xfs_bmap_del_extent() handles extent removal from the in-core and
on-disk extent lists. When removing a delalloc range, it updates the
indirect block reservation appropriately based on the removal. It
currently enforces that the new indirect block reservation is less than
or equal to the original. This is normally the case in all situations
except for in certain cases when the removed range creates a hole in a
single delalloc extent, thus splitting a single delalloc extent in two.
It is possible with small enough extents to split an indlen==1 extent
into two such slightly smaller extents. This leaves one extent with 0
indirect blocks and leads to assert failures in other areas (e.g.,
xfs_bunmapi() if the extent happens to be removed).
Update the indlen distribution code to steal blocks from the deleted
extent, if necessary, to satisfy the worst case total indirect
reservation for the new extents. This is safe as the caller does not
update the fdblocks counters until the extent is removed. Blocks stolen
in this manner simply remain accounted as allocated, having ownership
transferred from the data extent to an indirect reservation.
As a precaution, fall back to the original reservation algorithm if the
new indlen requirement is not met and warn if we end up with extents
without any reservation at all to detect this more easily in the future.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The delayed allocation indirect reservation splitting code is not
sufficient in some cases where a delalloc extent is split in two. In
preparation for enhancements to this code, refactor the current indlen
distribution algorithm into a new helper function.
[dchinner: rename temp, temp2 variables]
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_bunmapi() currently updates the fdblocks counter, unreserves quota,
etc. before the extent is deleted by xfs_bmap_del_extent(). The function
has problems dividing up the indirect reserved blocks for scenarios
where a single delalloc extent is split in two. Particularly, there
aren't always enough blocks reserved for multiple extents in a single
extent reservation.
The solution to this problem is to allow the extent removal code to
steal from the deleted extent to meet indirect reservation requirements.
Move the block of code in xfs_bmapi() that updates the fdblocks counter
to after the call to xfs_bmap_del_extent() to allow the codepath to
update the extent record before the free blocks are accounted. Also,
reshuffle the code slightly so the delalloc accounting occurs near the
xfs_bmap_del_extent() call to provide context for the comments.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add a DEBUG mode-only sysfs knob to enable forced buffered write
failure. An additional side effect of this mode is brute force killing
of delayed allocation blocks in the range of the write. The latter is
the prime motiviation behind this patch, as userspace test
infrastructure requires a reliable mechanism to create and split
delalloc extents without causing extent conversion.
Certain fallocate operations (i.e., zero range) were used for this in
the past, but the implementations have changed such that delalloc
extents are flushed and converted to real blocks, rendering the test
useless.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Changes:
o Only perform torn log write detection on dirty logs. This prevents
failures being detected due to a clean filesystem being moved
between machines or kernels of different architectures (e.g. 32
-> 64 bit, BE -> LE, etc). This fixes a regression introduced by
the torn log write detection in 4.5-rc1.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=NDeH
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs fixes from Dave Chinner:
"This is a fix for a regression introduced in 4.5-rc1 by the new torn
log write detection code. The regression only affects people moving a
clean filesystem between machines/kernels of different architecture
(such as changing between 32 bit and 64 bit kernels), but this is the
recommended (and only!) safe way to migrate a filesystem between
architectures so we really need to ensure it works.
The changes are larger than I'd prefer right at the end of the release
cycle, but the majority of the change is just factoring code to enable
the detection of a clean log at the correct time to avoid this issue.
Changes:
- Only perform torn log write detection on dirty logs. This prevents
failures being detected due to a clean filesystem being moved
between machines or kernels of different architectures (e.g. 32 ->
64 bit, BE -> LE, etc). This fixes a regression introduced by the
torn log write detection in 4.5-rc1"
* tag 'xfs-for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: only run torn log write detection on dirty logs
xfs: refactor in-core log state update to helper
xfs: refactor unmount record detection into helper
xfs: separate log head record discovery from verification
bp_release is set to 0 just before the breakpoint of the for loop before
the conditional check (in line 458). The other breakpoint is a goto that
skips the dead code.
Addresses-Coverity-Id: 102338
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Check the sizes of XFS on-disk structures when compiling the kernel.
Use this to catch inadvertent changes in structure size due to padding
and alignment issues, etc.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We need to create a new ioend if the current writepage call isn't
logically contiguous with the range contained in the previous ioend.
Hopefully writepage gets called in order of increasing file offset.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Use named array initializers for the string arrays used to dump log
items, rather than depending on the order being maintained correctly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Commit 88740da18[1] introduced a function to compute the maximum
height of the inode btree back in 1994. Back then, apparently, the
freespace and inode btrees shared the same geometry; however, it has
long since been the case that the inode and freespace btrees have
different record and key sizes. Therefore, we must use m_inobt_mnr if
we want a correct calculation/log reservation/etc.
(Yes, this bug has been around for 21 years and ten months.)
(Yes, I was in middle school when this bug was committed.)
[1] http://oss.sgi.com/cgi-bin/gitweb.cgi?p=archive/xfs-import.git;a=commitdiff;h=88740da18ddd9d7ba3ebaa9502fefc6ef2fd19cd
Historical-research-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If a crash occurs immediately after a filesystem grow operation, the
updated superblock geometry is found only in the log. After we
recover the log, the superblock is reread and re-initialised and so
has the new geometry in memory. If the new geometry has more AGs
than prior to the grow operation, then the new AGs will not have
in-memory xfs_perag structurea associated with them.
This will result in an oops when the first metadata buffer from a
new AG is looked up in the buffer cache, as the block lies within
the new geometry but then fails to find a perag structure on lookup.
This is easily fixed by simply re-initialising the perag structure
after re-reading the superblock at the conclusion of the first pahse
of log recovery.
This, however, does not fix the case of log recovery requiring
access to metadata in the newly grown space. Fortunately for us,
because the in-core superblock has not been updated, this will
result in detection of access beyond the end of the filesystem
and so recovery will fail at that point. If this proves to be
a problem, then we can address it separately to the current
reported issue.
Reported-by: Alex Lyakas <alex@zadarastorage.com>
Tested-by: Alex Lyakas <alex@zadarastorage.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
XFS uses CRC verification over a sub-range of the head of the log to
detect and handle torn writes. This torn log write detection currently
runs unconditionally at mount time, regardless of whether the log is
dirty or clean. This is problematic in cases where a filesystem might
end up being moved across different, incompatible (i.e., opposite
byte-endianness) architectures.
The problem lies in the fact that log data is not necessarily written in
an architecture independent format. For example, certain bits of data
are written in native endian format. Further, the size of certain log
data structures differs (i.e., struct xlog_rec_header) depending on the
word size of the cpu. This leads to false positive crc verification
errors and ultimately failed mounts when a cleanly unmounted filesystem
is mounted on a system with an incompatible architecture from data that
was written near the head of the log.
Update the log head/tail discovery code to run torn write detection only
when the log is not clean. This means something other than an unmount
record resides at the head of the log and log recovery is imminent. It
is a requirement to run log recovery on the same type of host that had
written the content of the dirty log and therefore CRC failures are
legitimate corruptions in that scenario.
Reported-by: Jan Beulich <JBeulich@suse.com>
Tested-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Once the record at the head of the log is identified and verified, the
in-core log state is updated based on the record. This includes
information such as the current head block and cycle, the start block of
the last record written to the log, the tail lsn, etc.
Once torn write detection is conditional, this logic will need to be
reused. Factor the code to update the in-core log data structures into a
new helper function. This patch does not change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Once the mount sequence has identified the head and tail blocks of the
physical log, the record at the head of the log is located and examined
for an unmount record to determine if the log is clean. This currently
occurs after torn write verification of the head region of the log.
This must ultimately be separated from torn write verification and may
need to be called again if the log head is walked back due to a torn
write (to determine whether the new head record is an unmount record).
Separate this logic into a new helper function. This patch does not
change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The code that locates the log record at the head of the log is buried in
the log head verification function. This is fine when torn write
verification occurs unconditionally, but this behavior is problematic
for filesystems that might be moved across systems with different
architectures.
In preparation for separating examination of the log head for unmount
records from torn write detection, lift the record location logic out of
the log verification function and into the caller. This patch does not
change behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Just use the t_blk_res field directly instead of obsfucating the reference
by a macro.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
inode32/inode64 allocator behavior with respect to mount, remount
and growfs is a little tricky.
The inode32 mount option should only enable the inode32 allocator
heuristics if the filesystem is large enough for 64-bit inodes to
exist. Today, it has this behavior on the initial mount, but a
remount with inode32 unconditionally changes the allocation
heuristics, even for a small fs.
Also, an inode32 mounted small filesystem should transition to the
inode32 allocator if the filesystem is subsequently grown to a
sufficient size. Today that does not happen.
This patch consolidates xfs_set_inode32 and xfs_set_inode64 into a
single new function, and moves the "is the maximum inode number big
enough to matter" test into that function, so it doesn't rely on the
caller to get it right - which remount did not do, previously.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
busyp->bno is printed with a %llu format specifier when the
intention is to print a hexadecimal value. Trivial fix to
use %llx instead. Found with smatch static analysis:
fs/xfs/xfs_discard.c:229 xfs_discard_extents() warn: '0x'
prefix is confusing together with '%llu' specifier
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Perform basic sanitization of remount options by
passing the option string and a dummy mount structure
through xfs_parseargs and returning the result.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This should be a no-op change, just switch to token parsing
like every other respectable filesystem does.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This plugs 2 trivial leaks in xfs_attr_shortform_list and
xfs_attr3_leaf_list_int.
Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If the block size of a filesystem is not at least PAGE_SIZEd, then
at this point in time DAX cannot be used due to the fact we can't
guarantee extents are page sized or aligned without further work.
Hence disallow setting the DAX flag on an inode if the block size is
too small. Also, be defensive and check the block size when reading
an inode in off disk.
In future, we want to allow DAX to work on any filesystem, so this
is temporary while we sort of the correct conbination of extent size
hints and allocation alignment configurations needed to guarantee
page sized and aligned extent allocation for DAX enabled files.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we set or clear the XFS_DIFLAG2_DAX flag, we should also
set/clear the S_DAX flag in the VFS inode. To do this, we need to
ensure that we first flush and remove any cached entries in the
radix tree to ensure the correct data access method is used when we
next try to read or write data. We ahve to be especially careful
here to lock out page faults so they don't race with the flush and
invalidation before we change the access mode.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Only regular files can use DAX for data operations, so we should
restrict setting it on the VFS inode to regular files. Setting it on
metadata inodes may cause the VFS to do the wrong thing for such
inodes, so avoid potential problems by restricting the scope of the
flag to what we know is supported.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Only file data can use DAX, so we should onyl be able to set this
flag on regular files. However, the flag also serves as an "inherit"
flag at file create time when set on directories, so limit the
FS_IOC_FSSETXATTR ioctl to only set this flag on regular files and
directories.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Previously calls to dax_writeback_mapping_range() for all DAX filesystems
(ext2, ext4 & xfs) were centralized in filemap_write_and_wait_range().
dax_writeback_mapping_range() needs a struct block_device, and it used
to get that from inode->i_sb->s_bdev. This is correct for normal inodes
mounted on ext2, ext4 and XFS filesystems, but is incorrect for DAX raw
block devices and for XFS real-time files.
Instead, call dax_writeback_mapping_range() directly from the filesystem
->writepages function so that it can supply us with a valid block
device. This also fixes DAX code to properly flush caches in response
to sync(2).
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dax_clear_blocks() needs a valid struct block_device and previously it
was using inode->i_sb->s_bdev in all cases. This is correct for normal
inodes on mounted ext2, ext4 and XFS filesystems, but is incorrect for
DAX raw block devices and for XFS real-time devices.
Instead, rename dax_clear_blocks() to dax_clear_sectors(), and change
its arguments to take a bdev and a sector instead of an inode and a
block. This better reflects what the function does, and it allows the
filesystem and raw block device code to pass in an appropriate struct
block_device.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently we can build a long ioend chain during ->writepages that
gets attached to the writepage context. IO submission only then
occurs when we finish all the writepage processing. This means we
can have many ioends allocated and pending, and this violates the
mempool guarantees that we need to give about forwards progress.
i.e. we really should only have one ioend being built at a time,
otherwise we may drain the mempool trying to allocate a new ioend
and that blocks submission, completion and freeing of ioends that
are already in progress.
To prevent this situation from happening, we need to submit ioends
for IO as soon as they are ready for dispatch rather than queuing
them for later submission. This means the ioends have bios built
immediately and they get queued on any plug that is current active.
Hence if we schedule away from writeback, the ioends that have been
built will make forwards progress due to the plug flushing on
context switch. This will also prevent context switches from
creating unnecessary IO submission latency.
We can't completely avoid having nested IO allocation - when we have
a block size smaller than a page size, we still need to hold the
ioend submission until after we have marked the current page dirty.
Hence we may need multiple ioends to be held while the current page
is completely mapped and made ready for IO dispatch. We cannot avoid
this problem - the current code already has this ioend chaining
within a page so we can mostly ignore that it occurs.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Separate out the bufferhead based mapping from the writepage code so
that we have a clear separation of the page operations and the
bufferhead state.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_cluster_write() is not necessary now that xfs_vm_writepages()
aggregates writepage calls across a single mapping. This means we no
longer need to do page lookups in xfs_cluster_write, so writeback
only needs to look up th epage cache once per page being written.
This also removes a large amount of mostly duplicate code between
xfs_do_writepage() and xfs_convert_page().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_vm_writepages() calls generic_writepages to writeback a range of
a file, but then xfs_vm_writepage() clusters pages itself as it does
not have any context it can pass between->writepage calls from
__write_cache_pages().
Introduce a writeback context for xfs_vm_writepages() and call
__write_cache_pages directly with our own writepage callback so that
we can pass that context to each writepage invocation. This
encapsulates the current mapping, whether it is valid or not, the
current ioend and it's IO type and the ioend chain being built.
This requires us to move the ioend submission up to the level where
the writepage context is declared. This does mean we do not submit
IO until we packaged the entire writeback range, but with the block
plugging in the writepages call this is the way IO is submitted,
anyway.
It also means that we need to handle discontiguous page ranges. If
the pages sent down by write_cache_pages to the writepage callback
are discontiguous, we need to detect this and put each discontiguous
page range into individual ioends. This is needed to ensure that the
ioend accurately represents the range of the file that it covers so
that file size updates during IO completion set the size correctly.
Failure to take into account the discontiguous ranges results in
files being too small when writeback patterns are non-sequential.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We currently have code to cancel ioends being built because we
change bufferhead state as we build the ioend. On error, this needs
to be unwound and so we have cancelling code that walks the buffers
on the ioend chain and undoes these state changes.
However, the IO submission path already handles state changes for
buffers when a submission error occurs, so we don't really need a
separate cancel function to do this - we can simply submit the
ioend chain with the specific error and it will be cancelled rather
than submitted.
Hence we can remove the explicit cancel code and just rely on
submission to deal with the error correctly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Remove the nonblocking optimisation done for mapping lookups during
writeback. It's not clear that leaving a hole in the writeback range
just because we couldn't get a lock is really a win, as it makes us
do another small random IO later on rather than a large sequential
IO now.
As this gets in the way of sane error handling later on, just remove
for the moment and we can re-introduce an equivalent optimisation in
future if we see problems due to extent map lock contention.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The places where we use this macro already clear unnecessary IO
flags (e.g. through xfs_bwrite()) or never have unexpected IO flags
set on them in the first place (e.g. iclog buffers). Remove the
macro from these locations, and where necessary clear only the
specific flags that are conditional in the current buffer context.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
They only set/clear/check a flag, no need for obfuscating this
with a macro.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
They only set/clear/check a flag, no need for obfuscating this
with a macro.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
They only set/clear/check a flag, no need for obfuscating this
with a macro.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
They only set/clear/check a flag, no need for obfuscating this
with a macro.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
They only set/clear/check a flag, no need for obfuscating this
with a macro.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Move the di_mode value from the xfs_icdinode to the VFS inode, reducing
the xfs_icdinode byte another 2 bytes and collapsing another 2 byte hole
in the structure.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We can store the di_changecount in the i_version field of the VFS
inode and remove another 8 bytes from the xfs_icdinode.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull another 4 bytes out of the xfs_icdinode.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The VFS tracks the inode nlink just like the xfs_icdinode. We can
remove the variable from the icdinode and use the VFS inode variable
everywhere, reducing the size of the xfs_icdinode by a further 4
bytes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We are going to keep certain on-disk information in the VFS inode
rather than in a separate XFS specific stucture, so we have to be
careful of the VFS code clearing that information when we
re-initialise reclaimable cached inodes during lookup. If we don't
do this, then we lose critical information from the inode and that
results in corruption being detected.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
So we don't have to carry an di_onlink variable around anymore, move
the inode conversion from v1 inode format to v2 inode format into
xfs_inode_from_disk(). This means we can remove the di_onlink fields
from the struct xfs_icdinode.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Now that the struct xfs_icdinode is not directly related to the
on-disk format, we can cull things in it we really don't need to
store:
- magic number never changes
- padding is not necessary
- next_unlinked is never used
- inode number is redundant
- uuid is redundant
- lsn is accessed directly from dinode
- inode CRC is only accessed directly from dinode
Hence we can remove these from the struct xfs_icdinode and redirect
the code that uses them to the xfs_dinode appripriately. This
reduces the size of the struct icdinode from 152 bytes to 88 bytes,
and removes a fair chunk of unnecessary code, too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The struct xfs_inode has two copies of the current timestamps in it,
one in the vfs inode and one in the struct xfs_icdinode. Now that we
no longer log the struct xfs_icdinode directly, we don't need to
keep the timestamps in this structure. instead we can copy them
straight out of the VFS inode when formatting the inode log item or
the on-disk inode.
This reduces the struct xfs_inode in size by 24 bytes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We currently carry around and log an entire inode core in the
struct xfs_inode. A lot of the information in the inode core is
duplicated in the VFS inode, but we cannot remove this duplication
of infomration because the inode core is logged directly in
xfs_inode_item_format().
