Add a redzone to our context image and check the HW does not write into
after a context save, to verify that we have the correct context size.
(This does vary with feature bits, so test with a live setup that should
match how we run userspace.)
v2: Check the redzone on every context unpin
v3: Use a kernel context to prevent loading garbage for ringbuffer
submission
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190817073711.5897-1-chris@chris-wilson.co.uk
We really need to have separate NOT_SUPPORTED state (for
lack of hardware support) and DISABLED state (to indicate
user decision) as we will have to take special steps even
if GuC firmware is now disabled but hardware exists and
could have been previously used.
v2: fix logic (Chris/CI)
v3: use proper check to avoid probe failure (CI)
v4: explain status transitions (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816205658.15020-1-michal.wajdeczko@intel.com
To remove the dependency between the GT headers and i915_reg.h, move the
definition of the engine IDs/classes to intel_engine_types.h
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816012343.36433-3-daniele.ceraolospurio@intel.com
If we only call process_csb() from the tasklet, though we lose the
ability to bypass ksoftirqd interrupt processing on direct submission
paths, we can push it out of the irq-off spinlock.
The penalty is that we then allow schedule_out to be called concurrently
with schedule_in requiring us to handle the usage count (baked into the
pointer itself) atomically.
As we do kick the tasklets (via local_bh_enable()) after our submission,
there is a possibility there to see if we can pull the local softirq
processing back from the ksoftirqd.
v2: Store the 'switch_priority_hint' on submission, so that we can
safely check during process_csb().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816171608.11760-1-chris@chris-wilson.co.uk
As every i915_active_request should be serialised by a dedicated lock,
i915_active consists of a tree of locks; one for each node. Markup up
the i915_active_request with what lock is supposed to be guarding it so
that we can verify that the serialised updated are indeed serialised.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816121000.8507-2-chris@chris-wilson.co.uk
We use timeline->mutex to protect modifications to
context->active_count, and the associated enable/disable callbacks.
Due to complications with engine-pm barrier there is a path where we used
a "superlock" to provide serialised protect and so could not
unconditionally assert with lockdep that it was always held. However,
we can mark the mutex as taken (noting that we may be nested underneath
ourselves) which means we can be reassured the right timeline->mutex is
always treated as held and let lockdep roam free.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816121000.8507-1-chris@chris-wilson.co.uk
While we need to know WOPCM size to do this sanity check, it has more to
do with FW than with WOPCM. Let's move the check to fetch phase, it's
not like WOPCM is going to grow in the meantime.
v2: rebased
v3: use __intel_uc_fw_get_upload_size (Daniele)
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jackie Li <yaodong.li@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190816105501.31020-2-michal.wajdeczko@intel.com
Forgo the struct_mutex requirement for request retirement as we have
been transitioning over to only using the timeline->mutex for
controlling the lifetime of a request on that timeline.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815205709.24285-4-chris@chris-wilson.co.uk
In preparation for removing struct_mutex from around context retirement,
we need to make timeline pinning and unpinning safe. Since multiple
engines/contexts can share a single timeline, we cannot rely on
borrowing the context mutex (otherwise we could state that the timeline
is only pinned/unpinned inside the context pin/unpin and so guarded by
it). However, we only perform a sequence of atomic operations inside the
timeline pin/unpin and the sequence of those operations is safe for a
concurrent unpin / pin, so we can relax the struct_mutex requirement.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815205709.24285-3-chris@chris-wilson.co.uk
Flush according to what gen11 expects when writing
breadcrumbs. As only the seqnowrite + flush differs
between engine and gens, enclose the footer to
helper.
v2: avoid problem of sane local naming by not using them
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815094929.358-1-mika.kuoppala@linux.intel.com
Add tile cache flushing for gen11. To relive us from the
burden of previous obsolete workarounds, make a dedicated
flush/invalidate callback for gen11.
To fortify an independent single flush, do post
sync op as there are indications that without it
we don't flush everything. This should also make this
callback more readily usable in tgl (see l3 fabric flush).
v2: whitespacing
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815083055.14132-1-mika.kuoppala@linux.intel.com
The engine->guc_id is GuC FW defined and it is not guaranteed to be
below I915_NUM_ENGINES, so we shouldn't use it with the i915-defined
client->submissions, as we might overflow.
