With frame pointers, when a task is interrupted, its stack is no longer
completely reliable because the function could have been interrupted
before it had a chance to save the previous frame pointer on the stack.
So the caller of the interrupted function could get skipped by a stack
trace.
This is problematic for live patching, which needs to know whether a
stack trace of a sleeping task can be relied upon. There's currently no
way to detect if a sleeping task was interrupted by a page fault
exception or preemption before it went to sleep.
Another issue is that when dumping the stack of an interrupted task, the
unwinder has no way of knowing where the saved pt_regs registers are, so
it can't print them.
This solves those issues by encoding the pt_regs pointer in the frame
pointer on entry from an interrupt or an exception.
This patch also updates the unwinder to be able to decode it, because
otherwise the unwinder would be broken by this change.
Note that this causes a change in the behavior of the unwinder: each
instance of a pt_regs on the stack is now considered a "frame". So
callers of unwind_get_return_address() will now get an occasional
'regs->ip' address that would have previously been skipped over.
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/8b9f84a21e39d249049e0547b559ff8da0df0988.1476973742.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnd reported the following objtool warning:
kernel/locking/rwsem.o: warning: objtool: down_write_killable()+0x16: call without frame pointer save/setup
The warning means gcc placed the ____down_write() inline asm (and its
call instruction) before the frame pointer setup in
down_write_killable(), which breaks frame pointer convention and can
result in incorrect stack traces.
Force the stack frame to be created before the call instruction by
listing the stack pointer as an output operand in the inline asm
statement.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1188b7015f04baf361e59de499ee2d7272c59dce.1476393828.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull kbuild updates from Michal Marek:
- EXPORT_SYMBOL for asm source by Al Viro.
This does bring a regression, because genksyms no longer generates
checksums for these symbols (CONFIG_MODVERSIONS). Nick Piggin is
working on a patch to fix this.
Plus, we are talking about functions like strcpy(), which rarely
change prototypes.
- Fixes for PPC fallout of the above by Stephen Rothwell and Nick
Piggin
- fixdep speedup by Alexey Dobriyan.
- preparatory work by Nick Piggin to allow architectures to build with
-ffunction-sections, -fdata-sections and --gc-sections
- CONFIG_THIN_ARCHIVES support by Stephen Rothwell
- fix for filenames with colons in the initramfs source by me.
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (22 commits)
initramfs: Escape colons in depfile
ppc: there is no clear_pages to export
powerpc/64: whitelist unresolved modversions CRCs
kbuild: -ffunction-sections fix for archs with conflicting sections
kbuild: add arch specific post-link Makefile
kbuild: allow archs to select link dead code/data elimination
kbuild: allow architectures to use thin archives instead of ld -r
kbuild: Regenerate genksyms lexer
kbuild: genksyms fix for typeof handling
fixdep: faster CONFIG_ search
ia64: move exports to definitions
sparc32: debride memcpy.S a bit
[sparc] unify 32bit and 64bit string.h
sparc: move exports to definitions
ppc: move exports to definitions
arm: move exports to definitions
s390: move exports to definitions
m68k: move exports to definitions
alpha: move exports to actual definitions
x86: move exports to actual definitions
...
Pull percpu updates from Tejun Heo:
- Nick improved generic implementations of percpu operations which
modify the variable and return so that they calculate the physical
address only once.
- percpu_ref percpu <-> atomic mode switching improvements. The
patchset was originally posted about a year ago but fell through the
crack.
- misc non-critical fixes.
* 'for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
mm/percpu.c: fix potential memory leakage for pcpu_embed_first_chunk()
mm/percpu.c: correct max_distance calculation for pcpu_embed_first_chunk()
percpu: eliminate two sparse warnings
percpu: improve generic percpu modify-return implementation
percpu-refcount: init ->confirm_switch member properly
percpu_ref: allow operation mode switching operations to be called concurrently
percpu_ref: restructure operation mode switching
percpu_ref: unify staggered atomic switching wait behavior
percpu_ref: reorganize __percpu_ref_switch_to_atomic() and relocate percpu_ref_switch_to_atomic()
percpu_ref: remove unnecessary RCU grace period for staggered atomic switching confirmation
Pull uaccess.h prepwork from Al Viro:
"Preparations to tree-wide switch to use of linux/uaccess.h (which,
obviously, will allow to start unifying stuff for real). The last step
there, ie
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
`git grep -l "$PATT"|grep -v ^include/linux/uaccess.h`
is not taken here - I would prefer to do it once just before or just
after -rc1. However, everything should be ready for it"
* 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
remove a stray reference to asm/uaccess.h in docs
sparc64: separate extable_64.h, switch elf_64.h to it
score: separate extable.h, switch module.h to it
mips: separate extable.h, switch module.h to it
x86: separate extable.h, switch sections.h to it
remove stray include of asm/uaccess.h from cacheflush.h
mn10300: remove a bogus processor.h->uaccess.h include
xtensa: split uaccess.h into C and asm sides
bonding: quit messing with IOCTL
kill __kernel_ds_p off
mn10300: finish verify_area() off
frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h
exceptions: detritus removal
Daniel Walker reported problems which happens when
crash_kexec_post_notifiers kernel option is enabled
(https://lkml.org/lkml/2015/6/24/44).
