mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
9624d5c9c7
2414 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Srikar Dronamraju
|
e5e96fafd9 |
sched/topology: Set correct NUMA topology type
With the following commit: |
||
|
Jiada Wang
|
e73e81975f |
sched/debug: Fix potential deadlock when writing to sched_features
The following lockdep report can be triggered by writing to /sys/kernel/debug/sched_features: ====================================================== WARNING: possible circular locking dependency detected 4.18.0-rc6-00152-gcd3f77d74ac3-dirty #18 Not tainted ------------------------------------------------------ sh/3358 is trying to acquire lock: 000000004ad3989d (cpu_hotplug_lock.rw_sem){++++}, at: static_key_enable+0x14/0x30 but task is already holding lock: 00000000c1b31a88 (&sb->s_type->i_mutex_key#3){+.+.}, at: sched_feat_write+0x160/0x428 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&sb->s_type->i_mutex_key#3){+.+.}: lock_acquire+0xb8/0x148 down_write+0xac/0x140 start_creating+0x5c/0x168 debugfs_create_dir+0x18/0x220 opp_debug_register+0x8c/0x120 _add_opp_dev+0x104/0x1f8 dev_pm_opp_get_opp_table+0x174/0x340 _of_add_opp_table_v2+0x110/0x760 dev_pm_opp_of_add_table+0x5c/0x240 dev_pm_opp_of_cpumask_add_table+0x5c/0x100 cpufreq_init+0x160/0x430 cpufreq_online+0x1cc/0xe30 cpufreq_add_dev+0x78/0x198 subsys_interface_register+0x168/0x270 cpufreq_register_driver+0x1c8/0x278 dt_cpufreq_probe+0xdc/0x1b8 platform_drv_probe+0xb4/0x168 driver_probe_device+0x318/0x4b0 __device_attach_driver+0xfc/0x1f0 bus_for_each_drv+0xf8/0x180 __device_attach+0x164/0x200 device_initial_probe+0x10/0x18 bus_probe_device+0x110/0x178 device_add+0x6d8/0x908 platform_device_add+0x138/0x3d8 platform_device_register_full+0x1cc/0x1f8 cpufreq_dt_platdev_init+0x174/0x1bc do_one_initcall+0xb8/0x310 kernel_init_freeable+0x4b8/0x56c kernel_init+0x10/0x138 ret_from_fork+0x10/0x18 -> #2 (opp_table_lock){+.+.}: lock_acquire+0xb8/0x148 __mutex_lock+0x104/0xf50 mutex_lock_nested+0x1c/0x28 _of_add_opp_table_v2+0xb4/0x760 dev_pm_opp_of_add_table+0x5c/0x240 dev_pm_opp_of_cpumask_add_table+0x5c/0x100 cpufreq_init+0x160/0x430 cpufreq_online+0x1cc/0xe30 cpufreq_add_dev+0x78/0x198 subsys_interface_register+0x168/0x270 cpufreq_register_driver+0x1c8/0x278 dt_cpufreq_probe+0xdc/0x1b8 platform_drv_probe+0xb4/0x168 driver_probe_device+0x318/0x4b0 __device_attach_driver+0xfc/0x1f0 bus_for_each_drv+0xf8/0x180 __device_attach+0x164/0x200 device_initial_probe+0x10/0x18 bus_probe_device+0x110/0x178 device_add+0x6d8/0x908 platform_device_add+0x138/0x3d8 platform_device_register_full+0x1cc/0x1f8 cpufreq_dt_platdev_init+0x174/0x1bc do_one_initcall+0xb8/0x310 kernel_init_freeable+0x4b8/0x56c kernel_init+0x10/0x138 ret_from_fork+0x10/0x18 -> #1 (subsys mutex#6){+.+.}: lock_acquire+0xb8/0x148 __mutex_lock+0x104/0xf50 mutex_lock_nested+0x1c/0x28 subsys_interface_register+0xd8/0x270 cpufreq_register_driver+0x1c8/0x278 dt_cpufreq_probe+0xdc/0x1b8 platform_drv_probe+0xb4/0x168 driver_probe_device+0x318/0x4b0 __device_attach_driver+0xfc/0x1f0 bus_for_each_drv+0xf8/0x180 __device_attach+0x164/0x200 device_initial_probe+0x10/0x18 bus_probe_device+0x110/0x178 device_add+0x6d8/0x908 platform_device_add+0x138/0x3d8 platform_device_register_full+0x1cc/0x1f8 cpufreq_dt_platdev_init+0x174/0x1bc do_one_initcall+0xb8/0x310 kernel_init_freeable+0x4b8/0x56c kernel_init+0x10/0x138 ret_from_fork+0x10/0x18 -> #0 (cpu_hotplug_lock.rw_sem){++++}: __lock_acquire+0x203c/0x21d0 lock_acquire+0xb8/0x148 cpus_read_lock+0x58/0x1c8 static_key_enable+0x14/0x30 sched_feat_write+0x314/0x428 full_proxy_write+0xa0/0x138 __vfs_write+0xd8/0x388 vfs_write+0xdc/0x318 ksys_write+0xb4/0x138 sys_write+0xc/0x18 __sys_trace_return+0x0/0x4 other info that might help us debug this: Chain exists of: cpu_hotplug_lock.rw_sem --> opp_table_lock --> &sb->s_type->i_mutex_key#3 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sb->s_type->i_mutex_key#3); lock(opp_table_lock); lock(&sb->s_type->i_mutex_key#3); lock(cpu_hotplug_lock.rw_sem); *** DEADLOCK *** 2 locks held by sh/3358: #0: 00000000a8c4b363 (sb_writers#10){.+.+}, at: vfs_write+0x238/0x318 #1: 00000000c1b31a88 (&sb->s_type->i_mutex_key#3){+.+.}, at: sched_feat_write+0x160/0x428 stack backtrace: CPU: 5 PID: 3358 Comm: sh Not tainted 4.18.0-rc6-00152-gcd3f77d74ac3-dirty #18 Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT) Call trace: dump_backtrace+0x0/0x288 show_stack+0x14/0x20 dump_stack+0x13c/0x1ac print_circular_bug.isra.10+0x270/0x438 check_prev_add.constprop.16+0x4dc/0xb98 __lock_acquire+0x203c/0x21d0 lock_acquire+0xb8/0x148 cpus_read_lock+0x58/0x1c8 static_key_enable+0x14/0x30 sched_feat_write+0x314/0x428 full_proxy_write+0xa0/0x138 __vfs_write+0xd8/0x388 vfs_write+0xdc/0x318 ksys_write+0xb4/0x138 sys_write+0xc/0x18 __sys_trace_return+0x0/0x4 This is because when loading the cpufreq_dt module we first acquire cpu_hotplug_lock.rw_sem lock, then in cpufreq_init(), we are taking the &sb->s_type->i_mutex_key lock. But when writing to /sys/kernel/debug/sched_features, the cpu_hotplug_lock.rw_sem lock depends on the &sb->s_type->i_mutex_key lock. To fix this bug, reverse the lock acquisition order when writing to sched_features, this way cpu_hotplug_lock.rw_sem no longer depends on &sb->s_type->i_mutex_key. Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Eugeniu Rosca <erosca@de.adit-jv.com> Cc: George G. Davis <george_davis@mentor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180731121222.26195-1-jiada_wang@mentor.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Arnd Bergmann
|
474b9c777b |
y2038: sched: Change sched_rr_get_interval to use __kernel_timespec
This is a preparation patch for converting sys_sched_rr_get_interval to work with 64-bit time_t on 32-bit architectures. The 'interval' argument is changed to struct __kernel_timespec, which will be redefined using 64-bit time_t in the future. The compat version of the system call in turn is enabled for compilation with CONFIG_COMPAT_32BIT_TIME so the individual 32-bit architectures can share the handling of the traditional argument with 64-bit architectures providing it for their compat mode. Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Arnd Bergmann
|
9afc5eee65 |
y2038: globally rename compat_time to old_time32
Christoph Hellwig suggested a slightly different path for handling backwards compatibility with the 32-bit time_t based system calls: Rather than simply reusing the compat_sys_* entry points on 32-bit architectures unchanged, we get rid of those entry points and the compat_time types by renaming them to something that makes more sense on 32-bit architectures (which don't have a compat mode otherwise), and then share the entry points under the new name with the 64-bit architectures that use them for implementing the compatibility. The following types and interfaces are renamed here, and moved from linux/compat_time.h to linux/time32.h: old new --- --- compat_time_t old_time32_t struct compat_timeval struct old_timeval32 struct compat_timespec struct old_timespec32 struct compat_itimerspec struct old_itimerspec32 ns_to_compat_timeval() ns_to_old_timeval32() get_compat_itimerspec64() get_old_itimerspec32() put_compat_itimerspec64() put_old_itimerspec32() compat_get_timespec64() get_old_timespec32() compat_put_timespec64() put_old_timespec32() As we already have aliases in place, this patch addresses only the instances that are relevant to the system call interface in particular, not those that occur in device drivers and other modules. Those will get handled separately, while providing the 64-bit version of the respective interfaces. I'm not renaming the timex, rusage and itimerval structures, as we are still debating what the new interface will look like, and whether we will need a replacement at all. This also doesn't change the names of the syscall entry points, which can be done more easily when we actually switch over the 32-bit architectures to use them, at that point we need to change COMPAT_SYSCALL_DEFINEx to SYSCALL_DEFINEx with a new name, e.g. with a _time32 suffix. Suggested-by: Christoph Hellwig <hch@infradead.org> Link: https://lore.kernel.org/lkml/20180705222110.GA5698@infradead.org/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Linus Torvalds
|
cd9b44f907 |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: - the rest of MM - procfs updates - various misc things - more y2038 fixes - get_maintainer updates - lib/ updates - checkpatch updates - various epoll updates - autofs updates - hfsplus - some reiserfs work - fatfs updates - signal.c cleanups - ipc/ updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (166 commits) ipc/util.c: update return value of ipc_getref from int to bool ipc/util.c: further variable name cleanups ipc: simplify ipc initialization ipc: get rid of ids->tables_initialized hack lib/rhashtable: guarantee initial hashtable allocation lib/rhashtable: simplify bucket_table_alloc() ipc: drop ipc_lock() ipc/util.c: correct comment in ipc_obtain_object_check ipc: rename ipcctl_pre_down_nolock() ipc/util.c: use ipc_rcu_putref() for failues in ipc_addid() ipc: reorganize initialization of kern_ipc_perm.seq ipc: compute kern_ipc_perm.id under the ipc lock init/Kconfig: remove EXPERT from CHECKPOINT_RESTORE fs/sysv/inode.c: use ktime_get_real_seconds() for superblock stamp adfs: use timespec64 for time conversion kernel/sysctl.c: fix typos in comments drivers/rapidio/devices/rio_mport_cdev.c: remove redundant pointer md fork: don't copy inconsistent signal handler state to child signal: make get_signal() return bool signal: make sigkill_pending() return bool ... |
||
|
Christoph Hellwig
|
e05a8e4d88 |
sched/wait: assert the wait_queue_head lock is held in __wake_up_common
Better ensure we actually hold the lock using lockdep than just commenting on it. Due to the various exported _locked interfaces it is far too easy to get the locking wrong. Link: http://lkml.kernel.org/r/20171214152344.6880-4-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Baron <jbaron@akamai.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
dfec4a8478 |
More power management updates for 4.19-rc1
- Make the idle loop handle stopped scheduler tick correctly (Rafael
Wysocki).
- Prevent the menu cpuidle governor from letting CPUs spend too much
time in shallow idle states when it is invoked with scheduler tick
stopped and clean it up somewhat (Rafael Wysocki).
- Avoid invoking the platform firmware to make the platform enter
the ACPI S3 sleep state with suspended PCIe root ports which may
confuse the firmware and cause it to crash (Rafael Wysocki).
- Fix sysfs-related race in the ondemand and conservative cpufreq
governors which may cause the system to crash if the governor
module is removed during an update of CPU frequency limits (Henry
Willard).
- Select SRCU when building the system wakeup framework to avoid a
build issue in it (zhangyi).
- Make the descriptions of ACPI C-states vendor-neutral to avoid
confusion (Prarit Bhargava).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=9GrU
-----END PGP SIGNATURE-----
Merge tag 'pm-4.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These fix the main idle loop and the menu cpuidle governor, clean up
the latter, fix a mistake in the PCI bus type's support for system
suspend and resume, fix the ondemand and conservative cpufreq
governors, address a build issue in the system wakeup framework and
make the ACPI C-states desciptions less confusing.
Specifics:
- Make the idle loop handle stopped scheduler tick correctly (Rafael
Wysocki).
- Prevent the menu cpuidle governor from letting CPUs spend too much
time in shallow idle states when it is invoked with scheduler tick
stopped and clean it up somewhat (Rafael Wysocki).
- Avoid invoking the platform firmware to make the platform enter the
ACPI S3 sleep state with suspended PCIe root ports which may
confuse the firmware and cause it to crash (Rafael Wysocki).
- Fix sysfs-related race in the ondemand and conservative cpufreq
governors which may cause the system to crash if the governor
module is removed during an update of CPU frequency limits (Henry
Willard).
- Select SRCU when building the system wakeup framework to avoid a
build issue in it (zhangyi).
- Make the descriptions of ACPI C-states vendor-neutral to avoid
confusion (Prarit Bhargava)"
* tag 'pm-4.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: menu: Handle stopped tick more aggressively
sched: idle: Avoid retaining the tick when it has been stopped
PCI / ACPI / PM: Resume all bridges on suspend-to-RAM
cpuidle: menu: Update stale polling override comment
cpufreq: governor: Avoid accessing invalid governor_data
x86/ACPI/cstate: Make APCI C1 FFH MWAIT C-state description vendor-neutral
cpuidle: menu: Fix white space
PM / sleep: wakeup: Fix build error caused by missing SRCU support
|
||
|
Linus Torvalds
|
0214f46b3a |
Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull core signal handling updates from Eric Biederman:
"It was observed that a periodic timer in combination with a
sufficiently expensive fork could prevent fork from every completing.
This contains the changes to remove the need for that restart.
This set of changes is split into several parts:
- The first part makes PIDTYPE_TGID a proper pid type instead
something only for very special cases. The part starts using
PIDTYPE_TGID enough so that in __send_signal where signals are
actually delivered we know if the signal is being sent to a a group
of processes or just a single process.
- With that prep work out of the way the logic in fork is modified so
that fork logically makes signals received while it is running
appear to be received after the fork completes"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (22 commits)
signal: Don't send signals to tasks that don't exist
signal: Don't restart fork when signals come in.
fork: Have new threads join on-going signal group stops
fork: Skip setting TIF_SIGPENDING in ptrace_init_task
signal: Add calculate_sigpending()
fork: Unconditionally exit if a fatal signal is pending
fork: Move and describe why the code examines PIDNS_ADDING
signal: Push pid type down into complete_signal.
signal: Push pid type down into __send_signal
signal: Push pid type down into send_signal
signal: Pass pid type into do_send_sig_info
signal: Pass pid type into send_sigio_to_task & send_sigurg_to_task
signal: Pass pid type into group_send_sig_info
signal: Pass pid and pid type into send_sigqueue
posix-timers: Noralize good_sigevent
signal: Use PIDTYPE_TGID to clearly store where file signals will be sent
pid: Implement PIDTYPE_TGID
pids: Move the pgrp and session pid pointers from task_struct to signal_struct
kvm: Don't open code task_pid in kvm_vcpu_ioctl
pids: Compute task_tgid using signal->leader_pid
...
|
||
|
Linus Torvalds
|
7140ad3898 |
Updates for v4.19:
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of
a lot of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockde and the latency tracers
just get called directly (without using the trace events).
But because the original change cleaned up the code very nicely
we kept that, as well as the trace events for preempt and irqs
disabling, but they are limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not
allow them to be called in NMI context. Waiting till Paul makes
an NMI safe SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested
before the merge window opened.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW3ruhRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiM7AP47NhYdSnCFCRUJfrt6PovXmQtuCHt3
c3QMoGGdvzh9YAEAqcSXwh7uLhpHUp1LjMAPkXdZVwNddf4zJQ1zyxQ+EAU=
=vgEr
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of a lot
of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockdep and the latency tracers just
get called directly (without using the trace events). But because the
original change cleaned up the code very nicely we kept that, as well
as the trace events for preempt and irqs disabling, but they are
limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not allow
them to be called in NMI context. Waiting till Paul makes an NMI safe
SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested before
the merge window opened.
* tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
tracing: Fix SPDX format headers to use C++ style comments
tracing: Add SPDX License format tags to tracing files
tracing: Add SPDX License format to bpf_trace.c
blktrace: Add SPDX License format header
s390/ftrace: Add -mfentry and -mnop-mcount support
tracing: Add -mcount-nop option support
tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
tracing: Handle CC_FLAGS_FTRACE more accurately
Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
Uprobes: Simplify uprobe_register() body
tracepoints: Free early tracepoints after RCU is initialized
uprobes: Use synchronize_rcu() not synchronize_sched()
tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister()
ftrace: Remove unused pointer ftrace_swapper_pid
tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing/irqsoff: Handle preempt_count for different configs
tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing: irqsoff: Account for additional preempt_disable
trace: Use rcu_dereference_raw for hooks from trace-event subsystem
tracing/kprobes: Fix within_notrace_func() to check only notrace functions
...
|
||
|
Rafael J. Wysocki
|
7059b36636 |
sched: idle: Avoid retaining the tick when it has been stopped
If the tick has been stopped already, but the governor has not asked to
stop it (which it can do sometimes), the idle loop should invoke
tick_nohz_idle_stop_tick(), to let tick_nohz_stop_tick() take care
of this case properly.
Fixes:
|
||
|
Linus Torvalds
|
958f338e96 |
Merge branch 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Merge L1 Terminal Fault fixes from Thomas Gleixner:
"L1TF, aka L1 Terminal Fault, is yet another speculative hardware
engineering trainwreck. It's a hardware vulnerability which allows
unprivileged speculative access to data which is available in the
Level 1 Data Cache when the page table entry controlling the virtual
address, which is used for the access, has the Present bit cleared or
other reserved bits set.
If an instruction accesses a virtual address for which the relevant
page table entry (PTE) has the Present bit cleared or other reserved
bits set, then speculative execution ignores the invalid PTE and loads
the referenced data if it is present in the Level 1 Data Cache, as if
the page referenced by the address bits in the PTE was still present
and accessible.
While this is a purely speculative mechanism and the instruction will
raise a page fault when it is retired eventually, the pure act of
loading the data and making it available to other speculative
instructions opens up the opportunity for side channel attacks to
unprivileged malicious code, similar to the Meltdown attack.
While Meltdown breaks the user space to kernel space protection, L1TF
allows to attack any physical memory address in the system and the
attack works across all protection domains. It allows an attack of SGX
and also works from inside virtual machines because the speculation
bypasses the extended page table (EPT) protection mechanism.
The assoicated CVEs are: CVE-2018-3615, CVE-2018-3620, CVE-2018-3646
The mitigations provided by this pull request include:
- Host side protection by inverting the upper address bits of a non
present page table entry so the entry points to uncacheable memory.
- Hypervisor protection by flushing L1 Data Cache on VMENTER.
- SMT (HyperThreading) control knobs, which allow to 'turn off' SMT
by offlining the sibling CPU threads. The knobs are available on
the kernel command line and at runtime via sysfs
- Control knobs for the hypervisor mitigation, related to L1D flush
and SMT control. The knobs are available on the kernel command line
and at runtime via sysfs
- Extensive documentation about L1TF including various degrees of
mitigations.
Thanks to all people who have contributed to this in various ways -
patches, review, testing, backporting - and the fruitful, sometimes
heated, but at the end constructive discussions.
