniele)
v3:
- Remove unnecessary parenthesis (Joonas)
- Check for logs enabled on debugfs registration
- Rebase on top of Tvrtko's "Fix request re-submission after reset"
v4:
- Rebased
- Comment around enabling/disabling interrupts inside GuC logging (Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The GuC descriptor is big in size. If we use a local definition of
guc_desc we have a chance to overflow stack, so avoid it.
Also, Chris abhors scatterlists :)
v2: Rebased, helper function to retrieve the context descriptor,
s/ctx_pool_vma/ctx_pool/
v3: Zero out guc_context_desc before initialization
v4: Do not do arithmetic on void pointers (Daniele)
v5: Nicer than arithmetic on pointers (Chris, Joonas)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Started adding proper teardown to guc_client_alloc, ended up removing
quite a few dead ends where errors communicating with the GuC were
silently ignored. There also seemed to be quite a few erronous
teardown actions performed in case of an error (ordering wrong).
v2:
- Increase function symmetry/proximity (Michal/Daniele)
- Fix __reserve_doorbell accounting for high priority (Daniele)
- Call __update_doorbell_desc! (Daniele)
- Isolate __guc_{,de}allocate_doorbell (Michal/Daniele)
v3:
- "Select" a cacheline is a more accurate verb than "reserve" (Daniele).
- We cannot update & create the doorbell without reserving it first, so
move the whole doorbell creation for execbuf_client to the submission
enable (Oscar).i
- Add a fixme for ignoring possible doorbell destroy errors.
v4:
- Remove comment about is_high_priority (Daniele)
- Debug message typo (Daniele)
- Reuse __get_doorbell in more places (Daniele)
- Do not do arithmetic on void pointers (Daniele)
- Add comment to __reset_doorbell (Daniele)
v5:
- gccisms like arithmetic on void pointers are not frowned upon (Oscar)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Ensure that before we overwrite the reservation_object with our
exclusive fence for the pending clflush operation, that we do wait upon
all the fences in the current reservation_object.
Fixes: 57822dc6b9 ("drm/i915: Perform object clflushing asynchronously")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323085758.11695-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
We can relax the requirement upon ourselves that the forcewake is
released immediately and just allow it to occur naturally following our
mmio request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-5-chris@chris-wilson.co.uk
Use find-first-set bitop to quickly scan through the fw_domains mask and
skip iterating over unused domains.
v2: Move the WARN into the caller, to prevent compiler warnings in
normal builds.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-4-chris@chris-wilson.co.uk
In the next patch we will begin to sanity check that we do not attempt
to obtain the forcewake on an unsupport domain. However, that is exactly
what we do during reset of the fw_domains - rectify it before it explodes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-3-chris@chris-wilson.co.uk
In the next patch we will begin to sanity check that we do not attempt
to obtain the forcewake on an unsupport domain. However, that is exactly
what we do during our actual initialisation of fw_domains - rectify it
before it explodes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-2-chris@chris-wilson.co.uk
Pass along the drm_i915_private pointer from the caller, rather than
looking it up from each fw_domain during fw_domains_get/_put. This
allows us to then eliminate the backpointer, in exchange for a more
complicated unwrapping procedure in the rare
intel_uncore_fw_release_timer().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323101944.21627-1-chris@chris-wilson.co.uk
Commit e8a9c58fcd ("drm/i915: Unify active context tracking between
legacy/execlists/guc") converted the legacy intel_ringbuffer submission
to the same context pinning mechanism as execlists - that is to pin the
context until the subsequent request is retired. Previously it used the
vma retirement of the context object to keep itself pinned until the
next request (after i915_vma_move_to_active()). In the conversion, I
missed that the vma retirement was also responsible for marking the
object as dirty. Mark the context object as dirty when pinning
(equivalent to execlists) which ensures that if the context is swapped
out due to mempressure or suspend/hibernation, when it is loaded back in
it does so with the previous state (and not all zero).
Fixes: e8a9c58fcd ("drm/i915: Unify active context tracking between legacy/execlists/guc")
Reported-by: Dennis Gilmore <dennis@ausil.us>
Reported-by: Mathieu Marquer <mathieu.marquer@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99993
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100181
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.11-rc1
Link: http://patchwork.freedesktop.org/patch/msgid/20170322205930.12762-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Words cannot describe the embarrassment at creating a new gfp_t relaim to
only prevent the oomkiller but allow direct|kswapd reclaim, and then not
use it in the shmem_read_mapping_page_gfp().
