Commit Graph

45274 Commits

Author SHA1 Message Date
David Daney
1ef2887030 MIPS: Octeon: Remove vestiges of CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
The config option CAVIUM_RESERVE32_USE_WIRED_TLB is not supported.
Remove the dead code controlled by it.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1028/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:09 +01:00
Ralf Baechle
1874a08860 MIPS: Cavium: Remove unused watchdog code.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12 17:26:08 +01:00
Ralf Baechle
c948aca4f4 MIPS: Fix build breakage if CONFIG_DEBUG_FS is enabled.
Caused by 38b7827fcd - no, cpu_local_* was
not unused.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Acked-by: David Daney <ddaney@caviumnetworks.com>
2010-04-12 17:26:08 +01:00
Russell King
85b3cce880 ARM: Fix ioremap_cached()/ioremap_wc() for SMP platforms
Write combining/cached device mappings are not setting the shared bit,
which could potentially cause problems on SMP systems since the cache
lines won't participate in the cache coherency protocol.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-04-09 15:00:11 +01:00
Martin Schwidefsky
8e7fcccee9 [S390] Update default configuration.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-04-09 13:43:02 +02:00
Heiko Carstens
187644636e [S390] nss: add missing .previous statement to asm function
The savesys_ipl_nss asm function is put into the .init.text section
however it is missing a ".previous" section which would restore the
previous section.
Luckily all functions in early.c are init functions so it doesn't
matter currently.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-04-09 13:43:02 +02:00
Martin Schwidefsky
7d3f661e57 [S390] increase default size of vmalloc area
The default size of the vmalloc area is currently 1 GB. The memory resource
controller uses about 10 MB of vmalloc space per gigabyte of memory. That
turns a system with more than ~100 GB memory unbootable with the default
vmalloc size. It costs us nothing to increase the default size to some
more adequate value, e.g. 128 GB.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-04-09 13:43:02 +02:00
Christian Borntraeger
6af7eea2ae [S390] s390: disable change bit override
commit 6a985c6194
([S390] s390: use change recording override for kernel mapping)
deactivated the change bit recording for the kernel mapping to
improve the performance. This works most of the time, but there
are cases (e.g. kernel runs in home space, futex atomic compare xcmg)
where we modify user memory with the kernel mapping instead of the
user mapping.
Instead of fixing these cases, this patch just deactivates change bit
override to avoid future problems with other kernel code that might
use the kernel mapping for user memory.

CC: stable@kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-04-09 13:43:02 +02:00
Martin Schwidefsky
176b1803ce [S390] fix io_return critical section cleanup
If a machine check interrupts the io interrupt handler on one of the
instructions between io_return and io_leave the critical section
cleanup code will move the return psw to io_work_loop. By doing that
the switch from the asynchronous interrupt stack to the process stack
is skipped. If e.g. TIF_NEED_RESCHED is set things break because
the scheduler is called with the asynchronous interrupts stack.
Moving the psw back to io_return instead fixes the problem.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-04-09 13:43:02 +02:00
Julia Lawall
d7015c120e [S390] arch/s390/kernel: Add missing unlock
In the default case the lock is not unlocked.  The return is
converted to a goto, to share the unlock at the end of the function.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression E1;
identifier f;
@@

f (...) { <+...
* spin_lock_irq (E1,...);
... when != E1
* return ...;
...+> }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-04-09 13:43:01 +02:00
Anders Larsen
9823f1a846 ARM: 6043/1: AT91 slow-clock resume: Don't wait for a disabled PLL to lock
at91 slow-clock resume: Don't wait for a disabled PLL to lock.

We run into this problem with the PLLB on the at91: ohci-at91 disables
the PLLB when going to suspend. The slowclock code however tries to do
the same: It saves the PLLB register value and when restoring the value
during resume, it waits for the PLLB to lock again. However the PLL will
never lock and the loop would run into its timeout because the slowclock
code just stored and restored an empty register.
This fixes the problem by only restoring PLLA/PLLB when they were enabled
at suspend time.

Cc: Andrew Victor <avictor.za@gmail.com>
Signed-off-by: Anders Larsen <al@alarsen.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-09 08:31:04 +01:00
Frederic Weisbecker
ab285f2b52 perf: Fix unsafe frame rewinding with hot regs fetching
When we fetch the hot regs and rewind to the nth caller, it
might happen that we dereference a frame pointer outside the
kernel stack boundaries, like in this example:

	perf_trace_sched_switch+0xd5/0x120
        schedule+0x6b5/0x860
        retint_careful+0xd/0x21

Since we directly dereference a userspace frame pointer here while
rewinding behind retint_careful, this may end up in a crash.

Fix this by simply using probe_kernel_address() when we rewind the
frame pointer.

This issue will have a much more proper fix in the next version of the
perf_arch_fetch_caller_regs() API that will only need to rewind to the
first caller.

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: David Miller <davem@davemloft.net>
Cc: Archs <linux-arch@vger.kernel.org>
2010-04-08 19:03:28 +02:00
Bjorn Helgaas
73a0e61458 x86/PCI: ignore Consumer/Producer bit in ACPI window descriptions
ACPI Address Space Descriptors (used in _CRS) have a Consumer/Producer
bit that is supposed to distinguish regions that are consumed directly
by a device from those that are forwarded ("produced") by a bridge.
But BIOSes have apparently not used this consistently, and Windows
seems to ignore it, so I think Linux should ignore it as well.

I can't point to any of these supposed broken BIOSes, but since we
now rely on _CRS by default, I think it's safer to ignore this bit
from the start.

Here are details of my experiments with how Windows handles it:
    https://bugzilla.kernel.org/show_bug.cgi?id=15701

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-04-08 09:23:42 -07:00
Russell King
bb3c9d4f85 Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6
Conflicts:
	arch/arm/mach-mx3/mach-pcm037.c
2010-04-08 10:47:05 +01:00
Linus Torvalds
48de8cb784 Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf, x86: Enable Nehalem-EX support
  perf kmem: Fix breakage introduced by 5a0e3ad slab.h script
2010-04-07 14:01:51 -07:00
Rabin Vincent
d4d9959c09 ARM: 6031/1: fix Thumb-2 decompressor
98e12b5a6e ("ARM: Fix decompressor's kernel size estimation for
ROM=y") broke the Thumb-2 decompressor because it added an entry in the
LC0 table but didn't adjust the offset the Thumb-2 code uses to load the
SP from that table.  Fix it.

Cc: stable <stable@kernel.org>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-07 21:11:29 +01:00
Hartley Sweeten
4742723cbc ARM: 6029/1: ep93xx: gpio.c: local functions should be static
The functions ep93xx_gpio_update_int_params and ep93xx_gpio_int_mask
are not exported and should be static.  This was overlooked when
moving the code from core.c.

Also, change a comment to better indicate what the code is for.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-07 21:11:28 +01:00
Leo Chen
76708ab839 ARM: 6024/1: bcmring: fix missing down on semaphore in dma.c
Added missing down on the memMap->lock semaphore. Also fixed a return
statement so that we always exit with an up (i.e. early exit via return
is not allowed)

Signed-off-by: Leo Hao Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-07 21:11:27 +01:00
Linus Torvalds
63634c8636 Merge branch 'davinci-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci
* 'davinci-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci:
  davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h>
  davinci: DM365: fix duplicate default IRQ priorities
  davinci: edma: clear events in edma_start()
  davinci: da8xx/omap-l1: fix build error when CONFIG_DAVINCI_MUX is undefined
  davinci: timers: don't enable timer until clocksource is initialized
2010-04-07 11:03:06 -07:00
Linus Torvalds
fb1ae63577 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip:
  x86: Fix double enable_IR_x2apic() call on SMP kernel on !SMP boards
  x86: Increase CONFIG_NODES_SHIFT max to 10
  ibft, x86: Change reserve_ibft_region() to find_ibft_region()
  x86, hpet: Fix bug in RTC emulation
  x86, hpet: Erratum workaround for read after write of HPET comparator
  bootmem, x86: Fix 32bit numa system without RAM on node 0
  nobootmem, x86: Fix 32bit numa system without RAM on node 0
  x86: Handle overlapping mptables
  x86: Make e820_remove_range to handle all covered case
  x86-32, resume: do a global tlb flush in S4 resume
2010-04-07 11:02:23 -07:00
Sergei Shtylyov
75392dd304 davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h>
This hushes the following warning:

arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: ‘struct platform_device’
declared inside parameter list
arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: its scope is only this
definition or declaration, which is probably not what you want

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-07 09:51:58 -07:00
Linus Torvalds
addb2d6c13 Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Remove unused variable from ptrace
  microblaze: io.h: Add io big-endian function
  microblaze: Enable memory leak detector
  microblaze: Fix futex code
  microblaze: Fix ftrace_update_ftrace_func panic
2010-04-07 08:48:39 -07:00
David Howells
08dc179b9b frv: fix kernel/user segment handling in NOMMU mode
In NOMMU mode, the FRV segment handling is broken because KERNEL_DS ==
USER_DS.  This causes tests of the following sort:

	/* don't pin down non-user-based iovecs */
	if (segment_eq(get_fs(), KERNEL_DS))
		return NULL;

to malfunction.

To fix this, make USER_DS the top of RAM instead of the top of the non-IO
address space, and make KERNEL_DS one more than the top of the non-IO
address space.

Also get rid of FRV's __addr_ok() as nothing uses it.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-07 08:38:05 -07:00
Michal Simek
af2b021fd6 microblaze: Remove unused variable from ptrace
Patch b3c1e01a09 should do it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-07 15:47:55 +02:00
John Linn
7a325aa26c microblaze: io.h: Add io big-endian function
Add new io big-endian function. They will be used
for uartlite and spi driver.

Signed-off-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-07 15:47:37 +02:00
Joerg Roedel
4b83873d3d x86/gart: Disable GART explicitly before initialization
If we boot into a crash-kernel the gart might still be
enabled and its caches might be dirty. This can result in
undefined behavior later. Fix it by explicitly disabling the
gart hardware before initialization and flushing the caches
after enablement.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2010-04-07 14:36:30 +02:00
Joerg Roedel
12ff4bf58b Merge branch 'amd-iommu/fixes' into iommu/fixes 2010-04-07 14:36:20 +02:00
Chris Wright
d18c69d389 x86/amd-iommu: use for_each_pci_dev
Replace open coded version with for_each_pci_dev

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2010-04-07 11:51:34 +02:00
Chris Wright
8f9f55e83e Revert "x86: disable IOMMUs on kernel crash"
This effectively reverts commit 61d047be99.

Disabling the IOMMU can potetially allow DMA transactions to
complete without being translated.  Leave it enabled, and allow
crash kernel to do the IOMMU reinitialization properly.

Cc: stable@kernel.org
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2010-04-07 11:51:17 +02:00
Chris Wright
549c90dc9a x86/amd-iommu: warn when issuing command to uninitialized cmd buffer
To catch future potential issues we can add a warning whenever we issue
a command before the command buffer is fully initialized.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2010-04-07 11:51:15 +02:00
Chris Wright
75f66533bc x86/amd-iommu: enable iommu before attaching devices
Hit another kdump problem as reported by Neil Horman.  When initializaing
the IOMMU, we attach devices to their domains before the IOMMU is
fully (re)initialized.  Attaching a device will issue some important
invalidations.  In the context of the newly kexec'd kdump kernel, the
IOMMU may have stale cached data from the original kernel.  Because we
do the attach too early, the invalidation commands are placed in the new
command buffer before the IOMMU is updated w/ that buffer.  This leaves
the stale entries in the kdump context and can renders device unusable.
Simply enable the IOMMU before we do the attach.

Cc: stable@kernel.org
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2010-04-07 11:50:50 +02:00
Michal Simek
4bb30baa6d microblaze: Fix futex code
Use logical and NOT for ANDN. It was likely type fault.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-07 07:27:25 +02:00
Steven J. Magnani
d2bf98e6fc microblaze: Fix ftrace_update_ftrace_func panic
The Microblaze dynamic ftrace code assumes a call ordering that is not met
in all scenarios. Specifically, executing a command similar to:

  echo 105 > /sys/kernel/debug/tracing/set_ftrace_pid

before any other tracing-related commands results in a kernel panic:

  BUG: failure at arch/microblaze/kernel/ftrace.c:198/ftrace_update_ftrace_func()!

Recoding ftrace_update_ftrace_func() to use &ftrace_caller directly eliminates
the need to capture its address elsewhere (and thus rely on a particular call
sequence).

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-07 07:27:25 +02:00
Vince Weaver
134fbadf02 perf, x86: Enable Nehalem-EX support
According to Intel Software Devel Manual Volume 3B, the
Nehalem-EX PMU is just like regular Nehalem (except for the
uncore support, which is completely different).

Signed-off-by:  Vince Weaver <vweaver1@eecs.utk.edu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Lin Ming <ming.m.lin@intel.com>
LKML-Reference: <alpine.DEB.2.00.1004060956580.1417@cl320.eecs.utk.edu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-06 17:52:59 +02:00
Kevin Hilman
c8e42de6ef davinci: DM365: fix duplicate default IRQ priorities
IRQ 29 has two possible interrupts DDRINT and RTC, but having both in
the default priority table is confusing (and triggers a warning from
sparse.)

This patch removes the lower priority DDRINT from the default priority
table leaving the RTC setting as the default.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-05 15:25:11 -07:00
Brian Niebuhr
bb17ef102b davinci: edma: clear events in edma_start()
This patch fixes an issue where a DMA channel can erroneously process an
event generated by a previous transfer.  A failure case is where DMA is
being used for SPI transmit and receive channels on OMAP L138.  In this
case there is a single bit that controls all event generation from the
SPI peripheral.  Therefore it is possible that between when edma_stop()
has been called for the transmit channel on a previous transfer and
edma_start() is called for the transmit channel on a subsequent transfer,
that a transmit event has been generated.

The fix is to clear events in edma_start().  This prevents false events
from being processed when events are enabled for that channel.