There is work in progress to provide other forms of mitigations, which
might be less horrible performance wise for a particular kind of
workloads, but this is not yet ready for consumption due to their
complexity and limitations"
* 'l1tf-final' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
x86/microcode: Allow late microcode loading with SMT disabled
tools headers: Synchronise x86 cpufeatures.h for L1TF additions
x86/mm/kmmio: Make the tracer robust against L1TF
x86/mm/pat: Make set_memory_np() L1TF safe
x86/speculation/l1tf: Make pmd/pud_mknotpresent() invert
x86/speculation/l1tf: Invert all not present mappings
cpu/hotplug: Fix SMT supported evaluation
KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry
x86/speculation: Use ARCH_CAPABILITIES to skip L1D flush on vmentry
x86/speculation: Simplify sysfs report of VMX L1TF vulnerability
Documentation/l1tf: Remove Yonah processors from not vulnerable list
x86/KVM/VMX: Don't set l1tf_flush_l1d from vmx_handle_external_intr()
x86/irq: Let interrupt handlers set kvm_cpu_l1tf_flush_l1d
x86: Don't include linux/irq.h from asm/hardirq.h
x86/KVM/VMX: Introduce per-host-cpu analogue of l1tf_flush_l1d
x86/irq: Demote irq_cpustat_t::__softirq_pending to u16
x86/KVM/VMX: Move the l1tf_flush_l1d test to vmx_l1d_flush()
x86/KVM/VMX: Replace 'vmx_l1d_flush_always' with 'vmx_l1d_flush_cond'
x86/KVM/VMX: Don't set l1tf_flush_l1d to true from vmx_l1d_flush()
cpu/hotplug: detect SMT disabled by BIOS
...
|
||
|
Linus Torvalds
|
13e091b6dd |
Merge branch 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer updates from Thomas Gleixner: "Early TSC based time stamping to allow better boot time analysis. This comes with a general cleanup of the TSC calibration code which grew warts and duct taping over the years and removes 250 lines of code. Initiated and mostly implemented by Pavel with help from various folks" * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) x86/kvmclock: Mark kvm_get_preset_lpj() as __init x86/tsc: Consolidate init code sched/clock: Disable interrupts when calling generic_sched_clock_init() timekeeping: Prevent false warning when persistent clock is not available sched/clock: Close a hole in sched_clock_init() x86/tsc: Make use of tsc_calibrate_cpu_early() x86/tsc: Split native_calibrate_cpu() into early and late parts sched/clock: Use static key for sched_clock_running sched/clock: Enable sched clock early sched/clock: Move sched clock initialization and merge with generic clock x86/tsc: Use TSC as sched clock early x86/tsc: Initialize cyc2ns when tsc frequency is determined x86/tsc: Calibrate tsc only once ARM/time: Remove read_boot_clock64() s390/time: Remove read_boot_clock64() timekeeping: Default boot time offset to local_clock() timekeeping: Replace read_boot_clock64() with read_persistent_wall_and_boot_offset() s390/time: Add read_persistent_wall_and_boot_offset() x86/xen/time: Output xen sched_clock time from 0 x86/xen/time: Initialize pv xen time in init_hypervisor_platform() ... |
||
|
Linus Torvalds
|
de5d1b39ea |
Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking/atomics update from Thomas Gleixner:
"The locking, atomics and memory model brains delivered:
- A larger update to the atomics code which reworks the ordering
barriers, consolidates the atomic primitives, provides the new
atomic64_fetch_add_unless() primitive and cleans up the include
hell.
- Simplify cmpxchg() instrumentation and add instrumentation for
xchg() and cmpxchg_double().
- Updates to the memory model and documentation"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
locking/atomics: Rework ordering barriers
locking/atomics: Instrument cmpxchg_double*()
locking/atomics: Instrument xchg()
locking/atomics: Simplify cmpxchg() instrumentation
locking/atomics/x86: Reduce arch_cmpxchg64*() instrumentation
tools/memory-model: Rename litmus tests to comply to norm7
tools/memory-model/Documentation: Fix typo, smb->smp
sched/Documentation: Update wake_up() & co. memory-barrier guarantees
locking/spinlock, sched/core: Clarify requirements for smp_mb__after_spinlock()
sched/core: Use smp_mb() in wake_woken_function()
tools/memory-model: Add informal LKMM documentation to MAINTAINERS
locking/atomics/Documentation: Describe atomic_set() as a write operation
tools/memory-model: Make scripts executable
tools/memory-model: Remove ACCESS_ONCE() from model
tools/memory-model: Remove ACCESS_ONCE() from recipes
locking/memory-barriers.txt/kokr: Update Korean translation to fix broken DMA vs. MMIO ordering example
MAINTAINERS: Add Daniel Lustig as an LKMM reviewer
tools/memory-model: Fix ISA2+pooncelock+pooncelock+pombonce name
tools/memory-model: Add litmus test for full multicopy atomicity
locking/refcount: Always allow checked forms
...
|
||
|
Thomas Gleixner
|
f2701b77bb |
Merge 4.18-rc7 into master to pick up the KVM dependcy
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
||
|
Eric W. Biederman
|
088fe47ce9 |
signal: Add calculate_sigpending()
Add a function calculate_sigpending to test to see if any signals are
pending for a new task immediately following fork. Signals have to
happen either before or after fork. Today our practice is to push
all of the signals to before the fork, but that has the downside that
frequent or periodic signals can make fork take much much longer than
normal or prevent fork from completing entirely.
So we need move signals that we can after the fork to prevent that.
This updates the code to set TIF_SIGPENDING on a new task if there
are signals or other activities that have moved so that they appear
to happen after the fork.
As the code today restarts if it sees any such activity this won't
immediately have an effect, as there will be no reason for it
to set TIF_SIGPENDING immediately after the fork.
Adding calculate_sigpending means the code in fork can safely be
changed to not always restart if a signal is pending.
The new calculate_sigpending function sets sigpending if there
are pending bits in jobctl, pending signals, the freezer needs
to freeze the new task or the live kernel patching framework
need the new thread to take the slow path to userspace.
I have verified that setting TIF_SIGPENDING does make a new process
take the slow path to userspace before it executes it's first userspace
instruction.
I have looked at the callers of signal_wake_up and the code paths
setting TIF_SIGPENDING and I don't see anything else that needs to be
handled. The code probably doesn't need to set TIF_SIGPENDING for the
kernel live patching as it uses a separate thread flag as well. But
at this point it seems safer reuse the recalc_sigpending logic and get
the kernel live patching folks to sort out their story later.
V2: I have moved the test into schedule_tail where siglock can
be grabbed and recalc_sigpending can be reused directly.
Further as the last action of setting up a new task this
guarantees that TIF_SIGPENDING will be properly set in the
new process.
The helper calculate_sigpending takes the siglock and
uncontitionally sets TIF_SIGPENDING and let's recalc_sigpending
clear TIF_SIGPENDING if it is unnecessary. This allows reusing
the existing code and keeps maintenance of the conditions simple.
Oleg Nesterov <oleg@redhat.com> suggested the movement
and pointed out the need to take siglock if this code
was going to be called while the new task is discoverable.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
||
|
Joel Fernandes (Google)
|
c3bc8fd637 |
tracing: Centralize preemptirq tracepoints and unify their usage
This patch detaches the preemptirq tracepoints from the tracers and
keeps it separate.
Advantages:
* Lockdep and irqsoff event can now run in parallel since they no longer
have their own calls.
* This unifies the usecase of adding hooks to an irqsoff and irqson
event, and a preemptoff and preempton event.
3 users of the events exist:
- Lockdep
- irqsoff and preemptoff tracers
- irqs and preempt trace events
The unification cleans up several ifdefs and makes the code in preempt
tracer and irqsoff tracers simpler. It gets rid of all the horrific
ifdeferry around PROVE_LOCKING and makes configuration of the different
users of the tracepoints more easy and understandable. It also gets rid
of the time_* function calls from the lockdep hooks used to call into
the preemptirq tracer which is not needed anymore. The negative delta in
lines of code in this patch is quite large too.
In the patch we introduce a new CONFIG option PREEMPTIRQ_TRACEPOINTS
as a single point for registering probes onto the tracepoints. With
this,
the web of config options for preempt/irq toggle tracepoints and its
users becomes:
PREEMPT_TRACER PREEMPTIRQ_EVENTS IRQSOFF_TRACER PROVE_LOCKING
| | \ | |
\ (selects) / \ \ (selects) /
TRACE_PREEMPT_TOGGLE ----> TRACE_IRQFLAGS
\ /
\ (depends on) /
PREEMPTIRQ_TRACEPOINTS
Other than the performance tests mentioned in the previous patch, I also
ran the locking API test suite. I verified that all tests cases are
passing.
I also injected issues by not registering lockdep probes onto the
tracepoints and I see failures to confirm that the probes are indeed
working.
This series + lockdep probes not registered (just to inject errors):
[ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/12:FAILED|FAILED| ok |
[ 0.000000] sirq-safe-A => hirqs-on/21:FAILED|FAILED| ok |
[ 0.000000] hard-safe-A + irqs-on/12:FAILED|FAILED| ok |
[ 0.000000] soft-safe-A + irqs-on/12:FAILED|FAILED| ok |
[ 0.000000] hard-safe-A + irqs-on/21:FAILED|FAILED| ok |
[ 0.000000] soft-safe-A + irqs-on/21:FAILED|FAILED| ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
With this series + lockdep probes registered, all locking tests pass:
[ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
Link: http://lkml.kernel.org/r/20180730222423.196630-4-joel@joelfernandes.org
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
||
|
Pavel Tatashin
|
bd9f943e5d |
sched/clock: Disable interrupts when calling generic_sched_clock_init()
sched_clock_init() used be called early during boot when interrupts were
still disabled. After the recent changes to utilize sched clock early the
sched_clock_init() call happens when interrupts are already enabled, which
triggers the following warning:
WARNING: CPU: 0 PID: 0 at kernel/time/sched_clock.c:180 sched_clock_register+0x44/0x278
[<c001a13c>] (warn_slowpath_null) from [<c052367c>] (sched_clock_register+0x44/0x278)
[<c052367c>] (sched_clock_register) from [<c05238d8>] (generic_sched_clock_init+0x28/0x88)
[<c05238d8>] (generic_sched_clock_init) from [<c0521a00>] (sched_clock_init+0x54/0x74)
[<c0521a00>] (sched_clock_init) from [<c0519c18>] (start_kernel+0x310/0x3e4)
[<c0519c18>] (start_kernel) from [<00000000>] ( (null))
Disable IRQs for the duration of generic_sched_clock_init().
Fixes:
|
||
|
Srikar Dronamraju
|
b6a60cf36d |
sched/numa: Move task_numa_placement() closer to numa_migrate_preferred()
numa_migrate_preferred() is called periodically or when task preferred node changes. Preferred node evaluations happen once per scan sequence. If the scan completion happens just after the periodic NUMA migration, then we try to migrate to the preferred node and the preferred node might change, needing another node migration. Avoid this by checking for scan sequence completion only when checking for periodic migration. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25862.6 26158.1 1.14258 1 74357 72725 -2.19482 Running SPECjbb2005 on a 16 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 8 117019 113992 -2.58 1 179095 174947 -2.31 (numbers from v1 based on v4.17-rc5) Testcase Time: Min Max Avg StdDev numa01.sh Real: 449.46 770.77 615.22 101.70 numa01.sh Sys: 132.72 208.17 170.46 24.96 numa01.sh User: 39185.26 60290.89 50066.76 6807.84 numa02.sh Real: 60.85 61.79 61.28 0.37 numa02.sh Sys: 15.34 24.71 21.08 3.61 numa02.sh User: 5204.41 5249.85 5231.21 17.60 numa03.sh Real: 785.50 916.97 840.77 44.98 numa03.sh Sys: 108.08 133.60 119.43 8.82 numa03.sh User: 61422.86 70919.75 64720.87 3310.61 numa04.sh Real: 429.57 587.37 480.80 57.40 numa04.sh Sys: 240.61 321.97 290.84 33.58 numa04.sh User: 34597.65 40498.99 37079.48 2060.72 numa05.sh Real: 392.09 431.25 414.65 13.82 numa05.sh Sys: 229.41 372.48 297.54 53.14 numa05.sh User: 33390.86 34697.49 34222.43 556.42 Testcase Time: Min Max Avg StdDev %Change numa01.sh Real: 424.63 566.18 498.12 59.26 23.50% numa01.sh Sys: 160.19 256.53 208.98 37.02 -18.4% numa01.sh User: 37320.00 46225.58 42001.57 3482.45 19.20% numa02.sh Real: 60.17 62.47 60.91 0.85 0.607% numa02.sh Sys: 15.30 22.82 17.04 2.90 23.70% numa02.sh User: 5202.13 5255.51 5219.08 20.14 0.232% numa03.sh Real: 823.91 844.89 833.86 8.46 0.828% numa03.sh Sys: 130.69 148.29 140.47 6.21 -14.9% numa03.sh User: 62519.15 64262.20 63613.38 620.05 1.740% numa04.sh Real: 515.30 603.74 548.56 30.93 -12.3% numa04.sh Sys: 459.73 525.48 489.18 21.63 -40.5% numa04.sh User: 40561.96 44919.18 42047.87 1526.85 -11.8% numa05.sh Real: 396.58 454.37 421.13 19.71 -1.53% numa05.sh Sys: 208.72 422.02 348.90 73.60 -14.7% numa05.sh User: 33124.08 36109.35 34846.47 1089.74 -1.79% Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-20-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
f35678b6a1 |
sched/numa: Use group_weights to identify if migration degrades locality
On NUMA_BACKPLANE and NUMA_GLUELESS_MESH systems, tasks/memory should be consolidated to the closest group of nodes. In such a case, relying on group_fault metric may not always help to consolidate. There can always be a case where a node closer to the preferred node may have lesser faults than a node further away from the preferred node. In such a case, moving to node with more faults might avoid numa consolidation. Using group_weight would help to consolidate task/memory around the preferred_node. While here, to be on the conservative side, don't override migrate thread degrades locality logic for CPU_NEWLY_IDLE load balancing. Note: Similar problems exist with should_numa_migrate_memory and will be dealt separately. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25645.4 25960 1.22 1 72142 73550 1.95 Running SPECjbb2005 on a 16 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 8 110199 120071 8.958 1 176303 176249 -0.03 (numbers from v1 based on v4.17-rc5) Testcase Time: Min Max Avg StdDev numa01.sh Real: 490.04 774.86 596.26 96.46 numa01.sh Sys: 151.52 242.88 184.82 31.71 numa01.sh User: 41418.41 60844.59 48776.09 6564.27 numa02.sh Real: 60.14 62.94 60.98 1.00 numa02.sh Sys: 16.11 30.77 21.20 5.28 numa02.sh User: 5184.33 5311.09 5228.50 44.24 numa03.sh Real: 790.95 856.35 826.41 24.11 numa03.sh Sys: 114.93 118.85 117.05 1.63 numa03.sh User: 60990.99 64959.28 63470.43 1415.44 numa04.sh Real: 434.37 597.92 504.87 59.70 numa04.sh Sys: 237.63 397.40 289.74 55.98 numa04.sh User: 34854.87 41121.83 38572.52 2615.84 numa05.sh Real: 386.77 448.90 417.22 22.79 numa05.sh Sys: 149.23 379.95 303.04 79.55 numa05.sh User: 32951.76 35959.58 34562.18 1034.05 Testcase Time: Min Max Avg StdDev %Change numa01.sh Real: 493.19 672.88 597.51 59.38 -0.20% numa01.sh Sys: 150.09 245.48 207.76 34.26 -11.0% numa01.sh User: 41928.51 53779.17 48747.06 3901.39 0.059% numa02.sh Real: 60.63 62.87 61.22 0.83 -0.39% numa02.sh Sys: 16.64 27.97 20.25 4.06 4.691% numa02.sh User: 5222.92 5309.60 5254.03 29.98 -0.48% numa03.sh Real: 821.52 902.15 863.60 32.41 -4.30% numa03.sh Sys: 112.04 130.66 118.35 7.08 -1.09% numa03.sh User: 62245.16 69165.14 66443.04 2450.32 -4.47% numa04.sh Real: 414.53 519.57 476.25 37.00 6.009% numa04.sh Sys: 181.84 335.67 280.41 54.07 3.327% numa04.sh User: 33924.50 39115.39 37343.78 1934.26 3.290% numa05.sh Real: 408.30 441.45 417.90 12.05 -0.16% numa05.sh Sys: 233.41 381.60 295.58 57.37 2.523% numa05.sh User: 33301.31 35972.50 34335.19 938.94 0.661% Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-16-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
30619c89b1 |
sched/numa: Update the scan period without holding the numa_group lock
The metrics for updating scan periods are local or task specific. Currently this update happens under the numa_group lock, which seems unnecessary. Hence move this update outside the lock. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25355.9 25645.4 1.141 1 72812 72142 -0.92 Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Rik van Riel <riel@surriel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-15-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
2d4056fafa |
sched/numa: Remove numa_has_capacity()
task_numa_find_cpu() helps to find the CPU to swap/move the task to. It's guarded by numa_has_capacity(). However node not having capacity shouldn't deter a task swapping if it helps NUMA placement. Further load_too_imbalanced(), which evaluates possibilities of move/swap, provides similar checks as numa_has_capacity. Hence remove numa_has_capacity() to enhance possibilities of task swapping even if load is imbalanced. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25657.9 25804.1 0.569 1 74435 73413 -1.37 Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rik van Riel <riel@surriel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-13-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
0ad4e3dfe6 |
sched/numa: Modify migrate_swap() to accept additional parameters
There are checks in migrate_swap_stop() that check if the task/CPU combination is as per migrate_swap_arg before migrating. However atleast one of the two tasks to be swapped by migrate_swap() could have migrated to a completely different CPU before updating the migrate_swap_arg. The new CPU where the task is currently running could be a different node too. If the task has migrated, numa balancer might end up placing a task in a wrong node. Instead of achieving node consolidation, it may end up spreading the load across nodes. To avoid that pass the CPUs as additional parameters. While here, place migrate_swap under CONFIG_NUMA_BALANCING. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25377.3 25226.6 -0.59 1 72287 73326 1.437 Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Rik van Riel <riel@surriel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-10-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
10864a9e22 |
sched/numa: Remove unused task_capacity from 'struct numa_stats'
The task_capacity field in 'struct numa_stats' is redundant. Also move nr_running for better packing within the struct. No functional changes. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25308.6 25377.3 0.271 1 72964 72287 -0.92 Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Rik van Riel <riel@surriel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-9-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
0ee7e74dc0 |
sched/numa: Skip nodes that are at 'hoplimit'
When comparing two nodes at a distance of 'hoplimit', we should consider nodes only up to 'hoplimit'. Currently we also consider nodes at 'oplimit' distance too. Hence two nodes at a distance of 'hoplimit' will have same groupweight. Fix this by skipping nodes at hoplimit. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25375.3 25308.6 -0.26 1 72617 72964 0.477 Running SPECjbb2005 on a 16 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 8 113372 108750 -4.07684 1 177403 183115 3.21979 (numbers from v1 based on v4.17-rc5) Testcase Time: Min Max Avg StdDev numa01.sh Real: 478.45 565.90 515.11 30.87 numa01.sh Sys: 207.79 271.04 232.94 21.33 numa01.sh User: 39763.93 47303.12 43210.73 2644.86 numa02.sh Real: 60.00 61.46 60.78 0.49 numa02.sh Sys: 15.71 25.31 20.69 3.42 numa02.sh User: 5175.92 5265.86 5235.97 32.82 numa03.sh Real: 776.42 834.85 806.01 23.22 numa03.sh Sys: 114.43 128.75 121.65 5.49 numa03.sh User: 60773.93 64855.25 62616.91 1576.39 numa04.sh Real: 456.93 511.95 482.91 20.88 numa04.sh Sys: 178.09 460.89 356.86 94.58 numa04.sh User: 36312.09 42553.24 39623.21 2247.96 numa05.sh Real: 393.98 493.48 436.61 35.59 numa05.sh Sys: 164.49 329.15 265.87 61.78 numa05.sh User: 33182.65 36654.53 35074.51 1187.71 Testcase Time: Min Max Avg StdDev %Change numa01.sh Real: 414.64 819.20 556.08 147.70 -7.36% numa01.sh Sys: 77.52 205.04 139.40 52.05 67.10% numa01.sh User: 37043.24 61757.88 45517.48 9290.38 -5.06% numa02.sh Real: 60.80 63.32 61.63 0.88 -1.37% numa02.sh Sys: 17.35 39.37 25.71 7.33 -19.5% numa02.sh User: 5213.79 5374.73 5268.90 55.09 -0.62% numa03.sh Real: 780.09 948.64 831.43 63.02 -3.05% numa03.sh Sys: 104.96 136.92 116.31 11.34 4.591% numa03.sh User: 60465.42 73339.78 64368.03 4700.14 -2.72% numa04.sh Real: 412.60 681.92 521.29 96.64 -7.36% numa04.sh Sys: 210.32 314.10 251.77 37.71 41.74% numa04.sh User: 34026.38 45581.20 38534.49 4198.53 2.825% numa05.sh Real: 394.79 439.63 411.35 16.87 6.140% numa05.sh Sys: 238.32 330.09 292.31 38.32 -9.04% numa05.sh User: 33456.45 34876.07 34138.62 609.45 2.741% While there is a regression with this change, this change is needed from a correctness perspective. Also it helps consolidation as seen from perf bench output. Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Rik van Riel <riel@surriel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-8-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
