Three low-level functions in hdmi4.c and hdmi4_core.c are
made available for use by the OMAP4 CEC support.
Renamed the prefix to hdmi4 since these are OMAP4 specific.
These function deal with the HDMI core and are needed to
power it up for use with CEC, even when the HPD is low.
Background: even if the HPD is low it should still be possible
to use CEC. Some displays will set the HPD low when they go into standby or
when they switch to another input, but CEC is still available and able
to wake up/change input for such a display.
This is explicitly allowed by the CEC standard.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Extend the hdmi_core_data struct with the additional fields needed
for CEC.
Also fix a simple typo in a comment.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
For OMAP4 CEC support the CEC pin should always be on. So keep
ls_oe_gpio high all the time in order to support CEC.
Background: even if the HPD is low it should still be possible
to use CEC. Some displays will set the HPD low when they go into standby or
when they switch to another input, but CEC is still available and able
to wake up/change input for such a display.
This is explicitly allowed by the CEC standard.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
- lib/scatterlist updates, use for userptr allocations (Tvrtko)
- Fixed point wrapper cleanup (Mahesh)
- Gen9+ transition watermarks, watermark optimization and fixes (Mahesh)
- Display IPC (Isochronous Priority Control) support (Mahesh)
- GEM workaround fixes (Oscar)
- GVT: PCI config sanitize series (Changbin)
- GVT: Workload submission error handling series (Fred)
- PSR fixes and refactoring (Rodrigo)
- HWSP based optimizations (Chris)
- Private PAT management (Zhi)
- IRQ handling fixes and refactoring (Ville)
- Module parameter refactoring and variable name clash fix (Michal)
- Execlist refactoring, incomplete request unwinding on reset (Chris)
- GuC scheduling improvements (Michal)
- OA updates (Lionel)
- Coffeelake out of alpha support (Rodrigo)
- seqno fixes (Chris)
- Execlist refactoring (Mika)
- DP and DP MST cleanups (Dhinakaran)
- Cannonlake slice/sublice config (Ben)
- Numerous fixes all around (Everyone)
-----BEGIN PGP SIGNATURE-----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=qpkh
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2017-09-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
2nd batch of v4.15 features:
- lib/scatterlist updates, use for userptr allocations (Tvrtko)
- Fixed point wrapper cleanup (Mahesh)
- Gen9+ transition watermarks, watermark optimization and fixes (Mahesh)
- Display IPC (Isochronous Priority Control) support (Mahesh)
- GEM workaround fixes (Oscar)
- GVT: PCI config sanitize series (Changbin)
- GVT: Workload submission error handling series (Fred)
- PSR fixes and refactoring (Rodrigo)
- HWSP based optimizations (Chris)
- Private PAT management (Zhi)
- IRQ handling fixes and refactoring (Ville)
- Module parameter refactoring and variable name clash fix (Michal)
- Execlist refactoring, incomplete request unwinding on reset (Chris)
- GuC scheduling improvements (Michal)
- OA updates (Lionel)
- Coffeelake out of alpha support (Rodrigo)
- seqno fixes (Chris)
- Execlist refactoring (Mika)
- DP and DP MST cleanups (Dhinakaran)
- Cannonlake slice/sublice config (Ben)
- Numerous fixes all around (Everyone)
* tag 'drm-intel-next-2017-09-29' of git://anongit.freedesktop.org/drm/drm-intel: (168 commits)
drm/i915: Update DRIVER_DATE to 20170929
drm/i915: Use memset64() to prefill the GTT page
drm/i915: Also discard second CRC on gen8+ platforms.
drm/i915/psr: Set frames before SU entry for psr2
drm/dp: Add defines for latency in sink
drm/i915: Allow optimized platform checks
drm/i915: Avoid using dev_priv->info.gen directly.
i915: Use %pS printk format for direct addresses
drm/i915/execlists: Notify context-out for lost requests
drm/i915/cnl: Add support slice/subslice/eu configs
drm/i915: Compact device info access by a small re-ordering
drm/i915: Add IS_PLATFORM macro
drm/i915/selftests: Try to recover from a wedged GPU during reset tests
drm/i915/huc: Reorganize HuC authentication
drm/i915: Fix default values of some modparams
drm/i915: Extend I915_PARAMS_FOR_EACH with default member value
drm/i915: Make I915_PARAMS_FOR_EACH macro more flexible
drm/i915: Enable scanline read based on frame timestamps
drm/i915/execlists: Microoptimise execlists_cancel_port_request()
drm/i915: Don't rmw PIPESTAT enable bits
...