Signed-off-by: Brian Niebuhr <bniebuhr@efjohnson.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-05 15:25:11 -07:00
Sekhar Nori
5eb2e891f0 davinci: da8xx/omap-l1: fix build error when CONFIG_DAVINCI_MUX is undefined
The da8xx/omap-l1 boards refuse to build when CONFIG_DAVINCI_MUX is undefined
because arch/arm/mach-davinci/mux.c:da8xx_pinmux_setup() is not defined.

This patch fixes this issue. This is build tested with davinci_all_defconfig
and da8xx_omapl_defconfig and boot tested on DA830 EVM.

Reported-by: Shanmuga Sundaram Mahendran <shanmuga@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-05 15:25:11 -07:00
Kevin Hilman
d99c387114 davinci: timers: don't enable timer until clocksource is initialized
On da830, when the same timer is used for clocksource and clockevent,
the timer can be started before the clockevent is
registered/initialzed.  This creates a window where a timer
interrupt might fire before the clockevent handler has been
setup and causes a crash.

This patch moves the actual enable/start of the timer after
the clockevent has ben registered.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-04-05 15:25:11 -07:00
Tejun Heo
336f5899d2 Merge branch 'master' into export-slabh 2010-04-05 11:37:28 +09:00
Linus Torvalds
db217dece3 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sunxvr500: Ignore secondary output PCI devices.
  sparc64: Implement perf_arch_fetch_caller_regs
  sparc64: Update defconfig.
  sparc64: Fix array size reported by vmemmap_populate()
  sparc: Fix regset register window handling.
  drivers/serial/sunsu.c: Correct use after free
2010-04-04 12:14:44 -07:00
Linus Torvalds
8ce42c8b7f Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Always build the powerpc perf_arch_fetch_caller_regs version
  perf: Always build the stub perf_arch_fetch_caller_regs version
  perf, probe-finder: Build fix on Debian
  perf/scripts: Tuple was set from long in both branches in python_process_event()
  perf: Fix 'perf sched record' deadlock
  perf, x86: Fix callgraphs of 32-bit processes on 64-bit kernels
  perf, x86: Fix AMD hotplug & constraint initialization
  x86: Move notify_cpu_starting() callback to a later stage
  x86,kgdb: Always initialize the hw breakpoint attribute
  perf: Use hot regs with software sched switch/migrate events
  perf: Correctly align perf event tracing buffer
2010-04-04 12:13:10 -07:00
David S. Miller
954fbc8985 sparc64: Implement perf_arch_fetch_caller_regs
We provide regs->tstate, regs->tpc, regs->tnpc and
regs->u_regs[UREG_FP].

regs->tstate is necessary for:

	user_mode()		(via perf_exclude_event())

	perf_misc_flags()	(via perf_prepare_sample())

regs->tpc is necessary for:

	perf_instruction_pointer() (via perf_prepare_sample())

and regs->u_regs[UREG_FP] is necessary for:

	perf_callchain()	(via perf_prepare_sample())

The regs->tnpc value is provided just to be tidy.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03 23:50:59 -07:00
David S. Miller
3f6c148df4 sparc64: Update defconfig.
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03 16:18:32 -07:00
David S. Miller
87e8b821ed Merge branch 'master' of /home/davem/src/GIT/linux-2.6/ 2010-04-03 15:49:14 -07:00
Ben Hutchings
33cd9dfa3a sparc64: Fix array size reported by vmemmap_populate()
vmemmap_populate() attempts to report the used index and total size of
vmemmap_table, but it wrongly shifts the total size so that it is
always shown as 0.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03 13:58:45 -07:00
Frederic Weisbecker
6e03bb5ad3 perf: Always build the powerpc perf_arch_fetch_caller_regs version
Now that software events use perf_arch_fetch_caller_regs() too, we
need the powerpc version to be always built.

Fixes the following build error:

	(.text+0x3210): undefined reference to `perf_arch_fetch_caller_regs'
	(.text+0x3324): undefined reference to `perf_arch_fetch_caller_regs'
	(.text+0x33bc): undefined reference to `perf_arch_fetch_caller_regs'
	(.text+0x33ec): undefined reference to `perf_arch_fetch_caller_regs'
	(.text+0xd4a0): undefined reference to `perf_arch_fetch_caller_regs'
	arch/powerpc/kernel/built-in.o:(.text+0xd528): more undefined references to `perf_arch_fetch_caller_regs' follow
	make[1]: *** [.tmp_vmlinux1] Error 1
	make: *** [sub-make] Error 2

Reported-by: Michael Ellerman <michael@ellerman.id.au>
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
2010-04-03 12:42:00 +02:00
Linus Torvalds
5e11611a5d Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 5965/1: Fix soft lockup in at91 udc driver
  ARM: 6006/1: ARM: Use the correct NOP size in memmove for Thumb-2 kernel builds
  ARM: 6005/1: arm: kprobes: fix register corruption with jprobes
  ARM: 6003/1: removing compilation warning from pl061.h
  ARM: 6001/1: removing compilation warning comming from clkdev.h
  ARM: 6000/1: removing compilation warning comming from <asm/irq.h>
  ARM: 5999/1: Including device.h and resource.h header files in linux/amba/bus.h
  ARM: 5997/1: ARM: Correct the VFPv3 detection
  ARM: 5996/1: ARM: Change the mandatory barriers implementation (4/4)
  ARM: 5995/1: ARM: Add L2x0 outer_sync() support (3/4)
  ARM: 5994/1: ARM: Add outer_cache_fns.sync function pointer (2/4)
  ARM: 5993/1: ARM: Move the outer_cache definitions into a separate file (1/4)
2010-04-02 19:50:11 -07:00
Linus Torvalds
d4509e5a6e Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6
* 'merge' of git://git.secretlab.ca/git/linux-2.6:
  powerpc/5200: in lpbfifo, flag DMA irqs as enabled after requesting them
  powerpc/fsl: add device tree binding for QE firmware
  of/flattree: Fix unhandled OF_DT_NOP tag when unflattening the device tree
2010-04-02 19:49:50 -07:00
Suresh Siddha
472a474c66 x86: Fix double enable_IR_x2apic() call on SMP kernel on !SMP boards
Jan Grossmann reported kernel boot panic while booting SMP
kernel on his system with a single core cpu. SMP kernels call
enable_IR_x2apic() from native_smp_prepare_cpus() and on
platforms where the kernel doesn't find SMP configuration we
ended up again calling enable_IR_x2apic() from the
APIC_init_uniprocessor() call in the smp_sanity_check(). Thus
leading to kernel panic.

Don't call enable_IR_x2apic() and default_setup_apic_routing()
from APIC_init_uniprocessor() in CONFIG_SMP case.

NOTE: this kind of non-idempotent and assymetric initialization
sequence is rather fragile and unclean, we'll clean that up
in v2.6.35. This is the minimal fix for v2.6.34.

Reported-by: Jan.Grossmann@kielnet.net
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: <jbarnes@virtuousgeek.org>
Cc: <david.woodhouse@intel.com>
Cc: <weidong.han@intel.com>
Cc: <youquan.song@intel.com>
Cc: <Jan.Grossmann@kielnet.net>
Cc: <stable@kernel.org> # [v2.6.32.x, v2.6.33.x]
LKML-Reference: <1270083887.7835.78.camel@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-02 20:48:47 +02:00
Torok Edwin
257ef9d21f perf, x86: Fix callgraphs of 32-bit processes on 64-bit kernels
When profiling a 32-bit process on a 64-bit kernel, callgraph tracing
stopped after the first function, because it has seen a garbage memory
address (tried to interpret the frame pointer, and return address as a
64-bit pointer).

Fix this by using a struct stack_frame with 32-bit pointers when the
TIF_IA32 flag is set.

Note that TIF_IA32 flag must be used, and not is_compat_task(), because
the latter is only set when the 32-bit process is executing a syscall,
which may not always be the case (when tracing page fault events for
example).

Signed-off-by: Török Edwin <edwintorok@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
LKML-Reference: <1268820436-13145-1-git-send-email-edwintorok@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-02 19:30:03 +02:00
Peter Zijlstra
b38b24ead3 perf, x86: Fix AMD hotplug & constraint initialization
Commit 3f6da39 ("perf: Rework and fix the arch CPU-hotplug hooks") moved
the amd northbridge allocation from CPUS_ONLINE to CPUS_PREPARE_UP
however amd_nb_id() doesn't work yet on prepare so it would simply bail
basically reverting to a state where we do not properly track node wide
constraints - causing weird perf results.

Fix up the AMD NorthBridge initialization code by allocating from
CPU_UP_PREPARE and installing it from CPU_STARTING once we have the
proper nb_id. It also properly deals with the allocation failing.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
[ robustify using amd_has_nb() ]
Signed-off-by: Stephane Eranian <eranian@google.com>
LKML-Reference: <1269353485.5109.48.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-02 19:30:02 +02:00
Peter Zijlstra
8525702409 x86: Move notify_cpu_starting() callback to a later stage
Because we need to have cpu identification things done by the time we run
CPU_STARTING notifiers.

( This init ordering will be relied on by the next fix. )

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1269353485.5109.48.camel@twins>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-02 19:30:01 +02:00
Ingo Molnar
50d11d190a Merge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/urgent 2010-04-02 19:29:17 +02:00
David Rientjes
51591e31dc x86: Increase CONFIG_NODES_SHIFT max to 10
Some larger systems require more than 512 nodes, so increase the
maximum CONFIG_NODES_SHIFT to 10 for a new max of 1024 nodes.

This was tested with numa=fake=64M on systems with more than
64GB of RAM. A total of 1022 nodes were initialized.

Successfully builds with no additional warnings on x86_64
allyesconfig.

( No effect on any existing config. Newly enabled CONFIG_MAXSMP=y
  will see the new default. )

Signed-off-by: David Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1003251538060.8589@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-02 19:09:31 +02:00
Linus Torvalds
bc53ba2918 Merge branch 'sh/for-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Fix up the SH-3 build for recent TLB changes.
  sh: export return_address() symbol.
  sh: Enable the mmu in start_secondary()
  sh: Fix FDPIC binary loader
  arch/sh/kernel: Use set_cpus_allowed_ptr
  sh: Update ecovec_defconfig
  USB gadget r8a66597-udc.c: duplicated include
  sh: update the TLB replacement counter for entry wiring.
2010-04-02 07:33:38 -07:00
Paul Mundt
be97d758e5 sh: Fix up the SH-3 build for recent TLB changes.
While the MMUCR.URB and ITLB/UTLB differentiation works fine for all SH-4
and later TLBs, these features are absent on SH-3. This splits out
local_flush_tlb_all() in to SH-4 and PTEAEX copies while restoring the
old SH-3 one, subsequently fixing up the build.

This will probably want some further reordering and tidying in the
future, but that's out of scope at present.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-02 16:13:27 +09:00
Paul Mundt
5dd6ef5050 sh: export return_address() symbol.
This is needed with some of the tracing code built as modules, so provide
the export.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-02 16:02:33 +09:00
Yinghai Lu
042be38e61 ibft, x86: Change reserve_ibft_region() to find_ibft_region()
This allows arch code could decide the way to reserve the ibft.

And we should reserve ibft as early as possible, instead of BOOTMEM
stage, in case the table is in RAM range and is not reserved by BIOS
(this will often be the case.)

Move to just after find_smp_config().

Also when CONFIG_NO_BOOTMEM=y, We will not have reserve_bootmem() anymore.

-v2: fix typo about ibft pointed by Konrad Rzeszutek Wilk <konrad@darnok.org>

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4BB510FB.80601@kernel.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Jones <pjones@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad@kernel.org>
CC: Jan Beulich <jbeulich@novell.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-04-01 16:12:48 -07:00
Alok Kataria
b4a5e8a1de x86, hpet: Fix bug in RTC emulation
We think there exists a bug in the HPET code that emulates the RTC.

In the normal case, when the RTC frequency is set, the rtc driver tells
the hpet code about it here:

int hpet_set_periodic_freq(unsigned long freq)
{
        uint64_t clc;

        if (!is_hpet_enabled())
                return 0;

        if (freq <= DEFAULT_RTC_INT_FREQ)
                hpet_pie_limit = DEFAULT_RTC_INT_FREQ / freq;
        else {
                clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC;
                do_div(clc, freq);
                clc >>= hpet_clockevent.shift;
                hpet_pie_delta = (unsigned long) clc;
        }
        return 1;
}

If freq is set to 64Hz (DEFAULT_RTC_INT_FREQ) or lower, then
hpet_pie_limit (a static) is set to non-zero.  Then, on every one-shot
HPET interrupt, hpet_rtc_timer_reinit is called to compute the next
timeout.  Well, that function has this logic:

        if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit)
                delta = hpet_default_delta;
        else
                delta = hpet_pie_delta;

Since hpet_pie_limit is not 0, hpet_default_delta is used.  That
corresponds to 64Hz.

Now, if you set a different rtc frequency, you'll take the else path
through hpet_set_periodic_freq, but unfortunately no one resets
hpet_pie_limit back to 0.

Boom....now you are stuck with 64Hz RTC interrupts forever.

