This is a very big update for the core since Morimoto-san has been
rather busy continuing his refactorings to clean up a lot of the cruft
that we have accumilated over the years. We've also gained several new
drivers, including initial (but still not complete) parts of the Intel
SoundWire support.
- Lots of refactorings to modernize the code from Morimoto-san.
- Conversion of SND_SOC_ALL_CODECS to use imply from Geert Uytterhoeven.
- Continued refactoring and fixing of the Intel support.
- Soundwire and more advanced clocking support for Realtek RT5682.
- Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom
DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563 and
TLV320ADCX140.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl6B03sTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0Jm5B/4pb6Hz1ifM+ikR4qB7BOdm/UGzxWlD
Mng+qN3kh6Tx+x8/xnQRmfOnhFoKnDSTnlxcDr6ujAtz3bH+CKXbo2jjfvmagQrW
j87tYGdh6T38E6mf6543Eth3zJGphZYUY70REXt0HsaQ8bA912nrs5H8LTFiD2i+
lBJd/MmlCYL3gb/ftN9dpTfYYdxLy9HH9j5tR5zpLN3AD3Hew9jHqqX+ioAk+6lA
Nisbx5grP10pWFklYXyJlUFQOqMOYMtPMblLRA9bjqcEtL3quIXPXKkPNtTh+0Kf
5t7Q39RtVXJAk0DcatjMJUGAGQyM9r5g1Nk8WLB1LLv+NfLcO6cUpLAc
=+z/q
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.7
This is a very big update for the core since Morimoto-san has been
rather busy continuing his refactorings to clean up a lot of the cruft
that we have accumilated over the years. We've also gained several new
drivers, including initial (but still not complete) parts of the Intel
SoundWire support.
- Lots of refactorings to modernize the code from Morimoto-san.
- Conversion of SND_SOC_ALL_CODECS to use imply from Geert Uytterhoeven.
- Continued refactoring and fixing of the Intel support.
- Soundwire and more advanced clocking support for Realtek RT5682.
- Support for amlogic GX, Meson 8, Meson 8B and T9015 DAC, Broadcom
DSL/PON, Ingenic JZ4760 and JZ4770, Realtek RL6231, and TI TAS2563 and
TLV320ADCX140.
On the Lenovo X1C7 machines, after we plug the headset, the rt_resume()
and rt_suspend() of the codec driver will be called periodically, the
driver can't stay in the rt_suspend state even users doen't use the
sound card.
Through debugging, I found when running rt_suspend(), it will call
alc225_shutup(), in this function, it will change 3k pull down control
by alc_update_coef_idx(codec, 0x4a, 0, 3 << 10), this will trigger a
fake key event and that event will resume the codec, when codec
suspend agin, it will trigger the fake key event one more time, this
process will repeat.
If disable the key event before changing the pull down control, it
will not trigger fake key event. It also needs to restore the pull
down control and re-enable the key event, otherwise the system can't
get key event when codec is in rt_suspend state.
Also move some functions ahead of alc225_shutup(), this can save the
function declaration.
Fixes: 76f7dec08f (ALSA: hda/realtek - Add Headset Button supported for ThinkPad X1)
Cc: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200329082018.20486-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If SND_HDA_CODEC_CA0132 is enabled, the DSP support should be enabled as
well. Disabled DSP support leads to a hanging alsa system and no sound
output on the card otherwise. Tested on:
06:00.0 Audio device: Creative Labs Sound Core3D [Sound Blaster Recon3D / Z-Series] (rev 01)
Signed-off-by: Rouven Czerwinski <rouven@czerwinskis.de>
Link: https://lore.kernel.org/r/20200329053710.4276-1-r.czerwinski@pengutronix.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To handle multiple hardware combinations, this patchset suggests a
single machine driver which will create and initialize dailinks
dynamically. This allows us to support new configurations easily, as
shown with the TigerLake rt5682 example.
Each configuration updates the card component string, and UCM can test
for the presence of components to configure them as needed.
Since we use a single the machine driver name, all previous ACPI
tables need to be updated. That should have no impact since the
machine drivers listed at the time were not upstreamed and are no
longer maintained.
Naveen Manohar (2):
ASoC: Intel: common: add match table for TGL RT5682 SoundWire driver
ASoC: Intel: sof_sdw: Add Volteer support with RT5682 SNDW helper
function
Pierre-Louis Bossart (1):
ASoC: Intel: boards: add sof_sdw machine driver
Rander Wang (1):
ASoC: Intel: soc-acpi: update topology and driver name for SoundWire
platforms
sound/soc/intel/boards/Kconfig | 24 +
sound/soc/intel/boards/Makefile | 8 +-
sound/soc/intel/boards/sof_sdw.c | 962 ++++++++++++++++++
sound/soc/intel/boards/sof_sdw_common.h | 114 +++
sound/soc/intel/boards/sof_sdw_dmic.c | 42 +
sound/soc/intel/boards/sof_sdw_hdmi.c | 97 ++
sound/soc/intel/boards/sof_sdw_rt1308.c | 151 +++
sound/soc/intel/boards/sof_sdw_rt5682.c | 126 +++
sound/soc/intel/boards/sof_sdw_rt700.c | 125 +++
sound/soc/intel/boards/sof_sdw_rt711.c | 156 +++
sound/soc/intel/boards/sof_sdw_rt715.c | 42 +
.../intel/common/soc-acpi-intel-cml-match.c | 24 +-
.../intel/common/soc-acpi-intel-icl-match.c | 6 +-
.../intel/common/soc-acpi-intel-tgl-match.c | 30 +-
14 files changed, 1896 insertions(+), 11 deletions(-)
create mode 100644 sound/soc/intel/boards/sof_sdw.c
create mode 100644 sound/soc/intel/boards/sof_sdw_common.h
create mode 100644 sound/soc/intel/boards/sof_sdw_dmic.c
create mode 100644 sound/soc/intel/boards/sof_sdw_hdmi.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt1308.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt5682.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt700.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt711.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt715.c
--
2.20.1
There are a couple of statements that are not indented correctly,
add in the missing tab and break the lines to address a checkpatch
warning.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200327141429.269191-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for Google Volteer device. As per new unified soundwire machine
driver, add rt5682-sdw helper function, which configures codec to Link0.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Link: https://lore.kernel.org/r/20200325220746.29601-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This machine driver provides support for different configurations:
RT700, RT711, RT1308 (1x and 2x, I2S or SoundWire mode), and RT715
CometLake, Icelake, TigerLake.