Add a new function xfs_inode_item_format_core() that copies the
inode core data into a struct xfs_icdinode that is pulled directly
from the log vector buffer. This means we no longer directly
copy the inode core, but copy the structures one member at a time.
This will be slightly less efficient than copying, but will allow us
to remove duplicate and unnecessary items from the struct xfs_inode.
To enable us to do this, call the new structure a xfs_log_dinode,
so that we know it's different to the physical xfs_dinode and the
in-core xfs_icdinode.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Buffers without verifiers issue runtime warnings on XFS. We don't
have anything we can actually verify in the RT buffers (no CRCs, not
magic numbers, etc), but we still need verifiers to avoid the
warnings.
Add a set of dummy verifier operations for the realtime buffers and
apply them in the appropriate places.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When logging buffers, we attach a type to them that follows the
buffer all the way into the log and is used to identify the buffer
contents in log recovery. Both the realtime summary buffers and the
bitmap buffers do not have types defined or set, so when we try to
log them we see assert failure:
XFS: Assertion failed: (bip->bli_flags & XFS_BLI_STALE) || (xfs_blft_from_flags(&bip->__bli_format) > XFS_BLFT_UNKNOWN_BUF && xfs_blft_from_flags(&bip->__bli_format) < XFS_BLFT_MAX_BUF), file: fs/xfs/xfs_buf_item.c, line: 294
Fix this by adding buffer log format types for these buffers, and
add identification support into log recovery for them. Only build the log
recovery support if CONFIG_XFS_RT=y - we can't get into log recovery for real
time filesystems if support is not built into the kernel, and this avoids
potential build problems.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If the filesystem has shut down, xfs_end_io() currently sets an
error on the ioend and proceeds to ioend destruction. The ioend
might contain a truncate transaction if the I/O extended the size of
the file. This transaction is only cleaned up in
xfs_setfilesize_ioend(), however, which is skipped in this case.
This results in an xfs_log_ticket leak message when the associate
cache slab is destroyed (e.g., on rmmod).
This was originally reproduced by xfs/141 on a distro kernel. The
problem is reproducible on an upstream kernel, but not easily
detected in current upstream if the xfs_log_ticket cache happens to
be merged with another cache. This can be reproduced more
deterministically with the 'slab_nomerge' kernel boot option.
Update xfs_end_io() to proceed with normal end I/O processing after
an error is set on an ioend due to fs shutdown. The I/O type-based
processing is already designed to handle an I/O error and ensure
that the ioend is cleaned up correctly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The xfs_vm_write_failed() handler is currently responsible for cleaning
up any delalloc blocks over the range of a failed write beyond EOF.
Failure to do so results in warning messages and other inconsistencies
between buffer and extent state. The ->releasepage() handler currently
warns in the event of a page being released with either unwritten or
delalloc buffers, as neither is ever expected by the time a page is
released.
As has been reproduced by generic/083 on a -bsize=1k fs, it is currently
possible to trigger the ->releasepage() warning for a page with
unwritten buffers when a filesystem is near ENOSPC. This is reproduced
by the following sequence:
$ mkfs.xfs -f -b size=1k -d size=100m <dev>
$ mount <dev> /mnt/
$
$ xfs_io -fc "falloc -k 0 1k" /mnt/file
$ dd if=/dev/zero of=/mnt/enospc conv=notrunc oflag=append
$
$ xfs_io -c "pwrite 512 1k" /mnt/file
$ xfs_io -d -c "pwrite 16k 1k" /mnt/file
The first pwrite command attempts a block unaligned write across an
unwritten block and a hole. The delalloc for the hole fails with ENOSPC
and the subsequent error handling does not clean up the unwritten buffer
that was instantiated during the first ->get_block() call.
The second pwrite triggers a warning as part of the inode mapping
invalidation that occurs prior to direct I/O. The releasepage() handler
detects the unwritten buffer at this time, warns and prevents the
release of the page.
To deal with this problem, update xfs_vm_write_failed() to clean up
unwritten as well as delalloc buffers that are beyond EOF and within the
range of the failed write.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Move the shortform attr structure definition to the same place as the
other attribute structure definitions for consistency and also so that
xfs/122 verifies the structure size.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Hendik has reported suspend failures due to xfsaild blocking the freezer
to settle down.
Jan 17 19:59:56 linux-6380 kernel: PM: Syncing filesystems ... done.
Jan 17 19:59:56 linux-6380 kernel: PM: Preparing system for sleep (mem)
Jan 17 19:59:56 linux-6380 kernel: Freezing user space processes ... (elapsed 0.001 seconds) done.
Jan 17 19:59:56 linux-6380 kernel: Freezing remaining freezable tasks ...
Jan 17 19:59:56 linux-6380 kernel: Freezing of tasks failed after 20.002 seconds (1 tasks refusing to freeze, wq_busy=0):
Jan 17 19:59:56 linux-6380 kernel: xfsaild/dm-5 S 00000000 0 1293 2 0x00000080
Jan 17 19:59:56 linux-6380 kernel: f0ef5f00 00000046 00000200 00000000 ffff9022 c02d3800 00000000 00000032
Jan 17 19:59:56 linux-6380 kernel: ee0b2400 00000032 f71e0d00 f36fabc0 f0ef2d00 f0ef6000 f0ef2d00 f12f90c0
Jan 17 19:59:56 linux-6380 kernel: f0ef5f0c c0844e44 00000000 f0ef5f6c f811e0be 00000000 00000000 f0ef2d00
Jan 17 19:59:56 linux-6380 kernel: Call Trace:
Jan 17 19:59:56 linux-6380 kernel: [<c0844e44>] schedule+0x34/0x90
Jan 17 19:59:56 linux-6380 kernel: [<f811e0be>] xfsaild+0x5de/0x600 [xfs]
Jan 17 19:59:56 linux-6380 kernel: [<c0286cbb>] kthread+0x9b/0xb0
Jan 17 19:59:56 linux-6380 kernel: [<c0848a79>] ret_from_kernel_thread+0x21/0x38
The issue has been there for quite some time but it has been made
visible by only by 24ba16bb3d ("xfs: clear PF_NOFREEZE for xfsaild
kthread") because the suspend started seeing xfsaild.
The above commit has missed that the !xfs_ail_min branch might call
schedule with TASK_INTERRUPTIBLE without calling try_to_freeze so the pm
suspend would wake up the kernel thread over and over again without any
progress. What we want here is to use freezable_schedule instead to hide
the thread from the suspend.
While we are here also change schedule_timeout to freezable variant to
prevent from spurious wakeups by suspend.
[dchinner: re-add set_freezeable call so the freezer will account properly
for this kthread. ]
Reported-by: Hendrik Woltersdorf <hendrikw@arcor.de>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Old leftovers.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
... instead of leaving it in the methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We only need to communicate two bits of information to the direct I/O
completion handler:
(1) do we need to convert any unwritten extents in the range
(2) do we need to check if we need to update the inode size based
on the range passed to the completion handler
We can use the private data passed to the get_block handler and the
completion handler as a simple bitmask to communicate this information
instead of the current complicated infrastructure reusing the ioends
from the buffer I/O path, and thus avoiding a memory allocation and
a context switch for any non-trivial direct write. As a nice side
effect we also decouple the direct I/O path implementation from that
of the buffered I/O path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
This way we can pass back errors to the file system, and allow for
cleanup required for all direct I/O invocations.
Also allow the ->end_io handlers to return errors on their own, so that
I/O completion errors can be passed on to the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Default quotas are globally set due historical reasons. IRIX only
supported user and project quotas, and default quota was only
applied to user quotas.
In Linux, when a default quota is set, all different quota types
inherits the same default value.
An user with a quota limit larger than the default quota value, will
still be limited to the default value because the group quotas also
inherits the default quotas. Unless the group which the user belongs
to have a custom quota limit set.
This patch aims to split the default quota value by quota type.
Allowing each quota type having different default values.
Default time limits are still set globally. XFS does not set a
per-user/group timer, but a single global timer. For changing this
behavior, some changes should be made in user-space tools another
bugs being fixed.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add code to allow the Q_XGETNEXTQUOTA quotactl to quickly find
all active quotas by examining the quota inode, and skipping
over unallocated or uninitialized regions.
Userspace can then use this interface rather than i.e. a
getpwent() loop when asked to report all active quotas.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Factor xfs_seek_hole_data into an unlocked helper which takes
an xfs inode rather than a file for internal use.
Also allow specification of "end" - the vfs lseek interface is
defined such that any offset past eof/i_size shall return -ENXIO,
but we will use this for quota code which does not maintain i_size,
and we want to be able to SEEK_DATA past i_size as well. So the
lseek path can send in i_size, and the quota code can determine
its own ending offset.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Allow us to get the appropriate quota inode from any
mp & quota flags, not necessarily associated with a
particular dqp. Needed for when we are searching for
the next active ID with quotas and we want to examine
the quota inode.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Quota IDs are unsigned, and so we can pass in values up
to 2^32-1. But if we try to initialize a block containing
values over MAX_INT, curid will overflow and assert.
curid holds a quota ID, so give it the proper
xfs_dqid_t type (and remove the now-impossible ASSERT).
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Since the checksum function and the field are both __le32, don't
perform endian conversion when comparing the two. This fixes mount
failures on ppc64.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
RT allocation can fail on a debug kernel with:
XFS: Assertion failed: xfs_isilocked(ip, XFS_ILOCK_SHARED|XFS_ILOCK_EXCL), file: fs/xfs/libxfs/xfs_bmap.c, line: 4039
When modifying the summary inode during allocation. This occurs
because the summary inode is never locked, and xfs_bmapi_*
operations expect it to be locked. The summary inode is effectively
protected byt he lock on the bitmap inode, so this really is only a
debug kernel issue.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull final vfs updates from Al Viro:
- The ->i_mutex wrappers (with small prereq in lustre)
- a fix for too early freeing of symlink bodies on shmem (they need to
be RCU-delayed) (-stable fodder)
- followup to dedupe stuff merged this cycle
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: abort dedupe loop if fatal signals are pending
make sure that freeing shmem fast symlinks is RCU-delayed
wrappers for ->i_mutex access
lustre: remove unused declaration
To properly support the new DAX fsync/msync infrastructure filesystems
need to call dax_pfn_mkwrite() so that DAX can track when user pages are
dirtied.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.com>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This update contains:
o promotion of XFS_IOC_FS[GS]ETXATTR ioctl to the vfs level so that
it can be shared with other filesystems. The ext4 project quota
functionality is the first target for this. The commits in this
series have not been updated with review or final SOB tags because
the branch they were originally published in was needed by ext4.
Those tags are:
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Dave Chinner <david@fromrobit.com>
o Revert a change that is causing suspend failures.
o Fix a use-after-free that can occur on log mount failures. Been
around forever, but now exposed by other changes to log recovery
made in the first 4.5 merge.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJWoV0hAAoJEK3oKUf0dfodSCQP/RXlZp6TQhv2DQ2MW4AeZRzs
kzp3zvWUN1udB0fgAARMUDbHHeqEp5gUB6Fj8GOjgh69VGac1pjR2GOvEA9UbnhL
uLQwaRggVB/BJV6+hDUw283kENXE1H8JcDiEIFratwdiZ6KrhniMptzrbUnG22LO
cBLzHOCFI0x4ib2fdTvrVV8bNaAaLYViYUxuVwzblzhoODN4Nmv5HZ5BlMHDFJsd
E47Yw/0tdYFVRDuujN22ylYsKsySXBxPaWyUvDDlW/ryeKSfwn3V8Y7BSDZU4vUZ
CFstsqlzEySGrNNCfor5bFn9EO3i882M+DU60UhZAKRgvAzANAsxjJ97B8Of5KA+
/0OQarl0ZNJ93g6mZJ2bhuVpRCIGWJ3rBl9+GK8JdtsjF0mPOvrusKTQKoz1frK7
B8h52P+jxfqrrqeqpNigMWfDKYkXCfUUMAJm57+QILAoTNRupAzgFyXZnSgAermE
jaDfvnkaSZxfaLtTOlkkpGukhbFubhAWTk3TksVxICPXztZelQLmmbqjZnTYFCT/
dKieKbwop58DBTycFuzCrWiSjXjodAq/+IfpAQcvJ5xZPLtgfjHxQaHD6zsOVKzQ
lWosgYOnIaN/PYPOpAzo0sRDf80d5KFjwcdSjrWZVZ5lGfAsx8iYErh3v0Xv3rkE
YuKQw2AjVVtD64SfHvIn
=wEy8
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull more xfs updates from Dave Chinner:
"This is the second update for XFS that I mentioned in the original
pull request last week.
It contains a revert for a suspend regression in 4.4 and a fix for a
long standing log recovery issue that has been further exposed by all
the log recovery changes made in the original 4.5 merge.
There is one more thing in this pull request - one that I forgot to
merge into the origin. That is, pulling the XFS_IOC_FS[GS]ETXATTR
ioctl up to the VFS level so that other filesystems can also use it
for modifying project quota IDs
Summary:
- promotion of XFS_IOC_FS[GS]ETXATTR ioctl to the vfs level so that
it can be shared with other filesystems. The ext4 project quota
functionality is the first target for this. The commits in this
series have not been updated with review or final SOB tags because
the branch they were originally published in was needed by ext4.
Those tags are:
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Dave Chinner <david@fromrobit.com>
- Revert a change that is causing suspend failures.
- Fix a use-after-free that can occur on log mount failures. Been
around forever, but now exposed by other changes to log recovery
made in the first 4.5 merge"
* tag 'xfs-for-linus-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: log mount failures don't wait for buffers to be released
Revert "xfs: clear PF_NOFREEZE for xfsaild kthread"
xfs: introduce per-inode DAX enablement
xfs: use FS_XFLAG definitions directly
fs: XFS_IOC_FS[SG]SETXATTR to FS_IOC_FS[SG]ETXATTR promotion
Recently I've been seeing xfs/051 fail on 1k block size filesystems.
Trying to trace the events during the test lead to the problem going
away, indicating that it was a race condition that lead to this
ASSERT failure:
XFS: Assertion failed: atomic_read(&pag->pag_ref) == 0, file: fs/xfs/xfs_mount.c, line: 156
.....
[<ffffffff814e1257>] xfs_free_perag+0x87/0xb0
[<ffffffff814e21b9>] xfs_mountfs+0x4d9/0x900
[<ffffffff814e5dff>] xfs_fs_fill_super+0x3bf/0x4d0
[<ffffffff811d8800>] mount_bdev+0x180/0x1b0
[<ffffffff814e3ff5>] xfs_fs_mount+0x15/0x20
[<ffffffff811d90a8>] mount_fs+0x38/0x170
[<ffffffff811f4347>] vfs_kern_mount+0x67/0x120
[<ffffffff811f7018>] do_mount+0x218/0xd60
[<ffffffff811f7e5b>] SyS_mount+0x8b/0xd0
When I finally caught it with tracing enabled, I saw that AG 2 had
an elevated reference count and a buffer was responsible for it. I
tracked down the specific buffer, and found that it was missing the
final reference count release that would put it back on the LRU and
hence be found by xfs_wait_buftarg() calls in the log mount failure
handling.
The last four traces for the buffer before the assert were (trimmed
for relevance)
kworker/0:1-5259 xfs_buf_iodone: hold 2 lock 0 flags ASYNC
kworker/0:1-5259 xfs_buf_ioerror: hold 2 lock 0 error -5
mount-7163 xfs_buf_lock_done: hold 2 lock 0 flags ASYNC
mount-7163 xfs_buf_unlock: hold 2 lock 1 flags ASYNC
This is an async write that is completing, so there's nobody waiting
for it directly. Hence we call xfs_buf_relse() once all the
processing is complete. That does:
static inline void xfs_buf_relse(xfs_buf_t *bp)
{
xfs_buf_unlock(bp);
xfs_buf_rele(bp);
}
Now, it's clear that mount is waiting on the buffer lock, and that
it has been released by xfs_buf_relse() and gained by mount. This is
expected, because at this point the mount process is in
xfs_buf_delwri_submit() waiting for all the IO it submitted to
complete.
The mount process, however, is waiting on the lock for the buffer
because it is in xfs_buf_delwri_submit(). This waits for IO
completion, but it doesn't wait for the buffer reference owned by
the IO to go away. The mount process collects all the completions,
fails the log recovery, and the higher level code then calls
xfs_wait_buftarg() to free all the remaining buffers in the
filesystem.
The issue is that on unlocking the buffer, the scheduler has decided
that the mount process has higher priority than the the kworker
thread that is running the IO completion, and so immediately
switched contexts to the mount process from the semaphore unlock
code, hence preventing the kworker thread from finishing the IO
completion and releasing the IO reference to the buffer.
Hence by the time that xfs_wait_buftarg() is run, the buffer still
has an active reference and so isn't on the LRU list that the
function walks to free the remaining buffers. Hence we miss that
buffer and continue onwards to tear down the mount structures,
at which time we get find a stray reference count on the perag
structure. On a non-debug kernel, this will be ignored and the
structure torn down and freed. Hence when the kworker thread is then
rescheduled and the buffer released and freed, it will access a
freed perag structure.
The problem here is that when the log mount fails, we still need to
quiesce the log to ensure that the IO workqueues have returned to
idle before we run xfs_wait_buftarg(). By synchronising the
workqueues, we ensure that all IO completions are fully processed,
not just to the point where buffers have been unlocked. This ensures
we don't end up in the situation above.
cc: <stable@vger.kernel.org> # 3.18
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This reverts commit 24ba16bb3d as it
prevents machines from suspending. This regression occurs when the
xfsaild is idle on entry to suspend, and so there s no activity to
wake it from it's idle sleep and hence see that it is supposed to
freeze. Hence the freezer times out waiting for it and suspend is
cancelled.
There is no obvious fix for this short of freezing the filesystem
properly, so revert this change for now.
cc: <stable@vger.kernel.org> # 4.4
Signed-off-by: Dave Chinner <david@fromorbit.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Mark those kmem allocations that are known to be easily triggered from
userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to
memcg. For the list, see below:
- threadinfo
- task_struct
- task_delay_info
- pid
- cred
- mm_struct
- vm_area_struct and vm_region (nommu)
- anon_vma and anon_vma_chain
- signal_struct
- sighand_struct
- fs_struct
- files_struct
- fdtable and fdtable->full_fds_bits
- dentry and external_name
- inode for all filesystems. This is the most tedious part, because
most filesystems overwrite the alloc_inode method.
The list is far from complete, so feel free to add more objects.
Nevertheless, it should be close to "account everything" approach and
keep most workloads within bounds. Malevolent users will be able to
breach the limit, but this was possible even with the former "account
everything" approach (simply because it did not account everything in
fact).
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This update contains:
o extensive CRC validation during log recovery
o several log recovery bug fixes
o Various DAX support fixes
o AGFL size calculation fix
o various cleanups in preparation for new functionality
o project quota ENOSPC notification via netlink
o tracing and debug improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=eCYp
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs updates from Dave Chinner:
"There's not a lot in this - the main addition is the CRC validation of
the entire region of the log that the will be recovered, along with
several log recovery fixes. Most of the rest is small bug fixes and
cleanups.
I have three bug fixes still pending, all that address recently fixed
regressions that I will send to next week after they've had some time
in for-next.
Summary:
- extensive CRC validation during log recovery
- several log recovery bug fixes
- Various DAX support fixes
- AGFL size calculation fix
- various cleanups in preparation for new functionality
- project quota ENOSPC notification via netlink
- tracing and debug improvements"
* tag 'xfs-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (26 commits)
xfs: handle dquot buffer readahead in log recovery correctly
xfs: inode recovery readahead can race with inode buffer creation
xfs: eliminate committed arg from xfs_bmap_finish
xfs: bmapbt checking on debug kernels too expensive
xfs: add tracepoints to readpage calls
xfs: debug mode log record crc error injection
xfs: detect and trim torn writes during log recovery
xfs: fix recursive splice read locking with DAX
xfs: Don't use reserved blocks for data blocks with DAX
XFS: Use a signed return type for suffix_kstrtoint()
libxfs: refactor short btree block verification
libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct
libxfs: use a convenience variable instead of open-coding the fork
xfs: fix log ticket type printing
libxfs: make xfs_alloc_fix_freelist non-static
xfs: make xfs_buf_ioend_async() static
xfs: send warning of project quota to userspace via netlink
xfs: get mp from bma->ip in xfs_bmap code
xfs: print name of verifier if it fails
libxfs: Optimize the loop for xfs_bitmap_empty
...
Pull misc vfs updates from Al Viro:
"All kinds of stuff. That probably should've been 5 or 6 separate
branches, but by the time I'd realized how large and mixed that bag
had become it had been too close to -final to play with rebasing.
Some fs/namei.c cleanups there, memdup_user_nul() introduction and
switching open-coded instances, burying long-dead code, whack-a-mole
of various kinds, several new helpers for ->llseek(), assorted
cleanups and fixes from various people, etc.
One piece probably deserves special mention - Neil's
lookup_one_len_unlocked(). Similar to lookup_one_len(), but gets
called without ->i_mutex and tries to avoid ever taking it. That, of
course, means that it's not useful for any directory modifications,
but things like getting inode attributes in nfds readdirplus are fine
with that. I really should've asked for moratorium on lookup-related
changes this cycle, but since I hadn't done that early enough... I
*am* asking for that for the coming cycle, though - I'm going to try
and get conversion of i_mutex to rwsem with ->lookup() done under lock
taken shared.
There will be a patch closer to the end of the window, along the lines
of the one Linus had posted last May - mechanical conversion of
->i_mutex accesses to inode_lock()/inode_unlock()/inode_trylock()/
inode_is_locked()/inode_lock_nested(). To quote Linus back then:
-----
| This is an automated patch using
|
| sed 's/mutex_lock(&\(.*\)->i_mutex)/inode_lock(\1)/'
| sed 's/mutex_unlock(&\(.*\)->i_mutex)/inode_unlock(\1)/'
| sed 's/mutex_lock_nested(&\(.*\)->i_mutex,[ ]*I_MUTEX_\([A-Z0-9_]*\))/inode_lock_nested(\1, I_MUTEX_\2)/'
| sed 's/mutex_is_locked(&\(.*\)->i_mutex)/inode_is_locked(\1)/'
| sed 's/mutex_trylock(&\(.*\)->i_mutex)/inode_trylock(\1)/'
|
| with a very few manual fixups
-----
I'm going to send that once the ->i_mutex-affecting stuff in -next
gets mostly merged (or when Linus says he's about to stop taking
merges)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
nfsd: don't hold i_mutex over userspace upcalls
fs:affs:Replace time_t with time64_t
fs/9p: use fscache mutex rather than spinlock
proc: add a reschedule point in proc_readfd_common()
logfs: constify logfs_block_ops structures
fcntl: allow to set O_DIRECT flag on pipe
fs: __generic_file_splice_read retry lookup on AOP_TRUNCATED_PAGE
fs: xattr: Use kvfree()
[s390] page_to_phys() always returns a multiple of PAGE_SIZE
nbd: use ->compat_ioctl()
fs: use block_device name vsprintf helper
lib/vsprintf: add %*pg format specifier
fs: use gendisk->disk_name where possible
poll: plug an unused argument to do_poll
amdkfd: don't open-code memdup_user()
cdrom: don't open-code memdup_user()
rsxx: don't open-code memdup_user()
mtip32xx: don't open-code memdup_user()
[um] mconsole: don't open-code memdup_user_nul()
[um] hostaudio: don't open-code memdup_user()
...
Pull vfs xattr updates from Al Viro:
"Andreas' xattr cleanup series.
It's a followup to his xattr work that went in last cycle; -0.5KLoC"
* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
xattr handlers: Simplify list operation
ocfs2: Replace list xattr handler operations
nfs: Move call to security_inode_listsecurity into nfs_listxattr
xfs: Change how listxattr generates synthetic attributes
tmpfs: listxattr should include POSIX ACL xattrs
tmpfs: Use xattr handler infrastructure
btrfs: Use xattr handler infrastructure
vfs: Distinguish between full xattr names and proper prefixes
posix acls: Remove duplicate xattr name definitions
gfs2: Remove gfs2_xattr_acl_chmod
vfs: Remove vfs_xattr_cmp
When we do dquot readahead in log recovery, we do not use a verifier
as the underlying buffer may not have dquots in it. e.g. the
allocation operation hasn't yet been replayed. Hence we do not want
to fail recovery because we detect an operation to be replayed has
not been run yet. This problem was addressed for inodes in commit
d891400 ("xfs: inode buffers may not be valid during recovery
readahead") but the problem was not recognised to exist for dquots
and their buffers as the dquot readahead did not have a verifier.
The result of not using a verifier is that when the buffer is then
next read to replay a dquot modification, the dquot buffer verifier
will only be attached to the buffer if *readahead is not complete*.
Hence we can read the buffer, replay the dquot changes and then add
it to the delwri submission list without it having a verifier
attached to it. This then generates warnings in xfs_buf_ioapply(),
which catches and warns about this case.
Fix this and make it handle the same readahead verifier error cases
as for inode buffers by adding a new readahead verifier that has a
write operation as well as a read operation that marks the buffer as
not done if any corruption is detected. Also make sure we don't run
readahead if the dquot buffer has been marked as cancelled by
recovery.
This will result in readahead either succeeding and the buffer
having a valid write verifier, or readahead failing and the buffer
state requiring the subsequent read to resubmit the IO with the new
verifier. In either case, this will result in the buffer always
ending up with a valid write verifier on it.
Note: we also need to fix the inode buffer readahead error handling
to mark the buffer with EIO. Brian noticed the code I copied from
there wrong during review, so fix it at the same time. Add comments
linking the two functions that handle readahead verifier errors
together so we don't forget this behavioural link in future.
cc: <stable@vger.kernel.org> # 3.12 - current
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we do inode readahead in log recovery, we do can do the
readahead before we've replayed the icreate transaction that stamps
the buffer with inode cores. The inode readahead verifier catches
this and marks the buffer as !done to indicate that it doesn't yet
contain valid inodes.
In adding buffer error notification (i.e. setting b_error = -EIO at
the same time as as we clear the done flag) to such a readahead
verifier failure, we can then get subsequent inode recovery failing
with this error:
XFS (dm-0): metadata I/O error: block 0xa00060 ("xlog_recover_do..(read#2)") error 5 numblks 32
This occurs when readahead completion races with icreate item replay
such as:
inode readahead
find buffer
lock buffer
submit RA io
....
icreate recovery
xfs_trans_get_buffer
find buffer
lock buffer
<blocks on RA completion>
.....
<ra completion>
fails verifier
clear XBF_DONE
set bp->b_error = -EIO
release and unlock buffer
<icreate gains lock>
icreate initialises buffer
marks buffer as done
adds buffer to delayed write queue
releases buffer
At this point, we have an initialised inode buffer that is up to
date but has an -EIO state registered against it. When we finally
get to recovering an inode in that buffer:
inode item recovery
xfs_trans_read_buffer
find buffer
lock buffer
sees XBF_DONE is set, returns buffer
sees bp->b_error is set
fail log recovery!
Essentially, we need xfs_trans_get_buf_map() to clear the error status of
the buffer when doing a lookup. This function returns uninitialised
buffers, so the buffer returned can not be in an error state and
none of the code that uses this function expects b_error to be set
on return. Indeed, there is an ASSERT(!bp->b_error); in the
transaction case in xfs_trans_get_buf_map() that would have caught
this if log recovery used transactions....
This patch firstly changes the inode readahead failure to set -EIO
on the buffer, and secondly changes xfs_buf_get_map() to never
return a buffer with an error state set so this first change doesn't
cause unexpected log recovery failures.
cc: <stable@vger.kernel.org> # 3.12 - current
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Calls to xfs_bmap_finish() and xfs_trans_ijoin(), and the
associated comments were replicated several times across
the attribute code, all dealing with what to do if the
transaction was or wasn't committed.
And in that replicated code, an ASSERT() test of an
uninitialized variable occurs in several locations:
error = xfs_attr_thing(&args);
if (!error) {
error = xfs_bmap_finish(&args.trans, args.flist,
&committed);
}
if (error) {
ASSERT(committed);
If the first xfs_attr_thing() failed, we'd skip the xfs_bmap_finish,
never set "committed", and then test it in the ASSERT.
Fix this up by moving the committed state internal to xfs_bmap_finish,
and add a new inode argument. If an inode is passed in, it is passed
through to __xfs_trans_roll() and joined to the transaction there if
the transaction was committed.
xfs_qm_dqalloc() was a little unique in that it called bjoin rather
than ijoin, but as Dave points out we can detect the committed state
but checking whether (*tpp != tp).
Addresses-Coverity-Id: 102360
Addresses-Coverity-Id: 102361
Addresses-Coverity-Id: 102363
Addresses-Coverity-Id: 102364
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
For large sparse or fragmented files, checking every single entry in
the bmapbt on every operation is prohibitively expensive. Especially
as such checks rarely discover problems during normal operations on
high extent coutn files. Our regression tests don't tend to exercise
files with hundreds of thousands to millions of extents, so mostly
this isn't noticed.
However, trying to run things like xfs_mdrestore of large filesystem
dumps on a debug kernel quickly becomes impossible as the CPU is
completely burnt up repeatedly walking the sparse file bmapbt that
is generated for every allocation that is made.
Hence, if the file has more than 10,000 extents, just don't bother
with walking the tree to check it exhaustively. The btree code has
checks that ensure that the newly inserted/removed/modified record
is correctly ordered, so the entrie tree walk in thses cases has
limited additional value.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This allows us to see page cache driven readahead in action as it
passes through XFS. This helps to understand buffered read
throughput problems such as readahead IO IO sizes being too small
for the underlying device to reach max throughput.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS now uses CRC verification over a limited section of the log to
detect torn writes prior to a crash. This is difficult to test directly
due to the timing and hardware requirements to cause a short write.
Add a mechanism to inject CRC errors into log records to facilitate
testing torn write detection during log recovery. This mechanism is
dangerous and can result in filesystem corruption. Thus, it is only
available in DEBUG mode for testing/development purposes. Set a non-zero
value to the following sysfs entry to enable error injection:
/sys/fs/xfs/<dev>/log/log_badcrc_factor
Once enabled, XFS intentionally writes an invalid CRC to a log record at
some random point in the future based on the provided frequency. The
filesystem immediately shuts down once the record has been written to
the physical log to prevent metadata writeback (e.g., AIL insertion)
once the log write completes. This helps reasonably simulate a torn
write to the log as the affected record must be safe to discard. The
next mount after the intentional shutdown requires log recovery and
should detect and recover from the torn write.
Note again that this _will_ result in data loss or worse. For testing
and development purposes only!
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Certain types of storage, such as persistent memory, do not provide
sector atomicity for writes. This means that if a crash occurs while XFS
is writing log records, only part of those records might make it to the
storage. This is problematic because log recovery uses the cycle value
packed at the top of each log block to locate the head/tail of the log.
This can lead to CRC verification failures during log recovery and an
unmountable fs for a filesystem that is otherwise consistent.
Update log recovery to incorporate log record CRC verification as part
of the head/tail discovery process. Once the head is located via the
traditional algorithm, run a CRC-only pass over the records up to the
head of the log. If CRC verification fails, assume that the records are
torn as a matter of policy and trim the head block back to the start of
the first bad record.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Rather than just being able to turn DAX on and off via a mount
option, some applications may only want to enable DAX for certain
performance critical files in a filesystem.
This patch introduces a new inode flag to enable DAX in the v3 inode
di_flags2 field. It adds support for setting and clearing flags in
the di_flags2 field via the XFS_IOC_FSSETXATTR ioctl, and sets the
S_DAX inode flag appropriately when it is seen.
When this flag is set on a directory, it acts as an "inherit flag".
That is, inodes created in the directory will automatically inherit
the on-disk inode DAX flag, enabling administrators to set up
directory heirarchies that automatically use DAX. Setting this flag
on an empty root directory will make the entire filesystem use DAX
by default.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Now that the ioctls have been hoisted up to the VFS level, use
the VFs definitions directly and remove the XFS specific definitions
completely. Userspace is going to have to handle the change of this
interface separately, so removing the definitions from xfs_fs.h is
not an issue here at all.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Hoist the ioctl definitions for the XFS_IOC_FS[SG]SETXATTR API from
fs/xfs/libxfs/xfs_fs.h to include/uapi/linux/fs.h so that the ioctls
can be used by all filesystems, not just XFS. This enables
(initially) ext4 to use the ioctl to set project IDs on inodes.
Based-on-patch-from: Li Xi <lixi@ddn.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Doing a splice read (generic/249) generates a lockdep splat because
we recursively lock the inode iolock in this path:
SyS_sendfile64
do_sendfile
do_splice_direct
splice_direct_to_actor
do_splice_to
xfs_file_splice_read <<<<<< lock here
default_file_splice_read
vfs_readv
do_readv_writev
do_iter_readv_writev
xfs_file_read_iter <<<<<< then here
The issue here is that for DAX inodes we need to avoid the page
cache path and hence simply push it into the normal read path.
Unfortunately, we can't tell down at xfs_file_read_iter() whether we
are being called from the splice path and hence we cannot avoid the
locking at this layer. Hence we simply have to drop the inode
locking at the higher splice layer for DAX.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Commit 1ca1915 ("xfs: Don't use unwritten extents for DAX") enabled
the DAX allocation call to dip into the reserve pool in case it was
converting unwritten extents rather than allocating blocks. This was
a direct copy of the unwritten extent conversion code, but had an
unintended side effect of allowing normal data block allocation to
use the reserve pool. Hence normal block allocation could deplete
the reserve pool and prevent unwritten extent conversion at ENOSPC,
hence violating fallocate guarantees on preallocated space.
Fix it by checking whether the incoming map from __xfs_get_blocks()
spans an unwritten extent and only use the reserve pool if the
allocation covers an unwritten extent.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The return type "unsigned long" was used by the suffix_kstrtoint()
function even though it will eventually return a negative error code.
Improve this implementation detail by using the type "int" instead.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Create xfs_btree_sblock_verify() to verify short-format btree blocks
(i.e. the per-AG btrees with 32-bit block pointers) instead of
open-coding them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Because struct xfs_agfl is 36 bytes long and has a 64-bit integer
inside it, gcc will quietly round the structure size up to the nearest
64 bits -- in this case, 40 bytes. This results in the XFS_AGFL_SIZE
macro returning incorrect results for v5 filesystems on 64-bit
machines (118 items instead of 119). As a result, a 32-bit xfs_repair
will see garbage in AGFL item 119 and complain.
Therefore, tell gcc not to pad the structure so that the AGFL size
calculation is correct.
cc: <stable@vger.kernel.org> # 3.10 - 4.4
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Use a convenience variable instead of open-coding the inode fork.
This isn't really needed for now, but will become important when we
add the copy-on-write fork later.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Update the log ticket reservation type printing code to reflect
all the types of log tickets, to avoid incorrect debug output and
avoid running off the end of the array.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Since xfs_repair wants to use xfs_alloc_fix_freelist, remove the
static designation. xfsprogs already has this; this simply brings
the kernel up to date.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There are no callers of the xfs_buf_ioend_async() function outside
of the fs/xfs/xfs_buf.c. So, let's make it static.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Linux's quota subsystem has an ability to handle project quota. This
commit just utilizes the ability from xfs side. dbus-monitor and
quota_nld shipped as part of quota-tools can be used for testing.
See the patch posting on the XFS list for details on testing.
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In my earlier commit
c29aad4 xfs: pass mp to XFS_WANT_CORRUPTED_GOTO
I added some local mp variables with code which indicates that
mp might be NULL. Coverity doesn't like this now, because the
updated per-fs XFS_STATS macros dereference mp.
I don't think this is actually a problem; from what I can tell,
we cannot get to these functions with a null bma->tp, so my NULL
check was probably pointless. Still, it's not super obvious.
So switch this code to get mp from the inode on the xfs_bmalloca
structure, with no conditional, because the functions are already
using bmap->ip directly.
Addresses-Coverity-Id: 1339552
Addresses-Coverity-Id: 1339553
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This adds a name to each buf_ops structure, so that if
a verifier fails we can print the type of verifier that
failed it. Should be a slight debugging aid, I hope.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If there is any non zero bit in a long bitmap, it can jump out of the
loop and finish the function as soon as possible.
Signed-off-by: Jia He <hejianet@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
As part of the head/tail discovery process, log recovery locates the
head block and then reverse seeks to find the start of the last active
record in the log. This is non-trivial as the record itself could have
wrapped around the end of the physical log. Log recovery torn write
detection potentially needs to walk further behind the last record in
the log, as multiple log I/Os can be in-flight at one time during a
crash event.
Therefore, refactor the reverse log record header search mechanism into
a new helper that supports the ability to seek past an arbitrary number
of log records (or until the tail is hit). Update the head/tail search
mechanism to call the new helper, but otherwise there is no change in
log recovery behavior.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Log recovery torn write detection uses CRC verification over a range of
the active log to identify torn writes. Since the generic log recovery
pass code implements a superset of the functionality required for CRC
verification, it can be easily modified to support a CRC verification
only pass.
Create a new CRC pass type and update the log record processing helper
to skip everything beyond CRC verification when in this mode. This pass
will be invoked in subsequent patches to implement torn write detection.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Each log recovery pass walks from the tail block to the head block and
processes records appropriately based on the associated log pass type.
There are various failure conditions that can occur through this
sequence, such as I/O errors, CRC errors, etc. Log torn write detection
will perform CRC verification near the head of the log to detect torn
writes and trim torn records from the log appropriately.
As it is, xlog_do_recovery_pass() only returns an error code in the
event of CRC failure, which isn't enough information to trim the head of
the log. Update xlog_do_recovery_pass() to optionally return the start
block of the associated record when an error occurs. This patch contains
no functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Log record CRC verification currently occurs during active log recovery,
immediately before a log record is unpacked. Therefore, the CRC
calculation code is buried within the data unpack function. CRC
verification pass support only needs to go so far as check the CRC, but
this is not easily allowed as the code is currently organized.
Since we now have a new log record processing helper, pull the record
CRC verification code out from the unpack helper and open-code it at the
top of the new process helper. This facilitates the ability to modify
how records are processed based on the type of the current pass. This
patch contains no functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xlog_do_recovery_pass() duplicates a couple function calls related to
processing log records because the function must handle wrapping around
the end of the log if the head is behind the tail. This is implemented
as separate loops. CRC verification pass support will modify how records
are processed in both of these loops.
Rather than continue to duplicate code, factor the calls that process a
log record into a new helper and call that helper from both loops. This
patch contains no functional changes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS log records have separate fields for the record size and the iclog
size used to write the record. mkfs.xfs zeroes the log and writes an
unmount record to generate a clean log for the subsequent mount. The
userspace record logging code has a bug where the iclog size (h_size)
field of the log record is hardcoded to 32k, even if a log stripe unit
is specified. The log record length is correctly extended to the stripe
unit. Since the kernel log recovery code uses the h_size field to
determine the log buffer size, this means that the kernel can attempt to
read/process records larger than the buffer size and overrun the buffer.
This has historically not been a problem because the kernel doesn't
actually run through log recovery in the clean unmount case. Instead,
the kernel detects that a single unmount record exists between the head
and tail and pushes the tail forward such that the log is viewed as
clean (head == tail). Once CRC verification is enabled, however, all
records at the head of the log are verified for CRC errors and thus we
are susceptible to overrun problems if the iclog field is not correct.
While the core problem must be fixed in userspace, this is historical
behavior that must be detected in the kernel to avoid severe side
effects such as memory corruption and crashes. Update the log buffer
size calculation code to detect this condition, warn the user and resize
the log buffer based on the log stripe unit. Return a corruption error
in cases where this does not look like a clean filesystem (i.e., the log
record header indicates more than one operation).
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
new method: ->get_link(); replacement of ->follow_link(). The differences
are:
* inode and dentry are passed separately
* might be called both in RCU and non-RCU mode;
the former is indicated by passing it a NULL dentry.
* when called that way it isn't allowed to block
and should return ERR_PTR(-ECHILD) if it needs to be called
in non-RCU mode.
It's a flagday change - the old method is gone, all in-tree instances
converted. Conversion isn't hard; said that, so far very few instances
do not immediately bail out when called in RCU mode. That'll change
in the next commits.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instead of adding the synthesized POSIX ACL attribute names after listing all
non-synthesized attributes, generate them immediately when listing the
non-synthesized attributes.
In addition, merge xfs_xattr_put_listent and xfs_xattr_put_listent_sizes to
ensure that the list size is computed correctly; the split version was
overestimating the list size for non-root users.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: xfs@oss.sgi.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add an additional "name" field to struct xattr_handler. When the name
is set, the handler matches attributes with exactly that name. When the
prefix is set instead, the handler matches attributes with the given
prefix and with a non-empty suffix.
This patch should avoid bugs like the one fixed in commit c361016a in
the future.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove POSIX_ACL_XATTR_{ACCESS,DEFAULT} and GFS2_POSIX_ACL_{ACCESS,DEFAULT}
and replace them with the definitions in <include/uapi/linux/xattr.h>.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The xattr_handler operations are currently all passed a file system
specific flags value which the operations can use to disambiguate between
different handlers; some file systems use that to distinguish the xattr
namespace, for example. In some oprations, it would be useful to also have
access to the handler prefix. To allow that, pass a pointer to the handler
to operations instead of the flags value alone.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This update contains:
o per-mount operational statistics in sysfs
o fixes for concurrent aio append write submission
o various logging fixes
o detection of zeroed logs and invalid log sequence numbers on v5 filesystems
o memory allocation failure message improvements
o a bunch of xattr/ACL fixes
o fdatasync optimisation
o miscellaneous other fixes and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=zu+5
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs updates from Dave Chinner:
"There is nothing really major here - the only significant addition is
the per-mount operation statistics infrastructure. Otherwises there's
various ACL, xattr, DAX, AIO and logging fixes, and a smattering of
small cleanups and fixes elsewhere.
Summary:
- per-mount operational statistics in sysfs
- fixes for concurrent aio append write submission
- various logging fixes
- detection of zeroed logs and invalid log sequence numbers on v5 filesystems
- memory allocation failure message improvements
- a bunch of xattr/ACL fixes
- fdatasync optimisation
- miscellaneous other fixes and cleanups"
* tag 'xfs-for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (39 commits)
xfs: give all workqueues rescuer threads
xfs: fix log recovery op header validation assert
xfs: Fix error path in xfs_get_acl
xfs: optimise away log forces on timestamp updates for fdatasync
xfs: don't leak uuid table on rmmod
xfs: invalidate cached acl if set via ioctl
xfs: Plug memory leak in xfs_attrmulti_attr_set
xfs: Validate the length of on-disk ACLs
xfs: invalidate cached acl if set directly via xattr
xfs: xfs_filemap_pmd_fault treats read faults as write faults
xfs: add ->pfn_mkwrite support for DAX
xfs: DAX does not use IO completion callbacks
xfs: Don't use unwritten extents for DAX
xfs: introduce BMAPI_ZERO for allocating zeroed extents
xfs: fix inode size update overflow in xfs_map_direct()
xfs: clear PF_NOFREEZE for xfsaild kthread
xfs: fix an error code in xfs_fs_fill_super()
xfs: stats are no longer dependent on CONFIG_PROC_FS
xfs: simplify /proc teardown & error handling
xfs: per-filesystem stats counter implementation
...
The function currently called "__block_page_mkwrite()" used to be called
"block_page_mkwrite()" until a wrapper for this function was added by:
commit 24da4fab5a ("vfs: Create __block_page_mkwrite() helper passing
error values back")
This wrapper, the current "block_page_mkwrite()", is currently unused.
__block_page_mkwrite() is used directly by ext4, nilfs2 and xfs.
Remove the unused wrapper, rename __block_page_mkwrite() back to
block_page_mkwrite() and update the comment above block_page_mkwrite().
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.com>
Cc: Jan Kara <jack@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We're consistently hitting deadlocks here with XFS on recent kernels.
After some digging through the crash files, it looks like everyone in
the system is waiting for XFS to reclaim memory.
Something like this:
PID: 2733434 TASK: ffff8808cd242800 CPU: 19 COMMAND: "java"
#0 [ffff880019c53588] __schedule at ffffffff818c4df2
#1 [ffff880019c535d8] schedule at ffffffff818c5517
#2 [ffff880019c535f8] _xfs_log_force_lsn at ffffffff81316348
#3 [ffff880019c53688] xfs_log_force_lsn at ffffffff813164fb
#4 [ffff880019c536b8] xfs_iunpin_wait at ffffffff8130835e
#5 [ffff880019c53728] xfs_reclaim_inode at ffffffff812fd453
#6 [ffff880019c53778] xfs_reclaim_inodes_ag at ffffffff812fd8c7
#7 [ffff880019c53928] xfs_reclaim_inodes_nr at ffffffff812fe433
#8 [ffff880019c53958] xfs_fs_free_cached_objects at ffffffff8130d3b9
#9 [ffff880019c53968] super_cache_scan at ffffffff811a6f73
#10 [ffff880019c539c8] shrink_slab at ffffffff811460e6
#11 [ffff880019c53aa8] shrink_zone at ffffffff8114a53f
#12 [ffff880019c53b48] do_try_to_free_pages at ffffffff8114a8ba
#13 [ffff880019c53be8] try_to_free_pages at ffffffff8114ad5a
#14 [ffff880019c53c78] __alloc_pages_nodemask at ffffffff8113e1b8
#15 [ffff880019c53d88] alloc_kmem_pages_node at ffffffff8113e671
#16 [ffff880019c53dd8] copy_process at ffffffff8104f781
#17 [ffff880019c53ec8] do_fork at ffffffff8105129c
#18 [ffff880019c53f38] sys_clone at ffffffff810515b6
#19 [ffff880019c53f48] stub_clone at ffffffff818c8e4d
xfs_log_force_lsn is waiting for logs to get cleaned, which is waiting
for IO, which is waiting for workers to complete the IO which is waiting
for worker threads that don't exist yet:
PID: 2752451 TASK: ffff880bd6bdda00 CPU: 37 COMMAND: "kworker/37:1"
#0 [ffff8808d20abbb0] __schedule at ffffffff818c4df2
#1 [ffff8808d20abc00] schedule at ffffffff818c5517
#2 [ffff8808d20abc20] schedule_timeout at ffffffff818c7c6c
#3 [ffff8808d20abcc0] wait_for_completion_killable at ffffffff818c6495
#4 [ffff8808d20abd30] kthread_create_on_node at ffffffff8106ec82
#5 [ffff8808d20abdf0] create_worker at ffffffff8106752f
#6 [ffff8808d20abe40] worker_thread at ffffffff810699be
#7 [ffff8808d20abec0] kthread at ffffffff8106ef59
#8 [ffff8808d20abf50] ret_from_fork at ffffffff818c8ac8
I think we should be using WQ_MEM_RECLAIM to make sure this thread
pool makes progress when we're not able to allocate new workers.
[dchinner: make all workqueues WQ_MEM_RECLAIM]
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Commit 89cebc84 ("xfs: validate transaction header length on log
recovery") added additional validation of the on-disk op header length
to protect from buffer overflow during log recovery. It accounts for the
fact that the transaction header can be split across multiple op
headers. It added an assert for when this occurs that verifies the
length of the second part of a split transaction header is less than a
full transaction header. In other words, it expects that the first op
header of a split transaction header includes at least some portion of
the transaction header.
This expectation is not always valid as a zero-length op header can
exist for the first op header of a split transaction header (see
xlog_recover_add_to_trans() for details). This means that the second op
header can have a valid, full length transaction header and thus the
full header is copied in xlog_recover_add_to_cont_trans(). Fix the
assert in xlog_recover_add_to_cont_trans() to handle this case correctly
and require that the op header length is less than or equal to a full
transaction header.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Error codes from xfs_attr_get other than -ENOATTR were not properly
reported. Fix that.
In addition, the declaration of struct xfs_inode in xfs_acl.h isn't needed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
__GFP_WAIT has been used to identify atomic context in callers that hold
spinlocks or are in interrupts. They are expected to be high priority and
have access one of two watermarks lower than "min" which can be referred
to as the "atomic reserve". __GFP_HIGH users get access to the first
lower watermark and can be called the "high priority reserve".
Over time, callers had a requirement to not block when fallback options
were available. Some have abused __GFP_WAIT leading to a situation where
an optimisitic allocation with a fallback option can access atomic
reserves.
This patch uses __GFP_ATOMIC to identify callers that are truely atomic,
cannot sleep and have no alternative. High priority users continue to use
__GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and
are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify
callers that want to wake kswapd for background reclaim. __GFP_WAIT is
redefined as a caller that is willing to enter direct reclaim and wake
kswapd for background reclaim.
This patch then converts a number of sites
o __GFP_ATOMIC is used by callers that are high priority and have memory
pools for those requests. GFP_ATOMIC uses this flag.
o Callers that have a limited mempool to guarantee forward progress clear
__GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall
into this category where kswapd will still be woken but atomic reserves
are not used as there is a one-entry mempool to guarantee progress.
o Callers that are checking if they are non-blocking should use the
helper gfpflags_allow_blocking() where possible. This is because
checking for __GFP_WAIT as was done historically now can trigger false
positives. Some exceptions like dm-crypt.c exist where the code intent
is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to
flag manipulations.
o Callers that built their own GFP flags instead of starting with GFP_KERNEL
and friends now also need to specify __GFP_KSWAPD_RECLAIM.
The first key hazard to watch out for is callers that removed __GFP_WAIT
and was depending on access to atomic reserves for inconspicuous reasons.
In some cases it may be appropriate for them to use __GFP_HIGH.
The second key hazard is callers that assembled their own combination of
GFP flags instead of starting with something like GFP_KERNEL. They may
now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless
if it's missed in most cases as other activity will wake kswapd.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
xfs: timestamp updates cause excessive fdatasync log traffic
Sage Weil reported that a ceph test workload was writing to the
log on every fdatasync during an overwrite workload. Event tracing
showed that the only metadata modification being made was the
timestamp updates during the write(2) syscall, but fdatasync(2)
is supposed to ignore them. The key observation was that the
transactions in the log all looked like this:
INODE: #regs: 4 ino: 0x8b flags: 0x45 dsize: 32
And contained a flags field of 0x45 or 0x85, and had data and
attribute forks following the inode core. This means that the
timestamp updates were triggering dirty relogging of previously
logged parts of the inode that hadn't yet been flushed back to
disk.
There are two parts to this problem. The first is that XFS relogs
dirty regions in subsequent transactions, so it carries around the
fields that have been dirtied since the last time the inode was
written back to disk, not since the last time the inode was forced
into the log.
The second part is that on v5 filesystems, the inode change count
update during inode dirtying also sets the XFS_ILOG_CORE flag, so
on v5 filesystems this makes a timestamp update dirty the entire
inode.
As a result when fdatasync is run, it looks at the dirty fields in
the inode, and sees more than just the timestamp flag, even though
the only metadata change since the last fdatasync was just the
timestamps. Hence we force the log on every subsequent fdatasync
even though it is not needed.
To fix this, add a new field to the inode log item that tracks
changes since the last time fsync/fdatasync forced the log to flush
the changes to the journal. This flag is updated when we dirty the
inode, but we do it before updating the change count so it does not
carry the "core dirty" flag from timestamp updates. The fields are
zeroed when the inode is marked clean (due to writeback/freeing) or
when an fsync/datasync forces the log. Hence if we only dirty the
timestamps on the inode between fsync/fdatasync calls, the fdatasync
will not trigger another log force.
Over 100 runs of the test program:
Ext4 baseline:
runtime: 1.63s +/- 0.24s
avg lat: 1.59ms +/- 0.24ms
iops: ~2000
XFS, vanilla kernel:
runtime: 2.45s +/- 0.18s
avg lat: 2.39ms +/- 0.18ms
log forces: ~400/s
iops: ~1000
XFS, patched kernel:
runtime: 1.49s +/- 0.26s
avg lat: 1.46ms +/- 0.25ms
log forces: ~30/s
iops: ~1500
Reported-by: Sage Weil <sage@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Don't leak the UUID table when the module is unloaded.
(Found with kmemleak.)
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Setting or removing the "SGI_ACL_[FILE|DEFAULT]" attributes via the
XFS_IOC_ATTRMULTI_BY_HANDLE ioctl completely bypasses the POSIX ACL
infrastructure, like setting the "trusted.SGI_ACL_[FILE|DEFAULT]" xattrs
did until commit 6caa1056. Similar to that commit, invalidate cached
acls when setting/removing them via the ioctl as well.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When setting attributes via XFS_IOC_ATTRMULTI_BY_HANDLE, the user-space
buffer is copied into a new kernel-space buffer via memdup_user; that
buffer then isn't freed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In xfs_acl_from_disk, instead of trusting that xfs_acl.acl_cnt is correct,
make sure that the length of the attributes is correct as well. Also, turn
the aclp parameter into a const pointer.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
ACLs are stored as extended attributes of the inode to which they apply.
XFS converts the standard "system.posix_acl_[access|default]" attribute
names used to control ACLs to "trusted.SGI_ACL_[FILE|DEFAULT]" as stored
on-disk. These xattrs are directly exposed in on-disk format via
getxattr/setxattr, without any ACL aware code in the path to perform
validation, etc. This is partly historical and supports backup/restore
applications such as xfsdump to back up and restore the binary blob that
represents ACLs as-is.
Andreas reports that the ACLs observed via the getfacl interface is not
consistent when ACLs are set directly via the setxattr path. This occurs
because the ACLs are cached in-core against the inode and the xattr path
has no knowledge that the operation relates to ACLs.
Update the xattr set codepath to trap writes of the special XFS ACL
attributes and invalidate the associated cached ACL when this occurs.
This ensures that the correct ACLs are used on a subsequent operation
through the actual ACL interface.
Note that this does not update or add support for setting the ACL xattrs
directly beyond the restore use case that requires a correctly formatted
binary blob and to restore a consistent i_mode at the same time. It is
still possible for a root user to set an invalid or inconsistent (with
i_mode) ACL blob on-disk and potentially cause corruption.
[ With fixes from Andreas Gruenbacher. ]
Reported-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The code initially committed didn't have the same checks for write
faults as the dax_pmd_fault code and hence treats all faults as
write faults. We can get read faults through this path because they
is no pmd_mkwrite path for write faults similar to the normal page
fault path. Hence we need to ensure that we only do c/mtime updates
on write faults, and freeze protection is unnecessary for read
faults.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
->pfn_mkwrite support is needed so that when a page with allocated
backing store takes a write fault we can check that the fault has
not raced with a truncate and is pointing to a region beyond the
current end of file.
This also allows us to update the timestamp on the inode, too, which
fixes a generic/080 failure.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
For DAX, we are now doing block zeroing during allocation. This
means we no longer need a special DAX fault IO completion callback
to do unwritten extent conversion. Because mmap never extends the
file size (it SEGVs the process) we don't need a callback to update
the file size, either. Hence we can remove the completion callbacks
from the __dax_fault and __dax_mkwrite calls.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
DAX has a page fault serialisation problem with block allocation.
Because it allows concurrent page faults and does not have a page
lock to serialise faults to the same page, it can get two concurrent
faults to the page that race.
When two read faults race, this isn't a huge problem as the data
underlying the page is not changing and so "detect and drop" works
just fine. The issues are to do with write faults.
When two write faults occur, we serialise block allocation in
get_blocks() so only one faul will allocate the extent. It will,
however, be marked as an unwritten extent, and that is where the
problem lies - the DAX fault code cannot differentiate between a
block that was just allocated and a block that was preallocated and
needs zeroing. The result is that both write faults end up zeroing
the block and attempting to convert it back to written.
The problem is that the first fault can zero and convert before the
second fault starts zeroing, resulting in the zeroing for the second
fault overwriting the data that the first fault wrote with zeros.
The second fault then attempts to convert the unwritten extent,
which is then a no-op because it's already written. Data loss occurs
as a result of this race.
Because there is no sane locking construct in the page fault code
that we can use for serialisation across the page faults, we need to
ensure block allocation and zeroing occurs atomically in the
filesystem. This means we can still take concurrent page faults and
the only time they will serialise is in the filesystem
mapping/allocation callback. The page fault code will always see
written, initialised extents, so we will be able to remove the
unwritten extent handling from the DAX code when all filesystems are
converted.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
To enable DAX to do atomic allocation of zeroed extents, we need to
drive the block zeroing deep into the allocator. Because
xfs_bmapi_write() can return merged extents on allocation that were
only partially allocated (i.e. requested range spans allocated and
hole regions, allocation into the hole was contiguous), we cannot
zero the extent returned from xfs_bmapi_write() as that can
overwrite existing data with zeros.
Hence we have to drive the extent zeroing into the allocation code,
prior to where we merge the extents into the BMBT and return the
resultant map. This means we need to propagate this need down to
the xfs_alloc_vextent() and issue the block zeroing at this point.
While this functionality is being introduced for DAX, there is no
reason why it is specific to DAX - we can per-zero blocks during the
allocation transaction on any type of device. It's just slow (and
usually slower than unwritten allocation and conversion) on
traditional block devices so doesn't tend to get used. We can,
however, hook hardware zeroing optimisations via sb_issue_zeroout()
to this operation, so it may be useful in future and hence the
"allocate zeroed blocks" API needs to be implementation neutral.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Both direct IO and DAX pass an offset and count into get_blocks that
will overflow a s64 variable when an IO goes into the last supported
block in a file (i.e. at offset 2^63 - 1FSB bytes). This can be seen
from the tracing:
xfs_get_blocks_alloc: [...] offset 0x7ffffffffffff000 count 4096
xfs_gbmap_direct: [...] offset 0x7ffffffffffff000 count 4096
xfs_gbmap_direct_none:[...] offset 0x7ffffffffffff000 count 4096
0x7ffffffffffff000 + 4096 = 0x8000000000000000, and hence that
overflows the s64 offset and we fail to detect the need for a
filesize update and an ioend is not allocated.
This is *mostly* avoided for direct IO because such extending IOs
occur with full block allocation, and so the "IS_UNWRITTEN()" check
still evaluates as true and we get an ioend that way. However, doing
single sector extending IOs to this last block will expose the fact
that file size updates will not occur after the first allocating
direct IO as the overflow will then be exposed.
There is one further complexity: the DAX page fault path also
exposes the same issue in block allocation. However, page faults
cannot extend the file size, so in this case we want to allocate the
block but do not want to allocate an ioend to enable file size
update at IO completion. Hence we now need to distinguish between
the direct IO patch allocation and dax fault path allocation to
avoid leaking ioend structures.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Since xfsaild has been converted to kthread in 0030807c, it calls
try_to_freeze() during every AIL push iteration. It however doesn't set
itself as freezable, and therefore this try_to_freeze() will never do
anything.
Before (hopefully eventually) kthread freezing gets converted to fileystem
freezing, we'd rather mark xfsaild freezable (as it can generate I/O
during suspend).
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If alloc_percpu() fails, we accidentally return PTR_ERR(NULL), which
means success, but we intended to return -ENOMEM.
Fixes: 225e463558 ('xfs: per-filesystem stats in sysfs')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
So we need to fix the makefile to understand this, otherwise build
errors with CONFIG_PROC_FS=n occur.
Reported-and-tested-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
remove_proc_subtree() was added in 3.9, and can be
used to simplify our procfile creation error handling
and cleanup, removing the nested gotos. It simply
removes fs/xfs and everything created under it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch modifies the stats counting macros and the callers
to those macros to properly increment, decrement, and add-to
the xfs stats counts. The counts for global and per-fs stats
are correctly advanced, and cleared by writing a "1" to the
corresponding clear file.
global counts: /sys/fs/xfs/stats/stats
per-fs counts: /sys/fs/xfs/sda*/stats/stats
global clear: /sys/fs/xfs/stats/stats_clear
per-fs clear: /sys/fs/xfs/sda*/stats/stats_clear
[dchinner: cleaned up macro variables, removed CONFIG_FS_PROC around
stats structures and macros. ]
Signed-off-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch implements per-filesystem stats objects in sysfs. It
depends on the application of the previous patch series that
develops the infrastructure to support both xfs global stats and
xfs per-fs stats in sysfs.
Stats objects are instantiated when an xfs filesystem is mounted
and deleted on unmount. With this patch, the stats directory is
created and populated with the familiar stats and stats_clear files.
Example:
/sys/fs/xfs/sda9/stats/stats
/sys/fs/xfs/sda9/stats/stats_clear
With this patch, the individual counts within the new per-fs
stats file(s) remain at zero. Functions that use the the macros
to increment, decrement, and add-to the per-fs stats counts will
be covered in a separate new patch to follow this one. Note that
the counts within the global stats file (/sys/fs/xfs/stats/stats)
advance normally and can be cleared as it was prior to this patch.
[dchinner: move setup/teardown to xfs_fs_{fill|put}_super() so
it is down before/after any path that uses the per-mount stats. ]
Signed-off-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In an effort to get more useful out of "possible memory
allocation deadlock" messages, print the size of the
requested allocation, and dump the stack if the xfs error
level is tuned high.
The stack dump is implemented in define_xfs_printk_level()
for error levels >= LOGLEVEL_ERR, partly because it
seems generically useful, and also because kmem.c has
no knowledge of xfs error level tunables or other such bits,
it's very kmem-specific.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The gcc undefined behavior sanitizer caught this; surely
any sane memcpy implementation will no-op if size == 0,
but behavior with a *src of NULL is technically undefined
(declared nonnull), so avoid it here.
We are actually in this situation frequently via
xlog_commit_record(), because:
struct xfs_log_iovec reg = {
.i_addr = NULL,
.i_len = 0,
.i_type = XLOG_REG_TYPE_COMMIT,
};
Reported-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The total field from struct xfs_alloc_arg is a bit of an unknown
commodity. It is documented as the total block requirement for the
transaction and is used in this manner from most call sites by virtue of
passing the total block reservation of the transaction associated with
an allocation. Several xfs_bmapi_write() callers pass hardcoded values
of 0 or 1 for the total block requirement, which is a historical oddity
without any clear reasoning.
The xfs_iomap_write_direct() caller, for example, passes 0 for the total
block requirement. This has been determined to cause problems in the
form of ABBA deadlocks of AGF buffers due to incorrect AG selection in
the block allocator. Specifically, the xfs_alloc_space_available()
function incorrectly selects an AG that doesn't actually have sufficient
space for the allocation. This occurs because the args.total field is 0
and thus the remaining free space check on the AG doesn't actually
consider the size of the allocation request. This locks the AGF buffer,
the allocation attempt proceeds and ultimately fails (in
xfs_alloc_fix_minleft()), and xfs_alloc_vexent() moves on to the next
AG. In turn, this can lead to incorrect AG locking order (if the
allocator wraps around, attempting to lock AG 0 after acquiring AG N)
and thus deadlock if racing with another operation. This problem has
been reproduced via generic/299 on smallish (1GB) ramdisk test devices.
To avoid this problem, replace the undocumented hardcoded total
parameters from the iomap and utility callers to pass the block
reservation used for the associated transaction. This is consistent with
other xfs_bmapi_write() callers throughout XFS. The assumption is that
the total field allows the selection of an AG that can handle the entire
operation rather than simply the allocation/range being requested (e.g.,
resulting btree splits, etc.). This addresses the aforementioned
generic/299 hang by ensuring AG selection only occurs when the
allocation can be satisfied by the AG.
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently, we depends on Linux XATTR value for on disk
definition. Which causes trouble on other platforms and
maybe also if this value was to change.
Fix it by creating a custom definition independent from
those in Linux (although with the same values), so it is OK
with the be16 fields used for holding these attributes.
This patch reflects a change in xfsprogs.
Signed-off-by: Jan Tulak <jtulak@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Remove a hard dependency of Linux XATTR_LIST_MAX value by using
a prefixed version. This patch reflects the same change in xfsprogs.
Signed-off-by: Jan Tulak <jtulak@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Just fix two typos in code comments.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add a tracepoint in xfs_zero_eof() to facilitate tracking and debugging
EOF zeroing events. This has proven useful in the context of other
direct I/O tracepoints to ensure EOF zeroing occurs within appropriate
file ranges.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS supports and typically allows concurrent asynchronous direct I/O
submission to a single file. One exception to the rule is that file
extending dio writes that start beyond the current EOF (e.g.,
potentially create a hole at EOF) require exclusive I/O access to the
file. This is because such writes must zero any pre-existing blocks
beyond EOF that are exposed by virtue of now residing within EOF as a
result of the write about to be submitted.
Before EOF zeroing can occur, the current file i_size must be stabilized
to avoid data corruption. In this scenario, XFS upgrades the iolock to
exclude any further I/O submission, waits on in-flight I/O to complete
to ensure i_size is up to date (i_size is updated on dio write
completion) and restarts the various checks against the state of the
file. The problem is that this protection sequence is triggered only
when the iolock is currently held shared. While this is true for async
dio in most cases, the caller may upgrade the lock in advance based on
arbitrary circumstances with respect to EOF zeroing. For example, the
iolock is always acquired exclusively if the start offset is not block
aligned. This means that even though the iolock is already held
exclusive for such I/Os, pending I/O is not drained and thus EOF zeroing
can occur based on an unstable i_size.
This problem has been reproduced as guest data corruption in virtual
machines with file-backed qcow2 virtual disks hosted on an XFS
filesystem. The virtual disks must be configured with aio=native mode
and the must not be truncated out to the maximum file size (as some virt
managers will do).
Update xfs_file_aio_write_checks() to unconditionally drain in-flight
dio before EOF zeroing can occur. Rather than trigger the wait based on
iolock state, use a new flag and upgrade the iolock when necessary. Note
that this results in a full restart of the inode checks even when the
iolock was already held exclusive when technically it is only required
to recheck i_size. This should be a rare enough occurrence that it is
preferable to keep the code simple rather than create an alternate
restart jump target.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Since the onset of v5 superblocks, the LSN of the last modification has
been included in a variety of on-disk data structures. This LSN is used
to provide log recovery ordering guarantees (e.g., to ensure an older
log recovery item is not replayed over a newer target data structure).
While this works correctly from the point a filesystem is formatted and
mounted, userspace tools have some problematic behaviors that defeat
this mechanism. For example, xfs_repair historically zeroes out the log
unconditionally (regardless of whether corruption is detected). If this
occurs, the LSN of the filesystem is reset and the log is now in a
problematic state with respect to on-disk metadata structures that might
have a larger LSN. Until either the log catches up to the highest
previously used metadata LSN or each affected data structure is modified
and written out without incident (which resets the metadata LSN), log
recovery is susceptible to filesystem corruption.
This problem is ultimately addressed and repaired in the associated
userspace tools. The kernel is still responsible to detect the problem
and notify the user that something is wrong. Check the superblock LSN at
mount time and fail the mount if it is invalid. From that point on,
trigger verifier failure on any metadata I/O where an invalid LSN is
detected. This results in a filesystem shutdown and guarantees that we
do not log metadata changes with invalid LSNs on disk. Since this is a
known issue with a known recovery path, present a warning to instruct
the user how to recover.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch adds comm name and pid to warning messages printed by
kmem_alloc(), kmem_zone_alloc() and xfs_buf_allocate_memory().
This will help telling which memory allocations (e.g. kernel worker
threads, OOM victim tasks, neither) are stalling because these functions
are passing __GFP_NOWARN which suppresses not only backtrace but comm name
and pid.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
A local format symlink inode is converted to extent format when an
extended attribute is set on an inode as part of the attribute fork
creation. This means a block is allocated, the local symlink target name
is copied to the block and the block is logged. Currently,
xfs_bmap_local_to_extents() handles logging the remote block data based
on the size of the data fork prior to the conversion. This is not
correct on v5 superblock filesystems, which add an additional header to
remote symlink blocks that is nonexistent in local format inodes.
As a result, the full length of the remote symlink block content is not
logged. This can lead to corruption should a crash occur and log
recovery replay this transaction.
Since a callout is already used to initialize the new remote symlink
block, update the local-to-extents conversion mechanism to make the
callout also responsible for logging the block. It is already required
to set the log buffer type and format the block appropriately based on
the superblock version. This ensures the remote symlink is always logged
correctly. Note that xfs_bmap_local_to_extents() is only called for
symlinks so there are no other callouts that require modification.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The iomap codepath (via get_blocks()) acquires and release the inode
lock in the case of a direct write that requires block allocation. This
is because xfs_iomap_write_direct() allocates a transaction, which means
the ilock must be dropped and reacquired after the transaction is
allocated and reserved.
xfs_iomap_write_direct() invokes xfs_iomap_eof_align_last_fsb() before
the transaction is created and thus before the ilock is reacquired. This
can lead to calls to xfs_iread_extents() and reads of the in-core extent
list without any synchronization (via xfs_bmap_eof() and
xfs_bmap_last_extent()). xfs_iread_extents() assert fails if the ilock
is not held, but this is not currently seen in practice as the current
callers had already invoked xfs_bmapi_read().
What has been seen in practice are reports of crashes down in the
xfs_bmap_eof() codepath on direct writes due to seemingly bogus pointer
references from xfs_iext_get_ext(). While an explicit reproducer is not
currently available to confirm the cause of the problem, crash analysis
and code inspection from David Jeffrey had identified the insufficient
locking.
xfs_iomap_eof_align_last_fsb() is called from other contexts with the
inode lock already held, so we cannot acquire it therein.
__xfs_get_blocks() acquires and drops the ilock with variable flags to
cover the event that the extent list must be read in. The common case is
that __xfs_get_blocks() acquires the shared ilock. To provide locking
around the last extent alignment call without adding more lock cycles to
the dio path, update xfs_iomap_write_direct() to expect the shared ilock
held on entry and do the extent alignment under its protection. Demote
the lock, if necessary, from __xfs_get_blocks() and push the
xfs_qm_dqattach() call outside of the shared lock critical section.
Also, add an assert to document that the extent list is always expected
to be present in this path. Otherwise, we risk a call to
xfs_iread_extents() while under the shared ilock. This is safe as all
current callers have executed an xfs_bmapi_read() call under the current
iolock context.
Reported-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When I ran xfstest/073 case, the remount process was blocked to wait
transactions to be zero. I found there was a io error happened, and
the setfilesize transaction was not released properly. We should add
the changes to cancel the io error in this case.
Reproduction steps:
1. dd if=/dev/zero of=xfs1.img bs=1M count=2048
2. mkfs.xfs xfs1.img
3. losetup -f ./xfs1.img /dev/loop0
4. mount -t xfs /dev/loop0 /home/test_dir/
5. mkdir /home/test_dir/test
6. mkfs.xfs -dfile,name=image,size=2g
7. mount -t xfs -o loop image /home/test_dir/test
8. cp a file bigger than 2g to /home/test_dir/test
9. mount -t xfs -o remount,ro /home/test_dir/test
[ dchinner: moved io error detection to xfs_setfilesize_ioend() after
transaction context restoration. ]
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch is the next step toward per-fs xfs stats. The patch makes
the show and clear routines able to handle any stats structure
associated with a kobject.
Instead of a single global xfsstats structure, add kobject and a pointer
to a per-cpu struct xfsstats. Modify the macros that manipulate the stats
accordingly: XFS_STATS_INC, XFS_STATS_DEC, and XFS_STATS_ADD now access
xfsstats->xs_stats.
The sysfs functions need to get from the kobject back to the xfsstats
structure which contains it, and pass the pointer to the ->xs_stats
percpu structure into the show & clear routines.
Signed-off-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
As a part of the series to move xfs global stats from procfs to sysfs,
this patch consolidates the sysfs ops functions and removes redundancy.
Signed-off-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
As a part of the work to move xfs global stats from procfs to sysfs,
this patch removes the now unused procfs code that was xfs stat specific.
Signed-off-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
As a part of the work to move xfs global stats from procfs to sysfs,
this patch creates the symlink from proc/fs/xfs/stat to sys/fs/xfs/stats.
Signed-off-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently, xfs global stats are in procfs. This patch introduces
(replicates) the global stats in sysfs. Additionally a stats_clear file
is introduced in sysfs.
Signed-off-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Use DAX to provide support for huge pages.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order to handle the !CONFIG_TRANSPARENT_HUGEPAGES case, we need to
return VM_FAULT_FALLBACK from the inlined dax_pmd_fault(), which is
defined in linux/mm.h. Given that we don't want to include <linux/mm.h>
in <linux/fs.h>, the easiest solution is to move the DAX-related
functions to a new header, <linux/dax.h>. We could also have moved
VM_FAULT_* definitions to a new header, or a different header that isn't
quite such a boil-the-ocean header as <linux/mm.h>, but this felt like
the best option.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This update contains:
o large rework of EFI/EFD lifecycle handling to fix log recovery corruption
issues, crashes and unmount hangs
o separate metadata UUID on disk to enable changing boot label UUID for v5
filesystems
o fixes for gcc miscompilation on certain platforms and optimisation levels
o remote attribute allocation and recovery corruption fixes
o inode lockdep annotation rework to fix bugs with too many subclasses
o directory inode locking changes to prevent lockdep false positives
o a handful of minor corruption fixes
o various other small cleanups and bug fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Eikc
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs updates from Dave Chinner:
"There isn't a whole lot to this update - it's mostly bug fixes and
they are spread pretty much all over XFS. There are some corruption
fixes, some fixes for log recovery, some fixes that prevent unount
from hanging, a lockdep annotation rework for inode locking to prevent
false positives and the usual random bunch of cleanups and minor
improvements.
Deatils:
- large rework of EFI/EFD lifecycle handling to fix log recovery
corruption issues, crashes and unmount hangs
- separate metadata UUID on disk to enable changing boot label UUID
for v5 filesystems
- fixes for gcc miscompilation on certain platforms and optimisation
levels
- remote attribute allocation and recovery corruption fixes
- inode lockdep annotation rework to fix bugs with too many
subclasses
- directory inode locking changes to prevent lockdep false positives
- a handful of minor corruption fixes
- various other small cleanups and bug fixes"
* tag 'xfs-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (42 commits)
xfs: fix error gotos in xfs_setattr_nonsize
xfs: add mssing inode cache attempts counter increment
xfs: return errors from partial I/O failures to files
libxfs: bad magic number should set da block buffer error
xfs: fix non-debug build warnings
xfs: collapse allocsize and biosize mount option handling
xfs: Fix file type directory corruption for btree directories
xfs: lockdep annotations throw warnings on non-debug builds
xfs: Fix uninitialized return value in xfs_alloc_fix_freelist()
xfs: inode lockdep annotations broke non-lockdep build
xfs: flush entire file on dio read/write to cached file
xfs: Fix xfs_attr_leafblock definition
libxfs: readahead of dir3 data blocks should use the read verifier
xfs: stop holding ILOCK over filldir callbacks
xfs: clean up inode lockdep annotations
xfs: swap leaf buffer into path struct atomically during path shift
xfs: relocate sparse inode mount warning
xfs: dquots should be stamped with sb_meta_uuid
xfs: log recovery needs to validate against sb_meta_uuid
xfs: growfs not aware of sb_meta_uuid
...
Pull vfs updates from Al Viro:
"In this one:
- d_move fixes (Eric Biederman)
- UFS fixes (me; locking is mostly sane now, a bunch of bugs in error
handling ought to be fixed)
- switch of sb_writers to percpu rwsem (Oleg Nesterov)
- superblock scalability (Josef Bacik and Dave Chinner)
- swapon(2) race fix (Hugh Dickins)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (65 commits)
vfs: Test for and handle paths that are unreachable from their mnt_root
dcache: Reduce the scope of i_lock in d_splice_alias
dcache: Handle escaped paths in prepend_path
mm: fix potential data race in SyS_swapon
inode: don't softlockup when evicting inodes
inode: rename i_wb_list to i_io_list
sync: serialise per-superblock sync operations
inode: convert inode_sb_list_lock to per-sb
inode: add hlist_fake to avoid the inode hash lock in evict
writeback: plug writeback at a high level
change sb_writers to use percpu_rw_semaphore
shift percpu_counter_destroy() into destroy_super_work()
percpu-rwsem: kill CONFIG_PERCPU_RWSEM
percpu-rwsem: introduce percpu_rwsem_release() and percpu_rwsem_acquire()
percpu-rwsem: introduce percpu_down_read_trylock()
document rwsem_release() in sb_wait_write()
fix the broken lockdep logic in __sb_start_write()
introduce __sb_writers_{acquired,release}() helpers
ufs_inode_get{frag,block}(): get rid of 'phys' argument
ufs_getfrag_block(): tidy up a bit
...
Many file systems that implement the show_options hook fail to correctly
escape their output which could lead to unescaped characters (e.g. new
lines) leaking into /proc/mounts and /proc/[pid]/mountinfo files. This
could lead to confusion, spoofed entries (resulting in things like
systemd issuing false d-bus "mount" notifications), and who knows what
else. This looks like it would only be the root user stepping on
themselves, but it's possible weird things could happen in containers or
in other situations with delegated mount privileges.
Here's an example using overlay with setuid fusermount trusting the
contents of /proc/mounts (via the /etc/mtab symlink). Imagine the use
of "sudo" is something more sneaky:
$ BASE="ovl"
$ MNT="$BASE/mnt"
$ LOW="$BASE/lower"
$ UP="$BASE/upper"
$ WORK="$BASE/work/ 0 0
none /proc fuse.pwn user_id=1000"
$ mkdir -p "$LOW" "$UP" "$WORK"
$ sudo mount -t overlay -o "lowerdir=$LOW,upperdir=$UP,workdir=$WORK" none /mnt
$ cat /proc/mounts
none /root/ovl/mnt overlay rw,relatime,lowerdir=ovl/lower,upperdir=ovl/upper,workdir=ovl/work/ 0 0
none /proc fuse.pwn user_id=1000 0 0
$ fusermount -u /proc
$ cat /proc/mounts
cat: /proc/mounts: No such file or directory
This fixes the problem by adding new seq_show_option and
seq_show_option_n helpers, and updating the vulnerable show_option
handlers to use them as needed. Some, like SELinux, need to be open
coded due to unusual existing escape mechanisms.
[akpm@linux-foundation.org: add lost chunk, per Kees]
[keescook@chromium.org: seq_show_option should be using const parameters]
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Cc: J. R. Okajima <hooanon05g@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull core block updates from Jens Axboe:
"This first core part of the block IO changes contains:
- Cleanup of the bio IO error signaling from Christoph. We used to
rely on the uptodate bit and passing around of an error, now we
store the error in the bio itself.
- Improvement of the above from myself, by shrinking the bio size
down again to fit in two cachelines on x86-64.
- Revert of the max_hw_sectors cap removal from a revision again,
from Jeff Moyer. This caused performance regressions in various
tests. Reinstate the limit, bump it to a more reasonable size
instead.
- Make /sys/block/<dev>/queue/discard_max_bytes writeable, by me.
Most devices have huge trim limits, which can cause nasty latencies
when deleting files. Enable the admin to configure the size down.
We will look into having a more sane default instead of UINT_MAX
sectors.
- Improvement of the SGP gaps logic from Keith Busch.
- Enable the block core to handle arbitrarily sized bios, which
enables a nice simplification of bio_add_page() (which is an IO hot
path). From Kent.
- Improvements to the partition io stats accounting, making it
faster. From Ming Lei.
- Also from Ming Lei, a basic fixup for overflow of the sysfs pending
file in blk-mq, as well as a fix for a blk-mq timeout race
condition.
- Ming Lin has been carrying Kents above mentioned patches forward
for a while, and testing them. Ming also did a few fixes around
that.
- Sasha Levin found and fixed a use-after-free problem introduced by
the bio->bi_error changes from Christoph.
- Small blk cgroup cleanup from Viresh Kumar"
* 'for-4.3/core' of git://git.kernel.dk/linux-block: (26 commits)
blk: Fix bio_io_vec index when checking bvec gaps
block: Replace SG_GAPS with new queue limits mask
block: bump BLK_DEF_MAX_SECTORS to 2560
Revert "block: remove artifical max_hw_sectors cap"
blk-mq: fix race between timeout and freeing request
blk-mq: fix buffer overflow when reading sysfs file of 'pending'
Documentation: update notes in biovecs about arbitrarily sized bios
block: remove bio_get_nr_vecs()
fs: use helper bio_add_page() instead of open coding on bi_io_vec
block: kill merge_bvec_fn() completely
md/raid5: get rid of bio_fits_rdev()
md/raid5: split bio for chunk_aligned_read
block: remove split code in blkdev_issue_{discard,write_same}
btrfs: remove bio splitting and merge_bvec_fn() calls
bcache: remove driver private bio splitting code
block: simplify bio_add_page()
block: make generic_make_request handle arbitrarily sized bios
blk-cgroup: Drop unlikely before IS_ERR(_OR_NULL)
block: don't access bio->bi_error after bio_put()
block: shrink struct bio down to 2 cache lines again
...
As the code stands today, if xfs_trans_reserve() fails, we
goto out_dqrele, which does not free the allocated transaction.
Fix up the goto targets to undo everything properly.
Addresses-Coverity-Id: 145571
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Increasing the inode cache attempt counter was apparently dropped while
refactoring the cache code and so stayed at the initial 0 value. Add the
increment back to make the runtime stats more useful.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There is an issue with xfs's error reporting in some cases of I/O partially
failing and partially succeeding. Calls like fsync() can report success even
though not all I/O was successful in partial-failure cases such as one disk of
a RAID0 array being offline.
The issue can occur when there are more than one bio per xfs_ioend struct.
Each call to xfs_end_bio() for a bio completing will write a value to
ioend->io_error. If a successful bio completes after any failed bio, no
error is reported do to it writing 0 over the error code set by any failed bio.
The I/O error information is now lost and when the ioend is completed
only success is reported back up the filesystem stack.
xfs_end_bio() should only set ioend->io_error in the case of BIO_UPTODATE
being clear. ioend->io_error is initialized to 0 at allocation so only needs
to be updated by a failed bio. Also check that ioend->io_error is 0 so that
the first error reported will be the error code returned.
Cc: stable@vger.kernel.org
Signed-off-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If xfs_da3_node_read_verify() doesn't recognize the magic number of a
buffer it's just read, set the buffer error to -EFSCORRUPTED so that
the error can be sent up to userspace. Without this patch we'll
notice the bad magic eventually while trying to traverse or change
the block, but we really ought to fail early in the verifier.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There seem to be a couple of new set-but-unused build warnings
that gcc 4.9.3 is now warning about. These are not regressions, just
the compiler being more picky.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The allocsize and biosize mount options are handled identically,
other than allocsize accepting suffixes. suffix_kstrtoint handles
bare numbers just fine too, so these can be collapsed.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Users have occasionally reported that file type for some directory
entries is wrong. This mostly happened after updating libraries some
libraries. After some debugging the problem was traced down to
xfs_dir2_node_replace(). The function uses args->filetype as a file type
to store in the replaced directory entry however it also calls
xfs_da3_node_lookup_int() which will store file type of the current
directory entry in args->filetype. Thus we fail to change file type of a
directory entry to a proper type.
Fix the problem by storing new file type in a local variable before
calling xfs_da3_node_lookup_int().
cc: <stable@vger.kernel.org> # 3.16 - 4.x
Reported-by: Giacomo Comes <comes@naic.edu>
Signed-off-by: Jan Kara <jack@suse.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
SO, now if we enable lockdep without enabling CONFIG_XFS_DEBUG,
the lockdep annotations throw a warning because the assert that uses
the lockdep define is not built in:
fs/xfs/xfs_inode.c:367:1: warning: 'xfs_lockdep_subclass_ok' defined but not used [-Wunused-function]
xfs_lockdep_subclass_ok(
So now we need to create an ifdef mess to sort this all out, because
we need to handle all the combinations of CONFIG_XFS_DEBUG=[y|n],
CONFIG_XFS_WARNING=[y|n] and CONFIG_LOCKDEP=[y|n] appropriately.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_alloc_fix_freelist() can sometimes jump to out_agbp_relse
without ever setting value of 'error' variable which is then
returned. This can happen e.g. when pag->pagf_init is set but AG is
for metadata and we want to allocate user data.
Fix the problem by initializing 'error' to 0, which is the desired
return value when we decide to skip this group.
CC: xfs@oss.sgi.com
Coverity-id: 1309714
Signed-off-by: Jan Kara <jack@suse.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Fix CONFIG_LOCKDEP=n build, because asserts I put in to ensure we
aren't overrunning lockdep subclasses in commit 0952c81 ("xfs:
clean up inode lockdep annotations") use a define that doesn't
exist when CONFIG_LOCKDEP=n
Only check the subclass limits when lockdep is actually enabled.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Filesystems are responsible to manage file coherency between the page
cache and direct I/O. The generic dio code flushes dirty pages over the
range of a dio to ensure that the dio read or a future buffered read
returns the correct data. XFS has generally followed this pattern,
though traditionally has flushed and invalidated the range from the
start of the I/O all the way to the end of the file. This changed after
the following commit:
7d4ea3ce xfs: use ranged writeback and invalidation for direct IO
... as the full file flush was no longer necessary to deal with the
strange post-eof delalloc issues that were since fixed. Unfortunately,
we have since received complaints about performance degradation due to
the increased exclusive iolock cycles (which locks out parallel dio
submission) that occur when a file has cached pages. This does not occur
on filesystems that use the generic code as it also does not incorporate
locking.
The exclusive iolock is acquired any time the inode mapping has cached
pages, regardless of whether they reside in the range of the I/O or not.
If not, the flush/inval calls do no work and the lock was cycled for no
reason.
Under consideration of the cost of the exclusive iolock, update the dio
read and write handlers to flush and invalidate the entire mapping when
cached pages exist. In most cases, this increases the cost of the
initial flush sequence but eliminates the need for further lock cycles
and flushes so long as the workload does not actively mix direct and
buffered I/O. This also more closely matches historical behavior and
performance characteristics that users have come to expect.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
struct xfs_attr_leafblock contains 'entries' array which is declared
with size 1 altough it can in fact contain much more entries. Since this
array is followed by further struct members, gcc (at least in version
4.8.3) thinks that the array has the fixed size of 1 element and thus
may optimize away all accesses beyond the end of array resulting in
non-working code. This problem was only observed with userspace code in
xfsprogs, however it's better to be safe in kernel as well and have
matching kernel and xfsprogs definitions.
cc: <stable@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In the dir3 data block readahead function, use the regular read
verifier to check the block's CRC and spot-check the block contents
instead of directly calling only the spot-checking routine. This
prevents corrupted directory data blocks from being read into the
kernel, which can lead to garbage ls output and directory loops (if
say one of the entries contains slashes and other junk).
cc: <stable@vger.kernel.org> # 3.12 - 4.2
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The recent change to the readdir locking made in 40194ec ("xfs:
reinstate the ilock in xfs_readdir") for CXFS directory sanity was
probably the wrong thing to do. Deep in the readdir code we
can take page faults in the filldir callback, and so taking a page
fault while holding an inode ilock creates a new set of locking
issues that lockdep warns all over the place about.
The locking order for regular inodes w.r.t. page faults is io_lock
-> pagefault -> mmap_sem -> ilock. The directory readdir code now
triggers ilock -> page fault -> mmap_sem. While we cannot deadlock
at this point, it inverts all the locking patterns that lockdep
normally sees on XFS inodes, and so triggers lockdep. We worked
around this with commit 93a8614 ("xfs: fix directory inode iolock
lockdep false positive"), but that then just moved the lockdep
warning to deeper in the page fault path and triggered on security
inode locks. Fixing the shmem issue there just moved the lockdep
reports somewhere else, and now we are getting false positives from
filesystem freezing annotations getting confused.
Further, if we enter memory reclaim in a readdir path, we now get
lockdep warning about potential deadlocks because the ilock is held
when we enter reclaim. This, again, is different to a regular file
in that we never allow memory reclaim to run while holding the ilock
for regular files. Hence lockdep now throws
ilock->kmalloc->reclaim->ilock warnings.
Basically, the problem is that the ilock is being used to protect
the directory data and the inode metadata, whereas for a regular
file the iolock protects the data and the ilock protects the
metadata. From the VFS perspective, the i_mutex serialises all
accesses to the directory data, and so not holding the ilock for
readdir doesn't matter. The issue is that CXFS doesn't access
directory data via the VFS, so it has no "data serialisaton"
mechanism. Hence we need to hold the IOLOCK in the correct places to
provide this low level directory data access serialisation.
The ilock can then be used just when the extent list needs to be
read, just like we do for regular files. The directory modification
code can take the iolock exclusive when the ilock is also taken,
and this then ensures that readdir is correct excluded while
modifications are in progress.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Lockdep annotations are a maintenance nightmare. Locking has to be
modified to suit the limitations of the annotations, and we're
always having to fix the annotations because they are unable to
express the complexity of locking heirarchies correctly.
So, next up, we've got more issues with lockdep annotations for
inode locking w.r.t. XFS_LOCK_PARENT:
- lockdep classes are exclusive and can't be ORed together
to form new classes.
- IOLOCK needs multiple PARENT subclasses to express the
changes needed for the readdir locking rework needed to
stop the endless flow of lockdep false positives involving
readdir calling filldir under the ILOCK.
- there are only 8 unique lockdep subclasses available,
so we can't create a generic solution.
IOWs we need to treat the 3-bit space available to each lock type
differently:
- IOLOCK uses xfs_lock_two_inodes(), so needs:
- at least 2 IOLOCK subclasses
- at least 2 IOLOCK_PARENT subclasses
- MMAPLOCK uses xfs_lock_two_inodes(), so needs:
- at least 2 MMAPLOCK subclasses
- ILOCK uses xfs_lock_inodes with up to 5 inodes, so needs:
- at least 5 ILOCK subclasses
- one ILOCK_PARENT subclass
- one RTBITMAP subclass
- one RTSUM subclass
For the IOLOCK, split the space into two sets of subclasses.
For the MMAPLOCK, just use half the space for the one subclass to
match the non-parent lock classes of the IOLOCK.
For the ILOCK, use 0-4 as the ILOCK subclasses, 5-7 for the
remaining individual subclasses.
Because they are now all different, modify xfs_lock_inumorder() to
handle the nested subclasses, and to assert fail if passed an
invalid subclass. Further, annotate xfs_lock_inodes() to assert fail
if an invalid combination of lock primitives and inode counts are
passed that would result in a lockdep subclass annotation overflow.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The node directory lookup code uses a state structure that tracks the
path of buffers used to search for the hash of a filename through the
leaf blocks. When the lookup encounters a block that ends with the
requested hash, but the entry has not yet been found, it must shift over
to the next block and continue looking for the entry (i.e., duplicate
hashes could continue over into the next block). This shift mechanism
involves walking back up and down the state structure, replacing buffers
at the appropriate btree levels as necessary.
When a buffer is replaced, the old buffer is released and the new buffer
read into the active slot in the path structure. Because the buffer is
read directly into the path slot, a buffer read failure can result in
setting a NULL buffer pointer in an active slot. This throws off the
state cleanup code in xfs_dir2_node_lookup(), which expects to release a
buffer from each active slot. Instead, a BUG occurs due to a NULL
pointer dereference:
BUG: unable to handle kernel NULL pointer dereference at 00000000000001e8
IP: [<ffffffffa0585063>] xfs_trans_brelse+0x2a3/0x3c0 [xfs]
...
RIP: 0010:[<ffffffffa0585063>] [<ffffffffa0585063>] xfs_trans_brelse+0x2a3/0x3c0 [xfs]
...
Call Trace:
[<ffffffffa05250c6>] xfs_dir2_node_lookup+0xa6/0x2c0 [xfs]
[<ffffffffa0519f7c>] xfs_dir_lookup+0x1ac/0x1c0 [xfs]
[<ffffffffa055d0e1>] xfs_lookup+0x91/0x290 [xfs]
[<ffffffffa05580b3>] xfs_vn_lookup+0x73/0xb0 [xfs]
[<ffffffff8122de8d>] lookup_real+0x1d/0x50
[<ffffffff8123330e>] path_openat+0x91e/0x1490
[<ffffffff81235079>] do_filp_open+0x89/0x100
...
This has been reproduced via a parallel fsstress and filesystem shutdown
workload in a loop. The shutdown triggers the read error in the
aforementioned codepath and causes the BUG in xfs_dir2_node_lookup().
Update xfs_da3_path_shift() to update the active path slot atomically
with respect to the caller when a buffer is replaced. This ensures that
the caller always sees the old or new buffer in the slot and prevents
the NULL pointer dereference.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The sparse inodes feature is currently considered experimental. We warn
at mount time from xfs_mount_validate_sb(). This function is part of the
superblock verifier codepath, however, which means it could be invoked
repeatedly on superblock reads or writes. This is currently only
noticeable from userspace, where mkfs produces multiple warnings at
format time.
As mkfs warnings were not the intent of this change, relocate the mount
time warning to xfs_fs_fill_super(), which is only invoked once and only
in kernel space.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Once the sb_uuid is changed, the wrong uuid is stamped into new
dquots on disk. Found by inspection, verified by generic/219.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Now that sb_uuid can be changed by the user, we cannot use this to
validate the metadata blocks being recovered belong to this
filesystem. We must check against the sb_meta_uuid as that will
remain unchanged.
There is a complication in this code - the superblock itself. We can
not check the sb_meta_uuid unconditionally, as that may not be set
on disk. Hence we must verify the superblock sb_uuid matches between
the log record and the in-core superblock.
Found by inspection after the previous two problems were found.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Adding this simple change to xfstests:common/rc::_scratch_mkfs_xfs:
+ if [ $mkfs_status -eq 0 ]; then
+ xfs_admin -U generate $SCRATCH_DEV > /dev/null
+ fi
triggers all sorts of errors in xfstests. xfs/104 is an example,
where growfs fails with a UUID mismatch corruption detected by
xfs_agf_write_verify() when trying to write the first new AG
headers.
Fix this problem by making sure we copy the sb_meta_uuid into new
metadata written by growfs.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
After changing the UUID on a v5 filesystem, xfstests fails
immediately on a debug kernel with:
XFS: Assertion failed: uuid_equal(&ip->i_d.di_uuid, &mp->m_sb.sb_uuid), file: fs/xfs/xfs_inode.c, line: 799
This needs to check against the sb_meta_uuid, not the user visible
UUID that was changed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
It's entirely possible for userspace to ask for an xattr which
does not exist.
Normally, there is no problem whatsoever when we ask for such
a thing, but when we look at an obfuscated metadump image
on a debug kernel with selinux, we trip over this ASSERT in
xfs_da3_path_shift():
*result = -ENOENT; /* we're out of our tree */
ASSERT(args->op_flags & XFS_DA_OP_OKNOENT);
It (more or less) only shows up in the above scenario, because
xfs_metadump obfuscates attr names, but chooses names which
keep the same hash value - and xfs_da3_node_lookup_int does:
if (((retval == -ENOENT) || (retval == -ENOATTR)) &&
(blk->hashval == args->hashval)) {
error = xfs_da3_path_shift(state, &state->path, 1, 1,
&retval);
IOWS, we only get down to the xfs_da3_path_shift() ASSERT
if we are looking for an xattr which doesn't exist, but we
find xattrs on disk which have the same hash, and so might be
a hash collision, so we try the path shift. When *that*
fails to find what we're looking for, we hit the assert about
XFS_DA_OP_OKNOENT.
Simply setting XFS_DA_OP_OKNOENT in xfs_attr_get solves this
rather corner-case problem with no ill side effects. It's
fine for an attr name lookup to fail.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If a failure occurs after the bmap free list is populated and before
xfs_bmap_finish() completes successfully (which returns a partial
list on failure), the bmap free list must be cancelled. Otherwise,
the extent items on the list are never freed and a memory leak
occurs.
Several random error paths throughout the code suffer this problem.
Fix these up such that xfs_bmap_cancel() is always called on error.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Several areas of code duplicate a pattern where we take the AIL lock,
check whether an item is in the AIL and remove it if so. Create a new
helper for this pattern and use it where appropriate.
Signed-off-by: Brian Foster <bfoster@redhat.com>
The btree cursor cleanup function takes an error parameter that
affects how buffers are released from the cursor. All buffers are
released in the event of error. Several callers do not specify the
XFS_BTREE_ERROR flag in the event of error, however. This can cause
buffers to hang around locked or with an elevated hold count and
thus lead to umount hangs in the event of errors.
Fix up the xfs_btree_del_cursor() callers to pass XFS_BTREE_ERROR if
the cursor is being torn down due to error.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The root inode is read as part of the xfs_mountfs() sequence and the
reference is dropped in the event of failure after we grab the
inode. The reference drop doesn't necessarily free the inode,
however. It marks it for reclaim and potentially kicks off the
reclaim workqueue. The workqueue is destroyed further up the error
path, which means we are subject to crash if the workqueue job runs
after this point or a memory leak which is identified if the
xfs_inode_zone is destroyed (e.g., on module removal). Both of these
outcomes are reproducible via manual instrumentation of a mount
error after the root inode xfs_iget() call in xfs_mountfs().
Update the xfs_mountfs() error path to cancel any potential reclaim
work items and to run a synchronous inode reclaim if the root inode
is marked for reclaim. This ensures that no jobs remain on the queue
before it is destroyed and that the root inode is freed before the
reclaim mechanism is torn down.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The first 4 bytes of every basic block in the physical log is stamped
with the current lsn. To support this mechanism, the log record header
(first block of each new log record) contains space for the original
first byte of each log record block before it is replaced with the lsn.
The log record header has space for 32k worth of blocks. The version 2
log adds new extended record headers for each additional 32k worth of
blocks beyond what is supported by the record header.
The log record checksum incorporates the log record header, the extended
headers and the record payload. xlog_cksum() checksums the extended
headers based on log->l_iclog_heads, which specifies the number of
extended headers in a log record based on the log buffer size mount
option. The log buffer size is variable, however, and thus means the
checksum can be calculated differently based on how a filesystem is
mounted. This is problematic if a filesystem crashes and recovery occurs
on a subsequent mount using a different log buffer size. For example,
crash an active filesystem that is mounted with the default (32k)
logbsize, attempt remount/recovery using '-o logbsize=64k' and the mount
fails on or warns about log checksum failures.
To avoid this problem, update xlog_cksum() to calculate the checksum
based on the size of the log buffer according to the log record. The
size is already included in the h_size field of the log record header
and thus is available at log recovery time. Extended log record headers
are also only written when the log record is large enough to require
them. This makes checksum calculation of log records consistent with the
extended record header mechanism as well as how on-disk records are
checksummed with various log buffer size mount options.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Inode cluster buffers are invalidated and cancelled when inode chunks
are freed to notify log recovery that previous logged updates to the
metadata buffer should be skipped. This ensures that log recovery does
not overwrite buffers that might have already been reused.
On v4 filesystems, inode chunk allocation and inode updates are logged
via the cluster buffers and thus cancellation is easily detected via
buffer cancellation items. v5 filesystems use the new icreate
transaction, which uses logical logging and ordered buffers to log a
full inode chunk allocation at once. The resulting icreate item often
spans multiple inode cluster buffers.
Log recovery checks for cancelled buffers when processing icreate log
items, but it has a couple problems. First, it uses the full length of
the inode chunk rather than the cluster size. Second, it uses the length
in FSB units rather than BB units. Either of these problems prevent
icreate recovery from identifying cancelled buffers and thus inode
initialization proceeds unconditionally.
Update xlog_recover_do_icreate_pass2() to iterate the icreate range in
cluster sized increments and check each increment for cancellation.
Since icreate is currently only used for the minimum atomic inode chunk
allocation, we expect that either all or none of the buffers will be
cancelled. Cancel the icreate if at least one buffer is cancelled to
avoid making a bad situation worse by initializing a partial inode
chunk, but detect such anomalies and warn the user.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Various log items have recovery tracepoints to identify whether a
particular log item is recovered or cancelled. Add the equivalent
tracepoints for the icreate transaction.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Log recovery occurs in two phases at mount time. In the first phase,
EFIs and EFDs are processed and potentially cancelled out. EFIs without
EFD objects are inserted into the AIL for processing and recovery in the
second phase. xfs_mountfs() runs various other operations between the
phases and is thus subject to failure. If failure occurs after the first
phase but before the second, pending EFIs sit on the AIL, pin it and
cause the mount to hang.
Update the mount sequence to ensure that pending EFIs are cancelled in
the event of failure. Add a recovery cancellation mechanism to iterate
the AIL and cancel all EFI items when requested. Plumb cancellation
support through the log mount finish helper and update xfs_mountfs() to
invoke cancellation in the event of failure after recovery has started.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The EFI is initialized with a reference count of 2. One for the EFI to
ensure the item makes it to the AIL and one for the subsequently created
EFD to release the EFI once the EFD is committed. Log recovery uses the
EFI in a similar manner, but implements a hack to remove both references
in one call once the EFD is handled.
Update log recovery to use EFI reference counting in a manner consistent
with the log. When an EFI is encountered during recovery, an EFI item is
allocated and inserted to the AIL directly. Since the EFI reference is
typically dropped when the EFI is unpinned and this is analogous with
AIL insertion, drop the EFI reference at this point.
When a corresponding EFD is encountered in the log, this indicates that
the extents were freed, no processing is required and the EFI can be
dropped. Update xlog_recover_efd_pass2() to simply drop the EFD
reference at this point rather than open code the AIL removal and EFI
free.
Remaining EFIs (i.e., with no corresponding EFD) are processed in
xlog_recover_finish(). An EFD transaction is allocated and the extents
are freed, which transfers ownership of the EFI reference to the EFD
item in the log.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Log recovery attempts to free extents with leftover EFIs in the AIL
after initial processing. If the extent free fails (e.g., due to
unrelated fs corruption), the transaction is cancelled, though it
might not be dirtied at the time. If this is the case, the EFD does
not abort and thus does not release the EFI. This can lead to hangs
as the EFI pins the AIL.
Update xlog_recover_process_efi() to log the EFD in the transaction
before xfs_free_extent() errors are handled to ensure the
transaction is dirty, aborts the EFD and releases the EFI on error.
Since this is a requirement for EFD processing (and consistent with
xfs_bmap_finish()), update the EFD logging helper to do the extent
free and unconditionally log the EFD. This encodes the required EFD
logging behavior into the helper and reduces the likelihood of
errors down the road.
[dchinner: re-add xfs_alloc.h to xfs_log_recover.c to fix build
failure.]
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Freeing an extent in XFS involves logging an EFI (extent free
intention), freeing the actual extent, and logging an EFD (extent
free done). The EFI object is created with a reference count of 2:
one for the current transaction and one for the subsequently created
EFD. Under normal circumstances, the first reference is dropped when
the EFI is unpinned and the second reference is dropped when the EFD
is committed to the on-disk log.
In event of errors or filesystem shutdown, there are various
potential cleanup scenarios depending on the state of the EFI/EFD.
The cleanup scenarios are confusing and racy, as demonstrated by the
following test sequence:
# mount $dev $mnt
# fsstress -d $mnt -n 99999 -p 16 -z -f fallocate=1 \
-f punch=1 -f creat=1 -f unlink=1 &
# sleep 5
# killall -9 fsstress; wait
# godown -f $mnt
# umount
... in which the final umount can hang due to the AIL being pinned
indefinitely by one or more EFI items. This can occur due to several
conditions. For example, if the shutdown occurs after the EFI is
committed to the on-disk log and the EFD committed to the CIL, but
before the EFD committed to the log, the EFD iop_committed() abort
handler does not drop its reference to the EFI. Alternatively,
manual error injection in the xfs_bmap_finish() codepath shows that
if an error occurs after the EFI transaction is committed but before
the EFD is constructed and logged, the EFI is never released from
the AIL.
Update the EFI/EFD item handling code to use a more straightforward
and reliable approach to error handling. If an error occurs after
the EFI transaction is committed and before the EFD is constructed,
release the EFI explicitly from xfs_bmap_finish(). If the EFI
transaction is cancelled, release the EFI in the unlock handler.
Once the EFD is constructed, it is responsible for releasing the EFI
under any circumstances (including whether the EFI item aborts due
to log I/O error). Update the EFD item handlers to release the EFI
if the transaction is cancelled or aborts due to log I/O error.
Finally, update xfs_bmap_finish() to log at least one EFD extent to
the transaction before xfs_free_extent() errors are handled to
ensure the transaction is dirty and EFD item error handling is
triggered.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Some callers need to make error handling decisions based on whether
the current transaction successfully committed or not. Rename
xfs_trans_roll(), add a new parameter and provide a wrapper to
preserve existing callers.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Release of the EFI either occurs based on the reference count or the
extent count. The extent count used is either the count tracked in
the EFI or EFD, depending on the particular situation. In either
case, the count is initialized to the final value and thus always
matches the current efi_next_extent value once the EFI is completely
constructed. For example, the EFI extent count is increased as the
extents are logged in xfs_bmap_finish() and the full free list is
always completely processed. Therefore, the count is guaranteed to
be complete once the EFI transaction is committed. The EFD uses the
efd_nextents counter to release the EFI. This counter is initialized
to the count of the EFI when the EFD is created. Thus the EFD, as
currently used, has no concept of partial EFI release based on
extent count.
Given that the EFI extent count is always released in whole, use of
the extent count for reference counting is unnecessary. Remove this
level of the API and release the EFI based on the core reference
count. The efi_next_extent counter remains because it is still used
to track the slot to log the next extent to free.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Preparation to hide the sb->s_writers internals from xfs and btrfs.
Add 2 trivial define's they can use rather than play with ->s_writers
directly. No changes in btrfs/transaction.o and xfs/xfs_aops.o.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jan Kara <jack@suse.com>
We can always fill up the bio now, no need to estimate the possible
size based on queue parameters.
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
[hch: rebased and wrote a changelog]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently we have two different ways to signal an I/O error on a BIO:
(1) by clearing the BIO_UPTODATE flag
(2) by returning a Linux errno value to the bi_end_io callback
The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario. Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.
So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This adds a new superblock field, sb_meta_uuid. If set, along with
a new incompat flag, the code will use that field on a V5 filesystem
to compare to metadata UUIDs, which allows us to change the user-
visible UUID at will. Userspace handles the setting and clearing
of the incompat flag as appropriate, as the UUID gets changed; i.e.
setting the user-visible UUID back to the original UUID (as stored in
the new field) will remove the incompatible feature flag.
If the incompat flag is not set, this copies the user-visible UUID into
into the meta_uuid slot in memory when the superblock is read from disk;
the meta_uuid field is not written back to disk in this case.