This will allow __drm_mode_object_file to be extended to perform
access control checks based on the file in use.
v2: Also fix up vboxvideo driver in staging
[airlied: merging early as this is an API change]
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Turn intel_dp_source_supports_hbr2() into a simple helper to query the
pre-filled source rates array, and move the conditions about which
platforms support which rates to the single point of truth in
intel_dp_set_source_rates().
This also reduces the code paths you have to think about in the source
rates initialization in intel_dp_set_source_rates(), making it easier to
grasp.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009092959.29021-2-jani.nikula@intel.com
With intel_encoder_current_mode() using the normal state readout code it
actually works on PCH platforms as well. So let's nuke the PCH check from
intel_lvds_init(). I suppose there aren't any machines that actually
need this, but at least we get to eliminate a few lines of code, and one
FIXME.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009161951.22420-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reuse the normal state readout code to get the fixed mode for LVDS/DVO
encoders. This removes some partially duplicated state readout code
from LVDS/DVO encoders. The duplicated code wasn't actually even
populating the negative h/vsync flags, leading to possible state checker
complaints. The normal readout code populates that stuff fully.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009161951.22420-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
stop_machine is not really a locking primitive we should use, except
when the hw folks tell us the hw is broken and that's the only way to
work around it.
This patch tries to address the locking abuse of stop_machine() from
commit 20e4933c47
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Nov 22 14:41:21 2016 +0000
drm/i915: Stop the machine as we install the wedged submit_request handler
Chris said parts of the reasons for going with stop_machine() was that
it's no overhead for the fast-path. But these callbacks use irqsave
spinlocks and do a bunch of MMIO, and rcu_read_lock is _real_ fast.
To stay as close as possible to the stop_machine semantics we first
update all the submit function pointers to the nop handler, then call
synchronize_rcu() to make sure no new requests can be submitted. This
should give us exactly the huge barrier we want.
I pondered whether we should annotate engine->submit_request as __rcu
and use rcu_assign_pointer and rcu_dereference on it. But the reason
behind those is to make sure the compiler/cpu barriers are there for
when you have an actual data structure you point at, to make sure all
the writes are seen correctly on the read side. But we just have a
function pointer, and .text isn't changed, so no need for these
barriers and hence no need for annotations.
Unfortunately there's a complication with the call to
intel_engine_init_global_seqno:
- Without stop_machine we must hold the corresponding spinlock.
- Without stop_machine we must ensure that all requests are marked as
having failed with dma_fence_set_error() before we call it. That
means we need to split the nop request submission into two phases,
both synchronized with rcu:
1. Only stop submitting the requests to hw and mark them as failed.
2. After all pending requests in the scheduler/ring are suitably
marked up as failed and we can force complete them all, also force
complete by calling intel_engine_init_global_seqno().