The patch below just resets the hpet_pie_limit value when requested freq
is greater than DEFAULT_RTC_INT_FREQ, which we think fixes this problem.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
LKML-Reference: <201003112200.o2BM0Hre012875@imap1.linux-foundation.org>
Signed-off-by: Daniel Hecht <dhecht@vmware.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-04-01 15:21:48 -07:00
Pallipadi, Venkatesh
8da854cb02 x86, hpet: Erratum workaround for read after write of HPET comparator
On Wed, Feb 24, 2010 at 03:37:04PM -0800, Justin Piszcz wrote:
> Hello,
>
> Again, on the Intel DP55KG board:
>
> # uname -a
> Linux host 2.6.33 #1 SMP Wed Feb 24 18:31:00 EST 2010 x86_64 GNU/Linux
>
> [    1.237600] ------------[ cut here ]------------
> [    1.237890] WARNING: at arch/x86/kernel/hpet.c:404 hpet_next_event+0x70/0x80()
> [    1.238221] Hardware name:
> [    1.238504] hpet: compare register read back failed.
> [    1.238793] Modules linked in:
> [    1.239315] Pid: 0, comm: swapper Not tainted 2.6.33 #1
> [    1.239605] Call Trace:
> [    1.239886]  <IRQ>  [<ffffffff81056c13>] ? warn_slowpath_common+0x73/0xb0
> [    1.240409]  [<ffffffff81079608>] ? tick_dev_program_event+0x38/0xc0
> [    1.240699]  [<ffffffff81056cb0>] ? warn_slowpath_fmt+0x40/0x50
> [    1.240992]  [<ffffffff81079608>] ? tick_dev_program_event+0x38/0xc0
> [    1.241281]  [<ffffffff81041ad0>] ? hpet_next_event+0x70/0x80
> [    1.241573]  [<ffffffff81079608>] ? tick_dev_program_event+0x38/0xc0
> [    1.241859]  [<ffffffff81078e32>] ? tick_handle_oneshot_broadcast+0xe2/0x100
> [    1.246533]  [<ffffffff8102a67a>] ? timer_interrupt+0x1a/0x30
> [    1.246826]  [<ffffffff81085499>] ? handle_IRQ_event+0x39/0xd0
> [    1.247118]  [<ffffffff81087368>] ? handle_edge_irq+0xb8/0x160
> [    1.247407]  [<ffffffff81029f55>] ? handle_irq+0x15/0x20
> [    1.247689]  [<ffffffff810294a2>] ? do_IRQ+0x62/0xe0
> [    1.247976]  [<ffffffff8146be53>] ? ret_from_intr+0x0/0xa
> [    1.248262]  <EOI>  [<ffffffff8102f277>] ? mwait_idle+0x57/0x80
> [    1.248796]  [<ffffffff8102645c>] ? cpu_idle+0x5c/0xb0
> [    1.249080] ---[ end trace db7f668fb6fef4e1 ]---
>
> Is this something Intel has to fix or is it a bug in the kernel?

This is a chipset erratum.

Thomas: You mentioned we can retain this check only for known-buggy and
hpet debug kind of options. But here is the simple workaround patch for
this particular erratum.

Some chipsets have a erratum due to which read immediately following a
write of HPET comparator returns old comparator value instead of most
recently written value.

Erratum 15 in
"Intel I/O Controller Hub 9 (ICH9) Family Specification Update"
(http://www.intel.com/assets/pdf/specupdate/316973.pdf)

Workaround for the errata is to read the comparator twice if the first
one fails.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
LKML-Reference: <20100225185348.GA9674@linux-os.sc.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@gmail.com>
Cc: <stable@kernel.org>
2010-04-01 15:21:47 -07:00
Andi Kleen
909fc87b32 x86: Handle overlapping mptables
We found a system where the MP table MPC and MPF structures overlap.

That doesn't really matter because the mptable is not used anyways with ACPI,
but it leads to a panic in the early allocator due to the overlapping
reservations in 2.6.33.

Earlier kernels handled this without problems.

Simply change these reservations to reserve_early_overlap_ok to avoid
the panic.

Reported-by: Thomas Renninger <trenn@suse.de>
Tested-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <20100329074111.GA22821@basil.fritz.box>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@kernel.org>
2010-04-01 13:31:07 -07:00
Michal Simek
ca3865bae5 microblaze: Support word copying in copy_tofrom_user
Word copying is used only for aligned addresses.
Here is space for improving to use any better copying technique.
Look at memcpy implementation.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:25 +02:00
Michal Simek
6059b3cbeb microblaze: Print early printk information to log buffer
If early printk console is not enabled then all messages
are written to log buffer.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:25 +02:00
Michal Simek
3f21893586 microblaze: head.S typo fix
I forget to change register name in comments.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:24 +02:00
Michal Simek
0691c97d74 microblaze: Use MICROBLAZE_TLB_SIZE in asm code
TLB size was hardcoded in asm code. This patch brings ability
to change TLB size only in one place. (mmu.h).

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:24 +02:00
Michal Simek
9373dd6ab1 microblaze: Kconfig Fix - pci
I forget to remove pci Kconfig option.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:24 +02:00
Michal Simek
78ebfa884b microblaze: Adding likely macros
On the base on GCOV analytics is helpful to add likely/unlikely
macros.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:24 +02:00
Michal Simek
13851966da microblaze: Add .type and .size to ASM functions
Cachegrind analysis need this fix to be able to log asm functions.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:24 +02:00
Michal Simek
e84452dd9f microblaze: Fix TLB macros
To be able to do trace TLB operations.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:24 +02:00
Michal Simek
3765d6958d microblaze: Use instruction with delay slot
Sync labels.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:23 +02:00
Michal Simek
bd1637d63e microblaze: Remove additional resr and rear loading
RESR and REAR uses the same regs in whole file.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:23 +02:00
Michal Simek
b175bcfe31 microblaze: Change register usage for ESR and EAR
This change synchronize register usage in code.
ESR = R4
EAR = R3

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:23 +02:00
Michal Simek
7a6bbdc930 microblaze: Prepare work for optimization in exception code
Any sync branch must follow mts instructions not mfs.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:23 +02:00
Michal Simek
708e7153d6 microblaze: Add DEBUG option
Disable debug option in asm code.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:23 +02:00
Michal Simek
ee68f1745e microblaze: Support systems without lmb bram
When the system has no lmb bram, main memory should be start from
zero because of microblaze vectors.

DTS fragment could look like:
	DDR2_SDRAM: memory@0 {
		device_type = "memory";
		reg = < 0x0 0x10000000 >;
	} ;

Then you have to setup CONFIG_KERNEL_BASE_ADDR=0 which caused
that kernel physical start address will be zero. On reset vector place
will be jump to 0x100 and on 0x100 starts kernel text.

You have to solve how to load the kernel before cpu starts.
Tested with XMD.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:23 +02:00
Michal Simek
89ae9753ae microblaze: uaccess: Sync strlen, strnlen, copy_to/from_user
Last sync.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:23 +02:00
Michal Simek
94804a9b3d microblaze: uaccess: Unify __copy_tofrom_user
Move to generic location.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:22 +02:00
Michal Simek
cca79120c2 microblaze: uaccess: Move functions to generic location
noMMU and MMU use them.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:22 +02:00
Michal Simek
ef4e277b5d microblaze: uaccess: Fix put_user for noMMU
Here is small regression on dhrystone tests and I think
that on all benchmarking tests. It is due to better checking
mechanism in put_user macro

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:22 +02:00
Michal Simek
3a6d77245e microblaze: uaccess: Fix get_user macro for noMMU
Use unified version.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:22 +02:00
Michal Simek
527bdb52d5 microblaze: uaccess: fix clear_user for noMMU kernel
Previous patches fixed only MMU version and this is the first
patch for noMMU kernel

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:21 +02:00
Michal Simek
40e11e3380 microblaze: uaccess: Fix strncpy_from_user function
Generic implementation for noMMU and MMU version

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:21 +02:00
Michal Simek
4270690bd4 microblaze: uaccess: fix copy_from_user macro
copy_from_user macro also use copy_tofrom_user function

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:21 +02:00
Michal Simek
cc5a428b7a microblaze: uaccess: copy_to_user unification
noMMU and MMU kernel will use copy copy_tofrom_user
asm implementation.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:20 +02:00
Michal Simek
0dcb409de7 microblaze: uaccess: sync put/get/clear_user macros
Add macro description and resort.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:20 +02:00
Michal Simek
8b651aa4a7 microblaze: uaccess: fix put_user and get_user macros
Use FIXUP macros and resort them.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:20 +02:00
Michal Simek
c77a9c4bb7 microblaze: uaccess: fix __get_user_asm macro
It is used __FIXUP_SECTION and __EX_TABLE_SECTION macros.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:20 +02:00
Michal Simek
40b1156db0 microblaze: uaccess: fix clean user macro
This is the first patch which does uaccess unification.
I choosed to do several patches to be able to use bisect
in future if any fault happens.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:20 +02:00
Michal Simek
60a729f7bb microblaze: move noMMU __range_ok function to uaccess.h
The same noMMU and MMU functions should be placed in
one file.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:20 +02:00
Michal Simek
357bc3c928 microblaze: Move exception_table_entry upward
Just sort to be able remove whole block.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:19 +02:00
Michal Simek
40db083433 microblaze: Remove segment.h
I would like to use asm-generic uaccess.h where are segment
macros defined. This is just first step.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:19 +02:00
Michal Simek
4009819cf9 microblaze: Remove memset in free_init_pages
We don't need to do it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:19 +02:00
Arun Bhanu
6fa114e0f1 microblaze: Makefile cleanups
If CONFIG_INITRAMFS_SOURCE is set, "scripts/gen_initramfs_list.sh"
checks if the cpio image exists. Remove the duplicate check from the
Makefile.

Remove the "clean-kernel" variable which is unused in the Makefile and
is not used by the Kbuild.

Signed-off-by: Arun Bhanu <arun@bhanu.net>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:19 +02:00
Arun Bhanu
8a8804f1ab microblaze: Fix Makefile to delete build generated files
'make clean' does not to delete the following build generated file:
	arch/microblaze/boot/linux.bin.ub

'make mrproper' does not to delete the following build generated files:
	arch/microblaze/boot/simpleImage.*

Fix the Makefile to delete these build generated files.

See [1] for a discussion on why simpleImage.* files are deleted with 'make
mrproper' and not with 'make clean'.
	[1] http://lkml.org/lkml/2010/3/12/96

Signed-off-by: Arun Bhanu <arun@bhanu.net>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:19 +02:00
Arun Bhanu
699d17bc14 microblaze: Add a missing single quote to make 'make help' happy
'make ARCH=microblaze help' fails with the following error due to a
missing single quote.

/bin/sh: -c: line 0: unexpected EOF while looking for matching `''
/bin/sh: -c: line 1: syntax error: unexpected end of file
make: *** [help] Error 2

Signed-off-by: Arun Bhanu <arun@bhanu.net>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:19 +02:00
Steven J. Magnani
0c4ec16b86 microblaze: Fix "kstack=" parsing
The "kstack=" command line parameter is not parsed correctly.
All proper values are interpreted as zero.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:18 +02:00
Jason Wessel
ab310b5edb x86,kgdb: Always initialize the hw breakpoint attribute
It is required to call hw_breakpoint_init() on an attr before using it
in any other calls.  This fixes the problem where kgdb will sometimes
fail to initialize on x86_64.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: 2.6.33 <stable@kernel.org>
LKML-Reference: <1269975907-27602-1-git-send-email-jason.wessel@windriver.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-04-01 08:26:32 +02:00
Frederic Weisbecker
e49a5bd381 perf: Use hot regs with software sched switch/migrate events
Scheduler's task migration events don't work because they always
pass NULL regs perf_sw_event(). The event hence gets filtered
in perf_swevent_add().

Scheduler's context switches events use task_pt_regs() to get
the context when the event occured which is a wrong thing to
do as this won't give us the place in the kernel where we went
to sleep but the place where we left userspace. The result is
even more wrong if we switch from a kernel thread.

Use the hot regs snapshot for both events as they belong to the
non-interrupt/exception based events family. Unlike page faults
or so that provide the regs matching the exact origin of the event,
we need to save the current context.

This makes the task migration event working and fix the context
switch callchains and origin ip.

Example: perf record -a -e cs

Before:

    10.91%      ksoftirqd/0                  0  [k] 0000000000000000
                |
                --- (nil)
                    perf_callchain
                    perf_prepare_sample
                    __perf_event_overflow
                    perf_swevent_overflow
                    perf_swevent_add
                    perf_swevent_ctx_event
                    do_perf_sw_event
                    __perf_sw_event
                    perf_event_task_sched_out
                    schedule
                    run_ksoftirqd
                    kthread
                    kernel_thread_helper

After:

    23.77%  hald-addon-stor  [kernel.kallsyms]  [k] schedule
            |
            --- schedule
               |
               |--60.00%-- schedule_timeout
               |          wait_for_common
               |          wait_for_completion
               |          blk_execute_rq
               |          scsi_execute
               |          scsi_execute_req
               |          sr_test_unit_ready
               |          |
               |          |--66.67%-- sr_media_change
               |          |          media_changed
               |          |          cdrom_media_changed
               |          |          sr_block_media_changed
               |          |          check_disk_change
               |          |          cdrom_open

v2: Always build perf_arch_fetch_caller_regs() now that software
events need that too. They don't need it from modules, unlike trace
events, so we keep the EXPORT_SYMBOL in trace_event_perf.c

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
2010-04-01 08:26:31 +02:00
David S. Miller
b857bd2922 sparc: Fix regset register window handling.
We have to adjust 'reg_window' down by 16 becuase the 'pos' iterator
we'll use to index into the stack slots will be between 16 and 32.

Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-31 18:05:05 -07:00
Yinghai Lu
9f3a5f52aa x86: Make e820_remove_range to handle all covered case
Rusty found on lguest with trim_bios_range, max_pfn is not right anymore, and
looks e820_remove_range does not work right.

[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  LGUEST: 0000000000000000 - 0000000004000000 (usable)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
[    0.000000] DMI not present or invalid.
[    0.000000] last_pfn = 0x3fa0 max_arch_pfn = 0x100000
[    0.000000] init_memory_mapping: 0000000000000000-0000000003fa0000

root cause is: the e820_remove_range doesn't handle the all covered
case.  e820_remove_range(BIOS_START, BIOS_END - BIOS_START, ...)
produces a bogus range as a result.

Make it match e820_update_range() by handling that case too.

Reported-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Tested-by: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <4BB18E55.6090903@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-03-31 17:40:57 -07:00
Ranjith Lohithakshan
d54a45e253 OMAP3: clock: fix enable bit used for dpll4_m4x2 clock
The enable bit for dpll4_m4x2 clock should be OMAP3430_PWRDN_DSS1_SHIFT.
The code erroneously uses OMAP3430_PWRDN_CAM_SHIFT which is meant for
dpll4_m5x2 clock.

