totalram_pages, zone->managed_pages and totalhigh_pages updates are
protected by managed_page_count_lock, but readers never care about it.
Convert these variables to atomic to avoid readers potentially seeing a
store tear.
This patch converts zone->managed_pages. Subsequent patches will convert
totalram_panges, totalhigh_pages and eventually managed_page_count_lock
will be removed.
Main motivation was that managed_page_count_lock handling was complicating
things. It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.
Link: http://lkml.kernel.org/r/1542090790-21750-3-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: convert totalram_pages, totalhigh_pages and managed
pages to atomic", v5.
This series converts totalram_pages, totalhigh_pages and
zone->managed_pages to atomic variables.
totalram_pages, zone->managed_pages and totalhigh_pages updates are
protected by managed_page_count_lock, but readers never care about it.
Convert these variables to atomic to avoid readers potentially seeing a
store tear.
Main motivation was that managed_page_count_lock handling was complicating
things. It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 It seemes better
to remove the lock and convert variables to atomic. With the change,
preventing poteintial store-to-read tearing comes as a bonus.
This patch (of 4):
This is in preparation to a later patch which converts totalram_pages and
zone->managed_pages to atomic variables. Please note that re-reading the
value might lead to a different value and as such it could lead to
unexpected behavior. There are no known bugs as a result of the current
code but it is better to prevent from them in principle.
Link: http://lkml.kernel.org/r/1542090790-21750-2-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
per_cpu_pageset is cleared by memset, it is not necessary to reset it
again.
Link: http://lkml.kernel.org/r/20181021023920.5501-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Per-cpu numa_node provides a default node for each possible cpu. The
association gets initialized during the boot when the architecture
specific code explores cpu->NUMA affinity. When the whole NUMA node is
removed though we are clearing this association
try_offline_node
check_and_unmap_cpu_on_node
unmap_cpu_on_node
numa_clear_node
numa_set_node(cpu, NUMA_NO_NODE)
This means that whoever calls cpu_to_node for a cpu associated with such a
node will get NUMA_NO_NODE. This is problematic for two reasons. First
it is fragile because __alloc_pages_node would simply blow up on an
out-of-bound access. We have encountered this when loading kvm module
BUG: unable to handle kernel paging request at 00000000000021c0
IP: __alloc_pages_nodemask+0x93/0xb70
PGD 800000ffe853e067 PUD 7336bbc067 PMD 0
Oops: 0000 [#1] SMP
[...]
CPU: 88 PID: 1223749 Comm: modprobe Tainted: G W 4.4.156-94.64-default #1
RIP: __alloc_pages_nodemask+0x93/0xb70
RSP: 0018:ffff887354493b40 EFLAGS: 00010202
RAX: 00000000000021c0 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000002 RDI: 00000000014000c0
RBP: 00000000014000c0 R08: ffffffffffffffff R09: 0000000000000000
R10: ffff88fffc89e790 R11: 0000000000014000 R12: 0000000000000101
R13: ffffffffa0772cd4 R14: ffffffffa0769ac0 R15: 0000000000000000
FS: 00007fdf2f2f1700(0000) GS:ffff88fffc880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000021c0 CR3: 00000077205ee000 CR4: 0000000000360670
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
alloc_vmcs_cpu+0x3d/0x90 [kvm_intel]
hardware_setup+0x781/0x849 [kvm_intel]
kvm_arch_hardware_setup+0x28/0x190 [kvm]
kvm_init+0x7c/0x2d0 [kvm]
vmx_init+0x1e/0x32c [kvm_intel]
do_one_initcall+0xca/0x1f0
do_init_module+0x5a/0x1d7
load_module+0x1393/0x1c90
SYSC_finit_module+0x70/0xa0
entry_SYSCALL_64_fastpath+0x1e/0xb7
DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x1e/0xb7
on an older kernel but the code is basically the same in the current Linus
tree as well. alloc_vmcs_cpu could use alloc_pages_nodemask which would
recognize NUMA_NO_NODE and use alloc_pages_node which would translate it
to numa_mem_id but that is wrong as well because it would use a cpu
affinity of the local CPU which might be quite far from the original node.
