PTRACE_GET_SYSCALL_INFO is a generic ptrace API that lets ptracer obtain
details of the syscall the tracee is blocked in.
There are two reasons for a special syscall-related ptrace request.
Firstly, with the current ptrace API there are cases when ptracer cannot
retrieve necessary information about syscalls. Some examples include:
* The notorious int-0x80-from-64-bit-task issue. See [1] for details.
In short, if a 64-bit task performs a syscall through int 0x80, its
tracer has no reliable means to find out that the syscall was, in
fact, a compat syscall, and misidentifies it.
* Syscall-enter-stop and syscall-exit-stop look the same for the
tracer. Common practice is to keep track of the sequence of
ptrace-stops in order not to mix the two syscall-stops up. But it is
not as simple as it looks; for example, strace had a (just recently
fixed) long-standing bug where attaching strace to a tracee that is
performing the execve system call led to the tracer identifying the
following syscall-exit-stop as syscall-enter-stop, which messed up
all the state tracking.
* Since the introduction of commit 84d77d3f06 ("ptrace: Don't allow
accessing an undumpable mm"), both PTRACE_PEEKDATA and
process_vm_readv become unavailable when the process dumpable flag is
cleared. On such architectures as ia64 this results in all syscall
arguments being unavailable for the tracer.
Secondly, ptracers also have to support a lot of arch-specific code for
obtaining information about the tracee. For some architectures, this
requires a ptrace(PTRACE_PEEKUSER, ...) invocation for every syscall
argument and return value.
ptrace(2) man page:
long ptrace(enum __ptrace_request request, pid_t pid,
void *addr, void *data);
...
PTRACE_GET_SYSCALL_INFO
Retrieve information about the syscall that caused the stop.
The information is placed into the buffer pointed by "data"
argument, which should be a pointer to a buffer of type
"struct ptrace_syscall_info".
The "addr" argument contains the size of the buffer pointed to
by "data" argument (i.e., sizeof(struct ptrace_syscall_info)).
The return value contains the number of bytes available
to be written by the kernel.
If the size of data to be written by the kernel exceeds the size
specified by "addr" argument, the output is truncated.
[ldv@altlinux.org: selftests/seccomp/seccomp_bpf: update for PTRACE_GET_SYSCALL_INFO]
Link: http://lkml.kernel.org/r/20190708182904.GA12332@altlinux.org
Link: http://lkml.kernel.org/r/20190510152842.GF28558@altlinux.org
Signed-off-by: Elvira Khabirova <lineprinter@altlinux.org>
Co-developed-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: Eugene Syromyatnikov <esyr@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Helge Deller <deller@gmx.de> [parisc]
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: kbuild test robot <lkp@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Chen <deanbo422@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Based on 1 normalized pattern(s):
use of this source code is governed by the gplv2 license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 2 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081204.507272547@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This Kselftest update for Linux 5.2-rc1 consists of
- fixes to seccomp test, and kselftest framework
- cleanups to remove duplicate header defines
- fixes to efivarfs "make clean" target
- cgroup cleanup path
- Moving the IMA kexec_load selftest to selftests/kexec work from
Mimi Johar and Petr Vorel
- A framework to kselftest for writing kernel test modules addition
from Tobin C. Harding
-----BEGIN PGP SIGNATURE-----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=pNRO
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
- fixes to seccomp test, and kselftest framework
- cleanups to remove duplicate header defines
- fixes to efivarfs "make clean" target
- cgroup cleanup path
- Moving the IMA kexec_load selftest to selftests/kexec work from Mimi
Johar and Petr Vorel
- A framework to kselftest for writing kernel test modules addition
from Tobin C. Harding
* tag 'linux-kselftest-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits)
selftests: build and run gpio when output directory is the src dir
selftests/ipc: Fix msgque compiler warnings
selftests/efivarfs: clean up test files from test_create*()
selftests: fix headers_install circular dependency
selftests/kexec: update get_secureboot_mode
selftests/kexec: make kexec_load test independent of IMA being enabled
selftests/kexec: check kexec_load and kexec_file_load are enabled
selftests/kexec: Add missing '=y' to config options
selftests/kexec: kexec_file_load syscall test
selftests/kexec: define "require_root_privileges"
selftests/kexec: define common logging functions
selftests/kexec: define a set of common functions
selftests/kexec: cleanup the kexec selftest
selftests/kexec: move the IMA kexec_load selftest to selftests/kexec
selftests/harness: Add 30 second timeout per test
selftests/seccomp: Handle namespace failures gracefully
selftests: cgroup: fix cleanup path in test_memcg_subtree_control()
selftests: efivarfs: remove the test_create_read file if it was exist
rseq/selftests: Adapt number of threads to the number of detected cpus
lib: Add test module for strscpy_pad
...