In that case, smp_send_stop() is called before entering kdump routines
which assume other CPUs are still online. As the result, for x86, kdump
routines fail to save other CPUs' registers and disable virtualization
extensions.
To fix this problem, call a new kdump friendly function,
crash_smp_send_stop(), instead of the smp_send_stop() when
crash_kexec_post_notifiers is enabled. crash_smp_send_stop() is a weak
function, and it just call smp_send_stop(). Architecture codes should
override it so that kdump can work appropriately. This patch only
provides x86-specific version.
For Xen's PV kernel, just keep the current behavior.
NOTES:
- Right solution would be to place crash_smp_send_stop() before
__crash_kexec() invocation in all cases and remove smp_send_stop(), but
we can't do that until all architectures implement own
crash_smp_send_stop()
- crash_smp_send_stop()-like work is still needed by
machine_crash_shutdown() because crash_kexec() can be called without
entering panic()
Fixes: f06e5153f4 (kernel/panic.c: add "crash_kexec_post_notifiers" option)
Link: http://lkml.kernel.org/r/20160810080948.11028.15344.stgit@sysi4-13.yrl.intra.hitachi.co.jp
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Reported-by: Daniel Walker <dwalker@fifo99.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Xunlei Pang <xpang@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <david.daney@cavium.com>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: "Steven J. Hill" <steven.hill@cavium.com>
Cc: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull protection keys syscall interface from Thomas Gleixner:
"This is the final step of Protection Keys support which adds the
syscalls so user space can actually allocate keys and protect memory
areas with them. Details and usage examples can be found in the
documentation.
The mm side of this has been acked by Mel"
* 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pkeys: Update documentation
x86/mm/pkeys: Do not skip PKRU register if debug registers are not used
x86/pkeys: Fix pkeys build breakage for some non-x86 arches
x86/pkeys: Add self-tests
x86/pkeys: Allow configuration of init_pkru
x86/pkeys: Default to a restrictive init PKRU
pkeys: Add details of system call use to Documentation/
generic syscalls: Wire up memory protection keys syscalls
x86: Wire up protection keys system calls
x86/pkeys: Allocation/free syscalls
x86/pkeys: Make mprotect_key() mask off additional vm_flags
mm: Implement new pkey_mprotect() system call
x86/pkeys: Add fault handling for PF_PK page fault bit
Pull x86 updates from Thomas Gleixner:
"A pile of regression fixes and updates:
- address the fallout of the patches which made the cpuid - nodeid
relation permanent: Handling of invalid APIC ids and preventing
pointless warning messages.
- force eager FPU when protection keys are enabled. Protection keys
are not generating FPU exceptions so they cannot work with the lazy
FPU mechanism.
- prevent force migration of interrupts which are not part of the CPU
vector domain.
- handle the fact that APIC ids are not updated in the ACPI/MADT
tables on physical CPU hotplug
- remove bash-isms from syscall table generator script
- use the hypervisor supplied APIC frequency when running on VMware"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pkeys: Make protection keys an "eager" feature
x86/apic: Prevent pointless warning messages
x86/acpi: Prevent LAPIC id 0xff from being accounted
arch/x86: Handle non enumerated CPU after physical hotplug
x86/unwind: Fix oprofile module link error
x86/vmware: Skip lapic calibration on VMware
x86/syscalls: Remove bash-isms in syscall table generator
x86/irq: Prevent force migration of irqs which are not in the vector domain
Our XSAVE features are divided into two categories: those that
generate FPU exceptions, and those that do not. MPX and pkeys do
not generate FPU exceptions and thus can not be used lazily. We
disable them when lazy mode is forced on.
We have a pair of masks to collect these two sets of features, but
XFEATURE_MASK_PKRU was added to the wrong mask: XFEATURE_MASK_LAZY.
Fix it by moving the feature to XFEATURE_MASK_EAGER.
Note: this only causes problem if you boot with lazy FPU mode
(eagerfpu=off) which is *not* the default. It also only affects
hardware which is not currently publicly available. It looks like
eager mode is going away, but we still need this patch applied
to any kernel that has protection keys and lazy mode, which is 4.6
through 4.8 at this point, and 4.9 if the lazy removal isn't sent
to Linus for 4.9.
