Commit Graph

281 Commits

Author SHA1 Message Date
Olof Johansson
bcec1221c9 Fixes for omaps for v5.4-rc cycle
Here are fixes for omaps to deal with few regressions, and to fix
 more boot time errors and warnings:
 
 - The recent ti-sysc interconnect target module driver changes had
   incorrect clock bits for both clocks and dts that cause warnings
 
 - For omap3-gta04, gpio changes caused the LCD to break a while back,
   and after discussing things the right fix is to set spi-cs-high
 
 - Recent omapdrm changes to use generic panels caused tfp410 to be
   disabled as we now must enable the generic support for it in
   defconfig
 
 - Recent omapdrm and backlight changes also finally made droid4 LCD
   to work, so let's enable it in the defconfig it can be used out
   of the box. This is not strictly a fix, but we still also have the
   older CONFIG_MFD_TI_LMU options available so this cuts down the
   confusion for trying to guess which display and which backlight
   is needed
 
 - Recent ti-sysc interconnect target module changes need the gpio
   module disabled on some boards, but this now needs to happen at
   the module level, not at the gpio driver level
 
 - Recent changes to probe system timers with ti-sysc caused warnings
   about mismatch in syconfig registers, so let's configure the option
   for RESET_STATUS as available in the TRMs
 
 - Recent changes to probe LCDC with ti-sysc caused warnings about
   mismatch in sysconfig registers, so let's configure the missing
   idlemodes for both platform data and dts as documented in TRMs
 
 - Since we moved mach-omap2 to probe with device tree, we've been
   getting voltage controller warnings. Turns out this code is no
   longer needed, so let's just remove omap2_set_init_voltage() to
   get rid of the pointless warnings
 
 - Configure am4372 dispc memory bandwidth to avoid underflow errors
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl2U6fcRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXMu5RAAi9bqFTwKU3YiA4o0yDufGtx63fMziCD4
 pMct5DMqyIfkCbU6KIp/pC3g3x35zl7WjoAbyB9Q8o33g/9mnQUSSTkB1TID/fZ0
 +d7epXsGPRWymP2B13xOH/yRJv8dDeVWVHLBJdatuaAJ0mygpf4a4ChkXYKp+nhl
 oShxeRiOYYCrhowklmjvzV0atz17QSNc42GvAUpL3aicU9XmeYn7JLcxZ+3dBXuz
 5IRbM/kt66i0owT6Oymf2lvf+UXELLXL/bXINPbPyYrXw94WuIk1z3i3gtQLsRk+
 CyoYczBsgSWZRoFJB03324HY+KhGNHbC6kjfqoWk5UrbbX13L1+tSnKSlFRcZddx
 64HPZISsgPOlx+i4TlTw/7YMq6FbLB8Z9gp+J1hxycynjYrfVQNCJADMlQDqA1DS
 gncdaz0O1RVcQULndFu7EYyLvybUjFmr0Q1wrW7mOFbIQn7KVTNYJ9GUJjWwmYcI
 N9yw6H7FjNad0TA+5prXKvQj+iP6budedW9Ke3mvyhkePMKwvORX5I6aVKjL0vKo
 gjUKuZC2x75GxgiUwYIJwDOEQGkBySFtf7RGFBjJ7l73/r4kDH6X/kG5AQDB0l3e
 sTSgMTM8KbkNWdQsvATSEN0Tf4Z7UsuhAhKLihNmkt7YXaYXEtBu0xoKPR8y6Xbd
 ZkiGMxkpLUY=
 =SkMF
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.4/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omaps for v5.4-rc cycle

Here are fixes for omaps to deal with few regressions, and to fix
more boot time errors and warnings:

- The recent ti-sysc interconnect target module driver changes had
  incorrect clock bits for both clocks and dts that cause warnings

- For omap3-gta04, gpio changes caused the LCD to break a while back,
  and after discussing things the right fix is to set spi-cs-high

- Recent omapdrm changes to use generic panels caused tfp410 to be
  disabled as we now must enable the generic support for it in
  defconfig

- Recent omapdrm and backlight changes also finally made droid4 LCD
  to work, so let's enable it in the defconfig it can be used out
  of the box. This is not strictly a fix, but we still also have the
  older CONFIG_MFD_TI_LMU options available so this cuts down the
  confusion for trying to guess which display and which backlight
  is needed

- Recent ti-sysc interconnect target module changes need the gpio
  module disabled on some boards, but this now needs to happen at
  the module level, not at the gpio driver level

- Recent changes to probe system timers with ti-sysc caused warnings
  about mismatch in syconfig registers, so let's configure the option
  for RESET_STATUS as available in the TRMs

- Recent changes to probe LCDC with ti-sysc caused warnings about
  mismatch in sysconfig registers, so let's configure the missing
  idlemodes for both platform data and dts as documented in TRMs

- Since we moved mach-omap2 to probe with device tree, we've been
  getting voltage controller warnings. Turns out this code is no
  longer needed, so let's just remove omap2_set_init_voltage() to
  get rid of the pointless warnings

- Configure am4372 dispc memory bandwidth to avoid underflow errors

* tag 'omap-for-v5.4/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am4372: Set memory bandwidth limit for DISPC
  ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  ARM: OMAP2+: Add missing LCDC midlemode for am335x
  ARM: OMAP2+: Fix missing reset done flag for am3 and am43
  ARM: dts: Fix gpio0 flags for am335x-icev2
  ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
  ARM: omap2plus_defconfig: Enable DRM_TI_TFP410
  DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  ARM: dts: Fix wrong clocks for dra7 mcasp
  clk: ti: dra7: Fix mcasp8 clock bits

Link: https://lore.kernel.org/r/pull-1570040410-308159@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-03 09:15:19 -07:00
Tony Lindgren
dd8882a255 clk: ti: dra7: Fix mcasp8 clock bits
There's a typo for dra7 mcasp clkctrl bit, it should be 22 like the other
macasp instances, and not 24. And in dra7xx_clks[] we have the bits wrong
way around.

Fixes: dffa9051d5 ("clk: ti: dra7: add new clkctrl data")
Cc: linux-clk@vger.kernel.org
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Suman Anna <s-anna@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-23 10:32:37 -07:00
Linus Torvalds
f97c81dc6c ARM: SoC: late updates for v5.4
This is some material that we picked up into our tree late or
 that had complex inter-depondencies. The fact that there are these
 interdependencies tends to meant that these are often actually the most
 interesting new additions:
 
 The new Aspeed AST2600 baseboard management controller is added, this
 is a Cortex-A7 based follow-up to the ARM11 based AST2500 and had some
 dependencies on other device drivers.
 
 After many years, support for the MMP2 based OLPC XO-1.75 finally makes
 it into the kernel.
 
 The Armada 3720 based Turris Mox open source router platform is a late
 addition and it follows some preparatory work across multiple branches.
 
 The OMAP2+ platform had some large-scale cleanup involving driver
 changes and DT changes, here we finish it off, dropping a lot of the
 now-unused platform data.
 
 The TI K3 platform that got added for 5.3 gains a lot more support
 for individual bits on the SoC, this part just came late for the
 merge window.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdf6P3AAoJEJpsee/mABjZMFUP/i/J9CNJjEec0cWCG1XgP/qh
 SpKFf2g9Y9QzqAzDDovo7atTGHTCG8C0fn8W+bkv9h7dWj2uxRtFISM9COomUoHa
 0qXUL9bbDB3LAvstLV451p4c67XsJUazV9KZPD7VsCquucWbDDYaGPz+0reSRm6y
 imK2jXqD0leG0CNbgRXfh64J32TF3M0/XnwbsNJreCmQvwUvkYLL5VNi/qcnvfyp
 k0g1/5OzH9mLertoVKWqJ9o1919Yvxdl6/eyDmTPmX08bs03WnPbCEzRVO/zkOKZ
 O6RcAlsjiLblQdfbDJKfbaYDDaE53d2NwdCvBIdSPmDoYM5eYjQC4PmDM0+0dmHe
 bFd9giBjzU2Uab7ylgeoVl6pX1ISk6bwmZxNup45cy0xyw8wuky02Wq2bQTuZbgI
 UcBlOGWR4aH/OCpNafn+ovDBYGc64I7EQobG7UiilrVq/libx1Uo7yjlWSxe4j8n
 wFchiB8It24WUiS4JhJFrTklkaf5JW3K3czdDATW7aZKjv+fnHU5GMre/hvNP4z7
 qROlP69/eqNXG25VOcwWPQE8yhP43+ZgyvoVwDh1H6VZdy9WxgYyEoiBAhFfcrng
 +RVAT4rzylPmKP8oygVF1fpTHTS8xHrYBbjkdRaj5KqmTDdqI/nMsYoq+E0R1ScV
 EsnyNVq7wnvH12zrOv+I
 =Qtkp
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC late updates from Arnd Bergmann:
 "This is some material that we picked up into our tree late or that had
  complex inter-depondencies. The fact that there are these
  interdependencies tends to meant that these are often actually the
  most interesting new additions:

   - The new Aspeed AST2600 baseboard management controller is added,
     this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and
     had some dependencies on other device drivers.

   - After many years, support for the MMP2 based OLPC XO-1.75 finally
     makes it into the kernel.

   - The Armada 3720 based Turris Mox open source router platform is a
     late addition and it follows some preparatory work across multiple
     branches.