It is also reasonable to expect that cpu_to_node will provide a sane
value and there might be many more callers like that.
The second problem is that __register_one_node relies on cpu_to_node to
properly associate cpus back to the node when it is onlined. We do not
want to lose that link as there is no arch independent way to get it from
the early boot time AFAICS.
Drop the whole check_and_unmap_cpu_on_node machinery and keep the
association to fix both issues. The NODE_DATA(nid) is not deallocated so
it will stay in place and if anybody wants to allocate from that node then
a fallback node will be used.
Thanks to Vlastimil Babka for his live system debugging skills that helped
debugging the issue.
Link: http://lkml.kernel.org/r/20181108100413.966-1-mhocko@kernel.org
Fixes: e13fe8695c ("cpu-hotplug,memory-hotplug: clear cpu_to_node() when offlining the node")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Debugged-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should get rid of this function. It no longer serves its purpose.
This is a historical artifact from 2005 where do_brk was called outside of
the core mm. We do have a proper abstraction in vm_brk_flags and that one
does the locking properly so there is no need to use this function.
Link: http://lkml.kernel.org/r/20181108174856.10811-1-tiny.windzz@gmail.com
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace jhash2 with xxhash.
Perf numbers:
Intel(R) Xeon(R) CPU E5-2420 v2 @ 2.20GHz
ksm: crc32c hash() 12081 MB/s
ksm: xxh64 hash() 8770 MB/s
ksm: xxh32 hash() 4529 MB/s
ksm: jhash2 hash() 1569 MB/s
Sioh Lee did some testing:
crc32c_intel: 1084.10ns
crc32c (no hardware acceleration): 7012.51ns
xxhash32: 2227.75ns
xxhash64: 1413.16ns
jhash2: 5128.30ns
As jhash2 always will be slower (for data size like PAGE_SIZE). Don't use
it in ksm at all.
Use only xxhash for now, because for using crc32c, cryptoapi must be
initialized first - that requires some tricky solution to work well in all
situations.
Link: http://lkml.kernel.org/r/20181023182554.23464-3-nefelim4ag@gmail.com
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Signed-off-by: leesioh <solee@os.korea.ac.kr>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Currently used jhash are slow enough and replace it allow as
to make KSM", v8.
Apeed (in kernel):
ksm: crc32c hash() 12081 MB/s
ksm: xxh64 hash() 8770 MB/s
ksm: xxh32 hash() 4529 MB/s
ksm: jhash2 hash() 1569 MB/s
Sioh Lee's testing (copy from other mail):
Test platform: openstack cloud platform (NEWTON version)
Experiment node: openstack based cloud compute node (CPU: xeon E5-2620 v3, memory 64gb)
VM: (2 VCPU, RAM 4GB, DISK 20GB) * 4
Linux kernel: 4.14 (latest version)
KSM setup - sleep_millisecs: 200ms, pages_to_scan: 200
Experiment process:
Firstly, we turn off KSM and launch 4 VMs. Then we turn on the KSM and
measure the checksum computation time until full_scans become two.
The experimental results (the experimental value is the average of the measured values)
crc32c_intel: 1084.10ns
crc32c (no hardware acceleration): 7012.51ns
xxhash32: 2227.75ns
xxhash64: 1413.16ns
jhash2: 5128.30ns
In summary, the result shows that crc32c_intel has advantages over all of
the hash function used in the experiment. (decreased by 84.54% compared
to crc32c, 78.86% compared to jhash2, 51.33% xxhash32, 23.28% compared to
xxhash64) the results are similar to those of Timofey.
But, use only xxhash for now, because for using crc32c, cryptoapi must be
initialized first - that require some tricky solution to work good in all
situations.
So:
- First patch implement compile time pickup of fastest implementation of
xxhash for target platform.