Instead of fixing it, just get rid of client->submissions, because the
information we get from it is not interesting anymore now that we only
have 1 client.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190814002145.29056-1-daniele.ceraolospurio@intel.com
Stop assuming we only get called with irqs-on for disarming the
breadcrumbs, and do a full save/restore spin_lock_irq.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813132916.20382-2-chris@chris-wilson.co.uk
We don't care about internal firmware status changes unless
we are doing some real debugging. Note that our CI is not
using DRM_I915_DEBUG_GUC config by default so use it.
v2: protect against accidental overwrites (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190813081559.23936-1-michal.wajdeczko@intel.com
Since execlists and the guc have diverged in their port tracking, we
cannot simply reuse the execlists cancellation code as it leads to
unbalanced reference counting. Use a local, simpler routine for the guc.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812203626.3948-1-chris@chris-wilson.co.uk
We rely on the tasklet to update the GT PM refcount, so we can't disable
it even if we've processed all the requests for the engine because we
might have detected the request completion before the interrupt arrived.
Since on all platforms on which we plan to support guc submission we
don't allow disabling the breadcrumb interrupts, we can further siplify
the park/unpark flow by removing the interrupt pin/unpin. A BUG_ON has
been added to catch changes to this flow that would require us to
restore some kind of pinning.
v2: split removal of engine_pin/unpin_breadcrumbs_irq to its own
patch (chris)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812233152.2172-1-daniele.ceraolospurio@intel.com
i915_irq.c is large. It serves as the central dispatch and handler for
all of our device interrupts. Lets break it up by pulling out the GT
interrupt handlers.
Based on a patch by Chris Wilson.
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811210633.18417-1-chris@chris-wilson.co.uk
i915_irq.c is large. It serves as the central dispatch and handler for
all of our device interrupts. Pull out the GT pm interrupt handling
(leaving the central dispatch) so that we can encapsulate the logic a
little better.
Based on a patch by Chris Wilson.
Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811142801.2460-1-chris@chris-wilson.co.uk
Include 2019 in copyright years and start using SPDX tag.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812092935.21048-1-michal.wajdeczko@intel.com
Since commit 6ca9a2beb5 ("drm/i915: Unwind i915_gem_init() failure")
we believed that we correctly handle all errors encountered during
GuC initialization, including special one that indicates request to
run driver with disabled GPU submission (-EIO).
Unfortunately since commit 121981fafe ("drm/i915/guc: Combine
enable_guc_loading|submission modparams") we stopped using that
error code to avoid unwanted fallback to execlist submission mode.
In result any GuC initialization failure was treated as non-recoverable
error leading to driver load abort, so we could not even read related
GuC error log to investigate cause of the problem.
For now always return -EIO on any uC hardware related failure.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811195132.9660-5-michal.wajdeczko@intel.com
Our old messages were redundant or misleading (as loaded is
not the same as running). Keep only one message for debug.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811195132.9660-4-michal.wajdeczko@intel.com
After successful uC initialization we are reporting GuC
firmware version and status of GuC submission and HuC.
Add HuC fw version to this report to make it complete,
but also skip all HuC info if HuC is not supported.
v2: squeeze to one line (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812073949.24076-1-michal.wajdeczko@intel.com
We don't want to rely on misleading WOPCM partitioning error.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190811195132.9660-2-michal.wajdeczko@intel.com
We can already clear an object with the blt, so try to do the same to
support copying from one object backing store to another. Really this is
just object -> object, which is not that useful yet, what we really want
is two backing stores, but that will require some vma rework first,
otherwise we are stuck with "tmp" objects.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190810174338.19810-1-chris@chris-wilson.co.uk
Move the timeline from being inside the intel_ring to intel_context
itself. This saves much pointer dancing and makes the relations of the
context to its timeline much clearer.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809182518.20486-4-chris@chris-wilson.co.uk
Refactor the backends to handle the deferred context allocation in a
consistent manner, and allow calling it as an explicit first step in
pinning a context for the first time. This should make it easier for
backends to keep track of partially constructed contexts from
initialisation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809182518.20486-2-chris@chris-wilson.co.uk
Since we have already stopped the ring, cleared the ring, disabled the
ring (and verifying the ring is clear), a later debug message that the
ring is no longer clear serves no function. It appears it restarts
anyway, and we verify that the ring started correctly afterwards.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808074207.18274-4-chris@chris-wilson.co.uk
It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
from i915_drv.h to avoid sprinkling includes all over the place; this
can be changed as a follow-up if necessary.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0141b4e1f1bf2deb65730ce6973863a3a16ab38f.1565271681.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f2b887002150acdf218385ea846f7aa617aa5f15.1565271681.git.jani.nikula@intel.com
It used to be handy that we only had a couple of headers, but over time
i915_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d7826e365695f691a3ac69a69ff6f2bbdb62700d.1565271681.git.jani.nikula@intel.com
As we need to acquire a mutex to serialise the final
intel_wakeref_put, we need to ensure that we are in process context at
that time. However, we want to allow operation on the intel_wakeref from
inside timer and other hardirq context, which means that need to defer
that final put to a workqueue.
Inside the final wakeref puts, we are safe to operate in any context, as
we are simply marking up the HW and state tracking for the potential
sleep. It's only the serialisation with the potential sleeping getting
that requires careful wait avoidance. This allows us to retain the
immediate processing as before (we only need to sleep over the same
races as the current mutex_lock).
v2: Add a selftest to ensure we exercise the code while lockdep watches.
v3: That test was extremely loud and complained about many things!
v4: Not a whale!
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111295
References: https://bugs.freedesktop.org/show_bug.cgi?id=111245
References: https://bugs.freedesktop.org/show_bug.cgi?id=111256
Fixes: 18398904ca ("drm/i915: Only recover active engines")
Fixes: 51fbd8de87 ("drm/i915/pmu: Atomically acquire the gt_pm wakeref")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808202758.10453-1-chris@chris-wilson.co.uk
Grr, missed one*. For using the legacy engine map, we should use
engine->legacy_idx. Ideally, we should know the intel_context in the
selftest and avoid all the fiddling around with unwanted GEM contexts.
* In my defence, the conflict was added in another patch after it was
tested by CI.
v2: mock engines needs legacy love as well
Fixes: f1c4d157ab ("drm/i915: Fix up the inverse mapping for default ctx->engines[]")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808194525.9410-2-chris@chris-wilson.co.uk
The order in which we store the engines inside default_engines() for the
legacy ctx->engines[] has to match the legacy I915_EXEC_RING selector
mapping in execbuf::user_map. If we present VCS2 as being the second
instance of the video engine, legacy userspace calls that I915_EXEC_BSD2
and so we need to insert it into the second video slot.
v2: Record the legacy mapping (hopefully we can remove this need in the
future)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111328
Fixes: 2edda80db3 ("drm/i915: Rename engines to match their user interface")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> #v1
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808110612.23539-2-chris@chris-wilson.co.uk
Ignore the central i915->kernel_context for allocating an engine, as
that GEM context is being phased out. For internal clients, we just need
the per-engine logical state, so allocate it at the point of use.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190808110612.23539-1-chris@chris-wilson.co.uk
Insert few more failure points into firmware fetch procedure to check
use of the wrong blob name or use of the mismatched firmware versions.
Also update some messages (remove ptr, duplicated infos) and stop
treating all fetch errors as missing firmware case.
v2: update log levels (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[ickle: fixup compiler warning for non-debug builds]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190807183759.8588-1-michal.wajdeczko@intel.com
WOPCM programming error might be due to inserted earlier probe
failure that could affects HuC firmware loading and thus impacts
result of WOPCM partitioning that would be now incompatible with
previously programmed values.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190807170034.8440-7-michal.wajdeczko@intel.com
When we failed to fetch GuC firmware there is no point in fetching
HuC firmware as we will not be able to use it without working GuC.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190807170034.8440-4-michal.wajdeczko@intel.com
There is no point in selecting HuC firmware if GuC is unsupported
or it was already disabled, as we need GuC to authenticate HuC.
While around, make uc_fw_init_early work without direct access
to whole i915, pass only needed platform/rev info.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190807170034.8440-3-michal.wajdeczko@intel.com