   - The OMAP2+ platform had some large-scale cleanup involving driver
     changes and DT changes, here we finish it off, dropping a lot of
     the now-unused platform data.

   - The TI K3 platform that got added for 5.3 gains a lot more support
     for individual bits on the SoC, this part just came late for the
     merge window"

[ This pull request itself wasn't actually sent late at all by Arnd, but
  I waited on the branches that it used to be pulled first, so it ends
  up being merged much later than the other ARM SoC pull requests this
  merge window     - Linus ]

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
  ARM: dts: dir685: Drop spi-cpol from the display
  ARM: dts: aspeed: Add AST2600 pinmux nodes
  ARM: dts: aspeed: Add AST2600 and EVB
  ARM: exynos: Enable support for ARM architected timers
  ARM: samsung: Fix system restart on S3C6410
  ARM: dts: mmp2: add OLPC XO 1.75 machine
  ARM: dts: mmp2: rename the USB PHY node
  ARM: dts: mmp2: specify reg-shift for the UARTs
  ARM: dts: mmp2: add camera interfaces
  ARM: dts: mmp2: fix the SPI nodes
  ARM: dts: mmp2: trivial whitespace fix
  arm64: dts: marvell: add DTS for Turris Mox
  dt-bindings: marvell: document Turris Mox compatible
  arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl
  arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address
  arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address
  arm64: dts: ti: k3-j721e-main: Add hwspinlock node
  arm64: dts: ti: k3-am65-main: Add hwspinlock node
  arm64: dts: k3-j721e: Add gpio-keys on common processor board
  dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E
  ...
2019-09-20 15:53:02 -07:00
Stephen Boyd
91bcbc11d6 Merge branches 'clk-renesas', 'clk-rockchip', 'clk-const' and 'clk-simplify' into clk-next
* clk-renesas:
  clk: renesas: cpg-mssr: Set GENPD_FLAG_ALWAYS_ON for clock domain
  clk: renesas: r9a06g032: Set GENPD_FLAG_ALWAYS_ON for clock domain
  clk: renesas: mstp: Set GENPD_FLAG_ALWAYS_ON for clock domain
  dt-bindings: clk: emev2: Rename bindings documentation file
  clk: renesas: rcar-usb2-clock-sel: Use devm_platform_ioremap_resource() helper

* clk-rockchip:
  clk: rockchip: Add clock controller for the rk3308
  clk: rockchip: Add dt-binding header for rk3308
  dt-bindings: Add bindings for rk3308 clock controller
  clk: rockchip: Fix -Wunused-const-variable in rv1108 clk driver

* clk-const:
  clk: spear: Make structure i2s_sclk_masks constant

* clk-simplify:
  clk/ti: Use kmemdup rather than duplicating its implementation
  clk: fix devm_platform_ioremap_resource.cocci warnings
2019-09-19 15:31:41 -07:00
Stephen Boyd
a1ff1ce300 Merge branches 'clk-init-destroy', 'clk-doc', 'clk-imx' and 'clk-allwinner' into clk-next
- Set clk_init_data pointer inside clk_hw to NULL after registration

* clk-init-destroy:
  clk: Overwrite clk_hw::init with NULL during clk_register()
  clk: sunxi: Don't call clk_hw_get_name() on a hw that isn't registered
  clk: ti: Don't reference clk_init_data after registration
  clk: qcom: Remove error prints from DFS registration
  rtc: sun6i: Don't reference clk_init_data after registration
  clk: zx296718: Don't reference clk_init_data after registration
  clk: milbeaut: Don't reference clk_init_data after registration
  clk: socfpga: deindent code to proper indentation
  phy: ti: am654-serdes: Don't reference clk_init_data after registration
  clk: sprd: Don't reference clk_init_data after registration
  clk: socfpga: Don't reference clk_init_data after registration
  clk: sirf: Don't reference clk_init_data after registration
  clk: qcom: Don't reference clk_init_data after registration
  clk: meson: axg-audio: Don't reference clk_init_data after registration
  clk: lochnagar: Don't reference clk_init_data after registration
  clk: actions: Don't reference clk_init_data after registration

* clk-doc:
  clk: remove extra ---help--- tags in Kconfig
  clk: add include guard to clk-conf.h
  clk: Document of_parse_clkspec() some more
  clk: Remove extraneous 'for' word in comments

* clk-imx: (32 commits)
  clk: imx: imx8mn: fix pll mux bit
  clk: imx: imx8mm: fix pll mux bit
  clk: imx: clk-pll14xx: unbypass PLL by default
  clk: imx: pll14xx: avoid glitch when set rate
  clk: imx: imx8mn: fix audio pll setting
  clk: imx8mn: Add necessary frequency support for ARM PLL table
  clk: imx8mn: Add missing rate_count assignment for each PLL structure
  clk: imx8mn: fix int pll clk gate
  clk: imx8mn: Add GIC clock
  clk: imx8mn: Fix incorrect parents
  clk: imx8mm: Fix incorrect parents
  clk: imx8mq: Fix sys3 pll references
  clk: imx8mq: Unregister clks when of_clk_add_provider failed
  clk: imx8mm: Unregister clks when of_clk_add_provider failed
  clk: imx8mq: Mark AHB clock as critical
  clk: imx8mn: Keep uart clocks on for early console
  clk: imx: Remove unused function statement
  clk: imx7ulp: Make sure earlycon's clock is enabled
  clk: imx8mm: Switch to platform driver
  clk: imx: imx8mm: fix audio pll setting
  ...

* clk-allwinner:
  clk: sunxi-ng: h6: Allow I2S to change parent rate
  clk: sunxi-ng: v3s: add Allwinner V3 support
  clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks
  dt-bindings: clk: sunxi-ccu: add compatible string for V3 CCU
  clk: sunxi-ng: v3s: add the missing PLL_DDR1
2019-09-19 15:31:27 -07:00
Fuqian Huang
81b94f1477 clk/ti: Use kmemdup rather than duplicating its implementation
kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memcpy, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Link: https://lkml.kernel.org/r/20190703162700.32091-1-huangfq.daxian@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-06 14:20:15 -07:00
Tony Lindgren
fd56837494 clk: ti: add clkctrl data omap5 sgx
Looks like we have sgx clock missing currently so let's add it.

Cc: Adam Ford <aford173@gmail.com>
Cc: Filip Matijević <filip.matijevic.pz@gmail.com>
Cc: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Cc: moaz korena <moaz@korena.xyz>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Cc: Philipp Rossak <embed3d@gmail.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-clk@vger.kernel.org
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-26 08:47:07 -07:00
Stephen Boyd
e0e04fc866 clk: ti: Don't reference clk_init_data after registration
A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.

Cc: Tero Kristo <t-kristo@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190815221249.53235-1-sboyd@kernel.org
2019-08-16 10:22:46 -07:00
Nishka Dasgupta
b684702f6e clk: ti: dm814x: Add of_node_put() to prevent memory leak
In function dm814x_adpll_early_init, variable np takes the value
returned by of_find_node_by_name, which gets a node but does not put it.
If np is not put before return, it may cause a memory leak. Hence put np
before return.
Issue found with Coccinelle.

Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lkml.kernel.org/r/20190804163328.6693-1-nishkadg.linux@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-08-07 15:26:39 -07:00
Linus Torvalds
916f562fb2 This round of clk driver and framework updates is heavy on the driver update
side. The two main highlights in the core framework are the addition of an bulk
 clk_get API that handles optional clks and an extra debugfs file that tells the
 developer about the current parent of a clk.
 
 The driver updates are dominated by i.MX in the diffstat, but that is mostly
 because that SoC has started converting to the clk_hw style of clk
 registration. The next big update is in the Amlogic meson clk driver that
 gained some support for audio, cpu, and temperature clks while fixing some PLL
 issues. Finally, the biggest thing that stands out is the conversion of a large
 part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses
 less strings and more pointer comparisons to match clk parents and children up.
 
 In general, it looks like we have a lot of little fixes and tweaks here and
 there to clk data along with the normal addition of a handful of new drivers
 and a couple new core framework features.
 