67d9f6c256 |
sched/debug: Reverse the order of printing faults
Fix the order in which the private and shared numa faults are getting printed. No functional changes. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25215.7 25375.3 0.63 1 72107 72617 0.70 Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Rik van Riel <riel@surriel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-7-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
f03bb6760b |
sched/numa: Use task faults only if numa_group is not yet set up
When numa_group faults are available, task_numa_placement only uses numa_group faults to evaluate preferred node. However it still accounts task faults and even evaluates the preferred node just based on task faults just to discard it in favour of preferred node chosen on the basis of numa_group. Instead use task faults only if numa_group is not set. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25549.6 25215.7 -1.30 1 73190 72107 -1.47 Running SPECjbb2005 on a 16 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 8 113437 113372 -0.05 1 196130 177403 -9.54 (numbers from v1 based on v4.17-rc5) Testcase Time: Min Max Avg StdDev numa01.sh Real: 506.35 794.46 599.06 104.26 numa01.sh Sys: 150.37 223.56 195.99 24.94 numa01.sh User: 43450.69 61752.04 49281.50 6635.33 numa02.sh Real: 60.33 62.40 61.31 0.90 numa02.sh Sys: 18.12 31.66 24.28 5.89 numa02.sh User: 5203.91 5325.32 5260.29 49.98 numa03.sh Real: 696.47 853.62 745.80 57.28 numa03.sh Sys: 85.68 123.71 97.89 13.48 numa03.sh User: 55978.45 66418.63 59254.94 3737.97 numa04.sh Real: 444.05 514.83 497.06 26.85 numa04.sh Sys: 230.39 375.79 316.23 48.58 numa04.sh User: 35403.12 41004.10 39720.80 2163.08 numa05.sh Real: 423.09 460.41 439.57 13.92 numa05.sh Sys: 287.38 480.15 369.37 68.52 numa05.sh User: 34732.12 38016.80 36255.85 1070.51 Testcase Time: Min Max Avg StdDev %Change numa01.sh Real: 478.45 565.90 515.11 30.87 16.29% numa01.sh Sys: 207.79 271.04 232.94 21.33 -15.8% numa01.sh User: 39763.93 47303.12 43210.73 2644.86 14.04% numa02.sh Real: 60.00 61.46 60.78 0.49 0.871% numa02.sh Sys: 15.71 25.31 20.69 3.42 17.35% numa02.sh User: 5175.92 5265.86 5235.97 32.82 0.464% numa03.sh Real: 776.42 834.85 806.01 23.22 -7.47% numa03.sh Sys: 114.43 128.75 121.65 5.49 -19.5% numa03.sh User: 60773.93 64855.25 62616.91 1576.39 -5.36% numa04.sh Real: 456.93 511.95 482.91 20.88 2.930% numa04.sh Sys: 178.09 460.89 356.86 94.58 -11.3% numa04.sh User: 36312.09 42553.24 39623.21 2247.96 0.246% numa05.sh Real: 393.98 493.48 436.61 35.59 0.677% numa05.sh Sys: 164.49 329.15 265.87 61.78 38.92% numa05.sh User: 33182.65 36654.53 35074.51 1187.71 3.368% Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-6-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
8cd45eee43 |
sched/numa: Set preferred_node based on best_cpu
Currently preferred node is set to dst_nid which is the last node in the iteration whose group weight or task weight is greater than the current node. However it doesn't guarantee that dst_nid has the numa capacity to move. It also doesn't guarantee that dst_nid has the best_cpu which is the CPU/node ideal for node migration. Lets consider faults on a 4 node system with group weight numbers in different nodes being in 0 < 1 < 2 < 3 proportion. Consider the task is running on 3 and 0 is its preferred node but its capacity is full. Consider nodes 1, 2 and 3 have capacity. Then the task should be migrated to node 1. Currently the task gets moved to node 2. env.dst_nid points to the last node whose faults were greater than current node. Modify to set the preferred node based of best_cpu. Earlier setting preferred node was skipped if nr_active_nodes is 1. This could result in the task being moved out of the preferred node to a random node during regular load balancing. Also while modifying task_numa_migrate(), use sched_setnuma to set preferred node. This ensures out numa accounting is correct. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25122.9 25549.6 1.698 1 73850 73190 -0.89 Running SPECjbb2005 on a 16 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 8 105930 113437 7.08676 1 178624 196130 9.80047 (numbers from v1 based on v4.17-rc5) Testcase Time: Min Max Avg StdDev numa01.sh Real: 435.78 653.81 534.58 83.20 numa01.sh Sys: 121.93 187.18 145.90 23.47 numa01.sh User: 37082.81 51402.80 43647.60 5409.75 numa02.sh Real: 60.64 61.63 61.19 0.40 numa02.sh Sys: 14.72 25.68 19.06 4.03 numa02.sh User: 5210.95 5266.69 5233.30 20.82 numa03.sh Real: 746.51 808.24 780.36 23.88 numa03.sh Sys: 97.26 108.48 105.07 4.28 numa03.sh User: 58956.30 61397.05 60162.95 1050.82 numa04.sh Real: 465.97 519.27 484.81 19.62 numa04.sh Sys: 304.43 359.08 334.68 20.64 numa04.sh User: 37544.16 41186.15 39262.44 1314.91 numa05.sh Real: 411.57 457.20 433.29 16.58 numa05.sh Sys: 230.05 435.48 339.95 67.58 numa05.sh User: 33325.54 36896.31 35637.84 1222.64 Testcase Time: Min Max Avg StdDev %Change numa01.sh Real: 506.35 794.46 599.06 104.26 -10.76% numa01.sh Sys: 150.37 223.56 195.99 24.94 -25.55% numa01.sh User: 43450.69 61752.04 49281.50 6635.33 -11.43% numa02.sh Real: 60.33 62.40 61.31 0.90 -0.195% numa02.sh Sys: 18.12 31.66 24.28 5.89 -21.49% numa02.sh User: 5203.91 5325.32 5260.29 49.98 -0.513% numa03.sh Real: 696.47 853.62 745.80 57.28 4.6339% numa03.sh Sys: 85.68 123.71 97.89 13.48 7.3347% numa03.sh User: 55978.45 66418.63 59254.94 3737.97 1.5323% numa04.sh Real: 444.05 514.83 497.06 26.85 -2.464% numa04.sh Sys: 230.39 375.79 316.23 48.58 5.8343% numa04.sh User: 35403.12 41004.10 39720.80 2163.08 -1.153% numa05.sh Real: 423.09 460.41 439.57 13.92 -1.428% numa05.sh Sys: 287.38 480.15 369.37 68.52 -7.964% numa05.sh User: 34732.12 38016.80 36255.85 1070.51 -1.704% Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-5-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
5f95ba7a43 |
sched/numa: Simplify load_too_imbalanced()
Currently load_too_imbalance() cares about the slope of imbalance. It doesn't care of the direction of the imbalance. However this may not work if nodes that are being compared have dissimilar capacities. Few nodes might have more cores than other nodes in the system. Also unlike traditional load balance at a NUMA sched domain, multiple requests to migrate from the same source node to same destination node may run in parallel. This can cause huge load imbalance. This is specially true on a larger machines with either large cores per node or more number of nodes in the system. Hence allow move/swap only if the imbalance is going to reduce. Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25058.2 25122.9 0.25 1 72950 73850 1.23 (numbers from v1 based on v4.17-rc5) Testcase Time: Min Max Avg StdDev numa01.sh Real: 516.14 892.41 739.84 151.32 numa01.sh Sys: 153.16 192.99 177.70 14.58 numa01.sh User: 39821.04 69528.92 57193.87 10989.48 numa02.sh Real: 60.91 62.35 61.58 0.63 numa02.sh Sys: 16.47 26.16 21.20 3.85 numa02.sh User: 5227.58 5309.61 5265.17 31.04 numa03.sh Real: 739.07 917.73 795.75 64.45 numa03.sh Sys: 94.46 136.08 109.48 14.58 numa03.sh User: 57478.56 72014.09 61764.48 5343.69 numa04.sh Real: 442.61 715.43 530.31 96.12 numa04.sh Sys: 224.90 348.63 285.61 48.83 numa04.sh User: 35836.84 47522.47 40235.41 3985.26 numa05.sh Real: 386.13 489.17 434.94 43.59 numa05.sh Sys: 144.29 438.56 278.80 105.78 numa05.sh User: 33255.86 36890.82 34879.31 1641.98 Testcase Time: Min Max Avg StdDev %Change numa01.sh Real: 435.78 653.81 534.58 83.20 38.39% numa01.sh Sys: 121.93 187.18 145.90 23.47 21.79% numa01.sh User: 37082.81 51402.80 43647.60 5409.75 31.03% numa02.sh Real: 60.64 61.63 61.19 0.40 0.637% numa02.sh Sys: 14.72 25.68 19.06 4.03 11.22% numa02.sh User: 5210.95 5266.69 5233.30 20.82 0.608% numa03.sh Real: 746.51 808.24 780.36 23.88 1.972% numa03.sh Sys: 97.26 108.48 105.07 4.28 4.197% numa03.sh User: 58956.30 61397.05 60162.95 1050.82 2.661% numa04.sh Real: 465.97 519.27 484.81 19.62 9.385% numa04.sh Sys: 304.43 359.08 334.68 20.64 -14.6% numa04.sh User: 37544.16 41186.15 39262.44 1314.91 2.478% numa05.sh Real: 411.57 457.20 433.29 16.58 0.380% numa05.sh Sys: 230.05 435.48 339.95 67.58 -17.9% numa05.sh User: 33325.54 36896.31 35637.84 1222.64 -2.12% Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Rik van Riel <riel@surriel.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-4-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Srikar Dronamraju
|
305c1fac32 |
sched/numa: Evaluate move once per node
task_numa_compare() helps choose the best CPU to move or swap the selected task. To achieve this task_numa_compare() is called for every CPU in the node. Currently it evaluates if the task can be moved/swapped for each of the CPUs. However the move evaluation is mostly independent of the CPU. Evaluating the move logic once per node, provides scope for simplifying task_numa_compare(). Running SPECjbb2005 on a 4 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 16 25705.2 25058.2 -2.51 1 74433 72950 -1.99 Running SPECjbb2005 on a 16 node machine and comparing bops/JVM JVMS LAST_PATCH WITH_PATCH %CHANGE 8 96589.6 105930 9.670 1 181830 178624 -1.76 (numbers from v1 based on v4.17-rc5) Testcase Time: Min Max Avg StdDev numa01.sh Real: 440.65 941.32 758.98 189.17 numa01.sh Sys: 183.48 320.07 258.42 50.09 numa01.sh User: 37384.65 71818.14 60302.51 13798.96 numa02.sh Real: 61.24 65.35 62.49 1.49 numa02.sh Sys: 16.83 24.18 21.40 2.60 numa02.sh User: 5219.59 5356.34 5264.03 49.07 numa03.sh Real: 822.04 912.40 873.55 37.35 numa03.sh Sys: 118.80 140.94 132.90 7.60 numa03.sh User: 62485.19 70025.01 67208.33 2967.10 numa04.sh Real: 690.66 872.12 778.49 65.44 numa04.sh Sys: 459.26 563.03 494.03 42.39 numa04.sh User: 51116.44 70527.20 58849.44 8461.28 numa05.sh Real: 418.37 562.28 525.77 54.27 numa05.sh Sys: 299.45 481.00 392.49 64.27 numa05.sh User: 34115.09 41324.02 39105.30 2627.68 Testcase Time: Min Max Avg StdDev %Change numa01.sh Real: 516.14 892.41 739.84 151.32 2.587% numa01.sh Sys: 153.16 192.99 177.70 14.58 45.42% numa01.sh User: 39821.04 69528.92 57193.87 10989.48 5.435% numa02.sh Real: 60.91 62.35 61.58 0.63 1.477% numa02.sh Sys: 16.47 26.16 21.20 3.85 0.943% numa02.sh User: 5227.58 5309.61 5265.17 31.04 -0.02% numa03.sh Real: 739.07 917.73 795.75 64.45 9.776% numa03.sh Sys: 94.46 136.08 109.48 14.58 21.39% numa03.sh User: 57478.56 72014.09 61764.48 5343.69 8.813% numa04.sh Real: 442.61 715.43 530.31 96.12 46.79% numa04.sh Sys: 224.90 348.63 285.61 48.83 72.97% numa04.sh User: 35836.84 47522.47 40235.41 3985.26 46.26% numa05.sh Real: 386.13 489.17 434.94 43.59 20.88% numa05.sh Sys: 144.29 438.56 278.80 105.78 40.77% numa05.sh User: 33255.86 36890.82 34879.31 1641.98 12.11% Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1529514181-9842-3-git-send-email-srikar@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Yun Wang
|
3d6c50c27b |
sched/debug: Show the sum wait time of a task group
Although we can rely on cpuacct to present the CPU usage of task groups, it is hard to tell how intense the competition is between these groups on CPU resources. Monitoring the wait time or sched_debug of each process could be very expensive, and there is no good way to accurately represent the conflict with these info, we need the wait time on group dimension. Thus we introduce group's wait_sum to represent the resource conflict between task groups, which is simply the sum of the wait time of the group's cfs_rq. The 'cpu.stat' is modified to show the statistic, like: nr_periods 0 nr_throttled 0 throttled_time 0 wait_sum 2035098795584 Now we can monitor the changes of wait_sum to tell how much a a task group is suffering in the fight of CPU resources. For example: (wait_sum - last_wait_sum) * 100 / (nr_cpu * period_ns) == X% means the task group paid X percentage of period on waiting for the CPU. Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/ff7dae3b-e5f9-7157-1caa-ff02c6b23dc1@linux.alibaba.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
2e62c4743a |
sched/fair: Remove #ifdefs from scale_rt_capacity()
Reuse cpu_util_irq() that has been defined for schedutil and set irq util to 0 when !CONFIG_IRQ_TIME_ACCOUNTING. But the compiler is not able to optimize the sequence (at least with aarch64 GCC 7.2.1): free *= (max - irq); free /= max; when irq is fixed to 0 Add a new inline function scale_irq_capacity() that will scale utilization when irq is accounted. Reuse this funciton in schedutil which applies similar formula. Suggested-by: Ingo Molnar <mingo@redhat.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: rjw@rjwysocki.net Link: http://lkml.kernel.org/r/1532001606-6689-1-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
4765096f4f |
Merge branch 'sched/urgent' into sched/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Hailong Liu
|
f3d133ee0a |
sched/rt: Restore rt_runtime after disabling RT_RUNTIME_SHARE
NO_RT_RUNTIME_SHARE feature is used to prevent a CPU borrow enough runtime with a spin-rt-task. However, if RT_RUNTIME_SHARE feature is enabled and rt_rq has borrowd enough rt_runtime at the beginning, rt_runtime can't be restored to its initial bandwidth rt_runtime after we disable RT_RUNTIME_SHARE. E.g. on my PC with 4 cores, procedure to reproduce: 1) Make sure RT_RUNTIME_SHARE is enabled cat /sys/kernel/debug/sched_features GENTLE_FAIR_SLEEPERS START_DEBIT NO_NEXT_BUDDY LAST_BUDDY CACHE_HOT_BUDDY WAKEUP_PREEMPTION NO_HRTICK NO_DOUBLE_TICK LB_BIAS NONTASK_CAPACITY TTWU_QUEUE NO_SIS_AVG_CPU SIS_PROP NO_WARN_DOUBLE_CLOCK RT_PUSH_IPI RT_RUNTIME_SHARE NO_LB_MIN ATTACH_AGE_LOAD WA_IDLE WA_WEIGHT WA_BIAS 2) Start a spin-rt-task ./loop_rr & 3) set affinity to the last cpu taskset -p 8 $pid_of_loop_rr 4) Observe that last cpu have borrowed enough runtime. cat /proc/sched_debug | grep rt_runtime .rt_runtime : 950.000000 .rt_runtime : 900.000000 .rt_runtime : 950.000000 .rt_runtime : 1000.000000 5) Disable RT_RUNTIME_SHARE echo NO_RT_RUNTIME_SHARE > /sys/kernel/debug/sched_features 6) Observe that rt_runtime can not been restored cat /proc/sched_debug | grep rt_runtime .rt_runtime : 950.000000 .rt_runtime : 900.000000 .rt_runtime : 950.000000 .rt_runtime : 1000.000000 This patch help to restore rt_runtime after we disable RT_RUNTIME_SHARE. Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn> Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: zhong.weidong@zte.com.cn Link: http://lkml.kernel.org/r/1531874815-39357-1-git-send-email-liu.hailong6@zte.com.cn Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Daniel Bristot de Oliveira
|
840d719604 |
sched/deadline: Update rq_clock of later_rq when pushing a task
Daniel Casini got this warn while running a DL task here at RetisLab:
[ 461.137582] ------------[ cut here ]------------
[ 461.137583] rq->clock_update_flags < RQCF_ACT_SKIP
[ 461.137599] WARNING: CPU: 4 PID: 2354 at kernel/sched/sched.h:967 assert_clock_updated.isra.32.part.33+0x17/0x20
[a ton of modules]
[ 461.137646] CPU: 4 PID: 2354 Comm: label_image Not tainted 4.18.0-rc4+ #3
[ 461.137647] Hardware name: ASUS All Series/Z87-K, BIOS 0801 09/02/2013
[ 461.137649] RIP: 0010:assert_clock_updated.isra.32.part.33+0x17/0x20
[ 461.137649] Code: ff 48 89 83 08 09 00 00 eb c6 66 0f 1f 84 00 00 00 00 00 55 48 c7 c7 98 7a 6c a5 c6 05 bc 0d 54 01 01 48 89 e5 e8 a9 84 fb ff <0f> 0b 5d c3 0f 1f 44 00 00 0f 1f 44 00 00 83 7e 60 01 74 0a 48 3b
[ 461.137673] RSP: 0018:ffffa77e08cafc68 EFLAGS: 00010082
[ 461.137674] RAX: 0000000000000000 RBX: ffff8b3fc1702d80 RCX: 0000000000000006
[ 461.137674] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff8b3fded164b0
[ 461.137675] RBP: ffffa77e08cafc68 R08: 0000000000000026 R09: 0000000000000339
[ 461.137676] R10: ffff8b3fd060d410 R11: 0000000000000026 R12: ffffffffa4e14e20
[ 461.137677] R13: ffff8b3fdec22940 R14: ffff8b3fc1702da0 R15: ffff8b3fdec22940
[ 461.137678] FS: 00007efe43ee5700(0000) GS:ffff8b3fded00000(0000) knlGS:0000000000000000
[ 461.137679] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 461.137680] CR2: 00007efe30000010 CR3: 0000000301744003 CR4: 00000000001606e0
[ 461.137680] Call Trace:
[ 461.137684] push_dl_task.part.46+0x3bc/0x460
[ 461.137686] task_woken_dl+0x60/0x80
[ 461.137689] ttwu_do_wakeup+0x4f/0x150
[ 461.137690] ttwu_do_activate+0x77/0x80
[ 461.137692] try_to_wake_up+0x1d6/0x4c0
[ 461.137693] wake_up_q+0x32/0x70
[ 461.137696] do_futex+0x7e7/0xb50
[ 461.137698] __x64_sys_futex+0x8b/0x180
[ 461.137701] do_syscall_64+0x5a/0x110
[ 461.137703] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 461.137705] RIP: 0033:0x7efe4918ca26
[ 461.137705] Code: 00 00 00 74 17 49 8b 48 20 44 8b 59 10 41 83 e3 30 41 83 fb 20 74 1e be 85 00 00 00 41 ba 01 00 00 00 41 b9 01 00 00 04 0f 05 <48> 3d 01 f0 ff ff 73 1f 31 c0 c3 be 8c 00 00 00 49 89 c8 4d 31 d2
[ 461.137738] RSP: 002b:00007efe43ee4928 EFLAGS: 00000283 ORIG_RAX: 00000000000000ca
[ 461.137739] RAX: ffffffffffffffda RBX: 0000000005094df0 RCX: 00007efe4918ca26
[ 461.137740] RDX: 0000000000000001 RSI: 0000000000000085 RDI: 0000000005094e24
[ 461.137741] RBP: 00007efe43ee49c0 R08: 0000000005094e20 R09: 0000000004000001
[ 461.137741] R10: 0000000000000001 R11: 0000000000000283 R12: 0000000000000000
[ 461.137742] R13: 0000000005094df8 R14: 0000000000000001 R15: 0000000000448a10
[ 461.137743] ---[ end trace 187df4cad2bf7649 ]---
This warning happened in the push_dl_task(), because
__add_running_bw()->cpufreq_update_util() is getting the rq_clock of
the later_rq before its update, which takes place at activate_task().
The fix then is to update the rq_clock before calling add_running_bw().
To avoid double rq_clock_update() call, we set ENQUEUE_NOCLOCK flag to
activate_task().
Reported-by: Daniel Casini <daniel.casini@santannapisa.it>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tommaso Cucinotta <tommaso.cucinotta@santannapisa.it>
Fixes:
|
||
|
Yi Wang
|
6cd0c583b0 |
sched/topology: Check variable group before dereferencing it
The 'group' variable in sched_domain_debug_one() is not checked when firstly used in cpumask_test_cpu(cpu, sched_group_span(group)), but it might be NULL (it is checked later in the following while loop) and may cause NULL pointer dereference. We need to check it before using to avoid NULL dereference. Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: zhong.weidong@zte.com.cn Link: http://lkml.kernel.org/r/1532319547-33335-1-git-send-email-wang.yi59@zte.com.cn Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Peter Zijlstra
|
9407f5a7ee |
sched/clock: Close a hole in sched_clock_init()
All data required for the 'unstable' sched_clock must be set-up _before_
enabling it -- setting sched_clock_running. This includes the
__gtod_offset but also a recent scd stamp.
Make the gtod-offset update also set the csd stamp -- it requires the
same two clock reads _anyway_. This doesn't hurt in the
sched_clock_tick_stable() case and ensures sched_clock_init() gets
everything set-up before use.
Also switch to unconditional IRQ-disable/enable because the static key
stuff already requires this is not ran with IRQs disabled.