- The second patch replaces jhash2 with xxhash
This patch (of 2):
xxh32() - fast on both 32/64-bit platforms
xxh64() - fast only on 64-bit platform
Create xxhash() which will pick up the fastest version at compile time.
Link: http://lkml.kernel.org/r/20181023182554.23464-2-nefelim4ag@gmail.com
Signed-off-by: Timofey Titovets <nefelim4ag@gmail.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: leesioh <solee@os.korea.ac.kr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Heiko has complained that his log is swamped by warnings from
has_unmovable_pages
[ 20.536664] page dumped because: has_unmovable_pages
[ 20.536792] page:000003d081ff4080 count:1 mapcount:0 mapping:000000008ff88600 index:0x0 compound_mapcount: 0
[ 20.536794] flags: 0x3fffe0000010200(slab|head)
[ 20.536795] raw: 03fffe0000010200 0000000000000100 0000000000000200 000000008ff88600
[ 20.536796] raw: 0000000000000000 0020004100000000 ffffffff00000001 0000000000000000
[ 20.536797] page dumped because: has_unmovable_pages
[ 20.536814] page:000003d0823b0000 count:1 mapcount:0 mapping:0000000000000000 index:0x0
[ 20.536815] flags: 0x7fffe0000000000()
[ 20.536817] raw: 07fffe0000000000 0000000000000100 0000000000000200 0000000000000000
[ 20.536818] raw: 0000000000000000 0000000000000000 ffffffff00000001 0000000000000000
which are not triggered by the memory hotplug but rather CMA allocator.
The original idea behind dumping the page state for all call paths was
that these messages will be helpful debugging failures. From the above it
seems that this is not the case for the CMA path because we are lacking
much more context. E.g the second reported page might be a CMA allocated
page. It is still interesting to see a slab page in the CMA area but it
is hard to tell whether this is bug from the above output alone.
Address this issue by dumping the page state only on request. Both
start_isolate_page_range and has_unmovable_pages already have an argument
to ignore hwpoison pages so make this argument more generic and turn it
into flags and allow callers to combine non-default modes into a mask.
While we are at it, has_unmovable_pages call from
is_pageblock_removable_nolock (sysfs removable file) is questionable to
report the failure so drop it from there as well.
Link: http://lkml.kernel.org/r/20181218092802.31429-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is only very limited information printed when the memory offlining
fails:
[ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed due to signal backoff
This tells us that the failure is triggered by the userspace intervention
but it doesn't tell us much more about the underlying reason. It might be
that the page migration failes repeatedly and the userspace timeout
expires and send a signal or it might be some of the earlier steps
(isolation, memory notifier) takes too long.
If the migration failes then it would be really helpful to see which page
that and its state. The same applies to the isolation phase. If we fail
to isolate a page from the allocator then knowing the state of the page
would be helpful as well.
Dump the page state that fails to get isolated or migrated. This will
tell us more about the failure and what to focus on during debugging.
[akpm@linux-foundation.org: add missing printk arg]
[mhocko@suse.com: tweak dump_page() `reason' text]
Link: http://lkml.kernel.org/r/20181116083020.20260-6-mhocko@kernel.org
Link: http://lkml.kernel.org/r/20181107101830.17405-6-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Oscar Salvador <OSalvador@suse.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The memory offlining failure reporting is inconsistent and insufficient.
Some error paths simply do not report the failure to the log at all. When
we do report there are no details about the reason of the failure and
there are several of them which makes memory offlining failures hard to
debug.
Make sure that the
memory offlining [mem %#010llx-%#010llx] failed
message is printed for all failures and also provide a short textual
reason for the failure e.g.
[ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed due to signal backoff
this tells us that the offlining has failed because of a signal pending
aka user intervention.
[akpm@linux-foundation.org: tweak messages a bit]
Link: http://lkml.kernel.org/r/20181107101830.17405-5-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Oscar Salvador <OSalvador@suse.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This function is never called from a context which would provide
misaligned pfn range so drop the pointless check.
Link: http://lkml.kernel.org/r/20181107101830.17405-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Oscar Salvador <OSalvador@suse.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__dump_page messages use KERN_EMERG resp. KERN_ALERT loglevel (this is
the case since 2004). Most callers of this function are really detecting
a critical page state and BUG right after. On the other hand the function
is called also from contexts which just want to inform about the page
state and those would rather not disrupt logs that much (e.g. some
systems route these messages to the normal console).
Reduce the loglevel to KERN_WARNING to make dump_page easier to reuse for
other contexts while those messages will still make it to the kernel log
in most setups. Even if the loglevel setup filters warnings away those
paths that are really critical already print the more targeted error or
panic and that should make it to the kernel log.
[mhocko@kernel.org: fix __dump_page()]
Link: http://lkml.kernel.org/r/20181212142540.GA7378@dhcp22.suse.cz
[akpm@linux-foundation.org: s/KERN_WARN/KERN_WARNING/, per Michal]
Link: http://lkml.kernel.org/r/20181107101830.17405-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Oscar Salvador <OSalvador@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I have been promissing to improve memory offlining failures debugging for
quite some time. As things stand now we get only very limited information
in the kernel log when the offlining fails. It is usually only
[ 1984.506184] rac1 kernel: memory offlining [mem 0x82600000000-0x8267fffffff] failed
with no further details. We do not know what exactly fails and for what
reason. Whenever I was forced to debug such a failure I've always had to
do a debugging patch to tell me more. We can enable some tracepoints but
it would be much better to get a better picture without using them.
This patch series does 2 things. The first one is to make dump_page more
usable by printing more information about the mapping patch 1. Then it
reduces the log level from emerg to warning so that this function is
usable from less critical context patch 2. Then I have added more
detailed information about the offlining failure patch 4 and finally add
dump_page to isolation and offlining migration paths. Patch 3 is a
trivial cleanup.
This patch (of 6):
__dump_page prints the mapping pointer but that is quite unhelpful for
many reports because the pointer itself only helps to distinguish anon/ksm
mappings from other ones (because of lowest bits set). Sometimes it would
be much more helpful to know what kind of mapping that is actually and if
we know this is a file mapping then also try to resolve the dentry name.
[dan.carpenter@oracle.com: fix a width vs precision bug in printk]
Link: http://lkml.kernel.org/r/20181123072135.gqvblm2vdujbvfjs@kili.mountain
[mhocko@kernel.org: use %dp to print dentry]
Link: http://lkml.kernel.org/r/20181125080834.GB12455@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20181107101830.17405-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Cc: Oscar Salvador <OSalvador@suse.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's a trivial simplification for get_next_ra_size() and clear enough for
humans to understand.
It also fixes potential overflow if ra->size(< ra_pages) is too large.
Link: http://lkml.kernel.org/r/1540707206-19649-1-git-send-email-hsiangkao@aol.com
Signed-off-by: Gao Xiang <hsiangkao@aol.com>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This happened while running in qemu-system-aarch64, the AMBA PL011 UART
driver when enabling CONFIG_DEBUG_TEST_DRIVER_REMOVE.
arch_initcall(pl011_init) came before subsys_initcall(default_bdi_init),
devtmpfs' handle_remove() crashes because the reference count is a NULL
pointer only because wb->bdi hasn't been initialized yet.
Rework so that wb_put have an extra check if wb->bdi before decrement
wb->refcnt and also add a WARN_ON_ONCE to get a warning if it happens
again in other drivers.
Link: http://lkml.kernel.org/r/20181030113545.30999-2-anders.roxell@linaro.org
Fixes: 52ebea749a ("writeback: make backing_dev_info host cgroup-specific bdi_writebacks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Contrary to its name, mmu_notifier_synchronize() does not synchronize the
notifier's SRCU instance, but rather waits for RCU callbacks to finish.
i.e. it invokes rcu_barrier(). The RCU documentation is quite clear on
this matter, explicitly calling out that rcu_barrier() does not imply
synchronize_rcu().
As there are no callers of mmu_notifier_synchronize() and it's unclear
whether any user of mmu_notifier_call_srcu() will ever want to barrier on
their callbacks, simply remove the function.