 Core:
  - Add a 'clk_parent' file in clk debugfs
  - Add a clk_bulk_get_optional() API (with devm too)
 
 New Drivers:
  - Support gated clk controller on MIPS based BCM63XX SoCs
  - Support SiLabs Si5341 and Si5340 chips
  - Support for CPU clks on Raspberry Pi devices
  - Audsys clock driver for MediaTek MT8516 SoCs
 
 Updates:
  - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
  - Small frequency support for SiLabs Si544 chips
  - Slow clk support for AT91 SAM9X60 SoCs
  - Remove dead code in various clk drivers (-Wunused)
  - Support for Marvell 98DX1135 SoCs
  - Get duty cycle of generic pwm clks
  - Improvement in mmc phase calculation and cleanup of some rate defintions
  - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
  - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
  - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
  - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
  - Add clks for new Exynos5422 Dynamic Memory Controller driver
  - Clock definition for Exynos4412 Mali
  - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
  - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
  - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
  - TI clock probing done from DT by default instead of firmware
  - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
  - Add Amlogic meson8 audio clocks
  - Add Amlogic g12a temperature sensors clocks
  - Add Amlogic g12a and g12b cpu clocks
  - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
  - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
  - Add Clock Domain support on Renesas RZ/N1
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl0uBEERHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSWucw/9ELKlfvdxrc8mdIuzt+CpKdNiSG88shXY
 hF+vnuE6Jhv5hmlbA/DbplPTAnHT/FQF65/GPQMAYy2wYO6CjleNxQyepiVv4h8/
 tWoXu5vYZXubtQyMnYTffREzjYFPBNAscLUhXNwJKRno7nT0qKCk62WgOMfaW/KN
 lP5dKmrL7rdJDUvxHEStrwP515Lg5Wkhj3+XzgbgFUKGuGlvHfwUOEZucT++kqhu
 Z1vMjPv2ksHQf3r15BsbX/6jMIONEt2Xd6jA3Lm7ebDXJl2hjX4Gq0Kkl5pmkj2w
 F0V7Tw4XYk6DkSl7HQaOBgQ8KV0Mw2L8Vj6eEDhUwx6wPGlQ5YTKkUCJkjs0mUyb
 UpO3TuPFN2W0hsTNDzwYpjqcfodDn159XJcduv1/ZpIanUvHgx0uVzQ7iwwYwW+l
 VR4SipY5AEn9hpief30X7TAUSKsE4do58imYeoGBrq78zdsJaEcDAMX7AcYdXVQ9
 ahBS8ME/d1JEBNdRsSW7eTAfu8dZdI08uR8/T37GRG59XyZSjsyVmZ6kHCYrBygF
 AyLNMsXMCbW1rOoIpWkuGMD86XZy40laLg8T7WWTaq28t1VQ0BaBTGM4/eEexs3p
 FhZ1M7aH+PsDLrI2IGTBt/4xAMv+dhDS7HnxRlOONbWnLWVqmR+tYzF0aCkqJCmd
 O2zWCGffeYs=
 =mK0C
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This round of clk driver and framework updates is heavy on the driver
  update side. The two main highlights in the core framework are the
  addition of an bulk clk_get API that handles optional clks and an
  extra debugfs file that tells the developer about the current parent
  of a clk.

  The driver updates are dominated by i.MX in the diffstat, but that is
  mostly because that SoC has started converting to the clk_hw style of
  clk registration. The next big update is in the Amlogic meson clk
  driver that gained some support for audio, cpu, and temperature clks
  while fixing some PLL issues. Finally, the biggest thing that stands
  out is the conversion of a large part of the Allwinner sunxi-ng driver
  to the new clk parent scheme that uses less strings and more pointer
  comparisons to match clk parents and children up.

  In general, it looks like we have a lot of little fixes and tweaks
  here and there to clk data along with the normal addition of a handful
  of new drivers and a couple new core framework features.

  Core:
   - Add a 'clk_parent' file in clk debugfs
   - Add a clk_bulk_get_optional() API (with devm too)

  New Drivers:
   - Support gated clk controller on MIPS based BCM63XX SoCs
   - Support SiLabs Si5341 and Si5340 chips
   - Support for CPU clks on Raspberry Pi devices
   - Audsys clock driver for MediaTek MT8516 SoCs

  Updates:
   - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
   - Small frequency support for SiLabs Si544 chips
   - Slow clk support for AT91 SAM9X60 SoCs
   - Remove dead code in various clk drivers (-Wunused)
   - Support for Marvell 98DX1135 SoCs
   - Get duty cycle of generic pwm clks
   - Improvement in mmc phase calculation and cleanup of some rate defintions
   - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
   - Add GPIO, SNVS and GIC clocks for i.MX8 drivers
   - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
   - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
   - Add clks for new Exynos5422 Dynamic Memory Controller driver
   - Clock definition for Exynos4412 Mali
   - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
   - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
   - TI clock probing done from DT by default instead of firmware
   - Fix Amlogic Meson mpll fractional part and spread sprectrum issues
   - Add Amlogic meson8 audio clocks
   - Add Amlogic g12a temperature sensors clocks
   - Add Amlogic g12a and g12b cpu clocks
   - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
   - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
   - Add Clock Domain support on Renesas RZ/N1"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
  clk: consoldiate the __clk_get_hw() declarations
  clk: sprd: Add check for return value of sprd_clk_regmap_init()
  clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
  clk: Add Si5341/Si5340 driver
  dt-bindings: clock: Add silabs,si5341
  clk: clk-si544: Implement small frequency change support
  clk: add BCM63XX gated clock controller driver
  devicetree: document the BCM63XX gated clock bindings
  clk: at91: sckc: use dedicated functions to unregister clock
  clk: at91: sckc: improve error path for sama5d4 sck registration
  clk: at91: sckc: remove unnecessary line
  clk: at91: sckc: improve error path for sam9x5 sck register
  clk: at91: sckc: add support to free slow clock osclillator
  clk: at91: sckc: add support to free slow rc oscillator
  clk: at91: sckc: add support to free slow oscillator
  clk: rockchip: export HDMIPHY clock on rk3228
  clk: rockchip: add watchdog pclk on rk3328
  clk: rockchip: add clock id for hdmi_phy special clock on rk3228
  clk: rockchip: add clock id for watchdog pclk on rk3328
  clk: at91: sckc: add support for SAM9X60
  ...
2019-07-17 10:07:48 -07:00
Linus Torvalds
556e2f6020 A handful of clk driver fixes and one core framework fix
- Do a DT/firmware lookup in clk_core_get() even when the DT index is a
    nonsensical value
 
  - Fix some clk data typos in the Amlogic DT headers/code
 
  - Avoid returning junk in the TI clk driver when an invalid clk is
    looked for
 
  - Fix dividers for the emac clks on Stratix10 SoCs
 
  - Fix default HDA rates on Tegra210 to correct distorted audio
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl0VIHcRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSU0Ww//XVDS0JqiWcEopLc8dLrjxn2n7W3qlbB9
 8RqkrvFK/yv9Hrd1OqTSJLnrDQKb0zYnzjzU0g7Isdk81uecRQDJksjWQ/laR5i4
 ut5QOwV8IBSRl6Mu4XoMHvt9apysXX9od8B6Iu1fhbgmQeKlVkX/PYuT+mcQtMjc
 2Zg6ILQpkFaXhB9vQxVZwwmGZyR4/pfNCltl8A1Zg9ZkWgpOvv+7wHo/5AYNIBYM
 JbynlCdOii9gNXwoXPnayNvqwKNi0NEEfzOX/RuSarwrRVKdbqbWKhKlHTRv3LwC
 myo+dh/7l1l+1ANhBedzbnSa5YHSUyZXjkO+pKBctJEOGMV9+fbGEOvxt1LPBr7X
 IrSevXYwPfgHdxxnoMM+S5OTWYyv9jOTTXEwIc3rAoDnAJWcLsg6V8MEGL/CGQ7T
 yrSRARGCowU73rJXwfTayMKSqQgaTGmB00x4lewQK29DA0uMunQTzRU7qjOAe919
 ECgdYV6WJcRCThrAfknARD/FS+J07fMqyLD9IFd2bFQuGWCq8EFT7Ky2t89bXULG
 SMvLUe9CUpURtfdrDjz8h+VzmAStoAWck63EffgymPILRhRI4xY+Mr/YyfQ07rMu
 BTSsj9wd8AywhmOgi42TVOFZS39bDCAytJ9LMaxDyNXsDVi/REC3O43z9kyHoUQB
 JIyQyHFSRD0=
 =3QYB
 -----END PGP SIGNATURE-----

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "A handful of clk driver fixes and one core framework fix

   - Do a DT/firmware lookup in clk_core_get() even when the DT index is
     a nonsensical value

   - Fix some clk data typos in the Amlogic DT headers/code

   - Avoid returning junk in the TI clk driver when an invalid clk is
     looked for

   - Fix dividers for the emac clks on Stratix10 SoCs

   - Fix default HDA rates on Tegra210 to correct distorted audio"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: socfpga: stratix10: fix divider entry for the emac clocks
  clk: Do a DT parent lookup even when index < 0
  clk: tegra210: Fix default rates for HDA clocks
  clk: ti: clkctrl: Fix returning uninitialized data
  clk: meson: meson8b: fix a typo in the VPU parent names array variable
  clk: meson: fix MPLL 50M binding id typo
2019-06-28 08:50:09 +08:00
Thomas Gleixner
d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
YueHaibing
da6a5dda5e clk: ti: Remove unused functions
They are not used any more since
commit 7558562a70 ("clk: ti: Drop legacy clk-3xxx-legacy code")

Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-07 11:54:48 -07:00
Tony Lindgren
41b3588dba clk: ti: clkctrl: Fix returning uninitialized data
If we do a clk_get() for a clock that does not exists, we have
_ti_omap4_clkctrl_xlate() return uninitialized data if no match
is found. This can be seen in some cases with SLAB_DEBUG enabled:

Unable to handle kernel paging request at virtual address 5a5a5a5a
...
clk_hw_create_clk.part.33
sysc_notifier_call
notifier_call_chain
blocking_notifier_call_chain
device_add

Let's fix this by setting a found flag only when we find a match.

Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fixes: 88a172526c ("clk: ti: add support for clkctrl clocks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-06-06 11:19:46 -07:00
Thomas Gleixner
a10e763b87 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 372
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation version 2

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 135 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531081036.435762997@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05 17:37:10 +02:00
Linus Torvalds
20f9449656 A few clk driver fixes
- Don't expose the SiFive clk driver on non-RISCV architectures
 
  - Fix some bits describing clks in the imx8mm driver
 
  - Always call clk domain code in the TI driver so non-legacy platforms
    work
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlzvBroRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSXt1hAAjab8EFP2qRzqoZKEns5Zu4H9htPbLvco
 oWJAcaLgmeF8MV/pK+HmGkqFJnAOBkTf+2NoAkz5qcRghGBacbxfmJAm0zLNoMQ4
 JBGowtpQhio5u52UMNIyVND7TeNdRaNihe1osPpSoFj0zFzwUFIv2aK8Im6gRmWY
 uDNkJdib5DsVURiPa2kqglLLWOpJl5X4tXYpu0i88pToWhiOK9b3ngh1R/VTVYic
 H4vvo6XGClF1CSqpKpwCeUCxyuAWHT+qCbE3SHbEJJcon0QzEFTW635NMLbmCNMa
 oNpqLnPtx+IELvLeTeLyeKKsb9HedgllmqiGp2szC5jj8y+T4T1O45WhCl0mj2TV
 bS0ANcrpxy+edhH0qGEOAp4pK41WO5vEWiQbJBLm6ge9jtLuir/GP91tAcAdBDRT
 DOCGGhmYythMo0OETQ5ZlpP/TvgM9uCPRmg0OTVzZHgosG7u2TZgH5/TzoIlnNRE
 bowpTfKYPTTZ8ZhNqhqmNll8CV/xdmbdTW8QAgnOuj9Kv76IyMGZfxQIbUDbdUox
 cgVFWa+S6HxBUddX5GPsDqm0voE4bhYxBqb6B0NuopjMHYRqphyY5Icp4qQMhbyC
 MzcEEbfGj0GDtDLXEpDFOASWHPpBV/6g6xA1hJyhXPWBl3oEWPM1nL4hIADMx41O
 Wzg6MPVeqWU=
 =gbSJ
 -----END PGP SIGNATURE-----

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk driver fixes from Stephen Boyd:

 - Don't expose the SiFive clk driver on non-RISCV architectures

 - Fix some bits describing clks in the imx8mm driver

 - Always call clk domain code in the TI driver so non-legacy platforms
   work

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: ti: clkctrl: Fix clkdm_clk handling
  clk: imx: imx8mm: fix int pll clk gate
  clk: sifive: restrict Kconfig scope for the FU540 PRCI driver
2019-05-30 16:33:37 -07:00
Tony Lindgren
1cc54078d1 clk: ti: clkctrl: Fix clkdm_clk handling
We need to always call clkdm_clk_enable() and clkdm_clk_disable() even
the clkctrl clock(s) enabled for the domain do not have any gate register
bits. Otherwise clockdomains may never get enabled except when devices get
probed with the legacy "ti,hwmods" devicetree property.

Fixes: 88a172526c ("clk: ti: add support for clkctrl clocks")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-21 11:43:40 -07:00
Thomas Gleixner
ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Stephen Boyd
62e59c4e69 clk: Remove io.h from clk-provider.h
Now that we've gotten rid of clk_readl() we can remove io.h from the
clk-provider header and push out the io.h include to any code that isn't
already including the io.h header but using things like readl/writel,
etc.

Found with this grep:

  git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \
  	xargs git grep -l \
	-e '\<__iowrite32_copy\>' --or \
	-e '\<__ioread32_copy\>' --or \
	-e '\<__iowrite64_copy\>' --or \
	-e '\<ioremap_page_range\>' --or \
	-e '\<ioremap_huge_init\>' --or \
	-e '\<arch_ioremap_pud_supported\>' --or \
	-e '\<arch_ioremap_pmd_supported\>' --or \
	-e '\<devm_ioport_map\>' --or \
	-e '\<devm_ioport_unmap\>' --or \
	-e '\<IOMEM_ERR_PTR\>' --or \
	-e '\<devm_ioremap\>' --or \
	-e '\<devm_ioremap_nocache\>' --or \
	-e '\<devm_ioremap_wc\>' --or \
	-e '\<devm_iounmap\>' --or \
	-e '\<devm_ioremap_release\>' --or \
	-e '\<devm_memremap\>' --or \
	-e '\<devm_memunmap\>' --or \
	-e '\<__devm_memremap_pages\>' --or \
	-e '\<pci_remap_cfgspace\>' --or \
	-e '\<arch_has_dev_port\>' --or \
	-e '\<arch_phys_wc_add\>' --or \
	-e '\<arch_phys_wc_del\>' --or \
	-e '\<memremap\>' --or \
	-e '\<memunmap\>' --or \
	-e '\<arch_io_reserve_memtype_wc\>' --or \
	-e '\<arch_io_free_memtype_wc\>' --or \
	-e '\<__io_aw\>' --or \
	-e '\<__io_pbw\>' --or \
	-e '\<__io_paw\>' --or \
	-e '\<__io_pbr\>' --or \
	-e '\<__io_par\>' --or \
	-e '\<__raw_readb\>' --or \
	-e '\<__raw_readw\>' --or \
	-e '\<__raw_readl\>' --or \
	-e '\<__raw_readq\>' --or \
	-e '\<__raw_writeb\>' --or \
	-e '\<__raw_writew\>' --or \
	-e '\<__raw_writel\>' --or \
	-e '\<__raw_writeq\>' --or \
	-e '\<readb\>' --or \
	-e '\<readw\>' --or \
	-e '\<readl\>' --or \
	-e '\<readq\>' --or \
	-e '\<writeb\>' --or \
	-e '\<writew\>' --or \
	-e '\<writel\>' --or \
	-e '\<writeq\>' --or \
	-e '\<readb_relaxed\>' --or \
	-e '\<readw_relaxed\>' --or \
	-e '\<readl_relaxed\>' --or \
	-e '\<readq_relaxed\>' --or \
	-e '\<writeb_relaxed\>' --or \
	-e '\<writew_relaxed\>' --or \
	-e '\<writel_relaxed\>' --or \
	-e '\<writeq_relaxed\>' --or \
	-e '\<readsb\>' --or \
	-e '\<readsw\>' --or \
	-e '\<readsl\>' --or \
	-e '\<readsq\>' --or \
	-e '\<writesb\>' --or \
	-e '\<writesw\>' --or \
	-e '\<writesl\>' --or \
	-e '\<writesq\>' --or \
	-e '\<inb\>' --or \
	-e '\<inw\>' --or \
	-e '\<inl\>' --or \
	-e '\<outb\>' --or \
	-e '\<outw\>' --or \
	-e '\<outl\>' --or \
	-e '\<inb_p\>' --or \
	-e '\<inw_p\>' --or \
	-e '\<inl_p\>' --or \
	-e '\<outb_p\>' --or \
	-e '\<outw_p\>' --or \
	-e '\<outl_p\>' --or \
	-e '\<insb\>' --or \
	-e '\<insw\>' --or \
	-e '\<insl\>' --or \
	-e '\<outsb\>' --or \
	-e '\<outsw\>' --or \
	-e '\<outsl\>' --or \
	-e '\<insb_p\>' --or \
	-e '\<insw_p\>' --or \
	-e '\<insl_p\>' --or \
	-e '\<outsb_p\>' --or \
	-e '\<outsw_p\>' --or \
	-e '\<outsl_p\>' --or \
	-e '\<ioread8\>' --or \
	-e '\<ioread16\>' --or \
	-e '\<ioread32\>' --or \
	-e '\<ioread64\>' --or \
	-e '\<iowrite8\>' --or \
	-e '\<iowrite16\>' --or \
	-e '\<iowrite32\>' --or \
	-e '\<iowrite64\>' --or \
	-e '\<ioread16be\>' --or \
	-e '\<ioread32be\>' --or \
	-e '\<ioread64be\>' --or \
	-e '\<iowrite16be\>' --or \
	-e '\<iowrite32be\>' --or \
	-e '\<iowrite64be\>' --or \
	-e '\<ioread8_rep\>' --or \
	-e '\<ioread16_rep\>' --or \
	-e '\<ioread32_rep\>' --or \
	-e '\<ioread64_rep\>' --or \
	-e '\<iowrite8_rep\>' --or \
	-e '\<iowrite16_rep\>' --or \
	-e '\<iowrite32_rep\>' --or \
	-e '\<iowrite64_rep\>' --or \
	-e '\<__io_virt\>' --or \
	-e '\<pci_iounmap\>' --or \
	-e '\<virt_to_phys\>' --or \
	-e '\<phys_to_virt\>' --or \
	-e '\<ioremap_uc\>' --or \
	-e '\<ioremap\>' --or \
	-e '\<__ioremap\>' --or \
	-e '\<iounmap\>' --or \
	-e '\<ioremap\>' --or \
	-e '\<ioremap_nocache\>' --or \
	-e '\<ioremap_uc\>' --or \
	-e '\<ioremap_wc\>' --or \
	-e '\<ioremap_wc\>' --or \
	-e '\<ioremap_wt\>' --or \
	-e '\<ioport_map\>' --or \
	-e '\<ioport_unmap\>' --or \
	-e '\<ioport_map\>' --or \
	-e '\<ioport_unmap\>' --or \
	-e '\<xlate_dev_kmem_ptr\>' --or \
	-e '\<xlate_dev_mem_ptr\>' --or \
	-e '\<unxlate_dev_mem_ptr\>' --or \
	-e '\<virt_to_bus\>' --or \
	-e '\<bus_to_virt\>' --or \
	-e '\<memset_io\>' --or \
	-e '\<memcpy_fromio\>' --or \
	-e '\<memcpy_toio\>'

I also reordered a couple includes when they weren't alphabetical and
removed clk.h from kona, replacing it with clk-provider.h because
that driver doesn't use clk consumer APIs.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: John Crispin <john@phrozen.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-15 13:21:37 -07:00
Tero Kristo
869decd1ff clk: ti: dra7: disable the RNG and TIMER12 clkctrl clocks on HS devices
RNG and TIMER12 are reserved for secure side usage only on HS devices,
so disable their clkctrl clocks on HS SoCs also.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25 10:51:36 -07:00
Tero Kristo
2b1202d708 clk: ti: dra7x: prevent non-existing clkctrl clocks from registering
Certain clkctrl clocks (like the USB_OTG_SS4) do not exist on some
variants of the dra7x SoC. Append a flag for these clocks and skip
the registration in cases where the clocks do not exist.

Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25 10:51:33 -07:00
Tero Kristo
b88b5b7182 clk: ti: export the omap2_clk_is_hw_omap call
There is one instance outside the TI clock driver that needs the info
whether a clock is an OMAP HW clock or not. Thus, move the function
declaration into the public header.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25 10:51:12 -07:00
Linus Torvalds
dc2535be1f We have a fairly balanced mix of clk driver updates and clk framework
updates this time around. It's the usual pile of new drivers for new
 hardware out there and the normal small fixes and updates, but then we
 have some core framework changes too.
 
 In the core framework, we introduce support for a clk_get_optional() API
 to get clks that may not always be populated and a way to devm manage clkdev
 lookups registered by provider drivers. We also do some refactoring to simplify
 the interface between clkdev and the common clk framework so we can reuse the DT
 parsing and clk_get() path in provider drivers in the future. This work will
 continue in the next few cycles while we convert how providers specify clk
 parents.
 
 On the driver side, the biggest part of the dirstat is the Amlogic clk driver
 that got support for the G12A SoC. It dominates with almost half the overall
 diff, while the second largest part of the diff is in the i.MX clk driver
 that gained support for imx8mm SoCs. After that, we have the Actions Semiconductor
 and Qualcomm drivers rounding out the big part of the dirstat because they both
 got new hardware support for SoCs. The rest is just various updates and non-critical
 fixes for existing drivers.
 
 Core:
  - Convert a few clk bindings to JSON schema format
  - Add a {devm_}clk_get_optional() API
  - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
  - Start rewriting clk parent registration and supporting device links
    by moving around code that supports clk_get() and DT parsing of the
    'clocks' property
 
 New Drivers:
  - Add Qualcomm MSM8998 RPM managed clks
  - IPA clk support on Qualcomm RPMh clk controllers
  - Actions Semi S500 SoC clk support
  - Support for fixed rate clks populated from an MMIO register
  - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H
  - Add TMU (timer) clocks on Renesas RZ/G2E
  - Add Amlogic G12A Always-On Clock Controller
  - Add 32k clock generation for Amlogic AXG
  - Add support for the Mali GPU clocks on Amlogic Meson8
  - Add Amlogic G12A EE clock controller driver
  - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E
  - Add i.MX8MM SoC clk driver support
 
 Removed Drivers:
  - Remove clps711x driver as the board support is gone
 
 Updates:
  - 3rd ECO fix for Mediatek MT2712 SoCs
  - Updates for Qualcomm MSM8998 GCC clks
  - Random static analysis fixes for clk drivers
  - Support for sleeping gpios in the clk-gpio type
  - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
  - Split LCDC into two clks on the Marvell MMP2 SoC
  - Various DT of_node refcount fixes
  - Get rid of CLK_IS_BASIC from TI code (yay!)
  - TI Autoidle clk support
  - Fix Amlogic Meson8 APB clock ID name
  - Claim input clocks through DT for Amlogic AXG and GXBB
  - Correct the DU (display unit) parent clock on Renesas RZ/G2E
  - Exynos5433 IMEM CMU crypto clk support (SlimSS)
  - Fix for the PLL-MIPI on the Allwinner A23
  - Fix Rockchip rk3328 PLL rate calculation
  - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066
  - i.MX SCU clk driver clk_set_parent() and cpufreq support
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlyIK9URHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSUtIA//SRHcUJBuF7bgLs0GWDL/C0WwQf90bgLn
 83jMUX9MCIS+/RBEUi/Xf9psGVaW3YPEAiRcYUeI1YIZhCrdZHp2YGClKOpXaXth
 vgM7Je+6Say+7ru6J9eHqhbEgx2e+HqT4shxK5I5J0SqMFgdugim4pthk+Lr/WL0
 bMdNHTERZUFrIId10RxuCH7D72nhkwiRkwNDfWjASKoH3spXLKC1vl/wbS5QDE1O
 eXA9OwkonSyrBKX7zMeQiks6f7HWoJO7ei05Twv4CD9UEeS17KmB6mkbmT3GPAuq
 dWbLOnt7I80fMnthKLIR0IWtJuCvPv3jXgP+Fin+e4wutNCnuduHIVc2XeQYmDaX
 rbo/20q4DarL2AaakuowXA7UJ75zYfxPkwgpwcYZ/QW9yzT6QMfynAYekjJGTdt3
 6VootYAwYIsh1VMGZIQLs23AaNYayDy0QWx/prxnEi95lK/+zjqVySPYC/rWe7XQ
 rUrO6YY0YxRdf5uVHneIfIJGs5F/Q8DgdLXp4tf2Ud2YF1bZ0UQOUKehxwM0rxRX
 F9P6iP6mHUuUPMa9rDlwSmgQXDdqH7E5IbXdSPjEFBogBfmhJfVKAo1EyaZgUytZ
 Y42qG/P3fGGfegfWTRAoaDRJn/+HfEmtREdgQ8JO14xlZwRDb/M43IEiQP4zGwlc
 f/OuWu3O9xA=
 =D4Bv
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk subsystem updates from Stephen Boyd:
 "We have a fairly balanced mix of clk driver updates and clk framework
  updates this time around. It's the usual pile of new drivers for new
  hardware out there and the normal small fixes and updates, but then we
  have some core framework changes too.

  In the core framework, we introduce support for a clk_get_optional()
  API to get clks that may not always be populated and a way to devm
  manage clkdev lookups registered by provider drivers. We also do some
  refactoring to simplify the interface between clkdev and the common
  clk framework so we can reuse the DT parsing and clk_get() path in
  provider drivers in the future. This work will continue in the next
  few cycles while we convert how providers specify clk parents.

  On the driver side, the biggest part of the dirstat is the Amlogic clk
  driver that got support for the G12A SoC. It dominates with almost
  half the overall diff, while the second largest part of the diff is in
  the i.MX clk driver that gained support for imx8mm SoCs. After that,
  we have the Actions Semiconductor and Qualcomm drivers rounding out
  the big part of the dirstat because they both got new hardware support
  for SoCs. The rest is just various updates and non-critical fixes for
  existing drivers.

  Core:
   - Convert a few clk bindings to JSON schema format
   - Add a {devm_}clk_get_optional() API
   - Add devm_clk_hw_register_clkdev() API to manage clkdev lookups
   - Start rewriting clk parent registration and supporting device links
     by moving around code that supports clk_get() and DT parsing of the
     'clocks' property

  New Drivers:
   - Add Qualcomm MSM8998 RPM managed clks
   - IPA clk support on Qualcomm RPMh clk controllers
   - Actions Semi S500 SoC clk support
   - Support for fixed rate clks populated from an MMIO register
   - Add RPC (QSPI/HyperFLASH) clocks on Renesas R-Car V3H
   - Add TMU (timer) clocks on Renesas RZ/G2E
   - Add Amlogic G12A Always-On Clock Controller
   - Add 32k clock generation for Amlogic AXG
   - Add support for the Mali GPU clocks on Amlogic Meson8
   - Add Amlogic G12A EE clock controller driver
   - Add missing CANFD clocks on Renesas RZ/G2M and RZ/G2E
   - Add i.MX8MM SoC clk driver support

  Removed Drivers:
   - Remove clps711x driver as the board support is gone

  Updates:
   - 3rd ECO fix for Mediatek MT2712 SoCs
   - Updates for Qualcomm MSM8998 GCC clks
   - Random static analysis fixes for clk drivers
   - Support for sleeping gpios in the clk-gpio type
   - Minor fixes for STM32MP1 clk driver (parents, critical flag, etc.)
   - Split LCDC into two clks on the Marvell MMP2 SoC
   - Various DT of_node refcount fixes
   - Get rid of CLK_IS_BASIC from TI code (yay!)
   - TI Autoidle clk support
   - Fix Amlogic Meson8 APB clock ID name
   - Claim input clocks through DT for Amlogic AXG and GXBB
   - Correct the DU (display unit) parent clock on Renesas RZ/G2E
   - Exynos5433 IMEM CMU crypto clk support (SlimSS)
   - Fix for the PLL-MIPI on the Allwinner A23
   - Fix Rockchip rk3328 PLL rate calculation
   - Add SET_RATE_PARENT flag on display clk of Rockhip rk3066
   - i.MX SCU clk driver clk_set_parent() and cpufreq support"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
  dt-bindings: clock: imx8mq: Fix numbering overlaps and gaps
  clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT
  clk: fixup default index for of_clk_get_by_name()
  clk: Move of_clk_*() APIs into clk.c from clkdev.c
  clk: Inform the core about consumer devices
  clk: Introduce of_clk_get_hw_from_clkspec()
  clk: core: clarify the check for runtime PM
  clk: Combine __clk_get() and __clk_create_clk()
  clk: imx8mq: add GPIO clocks to clock tree
  clk: mediatek: correct cpu clock name for MT8173 SoC
  clk: imx: Refactor entire sccg pll clk
  clk: imx: scu: add cpu frequency scaling support
  clk: mediatek: Mark bus and DRAM related clocks as critical
  clk: mediatek: Add flags to mtk_gate
  clk: mediatek: Add MUX_FLAGS macro
  clk: qcom: gcc-sdm845: Define parent of PCIe PIPE clocks
  clk: ingenic: Remove set but not used variable 'enable'
  clk: at91: programmable: remove unneeded register read
  clk: mediatek: using CLK_MUX_ROUND_CLOSEST for the clock of dpi1_sel
  clk: mediatek: add MUX_GATE_FLAGS_2
  ...
2019-03-14 08:46:17 -07:00
Mike Rapoport
8a7f97b902 treewide: add checks for the return value of memblock_alloc*()
Add check for the return value of memblock_alloc*() functions and call
panic() in case of error.  The panic message repeats the one used by
panicing memblock allocators with adjustment of parameters to include
only relevant ones.

The replacement was mostly automated with semantic patches like the one
below with manual massaging of format strings.

  @@
  expression ptr, size, align;
  @@
  ptr = memblock_alloc(size, align);
  + if (!ptr)
  + 	panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align);

[anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type]
  Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org
[rppt@linux.ibm.com: fix format strings for panics after memblock_alloc]
  Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com
[rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails]
  Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx
[akpm@linux-foundation.org: fix xtensa printk warning]
Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Guo Ren <ren_guo@c-sky.com>		[c-sky]
Acked-by: Paul Burton <paul.burton@mips.com>		[MIPS]
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>	[s390]
Reviewed-by: Juergen Gross <jgross@suse.com>		[Xen]
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
Acked-by: Max Filippov <jcmvbkbc@gmail.com>		[xtensa]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 10:04:02 -07:00
Tony Lindgren
d17a718db4 clk: ti: clkctrl: Fix clkdm_name regression for TI_CLK_CLKCTRL_COMPAT
Commit a72d785021 ("clk: ti: Prepare for remove of OF node name")
changed the code to use kasprintf() for provider->clkdm_name but also
changed the offset used later on by three. We don't need to change the
offset as we already have the extra three characters in the format for
kasprintf with "%pOFnxxx".

This caused the clocks with TI_CLK_CLKCTRL_COMPAT to have NULL
clk->clkdm_name for omap4 and 5. And null clkdm_name can cause module
reset, enable, and idle to fail.

The issue can also be seen also when enabling DEBUG for clkctrl.c
and then we start seeing "clock: could not associate" messages for
omap4 and 5 as the generated name is something like "l4_wkclkdm" instead
of "l4_wkup_clkdm" that's needed.

Let's fix the issue with a partial revert of commit a72d785021 ("clk:
ti: Prepare for remove of OF node name").

ALso note that in general code should not depend on the dts node names.
And the node names should be generic types like clock-domain in this case.
This could be fixed later by using separate compatible properties for the
clockdomains, or by adding soc_device_match() table with reg offsets
to the driver. But let's fix the regression first.

Fixes: a72d785021 ("clk: ti: Prepare for remove of OF node name")
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-03-08 10:35:07 -08:00
Stephen Boyd
e7faa095cb Merge branches 'clk-imx', 'clk-samsung', 'clk-ti', 'clk-uniphier-gear' and 'clk-mmp2-lcdc' into clk-next
- Split LCDC into two clks on the Marvell MMP2 SoC

* clk-imx:
  clk: imx8mq: add GPIO clocks to clock tree
  clk: imx: Refactor entire sccg pll clk
  clk: imx: scu: add cpu frequency scaling support
  clk: imx: imx8mm: Mark init function __init
  clk: imx8mq: Add the missing ARM clock
  dt-bindings: imx8mq-clock: Add the missing ARM clock
  clk: imx: imx8mq: Fix the rate propagation for arm pll
  clk: imx8mq: Add support for the CLKO1 clock
  clk: imx8mq: Fix the CLKO2 source select list
  clk: imx8mq: Add missing M4 clocks
  clk: imx: Add clock driver support for imx8mm
  dt-bindings: imx: Add clock binding doc for imx8mm
  clk: imx: Add PLLs driver for imx8mm soc
  clk: imx5: add imx5_SCC2_IPG_GATE
  clk: imx: scu: add set parent support
  clk: imx: scu: add fallback compatible string support
  clk: imx8mq: Make parent names arrays const pointers
  clk: imx: Make parents const pointer in mux wrappers
  clk: imx: Make parent_names const pointer in composite-8m

* clk-samsung:
  clk: samsung: s3c2443: Mark expected switch fall-through
  clk: samsung: exynos5: Fix kfree() of const memory on setting driver_override
  clk: samsung: exynos5: Fix possible NULL pointer exception on platform_device_alloc() failure
  clk: samsung: exynos5433: Add selected IMEM clocks
  clk: samsung: dt-bindings: Document Exynos5433 IMEM CMU
  clk: samsung: exynos5433: Fix name typo in sssx
  clk: samsung: exynos5433: Fix definition of CLK_ACLK_IMEM_{200, 266} clocks
  clk: samsung: dt-bindings: Add Exynos5433 IMEM CMU clock IDs

* clk-ti:
  clk: clk-twl6040: Fix imprecise external abort for pdmclk
  ARM: OMAP2+: hwmod: disable ick autoidling when a hwmod requires that
  clk: ti: check clock type before doing autoidle ops
  clk: ti: add a usecount for autoidle
  clk: ti: generalize the init sequence of clk_hw_omap clocks
  clk: ti: remove usage of CLK_IS_BASIC
  clk: ti: add new API for checking if a provided clock is an OMAP clock
  clk: ti: move clk_hw_omap list handling under generic part of the driver

* clk-uniphier-gear:
  clk: uniphier: Fix update register for CPU-gear

* clk-mmp2-lcdc:
  clk: mmp2: separate LCDC peripheral clk form the display clock
  dt-bindings: marvell,mmp2: Add clock id for the LCDC clock
2019-03-08 10:27:40 -08:00
Stephen Boyd
7e2570031a Merge branches 'clk-of-refcount', 'clk-mmio-fixed-clock', 'clk-remove-clps', 'clk-socfpga-parent' and 'clk-struct-size' into clk-next
- Various DT of_node refcount fixes
 - Support for fixed rate clks populated from an MMIO register
 - Remove clps711x driver as the board support is gone

* clk-of-refcount:
  clk: dove: fix refcount leak in dove_clk_init()
  clk: mv98dx3236: fix refcount leak in mv98dx3236_clk_init()
  clk: armada-xp: fix refcount leak in axp_clk_init()
  clk: kirkwood: fix refcount leak in kirkwood_clk_init()
  clk: armada-370: fix refcount leak in a370_clk_init()
  clk: vf610: fix refcount leak in vf610_clocks_init()
  clk: imx7d: fix refcount leak in imx7d_clocks_init()
  clk: imx6sx: fix refcount leak in imx6sx_clocks_init()
  clk: imx6q: fix refcount leak in imx6q_clocks_init()
  clk: samsung: exynos4: fix refcount leak in exynos4_get_xom()
  clk: socfpga: fix refcount leak
  clk: ti: fix refcount leak in ti_dt_clocks_register()
  clk: qoriq: fix refcount leak in clockgen_init()
  clk: highbank: fix refcount leak in hb_clk_init()

* clk-mmio-fixed-clock:
  clk: Add Fixed MMIO clock driver
  dt-bindings: clk: Add bindings for Fixed MMIO clock

* clk-remove-clps:
  clk: clps711x: Remove board support

* clk-socfpga-parent:
  clk: socfpga: Don't have get_parent for single parent ops

* clk-struct-size:
  clk: imx: imx7ulp: use struct_size() in kzalloc()
2019-03-08 10:26:59 -08:00
Andreas Kemnade
fddf4e29a6 clk: ti: check clock type before doing autoidle ops
Code might use autoidle api with clocks not being omap2 clocks,
so check if clock type is really omap2.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-02-15 16:47:55 +02:00
Andreas Kemnade
d277ce2d3a clk: ti: add a usecount for autoidle
Multiple users might deny autoidle on a clock. So we should have some
counting here, also according to the comment in  _setup_iclk_autoidle().
Also setting autoidle regs is not atomic, so there is another reason
for locking.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-02-15 16:47:55 +02:00
Tero Kristo
ead478250b clk: ti: generalize the init sequence of clk_hw_omap clocks
Add a generic API for initializing clocks of clk_hw_omap type clocks,
and convert the whole TI clock driver suite to use this for registering
the clocks. Also, get rid of the now redundant API for adding the clocks
to the OMAP HW clocks list; instead this is used directly from the
register API.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Keerthy <j-keerthy@ti.com>
2019-02-15 16:46:22 +02:00
Tero Kristo
8aa09cf322 clk: ti: remove usage of CLK_IS_BASIC
Remove the usage of CLK_IS_BASIC flag completely from TI clock driver.
In most cases, the use is completely redundant, but in some cases
we need to use the new API to check if the clock is an OMAP clock or not.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Keerthy <j-keerthy@ti.com>
2019-02-15 16:46:22 +02:00
Tero Kristo
7fd79ee78a clk: ti: add new API for checking if a provided clock is an OMAP clock
omap2_clk_is_hw_omap can now be used to verify if the provided clk_hw
is an omap HW clock or not. This is done to replace the usage of CLK_IS_BASIC
flag within the TI clock drivers.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Keerthy <j-keerthy@ti.com>
2019-02-15 16:46:21 +02:00
Tero Kristo
77b773aea5 clk: ti: move clk_hw_omap list handling under generic part of the driver
Currently the clk_hw_omap list is handled under the autoidle code, but
it should be accessible generically. Add a few APIs towards this, and
update the autoidle code to use the generic implementations.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Keerthy <j-keerthy@ti.com>
2019-02-15 16:46:21 +02:00
Dan Carpenter
303aef8b84 clk: ti: Fix error handling in ti_clk_parse_divider_data()
The ti_clk_parse_divider_data() function is only called from
_get_div_table_from_setup().  That function doesn't look at the return
value but instead looks at the "*table" pointer.  In this case, if the
kcalloc() fails then *table is NULL (which means success).  It should
instead be an error pointer.

