Commit Graph

52 Commits

Author SHA1 Message Date
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Christoph Hellwig
860bda29b9 sunrpc: mark all struct svc_procinfo instances as const
struct svc_procinfo contains function pointers, and marking it as
constant avoids it being able to be used as an attach vector for
code injections.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-15 17:42:31 +02:00
Christoph Hellwig
63f8de3795 sunrpc: properly type pc_encode callbacks
Drop the resp argument as it can trivially be derived from the rqstp
argument.  With that all functions now have the same prototype, and we
can remove the unsafe casting to kxdrproc_t.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-05-15 17:42:25 +02:00
Christoph Hellwig
026fec7e7c sunrpc: properly type pc_decode callbacks
Drop the argp argument as it can trivially be derived from the rqstp
argument.  With that all functions now have the same prototype, and we
can remove the unsafe casting to kxdrproc_t.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-15 17:42:24 +02:00
Christoph Hellwig
a6beb73272 sunrpc: properly type pc_func callbacks
Drop the argp and resp arguments as they can trivially be derived from
the rqstp argument.  With that all functions now have the same prototype,
and we can remove the unsafe casting to svc_procfunc as well as the
svc_procfunc typedef itself.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-15 17:42:23 +02:00
Andrey Ryabinin
0ad95472bf lockd: create NSM handles per net namespace
Commit cb7323fffa ("lockd: create and use per-net NSM
 RPC clients on MON/UNMON requests") introduced per-net
NSM RPC clients. Unfortunately this doesn't make any sense
without per-net nsm_handle.

E.g. the following scenario could happen
Two hosts (X and Y) in different namespaces (A and B) share
the same nsm struct.

1. nsm_monitor(host_X) called => NSM rpc client created,
	nsm->sm_monitored bit set.
2. nsm_mointor(host-Y) called => nsm->sm_monitored already set,
	we just exit. Thus in namespace B ln->nsm_clnt == NULL.
3. host X destroyed => nsm->sm_count decremented to 1
4. host Y destroyed => nsm_unmonitor() => nsm_mon_unmon() => NULL-ptr
	dereference of *ln->nsm_clnt

So this could be fixed by making per-net nsm_handles list,
instead of global. Thus different net namespaces will not be able
share the same nsm_handle.

Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-10-12 17:31:05 -04:00
Trond Myklebust
cd0b16c1c3 NLM: nlm_lookup_file() may return NLMv4-specific error codes
If the filehandle is stale, or open access is denied for some reason,
nlm_fopen() may return one of the NLMv4-specific error codes nlm4_stale_fh
or nlm4_failed. These get passed right through nlm_lookup_file(),
and so when nlmsvc_retrieve_args() calls the latter, it needs to filter
the result through the cast_status() machinery.

Failure to do so, will trigger the BUG_ON() in encode_nlm_stat...

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Reported-by: Larry McVoy <lm@bitmover.com>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-10-17 10:14:14 -04:00
Linus Torvalds
a0e881b7c1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull second vfs pile from Al Viro:
 "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the
  deadlock reproduced by xfstests 068), symlink and hardlink restriction
  patches, plus assorted cleanups and fixes.

  Note that another fsfreeze deadlock (emergency thaw one) is *not*
  dealt with - the series by Fernando conflicts a lot with Jan's, breaks
  userland ABI (FIFREEZE semantics gets changed) and trades the deadlock
  for massive vfsmount leak; this is going to be handled next cycle.
  There probably will be another pull request, but that stuff won't be
  in it."

Fix up trivial conflicts due to unrelated changes next to each other in
drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c}