PDM digital microphones
HDMI
To avoid introducing one driver per configuration, this common machine
driver relies on platform-specific information, tables and quirks to
dynamically create the relevant dailinks.
Unlike a lot of machine drivers, we use different DAI links for
SoundWire capture and playback since the Cadence PDIs can do capture
OR playback, not both simultaneously.
For each configuration, the card component string is updated so that UCM
can select the relevant parts.
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200325220746.29601-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update topology and reflect change to unified machine driver for SoundWire.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325220746.29601-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patchset provides the support for SoundWire support on Intel
CometLake, IcelLake and TigerLake RVP platforms and form-factor
devices to be released 'soon'.
The bulk of the code is about detecting a valid SoundWire
configuration from ACPI, and implementing the interfaces suggested in
'[PATCH 0/8] soundwire: remove platform devices, add SOF interfaces'
for interrupts, PCI wakes and clock-stop configurations.
Since that SoundWire series will not be in 5.7, the build support for
SOF w/ SoundWire is not provided for now, and fall-back functions will
be used. This code is tested on a daily basis in the SOF tree and is
not expected to change in significant ways.
Changes since v2:
Corrected error in ACPI table (thanks Amadeusz)
Added patch 11 to add reset cycle required on some SoundWire platforms
Bard Liao (1):
ASoC: SOF: Intel: hda: merge IPC, stream and SoundWire interrupt
handlers
Pierre-Louis Bossart (8):
ASoC: soc-acpi: expand description of _ADR-based devices
ASoC: SOF: Intel: add SoundWire configuration interface
ASoC: SOF: IPC: dai-intel: move ALH declarations in header file
ASoC: SOF: Intel: hda: add SoundWire stream config/free callbacks
ASoC: SOF: Intel: hda: initial SoundWire machine driver autodetect
ASoC: SOF: Intel: hda: disable SoundWire interrupts on suspend
ASoC: SOF: Intel: hda: add parameter to control SoundWire clock stop
quirks
ASoC: SOF: Intel: hda-ctrl: add reset cycle before parsing
capabilities
Rander Wang (2):
ASoC: SOF: Intel: hda: add WAKEEN interrupt support for SoundWire
Asoc: SOF: Intel: hda: check SoundWire wakeen interrupt in irq thread
include/sound/soc-acpi.h | 39 +-
include/sound/sof/dai-intel.h | 18 +-
.../intel/common/soc-acpi-intel-cml-match.c | 87 +++-
.../intel/common/soc-acpi-intel-icl-match.c | 97 ++++-
.../intel/common/soc-acpi-intel-tgl-match.c | 49 ++-
sound/soc/sof/intel/hda-ctrl.c | 25 +-
sound/soc/sof/intel/hda-dsp.c | 2 +
sound/soc/sof/intel/hda-loader.c | 31 ++
sound/soc/sof/intel/hda.c | 400 ++++++++++++++++++
sound/soc/sof/intel/hda.h | 66 +++
10 files changed, 750 insertions(+), 64 deletions(-)
--
2.20.1
The SoundWire mode doesn't need the DAI clocks.
Therefore, the DAI clock registry moves to I2S mode case.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200327073849.18291-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If pci device is in D0, wakeen interrupt will be
aggregated at cAVS level as interrupt. This commit
check the wakeen status and process it in irq thread
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a SoundWire link is in clock stop state, a Slave device may wake
up the Master for some events such as jack detection. The WAKEEN
interrupt will be triggered and processed by the audio pci device.
If audio device is in D3, the interrupt will be routed to PME, or
aggregated at cAVS level as interrupt when audio device is in D0. This
patch only supports D3 case, where the audio pci device will be
resumed by a PME event and the WAKEEN interrupt will be processed
after audio pci device is powered up and ROM is initialized
successfully.
The WAKEEN handling is only enabled after the first boot due to
dependencies on a shim_lock mutex being initialized.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have a single irq handler for SOF interrupts. We can further merge
SoundWire ones to completely remove MSI interrupts handling issues
leading to timeouts.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Doing this avoid conflicts and errors reported on the bus.
The interrupts are only re-enabled on resume after the firmware is
downloaded, so the behavior is not fully symmetric
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For now we have a limited number of machine driver configurations, and
we can detect them based on the link configuration returned after
checking hardware and firmware (BIOS) configurations.
The link configuration is checked with a link_mask as well as a list
of _ADR descriptors for each link.
There is a chance that in extreme cases where the BIOS contains too
much information we would need to detect which Slave devices actually
report as 'attached'. This would be more accurate than static
table-based solutions, but it also introduces timing dependencies
since we don't know when those devices might become attached, so will
only be only be looked at if we see limitations with static methods
and the usual quirks based e.g. on DMI information.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These callbacks are invoked when a matching hw_params/hw_free() DAI
operation takes place, and will result in IPC operations with the SOF
firmware.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the SoundWire core supports the multi-step initialization,
call the relevant APIs.
The actual hardware enablement can be done in two places, ideally we'd
want to startup the SoundWire IP as soon as possible (while still
taking power rail dependencies into account)
However when suspend/resume is implemented, the DSP device will be
resumed first, and only when the DSP firmware is downloaded/booted
would the SoundWire child devices be resumed, so there are only
marginal benefits in starting the IP earlier for the first probe.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For SoundWire, we need to know if endpoints needs to be 'aggregated'
(MIPI parlance, meaning logically grouped), e.g. when two speaker
amplifiers need to be handled as a single logical output.
We don't necessarily have the information at the firmware (BIOS)
level, so add a notion of endpoints and specify if a device/endpoint
is part of a group, with a position.
This may be expanded in future solutions, for now only provide a group
and position information.
Since we modify the header file, change all existing upstream tables
as well to avoid breaking compilation/bisect.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The system in question uses ALC285, and it uses GPIO 0x04 to control its
mute LED.
The mic mute LED can be controlled by GPIO 0x01, however the system uses
DMIC so we should use that to control mic mute LED.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200327044626.29582-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When two (or more) amplifiers are on the same link, the integrator may:
a) assign dedicated slots for each of the amplifiers.
b) provide the same configuration to all amplifiers, and rely on
additional controls/processing in the amplifier to generate different
outputs.
case a) was the initial direction for SoundWire and is required for
amplifiers with limited capabilities, but to deal with orientation or
'posture' changes it's easier to implement case b) when the amplifier
can deal with multiple channels.