This came into notice during a recent review of the clock tree.

Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-03-31 04:16:30 -06:00
Rajendra Nayak
766d305fea OMAP4: prcm: Use logical OR instead of bitwise OR
This patch fixes usage of bitwise OR in if conditions, and instead
uses logical OR.

Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Cc: Abhijit Pagare <abhijitpagare@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-03-31 04:16:30 -06:00
Thara Gopinath
56dc79aba1 OMAP: HWMOD: Bug fixes in hwmod structure definitions
This patch corrects the width of sysc_flags in hwmod sysconfig structure
where the values to be stored to this variable exceed the current
field width.

Signed-off-by: Thara Gopinath <thara@ti.com>
[paul@pwsan.com: edited to apply; rearranged structure members to pack]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-03-31 04:16:29 -06:00
Thara Gopinath
d5647c18ea OMAP: HWMOD: Adding clockdomain check
This patch adds check for presence of clockdomain structure in the API
omap_hwmod_get_pwrdm before trying to access the powerdomain structure.
This will prevent unnecessary crashing of the system in case of a
clock node with out an associated clockdomain.

Signed-off-by: Thara Gopinath <thara@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-03-31 04:16:29 -06:00
Shaohua Li
8ae06d223f x86-32, resume: do a global tlb flush in S4 resume
Colin King reported a strange oops in S4 resume code path (see below). The test
system has i5/i7 CPU. The kernel doesn't open PAE, so 4M page table is used.
The oops always happen a virtual address 0xc03ff000, which is mapped to the
last 4k of first 4M memory. Doing a global tlb flush fixes the issue.

EIP: 0060:[<c0493a01>] EFLAGS: 00010086 CPU: 0
EIP is at copy_loop+0xe/0x15
EAX: 36aeb000 EBX: 00000000 ECX: 00000400 EDX: f55ad46c
ESI: 0f800000 EDI: c03ff000 EBP: f67fbec4 ESP: f67fbea8
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
...
...
CR2: 00000000c03ff000

Tested-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
LKML-Reference: <20100305005932.GA22675@sli10-desk.sh.intel.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@kernel.org>
2010-03-30 11:46:02 -07:00
Linus Torvalds
be3fd3cc7c Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Do not free zero sized per cpu areas
  x86: Make sure free_init_pages() frees pages on page boundary
  x86: Make smp_locks end with page alignment
2010-03-30 07:22:38 -07:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Tejun Heo
57f4c226d1 x86: don't include slab.h from arch/x86/include/asm/pgtable_32.h
Including slab.h from x86 pgtable_32.h creates a troublesome
dependency chain w/ ftrace enabled.  The following chain leads to
inclusion of pgtable_32.h from define_trace.h.

 trace/define_trace.h
 trace/ftrace.h
 linux/ftrace_event.h
 linux/ring_buffer.h
 linux/mm.h
 asm/pgtable.h
 asm/pgtable_32.h

slab.h itself defines trace hooks via

 linux/sl[aou]b_def.h
 linux/kmemtrace.h
 trace/events/kmem.h

If slab.h is not included before define_trace.h is included, this
leads to duplicate definitions of kmemtrace hooks or other include
dependency problems.

pgtable_32.h doesn't need slab.h to begin with.  Don't include it from
there.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
2010-03-30 22:02:21 +09:00
Alberto Panizzo
b3aa111f7a MXC: mach_armadillo5x0: Add USB Host support.
This add USB Host capability. The Armadillo 500 board is supplied
with two USB Host connectors driven by the USB OTG and USB Host 2
ports, through two NXP isp 1504 transceivers.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-30 14:25:03 +02:00
Andrea Gelmini
17669fd60e ARM mach-mx3: duplicated include
arch/arm/mach-mx3/mx31lite-db.c: linux/platform_device.h is included more than once.

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-30 14:22:58 +02:00
Andrea Gelmini
034cf2362a ARM mach-mx3: duplicated include
arch/arm/mach-mx3/mach-pcm037.c: linux/fsl_devices.h is included more than once.

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-30 14:22:58 +02:00
Vladimir Zapolskiy
7d7a77e567 imx31: add watchdog device on litekit board.
This patch adds support for SoC build-in watchdog device on litekit
board.

Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-30 14:21:12 +02:00
Vladimir Zapolskiy
a7dc12ba75 imx3: Add watchdog platform device support
This patch adds support for build-in watchdog device found on
Freescale imx31 and imx35 SoCs.

Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-30 14:21:12 +02:00
Linus Torvalds
c45140a996 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Properly truncate pt_regs framepointer in perf callback.
  arch/sparc/kernel: Use set_cpus_allowed_ptr
  sparc: Fix use of uid16_t and gid16_t in asm/stat.h
2010-03-29 14:41:00 -07:00
David S. Miller
9e8307ecaf sparc64: Properly truncate pt_regs framepointer in perf callback.
For 32-bit processes, we save the full 64-bits of the regs in pt_regs.

But unlike when the userspace actually does load and store
instructions, the top 32-bits don't get automatically truncated by the
cpu in kernel mode (because the kernel doesn't execute with PSTATE_AM
address masking enabled).

So we have to do it by hand.

Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-29 13:08:52 -07:00
Yinghai Lu
c967da6a0b x86: Make sure free_init_pages() frees pages on page boundary
When CONFIG_NO_BOOTMEM=y, it could use memory more effiently, or
in a more compact fashion.

Example:

 Allocated new RAMDISK: 00ec2000 - 0248ce57
 Move RAMDISK from 000000002ea04000 - 000000002ffcee56 to 00ec2000 - 0248ce56

The new RAMDISK's end is not page aligned.
Last page could be shared with other users.

When free_init_pages are called for initrd or .init, the page
could be freed and we could corrupt other data.

code segment in free_init_pages():

 |        for (; addr < end; addr += PAGE_SIZE) {
 |                ClearPageReserved(virt_to_page(addr));
 |                init_page_count(virt_to_page(addr));
 |                memset((void *)(addr & ~(PAGE_SIZE-1)),
 |                        POISON_FREE_INITMEM, PAGE_SIZE);
 |                free_page(addr);
 |                totalram_pages++;
 |        }

last half page could be used as one whole free page.

So page align the boundaries.

-v2: make the original initramdisk to be aligned, according to
     Johannes, otherwise we have the chance to lose one page.
     we still need to keep initrd_end not aligned, otherwise it could
     confuse decompressor.
-v3: change to WARN_ON instead, suggested by Johannes.
-v4: use PAGE_ALIGN, suggested by Johannes.
     We may fix that macro name later to PAGE_ALIGN_UP, and PAGE_ALIGN_DOWN
     Add comments about assuming ramdisk start is aligned
     in relocate_initrd(), change to re get ramdisk_image instead of save it
     to make diff smaller. Add warning for wrong range, suggested by Johannes.
-v6: remove one WARN()
     We need to align beginning in free_init_pages()
     do not copy more than ramdisk_size, noticed by Johannes

Reported-by: Stanislaw Gruszka <sgruszka@redhat.com>
Tested-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1269830604-26214-3-git-send-email-yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-29 18:55:33 +02:00
Yinghai Lu
596b711ed6 x86: Make smp_locks end with page alignment
Fix:

 ------------[ cut here ]------------
 WARNING: at arch/x86/mm/init.c:342 free_init_pages+0x4c/0xfa()
 free_init_pages: range [0x40daf000, 0x40db5c24] is not aligned
 Modules linked in:
 Pid: 0, comm: swapper Not tainted
 2.6.34-rc2-tip-03946-g4f16b23-dirty #50 Call Trace:
  [<40232e9f>] warn_slowpath_common+0x65/0x7c
  [<4021c9f0>] ? free_init_pages+0x4c/0xfa
  [<40881434>] ? _etext+0x0/0x24
  [<40232eea>] warn_slowpath_fmt+0x24/0x27
  [<4021c9f0>] free_init_pages+0x4c/0xfa
  [<40881434>] ? _etext+0x0/0x24
  [<40d3f4bd>] alternative_instructions+0xf6/0x100
  [<40d3fe4f>] check_bugs+0xbd/0xbf
  [<40d398a7>] start_kernel+0x2d5/0x2e4
  [<40d390ce>] i386_start_kernel+0xce/0xd5
 ---[ end trace 4eaa2a86a8e2da22 ]---

Comments in vmlinux.lds.S already said:

 |        /*
 |         * smp_locks might be freed after init
 |         * start/end must be page aligned
 |         */

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <1269830604-26214-2-git-send-email-yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-29 18:42:30 +02:00
David Howells
f7454c5d5c frv/chris: fix lines with a missing semicolons
Commit b26b2d494b ("resource/PCI: align functions now return start
of resource") added lines with missing semicolons.

Add the missing semicolons to the FRV and CRIS arch code.

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: linux@dominikbrodowski.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-29 09:37:14 -07:00
Catalin Marinas
fd522a8dec ARM: 6006/1: ARM: Use the correct NOP size in memmove for Thumb-2 kernel builds
When compiling the kernel to Thumb-2, using a 16-bit NOP in the
memmove() implementation causes the preceding ADD PC instruction to
branch incorrectly in the middle of a 32-bit LDR or STR instruction. The
memmove() code is now similar to the memcpy() template.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-29 17:33:33 +01:00
Mika Westerberg
782a0fd167 ARM: 6005/1: arm: kprobes: fix register corruption with jprobes
Current implementation of jprobes allocates empty pt_regs from the
stack which is then passed to kprobe_handler() and eventually to
singlestep().  Now when instruction being simulated is STMFD (like
in normal function prologues without CONFIG_FRAME_POINTER), stores
using SP actually write over top of the fabricated pt_regs
structure.

This can be reproduced for example by using LKDTM module:
    # modprobe lkdtm
    # mount -t debugfs none /sys/kernel/debug
    # echo PANIC > /sys/kernel/debug/provoke-crash/INT_HW_IRQ_EN

after this, it fails with corrupted registers (before the requested crash would occur):

lkdtm: Crash point INT_HW_IRQ_EN of type PANIC hit, trigger in 9 rounds
lkdtm: Crash point INT_HW_IRQ_EN of type PANIC hit, trigger in 8 rounds
Internal error: Oops - undefined instruction: 0 [#1]
last sysfs file: /sys/devices/platform/serial8250.0/sleep_timeout
Modules linked in: lkdtm
CPU: 0    Not tainted  (2.6.34-rc2 #69)
PC is at irq_desc+0x1638/0xeeb0
LR is at 0x25
pc : [<c050b428>]    lr : [<00000025>]    psr: c80a0013
sp : ce94bd60  ip : c050b3e8  fp : a0000013
r10: c0aa453c  r9 : cf5d4000  r8 : ce9a1822
r7 : c050b424  r6 : 00000025  r5 : c039d8f8  r4 : c050b3e8
r3 : 00000001  r2 : cf4d0440  r1 : c039d8f8  r0 : 00000020
Flags: NZcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 10c5387d  Table: 8e804019  DAC: 00000015
Process sh (pid: 496, stack limit = 0xce94a2e8)
Stack: (0xce94bd60 to 0xce94c000)
[...]
Code: 000002cd 00000000 00000000 00000001 (dead4ead)
---[ end trace 2b46d5f2b682f370 ]---
Kernel panic - not syncing: Fatal exception in interrupt

This patch allocates enough space (2 * sizeof(struct pt_regs)) from
the stack to prevent such corruption.

Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com>
Acked-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-29 17:33:33 +01:00
viresh kumar
55a07517ed ARM: 6001/1: removing compilation warning comming from clkdev.h
clkdev.h is using struct device *. Due to this compilation
warning is comming. Removing this warning.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-29 17:33:32 +01:00
viresh kumar
aedceb2a49 ARM: 6000/1: removing compilation warning comming from <asm/irq.h>
irq.h is using struct pt_regs *. Due to this compilation
warning is comming. Removing this warning by adding declaration
of struct pt_regs.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-29 17:33:31 +01:00
Matt Fleming
4bea3418c7 sh: Enable the mmu in start_secondary()
For the boot, enable_mmu() is called from setup_arch() but we don't call
setup_arch() for any of the other cpus. So turn on the non-boot cpu's
mmu inside of start_secondary().

I noticed this bug on an SMP board when trying to map I/O memory
(smsc911x registers) into the kernel address space. Since the Address
Translation bit in MMUCR wasn't set, accessing the virtual address where
the smsc911x registers were supposedly mapped actually performed a
physical address access.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Cc: stable@kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-29 12:11:51 +09:00
Andrew Stubbs
d5ab780305 sh: Fix FDPIC binary loader
Ensure that the aux table is properly initialized, even when optional
features are missing. Without this, the FDPIC loader did not work.

Signed-off-by: Andrew Stubbs <ams@codesourcery.com>
Cc: stable@kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-29 12:04:19 +09:00
Julia Lawall
59a2f7d9fd arch/sh/kernel: Use set_cpus_allowed_ptr
Use set_cpus_allowed_ptr rather than set_cpus_allowed.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression E1,E2;
@@

- set_cpus_allowed(E1, cpumask_of_cpu(E2))
+ set_cpus_allowed_ptr(E1, cpumask_of(E2))

@@
expression E;
identifier I;
@@

- set_cpus_allowed(E, I)
+ set_cpus_allowed_ptr(E, &I)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-29 11:40:37 +09:00
Yusuke Goda
5f6c477a35 sh: Update ecovec_defconfig
Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-29 11:37:49 +09:00
Catalin Marinas
325ffc3633 ARM: 5997/1: ARM: Correct the VFPv3 detection
A CPU has VFPv3 hardware if the FPSID[19:16] bits are 2 or more.
Currently Linux was only checking for 3 or more.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-28 10:40:14 +01:00
Julia Lawall
d2566af8c4 arch/sparc/kernel: Use set_cpus_allowed_ptr
Use set_cpus_allowed_ptr rather than set_cpus_allowed.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression E1,E2;
@@

- set_cpus_allowed(E1, cpumask_of_cpu(E2))
+ set_cpus_allowed_ptr(E1, cpumask_of(E2))

@@
expression E;
identifier I;
@@

- set_cpus_allowed(E, I)
+ set_cpus_allowed_ptr(E, &I)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-27 21:11:56 -07:00
Rob Landley
7469a9acf9 sparc: Fix use of uid16_t and gid16_t in asm/stat.h
Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-27 08:36:18 -07:00
Roman Fietze
ed01f64b83 powerpc/5200: in lpbfifo, flag DMA irqs as enabled after requesting them
This patch avoids unbalanced enable/disable messages for the DMA
interrupts when running the 5200 platform SCLPC/BestComm driver in DMA
mode.

Signed-off-by: Roman Fietze <roman.fietze@telemotive.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-03-26 22:09:57 -06:00
Linus Torvalds
b72c40949b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  x86/PCI: truncate _CRS windows with _LEN > _MAX - _MIN + 1
  x86/PCI: for host bridge address space collisions, show conflicting resource
  frv/PCI: remove redundant warnings
  x86/PCI: remove redundant warnings
  PCI: don't say we claimed a resource if we failed
  PCI quirk: Disable MSI on VIA K8T890 systems
  PCI quirk: RS780/RS880: work around missing MSI initialization
  PCI quirk: only apply CX700 PCI bus parking quirk if external VT6212L is present
  PCI: complain about devices that seem to be broken
  PCI: print resources consistently with %pR
  PCI: make disabled window printk style match the enabled ones
  PCI: break out primary/secondary/subordinate for readability
  PCI: for address space collisions, show conflicting resource
  resources: add interfaces that return conflict information
  PCI: cleanup error return for pcix get and set mmrbc functions
  PCI: fix access of PCI_X_CMD by pcix get and set mmrbc functions
  PCI: kill off pci_register_set_vga_state() symbol export.
  PCI: fix return value from pcix_get_max_mmrbc()
2010-03-26 16:34:29 -07:00
Linus Torvalds
f3845f3f60 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, amd: Restrict usage of c1e_idle()
  x86: Fix placement of FIX_OHCI1394_BASE
  x86: Handle legacy PIC interrupts on all the cpu's
2010-03-26 15:10:56 -07:00
Linus Torvalds
6fa41366c1 Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  powerpc/perf_events: Fix call-graph recording, add perf_arch_fetch_caller_regs
  perf top: Add missing initialization to zero
  perf probe: Use original address instead of CU-based address
  perf probe: Fix offset to allow signed value
  perf top: Improve the autosizing of column lenghts
  perf probe: Fix need_dwarf flag if lazy matching is used
  perf probe: Fix probe_point buffer overrun
2010-03-26 15:09:33 -07:00
Matt Fleming
4539282dbc sh: update the TLB replacement counter for entry wiring.
Presently the TLB wiring code depends on MMUCR.URB for working out where
to place the wired entry, but fails to take the replacment counter in to
consideration. This fixes up the wiring logic and ensures that wired
entries remain so.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-26 11:37:16 +09:00
Catalin Marinas
e7c5650f60 ARM: 5996/1: ARM: Change the mandatory barriers implementation (4/4)
The mandatory barriers (mb, rmb, wmb) are used even on uniprocessor
systems for things like ordering Normal Non-cacheable memory accesses
with DMA transfer (via Device memory writes). The current implementation
uses dmb() for mb() and friends but this is not sufficient. The DMB only
ensures the relative ordering of the observability of accesses by other
processors or devices acting as masters. In case of DMA transfers
started by writes to device memory, the relative ordering is not ensured
because accesses to slave ports of a device are not considered
observable by the DMB definition.

A DSB is required for the data to reach the main memory (even if mapped
as Normal Non-cacheable) before the device receives the notification to
begin the transfer. Furthermore, some L2 cache controllers (like L2x0 or
PL310) buffer stores to Normal Non-cacheable memory and this would need
to be drained with the outer_sync() function call.

The patch also allows platforms to define their own mandatory barriers
implementation by selecting CONFIG_ARCH_HAS_BARRIERS and providing a
mach/barriers.h file.

Note that the SMP barriers are unchanged (being DMBs as before) since
they are only guaranteed to work with Normal Cacheable memory.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-25 21:13:50 +00:00
Catalin Marinas
23107c5420 ARM: 5995/1: ARM: Add L2x0 outer_sync() support (3/4)
The L2x0 cache controllers need to explicitly drain their write buffer
even for Normal Noncacheable memory accesses.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-25 21:13:50 +00:00
Catalin Marinas
319f551a0a ARM: 5994/1: ARM: Add outer_cache_fns.sync function pointer (2/4)
This patch introduces the outer_cache_fns.sync function pointer together
with the OUTER_CACHE_SYNC config option that can be used to drain the
write buffer of the outer cache.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-25 21:13:49 +00:00
Catalin Marinas
33f663ff91 ARM: 5993/1: ARM: Move the outer_cache definitions into a separate file (1/4)
To avoid #include collisions with subsequent patches in the series, this
patch moves the outer_cache definitions to a separate asm/outercache.h
file.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-25 21:13:49 +00:00
Bjorn Helgaas
d558b483d5 x86/PCI: truncate _CRS windows with _LEN > _MAX - _MIN + 1
Yanko's GA-MA78GM-S2H (BIOS F11) reports the following resource in a PCI
host bridge _CRS:

    [07] 32-Bit DWORD Address Space Resource
         Min Relocatability : MinFixed
         Max Relocatability : MaxFixed
            Address Minimum : CFF00000  (_MIN)
            Address Maximum : FEBFFFFF  (_MAX)
             Address Length : 3EE10000  (_LEN)

This is invalid per spec (ACPI 4.0, 6.4.3.5) because it's a fixed size,
fixed location descriptor, but _LEN != _MAX - _MIN + 1.

Based on https://bugzilla.kernel.org/show_bug.cgi?id=15480#c15, I think
Windows handles this by truncating the window so it fits between _MIN and
_MAX.  I also verified this by modifying the SeaBIOS DSDT and booting
Windows 2008 R2 with qemu.

This patch makes Linux truncate the window, too, which fixes:
    http://bugzilla.kernel.org/show_bug.cgi?id=15480

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Tested-by: Yanko Kaneti <yaneti@declera.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-25 10:14:13 -07:00
Bjorn Helgaas
eb9fc8ef7c x86/PCI: for host bridge address space collisions, show conflicting resource
With insert_resource_conflict(), we can learn what the actual conflict is,
so print that info for debugging purposes.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-25 10:14:07 -07:00
Bjorn Helgaas
99f4692e13 frv/PCI: remove redundant warnings
pci_claim_resource() already prints more detailed error messages, so these
are really redundant.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-25 08:51:40 -07:00
Bjorn Helgaas
c9c9b56471 x86/PCI: remove redundant warnings
pci_claim_resource() already prints more detailed error messages, so these
are really redundant.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-25 08:51:38 -07:00
Sascha Hauer
0491fcbb76 Merge branch 'mx51' into mxc-rc 2010-03-25 08:44:12 +01:00
Alberto Panizzo
ae7a3f13ab MXC: mach-mx31_3ds: add support for freescale mc13783 power management device.
Power Gates must to be always enabled.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-25 08:43:03 +01:00
Alberto Panizzo
a1ac442443 MXC: mach-mx31_3ds: Add SPI1 device support.
Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-25 08:43:03 +01:00
Alberto Panizzo
a1b67b957e MXC: mach-mx31_3ds: Add support for on board NAND Flash.
Since the using of Bad Block Table is not constantly a good behave
I had made it configurable.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-25 08:43:03 +01:00
Alberto Panizzo
11a332adfe MXC: mach-mx31_3ds: Update variable names over recent mach name modification.
Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-25 08:43:03 +01:00
Vladimir Zapolskiy
6dc2d6bf51 imx31: fix parent clock for rtc
According to imx31 reference manual the signal from external low
frequency clock is sent to RTC clock.
The patch makes redundant the previously defined mxc_rtc clock.

Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-25 08:29:41 +01:00
Linus Torvalds
1ff31056fb Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] Orion5x: replace KEY_WLAN with KEY_WPS_BUTTON
  [ARM] Kirkwood: WPS button keycode mapping
  pxa168fb: fix incorrect resource calculation
  [ARM] pxa/raumfeld: fix button name
  [ARM] pxa/raumfeld: remove duplicated #include
  [ARM] locomo: fix unpaired spin_lock_irqsave
  [ARM] locomo: fix SPI register offset
  [ARM] pxa/sharpsl: add dependency of max1111 driver to sharpsl_pm
  [ARM] pxa: remove unnecessary 'select FB_W100' from some platforms
  [ARM] pxa: remove spi cs gpio direction to avoid clash with driver
  [ARM] mmp: fix for variables in uncompress.h being discarded
  [ARM] pxa: fix for variables in uncompress.h being discarded
  ARM: Update mach-types
  ARM: Fix IXP23xx build error in mach/memory.h
2010-03-24 16:51:14 -07:00
Linus Torvalds
541e40ee08 Merge branch 'sh/for-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* 'sh/for-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Silence unintialized variable warnings in dwarf unwinder.
  sh: Tidy up a couple of section mismatches.
  sh: Fix build after dynamic PMB rework
  sh: Replace unsafe manipulation of MMUCR
  sh: Flush ITLB too in PTEAEX's flush_tlb_page()
  sh64: Remove long unused mid_sched macro
  SH: remove superfluous warning from the serial driver
  SH: fix SCIFA SCASCR register bit definitions
  serial: sh-sci: fix SH-Mobile SH breakage
  sh: Add watch-dog register address for SH7722/SH7723/SH7724
  sh: ms7724: Add tiny-document for sound
  sh: mach-ecovec24: Add i2c_put_adapter on sh_eth_init
2010-03-24 16:49:38 -07:00
Martin Schwidefsky
06c0dd72ae [S390] fix boot failures with compressed kernels
Fix two bugs with the kernel image compression:
1) reset the bss section of the compressed vmlinux
2) clear the high half of the registers for 64 bit early enough
   for the decompression step

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-24 11:49:54 +01:00
Christian Borntraeger
1bff779285 [S390] system.h: Fix compile error for 1 and 2 byte cmpxchg
commit 024914477e "memcg: move charges of anonymous
swap" revealed that the 1 byte and 2 byte cmpxchg is currently broken:

arch/s390/include/asm/system.h: Assembler messages:
arch/s390/include/asm/system.h:241: Error: junk at end of line: `(%r5)'
make[1]: *** [mm/page_cgroup.o] Error 1
make[1]: *** Waiting for unfinished jobs....

It turned out that commit 987bcdacb1 ([S390] use
inline assembly contraints available with gcc 3.3.3) broke the inline assembly.
The or operands are now in constraint 3 and 4 instead of 2 and 3.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-24 11:49:53 +01:00
Heiko Carstens
a08786568a [S390] smp: fix lowcore allocation
The intermediate lowcore for CONFIG_SMP is allocated using a call to
__alloc_bootmem() with a goal of 0. That however doesn't guarantee that
the allocated piece of memory is below 2GB.
Instead we should call __alloc_bootmem_low().

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-24 11:49:53 +01:00
Michael Holzheu
92fe31329c [S390] zcore: CPU registers are not saved under LPAR
To save the registers for all CPUs a sigp "store status" is done that
stores the registers to address absolute zero. To access storage at
absolute zero, normally the address of the prefix register of the
accessing CPU has to be used. This does not work when large pages are
active (currently only under LPAR). In order to fix that problem,
instead of memcpy memcpy_real is used, which switches to real mode
where prefixing works.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-03-24 11:49:53 +01:00
Christian Lamparter
bb45692891 [ARM] Orion5x: replace KEY_WLAN with KEY_WPS_BUTTON
"Input: add KEY_WPS_BUTTON definition" introduced
a generic keycode for WPS input events.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-03-23 13:48:15 -04:00
Christian Lamparter
9705c3961e [ARM] Kirkwood: WPS button keycode mapping
Commit "Input: add KEY_WPS_BUTTON definition"
added a generic keycode for WPS button.
Let's use it, instead of "F1" mapping.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-03-23 13:48:14 -04:00
Russell King
4f4669ee73 Merge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 2010-03-23 08:18:25 +00:00
Paul Mundt
4e1a259409 sh: Silence unintialized variable warnings in dwarf unwinder.
The parent rb_node needs to be initialized to shut up the compiler, even
though we're unlikely to ever hit this issue at run time.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23 17:07:41 +09:00
Paul Mundt
90851c4076 sh: Tidy up a couple of section mismatches.
select_idle_routine() and register_sh_pmu() both needed their annotations
fixed up to silence section mismatch warnings.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23 17:06:47 +09:00
Matt Fleming
3fe0f36c7e sh: Fix build after dynamic PMB rework
set_pmb_entry() is now only used by a function that is wrapped in #ifdef
CONFIG_PM, so wrap set_pmb_entry() in CONFIG_PM too.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23 13:37:03 +09:00
Matt Fleming
b5b6c7eea1 sh: Replace unsafe manipulation of MMUCR
Setting the TI in MMUCR causes all the TLB bits in MMUCR to be
cleared. Unfortunately, the TLB wired bits are also cleared when setting
the TI bit, causing any wired TLB entries to become unwired.

Use local_flush_tlb_all() which implements TLB flushing in a safer
manner by using the memory-mapped TLB registers. As each CPU has its own
PMB the modifications in pmb_init() only affect the local CPU, so only
flush the local CPU's TLB.

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23 13:36:21 +09:00
Matt Fleming
a9eb4f6d1a sh: Flush ITLB too in PTEAEX's flush_tlb_page()
flush_tlb_page() can be used to flush TLB entries that map executable
pages. Therefore, we need to ensure that the ITLB is also flushed in
local_flush_tlb_page().

Signed-off-by: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23 13:36:15 +09:00
Andreas Bombe
685abecfc2 sh64: Remove long unused mid_sched macro
interruptible_sleep_on() is referenced for use in the mid_sched macro
which is not used anywhere.  Remove reference and macro as well as the
comment which appears to belong with them.

