Newer versions of GCC (>= 9) demand that the size of the string to be
copied must be explicitly smaller than the size of the destination.
Thus, the NULL char has to be taken into account on strncpy.
This will avoid the following compiling error:
tlbie_test.c: In function 'main':
tlbie_test.c:639:4: error: 'strncpy' specified bound 100 equals destination size
strncpy(logdir, optarg, LOGDIR_NAME_SIZE);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191003211010.9711-1-desnesn@linux.ibm.com
Out of the three nc implementations widely in use, at least two (BSD netcat
and nmap-ncat) do not support -l combined with -s. Modify the nc invocation
to be accepted by all of them.
Fixes: 17a90a7884 ("selftests/bpf: test that GSO works in lwt_ip_encap")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/9f177682c387f3f943bb64d849e6c6774df3c5b4.1570539863.git.jbenc@redhat.com
Many distributions enable rp_filter. However, the flow dissector test
generates packets that have 1.1.1.1 set as (inner) source address without
this address being reachable. This causes the selftest to fail.
The selftests should not assume a particular initial configuration. Switch
off rp_filter.
Fixes: 50b3ed57de ("selftests/bpf: test bpf flow dissection")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Petar Penkov <ppenkov@google.com>
Link: https://lore.kernel.org/bpf/513a298f53e99561d2f70b2e60e2858ea6cda754.1570539863.git.jbenc@redhat.com
This Kselftest update for Linux 5.4-rc3 consists fixes for existing
tests and the framework. Cristian Marussi's patches add ability to
skip targets (tests) and exclude tests that didn't build from run-list.
These patches improve the Kselftest results. Ability to skip targets
helps avoid running tests that aren't supported in certain environments.
As an example, bpf tests from mainline aren't supported on stable kernels
and have dependency on bleeding edge llvm. Being able to skip bpf on
systems that can't meet this llvm dependency will be helpful.
Kselftest can be built and installed from the main Makefile. This change
help simplify Kselftest use-cases which addresses request from users.
Kees Cook added per test timeout support to limit individual test run-time.
-----BEGIN PGP SIGNATURE-----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=vdrT
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes for existing tests and the framework.
Cristian Marussi's patches add the ability to skip targets (tests) and
exclude tests that didn't build from run-list. These patches improve
the Kselftest results. Ability to skip targets helps avoid running
tests that aren't supported in certain environments. As an example,
bpf tests from mainline aren't supported on stable kernels and have
dependency on bleeding edge llvm. Being able to skip bpf on systems
that can't meet this llvm dependency will be helpful.
Kselftest can be built and installed from the main Makefile. This
change help simplify Kselftest use-cases which addresses request from
users.
Kees Cook added per test timeout support to limit individual test
run-time"
* tag 'linux-kselftest-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: watchdog: Add command line option to show watchdog_info
selftests: watchdog: Validate optional file argument
selftests/kselftest/runner.sh: Add 45 second timeout per test
kselftest: exclude failed TARGETS from runlist
kselftest: add capability to skip chosen TARGETS
selftests: Add kselftest-all and kselftest-install targets
perf script:
Andi Kleen:
- Fix recovery from LBR/binary mismatch in the "brstackinsn" --field.
perf annotate:
Arnaldo Carvalho de Melo:
- Propagate errors so that meaningful messages can be presented to the
user in case of problems.
perf map:
Steve MacLean:
- Fix handling of maps partially overlapped, resolving symbols in the
ranges not replaced by new mmaps.
perf tests:
Ian Rogers:
- Use raise() instead of NULL derefs to avoid causing a SIGILL rather than a
SIGSEGV for optimized builds that turn NULL derefs into ud2 instructions.
perf LLVM:
Ian Rogers:
- Don't access out-of-scope array.
perf inject:
Steve MacLean:
- Fix JIT_CODE_MOVE filename, that was having a u64 truncaded into a 32-bit
snprintf format and also a missing ".so" suffix in another case.
libsubcmd:
Ian Rogers:
- Make _FORTIFY_SOURCE defines dependent on the feature, avoiding
false positives with with memory sanitizers such as LLVM's ASan.
Vendor specific events:
Intel:
Andi Kleen:
- Fix period for Intel fixed counters.
s390:
Thomas Richter (2):
- Fix some event details transaction for machine type 8561.
tools headers UAPI:
Arnaldo Carvalho de Melo:
- Sync headers with the kernel, catching new usbdevfs ioctls and
madvise behaviours to properly decode in 'perf trace' output.
Documentation:
Steve MacLean:
- Correct and clarify jitdump spec.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXZMyWQAKCRCyPKLppCJ+
Jz0qAQC9lZQrWR+Q5S1rXbp5x45+mIji7Q8UK5pyzhpLRAOYNwD/cR6v6TCE96lE
a2hCqV+gV+pbc70Bw5H7TN+kVOtGaQE=
=wcfs
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.4-20191001' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
perf script:
Andi Kleen:
- Fix recovery from LBR/binary mismatch in the "brstackinsn" --field.
perf annotate:
Arnaldo Carvalho de Melo:
- Propagate errors so that meaningful messages can be presented to the
user in case of problems.
perf map:
Steve MacLean:
- Fix handling of maps partially overlapped, resolving symbols in the
ranges not replaced by new mmaps.
perf tests:
Ian Rogers:
- Use raise() instead of NULL derefs to avoid causing a SIGILL rather than a
SIGSEGV for optimized builds that turn NULL derefs into ud2 instructions.
perf LLVM:
Ian Rogers:
- Don't access out-of-scope array.
perf inject:
Steve MacLean:
- Fix JIT_CODE_MOVE filename, that was having a u64 truncaded into a 32-bit
snprintf format and also a missing ".so" suffix in another case.
libsubcmd:
Ian Rogers:
- Make _FORTIFY_SOURCE defines dependent on the feature, avoiding
false positives with with memory sanitizers such as LLVM's ASan.
Vendor specific events:
Intel:
Andi Kleen:
- Fix period for Intel fixed counters.
s390:
Thomas Richter (2):
- Fix some event details transaction for machine type 8561.
tools headers UAPI:
Arnaldo Carvalho de Melo:
- Sync headers with the kernel, catching new usbdevfs ioctls and
madvise behaviours to properly decode in 'perf trace' output.
Documentation:
Steve MacLean:
- Correct and clarify jitdump spec.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull networking fixes from David Miller:
1) Fix ieeeu02154 atusb driver use-after-free, from Johan Hovold.
2) Need to validate TCA_CBQ_WRROPT netlink attributes, from Eric
Dumazet.
3) txq null deref in mac80211, from Miaoqing Pan.
4) ionic driver needs to select NET_DEVLINK, from Arnd Bergmann.
5) Need to disable bh during nft_connlimit GC, from Pablo Neira Ayuso.
6) Avoid division by zero in taprio scheduler, from Vladimir Oltean.
7) Various xgmac fixes in stmmac driver from Jose Abreu.
8) Avoid 64-bit division in mlx5 leading to link errors on 32-bit from
Michal Kubecek.
9) Fix bad VLAN check in rtl8366 DSA driver, from Linus Walleij.
10) Fix sleep while atomic in sja1105, from Vladimir Oltean.
11) Suspend/resume deadlock in stmmac, from Thierry Reding.
12) Various UDP GSO fixes from Josh Hunt.
13) Fix slab out of bounds access in tcp_zerocopy_receive(), from Eric
Dumazet.
14) Fix OOPS in __ipv6_ifa_notify(), from David Ahern.
15) Memory leak in NFC's llcp_sock_bind, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
selftests/net: add nettest to .gitignore
net: qlogic: Fix memory leak in ql_alloc_large_buffers
nfc: fix memory leak in llcp_sock_bind()
sch_dsmark: fix potential NULL deref in dsmark_init()
net: phy: at803x: use operating parameters from PHY-specific status
net: phy: extract pause mode
net: phy: extract link partner advertisement reading
net: phy: fix write to mii-ctrl1000 register
ipv6: Handle missing host route in __ipv6_ifa_notify
net: phy: allow for reset line to be tied to a sleepy GPIO controller
net: ipv4: avoid mixed n_redirects and rate_tokens usage
r8152: Set macpassthru in reset_resume callback
cxgb4:Fix out-of-bounds MSI-X info array access
Revert "ipv6: Handle race in addrconf_dad_work"
net: make sock_prot_memory_pressure() return "const char *"
rxrpc: Fix rxrpc_recvmsg tracepoint
qmi_wwan: add support for Cinterion CLS8 devices
tcp: fix slab-out-of-bounds in tcp_zerocopy_receive()
lib: textsearch: fix escapes in example code
udp: only do GSO if # of segs > 1
...
nettest is missing from gitignore.
Fixes: acda655fef ("selftests: Add nettest")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
a nested hypervisor has always been busted on Broadwell and newer processors,
and that has finally been fixed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdlzTRAAoJEL/70l94x66DElcH/Rvhn5VQE/n2J+tKEXAICxQu
FqcTBJ5x2mp04aFe7xD3kWoKRJmz2lmHdw2ahFd4sqqLfGEFF/KW24ADI33vzLx/
UmT78O0Je3PX77TRnEXy+napbJny0iT6ikTAQKPbyQ151JlqlbPvatpDXXLPWQHv
jj6nKHCvMBrhV3kgaXO3cTFl8swX1hvR9lo9PcA2gRNt+HMN0heUmpfKughPoOes
JH+UNjsEr7MYlXYlIIc9o71EYH+kgPObwlLejy0ture+dvvZEJUJjZJE8H/XG5f2
ryXG9favaCOTAvaGf0R5Es+47A3crqUr6gHS0N28QKPn7x4hehIkKpA9dXQnWIw=
=1/LN
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM and x86 bugfixes of all kinds.