Some seccomp flags will become exclusive, so the selftest needs to
be adjusted to mask those out and test them individually for the "all
flags" tests.
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: James Morris <jamorris@linux.microsoft.com>
When running without USERNS or PIDNS the seccomp test would hang since
it was waiting forever for the child to trigger the user notification
since it seems the glibc() abort handler makes a call to getpid(),
which would trap again. This changes the getpid filter to getppid, and
makes sure ASSERTs execute to stop from spawning the listener.
Reported-by: Shuah Khan <shuah@kernel.org>
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org # > 5.0
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Clang noticed that some none-zero sleep()s were actually using zero
anyway. This switches to nanosleep() to gain sub-second granularity.
seccomp_bpf.c:2625:9: warning: implicit conversion from 'double' to
'unsigned int' changes value from 0.1 to 0 [-Wliteral-conversion]
sleep(0.1);
~~~~~ ^~~
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
The pid ns cannot be unshare()d as an unprivileged user without owning the
userns as well. Let's unshare the userns so that we can subsequently
unshare the pidns.
This also means that we don't need to set the no new privs bit as in the
other test cases, since we're unsharing the userns.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
seccomp() doesn't allow users who aren't root in their userns to attach
filters unless they have the nnp bit set, so let's set it so that these
tests can pass when run as an unprivileged user.
This idea stolen from the other seccomp tests, which use this trick :)
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
The get_metadata() test requires real root, so let's skip it if we're not
real root.
Note that I used XFAIL here because that's what the test does later if
CONFIG_CHEKCKPOINT_RESTORE happens to not be enabled. After looking at the
code, there doesn't seem to be a nice way to skip tests defined as TEST(),
since there's no return code (I tried exit(KSFT_SKIP), but that didn't work
either...). So let's do it this way to be consistent, and easier to fix
when someone comes along and fixes it.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
There used to be an explanation here because it could trigger lockdep
previously, but now we're not doing recursive locking, so it really is just
for grins.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
This this test forks a child, and then the parent waits for a write() to a
pipe signalling the child is ready to be attached to. If something in the
child ASSERTs before it does this write, the test will hang waiting for it.
Instead, let's EXPECT, so that execution continues until we do the write.
Any failure after that is fine and can ASSERT.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Passing EPERM during syscall skipping was confusing since the test wasn't
actually exercising the errno evaluation -- it was just passing a literal
"1" (EPERM). Instead, expand the tests to check both direct value returns
(positive, 45000 in this case), and errno values (negative, -ESRCH in this
case) to check both fake success and fake failure during syscall skipping.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: a33b2d0359 ("selftests/seccomp: Add tests for basic ptrace actions")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
In the face of missing user notification support, the self test needs
to stop executing a test (ASSERT_*) instead of just reporting and
continuing (EXPECT_*). This adjusts the user notification tests to do
that where needed.