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
  delousing target_core_file a bit
  Documentation: Correct s_umount state for freeze_fs/unfreeze_fs
  fs: Remove old freezing mechanism
  ext2: Implement freezing
  btrfs: Convert to new freezing mechanism
  nilfs2: Convert to new freezing mechanism
  ntfs: Convert to new freezing mechanism
  fuse: Convert to new freezing mechanism
  gfs2: Convert to new freezing mechanism
  ocfs2: Convert to new freezing mechanism
  xfs: Convert to new freezing code
  ext4: Convert to new freezing mechanism
  fs: Protect write paths by sb_start_write - sb_end_write
  fs: Skip atime update on frozen filesystem
  fs: Add freezing handling to mnt_want_write() / mnt_drop_write()
  fs: Improve filesystem freezing handling
  switch the protection of percpu_counter list to spinlock
  nfsd: Push mnt_want_write() outside of i_mutex
  btrfs: Push mnt_want_write() outside of i_mutex
  fat: Push mnt_want_write() outside of i_mutex
  ...
2012-08-01 10:26:23 -07:00
Al Viro
446945ab9a lockd: shift grabbing a reference to nlm_host into nlm_alloc_call()
It's used both for client and server hosts; we can't do nlmclnt_release_host()
on failure exits, since the host might need nlmsvc_release_host(), with BUG_ON()
for calling the wrong one.  Makes life simpler for callers, actually...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-29 23:09:57 +04:00
Stanislav Kinsbursky
5ccb0066f2 LockD: pass actual network namespace to grace period management functions
Passed network namespace replaced hard-coded init_net

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-07-27 16:49:22 -04:00
Chuck Lever
67216b94d4 lockd: Clean up nlmsvc_lookup_host()
Clean up.

Change nlmsvc_lookup_host() to be purpose-built for server-side
nlm_host management.  This replaces the generic nlm_lookup_host()
helper function, just like on the client side.  The lookup logic is
specialized for server host lookups.

The server side cache also gets its own specialized equivalent of the
nlm_release_host() function.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16 12:37:26 -05:00
Chuck Lever
7db836d4a4 lockd: Split nlm_release_call()
The nlm_release_call() function is invoked from both the server and
the client side.  We're about to introduce a distinct server- and
client-side nlm_release_host(), so nlm_release_call() must first be
split into a client-side and a server-side version.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-12-16 12:37:26 -05:00
Arnd Bergmann
451a3c24b0 BKL: remove extraneous #include <smp_lock.h>
The big kernel lock has been removed from all these files at some point,
leaving only the #include.

Remove this too as a cleanup.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-17 08:59:32 -08:00
Bryan Schumaker
f904be9cc7 lockd: Mostly remove BKL from the server
This patch removes all but one call to lock_kernel() from the server.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2010-09-22 15:32:58 -04:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Boaz Harrosh
0296f55f98 lockd: Remove un-used nfsd headers #includes
In what history where these ever needed? Well not
any more.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-12-14 18:12:11 -05:00
Alexey Dobriyan
405f55712d headers: smp_lock.h redux
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
  It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT

  This will make hardirq.h inclusion cheaper for every PREEMPT=n config
  (which includes allmodconfig/allyesconfig, BTW)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-12 12:22:34 -07:00
Chuck Lever
e6765b8397 NSM: Remove include/linux/lockd/sm_inter.h
Clean up: The include/linux/lockd/sm_inter.h header is nearly empty
now.  Remove it.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:55 -05:00
Chuck Lever
7fefc9cb9d NLM: Change nlm_host_rebooted() to take a single nlm_reboot argument
Pass the nlm_reboot data structure directly from the NLMPROC_SM_NOTIFY
XDR decoders to nlm_host_rebooted().  This eliminates some packing and
unpacking of the NLMPROC_SM_NOTIFY results, and prepares for passing
these results, including the "priv" cookie, directly to a lookup
routine in fs/lockd/mon.c.

This patch changes code organization but should not cause any
behavioral change.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-01-06 11:53:54 -05:00
Chuck Lever
d7dc61d0a7 NLM: Set address family before calling nlm_host_rebooted()
The nlm_host_rebooted() function uses nlm_cmp_addr() to find an
nsm_handle that matches the rebooted peer.  In order for this to work,
the passed-in address must have a proper address family.

This fixes a post-2.6.28 regression introduced by commit 781b61a6, which
added AF_INET6 support to nlm_cmp_addr().  Before that commit,
nlm_cmp_addr() didn't care about the address family; it compared only
the sin_addr.s_addr field for equality.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-10-30 17:19:30 -04:00
Chuck Lever
b85e467634 lockd: Add helper to sanity check incoming NOTIFY requests
lockd accepts SM_NOTIFY calls only from a privileged process on the
local system.  If lockd uses an AF_INET6 listener, the sender's address
(ie the local rpc.statd) will be the IPv6 loopback address, not the
IPv4 loopback address.