Fixes:
|
||
|
Pavel Tatashin
|
46457ea464 |
sched/clock: Use static key for sched_clock_running
sched_clock_running may be read every time sched_clock_cpu() is called. Yet, this variable is updated only twice during boot, and never changes again, therefore it is better to make it a static key. Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-25-pasha.tatashin@oracle.com |
||
|
Pavel Tatashin
|
857baa87b6 |
sched/clock: Enable sched clock early
Allow sched_clock() to be used before schec_clock_init() is called. This provides a way to get early boot timestamps on machines with unstable clocks. Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: peterz@infradead.org Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-24-pasha.tatashin@oracle.com |
||
|
Pavel Tatashin
|
5d2a4e91a5 |
sched/clock: Move sched clock initialization and merge with generic clock
sched_clock_postinit() initializes a generic clock on systems where no other clock is provided. This function may be called only after timekeeping_init(). Rename sched_clock_postinit to generic_clock_inti() and call it from sched_clock_init(). Move the call for sched_clock_init() until after time_init(). Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: steven.sistare@oracle.com Cc: daniel.m.jordan@oracle.com Cc: linux@armlinux.org.uk Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: john.stultz@linaro.org Cc: sboyd@codeaurora.org Cc: hpa@zytor.com Cc: douly.fnst@cn.fujitsu.com Cc: prarit@redhat.com Cc: feng.tang@intel.com Cc: pmladek@suse.com Cc: gnomes@lxorguk.ukuu.org.uk Cc: linux-s390@vger.kernel.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180719205545.16512-23-pasha.tatashin@oracle.com |
||
|
Andrea Parri
|
7696f9910a |
sched/Documentation: Update wake_up() & co. memory-barrier guarantees
Both the implementation and the users' expectation [1] for the various wakeup primitives have evolved over time, but the documentation has not kept up with these changes: brings it into 2018. [1] http://lkml.kernel.org/r/20180424091510.GB4064@hirez.programming.kicks-ass.net Also applied feedback from Alan Stern. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Akira Yokosawa <akiyks@gmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Daniel Lustig <dlustig@nvidia.com> Cc: David Howells <dhowells@redhat.com> Cc: Jade Alglave <j.alglave@ucl.ac.uk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luc Maranget <luc.maranget@inria.fr> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arch@vger.kernel.org Cc: parri.andrea@gmail.com Link: http://lkml.kernel.org/r/20180716180605.16115-12-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Andrea Parri
|
3d85b27037 |
locking/spinlock, sched/core: Clarify requirements for smp_mb__after_spinlock()
There are 11 interpretations of the requirements described in the header comment for smp_mb__after_spinlock(): one for each LKMM maintainer, and one currently encoded in the Cat file. Stick to the latter (until a more satisfactory solution is available). This also reworks some snippets related to the barrier to illustrate the requirements and to link them to the idioms which are relied upon at its call sites. Suggested-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: akiyks@gmail.com Cc: dhowells@redhat.com Cc: j.alglave@ucl.ac.uk Cc: linux-arch@vger.kernel.org Cc: luc.maranget@inria.fr Cc: npiggin@gmail.com Cc: parri.andrea@gmail.com Cc: stern@rowland.harvard.edu Link: http://lkml.kernel.org/r/20180716180605.16115-11-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Andrea Parri
|
76e079fefc |
sched/core: Use smp_mb() in wake_woken_function()
wake_woken_function() synchronizes with wait_woken() as follows:
[wait_woken] [wake_woken_function]
entry->flags &= ~wq_flag_woken; condition = true;
smp_mb(); smp_wmb();
if (condition) wq_entry->flags |= wq_flag_woken;
break;
This commit replaces the above smp_wmb() with an smp_mb() in order to
guarantee that either wait_woken() sees the wait condition being true
or the store to wq_entry->flags in woken_wake_function() follows the
store in wait_woken() in the coherence order (so that the former can
eventually be observed by wait_woken()).
The commit also fixes a comment associated to set_current_state() in
wait_woken(): the comment pairs the barrier in set_current_state() to
the above smp_wmb(), while the actual pairing involves the barrier in
set_current_state() and the barrier executed by the try_to_wake_up()
in wake_woken_function().
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akiyks@gmail.com
Cc: boqun.feng@gmail.com
Cc: dhowells@redhat.com
Cc: j.alglave@ucl.ac.uk
Cc: linux-arch@vger.kernel.org
Cc: luc.maranget@inria.fr
Cc: npiggin@gmail.com
Cc: parri.andrea@gmail.com
Cc: stern@rowland.harvard.edu
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/20180716180605.16115-10-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
|
Sebastian Andrzej Siewior
|
af0fffd930 |
sched/core: Remove get_cpu() from sched_fork()
get_cpu() disables preemption for the entire sched_fork() function.
This get_cpu() was introduced in commit:
|
||
|
Peter Zijlstra
|
45f5519ec5 |
sched/cpufreq: Clarify sugov_get_util()
Add a few comments to (hopefully) clarifying some of the magic in sugov_get_util(). Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Link: http://lkml.kernel.org/r/20180705123617.GM2458@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
5fd778915a |
sched/sysctl: Remove unused sched_time_avg_ms sysctl
/proc/sys/kernel/sched_time_avg_ms entry is not used anywhere, remove it. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1530200714-4504-12-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
bbb62c0b02 |
sched/core: Remove the rt_avg code
rt_avg is not used anywhere anymore, so we can remove all related code. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1530200714-4504-11-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
523e979d31 |
sched/core: Use PELT for scale_rt_capacity()
The utilization of the CPU by RT, DL and IRQs are now tracked with PELT so we can use these metrics instead of rt_avg to evaluate the remaining capacity available for CFS class. scale_rt_capacity() behavior has been changed and now returns the remaining capacity available for CFS instead of a scaling factor because RT, DL and IRQ provide now absolute utilization value. The same formula as schedutil is used: IRQ util_avg + (1 - IRQ util_avg / max capacity ) * /Sum rq util_avg but the implementation is different because it doesn't return the same value and doesn't benefit of the same optimization. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1530200714-4504-10-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
dfa444dc2f |
sched/cpufreq: Remove sugov_aggregate_util()
There is no reason why sugov_get_util() and sugov_aggregate_util() were in fact separate functions. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> [ Rebased after adding irq tracking and fixed some compilation errors. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Link: http://lkml.kernel.org/r/1530200714-4504-9-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
9033ea1188 |
cpufreq/schedutil: Take time spent in interrupts into account
The time spent executing IRQ handlers can be significant but it is not reflected in the utilization of CPU when deciding to choose an OPP. Now that we have access to this metric, schedutil can take it into account when selecting the OPP for a CPU. RQS utilization don't see the time spend under interrupt context and report their value in the normal context time window. We need to compensate this when adding interrupt utilization The CPU utilization is: IRQ util_avg + (1 - IRQ util_avg / max capacity ) * /Sum rq util_avg A test with iperf on hikey (octo arm64) gives the following speedup: iperf -c server_address -r -t 5 w/o patch w/ patch Tx 276 Mbits/sec 304 Mbits/sec +10% Rx 299 Mbits/sec 328 Mbits/sec +9% 8 iterations stdev is lower than 1% Only WFI idle state is enabled (shallowest idle state). Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Link: http://lkml.kernel.org/r/1530200714-4504-8-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
91c27493e7 |
sched/irq: Add IRQ utilization tracking
interrupt and steal time are the only remaining activities tracked by rt_avg. Like for sched classes, we can use PELT to track their average utilization of the CPU. But unlike sched class, we don't track when entering/leaving interrupt; Instead, we take into account the time spent under interrupt context when we update rqs' clock (rq_clock_task). This also means that we have to decay the normal context time and account for interrupt time during the update. That's also important to note that because: rq_clock == rq_clock_task + interrupt time and rq_clock_task is used by a sched class to compute its utilization, the util_avg of a sched class only reflects the utilization of the time spent in normal context and not of the whole time of the CPU. The utilization of interrupt gives an more accurate level of utilization of CPU. The CPU utilization is: avg_irq + (1 - avg_irq / max capacity) * /Sum avg_rq Most of the time, avg_irq is small and neglictible so the use of the approximation CPU utilization = /Sum avg_rq was enough. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1530200714-4504-7-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
8cc90515a4 |
cpufreq/schedutil: Use DL utilization tracking
Now that we have both the DL class bandwidth requirement and the DL class utilization, we can detect when CPU is fully used so we should run at max. Otherwise, we keep using the DL bandwidth requirement to define the utilization of the CPU. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Link: http://lkml.kernel.org/r/1530200714-4504-6-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
3727e0e163 |
sched/dl: Add dl_rq utilization tracking
Similarly to what happens with RT tasks, CFS tasks can be preempted by DL tasks and the CFS's utilization might no longer describes the real utilization level. Current DL bandwidth reflects the requirements to meet deadline when tasks are enqueued but not the current utilization of the DL sched class. We track DL class utilization to estimate the system utilization. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1530200714-4504-5-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
3ae117c6cd |
cpufreq/schedutil: Use RT utilization tracking
Add both CFS and RT utilization when selecting an OPP for CFS tasks as RT can preempt and steal CFS's running time. RT util_avg is used to take into account the utilization of RT tasks on the CPU when selecting OPP. If a RT task migrate, the RT utilization will not migrate but will decay over time. On an overloaded CPU, CFS utilization reflects the remaining utilization avialable on CPU. When RT task migrates, the CFS utilization will increase when tasks will start to use the newly available capacity. At the same pace, RT utilization will decay and both variations will compensate each other to keep unchanged overall utilization and will prevent any OPP drop. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Link: http://lkml.kernel.org/r/1530200714-4504-4-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
371bf42732 |
sched/rt: Add rt_rq utilization tracking
schedutil governor relies on cfs_rq's util_avg to choose the OPP when CFS tasks are running. When the CPU is overloaded by CFS and RT tasks, CFS tasks are preempted by RT tasks and in this case util_avg reflects the remaining capacity but not what CFS want to use. In such case, schedutil can select a lower OPP whereas the CPU is overloaded. In order to have a more accurate view of the utilization of the CPU, we track the utilization of RT tasks. Only util_avg is correctly tracked but not load_avg and runnable_load_avg which are useless for rt_rq. rt_rq uses rq_clock_task and cfs_rq uses cfs_rq_clock_task but they are the same at the root group level, so the PELT windows of the util_sum are aligned. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1530200714-4504-3-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
c079629862 |
sched/pelt: Move PELT related code in a dedicated file
We want to track rt_rq's utilization as a part of the estimation of the whole rq's utilization. This is necessary because rt tasks can steal utilization to cfs tasks and make them lighter than they are. As we want to use the same load tracking mecanism for both and prevent useless dependency between cfs and rt code, PELT code is moved in a dedicated file. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1530200714-4504-2-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Quentin Perret
|
8fe5c5a937 |
sched/fair: Fix util_avg of new tasks for asymmetric systems
When a new task wakes-up for the first time, its initial utilization is set to half of the spare capacity of its CPU. The current implementation of post_init_entity_util_avg() uses SCHED_CAPACITY_SCALE directly as a capacity reference. As a result, on a big.LITTLE system, a new task waking up on an idle little CPU will be given ~512 of util_avg, even if the CPU's capacity is significantly less than that. Fix this by computing the spare capacity with arch_scale_cpu_capacity(). Signed-off-by: Quentin Perret <quentin.perret@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Vincent Guittot <vincent.guittot@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dietmar.eggemann@arm.com Cc: morten.rasmussen@arm.com Cc: patrick.bellasi@arm.com Link: http://lkml.kernel.org/r/20180612112215.25448-1-quentin.perret@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Juri Lelli
|
e117cb52bd |
sched/deadline: Fix switched_from_dl() warning
Mark noticed that syzkaller is able to reliably trigger the following warning: dl_rq->running_bw > dl_rq->this_bw WARNING: CPU: 1 PID: 153 at kernel/sched/deadline.c:124 switched_from_dl+0x454/0x608 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 153 Comm: syz-executor253 Not tainted 4.18.0-rc3+ #29 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x458 show_stack+0x20/0x30 dump_stack+0x180/0x250 panic+0x2dc/0x4ec __warn_printk+0x0/0x150 report_bug+0x228/0x2d8 bug_handler+0xa0/0x1a0 brk_handler+0x2f0/0x568 do_debug_exception+0x1bc/0x5d0 el1_dbg+0x18/0x78 switched_from_dl+0x454/0x608 __sched_setscheduler+0x8cc/0x2018 sys_sched_setattr+0x340/0x758 el0_svc_naked+0x30/0x34 syzkaller reproducer runs a bunch of threads that constantly switch between DEADLINE and NORMAL classes while interacting through futexes. The splat above is caused by the fact that if a DEADLINE task is setattr back to NORMAL while in non_contending state (blocked on a futex - inactive timer armed), its contribution to running_bw is not removed before sub_rq_bw() gets called (!task_on_rq_queued() branch) and the latter sees running_bw > this_bw. Fix it by removing a task contribution from running_bw if the task is not queued and in non_contending state while switched to a different class. Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Reviewed-by: Luca Abeni <luca.abeni@santannapisa.it> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: claudio@evidence.eu.com Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/20180711072948.27061-1-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
4520843dfa |
Merge branch 'sched/urgent' into sched/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Peter Zijlstra
|
1cef1150ef |
kthread, sched/core: Fix kthread_parkme() (again...)
Gaurav reports that commit: |
||
|
Vincent Guittot
|
3482d98bbc |
sched/util_est: Fix util_est_dequeue() for throttled cfs_rq
When a cfs_rq is throttled, parent cfs_rq->nr_running is decreased and
everything happens at cfs_rq level. Currently util_est stays unchanged
in such case and it keeps accounting the utilization of throttled tasks.
This can somewhat make sense as we don't dequeue tasks but only throttled
cfs_rq.
If a task of another group is enqueued/dequeued and root cfs_rq becomes
idle during the dequeue, util_est will be cleared whereas it was
accounting util_est of throttled tasks before. So the behavior of util_est
is not always the same regarding throttled tasks and depends of side
activity. Furthermore, util_est will not be updated when the cfs_rq is
unthrottled as everything happens at cfs_rq level. Main results is that
util_est will stay null whereas we now have running tasks. We have to wait
for the next dequeue/enqueue of the previously throttled tasks to get an
up to date util_est.
Remove the assumption that cfs_rq's estimated utilization of a CPU is 0
if there is no running task so the util_est of a task remains until the
latter is dequeued even if its cfs_rq has been throttled.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
|
||
|
Xunlei Pang
|
f1d1be8aee |
sched/fair: Advance global expiration when period timer is restarted
When period gets restarted after some idle time, start_cfs_bandwidth() doesn't update the expiration information, expire_cfs_rq_runtime() will see cfs_rq->runtime_expires smaller than rq clock and go to the clock drift logic, wasting needless CPU cycles on the scheduler hot path. Update the global expiration in start_cfs_bandwidth() to avoid frequent expire_cfs_rq_runtime() calls once a new period begins. Signed-off-by: Xunlei Pang <xlpang@linux.alibaba.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ben Segall <bsegall@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180620101834.24455-2-xlpang@linux.alibaba.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Xunlei Pang
|
512ac999d2 |
sched/fair: Fix bandwidth timer clock drift condition
I noticed that cgroup task groups constantly get throttled even
if they have low CPU usage, this causes some jitters on the response
time to some of our business containers when enabling CPU quotas.
It's very simple to reproduce:
mkdir /sys/fs/cgroup/cpu/test
cd /sys/fs/cgroup/cpu/test
echo 100000 > cpu.cfs_quota_us
echo $$ > tasks
then repeat:
cat cpu.stat | grep nr_throttled # nr_throttled will increase steadily
After some analysis, we found that cfs_rq::runtime_remaining will
be cleared by expire_cfs_rq_runtime() due to two equal but stale
"cfs_{b|q}->runtime_expires" after period timer is re-armed.
The current condition to judge clock drift in expire_cfs_rq_runtime()
is wrong, the two runtime_expires are actually the same when clock
drift happens, so this condtion can never hit. The orginal design was
correctly done by this commit:
|
||
|
Vincent Guittot
|
296b2ffe7f |
sched/rt: Fix call to cpufreq_update_util()
With commit: |
||
|
Frederic Weisbecker
|
d9c0ffcabd |
sched/nohz: Skip remote tick on idle task entirely
Some people have reported that the warning in sched_tick_remote() occasionally triggers, especially in favour of some RCU-Torture pressure: WARNING: CPU: 11 PID: 906 at kernel/sched/core.c:3138 sched_tick_remote+0xb6/0xc0 Modules linked in: CPU: 11 PID: 906 Comm: kworker/u32:3 Not tainted 4.18.0-rc2+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Workqueue: events_unbound sched_tick_remote RIP: 0010:sched_tick_remote+0xb6/0xc0 Code: e8 0f 06 b8 00 c6 03 00 fb eb 9d 8b 43 04 85 c0 75 8d 48 8b 83 e0 0a 00 00 48 85 c0 75 81 eb 88 48 89 df e8 bc fe ff ff eb aa <0f> 0b eb +c5 66 0f 1f 44 00 00 bf 17 00 00 00 e8 b6 2e fe ff 0f b6 Call Trace: process_one_work+0x1df/0x3b0 worker_thread+0x44/0x3d0 kthread+0xf3/0x130 ? set_worker_desc+0xb0/0xb0 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x35/0x40 This happens when the remote tick applies on an idle task. Usually the idle_cpu() check avoids that, but it is performed before we lock the runqueue and it is therefore racy. It was intended to be that way in order to prevent from useless runqueue locks since idle task tick callback is a no-op. Now if the racy check slips out of our hands and we end up remotely ticking an idle task, the empty task_tick_idle() is harmless. Still it won't pass the WARN_ON_ONCE() test that ensures rq_clock_task() is not too far from curr->se.exec_start because update_curr_idle() doesn't update the exec_start value like other scheduler policies. Hence the reported false positive. So let's have another check, while the rq is locked, to make sure we don't remote tick on an idle task. The lockless idle_cpu() still applies to avoid unecessary rq lock contention. Reported-by: Jacek Tomaka <jacekt@dug.com> Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reported-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1530203381-31234-1-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Li RongQing
|
03585a95cd |
sched/fair: Remove stale tg_unthrottle_up() comments
After commit:
|
||
|
Yisheng Xie
|
8f894bf47d |
sched/debug: Use match_string() helper instead of open-coded logic
match_string() returns the index of an array for a matching string, which can be used instead of the open coded variant. Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/lkml/1527765086-19873-15-git-send-email-xieyisheng1@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Peter Zijlstra
|
ba2591a599 |
sched/smt: Update sched_smt_present at runtime
The static key sched_smt_present is only updated at boot time when SMT siblings have been detected. Booting with maxcpus=1 and bringing the siblings online after boot rebuilds the scheduling domains correctly but does not update the static key, so the SMT code is not enabled. Let the key be updated in the scheduler CPU hotplug code to fix this. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org> |
||
|
Peter Zijlstra
|
b3dae109fa |
sched/swait: Rename to exclusive
Since swait basically implemented exclusive waits only, make sure
the API reflects that.
$ git grep -l -e "\<swake_up\>"
-e "\<swait_event[^ (]*"
-e "\<prepare_to_swait\>" | while read file;
do
sed -i -e 's/\<swake_up\>/&_one/g'
-e 's/\<swait_event[^ (]*/&_exclusive/g'
-e 's/\<prepare_to_swait\>/&_exclusive/g' $file;
done
With a few manual touch-ups.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: bigeasy@linutronix.de
Cc: oleg@redhat.com
Cc: paulmck@linux.vnet.ibm.com
Cc: pbonzini@redhat.com
Link: https://lkml.kernel.org/r/20180612083909.261946548@infradead.org
|
||
|
Peter Zijlstra
|
0abf17bc77 |
sched/swait: Switch to full exclusive mode
Linus noted that swait basically implements exclusive mode -- because swake_up() only wakes a single waiter. And because of that it should take care to properly deal with the interruptible case. In short, the problem is that swake_up() can race with a signal. In this this case it is possible the swake_up() 'wakes' the waiter that is already on the way out because it just got a signal and the wakeup gets lost. The normal wait code is very careful and avoids this situation, make sure we do too. Copy the exact exclusive semantics from wait. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: bigeasy@linutronix.de Cc: oleg@redhat.com Cc: paulmck@linux.vnet.ibm.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180612083909.209762413@infradead.org |
||
|
Peter Zijlstra
|
6519750210 |
sched/swait: Remove __prepare_to_swait
There is no public user of this API, remove it. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: bigeasy@linutronix.de Cc: oleg@redhat.com Cc: paulmck@linux.vnet.ibm.com Cc: pbonzini@redhat.com Link: https://lkml.kernel.org/r/20180612083909.157076812@infradead.org |
||
|
Mark Rutland
|
0ed557aa81 |
sched/core / kcov: avoid kcov_area during task switch
During a context switch, we first switch_mm() to the next task's mm,
then switch_to() that new task. This means that vmalloc'd regions which
had previously been faulted in can transiently disappear in the context
of the prev task.
Functions instrumented by KCOV may try to access a vmalloc'd kcov_area
during this window, and as the fault handling code is instrumented, this
results in a recursive fault.