This patchset suggest the use of the set_tdm_slot() API to define
which of the channels will be consumed by what amplifiers. This maps
well with SoundWire's 'ChannelEnable' registers. The notion of
slot_width is however irrelevant here and ignored, and SoundWire ports
are typically single direction, so only one of the two masks shall be
used.
Pierre-Louis Bossart (2):
ASoC: rt1308-sdw: add set_tdm_slot() support
ASoC: rt1308-sdw: use slot and rx_mask to configure stream
sound/soc/codecs/rt1308-sdw.c | 38 +++++++++++++++++++++++++++++++----
sound/soc/codecs/rt1308-sdw.h | 2 ++
2 files changed, 36 insertions(+), 4 deletions(-)
--
2.20.1
The AC'97 based PXA machines currently don't build reliably as they don't
ensure that an AC'97 bus is built, causing at least eseries_pxa_defconfig
to fail to build. Add selects to fix this.
Reported-by: KernelCI <bot@kernelci.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200326180116.21375-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
regmap needs to be selected by users which for machine drivers that select
AC'97 CODEC drivers means that we need to also select regmap to ensure that
the CODEC driver will build if nothing else enables regmap as is likely for
such systems.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20200326151053.40806-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If the DAI was configured with a set_tdm_slots() call, use the information.
A platform or machine driver may configure each amplifier to extract
different bitSlots from the frame, or extract the same data and use
processing to generate the relevant output. The latter case is easier
to handle in case of orientation changes.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325212905.28145-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Further align HDA init sequence to the legacy non-DSP HDA driver by
calling snd_hdac_set_codec_wakeup() during the chip init sequence.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200325211233.27394-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The misc clock gating (MISCBDCGE) is disabled for controller reset and
reenabled once reset is complete.
Fix the case when error happens during reset, and clock gating is
left disabled. The clock gating should be reenabled also in this case.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200325211233.27394-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the VirtIO case the sof_pcm_open() function isn't called on the
host during guest streaming, which then leaves "work" structures
uninitialised. However it is then used to handle position update
messages from the DSP. Move their initialisation to immediately after
allocation of the containing structure.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200325211233.27394-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use for_each_pcm_streams() to enumerate streams in sof_dai_load()
instead of doing that manually.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200325211233.27394-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Improve the DSP power state logs with the state names
instead of values.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325211233.27394-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update tgl mach table with: Maxim98373 Amp and ALC5682 hp codec.
Both of the codecs are on I2S bus.
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325213245.28247-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch does the below:
1. Adds the driver data and updates quirk info for TGL
with Max98373 speaker amp and ALC5682 headset codec.
2. Added max98373 speaker related code to common file for re-use.
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325213245.28247-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add "Spk Switch" and associated widget, route to max98360a
speaker amp for power saving, also remove the speaker_amp_init()
callback with complete separated tables for max98373 and max98360a.
Signed-off-by: Bhat, Uday M <uday.m.bhat@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Link: https://lore.kernel.org/r/20200325213245.28247-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Without the dynamic flag to allow runtime routing, the card cannot
probe on chromebooks because SOF is constantly waiting for the link.
Adding flag back to allow upstream kernels to work on rt5682 based
chromebooks since SOF can now ignore the hard coded front end.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325213245.28247-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The USB-audio driver may call snd_card_register() multiple times as
its probe function is per USB interface while some USB-audio devices
may provide multiple interfaces to assign different streams although
they belong to the same device. This works in most cases but the
registration is racy, hence it may miss the device recognition,
e.g. PA doesn't see certain devices when hotplugged.
The recent addition of the delayed registration quirk allows to sync
the registration at the last known interface, and the previous commit
added a new module option to allow the dynamic setup for that
purpose.
Now, this patch tries to find out and notifies for such devices that
require the delayed registration. It shows a message like:
Found post-registration device assignment: 1234abcd:02
If you hit this message, you can pass delayed_register module option
like:
snd_usb_audio.delayed_register=1234abcd:02
by just copying the last shown entry. If this works, it can be added
statically in the quirk list, registration_quirks[] found at the end
of sound/usb/quirks.c.
Link: https://lore.kernel.org/r/20200325103322.2508-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a new option for specifying the quirk for delayed registration of
the certain device. A list of devices can be passed in a form
ID:IFACE,ID:IFACE,ID:IFACE,....
where ID is the 32bit hex number combo of vendor and device IDs and
IFACE is the interface number to trigger the register.
When a matching device is probed, the card registration is delayed
until the given interface is probed. It's needed for syncing the
registration until the last interface when multiple interfaces are
provided for the same card.
Link: https://lore.kernel.org/r/20200325103322.2508-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A slight refactoring of the registration quirk code. Now it uses the
table lookup for easy additions in future. Also the return type was
changed to bool, and got a few more comments.
Link: https://lore.kernel.org/r/20200325103322.2508-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Overlapping header include additions in macsec.c
A bug fix in 'net' overlapping with the removal of 'version'
string in ena_netdev.c
Overlapping test additions in selftests Makefile
Overlapping PCI ID table adjustments in iwlwifi driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
The signed 1 bit bitfields should be unsigned, so make them unsigned.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20200325132913.110115-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recent series of patches targeting broadwell boards, while enabling
SOF, changed behavior for non-SOF solutions. In essence replacing
platform 'dummy' with actual 'platform' causes redundant stream
initialization to occur during audio start. hw_params for haswell-pcm
destroys initial stream right after its creation - only to recreate it
again from proceed from there.
While harmless so far, this flow isn't right and should be corrected.
The actual need for dummy components for SSP0 link is questionable but
that issue is subject for another series.
Fixes: a40acc6bfc ("ASoC: Intel: bdw-rt5650: change cpu_dai and platform components for SOF")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325131611.545-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recent series of patches targeting broadwell boards, while enabling
SOF, changed behavior for non-SOF solutions. In essence replacing
platform 'dummy' with actual 'platform' causes redundant stream
initialization to occur during audio start. hw_params for haswell-pcm
destroys initial stream right after its creation - only to recreate it
again from proceed from there.
While harmless so far, this flow isn't right and should be corrected.
The actual need for dummy components for SSP0 link is questionable but
that issue is subject for another series.
Fixes: 4865bde187 ("ASoC: Intel: bdw-rt5677: change cpu_dai and platform components for SOF")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325131611.545-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recent series of patches targeting broadwell boards, while enabling
SOF, changed behavior for non-SOF solutions. In essence replacing
platform 'dummy' with actual 'platform' causes redundant stream
initialization to occur during audio start. hw_params for haswell-pcm
destroys initial stream right after its creation - only to recreate it
again from proceed from there.