Signed-off-by: Andreas Bombe <aeb@debian.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23 13:35:39 +09:00
Kuninori Morimoto
67eaa3e4fb sh: Add watch-dog register address for SH7722/SH7723/SH7724
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23 13:19:36 +09:00
Kuninori Morimoto
bec9fb072f sh: ms7724: Add tiny-document for sound
Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23 13:19:34 +09:00
Kuninori Morimoto
b230eb32c8 sh: mach-ecovec24: Add i2c_put_adapter on sh_eth_init
i2c_put_adapter is needed after i2c_get_adapter

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-23 13:19:31 +09:00
Tony Lindgren
b3c7740a12 Merge branch 'omap-fixes-for-tony' of git://dev.omapzoom.org/pub/scm/saaguirre/linux-omap-camera into omap-fixes-for-linus 2010-03-22 14:06:38 -07:00
Rafael J. Wysocki
a90110c610 x86 / perf: Fix suspend to RAM on HP nx6325
Commit 3f6da39053
(perf: Rework and fix the arch CPU-hotplug hooks) broke suspend to
RAM on my HP nx6325 (and most likely on other AMD-based boxes too)
by allowing amd_pmu_cpu_offline() to be executed for CPUs that are
going offline as part of the suspend process.  The problem is that
cpuhw->amd_nb may be NULL already, so the function should make sure
it's not NULL before accessing the object pointed to by it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-22 09:57:19 -07:00
Daniel Mack
fe3ebaad32 [ARM] pxa/raumfeld: fix button name
This fixes a warning when booting 2.6.34-rc2:

[   26.619814] ------------[ cut here ]------------
[   26.624604] WARNING: at fs/proc/generic.c:316 __xlate_proc_name+0xac/0xc0()
[   26.631555] name 'on/off button'
[   26.634753] Modules linked in:

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22 12:03:11 +08:00
Huang Weiyi
af089f517a [ARM] pxa/raumfeld: remove duplicated #include
Remove duplicated #include('s) in
 arch/arm/mach-pxa/raumfeld.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22 12:03:10 +08:00
H Hartley Sweeten
c8c3dcb9df [ARM] locomo: fix unpaired spin_lock_irqsave
The function locomo_m62332_senddata sends a three byte i2c message to
a M62332 DAC. This entire function is guarded with a spin_lock_irqsave
at the start of the function and a spin_unlock_irqrestore at the end.

As each byte is transferred, the i2c ACK from the DAC is checked.
Currently, if the ACK is missing the function simply returns without
the unlock. It also leaves the i2c bus in an invalid state since the
last byte transferred did not have a "stop" condition and leave the
bus idle.

Fix this by adding an exit path using goto.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22 12:03:09 +08:00
H Hartley Sweeten
1b0d76cb9d [ARM] locomo: fix SPI register offset
The locomo spi registers are all defined in locomo.h as offsets
from the first spi register LOCOMO_SPI (0x60), which is itself
an offset from the locomo base address.  To correctly access
these registers LOCOMO_SPI must always be included in the
address calculation.

There are two places in locomo.c where this is not done.  The
first one, in locomo_suspend, actually results in a write to
LOCOMO_ST instead of LOCOMO_SPICT.  The second is in __locomo_probe
and results in a write to LOCOMO_MCSX2 instead of LOCOMO_SPIIE.

Fix these by including LOCOMO_SPI in the calculation.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22 12:03:08 +08:00
Eric Miao
6533be390b [ARM] pxa/sharpsl: add dependency of max1111 driver to sharpsl_pm
sharpsl_pm.c actually depends on max1111 driver being built-in when
not using legacy ssp code.

Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22 12:03:07 +08:00
Eric Miao
1fe2b6b527 [ARM] pxa: remove unnecessary 'select FB_W100' from some platforms
Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22 12:03:06 +08:00
Jonathan Cameron
ef80936f99 [ARM] pxa: remove spi cs gpio direction to avoid clash with driver
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22 12:03:06 +08:00
Eric Miao
7471f46d74 [ARM] mmp: fix for variables in uncompress.h being discarded
Due to commit:

    5de813b  ARM: Eliminate decompressor -Dstatic= PIC hack

The data section will be discarded for the decompressor, thus move the
static variables into BSS section by initializing them at run time.

Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22 12:03:05 +08:00
Jonathan Cameron
2a8ac187e0 [ARM] pxa: fix for variables in uncompress.h being discarded
Due to commit:

    5de813b  ARM: Eliminate decompressor -Dstatic= PIC hack

The data section will be discarded for the decompressor, thus move the
static variables into BSS section by initializing them at run time.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-22 12:03:04 +08:00
Russell King
48edcfcfbf ARM: Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-20 15:37:39 +00:00
Russell King
0372c38047 ARM: Fix IXP23xx build error in mach/memory.h
One to many close parens.

In file included from arch/arm/include/asm/page.h:202,
                 from include/linux/mm_types.h:15,
                 from include/linux/sched.h:63,
                 from arch/arm/kernel/asm-offsets.c:13:
arch/arm/include/asm/memory.h: In function 'virt_to_bus':
arch/arm/include/asm/memory.h:214: error: expected ';' before ')' token
arch/arm/include/asm/memory.h:214: error: expected statement before ')' token
arch/arm/include/asm/memory.h: In function 'bus_to_virt':
arch/arm/include/asm/memory.h:219: error: expected ';' before ')' token
arch/arm/include/asm/memory.h:219: error: expected statement before ')' token

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-20 15:33:09 +00:00
Linus Torvalds
e4d806377b Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  serial: sh-sci: remove duplicated #include
  sh: Export uncached helper symbols.
  sh: Fix up NUMA build for 29-bit.
  serial: sh-sci: Fix build failure for non-sh architectures.
  sh: Fix up uncached offset for legacy 29-bit mode.
  sh: Support CPU affinity masks for INTC controllers.
2010-03-19 18:16:20 -07:00
Andreas Herrmann
035a02c1e1 x86, amd: Restrict usage of c1e_idle()
Currently c1e_idle returns true for all CPUs greater than or equal to
family 0xf model 0x40. This covers too many CPUs.

Meanwhile a respective erratum for the underlying problem was filed
(#400). This patch adds the logic to check whether erratum #400
applies to a given CPU.
Especially for CPUs where SMI/HW triggered C1e is not supported,
c1e_idle() doesn't need to be used. We can check this by looking at
the respective OSVW bit for erratum #400.

Cc: <stable@kernel.org> # .32.x .33.x
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20100319110922.GA19614@alberich.amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-03-19 14:43:36 -07:00
Linus Torvalds
352d4657b2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: fix compile errors in dma-mapping-common.h
  alpha: remove trailing spaces in messages
  alpha: use __ratelimit
2010-03-19 13:49:29 -07:00
Linus Torvalds
95c46afe60 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Remove IOMMU_VMERGE config option
  powerpc: Fix swiotlb to respect the boot option
  powerpc: Do not call prink when CONFIG_PRINTK is not defined
  powerpc: Use correct ccr bit for syscall error status
  powerpc/fsl-booke: Get coherent bit from PTE
  powerpc/85xx: Make sure lwarx hint isn't set on ppc32
2010-03-19 13:42:43 -07:00
Sascha Hauer
fc300206ad i.MX51: remove NFC AXI static mapping
This area contains the Nand Flash controller registers. There
is no need to map them statically as the Nand driver uses ioremap().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-19 11:18:27 +01:00
Sascha Hauer
5443856cad i.MX51: determine silicon revision dynamically
Freescale redboot passes the silicon revision via
ATAG_REVISION. Remove this bootloader dependency by
doing the same as redboot does in the Kernel.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-19 11:18:20 +01:00
Sascha Hauer
3d1bc8626c i.MX51: map TZIC dynamically
This looks cleaner and allows us to call mx51_revision
later when we can use ioremap to determine the silicon
revision dynamically.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-19 11:05:40 +01:00
Sascha Hauer
1b6a2b2d0f i.MX51: Use correct clock for gpt
The gpt uses the ipg clock, not ipg_perclk

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-19 11:02:08 +01:00
Sascha Hauer
48fae657f0 i.MX51 Babbage: Add uncompress output
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-03-19 11:00:40 +01:00
FUJITA Tomonori
191aee58b6 powerpc: Remove IOMMU_VMERGE config option
The description says:

 Cause IO segments sent to a device for DMA to be merged virtually
 by the IOMMU when they happen to have been allocated contiguously.
 This doesn't add pressure to the IOMMU allocator. However, some
 drivers don't support getting large merged segments coming back
 from *_map_sg().

 Most drivers don't have this problem; it is safe to say Y here.

It's out of date. Long ago, drivers didn't have a way to tell IOMMUs
about their segment length limit (that is, the maximum segment length
that they can handle). So IOMMUs merged as many segments as possible
and gave too large segments to drivers.

dma_get_max_seg_size() was introduced to solve the above
problem. Device drives can use the API to tell IOMMU about the maximum
segment length that they can handle. In addition, the default limit
(64K) should be safe for everyone.

So this config option seems to be unnecessary.

Note that this config option just enables users to disable the virtual
merging by default. Users can still disable the virtual merging by the
boot parameter.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-19 16:38:16 +11:00
FUJITA Tomonori
a93272969c powerpc: Fix swiotlb to respect the boot option
powerpc initializes swiotlb before parsing the kernel boot options so
swiotlb options (e.g. specifying the swiotlb buffer size) are ignored.

Any time before freeing bootmem works for swiotlb so this patch moves
powerpc's swiotlb initialization after parsing the kernel boot
options, mem_init (as x86 does).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Becky Bruce <beckyb@kernel.crashing.org>
Tested-by: Albert Herranz <albert_herranz@yahoo.es>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-19 16:38:16 +11:00
Márton Németh
09156a7a40 powerpc: Do not call prink when CONFIG_PRINTK is not defined
When printk() is disabled (CONFIG_PRINTK) at menu item
 General setup
 -> Configure standard kernel features (for small systems)
    -> Enable support for printk
then there should be no printk() calls at all.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-19 16:38:16 +11:00
Nathan Lynch
409d241b7b powerpc: Use correct ccr bit for syscall error status
The powerpc implementations of syscall_get_error and
syscall_set_return_value should use CCR0:S0 (0x10000000) for testing
and setting syscall error status.  Fortunately these APIs don't seem
to be used at the moment.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-19 16:38:16 +11:00
Benjamin Herrenschmidt
d6a8536a93 Merge commit 'kumar/merge' into merge 2010-03-19 16:23:55 +11:00
FUJITA Tomonori
5286944d75 alpha: fix compile errors in dma-mapping-common.h
The commit c186caca3d leads to the
following errors with CONFIG_ALPHA_{TSUNAMI, TITAN, RAWHIDE, MARVEL}:
/home/fujita/git/linux-2.6/include/asm-generic/dma-mapping-common.h: In
function `dma_map_sg_attrs':
/home/fujita/git/linux-2.6/include/asm-generic/dma-mapping-common.h:49:
error: implicit declaration of function `for_each_sg'
/home/fujita/git/linux-2.6/include/asm-generic/dma-mapping-common.h:50:
error: syntax error before "kmemcheck_mark_initialized"