We must avoid accessing any kcov_area during this window. We can do so
with a new flag in kcov_mode, set prior to switching the mm, and cleared
once the new task is live. Since task_struct::kcov_mode isn't always a
specific enum kcov_mode value, this is made an unsigned int.
The manipulation is hidden behind kcov_{prepare,finish}_switch() helpers,
which are empty for !CONFIG_KCOV kernels.
The code uses macros because I can't use static inline functions without a
circular include dependency between <linux/sched.h> and <linux/kcov.h>,
since the definition of task_struct uses things defined in <linux/kcov.h>
Link: http://lkml.kernel.org/r/20180504135535.53744-4-mark.rutland@arm.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Kees Cook
|
6396bb2215 |
treewide: kzalloc() -> kcalloc()
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:
kzalloc(a * b, gfp)
with:
kcalloc(a * b, gfp)
as well as handling cases of:
kzalloc(a * b * c, gfp)
with:
kzalloc(array3_size(a, b, c), gfp)
as it's slightly less ugly than:
kzalloc_array(array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
kzalloc(4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@
(
kzalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kzalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@
(
kzalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kzalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kzalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@
- kzalloc
+ kcalloc
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
kzalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kzalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
kzalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kzalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@
(
kzalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kzalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kzalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
kzalloc(sizeof(THING) * C2, ...)
|
kzalloc(sizeof(TYPE) * C2, ...)
|
kzalloc(C1 * C2 * C3, ...)
|
kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * E2
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kzalloc
+ kcalloc
(
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
||
|
Kees Cook
|
6da2ec5605 |
treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:
kmalloc(a * b, gfp)
with:
kmalloc_array(a * b, gfp)
as well as handling cases of:
kmalloc(a * b * c, gfp)
with:
kmalloc(array3_size(a, b, c), gfp)
as it's slightly less ugly than:
kmalloc_array(array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
kmalloc(4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@
(
kmalloc(
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
kmalloc(
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@
(
kmalloc(
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
kmalloc(
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(char) * COUNT
+ COUNT
, ...)
|
kmalloc(
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@
- kmalloc
+ kmalloc_array
(
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
kmalloc(
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
kmalloc(
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
kmalloc(
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
kmalloc(
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
kmalloc(
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
kmalloc(
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@
(
kmalloc(
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
kmalloc(
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
kmalloc(C1 * C2 * C3, ...)
|
kmalloc(
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
kmalloc(
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
kmalloc(sizeof(THING) * C2, ...)
|
kmalloc(sizeof(TYPE) * C2, ...)
|
kmalloc(C1 * C2 * C3, ...)
|
kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- kmalloc
+ kmalloc_array
(
- (E1) * E2
+ E1, E2
, ...)
|
- kmalloc
+ kmalloc_array
(
- (E1) * (E2)
+ E1, E2
, ...)
|
- kmalloc
+ kmalloc_array
(
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
||
|
Linus Torvalds
|
d82991a868 |
Merge branch 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull restartable sequence support from Thomas Gleixner: "The restartable sequences syscall (finally): After a lot of back and forth discussion and massive delays caused by the speculative distraction of maintainers, the core set of restartable sequences has finally reached a consensus. It comes with the basic non disputed core implementation along with support for arm, powerpc and x86 and a full set of selftests It was exposed to linux-next earlier this week, so it does not fully comply with the merge window requirements, but there is really no point to drag it out for yet another cycle" * 'core-rseq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq/selftests: Provide Makefile, scripts, gitignore rseq/selftests: Provide parametrized tests rseq/selftests: Provide basic percpu ops test rseq/selftests: Provide basic test rseq/selftests: Provide rseq library selftests/lib.mk: Introduce OVERRIDE_TARGETS powerpc: Wire up restartable sequences system call powerpc: Add syscall detection for restartable sequences powerpc: Add support for restartable sequences x86: Wire up restartable sequence system call x86: Add support for restartable sequences arm: Wire up restartable sequences system call arm: Add syscall detection for restartable sequences arm: Add restartable sequences support rseq: Introduce restartable sequences system call uapi/headers: Provide types_32_64.h |
||
|
Mathieu Desnoyers
|
d7822b1e24 |
rseq: Introduce restartable sequences system call
Expose a new system call allowing each thread to register one userspace memory area to be used as an ABI between kernel and user-space for two purposes: user-space restartable sequences and quick access to read the current CPU number value from user-space. * Restartable sequences (per-cpu atomics) Restartables sequences allow user-space to perform update operations on per-cpu data without requiring heavy-weight atomic operations. The restartable critical sections (percpu atomics) work has been started by Paul Turner and Andrew Hunter. It lets the kernel handle restart of critical sections. [1] [2] The re-implementation proposed here brings a few simplifications to the ABI which facilitates porting to other architectures and speeds up the user-space fast path. Here are benchmarks of various rseq use-cases. Test hardware: arm32: ARMv7 Processor rev 4 (v7l) "Cubietruck", 2-core x86-64: Intel E5-2630 v3@2.40GHz, 16-core, hyperthreading The following benchmarks were all performed on a single thread. * Per-CPU statistic counter increment getcpu+atomic (ns/op) rseq (ns/op) speedup arm32: 344.0 31.4 11.0 x86-64: 15.3 2.0 7.7 * LTTng-UST: write event 32-bit header, 32-bit payload into tracer per-cpu buffer getcpu+atomic (ns/op) rseq (ns/op) speedup arm32: 2502.0 2250.0 1.1 x86-64: 117.4 98.0 1.2 * liburcu percpu: lock-unlock pair, dereference, read/compare word getcpu+atomic (ns/op) rseq (ns/op) speedup arm32: 751.0 128.5 5.8 x86-64: 53.4 28.6 1.9 * jemalloc memory allocator adapted to use rseq Using rseq with per-cpu memory pools in jemalloc at Facebook (based on rseq 2016 implementation): The production workload response-time has 1-2% gain avg. latency, and the P99 overall latency drops by 2-3%. * Reading the current CPU number Speeding up reading the current CPU number on which the caller thread is running is done by keeping the current CPU number up do date within the cpu_id field of the memory area registered by the thread. This is done by making scheduler preemption set the TIF_NOTIFY_RESUME flag on the current thread. Upon return to user-space, a notify-resume handler updates the current CPU value within the registered user-space memory area. User-space can then read the current CPU number directly from memory. Keeping the current cpu id in a memory area shared between kernel and user-space is an improvement over current mechanisms available to read the current CPU number, which has the following benefits over alternative approaches: - 35x speedup on ARM vs system call through glibc - 20x speedup on x86 compared to calling glibc, which calls vdso executing a "lsl" instruction, - 14x speedup on x86 compared to inlined "lsl" instruction, - Unlike vdso approaches, this cpu_id value can be read from an inline assembly, which makes it a useful building block for restartable sequences. - The approach of reading the cpu id through memory mapping shared between kernel and user-space is portable (e.g. ARM), which is not the case for the lsl-based x86 vdso. On x86, yet another possible approach would be to use the gs segment selector to point to user-space per-cpu data. This approach performs similarly to the cpu id cache, but it has two disadvantages: it is not portable, and it is incompatible with existing applications already using the gs segment selector for other purposes. Benchmarking various approaches for reading the current CPU number: ARMv7 Processor rev 4 (v7l) Machine model: Cubietruck - Baseline (empty loop): 8.4 ns - Read CPU from rseq cpu_id: 16.7 ns - Read CPU from rseq cpu_id (lazy register): 19.8 ns - glibc 2.19-0ubuntu6.6 getcpu: 301.8 ns - getcpu system call: 234.9 ns x86-64 Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz: - Baseline (empty loop): 0.8 ns - Read CPU from rseq cpu_id: 0.8 ns - Read CPU from rseq cpu_id (lazy register): 0.8 ns - Read using gs segment selector: 0.8 ns - "lsl" inline assembly: 13.0 ns - glibc 2.19-0ubuntu6 getcpu: 16.6 ns - getcpu system call: 53.9 ns - Speed (benchmark taken on v8 of patchset) Running 10 runs of hackbench -l 100000 seems to indicate, contrary to expectations, that enabling CONFIG_RSEQ slightly accelerates the scheduler: Configuration: 2 sockets * 8-core Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz (directly on hardware, hyperthreading disabled in BIOS, energy saving disabled in BIOS, turboboost disabled in BIOS, cpuidle.off=1 kernel parameter), with a Linux v4.6 defconfig+localyesconfig, restartable sequences series applied. * CONFIG_RSEQ=n avg.: 41.37 s std.dev.: 0.36 s * CONFIG_RSEQ=y avg.: 40.46 s std.dev.: 0.33 s - Size On x86-64, between CONFIG_RSEQ=n/y, the text size increase of vmlinux is 567 bytes, and the data size increase of vmlinux is 5696 bytes. [1] https://lwn.net/Articles/650333/ [2] http://www.linuxplumbersconf.org/2013/ocw/system/presentations/1695/original/LPC%20-%20PerCpu%20Atomics.pdf Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Joel Fernandes <joelaf@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Watson <davejwatson@fb.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Chris Lameter <cl@linux.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Hunter <ahh@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Paul Turner <pjt@google.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ben Maurer <bmaurer@fb.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: linux-api@vger.kernel.org Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20151027235635.16059.11630.stgit@pjt-glaptop.roam.corp.google.com Link: http://lkml.kernel.org/r/20150624222609.6116.86035.stgit@kitami.mtv.corp.google.com Link: https://lkml.kernel.org/r/20180602124408.8430-3-mathieu.desnoyers@efficios.com |
||
|
Linus Torvalds
|
3c89adb0d1 |
Power management updates for 4.18-rc1
These include a significant update of the generic power domains (genpd)
and Operating Performance Points (OPP) frameworks, mostly related to
the introduction of power domain performance levels, cpufreq updates
(new driver for Qualcomm Kryo processors, updates of the existing
drivers, some core fixes, schedutil governor improvements), PCI power
management fixes, ACPI workaround for EC-based wakeup events handling
on resume from suspend-to-idle, and major updates of the turbostat
and pm-graph utilities.
Specifics:
- Introduce power domain performance levels into the the generic
power domains (genpd) and Operating Performance Points (OPP)
frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter).
- Fix two issues in the runtime PM framework related to the
initialization and removal of devices using device links (Ulf
Hansson).
- Clean up the initialization of drivers for devices in PM domains
(Ulf Hansson, Geert Uytterhoeven).
- Fix a cpufreq core issue related to the policy sysfs interface
causing CPU online to fail for CPUs sharing one cpufreq policy in
some situations (Tao Wang).
- Make it possible to use platform-specific suspend/resume hooks
in the cpufreq-dt driver and make the Armada 37xx DVFS use that
feature (Viresh Kumar, Miquel Raynal).
- Optimize policy transition notifications in cpufreq (Viresh Kumar).
- Improve the iowait boost mechanism in the schedutil cpufreq
governor (Patrick Bellasi).
- Improve the handling of deferred frequency updates in the
schedutil cpufreq governor (Joel Fernandes, Dietmar Eggemann,
Rafael Wysocki, Viresh Kumar).
- Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin).
- Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry
Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman,
Viresh Kumar).
- Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag
set and update stale comments in the PCI core PM code (Rafael
Wysocki).
- Work around an issue related to the handling of EC-based wakeup
events in the ACPI PM core during resume from suspend-to-idle if
the EC has been put into the low-power mode (Rafael Wysocki).
- Improve the handling of wakeup source objects in the PM core (Doug
Berger, Mahendran Ganesh, Rafael Wysocki).
- Update the driver core to prevent deferred probe from breaking
suspend/resume ordering (Feng Kan).
- Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael
Wysocki).
- Make the core suspend/resume code and cpufreq support the RT patch
(Sebastian Andrzej Siewior, Thomas Gleixner).
- Consolidate the PM QoS handling in cpuidle governors (Rafael
Wysocki).
- Fix a possible crash in the hibernation core (Tetsuo Handa).
- Update the rockchip-io Adaptive Voltage Scaling (AVS) driver
(David Wu).
- Update the turbostat utility (fixes, cleanups, new CPU IDs, new
command line options, built-in "Low Power Idle" counters support,
new POLL and POLL% columns) and add an entry for it to MAINTAINERS
(Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner,
Prarit Bhargava, Srinivas Pandruvada).
- Update the pm-graph to version 5.1 (Todd Brandt).
- Update the intel_pstate_tracer utility (Doug Smythies).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=wqBV
-----END PGP SIGNATURE-----
Merge tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These include a significant update of the generic power domains
(genpd) and Operating Performance Points (OPP) frameworks, mostly
related to the introduction of power domain performance levels,
cpufreq updates (new driver for Qualcomm Kryo processors, updates of
the existing drivers, some core fixes, schedutil governor
improvements), PCI power management fixes, ACPI workaround for
EC-based wakeup events handling on resume from suspend-to-idle, and
major updates of the turbostat and pm-graph utilities.
Specifics:
- Introduce power domain performance levels into the the generic
power domains (genpd) and Operating Performance Points (OPP)
frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter).
- Fix two issues in the runtime PM framework related to the
initialization and removal of devices using device links (Ulf
Hansson).
- Clean up the initialization of drivers for devices in PM domains
(Ulf Hansson, Geert Uytterhoeven).
- Fix a cpufreq core issue related to the policy sysfs interface
causing CPU online to fail for CPUs sharing one cpufreq policy in
some situations (Tao Wang).
- Make it possible to use platform-specific suspend/resume hooks in
the cpufreq-dt driver and make the Armada 37xx DVFS use that
feature (Viresh Kumar, Miquel Raynal).
- Optimize policy transition notifications in cpufreq (Viresh Kumar).
- Improve the iowait boost mechanism in the schedutil cpufreq
governor (Patrick Bellasi).
- Improve the handling of deferred frequency updates in the schedutil
cpufreq governor (Joel Fernandes, Dietmar Eggemann, Rafael Wysocki,
Viresh Kumar).
- Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin).
- Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry
Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman, Viresh
Kumar).
- Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag set
and update stale comments in the PCI core PM code (Rafael Wysocki).
- Work around an issue related to the handling of EC-based wakeup
events in the ACPI PM core during resume from suspend-to-idle if
the EC has been put into the low-power mode (Rafael Wysocki).
- Improve the handling of wakeup source objects in the PM core (Doug
Berger, Mahendran Ganesh, Rafael Wysocki).
- Update the driver core to prevent deferred probe from breaking
suspend/resume ordering (Feng Kan).
- Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael
Wysocki).
- Make the core suspend/resume code and cpufreq support the RT patch
(Sebastian Andrzej Siewior, Thomas Gleixner).
- Consolidate the PM QoS handling in cpuidle governors (Rafael
Wysocki).
- Fix a possible crash in the hibernation core (Tetsuo Handa).
- Update the rockchip-io Adaptive Voltage Scaling (AVS) driver (David
Wu).
- Update the turbostat utility (fixes, cleanups, new CPU IDs, new
command line options, built-in "Low Power Idle" counters support,
new POLL and POLL% columns) and add an entry for it to MAINTAINERS
(Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner,
Prarit Bhargava, Srinivas Pandruvada).
- Update the pm-graph to version 5.1 (Todd Brandt).
- Update the intel_pstate_tracer utility (Doug Smythies)"
* tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (128 commits)
tools/power turbostat: update version number
tools/power turbostat: Add Node in output
tools/power turbostat: add node information into turbostat calculations
tools/power turbostat: remove num_ from cpu_topology struct
tools/power turbostat: rename num_cores_per_pkg to num_cores_per_node
tools/power turbostat: track thread ID in cpu_topology
tools/power turbostat: Calculate additional node information for a package
tools/power turbostat: Fix node and siblings lookup data
tools/power turbostat: set max_num_cpus equal to the cpumask length
tools/power turbostat: if --num_iterations, print for specific number of iterations
tools/power turbostat: Add Cannon Lake support
tools/power turbostat: delete duplicate #defines
x86: msr-index.h: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE defines
tools/power turbostat: add POLL and POLL% column
tools/power turbostat: Fix --hide Pk%pc10
tools/power turbostat: Build-in "Low Power Idle" counters support
tools/power turbostat: Don't make man pages executable
tools/power turbostat: remove blank lines
tools/power turbostat: a small C-states dump readability immprovement
...
|
||
|
Linus Torvalds
|
f7f4e7fc6c |
Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar: - power-aware scheduling improvements (Patrick Bellasi) - NUMA balancing improvements (Mel Gorman) - vCPU scheduling fixes (Rohit Jain) * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Update util_est before updating schedutil sched/cpufreq: Modify aggregate utilization to always include blocked FAIR utilization sched/deadline/Documentation: Add overrun signal and GRUB-PA documentation sched/core: Distinguish between idle_cpu() calls based on desired effect, introduce available_idle_cpu() sched/wait: Include <linux/wait.h> in <linux/swait.h> sched/numa: Stagger NUMA balancing scan periods for new threads sched/core: Don't schedule threads on pre-empted vCPUs sched/fair: Avoid calling sync_entity_load_avg() unnecessarily sched/fair: Rearrange select_task_rq_fair() to optimize it |
||
|
Linus Torvalds
|
4057adafb3 |
Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
- updates to the handling of expedited grace periods
- updates to reduce lock contention in the rcu_node combining tree
[ These are in preparation for the consolidation of RCU-bh,
RCU-preempt, and RCU-sched into a single flavor, which was
requested by Linus in response to a security flaw whose root cause
included confusion between the multiple flavors of RCU ]
- torture-test updates that save their users some time and effort
- miscellaneous fixes
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
rcu/x86: Provide early rcu_cpu_starting() callback
torture: Make kvm-find-errors.sh find build warnings
rcutorture: Abbreviate kvm.sh summary lines
rcutorture: Print end-of-test state in kvm.sh summary
rcutorture: Print end-of-test state
torture: Fold parse-torture.sh into parse-console.sh
torture: Add a script to edit output from failed runs
rcu: Update list of rcu_future_grace_period() trace events
rcu: Drop early GP request check from rcu_gp_kthread()
rcu: Simplify and inline cpu_needs_another_gp()
rcu: The rcu_gp_cleanup() function does not need cpu_needs_another_gp()
rcu: Make rcu_start_this_gp() check for out-of-range requests
rcu: Add funnel locking to rcu_start_this_gp()
rcu: Make rcu_start_future_gp() caller select grace period
rcu: Inline rcu_start_gp_advanced() into rcu_start_future_gp()
rcu: Clear request other than RCU_GP_FLAG_INIT at GP end
rcu: Cleanup, don't put ->completed into an int
rcu: Switch __rcu_process_callbacks() to rcu_accelerate_cbs()
rcu: Avoid __call_rcu_core() root rcu_node ->lock acquisition
rcu: Make rcu_migrate_callbacks wake GP kthread when needed
...
|
||
|
Linus Torvalds
|
cf626b0da7 |
Merge branch 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull procfs updates from Al Viro:
"Christoph's proc_create_... cleanups series"
* 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits)
xfs, proc: hide unused xfs procfs helpers
isdn/gigaset: add back gigaset_procinfo assignment
proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields
tty: replace ->proc_fops with ->proc_show
ide: replace ->proc_fops with ->proc_show
ide: remove ide_driver_proc_write
isdn: replace ->proc_fops with ->proc_show
atm: switch to proc_create_seq_private
atm: simplify procfs code
bluetooth: switch to proc_create_seq_data
netfilter/x_tables: switch to proc_create_seq_private
netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data
neigh: switch to proc_create_seq_data
hostap: switch to proc_create_{seq,single}_data
bonding: switch to proc_create_seq_data
rtc/proc: switch to proc_create_single_data
drbd: switch to proc_create_single
resource: switch to proc_create_seq_data
staging/rtl8192u: simplify procfs code
jfs: simplify procfs code
...
|
||
|
Rafael J. Wysocki
|
601ef1f3c0 |
Merge branches 'pm-cpufreq-sched' and 'pm-cpuidle'
* pm-cpufreq-sched: cpufreq: schedutil: Avoid missing updates for one-CPU policies schedutil: Allow cpufreq requests to be made even when kthread kicked cpufreq: Rename cpufreq_can_do_remote_dvfs() cpufreq: schedutil: Cleanup and document iowait boost cpufreq: schedutil: Fix iowait boost reset cpufreq: schedutil: Don't set next_freq to UINT_MAX Revert "cpufreq: schedutil: Don't restrict kthread to related_cpus unnecessarily" * pm-cpuidle: cpuidle: governors: Consolidate PM QoS handling cpuidle: governors: Drop redundant checks related to PM QoS |
||
|
Davidlohr Bueso
|
595058b667 |
sched/headers: Fix typo
I cannot spell 'throttling'. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180530224940.17839-1-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Juri Lelli
|
ecda2b66e2 |
sched/deadline: Fix missing clock update
A missing clock update is causing the following warning: rq->clock_update_flags < RQCF_ACT_SKIP WARNING: CPU: 10 PID: 0 at kernel/sched/sched.h:963 inactive_task_timer+0x5d6/0x720 Call Trace: <IRQ> __hrtimer_run_queues+0x10f/0x530 hrtimer_interrupt+0xe5/0x240 smp_apic_timer_interrupt+0x79/0x2b0 apic_timer_interrupt+0xf/0x20 </IRQ> do_idle+0x203/0x280 cpu_startup_entry+0x6f/0x80 start_secondary+0x1b0/0x200 secondary_startup_64+0xa5/0xb0 hardirqs last enabled at (793919): [<ffffffffa27c5f6e>] cpuidle_enter_state+0x9e/0x360 hardirqs last disabled at (793920): [<ffffffffa2a0096e>] interrupt_entry+0xce/0xe0 softirqs last enabled at (793922): [<ffffffffa20bef78>] irq_enter+0x68/0x70 softirqs last disabled at (793921): [<ffffffffa20bef5d>] irq_enter+0x4d/0x70 This happens because inactive_task_timer() calls sub_running_bw() (if TASK_DEAD and non_contending) that might trigger a schedutil update, which might access the clock. Clock is however currently updated only later in inactive_task_timer() function. Fix the problem by updating the clock right after task_rq_lock(). Reported-by: kernel test robot <xiaolong.ye@intel.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Claudio Scordino <claudio@evidence.eu.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luca Abeni <luca.abeni@santannapisa.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180530160809.9074-1-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Paul Burton
|
7af443ee16 |
sched/core: Require cpu_active() in select_task_rq(), for user tasks
select_task_rq() is used in a few paths to select the CPU upon which a
thread should be run - for example it is used by try_to_wake_up() & by
fork or exec balancing. As-is it allows use of any online CPU that is
present in the task's cpus_allowed mask.