While harmless so far, this flow isn't correct and should be corrected.
The actual need for dummy components for SSP0 link is questionable but
that issue is subject for another series.
Link to first message in conversation:
https://lkml.org/lkml/2020/3/18/54
Fixes: 64df6afa0d ("ASoC: Intel: broadwell: change cpu_dai and platform components for SOF")
Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325131611.545-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SPDX-License-Identifier shall not be suffixed with anything further.
This makes ./scripts/spdxcheck.py complain:
sound/soc/codecs/mt6660.c: 1:36 Invalid token: //
Clean up SPDX-License-Identifier line to make spdxcheck.py happy.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some .gitignore files have comments like "Generated files",
"Ignore generated files" at the header part, but they are
too obvious.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The new macro set has a consistent namespace and uses C99 initializers
instead of the grufty C89 ones.
Get rid the of the local macro wrappers for consistency.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20200320131510.594671507@linutronix.de
Before the JZ4770, the playback and capture sampling rates had to match.
The JZ4770 supports independent sampling rates for both.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200306222931.39664-6-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The change of offset for the {rx,tx}_threshold fields in the conf
register predates the JZ4780, and was first introduced in the JZ4760.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200306222931.39664-5-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/wm8974.c:200:38: warning:
wm8974_aux_boost_controls defined but not used [-Wunused-const-variable=]
sound/soc/codecs/wm8974.c:204:38: warning:
wm8974_mic_boost_controls defined but not used [-Wunused-const-variable=]
commit 8a123ee2a4 ("ASoC: WM8974 DAPM cleanups")
left behind this, remove them.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200324070615.16248-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the tas2562 datasheet,the bits[5:1] represents the amp_level value.
So to set the amp_level value correctly,the shift value should be set to 1.
Signed-off-by: Jonghwan Choi <charlie.jh@kakaocorp.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200319140043.GA6688@jhbirdchoi-MS-7B79
Signed-off-by: Mark Brown <broonie@kernel.org>
Hello,
This small series adds audio route for built-in microphone on NVIDIA Tegra
boards that use WM8903 CODEC. In particular this is needed in order to unmute
internal microphone on Acer A500 tablet device. I'm planning to send out the
device tree for the A500 for 5.8, so will be nice to get the microphone
sorted out. Please review and apply, thanks in advance.
Dmitry Osipenko (2):
dt-bindings: sound: tegra-wm8903: Document built-in microphone audio
source
ASoC: tegra: tegra_wm8903: Support DAPM events for built-in microphone
.../sound/nvidia,tegra-audio-wm8903.txt | 1 +
sound/soc/tegra/tegra_wm8903.c | 18 ++++++++++++++++++
2 files changed, 19 insertions(+)
--
2.25.1
The patch adds a property for DMIC clock rate (hz) and changes the
default to the common optimize DMIC clock rate.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200323082547.7898-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SPDX-License-Identifier shall not be suffixed with anything further.
This makes ./scripts/spdxcheck.py complain:
sound/soc/codecs/mt6660.c: 1:36 Invalid token: //
Clean up SPDX-License-Identifier line to make spdxcheck.py happy.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20200321114022.8545-1-lukas.bulwahn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The enable-GPIO needs to be toggled on a DAPM event in order to turn
microphone ON/OFF, otherwise microphone won't work.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200320205504.30466-3-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A new small helper to get the current state of the device registration
for the given object. It'll be used for USB-audio driver to check the
delayed device registrations.
Link: https://lore.kernel.org/r/20200323170643.19181-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now CPU/Codec DAIs are alias for dais.
Thus, we can directly use for_each_rtd_dais() macro
for soc_dai_pcm_new().
This patch merge CPU/Codec for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87r1xsolen.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now we can use for_each_rtd_dais().
Let's use it instead of for_each_rtd_cpu/codec_dais().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87sgi8olet.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now we can use for_each_rtd_dais().
Let's use it instead of for_each_rtd_cpu/codec_dais().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87tv2ooley.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now we can use for_each_rtd_dais().
Let's use it instead of for_each_rtd_cpu/codec_dais().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87v9n4olf4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC is currently categorizing CPU/Codec DAIs,
and it works well.
But modern devices require more complex connections,
for example Codec to Codec, etc, and future devices will
enable to more complex connections.
Because of these background, CPU/Codec DAIs categorizing is
no longer good much to modern device.
Currently, rtd has both CPU/Codec DAIs pointer.
rtd->cpu_dais = [][][][][][][][][]
rtd->codec_dais = [][][][][][][][][]
This patch merges these into DAIs pointer.
rtd->dais = [][][][][][][][][][][][][][][][][][]
^cpu_dais ^codec_dais
|--- num_cpus ---|--- num_codecs --|
Then, we can merge for_each_rtd_cpu/codec_dais() from this patch.
- for_each_rtd_cpu_dais() {
- ...
- }
- for_each_rtd_codec_dais() {
- ...
- }
+ for_each_rtd_dais() {
+ ...
+ }
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87wo7kolfa.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I have a system which has an EVGA X99 Classified motherboard. The pin
assignments for the HD Audio controller are not correct under Linux.
Windows 10 works fine and informs me that it's using the Recon3Di
driver, and on Linux, `cat
/sys/class/sound/card0/device/subsystem_{vendor,device}` yields
0x3842
0x1038
This patch adds a corresponding entry to the quirk list.
Signed-off-by: Geoffrey Allott <geoffrey@allott.email>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/a6cd56b678c00ce2db3685e4278919f2584f8244.camel@allott.email
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patchset corrects a rebind issue on STM32 SPDIFRX and I2S drivers.
The same correction has already been applied for SAI driver:
0d6defc7e0 ("ASoC: stm32: sai: manage rebind issue")
The commit e894efef9a ("ASoC: core: add support to card rebind")
allows to rebind the sound card after a rebind of one of its component.
With this commit, the sound card is actually rebound,
but may be no more functional.
The following problems have been seen on STM32 drivers.
1) DMA channel is not requested:
With the sound card rebind the simplified call sequence is:
probe
snd_soc_register_component
snd_soc_try_rebind_card
snd_soc_instantiate_card
devm_snd_dmaengine_pcm_register
The problem occurs because the pcm must be registered,
before snd_soc_instantiate_card() is called.