Fixes: c8df400984 ("x86/fpu, x86/mm/pkeys: Add PKRU xsave fields and data structures")
Signed-off-by: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20161007162342.28A49813@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When doing an nmi backtrace of many cores, most of which are idle, the
output is a little overwhelming and very uninformative. Suppress
messages for cpus that are idling when they are interrupted and just
emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN".
We do this by grouping all the cpuidle code together into a new
.cpuidle.text section, and then checking the address of the interrupted
PC to see if it lies within that section.
This commit suitably tags x86 and tile idle routines, and only adds in
the minimal framework for other architectures.
Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm]
Tested-by: Petr Mladek <pmladek@suse.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "improvements to the nmi_backtrace code" v9.
This patch series modifies the trigger_xxx_backtrace() NMI-based remote
backtracing code to make it more flexible, and makes a few small
improvements along the way.
The motivation comes from the task isolation code, where there are
scenarios where we want to be able to diagnose a case where some cpu is
about to interrupt a task-isolated cpu. It can be helpful to see both
where the interrupting cpu is, and also an approximation of where the
cpu that is being interrupted is. The nmi_backtrace framework allows us
to discover the stack of the interrupted cpu.
I've tested that the change works as desired on tile, and build-tested
x86, arm, mips, and sparc64. For x86 I confirmed that the generic
cpuidle stuff as well as the architecture-specific routines are in the
new cpuidle section. For arm, mips, and sparc I just build-tested it
and made sure the generic cpuidle routines were in the new cpuidle
section, but I didn't attempt to figure out which the platform-specific
idle routines might be. That might be more usefully done by someone
with platform experience in follow-up patches.
This patch (of 4):
Currently you can only request a backtrace of either all cpus, or all
cpus but yourself. It can also be helpful to request a remote backtrace
of a single cpu, and since we want that, the logical extension is to
support a cpumask as the underlying primitive.
This change modifies the existing lib/nmi_backtrace.c code to take a
cpumask as its basic primitive, and modifies the linux/nmi.h code to use
the new "cpumask" method instead.
The existing clients of nmi_backtrace (arm and x86) are converted to
using the new cpumask approach in this change.
The other users of the backtracing API (sparc64 and mips) are converted
to use the cpumask approach rather than the all/allbutself approach.
The mips code ignored the "include_self" boolean but with this change it
will now also dump a local backtrace if requested.
Link: http://lkml.kernel.org/r/1472487169-14923-2-git-send-email-cmetcalf@mellanox.com
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm]
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We get 1 warning when building kernel with W=1:
drivers/char/mem.c:220:12: warning: no previous prototype for 'phys_mem_access_prot_allowed' [-Wmissing-prototypes]
int __weak phys_mem_access_prot_allowed(struct file *file,
In fact, its declaration is spreading to several header files in
different architecture, but need to be declare in common header file.
So this patch moves phys_mem_access_prot_allowed() to pgtable.h.
Link: http://lkml.kernel.org/r/1473751597-12139-1-git-send-email-baoyou.xie@linaro.org
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Switch to new CPU hotplug mechanism.
- Support driver_override in pciback.
- Require vector callback for HVM guests (the alternate mechanism via
the platform device has been broken for ages).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJX9lkNAAoJEFxbo/MsZsTRnd8IAKnCH9pd2c1GgAPse2s8yBUL
jh/nTQh+niVvpFA9elpfz+TrAIu4P0KLcnx6jhZ0Uv+Cmeaz5Ps+IaqyXBmqmeCm
hjrnDo6wEVB/1LMtzibNk0hQcIN73MUEIfUESjl1iiIw3lPDPMIihMbpCAzVzaRf
M8sInTTwcx0A9njUijEwT1wKV45hM7bpnAufChkxk3V3G2+JxBDYAQJCfW0u1DjR
WFpbGKyNetXSVSf6QVZhW+lTnqTAUk0a5IqOg6UbzzbsHM7KgzwxB0FXYMRsL8jV
3VNiRJovNy+0F3T1VewPXWFlWs+QFK1GH0Hbncc5kUATNBm/VOjNt8H0dwUlfLM=
=n1rz
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.9-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from David Vrabel:
"xen features and fixes for 4.9:
- switch to new CPU hotplug mechanism
- support driver_override in pciback
- require vector callback for HVM guests (the alternate mechanism via
the platform device has been broken for ages)"
* tag 'for-linus-4.9-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/x86: Update topology map for PV VCPUs
xen/x86: Initialize per_cpu(xen_vcpu, 0) a little earlier
xen/pciback: support driver_override
xen/pciback: avoid multiple entries in slot list
xen/pciback: simplify pcistub device handling
xen: Remove event channel notification through Xen PCI platform device
xen/events: Convert to hotplug state machine
xen/x86: Convert to hotplug state machine
x86/xen: add missing \n at end of printk warning message
xen/grant-table: Use kmalloc_array() in arch_gnttab_valloc()
xen: Make VPMU init message look less scary
xen: rename xen_pmu_init() in sys-hypervisor.c
hotplug: Prevent alloc/free of irq descriptors during cpu up/down (again)
xen/x86: Move irq allocation from Xen smp_op.cpu_up()
All architectures:
Move `make kvmconfig` stubs from x86; use 64 bits for debugfs stats.