This should fix the followwing lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
4.14.0-rc3-CI-CI_DRM_3179+ #1 Tainted: G U
------------------------------------------------------
kworker/3:4/562 is trying to acquire lock:
(cpu_hotplug_lock.rw_sem){++++}, at: [<ffffffff8113d4bc>] stop_machine+0x1c/0x40
but task is already holding lock:
(&dev->struct_mutex){+.+.}, at: [<ffffffffa0136588>] i915_reset_device+0x1e8/0x260 [i915]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #6 (&dev->struct_mutex){+.+.}:
__lock_acquire+0x1420/0x15e0
lock_acquire+0xb0/0x200
__mutex_lock+0x86/0x9b0
mutex_lock_interruptible_nested+0x1b/0x20
i915_mutex_lock_interruptible+0x51/0x130 [i915]
i915_gem_fault+0x209/0x650 [i915]
__do_fault+0x1e/0x80
__handle_mm_fault+0xa08/0xed0
handle_mm_fault+0x156/0x300
__do_page_fault+0x2c5/0x570
do_page_fault+0x28/0x250
page_fault+0x22/0x30
-> #5 (&mm->mmap_sem){++++}:
__lock_acquire+0x1420/0x15e0
lock_acquire+0xb0/0x200
__might_fault+0x68/0x90
_copy_to_user+0x23/0x70
filldir+0xa5/0x120
dcache_readdir+0xf9/0x170
iterate_dir+0x69/0x1a0
SyS_getdents+0xa5/0x140
entry_SYSCALL_64_fastpath+0x1c/0xb1
-> #4 (&sb->s_type->i_mutex_key#5){++++}:
down_write+0x3b/0x70
handle_create+0xcb/0x1e0
devtmpfsd+0x139/0x180
kthread+0x152/0x190
ret_from_fork+0x27/0x40
-> #3 ((complete)&req.done){+.+.}:
__lock_acquire+0x1420/0x15e0
lock_acquire+0xb0/0x200
wait_for_common+0x58/0x210
wait_for_completion+0x1d/0x20
devtmpfs_create_node+0x13d/0x160
device_add+0x5eb/0x620
device_create_groups_vargs+0xe0/0xf0
device_create+0x3a/0x40
msr_device_create+0x2b/0x40
cpuhp_invoke_callback+0xc9/0xbf0
cpuhp_thread_fun+0x17b/0x240
smpboot_thread_fn+0x18a/0x280
kthread+0x152/0x190
ret_from_fork+0x27/0x40
-> #2 (cpuhp_state-up){+.+.}:
__lock_acquire+0x1420/0x15e0
lock_acquire+0xb0/0x200
cpuhp_issue_call+0x133/0x1c0
__cpuhp_setup_state_cpuslocked+0x139/0x2a0
__cpuhp_setup_state+0x46/0x60
page_writeback_init+0x43/0x67
pagecache_init+0x3d/0x42
start_kernel+0x3a8/0x3fc
x86_64_start_reservations+0x2a/0x2c
x86_64_start_kernel+0x6d/0x70
verify_cpu+0x0/0xfb
-> #1 (cpuhp_state_mutex){+.+.}:
__lock_acquire+0x1420/0x15e0
lock_acquire+0xb0/0x200
__mutex_lock+0x86/0x9b0
mutex_lock_nested+0x1b/0x20
__cpuhp_setup_state_cpuslocked+0x53/0x2a0
__cpuhp_setup_state+0x46/0x60
page_alloc_init+0x28/0x30
start_kernel+0x145/0x3fc
x86_64_start_reservations+0x2a/0x2c
x86_64_start_kernel+0x6d/0x70
verify_cpu+0x0/0xfb
-> #0 (cpu_hotplug_lock.rw_sem){++++}:
check_prev_add+0x430/0x840
__lock_acquire+0x1420/0x15e0
lock_acquire+0xb0/0x200
cpus_read_lock+0x3d/0xb0
stop_machine+0x1c/0x40
i915_gem_set_wedged+0x1a/0x20 [i915]
i915_reset+0xb9/0x230 [i915]
i915_reset_device+0x1f6/0x260 [i915]
i915_handle_error+0x2d8/0x430 [i915]
hangcheck_declare_hang+0xd3/0xf0 [i915]
i915_hangcheck_elapsed+0x262/0x2d0 [i915]
process_one_work+0x233/0x660
worker_thread+0x4e/0x3b0
kthread+0x152/0x190
ret_from_fork+0x27/0x40
other info that might help us debug this:
Chain exists of:
cpu_hotplug_lock.rw_sem --> &mm->mmap_sem --> &dev->struct_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&dev->struct_mutex);
lock(&mm->mmap_sem);
lock(&dev->struct_mutex);
lock(cpu_hotplug_lock.rw_sem);
*** DEADLOCK ***
3 locks held by kworker/3:4/562:
#0: ("events_long"){+.+.}, at: [<ffffffff8109c64a>] process_one_work+0x1aa/0x660
#1: ((&(&i915->gpu_error.hangcheck_work)->work)){+.+.}, at: [<ffffffff8109c64a>] process_one_work+0x1aa/0x660
#2: (&dev->struct_mutex){+.+.}, at: [<ffffffffa0136588>] i915_reset_device+0x1e8/0x260 [i915]
stack backtrace:
CPU: 3 PID: 562 Comm: kworker/3:4 Tainted: G U 4.14.0-rc3-CI-CI_DRM_3179+ #1