Modify the driver, to change the call sequence as follows:
probe
devm_snd_dmaengine_pcm_register
snd_soc_register_component
snd_soc_try_rebind_card
2) DMA channel is not released:
dma_release_channel() is not called when
devm_dmaengine_pcm_release() is executed.
This occurs because SND_DMAENGINE_PCM_DRV_NAME component,
has already been released through devm_component_release().
devm_dmaengine_pcm_release() should be called before
devm_component_release() to avoid this problem.
Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component()
explicitly from the driver, to have the right sequence.
Olivier Moysan (3):
ASoC: stm32: spdifrx: fix regmap status check
ASoC: stm32: spdifrx: manage rebind issue
ASoC: stm32: i2s: manage rebind issue
sound/soc/stm/stm32_i2s.c | 40 ++++++++++++++++------
sound/soc/stm/stm32_spdifrx.c | 64 +++++++++++++++++++----------------
2 files changed, 63 insertions(+), 41 deletions(-)
--
2.17.1
Recent addition of SoundWire stream state-machine checks in linux-next
have shown an existing issue with handling soundwire streams in codec drivers.
In general soundwire stream prepare/enable/disable can be called from either
codec/machine/controller driver. However calling it in codec driver means
that if multiple instances(Left/Right speakers) of the same codec is
connected to the same stream then it will endup calling stream
prepare/enable/disable more than once. This will mess up the stream
state-machine checks in the soundwire core.
Moving this stream handling to machine driver would fix this issue
and also allow board/platform specfic power sequencing.
Changes since v1:
- removed false error check while setting sruntime.
Srinivas Kandagatla (2):
ASoC: qcom: sdm845: handle soundwire stream
ASoC: codecs: wsa881x: remove soundwire stream handling
sound/soc/codecs/wsa881x.c | 44 +------------------------
sound/soc/qcom/Kconfig | 2 +-
sound/soc/qcom/sdm845.c | 67 ++++++++++++++++++++++++++++++++++++++
3 files changed, 69 insertions(+), 44 deletions(-)
--
2.21.0
In existing setup WSA881x codec handles soundwire stream,
however DB845c and other machines based on SDM845c have 2
instances for WSA881x codec. This will force soundwire stream
to be prepared/enabled twice or multiple times.
Handling SoundWire Stream in machine driver would fix this issue.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200317151233.8763-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There could be multiple instances of this codec on any platform,
so handling stream directly in this codec driver can lead to
multiple calls to prepare/enable/disable on the same SoundWire stream.
Move this stream handling to machine driver to fix this issue.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200317151233.8763-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit e894efef9a ("ASoC: core: add support to card rebind")
allows to rebind the sound card after a rebind of one of its component.
With this commit, the sound card is actually rebound,
but may be no more functional.
Corrections:
- Call snd_dmaengine_pcm_register() before snd_soc_register_component().
- Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component()
explicitly from I2S driver.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200318144125.9163-4-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit e894efef9a ("ASoC: core: add support to card rebind")
allows to rebind the sound card after a rebind of one of its component.
With this commit, the sound card is actually rebound,
but may be no more functional.
Corrections:
- Call snd_dmaengine_pcm_register() before snd_soc_register_component().
- Call snd_dmaengine_pcm_unregister() and snd_soc_unregister_component()
explicitly from SPDFIRX driver.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200318144125.9163-3-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cycle time of FIFO clock should increase 2 times to avoid
the random recording noise issue.
This setting could apply to all known situations in i2s mode.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200317073308.11572-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A headset on the desktop like Acer N50-600 does not work, until quirk
ALC662_FIXUP_ACER_NITRO_HEADSET_MODE is applied.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200317082806.73194-3-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Qualcomm DSPs also supports the ALAC and APE decoders, so add support
for these and convert the snd_codec_params to qdsp format.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-9-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm DSPs expect ALAC and APE configs to be send for decoders,
so add the API to program the respective config to the DSP.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-8-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm DSPs also supports the wma decoder, so add support for wma
decoder and convert the snd_codec_params to qdsp format.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-6-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Qualcomm DSPs expect wma v9 and wma v10 configs to be set for wma
decoders, so add the API to program the respective wma config to the DSP
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-5-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Codec profile is required to be passed for WMA codecs so that we know
the codec profile present and tell DSP accordingly, so update this API
to pass the codec profile as argument
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200316055221.1944464-4-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The virmidi driver handles sysex event exceptionally in a short-cut
snd_seq_dump_var_event() call, but this missed the reset of the
running status. As a result, it may lead to an incomplete command
right after the sysex when an event with the same running status was
queued.
Fix it by clearing the running status properly via alling
snd_midi_event_reset_decode() for that code path.
Reported-by: Andreas Steinmetz <ast@domdv.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de
Link: https://lore.kernel.org/r/20200316090506.23966-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Create a quirk that allows special processing and/or
skipping the call to snd_card_register.
For HyperX AMP, which uses two interfaces, but only has
a capture stream in the second, this allows the capture
stream to merge with the first PCM.
Signed-off-by: Chris Wulff <crwulff@gmail.com>
Link: https://lore.kernel.org/r/20200314165449.4086-3-crwulff@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the USB interface of the mixer that the control
was created on instead of the default control interface.
This fixes the Kingston HyperX AMP (0951:16d8) which has
controls on two interfaces.
Signed-off-by: Chris Wulff <crwulff@gmail.com>
Link: https://lore.kernel.org/r/20200314165449.4086-2-crwulff@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds Broadcom DSL/PON SoC audio driver
with Whistler I2S block. The SoC supported by this
patch are BCM63158B0,BCM63178 and BCM47622/6755
Signed-off-by: Kevin Li <kevin-ke.li@broadcom.com>
Link: https://lore.kernel.org/r/20200312223242.2843-2-kevin-ke.li@broadcom.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We've removed GFP_ATOMIC in all machine drivers and somehow this keeps
coming back due to copy-paste. Move to GFP_KERNEL.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200312194859.4051-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Maxim MAX98360A plug-and-play Class-D amplifier support on SSP1,
new card ID is sofda7219max98360a, name sof-da7219max98360a.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312194859.4051-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix a clumsy structure member dereference in all machine drivers.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312194859.4051-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Variables, used as loop iterators, don't need to be initialised.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312194859.4051-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To help user-space with HDMI codec driver transition, both
a kernel module parameter and a kernel option were initially
provided to configure default behaviour of SOF on Intel hardware
with commit 139c7febad ("ASoC: SOF: Intel: add support for
snd-hda-codec-hdmi").
As hdac-hdmi is already now lagging in features compared to
snd-hda-codec-hdmi, move ahead with the transition and remove
the build option to select between the two, and instead default
to snd-hda-codec-hdmi if it is enabled in kernel build.
The old behaviour of using hdac-hdmi driver can still be forced
via the kernel module parameter.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312194859.4051-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make HDMI optional for APL and later platforms. If no HDMI codec
is found on the HDA bus, the graphics side driver is missing or
correct codec driver is not part of kernel build, codec_mask
reflects this and HDMI is disabled. The DSP topology will still
have the links for HDMI, so connect these to dummy codec to avoid
failures in topology loading.
This change also fixes a kernel oops that was triggered if
sof_pcm512x was used with SOF configured to use hdac-hdmi (can be
done via "use_common_hdmi=0" or by selecting
CONFIG_SND_SOC_SOF_HDA_COMMON_HDMI_CODEC=n). This is not a supported
configuration.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312194859.4051-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Having a reverse dependency to a config that has its own additional
dependencies, is generally not recommended. And this applies to
select statements for SND_HDA_CODEC_HDMI, e.g. the case where SND_HDA
and SND_SOC_SOF_HDA are built as modules, but the machine driver is
built-in, leading to compile errors (reported as
i386-randconfig-e003-20200206).
Give up on trying to define different dependencies based on SOF/SST
selection, and simply add a "depends on" for SND_HDA_CODEC_HDMI. This
fixes the issue with randconfigs. Only downside is that SND_HDA_CODEC_HDMI
may be built unnecessarily in some cases, but this seems like the lesser
evil.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312194859.4051-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Having a reverse dependency to a config that has its own additional
dependencies, is generally not recommended. And this applies to
select statements for SND_HDA_CODEC_HDMI, e.g. the case where SND_HDA
and SND_SOC_SOF_HDA are built as modules, but the machine driver is
built-in, leading to compile errors (reported as
i386-randconfig-e003-20200206).
Give up on trying to define different dependencies based on SOF/SST
selection, and simply add a "depends on" for SND_HDA_CODEC_HDMI. This
fixes the issue with randconfigs. Only downside is that SND_HDA_CODEC_HDMI
may be built unnecessarily in some cases, but this seems like the lesser
evil.
Fixes: aa2b4a5 ('ASoC: Intel: boards: fix incorrect HDMI Kconfig dependency')
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312194859.4051-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend code from single cpu-dai to multi-dai
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312200622.24477-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDA_DSP_IPC_PURGE_FW IPC from ROM is already handled in
cl_dsp_init(), and it will never be received in the IRQ thread,
so the wait condition on this IPC will never be satisfied. The
wait before loading firmware is redundant and can be removed safely.
Signed-off-by: Amery Song <chao.song@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200312200622.24477-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDA_DSP_IPC_PURGE_FW IPC from ROM is already handled in
cl_dsp_init(), and as IPC IRQ is disabled at this stage, this
IPC will be never received in the IRQ thread. The function
hda_dsp_ipc_is_sof for filtering the ROM IPC can be removed
safely.
Signed-off-by: Amery Song <chao.song@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Keyon <yang.jie@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200312200622.24477-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This enum code, and what's more important, related structures is
unused in whole source code, so it shouldn't be kept.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312200622.24477-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_stream_valid() will check if the stream is valid by testing
stream->channels_min. So we do need the information in dai driver.
The stream name is not added since we want to sure
playback_widget/capture_widget will be created by topology.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200312200622.24477-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_hdac_codec_modalias() truncates the string to the given size and
returns its size, but it returned a wrong size from snprintf().
snprintf() returns the would-be-output size, not the actual size.
Use scnprintf() instead to return the correct size.
Link: https://lore.kernel.org/r/20200313130241.8970-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
show_pcm_class() returns obviously a short string that can't overflow
PAGE_SIZE. And even if it were to overflow, using snprintf() there is
just wrong, as it doesn't return the correct size.
So simplify with sprintf() instead.
Link: https://lore.kernel.org/r/20200313130223.8908-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snprintf() is a hard-to-use function, it's especially difficult to use
it for concatenating substrings in a buffer with a limited size.
Since snprintf() returns the would-be-output size, not the actual
size, the subsequent use of snprintf() may point to the incorrect
position.
Use scnprintf() instead for fixing such potential errors.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200313130334.9028-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Function soc_tplg_dbytes_create(), calls soc_tplg_init_kcontrol() to
perform additional driver specific initialization. While
soc_tplg_init_kcontrol() ensures that component is valid before invoking
ops->control_load, there is no such check at the end of
soc_tplg_dbytes_create() where list_add() is used.
Also in quite a few places, there is reference of tplg->comp->dapm or
tplg->comp->card, without any checks for tplg->comp.
In consequence of the above this may lead to referencing NULL pointer.
This allows for removal of now unnecessary checks.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200312122239.14489-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The return value checks in snd_pcm_plug_alloc() are covered with
snd_BUG_ON() macro that may trigger a kernel WARNING depending on the
kconfig. But since the error condition can be triggered by a weird
user space parameter passed to OSS layer, we shouldn't give the kernel
stack trace just for that. As it's a normal error condition, let's
remove snd_BUG_ON() macro usage there.
Reported-by: syzbot+2a59ee7a9831b264f45e@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200312155730.7520-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This makes DPCM runtime update functions available for external
calling. As an example, virtualised ASoC component drivers may need
to call these when managing shared DAPM routes that are used by more
than one driver (i.e. when host driver and guest drivers have a DAPM
path from guest PCM to host DAI where some parts are owned by host
driver and others by guest driver).
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200312095214.15126-3-guennadi.liakhovetski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently dpcm_prune_paths() has up to 4 nested condition and loop
levels, which forces the code to use flags for flow control.
Extracting widget status verification code from dpcm_prune_paths()
into a separate function simplifies the code.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200312095214.15126-2-guennadi.liakhovetski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
QDSP6 Frontend dais can be configured to work in rx or tx or both rx/tx mode,
however the default routing do not honour this DT configuration making sound
card fail to probe. FE dais are also not fully honouring device tree configuration.
Fix both of them.