Reported-by: Shuah Khan <shuah@kernel.org>
Fixes: 6a21cc50f0 ("seccomp: add a return code to trap to userspace")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tycho Andersen <tycho@tycho.ws>
Tested-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
seccomp_bpf fails to build due to undefined reference errors:
aarch64-linaro-linux-gcc --sysroot=/build/tmp-rpb-glibc/sysroots/hikey
-O2 -pipe -g -feliminate-unused-debug-types -Wl,-no-as-needed -Wall
-Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -lpthread seccomp_bpf.c -o
/build/tmp-rpb-glibc/work/hikey-linaro-linux/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf
/tmp/ccrlR3MW.o: In function `tsync_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1920: undefined reference to `sem_post'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1920: undefined reference to `sem_post'
/tmp/ccrlR3MW.o: In function `TSYNC_setup':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1863: undefined reference to `sem_init'
/tmp/ccrlR3MW.o: In function `TSYNC_teardown':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1904: undefined reference to `sem_destroy'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1897: undefined reference to `pthread_kill'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1898: undefined reference to `pthread_cancel'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1899: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/tmp/ccrlR3MW.o: In function `TSYNC_siblings_fail_prctl':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1978: undefined reference to `sem_wait'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1990: undefined reference to `pthread_join'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1992: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_ancestor':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2016: undefined reference to `sem_wait'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2032: undefined reference to `pthread_join'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2034: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/tmp/ccrlR3MW.o: In function `TSYNC_two_sibling_want_nnp':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2046: undefined reference to `sem_wait'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2058: undefined reference to `pthread_join'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2060: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_no_filter':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2073: undefined reference to `sem_wait'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2098: undefined reference to `pthread_join'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2100: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_with_one_divergence':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2125: undefined reference to `sem_wait'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2143: undefined reference to `pthread_join'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2145: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
/tmp/ccrlR3MW.o: In function `TSYNC_two_siblings_not_under_filter':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2169: undefined reference to `sem_wait'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2202: undefined reference to `pthread_join'
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:2227: undefined reference to `pthread_join'
/tmp/ccrlR3MW.o: In function `tsync_start_sibling':
/usr/src/debug/kselftests/4.12-r0/linux-4.12-rc7/tools/testing/selftests/seccomp/seccomp_bpf.c:1941: undefined reference to `pthread_create'
It's GNU Make and linker specific.
The default Makefile rule looks like:
$(CC) $(CFLAGS) $(LDFLAGS) $@ $^ $(LDLIBS)
When linking is done by gcc itself, no issue, but when it needs to be passed
to proper ld, only LDLIBS follows and then ld cannot know what libs to link
with.
More detail:
https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker,
‘ld’, such as -L. Libraries (-lfoo) should be added to the LDLIBS variable
instead.
LDLIBS
Library flags or names given to compilers when they are supposed to invoke the
linker, ‘ld’. LOADLIBES is a deprecated (but still supported) alternative to
LDLIBS. Non-library linker flags, such as -L, should go in the LDFLAGS
variable.
https://lkml.org/lkml/2010/2/10/362
tools/perf: libraries must come after objects
Link order matters, use LDLIBS instead of LDFLAGS to properly link against
libpthread.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Pull seccomp updates from James Morris:
- Add SECCOMP_RET_USER_NOTIF
- seccomp fixes for sparse warnings and s390 build (Tycho)
* 'next-seccomp' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
seccomp, s390: fix build for syscall type change
seccomp: fix poor type promotion
samples: add an example of seccomp user trap
seccomp: add a return code to trap to userspace
seccomp: switch system call argument type to void *
seccomp: hoist struct seccomp_data recalculation higher
Commit f149b31557 ("signal: Never allocate siginfo for SIGKILL or SIGSTOP")
means that the seccomp selftest cannot check si_pid under SIGSTOP anymore.
Since it's believed[1] there are no other userspace things depending on the
old behavior, this removes the behavioral check in the selftest, since it's
more a "extra" sanity check (which turns out, maybe, not to have been
useful to test).
[1] https://lkml.kernel.org/r/CAGXu5jJaZAOzP1qFz66tYrtbuywqb+UN2SOA1VLHpCCOiYvYeg@mail.gmail.com
Reported-by: Tycho Andersen <tycho@tycho.ws>
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
If a seccomp user is not interested in Speculative Store Bypass mitigation
by default, it can set the new SECCOMP_FILTER_FLAG_SPEC_ALLOW flag when
adding filters.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Since seccomp_get_metadata() depends on CHECKPOINT_RESTORE, XFAIL the
test if the ptrace reports it as missing.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Let's test that we get the flags correctly, and that we preserve the filter
index across the ptrace(PTRACE_SECCOMP_GET_METADATA) correctly.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
aarch64-linux-gnu-gcc -Wl,-no-as-needed -Wall
-lpthread seccomp_bpf.c -o seccomp_bpf
seccomp_bpf.c: In function 'tracer_ptrace':
seccomp_bpf.c:1720:12: error: '__NR_open' undeclared
(first use in this function)
if (nr == __NR_open)
^~~~~~~~~
seccomp_bpf.c:1720:12: note: each undeclared identifier is reported
only once for each function it appears in
In file included from seccomp_bpf.c:48:0:
seccomp_bpf.c: In function 'TRACE_syscall_ptrace_syscall_dropped':
seccomp_bpf.c:1795:39: error: '__NR_open' undeclared
(first use in this function)
EXPECT_SYSCALL_RETURN(EPERM, syscall(__NR_open));
^
open(2) is a legacy syscall, replaced with openat(2) since 2.6.16.