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reported-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-03-18 22:35:28 -04:00
Frans Pop
7f2d889c9c alpha: remove trailing spaces in messages
Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-03-18 22:34:08 -04:00
Akinobu Mita
2a238a9635 alpha: use __ratelimit
Replace open-coded rate limiting logic with __ratelimit().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-03-18 22:34:08 -04:00
Linus Torvalds
3971047930 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (96 commits)
  Blackfin: stop cleaning include/asm/asm-offsets.h
  Blackfin: scale calibration when cpu freq changes
  Blackfin: eat spurious space in asm/dpmc.h
  Blackfin: fix anomaly 283 handling with exact hardware error
  Blackfin: bf537-stamp: add example ADXL346 orientation resources
  Blackfin: bf537-stamp: add example AD2S1210 IIO resources
  Blackfin: don't support keypad wakeup from hibernate
  Blackfin: bf537-stamp: add example AD7416 IIO resources
  Blackfin: bf537-stamp: add example ADP8860 backlight/led resources
  Blackfin: bf537-stamp: add example AD7414 temp sensor resources
  Blackfin: rename AD1836 to AD183X in board files
  Blackfin: bf537-stamp: add example AD2S120x resources
  Blackfin: add support for the on-chip MAC status interrupts
  Blackfin: asm/page.h: pull in asm-generic headers
  Blackfin: mark gpio lib functions static
  Blackfin: bf537-stamp: add example ADAU1361 resources
  Blackfin: GPIO: implement to_irq handler
  Blackfin: bf537-stamp: add example ADP122/ADP150 power regulator resources
  Blackfin: bf537-stamp: add example AD2S90 resources
  Blackfin: bf537-stamp: add example AD5398 power regulator resources
  ...
2010-03-18 17:02:35 -07:00
Linus Torvalds
9d20593a72 Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6
* 'merge' of git://git.secretlab.ca/git/linux-2.6:
  powerpc/5200: Build fix for mpc52xx watchdog timer code
  of: Fix comparison of "compatible" properties
  powerpc/52xx: update defconfigs
  spi/omap2_mcspi: Use transaction speed if provided
  spi/omap2_mcspi: fix NULL pointer dereference
  uartlite: Fix build on sparc.
2010-03-18 17:01:19 -07:00
Linus Torvalds
9b59a0a4ee Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  ARM/OMAP: Remove the +x bit from a couple of source files
  omap: McBSP: Drop unnecessary status/error bit clearing on reg_cacheretrieved register values
  OMAP4: fix temporary hacks that break multi-omap PM
  OMAP2: cpu_is_omap2*: fix compile-time removal of unused code
  omap3: pandora: add missing i2c3 board_info
  omap: mach-omap2/io.c: fix function declarations
  omap: Fix gpio_resume_after_retention
  omap3: Fix support for the LEDs connected to GPIO outputs on IGEP v2board
  omap: Checkpatch cleanup for blizzard.h
  omap: pass the reboot command to the boot loader
  omap2/3/4: mailbox: remove compiler warning
  OMAP2: serial.c: Fix number of uarts in early_init
  omap: Enable PM_RUNTIME in defconfigs to avoid USB compile errors
  omap2: Update n8x0 defconfig to test multi-omap and DMA api changes
  omap2: add USB initialization for tusb6010
  omap4: Fix build break by moving omap_smc1 into a separate .S
  omap2/3/4: ehci: avoid compiler error with touchbook
  omap3: Fix compile for Touch Book early_param
2010-03-18 16:59:30 -07:00
Linus Torvalds
c3a0bd7515 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm: (23 commits)
  ARM: Fix RiscPC decompressor build errors
  ARM: Fix sorting of platform group config options and includes
  ARM: 5991/1: Fix regression in restore_user_regs macro
  ARM: 5989/1: ARM: KGDB: add support for SMP platforms
  ARM: 5990/1: ARM: use __armv5tej_mmu_cache_flush for V5TEJ instead of __armv4_mmu_cache_flush
  ARM: Add final piece to fix XIP decompressor in read-only memory
  video: enable sh_mobile_lcdc on SH-Mobile ARM
  ARM: mach-shmobile: ap4evb SDHI0 platform data V2
  ARM: mach-shmobile: sh7372 SDHI vector merge
  ARM: mach-shmobile: sh7377 SDHI vector merge
  ARM: mach-shmobile: sh7367 SDHI vector merge
  ARM: mach-shmobile: G4EVM KEYSC platform data
  mtd: enable sh_flctl on SH-Mobile ARM
  ARM: mach-shmobile: G3EVM FLCTL platform data
  ARM: mach-shmobile: G3EVM KEYSC platform data
  Video: ARM CLCD: Better fix for swapped IENB and CNTL registers
  ARM: Add L2 cache handling to smp boot support
  ARM: 5960/1: ARM: perf-events: fix v7 event selection mask
  ARM: 5959/1: ARM: perf-events: request PMU interrupts with IRQF_NOBALANCING
  ARM: 5988/1: pgprot_dmacoherent() for non-mmu builds
  ...
2010-03-18 16:59:10 -07:00
Linus Torvalds
a41842f70d Merge branch 'for-linus/samsung-fixes' of git://git.fluff.org/bjdooks/linux
* 'for-linus/samsung-fixes' of git://git.fluff.org/bjdooks/linux:
  ARM: SAMSUNG: Fixup commit 4e6d488af3
  ARM: SAMSUNG: Fix build error from stale define in <plat/uncompress.h>
  ARM: SAMSUNG: Add suspend/resume support for S3C PWM driver
  ARM: S3C2440: Fix s3c2440 cpufreq compilation post move.
2010-03-18 16:58:42 -07:00
Linus Torvalds
722874465e Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (27 commits)
  microblaze: entry.S use delay slot for return handlers
  microblaze: Save current task directly
  microblaze: Simplify entry.S - save/restore r3/r4 - ret_from_trap
  microblaze: PCI early support for noMMU system
  microblaze: Fix dma alloc and free coherent dma functions
  microblaze: Add consistent code
  microblaze: pgtable.h: move consistent functions
  microblaze: Remove ancient Kconfig option for consistent mapping
  microblaze: Remove VMALLOC_VMADDR
  microblaze: Add define for ASM_LOOP
  microblaze: Preliminary support for dma drivers
  microblaze: remove trailing space in messages
  microblaze: Use generic show_mem()
  microblaze: Change temp register for cmdline
  microblaze: Preliminary support for dma drivers
  microblaze: Move cache function to cache.c
  microblaze: Add support from PREEMPT
  microblaze: Add support for Xilinx PCI host bridge
  microblaze: Enable PCI, missing files
  microblaze: Add core PCI files
  ...
2010-03-18 16:57:24 -07:00
Linus Torvalds
f82c37e7bb Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (35 commits)
  perf: Fix unexported generic perf_arch_fetch_caller_regs
  perf record: Don't try to find buildids in a zero sized file
  perf: export perf_trace_regs and perf_arch_fetch_caller_regs
  perf, x86: Fix hw_perf_enable() event assignment
  perf, ppc: Fix compile error due to new cpu notifiers
  perf: Make the install relative to DESTDIR if specified
  kprobes: Calculate the index correctly when freeing the out-of-line execution slot
  perf tools: Fix sparse CPU numbering related bugs
  perf_event: Fix oops triggered by cpu offline/online
  perf: Drop the obsolete profile naming for trace events
  perf: Take a hot regs snapshot for trace events
  perf: Introduce new perf_fetch_caller_regs() for hot regs snapshot
  perf/x86-64: Use frame pointer to walk on irq and process stacks
  lockdep: Move lock events under lockdep recursion protection
  perf report: Print the map table just after samples for which no map was found
  perf report: Add multiple event support
  perf session: Change perf_session post processing functions to take histogram tree
  perf session: Add storage for seperating event types in report
  perf session: Change add_hist_entry to take the tree root instead of session
  perf record: Add ID and to recorded event data when recording multiple events
  ...
2010-03-18 16:52:46 -07:00
Grant Likely
9205124c66 powerpc/5200: Build fix for mpc52xx watchdog timer code
mpc52xx_gpt_wdt_setup is defined as 0, which causes the following build
failure with gcc 4.5, since it's built with -Werror.

arch/powerpc/platforms/52xx/mpc52xx_gpt.c:761:3: error: statement with no effect

Changing it to a static inline fixes the problem.

Reported-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-03-18 08:20:17 -06:00
Paul Mackerras
9eff26ea48 powerpc/perf_events: Fix call-graph recording, add perf_arch_fetch_caller_regs
This implements a powerpc version of perf_arch_fetch_caller_regs
to get correct call-graphs.

It's implemented in assembly because that way we can be sure there isn't
a stack frame for perf_arch_fetch_caller_regs.  If it was in C, gcc might
or might not create a stack frame for it, which would affect the number
of levels we have to skip.

With this, we see results from perf record -e lock:lock_acquire like
this:

 # Samples: 24878
 #
 # Overhead         Command      Shared Object  Symbol
 # ........  ..............  .................  ......
 #
    14.99%            perf  [kernel.kallsyms]  [k] ._raw_spin_lock
                      |
                      --- ._raw_spin_lock
                         |
                         |--25.00%-- .alloc_fd
                         |          (nil)
                         |          |
                         |          |--50.00%-- .anon_inode_getfd
                         |          |          .sys_perf_event_open
                         |          |          syscall_exit
                         |          |          syscall
                         |          |          create_counter
                         |          |          __cmd_record
                         |          |          run_builtin
                         |          |          main
                         |          |          0xfd2e704
                         |          |          0xfd2e8c0
                         |          |          (nil)

... etc.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: anton@samba.org
Cc: linuxppc-dev@ozlabs.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100318050513.GA6575@drongo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-18 06:48:29 +01:00
Frederic Weisbecker
dcd5c1662d perf: Fix unexported generic perf_arch_fetch_caller_regs
perf_arch_fetch_caller_regs() is exported for the overriden x86
version, but not for the generic weak version.

As a general rule, weak functions should not have their symbol
exported in the same file they are defined.

So let's export it on trace_event_perf.c as it is used by trace
events only.

This fixes:

	ERROR: ".perf_arch_fetch_caller_regs" [fs/xfs/xfs.ko] undefined!
	ERROR: ".perf_arch_fetch_caller_regs" [arch/powerpc/platforms/cell/spufs/spufs.ko] undefined!

-v2: And also only build it if trace events are enabled.
-v3: Fix changelog mistake

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1268697902-9518-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-17 12:26:49 +01:00
Kumar Gala
9d296cfa69 powerpc/fsl-booke: Get coherent bit from PTE
We shouldn't be always setting 'M' in the TLB entry since its reasonable
for somethings to be mapped non-coherent.  The PTE should have 'M' set
properly.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-03-16 23:39:56 -05:00
Kumar Gala
d6ccb1f55d powerpc/85xx: Make sure lwarx hint isn't set on ppc32
e500v1/v2 based chips will treat any reserved field being set in an
opcode as illegal.  Thus always setting the hint in the opcode is
a bad idea.

Anton should be kept away from the powerpc opcode map.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-03-16 23:24:06 -05:00
Jan Beulich
ff30a0543e x86: Fix placement of FIX_OHCI1394_BASE
Ever for 32-bit with sufficiently high NR_CPUS, and starting
with commit 789d03f584 also for
64-bit, the statically allocated early fixmap page tables were
not covering FIX_OHCI1394_BASE, leading to a boot time crash
when "ohci1394_dma=early" was used. Despite this entry not being
a permanently used one, it needs to be moved into the permanent
range since it has to be close to FIX_DBGP_BASE and
FIX_EARLYCON_MEM_BASE.

Reported-bisected-and-tested-by: Justin P. Mattock <justinmattock@gmail.com>
Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=14487
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: <stable@kernel.org> # [as far back as long as it still applies]
LKML-Reference: <4B9E15D30200007800034D23@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-16 11:16:27 +01:00
Suresh Siddha
36e9e1eab7 x86: Handle legacy PIC interrupts on all the cpu's
Ingo Molnar reported that with the recent changes of not
statically blocking IRQ0_VECTOR..IRQ15_VECTOR's on all the
cpu's, broke an AMD platform (with Nvidia chipset) boot when
"noapic" boot option is used.

On this platform, legacy PIC interrupts are getting delivered to
all the cpu's instead of just the boot cpu. Thus not
initializing the vector to irq mapping for the legacy irq's
resulted in not handling certain interrupts causing boot hang.

Fix this by initializing the vector to irq mapping on all the
logical cpu's, if the legacy IRQ is handled by the legacy PIC.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
[ -v2: io-apic-enabled improvement ]
Acked-by: Yinghai Lu <yinghai@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <1268692386.3296.43.camel@sbs-t61.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-16 06:36:35 +01:00
Ben Dooks
0e17226f7c ARM: SAMSUNG: Fixup commit 4e6d488af3
Commit 4e6d488af3 either missed out the
following machine files or somehow managed to clash between merges.

Fixup the three files missing the second parameter to addruart macro
to allow them to build.

Fixes the following warnings in arch/arm/kernel/debug.c:
arch/arm/kernel/debug.S: Assembler messages:
arch/arm/kernel/debug.S:167: Error: too many positional arguments
arch/arm/kernel/debug.S:183: Error: too many positional arguments

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-15 23:11:41 +00:00
Ben Dooks
65e543f12c ARM: SAMSUNG: Fix build error from stale define in <plat/uncompress.h>
The decleration of error() as static in the platform specific uncompress
code in  arch/arm/plat-samsung/include/plat/uncomopress.h causes the build
of the uncompressor to break. Remove it, as it is no longer needed.

arch/arm/boot/compressed/decompress.o: In function `gunzip':
/var/tmp/kernel-orig/arch/arm/boot/compressed/../../../../lib/decompress_inflate.c:67: undefined reference to `error'
/var/tmp/kernel-orig/arch/arm/boot/compressed/../../../../lib/decompress_inflate.c:73: undefined reference to `error'
/var/tmp/kernel-orig/arch/arm/boot/compressed/../../../../lib/decompress_inflate.c:80: undefined reference to `error'
/var/tmp/kernel-orig/arch/arm/boot/compressed/../../../../lib/decompress_inflate.c:95: undefined reference to `error'
/var/tmp/kernel-orig/arch/arm/boot/compressed/../../../../lib/decompress_inflate.c:152: undefined reference to `error'

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-15 22:57:18 +00:00
Vasily Khoruzhick
e79032aa75 ARM: SAMSUNG: Add suspend/resume support for S3C PWM driver
Reset period_ns and duty_ns values in suspend handler to avoid skip of
configuration if same values passed to pwm_config;
Restore invertion bit in resume handler.

Without this patch PWM works incorrectly after resume from suspend.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-15 22:43:33 +00:00
Vasily Khoruzhick
664e87e47e ARM: S3C2440: Fix s3c2440 cpufreq compilation post move.
Fix compilation issue by moving s3c2440-cpufreq.c into mach-s3c2440 directory

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-03-15 22:43:12 +00:00
Russell King
0d5e6f7ae8 ARM: Fix RiscPC decompressor build errors
arch/arm/boot/compressed/decompress.o: In function `do_decompress':
decompress.c:(.text+0x26e8): undefined reference to `error'
decompress.c:(.text+0x2760): undefined reference to `error'
decompress.c:(.text+0x27d8): undefined reference to `error'
decompress.c:(.text+0x2824): undefined reference to `error'
decompress.c:(.text+0x28f0): undefined reference to `error'

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-15 22:04:54 +00:00
Sergio Aguirre
e6e8ea63f5 omap3: zoom2/3: Register only 1 8250 port
There's no more serial ports available, so, doesn't make sense
to create 4 device nodes.

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
2010-03-15 16:34:22 -05:00
Sergio Aguirre
fcbcea93ab omap3: zoom 2/3: Change debugboard serial port id
This is now changed to PLAT8250_DEV_PLATFORM (= 0), because
it's the only port that's going to be initialized in
Zoom 2/3 boards.

So, it doesn't make sense to keep the hardcoded 3 value anymore.

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
2010-03-15 16:34:20 -05:00
Sergio Aguirre
9e265aa7ac omap3: 3630sdp: Explicitly enable all UARTs
All UARTs seem physically reachable, so, enable them all.

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
2010-03-15 16:34:19 -05:00
Sergio Aguirre
2d7f66104c omap3: zoom2/3 / 3630sdp: Don't init always all uarts
This is useless, since in Zoom2/3 boards, the ports aren't even
physically accessible.

They must be explicitly initted in the board-zoom2.c, board-zoom3.c
and board-3630sdp.c files instead.

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
2010-03-15 16:34:17 -05:00
Sergio Aguirre
4b1bbd3fd9 omap2/3/4: serial: Remove condition for getting uart4_phys
This check is invalid, since we haven't filled the
omap_revision var at this point.