Link: http://lkml.kernel.org/r/20181106134705.14197-1-sean.j.christopherson@intel.com
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In hot remove, we try to clear poisoned pages, but a small optimization to
check if num_poisoned_pages is 0 helps remove the iteration through
nr_pages.
[akpm@linux-foundation.org: tweak comment text]
Link: http://lkml.kernel.org/r/20181102120001.4526-1-bsingharora@gmail.com
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The (root-only) page owner read might allocate a large size of memory with
a large read count. Allocation fails can easily occur when doing high
order allocations.
Clamp buffer size to PAGE_SIZE to avoid arbitrary size allocation
and avoid allocation fails due to high order allocation.
[akpm@linux-foundation.org: use min_t()]
Link: http://lkml.kernel.org/r/1541091607-27402-1-git-send-email-miles.chen@mediatek.com
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Multiple people have reported the following sparse warning:
./include/linux/slab.h:332:43: warning: dubious: x & !y
The minimal fix would be to change the logical & to boolean &&, which
emits the same code, but Andrew has suggested that the branch-avoiding
tricks are maybe not worthwile. David Laight provided a nice comparison
of disassembly of multiple variants, which shows that the current version
produces a 4 deep dependency chain, and fixing the sparse warning by
changing logical and to multiplication emits an IMUL, making it even more
expensive.
The code as rewritten by this patch yielded the best disassembly, with a
single predictable branch for the most common case, and a ternary operator
for the rest, which gcc seems to compile without a branch or cmov by
itself.
The result should be more readable, without a sparse warning and probably
also faster for the common case.
Link: http://lkml.kernel.org/r/80340595-d7c5-97b9-4f6c-23fa893a91e9@suse.cz
Fixes: 1291523f2c ("mm, slab/slub: introduce kmalloc-reclaimable caches")
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: Darryl T. Agostinelli <dagostinelli@gmail.com>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If __cmpxchg_double_slab() fails and (l != m), current code records
transition states of slub action.
Update the action after __cmpxchg_double_slab() success to record the
final state.
[akpm@linux-foundation.org: more whitespace cleanup]
Link: http://lkml.kernel.org/r/20181107013119.3816-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
node_match() is a static function and is only invoked in slub.c.
In all three places, `page' is ensured to be valid.
Link: http://lkml.kernel.org/r/20181106150245.1668-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
cpu_slab is a per cpu variable which is allocated in all or none. If a
cpu_slab failed to be allocated, the slub is not usable.
We could use cpu_slab without validation in __flush_cpu_slab().
Link: http://lkml.kernel.org/r/20181103141218.22844-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
WARN_ON() already contains an unlikely(), so it's not necessary to use
unlikely.
Also change WARN_ON() back to WARN_ON_ONCE() to avoid potentially
spamming dmesg with user-triggerable large allocations.
[akpm@linux-foundation.org: s/WARN_ON/WARN_ON_ONCE/, per Vlastimil]
Link: http://lkml.kernel.org/r/20181104125028.3572-1-tiny.windzz@gmail.com
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For sync io read in ocfs2_read_blocks_sync(), first clear bh uptodate flag
and submit the io, second wait io done, last check whether bh uptodate, if
not return io error.
If two sync io for the same bh were issued, it could be the first io done
and set uptodate flag, but just before check that flag, the second io came
in and cleared uptodate, then ocfs2_read_blocks_sync() for the first io
will return IO error.
Indeed it's not necessary to clear uptodate flag, as the io end handler
end_buffer_read_sync() will set or clear it based on io succeed or failed.
The following message was found from a nfs server but the underlying
storage returned no error.
[4106438.567376] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2780 ERROR: read block 1238823695 failed -5
[4106438.567569] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2812 ERROR: status = -5
[4106438.567611] (nfsd,7146,3):ocfs2_test_inode_bit:2894 ERROR: get alloc slot and bit failed -5
[4106438.567643] (nfsd,7146,3):ocfs2_test_inode_bit:2932 ERROR: status = -5
[4106438.567675] (nfsd,7146,3):ocfs2_get_dentry:94 ERROR: test inode bit failed -5
Same issue in non sync read ocfs2_read_blocks(), fixed it as well.
Link: http://lkml.kernel.org/r/20181121020023.3034-4-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Changwei Ge <ge.changwei@h3c.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dirty flag of the journal should be cleared at the last stage of umount,
if do it before jbd2_journal_destroy(), then some metadata in uncommitted
transaction could be lost due to io error, but as dirty flag of journal
was already cleared, we can't find that until run a full fsck. This may
cause system panic or other corruption.
Link: http://lkml.kernel.org/r/20181121020023.3034-3-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@versity.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Included file path was hard-wired in the ocfs2 makefile, which might
causes some confusion when compiling ocfs2 as an external module.
Say if we compile ocfs2 module as following.
cp -r /kernel/tree/fs/ocfs2 /other/dir/ocfs2
cd /other/dir/ocfs2
make -C /path/to/kernel_source M=`pwd` modules
Acutally, the compiler wil try to find included file in
/kernel/tree/fs/ocfs2, rather than the directory /other/dir/ocfs2.
To fix this little bug, we introduce the var $(src) provided by kbuild.
$(src) means the absolute path of the running kbuild file.
Link: http://lkml.kernel.org/r/20181108085546.15149-1-lchen@suse.com
Signed-off-by: Larry Chen <lchen@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lastzero is not used after setting its value. It is safe to remove the
unused variable.
Link: http://lkml.kernel.org/r/1540296942-24533-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
status is not used after setting its value. It is safe to remove the
unused variable.
Link: http://lkml.kernel.org/r/1540300179-26697-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Acked-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reading heartbeat data from lowest node rather than from zero, in cases
where the node is not defined from zero, can reduce the number of sectors
read.
Here is a simple test data obtained with 'iostat -dmx dm-5 2', with
two nodes in the cluster, node number 10, 20, respectively.
Before optimization:
Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await r_await w_await svctm %util
dm-5 0.00 0.00 0.50 0.50 0.01 0.00 11.00 0.00 1.00 1.00 1.00 1.50 0.15
After the optimization:
Device: rrqm/s wrqm/s r/s w/s rMB/s wMB/s avgrq-sz avgqu-sz await r_await w_await svctm %util
dm-5 0.00 0.00 0.50 0.50 0.00 0.00 6.00 0.00 0.50 1.00 0.00 0.50 0.05
Link: http://lkml.kernel.org/r/99fe4988-69ac-3615-a218-3042fe6fbe72@huawei.com
Signed-off-by: Jia Guo <guojia12@huawei.com>
Reviewed-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Acked-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current value of the early boot static pool size, 1024 is not big
enough for systems with large number of CPUs with timer or/and workqueue
objects selected. As the results, systems have 60+ CPUs with both timer
and workqueue objects enabled could trigger "ODEBUG: Out of memory.
ODEBUG disabled".
Some debug objects are allocated during the early boot. Enabling some
options like timers or workqueue objects may increase the size required
significantly with large number of CPUs. For example,
CONFIG_DEBUG_OBJECTS_TIMERS:
No. CPUs x 2 (worker pool) objects:
start_kernel
workqueue_init_early
init_worker_pool
init_timer_key
debug_object_init
plus No. CPUs objects (CONFIG_HIGH_RES_TIMERS):
sched_init
hrtick_rq_init
hrtimer_init
CONFIG_DEBUG_OBJECTS_WORK:
No. CPUs objects:
vmalloc_init
__init_work
plus No. CPUs x 6 (workqueue) objects:
workqueue_init_early
alloc_workqueue
__alloc_workqueue_key
alloc_and_link_pwqs
init_pwq
Also, plus No. CPUs objects:
perf_event_init
__init_srcu_struct
init_srcu_struct_fields
init_srcu_struct_nodes
__init_work
However, none of the things are actually used or required before
debug_objects_mem_init() is invoked, so just move the call right before
vmalloc_init().