Make sure the privilege test in nlmsvc_proc_sm_notify() and
nlm4svc_proc_sm_notify() works for both AF_INET and AF_INET6 family
addresses by refactoring the test into a helper and adding support for
IPv6 addresses.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-10-03 17:02:35 -04:00
Chuck Lever
dcff09f124 lockd: change nlmclnt_grant() to take a "struct sockaddr *"
Adjust the signature and callers of nlmclnt_grant() to pass a "struct
sockaddr *" instead of a "struct sockaddr_in *" in order to support IPv6
addresses.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-10-03 17:02:35 -04:00
J. Bruce Fields
b2b5028905 lockd: move grace period checks to common code
Do all the grace period checks in svclock.c.  This simplifies the code a
bit, and will ease some later changes.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-10-03 16:19:19 -04:00
J. Bruce Fields
af558e33be nfsd: common grace period control
Rewrite grace period code to unify management of grace period across
lockd and nfsd.  The current code has lockd and nfsd cooperate to
compute a grace period which is satisfactory to them both, and then
individually enforce it.  This creates a slight race condition, since
the enforcement is not coordinated.  It's also more complicated than
necessary.

Here instead we have lockd and nfsd each inform common code when they
enter the grace period, and when they're ready to leave the grace
period, and allow normal locking only after both of them are ready to
leave.

We also expect the locks_start_grace()/locks_end_grace() interface here
to be simpler to build on for future cluster/high-availability work,
which may require (for example) putting individual filesystems into
grace, or enforcing grace periods across multiple cluster nodes.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-10-03 16:19:02 -04:00
Harvey Harrison
317602f3e0 lockd: trivial sparse endian annotations
fs/lockd/svcproc.c:115:11: warning: incorrect type in initializer (different base types)
fs/lockd/svcproc.c:115:11:    expected int [signed] rc
fs/lockd/svcproc.c:115:11:    got restricted __be32 [usertype] <noident>
... and so on...

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-07-23 07:38:04 -04:00
Linus Torvalds
14b395e35d Merge branch 'for-2.6.27' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.27' of git://linux-nfs.org/~bfields/linux: (51 commits)
  nfsd: nfs4xdr.c do-while is not a compound statement
  nfsd: Use C99 initializers in fs/nfsd/nfs4xdr.c
  lockd: Pass "struct sockaddr *" to new failover-by-IP function
  lockd: get host reference in nlmsvc_create_block() instead of callers
  lockd: minor svclock.c style fixes
  lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_lock
  lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_testlock
  lockd: nlm_release_host() checks for NULL, caller needn't
  file lock: reorder struct file_lock to save space on 64 bit builds
  nfsd: take file and mnt write in nfs4_upgrade_open
  nfsd: document open share bit tracking
  nfsd: tabulate nfs4 xdr encoding functions
  nfsd: dprint operation names
  svcrdma: Change WR context get/put to use the kmem cache
  svcrdma: Create a kmem cache for the WR contexts
  svcrdma: Add flush_scheduled_work to module exit function
  svcrdma: Limit ORD based on client's advertised IRD
  svcrdma: Remove unused wait q from svcrdma_xprt structure
  svcrdma: Remove unneeded spin locks from __svc_rdma_free
  svcrdma: Add dma map count and WARN_ON
  ...
2008-07-20 21:21:46 -07:00
Trond Myklebust
a86dc496b7 SUNRPC: Remove the BKL from the callback functions
Push it into those callback functions that actually need it.

Note that all the NFS operations use their own locking, so don't need the
BKL. Ditto for the rpcbind client.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-15 18:10:57 -04:00
Jeff Layton
6cde4de807 lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_lock
nlmsvc_lock calls nlmsvc_lookup_host to find a nlm_host struct. The
callers of this function, however, call nlmsvc_retrieve_args or
nlm4svc_retrieve_args, which also return a nlm_host struct.

Change nlmsvc_lock to take a host arg instead of calling
nlmsvc_lookup_host itself and change the callers to pass a pointer to
the nlm_host they've already found.

Since nlmsvc_testlock() now just uses the caller's reference, we no
longer need to get or release it.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-07-15 14:53:33 -04:00
Jeff Layton
8f920d5e29 lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_testlock
nlmsvc_testlock calls nlmsvc_lookup_host to find a nlm_host struct. The
callers of this functions, however, call nlmsvc_retrieve_args or
nlm4svc_retrieve_args, which also return a nlm_host struct.

Change nlmsvc_testlock to take a host arg instead of calling
nlmsvc_lookup_host itself and change the callers to pass a pointer to
the nlm_host they've already found.

We take a reference to host in the place where nlmsvc_testlock()
previous did a new lookup, so the reference counting is unchanged from
before.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-07-15 14:26:52 -04:00
Jeff Layton
b0e92aae15 lockd: nlm_release_host() checks for NULL, caller needn't
No need to check for a NULL argument twice.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-07-15 12:35:20 -04:00
Oleg Drokin
b7e6b86948 lockd: fix reference count leaks in async locking case
In a number of places where we wish only to translate nlm_drop_reply to
rpc_drop_reply errors we instead return early with rpc_drop_reply,
skipping some important end-of-function cleanup.

This results in reference count leaks when lockd is doing posix locking
on GFS2.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-02-01 16:42:06 -05:00
Marc Eshel
1a8322b2b0 lockd: add code to handle deferred lock requests
Rewrite nlmsvc_lock() to use the asynchronous interface.

As with testlock, we answer nlm requests in nlmsvc_lock by first looking up
the block and then using the results we find in the block if B_QUEUED is
set, and calling vfs_lock_file() otherwise.

If this a new lock request and we get -EINPROGRESS return on a non-blocking
request then we defer the request.

Also modify nlmsvc_unlock() to call the filesystem method if appropriate.

Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-05-06 20:38:50 -04:00
Marc Eshel
5ea0d75037 lockd: handle test_lock deferrals
Rewrite nlmsvc_testlock() to use the new asynchronous interface: instead of
immediately doing a posix_test_lock(), we first look for a matching block.
If the subsequent test_lock returns anything other than -EINPROGRESS, we
then remove the block we've found and return the results.

If it returns -EINPROGRESS, then we defer the lock request.

In the case where the block we find in the first step has B_QUEUED set,
we bypass the vfs_test_lock entirely, instead using the block to decide how
to respond:
	with nlm_lck_denied if B_TIMED_OUT is set.
	with nlm_granted if B_GOT_CALLBACK is set.
	by dropping if neither B_TIMED_OUT nor B_GOT_CALLBACK is set

Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-05-06 20:38:50 -04:00
Marc Eshel
85f3f1b3f7 lockd: pass cookie in nlmsvc_testlock
Change NLM internal interface to pass more information for test lock; we
need this to make sure the cookie information is pushed down to the place
where we do request deferral, which is handled for testlock by the
following patch.

Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-05-06 20:38:50 -04:00
Chuck Lever
27459f0940 [PATCH] knfsd: SUNRPC: Provide room in svc_rqst for larger addresses
Expand the rq_addr field to allow it to contain larger addresses.

Specifically, we replace a 'sockaddr_in' with a 'sockaddr_storage', then
everywhere the 'sockaddr_in' was referenced, we use instead an accessor
function (svc_addr_in) which safely casts the _storage to _in.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:36 -08:00
Chuck Lever
ad06e4bd62 [PATCH] knfsd: SUNRPC: Add a function to format the address in an svc_rqst for printing
There are loads of places where the RPC server assumes that the rq_addr fields
contains an IPv4 address.  Top among these are error and debugging messages
that display the server's IP address.

Let's refactor the address printing into a separate function that's smart
enough to figure out the difference between IPv4 and IPv6 addresses.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:35 -08:00
Chuck Lever
c041b5ff8d NLM: fix print format for tk_pid
The tk_pid field is an unsigned short.  The proper print format specifier for
that type is %5u, not %4d.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-12-06 10:46:54 -05:00
Al Viro
52921e02a4 [PATCH] lockd endianness annotations
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20 10:26:40 -07:00
Al Viro
7111c66e4e [PATCH] fix svc_procfunc declaration
svc_procfunc instances return __be32, not int

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20 10:26:40 -07:00
NeilBrown
d343fce148 [PATCH] knfsd: Allow lockd to drop replies as appropriate
It is possible for the ->fopen callback from lockd into nfsd to find that an
answer cannot be given straight away (an upcall is needed) and so the request
has to be 'dropped', to be retried later.  That error status is not currently
propagated back.

So:
  Change nlm_fopen to return nlm error codes (rather than a private
  protocol) and define a new nlm_drop_reply code.
  Cause nlm_drop_reply to cause the rpc request to get rpc_drop_reply
  when this error comes back.
  Cause svc_process to drop a request which returns a status of
  rpc_drop_reply.

[akpm@osdl.org: fix warning storm]
Cc: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17 08:18:46 -07:00
Olaf Kirch
39be4502cb [PATCH] knfsd: match GRANTED_RES replies using cookies
When we send a GRANTED_MSG call, we current copy the NLM cookie provided in
the original LOCK call - because in 1996, some broken clients seemed to rely
on this bug.  However, this means the cookies are not unique, so that when the
client's GRANTED_RES message comes back, we cannot simply match it based on
the cookie, but have to use the client's IP address in addition.  Which breaks
when you have a multi-homed NFS client.

The X/Open spec explicitly mentions that clients should not expect the same
cookie; so one may hope that any clients that were broken in 1996 have either
been fixed or rendered obsolete.

Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:18 -07:00
Olaf Kirch
5c8dd29ca7 [PATCH] knfsd: lockd: Make nlm_host_rebooted use the nsm_handle
This patch makes the SM_NOTIFY handling understand and use the nsm_handle.

To make it a bit clear what is happening:

    nlmclent_prepare_reclaim and nlmclnt_finish_reclaim
    get open-coded into 'reclaimer'

The result is tidied up.

Then some of that functionality is moved out into nlm_host_rebooted (which
calls nlmclnt_recovery which starts a thread which runs reclaimer).

Also host_rebooted now finds an nsm_handle rather than a host, then then
iterates over all hosts and deals with each host that shares that nsm_handle.

Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:17 -07:00
Olaf Kirch
db4e4c9a9e [PATCH] knfsd: when looking up a lockd host, pass hostname & length
This patch adds the peer's hostname (and name length) to all calls to
nlm*_lookup_host functions.  A subsequent patch will make use of these (is
requested by a sysctl).

Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:16 -07:00
Olaf Kirch
cf712c24d7 [PATCH] knfsd: consolidate common code for statd->lockd notification
Common code from nlm4svc_proc_sm_notify and nlmsvc_proc_sm_notify is moved
into a new nlm_host_rebooted.

This is in preparation of a patch that will change the reboot notification
handling entirely.

Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:16 -07:00
Olaf Kirch
977faf392f [PATCH] knfsd: hide use of lockd's h_monitored flag
This patch moves all checks of the h_monitored flag into the
nsm_monitor/unmonitor functions.  A subsequent patch will replace the
mechanism by which we mark a host as being monitored.

There is still one occurence of h_monitored outside of mon.c and that is in
clntlock.c where we respond to a reboot.  The subsequent patch will modify
this too.

Signed-off-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:16 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Trond Myklebust
d471662448 lockd: Add helper for *_RES callbacks
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-03-20 13:44:45 -05:00
Trond Myklebust
92737230dd NLM: Add nlmclnt_release_call
Add a helper function to simplify the freeing of NLM client requests.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-03-20 13:44:45 -05:00
Trond Myklebust
686517f1ad lockd: Make nlmsvc_create_block() use nlmsvc_lookup_host()
Currently it uses nlmclnt_lookup_host(), which puts the resulting host
structure on a different list.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2006-03-20 13:44:39 -05:00
Trond Myklebust
5ac5f9d1ce [PATCH] NLM: Fix the NLM_GRANTED callback checks
If 2 threads attached to the same process are blocking on different locks on
different files (maybe even on different servers) but have the same lock
arguments (i.e.  same offset+length - actually quite common, since most
processes try to lock the entire file) then the first GRANTED call that wakes
one up will also wake the other.

Currently when the NLM_GRANTED callback comes in, lockd walks the list of
blocked locks in search of a match to the lock that the NLM server has
granted.  Although it checks the lock pid, start and end, it fails to check
the filehandle and the server address.

By checking the filehandle and server IP address, we ensure that this only
happens if the locks truly are referencing the same file.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-14 16:09:34 -08:00