Hardware name: /NUC7i5BNB, BIOS BNKBL357.86A.0048.2017.0704.1415 07/04/2017
Workqueue: events_long i915_hangcheck_elapsed [i915]
Call Trace:
dump_stack+0x68/0x9f
print_circular_bug+0x235/0x3c0
? lockdep_init_map_crosslock+0x20/0x20
check_prev_add+0x430/0x840
? irq_work_queue+0x86/0xe0
? wake_up_klogd+0x53/0x70
__lock_acquire+0x1420/0x15e0
? __lock_acquire+0x1420/0x15e0
? lockdep_init_map_crosslock+0x20/0x20
lock_acquire+0xb0/0x200
? stop_machine+0x1c/0x40
? i915_gem_object_truncate+0x50/0x50 [i915]
cpus_read_lock+0x3d/0xb0
? stop_machine+0x1c/0x40
stop_machine+0x1c/0x40
i915_gem_set_wedged+0x1a/0x20 [i915]
i915_reset+0xb9/0x230 [i915]
i915_reset_device+0x1f6/0x260 [i915]
? gen8_gt_irq_ack+0x170/0x170 [i915]
? work_on_cpu_safe+0x60/0x60
i915_handle_error+0x2d8/0x430 [i915]
? vsnprintf+0xd1/0x4b0
? scnprintf+0x3a/0x70
hangcheck_declare_hang+0xd3/0xf0 [i915]
? intel_runtime_pm_put+0x56/0xa0 [i915]
i915_hangcheck_elapsed+0x262/0x2d0 [i915]
process_one_work+0x233/0x660
worker_thread+0x4e/0x3b0
kthread+0x152/0x190
? process_one_work+0x660/0x660
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x27/0x40
Setting dangerous option reset - tainting kernel
i915 0000:00:02.0: Resetting chip after gpu hang
Setting dangerous option reset - tainting kernel
i915 0000:00:02.0: Resetting chip after gpu hang
v2: Have 1 global synchronize_rcu() barrier across all engines, and
improve commit message.
v3: We need to protect the seqno update with the timeline spinlock (in
set_wedged) to avoid racing with other updates of the seqno, like we
already do in nop_submit_request (Chris).
v4: Use two-phase sequence to plug the race Chris spotted where we can
complete requests before they're marked up with -EIO.
v5: Review from Chris:
- simplify nop_submit_request.
- Add comment to rcu_read_lock section.
- Align comments with the new style.
v6: Remove unused variable to appease CI.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102886
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103096
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171011091019.1425-1-daniel.vetter@ffwll.ch
Falling back to the lowest value is likely the only thing we can do, but
doing it silently seems like a bad thing to do. Catch it early and make
loud noises.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009092959.29021-1-jani.nikula@intel.com
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlnUvBgTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0AuJB/4u17LCa8PBI7pz0LVr7zwj3AEBZrAb
zq/wqlrqZOhyLEfHtLI/So5LyIFYaF7MZJfylHBp6OiDIXEXzee3qLOc5mQB2jnv
BSnH2Ors658o5TCDm1W0xtHXkujAr7MlaV7Wkaw4lLiq3OeNo8lYMdLVW4tLXf0d
ib7hOsO6idt1H8DRYXlrVrGA7Fz8/m2YYahceAOyLAgLxlepoZGJ1xJxMfqr+ZVs
c85y2JoGWFr0Ac/8E/TZUIuONF4forpaWwI1+/0zCfdNLmG9ceAFxiPPIluAGkeO
EyZzahspaFHa0j+/WrOUlB6YcXPY69pUo89kzHYn7ugBrmGoAMtnLnsN
=BA1X
-----END PGP SIGNATURE-----
Merge tag 'regmap-poll-field' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into drm-misc-next
regmap: Add field polling macro
Requested by Maxime Ripard to make sun4i compile again (next time
the other way round is better).
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004104732.jkps4ufekfizcrkz@sirena.co.uk
pipe is an unsigned int and less than zero comparison for unsigned
values is always false.
Detected using the following cocci script:
@@
unsigned int i;
@@
* i < 0
Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010184207.iv3dinrtwvbv7fei@aishwarya
MHL specification defines Remote Control Protocol(RCP) to
send input events between MHL devices.
