Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave
Hansen)
- Various sched/idle refinements for better idle handling (Nicolas
Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot)
- sched/numa updates and optimizations (Rik van Riel)
- sysbench speedup (Vincent Guittot)
- capacity calculation cleanups/refactoring (Vincent Guittot)
- Various cleanups to thread group iteration (Oleg Nesterov)
- Double-rq-lock removal optimization and various refactorings
(Kirill Tkhai)
- various sched/deadline fixes
... and lots of other changes"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
sched/dl: Use dl_bw_of() under rcu_read_lock_sched()
sched/fair: Delete resched_cpu() from idle_balance()
sched, time: Fix build error with 64 bit cputime_t on 32 bit systems
sched: Improve sysbench performance by fixing spurious active migration
sched/x86: Fix up typo in topology detection
x86, sched: Add new topology for multi-NUMA-node CPUs
sched/rt: Use resched_curr() in task_tick_rt()
sched: Use rq->rd in sched_setaffinity() under RCU read lock
sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask'
sched: Use dl_bw_of() under RCU read lock
sched/fair: Remove duplicate code from can_migrate_task()
sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW
sched: print_rq(): Don't use tasklist_lock
sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock()
sched: Fix the task-group check in tg_has_rt_tasks()
sched/fair: Leverage the idle state info when choosing the "idlest" cpu
sched: Let the scheduler see CPU idle states
sched/deadline: Fix inter- exclusive cpusets migrations
sched/deadline: Clear dl_entity params when setscheduling to different class
sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault()
...
code screem nasty warnings:
WARNING: CPU: 0 PID: 91 at kernel/sched/core.c:7253 __might_sleep+0x9a/0x378()
do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff8d79b511>] event_test_thread+0x48/0x93
Modules linked in:
CPU: 0 PID: 91 Comm: test-events Not tainted 3.17.0-rc7-00109-g2f85d18 #37
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
0000000000000000 ffff880010ec3c80 ffffffff8c696943 ffff880010ec3cb8
ffffffff8be7cae5 ffffffff8bead236 0000000000000001 ffff88001161fa01
0000000000000001 0000000000000000 ffff880010ec3d20 ffffffff8be7cb46
Call Trace:
[<ffffffff8c696943>] dump_stack+0x19/0x1b
[<ffffffff8be7cae5>] warn_slowpath_common+0x8f/0xa8
[<ffffffff8bead236>] ? __might_sleep+0x9a/0x378
[<ffffffff8be7cb46>] warn_slowpath_fmt+0x48/0x50
[<ffffffff8be0dd55>] ? sched_clock+0x9/0xd
[<ffffffff8d79b511>] ? event_test_thread+0x48/0x93
[<ffffffff8d79b511>] ? event_test_thread+0x48/0x93
[<ffffffff8bead236>] __might_sleep+0x9a/0x378
[<ffffffff8c6a0227>] down_read+0x26/0x98
[<ffffffff8be8f503>] exit_signals+0x27/0x1c2
[<ffffffff8be7fedd>] do_exit+0x193/0x10bd
[<ffffffff8bfd1969>] ? kfree+0x4a0/0x4d7
[<ffffffff8d79b4c9>] ? event_trace_self_tests+0x6d7/0x6d7
[<ffffffff8d79b4c9>] ? event_trace_self_tests+0x6d7/0x6d7
[<ffffffff8bea4b65>] kthread+0x156/0x156
[<ffffffff8c69c0f8>] ? wait_for_common+0x3e/0x224
[<ffffffff8bea4a0f>] ? insert_kthread_work+0xe7/0xe7
[<ffffffff8c6a353a>] ret_from_fork+0x7a/0xb0
[<ffffffff8bea4a0f>] ? insert_kthread_work+0xe7/0xe7
---[ end trace 14d02ef17adbc114 ]---
These are triggered by some self tests that run at start up when
configure in. Although the code is technically correct, they are a little
sloppy and not very robust. They work now because it runs at boot up
and the tests do not call anything that might trigger a spurious
wake up. But that doesn't mean those tests wont change in the future.
It's best to clean them now to make sure the tests used to test the
internal workings of the system don't cause breakage themselves.
This also quiets the warnings made by the new checks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUNrcAAAoJEKQekfcNnQGu+oYH/3NaLEKOwQU+x0aL/rfSFB86
qtIq3X4iHGekGjrlN38N2Z36izI9AoYuGrWYReMFy1VcvnRxPAl1mc0y0dZfdW/C
KRLwKTAu0t78Ab8vzyXVDxS+Bs/zEi6V/8HykBFbCthiDz5IbTvxCoeS19O/X9CU
ptVKllUlywjKQD5UMiJwk7eOB5GspOeBgNu9MOh61ZfbYBVsl1hPqmD0gEaSH2Me
wLyDlIyc0P9dfeYeaqYblkiBaXLk2urZDU2Enffi1aueEwwWuN5x+DPGc6d6nGQW
fnworqoiYzz+maQoASwaLdCfJAP3cX5Ye7qWQk7QEtp4Ypdh5j7EacAf9pKEJg8=
=goKt
-----END PGP SIGNATURE-----
Merge tag 'trace-3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Seems that Peter Zijlstra added a new check that is making old code
scream nasty warnings:
WARNING: CPU: 0 PID: 91 at kernel/sched/core.c:7253 __might_sleep+0x9a/0x378()
do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff8d79b511>] event_test_thread+0x48/0x93
Call Trace:
__might_sleep+0x9a/0x378
down_read+0x26/0x98
exit_signals+0x27/0x1c2
do_exit+0x193/0x10bd
kthread+0x156/0x156
ret_from_fork+0x7a/0xb0
These are triggered by some self tests that run at start up when
configure in. Although the code is technically correct, they are a
little sloppy and not very robust. They work now because it runs at
boot up and the tests do not call anything that might trigger a
spurious wake up. But that doesn't mean those tests wont change in
the future.
It's best to clean them now to make sure the tests used to test the
internal workings of the system don't cause breakage themselves.
This also quiets the warnings made by the new checks"
* tag 'trace-3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Clean up scheduling in trace_wakeup_test_thread()
tracing: Robustify wait loop
of the trampoline logic.
The trampoline logic of 3.17 required a descriptor for every function
that is registered to be traced and uses a trampoline. Currently,
only the function graph tracer uses a trampoline, but if you were
to trace all 32,000 (give or take a few thousand) functions with the
function graph tracer, it would create 32,000 descriptors to let us
know that there's a trampoline associated with it. This takes up a bit
of memory when there's a better way to do it.
The redesign now reuses the ftrace_ops' (what registers the function graph
tracer) hash tables. The hash tables tell ftrace what the tracer
wants to trace or doesn't want to trace. There's two of them: one
that tells us what to trace, the other tells us what not to trace.
If the first one is empty, it means all functions should be traced,
otherwise only the ones that are listed should be. The second hash table
tells us what not to trace, and if it is empty, all functions may be
traced, and if there's any listed, then those should not be traced
even if they exist in the first hash table.
It took a bit of massaging, but now these hashes can be used to
keep track of what has a trampoline and what does not, and allows
the ftrace accounting to work. Now we can trace all functions when using
the function graph trampoline, and avoid needing to create any special
descriptors to hold all the functions that are being traced.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUMwp6AAoJEKQekfcNnQGuIoAIAIsqvTYAnULyzKKCweEZYUfb
XJzz6cN5FPGSXkoeda1ZvnfOlHjFRrWNXzXMB0jZYR2hU++pe3xjtghaNzvbRcyV
wlwDUTsnz235OcOuFEspIwBamhtah96Coiwf/2z/2q6srXlHd/1TrqXB+Fpj1tEK
BkAViGDUEdq/eLZX7nGen36cTb5gpNqV9NjY1CVAK6bSkU/xXk/ArqFy1qy0MPnc
z/9bXdIf+Z6VnG/IzwRc2rwiMFuD1+lpjLuHEqagoHp1D4teCjWPSJl1EKCVAS40
GaCOTUZi92zIVgx8Bb28TglSla9MN65CO3E8dw6hlXUIsNz1p0eavpctnC6ac/Y=
=vDpP
-----END PGP SIGNATURE-----
Merge tag 'trace-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This set has a few minor updates, but the big change is the redesign
of the trampoline logic.
The trampoline logic of 3.17 required a descriptor for every function
that is registered to be traced and uses a trampoline. Currently,
only the function graph tracer uses a trampoline, but if you were to
trace all 32,000 (give or take a few thousand) functions with the
function graph tracer, it would create 32,000 descriptors to let us
know that there's a trampoline associated with it. This takes up a
bit of memory when there's a better way to do it.
The redesign now reuses the ftrace_ops' (what registers the function
graph tracer) hash tables. The hash tables tell ftrace what the
tracer wants to trace or doesn't want to trace. There's two of them:
one that tells us what to trace, the other tells us what not to trace.
If the first one is empty, it means all functions should be traced,
otherwise only the ones that are listed should be. The second hash
table tells us what not to trace, and if it is empty, all functions
may be traced, and if there's any listed, then those should not be
traced even if they exist in the first hash table.
It took a bit of massaging, but now these hashes can be used to keep
track of what has a trampoline and what does not, and allows the
ftrace accounting to work. Now we can trace all functions when using
the function graph trampoline, and avoid needing to create any special
descriptors to hold all the functions that are being traced"
* tag 'trace-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Only disable ftrace_enabled to test buffer in selftest
ftrace: Add sanity check when unregistering last ftrace_ops
kernel: trace_syscalls: Replace rcu_assign_pointer() with RCU_INIT_POINTER()
tracing: generate RCU warnings even when tracepoints are disabled
ftrace: Replace tramp_hash with old_*_hash to save space
ftrace: Annotate the ops operation on update
ftrace: Grab any ops for a rec for enabled_functions output
ftrace: Remove freeing of old_hash from ftrace_hash_move()
ftrace: Set callback to ftrace_stub when no ops are registered
ftrace: Add helper function ftrace_ops_get_func()
ftrace: Add separate function for non recursive callbacks
Peter's new debugging tool triggers when tasks exit with !TASK_RUNNING.
The code in trace_wakeup_test_thread() also has a single schedule() call
that should be encompassed by a loop.
This cleans up the code a little to make it a bit more robust and
also makes the return exit properly with TASK_RUNNING.
Link: http://lkml.kernel.org/p/20141008135216.76142204@gandalf.local.home
Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra <peterz@infreadead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The pending nested sleep debugging triggered on the potential stale
TASK_INTERRUPTIBLE in this code.
While there, fix the loop such that we won't revert to a while(1)
yield() 'spin' loop if we ever get a spurious wakeup.
And fix the actual issue by properly terminating the 'wait' loop by
setting TASK_RUNNING.
Link: http://lkml.kernel.org/p/20141008165110.GA14547@worktop.programming.kicks-ass.net
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 651e22f270 "ring-buffer: Always reset iterator to reader page"
fixed one bug but in the process caused another one. The reset is to
update the header page, but that fix also changed the way the cached
reads were updated. The cache reads are used to test if an iterator
needs to be updated or not.
A ring buffer iterator, when created, disables writes to the ring buffer
but does not stop other readers or consuming reads from happening.
Although all readers are synchronized via a lock, they are only
synchronized when in the ring buffer functions. Those functions may
be called by any number of readers. The iterator continues down when
its not interrupted by a consuming reader. If a consuming read
occurs, the iterator starts from the beginning of the buffer.
The way the iterator sees that a consuming read has happened since
its last read is by checking the reader "cache". The cache holds the
last counts of the read and the reader page itself.
Commit 651e22f270 changed what was saved by the cache_read when
the rb_iter_reset() occurred, making the iterator never match the cache.
Then if the iterator calls rb_iter_reset(), it will go into an
infinite loop by checking if the cache doesn't match, doing the reset
and retrying, just to see that the cache still doesn't match! Which
should never happen as the reset is suppose to set the cache to the
current value and there's locks that keep a consuming reader from
having access to the data.
Fixes: 651e22f270 "ring-buffer: Always reset iterator to reader page"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Tasks get their end of stack set to STACK_END_MAGIC with the
aim to catch stack overruns. Currently this feature does not
apply to init_task. This patch removes this restriction.
Note that a similar patch was posted by Prarit Bhargava
some time ago but was never merged:
http://marc.info/?l=linux-kernel&m=127144305403241&w=2
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: aneesh.kumar@linux.vnet.ibm.com
Cc: dzickus@redhat.com
Cc: bmr@redhat.com
Cc: jcastillo@redhat.com
Cc: jgh@redhat.com
Cc: minchan@kernel.org
Cc: tglx@linutronix.de
Cc: hannes@cmpxchg.org
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Daeseok Youn <daeseok.youn@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1410527779-8133-2-git-send-email-atomlin@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The ftrace_enabled variable is set to zero in the self tests to keep
delayed functions from being traced and messing with the checks. This
only needs to be done when the checks are being performed, otherwise,
if ftrace_enabled is off when calls back to the utility that is being
tested, it can cause errors to happen and the tests can fail with
false positives.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the last ftrace_ops is unregistered, all the function records should
have a zeroed flags value. Make sure that is the case when the last ftrace_ops
is unregistered.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The uses of "rcu_assign_pointer()" are NULLing out the pointers.
According to RCU_INIT_POINTER()'s block comment:
"1. This use of RCU_INIT_POINTER() is NULLing out the pointer"
it is better to use it instead of rcu_assign_pointer() because it has a
smaller overhead.
The following Coccinelle semantic patch was used:
@@
@@
- rcu_assign_pointer
+ RCU_INIT_POINTER
(..., NULL)
Link: http://lkml.kernel.org/p/20140822142822.GA32391@ada
Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Allowing function callbacks to declare their own trampolines requires
that each ftrace_ops that has a trampoline must have some sort of
accounting that keeps track of which ops has a trampoline attached
to a record.
The easy way to solve this was to add a "tramp_hash" that created a
hash entry for every function that a ops uses with a trampoline.
But since we can have literally tens of thousands of functions being
traced, that means we need tens of thousands of descriptors to map
the ops to the function in the hash. This is quite expensive and
can cause enabling and disabling the function graph tracer to take
some time to start and stop. It can take up to several seconds to
disable or enable all functions in the function graph tracer for this
reason.
The better approach albeit more complex, is to keep track of how ops
are being enabled and disabled, and use that along with the counting
of the number of ops attached to records, to determive what ops has
a trampoline attached to a record at enabling and disabling of
tracing.
To do this, the tramp_hash has been replaced with an old_filter_hash
and old_notrace_hash, which get the copy of the ops filter_hash and
notrace_hash respectively. The old hashes is kept until the ops has
been modified or removed and the old hashes are used with the logic
of the accounting to determine the ops that have the trampoline of
a record. The reason this has less of a footprint is due to the trick
that an "empty" hash in the filter_hash means "all functions" and
an empty hash in the notrace hash means "no functions" in the hash.
This is much more efficienct, doesn't have the delay, and takes up
much less memory, as we do not need to map all the functions but
just figure out which functions are mapped at the time it is
enabled or disabled.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add three new flags for ftrace_ops:
FTRACE_OPS_FL_ADDING
FTRACE_OPS_FL_REMOVING
FTRACE_OPS_FL_MODIFYING
These will be set for the ftrace_ops when they are first added
to the function tracing, being removed from function tracing
or just having their functions changed from function tracing,
respectively.
This will be needed to remove the tramp_hash, which can grow quite
big. The tramp_hash is used to note what functions a ftrace_ops
is using a trampoline for. Denoting which ftrace_ops is being
modified, will allow us to use the ftrace_ops hashes themselves,
which are much smaller as they have a global flag to denote if
a ftrace_ops is tracing all functions, as well as a notrace hash
if the ftrace_ops is tracing all but a few. The tramp_hash just
creates a hash item for every function, which can go into the 10s
of thousands if all functions are using the ftrace_ops trampoline.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When dumping the enabled_functions, use the first op that is
found with a trampoline to the record, as there should only be
one, as only one ops can be registered to a function that has
a trampoline.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_hash_move() currently frees the old hash that is passed to it
after replacing the pointer with the new hash. Instead of having the
function do that chore, have the caller perform the free.
This lets the ftrace_hash_move() be used a bit more freely, which
is needed for changing the way the trampoline logic is done.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The clean up that adds the helper function ftrace_ops_get_func()
caused the default function to not change when DYNAMIC_FTRACE was not
set and no ftrace_ops were registered. Although static tracing is
not very useful (not having DYNAMIC_FTRACE set), it is still supported
and we don't want to break it.
Clean up the if statement even more to specifically have the default
function call ftrace_stub when no ftrace_ops are registered. This
fixes the small bug for static tracing as well as makes the code a
bit more understandable.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the helper function to what the mcount trampoline is to call
for a ftrace_ops function. This helper will be used by arch code
in the future to set up dynamic trampolines. But as this does the
same tests that are performed in choosing what function to call for
the default mcount trampoline, might as well use it to clean up
the existing code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Instead of using the generic list function for callbacks that
are not recursive, call a new helper function from the mcount
trampoline called ftrace_ops_recur_func() that will do the recursion
checking for the callback.
This eliminates an indirection as well as will help in future code
that will use dynamically allocated trampolines.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Epoll on trace_pipe can sometimes hang in a weird case. If the ring buffer is
empty when we set waiters_pending but an event shows up exactly at that moment
we can miss being woken up by the ring buffers irq work. Since
ring_buffer_empty() is inherently racey we will sometimes think that the buffer
is not empty. So we don't get woken up and we don't think there are any events
even though there were some ready when we added the watch, which makes us hang.
This patch fixes this by making sure that we are actually on the wait list
before we set waiters_pending, and add a memory barrier to make sure
ring_buffer_empty() is going to be correct.
Link: http://lkml.kernel.org/p/1408989581-23727-1-git-send-email-jbacik@fb.com
Cc: stable@vger.kernel.org # 3.10+
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In __ftrace_replace_code(), when converting the call to a nop in a function
it needs to compare against the "curr" (current) value of the ftrace ops, and
not the "new" one. It currently does not affect x86 which is the only arch
to do the trampolines with function graph tracer, but when other archs that do
depend on this code implement the function graph trampoline, it can crash.
Here's an example when ARM uses the trampolines (in the future):
------------[ cut here ]------------
WARNING: CPU: 0 PID: 9 at kernel/trace/ftrace.c:1716 ftrace_bug+0x17c/0x1f4()
Modules linked in: omap_rng rng_core ipv6
CPU: 0 PID: 9 Comm: migration/0 Not tainted 3.16.0-test-10959-gf0094b28f303-dirty #52
[<c02188f4>] (unwind_backtrace) from [<c021343c>] (show_stack+0x20/0x24)
[<c021343c>] (show_stack) from [<c095a674>] (dump_stack+0x78/0x94)
[<c095a674>] (dump_stack) from [<c02532a0>] (warn_slowpath_common+0x7c/0x9c)
[<c02532a0>] (warn_slowpath_common) from [<c02532ec>] (warn_slowpath_null+0x2c/0x34)
[<c02532ec>] (warn_slowpath_null) from [<c02cbac4>] (ftrace_bug+0x17c/0x1f4)
[<c02cbac4>] (ftrace_bug) from [<c02cc44c>] (ftrace_replace_code+0x80/0x9c)
[<c02cc44c>] (ftrace_replace_code) from [<c02cc658>] (ftrace_modify_all_code+0xb8/0x164)
[<c02cc658>] (ftrace_modify_all_code) from [<c02cc718>] (__ftrace_modify_code+0x14/0x1c)
[<c02cc718>] (__ftrace_modify_code) from [<c02c7244>] (multi_cpu_stop+0xf4/0x134)
[<c02c7244>] (multi_cpu_stop) from [<c02c6e90>] (cpu_stopper_thread+0x54/0x130)
[<c02c6e90>] (cpu_stopper_thread) from [<c0271cd4>] (smpboot_thread_fn+0x1ac/0x1bc)
[<c0271cd4>] (smpboot_thread_fn) from [<c026ddf0>] (kthread+0xe0/0xfc)
[<c026ddf0>] (kthread) from [<c020f318>] (ret_from_fork+0x14/0x20)
---[ end trace dc9ce72c5b617d8f ]---
[ 65.047264] ftrace failed to modify [<c0208580>] asm_do_IRQ+0x10/0x1c
[ 65.054070] actual: 85:1b:00:eb
Fixes: 7413af1fb7 "ftrace: Make get_ftrace_addr() and get_ftrace_addr_old() global"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The latest rewrite of ftrace removed the separate ftrace_ops of
the function tracer and the function graph tracer and had them
share the same ftrace_ops. This simplified the accounting by removing
the multiple layers of functions called, where the global_ops func
would call a special list that would iterate over the other ops that
were registered within it (like function and function graph), which
itself was registered to the ftrace ops list of all functions
currently active. If that sounds confusing, the code that implemented
it was also confusing and its removal is a good thing.
The problem with this change was that it assumed that the function
and function graph tracer can never be used at the same time.
This is mostly true, but there is an exception. That is when the
function profiler uses the function graph tracer to profile.
The function profiler can be activated the same time as the function
tracer, and this breaks the assumption and the result is that ftrace
will crash (it detects the error and shuts itself down, it does not
cause a kernel oops).
To solve this issue, a previous change allowed the hash tables
for the functions traced by a ftrace_ops to be a pointer and let
multiple ftrace_ops share the same hash. This allows the function
and function_graph tracer to have separate ftrace_ops, but still
share the hash, which is what is done.
Now the function and function graph tracers have separate ftrace_ops
again, and the function tracer can be run while the function_profile
is active.
Cc: stable@vger.kernel.org # 3.16 (apply after 3.17-rc4 is out)
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Now that a ftrace_hash can be shared by multiple ftrace_ops, they can dec
the rec->flags by more than once (one per those that share the ftrace_hash).
This means that the tramp_hash may not have a hash item when it was added.
For example, if two ftrace_ops share a hash for a ftrace record, and the
first ops has a trampoline, when it adds itself it will set the rec->flags
TRAMP flag and increments its nr_trampolines counter. When the second ops
is added, it must clear that tramp flag but also decrement the other ops
that shares its hash. As the update to the function callbacks has not yet
been performed, the other ops will not have the tramp hash set yet and it
can not be used to know to decrement its nr_trampolines.
Luckily, the tramp_hash does not need to be used. As the ftrace_mutex is
held, a ops with a trampoline to a record during an update of another ops
that shares the record will have its func_hash pointing to it. Since a
trampoline can only be set for a record if only one ops is attached to it,
we can just check if the record has a trampoline (the FTRACE_FL_TRAMP flag
is set) and then find the ops that has this record in its hashes.
Also added some output to help debug when things go wrong.
Cc: stable@vger.kernel.org # 3.16+ (apply after 3.17-rc4 is out)
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When updating what an ftrace_ops traces, if it is registered (that is,
actively tracing), and that ftrace_ops uses the shared global_ops
local_hash, then we need to update all tracers that are active and
also share the global_ops' ftrace_hash_ops.
Cc: stable@vger.kernel.org # 3.16 (apply after 3.17-rc4 is out)
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the top level debug file system function tracer shares its
ftrace_ops with the function graph tracer. This was thought to be fine
because the tracers are not used together, as one can only enable
function or function_graph tracer in the current_tracer file.
But that assumption proved to be incorrect. The function profiler
can use the function graph tracer when function tracing is enabled.
Since all function graph users uses the function tracing ftrace_ops
this causes a conflict and when a user enables both function profiling
as well as the function tracer it will crash ftrace and disable it.
The quick solution so far is to move them as separate ftrace_ops like
it was earlier. The problem though is to synchronize the functions that
are traced because both function and function_graph tracer are limited
by the selections made in the set_ftrace_filter and set_ftrace_notrace
files.
To handle this, a new structure is made called ftrace_ops_hash. This
structure will now hold the filter_hash and notrace_hash, and the
ftrace_ops will point to this structure. That will allow two ftrace_ops
to share the same hashes.
Since most ftrace_ops do not share the hashes, and to keep allocation
simple, the ftrace_ops structure will include both a pointer to the
ftrace_ops_hash called func_hash, as well as the structure itself,
called local_hash. When the ops are registered, the func_hash pointer
will be initialized to point to the local_hash within the ftrace_ops
structure. Some of the ftrace internal ftrace_ops will be initialized
statically. This will allow for the function and function_graph tracer
to have separate ops but still share the same hash tables that determine
what functions they trace.
Cc: stable@vger.kernel.org # 3.16 (apply after 3.17-rc4 is out)
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
rarely ever hit, and requires the user to do something that users rarely
do. It took a few special test cases to even trigger this bug,
and one of them was just one test in the process of finishing up as another
one started.
Both bugs have to do with the ring buffer iterator rb_iter_peek(), but one
is more indirect than the other.
The fist bug fix is simply an increase in the safety net loop counter.
The counter makes sure that the rb_iter_peek() only iterates the number
of times we expect it can, and no more. Well, there was one way it could
iterate one more than we expected, and that caused the ring buffer
to shutdown with a nasty warning. The fix was simply to up that counter by
one.
The other bug has to be with rb_iter_reset() (called by rb_iter_peek()).
This happens when a user reads both the trace_pipe and trace files.
The trace_pipe is a consuming read and does not use the ring buffer
iterator, but the trace file is not a consuming read and does use the
ring buffer iterator. When the trace file is being read, if it detects
that a consuming read occurred, it resets the iterator and starts over.
But the reset code that does this (rb_iter_reset()), checks if the
reader_page is linked to the ring buffer or not, and will look into
the ring buffer itself if it is not. This is wrong, as it should always
try to read the reader page first. Not to mention, the code that looked
into the ring buffer did it wrong, and used the header_page "read" offset
to start reading on that page. That offset is bogus for pages in the
writable ring buffer, and was corrupting the iterator, and it would start
returning bogus events.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJT44tRAAoJEKQekfcNnQGuMVIH/3evbjKT+w6Kon4S0LfLSejl
YDsXYkeO/lGiO3MnUveqq1jfw2+yHtyBVUipvfG0A61urMUhyUvjveph8Ec2cQ4Q
qHl0J28vDfF5tpKiYzygRN01wHD6GXYh+XZSChkA4ItzzD8K51lsZT1Yd+I2pTy2
DgH01EEEYiwYJcih+T4vlbKqYju6pwgxqKNCTv0RdVXUPya/tG9X2Nf8VGQTbmKS
FIO73qObYR+P9iXGIuPfyOxk2EvBiWS15WownZmfhZZxOIKx9IrDYwTsiV1+AJw+
sJFER1ulobYGDtGDa9yyrNJQr6wgbrfCDELnNKmdLUTlSwgZjLXpE2HEmlelY/s=
=5mQl
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull trace file read iterator fixes from Steven Rostedt:
"This contains a fix for two long standing bugs. Both of which are
rarely ever hit, and requires the user to do something that users
rarely do. It took a few special test cases to even trigger this bug,
and one of them was just one test in the process of finishing up as
another one started.
Both bugs have to do with the ring buffer iterator rb_iter_peek(), but
one is more indirect than the other.
The fist bug fix is simply an increase in the safety net loop counter.
The counter makes sure that the rb_iter_peek() only iterates the
number of times we expect it can, and no more. Well, there was one
way it could iterate one more than we expected, and that caused the
ring buffer to shutdown with a nasty warning. The fix was simply to
up that counter by one.
The other bug has to be with rb_iter_reset() (called by
rb_iter_peek()). This happens when a user reads both the trace_pipe
and trace files. The trace_pipe is a consuming read and does not use
the ring buffer iterator, but the trace file is not a consuming read
and does use the ring buffer iterator. When the trace file is being
read, if it detects that a consuming read occurred, it resets the
iterator and starts over. But the reset code that does this
(rb_iter_reset()), checks if the reader_page is linked to the ring
buffer or not, and will look into the ring buffer itself if it is not.
This is wrong, as it should always try to read the reader page first.
Not to mention, the code that looked into the ring buffer did it
wrong, and used the header_page "read" offset to start reading on that
page. That offset is bogus for pages in the writable ring buffer, and
was corrupting the iterator, and it would start returning bogus
events"
* tag 'trace-fixes-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Always reset iterator to reader page
ring-buffer: Up rb_iter_peek() loop count to 3
When performing a consuming read, the ring buffer swaps out a
page from the ring buffer with a empty page and this page that
was swapped out becomes the new reader page. The reader page
is owned by the reader and since it was swapped out of the ring
buffer, writers do not have access to it (there's an exception
to that rule, but it's out of scope for this commit).
When reading the "trace" file, it is a non consuming read, which
means that the data in the ring buffer will not be modified.
When the trace file is opened, a ring buffer iterator is allocated
and writes to the ring buffer are disabled, such that the iterator
will not have issues iterating over the data.
Although the ring buffer disabled writes, it does not disable other
reads, or even consuming reads. If a consuming read happens, then
the iterator is reset and starts reading from the beginning again.
My tests would sometimes trigger this bug on my i386 box:
WARNING: CPU: 0 PID: 5175 at kernel/trace/trace.c:1527 __trace_find_cmdline+0x66/0xaa()
Modules linked in:
CPU: 0 PID: 5175 Comm: grep Not tainted 3.16.0-rc3-test+ #8
Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006
00000000 00000000 f09c9e1c c18796b3 c1b5d74c f09c9e4c c103a0e3 c1b5154b
f09c9e78 00001437 c1b5d74c 000005f7 c10bd85a c10bd85a c1cac57c f09c9eb0
ed0e0000 f09c9e64 c103a185 00000009 f09c9e5c c1b5154b f09c9e78 f09c9e80^M
Call Trace:
[<c18796b3>] dump_stack+0x4b/0x75
[<c103a0e3>] warn_slowpath_common+0x7e/0x95
[<c10bd85a>] ? __trace_find_cmdline+0x66/0xaa
[<c10bd85a>] ? __trace_find_cmdline+0x66/0xaa
[<c103a185>] warn_slowpath_fmt+0x33/0x35
[<c10bd85a>] __trace_find_cmdline+0x66/0xaa^M
[<c10bed04>] trace_find_cmdline+0x40/0x64
[<c10c3c16>] trace_print_context+0x27/0xec
[<c10c4360>] ? trace_seq_printf+0x37/0x5b
[<c10c0b15>] print_trace_line+0x319/0x39b
[<c10ba3fb>] ? ring_buffer_read+0x47/0x50
[<c10c13b1>] s_show+0x192/0x1ab
[<c10bfd9a>] ? s_next+0x5a/0x7c
[<c112e76e>] seq_read+0x267/0x34c
[<c1115a25>] vfs_read+0x8c/0xef
[<c112e507>] ? seq_lseek+0x154/0x154
[<c1115ba2>] SyS_read+0x54/0x7f
[<c188488e>] syscall_call+0x7/0xb
---[ end trace 3f507febd6b4cc83 ]---
>>>> ##### CPU 1 buffer started ####
Which was the __trace_find_cmdline() function complaining about the pid
in the event record being negative.
After adding more test cases, this would trigger more often. Strangely
enough, it would never trigger on a single test, but instead would trigger
only when running all the tests. I believe that was the case because it
required one of the tests to be shutting down via delayed instances while
a new test started up.
After spending several days debugging this, I found that it was caused by
the iterator becoming corrupted. Debugging further, I found out why
the iterator became corrupted. It happened with the rb_iter_reset().
As consuming reads may not read the full reader page, and only part
of it, there's a "read" field to know where the last read took place.
The iterator, must also start at the read position. In the rb_iter_reset()
code, if the reader page was disconnected from the ring buffer, the iterator
would start at the head page within the ring buffer (where writes still
happen). But the mistake there was that it still used the "read" field
to start the iterator on the head page, where it should always start
at zero because readers never read from within the ring buffer where
writes occur.
I originally wrote a patch to have it set the iter->head to 0 instead
of iter->head_page->read, but then I questioned why it wasn't always
setting the iter to point to the reader page, as the reader page is
still valid. The list_empty(reader_page->list) just means that it was
successful in swapping out. But the reader_page may still have data.
There was a bug report a long time ago that was not reproducible that
had something about trace_pipe (consuming read) not matching trace
(iterator read). This may explain why that happened.
Anyway, the correct answer to this bug is to always use the reader page
an not reset the iterator to inside the writable ring buffer.
Cc: stable@vger.kernel.org # 2.6.28+
Fixes: d769041f86 "ring_buffer: implement new locking"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
After writting a test to try to trigger the bug that caused the
ring buffer iterator to become corrupted, I hit another bug:
WARNING: CPU: 1 PID: 5281 at kernel/trace/ring_buffer.c:3766 rb_iter_peek+0x113/0x238()
Modules linked in: ipt_MASQUERADE sunrpc [...]
CPU: 1 PID: 5281 Comm: grep Tainted: G W 3.16.0-rc3-test+ #143
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
0000000000000000 ffffffff81809a80 ffffffff81503fb0 0000000000000000
ffffffff81040ca1 ffff8800796d6010 ffffffff810c138d ffff8800796d6010
ffff880077438c80 ffff8800796d6010 ffff88007abbe600 0000000000000003
Call Trace:
[<ffffffff81503fb0>] ? dump_stack+0x4a/0x75
[<ffffffff81040ca1>] ? warn_slowpath_common+0x7e/0x97
[<ffffffff810c138d>] ? rb_iter_peek+0x113/0x238
[<ffffffff810c138d>] ? rb_iter_peek+0x113/0x238
[<ffffffff810c14df>] ? ring_buffer_iter_peek+0x2d/0x5c
[<ffffffff810c6f73>] ? tracing_iter_reset+0x6e/0x96
[<ffffffff810c74a3>] ? s_start+0xd7/0x17b
[<ffffffff8112b13e>] ? kmem_cache_alloc_trace+0xda/0xea
[<ffffffff8114cf94>] ? seq_read+0x148/0x361
[<ffffffff81132d98>] ? vfs_read+0x93/0xf1
[<ffffffff81132f1b>] ? SyS_read+0x60/0x8e
[<ffffffff8150bf9f>] ? tracesys+0xdd/0xe2
Debugging this bug, which triggers when the rb_iter_peek() loops too
many times (more than 2 times), I discovered there's a case that can
cause that function to legitimately loop 3 times!
rb_iter_peek() is different than rb_buffer_peek() as the rb_buffer_peek()
only deals with the reader page (it's for consuming reads). The
rb_iter_peek() is for traversing the buffer without consuming it, and as
such, it can loop for one more reason. That is, if we hit the end of
the reader page or any page, it will go to the next page and try again.
That is, we have this:
1. iter->head > iter->head_page->page->commit
(rb_inc_iter() which moves the iter to the next page)
try again
2. event = rb_iter_head_event()
event->type_len == RINGBUF_TYPE_TIME_EXTEND
rb_advance_iter()
try again
3. read the event.
But we never get to 3, because the count is greater than 2 and we
cause the WARNING and return NULL.
Up the counter to 3.
Cc: stable@vger.kernel.org # 2.6.37+
Fixes: 69d1b839f7 "ring-buffer: Bind time extend and data events together"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull timer and time updates from Thomas Gleixner:
"A rather large update of timers, timekeeping & co
- Core timekeeping code is year-2038 safe now for 32bit machines.
Now we just need to fix all in kernel users and the gazillion of
user space interfaces which rely on timespec/timeval :)
- Better cache layout for the timekeeping internal data structures.
- Proper nanosecond based interfaces for in kernel users.
- Tree wide cleanup of code which wants nanoseconds but does hoops
and loops to convert back and forth from timespecs. Some of it
definitely belongs into the ugly code museum.
- Consolidation of the timekeeping interface zoo.
- A fast NMI safe accessor to clock monotonic for tracing. This is a
long standing request to support correlated user/kernel space
traces. With proper NTP frequency correction it's also suitable
for correlation of traces accross separate machines.
- Checkpoint/restart support for timerfd.
- A few NOHZ[_FULL] improvements in the [hr]timer code.
- Code move from kernel to kernel/time of all time* related code.
- New clocksource/event drivers from the ARM universe. I'm really
impressed that despite an architected timer in the newer chips SoC
manufacturers insist on inventing new and differently broken SoC
specific timers.
[ Ed. "Impressed"? I don't think that word means what you think it means ]
- Another round of code move from arch to drivers. Looks like most
of the legacy mess in ARM regarding timers is sorted out except for
a few obnoxious strongholds.
- The usual updates and fixlets all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
timekeeping: Fixup typo in update_vsyscall_old definition
clocksource: document some basic timekeeping concepts
timekeeping: Use cached ntp_tick_length when accumulating error
timekeeping: Rework frequency adjustments to work better w/ nohz
timekeeping: Minor fixup for timespec64->timespec assignment
ftrace: Provide trace clocks monotonic
timekeeping: Provide fast and NMI safe access to CLOCK_MONOTONIC
seqcount: Add raw_write_seqcount_latch()
seqcount: Provide raw_read_seqcount()
timekeeping: Use tk_read_base as argument for timekeeping_get_ns()
timekeeping: Create struct tk_read_base and use it in struct timekeeper
timekeeping: Restructure the timekeeper some more
clocksource: Get rid of cycle_last
clocksource: Move cycle_last validation to core code
clocksource: Make delta calculation a function
wireless: ath9k: Get rid of timespec conversions
drm: vmwgfx: Use nsec based interfaces
drm: i915: Use nsec based interfaces
timekeeping: Provide ktime_get_raw()
hangcheck-timer: Use ktime_get_ns()
...
Pull perf changes from Ingo Molnar:
"Kernel side changes:
- Consolidate the PMU interrupt-disabled code amongst architectures
(Vince Weaver)
- misc fixes
Tooling changes (new features, user visible changes):
- Add support for pagefault tracing in 'trace', please see multiple
examples in the changeset messages (Stanislav Fomichev).
- Add pagefault statistics in 'trace' (Stanislav Fomichev)
- Add header for columns in 'top' and 'report' TUI browsers (Jiri
Olsa)
- Add pagefault statistics in 'trace' (Stanislav Fomichev)
- Add IO mode into timechart command (Stanislav Fomichev)
- Fallback to syscalls:* when raw_syscalls:* is not available in the
perl and python perf scripts. (Daniel Bristot de Oliveira)
- Add --repeat global option to 'perf bench' to be used in benchmarks
such as the existing 'futex' one, that was modified to use it
instead of a local option. (Davidlohr Bueso)
- Fix fd -> pathname resolution in 'trace', be it using /proc or a
vfs_getname probe point. (Arnaldo Carvalho de Melo)
- Add suggestion of how to set perf_event_paranoid sysctl, to help
non-root users trying tools like 'trace' to get a working
environment. (Arnaldo Carvalho de Melo)
- Updates from trace-cmd for traceevent plugin_kvm plus args cleanup
(Steven Rostedt, Jan Kiszka)
- Support S/390 in 'perf kvm stat' (Alexander Yarygin)
Tooling infrastructure changes:
- Allow reserving a row for header purposes in the hists browser
(Arnaldo Carvalho de Melo)
- Various fixes and prep work related to supporting Intel PT (Adrian
Hunter)
- Introduce multiple debug variables control (Jiri Olsa)
- Add callchain and additional sample information for python scripts
(Joseph Schuchart)
- More prep work to support Intel PT: (Adrian Hunter)
- Polishing 'script' BTS output
- 'inject' can specify --kallsym
- VDSO is per machine, not a global var
- Expose data addr lookup functions previously private to 'script'
- Large mmap fixes in events processing
- Include standard stringify macros in power pc code (Sukadev
Bhattiprolu)
Tooling cleanups:
- Convert open coded equivalents to asprintf() (Andy Shevchenko)
- Remove needless reassignments in 'trace' (Arnaldo Carvalho de Melo)
- Cache the is_exit syscall test in 'trace) (Arnaldo Carvalho de
Melo)
- No need to reimplement err() in 'perf bench sched-messaging', drop
barf(). (Davidlohr Bueso).
- Remove ev_name argument from perf_evsel__hists_browse, can be
obtained from the other parameters. (Jiri Olsa)
Tooling fixes:
- Fix memory leak in the 'sched-messaging' perf bench test.
(Davidlohr Bueso)
- The -o and -n 'perf bench mem' options are mutually exclusive, emit
error when both are specified. (Davidlohr Bueso)
- Fix scrollbar refresh row index in the ui browser, problem exposed
now that headers will be added and will be allowed to be switched
on/off. (Jiri Olsa)
- Handle the num array type in python properly (Sebastian Andrzej
Siewior)
- Fix wrong condition for allocation failure (Jiri Olsa)
- Adjust callchain based on DWARF debug info on powerpc (Sukadev
Bhattiprolu)
- Fix a risk for doing free on uninitialized pointer in traceevent
lib (Rickard Strandqvist)
- Update attr test with PERF_FLAG_FD_CLOEXEC flag (Jiri Olsa)
- Enable close-on-exec flag on perf file descriptor (Yann Droneaud)
- Fix build on gcc 4.4.7 (Arnaldo Carvalho de Melo)
- Event ordering fixes (Jiri Olsa)"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (123 commits)
Revert "perf tools: Fix jump label always changing during tracing"
perf tools: Fix perf usage string leftover
perf: Check permission only for parent tracepoint event
perf record: Store PERF_RECORD_FINISHED_ROUND only for nonempty rounds
perf record: Always force PERF_RECORD_FINISHED_ROUND event
perf inject: Add --kallsyms parameter
perf tools: Expose 'addr' functions so they can be reused
perf session: Fix accounting of ordered samples queue
perf powerpc: Include util/util.h and remove stringify macros
perf tools: Fix build on gcc 4.4.7
perf tools: Add thread parameter to vdso__dso_findnew()
perf tools: Add dso__type()
perf tools: Separate the VDSO map name from the VDSO dso name
perf tools: Add vdso__new()
perf machine: Fix the lifetime of the VDSO temporary file
perf tools: Group VDSO global variables into a structure
perf session: Add ability to skip 4GiB or more
perf session: Add ability to 'skip' a non-piped event stream
perf tools: Pass machine to vdso__dso_findnew()
perf tools: Add dso__data_size()
...
As he found some small bugs that went into 3.16, and these changes were
based on that, I had to apply his changes to a separate branch than
my main development branch.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJT3533AAoJEKQekfcNnQGuaNkIALM9uf6gvIXgvyAlhK1qfjJL
0pxAlgppukA7hZT9gcubGuStPxKnwtVSvd/GwGI/mc7Ls57vOvdA61TEHN48l2MW
SUev1Jeu1Nx3Wh4B2ivRq+dJadrwU9NwG507yvuXn2L8Gqzwal133dg3AHnsTYgz
yu7oe8baxMniFFYlAmSELFp2cA3kli/WrRuQB7weudbT12jZlpOMqz7OUN9o7dfo
E4XfwkkDUuo9EiKD1QwVMk2cIkCaHFI8lJDYJbrM3L5XJKfnKzZNRMWfwDG2L7hS
DGjMl6T0SjU+ZIoTidHdbyF/Q+I0o9kKTnUrErGu88+2Z1gfEKN5O8zovNMbPUM=
=dT/x
-----END PGP SIGNATURE-----
Merge tag 'trace-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing filter cleanups from Steven Rostedt:
"Oleg Nesterov did several clean ups with the tracing filter code. As
he found some small bugs that went into 3.16, and these changes were
based on that, I had to apply his changes to a separate branch than my
main development branch.
This was based on work that was already pulled into 3.16, and is a
separate pull request to keep from having local merges in my pull
request"
* tag 'trace-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Kill "filter_string" arg of replace_preds()
tracing: Change apply_subsystem_event_filter() paths to check file->system == dir
tracing: Kill ftrace_event_call->files
tracing/uprobes: Kill the dead TRACE_EVENT_FL_USE_CALL_FILTER logic
tracing: Kill call_filter_disable()
tracing: Kill destroy_call_preds()
tracing: Kill destroy_preds() and destroy_file_preds()
to the ftrace function callback infrastructure. It's introducing a
way to allow different functions to call directly different trampolines
instead of all calling the same "mcount" one.
The only user of this for now is the function graph tracer, which always
had a different trampoline, but the function tracer trampoline was called
and did basically nothing, and then the function graph tracer trampoline
was called. The difference now, is that the function graph tracer
trampoline can be called directly if a function is only being traced by
the function graph trampoline. If function tracing is also happening on
the same function, the old way is still done.
The accounting for this takes up more memory when function graph tracing
is activated, as it needs to keep track of which functions it uses.
I have a new way that wont take as much memory, but it's not ready yet
for this merge window, and will have to wait for the next one.
Another big change was the removal of the ftrace_start/stop() calls that
were used by the suspend/resume code that stopped function tracing when
entering into suspend and resume paths. The stop of ftrace was done
because there was some function that would crash the system if one called
smp_processor_id()! The stop/start was a big hammer to solve the issue
at the time, which was when ftrace was first introduced into Linux.
Now ftrace has better infrastructure to debug such issues, and I found
the problem function and labeled it with "notrace" and function tracing
can now safely be activated all the way down into the guts of suspend
and resume.
Other changes include clean ups of uprobe code.
Clean up of the trace_seq() code.
And other various small fixes and clean ups to ftrace and tracing.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJT35zXAAoJEKQekfcNnQGuOz0H/38zqM0nLFhrgvz3EPk2UOjn
xqpX8qyb2V7TJZL+IqeXU2a5cQZl5ba0D4WtBGpxbTae3CJYiuQ87iKUNFoH0om5
FDpn80igb368k8V3qRdRsziKVCCf0XBd/NkHJXc0ZkfXGyzB2Ga4bBxALxp2gj9y
bnO+vKo6+tWYKG4hyQb4P3LRXUrK8/LWEsPr39cH2QH1Rdj69Lx9CgrCdUVJmwcb
Bj8hEiLXL/RYCFNn79A3wNTUvW0rG/AOIf4SLqXtasSRZ0ToaU0ZyDnrNv+0Ol47
rX8tSk+LfXchL9hpIvjCf1vlAYq3pO02favteR/jip3lx/dTjEDE4RJ9qtJzZ4Q=
=fwQY
-----END PGP SIGNATURE-----
Merge tag 'trace-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This pull request has a lot of work done. The main thing is the
changes to the ftrace function callback infrastructure. It's
introducing a way to allow different functions to call directly
different trampolines instead of all calling the same "mcount" one.
The only user of this for now is the function graph tracer, which
always had a different trampoline, but the function tracer trampoline
was called and did basically nothing, and then the function graph
tracer trampoline was called. The difference now, is that the
function graph tracer trampoline can be called directly if a function
is only being traced by the function graph trampoline. If function
tracing is also happening on the same function, the old way is still
done.
The accounting for this takes up more memory when function graph
tracing is activated, as it needs to keep track of which functions it
uses. I have a new way that wont take as much memory, but it's not
ready yet for this merge window, and will have to wait for the next
one.
Another big change was the removal of the ftrace_start/stop() calls
that were used by the suspend/resume code that stopped function
tracing when entering into suspend and resume paths. The stop of
ftrace was done because there was some function that would crash the
system if one called smp_processor_id()! The stop/start was a big
hammer to solve the issue at the time, which was when ftrace was first
introduced into Linux. Now ftrace has better infrastructure to debug
such issues, and I found the problem function and labeled it with
"notrace" and function tracing can now safely be activated all the way
down into the guts of suspend and resume
Other changes include clean ups of uprobe code, clean up of the
trace_seq() code, and other various small fixes and clean ups to
ftrace and tracing"
* tag 'trace-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits)
ftrace: Add warning if tramp hash does not match nr_trampolines
ftrace: Fix trampoline hash update check on rec->flags
ring-buffer: Use rb_page_size() instead of open coded head_page size
ftrace: Rename ftrace_ops field from trampolines to nr_trampolines
tracing: Convert local function_graph functions to static
ftrace: Do not copy old hash when resetting
tracing: let user specify tracing_thresh after selecting function_graph
ring-buffer: Always run per-cpu ring buffer resize with schedule_work_on()
tracing: Remove function_trace_stop and HAVE_FUNCTION_TRACE_MCOUNT_TEST
s390/ftrace: remove check of obsolete variable function_trace_stop
arm64, ftrace: Remove check of obsolete variable function_trace_stop
Blackfin: ftrace: Remove check of obsolete variable function_trace_stop
metag: ftrace: Remove check of obsolete variable function_trace_stop
microblaze: ftrace: Remove check of obsolete variable function_trace_stop
MIPS: ftrace: Remove check of obsolete variable function_trace_stop
parisc: ftrace: Remove check of obsolete variable function_trace_stop
sh: ftrace: Remove check of obsolete variable function_trace_stop
sparc64,ftrace: Remove check of obsolete variable function_trace_stop
tile: ftrace: Remove check of obsolete variable function_trace_stop
ftrace: x86: Remove check of obsolete variable function_trace_stop
...
There's no need to check cloned event's permission once the
parent was already checked.
Also the code is checking 'current' process permissions, which
is not owner process for cloned events, thus could end up with
wrong permission check result.
Reported-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Tested-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1405079782-8139-1-git-send-email-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After adding all the records to the tramp_hash, add a check that makes
sure that the number of records added matches the number of records
expected to match and do a WARN_ON and disable ftrace if they do
not match.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In the loop of ftrace_save_ops_tramp_hash(), it adds all the recs
to the ops hash if the rec has only one callback attached and the
ops is connected to the rec. It gives a nasty warning and shuts down
ftrace if the rec doesn't have a trampoline set for it. But this
can happen with the following scenario:
# cd /sys/kernel/debug/tracing
# echo schedule do_IRQ > set_ftrace_filter
# mkdir instances/foo
# echo schedule > instances/foo/set_ftrace_filter
# echo function_graph > current_function
# echo function > instances/foo/current_function
# echo nop > instances/foo/current_function
The above would then trigger the following warning and disable
ftrace:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 3145 at kernel/trace/ftrace.c:2212 ftrace_run_update_code+0xe4/0x15b()
Modules linked in: ipt_MASQUERADE sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ip [...]
CPU: 1 PID: 3145 Comm: bash Not tainted 3.16.0-rc3-test+ #136
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
0000000000000000 ffffffff81808a88 ffffffff81502130 0000000000000000
ffffffff81040ca1 ffff880077c08000 ffffffff810bd286 0000000000000001
ffffffff81a56830 ffff88007a041be0 ffff88007a872d60 00000000000001be
Call Trace:
[<ffffffff81502130>] ? dump_stack+0x4a/0x75
[<ffffffff81040ca1>] ? warn_slowpath_common+0x7e/0x97
[<ffffffff810bd286>] ? ftrace_run_update_code+0xe4/0x15b
[<ffffffff810bd286>] ? ftrace_run_update_code+0xe4/0x15b
[<ffffffff810bda1a>] ? ftrace_shutdown+0x11c/0x16b
[<ffffffff810bda87>] ? unregister_ftrace_function+0x1e/0x38
[<ffffffff810cc7e1>] ? function_trace_reset+0x1a/0x28
[<ffffffff810c924f>] ? tracing_set_tracer+0xc1/0x276
[<ffffffff810c9477>] ? tracing_set_trace_write+0x73/0x91
[<ffffffff81132383>] ? __sb_start_write+0x9a/0xcc
[<ffffffff8120478f>] ? security_file_permission+0x1b/0x31
[<ffffffff81130e49>] ? vfs_write+0xac/0x11c
[<ffffffff8113115d>] ? SyS_write+0x60/0x8e
[<ffffffff81508112>] ? system_call_fastpath+0x16/0x1b
---[ end trace 938c4415cbc7dc96 ]---
------------[ cut here ]------------
Link: http://lkml.kernel.org/r/20140723120805.GB21376@redhat.com
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a helper function to get a ring buffer page size (the number
of bytes of data recorded on the page), called rb_page_size().
Use that instead of open coding it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Expose the new NMI safe accessor to clock monotonic to the tracer.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Having two fields within the same struct that is off by one character
can be confusing and error prone. Rename the counter "trampolines"
to "nr_trampolines" to explicitly show it is a counter and not to
be confused by the "trampoline" field.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The "uptime" trace clock added in:
commit 8aacf017b0
tracing: Add "uptime" trace clock that uses jiffies
has wraparound problems when the system has been up more
than 1 hour 11 minutes and 34 seconds. It converts jiffies
to nanoseconds using:
(u64)jiffies_to_usecs(jiffy) * 1000ULL
but since jiffies_to_usecs() only returns a 32-bit value, it
truncates at 2^32 microseconds. An additional problem on 32-bit
systems is that the argument is "unsigned long", so fixing the
return value only helps until 2^32 jiffies (49.7 days on a HZ=1000
system).
Avoid these problems by using jiffies_64 as our basis, and
not converting to nanoseconds (we do convert to clock_t because
user facing API must not be dependent on internal kernel
HZ values).
Link: http://lkml.kernel.org/p/99d63c5bfe9b320a3b428d773825a37095bf6a51.1405708254.git.tony.luck@intel.com
Cc: stable@vger.kernel.org # 3.10+
Fixes: 8aacf017b0 "tracing: Add "uptime" trace clock that uses jiffies"
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Do not waste time copying the old hash if the hash is going to be
reset. Just allocate a new hash and free the old one, as that is
the same result as copying te old one and then resetting it.
Link: http://lkml.kernel.org/p/1405384820-48837-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
[ SDR: Removed unused ftrace_filter_reset() function ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, tracing_thresh works only if we specify it before selecting
function_graph tracer. If we do the opposite, tracing_thresh will change
it's value, but it will not be applied.
To fix it, we add update_thresh callback which is called whenever
tracing_thresh is updated and for function_graph tracer we register
handler which reinitializes tracer depending on tracing_thresh.
Link: http://lkml.kernel.org/p/20140718111727.GA3206@stfomichev-desktop.yandex.net
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The code for resizing the trace ring buffers has to run the per-cpu
resize on the CPU itself. The code was using preempt_off() and
running the code for the current CPU directly, otherwise calling
schedule_work_on().
At least on RT this could result in the following:
|BUG: sleeping function called from invalid context at kernel/rtmutex.c:673
|in_atomic(): 1, irqs_disabled(): 0, pid: 607, name: bash
|3 locks held by bash/607:
|CPU: 0 PID: 607 Comm: bash Not tainted 3.12.15-rt25+ #124
|(rt_spin_lock+0x28/0x68)
|(free_hot_cold_page+0x84/0x3b8)
|(free_buffer_page+0x14/0x20)
|(rb_update_pages+0x280/0x338)
|(ring_buffer_resize+0x32c/0x3dc)
|(free_snapshot+0x18/0x38)
|(tracing_set_tracer+0x27c/0x2ac)
probably via
|cd /sys/kernel/debug/tracing/
|echo 1 > events/enable ; sleep 2
|echo 1024 > buffer_size_kb
If we just always use schedule_work_on(), there's no need for the
preempt_off(). So do that.
Link: http://lkml.kernel.org/p/1405537633-31518-1-git-send-email-cminyard@mvista.com
Reported-by: Stanislav Meduna <stano@meduna.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
All users of function_trace_stop and HAVE_FUNCTION_TRACE_MCOUNT_TEST have
been removed. We can safely remove them from the kernel.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
function_trace_stop is no longer used to stop function tracing.
Remove the check from __ftrace_ops_list_func().
Also, call FTRACE_WARN_ON() instead of setting function_trace_stop
if a ops has no func to call.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When function tracing is being updated function_trace_stop is set to
keep from tracing the updates. This was fine when function tracing
was done from stop machine. But it is no longer done that way and
this can cause real tracing to be missed.
Remove it.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
All archs now use ftrace_graph_is_dead() to stop function graph
tracing. Remove the usage of ftrace_stop() as that is no longer
needed.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_stop() is going away as it disables parts of function tracing
that affects users that should not be affected. But ftrace_graph_stop()
is built on ftrace_stop(). Here's another example of killing all of
function tracing because something went wrong with function graph
tracing.
Instead of disabling all users of function tracing on function graph
error, disable only function graph tracing.
A new function is created called ftrace_graph_is_dead(). This is called
in strategic paths to prevent function graph from doing more harm and
allowing at least a warning to be printed before the system crashes.
NOTE: ftrace_stop() is still used until all the archs are converted over
to use ftrace_graph_is_dead(). After that, ftrace_stop() will be removed.
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cosmetic, but replace_preds() doesn't need/use "char *filter_string".
Remove it to microsimplify the code.
Link: http://lkml.kernel.org/p/20140715184832.GA20519@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