Thus new architectures in the kernel, such as arm64, don't implement
these legacy syscalls.
Fixes: a33b2d0359 ("selftests/seccomp: Add tests for basic ptrace
actions")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: stable@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This update consists of:
- fixes to several existing tests
- a test for regression introduced by
b9470c2760 ("inet: kill smallest_size and smallest_port")
- seccomp support for glibc 2.26 siginfo_t.h
- fixes to kselftest framework and tests to run make O=dir use-case
- fixes to silence unnecessary test output to de-clutter test results
-----BEGIN PGP SIGNATURE-----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=FUuY
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This update consists of:
- fixes to several existing tests
- a test for regression introduced by b9470c2760 ("inet: kill
smallest_size and smallest_port")
- seccomp support for glibc 2.26 siginfo_t.h
- fixes to kselftest framework and tests to run make O=dir use-case
- fixes to silence unnecessary test output to de-clutter test results"
* tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (28 commits)
selftests: timers: set-timer-lat: Fix hang when testing unsupported alarms
selftests: timers: set-timer-lat: fix hang when std out/err are redirected
selftests/memfd: correct run_tests.sh permission
selftests/seccomp: Support glibc 2.26 siginfo_t.h
selftests: futex: Makefile: fix for loops in targets to run silently
selftests: Makefile: fix for loops in targets to run silently
selftests: mqueue: Use full path to run tests from Makefile
selftests: futex: copy sub-dir test scripts for make O=dir run
selftests: lib.mk: copy test scripts and test files for make O=dir run
selftests: sync: kselftest and kselftest-clean fail for make O=dir case
selftests: sync: use TEST_CUSTOM_PROGS instead of TEST_PROGS
selftests: lib.mk: add TEST_CUSTOM_PROGS to allow custom test run/install
selftests: watchdog: fix to use TEST_GEN_PROGS and remove clean
selftests: lib.mk: fix test executable status check to use full path
selftests: Makefile: clear LDFLAGS for make O=dir use-case
selftests: lib.mk: kselftest and kselftest-clean fail for make O=dir case
Makefile: kselftest and kselftest-clean fail for make O=dir case
selftests/net: msg_zerocopy enable build with older kernel headers
selftests: actually run the various net selftests
selftest: add a reuseaddr test
...
The 2.26 release of glibc changed how siginfo_t is defined, and the earlier
work-around to using the kernel definition are no longer needed. The old
way needs to stay around for a while, though.
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
- sysctl and seccomp operation to discover available actions. (tyhicks)
- new per-filter configurable logging infrastructure and sysctl. (tyhicks)
- SECCOMP_RET_LOG to log allowed syscalls. (tyhicks)
- SECCOMP_RET_KILL_PROCESS as the new strictest possible action.
- self-tests for new behaviors.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Kees Cook <kees@outflux.net>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=sKeC
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
"Major additions:
- sysctl and seccomp operation to discover available actions
(tyhicks)
- new per-filter configurable logging infrastructure and sysctl
(tyhicks)
- SECCOMP_RET_LOG to log allowed syscalls (tyhicks)
- SECCOMP_RET_KILL_PROCESS as the new strictest possible action
- self-tests for new behaviors"
[ This is the seccomp part of the security pull request during the merge
window that was nixed due to unrelated problems - Linus ]
* tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
samples: Unrename SECCOMP_RET_KILL
selftests/seccomp: Test thread vs process killing
seccomp: Implement SECCOMP_RET_KILL_PROCESS action
seccomp: Introduce SECCOMP_RET_KILL_PROCESS
seccomp: Rename SECCOMP_RET_KILL to SECCOMP_RET_KILL_THREAD
seccomp: Action to log before allowing
seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
seccomp: Selftest for detection of filter flag support
seccomp: Sysctl to configure actions that are allowed to be logged
seccomp: Operation for checking if an action is available
seccomp: Sysctl to display available actions
seccomp: Provide matching filter for introspection
selftests/seccomp: Refactor RET_ERRNO tests
selftests/seccomp: Add simple seccomp overhead benchmark
selftests/seccomp: Add tests for basic ptrace actions
When a test process is not able to write to TH_LOG_STREAM, this step
mechanism enable to print the assert number which triggered the failure.