This presents a problem because there is a period whilst CPUs are
brought online where a CPU is marked online, but is not yet fully
initialized - ie. the period where CPUHP_AP_ONLINE_IDLE <= state <
CPUHP_ONLINE. Usually we don't run any user tasks during this window,
but there are corner cases where this can happen. An example observed
is:
- Some user task A, running on CPU X, forks to create task B.
- sched_fork() calls __set_task_cpu() with cpu=X, setting task B's
task_struct::cpu field to X.
- CPU X is offlined.
- Task A, currently somewhere between the __set_task_cpu() in
copy_process() and the call to wake_up_new_task(), is migrated to
CPU Y by migrate_tasks() when CPU X is offlined.
- CPU X is onlined, but still in the CPUHP_AP_ONLINE_IDLE state. The
scheduler is now active on CPU X, but there are no user tasks on
the runqueue.
- Task A runs on CPU Y & reaches wake_up_new_task(). This calls
select_task_rq() with cpu=X, taken from task B's task_struct,
and select_task_rq() allows CPU X to be returned.
- Task A enqueues task B on CPU X's runqueue, via activate_task() &
enqueue_task().
- CPU X now has a user task on its runqueue before it has reached the
CPUHP_ONLINE state.
In most cases, the user tasks that schedule on the newly onlined CPU
have no idea that anything went wrong, but one case observed to be
problematic is if the task goes on to invoke the sched_setaffinity
syscall. The newly onlined CPU reaches the CPUHP_AP_ONLINE_IDLE state
before the CPU that brought it online calls stop_machine_unpark(). This
means that for a portion of the window of time between
CPUHP_AP_ONLINE_IDLE & CPUHP_ONLINE the newly onlined CPU's struct
cpu_stopper has its enabled field set to false. If a user thread is
executed on the CPU during this window and it invokes sched_setaffinity
with a CPU mask that does not include the CPU it's running on, then when
__set_cpus_allowed_ptr() calls stop_one_cpu() intending to invoke
migration_cpu_stop() and perform the actual migration away from the CPU
it will simply return -ENOENT rather than calling migration_cpu_stop().
We then return from the sched_setaffinity syscall back to the user task
that is now running on a CPU which it just asked not to run on, and
which is not present in its cpus_allowed mask.
This patch resolves the problem by having select_task_rq() enforce that
user tasks run on CPUs that are active - the same requirement that
select_fallback_rq() already enforces. This should ensure that newly
onlined CPUs reach the CPUHP_AP_ACTIVE state before being able to
schedule user tasks, and also implies that bringup_wait_for_ap() will
have called stop_machine_unpark() which resolves the sched_setaffinity
issue above.
I haven't yet investigated them, but it may be of interest to review
whether any of the actions performed by hotplug states between
CPUHP_AP_ONLINE_IDLE & CPUHP_AP_ACTIVE could have similar unintended
effects on user tasks that might schedule before they are reached, which
might widen the scope of the problem from just affecting the behaviour
of sched_setaffinity.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180526154648.11635-2-paul.burton@mips.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
|
Peter Zijlstra
|
175f0e25ab |
sched/core: Fix rules for running on online && !active CPUs
As already enforced by the WARN() in __set_cpus_allowed_ptr(), the rules
for running on an online && !active CPU are stricter than just being a
kthread, you need to be a per-cpu kthread.
If you're not strictly per-CPU, you have better CPUs to run on and
don't need the partially booted one to get your work done.
The exception is to allow smpboot threads to bootstrap the CPU itself
and get kernel 'services' initialized before we allow userspace on it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
|
||
|
Patrick Bellasi
|
2539fc82aa |
sched/fair: Update util_est before updating schedutil
When a task is enqueued the estimated utilization of a CPU is updated
to better support the selection of the required frequency.
However, schedutil is (implicitly) updated by update_load_avg() which
always happens before util_est_{en,de}queue(), thus potentially
introducing a latency between estimated utilization updates and
frequency selections.
Let's update util_est at the beginning of enqueue_task_fair(),
which will ensure that all schedutil updates will see the most
updated estimated utilization value for a CPU.
Reported-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Fixes:
|
||
|
Patrick Bellasi
|
8ecf04e112 |
sched/cpufreq: Modify aggregate utilization to always include blocked FAIR utilization
Since the refactoring introduced by: commit |
||
|
Ingo Molnar
|
0548dc5cde |
Merge branch 'sched/urgent' into sched/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Juri Lelli
|
bf5015a50f |
sched/topology: Clarify root domain(s) debug string
When scheduler debug is enabled, building scheduling domains outputs
information about how the domains are laid out and to which root domain
each CPU (or sets of CPUs) belongs, e.g.:
CPU0 attaching sched-domain(s):
domain-0: span=0-5 level=MC
groups: 0:{ span=0 }, 1:{ span=1 }, 2:{ span=2 }, 3:{ span=3 }, 4:{ span=4 }, 5:{ span=5 }
CPU1 attaching sched-domain(s):
domain-0: span=0-5 level=MC
groups: 1:{ span=1 }, 2:{ span=2 }, 3:{ span=3 }, 4:{ span=4 }, 5:{ span=5 }, 0:{ span=0 }
[...]
span: 0-5 (max cpu_capacity = 1024)
The fact that latest line refers to CPUs 0-5 root domain doesn't however look
immediately obvious to me: one might wonder why span 0-5 is reported "again".
Make it more clear by adding "root domain" to it, as to end with the
following:
CPU0 attaching sched-domain(s):
domain-0: span=0-5 level=MC
groups: 0:{ span=0 }, 1:{ span=1 }, 2:{ span=2 }, 3:{ span=3 }, 4:{ span=4 }, 5:{ span=5 }
CPU1 attaching sched-domain(s):
domain-0: span=0-5 level=MC
groups: 1:{ span=1 }, 2:{ span=2 }, 3:{ span=3 }, 4:{ span=4 }, 5:{ span=5 }, 0:{ span=0 }
[...]
root domain span: 0-5 (max cpu_capacity = 1024)
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180524152936.17611-1-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
|
Rafael J. Wysocki
|
a61dec7447 |
cpufreq: schedutil: Avoid missing updates for one-CPU policies
Commit
|
||
|
Joel Fernandes (Google)
|
152db033d7 |
schedutil: Allow cpufreq requests to be made even when kthread kicked
Currently there is a chance of a schedutil cpufreq update request to be dropped if there is a pending update request. This pending request can be delayed if there is a scheduling delay of the irq_work and the wake up of the schedutil governor kthread. A very bad scenario is when a schedutil request was already just made, such as to reduce the CPU frequency, then a newer request to increase CPU frequency (even sched deadline urgent frequency increase requests) can be dropped, even though the rate limits suggest that its Ok to process a request. This is because of the way the work_in_progress flag is used. This patch improves the situation by allowing new requests to happen even though the old one is still being processed. Note that in this approach, if an irq_work was already issued, we just update next_freq and don't bother to queue another request so there's no extra work being done to make this happen. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Viresh Kumar
|
036399782b |
cpufreq: Rename cpufreq_can_do_remote_dvfs()
This routine checks if the CPU running this code belongs to the policy of the target CPU or if not, can it do remote DVFS for it remotely. But the current name of it implies as if it is only about doing remote updates. Rename it to make it more relevant. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Patrick Bellasi
|
fd7d5287fd |
cpufreq: schedutil: Cleanup and document iowait boost
The iowait boosting code has been recently updated to add a progressive
boosting behavior which allows to be less aggressive in boosting tasks
doing only sporadic IO operations, thus being more energy efficient for
example on mobile platforms.
The current code is now however a bit convoluted. Some functionalities
(e.g. iowait boost reset) are replicated in different paths and their
documentation is slightly misaligned.
Let's cleanup the code by consolidating all the IO wait boosting related
functionality within within few dedicated functions and better define
their role:
- sugov_iowait_boost: set/increase the IO wait boost of a CPU
- sugov_iowait_apply: apply/reduce the IO wait boost of a CPU
Both these two function are used at every sugov update and they make
use of a unified IO wait boost reset policy provided by:
- sugov_iowait_reset: reset/disable the IO wait boost of a CPU
if a CPU is not updated for more then one tick
This makes possible a cleaner and more self-contained design for the IO
wait boosting code since the rest of the sugov update routines, both for
single and shared frequency domains, follow the same template:
/* Configure IO boost, if required */
sugov_iowait_boost()
/* Return here if freq change is in progress or throttled */
/* Collect and aggregate utilization information */
sugov_get_util()
sugov_aggregate_util()
/*
* Add IO boost, if currently enabled, on top of the aggregated
* utilization value
*/
sugov_iowait_apply()
As a extra bonus, let's also add the documentation for the new
functions and better align the in-code documentation.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
Patrick Bellasi
|
295f1a9953 |
cpufreq: schedutil: Fix iowait boost reset
A more energy efficient update of the IO wait boosting mechanism has been introduced in: commit |
||
|
Mathieu Malaterre
|
3febfc8a21 |
sched/deadline: Make the grub_reclaim() function static
Since the grub_reclaim() function can be made static, make it so. Silences the following GCC warning (W=1): kernel/sched/deadline.c:1120:5: warning: no previous prototype for ‘grub_reclaim’ [-Wmissing-prototypes] Signed-off-by: Mathieu Malaterre <malat@debian.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180516200902.959-1-malat@debian.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Mathieu Malaterre
|
f6a3463063 |
sched/debug: Move the print_rt_rq() and print_dl_rq() declarations to kernel/sched/sched.h
In the following commit:
|
||
|
Ingo Molnar
|
13a553199f |
Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
- Updates to the handling of expedited grace periods, perhaps most notably parallelizing their initialization. Other changes include fixes from Boqun Feng. - Miscellaneous fixes. These include an nvme fix from Nitzan Carmi that I am carrying because it depends on a new SRCU function cleanup_srcu_struct_quiesced(). This branch also includes fixes from Byungchul Park and Yury Norov. - Updates to reduce lock contention in the rcu_node combining tree. These are in preparation for the consolidation of RCU-bh, RCU-preempt, and RCU-sched into a single flavor, which was requested by Linus Torvalds in response to a security flaw whose root cause included confusion between the multiple flavors of RCU. - Torture-test updates that save their users some time and effort. Conflicts: drivers/nvme/host/core.c Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Christoph Hellwig
|
fddda2b7b5 |
proc: introduce proc_create_seq{,_data}
Variants of proc_create{,_data} that directly take a struct seq_operations
argument and drastically reduces the boilerplate code in the callers.
All trivial callers converted over.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
||
|
Paul E. McKenney
|
c3442697c2 |
softirq: Eliminate unused cond_resched_softirq() macro
The cond_resched_softirq() macro is not used anywhere in mainline, so this commit simplifies the kernel by eliminating it. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Tested-by: Nicholas Piggin <npiggin@gmail.com> |
||
|
Viresh Kumar
|
ecd2884291 |
cpufreq: schedutil: Don't set next_freq to UINT_MAX
The schedutil driver sets sg_policy->next_freq to UINT_MAX on certain occasions to discard the cached value of next freq: - In sugov_start(), when the schedutil governor is started for a group of CPUs. - And whenever we need to force a freq update before rate-limit duration, which happens when: - there is an update in cpufreq policy limits. - Or when the utilization of DL scheduling class increases. In return, get_next_freq() doesn't return a cached next_freq value but recalculates the next frequency instead. But having special meaning for a particular value of frequency makes the code less readable and error prone. We recently fixed a bug where the UINT_MAX value was considered as valid frequency in sugov_update_single(). All we need is a flag which can be used to discard the value of sg_policy->next_freq and we already have need_freq_update for that. Lets reuse it instead of setting next_freq to UINT_MAX. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Dietmar Eggemann
|
1b04722c3b |
Revert "cpufreq: schedutil: Don't restrict kthread to related_cpus unnecessarily"
This reverts commit
|
||
|
Rohit Jain
|
943d355d7f |
sched/core: Distinguish between idle_cpu() calls based on desired effect, introduce available_idle_cpu()
In the following commit:
|
||
|
Mel Gorman
|
1378447598 |
sched/numa: Stagger NUMA balancing scan periods for new threads
Threads share an address space and each can change the protections of the same address space to trap NUMA faults. This is redundant and potentially counter-productive as any thread doing the update will suffice. Potentially only one thread is required but that thread may be idle or it may not have any locality concerns and pick an unsuitable scan rate. This patch uses independent scan period but they are staggered based on the number of address space users when the thread is created. The intent is that threads will avoid scanning at the same time and have a chance to adapt their scan rate later if necessary. This reduces the total scan activity early in the lifetime of the threads. The different in headline performance across a range of machines and workloads is marginal but the system CPU usage is reduced as well as overall scan activity. The following is the time reported by NAS Parallel Benchmark using unbound openmp threads and a D size class: 4.17.0-rc1 4.17.0-rc1 vanilla stagger-v1r1 Time bt.D 442.77 ( 0.00%) 419.70 ( 5.21%) Time cg.D 171.90 ( 0.00%) 180.85 ( -5.21%) Time ep.D 33.10 ( 0.00%) 32.90 ( 0.60%) Time is.D 9.59 ( 0.00%) 9.42 ( 1.77%) Time lu.D 306.75 ( 0.00%) 304.65 ( 0.68%) Time mg.D 54.56 ( 0.00%) 52.38 ( 4.00%) Time sp.D 1020.03 ( 0.00%) 903.77 ( 11.40%) Time ua.D 400.58 ( 0.00%) 386.49 ( 3.52%) Note it's not a universal win but we have no prior knowledge of which thread matters but the number of threads created often exceeds the size of the node when the threads are not bound. However, there is a reducation of overall system CPU usage: 4.17.0-rc1 4.17.0-rc1 vanilla stagger-v1r1 sys-time-bt.D 48.78 ( 0.00%) 48.22 ( 1.15%) sys-time-cg.D 25.31 ( 0.00%) 26.63 ( -5.22%) sys-time-ep.D 1.65 ( 0.00%) 0.62 ( 62.42%) sys-time-is.D 40.05 ( 0.00%) 24.45 ( 38.95%) sys-time-lu.D 37.55 ( 0.00%) 29.02 ( 22.72%) sys-time-mg.D 47.52 ( 0.00%) 34.92 ( 26.52%) sys-time-sp.D 119.01 ( 0.00%) 109.05 ( 8.37%) sys-time-ua.D 51.52 ( 0.00%) 45.13 ( 12.40%) NUMA scan activity is also reduced: NUMA alloc local 1042828 1342670 NUMA base PTE updates 140481138 93577468 NUMA huge PMD updates 272171 180766 NUMA page range updates 279832690 186129660 NUMA hint faults 1395972 1193897 NUMA hint local faults 877925 855053 NUMA hint local percent 62 71 NUMA pages migrated 12057909 9158023 Similar observations are made for other thread-intensive workloads. System CPU usage is lower even though the headline gains in performance tend to be small. For example, specjbb 2005 shows almost no difference in performance but scan activity is reduced by a third on a 4-socket box. I didn't find a workload (thread intensive or otherwise) that suffered badly. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/20180504154109.mvrha2qo5wdl65vr@techsingularity.net Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
dfd5c3ea64 |
Linux 4.17-rc5
-----BEGIN PGP SIGNATURE----- iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlr4xw8eHHRvcnZhbGRz QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGNYoH/1d5zyMpVJVUKZ0K LuEctCGby1PjSvSOhmMuxFVagFAqfBJXmwWTeohLfLG48r/Yk0AsZQ5HH13/8baj k/T8UgUvKZKustndCRp+joQ3Pa1ZpcIFaWRvB8pKFCefJ/F/Lj4B4X1HYI7vLq0K /ZBXUdy3ry0lcVuypnaARYAb2O7l/nyZIjZ3FhiuyymWe7Jpo+G7VK922LOMSX/y VYFZCWa8nxN+yFhO0ao9X5k7ggIiUrEBtbfNrk19VtAn0hx+OYKW2KfJK/eHNey/ CKrOT+KAxU8VU29AEIbYzlL3yrQmULcEoIDiqJ/6m5m6JwsEbP6EqQHs0TiuQFpq A0MO9rw= =yjUP -----END PGP SIGNATURE----- Merge tag 'v4.17-rc5' into sched/core, to pick up fixes and dependencies Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Linus Torvalds
|
66e1c94db3 |
Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/pti updates from Thomas Gleixner:
"A mixed bag of fixes and updates for the ghosts which are hunting us.
The scheduler fixes have been pulled into that branch to avoid
conflicts.
- A set of fixes to address a khread_parkme() race which caused lost
wakeups and loss of state.
- A deadlock fix for stop_machine() solved by moving the wakeups
outside of the stopper_lock held region.
- A set of Spectre V1 array access restrictions. The possible
problematic spots were discuvered by Dan Carpenters new checks in
smatch.
- Removal of an unused file which was forgotten when the rest of that
functionality was removed"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Remove unused file
perf/x86/cstate: Fix possible Spectre-v1 indexing for pkg_msr
perf/x86/msr: Fix possible Spectre-v1 indexing in the MSR driver
perf/x86: Fix possible Spectre-v1 indexing for x86_pmu::event_map()
perf/x86: Fix possible Spectre-v1 indexing for hw_perf_event cache_*
perf/core: Fix possible Spectre-v1 indexing for ->aux_pages[]
sched/autogroup: Fix possible Spectre-v1 indexing for sched_prio_to_weight[]
sched/core: Fix possible Spectre-v1 indexing for sched_prio_to_weight[]
sched/core: Introduce set_special_state()
kthread, sched/wait: Fix kthread_parkme() completion issue
kthread, sched/wait: Fix kthread_parkme() wait-loop
sched/fair: Fix the update of blocked load when newly idle
stop_machine, sched: Fix migrate_swap() vs. active_balance() deadlock
|
||
|
Linus Torvalds
|
86a4ac433b |
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner: "Revert the new NUMA aware placement approach which turned out to create more problems than it solved" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "sched/numa: Delay retrying placement for automatic NUMA balance after wake_affine()" |
||
|
Mel Gorman
|
789ba28013 |
Revert "sched/numa: Delay retrying placement for automatic NUMA balance after wake_affine()"
This reverts commit
|
||
|
Rafael J. Wysocki
|
97739501f2 |
cpufreq: schedutil: Avoid using invalid next_freq
If the next_freq field of struct sugov_policy is set to UINT_MAX, it shouldn't be used for updating the CPU frequency (this is a special "invalid" value), but after commit |
||
|
Juri Lelli
|
a744490f12 |
cpufreq: schedutil: remove stale comment
After commit
|
||
|
Peter Zijlstra
|
354d779307 |
sched/autogroup: Fix possible Spectre-v1 indexing for sched_prio_to_weight[]
> kernel/sched/autogroup.c:230 proc_sched_autogroup_set_nice() warn: potential spectre issue 'sched_prio_to_weight' Userspace controls @nice, sanitize the array index. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Peter Zijlstra
|
7281c8dec8 |
sched/core: Fix possible Spectre-v1 indexing for sched_prio_to_weight[]
> kernel/sched/core.c:6921 cpu_weight_nice_write_s64() warn: potential spectre issue 'sched_prio_to_weight' Userspace controls @nice, so sanitize the value before using it to index an array. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Rohit Jain
|
247f2f6f3c |
sched/core: Don't schedule threads on pre-empted vCPUs
In paravirt configurations today, spinlocks figure out whether a vCPU is
running to determine whether or not spinlock should bother spinning. We
can use the same logic to prioritize CPUs when scheduling threads. If a
vCPU has been pre-empted, it will incur the extra cost of VMENTER and
the time it actually spends to be running on the host CPU. If we had
other vCPUs which were actually running on the host CPU and idle we
should schedule threads there.
Performance numbers:
Note: With patch is referred to as Paravirt in the following and without
patch is referred to as Base.