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
2010-03-15 16:34:16 -05:00
Sergio Aguirre
10c805eb4f OMAP3: serial: Use dev_* macros instead of printk
As we have a struct device populated at the time we are
printing the errors, using dev_* macros makes more sense,
as could give a better idea where the error/warning came from.

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
2010-03-15 16:34:12 -05:00
Sergio Aguirre
e88d556dc5 OMAP3: serial: Check for zero-based physical addr
This is for protecting a wrong mapping attempt of a zero-based
physical address.

The result is that, no serial port will be attempted to be mapped.

Also add an additional protection for NULL clocks before attempting
to enable them (if above condition applies)

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
2010-03-15 16:33:31 -05:00
Russell King
ccf50e2341 ARM: Fix sorting of platform group config options and includes
... and document the sorting criteria to help future additions.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-15 19:03:06 +00:00
Anders Grafström
8e4971f2fb ARM: 5991/1: Fix regression in restore_user_regs macro
ARMv5T and earlier require that a ldm {}^ instruction is not followed
by an instruction that accesses banked registers. This patch restores
the nop that was lost in commit b86040a59f.

Signed-off-by: Anders Grafström <grfstrm@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-15 17:20:08 +00:00
Will Deacon
5d8614cc5d ARM: 5989/1: ARM: KGDB: add support for SMP platforms
To support SMP platforms, KGDB requires the architecture backend to
implement the kgdb_roundup_cpus function.

This patch, taken against 2.6.33, implements the function for ARM based
on the MIPS port.

Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Jean-Michel Hautbois <jhautbois@gmail.com>
Cc: KGDB Mailing List <kgdb-bugreport@lists.sourceforge.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-15 14:33:04 +00:00
Sascha Hauer
75216859d9 ARM: 5990/1: ARM: use __armv5tej_mmu_cache_flush for V5TEJ instead of __armv4_mmu_cache_flush
This got broken with commit 0e056f20

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-15 14:32:02 +00:00
Russell King
b89ebadc34 ARM: Add final piece to fix XIP decompressor in read-only memory
This defines STATIC_RW_DATA, which prevents the read/write malloc
management data being declared with a static attribute.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-15 14:29:22 +00:00
Russell King
2d3b5fa3a3 Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6 2010-03-15 14:27:06 +00:00
Linus Torvalds
a3d3203e4b Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (34 commits)
  ACPI: processor: push file static MADT pointer into internal map_madt_entry()
  ACPI: processor: refactor internal map_lsapic_id()
  ACPI: processor: refactor internal map_x2apic_id()
  ACPI: processor: refactor internal map_lapic_id()
  ACPI: processor: driver doesn't need to evaluate _PDC
  ACPI: processor: remove early _PDC optin quirks
  ACPI: processor: add internal processor_physically_present()
  ACPI: processor: move acpi_get_cpuid into processor_core.c
  ACPI: processor: export acpi_get_cpuid()
  ACPI: processor: mv processor_pdc.c processor_core.c
  ACPI: processor: mv processor_core.c processor_driver.c
  ACPI: plan to delete "acpi=ht" boot option
  ACPI: remove "acpi=ht" DMI blacklist
  PNPACPI: add bus number support
  PNPACPI: add window support
  resource: add window support
  resource: add bus number support
  resource: expand IORESOURCE_TYPE_BITS to make room for bus resource type
  acpiphp: Execute ACPI _REG method for hotadded devices
  ACPI video: Be more liberal in validating _BQC behaviour
  ...
2010-03-14 20:29:21 -07:00
Wolfram Sang
f937331b3f init dynamic bin_attribute structures
Commit 6992f53349 ("sysfs: Use one lockdep
class per sysfs attribute.") introduced this requirement.  First, at25
was fixed manually.  Then, other occurences were found with coccinelle
and the following semantic patch.  Results were reviewed and fixed up:

    @ init @
    identifier struct_name, bin;
    @@

    	struct struct_name {
    		...
    		struct bin_attribute bin;
    		...
    	};

    @ main extends init @
    expression E;
    statement S;
    identifier name, err;
    @@

    (
    	struct struct_name *name;
    |
    -	struct struct_name *name = NULL;
    +	struct struct_name *name;
    )
    	...
    (
    	sysfs_bin_attr_init(&name->bin);
    |
    +	sysfs_bin_attr_init(&name->bin);
    	if (sysfs_create_bin_file(E, &name->bin))
    		S
    |
    +	sysfs_bin_attr_init(&name->bin);
    	err = sysfs_create_bin_file(E, &name->bin);
    )

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-14 20:28:39 -07:00
Magnus Damm
3a14d03977 ARM: mach-shmobile: ap4evb SDHI0 platform data V2
Add SDHI0 platform data for the AP4EVB board V2.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15 12:06:47 +09:00
Magnus Damm
c57a31abf0 ARM: mach-shmobile: sh7372 SDHI vector merge
Merge the SDHI vectors for sh7372 using the recently
merged INTC force_enable/disable feature.

With this in place SDHI hotplug is supported using
the drivers sh_mobile_sdhi and tmio_mmc.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15 12:06:46 +09:00
Magnus Damm
c148abfc2d ARM: mach-shmobile: sh7377 SDHI vector merge
Merge the SDHI vectors for sh7377 using the recently
merged INTC force_enable/disable feature.

With this in place SDHI hotplug is supported using
the drivers sh_mobile_sdhi and tmio_mmc.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15 12:06:46 +09:00
Magnus Damm
9615b37c5c ARM: mach-shmobile: sh7367 SDHI vector merge
Merge the SDHI vectors for sh7367 using the recently
merged INTC force_enable/disable feature.

With this in place SDHI hotplug is supported using
the drivers sh_mobile_sdhi and tmio_mmc.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15 12:06:45 +09:00
NISHIMOTO Hiroki
6676a1701b ARM: mach-shmobile: G4EVM KEYSC platform data
This patch adds KEYSC platform data for the G4EVM board.

Signed-off-by: NISHIMOTO Hiroki <nishimoto.hiroki@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15 12:06:45 +09:00
Magnus Damm
143f3b833f ARM: mach-shmobile: G3EVM FLCTL platform data
This patch adds FLCTL platform data for the G3EVM board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15 11:13:14 +09:00
Magnus Damm
03fb256df9 ARM: mach-shmobile: G3EVM KEYSC platform data
This patch adds KEYSC platform data for the G3EVM board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-15 11:13:13 +09:00
Len Brown
ec28dcc6b4 Merge branches 'battery-2.6.34', 'bugzilla-10805', 'bugzilla-14668', 'bugzilla-531916-power-state', 'ht-warn-2.6.34', 'pnp', 'processor-rename', 'sony-2.6.34', 'suse-bugzilla-531547', 'tz-check', 'video' and 'misc-2.6.34' into release 2010-03-14 21:30:17 -04:00
Alex Chiang
d8191fa4a3 ACPI: processor: driver doesn't need to evaluate _PDC
Now that the early _PDC evaluation path knows how to correctly
evaluate _PDC on only physically present processors, there's no
need for the processor driver to evaluate it later when it loads.

To cover the hotplug case, push _PDC evaluation down into the
hotplug paths.

Cc: x86@kernel.org
Cc: Tony Luck <tony.luck@intel.com>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14 21:17:22 -04:00
Len Brown
4c81ba4900 ACPI: plan to delete "acpi=ht" boot option
Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14 20:58:24 -04:00
Len Brown
8144c88039 ACPI: remove "acpi=ht" DMI blacklist
SuSE added these entries when deploying ACPI in Linux-2.4.
I pulled them into Linux-2.6 on 2003-08-09.
Over the last 6+ years, several entries have proven to be
unnecessary and deleted, while no new entries have been added.
Matthew suggests that they now have negative value, and I agree.

Based-on-patch-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-03-14 20:57:02 -04:00
Russell King
1027247f6e ARM: Add L2 cache handling to smp boot support
The page table and secondary data which we're asking the secondary CPU
to make use of has to hit RAM to ensure that the secondary CPU can see
it since it may not be taking part in coherency or cache searches at
this point.

Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-14 19:42:35 +00:00
Ingo Molnar
2aa2b50dd6 x86/mce: Fix build bug with CONFIG_PROVE_LOCKING=y && CONFIG_X86_MCE_INTEL=y
Commit f56e8a076 "x86/mce: Fix RCU lockdep splats" introduced the
following build bug:

  arch/x86/kernel/cpu/mcheck/mce.c: In function 'mce_log':
  arch/x86/kernel/cpu/mcheck/mce.c:166: error: 'mce_read_mutex' undeclared (first use in this function)
  arch/x86/kernel/cpu/mcheck/mce.c:166: error: (Each undeclared identifier is reported only once
  arch/x86/kernel/cpu/mcheck/mce.c:166: error: for each function it appears in.)

Move the in-the-middle-of-file lock variable up to the variable
definition section, the top of the .c file.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1267830207-9474-3-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-14 08:57:03 +01:00
Linus Torvalds
80a186074e Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix pick_next_highest_task_rt() for cgroups
  sched: Cleanup: remove unused variable in try_to_wake_up()
  x86: Fix sched_clock_cpu for systems with unsynchronized TSC
2010-03-13 14:46:18 -08:00
Linus Torvalds
15c989d4d1 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, k8 nb: Fix boot crash: enable k8_northbridges unconditionally on AMD systems
  x86, UV: Fix target_cpus() in x2apic_uv_x.c
  x86: Reduce per cpu warning boot up messages
  x86: Reduce per cpu MCA boot up messages
  x86_64, cpa: Don't work hard in preserving kernel 2M mappings when using 4K already
2010-03-13 14:45:49 -08:00
Linus Torvalds
4e3eaddd14 Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  locking: Make sparse work with inline spinlocks and rwlocks
  x86/mce: Fix RCU lockdep splats
  rcu: Increase RCU CPU stall timeouts if PROVE_RCU
  ftrace: Replace read_barrier_depends() with rcu_dereference_raw()
  rcu: Suppress RCU lockdep warnings during early boot
  rcu, ftrace: Fix RCU lockdep splat in ftrace_perf_buf_prepare()
  rcu: Suppress __mpol_dup() false positive from RCU lockdep
  rcu: Make rcu_read_lock_sched_held() handle !PREEMPT
  rcu: Add control variables to lockdep_rcu_dereference() diagnostics
  rcu, cgroup: Relax the check in task_subsys_state() as early boot is now handled by lockdep-RCU
  rcu: Use wrapper function instead of exporting tasklist_lock
  sched, rcu: Fix rcu_dereference() for RCU-lockdep
  rcu: Make task_subsys_state() RCU-lockdep checks handle boot-time use
  rcu: Fix holdoff for accelerated GPs for last non-dynticked CPU
  x86/gart: Unexport gart_iommu_aperture

Fix trivial conflicts in kernel/trace/ftrace.c
2010-03-13 14:43:01 -08:00
Linus Torvalds
9fdfbc2bff Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Provide generic perf_sample_data initialization
  MAINTAINERS: Add Arnaldo as tools/perf/ co-maintainer
  perf trace: Don't use pager if scripting
  perf trace/scripting: Remove extraneous header read
  perf, ARM: Modify kuser rmb() call to compile for Thumb-2
  x86/stacktrace: Don't dereference bad frame pointers
  perf archive: Don't try to collect files without a build-id
  perf_events, x86: Fixup fixed counter constraints
  perf, x86: Restrict the ANY flag
  perf, x86: rename macro in ARCH_PERFMON_EVENTSEL_ENABLE
  perf, x86: add some IBS macros to perf_event.h
  perf, x86: make IBS macros available in perf_event.h
  hw-breakpoints: Remove stub unthrottle callback
  x86/hw-breakpoints: Remove the name field
  perf: Remove pointless breakpoint union
  perf lock: Drop the buffers multiplexing dependency
  perf lock: Fix and add misc documentally things
  percpu: Add __percpu sparse annotations to hw_breakpoint
2010-03-13 14:39:42 -08:00
Will Deacon
d10fca9f39 ARM: 5960/1: ARM: perf-events: fix v7 event selection mask
The event selection mask for ARMv7 cores [ARMV7_EVTSEL_MASK]
is incorrectly set to 0x7f. This means that the top bit of an
event ID is ignored, so counting branch misses (id=0x10) and
ISBs (id=0x90) give the same results.

This patch sets the event selection mask to the correct value
of 0xff.

Signed-off-by: Jean Pihet <jpihet@mvista.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-13 10:50:29 +00:00
Will Deacon
ddee87f208 ARM: 5959/1: ARM: perf-events: request PMU interrupts with IRQF_NOBALANCING
If IRQ balancing is used on a multicore ARM system, PMU interrupt
lines may be relocated onto CPUs other than the one causing the
counter overflow. This can result in misattribution of events to
the wrong core and, in the case that the CPU handling the interrupt
has not experience counter overflow, the interrupt can be disabled
because the handler returns IRQ_NONE.

This patch adds the IRQF_NOBALANCING flag to the request_irq call
in perf_events.c.

Acked-by: Jamie Iles <jamie.iles@picochip.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-13 10:50:28 +00:00
Greg Ungerer
a91ed072d6 ARM: 5988/1: pgprot_dmacoherent() for non-mmu builds
Commit 26a26d3296 ("dma-mapping: switch
ARMv7 DMA mappings to retain 'memory' attribute") added a new macro,
pgprot_dmacoherent(), to correctly map DMA memory. The non-mmu pgtable
support code also needs to implement this macro, otherwise when
compiling you get:

  CC      arch/arm/mm/dma-mapping.o
arch/arm/mm/dma-mapping.c: In function 'dma_alloc_coherent':
arch/arm/mm/dma-mapping.c:320: error: implicit declaration of function 'pgprot_dmacoherent'
arch/arm/mm/dma-mapping.c:320: error: 'pgprot_kernel' undeclared (first use in this function)
arch/arm/mm/dma-mapping.c:320: error: (Each undeclared identifier is reported only once
arch/arm/mm/dma-mapping.c:320: error: for each function it appears in.)

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-13 10:48:22 +00:00