Fixes: 24f8e00a8a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322223447.7493-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Resync with drm-next, I have a patch which currently can't be applied
because drm-misc-next lacked the latest drm/i915 code.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYzznuAAoJEHm+PkMAQRiGAzMIAJDBo5otTMMLhg8eKj8Cnab4
2NyaoWDN6mtU427rzEKEfZlTtp3gIBVdFex5x442weIdw6BgRQW0dvF/uwEn08yI
9Wx7VJmIUyH9M8VmhDtkUTFrhwUGr29qb3JhENMd7tv/CiJaehGRHCT3xqo5BDdu
xiyPcwSkwP/NH24TS91G87gV6r0I0oKLSAxu+KifEFESrb8gaZaduslzpEj3m/Ds
o9EPpfzaiGAdW5EdNfPtviYbBk7ZOXwtxdMV+zlvsLcaqtYnFEsJZd2WyZL0zGML
VXBVxaYtlyTeA7Mt8YYUL+rDHELSOtCeN5zLfxUvYt+Yc0Y6LFBLDOE5h8b3eCw=
=uKUo
-----END PGP SIGNATURE-----
BackMerge tag 'v4.11-rc3' into drm-next
Linux 4.11-rc3 as requested by Daniel
drm_dp_mst_allocate_vcpi() apart from setting up the vcpi structure,
also finds if there are enough slots available. This check is a duplicate
of that implemented in drm_dp_mst_find_vcpi_slots(). Let's move this check
out and reuse the existing drm_dp_mst_find_vcpi_slots() function to check
if there are enough vcpi slots before allocating them.
This brings the check to one place. Additionally drivers that will use MST
state tracking for atomic modesets can use the atomic version of
find_vcpi_slots() and reuse drm_dp_mst_allocate_vcpi()
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-4-git-send-email-dhinakaran.pandiyan@intel.com
Use intel_wm_plane_visible() to determine cursor visibility for SKL+
also. Previously SKL+ would check the actual visibility which now
conflicts with the assumptions in intel_legacy_cursor_update().
We also change SKL+ to compute the cursor watermarks based on the
unclipped cursor size, just as we do on all the other platforms.
Using the clipped size could now result in garbage results.
Testcase: igt/kms_chv_cursor_fail
Fixes: a5509abda4 ("drm/i915: Fix legacy cursor vs. watermarks for ILK-BDW")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100195
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170314151050.12194-2-ville.syrjala@linux.intel.com
Tested-by: Dorota Czaplejewicz <dorota.czaplejewicz@collabora.co.uk>
Tested-by: Jari Tahvanainen <jari.tahvanainen@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
All platforms that lack double buffered watermarks will need to
handle the legacy cursor updates in the same way. So let's extract the
logic to determine the plane visibility into a small helper. For
simplicity we'll make the function DTRT for any plane, but only apply
the special sauce for cursor planes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170314151050.12194-1-ville.syrjala@linux.intel.com
Tested-by: Dorota Czaplejewicz <dorota.czaplejewicz@collabora.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Since gfx allocations tend to be large, unmovable and disposable, report
the allocation failure back to userspace as an ENOMEM rather than incur
the oomkiller. We have already tried to make room by purging our own
cached gfx objects, and the oomkiller doesn't attribute ownership of gfx
objects so will likely pick the wrong candidate. Instead, let userspace
see the ENOMEM.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322110521.29930-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Because {hsw,skl,bxt}_ddi_pll_select all pretty much do the same thing
in slightly different ways. Replace everything with a simple copy of
the function and inline it inside intle_ddi_pll_select().
v2: s/return pll/return pll != NULL/ (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490209125-20046-1-git-send-email-paulo.r.zanoni@intel.com
According to BSpec, "The CD clock frequency must be at least twice the
frequency of the Azalia BCLK." and BCLK is configured to 96 MHz by
default. This check is needed because BXT and GLK support cdclk
frequencies less than 192 MHz.
v2: Include other Gen9 platforms too for completeness.(Paulo)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489531556-2926-1-git-send-email-dhinakaran.pandiyan@intel.com
Implement the DP-Audio cdclk restriction for GLK, similar to what is
implemented for BDW and other GEN9 platforms. The max. pixel clock
adjustment for GLK, however factors in the 2 pixels per clock output that
GLK generates.
Separating min. cdclk and max. pixel_rate would be nicer, but let's
defer that to future and fix the GLK bug for now.
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488931972-2865-1-git-send-email-dhinakaran.pandiyan@intel.com
In my previous Commit ab9da627906a ("drm/i915: make context status
notifier head be per engine") rely on scheduler->current_workload[x]
to distinguish gvt spacial request from i915 request. But this is
not always true since no synchronization between workload_thread and
lrc irq handler.
lrc irq handler workload_thread
---- ----
pick i915 requests;
intel_vgpu_submit_execlist();
current_workload[x] = xxx;
shadow_context_status_change();
Then current_workload[x] is not null but current request is of i915 self.
So instead we check ctx flag CONTEXT_FORCE_SINGLE_SUBMISSION. Only gvt
request set this flag and always set.
v2: Reverse the order of multi-condition 'if' statement.
Fixes: ab9da6279 ("drm/i915: make context status notifier head be per engine")
Signed-off-by: Changbin Du <changbin.du@intel.com>
Reviewed-by: Yulei Zhang <yulei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
GVTg has introduced the context status notifier to schedule the GVTg
workload. At that time, the notifier is bound to GVTg context only,
so GVTg is not aware of host workloads.
Now we are going to improve GVTg's guest workload scheduler policy,
and add Guc emulation support for new Gen graphics. Both these two
features require acknowledgment for all contexts running on hardware.
(But will not alter host workload.) So here try to make some change.
The change is simple:
1. Move the context status notifier head from i915_gem_context to
intel_engine_cs. Which means there is a notifier head per engine
instead of per context. Execlist driver still call notifier for
each context sched-in/out events of current engine.
2. At GVTg side, it binds a notifier_block for each physical engine
at GVTg initialization period. Then GVTg can hear all context
status events.
In this patch, GVTg do nothing for host context event, but later
will add a function there. But in any case, the notifier callback is
a noop if this is no active vGPU.
Since intel_gvt_init() is called at early initialization stage and
require the status notifier head has been initiated, I initiate it in
intel_engine_setup().
v2: remove a redundant newline. (chris)
Fixes: 3c7ba6359d ("drm/i915: Introduce execlist context status change notification")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100232
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170313024711.28591-1-changbin.du@intel.com
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 3fc03069bc)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321144720.17020-1-chris@chris-wilson.co.uk
Storing the position of the breadcrumb of the last retired request as
a separate last_retired_head is superfluous as we always copy that into
head prior to recalculation of the intel_ring.space.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321102552.24357-1-chris@chris-wilson.co.uk
Rather than impose the cost of a locked test before queuing a new
request, reduce it to a simple test_bit() with a following clear_bit()
prior to doing the CSB check. This ensure that if an interrupt does
occur whilst reading from the CSB, we still detect it (the interrupt
would trigger a rescheduling of the tasklet anyway).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321113320.2603-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
We get a warning with gcc-7 about a pointless comparison when
using a linear memmap:
drivers/gpu/drm/i915/selftests/scatterlist.c: In function 'alloc_table':
drivers/gpu/drm/i915/selftests/scatterlist.c:219:66: error: self-comparison always evaluates to false [-Werror=tautological-compare]
Splitting out the comparison into a separate function avoids the warning
and makes it slightly more obvious what happens.
Fixes: 935a2f776a ("drm/i915: Add some selftests for sg_table manipulation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320094335.1266306-2-arnd@arndb.de
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
As intel_engine_init_global_seqno() may be called by
nop_submit_request() from inside irq context, we have to use atomic
versions of kmap/kunmap. This is rare as this requires using gen8 legacy
ringbuffer submission.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320145609.4898-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
It has to be called after the global seqno has been assigned.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 31de73501a ("drm/i915/scheduler: emulate a scheduler for guc")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320132556.29286-1-tvrtko.ursulin@linux.intel.com
Sometimes guest driver will only update partial of the GGTT entry then
access it. In this situation a failure will happen while translating
the gpa to hpa.
Now in this situation we let the corresponding shadow entry pointing
to a scratch page.
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Xiaoguang Chen <xiaoguang.chen@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
It appears missing slaves on the i2c should cause 0xff to be returned
rather than 0. So, when the Windows driver tried to address a slave
at 0x40 and got 0’s back rather than 0xff’s it must have confused it.
Signed-off-by: Paul Durrant <Paul.Durrant@citrix.com>
Signed-off-by: Xu Han <xu.han@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Fix the wrong offset of the RCS specific mocs
Fixes: 1786571393 ("drm/i915/gvt: vGPU context switch")
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The trick of using an uncached mmio read to ensure that the GGTT writes
are flushed does not require us to do the forcewake dance, so avoid it
in the hope of reducing the frequency that we do keep the device forced
awake.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170318104257.694-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
When switching back to execlists, we also now need to restore the
tasklet handler.
Reported-by: Oscar Mateo <oscar.mateo@intel.com>
Fixes: 31de73501a ("drm/i915/scheduler: emulate a scheduler for guc")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170318102859.24101-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Guest will write mmio mbctl which need a special handler in gvt to
clear the bit 4 to inidcate the write operation success.
V2: use bit definition macro to make code readable.
Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The kvmgt code keeps a pointer to the struct kvm associated with the
device, but doesn't actually hold a reference to it. If we do unclean
shutdown testing (ie. killing the user process), then we can see the
kvm association to the device unset, which causes kvmgt to trigger a
device release via a work queue. Naturally we cannot guarantee that
the cached struct kvm pointer is still valid at this point without
holding a reference. The observed failure in this case is a stuck
cpu trying to acquire the spinlock from the invalid reference, but
other failure modes are clearly possible. Hold a reference to avoid
this.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org #v4.10
Cc: Jike Song <jike.song@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Since obj->active_count is only updated upon retirement, if we see an
active object in the batch pool, double check that is still active
before deciding to allocate a new object.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316132006.7976-3-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Do an early read of the execlists' queue before we take the spinlock and
start checking. This is safe as the first writer to the execlists queue
will cause the tasklet to be run again after a memory barrier.
v2: Keep guc in sync with execlists queue changes
v3: Explain the mb between the tasklet running on one cpu and the
execlist_first update and schedule from a second cpu.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317120716.17191-1-chris@chris-wilson.co.uk
i915_gem_stolen_list_info() sneakily takes advantage of the
obj->obj_exec_link to save itself from having to allocate. Enough of the
subterfuge, just allocate an array of pointers and sort them instead of
the list.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316132006.7976-7-chris@chris-wilson.co.uk
Before rc6 is initialised (after driver load or resume), the value inside
VLV_COUNTER_CONTROL is undefined so we cannot make an assertion that is
in HIGH_RANGE mode.
Fixes: 6b7f6aa75e ("drm/i915: Use coarse grained residency counter with byt")
Testcase: igt/drv_suspend/debugfs-reader
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317125918.11351-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Geminilake also supports pooled EUs. Enable it.
It is unclear if the recommendation to disable it for 2x6 configurations
from commit e015dd69b2 ("drm/i915/bxt: Add WaEnablePooledEuFor2x6")
should also apply to GLK, but it is applied anyway to be on the safe
side. That restriction can be lifted later if determined not to impact
performance.
The extra restriction should not impact user space either. The only user
space that uses this feature is Beignet, and it only does so for 3x6
devices. See See Beignet's commit 6901899ec90a ("Runtime: set the sub
slice according to kernel pooled EU configure.").
v2: Improve commit message. (Mika, Roy)
Cc: Arun Siluvery <arun.siluvery@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Yang Rong <rong.r.yang@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317140436.24645-1-ander.conselvan.de.oliveira@intel.com
The only time we need to emit a flush inside request emission is after
an execbuffer, for which we can use the full __i915_add_request(). All
other instances want the simpler i915_add_request() without flushing, so
remove the useless helper.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317114709.8388-1-chris@chris-wilson.co.uk
If we avoid initializing forcewake domains when running as
a guest, and also use gen2 mmio accessors in that case, we
can avoid the timer traffic and any looping through the
forcewake code which is currently just so it can end up in
the no-op forcewake implementation.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Weinan Li <weinan.z.li@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170310095747.12258-1-tvrtko.ursulin@linux.intel.com
[tursulin: commit spelling fix]
From commit a6508ded2a ("drm/i915: Use page coloring to provide the guard
page at the end of the GTT"), we no longer explicitly subtract guard page
at end for GGTT address space init, so shouldn't subtract that for vGPU
balloon too, as that will leave that end page to be available for
vGPU. Change balloon to cover full range too.
This fixes to use recent drm-intel tip kernel for guest OS. Found by GVT-g
cmd parser that guest kernel uses end page as scratch then try to run
MI_STORE_REG_MEM onto it.
v2: remove old comments
Cc: Terrence Xu <terrence.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170310022238.3191-1-zhenyuw@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Fix to correctly assign 1ms for gvt scheduler interval time,
as previous code using HZ is pretty broken. And use no delay
for start gvt scheduler function.
Fixes: 4b63960ebd ("drm/i915/gvt: vGPU schedule policy framework")
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: stable@vger.kernel.org # v4.10+
Acked-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
When handling guest request, GVT needs to populate/update shadow_ctx
with guest context. This behavior needs to make sure the shadow_ctx
is pinned. The current implementation is relying on i195 allocate request
to pin but this way cannot guarantee the i915 not to unpin the shadow_ctx
when GVT update the guest context from shadow_ctx. So GVT should pin/unpin
the shadow_ctx by itself.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The shadow indirect context image should be only scanned when valid.
So far, Only RCS ring has the shadow indirect context image. This patch
limits the scan logic only for RCS ring.
v2. refine description of the subject
v3. fix alignment. (Zhenyu)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The GVT-g needs execlists to be enabled otherwise gvt should be
disabled. Add a check for enable_execlists before enabling gvt.
v2: use DRM_INFO in response to the user action
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
commit 8f1117abb4 ("drm/i915/gvt: handle workload lifecycle properly")
includes some nonsense to retry a indefinite wait - i915_wait_request()
does not return until the request is completed when used from an
uninterruptible context.
Fixes: 8f1117abb4 ("drm/i915/gvt: handle workload lifecycle properly"
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
GGTT valid bit in pipe control command move to DWORD1 after SNB, so
change the valid check code correspondingly.
v2:
per Zhenyu's comment, replace the bit check with MACRO define
PIPE_CONTROL_GLOBAL_GTT_IVB
Signed-off-by: Yulei Zhang <yulei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
gvt_err should be used only for the very few critical error message
during host i915 drvier initialization. This patch
1. removes the redundant gvt_err;
2. creates a new gvt_vgpu_err to show errors caused by vgpu;
3. replaces the most gvt_err with gvt_vgpu_err;
4. leaves very few gvt_err for dumping gvt error during host gvt
initialization.
v2. change name to gvt_vgpu_err and add vgpu id to the message. (Kevin)
add gpu id to gvt_vgpu_err. (Zhi)
v3. remove gpu id from gvt_vgpu_err caller. (Zhi)
v4. add vgpu check to the gvt_vgpu_err macro. (Zhiyuan)
v5. add comments for v3 and v4.
v6. split the big patch into two, with this patch only for checking
gvt_vgpu_err. (Zhenyu)
v7. rebase to staging branch
v8. rebase to fix branch
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
this patch adds force non-priv registers check in LRI cmds handler
v4:
transform is_force_nonpriv_mmio() from macro to inline fuction to eliminate
checkpatch warning
v3:
per zhenyu's comment, fix some style warnings
v2:
per zhenyu's comment, refine the code to remove cascaded ifs
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
trace_i915_gem_request_out may be used after the request is completed,
and so the request may have been retired on another thread, invalidating
the rq->ctx. Avoid dereferencing rq->ctx in the tracepoint by switching
to the fence context id instead, updating all tracepoints to match.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316204235.27786-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
This should be impossible, but let's assert that we do not pin a context
4 billion times before retiring!
v2: Fix the assertion -- the patch had just one job to do!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316171628.3228-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Provide some serialisation between user operations by waiting for the
reset initiated by setting i915_wedged to complete.
The automatic wait here makes
echo 1 > i915_wedged; cat i915_error_state
do the right thing, and not risk reporting "No error collected".
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316171305.12972-4-chris@chris-wilson.co.uk
When we wedge the device, we override engine->submit_request with a nop
to ensure that all in-flight requests are marked in error. However, igt
would like to unwedge the device to test -EIO handling. This requires us
to flush those in-flight requests and restore the original
engine->submit_request.
v2: Use a vfunc to unify enabling request submission to engines
v3: Split new vfunc to a separate patch.
v4: Make the wait interruptible -- the third party fences we wait upon
may be indefinitely broken, so allow the reset to be aborted.
Fixes: 821ed7df6e ("drm/i915: Update reset path to fix incomplete requests")
Testcase: igt/gem_eio
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v3
Link: http://patchwork.freedesktop.org/patch/msgid/20170316171305.12972-3-chris@chris-wilson.co.uk
It turns out that we may want to restore the original
engine->submit_request (and engine->schedule) callbacks from more than
just the guc <-> execlists transition. Move this to a vfunc so we can
have a common interface.
v2: Move initial selection to intel_engines_init_common(), repaint vfunc
with engine->set_default_submission (and a similar colour for the
helper).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316171305.12972-2-chris@chris-wilson.co.uk
I915_RESET_IN_PROGRESS is being used for both signaling the requirement
to i915_mutex_lock_interruptible() to avoid taking the struct_mutex and
to instruct a waiter (already holding the struct_mutex) to perform the
reset. To allow for a little more coordination, split these two meaning
into a couple of distinct flags. I915_RESET_BACKOFF tells
i915_mutex_lock_interruptible() not to acquire the mutex and
I915_RESET_HANDOFF tells the waiter to call i915_reset().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316171305.12972-1-chris@chris-wilson.co.uk
GVTg has introduced the context status notifier to schedule the GVTg
workload. At that time, the notifier is bound to GVTg context only,
so GVTg is not aware of host workloads.
Now we are going to improve GVTg's guest workload scheduler policy,
and add Guc emulation support for new Gen graphics. Both these two
features require acknowledgment for all contexts running on hardware.
(But will not alter host workload.) So here try to make some change.
The change is simple:
1. Move the context status notifier head from i915_gem_context to
intel_engine_cs. Which means there is a notifier head per engine
instead of per context. Execlist driver still call notifier for
each context sched-in/out events of current engine.
2. At GVTg side, it binds a notifier_block for each physical engine
at GVTg initialization period. Then GVTg can hear all context
status events.
In this patch, GVTg do nothing for host context event, but later
will add a function there. But in any case, the notifier callback is
a noop if this is no active vGPU.
Since intel_gvt_init() is called at early initialization stage and
require the status notifier head has been initiated, I initiate it in
intel_engine_setup().
v2: remove a redundant newline. (chris)
Fixes: 3c7ba6359d ("drm/i915: Introduce execlist context status change notification")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100232
Signed-off-by: Changbin Du <changbin.du@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170313024711.28591-1-changbin.du@intel.com
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
This emulates execlists on top of the GuC in order to defer submission of
requests to the hardware. This deferral allows time for high priority
requests to gazump their way to the head of the queue, however it nerfs
the GuC by converting it back into a simple execlist (where the CPU has
to wake up after every request to feed new commands into the GuC).
v2: Drop hack status - though iirc there is still a lockdep inversion
between fence and engine->timeline->lock (which is impossible as the
nesting only occurs on different fences - hopefully just requires some
judicious lockdep annotation)
v3: Apply lockdep nesting to enabling signaling on the request, using
the pattern we already have in __i915_gem_request_submit();
v4: Replaying requests after a hang also now needs the timeline
spinlock, to disable the interrupts at least
v5: Hold wq lock for completeness, and emit a tracepoint for enabling signal
v6: Reorder interrupt checking for a happier gcc.
v7: Only signal the tasklet after a user-interrupt if using guc scheduling
v8: Restore lost update of rq through the i915_guc_irq_handler (Tvrtko)
v9: Avoid re-initialising the engine->irq_tasklet from inside a reset
v10: Hook up the execlists-style tracepoints
v11: Clear the execlists irq_posted bit after taking over the interrupt/tasklet
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316125619.6856-1-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Set byt rc residency counters high level as chv does by
default. We lose some accuracy on byt but we can do the calculation
without extra hw read on both platforms, as now they behave
identically in this respect.
v2: use ktime
v3: keep comparison u32 (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1489592584-10422-1-git-send-email-mika.kuoppala@intel.com
We have used cz timestamp register to gain a reference time wrt
to residency calculations. The residency counts are in cz clk ticks
(333Mhz clock) but for some reason the cz timestamp register gives
100us units. Perhaps for some other usage, the base-ten based values
are easier, but in residency calculations raw units would have been
the easiest.
As there is not much advantage of using base-ten clock through
a more costly punit access, take our reference times directly from
kernel clock.
v2: use ktime (Chris, Ville)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Use intel_rc6_residency to get benefit for increased resolution
in byt/chv.
v2: output raw and time (Chris)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Vlv and chv residency counters are 40 bits in width.
With a control bit, we can choose between upper or lower
32 bit window into this counter.
Lets toggle this bit on and off on and read both parts.
As a result we can push the wrap from 13 seconds to 54
minutes.
v2: commit msg, loop readability, goto elimination (Chris)
v3: bug ref, divide outside runtime pm lock (Chris)
References: https://bugs.freedesktop.org/show_bug.cgi?id=94852
Reported-by: Len Brown <len.brown@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Change the granularity from milliseconds to microseconds
when returning rc6 residencies. This is in preparation
for increased resolution on some platforms.
v2: use 64bit div macro (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Plan is to make generic residency calculation utility
function for usage outside of sysfs. As a first step
move residency calculation into intel_pm.c
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
After negative guc fw selection we could leave guc
submission flag still turned on. Reorder some checks
to cover this case. While here, fix info message and
return early if there is no Guc.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
[tursulin: fixup bad alignment]
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315133741.150420-1-michal.wajdeczko@intel.com
This field is used to determine which kind of firmware the struct
describes (GuC/HuC) - the name does not reflect.
The enum used here have "type" in the name, so let's go with that.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315133415.15343-1-arkadiusz.hiler@intel.com
Tvrtko spotted a stale reference to b->lock (now b->rb_lock) so review
the comments and try to improve them in passing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315222259.1469-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Currently ILK-BDW explicitly disable LP1+ watermarks from their
.init_clock_gating() hooks. Unfortunately that hook gets called way too
late since by that time we've already initialized all the watermark
state tracking which then gets out of sync with the hardware state.
We may eventually want to consider killing off the explicit LP1+
disable from .init_clock_gating(). In the meantime however, we can
avoid the problem by reordering the init sequence such that
intel_modeset_init_hw()->intel_init_clock_gating() gets called
prior to the hardware state takeover.
I suppose prior to the two stage watermark programming we were
magically saved by something that forced the watermarks to be
reprogrammed fully after .init_clock_gating() got called. But
now that no longer happens.
Note that the diff might look a bit odd as it kills off one
call of intel_update_cdclk(), but that's fine because
intel_modeset_init_hw() does the exact same thing. Previously
we just did it twice.
Actually even this new init sequence is pretty bogus as
.init_clock_gating() really should be called before any gem
hardware init since it can configure various clock gating
workarounds and whatnot that affect the GT side as well. Also
intel_modeset_init() really should get split up into better
defined init stages. Another "fun" detail is that
intel_modeset_gem_init() is where RPS/RC6 gets configured.
Why that is done from the display code is beyond me. I've
decided to leave all this be for now, and just try to fix
the init sequence enough for watermarks to work.
Cc: stable@vger.kernel.org
Cc: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Cc: David Purton <dcpurton@marshwiggle.net>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Reported-by: David Purton <dcpurton@marshwiggle.net>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96645
Fixes: ed4a6a7ca8 ("drm/i915: Add two-stage ILK-style watermark programming (v11)")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170220140443.30891-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315143158.31780-1-ville.syrjala@linux.intel.com
(cherry picked from commit 5be6e33400)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Check that request has not been signaled before acquiring a reference to
the request for signaling later in the interrupt handler.
The loading of the cacheline (for request->fence.flags) should be "free"
when followed by the locked increment of the request->fence.refcount
(which then sets the cacheline to exclusive mode), i.e. the cost of
test_bit prior to an atomic_inc should be negligible. This should
benefit us when we have a pile of bare breadcrumbs (interrupted execbuf)
where we may get interrupts faster than we can get rid of the
intel_wait, or if the device is too slow to run the bottom-half between
interrupts.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-5-chris@chris-wilson.co.uk
We need to ensure that we always serialize updates to the bottom-half
using the breadcrumbs.irq_lock so that we don't race with a concurrent
interrupt handler. This is most important just prior to leaving the
waiter (when the intel_wait will be overwritten), so make sure we are
not the current bottom-half when skipping the irq locks.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-4-chris@chris-wilson.co.uk
Before walking the rbtree of waiters (marking them as complete and waking
them), decouple the interrupt handler. This prevents a race between the
missed waiter waking up and removing its intel_wait (which skips
checking the lock) and the interrupt handler dereferencing the
intel_wait. (Though we do not expect to encounter waiters during idle!)
Fixes: e1c0c91bda ("drm/i915: Wake up all waiters before idling")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-3-chris@chris-wilson.co.uk
When adding a new request to the breadcrumb rbtree, we mark all those
requests inside the rbtree that are already completed as complete. This
wakes those waiters up and allows them to skip the spinlock before
returning to userspace. If one of those is the current bottom-half and
allocated its intel_wait on the stack, it may then overwrite the
b->irq_wait upon exiting i915_wait_request() just as the interrupt handler
dereferences it.
Fixes: 56299fb7d9 ("drm/i915: Signal first fence from irq handler if complete")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-2-chris@chris-wilson.co.uk
Since commit 9b6586ae9f ("drm/i915: Keep a global seqno per-engine")
converted intel_breadcrumbs_busy() to reporting a single boolean, we
need only compute a boolean internally (and not needlessly compute the
flag).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-1-chris@chris-wilson.co.uk
We take the runtime pm wakelock during i915_handle_error() to ensure
that all paths that reach the error handler keep the device awake during
the hw reads. However, we need to extend that from the reset handler to
include the earlier capture routines.
Reported-by: Antonio Argenziano <antonio.argenziano@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170314171840.25706-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Manual pointer manipulation is error prone. Let compiler calculate
right offsets for us in case we need to change ads layout.
v2: don't call it object (Chris)
v3: restyle offset assignments (Chris)
v4: stylistic reductions
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170314133309.126432-1-michal.wajdeczko@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
`guc_firmware_path` and `huc_firmware_path` module parameters are added.
Using the parameter disables version checks and loads desired firmware
instead of the default one.
v2: make params unsafe && notice about disabled fw check (J. Lahtinen)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
intel_{h,g}uc_init_fw selects correct firmware and then triggers it's
preparation (fetch + initial parsing).
This change separates out select steps, so those can be called by
the sanitize_options().
Then, during the init_fw(), we prepare the firmware if the firmware was
selected.
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Currently fw->path values can represent one of three possible states:
1) NULL - device without the uC
2) '\0' - device with the uC but have no firmware
3) else - device with the uC and we have firmware
Second case is used only to WARN at a later stage.
We can WARN right away and merge cases 1 and 2.
Code can be even further simplified and common (HuC/GuC logic) happening
right before the fetch can be offloaded to the common function.
v2: fewer temporary variables, more straightforward flow (M. Wajdeczko)
v3: DRM_ERROR instead of WARN (M. Wajdeczko)
v4: coding standard (J. Lahtinen)
v5: non-trivial rebase
v6: remove path check, we are checking fetch status (M. Wajdeczko)
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Current version of intel_guc_init_hw() does a lot:
- cares about submission
- loads huc
- implement WA
This change offloads some of the logic to intel_uc_init_hw(), which now
cares about the above.
v2: rename guc_hw_reset and fix typo in define name (M. Wajdeczko)
v3: rename once again
v4: remove spurious comments and add some style (J. Lahtinen)
v5: flow changes, got rid of dead checks (M. Wajdeczko)
v6: rebase
v7: rebase & onion teardown (J. Lahtinen)
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Let intel_guc_init_fw() focus on determining and fetching the correct
firmware.
This patch introduces intel_uc_sanitize_options() that is called from
intel_sanitize_options().
Then, if we have GuC, we can call intel_guc_init_fw() conditionally
and we do not have to do the internal checks.
v2: fix comment, notify when nuking GuC explicitly enabled (M. Wajdeczko)
v3: fix comment again, change the nuke message (M. Wajdeczko)
v4: update title to reflect new function name + rebase
v5: text && remove 2 uneccessary checks (M. Wajdeczko)
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Instead of calling intel_guc_init() and intel_huc_init() one by one this
patch introduces intel_uc_init_fw() function that calls them both.
Called functions are renamed accordingly.
Trying to have subject_verb_object ordering and more descriptive names,
the intel_huc_init() and intel_guc_init() functions are renamed.
For guc_init():
* `intel_guc` is the subject, so those functions now take intel_guc
structure, instead of the dev_priv
* init is the verb
* fw is the object which better describes the function's role
huc_init() change follows the same reasoning.
v2: settle on intel_uc_fetch_fw name (M. Wajdeczko)
v3: yet another rename - intel_uc_init_fw (J. Lahtinen)
v4: non-trivial rebase
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The file fits better.
Additionally rename it to intel_uc_prepare_fw(), as the function does
more than simple fetch.
`obj` cleanup in the function is also fixed (i.e. removed). In the fail
scenario it was always 'put' but there's no possible flow that
initializes the obj properly and then goes to the fail label.
v2: remove second declaration, reorder (M. Wajdeczko)
v3: non-trivial rebase
v4: remove obj cleanup in the fail scenario (C. Wilson)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
GuC historically has two "startup" functions called _init() and _setup()
Then HuC came with it's _init() and _load().
This commit renames intel_guc_setup() and intel_huc_load() to
*uc_init_hw() as they called from the i915_gem_init_hw().
The aim is to be consistent in that entry points called during
particular driver init phases (e.g. init_hw) are all suffixed by that
phase. When reading the leaf functions, it should be clear at what stage
during the driver load it is called and therefore what operations are
legal at that point.
Also, since the functions start with intel_guc and intel_huc they take
appropiate structure.
v2: commit message update (Chris Wilson)
v3: change taken parameters to be more "semantic" (M. Wajdeczko)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Used to obtain "dev_priv" from huc struct pointer.
We already have similar thing for guc.
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Externs are implicit and we generally try to avoid them.
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Check that the sink really declared 12bpc support before we enable it.
This should not actually never happen since it's mandatory for HDMI
sinks to support 12bpc if they support any deep color modes. But
reality disagrees with the theory and there are actually sinks in
the wild that violate the spec.
v2: Fix the output_types check
Update commit message to state that these things are in fact real
Cc: stable@vger.kernel.org
Cc: Nicholas Sielicki <nicholas.sielicki@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99250
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170213175818.24958-1-ville.syrjala@linux.intel.com
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
(cherry picked from commit c750bdd3e7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-----BEGIN PGP SIGNATURE-----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=BSWh
-----END PGP SIGNATURE-----
Merge tag 'doc-4.11-images' of git://git.lwn.net/linux into drm-misc-next
Pointer for Markus's image conversion work.
We need this so we can merge all the pretty drm graphs for 4.12.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
The 33rd entry in the pre-CSC gamma table in Geminilake can represent a
value of 1.0 as 17 bits fixed point with one integer bit. However, the
table was generated such that the value of 1.0 would be 0.ffff with
all the intervals scaled accordingly. For instance, 0.5 mapped to
0.7fff instead of 0.8000.
For a reason that is not clear to the author, the rounding seems to be
different when a cursor plane is used, leading to some seemingly random
failures of the kms_cursor_crc igt tests. The differences weren't
perceptible at 8bpc with images captured by a Chamelium device, but did
cause CRC mismatches.
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170310101835.29845-1-ander.conselvan.de.oliveira@intel.com
There's really not a reason afaics that we can't just clean up
everything at the end, in the terminal postclose hook: Since this is
closing a file descriptor we know no one else can have a reference or
a thread doing something with that drm_file except the close code.
Ordering shouldn't matter, as long as we don't kfree before we clean
stuff up.
In the past this was more relevant when drivers still had to track and
clean up pending drm events, but that's all done by the core now.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-13-daniel.vetter@ffwll.ch
As i915_gem_reset_finish() undoes the steps from
i915_gem_reset_prepare() to leave the system in a fully-working state,
e.g. to be able to free the breadcrumb signal threads, make sure that we
always call it even on the error path.
Fixes: da9a796f54 ("drm/i915: Split GEM resetting into 3 phases")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170212172002.23072-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
(cherry picked from commit 8d613c539c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