This can be enabled by setting _metadata->no_print to true at the
beginning of the test sequence.
Update the seccomp-bpf test to return 0 if a test succeeded.
This feature is needed for the Landlock tests.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Link: https://lkml.kernel.org/r/CAGXu5j+D-FP8Kt9unNOqKrQJP4DYTpmgkJxWykZyrYiVPz3Y3Q@mail.gmail.com
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This verifies that SECCOMP_RET_KILL_PROCESS is higher priority than
SECCOMP_RET_KILL_THREAD. (This also moves a bunch of defines up earlier
in the file to use them earlier.)
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
In preparation for adding SECCOMP_RET_KILL_PROCESS, rename SECCOMP_RET_KILL
to the more accurate SECCOMP_RET_KILL_THREAD.
The existing selftest values are intentionally left as SECCOMP_RET_KILL
just to be sure we're exercising the alias.
Signed-off-by: Kees Cook <keescook@chromium.org>
Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing
the syscall. At the implementation level, this action is identical to
the existing SECCOMP_RET_ALLOW action. However, it can be very useful when
initially developing a seccomp filter for an application. The developer
can set the default action to be SECCOMP_RET_LOG, maybe mark any
obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the
application through its paces. A list of syscalls that triggered the
default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and
that list can be used to build the syscall whitelist. Finally, the
developer can change the default action to the desired value.
This provides a more friendly experience than seeing the application get
killed, then updating the filter and rebuilding the app, seeing the
application get killed due to a different syscall, then updating the
filter and rebuilding the app, etc.
The functionality is similar to what's supported by the various LSMs.
SELinux has permissive mode, AppArmor has complain mode, SMACK has
bring-up mode, etc.
SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow
while logging is slightly more restrictive than quietly allowing.
Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of
inspecting the audit log to verify that the syscall was logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if action == RET_LOG && RET_LOG in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for
all actions except for SECCOMP_RET_ALLOW for the given filter.
SECCOMP_RET_KILL actions are always logged, when "kill" is in the
actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged,
regardless of this flag.
This flag can be used to create noisy filters that result in all
non-allowed actions to be logged. A process may have one noisy filter,
which is loaded with this flag, as well as a quiet filter that's not
loaded with this flag. This allows for the actions in a set of filters
to be selectively conveyed to the admin.
Since a system could have a large number of allocated seccomp_filter
structs, struct packing was taken in consideration. On 64 bit x86, the
new log member takes up one byte of an existing four byte hole in the
struct. On 32 bit x86, the new log member creates a new four byte hole
(unavoidable) and consumes one of those bytes.
Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not
capable of inspecting the audit log to verify that the actions taken in
the filter were logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Userspace needs to be able to reliably detect the support of a filter
flag. A good way of doing that is by attempting to enter filter mode,
with the flag bit(s) in question set, and a NULL pointer for the args
parameter of seccomp(2). EFAULT indicates that the flag is valid and
EINVAL indicates that the flag is invalid.
This patch adds a selftest that can be used to test this method of
detection in userspace.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Userspace code that needs to check if the kernel supports a given action
may not be able to use the /proc/sys/kernel/seccomp/actions_avail
sysctl. The process may be running in a sandbox and, therefore,
sufficient filesystem access may not be available. This patch adds an
operation to the seccomp(2) syscall that allows userspace code to ask
the kernel if a given action is available.
If the action is supported by the kernel, 0 is returned. If the action
is not supported by the kernel, -1 is returned with errno set to
-EOPNOTSUPP. If this check is attempted on a kernel that doesn't support
this new operation, -1 is returned with errno set to -EINVAL meaning
that userspace code will have the ability to differentiate between the
two error cases.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
This refactors the errno tests (since they all use the same pattern for
their filter) and adds a RET_DATA field ordering test.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
This attempts to produce a comparison between native getpid() and a
RET_ALLOW-filtered getpid(), to measure the overhead cost of using
seccomp().
Signed-off-by: Kees Cook <keescook@chromium.org>
This adds tests for using only ptrace to perform syscall changes, just
to validate matching behavior between seccomp events and ptrace events.
Signed-off-by: Kees Cook <keescook@chromium.org>
This update consists of:
-- TAP13 framework and changes to some tests to convert to TAP13.
Converting kselftest output to standard format will help identify
run to run differences and pin point failures easily. TAP13 format
has been in use for several years and the output is human friendly.
Please find the specification:
https://testanything.org/tap-version-13-specification.html
Credit goes to Tim Bird for recommending TAP13 as a suitable format,
and to Grag KH for kick starting the work with help from Paul Elder
and Alice Ferrazzi
The first phase of the TAp13 conversion is included in this update.
Future updates will include updates to rest of the tests.
-- Masami Hiramatsu fixed ftrace to run on 4.9 stable kernels.
-- Kselftest documnetation has been converted to ReST format. Document
now has a new home under Documentation/dev-tools.
-- kselftest_harness.h is now available for general use as a result of
Mickaël Salaün's work.
-- Several fixes to skip and/or fail tests gracefully on older releases.
-----BEGIN PGP SIGNATURE-----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=j1Um
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.13-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"This update consists of:
- TAP13 framework and changes to some tests to convert to TAP13.
Converting kselftest output to standard format will help identify
run to run differences and pin point failures easily. TAP13 format
has been in use for several years and the output is human friendly.
Please find the specification:
https://testanything.org/tap-version-13-specification.html
Credit goes to Tim Bird for recommending TAP13 as a suitable
format, and to Grag KH for kick starting the work with help from
Paul Elder and Alice Ferrazzi
The first phase of the TAp13 conversion is included in this update.
Future updates will include updates to rest of the tests.
- Masami Hiramatsu fixed ftrace to run on 4.9 stable kernels.
- Kselftest documnetation has been converted to ReST format. Document
now has a new home under Documentation/dev-tools.
- kselftest_harness.h is now available for general use as a result of
Mickaël Salaün's work.
- Several fixes to skip and/or fail tests gracefully on older
releases"
* tag 'linux-kselftest-4.13-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (48 commits)
selftests: membarrier: use ksft_* var arg msg api
selftests: breakpoints: breakpoint_test_arm64: convert test to use TAP13
selftests: breakpoints: step_after_suspend_test use ksft_* var arg msg api
selftests: breakpoint_test: use ksft_* var arg msg api
kselftest: add ksft_print_msg() function to output general information
kselftest: make ksft_* output functions variadic
selftests/capabilities: Fix the test_execve test
selftests: intel_pstate: add .gitignore
selftests: fix memory-hotplug test
selftests: add missing test name in memory-hotplug test
selftests: check percentage range for memory-hotplug test
selftests: check hot-pluggagble memory for memory-hotplug test
selftests: typo correction for memory-hotplug test
selftests: ftrace: Use md5sum to take less time of checking logs
tools/testing/selftests/sysctl: Add pre-check to the value of writes_strict
kselftest.rst: do some adjustments after ReST conversion
selftest/net/Makefile: Specify output with $(OUTPUT)
selftest/intel_pstate/aperf: Use LDLIBS instead of LDFLAGS
selftest/memfd/Makefile: Fix build error
selftests: lib: Skip tests on missing test modules
...
While glibc's pthread implementation is rather forgiving about repeat
thread joining, Bionic has recently become much more strict. To deal with
this, actually track which threads have been successfully joined and kill
the rest at teardown.
Based on a patch from Paul Lawrence.
Cc: Paul Lawrence <paullawrence@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Do not confuse the compiler with a semicolon preceding a block. Replace
the semicolon with an empty block to avoid a warning:
gcc -Wl,-no-as-needed -Wall -lpthread seccomp_bpf.c -o /.../linux/tools/testing/selftests/seccomp/seccomp_bpf
In file included from seccomp_bpf.c:40:0:
seccomp_bpf.c: In function ‘change_syscall’:
../kselftest_harness.h:558:2: warning: this ‘for’ clause does not guard... [-Wmisleading-indentation]
for (; _metadata->trigger; _metadata->trigger = __bail(_assert))
^
../kselftest_harness.h:574:14: note: in expansion of macro ‘OPTIONAL_HANDLER’
} while (0); OPTIONAL_HANDLER(_assert)
^~~~~~~~~~~~~~~~
../kselftest_harness.h:440:2: note: in expansion of macro ‘__EXPECT’
__EXPECT(expected, seen, ==, 0)
^~~~~~~~
seccomp_bpf.c:1313:2: note: in expansion of macro ‘EXPECT_EQ’
EXPECT_EQ(0, ret);
^~~~~~~~~
seccomp_bpf.c:1317:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘for’
{
^
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Will Drewry <wad@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The seccomp/test_harness.h file contains useful helpers to build tests.