Originally issue was reported by Vinod Koul
Srinivas Kandagatla (2):
ASoC: qdsp6: q6asm-dai: only enable dais from device tree
ASoC: qdsp6: q6routing: remove default routing
sound/soc/qcom/qdsp6/q6asm-dai.c | 30 +++++++++++++++++++++++-------
sound/soc/qcom/qdsp6/q6routing.c | 19 -------------------
2 files changed, 23 insertions(+), 26 deletions(-)
--
2.21.0
Field "substream" gets assigned during stream setup in
hda_dsp_pcm_hw_params() but it is never cleared afterwards during
cleanup procedure. Now, any non-pcm operation e.g.: compress can
mistakenly make use of that pointer as it's bypassing all
"if (s->substream)" checks.
Nulling the pointer during hw_free operation ensures no wild pointers
are left behind.
Fixes: cdae3b9a47aa ("ASoC: SOF: Intel: Add Intel specific HDA PCM operations")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200312120058.15057-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Frontend dais can be configured to rx or tx or both, however having default
routes without considering this configuration can lead to failures during
card probe as below for compress rx only case. These routing have to come
from sound card routing table in device tree.
"routing: ASoC: Failed to add route MM_UL1 -> direct -> MultiMedia1 Capture
msm-snd-sdm845 sound: ASoC: failed to instantiate card -19
"
Reported-by: Vinod Koul <vinod.koul@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200311180422.28363-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Existing code enables all the playback and capture dais even
if there is no device tree entry. This can lead to
un-necessary dais in the system which will never be used.
So honour whats specfied in device tree.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200311180422.28363-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In this function, the variable 'dev' is assigned to '&pdev->dev',
but in the following code, all the assignments to 'struce device'
are used '&pdev->dev' instead of 'dev',except 'zx_tdm->dev'.
So,the variable 'dev' in this function is redundant and can be
replaced by '&pdev->dev' as elsewhere.
Signed-off-by: tangbin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200311144646.11292-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sparse reports a warning at tscm_hwdep_read_locked()
warning: context imbalance in tscm_hwdep_read_locked() - unexpected unlock
The root cause is the missing annotation at tscm_hwdep_read_locked()
Add the missing __releases(&tscm->lock) annotation
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200311010908.42366-9-jbi.octave@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sparse reports a warning at tscm_hwdep_read_queue()
warning: context imbalance in tscm_hwdep_read_queue() - unexpected unlock
The root cause is the missing annotation at tscm_hwdep_read_queue()
Add the missing __releases(&tscm->lock) annotation
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200311010908.42366-8-jbi.octave@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
RT5682 can work in I2C or SoundWire mode, but the code will not
compile if I2C is not selected.
Reported-by: kbuild test robot <lkp@intel.com>
Pierre-Louis Bossart (3):
ASoC: rt5682: fix unmet dependencies
ASoC: rt5682: fix compilation issues without I2C
ASoC: rt5682-sdw: fix 'defined but not used' pm functions
sound/soc/codecs/Kconfig | 2 +-
sound/soc/codecs/rt5682-sdw.c | 4 ++--
sound/soc/codecs/rt5682.c | 10 ++++++++++
3 files changed, 13 insertions(+), 3 deletions(-)
--
2.20.1
This is re-applying the fix that went into 5.6 (commit 6c89ffea60)
as the changes were wiped out after merging the other code
refactoring. Basically the same changes, just replacing the
suspicious calls of snprintf() with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200310163625.10838-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Gcc reports the following warnings:
sound/soc/codecs/rt5682-sdw.c:286:12: warning: 'rt5682_dev_resume'
defined but not used [-Wunused-function]
static int rt5682_dev_resume(struct device *dev)
^~~~~~~~~~~~~~~~~
sound/soc/codecs/rt5682-sdw.c:273:12: warning: 'rt5682_dev_suspend'
defined but not used [-Wunused-function]
static int rt5682_dev_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~
Fix by adding maybe_unused as done for other SoundWire codecs
Fixes: 03f6fc6de9 ('ASoC: rt5682: Add the soundwire support')
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200310163509.14466-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5682 code can be used in I2C or SoundWire mode. When I2C is not
selected, we have the following issue:
WARNING: unmet direct dependencies detected for SND_SOC_RT5682
Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] &&
I2C [=n]
Selected by [m]:
- SND_SOC_RT5682_SDW [=m] && SOUND [=m] && !UML && SND [=m] &&
SND_SOC [=m] && SOUNDWIRE [=m]
Fix by adding SOUNDWIRE as a dependency.
Fixes: 03f6fc6de9 ('ASoC: rt5682: Add the soundwire support')
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200310163509.14466-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each purge request is sent by driver after master core is powered up and
unresetted but before it is unstalled. On unstall, ROM begins processing
the request and initializing environment for FW load. Host should await
ROM's ack before moving forward. Without doing so, ROM init poll may
start too early and false timeouts can occur.
Fixes: cb6a552846 ("ASoC: Intel: cnl: Add sst library functions for cnl platform")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to unconditional initial timeouts, firmware may fail to load during
its initialization. This issue cannot be resolved on driver side as it
is caused by external sources such as CSME but has to be accounted for
nonetheless.
Fixes: cb6a552846 ("ASoC: Intel: cnl: Add sst library functions for cnl platform")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some configurations expose no NHLT table at all within their
/sys/firmware/acpi/tables. To prevent NULL-dereference errors from
occurring, adjust probe flow and append additional safety checks in
functions involved in NHLT lifecycle.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow the recommendation set by hda_intel.c and enable HDMI/DP codec
wakeup during bus initialization procedure. Disable wakeup once init
completes.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With _reset_link removed from the probe sequence, codec_mask at the time
skl_find_hda_machine() is invoked will always be 0, so hda machine will
never be chosen. Rather than reorganizing boot flow, be permissive about
invalid mask. codec_mask will be set to proper value during probe_work -
before skl_codec_create() ever gets called.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Skylake driver does the controller init operation twice:
- first during probe (only to stop it just before scheduling probe_work)
- and during said probe_work where the actual correct sequence is
executed
To properly complete boot sequence when iDisp codec is present, bus
initialization has to be called only after _i915_init() finishes.
With additional _reset_list preceding _i915_init(), iDisp codec never
gets the chance to enumerate on the link. Remove the superfluous
initialization to address the issue.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200305145314.32579-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware API changes which introduced 'num_elems' param in several probe
structs such as sof_ipc_probe_dma_add_params also impacted getter for
both, DMA and probe points. All struct handlers except for
sof_ipc_probe_info_params have been updated. Align said handler too to
calculate payload size correctly.