The ti_clk_parse_divider_data() function has two callers.  One checks
for errors and the other doesn't.  I have fixed it so now both handle
errors.

Fixes: 4f6be5655d ("clk: ti: divider: add driver internal API for parsing divider data")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-01-24 11:23:32 -08:00
Yangtao Li
2274d8001f clk: ti: fix refcount leak in ti_dt_clocks_register()
The of_find_compatible_node() returns a node pointer with refcount
incremented, but there is the lack of use of the of_node_put() when
done. Add the missing of_node_put() to release the refcount.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Fixes: 5b385a45e0 ("clk: ti: add support for clkctrl aliases")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-28 11:27:08 -08:00
Rob Herring
87ab115185 clk: Use of_node_name_eq for node name comparisons
Convert string compares of DT node names to use of_node_name_eq helper
instead. This removes direct access to the node name pointer.

For instances using of_node_cmp, this has the side effect of now using
case sensitive comparisons. This should not matter for any FDT based
system which all of these are.

Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> (clk-mstp)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (ux500)
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-14 13:52:41 -08:00
Linus Torvalds
519f64bf15 This time it looks like a quieter release cycle in the clk tree. I guess that's
because of summer time holidays/vacations. The biggest change in the diffstat
 is in the Qualcomm clk driver, where they got support for CPUs and handful of
 SoCs. After that, the at91 driver got a major rewrite for newer DT bindings
 that should make things easier going forward and the TI code moved to a
 clockdomain based design. The long tail is mostly small driver updates for
 newer clks and some simpler SoC clock drivers such as the Hisilicon and imx
 support.
 
 In the core framework, we only have two small changes this time. One is a new
 clk API to get all clks for a device with the bulk clk APIs. This allows
 drivers that don't care about doing anything besides turning on all the clks to
 just clk_get() them all and turn them on. The other change is the beginning of
 a way to support save and restore of clk settings in the clk framework. TI is
 the only user right now, but we will want to expand upon this design in the
 future to support more save and restore of clk registers.  At least this gets
 us started and works well enough for one SoC, but there's more work in the
 future.
 
 Core:
  - clk_bulk_get_all() API and friends to get all the clks for a device
  - Basic clk state save/restore hooks
 
 New Drivers:
  - Renesas RZ/A2 (R7S9210) SoC, including early clocks
  - Rensas RZ/G1N (R8A7744) and RZ/G2E (R8A774C0) SoCs
  - Rensas RZ/G2M (r8a774a1) SoC
  - Qualcomm Krait CPU clk support
  - Qualcomm QCS404 GCC support
  - Qualcomm SDM660 GCC support
  - Qualcomm SDM845 camera clock controller
  - Ingenic jz4725b CGU
  - Hisilicon 3670 SoC support
  - TI SCI clks on K3 SoCs
  - iMX6 MMDC clks
  - Reset Controller (RMU) support for Actions Semi Owl S900 and S700 SoCs
 
 Updates:
  - Rework at91 PMC clock driver for new DT bindings
  - Nvidia Tegra clk driver MBIST workaround fix
  - S2RAM support for Marvell mvebu periph clks
  - Use updated printk format for OF node names
  - Fix TI code to only search DT subnodes
  - Various static analysis finds
  - Tag various drivers with SPDX license tags
  - Support dynamic frequency switching (DFS) on qcom SDM845 GCC
  - Only use s2mps11 dt-binding defines instead of redefining them in the driver
  - Add some more missing clks to qcom MSM8996 GCC
  - Quad SPI clks on qcom SDM845
  - Add support for CMT timer clocks on R-Car V3H
  - Add support for SHDI and various timer clocks on R-Car V3M
  - Improve OSC and RCLK (watchdog) handling on R-Car Gen3 SoCs
  - Amlogic clk-pll driver improvements and updates
  - Amlogic axg audio controller system clocks
  - Register Amlogic meson8b clock controller early
  - Add support for SATA and Fine Display Processor (FDP) clocks on R-Car M3-N
  - Consolidation of system suspend related code in Exynos, S5P, S3C SoC clk drivers
  - Fixes for system suspend support on Exynos542x (Odroid boards) and Exynos5433 SoC
  - Remove obsoleted Exynos4212 ISP clock definitions
  - Migrated TI am3/4/5 and dra7 SoCs to clockdomain based design
  - TI RTC+DDR sleep mode support for clock save/restore
  - Allwinner A64 display engine support and fixes
  - Allwinner A83t display engine support and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlvY4ysRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSVaDBAA3Wv/rsCn4FJ2ZgIWYWQqr69lAWDcBVVe
 4nNbFqzEmRoml8e+XOfVFwnbsai4B5ALVxyMnRlkDyxQ5TFQtF957U12Pf8upPa5
 R447YBt4tw40NCj8u5KNAaBmYYHdmXXDvsBPXyQn+1iy/9R8Is8AcDmv+D2ucuJF
 PPBXOwb+2CstUQhuwlXyvsAw/tqq/rJDVyAZVJUoqXJwlNMjr76V0m0ZXHN6NcyC
 F2SfnzIO4srRteTeKXVFcMU/3uHC3zofEfammSJjGZkk4WHULuPpkD17RMEyBul1
 Ju1S1nzGiKvYME/mmbIcRPNcpry65EVo/wn6IjAcG2m4GaWSq3F6qIttnoc6dnra
 R2VylIEy7HnNcAf8fkQdkd/l+h/TDp3iVrXg0p/rRxRk4Jlc86n2PWO6jtsZv4S+
 NySeRhTb51KrTl72J76LP+dfDWdbeZfkAqr0Qx6QM04OznVYSTHlnQaeM1Nx2SZR
 5+k126NdxDp7xgoJNfq18wzufrlefjuRTg2Kck1YuFuhV4Fjmq7ZC81bSSaakYPh
 /t073TcSZ+VfEYP5hVsl/pjMdFzHcj8pbavhs0UNIYLQNXe494Bm9PyYJOzQKnwz
 Zpbf7V6eplh8J1I03VI8RHviNp340iv2hhz9vp4mNP1vIhgdNiz7R2gn5sLSoFt+
 vei0J0vEzCA=
 =V5aK
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This time it looks like a quieter release cycle in the clk tree. I
  guess that's because of summer time holidays/vacations. The biggest
  change in the diffstat is in the Qualcomm clk driver, where they got
  support for CPUs and handful of SoCs. After that, the at91 driver got
  a major rewrite for newer DT bindings that should make things easier
  going forward and the TI code moved to a clockdomain based design.

  The long tail is mostly small driver updates for newer clks and some
  simpler SoC clock drivers such as the Hisilicon and imx support.

  In the core framework, we only have two small changes this time.

  One is a new clk API to get all clks for a device with the bulk clk
  APIs. This allows drivers that don't care about doing anything besides
  turning on all the clks to just clk_get() them all and turn them on.

  The other change is the beginning of a way to support save and restore
  of clk settings in the clk framework. TI is the only user right now,
  but we will want to expand upon this design in the future to support
  more save and restore of clk registers. At least this gets us started
  and works well enough for one SoC, but there's more work in the
  future.

  Core:
   - clk_bulk_get_all() API and friends to get all the clks for a device
   - Basic clk state save/restore hooks

  New Drivers:
   - Renesas RZ/A2 (R7S9210) SoC, including early clocks
   - Rensas RZ/G1N (R8A7744) and RZ/G2E (R8A774C0) SoCs
   - Rensas RZ/G2M (r8a774a1) SoC
   - Qualcomm Krait CPU clk support
   - Qualcomm QCS404 GCC support
   - Qualcomm SDM660 GCC support
   - Qualcomm SDM845 camera clock controller
   - Ingenic jz4725b CGU
   - Hisilicon 3670 SoC support
   - TI SCI clks on K3 SoCs
   - iMX6 MMDC clks
   - Reset Controller (RMU) support for Actions Semi Owl S900 and S700 SoCs

  Updates:
   - Rework at91 PMC clock driver for new DT bindings
   - Nvidia Tegra clk driver MBIST workaround fix
   - S2RAM support for Marvell mvebu periph clks
   - Use updated printk format for OF node names
   - Fix TI code to only search DT subnodes
   - Various static analysis finds
   - Tag various drivers with SPDX license tags
   - Support dynamic frequency switching (DFS) on qcom SDM845 GCC
   - Only use s2mps11 dt-binding defines instead of redefining them in the driver
   - Add some more missing clks to qcom MSM8996 GCC
   - Quad SPI clks on qcom SDM845
   - Add support for CMT timer clocks on R-Car V3H
   - Add support for SHDI and various timer clocks on R-Car V3M
   - Improve OSC and RCLK (watchdog) handling on R-Car Gen3 SoCs
   - Amlogic clk-pll driver improvements and updates
   - Amlogic axg audio controller system clocks
   - Register Amlogic meson8b clock controller early
   - Add support for SATA and Fine Display Processor (FDP) clocks on R-Car M3-N
   - Consolidation of system suspend related code in Exynos, S5P, S3C SoC clk drivers
   - Fixes for system suspend support on Exynos542x (Odroid boards) and Exynos5433 SoC
   - Remove obsoleted Exynos4212 ISP clock definitions
   - Migrated TI am3/4/5 and dra7 SoCs to clockdomain based design
   - TI RTC+DDR sleep mode support for clock save/restore
   - Allwinner A64 display engine support and fixes
   - Allwinner A83t display engine support and fixes"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (186 commits)
  clk: qcom: Remove unused arrays in SDM845 GCC
  clk: fixed-rate: fix of_node_get-put imbalance
  clk: s2mps11: Add used attribute to s2mps11_dt_match
  clk: qcom: gcc-sdm660: Add MODULE_LICENSE
  clk: qcom: Add safe switch hook for krait mux clocks
  dt-bindings: clock: Document qcom,krait-cc
  clk: qcom: Add Krait clock controller driver
  dt-bindings: arm: Document qcom,kpss-gcc
  clk: qcom: Add KPSS ACC/GCC driver
  clk: qcom: Add support for Krait clocks
  clk: qcom: Add IPQ806X's HFPLLs
  clk: qcom: Add MSM8960/APQ8064's HFPLLs
  dt-bindings: clock: Document qcom,hfpll
  clk: qcom: Add HFPLL driver
  clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
  ARM: Add Krait L2 register accessor functions
  clk: imx6q: add mmdc0 ipg clock
  clk: imx6sl: add mmdc ipg clocks
  clk: imx6sll: add mmdc1 ipg clock
  clk: imx6sx: add mmdc1 ipg clock
  ...
2018-10-31 11:08:30 -07:00
Mike Rapoport
7e1c4e2792 memblock: stop using implicit alignment to SMP_CACHE_BYTES
When a memblock allocation APIs are called with align = 0, the alignment
is implicitly set to SMP_CACHE_BYTES.

Implicit alignment is done deep in the memblock allocator and it can
come as a surprise.  Not that such an alignment would be wrong even
when used incorrectly but it is better to be explicit for the sake of
clarity and the prinicple of the least surprise.

Replace all such uses of memblock APIs with the 'align' parameter
explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment
in the memblock internal allocation functions.

For the case when memblock APIs are used via helper functions, e.g.  like
iommu_arena_new_node() in Alpha, the helper functions were detected with
Coccinelle's help and then manually examined and updated where
appropriate.

The direct memblock APIs users were updated using the semantic patch below:

@@
expression size, min_addr, max_addr, nid;
@@
(
|
- memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr,
nid)
|
- memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr,
nid)
|
- memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid)
|
- memblock_alloc(size, 0)
+ memblock_alloc(size, SMP_CACHE_BYTES)
|
- memblock_alloc_raw(size, 0)
+ memblock_alloc_raw(size, SMP_CACHE_BYTES)
|
- memblock_alloc_from(size, 0, min_addr)
+ memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr)
|
- memblock_alloc_nopanic(size, 0)
+ memblock_alloc_nopanic(size, SMP_CACHE_BYTES)
|
- memblock_alloc_low(size, 0)
+ memblock_alloc_low(size, SMP_CACHE_BYTES)
|
- memblock_alloc_low_nopanic(size, 0)
+ memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES)
|
- memblock_alloc_from_nopanic(size, 0, min_addr)
+ memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr)
|
- memblock_alloc_node(size, 0, nid)
+ memblock_alloc_node(size, SMP_CACHE_BYTES, nid)
)

[mhocko@suse.com: changelog update]
[akpm@linux-foundation.org: coding-style fixes]
[rppt@linux.ibm.com: fix missed uses of implicit alignment]
  Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx
Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Paul Burton <paul.burton@mips.com>	[MIPS]
Acked-by: Michael Ellerman <mpe@ellerman.id.au>	[powerpc]
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:16 -07:00
Mike Rapoport
57c8a661d9 mm: remove include/linux/bootmem.h
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.

The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>

@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>

[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
  Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:16 -07:00
Mike Rapoport
eb31d559f1 memblock: remove _virt from APIs returning virtual address
The conversion is done using

sed -i 's@memblock_virt_alloc@memblock_alloc@g' \
	$(git grep -l memblock_virt_alloc)

Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:15 -07:00
Stephen Boyd
8a69f1d470 Merge branch 'clk-ti' into clk-next
* clk-ti:
  clk: ti: Prepare for remove of OF node name
  clk: Clean up suspend/resume coding style
  clk: ti: Add functions to save/restore clk context
  clk: clk: Add clk_gate_restore_context function
  clk: Add functions to save/restore clock context en-masse
  clk: ti: dra7: add new clkctrl data
  clk: ti: dra7xx: rename existing clkctrl data as compat data
  clk: ti: am43xx: add new clkctrl data for am43xx
  clk: ti: am43xx: rename existing clkctrl data as compat data
  clk: ti: am33xx: add new clkctrl data for am33xx
  clk: ti: am33xx: rename existing clkctrl data as compat data
  clk: ti: clkctrl: replace dashes from clkdm name with underscore
  clk: ti: clkctrl: support multiple clkctrl nodes under a cm node
  dt-bindings: clock: dra7xx: add clkctrl indices for new data layout
  dt-bindings: clock: am43xx: add clkctrl indices for new data layout
  dt-bindings: clock: am33xx: add clkctrl indices for new data layout
2018-10-18 15:41:21 -07:00
Stephen Boyd
9710ee14be Merge branches 'clk-dt-name', 'clk-ti-of-node' and 'clk-sa' into clk-next
- Use updated printk format for OF node names
  - Fix TI code to only search DT subnodes
  - Various static analysis finds

* clk-dt-name:
  clk: Convert to using %pOFn instead of device_node.name

* clk-ti-of-node:
  clk: ti: fix OF child-node lookup

* clk-sa:
  clk: mvebu: armada-37xx-tbg: Switch to clk_get and balance it in probe
  reset: hisilicon: fix potential NULL pointer dereference
  clk: cdce925: release child device nodes
  clk: qcom: clk-branch: Use true and false for boolean values
2018-10-18 15:33:52 -07:00
Stephen Boyd
a72d785021 clk: ti: Prepare for remove of OF node name
Another patch is going to change this code to use %pOFn for DT node
names. Fix up the code to make this easy to pick this side of the merge
instead of fixing it up in a merge commit later.

Cc: Tero Kristo <t-kristo@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 08:39:02 -07:00
Russ Dill
d6e7bbc148 clk: ti: Add functions to save/restore clk context
SoCs like AM43XX lose clock registers context during RTC-only
suspend. Hence add functions to save/restore the clock registers
context.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
2018-10-03 15:29:19 +03:00
Tero Kristo
dffa9051d5 clk: ti: dra7: add new clkctrl data
The new clkctrl data layout for dra7xx is split based on clockdomain
boundaries. Previously the split was based on CM boundaries. This patch
adds the new data as separate data entity, retaining the compatibility
data also for now. The compatibility data can be removed once no longer
needed.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
2018-10-03 15:02:27 +03:00
Tero Kristo
43c56e046c clk: ti: dra7xx: rename existing clkctrl data as compat data
Rename the existing clkctrl data in preparation of upcoming clkdm
based split for it. Once the DT data has transitioned also, the
compat data can be removed.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
2018-10-03 15:02:27 +03:00
Tero Kristo
76a1049b84 clk: ti: am43xx: add new clkctrl data for am43xx
The new clkctrl data layout for am43xx is split based on clockdomain
boundaries. Previously the split was based on CM boundaries. This patch
adds the new data as separate data entity, retaining the compatibility
data also for now. The compatibility data can be removed once no longer
needed.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
2018-10-03 15:02:27 +03:00
Tero Kristo
131ee08f3f clk: ti: am43xx: rename existing clkctrl data as compat data
Rename the existing clkctrl data in preparation of upcoming clkdm
based split for it. Once the DT data has transitioned also, the
compat data can be removed.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
2018-10-03 15:02:26 +03:00
Tero Kristo
296e583e99 clk: ti: am33xx: add new clkctrl data for am33xx
The new clkctrl data layout for am33xx is split based on clockdomain
boundaries. Previously the split was based on CM boundaries. This patch
adds the new data as separate data entity, retaining the compatibility
data also for now. The compatibility data can be removed once no longer
needed.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
2018-10-03 15:02:26 +03:00
Tero Kristo
e97017f935 clk: ti: am33xx: rename existing clkctrl data as compat data
Rename the existing clkctrl data in preparation of upcoming clkdm
based split for it. Once the DT data has transitioned also, the
compat data can be removed.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
2018-10-03 15:02:26 +03:00