The driver now recognizes RCP messages and reacts to them
by reporting key events to input subsystem, allowing
a user to control a device using TV remote control.
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Acked-by: Sean Young <sean@mess.org>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1503565087-19730-1-git-send-email-m.purski@samsung.com
Defined new struct intel_rc6 to hold RC6 specific state and
intel_ring_pstate to hold ring specific state.
v2: s/intel_ring_pstate/intel_llc_pstate. Removed checks from
autoenable_* functions. (Chris)
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-13-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-12-chris@chris-wilson.co.uk
Prepared generic functions intel_enable_rc6, intel_disable_rc6,
intel_enable_rps and intel_disable_rps functions to setup RC6/RPS
based on platforms.
v2: Make intel_enable/disable_rc6/rps static. (Chris)
v3: Added lockdep_assert_held(dev_priv->pcu_lock) in new generic
functions. (Chris)
Removed WARN_ON(&dev_priv->pcu_lock) from lower level functions as generic
function now has lockdep_assert. Rebase.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-12-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-11-chris@chris-wilson.co.uk
Prepared intel_update_ring_freq function to setup ring frequency
for applicable platforms determined by macro HAS_LLC.
v2: Replaced NEEDS_RING_FREQ_UPDATE with HAS_LLC macro. (Chris)
Added check while calling from intel_enable_gt_powersave.
v3: s/intel_update_ring_freq/intel_enable_llc_pstate and created
new placeholder function intel_disable_llc_pstate. (Chris)
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-11-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-10-chris@chris-wilson.co.uk
This function gives the status of RC6, whether disabled or if
enabled then which state. intel_enable_rc6 will be used for
enabling RC6 in the next patch.
v2: Rebase.
v3: Rebase.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> #1
Reviewed-by: Ewelina Musial <ewelina.musial@intel.com> #1
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-10-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-9-chris@chris-wilson.co.uk
Prepared substructure rps for RPS related state. autoenable_work is
used for RC6 too hence it is defined outside rps structure. As we do
this lot many functions are refactored to use intel_rps *rps to access
rps related members. Hence renamed intel_rps_client pointer variables
to rps_client in various functions.
v2: Rebase.
v3: s/pm/gt_pm (Chris)
Refactored access to rps structure by declaring struct intel_rps * in
many functions.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> #1
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-9-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-8-chris@chris-wilson.co.uk
In order to separate GT PM related functionality into new structure
we are updating rps structure. hw_lock in it is used for display
related PCU communication too hence move it to dev_priv.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-8-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-7-chris@chris-wilson.co.uk
This patch separates enable/disable of RC6 and RPS for VLV.
v2: Removed unnecessary comments about forcewakes while enabling
RC6/RPS. Added changes to output turbo control status for VLV in
i915_frequency_info.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-5-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-4-chris@chris-wilson.co.uk
This patch separates RC6 and RPS enabling for BDW.
RC6/RPS Disabling are handled through gen6 functions.
PM Programming guide recommends a sequence within forcewakes to
configure RC6, RPS and ring frequencies in sequence. With this
patch the order is still maintained.
v2: Update sequence numbers in RC6 programming and comment about
intent of reset_rps during gen8_enable_rps. (Radoslaw)
v3: Rebase.
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-4-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-3-chris@chris-wilson.co.uk
This patch removes all IS_BROADWELL checks and non-BDW changes from
gen8_enable_rps as it is called only for BROADWELL.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-3-git-send-email-sagar.a.kamble@intel.com
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-2-chris@chris-wilson.co.uk
The HDMI controller found in the A31 SoCs is slightly different
from the one already supported, which is found in the A10s:
- Need different initial values for the PLL related registers
- Different behavior of the DDC and TMDS clocks
- Different register layout for the DDC portion
- Separate DDC parent clock
This patch adds support for it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-10-wens@csie.org
The DDC block for the HDMI controller is different on the A31.
This patch adds the register definitions.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-9-wens@csie.org
The HDMI controller found in earlier Allwinner SoCs have slight
differences between the A10, A10s, and the A31:
- Need different initial values for the PLL related registers
- Different behavior of the DDC and TMDS clocks
- Different register layout for the DDC portion
- Separate DDC parent clock on the A31
- Explicit reset control
For the A31, the HDMI TMDS clock has a different value offset for
the divider. The HDMI DDC block is different from the one in the
other SoCs. As far as the DDC clock goes, it has no pre-divider,
as it is clocked from a slower parent clock, not the TMDS clock.