According to tglx, "the reason why the call is at this place in
start_kernel() is historical. It's because back in the days when
debugobjects were added the memory allocator was enabled way later than
today."
Link: http://lkml.kernel.org/r/20181126102407.1836-1-cai@gmx.us
Signed-off-by: Qian Cai <cai@gmx.us>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update license to use SPDX-License-Identifier instead of verbose license
text, excepting ${LINUX}/arch/sh/kernel/cpu/sh4/softfloat.c which is not
GPL license
Link: http://lkml.kernel.org/r/87a7lkcsya.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update license to use SPDX-License-Identifier instead of verbose license
text.
As original license mentioned, it is GPL-2.0 in SPDX.
Then, MODULE_LICENSE() should be "GPL v2" instead of "GPL".
See ${LINUX}/include/linux/module.h
"GPL" [GNU Public License v2 or later]
"GPL v2" [GNU Public License v2]
Link: http://lkml.kernel.org/r/87h8fsct0a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no need to have the 'struct clk *camera_clk' variable static
since a new value is always assigned before use.
Link: http://lkml.kernel.org/r/1543628631-99957-1-git-send-email-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: "Miquel Raynal" <miquel.raynal@bootlin.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/sh/boards/mach-kfr2r09/setup.c does not need to #include
<mtd/onenand.h>, and doing so causes a build warning, so drop that header
file.
In file included from ../arch/sh/boards/mach-kfr2r09/setup.c:28:
../include/linux/mtd/onenand.h:225:12: warning: 'struct mtd_oob_ops' declared inside parameter list will not be visible outside of this definition or declaration
struct mtd_oob_ops *ops);
Link: http://lkml.kernel.org/r/702f0a25-c63e-6912-4640-6ab0f00afbc7@infradead.org
Fixes: f3590dc329 ("media: arch: sh: kfr2r09: Use new renesas-ceu camera driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a script that will run spdxcheck.py through a couple of self tests to
simplify validation in the future. The tests are run for both Python 2
and Python 3 to make sure all changes to the script remain compatible
across both versions.
The script tests a regular text file (Makefile) for basic sanity checks
and then runs it on a binary file (Documentation/logo.gif) to make sure it
works in both cases. It also tests opening files passed on the command
line as well as piped files read from standard input. Finally a run on
the complete tree will be performed to catch any other potential issues.
Link: http://lkml.kernel.org/r/20181212131210.28024-2-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Thomas Gleixner <tglx@linutronix.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joe Perches <joe@perches.com>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is to track dynamic amount of stack growth for aarch64, so it is
possible to print out offensive functions that may consume too much stack.
For example,
0xffff2000084d1270 try_to_unmap_one [vmlinux]: Dynamic (0xcf0)
0xffff200008538358 migrate_page_move_mapping [vmlinux]: Dynamic (0xc60)
0xffff2000081276c8 copy_process.isra.2 [vmlinux]: Dynamic (0xb20)
0xffff200008424958 show_free_areas [vmlinux]: Dynamic (0xb40)
0xffff200008545178 __split_huge_pmd_locked [vmlinux]: Dynamic (0xb30)
0xffff200008555120 collapse_shmem [vmlinux]: Dynamic (0xbc0)
0xffff20000862e0d0 do_direct_IO [vmlinux]: Dynamic (0xb70)
0xffff200008cc0aa0 md_do_sync [vmlinux]: Dynamic (0xb90)
Link: http://lkml.kernel.org/r/20181208025143.39363-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Running something like:
decodecode vmlinux .
leads to interested results where not only the leading "." gets stripped
from the displayed paths, but also anywhere in the string, displaying
something like:
kvm_vcpu_check_block (arch/arm64/kvm/virt/kvm/kvm_mainc:2141)
which doesn't help further processing.
Fix it by only stripping the base path if it is a prefix of the path.
Link: http://lkml.kernel.org/r/20181210174659.31054-3-marc.zyngier@arm.com
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