Fixes: f3b433e469 ("ASoC: SOF: Implement Probe IPC API")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200309142124.29262-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To be more readable code, this patch adds
new for_each_card_widgets() macro, and replace existing code to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87r1y2goga.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To be more readable code, this patch adds
new for_each_card_dapms() macro, and replace existing code to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87sgiigogf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
v5.4 changes in soc-core tightened the checks on soc_dapm_add_routes,
which results in the ASoC card probe failing.
Introduce a flag to be set in machine drivers to prevent the probe
from stopping in case of incomplete topologies or missing routes. This
flag is for backwards compatibility only and shall not be used for
newer machine drivers.
Example with an HDaudio card with a bad topology:
[ 236.177898] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Failed to
add route iDisp1_out -> direct -> iDisp1 Tx
[ 236.177902] skl_hda_dsp_generic skl_hda_dsp_generic:
snd_soc_bind_card: snd_soc_dapm_add_routes failed: -19
with the disable_route_checks set:
[ 64.031657] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Failed to
add route iDisp1_out -> direct -> iDisp1 Tx
[ 64.031661] skl_hda_dsp_generic skl_hda_dsp_generic:
snd_soc_bind_card: disable_route_checks set, ignoring errors on
add_routes
Fixes: daa480bde6 ("ASoC: soc-core: tidyup for snd_soc_dapm_add_routes()")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200309192744.18380-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Both snd_pcm_plug_client_size() and snd_pcm_plug_slave_size() do the
almost same calculations of calling src_frames() and dst_frames() in
the chain, but just to the different directions with each other.
This patch simplifies those functions. Now they return -EINVAL for
the invalid direction, but practically seen, there is no functional
changes at all.
Link: https://lore.kernel.org/r/20200309185855.15693-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of passing an enum as match data, and checking its value in the
probe to register one or the other dai, pass a pointer to a struct
i2s_soc_info, which contains all the information relative to one SoC.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200306222931.39664-4-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Make the code cleaner by using a "struct device *dev" variable instead
of dereferencing it everytime from within the struct platform_device.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200306222931.39664-3-paul@crapouillou.net
Signed-off-by: Mark Brown <broonie@kernel.org>
TDM related settings for ACP registers in hw_params.
When TDM mode is enabled, Hw_params needs to read and write
from/to respective TX/RX (ACP_(I2S/BT)TDM_(TX/RX)FRMT) registers.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/1583751029-2850-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MIDI input event parser of the LINE6 driver may enter into an
endless loop when the unexpected data sequence is given, as it tries
to continue the secondary bytes without termination. Also, when the
input data is too short, the parser returns a negative error, while
the caller doesn't handle it properly. This would lead to the
unexpected behavior as well.
This patch addresses those issues by checking the return value
correctly and handling the one-byte event in the parser properly.
The bug was reported by syzkaller.
Reported-by: syzbot+cce32521ee0a824c21f7@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/000000000000033087059f8f8fa3@google.com
Link: https://lore.kernel.org/r/20200309095922.30269-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Each OSS PCM plugins allocate its internal buffer per pre-calculation
of the max buffer size through the chain of plugins (calling
src_frames and dst_frames callbacks). This works for most plugins,
but the rate plugin might behave incorrectly. The calculation in the
rate plugin involves with the fractional position, i.e. it may vary
depending on the input position. Since the buffer size
pre-calculation is always done with the offset zero, it may return a
shorter size than it might be; this may result in the out-of-bound
access as spotted by fuzzer.
This patch addresses those possible buffer overflow accesses by simply
setting the upper limit per the given buffer size for each plugin
before src_frames() and after dst_frames() calls.
Reported-by: syzbot+e1fe9f44fb8ecf4fb5dd@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/000000000000b25ea005a02bcf21@google.com
Link: https://lore.kernel.org/r/20200309082148.19855-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
More fixes that have arrived since the merge window, spread out all
over. There's a few things like the operation callback addition for
rt1015 and the meson reset addition which add small new bits of
functionality to fix non-working systems, they're all very small and for
parts of newly added functionality.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl5iebkTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0MR4B/wJq8zrpsPAA2jCoBfN0qMzrVBEt9QD
5oF/r36ZH5G6x0QZzyiwVOUbapNT1TVs51tw0S5esxJ+npkT2kgABPlIMYF2tgp6
rmLOaFEPC+Bgf/dNGIWLV21B+EZCHDxTz1zD7VjfaXLDPRop+sZg1VfXLR7IvXos
1VQLVx1y6vFJRr56EU5xQo1CAeFGB1x5K52aF4D90ALL7lYT6dt7m/soBmxImEpq
aZUCE6xwX8WMH4OX6sTfqOvB+g6q+DzshCP2+Fas/0OIQZQA9mmIKId+/xpb6QcY
A0AzMlSv49uAsBsa3CZmSingGVqL/PEMkCI4wvJPl/paQXUsMi9HYV0E
=YlPP
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.6-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.6
More fixes that have arrived since the merge window, spread out all
over. There's a few things like the operation callback addition for
rt1015 and the meson reset addition which add small new bits of
functionality to fix non-working systems, they're all very small and for
parts of newly added functionality.
slimbus addresses are 16 bit wide, masking page numbers
to wcd register at offset of 12 will limit the number for pages.
So it becomes impossible to write to page 0x10 registers.
Remove masking 0x800 (slimbus address range) from register address
and making use of window parameters in regmap config should fix it
and also will represent the registers exactly inline with Datasheet.
Remove this unnessary masking and make the registers be inline
with datasheet.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200306152633.25836-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi Mark
These are v2 resend of soc-pcm cleanup step5.
1) - 4) are rebased to latest for-5.7 branch.
5) - 6) are remaked of previous [6/8], [7/8] which were mistaken patch.
Kuninori Morimoto (6):
1) ASoC: soc-pcm: move dpcm_fe_dai_close()
2) ASoC: soc-pcm: add dpcm_fe_dai_cleanup()
3) ASoC: soc-pcm: use snd_soc_dai_get_pcm_stream() at dpcm_set_fe_runtime()
4) ASoC: soc-pcm: tidyup dulicate handing at dpcm_fe_dai_startup()
5) ASoC: soc-pcm: check DAI's activity more simply
6) ASoC: soc-pcm: Do Digital Mute for both CPU/Codec in same timing.
sound/soc/soc-pcm.c | 97 ++++++++++++++++++++++-----------------------
1 file changed, 47 insertions(+), 50 deletions(-)
--
2.17.1