The divider offset from the register value is different. And the
clock control register is at a different offset.
A new variant data structure is created to store pointers to the
above functions, structures, and the different initial values.
Another flag notates whether there is a separate DDC parent clock.
If not, the TMDS clock is passed to the DDC clock create function,
as before.
Regmap fields are used to deal with the different register layout
of the DDC block.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-8-wens@csie.org
The HDMI controller in the A31 SoC is slightly different from the
earlier version. In addition to the TMDS clock and DDC controls,
this version now takes a second DDC clock input.
Add a compatible string for it, and add the DDC clock input to the
list of clocks required.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-7-wens@csie.org
On SoCs with two display pipelines, it is possible that the two
pipelines are active at the same time, with potentially incompatible
dot clocks.
Let the HDMI encoder's TMDS clock go through all of its parents when
calculating possible clock rates. This allows usage of the second video
PLL as its parent.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-6-wens@csie.org
The HDMI driver is written with readl/writel I/O to the registers.
However, to support the A31 variant, which has a different layout
for the DDC registers, it was recommended to use regfields to have
a cleaner implementation. To use regfields, we need to create an
underlying regmap.
This patch only adds the regmap. It does not convert the existing
driver accesses to use regmap.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-5-wens@csie.org
The HDMI driver enables the bus and mod clocks in the bind function, but
does not disable them if it then bails our due to any errors. Neither
does it disable the clocks in the unbind function.
Fix this by adding a proper error path to the bind function, and
clk_disable_unprepare calls to the unbind function.
Also rename the err_cleanup_connector label to err_cleanup_encoder,
since it is the encoder that gets cleaned up.
Fixes: 9c5681011a ("drm/sun4i: Add HDMI support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-4-wens@csie.org
On systems with 2 TCONs such as the A31, it is possible to demux the
output of the TCONs to one encoder.
Add support for this for the A31.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-3-wens@csie.org
Different SoCs have different muxing options and values for the TCON
outputs. Instead of stuffing every possibility in sun4i_tcon_set_mux(),
add a callback pointer to sun4i_tcon_quirks that each TCON variant
can use to provide muxing support.
The current muxing options in sun4i_tcon_set_mux() for sun5i-a13 are
moved to a new sun5i-specific callback function.
Since the new callback replaces what the .has_unknown_mux field in
tcon quirks did in the past, the field is removed.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010032008.682-2-wens@csie.org
There's really no good reason to be using the kernel context for the
huge-page livetests. Also with the introduction of commit bef27bdb6c
("drm/i915: Assert we do not try to expand VMA for hugepage inside GGTT")
we start hitting the bug on in the selftests, since the kernel context
will always return true for i915_vma_is_ggtt(), so now seems like the
opportune time to instead create our own context.
Fixes: 4049866f09 ("drm/i915/selftests: huge page tests")
Fixes: bef27bdb6c ("drm/i915: Assert we do not try to expand VMA for hugepage inside GGTT")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010133030.12112-1-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
If we fail to allocate a 64k hugepage for scratch, we try again with a
normal 4k page (with some loss of efficiency at runtime). As we handle
this gracefully, we do not need a noisy allocation failure warning.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010111005.13625-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Remove dependency for I915_MAX_PIPES by replacing it with
for_each_pipe() macro.
v2: use 'enum pipe pipe' instead of 'i'
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507630626-23806-3-git-send-email-mika.kahola@intel.com
Let's remove the dependency on I915_MAX_PIPES. Instead, get the number
of pipes from platform information.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507630626-23806-2-git-send-email-mika.kahola@intel.com
There is function to tell how many ports we have, so use it.
We still have direct relationship with array size and port count,
so no harm was done.
Fixes: 76e70087d3 ("drm/i915: Make execlist port count variable")
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010114857.13108-1-mika.kuoppala@intel.com
4.14-rc1 gained the fancy new cross-release support in lockdep, which
seems to have uncovered a few more rules about what is allowed and
isn't.
This one here seems to indicate that allocating a work-queue while
holding mmap_sem is a no-go, so let's try to preallocate it.
Of course another way to break this chain would be somewhere in the
cpu hotplug code, since this isn't the only trace we're finding now
which goes through msr_create_device.
Full lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
4.14.0-rc1-CI-CI_DRM_3118+ #1 Tainted: G U
------------------------------------------------------
prime_mmap/1551 is trying to acquire lock:
(cpu_hotplug_lock.rw_sem){++++}, at: [<ffffffff8109dbb7>] apply_workqueue_attrs+0x17/0x50
but task is already holding lock:
(&dev_priv->mm_lock){+.+.}, at: [<ffffffffa01a7b2a>] i915_gem_userptr_init__mmu_notifier+0x14a/0x270 [i915]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #6 (&dev_priv->mm_lock){+.+.}:
__lock_acquire+0x1420/0x15e0
lock_acquire+0xb0/0x200
__mutex_lock+0x86/0x9b0
mutex_lock_nested+0x1b/0x20
i915_gem_userptr_init__mmu_notifier+0x14a/0x270 [i915]
i915_gem_userptr_ioctl+0x222/0x2c0 [i915]
drm_ioctl_kernel+0x69/0xb0
drm_ioctl+0x2f9/0x3d0
do_vfs_ioctl+0x94/0x670
SyS_ioctl+0x41/0x70
entry_SYSCALL_64_fastpath+0x1c/0xb1
-> #5 (&mm->mmap_sem){++++}:
__lock_acquire+0x1420/0x15e0
lock_acquire+0xb0/0x200
__might_fault+0x68/0x90
_copy_to_user+0x23/0x70
filldir+0xa5/0x120
dcache_readdir+0xf9/0x170
iterate_dir+0x69/0x1a0
SyS_getdents+0xa5/0x140
entry_SYSCALL_64_fastpath+0x1c/0xb1
-> #4 (&sb->s_type->i_mutex_key#5){++++}:
down_write+0x3b/0x70
handle_create+0xcb/0x1e0
devtmpfsd+0x139/0x180
kthread+0x152/0x190
ret_from_fork+0x27/0x40
-> #3 ((complete)&req.done){+.+.}:
__lock_acquire+0x1420/0x15e0
lock_acquire+0xb0/0x200
wait_for_common+0x58/0x210
wait_for_completion+0x1d/0x20
devtmpfs_create_node+0x13d/0x160
device_add+0x5eb/0x620
device_create_groups_vargs+0xe0/0xf0
device_create+0x3a/0x40
msr_device_create+0x2b/0x40
cpuhp_invoke_callback+0xa3/0x840
cpuhp_thread_fun+0x7a/0x150
smpboot_thread_fn+0x18a/0x280
kthread+0x152/0x190
ret_from_fork+0x27/0x40
-> #2 (cpuhp_state){+.+.}:
__lock_acquire+0x1420/0x15e0
lock_acquire+0xb0/0x200
cpuhp_issue_call+0x10b/0x170
__cpuhp_setup_state_cpuslocked+0x134/0x2a0
__cpuhp_setup_state+0x46/0x60
page_writeback_init+0x43/0x67
pagecache_init+0x3d/0x42
start_kernel+0x3a8/0x3fc
x86_64_start_reservations+0x2a/0x2c
x86_64_start_kernel+0x6d/0x70
verify_cpu+0x0/0xfb
-> #1 (cpuhp_state_mutex){+.+.}:
__lock_acquire+0x1420/0x15e0
lock_acquire+0xb0/0x200
__mutex_lock+0x86/0x9b0
mutex_lock_nested+0x1b/0x20
__cpuhp_setup_state_cpuslocked+0x52/0x2a0
__cpuhp_setup_state+0x46/0x60
page_alloc_init+0x28/0x30
start_kernel+0x145/0x3fc
x86_64_start_reservations+0x2a/0x2c
x86_64_start_kernel+0x6d/0x70
verify_cpu+0x0/0xfb
-> #0 (cpu_hotplug_lock.rw_sem){++++}:
check_prev_add+0x430/0x840
__lock_acquire+0x1420/0x15e0
lock_acquire+0xb0/0x200
cpus_read_lock+0x3d/0xb0
apply_workqueue_attrs+0x17/0x50
__alloc_workqueue_key+0x1d8/0x4d9
i915_gem_userptr_init__mmu_notifier+0x1fb/0x270 [i915]
i915_gem_userptr_ioctl+0x222/0x2c0 [i915]
drm_ioctl_kernel+0x69/0xb0
drm_ioctl+0x2f9/0x3d0
do_vfs_ioctl+0x94/0x670
SyS_ioctl+0x41/0x70
entry_SYSCALL_64_fastpath+0x1c/0xb1
other info that might help us debug this:
Chain exists of:
cpu_hotplug_lock.rw_sem --> &mm->mmap_sem --> &dev_priv->mm_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&dev_priv->mm_lock);
lock(&mm->mmap_sem);
lock(&dev_priv->mm_lock);
lock(cpu_hotplug_lock.rw_sem);
*** DEADLOCK ***
2 locks held by prime_mmap/1551:
#0: (&mm->mmap_sem){++++}, at: [<ffffffffa01a7b18>] i915_gem_userptr_init__mmu_notifier+0x138/0x270 [i915]
#1: (&dev_priv->mm_lock){+.+.}, at: [<ffffffffa01a7b2a>] i915_gem_userptr_init__mmu_notifier+0x14a/0x270 [i915]
stack backtrace:
CPU: 4 PID: 1551 Comm: prime_mmap Tainted: G U 4.14.0-rc1-CI-CI_DRM_3118+ #1
Hardware name: Dell Inc. XPS 8300 /0Y2MRG, BIOS A06 10/17/2011
Call Trace:
dump_stack+0x68/0x9f
print_circular_bug+0x235/0x3c0
? lockdep_init_map_crosslock+0x20/0x20
check_prev_add+0x430/0x840
__lock_acquire+0x1420/0x15e0
? __lock_acquire+0x1420/0x15e0
? lockdep_init_map_crosslock+0x20/0x20
lock_acquire+0xb0/0x200
? apply_workqueue_attrs+0x17/0x50
cpus_read_lock+0x3d/0xb0
? apply_workqueue_attrs+0x17/0x50
apply_workqueue_attrs+0x17/0x50
__alloc_workqueue_key+0x1d8/0x4d9
? __lockdep_init_map+0x57/0x1c0
i915_gem_userptr_init__mmu_notifier+0x1fb/0x270 [i915]
i915_gem_userptr_ioctl+0x222/0x2c0 [i915]
? i915_gem_userptr_release+0x140/0x140 [i915]
drm_ioctl_kernel+0x69/0xb0
drm_ioctl+0x2f9/0x3d0
? i915_gem_userptr_release+0x140/0x140 [i915]
? __do_page_fault+0x2a4/0x570
do_vfs_ioctl+0x94/0x670
? entry_SYSCALL_64_fastpath+0x5/0xb1
? __this_cpu_preempt_check+0x13/0x20
? trace_hardirqs_on_caller+0xe3/0x1b0
SyS_ioctl+0x41/0x70
entry_SYSCALL_64_fastpath+0x1c/0xb1
RIP: 0033:0x7fbb83c39587
RSP: 002b:00007fff188dc228 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: ffffffff81492963 RCX: 00007fbb83c39587
RDX: 00007fff188dc260 RSI: 00000000c0186473 RDI: 0000000000000003
RBP: ffffc90001487f88 R08: 0000000000000000 R09: 00007fff188dc2ac
R10: 00007fbb83efcb58 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000003 R14: 00000000c0186473 R15: 00007fff188dc2ac
? __this_cpu_preempt_check+0x13/0x20
Note that this also has the minor benefit of slightly reducing the
critical section where we hold mmap_sem.
v2: Set ret correctly when we raced with another thread.
v3: Use Chris' diff. Attach the right lockdep splat.
v4: Repaint in Tvrtko's colors (aka don't report ENOMEM if we race and
some other thread managed to not also get an ENOMEM and successfully
install the mmu notifier. Note that the kernel guarantees that small
allocations succeed, so this never actually happens).
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sasha Levin <alexander.levin@verizon.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Cc: Tejun Heo <tj@kernel.org>
References: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_3180/shard-hsw3/igt@prime_mmap@test_userptr.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102939
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171009164401.16035-1-daniel.vetter@ffwll.ch
There is no reason to wait for clock stabilization here, as the clock
framework guarantees that PLL clock sources are stable before clk_enable
returns.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