The remainder of this patch simply switches verifiers, initializers,
etc to use the new sb_meta_uuid field.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The header side of xfs_bit.c is already in libxfs, and the sparse
inode code requires the xfs_next_bit() function so pull in the
xfs_bit.c file so that a sparse inode enabled libxfs compiles
cleanly in userspace.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_create() and xfs_create_tmpfile() have useless jumps to identical
labels. Simplify them.
Signed-off-by: Jan Kara <jack@suse.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The second and subsequent lines of multi-line logging messages
are not prefixed with the same information as the first line.
Separate messages with newlines into multiple calls to ensure
consistent prefixing and allow easier grep use.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When log recovery hits a new transaction, it copies the transaction
header from the expected location in the log to the in-core structure
using the length from the op record header. This length is validated to
ensure it doesn't exceed the length of the record, but not against the
expected size of a transaction header (and thus the size of the in-core
structure). If the on-disk length is corrupted, the associated memcpy()
can overflow, write to unrelated memory and lead to crashes. This has
been reproduced via filesystem fuzzing.
The code currently handles the possibility that the transaction header
is split across two op records. Neither instance accounts for corruption
where the op record length might be larger than the in-core transaction
header. Update both sites to detect such corruption, warn and return an
error from log recovery. Also add some comments and assert that if the
record is split, the copy of the second portion is less than a full
header. Otherwise, this suggests the copy of the second portion could
have overwritten bits from the first and thus that something could be
wrong.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We have seen somewhat rare reports of the following assert from
xlog_cil_push_background() failing during ltp tests or somewhat
innocuous desktop root fs workloads (e.g., virt operations, initramfs
construction):
ASSERT(!list_empty(&cil->xc_cil));
The reasoning behind the assert is that the transaction has inserted
items to the CIL and hit background push codepath all with
cil->xc_ctx_lock held for reading. This locks out background commit from
emptying the CIL, which acquires the lock for writing. Therefore, the
reasoning is that the items previously inserted in the CIL should still
be present.
The cil->xc_ctx_lock read lock is not sufficient to protect the xc_cil
list, however, due to how CIL insertion is handled.
xlog_cil_insert_items() inserts and reorders the dirty transaction items
to the tail of the CIL under xc_cil_lock. It uses list_move_tail() to
achieve insertion and reordering in the same block of code. This
function removes and reinserts an item to the tail of the list. If a
transaction commits an item that was already logged and thus already
resides in the CIL, and said item is the sole item on the list, the
removal and reinsertion creates a temporary state where the list is
actually empty.
This state is not valid and thus should never be observed by concurrent
transaction commit-side checks in the circumstances outlined above. We
do not want to acquire the xc_cil_lock in all of these instances as it
was previously removed and replaced with a separate push lock for
performance reasons. Therefore, close any races with list_empty() on the
insertion side by ensuring that the list is never in a transient empty
state.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_bunmapi() doesn't care what type of extent is being freed and
does not look at the XFS_BMAPI_METADATA flag at all. As such we can
remove the XFS_BMAPI_METADATA from all callers that use it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We don't log remote attribute contents, and instead write them
synchronously before we commit the block allocation and attribute
tree update transaction. As a result we are writing to the allocated
space before the allcoation has been made permanent.
As a result, we cannot consider this allocation to be a metadata
allocation. Metadata allocation can take blocks from the free list
and so reuse them before the transaction that freed the block is
committed to disk. This behaviour is perfectly fine for journalled
metadata changes as log recovery will ensure the free operation is
replayed before the overwrite, but for remote attribute writes this
is not the case.
Hence we have to consider the remote attribute blocks to contain
data and allocate accordingly. We do this by dropping the
XFS_BMAPI_METADATA flag from the block allocation. This means the
allocation will not use blocks that are on the busy list without
first ensuring that the freeing transaction has been committed to
disk and the blocks removed from the busy list. This ensures we will
never overwrite a freed block without first ensuring that it is
really free.
cc: <stable@vger.kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In recent testing, a system that crashed failed log recovery on
restart with a bad symlink buffer magic number:
XFS (vda): Starting recovery (logdev: internal)
XFS (vda): Bad symlink block magic!
XFS: Assertion failed: 0, file: fs/xfs/xfs_log_recover.c, line: 2060
On examination of the log via xfs_logprint, none of the symlink
buffers in the log had a bad magic number, nor were any other types
of buffer log format headers mis-identified as symlink buffers.
Tracing was used to find the buffer the kernel was tripping over,
and xfs_db identified it's contents as:
000: 5841524d 00000000 00000346 64d82b48 8983e692 d71e4680 a5f49e2c b317576e
020: 00000000 00602038 00000000 006034ce d0020000 00000000 4d4d4d4d 4d4d4d4d
040: 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d
060: 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d 4d4d4d4d
.....
This is a remote attribute buffer, which are notable in that they
are not logged but are instead written synchronously by the remote
attribute code so that they exist on disk before the attribute
transactions are committed to the journal.
The above remote attribute block has an invalid LSN in it - cycle
0xd002000, block 0 - which means when log recovery comes along to
determine if the transaction that writes to the underlying block
should be replayed, it sees a block that has a future LSN and so
does not replay the buffer data in the transaction. Instead, it
validates the buffer magic number and attaches the buffer verifier
to it. It is this buffer magic number check that is failing in the
above assert, indicating that we skipped replay due to the LSN of
the underlying buffer.
The problem here is that the remote attribute buffers cannot have a
valid LSN placed into them, because the transaction that contains
the attribute tree pointer changes and the block allocation that the
attribute data is being written to hasn't yet been committed. Hence
the LSN field in the attribute block is completely unwritten,
thereby leaving the underlying contents of the block in the LSN
field. It could have any value, and hence a future overwrite of the
block by log recovery may or may not work correctly.
Fix this by always writing an invalid LSN to the remote attribute
block, as any buffer in log recovery that needs to write over the
remote attribute should occur. We are protected from having old data
written over the attribute by the fact that freeing the block before
the remote attribute is written will result in the buffer being
marked stale in the log and so all changes prior to the buffer stale
transaction will be cancelled by log recovery.
Hence it is safe to ignore the LSN in the case or synchronously
written, unlogged metadata such as remote attribute blocks, and to
ensure we do that correctly, we need to write an invalid LSN to all
remote attribute blocks to trigger immediate recovery of metadata
that is written over the top.
As a further protection for filesystems that may already have remote
attribute blocks with bad LSNs on disk, change the log recovery code
to always trigger immediate recovery of metadata over remote
attribute blocks.
cc: <stable@vger.kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When modifying the patch series to handle the XFS MMAP_LOCK nesting
of page faults, I botched the conversion of the read page fault
path, and so it is only every calling through the page cache. Re-add
the necessary __dax_fault() call for such files.
Because the get_blocks callback on read faults may not set up the
mapping buffer correctly to allow unwritten extent completion to be
run, we need to allow callers of __dax_fault() to pass a null
complete_unwritten() callback. The DAX code always zeros the
unwritten page when it is read faulted so there are no stale data
exposure issues with not doing the conversion. The only downside
will be the potential for increased CPU overhead on repeated read
faults of the same page. If this proves to be a problem, then the
filesystem needs to fix it's get_block callback and provide a
convert_unwritten() callback to the read fault path.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull more vfs updates from Al Viro:
"Assorted VFS fixes and related cleanups (IMO the most interesting in
that part are f_path-related things and Eric's descriptor-related
stuff). UFS regression fixes (it got broken last cycle). 9P fixes.
fs-cache series, DAX patches, Jan's file_remove_suid() work"
[ I'd say this is much more than "fixes and related cleanups". The
file_table locking rule change by Eric Dumazet is a rather big and
fundamental update even if the patch isn't huge. - Linus ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits)
9p: cope with bogus responses from server in p9_client_{read,write}
p9_client_write(): avoid double p9_free_req()
9p: forgetting to cancel request on interrupted zero-copy RPC
dax: bdev_direct_access() may sleep
block: Add support for DAX reads/writes to block devices
dax: Use copy_from_iter_nocache
dax: Add block size note to documentation
fs/file.c: __fget() and dup2() atomicity rules
fs/file.c: don't acquire files->file_lock in fd_install()
fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation
vfs: avoid creation of inode number 0 in get_next_ino
namei: make set_root_rcu() return void
make simple_positive() public
ufs: use dir_pages instead of ufs_dir_pages()
pagemap.h: move dir_pages() over there
remove the pointless include of lglock.h
fs: cleanup slight list_entry abuse
xfs: Correctly lock inode when removing suid and file capabilities
fs: Call security_ops->inode_killpriv on truncate
fs: Provide function telling whether file_remove_privs() will do anything
...
This update contains:
o A new sparse on-disk inode record format to allow small extents to
be used for inode allocation when free space is fragmented.
o DAX support. This includes minor changes to the DAX core code to
fix problems with lock ordering and bufferhead mapping abuse.
o transaction commit interface cleanup
o removal of various unnecessary XFS specific type definitions
o cleanup and optimisation of freelist preparation before allocation
o various minor cleanups
o bug fixes for
- transaction reservation leaks
- incorrect inode logging in unwritten extent conversion
- mmap lock vs freeze ordering
- remote symlink mishandling
- attribute fork removal issues.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=3x+W
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pul xfs updates from Dave Chinner:
"There's a couple of small API changes to the core DAX code which
required small changes to the ext2 and ext4 code bases, but otherwise
everything is within the XFS codebase.
This update contains:
- A new sparse on-disk inode record format to allow small extents to
be used for inode allocation when free space is fragmented.
- DAX support. This includes minor changes to the DAX core code to
fix problems with lock ordering and bufferhead mapping abuse.
- transaction commit interface cleanup
- removal of various unnecessary XFS specific type definitions
- cleanup and optimisation of freelist preparation before allocation
- various minor cleanups
- bug fixes for
- transaction reservation leaks
- incorrect inode logging in unwritten extent conversion
- mmap lock vs freeze ordering
- remote symlink mishandling
- attribute fork removal issues"
* tag 'xfs-for-linus-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (49 commits)
xfs: don't truncate attribute extents if no extents exist
xfs: clean up XFS_MIN_FREELIST macros
xfs: sanitise error handling in xfs_alloc_fix_freelist
xfs: factor out free space extent length check
xfs: xfs_alloc_fix_freelist() can use incore perag structures
xfs: remove xfs_caddr_t
xfs: use void pointers in log validation helpers
xfs: return a void pointer from xfs_buf_offset
xfs: remove inst_t
xfs: remove __psint_t and __psunsigned_t
xfs: fix remote symlinks on V5/CRC filesystems
xfs: fix xfs_log_done interface
xfs: saner xfs_trans_commit interface
xfs: remove the flags argument to xfs_trans_cancel
xfs: pass a boolean flag to xfs_trans_free_items
xfs: switch remaining xfs_trans_dup users to xfs_trans_roll
xfs: check min blks for random debug mode sparse allocations
xfs: fix sparse inodes 32-bit compile failure
xfs: add initial DAX support
xfs: add DAX IO path support
...
Pull cgroup writeback support from Jens Axboe:
"This is the big pull request for adding cgroup writeback support.
This code has been in development for a long time, and it has been
simmering in for-next for a good chunk of this cycle too. This is one
of those problems that has been talked about for at least half a
decade, finally there's a solution and code to go with it.
Also see last weeks writeup on LWN:
http://lwn.net/Articles/648292/"
* 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits)
writeback, blkio: add documentation for cgroup writeback support
vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB
writeback: do foreign inode detection iff cgroup writeback is enabled
v9fs: fix error handling in v9fs_session_init()
bdi: fix wrong error return value in cgwb_create()
buffer: remove unusued 'ret' variable
writeback: disassociate inodes from dying bdi_writebacks
writeback: implement foreign cgroup inode bdi_writeback switching
writeback: add lockdep annotation to inode_to_wb()
writeback: use unlocked_inode_to_wb transaction in inode_congested()
writeback: implement unlocked_inode_to_wb transaction and use it for stat updates
writeback: implement [locked_]inode_to_wb_and_lock_list()
writeback: implement foreign cgroup inode detection
writeback: make writeback_control track the inode being written back
writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb()
mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use
writeback: implement memcg writeback domain based throttling
writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes
writeback: implement memcg wb_domain
writeback: update wb_over_bg_thresh() to use wb_domain aware operations
...
Pull core block IO update from Jens Axboe:
"Nothing really major in here, mostly a collection of smaller
optimizations and cleanups, mixed with various fixes. In more detail,
this contains:
- Addition of policy specific data to blkcg for block cgroups. From
Arianna Avanzini.
- Various cleanups around command types from Christoph.
- Cleanup of the suspend block I/O path from Christoph.
- Plugging updates from Shaohua and Jeff Moyer, for blk-mq.
- Eliminating atomic inc/dec of both remaining IO count and reference
count in a bio. From me.
- Fixes for SG gap and chunk size support for data-less (discards)
IO, so we can merge these better. From me.
- Small restructuring of blk-mq shared tag support, freeing drivers
from iterating hardware queues. From Keith Busch.
- A few cfq-iosched tweaks, from Tahsin Erdogan and me. Makes the
IOPS mode the default for non-rotational storage"
* 'for-4.2/core' of git://git.kernel.dk/linux-block: (35 commits)
cfq-iosched: fix other locations where blkcg_to_cfqgd() can return NULL
cfq-iosched: fix sysfs oops when attempting to read unconfigured weights
cfq-iosched: move group scheduling functions under ifdef
cfq-iosched: fix the setting of IOPS mode on SSDs
blktrace: Add blktrace.c to BLOCK LAYER in MAINTAINERS file
block, cgroup: implement policy-specific per-blkcg data
block: Make CFQ default to IOPS mode on SSDs
block: add blk_set_queue_dying() to blkdev.h
blk-mq: Shared tag enhancements
block: don't honor chunk sizes for data-less IO
block: only honor SG gap prevention for merges that contain data
block: fix returnvar.cocci warnings
block, dm: don't copy bios for request clones
block: remove management of bi_remaining when restoring original bi_end_io
block: replace trylock with mutex_lock in blkdev_reread_part()
block: export blkdev_reread_part() and __blkdev_reread_part()
suspend: simplify block I/O handling
block: collapse bio bit space
block: remove unused BIO_RW_BLOCK and BIO_EOF flags
block: remove BIO_EOPNOTSUPP
...
Currently XFS calls file_remove_privs() without holding i_mutex. This is
wrong because that function can end up messing with file permissions and
file capabilities stored in xattrs for which we need i_mutex held.
Fix the problem by grabbing iolock exclusively when we will need to
change anything in permissions / xattrs.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
file_remove_suid() is a misnomer since it removes also file capabilities
stored in xattrs and sets S_NOSEC flag. Also should_remove_suid() tells
something else than whether file_remove_suid() call is necessary which
leads to bugs.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The xfs_attr3_root_inactive() call from xfs_attr_inactive() assumes that
attribute blocks exist to invalidate. It is possible to have an
attribute fork without extents, however. Consider the case where the
attribute fork is created towards the beginning of xfs_attr_set() but
some part of the subsequent attribute set fails.
If an inode in such a state hits xfs_attr_inactive(), it eventually
calls xfs_dabuf_map() and possibly xfs_bmapi_read(). The former emits a
filesystem corruption warning, returns an error that bubbles back up to
xfs_attr_inactive(), and leads to destruction of the in-core attribute
fork without an on-disk reset. If the inode happens to make it back
through xfs_inactive() in this state (e.g., via a concurrent bulkstat
that cycles the inode from the reclaim state and releases it), i_afp
might not exist when xfs_bmapi_read() is called and causes a NULL
dereference panic.
A '-p 2' fsstress run to ENOSPC on a relatively small fs (1GB)
reproduces these problems. The behavior is a regression caused by:
6dfe5a0 xfs: xfs_attr_inactive leaves inconsistent attr fork state behind
... which removed logic that avoided the attribute extent truncate when
no extents exist. Restore this logic to ensure the attribute fork is
destroyed and reset correctly if it exists without any allocated
extents.
cc: stable@vger.kernel.org # 3.12 to 4.0.x
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull vfs updates from Al Viro:
"In this pile: pathname resolution rewrite.
- recursion in link_path_walk() is gone.
- nesting limits on symlinks are gone (the only limit remaining is
that the total amount of symlinks is no more than 40, no matter how
nested).
- "fast" (inline) symlinks are handled without leaving rcuwalk mode.
- stack footprint (independent of the nesting) is below kilobyte now,
about on par with what it used to be with one level of nested
symlinks and ~2.8 times lower than it used to be in the worst case.
- struct nameidata is entirely private to fs/namei.c now (not even
opaque pointers are being passed around).
- ->follow_link() and ->put_link() calling conventions had been
changed; all in-tree filesystems converted, out-of-tree should be
able to follow reasonably easily.
For out-of-tree conversions, see Documentation/filesystems/porting
for details (and in-tree filesystems for examples of conversion).
That has sat in -next since mid-May, seems to survive all testing
without regressions and merges clean with v4.1"
* 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (131 commits)
turn user_{path_at,path,lpath,path_dir}() into static inlines
namei: move saved_nd pointer into struct nameidata
inline user_path_create()
inline user_path_parent()
namei: trim do_last() arguments
namei: stash dfd and name into nameidata
namei: fold path_cleanup() into terminate_walk()
namei: saner calling conventions for filename_parentat()
namei: saner calling conventions for filename_create()
namei: shift nameidata down into filename_parentat()
namei: make filename_lookup() reject ERR_PTR() passed as name
namei: shift nameidata inside filename_lookup()
namei: move putname() call into filename_lookup()
namei: pass the struct path to store the result down into path_lookupat()
namei: uninline set_root{,_rcu}()
namei: be careful with mountpoint crossings in follow_dotdot_rcu()
Documentation: remove outdated information from automount-support.txt
get rid of assorted nameidata-related debris
lustre: kill unused helper
lustre: kill unused macro (LOOKUP_CONTINUE)
...