1) When only 1 VM is running:
a) Hackbench test on KVM 8 vCPUs, 10,000 loops (lower is better):
+-------+-----------------+----------------+
|Number |Paravirt |Base |
|of +---------+-------+-------+--------+
|Threads|Average |Std Dev|Average| Std Dev|
+-------+---------+-------+-------+--------+
|1 |1.817 |0.076 |1.721 | 0.067 |
|2 |3.467 |0.120 |3.468 | 0.074 |
|4 |6.266 |0.035 |6.314 | 0.068 |
|8 |11.437 |0.105 |11.418 | 0.132 |
|16 |21.862 |0.167 |22.161 | 0.129 |
|25 |33.341 |0.326 |33.692 | 0.147 |
+-------+---------+-------+-------+--------+
2) When two VMs are running with same CPU affinities:
a) tbench test on VM 8 cpus
Base:
VM1:
Throughput 220.59 MB/sec 1 clients 1 procs max_latency=12.872 ms
Throughput 448.716 MB/sec 2 clients 2 procs max_latency=7.555 ms
Throughput 861.009 MB/sec 4 clients 4 procs max_latency=49.501 ms
Throughput 1261.81 MB/sec 7 clients 7 procs max_latency=76.990 ms
VM2:
Throughput 219.937 MB/sec 1 clients 1 procs max_latency=12.517 ms
Throughput 470.99 MB/sec 2 clients 2 procs max_latency=12.419 ms
Throughput 841.299 MB/sec 4 clients 4 procs max_latency=37.043 ms
Throughput 1240.78 MB/sec 7 clients 7 procs max_latency=77.489 ms
Paravirt:
VM1:
Throughput 222.572 MB/sec 1 clients 1 procs max_latency=7.057 ms
Throughput 485.993 MB/sec 2 clients 2 procs max_latency=26.049 ms
Throughput 947.095 MB/sec 4 clients 4 procs max_latency=45.338 ms
Throughput 1364.26 MB/sec 7 clients 7 procs max_latency=145.124 ms
VM2:
Throughput 224.128 MB/sec 1 clients 1 procs max_latency=4.564 ms
Throughput 501.878 MB/sec 2 clients 2 procs max_latency=11.061 ms
Throughput 965.455 MB/sec 4 clients 4 procs max_latency=45.370 ms
Throughput 1359.08 MB/sec 7 clients 7 procs max_latency=168.053 ms
b) Hackbench with 4 fd 1,000,000 loops
+-------+--------------------------------------+----------------------------------------+
|Number |Paravirt |Base |
|of +----------+--------+---------+--------+----------+--------+---------+----------+
|Threads|Average1 |Std Dev1|Average2 | Std Dev|Average1 |Std Dev1|Average2 | Std Dev 2|
+-------+----------+--------+---------+--------+----------+--------+---------+----------+
| 1 | 3.748 | 0.620 | 3.576 | 0.432 | 4.006 | 0.395 | 3.446 | 0.787 |
+-------+----------+--------+---------+--------+----------+--------+---------+----------+
Note that this test was run just to show the interference effect
over-subscription can have in baseline
c) schbench results with 2 message groups on 8 vCPU VMs
+-----------+-------+---------------+--------------+------------+
| | | Paravirt | Base | |
+-----------+-------+-------+-------+-------+------+------------+
| |Threads| VM1 | VM2 | VM1 | VM2 |%Improvement|
+-----------+-------+-------+-------+-------+------+------------+
|50.0000th | 1 | 52 | 53 | 58 | 54 | +6.25% |
|75.0000th | 1 | 69 | 61 | 83 | 59 | +8.45% |
|90.0000th | 1 | 80 | 80 | 89 | 83 | +6.98% |
|95.0000th | 1 | 83 | 83 | 93 | 87 | +7.78% |
|*99.0000th | 1 | 92 | 94 | 99 | 97 | +5.10% |
|99.5000th | 1 | 95 | 100 | 102 | 103 | +4.88% |
|99.9000th | 1 | 107 | 123 | 105 | 203 | +25.32% |
+-----------+-------+-------+-------+-------+------+------------+
|50.0000th | 2 | 56 | 62 | 67 | 59 | +6.35% |
|75.0000th | 2 | 69 | 75 | 80 | 71 | +4.64% |
|90.0000th | 2 | 80 | 82 | 90 | 81 | +5.26% |
|95.0000th | 2 | 85 | 87 | 97 | 91 | +8.51% |
|*99.0000th | 2 | 98 | 99 | 107 | 109 | +8.79% |
|99.5000th | 2 | 107 | 105 | 109 | 116 | +5.78% |
|99.9000th | 2 | 9968 | 609 | 875 | 3116 | -165.02% |
+-----------+-------+-------+-------+-------+------+------------+
|50.0000th | 4 | 78 | 77 | 78 | 79 | +1.27% |
|75.0000th | 4 | 98 | 106 | 100 | 104 | 0.00% |
|90.0000th | 4 | 987 | 1001 | 995 | 1015 | +1.09% |
|95.0000th | 4 | 4136 | 5368 | 5752 | 5192 | +13.16% |
|*99.0000th | 4 | 11632 | 11344 | 11024| 10736| -5.59% |
|99.5000th | 4 | 12624 | 13040 | 12720| 12144| -3.22% |
|99.9000th | 4 | 13168 | 18912 | 14992| 17824| +2.24% |
+-----------+-------+-------+-------+-------+------+------------+
Note: Improvement is measured for (VM1+VM2)
Signed-off-by: Rohit Jain <rohit.k.jain@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dhaval.giani@oracle.com
Cc: matt@codeblueprint.co.uk
Cc: steven.sistare@oracle.com
Cc: subhra.mazumdar@oracle.com
Link: http://lkml.kernel.org/r/1525294330-7759-1-git-send-email-rohit.k.jain@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
|
Viresh Kumar
|
c976a862ba |
sched/fair: Avoid calling sync_entity_load_avg() unnecessarily
Call sync_entity_load_avg() directly from find_idlest_cpu() instead of select_task_rq_fair(), as that's where we need to use task's utilization value. And call sync_entity_load_avg() only after making sure sched domain spans over one of the allowed CPUs for the task. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Guittot <vincent.guittot@linaro.org> Link: http://lkml.kernel.org/r/cd019d1753824c81130eae7b43e2bbcec47cc1ad.1524738578.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Viresh Kumar
|
f1d88b4468 |
sched/fair: Rearrange select_task_rq_fair() to optimize it
Rearrange select_task_rq_fair() a bit to avoid executing some conditional statements in few specific code-paths. That gets rid of the goto as well. This shouldn't result in any functional changes. Tested-by: Rohit Jain <rohit.k.jain@oracle.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincent Guittot <vincent.guittot@linaro.org> Link: http://lkml.kernel.org/r/20831b8d237bf3a20e4e328286f678b425ff04c9.1524738578.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Peter Zijlstra
|
b5bf9a90bb |
sched/core: Introduce set_special_state()
Gaurav reported a perceived problem with TASK_PARKED, which turned out to be a broken wait-loop pattern in __kthread_parkme(), but the reported issue can (and does) in fact happen for states that do not do condition based sleeps. When the 'current->state = TASK_RUNNING' store of a previous (concurrent) try_to_wake_up() collides with the setting of a 'special' sleep state, we can loose the sleep state. Normal condition based wait-loops are immune to this problem, but for sleep states that are not condition based are subject to this problem. There already is a fix for TASK_DEAD. Abstract that and also apply it to TASK_STOPPED and TASK_TRACED, both of which are also without condition based wait-loop. Reported-by: Gaurav Kohli <gkohli@codeaurora.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Peter Zijlstra
|
85f1abe001 |
kthread, sched/wait: Fix kthread_parkme() completion issue
Even with the wait-loop fixed, there is a further issue with kthread_parkme(). Upon hotplug, when we do takedown_cpu(), smpboot_park_threads() can return before all those threads are in fact blocked, due to the placement of the complete() in __kthread_parkme(). When that happens, sched_cpu_dying() -> migrate_tasks() can end up migrating such a still runnable task onto another CPU. Normally the task will have hit schedule() and gone to sleep by the time we do kthread_unpark(), which will then do __kthread_bind() to re-bind the task to the correct CPU. However, when we loose the initial TASK_PARKED store to the concurrent wakeup issue described previously, do the complete(), get migrated, it is possible to either: - observe kthread_unpark()'s clearing of SHOULD_PARK and terminate the park and set TASK_RUNNING, or - __kthread_bind()'s wait_task_inactive() to observe the competing TASK_RUNNING store. Either way the WARN() in __kthread_bind() will trigger and fail to correctly set the CPU affinity. Fix this by only issuing the complete() when the kthread has scheduled out. This does away with all the icky 'still running' nonsense. The alternative is to promote TASK_PARKED to a special state, this guarantees wait_task_inactive() cannot observe a 'stale' TASK_RUNNING and we'll end up doing the right thing, but this preserves the whole icky business of potentially migating the still runnable thing. Reported-by: Gaurav Kohli <gkohli@codeaurora.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
457be908c8 |
sched/fair: Fix the update of blocked load when newly idle
With commit: |
||
|
Linus Torvalds
|
71b8ebbf3d |
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"A few scheduler fixes:
- Prevent a bogus warning vs. runqueue clock update flags in
do_sched_rt_period_timer()
- Simplify the helper functions which handle requests for skipping
the runqueue clock updat.
- Do not unlock the tunables mutex in the error path of the cpu
frequency scheduler utils. Its not held.
- Enforce proper alignement for 'struct util_est' in sched_avg to
prevent a misalignment fault on IA64"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Force proper alignment of 'struct util_est'
sched/core: Simplify helpers for rq clock update skip requests
sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning
sched/cpufreq/schedutil: Fix error path mutex unlock
|
||
|
Linus Torvalds
|
1fe43114ea |
More power management updates for 4.17-rc1
- Rework the idle loop in order to prevent CPUs from spending too
much time in shallow idle states by making it stop the scheduler
tick before putting the CPU into an idle state only if the idle
duration predicted by the idle governor is long enough. That
required the code to be reordered to invoke the idle governor
before stopping the tick, among other things (Rafael Wysocki,
Frederic Weisbecker, Arnd Bergmann).
- Add the missing description of the residency sysfs attribute to
the cpuidle documentation (Prashanth Prakash).
- Finalize the cpufreq cleanup moving frequency table validation
from drivers to the core (Viresh Kumar).
- Fix a clock leak regression in the armada-37xx cpufreq driver
(Gregory Clement).
- Fix the initialization of the CPU performance data structures
for shared policies in the CPPC cpufreq driver (Shunyong Yang).
- Clean up the ti-cpufreq, intel_pstate and CPPC cpufreq drivers
a bit (Viresh Kumar, Rafael Wysocki).
- Mark the expected switch fall-throughs in the PM QoS core (Gustavo
Silva).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Pnk4
-----END PGP SIGNATURE-----
Merge tag 'pm-4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These include one big-ticket item which is the rework of the idle loop
in order to prevent CPUs from spending too much time in shallow idle
states. It reduces idle power on some systems by 10% or more and may
improve performance of workloads in which the idle loop overhead
matters. This has been in the works for several weeks and it has been
tested and reviewed quite thoroughly.
Also included are changes that finalize the cpufreq cleanup moving
frequency table validation from drivers to the core, a few fixes and
cleanups of cpufreq drivers, a cpuidle documentation update and a PM
QoS core update to mark the expected switch fall-throughs in it.
Specifics:
- Rework the idle loop in order to prevent CPUs from spending too
much time in shallow idle states by making it stop the scheduler
tick before putting the CPU into an idle state only if the idle
duration predicted by the idle governor is long enough.
That required the code to be reordered to invoke the idle governor
before stopping the tick, among other things (Rafael Wysocki,
Frederic Weisbecker, Arnd Bergmann).
- Add the missing description of the residency sysfs attribute to the
cpuidle documentation (Prashanth Prakash).
- Finalize the cpufreq cleanup moving frequency table validation from
drivers to the core (Viresh Kumar).
- Fix a clock leak regression in the armada-37xx cpufreq driver
(Gregory Clement).
- Fix the initialization of the CPU performance data structures for
shared policies in the CPPC cpufreq driver (Shunyong Yang).
- Clean up the ti-cpufreq, intel_pstate and CPPC cpufreq drivers a
bit (Viresh Kumar, Rafael Wysocki).
- Mark the expected switch fall-throughs in the PM QoS core (Gustavo
Silva)"
* tag 'pm-4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
tick-sched: avoid a maybe-uninitialized warning
cpufreq: Drop cpufreq_table_validate_and_show()
cpufreq: SCMI: Don't validate the frequency table twice
cpufreq: CPPC: Initialize shared perf capabilities of CPUs
cpufreq: armada-37xx: Fix clock leak
cpufreq: CPPC: Don't set transition_latency
cpufreq: ti-cpufreq: Use builtin_platform_driver()
cpufreq: intel_pstate: Do not include debugfs.h
PM / QoS: mark expected switch fall-throughs
cpuidle: Add definition of residency to sysfs documentation
time: hrtimer: Use timerqueue_iterate_next() to get to the next timer
nohz: Avoid duplication of code related to got_idle_tick
nohz: Gather tick_sched booleans under a common flag field
cpuidle: menu: Avoid selecting shallow states with stopped tick
cpuidle: menu: Refine idle state selection for running tick
sched: idle: Select idle state before stopping the tick
time: hrtimer: Introduce hrtimer_next_event_without()
time: tick-sched: Split tick_nohz_stop_sched_tick()
cpuidle: Return nohz hint from cpuidle_select()
jiffies: Introduce USER_TICK_USEC and redefine TICK_USEC
...
|
||
|
Rafael J. Wysocki
|
554c8aa8ec |
sched: idle: Select idle state before stopping the tick
In order to address the issue with short idle duration predictions by the idle governor after the scheduler tick has been stopped, reorder the code in cpuidle_idle_call() so that the governor idle state selection runs before tick_nohz_idle_go_idle() and use the "nohz" hint returned by cpuidle_select() to decide whether or not to stop the tick. This isn't straightforward, because menu_select() invokes tick_nohz_get_sleep_length() to get the time to the next timer event and the number returned by the latter comes from __tick_nohz_idle_stop_tick(). Fortunately, however, it is possible to compute that number without actually stopping the tick and with the help of the existing code. Namely, tick_nohz_get_sleep_length() can be made call tick_nohz_next_event(), introduced earlier, to get the time to the next non-highres timer event. If that happens, tick_nohz_next_event() need not be called by __tick_nohz_idle_stop_tick() again. If it turns out that the scheduler tick cannot be stopped going forward or the next timer event is too close for the tick to be stopped, tick_nohz_get_sleep_length() can simply return the time to the next event currently programmed into the corresponding clock event device. In addition to knowing the return value of tick_nohz_next_event(), however, tick_nohz_get_sleep_length() needs to know the time to the next highres timer event, but with the scheduler tick timer excluded, which can be computed with the help of hrtimer_get_next_event(). That minimum of that number and the tick_nohz_next_event() return value is the total time to the next timer event with the assumption that the tick will be stopped. It can be returned to the idle governor which can use it for predicting idle duration (under the assumption that the tick will be stopped) and deciding whether or not it makes sense to stop the tick before putting the CPU into the selected idle state. With the above, the sleep_length field in struct tick_sched is not necessary any more, so drop it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=199227 Reported-by: Doug Smythies <dsmythies@telus.net> Reported-by: Thomas Ilsche <thomas.ilsche@tu-dresden.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> |
||
|
Rafael J. Wysocki
|
45f1ff59e2 |
cpuidle: Return nohz hint from cpuidle_select()
Add a new pointer argument to cpuidle_select() and to the ->select
cpuidle governor callback to allow a boolean value indicating
whether or not the tick should be stopped before entering the
selected state to be returned from there.
Make the ladder governor ignore that pointer (to preserve its
current behavior) and make the menu governor return 'false" through
it if:
(1) the idle exit latency is constrained at 0, or
(2) the selected state is a polling one, or
(3) the expected idle period duration is within the tick period
range.
In addition to that, the correction factor computations in the menu
governor need to take the possibility that the tick may not be
stopped into account to avoid artificially small correction factor
values. To that end, add a mechanism to record tick wakeups, as
suggested by Peter Zijlstra, and use it to modify the menu_update()
behavior when tick wakeup occurs. Namely, if the CPU is woken up by
the tick and the return value of tick_nohz_get_sleep_length() is not
within the tick boundary, the predicted idle duration is likely too
short, so make menu_update() try to compensate for that by updating
the governor statistics as though the CPU was idle for a long time.
Since the value returned through the new argument pointer of
cpuidle_select() is not used by its caller yet, this change by
itself is not expected to alter the functionality of the code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
||
|
Mark Rutland
|
3eda69c92d |
kernel/fork.c: detect early free of a live mm
KASAN splats indicate that in some cases we free a live mm, then continue to access it, with potentially disastrous results. This is likely due to a mismatched mmdrop() somewhere in the kernel, but so far the culprit remains elusive. Let's have __mmdrop() verify that the mm isn't live for the current task, similar to the existing check for init_mm. This way, we can catch this class of issue earlier, and without requiring KASAN. Currently, idle_task_exit() leaves active_mm stale after it switches to init_mm. This isn't harmful, but will trigger the new assertions, so we must adjust idle_task_exit() to update active_mm. Link: http://lkml.kernel.org/r/20180312140103.19235-1-mark.rutland@arm.com Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Rafael J. Wysocki
|
ed98c34919 |
sched: idle: Do not stop the tick before cpuidle_idle_call()
Make cpuidle_idle_call() decide whether or not to stop the tick. First, the cpuidle_enter_s2idle() path deals with the tick (and with the entire timekeeping for that matter) by itself and it doesn't need the tick to be stopped beforehand. Second, to address the issue with short idle duration predictions by the idle governor after the tick has been stopped, it will be necessary to change the ordering of cpuidle_select() with respect to tick_nohz_idle_stop_tick(). To prepare for that, put a tick_nohz_idle_stop_tick() call in the same branch in which cpuidle_select() is called. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> |
||
|
Rafael J. Wysocki
|
2aaf709a51 |
sched: idle: Do not stop the tick upfront in the idle loop
Push the decision whether or not to stop the tick somewhat deeper into the idle loop. Stopping the tick upfront leads to unpleasant outcomes in case the idle governor doesn't agree with the nohz code on the duration of the upcoming idle period. Specifically, if the tick has been stopped and the idle governor predicts short idle, the situation is bad regardless of whether or not the prediction is accurate. If it is accurate, the tick has been stopped unnecessarily which means excessive overhead. If it is not accurate, the CPU is likely to spend too much time in the (shallow, because short idle has been predicted) idle state selected by the governor [1]. As the first step towards addressing this problem, change the code to make the tick stopping decision inside of the loop in do_idle(). In particular, do not stop the tick in the cpu_idle_poll() code path. Also don't do that in tick_nohz_irq_exit() which doesn't really have enough information on whether or not to stop the tick. Link: https://marc.info/?l=linux-pm&m=150116085925208&w=2 # [1] Link: https://tu-dresden.de/zih/forschung/ressourcen/dateien/projekte/haec/powernightmares.pdf Suggested-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> |
||
|
Rafael J. Wysocki
|
0e7767687f |
time: tick-sched: Reorganize idle tick management code
Prepare the scheduler tick code for reworking the idle loop to avoid stopping the tick in some cases. The idea is to split the nohz idle entry call to decouple the idle time stats accounting and preparatory work from the actual tick stop code, in order to later be able to delay the tick stop once we reach more power-knowledgeable callers. Move away the tick_nohz_start_idle() invocation from __tick_nohz_idle_enter(), rename the latter to __tick_nohz_idle_stop_tick() and define tick_nohz_idle_stop_tick() as a wrapper around it for calling it from the outside. Make tick_nohz_idle_enter() only call tick_nohz_start_idle() instead of calling the entire __tick_nohz_idle_enter(), add another wrapper disabling and enabling interrupts around tick_nohz_idle_stop_tick() and make the current callers of tick_nohz_idle_enter() call it too to retain their current functionality. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> |
||
|
Davidlohr Bueso
|
adcc8da885 |
sched/core: Simplify helpers for rq clock update skip requests
By renaming the functions we can get rid of the skip parameter and have better code redability. It makes zero sense to have things such as: rq_clock_skip_update(rq, false) When the skip request is in fact not going to happen. Ever. Rename things such that we end up with: rq_clock_skip_update(rq) rq_clock_cancel_skipupdate(rq) Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Cc: matt@codeblueprint.co.uk Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/20180404161539.nhadkff2aats74jh@linux-n805 Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Davidlohr Bueso
|
d29a20645d |
sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning
While running rt-tests' pi_stress program I got the following splat: rq->clock_update_flags < RQCF_ACT_SKIP WARNING: CPU: 27 PID: 0 at kernel/sched/sched.h:960 assert_clock_updated.isra.38.part.39+0x13/0x20 [...] <IRQ> enqueue_top_rt_rq+0xf4/0x150 ? cpufreq_dbs_governor_start+0x170/0x170 sched_rt_rq_enqueue+0x65/0x80 sched_rt_period_timer+0x156/0x360 ? sched_rt_rq_enqueue+0x80/0x80 __hrtimer_run_queues+0xfa/0x260 hrtimer_interrupt+0xcb/0x220 smp_apic_timer_interrupt+0x62/0x120 apic_timer_interrupt+0xf/0x20 </IRQ> [...] do_idle+0x183/0x1e0 cpu_startup_entry+0x5f/0x70 start_secondary+0x192/0x1d0 secondary_startup_64+0xa5/0xb0 We can get rid of it be the "traditional" means of adding an update_rq_clock() call after acquiring the rq->lock in do_sched_rt_period_timer(). The case for the RT task throttling (which this workload also hits) can be ignored in that the skip_update call is actually bogus and quite the contrary (the request bits are removed/reverted). By setting RQCF_UPDATED we really don't care if the skip is happening or not and will therefore make the assert_clock_updated() check happy. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Cc: linux-kernel@vger.kernel.org Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/20180402164954.16255-1-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Ingo Molnar
|
ea2a6af517 |
Merge branch 'linus' into sched/urgent, to pick up fixes and updates
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Linus Torvalds
|
642e7fd233 |
Merge branch 'syscalls-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull removal of in-kernel calls to syscalls from Dominik Brodowski:
"System calls are interaction points between userspace and the kernel.
