The dependency for the man page rule using asciidoctor incorrectly
specifies a source file in $(OUTPUT). When building out-of-tree, the
source file is not found, resulting in a fall-back to the following rule
which uses xmlto.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180916151704.GF4765@decadent.org.uk
Fixes: ffef80ecf8 ("perf Documentation: Support for asciidoctor")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 1c5aae7710 ("perf machine: Create maps for x86 PTI entry
trampolines") revealed a problem with maps__find_symbol_by_name() that
resulted in probes not being found e.g.
$ sudo perf probe xsk_mmap
xsk_mmap is out of .text, skip it.
Probe point 'xsk_mmap' not found.
Error: Failed to add events.
maps__find_symbol_by_name() can optionally return the map of the found
symbol. It can get the map wrong because, in fact, the symbol is found
on the map's dso, not allowing for the possibility that the dso has more
than one map. Fix by always checking the map contains the symbol.
Reported-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Björn Töpel <bjorn.topel@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 1c5aae7710 ("perf machine: Create maps for x86 PTI entry trampolines")
Link: http://lkml.kernel.org/r/20180907085116.25782-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Starting with binutils 2.28, aarch64 objdump adds comments to the
disassembly output to show the alternative names of a condition code
[1].
It is assumed that commas in objdump comments could occur in other
arches now or in the future, so this fix is arch-independent.
The fix could have been done with arm64 specific jump__parse and
jump__scnprintf functions, but the jump__scnprintf instruction would
have to have its comment character be a literal, since the scnprintf
functions cannot receive a struct arch easily.
This inconvenience also applies to the generic jump__scnprintf, which is
why we add a raw_comment pointer to struct ins_operands, so the __parse
function assigns it to be re-used by its corresponding __scnprintf
function.
Example differences in 'perf annotate --stdio2' output on an aarch64
perf.data file:
BEFORE: → b.cs ffff200008133d1c <unwind_frame+0x18c> // b.hs, dffff7ecc47b
AFTER : ↓ b.cs 18c
BEFORE: → b.cc ffff200008d8d9cc <get_alloc_profile+0x31c> // b.lo, b.ul, dffff727295b
AFTER : ↓ b.cc 31c
The branch target labels 18c and 31c also now appear in the output:
BEFORE: add x26, x29, #0x80
AFTER : 18c: add x26, x29, #0x80
BEFORE: add x21, x21, #0x8
AFTER : 31c: add x21, x21, #0x8
The Fixes: tag below is added so stable branches will get the update; it
doesn't necessarily mean that commit was broken at the time, rather it
didn't withstand the aarch64 objdump update.
Tested no difference in output for sample x86_64, power arch perf.data files.
[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=bb7eff5206e4795ac79c177a80fe9f4630aaf730
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Fixes: b13bbeee5e ("perf annotate: Fix branch instruction with multiple operands")
Link: http://lkml.kernel.org/r/20180827125340.a2f7e291901d17cea05daba4@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This makes sure that the SyS symbols are ignored for any powerpc system,
not just the big endian ones.
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Fixes: fb6d594231 ("perf probe ppc: Use the right prefix when ignoring SyS symbols on ppc")
Link: http://lkml.kernel.org/r/20180828090848.1914-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some implementations of libc do not support the 'm' width modifier as
part of the scanf string format specifier. This can cause the parsing to
fail. Since the parser never checks if the scanf parsing was
successesful, this can result in a crash.
Change the comm string to be allocated as a fixed size instead of
dynamically using 'm' scanf width modifier. This can be safely done
since comm size is limited to 16 bytes by TASK_COMM_LEN within the
kernel.
This change prevents perf from crashing when linked against bionic as
well as reduces the total number of heap allocations and frees invoked
while accomplishing the same task.
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180830021950.15563-1-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the write to the output_fd in the error condition of
record_saved_cmdline(), we are writing 8 bytes from a memory location on
the stack that contains a primitive that is only 4 bytes in size.
Change the primitive to 8 bytes in size to match the size of the write
in order to avoid reading unknown memory from the stack.
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180829061954.18871-1-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were emitting 4 lines, two of them misleading:
make: Entering directory '/home/acme/git/perf/tools/perf'
<SNIP>
INSTALL lib
INSTALL include/bpf
INSTALL lib
INSTALL examples/bpf
<SNIP>
make: Leaving directory '/home/acme/git/perf/tools/perf'
Make it more compact by showing just two lines:
make: Entering directory '/home/acme/git/perf/tools/perf'
INSTALL bpf-headers
INSTALL bpf-examples
make: Leaving directory '/home/acme/git/perf/tools/perf'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-0nvkyciqdkrgy829lony5925@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If evsel is NULL, we should return NULL to avoid a NULL pointer
dereference a bit later in the code.
Signed-off-by: Hisao Tanabe <xtanabe@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 03e0a7df3e ("perf tools: Introduce bpf-output event")
LPU-Reference: 20180824154556.23428-1-xtanabe@gmail.com
Link: https://lkml.kernel.org/n/tip-e5plzjhx6595a5yjaf22jss3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new syscall table support for arm64 mistakenly used the system's
asm-generic/unistd.h file when processing the
tools/arch/arm64/include/uapi/asm/unistd.h file's include directive:
#include <asm-generic/unistd.h>
See "Committer notes" section of commit 2b58824356 "perf arm64:
Generate system call table from asm/unistd.h" for more details.
This patch removes the committer's temporary workaround, and instructs
the host compiler to search the build tree's include path for the right
copy of the unistd.h file, instead of the one on the system's
/usr/include path.
It thus fixes the committer's test that cross-builds an arm64 perf on an
x86 platform running Ubuntu 14.04.5 LTS with an old toolchain:
$ tools/perf/arch/arm64/entry/syscalls/mksyscalltbl /gcc-linaro-5.4.1-2017.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc gcc `pwd`/tools tools/arch/arm64/include/uapi/asm/unistd.h | grep bpf
[280] = "bpf",
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Fixes: 2b58824356 ("perf arm64: Generate system call table from asm/unistd.h")
Link: http://lkml.kernel.org/r/20180806172800.bbcec3cfcc51e2facc978bf2@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding to tests that aims on kernel breakpoint modification bugs.
First test creates HW breakpoint, tries to change it and checks it was
properly changed. It aims on kernel issue that prevents HW breakpoint to
be changed via ptrace interface.
The first test forks, the child sets itself as ptrace tracee and waits
in signal for parent to trace it, then it calls bp_1 and quits.
The parent does following steps:
- creates a new breakpoint (id 0) for bp_2 function
- changes that breakpoint to bp_1 function
- waits for the breakpoint to hit and checks
it has proper rip of bp_1 function
This test aims on an issue in kernel preventing to change disabled
breakpoints
Second test mimics the first one except for few steps
in the parent:
- creates a new breakpoint (id 0) for bp_1 function
- changes that breakpoint to bogus (-1) address
- waits for the breakpoint to hit and checks
it has proper rip of bp_1 function
This test aims on an issue in kernel disabling enabled
breakpoint after unsuccesful change.
Committer testing:
# uname -a
Linux jouet 4.18.0-rc8-00002-g1236568ee3cb #12 SMP Tue Aug 7 14:08:26 -03 2018 x86_64 x86_64 x86_64 GNU/Linux
# perf test -v "bp modify"
62: x86 bp modify :
--- start ---
test child forked, pid 25671
in bp_1
tracee exited prematurely 2
FAILED arch/x86/tests/bp-modify.c:209 modify test 1 failed
test child finished with -1
---- end ----
x86 bp modify: FAILED!
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Milind Chabbi <chabbi.milind@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180827091228.2878-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jaroslav reported errors from valgrind over perf python script:
# echo 0 > /sys/devices/system/cpu/cpu4/online
# valgrind ./test.py
==7524== Memcheck, a memory error detector
...
==7524== Command: ./test.py
==7524==
pid 7526 exited
==7524== Invalid read of size 8
==7524== at 0xCC2C2B3: perf_mmap__read_forward (evlist.c:780)
==7524== by 0xCC2A681: pyrf_evlist__read_on_cpu (python.c:959)
...
==7524== Address 0x65c4868 is 16 bytes after a block of size 459,36..
==7524== at 0x4C2B955: calloc (vg_replace_malloc.c:711)
==7524== by 0xCC2F484: zalloc (util.h:35)
==7524== by 0xCC2F484: perf_evlist__alloc_mmap (evlist.c:978)
...
The reason for this is in the python interface, that allows a script to
pass arbitrary cpu number, which is then used to access struct
perf_evlist::mmap array. That's obviously wrong and works only when if
all cpus are available and fails if some cpu is missing, like in the
example above.
This patch makes pyrf_evlist__read_on_cpu() search the evlist's maps
array for the proper map to access.
It's linear search at the moment. Based on the way how is the
read_on_cpu used, I don't think we need to be fast in here. But we
could add some hash in the middle to make it fast/er.
We don't allow python interface to set write_backward event attribute,
so it's safe to check only evlist's mmaps.
Reported-by: Jaroslav Škarvada <jskarvad@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817114556.28000-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Store the real cpu number in 'struct perf_mmap', which will be used by
python interface that allows user to read a particular memory map for
given cpu.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jaroslav Škarvada <jskarvad@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817114556.28000-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Having comp carrying the compression ID, we no longer need return the
extension. Removing it and updating the automated test.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add implementation of the is_compressed callback for gzip.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add implementation of the is_compressed callback for lzma.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add is_compressed callback to the compressions array, that returns 0 if
the file is compressed or != 0 if not.
The new callback is used to recognize the situation when we have a
'compressed' object, like:
/lib/modules/.../drivers/net/ethernet/intel/igb/igb.ko.xz
but we need to read its debug data from debuginfo files, which might not
be compressed, like:
/root/.debug/.build-id/d6/...c4b301f/debug
So even for a 'compressed' object we read debug data from a plain
uncompressed object. To keep this transparent, we detect this in
decompress_kmodule() and return the file descriptor to the uncompressed
file.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will add a compression check in the following patch and it makes it
easier if the file processing is done in a single place. It also makes
the current code simpler.
The decompress_kmodule function now returns the fd of the uncompressed
file and the file name in the pathname arg, if it's provided.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Once we parsed out the compression ID, we dont need to iterate all
available compressions and we can call it directly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add comp to 'struct dso' to hold the compression index. It will be used
in the following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Store a decompression ID in 'struct kmod_path', so it can be later
stored in 'struct dso'.
Switch 'struct kmod_path's 'comp' from 'bool' to 'int' to return the
compressions array index. Add 0 index item into compressions array, so
that the comp usage stays as it was: 0 - no compression, != 0
compression index.
Update the kmod_path tests.
Committer notes:
Use a designated initializer + terminating comma, e.g. { .fmt = NULL, }, to fix
the build in several distros:
centos:6: util/dso.c:201: error: missing initializer
centos:6: util/dso.c:201: error: (near initialization for 'compressions[0].decompress')
debian:9: util/dso.c:201:24: error: missing field 'decompress' initializer [-Werror,-Wmissing-field-initializers]
fedora:25: util/dso.c:201:24: error: missing field 'decompress' initializer [-Werror,-Wmissing-field-initializers]
fedora:26: util/dso.c:201:24: error: missing field 'decompress' initializer [-Werror,-Wmissing-field-initializers]
fedora:27: util/dso.c:201:24: error: missing field 'decompress' initializer [-Werror,-Wmissing-field-initializers]
oraclelinux:6: util/dso.c:201: error: missing initializer
oraclelinux:6: util/dso.c:201: error: (near initialization for 'compressions[0].decompress')
ubuntu:12.04.5: util/dso.c:201:2: error: missing initializer [-Werror=missing-field-initializers]
ubuntu:12.04.5: util/dso.c:201:2: error: (near initialization for 'compressions[0].decompress') [-Werror=missing-field-initializers]
ubuntu:16.04: util/dso.c:201:24: error: missing field 'decompress' initializer [-Werror,-Wmissing-field-initializers]
ubuntu:16.10: util/dso.c:201:24: error: missing field 'decompress' initializer [-Werror,-Wmissing-field-initializers]
ubuntu:16.10: util/dso.c:201:24: error: missing field 'decompress' initializer [-Werror,-Wmissing-field-initializers]
ubuntu:17.10: util/dso.c:201:24: error: missing field 'decompress' initializer [-Werror,-Wmissing-field-initializers]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no outside user of it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no outside user of it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to call dso__needs_decompress() twice in the function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to call dso__needs_decompress() twice in the function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need to call dso__needs_decompress() twice in the function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180817094813.15086-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is the second version of a patch that improves the error message of
the perf events parser when the PMU hardware does not support address
filters.
Previously, the perf returned the following error:
$ perf record -e intel_pt// --filter 'filter sys_write'
--filter option should follow a -e tracepoint or HW tracer option
This implies there is some syntax error present in the command line,
which is not true. Rather, notify the user that the CPU does not have
support for this feature.
For example, Intel chips based on the Broadwell micro-archticture have
the Intel PT PMU, but do not support address filtering.
Now, perf prints the following error message:
$ perf record -e intel_pt// --filter 'filter sys_write'
This CPU does not support address filtering
Signed-off-by: Jack Henschel <jackdev@mailbox.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180704121345.19025-1-jackdev@mailbox.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Yocto build system does a 'make clean' when rebuilding due to
changed dependencies, and that consistently fails for me (causing the
whole BSP build to fail) with errors such as
| find: '[...]/perf/1.0-r9/perf-1.0/plugin_mac80211.so': No such file or directory
| find: '[...]/perf/1.0-r9/perf-1.0/plugin_mac80211.so': No such file or directory
| find: find: '[...]/perf/1.0-r9/perf-1.0/libtraceevent.a''[...]/perf/1.0-r9/perf-1.0/libtraceevent.a': No such file or directory: No such file or directory
|
[...]
| find: cannot delete '/mnt/xfs/devel/pil/yocto/tmp-glibc/work/wandboard-oe-linux-gnueabi/perf/1.0-r9/perf-1.0/util/.pstack.o.cmd': No such file or directory
Apparently (despite the comment), 'make clean' ends up launching
multiple sub-makes that all want to remove the same things - perhaps
this only happens in combination with a O=... parameter. In any case, we
don't lose much by explicitly disabling the parallelism for the clean
target, and it makes automated builds much more reliable.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180705131527.19749-1-linux@rasmusvillemoes.dk
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the number of queues grows beyond 32, the array of queues is
resized but not all members were being copied. Fix by also copying
'tid', 'cpu' and 'set'.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: e502789302 ("perf auxtrace: Add helpers for queuing AUX area tracing data")
Link: http://lkml.kernel.org/r/20180814084608.6563-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These options are not present in older clang versions, so when we build
for a distro that has a gcc new enough to have these options and that
the distro python build config settings use them but clang doesn't
support, b00m.
This is the case with fedora 28 and rawhide, so check if clang has the
options and remove the missing ones from CFLAGS.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-7asds7yn6gzg6ns1lw17ukul@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The auxtrace init variable 'err' was not being initialized, leading perf
to abort early in an SPE record command when there was no explicit
error, rather only based whatever memory contents were on the stack.
Initialize it explicitly on getting an SPE successfully, the same way
cs-etm does.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dongjiu Geng <gengdongjiu@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: ffd3d18c20 ("perf tools: Add ARM Statistical Profiling Extensions (SPE) support")
Link: http://lkml.kernel.org/r/20180810174512.52900813e57cbccf18ce99a2@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Probably leftover from the time we introducd the check-headers.sh script.
Committer testing:
Remove the 'rseq' syscall from tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
to fake a diff:
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
CC /tmp/build/perf/util/syscalltbl.o
INSTALL trace_plugins
<SNIP>
$ diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
--- tools/perf/arch/x86/entry/syscalls/syscall_64.tbl 2018-08-13 15:49:50.896585176 -0300
+++ arch/x86/entry/syscalls/syscall_64.tbl 2018-07-20 12:04:04.536858304 -0300
@@ -342,6 +342,7 @@
331 common pkey_free __x64_sys_pkey_free
332 common statx __x64_sys_statx
333 common io_pgetevents __x64_sys_io_pgetevents
+334 common rseq __x64_sys_rseq
#
# x32-specific system call numbers start at 512 to avoid cache impact
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180813111504.3568-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changing the logic to compare files with paths relative to kernel source
base dir. This way we can keep the output message for 2 unrelated files,
which is coming in following patch.
Committer testing:
Remove a line from tools/arch/x86/lib/memcpy_64.S to have it detected:
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
INSTALL GTK UI
INSTALL binaries
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180813111504.3568-1-jolsa@kernel.org
Link: http://lkml.kernel.org/r/20180814072726.GA13931@krava
[ Do not use pushd/popd, its a bashism, reported by Michael Ellerman, fixed by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The '||' path of execution in the 'test' block of the check_2() function
may also be taken if file2 does not exist, in which case the warning
message about the ABI headers being different would still be printed
where it should not be. See below.
% file1=file1; file2=file2
% cmd="echo diff $file1 $file2"
% test -f $file2 && \
eval $cmd || echo "Warning: Kernel ABI header at 'tools/$file1'
differs from latest version at '$file2'" >&2
Warning: Kernel ABI header at 'tools/file1' differs from latest
version at 'file2'
The proposed patch converts the code following the '&&' operator into a
compound list to be executed in the current process environment only if file2
does exist. Should the files being compared differ, a diff command to compare
the files concerned is printed on standard output. E.g.
$ diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
Committer testing:
Remove a line from that tools/arch/x86/lib/memcpy_64.S file to test
this:
BUILD: Doing 'make -j4' parallel build
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180811083915.17471-1-alexander.kapshuk@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The argument to nsinfo__copy() was assumed to be valid, but some code paths
exist that will lead to NULL being passed.
In particular, running 'perf script -D' on a perf.data file containing an
PERF_RECORD_MMAP event associating the '[vdso]' dso with pid 0 earlier in
the event stream will lead to a segfault.
Since all calling code is already checking for a non-null return value,
just return NULL for this case as well.
Signed-off-by: Benno Evers <bevers@mesosphere.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180810133614.9925-1-bevers@mesosphere.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
pevent_get_page_size API and enum pevent_flag to enum tep_flag
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180701.623942406@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "traceevent_". This
changes APIs: traceevent_host_bigendian, traceevent_load_plugins and
traceevent_unload_plugins
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180701.484691639@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_set_file_bigendian, pevent_set_flag,
pevent_set_function_resolver, pevent_set_host_bigendian,
pevent_set_long_size, pevent_set_page_size and pevent_get_long_size
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180701.256265951@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_register_comm, pevent_register_print_string
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.948980691@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_read_number, pevent_read_number_field
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.804271434@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_print_field, pevent_print_fields, pevent_print_funcs,
pevent_print_printk
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.654453763@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_parse_event, pevent_parse_format, pevent_parse_header_page
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.469749700@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_find_any_field, pevent_find_common_field,
pevent_find_event, pevent_find_field
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.316995920@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_alloc, pevent_free, pevent_event_info and pevent_func_resolver_t
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.152609945@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
the 'struct pevent_record' to 'struct tep_record'.
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180659.866021298@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
the struct pevent to struct tep_handle.
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180659.706175783@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In some cases, a symbol may have multiple aliases. Attempting to add an
entry probe for such symbols results in a probe being added at an
incorrect location while it fails altogether for return probes. This is
only applicable for binaries with debug information.