The most visible one is that migrating a nested hypervisor has always
been busted on Broadwell and newer processors, and that has finally
been fixed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
KVM: x86: omit "impossible" pmu MSRs from MSR list
KVM: nVMX: Fix consistency check on injected exception error code
KVM: x86: omit absent pmu MSRs from MSR list
selftests: kvm: Fix libkvm build error
kvm: vmx: Limit guest PMCs to those supported on the host
kvm: x86, powerpc: do not allow clearing largepages debugfs entry
KVM: selftests: x86: clarify what is reported on KVM_GET_MSRS failure
KVM: VMX: Set VMENTER_L1D_FLUSH_NOT_REQUIRED if !X86_BUG_L1TF
selftests: kvm: add test for dirty logging inside nested guests
KVM: x86: fix nested guest live migration with PML
KVM: x86: assign two bits to track SPTE kinds
KVM: x86: Expose XSAVEERPTR to the guest
kvm: x86: Enumerate support for CLZERO instruction
kvm: x86: Use AMD CPUID semantics for AMD vCPUs
kvm: x86: Improve emulation of CPUID leaves 0BH and 1FH
KVM: X86: Fix userspace set invalid CR4
kvm: x86: Fix a spurious -E2BIG in __do_cpuid_func
KVM: LAPIC: Loosen filter for adaptive tuning of lapic_timer_advance_ns
KVM: arm/arm64: vgic: Use the appropriate TRACE_INCLUDE_PATH
arm64: KVM: Kill hyp_alternate_select()
...
Prior to this change an application sending <= 1MSS worth of data and
enabling UDP GSO would fail if the system had SW GSO enabled, but the
same send would succeed if HW GSO offload is enabled. In addition to this
inconsistency the error in the SW GSO case does not get back to the
application if sending out of a real device so the user is unaware of this
failure.
With this change we only perform GSO if the # of segments is > 1 even
if the application has enabled segmentation. I've also updated the
relevant udpgso selftests.
Fixes: bec1f6f697 ("udp: generate gso with UDP_SEGMENT")
Signed-off-by: Josh Hunt <johunt@akamai.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following build error from "make TARGETS=kvm kselftest":
libkvm.a(assert.o): relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a PIE object; recompile with -fPIC
This error is seen when build is done from the main Makefile using
kselftest target. In this case KBUILD_CPPFLAGS and CC_OPTION_CFLAGS
are defined.
When build is invoked using:
"make -C tools/testing/selftests/kvm" KBUILD_CPPFLAGS and CC_OPTION_CFLAGS
aren't defined.
There is no need to pass in KBUILD_CPPFLAGS and CC_OPTION_CFLAGS for the
check to determine if --no-pie is necessary, which is the case when these
two aren't defined when "make -C tools/testing/selftests/kvm" runs.
Fix it by simplifying the no-pie-option logic. With this change, both
build variations work.
"make TARGETS=kvm kselftest"
"make -C tools/testing/selftests/kvm"
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the new ioctl(WDIOC_GETSUPPORT) call in place, add a command
line option to show the watchdog_info.
Suggested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The newly added optional file argument does not validate if the
file is indeed a watchdog, e.g.:
./watchdog-test -f /dev/zero
Watchdog Ticking Away!
Fix it by confirming that the WDIOC_GETSUPPORT ioctl succeeds.
Fixes: a4864a33f5 ("selftests: watchdog: Add optional file argument")
Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
server_fd needs to be closed if pthread can't be created.
Fixes: e3e02e1d9c ("selftests/bpf: test_progs: convert test_sockopt_inherit")
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20191001173728.149786-3-brianvv@google.com
server_fd needs to be closed if pthread can't be created.
Fixes: 8a03222f50 ("selftests/bpf: test_progs: fix client/server race in tcp_rtt")
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20191001173728.149786-2-brianvv@google.com
Commit a745f7af3c ("selftests/harness: Add 30 second timeout per
test") solves the problem of kselftest_harness.h-using binary tests
possibly hanging forever. However, scripts and other binaries can still
hang forever. This adds a global timeout to each test script run.
To make this configurable (e.g. as needed in the "rtc" test case),
include a new per-test-directory "settings" file (similar to "config")
that can contain kselftest-specific settings. The first recognized field
is "timeout".
Additionally, this splits the reporting for timeouts into a specific
"TIMEOUT" not-ok (and adds exit code reporting in the remaining case).
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A TARGET which failed to be built/installed should not be included in the
runlist generated inside the run_kselftest.sh script.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Let the user specify an optional TARGETS skiplist through the new optional
SKIP_TARGETS Makefile variable.
It is easier to skip at will using a reduced and well defined list of
possibly problematic targets with SKIP_TARGETS than to provide a partially
stripped down list of good targets using the usual TARGETS variable.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add kselftest-all target to build tests from the top level
Makefile. This is to simplify kselftest use-cases for CI and
distributions where build and test systems are different.
Current kselftest target builds and runs tests on a development
system which is a developer use-case.
Add kselftest-install target to install tests from the top level
Makefile. This is to simplify kselftest use-cases for CI and
distributions where build and test systems are different.
This change addresses requests from developers and testers to add
support for installing kselftest from the main Makefile.
In addition, make the install directory the same when install is
run using "make kselftest-install" or by running kselftest_install.sh.
Also fix the INSTALL_PATH variable conflict between main Makefile and
selftests Makefile.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
bcc uses libbpf repo as a submodule. It brings in libbpf source
code and builds everything together to produce shared libraries.
With latest libbpf, I got the following errors:
/bin/ld: libbcc_bpf.so.0.10.0: version node not found for symbol xsk_umem__create@LIBBPF_0.0.2
/bin/ld: failed to set dynamic section sizes: Bad value
collect2: error: ld returned 1 exit status
make[2]: *** [src/cc/libbcc_bpf.so.0.10.0] Error 1
In xsk.c, we have
asm(".symver xsk_umem__create_v0_0_2, xsk_umem__create@LIBBPF_0.0.2");
asm(".symver xsk_umem__create_v0_0_4, xsk_umem__create@@LIBBPF_0.0.4");
The linker thinks the built is for LIBBPF but cannot find proper version
LIBBPF_0.0.2/4, so emit errors.
I also confirmed that using libbpf.a to produce a shared library also
has issues:
-bash-4.4$ cat t.c
extern void *xsk_umem__create;
void * test() { return xsk_umem__create; }
-bash-4.4$ gcc -c -fPIC t.c
-bash-4.4$ gcc -shared t.o libbpf.a -o t.so
/bin/ld: t.so: version node not found for symbol xsk_umem__create@LIBBPF_0.0.2
/bin/ld: failed to set dynamic section sizes: Bad value
collect2: error: ld returned 1 exit status
-bash-4.4$
Symbol versioning does happens in commonly used libraries, e.g., elfutils
and glibc. For static libraries, for a versioned symbol, the old definitions
will be ignored, and the symbol will be an alias to the latest definition.
For example, glibc sched_setaffinity is versioned.
-bash-4.4$ readelf -s /usr/lib64/libc.so.6 | grep sched_setaffinity
756: 000000000013d3d0 13 FUNC GLOBAL DEFAULT 13 sched_setaffinity@GLIBC_2.3.3
757: 00000000000e2e70 455 FUNC GLOBAL DEFAULT 13 sched_setaffinity@@GLIBC_2.3.4
1800: 0000000000000000 0 FILE LOCAL DEFAULT ABS sched_setaffinity.c
4228: 00000000000e2e70 455 FUNC LOCAL DEFAULT 13 __sched_setaffinity_new
4648: 000000000013d3d0 13 FUNC LOCAL DEFAULT 13 __sched_setaffinity_old
7338: 000000000013d3d0 13 FUNC GLOBAL DEFAULT 13 sched_setaffinity@GLIBC_2
7380: 00000000000e2e70 455 FUNC GLOBAL DEFAULT 13 sched_setaffinity@@GLIBC_
-bash-4.4$
For static library, the definition of sched_setaffinity aliases to the new definition.
-bash-4.4$ readelf -s /usr/lib64/libc.a | grep sched_setaffinity
File: /usr/lib64/libc.a(sched_setaffinity.o)
8: 0000000000000000 455 FUNC GLOBAL DEFAULT 1 __sched_setaffinity_new
12: 0000000000000000 455 FUNC WEAK DEFAULT 1 sched_setaffinity
For both elfutils and glibc, additional macros are used to control different handling
of symbol versioning w.r.t static and shared libraries.
For elfutils, the macro is SYMBOL_VERSIONING
(https://sourceware.org/git/?p=elfutils.git;a=blob;f=lib/eu-config.h).
For glibc, the macro is SHARED
(https://sourceware.org/git/?p=glibc.git;a=blob;f=include/shlib-compat.h;hb=refs/heads/master)
This patch used SHARED as the macro name. After this patch, the libbpf.a has
-bash-4.4$ readelf -s libbpf.a | grep xsk_umem__create
372: 0000000000017145 1190 FUNC GLOBAL DEFAULT 1 xsk_umem__create_v0_0_4
405: 0000000000017145 1190 FUNC GLOBAL DEFAULT 1 xsk_umem__create
499: 00000000000175eb 103 FUNC GLOBAL DEFAULT 1 xsk_umem__create_v0_0_2
-bash-4.4$
No versioned symbols for xsk_umem__create.
The libbpf.a can be used to build a shared library succesfully.
-bash-4.4$ cat t.c
extern void *xsk_umem__create;
void * test() { return xsk_umem__create; }
-bash-4.4$ gcc -c -fPIC t.c
-bash-4.4$ gcc -shared t.o libbpf.a -o t.so
-bash-4.4$
Fixes: 10d30e3017 ("libbpf: add flags to umem config")
Cc: Kevin Laatz <kevin.laatz@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Return errno when open_memstream() fails and add two new speciall error
codes for when an invalid, non BPF file or one without BTF is passed to
symbol__disassemble_bpf(), so that its callers can rely on
symbol__strerror_disassemble() to convert that to a human readable error
message that can help figure out what is wrong, with hints even.
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Song Liu <songliubraving@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-usevw9r2gcipfcrbpaueurw0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We should return errno or the annotation extra range understood by
symbol__strerror_disassemble() instead of -1, fix it, returning ENOMEM
instead.
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-8of1cmj3rz0mppfcshc9bbqq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They are called from symbol__annotate() and to propagate errors that can
help understand the problem make them return what
symbol__strerror_disassemble() known, i.e. errno codes and other
annotation specific errors in a special, out of errnos, range.
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-pqx7srcv7tixgid251aeboj6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were just returning -1 in symbol__annotate() when symbol__annotate()
failed, propagate its error as it is used later to pass to
symbol__strerror_disassemble() to present a error message to the user,
that in some cases were getting:
"Invalid -1 error code"
Fix it to propagate the error.
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-0tj89rs9g7nbcyd5skadlvuu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Callers of symbol__annotate() expect a errno value or some other
extended error value range in symbol__strerror_disassemble() to
convert to a proper error string, fix it when propagating a failure to
find the arch specific annotation routines via arch__find(arch_name).
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-o0k6dw7cas0vvmjjvgsyvu1i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The callers of symbol__annotate2() use symbol__strerror_disassemble() to
convert its failure returns into a human readable string, so
propagate error values from functions it calls, starting with
perf_env__arch() that when fails the right thing to do is to look at
'errno' to see why its possible call to uname() failed.
Reported-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/n/tip-it5d83kyusfhb1q1b0l4pxzs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. if evsel->evlist or evsel->evlist->env isn't set, return the
environment for the running machine, as that would be set if reading
from a perf.data file.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-uqq4grmhbi12rwb0lfpo6lfu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For consistency, propagate the exact cause for get_cpuid() to have
failed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-9ig269f7ktnhh99g4l15vpu2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Intel fixed counters use a special table to override the JSON
information.
During this override the period information from the JSON file got
dropped, which results in inst_retired.any and similar running with
frequency mode instead of a period.
Just specify the expected period in the table.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20190927233546.11533-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the LBR data and the instructions in a binary do not match the loop
printing instructions could get confused and print a long stream of
bogus <bad> instructions.
The problem was that if the instruction decoder cannot decode an
instruction it ilen wasn't initialized, so the loop going through the
basic block would continue with the previous value.
Harden the code to avoid such problems:
- Make sure ilen is always freshly initialized and is 0 for bad
instructions.
- Do not overrun the code buffer while printing instructions
- Print a warning message if the final jump is not on an instruction
boundary.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20190927233546.11533-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Specification claims latest version of jitdump file format is 2. Current
jit dump reading code treats 1 as the latest version.
Correct spec to match code.
The original language made it unclear the value to be written in the
magic field.
Revise language that the writer always writes the same value. Specify
that the reader uses the value to detect endian mismatches.
Signed-off-by: Steve MacLean <Steve.MacLean@Microsoft.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Brian Robbins <brianrob@microsoft.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Keeping <john@metanate.com>
Cc: John Salem <josalem@microsoft.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tom McDonald <thomas.mcdonald@microsoft.com>
Link: http://lore.kernel.org/lkml/BN8PR21MB1362F63CDE7AC69736FC7F9EF7800@BN8PR21MB1362.namprd21.prod.outlook.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
During perf inject --jit, JIT_CODE_MOVE records were injecting MMAP records
with an incorrect filename. Specifically it was missing the ".so" suffix.
Further the JIT_CODE_LOAD record were silently truncating the
jr->load.code_index field to 32 bits before generating the filename.
Make both records emit the same filename based on the full 64 bit
code_index field.
Fixes: 9b07e27f88 ("perf inject: Add jitdump mmap injection support")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Steve MacLean <Steve.MacLean@Microsoft.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Brian Robbins <brianrob@microsoft.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: John Keeping <john@metanate.com>
Cc: John Salem <josalem@microsoft.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom McDonald <thomas.mcdonald@microsoft.com>
Link: http://lore.kernel.org/lkml/BN8PR21MB1362FF8F127B31DBF4121528F7800@BN8PR21MB1362.namprd21.prod.outlook.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Whenever an mmap/mmap2 event occurs, the map tree must be updated to add a new
entry. If a new map overlaps a previous map, the overlapped section of the
previous map is effectively unmapped, but the non-overlapping sections are
still valid.
maps__fixup_overlappings() is responsible for creating any new map entries from
the previously overlapped map. It optionally creates a before and an after map.
When creating the after map the existing code failed to adjust the map.pgoff.
This meant the new after map would incorrectly calculate the file offset
for the ip. This results in incorrect symbol name resolution for any ip in the
after region.
Make maps__fixup_overlappings() correctly populate map.pgoff.
Add an assert that new mapping matches old mapping at the beginning of
the after map.
Committer-testing:
Validated correct parsing of libcoreclr.so symbols from .NET Core 3.0 preview9
(which didn't strip symbols).
Preparation:
~/dotnet3.0-preview9/dotnet new webapi -o perfSymbol
cd perfSymbol
~/dotnet3.0-preview9/dotnet publish
perf record ~/dotnet3.0-preview9/dotnet \
bin/Debug/netcoreapp3.0/publish/perfSymbol.dll
^C
Before:
perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\
grep libcoreclr.so | head -n 4
dotnet 1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \
r-xp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.705249: 250000 cpu-clock: \
7fe6159a1f99 [unknown] \
(.../3.0.0-preview9-19423-09/libcoreclr.so)
After:
perf script --show-mmap-events 2>&1 | grep -e MMAP -e unknown |\
grep libcoreclr.so | head -n 4
dotnet 1907 373352.698780: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615726000(0x768000) @ 0 08:02 5510620 765057155]: \
r-xp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701091: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615974000(0x1000) @ 0x24e000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
dotnet 1907 373352.701241: PERF_RECORD_MMAP2 1907/1907: \
[0x7fe615c42000(0x1000) @ 0x51c000 08:02 5510620 765057155]: \
rwxp .../3.0.0-preview9-19423-09/libcoreclr.so
All the [unknown] symbols were resolved.
Signed-off-by: Steve MacLean <Steve.MacLean@Microsoft.com>
Tested-by: Brian Robbins <brianrob@microsoft.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Cc: John Keeping <john@metanate.com>
Cc: John Salem <josalem@microsoft.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom McDonald <thomas.mcdonald@microsoft.com>
Link: http://lore.kernel.org/lkml/BN8PR21MB136270949F22A6A02335C238F7800@BN8PR21MB1362.namprd21.prod.outlook.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the pmu-events directory for JSON file definitions use the
official machine name IBM z15 instead of machine type number
8561. This is consistent with previous machines.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20190927081147.18345-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add s390 transaction counter definition for machine 8561. This is the
same file as for the predecessor machine.
Fixes: 6e67d77d67 ("perf vendor events s390: Add JSON files for machine type 8561")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20190927081147.18345-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'test_dir' variable is assigned to the 'release' array which is
out-of-scope 3 lines later.
Extend the scope of the 'release' array so that an out-of-scope array
isn't accessed.
Bug detected by clang's address sanitizer.
Fixes: 07bc5c699a ("perf tools: Make fetch_kernel_version() publicly available")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/20190926220018.25402-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
200824f55e ("KVM: s390: Disallow invalid bits in kvm_valid_regs and kvm_dirty_regs")
4a53d99dd0 ("KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode")
7396d337cf ("KVM: x86: Return to userspace with internal error on unexpected exit reason")
92f35b751c ("KVM: arm/arm64: vgic: Allow more than 256 vcpus for KVM_IRQ_LINE")
None of them trigger any changes in tooling, this time this is just to silence
these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h'
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/kvm.h' differs from latest version at 'arch/s390/include/uapi/asm/kvm.h'
diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h'
diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Liran Alon <liran.alon@oracle.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Link: https://lkml.kernel.org/n/tip-akuugvvjxte26kzv23zp5d2z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
78a1b96bcf ("fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS ioctl")
23c688b540 ("fscrypt: allow unprivileged users to add/remove keys for v2 policies")
5dae460c22 ("fscrypt: v2 encryption policy support")
5a7e29924d ("fscrypt: add FS_IOC_GET_ENCRYPTION_KEY_STATUS ioctl")
b1c0ec3599 ("fscrypt: add FS_IOC_REMOVE_ENCRYPTION_KEY ioctl")
22d94f493b ("fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl")
3b6df59bc4 ("fscrypt: use FSCRYPT_* definitions, not FS_*")
2336d0deb2 ("fscrypt: use FSCRYPT_ prefix for uapi constants")
7af0ab0d3a ("fs, fscrypt: move uapi definitions to new header <linux/fscrypt.h>")
That don't trigger any changes in tooling, as it so far is used only
for:
$ grep -l 'fs\.h' tools/perf/trace/beauty/*.sh | xargs grep regex=
tools/perf/trace/beauty/rename_flags.sh:regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+RENAME_([[:alnum:]_]+)[[:space:]]+\(1[[:space:]]*<<[[:space:]]*([[:xdigit:]]+)[[:space:]]*\)[[:space:]]*.*'
tools/perf/trace/beauty/sync_file_range.sh:regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+SYNC_FILE_RANGE_([[:alnum:]_]+)[[:space:]]+([[:xdigit:]]+)[[:space:]]*.*'
tools/perf/trace/beauty/usbdevfs_ioctl.sh:regex="^#[[:space:]]*define[[:space:]]+USBDEVFS_(\w+)(\(\w+\))?[[:space:]]+_IO[CWR]{0,2}\([[:space:]]*(_IOC_\w+,[[:space:]]*)?'U'[[:space:]]*,[[:space:]]*([[:digit:]]+).*"
tools/perf/trace/beauty/usbdevfs_ioctl.sh:regex="^#[[:space:]]*define[[:space:]]+USBDEVFS_(\w+)[[:space:]]+_IO[WR]{0,2}\([[:space:]]*'U'[[:space:]]*,[[:space:]]*([[:digit:]]+).*"
$
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/fs.h' differs from latest version at 'include/uapi/linux/fs.h'
diff -u tools/include/uapi/linux/fs.h include/uapi/linux/fs.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-44g48exl9br9ba0t64chqb4i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from:
4ed3350539 ("USB: usbfs: Add a capability flag for runtime suspend")
7794f486ed ("usbfs: Add ioctls for runtime power management")
This triggers these changes in the kernel sources, automagically
supporting these new ioctls in the 'perf trace' beautifiers.
Soon this will be used in things like filter expressions for tracepoints
in 'perf record', 'perf trace', 'perf top', i.e. filter expressions will
do a lookup to turn things like USBDEVFS_WAIT_FOR_RESUME into _IO('U',
35) before associating the tracepoint expression to tracepoint perf
event.
$ tools/perf/trace/beauty/usbdevfs_ioctl.sh > before
$ cp include/uapi/linux/usbdevice_fs.h tools/include/uapi/linux/usbdevice_fs.h
$ git diff
diff --git a/tools/include/uapi/linux/usbdevice_fs.h b/tools/include/uapi/linux/usbdevice_fs.h
index 78efe870c2b7..cf525cddeb94 100644
--- a/tools/include/uapi/linux/usbdevice_fs.h
+++ b/tools/include/uapi/linux/usbdevice_fs.h
@@ -158,6 +158,7 @@ struct usbdevfs_hub_portinfo {
#define USBDEVFS_CAP_MMAP 0x20
#define USBDEVFS_CAP_DROP_PRIVILEGES 0x40
#define USBDEVFS_CAP_CONNINFO_EX 0x80
+#define USBDEVFS_CAP_SUSPEND 0x100
/* USBDEVFS_DISCONNECT_CLAIM flags & struct */
@@ -223,5 +224,8 @@ struct usbdevfs_streams {
* extending size of the data returned.
*/
#define USBDEVFS_CONNINFO_EX(len) _IOC(_IOC_READ, 'U', 32, len)
+#define USBDEVFS_FORBID_SUSPEND _IO('U', 33)
+#define USBDEVFS_ALLOW_SUSPEND _IO('U', 34)
+#define USBDEVFS_WAIT_FOR_RESUME _IO('U', 35)
#endif /* _UAPI_LINUX_USBDEVICE_FS_H */
$ tools/perf/trace/beauty/usbdevfs_ioctl.sh > after
$ diff -u before after
--- before 2019-09-27 11:41:50.634867620 -0300
+++ after 2019-09-27 11:42:07.453102978 -0300
@@ -24,6 +24,9 @@
[30] = "DROP_PRIVILEGES",
[31] = "GET_SPEED",
[32] = "CONNINFO_EX",
+ [33] = "FORBID_SUSPEND",
+ [34] = "ALLOW_SUSPEND",
+ [35] = "WAIT_FOR_RESUME",
[3] = "RESETEP",
[4] = "SETINTERFACE",
[5] = "SETCONFIGURATION",
$
This addresses the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/usbdevice_fs.h' differs from latest version at 'include/uapi/linux/usbdevice_fs.h'
diff -u tools/include/uapi/linux/usbdevice_fs.h include/uapi/linux/usbdevice_fs.h
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-x1rb109b9nfi7pukota82xhj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
1a4e58cce8 ("mm: introduce MADV_PAGEOUT")
9c276cc65a ("mm: introduce MADV_COLD")
That result in these changes in the tools:
$ tools/perf/trace/beauty/madvise_behavior.sh > before
$ cp include/uapi/asm-generic/mman-common.h tools/include/uapi/asm-generic/mman-common.h
$ git diff
diff --git a/tools/include/uapi/asm-generic/mman-common.h b/tools/include/uapi/asm-generic/mman-common.h
index 63b1f506ea67..c160a5354eb6 100644
--- a/tools/include/uapi/asm-generic/mman-common.h
+++ b/tools/include/uapi/asm-generic/mman-common.h
@@ -67,6 +67,9 @@
#define MADV_WIPEONFORK 18 /* Zero memory on fork, child only */
#define MADV_KEEPONFORK 19 /* Undo MADV_WIPEONFORK */
+#define MADV_COLD 20 /* deactivate these pages */
+#define MADV_PAGEOUT 21 /* reclaim these pages */
+
/* compatibility flags */
#define MAP_FILE 0
$ tools/perf/trace/beauty/madvise_behavior.sh > after
$ diff -u before after
--- before 2019-09-27 11:29:43.346320100 -0300
+++ after 2019-09-27 11:30:03.838570439 -0300
@@ -16,6 +16,8 @@
[17] = "DODUMP",
[18] = "WIPEONFORK",
[19] = "KEEPONFORK",
+ [20] = "COLD",
+ [21] = "PAGEOUT",
[100] = "HWPOISON",
[101] = "SOFT_OFFLINE",
};
$
I.e. now when madvise gets those behaviours as args, it will be able to
translate from the number to a human readable string.
This addresses the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h'
diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-n40y6c4sa49p29q6sl8w3ufx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Fixed a buffer overflow by checking nr_args correctly in probes
- Fixed a warning that is reported by clang
- Fixed a possible memory leak in error path of filter processing
- Fixed the selftest that checks for failures, but wasn't failing
- Minor clean up on call site output of a memory trace event
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXZEP5hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhrSAQDlws8rY/vJN4tKL1YaBTRyS5OW+1B+
LPLOxm9PBuzt0wEArVunv7iMgvRzp5spbmCqmD8Is2vSf+45KSrb10WU2wo=
=L37R
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"A few more tracing fixes:
- Fix a buffer overflow by checking nr_args correctly in probes
- Fix a warning that is reported by clang
- Fix a possible memory leak in error path of filter processing
- Fix the selftest that checks for failures, but wasn't failing
- Minor clean up on call site output of a memory trace event"
* tag 'trace-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
selftests/ftrace: Fix same probe error test
mm, tracing: Print symbol name for call_site in trace events
tracing: Have error path in predicate_parse() free its allocated memory
tracing: Fix clang -Wint-in-bool-context warnings in IF_ASSIGN macro
tracing/probe: Fix to check the difference of nr_args before adding probe
make TARGETS=bpf kselftest fails with:
Makefile:127: tools/build/Makefile.include: No such file or directory
When the bpf tool make is invoked from tools Makefile, srctree is
cleared and the current logic check for srctree equals to empty
string to determine srctree location from CURDIR.
When the build in invoked from selftests/bpf Makefile, the srctree
is set to "." and the same logic used for srctree equals to empty is
needed to determine srctree.
Check building_out_of_srctree undefined as the condition for both
cases to fix "make TARGETS=bpf kselftest" build failure.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20190927011344.4695-1-skhan@linuxfoundation.org
- Complete the reworks to interoperate with powerpc dynamic huge page sizes
- Fix a crash due to missed accounting for the powerpc 'struct
page'-memmap mapping granularity.
- Fix badblock initialization for volatile (DRAM emulated) pmem ranges.
- Stop triggering request_key() notifications to userspace when
NVDIMM-security is disabled / not present.
- Miscellaneous small fixups.
-----BEGIN PGP SIGNATURE-----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=Z6Fa
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fixes-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
More libnvdimm updates from Dan Williams:
- Complete the reworks to interoperate with powerpc dynamic huge page
sizes
- Fix a crash due to missed accounting for the powerpc 'struct
page'-memmap mapping granularity
- Fix badblock initialization for volatile (DRAM emulated) pmem ranges
- Stop triggering request_key() notifications to userspace when
NVDIMM-security is disabled / not present
- Miscellaneous small fixups
* tag 'libnvdimm-fixes-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/region: Enable MAP_SYNC for volatile regions
libnvdimm: prevent nvdimm from requesting key when security is disabled
libnvdimm/region: Initialize bad block for volatile namespaces
libnvdimm/nfit_test: Fix acpi_handle redefinition
libnvdimm/altmap: Track namespace boundaries in altmap
libnvdimm: Fix endian conversion issues
libnvdimm/dax: Pick the right alignment default when creating dax devices
powerpc/book3s64: Export has_transparent_hugepage() related functions.
Pull networking fixes from David Miller:
1) Sanity check URB networking device parameters to avoid divide by
zero, from Oliver Neukum.
2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
don't work properly. Longer term this needs a better fix tho. From
Vijay Khemka.
3) Small fixes to selftests (use ping when ping6 is not present, etc.)
from David Ahern.
4) Bring back rt_uses_gateway member of struct rtable, it's semantics
were not well understood and trying to remove it broke things. From
David Ahern.
5) Move usbnet snaity checking, ignore endpoints with invalid
wMaxPacketSize. From Bjørn Mork.
6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.
7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
Alex Vesker, and Yevgeny Kliteynik
8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.
9) Fix crash when removing sch_cbs entry while offloading is enabled,
from Vinicius Costa Gomes.
10) Signedness bug fixes, generally in looking at the result given by
of_get_phy_mode() and friends. From Dan Crapenter.
11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.
12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.
13) Fix quantization code in tcp_bbr, from Kevin Yang.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
net: tap: clean up an indentation issue
nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
sk_buff: drop all skb extensions on free and skb scrubbing
tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
Documentation: Clarify trap's description
mlxsw: spectrum: Clear VLAN filters during port initialization
net: ena: clean up indentation issue
NFC: st95hf: clean up indentation issue
net: phy: micrel: add Asym Pause workaround for KSZ9021
net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
ptp: correctly disable flags on old ioctls
lib: dimlib: fix help text typos
net: dsa: microchip: Always set regmap stride to 1
nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
...
The "same probe" selftest that tests that adding the same probe fails
doesn't add the same probe and passes, which fails the test.
Fixes: b78b94b821 ("selftests/ftrace: Update kprobe event error testcase")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
An assortment of fixes that were either missed by me, or didn't arrive quite in
time for the first v5.4 pull.
Most notable is a fix for an issue with tlbie (broadcast TLB invalidation) on
Power9, when using the Radix MMU. The tlbie can race with an mtpid (move to PID
register, essentially MMU context switch) on another thread of the core, which
can cause stores to continue to go to a page after it's unmapped.
A fix in our KVM code to add a missing barrier, the lack of which has been
observed to cause missed IPIs and subsequently stuck CPUs in the host.
A change to the way we initialise PCR (Processor Compatibility Register) to make
it forward compatible with future CPUs.
On some older PowerVM systems our H_BLOCK_REMOVE support could oops, fix it to
detect such systems and fallback to the old invalidation method.
A fix for an oops seen on some machines when using KASAN on 32-bit.
A handful of other minor fixes, and two new selftests.
Thanks to:
Alistair Popple, Aneesh Kumar K.V, Christophe Leroy, Gustavo Romero, Joel
Stanley, Jordan Niethe, Laurent Dufour, Michael Roth, Oliver O'Halloran.
-----BEGIN PGP SIGNATURE-----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=dF42
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"An assortment of fixes that were either missed by me, or didn't arrive
quite in time for the first v5.4 pull.
- Most notable is a fix for an issue with tlbie (broadcast TLB
invalidation) on Power9, when using the Radix MMU. The tlbie can
race with an mtpid (move to PID register, essentially MMU context
switch) on another thread of the core, which can cause stores to
continue to go to a page after it's unmapped.
- A fix in our KVM code to add a missing barrier, the lack of which
has been observed to cause missed IPIs and subsequently stuck CPUs
in the host.
- A change to the way we initialise PCR (Processor Compatibility
Register) to make it forward compatible with future CPUs.
- On some older PowerVM systems our H_BLOCK_REMOVE support could
oops, fix it to detect such systems and fallback to the old
invalidation method.
- A fix for an oops seen on some machines when using KASAN on 32-bit.
- A handful of other minor fixes, and two new selftests.
Thanks to: Alistair Popple, Aneesh Kumar K.V, Christophe Leroy,
Gustavo Romero, Joel Stanley, Jordan Niethe, Laurent Dufour, Michael
Roth, Oliver O'Halloran"
* tag 'powerpc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/eeh: Fix eeh eeh_debugfs_break_device() with SRIOV devices
powerpc/nvdimm: use H_SCM_QUERY hcall on H_OVERLAP error
powerpc/nvdimm: Use HCALL error as the return value
selftests/powerpc: Add test case for tlbie vs mtpidr ordering issue
powerpc/mm: Fixup tlbie vs mtpidr/mtlpidr ordering issue on POWER9
powerpc/book3s64/radix: Rename CPU_FTR_P9_TLBIE_BUG feature flag
powerpc/book3s64/mm: Don't do tlbie fixup for some hardware revisions
powerpc/pseries: Call H_BLOCK_REMOVE when supported
powerpc/pseries: Read TLB Block Invalidate Characteristics
KVM: PPC: Book3S HV: use smp_mb() when setting/clearing host_ipi flag
powerpc/mm: Fix an Oops in kasan_mmu_init()
powerpc/mm: Add a helper to select PAGE_KERNEL_RO or PAGE_READONLY
powerpc/64s: Set reserved PCR bits
powerpc: Fix definition of PCR bits to work with old binutils
powerpc/book3s64/radix: Remove WARN_ON in destroy_context()
powerpc/tm: Add tm-poison test
Pull scheduler fixes from Ingo Molnar:
- Apply a number of membarrier related fixes and cleanups, which fixes
a use-after-free race in the membarrier code
- Introduce proper RCU protection for tasks on the runqueue - to get
rid of the subtle task_rcu_dereference() interface that was easy to
get wrong
- Misc fixes, but also an EAS speedup
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Avoid redundant EAS calculation
sched/core: Remove double update_max_interval() call on CPU startup
sched/core: Fix preempt_schedule() interrupt return comment
sched/fair: Fix -Wunused-but-set-variable warnings
sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr()
sched/membarrier: Return -ENOMEM to userspace on memory allocation failure
sched/membarrier: Skip IPIs when mm->mm_users == 1
selftests, sched/membarrier: Add multi-threaded test
sched/membarrier: Fix p->mm->membarrier_state racy load
sched/membarrier: Call sync_core only before usermode for same mm
sched/membarrier: Remove redundant check
sched/membarrier: Fix private expedited registration check
tasks, sched/core: RCUify the assignment of rq->curr
tasks, sched/core: With a grace period after finish_task_switch(), remove unnecessary code
tasks, sched/core: Ensure tasks are available for a grace period after leaving the runqueue
tasks: Add a count of task RCU users
sched/core: Convert vcpu_is_preempted() from macro to an inline function
sched/fair: Remove unused cfs_rq_clock_task() function
Pull integrity updates from Mimi Zohar:
"The major feature in this time is IMA support for measuring and
appraising appended file signatures. In addition are a couple of bug
fixes and code cleanup to use struct_size().
In addition to the PE/COFF and IMA xattr signatures, the kexec kernel
image may be signed with an appended signature, using the same
scripts/sign-file tool that is used to sign kernel modules.
Similarly, the initramfs may contain an appended signature.
This contained a lot of refactoring of the existing appended signature
verification code, so that IMA could retain the existing framework of
calculating the file hash once, storing it in the IMA measurement list
and extending the TPM, verifying the file's integrity based on a file
hash or signature (eg. xattrs), and adding an audit record containing
the file hash, all based on policy. (The IMA support for appended
signatures patch set was posted and reviewed 11 times.)
The support for appended signature paves the way for adding other
signature verification methods, such as fs-verity, based on a single
system-wide policy. The file hash used for verifying the signature and
the signature, itself, can be included in the IMA measurement list"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: ima_api: Use struct_size() in kzalloc()
ima: use struct_size() in kzalloc()
sefltest/ima: support appended signatures (modsig)
ima: Fix use after free in ima_read_modsig()
MODSIGN: make new include file self contained
ima: fix freeing ongoing ahash_request
ima: always return negative code for error
ima: Store the measurement again when appraising a modsig
ima: Define ima-modsig template
ima: Collect modsig
ima: Implement support for module-style appended signatures
ima: Factor xattr_verify() out of ima_appraise_measurement()
ima: Add modsig appraise_type option for module-style appended signatures
integrity: Select CONFIG_KEYS instead of depending on it
PKCS#7: Introduce pkcs7_get_digest()
PKCS#7: Refactor verify_pkcs7_signature()
MODSIGN: Export module signature definitions
ima: initialize the "template" field with the default template
* The usual accuracy improvements for nested virtualization
* The usual round of code cleanups from Sean
* Added back optimizations that were prematurely removed in 5.2
(the bare minimum needed to fix the regression was in 5.3-rc8,
here comes the rest)
* Support for UMWAIT/UMONITOR/TPAUSE
* Direct L2->L0 TLB flushing when L0 is Hyper-V and L1 is KVM
* Tell Windows guests if SMT is disabled on the host
* More accurate detection of vmexit cost
* Revert a pvqspinlock pessimization
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdjfaKAAoJEL/70l94x66D8MAH/2thJnM47tYtMTFA4GBFugeH
mAx8OApWFBo8apOip+8ElFLPQ8FQdZCzr9ti8H4JkuzKxgsxCs1iqEg5pHEKxSTi
K9kLOZwoFtwgy3XmxC0PIZ9lT2Wx74ruh1HF+QG/YsjKH636UPv2VpmulsTNbm62
2ryzOb3TlGT/cjf+gv9l6IYIxZa2Ff19PF4i//H8u4YRBj358/jr99CK01iE0M9r
4NhEKiQZywzREWtKxymGOM6HEbwbWcIa+loYjj2htq8epep6f9Y1zQ0Jcn5+nPA0
cn1T2gGJAJ0OUahKLwNbz8pzrFDkW+eoQgqCBJZ4RT9Uf8WCESfl14p+/vRkAMg=
=tk5S
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"x86 KVM changes:
- The usual accuracy improvements for nested virtualization
- The usual round of code cleanups from Sean
- Added back optimizations that were prematurely removed in 5.2 (the
bare minimum needed to fix the regression was in 5.3-rc8, here
comes the rest)
- Support for UMWAIT/UMONITOR/TPAUSE
- Direct L2->L0 TLB flushing when L0 is Hyper-V and L1 is KVM
- Tell Windows guests if SMT is disabled on the host
- More accurate detection of vmexit cost
- Revert a pvqspinlock pessimization"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (56 commits)
KVM: nVMX: cleanup and fix host 64-bit mode checks
KVM: vmx: fix build warnings in hv_enable_direct_tlbflush() on i386
KVM: x86: Don't check kvm_rebooting in __kvm_handle_fault_on_reboot()
KVM: x86: Drop ____kvm_handle_fault_on_reboot()
KVM: VMX: Add error handling to VMREAD helper
KVM: VMX: Optimize VMX instruction error and fault handling
KVM: x86: Check kvm_rebooting in kvm_spurious_fault()
KVM: selftests: fix ucall on x86
Revert "locking/pvqspinlock: Don't wait if vCPU is preempted"
kvm: nvmx: limit atomic switch MSRs
kvm: svm: Intercept RDPRU
kvm: x86: Add "significant index" flag to a few CPUID leaves
KVM: x86/mmu: Skip invalid pages during zapping iff root_count is zero
KVM: x86/mmu: Explicitly track only a single invalid mmu generation
KVM: x86/mmu: Revert "KVM: x86/mmu: Remove is_obsolete() call"
KVM: x86/mmu: Revert "Revert "KVM: MMU: reclaim the zapped-obsolete page first""
KVM: x86/mmu: Revert "Revert "KVM: MMU: collapse TLB flushes when zap all pages""
KVM: x86/mmu: Revert "Revert "KVM: MMU: zap pages in batch""
KVM: x86/mmu: Revert "Revert "KVM: MMU: add tracepoint for kvm_mmu_invalidate_all_pages""
KVM: x86/mmu: Revert "Revert "KVM: MMU: show mmu_valid_gen in shadow page related tracepoints""
...
When a port is created, its VLAN filters are not cleared by the
firmware. This causes tagged packets to be later dropped by the ingress
STP filters, which default to DISCARD state.
The above did not matter much until commit b5ce611fd9 ("mlxsw:
spectrum: Add devlink-trap support") where we exposed the drop reason to
users.
Without this patch, the drop reason users will see is not consistent. If
a port is enslaved to a VLAN-aware bridge and a packet with an invalid
VLAN tries to ingress the bridge, it will be dropped due to ingress STP
filter. If the VLAN is later enabled and then disabled, the packet will
be dropped by the ingress VLAN filter despite the above being a
seemingly NOP operation.
Fix this by clearing all the VLAN filters during port initialization.
Adjust the test accordingly.
Fixes: b5ce611fd9 ("mlxsw: spectrum: Add devlink-trap support")
Reported-by: Alex Kushnarov <alexanderk@mellanox.com>
Tested-by: Alex Kushnarov <alexanderk@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When KVM_GET_MSRS fail the report looks like
==== Test Assertion Failure ====
lib/x86_64/processor.c:1089: r == nmsrs
pid=28775 tid=28775 - Argument list too long
1 0x000000000040a55f: vcpu_save_state at processor.c:1088 (discriminator 3)
2 0x00000000004010e3: main at state_test.c:171 (discriminator 4)
3 0x00007fb8e69223d4: ?? ??:0
4 0x0000000000401287: _start at ??:?
Unexpected result from KVM_GET_MSRS, r: 36 (failed at 194)
and it's not obvious that '194' here is the failed MSR index and that
it's printed in hex. Change that.
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf 2019-09-27
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix libbpf's BTF dumper to not skip anonymous enum definitions, from Andrii.
2) Fix BTF verifier issues when handling the BTF of vmlinux, from Alexei.
3) Fix nested calls into bpf_event_output() from TCP sockops BPF
programs, from Allan.
4) Fix NULL pointer dereference in AF_XDP's xsk map creation when
allocation fails, from Jonathan.
5) Remove unneeded 64 byte alignment requirement of the AF_XDP UMEM
headroom, from Bjorn.
6) Remove unused XDP_OPTIONS getsockopt() call which results in an error
on older kernels, from Toke.
7) Fix a client/server race in tcp_rtt BPF kselftest case, from Stanislav.
8) Fix indentation issue in BTF's btf_enum_check_kflag_member(), from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
To pick the change in:
bf73fc0fa9 ("drm/i915: Show support for accurate sw PMU busyness tracking")
That don't result in any changes in tooling, just silences this perf
build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-o651nt7vpz93tu3nmx4f3xql@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With this change if a perf_date parameter is provided to asciidoc then
it will override the default date written to the man page metadata.
Without this change, or if the perf_date isn't specified, then the
current date is written to the metadata.
Having this parameter allows the metadata to be constant if builds
happen on different dates.
The name of the parameter is intended to be consistent with the existing
perf_version parameter.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20190921041327.155054-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An optimized build such as:
make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-O3
will turn the dereference operation into a ud2 instruction, raising a
SIGILL rather than a SIGSEGV. Use raise(..) for correctness and clarity.
Similar issues were addressed in Numfor Mbiziwo-Tiapo's patch:
https://lkml.org/lkml/2019/7/8/1234
Committer testing:
Before:
[root@quaco ~]# perf test hooks
55: perf hooks : Ok
[root@quaco ~]# perf test -v hooks
55: perf hooks :
--- start ---
test child forked, pid 17092
SIGSEGV is observed as expected, try to recover.
Fatal error (SEGFAULT) in perf hook 'test'
test child finished with 0
---- end ----
perf hooks: Ok
[root@quaco ~]#
After:
[root@quaco ~]# perf test hooks
55: perf hooks : Ok
[root@quaco ~]# perf test -v hooks
55: perf hooks :
--- start ---
test child forked, pid 17909
SIGSEGV is observed as expected, try to recover.
Fatal error (SEGFAULT) in perf hook 'test'
test child finished with 0
---- end ----
perf hooks: Ok
[root@quaco ~]#
Fixes: a074865e60 ("perf tools: Introduce perf hooks")
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lore.kernel.org/lkml/20190925195924.152834-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check that accesses by nested guests are logged according to the
L1 physical addresses rather than L2.
Most of the patch is really adding EPT support to the testing
framework.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull more perf updates from Ingo Molnar:
"The only kernel change is comment typo fixes.
The rest is mostly tooling fixes, but also new vendor event additions
and updates, a bigger libperf/libtraceevent library and a header files
reorganization that came in a bit late"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (108 commits)
perf unwind: Fix libunwind build failure on i386 systems
perf parser: Remove needless include directives
perf build: Add detection of java-11-openjdk-devel package
perf jvmti: Include JVMTI support for s390
perf vendor events: Remove P8 HW events which are not supported
perf evlist: Fix access of freed id arrays
perf stat: Fix free memory access / memory leaks in metrics
perf tools: Replace needless mmap.h with what is needed, event.h
perf evsel: Move config terms to a separate header
perf evlist: Remove unused perf_evlist__fprintf() method
perf evsel: Introduce evsel_fprintf.h
perf evsel: Remove need for symbol_conf in evsel_fprintf.c
perf copyfile: Move copyfile routines to separate files
libperf: Add perf_evlist__poll() function
libperf: Add perf_evlist__add_pollfd() function
libperf: Add perf_evlist__alloc_pollfd() function
libperf: Add libperf_init() call to the tests
libperf: Merge libperf_set_print() into libperf_init()
libperf: Add libperf dependency for tests targets
libperf: Use sys/types.h to get ssize_t, not unistd.h
...
Naresh Kamboju reported, that on the i386 build pr_err()
doesn't get defined properly due to header ordering:
perf-in.o: In function `libunwind__x86_reg_id':
tools/perf/util/libunwind/../../arch/x86/util/unwind-libunwind.c:109:
undefined reference to `pr_err'
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge more updates from Andrew Morton:
- almost all of the rest of -mm
- various other subsystems
Subsystems affected by this patch series:
memcg, misc, core-kernel, lib, checkpatch, reiserfs, fat, fork,
cpumask, kexec, uaccess, kconfig, kgdb, bug, ipc, lzo, kasan, madvise,
cleanups, pagemap
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (77 commits)
arch/sparc/include/asm/pgtable_64.h: fix build
mm: treewide: clarify pgtable_page_{ctor,dtor}() naming
ntfs: remove (un)?likely() from IS_ERR() conditions
IB/hfi1: remove unlikely() from IS_ERR*() condition
xfs: remove unlikely() from WARN_ON() condition
wimax/i2400m: remove unlikely() from WARN*() condition
fs: remove unlikely() from WARN_ON() condition
xen/events: remove unlikely() from WARN() condition
checkpatch: check for nested (un)?likely() calls
hexagon: drop empty and unused free_initrd_mem
mm: factor out common parts between MADV_COLD and MADV_PAGEOUT
mm: introduce MADV_PAGEOUT
mm: change PAGEREF_RECLAIM_CLEAN with PAGE_REFRECLAIM
mm: introduce MADV_COLD
mm: untag user pointers in mmap/munmap/mremap/brk
vfio/type1: untag user pointers in vaddr_get_pfn
tee/shm: untag user pointers in tee_shm_register
media/v4l2-core: untag user pointers in videobuf_dma_contig_user_get
drm/radeon: untag user pointers in radeon_gem_userptr_ioctl
drm/amdgpu: untag user pointers
...
BTF-to-C converter previously skipped anonymous enums in an assumption
that those are embedded in struct's field definitions. This is not
always the case and a lot of kernel constants are defined as part of
anonymous enums. This change fixes the logic by eagerly marking all
types as either referenced by any other type or not. This is enough to
distinguish two classes of anonymous enums and emit previously omitted
enum definitions.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20190925203745.3173184-1-andriin@fb.com
Commit 7d9e5f4221 removed references from certain dsts, but accounting
for this never translated down into the fib6 suppression code. This bug
was triggered by WireGuard users who use wg-quick(8), which uses the
"suppress-prefix" directive to ip-rule(8) for routing all of their
internet traffic without routing loops. The test case added here
causes the reference underflow by causing packets to evaluate a suppress
rule.
Fixes: 7d9e5f4221 ("ipv6: convert major tx path to use RT6_LOOKUP_F_DST_NOREF")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the definition of the RBCOMPUTE function. The propagate callback
repeatedly calls RBCOMPUTE as it moves from leaf to root. it wants to
stop recomputing once the augmented subtree information doesn't change.
This was previously checked using the == operator, but that only works
when the augmented subtree information is a scalar field. This commit
modifies the RBCOMPUTE function so that it now sets the augmented subtree
information instead of returning it, and returns a boolean value
indicating if the propagate callback should stop.
The motivation for this change is that I want to introduce augmented
rbtree uses where the augmented data for the subtree is a struct instead
of a scalar.
Link: http://lkml.kernel.org/r/20190703040156.56953-4-walken@google.com
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add RB_DECLARE_CALLBACKS_MAX, which generates augmented rbtree callbacks
for the case where the augmented value is a scalar whose definition
follows a max(f(node)) pattern. This actually covers all present uses of
RB_DECLARE_CALLBACKS, and saves some (source) code duplication in the
various RBCOMPUTE function definitions.
[walken@google.com: fix mm/vmalloc.c]
Link: http://lkml.kernel.org/r/CANN689FXgK13wDYNh1zKxdipeTuALG4eKvKpsdZqKFJ-rvtGiQ@mail.gmail.com
[walken@google.com: re-add check to check_augmented()]
Link: http://lkml.kernel.org/r/20190727022027.GA86863@google.com
Link: http://lkml.kernel.org/r/20190703040156.56953-3-walken@google.com
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "make RB_DECLARE_CALLBACKS more generic", v3.
These changes are intended to make the RB_DECLARE_CALLBACKS macro more
generic (allowing the aubmented subtree information to be a struct instead
of a scalar).
I have verified the compiled lib/interval_tree.o and mm/mmap.o files to
check that they didn't change. This held as expected for interval_tree.o;
mmap.o did have some changes which could be reverted by marking
__vma_link_rb as noinline. I did not add such a change to the patchset; I
felt it was reasonable enough to leave the inlining decision up to the
compiler.
This patch (of 3):
Add a short comment summarizing the arguments to RB_DECLARE_CALLBACKS.
The arguments are also now capitalized. This copies the style of the
INTERVAL_TREE_DEFINE macro.
No functional changes in this commit, only comments and capitalization.
Link: http://lkml.kernel.org/r/20190703040156.56953-2-walken@google.com
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As was already noted in rbtree.h, the logic to cache rb_first (or
rb_last) can easily be implemented externally to the core rbtree api.
This commit takes the changes applied to the include/linux/ and lib/
rbtree files in 9f973cb380 ("lib/rbtree: avoid generating code twice
for the cached versions"), and applies these to the
tools/include/linux/ and tools/lib/ files as well to keep them
synchronized.
Link: http://lkml.kernel.org/r/20190703034812.53002-1-walken@google.com
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some recent changes in latest Clang started causing the following
warning when unrolling strobemeta test case main loop:
progs/strobemeta.h:416:2: warning: loop not unrolled: the optimizer was
unable to perform the requested transformation; the transformation might
be disabled or specified as part of an unsupported transformation
ordering [-Wpass-failed=transform-warning]
This patch simplifies loop's exit condition to depend only on constant
max iteration number (STROBE_MAX_MAP_ENTRIES), while moving early
termination logic inside the loop body. The changes are equivalent from
program logic standpoint, but fixes the warning. It also appears to
improve generated BPF code, as it fixes previously failing non-unrolled
strobemeta test cases.
Cc: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Remove no longer used variables and avoid compiler warnings.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Some compilers emit warning for potential uninitialized next_id usage.
The code is correct, but control flow is too complicated for some
compilers to figure this out. Re-initialize next_id to satisfy
compiler.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This is the same problem I found earlier in test_sockopt_inherit:
there is a race between server thread doing accept() and client
thread doing connect(). Let's explicitly synchronize them via
pthread conditional variable.
v2:
* don't exit from server_thread without signaling condvar,
fixes possible issue where main() would wait forever (Andrii Nakryiko)
Fixes: b55873984d ("selftests/bpf: test BPF_SOCK_OPS_RTT_CB")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
They go on accumulating there like the debug.h one, that was introduced
here:
f23610245c ("perf list: Add debug support for outputing alias string")
But then, when that need is removed via:
2073ad3326 ("perf tools: Factor out PMU matching in parser")
The thing stays there, so continue the house cleaning spree...
list.h not needed, no macros from there are used, and 'struct
list_head' is in linux/types.h, ditto for util.h, no need for that as
well.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-zkxr3mf6inun8m5mbnil4u0d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With Java 11 there is no seperate JRE anymore.
Details:
https://coderanch.com/t/701603/java/JRE-JDK
Therefore the detection of the JRE needs to be adapted.
This change works for s390 and x86. I have not tested other platforms.
Committer testing:
Continues to work with the OpenJDK 8:
$ rm -f ~acme/lib64/libperf-jvmti.so
$ rpm -qa | grep jdk-devel
java-1.8.0-openjdk-devel-1.8.0.222.b10-0.fc30.x86_64
$ git log --oneline -1
a51937170f33 (HEAD -> perf/core) perf build: Add detection of java-11-openjdk-devel package
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; make -C tools/perf O=/tmp/build/perf install > /dev/null 2>1
$ ls -la ~acme/lib64/libperf-jvmti.so
-rwxr-xr-x. 1 acme acme 230744 Sep 24 16:46 /home/acme/lib64/libperf-jvmti.so
$
Suggested-by: Andreas Krebbel <krebbel@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20190909114116.50469-4-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is to remove following hardware events
from JSON file which are not supported on POWER8.
pm_l3_p0_grp_pump
pm_l3_p0_lco_data
pm_l3_p0_lco_no_data
pm_l3_p0_lco_rty
Note: Unfortunately power8 event list is not publicly available.
Fixes: c3b4d5c4af ("perf vendor events: Remove P8 HW events which are not supported")
Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20190909065624.11956.3992.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I'm not fully sure if this is the correct fix, but without this I get
crashes on more complex perf stat metric usages. The problem is that
part of the state gets freed when a weak group fails, but then is later
still used. Just don't free the ids, we're going to reuse them anyways
on the weak group retry.
For example:
% perf stat -M IpB,IpCall,IpTB,IPC,Retiring_SMT,Frontend_Bound_SMT,Kernel_Utilization,CPU_Utilization --metric-only -a -I 1000 sleep 2
crashes and gives in valgrind:
=21527== Invalid write of size 8
==21527== at 0x4EE582: hlist_add_head (list.h:644)
==21527== by 0x4EFD3C: perf_evlist__id_hash (evlist.c:477)
==21527== by 0x4EFD99: perf_evlist__id_add (evlist.c:483)
==21527== by 0x4EFF15: perf_evlist__id_add_fd (evlist.c:524)
==21527== by 0x4FC693: store_evsel_ids (evsel.c:2969)
==21527== by 0x4FC76C: perf_evsel__store_ids (evsel.c:2986)
==21527== by 0x450DA7: __run_perf_stat (builtin-stat.c:519)
==21527== by 0x451285: run_perf_stat (builtin-stat.c:636)
==21527== by 0x454619: cmd_stat (builtin-stat.c:1966)
==21527== by 0x4D557D: run_builtin (perf.c:310)
==21527== by 0x4D57EA: handle_internal_command (perf.c:362)
==21527== by 0x4D5931: run_argv (perf.c:406)
==21527== Address 0x12e3f008 is 104 bytes inside a block of size 2,056 free'd
==21527== at 0x4839A0C: free (vg_replace_malloc.c:540)
==21527== by 0x627139: xyarray__delete (xyarray.c:32)
==21527== by 0x4F6BE4: perf_evsel__free_id (evsel.c:1253)
==21527== by 0x4FA11F: evsel__close (evsel.c:1994)
==21527== by 0x4F30A3: perf_evlist__reset_weak_group (evlist.c:1783)
==21527== by 0x450B47: __run_perf_stat (builtin-stat.c:466)
==21527== by 0x451285: run_perf_stat (builtin-stat.c:636)
==21527== by 0x454619: cmd_stat (builtin-stat.c:1966)
==21527== by 0x4D557D: run_builtin (perf.c:310)
==21527== by 0x4D57EA: handle_internal_command (perf.c:362)
==21527== by 0x4D5931: run_argv (perf.c:406)
==21527== by 0x4D5CAE: main (perf.c:531)
==21527== Block was alloc'd at
==21527== at 0x483AB1A: calloc (vg_replace_malloc.c:762)
==21527== by 0x627024: zalloc (zalloc.c:8)
==21527== by 0x627088: xyarray__new (xyarray.c:10)
==21527== by 0x4F6B20: perf_evsel__alloc_id (evsel.c:1237)
==21527== by 0x4FC74E: perf_evsel__store_ids (evsel.c:2983)
==21527== by 0x450DA7: __run_perf_stat (builtin-stat.c:519)
==21527== by 0x451285: run_perf_stat (builtin-stat.c:636)
==21527== by 0x454619: cmd_stat (builtin-stat.c:1966)
==21527== by 0x4D557D: run_builtin (perf.c:310)
==21527== by 0x4D57EA: handle_internal_command (perf.c:362)
==21527== by 0x4D5931: run_argv (perf.c:406)
==21527== by 0x4D5CAE: main (perf.c:531)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lore.kernel.org/lkml/20190923233339.25326-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make sure to not free the name passed in by the caller, but free all the
allocated ids when parsing expressions.
The loop at the end knows that the first entry shouldn't be freed, so
make sure the caller name is the first entry.
Fixes
% perf stat -M IpB,IpCall,IpTB,IPC,Retiring_SMT,Frontend_Bound_SMT,Kernel_Utilization,CPU_Utilization --metric-only -a -I 1000 sleep 2
valgrind:
1.009943231 ==21527== Invalid read of size 1
==21527== at 0x483CB74: strcmp (vg_replace_strmem.c:849)
==21527== by 0x582CF8: collect_all_aliases (stat-display.c:554)
==21527== by 0x582EB3: collect_data (stat-display.c:577)
==21527== by 0x583A32: print_counter_aggr (stat-display.c:806)
==21527== by 0x584FAD: perf_evlist__print_counters (stat-display.c:1200)
==21527== by 0x45133A: print_counters (builtin-stat.c:655)
==21527== by 0x450629: process_interval (builtin-stat.c:353)
==21527== by 0x450FBD: __run_perf_stat (builtin-stat.c:564)
==21527== by 0x451285: run_perf_stat (builtin-stat.c:636)
==21527== by 0x454619: cmd_stat (builtin-stat.c:1966)
==21527== by 0x4D557D: run_builtin (perf.c:310)
==21527== by 0x4D57EA: handle_internal_command (perf.c:362)
==21527== Address 0x12826cd0 is 0 bytes inside a block of size 25 free'd
==21527== at 0x4839A0C: free (vg_replace_malloc.c:540)
==21527== by 0x627041: __zfree (zalloc.c:13)
==21527== by 0x57F66A: generic_metric (stat-shadow.c:814)
==21527== by 0x580B21: perf_stat__print_shadow_stats (stat-shadow.c:1057)
==21527== by 0x58418E: print_metric_headers (stat-display.c:943)
==21527== by 0x5844BC: print_interval (stat-display.c:1004)
==21527== by 0x584DEB: perf_evlist__print_counters (stat-display.c:1172)
==21527== by 0x45133A: print_counters (builtin-stat.c:655)
==21527== by 0x450629: process_interval (builtin-stat.c:353)
==21527== by 0x450FBD: __run_perf_stat (builtin-stat.c:564)
==21527== by 0x451285: run_perf_stat (builtin-stat.c:636)
==21527== by 0x454619: cmd_stat (builtin-stat.c:1966)
==21527== Block was alloc'd at
==21527== at 0x483880B: malloc (vg_replace_malloc.c:309)
==21527== by 0x51677DE: strdup (in /usr/lib64/libc-2.29.so)
==21527== by 0x506457: parse_events_name (parse-events.c:1754)
==21527== by 0x5550BB: parse_events_parse (parse-events.y:214)
==21527== by 0x50694D: parse_events__scanner (parse-events.c:1887)
==21527== by 0x506AEF: parse_events (parse-events.c:1927)
==21527== by 0x521D8B: metricgroup__parse_groups (metricgroup.c:527)
==21527== by 0x45156F: parse_metric_groups (builtin-stat.c:721)
==21527== by 0x6228A9: get_value (parse-options.c:243)
==21527== by 0x62363F: parse_short_opt (parse-options.c:348)
==21527== by 0x62363F: parse_options_step (parse-options.c:536)
==21527== by 0x62363F: parse_options_subcommand (parse-options.c:651)
==21527== by 0x453C1D: cmd_stat (builtin-stat.c:1718)
==21527== by 0x4D557D: run_builtin (perf.c:310)
and also a leak report.
Committer testing:
Before:
# perf stat -M IpB,IpCall,IpTB,IPC,Retiring_SMT,Frontend_Bound_SMT,Kernel_Utilization,CPU_Utilization --metric-only -a -I 1000 sleep 2
# time CPU_Utilization
1.000470810 free(): double free detected in tcache 2
Aborted (core dumped)
#
After:
# perf stat -M IpB,IpCall,IpTB,IPC,Retiring_SMT,Frontend_Bound_SMT,Kernel_Utilization,CPU_Utilization --metric-only -a -I 1000 sleep 2
# time CPU_Utilization
1.000494752 0.1
2.001105112 0.1
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lore.kernel.org/lkml/20190923233339.25326-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_sample struct definition and the event_attr_init() are in
util/event.h, but some places were getting it thru an otherwise needless
util/mmap.h header, fix it by including util/event.h directly.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-p1anwyjdbbvghrkl9dlxv7h5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Further reducing the size of util/evsel.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-20zr7di9eynm0272mtjfdhfc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ditch it, noone is using it, one more stdio.h include in a hot header.
Fix the fallout in parse-events.y, where we end up using a FILE pointer,
I think due to YYDEBUG being set and in some places, like Amazon Linux 1
we don't get stdio.h included by luck, like in most other places, add a
explicit stdio.h include directive.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-37k5q0lhdbo2hvvfbnnzn7og@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We already had evsel_fprintf.c, add its counterpart, so that we can
reduce evsel.h a bit more.
We needed a new perf_event_attr_fprintf.c file so as to have a separate
object to link with the python binding in tools/perf/util/python-ext-sources
and not drag symbol_conf, etc into the python binding.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-06bdmt1062d9unzgqmxwlv88@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we an later link it to the python binding without having to
drag the symbol object files.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8823tveyasocnuoelq4qopwf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iJYEABYIAD4WIQRE6pSOnaBC00OEHEIaerohdGur0gUCXYqr6iAcamFya2tvLnNh
a2tpbmVuQGxpbnV4LmludGVsLmNvbQAKCRAaerohdGur0pspAP9pmSqIde7M2BJD
kRmkiannjbl55Ss5+RX+oqOLwtezewEAzgK/vQkm/AWZPqix274qdOMTOX1jjwUZ
JnvsxZrEuQc=
=l6Vw
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-20190925' of git://git.infradead.org/users/jjs/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen.
* tag 'tpmdd-next-20190925' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm: Wrap the buffer from the caller to tpm_buf in tpm_send()
MAINTAINERS: keys: Update path to trusted.h
KEYS: trusted: correctly initialize digests and fix locking issue
selftests/tpm2: Add log and *.pyc to .gitignore
selftests/tpm2: Add the missing TEST_FILES assignment
membarrier commands cover very different code paths if they are in
a single-threaded vs multi-threaded process. Therefore, exercise both
scenarios in the kernel selftests to increase coverage of this selftest.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190919173705.2181-6-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Explicitly check kvm_rebooting in kvm_spurious_fault() prior to invoking
BUG(), as opposed to assuming the caller has already done so. Letting
kvm_spurious_fault() be called "directly" will allow VMX to better
optimize its low level assembly flows.
As a happy side effect, kvm_spurious_fault() no longer needs to be
marked as a dead end since it doesn't unconditionally BUG().
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After commit e8bb4755eea2("KVM: selftests: Split ucall.c into architecture
specific files") selftests which use ucall on x86 started segfaulting and
apparently it's gcc to blame: it "optimizes" ucall() function throwing away
va_start/va_end part because it thinks the structure is not being used.
Previously, it couldn't do that because the there was also MMIO version and
the decision which particular implementation to use was done at runtime.
With older gccs it's possible to solve the problem by adding 'volatile'
to 'struct ucall' but at least with gcc-8.3 this trick doesn't work.
'memory' clobber seems to do the job.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Further reducing the util.c hodgepodge files.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-0i62zh7ok25znibyebgq0qs4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_evlist__poll() from tools/perf to libperf, it will be used in
the following patches.
And rename the existing perf's function to evlist__poll().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-39-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_evlist__add_pollfd() from tools/perf to libperf, it will be
used in the following patches.
Also rename perf's perf_evlist__add_pollfd()/perf_evlist__filter_pollfd()
to evlist__add_pollfd()/evlist__filter_pollfd().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-38-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_evlist__alloc_pollfd() from tools/perf to libperf, it will be
used in the following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-37-jolsa@kernel.org
[ Added api/fd/array.h include to the lib/evlist.c file ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add libperf_init() call to the automated tests.
Committer notes:
Added missing stdarg.h and/or stdio.h to places using vfprintf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-34-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The libperf_set_print() function needs to be called in any case so let's
merge it with libperf_init(), so we have just one init function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-34-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add libperf dependency for tests targets.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-36-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The sys/types.h header looks more sensible, from its name we can gather
it should be there because of some needed typedef, and it is much
smaller than unistd.h, so use it and fix up the fallout in places where
it was being used for something else entirely but being obtained by
sheer luck, indirectly.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-49bn251httu22ymwgipeavmy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That was done just to have users of writen() and readn(), that before
had their prototypes in util/util.h to get it without having to add an
include for internal/lib.h, but the right way is to add it and by now
all places already do it.
Fix a fallout were readlink() was used but unistd.h was being obtained
by luck thru util.h -> internal/lib.h, now to check why unistd.h is
being included there...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-lcnytgrtafey3kwlfog2rzzj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need the 'page_size' variable in libperf, so move it there.
Add a libperf_init() as a global libperf init function to obtain this
value via sysconf() at tool start.
Committer notes:
Add internal/lib.h to tools/perf/ files using 'page_size', sometimes
replacing util.h with it if that was the only reason for having util.h
included.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-33-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the perf_evlist__id_add_fd() function to libperf as an internal
function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-32-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the perf_evlist__id_add() function to libperf as an internal
function. We already have the 'heads' member in 'struct perf_evlist'.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-31-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the perf_evlist__read_format() function to libperf as internal
function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-30-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