Therefore, system call functions such as sys_xyzzy() or
compat_sys_xyzzy() should only be called from userspace via the
syscall table, but not from elsewhere in the kernel.
At least on 64-bit x86, it will likely be a hard requirement from
v4.17 onwards to not call system call functions in the kernel: It is
better to use use a different calling convention for system calls
there, where struct pt_regs is decoded on-the-fly in a syscall wrapper
which then hands processing over to the actual syscall function. This
means that only those parameters which are actually needed for a
specific syscall are passed on during syscall entry, instead of
filling in six CPU registers with random user space content all the
time (which may cause serious trouble down the call chain). Those
x86-specific patches will be pushed through the x86 tree in the near
future.
Moreover, rules on how data may be accessed may differ between kernel
data and user data. This is another reason why calling sys_xyzzy() is
generally a bad idea, and -- at most -- acceptable in arch-specific
code.
This patchset removes all in-kernel calls to syscall functions in the
kernel with the exception of arch/. On top of this, it cleans up the
three places where many syscalls are referenced or prototyped, namely
kernel/sys_ni.c, include/linux/syscalls.h and include/linux/compat.h"
* 'syscalls-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: (109 commits)
bpf: whitelist all syscalls for error injection
kernel/sys_ni: remove {sys_,sys_compat} from cond_syscall definitions
kernel/sys_ni: sort cond_syscall() entries
syscalls/x86: auto-create compat_sys_*() prototypes
syscalls: sort syscall prototypes in include/linux/compat.h
net: remove compat_sys_*() prototypes from net/compat.h
syscalls: sort syscall prototypes in include/linux/syscalls.h
kexec: move sys_kexec_load() prototype to syscalls.h
x86/sigreturn: use SYSCALL_DEFINE0
x86: fix sys_sigreturn() return type to be long, not unsigned long
x86/ioport: add ksys_ioperm() helper; remove in-kernel calls to sys_ioperm()
mm: add ksys_readahead() helper; remove in-kernel calls to sys_readahead()
mm: add ksys_mmap_pgoff() helper; remove in-kernel calls to sys_mmap_pgoff()
mm: add ksys_fadvise64_64() helper; remove in-kernel call to sys_fadvise64_64()
fs: add ksys_fallocate() wrapper; remove in-kernel calls to sys_fallocate()
fs: add ksys_p{read,write}64() helpers; remove in-kernel calls to syscalls
fs: add ksys_truncate() wrapper; remove in-kernel calls to sys_truncate()
fs: add ksys_sync_file_range helper(); remove in-kernel calls to syscall
kernel: add ksys_setsid() helper; remove in-kernel call to sys_setsid()
kernel: add ksys_unshare() helper; remove in-kernel calls to sys_unshare()
...
|
||
|
Linus Torvalds
|
ce6eba3dba |
Merge branch 'sched-wait-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull wait_var_event updates from Ingo Molnar: "This introduces the new wait_var_event() API, which is a more flexible waiting primitive than wait_on_atomic_t(). All wait_on_atomic_t() users are migrated over to the new API and wait_on_atomic_t() is removed. The migration fixes one bug and should result in no functional changes for the other usecases" * 'sched-wait-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/wait: Improve __var_waitqueue() code generation sched/wait: Remove the wait_on_atomic_t() API sched/wait, arch/mips: Fix and convert wait_on_atomic_t() usage to the new wait_var_event() API sched/wait, fs/ocfs2: Convert wait_on_atomic_t() usage to the new wait_var_event() API sched/wait, fs/nfs: Convert wait_on_atomic_t() usage to the new wait_var_event() API sched/wait, fs/fscache: Convert wait_on_atomic_t() usage to the new wait_var_event() API sched/wait, fs/btrfs: Convert wait_on_atomic_t() usage to the new wait_var_event() API sched/wait, fs/afs: Convert wait_on_atomic_t() usage to the new wait_var_event() API sched/wait, drivers/media: Convert wait_on_atomic_t() usage to the new wait_var_event() API sched/wait, drivers/drm: Convert wait_on_atomic_t() usage to the new wait_var_event() API sched/wait: Introduce wait_var_event() |
||
|
Linus Torvalds
|
46e0d28bdb |
Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main scheduler changes in this cycle were:
- NUMA balancing improvements (Mel Gorman)
- Further load tracking improvements (Patrick Bellasi)
- Various NOHZ balancing cleanups and optimizations (Peter Zijlstra)
- Improve blocked load handling, in particular we can now reduce and
eventually stop periodic load updates on 'very idle' CPUs. (Vincent
Guittot)
- On isolated CPUs offload the final 1Hz scheduler tick as well, plus
related cleanups and reorganization. (Frederic Weisbecker)
- Core scheduler code cleanups (Ingo Molnar)"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
sched/core: Update preempt_notifier_key to modern API
sched/cpufreq: Rate limits for SCHED_DEADLINE
sched/fair: Update util_est only on util_avg updates
sched/cpufreq/schedutil: Use util_est for OPP selection
sched/fair: Use util_est in LB and WU paths
sched/fair: Add util_est on top of PELT
sched/core: Remove TASK_ALL
sched/completions: Use bool in try_wait_for_completion()
sched/fair: Update blocked load when newly idle
sched/fair: Move idle_balance()
sched/nohz: Merge CONFIG_NO_HZ_COMMON blocks
sched/fair: Move rebalance_domains()
sched/nohz: Optimize nohz_idle_balance()
sched/fair: Reduce the periodic update duration
sched/nohz: Stop NOHZ stats when decayed
sched/cpufreq: Provide migration hint
sched/nohz: Clean up nohz enter/exit
sched/fair: Update blocked load from NEWIDLE
sched/fair: Add NOHZ stats balancing
sched/fair: Restructure nohz_balance_kick()
...
|
||
|
Dominik Brodowski
|
7d4dd4f159 |
sched: add do_sched_yield() helper; remove in-kernel call to sched_yield()
Using the sched-internal do_sched_yield() helper allows us to get rid of the sched-internal call to the sys_sched_yield() syscall. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Ingo Molnar <mingo@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> |
||
|
Jules Maselbas
|
1b5d43cfb6 |
sched/cpufreq/schedutil: Fix error path mutex unlock
This patch prevents the 'global_tunables_lock' mutex from being unlocked before being locked. This mutex is not locked if the sugov_kthread_create() function fails. Signed-off-by: Jules Maselbas <jules.maselbas@arm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Chris Redpath <chris.redpath@arm.com> Cc: Dietmar Eggermann <dietmar.eggemann@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Patrick Bellasi <patrick.bellasi@arm.com> Cc: Stephen Kyle <stephen.kyle@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Cc: nd@arm.com Link: http://lkml.kernel.org/r/20180329144301.38419-1-jules.maselbas@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Davidlohr Bueso
|
b720342849 |
sched/core: Update preempt_notifier_key to modern API
No changes in refcount semantics, use DEFINE_STATIC_KEY_FALSE() for initialization and replace: static_key_slow_inc|dec() => static_branch_inc|dec() static_key_false() => static_branch_unlikely() Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: akpm@linux-foundation.org Link: http://lkml.kernel.org/r/20180326210929.5244-4-dave@stgolabs.net Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Linus Torvalds
|
bf45bae961 |
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar: "Two sched debug output related fixes: a console output fix and formatting fixes" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Adjust newlines for better alignment sched/debug: Fix per-task line continuation for console output |
||
|
Claudio Scordino
|
e97a90f706 |
sched/cpufreq: Rate limits for SCHED_DEADLINE
When the SCHED_DEADLINE scheduling class increases the CPU utilization, it should not wait for the rate limit, otherwise it may miss some deadline. Tests using rt-app on Exynos5422 with up to 10 SCHED_DEADLINE tasks have shown reductions of even 10% of deadline misses with a negligible increase of energy consumption (measured through Baylibre Cape). Signed-off-by: Claudio Scordino <claudio@evidence.eu.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: linux-pm@vger.kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Patrick Bellasi <patrick.bellasi@arm.com> Cc: Todd Kjos <tkjos@android.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://lkml.kernel.org/r/1520937340-2755-1-git-send-email-claudio@evidence.eu.com |
||
|
Joe Lawrence
|
e9ca267096 |
sched/debug: Adjust newlines for better alignment
Scheduler debug stats include newlines that display out of alignment
when prefixed by timestamps. For example, the dmesg utility:
% echo t > /proc/sysrq-trigger
% dmesg
...
[ 83.124251]
runnable tasks:
S task PID tree-key switches prio wait-time
sum-exec sum-sleep
-----------------------------------------------------------------------------------------------------------
At the same time, some syslog utilities (like rsyslog by default) don't
like the additional newlines control characters, saving lines like this
to /var/log/messages:
Mar 16 16:02:29 localhost kernel: #012runnable tasks:#012 S task PID tree-key ...
^^^^ ^^^^
Clean these up by moving newline characters to their own SEQ_printf
invocation. This leaves the /proc/sched_debug unchanged, but brings the
entire output into alignment when prefixed:
% echo t > /proc/sysrq-trigger
% dmesg
...
[ 62.410368] runnable tasks:
[ 62.410368] S task PID tree-key switches prio wait-time sum-exec sum-sleep
[ 62.410369] -----------------------------------------------------------------------------------------------------------
[ 62.410369] I kworker/u12:0 5 1932.215593 332 120 0.000000 3.621252 0.000000 0 0 /
and no escaped control characters from rsyslog in /var/log/messages:
Mar 16 16:15:06 localhost kernel: runnable tasks:
Mar 16 16:15:06 localhost kernel: S task PID tree-key ...
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1521484555-8620-3-git-send-email-joe.lawrence@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
|
Joe Lawrence
|
a8c024cd9b |
sched/debug: Fix per-task line continuation for console output
When the SEQ_printf() macro prints to the console, it runs a simple printk() without KERN_CONT "continued" line printing. The result of this is oddly wrapped task info, for example: % echo t > /proc/sysrq-trigger % dmesg ... runnable tasks: ... [ 29.608611] I [ 29.608613] rcu_sched 8 3252.013846 4087 120 [ 29.608614] 0.000000 29.090111 0.000000 [ 29.608615] 0 0 [ 29.608616] / Modify SEQ_printf to use pr_cont() for expected one-line results: % echo t > /proc/sysrq-trigger % dmesg ... runnable tasks: ... [ 106.716329] S cpuhp/5 37 2006.315026 14 120 0.000000 0.496893 0.000000 0 0 / Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1521484555-8620-2-git-send-email-joe.lawrence@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Peter Zijlstra
|
b3fc5c9bb3 |
sched/wait: Improve __var_waitqueue() code generation
Since we fixed hash_64() to not suck there is no need to play games to attempt to improve the hash value on 64-bit. Also, since we don't use the bit value for the variables, use hash_ptr() directly. No change in functionality. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Peter Zijlstra
|
9b8cce52c4 |
sched/wait: Remove the wait_on_atomic_t() API
There are no users left (everyone got converted to wait_var_event()), remove it. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Peter Zijlstra
|
6b2bb7265f |
sched/wait: Introduce wait_var_event()
As a replacement for the wait_on_atomic_t() API provide the wait_var_event() API. The wait_var_event() API is based on the very same hashed-waitqueue idea, but doesn't care about the type (atomic_t) or the specific condition (atomic_read() == 0). IOW. it's much more widely applicable/flexible. It shares all the benefits/disadvantages of a hashed-waitqueue approach with the existing wait_on_atomic_t/wait_on_bit() APIs. The API is modeled after the existing wait_event() API, but instead of taking a wait_queue_head, it takes an address. This addresses is hashed to obtain a wait_queue_head from the bit_wait_table. Similar to the wait_event() API, it takes a condition expression as second argument and will wait until this expression becomes true. The following are (mostly) identical replacements: wait_on_atomic_t(&my_atomic, atomic_t_wait, TASK_UNINTERRUPTIBLE); wake_up_atomic_t(&my_atomic); wait_var_event(&my_atomic, !atomic_read(&my_atomic)); wake_up_var(&my_atomic); The only difference is that wake_up_var() is an unconditional wakeup and doesn't check the previously hard-coded (atomic_read() == 0) condition here. This is of little concequence, since most callers are already conditional on atomic_dec_and_test() and the ones that are not, are trivial to make so. Tested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: David Howells <dhowells@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Patrick Bellasi
|
d519329f72 |
sched/fair: Update util_est only on util_avg updates
The estimated utilization of a task is currently updated every time the task is dequeued. However, to keep overheads under control, PELT signals are effectively updated at maximum once every 1ms. Thus, for really short running tasks, it can happen that their util_avg value has not been updates since their last enqueue. If such tasks are also frequently running tasks (e.g. the kind of workload generated by hackbench) it can also happen that their util_avg is updated only every few activations. This means that updating util_est at every dequeue potentially introduces not necessary overheads and it's also conceptually wrong if the util_avg signal has never been updated during a task activation. Let's introduce a throttling mechanism on task's util_est updates to sync them with util_avg updates. To make the solution memory efficient, both in terms of space and load/store operations, we encode a synchronization flag into the LSB of util_est.enqueued. This makes util_est an even values only metric, which is still considered good enough for its purpose. The synchronization bit is (re)set by __update_load_avg_se() once the PELT signal of a task has been updated during its last activation. Such a throttling mechanism allows to keep under control util_est overheads in the wakeup hot path, thus making it a suitable mechanism which can be enabled also on high-intensity workload systems. Thus, this now switches on by default the estimation utilization scheduler feature. Suggested-by: Chris Redpath <chris.redpath@arm.com> Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Steve Muckle <smuckle@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@android.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: http://lkml.kernel.org/r/20180309095245.11071-5-patrick.bellasi@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Patrick Bellasi
|
a07630b8b2 |
sched/cpufreq/schedutil: Use util_est for OPP selection
When schedutil looks at the CPU utilization, the current PELT value for that CPU is returned straight away. In certain scenarios this can have undesired side effects and delays on frequency selection. For example, since the task utilization is decayed at wakeup time, a long sleeping big task newly enqueued does not add immediately a significant contribution to the target CPU. This introduces some latency before schedutil will be able to detect the best frequency required by that task. Moreover, the PELT signal build-up time is a function of the current frequency, because of the scale invariant load tracking support. Thus, starting from a lower frequency, the utilization build-up time will increase even more and further delays the selection of the actual frequency which better serves the task requirements. In order to reduce these kind of latencies, we integrate the usage of the CPU's estimated utilization in the sugov_get_util function. This allows to properly consider the expected utilization of a CPU which, for example, has just got a big task running after a long sleep period. Ultimately this allows to select the best frequency to run a task right after its wake-up. Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Joel Fernandes <joelaf@google.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steve Muckle <smuckle@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@android.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Link: http://lkml.kernel.org/r/20180309095245.11071-4-patrick.bellasi@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Patrick Bellasi
|
f9be3e5961 |
sched/fair: Use util_est in LB and WU paths
When the scheduler looks at the CPU utilization, the current PELT value for a CPU is returned straight away. In certain scenarios this can have undesired side effects on task placement. For example, since the task utilization is decayed at wakeup time, when a long sleeping big task is enqueued it does not add immediately a significant contribution to the target CPU. As a result we generate a race condition where other tasks can be placed on the same CPU while it is still considered relatively empty. In order to reduce this kind of race conditions, this patch introduces the required support to integrate the usage of the CPU's estimated utilization in the wakeup path, via cpu_util_wake(), as well as in the load-balance path, via cpu_util() which is used by update_sg_lb_stats(). The estimated utilization of a CPU is defined to be the maximum between its PELT's utilization and the sum of the estimated utilization (at previous dequeue time) of all the tasks currently RUNNABLE on that CPU. This allows to properly represent the spare capacity of a CPU which, for example, has just got a big task running since a long sleep period. Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Steve Muckle <smuckle@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@android.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: http://lkml.kernel.org/r/20180309095245.11071-3-patrick.bellasi@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Patrick Bellasi
|
7f65ea42eb |
sched/fair: Add util_est on top of PELT
The util_avg signal computed by PELT is too variable for some use-cases.
For example, a big task waking up after a long sleep period will have its
utilization almost completely decayed. This introduces some latency before
schedutil will be able to pick the best frequency to run a task.
The same issue can affect task placement. Indeed, since the task
utilization is already decayed at wakeup, when the task is enqueued in a
CPU, this can result in a CPU running a big task as being temporarily
represented as being almost empty. This leads to a race condition where
other tasks can be potentially allocated on a CPU which just started to run
a big task which slept for a relatively long period.
Moreover, the PELT utilization of a task can be updated every [ms], thus
making it a continuously changing value for certain longer running
tasks. This means that the instantaneous PELT utilization of a RUNNING
task is not really meaningful to properly support scheduler decisions.
For all these reasons, a more stable signal can do a better job of
representing the expected/estimated utilization of a task/cfs_rq.
Such a signal can be easily created on top of PELT by still using it as
an estimator which produces values to be aggregated on meaningful
events.
This patch adds a simple implementation of util_est, a new signal built on
top of PELT's util_avg where:
util_est(task) = max(task::util_avg, f(task::util_avg@dequeue))
This allows to remember how big a task has been reported by PELT in its
previous activations via f(task::util_avg@dequeue), which is the new
_task_util_est(struct task_struct*) function added by this patch.
If a task should change its behavior and it runs longer in a new
activation, after a certain time its util_est will just track the
original PELT signal (i.e. task::util_avg).
The estimated utilization of cfs_rq is defined only for root ones.
That's because the only sensible consumer of this signal are the
scheduler and schedutil when looking for the overall CPU utilization
due to FAIR tasks.
For this reason, the estimated utilization of a root cfs_rq is simply
defined as:
util_est(cfs_rq) = max(cfs_rq::util_avg, cfs_rq::util_est::enqueued)
where:
cfs_rq::util_est::enqueued = sum(_task_util_est(task))
for each RUNNABLE task on that root cfs_rq
It's worth noting that the estimated utilization is tracked only for
objects of interests, specifically:
- Tasks: to better support tasks placement decisions
- root cfs_rqs: to better support both tasks placement decisions as
well as frequencies selection
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@android.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: http://lkml.kernel.org/r/20180309095245.11071-2-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
||
|
Ingo Molnar
|
10c18c44a6 |
Merge branch 'linus' into sched/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Linus Torvalds
|
1b5f3ba415 |
Merge branch 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo: "Two commits to fix the following subtle cgroup2 behavior bugs: - cpu.max was rejecting config when it shouldn't - thread mode enable was allowed when it shouldn't" * 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix rule checking for threaded mode switching sched, cgroup: Don't reject lower cpu.max on ancestors |
||
|
gaurav jindal
|
d17067e448 |
sched/completions: Use bool in try_wait_for_completion()
Since the return type of the function is bool, the internal 'ret' variable should be bool too. Signed-off-by: Gaurav Jindal<gauravjindal1104@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180221125407.GA14292@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Vincent Guittot
|
31e77c93e4 |
sched/fair: Update blocked load when newly idle
When NEWLY_IDLE load balance is not triggered, we might need to update the blocked load anyway. We can kick an ilb so an idle CPU will take care of updating blocked load or we can try to update them locally before entering idle. In the latter case, we reuse part of the nohz_idle_balance. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: brendan.jackman@arm.com Cc: dietmar.eggemann@arm.com Cc: morten.rasmussen@foss.arm.com Cc: valentin.schneider@arm.com Link: http://lkml.kernel.org/r/1518622006-16089-4-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Peter Zijlstra
|
47ea54121e |
sched/fair: Move idle_balance()
We're going to want to call nohz_idle_balance() or parts thereof from idle_balance(). Since we already have a forward declaration of idle_balance() move it down such that it's below nohz_idle_balance() avoiding the need for a forward declaration for that. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Peter Zijlstra
|
dd707247ab |
sched/nohz: Merge CONFIG_NO_HZ_COMMON blocks
Now that we have two back-to-back NO_HZ_COMMON blocks, merge them. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |