Comment says ELF header is "too large to be on stack". 64 bytes on
64-bit is not large by any means.
Link: http://lkml.kernel.org/r/20191222143850.GA24341@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If some mapping goes past TASK_SIZE it will be rejected by kernel which
means no such userspace binaries exist.
Mark every such check as unlikely.
Link: http://lkml.kernel.org/r/20191215124355.GA21124@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
"current->mm" pointer is stable in general except few cases one of which
execve(2). Compiler can't treat is as stable but it _is_ stable most of
the time. During ELF loading process ->mm becomes stable right after
flush_old_exec().
Help compiler by caching current->mm, otherwise it continues to refetch
it.
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-141 (-141)
Function old new delta
elf_core_dump 5062 5039 -23
load_elf_binary 5426 5308 -118
Note: other cases are left as is because it is either pessimisation or
no change in binary size.
Link: http://lkml.kernel.org/r/20191215124755.GB21124@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ELF header is read into bprm->buf[] by generic execve code.
Save a memcpy and allocate just one header for the interpreter instead
of two headers (64 bytes instead of 128 on 64-bit).
Link: http://lkml.kernel.org/r/20191208171242.GA19716@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Only executable segments should be accounted to ->start_code just like
they do to ->end_code (correctly).
Link: http://lkml.kernel.org/r/20191208171410.GB19716@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Filling auxv vector as array with index (auxv[i++] = ...) generates
terrible code. "saved_auxv" should be reworked because it is the worst
member of mm_struct by size/usefullness ratio but do it later.
Meanwhile help gcc a little with *auxv++ idiom.
Space savings on x86_64:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-127 (-127)
Function old new delta
load_elf_binary 5470 5343 -127
Link: http://lkml.kernel.org/r/20191208172301.GD19716@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It saves 25% of .text for arm64, and more for BE architectures.
Before:
$ size lib/find_bit.o
text data bss dec hex filename
1012 56 0 1068 42c lib/find_bit.o
After:
$ size lib/find_bit.o
text data bss dec hex filename
776 56 0 832 340 lib/find_bit.o
Link: http://lkml.kernel.org/r/20200103202846.21616-3-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Allison Randal <allison@lohutok.net>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
_find_next_bit and _find_next_bit_le are very similar functions. It's
possible to join them by adding 1 parameter and a couple of simple
checks. It's simplify maintenance and make possible to shrink the size
of .text by un-inlining the unified function (in the following patch).
Link: http://lkml.kernel.org/r/20200103202846.21616-2-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ext2_swab() is defined locally in lib/find_bit.c However it is not
specific to ext2, neither to bitmaps.
There are many potential users of it, so rename it to just swab() and
move to include/uapi/linux/swab.h
ABI guarantees that size of unsigned long corresponds to BITS_PER_LONG,
therefore drop unneeded cast.
Link: http://lkml.kernel.org/r/20200103202846.21616-1-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Joe Perches <joe@perches.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clang warns:
../lib/scatterlist.c:314:5: warning: misleading indentation; statement
is not part of the previous 'if' [-Wmisleading-indentation]
return -ENOMEM;
^
../lib/scatterlist.c:311:4: note: previous statement is here
if (prv)
^
1 warning generated.
This warning occurs because there is a space before the tab on this
line. Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.
Link: http://lkml.kernel.org/r/20191218033606.11942-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/830
Fixes: edce6820a9 ("scatterlist: prevent invalid free when alloc fails")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order to benefit from s390 zlib hardware compression support,
increase the btrfs zlib workspace buffer size from 1 to 4 pages (if s390
zlib hardware support is enabled on the machine).
This brings up to 60% better performance in hardware on s390 compared to
the PAGE_SIZE buffer and much more compared to the software zlib
processing in btrfs. In case of memory pressure, fall back to a single
page buffer during workspace allocation.
The data compressed with larger input buffers will still conform to zlib
standard and thus can be decompressed also on a systems that uses only
PAGE_SIZE buffer for btrfs zlib.
Link: http://lkml.kernel.org/r/20200108105103.29028-1-zaslonko@linux.ibm.com
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Eduard Shishkin <edward6@linux.ibm.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a new function to zlib.h checking if s390 Deflate-Conversion
facility is installed and enabled.
Link: http://lkml.kernel.org/r/20200103223334.20669-6-zaslonko@linux.ibm.com
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Eduard Shishkin <edward6@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the new kernel command line parameter 'dfltcc=' to configure s390
zlib hardware support.
Format: { on | off | def_only | inf_only | always }
on: s390 zlib hardware support for compression on
level 1 and decompression (default)
off: No s390 zlib hardware support
def_only: s390 zlib hardware support for deflate
only (compression on level 1)
inf_only: s390 zlib hardware support for inflate
only (decompression)
always: Same as 'on' but ignores the selected compression
level always using hardware support (used for debugging)
Link: http://lkml.kernel.org/r/20200103223334.20669-5-zaslonko@linux.ibm.com
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Eduard Shishkin <edward6@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change the conflicting macro name in preparation for zlib_inflate
hardware support.
Link: http://lkml.kernel.org/r/20200103223334.20669-3-zaslonko@linux.ibm.com
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "S390 hardware support for kernel zlib", v3.
With IBM z15 mainframe the new DFLTCC instruction is available. It
implements deflate algorithm in hardware (Nest Acceleration Unit - NXU)
with estimated compression and decompression performance orders of
magnitude faster than the current zlib.
This patchset adds s390 hardware compression support to kernel zlib.
The code is based on the userspace zlib implementation:
https://github.com/madler/zlib/pull/410
The coding style is also preserved for future maintainability. There is
only limited set of userspace zlib functions represented in kernel.
Apart from that, all the memory allocation should be performed in
advance. Thus, the workarea structures are extended with the parameter
lists required for the DEFLATE CONVENTION CALL instruction.
Since kernel zlib itself does not support gzip headers, only Adler-32
checksum is processed (also can be produced by DFLTCC facility). Like
it was implemented for userspace, kernel zlib will compress in hardware
on level 1, and in software on all other levels. Decompression will
always happen in hardware (when enabled).
Two DFLTCC compression calls produce the same results only when they
both are made on machines of the same generation, and when the
respective buffers have the same offset relative to the start of the
page. Therefore care should be taken when using hardware compression
when reproducible results are desired. However it does always produce
the standard conform output which can be inflated anyway.
The new kernel command line parameter 'dfltcc' is introduced to
configure s390 zlib hardware support:
Format: { on | off | def_only | inf_only | always }
on: s390 zlib hardware support for compression on
level 1 and decompression (default)
off: No s390 zlib hardware support
def_only: s390 zlib hardware support for deflate
only (compression on level 1)
inf_only: s390 zlib hardware support for inflate
only (decompression)
always: Same as 'on' but ignores the selected compression
level always using hardware support (used for debugging)
The main purpose of the integration of the NXU support into the kernel
zlib is the use of hardware deflate in btrfs filesystem with on-the-fly
compression enabled. Apart from that, hardware support can also be used
during boot for decompressing the kernel or the ramdisk image
With the patch for btrfs expanding zlib buffer from 1 to 4 pages (patch
6) the following performance results have been achieved using the
ramdisk with btrfs. These are relative numbers based on throughput rate
and compression ratio for zlib level 1:
Input data Deflate rate Inflate rate Compression ratio
NXU/Software NXU/Software NXU/Software
stream of zeroes 1.46 1.02 1.00
random ASCII data 10.44 3.00 0.96
ASCII text (dickens) 6,21 3.33 0.94
binary data (vmlinux) 8,37 3.90 1.02
This means that s390 hardware deflate can provide up to 10 times faster
compression (on level 1) and up to 4 times faster decompression (refers
to all compression levels) for btrfs zlib.
Disclaimer: Performance results are based on IBM internal tests using DD
command-line utility on btrfs on a Fedora 30 based internal driver in
native LPAR on a z15 system. Results may vary based on individual
workload, configuration and software levels.
This patch (of 9):
Create zlib_dfltcc library with the s390 DEFLATE CONVERSION CALL
implementation and related compression functions. Update zlib_deflate
functions with the hooks for s390 hardware support and adjust workspace
structures with extra parameter lists required for hardware deflate.
Link: http://lkml.kernel.org/r/20200103223334.20669-2-zaslonko@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Co-developed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Chris Mason <clm@fb.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Eduard Shishkin <edward6@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This switches the iwlegacy driver to use celsius_to_kelvin() and
kelvin_to_celsius() in <linux/units.h>.
[akinobu.mita@gmail.com: fix build warnings with format string]
Link: http://lkml.kernel.org/r/1579014483-9226-1-git-send-email-akinobu.mita@gmail.com
Link: https://lore.kernel.org/r/20200106171452.201c3b4c@canb.auug.org.au
Link: http://lkml.kernel.org/r/1576386975-7941-10-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This switches the intel pch thermal driver to use
deci_kelvin_to_millicelsius() in <linux/units.h> instead of helpers in
<linux/thermal.h>.
This is preparation for centralizing the kelvin to/from Celsius
conversion helpers in <linux/units.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-7-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This switches the int340x thermal zone driver to use
deci_kelvin_to_millicelsius() and millicelsius_to_deci_kelvin() in
<linux/units.h> instead of helpers in <linux/thermal.h>.
This is preparation for centralizing the kelvin to/from Celsius
conversion helpers in <linux/units.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-6-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This switches the intel_menlow driver to use deci_kelvin_to_celsius()
and celsius_to_deci_kelvin() in <linux/units.h> instead of helpers in
<linux/thermal.h>.
This is preparation for centralizing the kelvin to/from Celsius
conversion helpers in <linux/units.h>.
This also removes a trailing space, while we're at it.
Link: http://lkml.kernel.org/r/1576386975-7941-5-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The asus-wmi driver doesn't implement the thermal device functionality
directly, so including <linux/thermal.h> just for
DECI_KELVIN_TO_CELSIUS() is a bit odd.
This switches the asus-wmi driver to use deci_kelvin_to_millicelsius()
in <linux/units.h>.
The format string is changed from %d to %ld due to function returned
type.
Link: http://lkml.kernel.org/r/1576386975-7941-4-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This switches the ACPI thermal zone driver to use
celsius_to_deci_kelvin(), deci_kelvin_to_celsius(), and
deci_kelvin_to_millicelsius_with_offset() in <linux/units.h> instead of
helpers in <linux/thermal.h>.
This is preparation for centralizing the kelvin to/from Celsius
conversion helpers in <linux/units.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-3-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "add header file for kelvin to/from Celsius conversion
helpers", v4.
There are several helper macros to convert kelvin to/from Celsius in
<linux/thermal.h> for thermal drivers. These are useful for any other
drivers or subsystems, but it's odd to include <linux/thermal.h> just
for the helpers.
This adds a new <linux/units.h> that provides the equivalent inline
functions for any drivers or subsystems, and switches all the users of
conversion helpers in <linux/thermal.h> to use <linux/units.h> helpers.
This patch (of 12):
There are several helper macros to convert kelvin to/from Celsius in
<linux/thermal.h> for thermal drivers. These are useful for any other
drivers or subsystems, but it's odd to include <linux/thermal.h> just
for the helpers.
This adds a new <linux/units.h> that provides the equivalent inline
functions for any drivers or subsystems. It is intended to replace the
helpers in <linux/thermal.h>.
Link: http://lkml.kernel.org/r/1576386975-7941-2-git-send-email-akinobu.mita@gmail.com
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sujith Thomas <sujith.thomas@intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Amit Kucheria <amit.kucheria@verdurent.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Cc: Luca Coelho <luciano.coelho@intel.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently when an error code -EIO or -ENOSPC in the for-loop of
writeback_store the error code is being overwritten by a ret = len
assignment at the end of the function and the error codes are being
lost. Fix this by assigning ret = len at the start of the function and
remove the assignment from the end, hence allowing ret to be preserved
when error codes are assigned to it.
Addresses Coverity ("Unused value")
Link: http://lkml.kernel.org/r/20191128122958.178290-1-colin.king@canonical.com
Fixes: a939888ec3 ("zram: support idle/huge page writeback")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The worst-case scenario on finding same element pages is that almost all
elements are same at the first glance but only last few elements are
different.
Since the same element tends to be grouped from the beginning of the
pages, if we check the first element with the last element before
looping through all elements, we might have some chances to quickly
detect non-same element pages.
1. Test is done under LG webOS TV (64-bit arch)
2. Dump the swap-out pages (~819200 pages)
3. Analyze the pages with simple test script which counts the iteration
number and measures the speed at off-line
Under 64-bit arch, the worst iteration count is PAGE_SIZE / 8 bytes =
512. The speed is based on the time to consume page_same_filled()
function only. The result, on average, is listed as below:
Num of Iter Speed(MB/s)
Looping-Forward (Orig) 38 99265
Looping-Backward 36 102725
Last-element-check (This Patch) 33 125072
The result shows that the average iteration count decreases by 13% and
the speed increases by 25% with this patch. This patch does not
increase the overall time complexity, though.
I also ran simpler version which uses backward loop. Just looping
backward also makes some improvement, but less than this patch.
[taejoon.song@lge.com: fix off-by-one]
Link: http://lkml.kernel.org/r/1578642001-11765-1-git-send-email-taejoon.song@lge.com
Link: http://lkml.kernel.org/r/1575424418-16119-1-git-send-email-taejoon.song@lge.com
Signed-off-by: Taejoon Song <taejoon.song@lge.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As zone reclaim has been replaced by node reclaim, this patch fixes
related comments.
Link: http://lkml.kernel.org/r/20191126141346.GA22665@haolee.github.io
Signed-off-by: Hao Lee <haolee.swjtu@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
memory_block structure elements 'hw' and 'phys_callback' are not getting
used. This was originally added with commit 3947be1969 ("[PATCH]
memory hotplug: sysfs and add/remove functions") but never seem to have
been used. Just drop them now.
Link: http://lkml.kernel.org/r/1576728650-13867-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
totalram_pages_set() was introduced in commit ca79b0c211 ("mm: convert
totalram_pages and totalhigh_pages variables to atomic"), but no one
uses it.
Link: http://lkml.kernel.org/r/20191218005543.24146-1-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The check was intended to make sure we don't overrun page flags. But
it's obsolete because it doesn't include LAST_CPUPID_WIDTH nor
KASAN_TAG_WIDTH.
Just remove check since we already have it covered in
linux/page-flags-layout.h (near the end of the file).
Link: http://lkml.kernel.org/r/20191208183508.89177-1-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The "pool" pointer can be NULL at the end of the init_zswap(). (We
would allocate a new pool later in that situation)
So in the error handling then we need to make sure pool is a valid
pointer before calling "zswap_pool_destroy(pool);" because that function
dereferences the argument.
Link: http://lkml.kernel.org/r/20200114050902.og32fkllkod5ycf5@kili.mountain
Fixes: 93d4dfa9fbd0 ("mm/zswap.c: add allocation hysteresis if pool limit is hit")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zswap will always try to shrink pool when zswap is full. If there is a
high pressure on zswap it will result in flipping pages in and out zswap
pool without any real benefit, and the overall system performance will
drop. The previous discussion on this subject [1] ended up with a
suggestion to implement a sort of hysteresis to refuse taking pages into
zswap pool until it has sufficient space if the limit has been hit.
This is my take on this.
Hysteresis is controlled with a sysfs-configurable parameter (namely,
/sys/kernel/debug/zswap/accept_threhsold_percent). It specifies the
threshold at which zswap would start accepting pages again after it
became full. Setting this parameter to 100 disables the hysteresis and
sets the zswap behavior to pre-hysteresis state.
[1] https://lkml.org/lkml/2019/11/8/949
Link: http://lkml.kernel.org/r/20200108200118.15563-1-vitaly.wool@konsulko.com
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It makes sense to call the WARN_ON_ONCE(zone_idx(zone) == ZONE_MOVABLE)
from start_isolate_page_range(), but should avoid triggering it from
userspace, i.e, from is_mem_section_removable() because it could crash
the system by a non-root user if warn_on_panic is set.
While at it, simplify the code a bit by removing an unnecessary jump
label.
Link: http://lkml.kernel.org/r/20200120163915.1469-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Suggested-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is not that hard to trigger lockdep splats by calling printk from
under zone->lock. Most of them are false positives caused by lock
chains introduced early in the boot process and they do not cause any
real problems (although most of the early boot lock dependencies could
happen after boot as well). There are some console drivers which do
allocate from the printk context as well and those should be fixed. In
any case, false positives are not that trivial to workaround and it is
far from optimal to lose lockdep functionality for something that is a
non-issue.
So change has_unmovable_pages() so that it no longer calls dump_page()
itself - instead it returns a "struct page *" of the unmovable page back
to the caller so that in the case of a has_unmovable_pages() failure,
the caller can call dump_page() after releasing zone->lock. Also, make
dump_page() is able to report a CMA page as well, so the reason string
from has_unmovable_pages() can be removed.
Even though has_unmovable_pages doesn't hold any reference to the
returned page this should be reasonably safe for the purpose of
reporting the page (dump_page) because it cannot be hotremoved in the
context of memory unplug. The state of the page might change but that
is the case even with the existing code as zone->lock only plays role
for free pages.
While at it, remove a similar but unnecessary debug-only printk() as
well. A sample of one of those lockdep splats is,
WARNING: possible circular locking dependency detected
------------------------------------------------------
test.sh/8653 is trying to acquire lock:
ffffffff865a4460 (console_owner){-.-.}, at:
console_unlock+0x207/0x750
but task is already holding lock:
ffff88883fff3c58 (&(&zone->lock)->rlock){-.-.}, at:
__offline_isolated_pages+0x179/0x3e0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&(&zone->lock)->rlock){-.-.}:
__lock_acquire+0x5b3/0xb40
lock_acquire+0x126/0x280
_raw_spin_lock+0x2f/0x40
rmqueue_bulk.constprop.21+0xb6/0x1160
get_page_from_freelist+0x898/0x22c0
__alloc_pages_nodemask+0x2f3/0x1cd0
alloc_pages_current+0x9c/0x110
allocate_slab+0x4c6/0x19c0
new_slab+0x46/0x70
___slab_alloc+0x58b/0x960
__slab_alloc+0x43/0x70
__kmalloc+0x3ad/0x4b0
__tty_buffer_request_room+0x100/0x250
tty_insert_flip_string_fixed_flag+0x67/0x110
pty_write+0xa2/0xf0
n_tty_write+0x36b/0x7b0
tty_write+0x284/0x4c0
__vfs_write+0x50/0xa0
vfs_write+0x105/0x290
redirected_tty_write+0x6a/0xc0
do_iter_write+0x248/0x2a0
vfs_writev+0x106/0x1e0
do_writev+0xd4/0x180
__x64_sys_writev+0x45/0x50
do_syscall_64+0xcc/0x76c
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #2 (&(&port->lock)->rlock){-.-.}:
__lock_acquire+0x5b3/0xb40
lock_acquire+0x126/0x280
_raw_spin_lock_irqsave+0x3a/0x50
tty_port_tty_get+0x20/0x60
tty_port_default_wakeup+0xf/0x30
tty_port_tty_wakeup+0x39/0x40
uart_write_wakeup+0x2a/0x40
serial8250_tx_chars+0x22e/0x440
serial8250_handle_irq.part.8+0x14a/0x170
serial8250_default_handle_irq+0x5c/0x90
serial8250_interrupt+0xa6/0x130
__handle_irq_event_percpu+0x78/0x4f0
handle_irq_event_percpu+0x70/0x100
handle_irq_event+0x5a/0x8b
handle_edge_irq+0x117/0x370
do_IRQ+0x9e/0x1e0
ret_from_intr+0x0/0x2a
cpuidle_enter_state+0x156/0x8e0
cpuidle_enter+0x41/0x70
call_cpuidle+0x5e/0x90
do_idle+0x333/0x370
cpu_startup_entry+0x1d/0x1f
start_secondary+0x290/0x330
secondary_startup_64+0xb6/0xc0
-> #1 (&port_lock_key){-.-.}:
__lock_acquire+0x5b3/0xb40
lock_acquire+0x126/0x280
_raw_spin_lock_irqsave+0x3a/0x50
serial8250_console_write+0x3e4/0x450
univ8250_console_write+0x4b/0x60
console_unlock+0x501/0x750
vprintk_emit+0x10d/0x340
vprintk_default+0x1f/0x30
vprintk_func+0x44/0xd4
printk+0x9f/0xc5
-> #0 (console_owner){-.-.}:
check_prev_add+0x107/0xea0
validate_chain+0x8fc/0x1200
__lock_acquire+0x5b3/0xb40
lock_acquire+0x126/0x280
console_unlock+0x269/0x750
vprintk_emit+0x10d/0x340
vprintk_default+0x1f/0x30
vprintk_func+0x44/0xd4
printk+0x9f/0xc5
__offline_isolated_pages.cold.52+0x2f/0x30a
offline_isolated_pages_cb+0x17/0x30
walk_system_ram_range+0xda/0x160
__offline_pages+0x79c/0xa10
offline_pages+0x11/0x20
memory_subsys_offline+0x7e/0xc0
device_offline+0xd5/0x110
state_store+0xc6/0xe0
dev_attr_store+0x3f/0x60
sysfs_kf_write+0x89/0xb0
kernfs_fop_write+0x188/0x240
__vfs_write+0x50/0xa0
vfs_write+0x105/0x290
ksys_write+0xc6/0x160
__x64_sys_write+0x43/0x50
do_syscall_64+0xcc/0x76c
entry_SYSCALL_64_after_hwframe+0x49/0xbe
other info that might help us debug this:
Chain exists of:
console_owner --> &(&port->lock)->rlock --> &(&zone->lock)->rlock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&(&zone->lock)->rlock);
lock(&(&port->lock)->rlock);
lock(&(&zone->lock)->rlock);
lock(console_owner);
*** DEADLOCK ***
9 locks held by test.sh/8653:
#0: ffff88839ba7d408 (sb_writers#4){.+.+}, at:
vfs_write+0x25f/0x290
#1: ffff888277618880 (&of->mutex){+.+.}, at:
kernfs_fop_write+0x128/0x240
#2: ffff8898131fc218 (kn->count#115){.+.+}, at:
kernfs_fop_write+0x138/0x240
#3: ffffffff86962a80 (device_hotplug_lock){+.+.}, at:
lock_device_hotplug_sysfs+0x16/0x50
#4: ffff8884374f4990 (&dev->mutex){....}, at:
device_offline+0x70/0x110
#5: ffffffff86515250 (cpu_hotplug_lock.rw_sem){++++}, at:
__offline_pages+0xbf/0xa10
#6: ffffffff867405f0 (mem_hotplug_lock.rw_sem){++++}, at:
percpu_down_write+0x87/0x2f0
#7: ffff88883fff3c58 (&(&zone->lock)->rlock){-.-.}, at:
__offline_isolated_pages+0x179/0x3e0
#8: ffffffff865a4920 (console_lock){+.+.}, at:
vprintk_emit+0x100/0x340
stack backtrace:
Hardware name: HPE ProLiant DL560 Gen10/ProLiant DL560 Gen10,
BIOS U34 05/21/2019
Call Trace:
dump_stack+0x86/0xca
print_circular_bug.cold.31+0x243/0x26e
check_noncircular+0x29e/0x2e0
check_prev_add+0x107/0xea0
validate_chain+0x8fc/0x1200
__lock_acquire+0x5b3/0xb40
lock_acquire+0x126/0x280
console_unlock+0x269/0x750
vprintk_emit+0x10d/0x340
vprintk_default+0x1f/0x30
vprintk_func+0x44/0xd4
printk+0x9f/0xc5
__offline_isolated_pages.cold.52+0x2f/0x30a
offline_isolated_pages_cb+0x17/0x30
walk_system_ram_range+0xda/0x160
__offline_pages+0x79c/0xa10
offline_pages+0x11/0x20
memory_subsys_offline+0x7e/0xc0
device_offline+0xd5/0x110
state_store+0xc6/0xe0
dev_attr_store+0x3f/0x60
sysfs_kf_write+0x89/0xb0
kernfs_fop_write+0x188/0x240
__vfs_write+0x50/0xa0
vfs_write+0x105/0x290
ksys_write+0xc6/0x160
__x64_sys_write+0x43/0x50
do_syscall_64+0xcc/0x76c
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Link: http://lkml.kernel.org/r/20200117181200.20299-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm/memory_hotplug: pass in nid to online_pages()".
Simplify onlining code and get rid of find_memory_block(). Pass in the
nid from the memory block we are trying to online directly, instead of
manually looking it up.
This patch (of 2):
No need to lookup the memory block, we can directly pass in the nid.
Link: http://lkml.kernel.org/r/20200113113354.6341-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The jump labels try_prev and none are not really needed in
find_mergeable_anon_vma(), eliminate them to improve readability.
Link: http://lkml.kernel.org/r/1574079844-17493-1-git-send-email-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If thp defrag setting "defer" is used and a newline is *not* used when
writing to the sysfs file, this is interpreted as the "defer+madvise"
option.
This is because we do prefix matching and if five characters are written
without a newline, the current code ends up comparing to the first five
bytes of the "defer+madvise" option and using that instead.
Use the more appropriate sysfs_streq() that handles the trailing newline
for us. Since this doubles as a nice cleanup, do it in enabled_store()
as well.
The current implementation relies on prefix matching: the number of
bytes compared is either the number of bytes written or the length of
the option being compared. With a newline, "defer\n" does not match
"defer+"madvise"; without a newline, however, "defer" is considered to
match "defer+madvise" (prefix matching is only comparing the first five
bytes). End result is that writing "defer" is broken unless it has an
additional trailing character.
This means that writing "madv" in the past would match and set
"madvise". With strict checking, that no longer is the case but it is
unlikely anybody is currently doing this.
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2001171411020.56385@chino.kir.corp.google.com
Fixes: 21440d7eb9 ("mm, thp: add new defer+madvise defrag option")
Signed-off-by: David Rientjes <rientjes@google.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
migrate_vma_insert_page() closely follows the code in:
__handle_mm_fault()
handle_pte_fault()
do_anonymous_page()
Add a call to check_stable_address_space() after locking the page table
entry before inserting a ZONE_DEVICE private zero page mapping similar
to page faulting a new anonymous page.
Link: http://lkml.kernel.org/r/20200107211208.24595-4-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix some comment typos and coding style clean up in preparation for the
next patch. No functional changes.
Link: http://lkml.kernel.org/r/20200107211208.24595-3-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Acked-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Addresses passed to walk_page_range() callback functions are already
page aligned and don't need to be masked with PAGE_MASK.
Link: http://lkml.kernel.org/r/20200107211208.24595-2-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
split_queue_lock protects data in struct deferred_split. We can release
the lock after delete the page from deferred_split_queue.
This patch moves the THP accounting out of the lock protection, which is
introduced in commit 65c453778a ("mm, rmap: account shmem thp pages").
Link: http://lkml.kernel.org/r/20200110025516.23996-1-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During split huge page, it checks the property of the page. Currently
we do the check on page and head without emphasizing the check is on the
compound page. In case the page passed to split_huge_page_to_list is a
tail page, audience would take some time to think about whether the
check is on compound page or tail page itself.
To make it explicit, use head instead of page for those checks. After
this, audience would be more clear about the checks are on compound page
and the page is used to do the split and dump error message if failed.
Link: http://lkml.kernel.org/r/20200110032610.26499-2-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page could be a tail page, if this is the case, this BUG_ON will
never be triggered.
Link: http://lkml.kernel.org/r/20200110032610.26499-1-richardw.yang@linux.intel.com
Fixes: e9b61f1985 ("thp: reintroduce split_huge_page()")
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a process cannot be oom reaped, for whatever reason, currently the
list of locks that are held is currently dumped to the kernel log.
Much more interesting is the stack trace of the victim that cannot be
reaped. If the stack trace is dumped, we have the ability to find
related occurrences in the same kernel code and hopefully solve the
issue that is making it wedged.
Dump the stack trace when a process fails to be oom reaped.
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.2001141519280.200484@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace open function name strings with %s (__func__) in all remaining
memblock_dbg() call sites.
Link: http://lkml.kernel.org/r/1578285510-28261-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