Moving it to the selftest directory should benefit to other test
components.
Keep seccomp maintainers for this file.
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Will Drewry <wad@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Shuah Khan <shuah@kernel.org>
Link: https://lkml.kernel.org/r/CAGXu5j+8CVz8vL51DRYXqOY=xc3zuKFf=PTENe88XYHzFYidUQ@mail.gmail.com
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Currently, kselftest use TEST_PROGS, TEST_PROGS_EXTENDED, TEST_FILES to
indicate the test program, extended test program and test files. It is
easy to understand the purpose of these files. But mix of compiled and
uncompiled files lead to duplicated "all" and "clean" targets.
In order to remove the duplicated targets, introduce TEST_GEN_PROGS,
TEST_GEN_PROGS_EXTENDED, TEST_GEN_FILES to indicate the compiled
objects.
Also, the later patch will make use of TEST_GEN_XXX to redirect these
files to output directory indicated by KBUILD_OUTPUT or O.
And add this changes to "Contributing new tests(details)" of
Documentation/kselftest.txt.
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
One problem with seccomp was that ptrace could be used to change a
syscall after seccomp filtering had completed. This was a well documented
limitation, and it was recommended to block ptrace when defining a filter
to avoid this problem. This can be quite a limitation for containers or
other places where ptrace is desired even under seccomp filters.
This adds tests for both SECCOMP_RET_TRACE and PTRACE_SYSCALL manipulations.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>
By adding TRACEHOOK support we now get a clean user interface to access
registers via PTRACE_GETREGS, PTRACE_SETREGS, PTRACE_GETFPREGS and
PTRACE_SETFPREGS.
The user-visible regset struct user_regs_struct and user_fp_struct are
modelled similiar to x86 and can be accessed via PTRACE_GETREGSET.
Signed-off-by: Helge Deller <deller@gmx.de>
This adds self-test support on MIPS, based on RFC patch from Kees Cook.
Modifications from the RFC:
- support the O32 syscall which passes the real syscall number in a0.
- Use PTRACE_{GET,SET}REGS
- Because SYSCALL_NUM and SYSCALL_RET are the same register, it is not
possible to test modifying the syscall return value when skipping,
since both would need to set the same register. Therefore modify that
test case to just detect the skipped test.
Tested on MIPS32r2 / MIPS64r2 with O32, N32 and N64 userlands.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Will Drewry <wad@chromium.org>
Cc: IMG-MIPSLinuxKerneldevelopers@imgtec.com
Cc: linux-kernel@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12977/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Create the config file in each directory of testcase which need
more kernel configuration than the default defconfig. User could
use these configs with merge_config.sh script:
Enable config for specific testcase:
(export ARCH=xxx #for cross compiling)
./scripts/kconfig/merge_config.sh .config \
tools/testing/selftests/xxx/config
Enable configs for all testcases:
(export ARCH=xxx #for cross compiling)
./scripts/kconfig/merge_config.sh .config \
tools/testing/selftests/*/config
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Reviewed-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This 14 patch update:
- adds a new test for intel_pstate driver
- adds empty string and async test cases to
firmware class tests
- fixes and cleans up several existing tests
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Vt32
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"This 14 patch update:
- adds a new test for intel_pstate driver
- adds empty string and async test cases to firmware class tests
- fixes and cleans up several existing tests"
* tag 'linux-kselftest-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: firmware: add empty string and async tests
firmware: actually return NULL on failed request_firmware_nowait()
test: firmware_class: add asynchronous request trigger
test: firmware_class: use kstrndup() where appropriate
test: firmware_class: report errors properly on failure
selftests/seccomp: fix 32-bit build warnings
add breakpoints/.gitignore
add ptrace/.gitignore
update .gitignore in selftests/timers
update .gitignore in selftests/vm
tools, testing, add test for intel_pstate driver
selftest/ipc: actually test it
selftests/capabilities: actually test it
selftests/capabilities: clean up for Makefile