During the arch-dependent post-processing, the offset from the start of
the symbol at which the probe is to be attached is determined and added
to the start address of the symbol to get the probe's location. In case
there are multiple aliases, this offset gets added multiple times for
each alias of the symbol and we end up with an incorrect probe location.
This can be verified on a powerpc64le system as shown below.
$ nm /lib/modules/$(uname -r)/build/vmlinux | grep "sys_open$"
...
c000000000414290 T __se_sys_open
c000000000414290 T sys_open
$ objdump -d /lib/modules/$(uname -r)/build/vmlinux | grep -A 10 "<__se_sys_open>:"
c000000000414290 <__se_sys_open>:
c000000000414290: 19 01 4c 3c addis r2,r12,281
c000000000414294: 70 c4 42 38 addi r2,r2,-15248
c000000000414298: a6 02 08 7c mflr r0
c00000000041429c: e8 ff a1 fb std r29,-24(r1)
c0000000004142a0: f0 ff c1 fb std r30,-16(r1)
c0000000004142a4: f8 ff e1 fb std r31,-8(r1)
c0000000004142a8: 10 00 01 f8 std r0,16(r1)
c0000000004142ac: c1 ff 21 f8 stdu r1,-64(r1)
c0000000004142b0: 78 23 9f 7c mr r31,r4
c0000000004142b4: 78 1b 7e 7c mr r30,r3
For both the entry probe and the return probe, the probe location
should be _text+4276888 (0xc000000000414298). Since another alias
exists for 'sys_open', the post-processing code will end up adding
the offset (8 for powerpc64le) twice and perf will attempt to add
the probe at _text+4276896 (0xc0000000004142a0) instead.
Before:
# perf probe -v -a sys_open
probe-definition(0): sys_open
symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Writing event: p:probe/sys_open _text+4276896
Added new event:
probe:sys_open (on sys_open)
...
# perf probe -v -a sys_open%return $retval
probe-definition(0): sys_open%return
symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/README write=0
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Parsing probe_events: p:probe/sys_open _text+4276896
Group:probe Event:sys_open probe:p
Writing event: r:probe/sys_open__return _text+4276896
Failed to write event: Invalid argument
Error: Failed to add events. Reason: Invalid argument (Code: -22)
After:
# perf probe -v -a sys_open
probe-definition(0): sys_open
symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Writing event: p:probe/sys_open _text+4276888
Added new event:
probe:sys_open (on sys_open)
...
# perf probe -v -a sys_open%return $retval
probe-definition(0): sys_open%return
symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/README write=0
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Parsing probe_events: p:probe/sys_open _text+4276888
Group:probe Event:sys_open probe:p
Writing event: r:probe/sys_open__return _text+4276888
Added new event:
probe:sys_open__return (on sys_open%return)
...
Reported-by: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Fixes: 99e608b595 ("perf probe ppc64le: Fix probe location when using DWARF")
Link: http://lkml.kernel.org/r/20180809161929.35058-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This function splits and removes overlapping areas.
Maps in tree are ordered by start address thus we could find first
overlap and stop if next map does not overlap.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/153365189407.435244.7234821822450484712.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Threads share map_groups, all map events are merged into it.
Thus we could send mmaps only for thread group leader. Otherwise it
took ages to attach and record something from processes with many vmas
and threads.
Thread group leader could be already dead, but it seems perf cannot
handle this case anyway.
Testing dummy:
#include <stdio.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <pthread.h>
#include <unistd.h>
void *thread(void *arg) {
pause();
}
int main(int argc, char **argv) {
int threads = 10000;
int vmas = 50000;
pthread_t th;
for (int i = 0; i < threads; i++)
pthread_create(&th, NULL, thread, NULL);
for (int i = 0; i < vmas; i++)
mmap(NULL, 4096, (i & 1) ? PROT_READ : PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_NORESERVE, -1, 0);
sleep(60);
return 0;
}
Comment by Jiri Olsa:
We actualy synthesize the group leader (if we found one) for the thread
even if it's not present in the thread_map, so the process maps are
always in data.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/153363294102.396323.6277944760215058174.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