ARM:
Important fixes for not using an in-kernel irqchip; handle SError
exceptions and present them to guests if appropriate; proxying of GICV
access at EL2 if guest mappings are unsafe; GICv3 on AArch32 on ARMv8;
preparations for GICv3 save/restore, including ABI docs; cleanups and
a bit of optimizations.
MIPS:
A couple of fixes in preparation for supporting MIPS EVA host kernels;
MIPS SMP host & TLB invalidation fixes.
PPC:
Fix the bug which caused guests to falsely report lockups; other minor
fixes; a small optimization.
s390:
Lazy enablement of runtime instrumentation; up to 255 CPUs for nested
guests; rework of machine check deliver; cleanups and fixes.
x86:
IOMMU part of AMD's AVIC for vmexit-less interrupt delivery; Hyper-V
TSC page; per-vcpu tsc_offset in debugfs; accelerated INS/OUTS in
nVMX; cleanups and fixes.
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJX9iDrAAoJEED/6hsPKofoOPoIAIUlgojkb9l2l1XVDgsXdgQL
sRVhYSVv7/c8sk9vFImrD5ElOPZd+CEAIqFOu45+NM3cNi7gxip9yftUVs7wI5aC
eDZRWm1E4trDZLe54ZM9ThcqZzZZiELVGMfR1+ZndUycybwyWzafpXYsYyaXp3BW
hyHM3qVkoWO3dxBWFwHIoO/AUJrWYkRHEByKyvlC6KPxSdBPSa5c1AQwMCoE0Mo4
K/xUj4gBn9eMelNhg4Oqu/uh49/q+dtdoP2C+sVM8bSdquD+PmIeOhPFIcuGbGFI
B+oRpUhIuntN39gz8wInJ4/GRSeTuR2faNPxMn4E1i1u4LiuJvipcsOjPfe0a18=
=fZRB
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"All architectures:
- move `make kvmconfig` stubs from x86
- use 64 bits for debugfs stats
ARM:
- Important fixes for not using an in-kernel irqchip
- handle SError exceptions and present them to guests if appropriate
- proxying of GICV access at EL2 if guest mappings are unsafe
- GICv3 on AArch32 on ARMv8
- preparations for GICv3 save/restore, including ABI docs
- cleanups and a bit of optimizations
MIPS:
- A couple of fixes in preparation for supporting MIPS EVA host
kernels
- MIPS SMP host & TLB invalidation fixes
PPC:
- Fix the bug which caused guests to falsely report lockups
- other minor fixes
- a small optimization
s390:
- Lazy enablement of runtime instrumentation
- up to 255 CPUs for nested guests
- rework of machine check deliver
- cleanups and fixes
x86:
- IOMMU part of AMD's AVIC for vmexit-less interrupt delivery
- Hyper-V TSC page
- per-vcpu tsc_offset in debugfs
- accelerated INS/OUTS in nVMX
- cleanups and fixes"
* tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (140 commits)
KVM: MIPS: Drop dubious EntryHi optimisation
KVM: MIPS: Invalidate TLB by regenerating ASIDs
KVM: MIPS: Split kernel/user ASID regeneration
KVM: MIPS: Drop other CPU ASIDs on guest MMU changes
KVM: arm/arm64: vgic: Don't flush/sync without a working vgic
KVM: arm64: Require in-kernel irqchip for PMU support
KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register
KVM: PPC: Book3S PR: Support 64kB page size on POWER8E and POWER8NVL
KVM: PPC: Book3S: Remove duplicate setting of the B field in tlbie
KVM: PPC: BookE: Fix a sanity check
KVM: PPC: Book3S HV: Take out virtual core piggybacking code
KVM: PPC: Book3S: Treat VTB as a per-subcore register, not per-thread
ARM: gic-v3: Work around definition of gic_write_bpr1
KVM: nVMX: Fix the NMI IDT-vectoring handling
KVM: VMX: Enable MSR-BASED TPR shadow even if APICv is inactive
KVM: nVMX: Fix reload apic access page warning
kvmconfig: add virtio-gpu to config fragment
config: move x86 kvm_guest.config to a common location
arm64: KVM: Remove duplicating init code for setting VMID
ARM: KVM: Support vgic-v3
...
When compiling on x86 with CONFIG_OPROFILE=m and CONFIG_FRAME_POINTER=n,
the oprofile module fails to link:
ERROR: ftrace_graph_ret_addr" [arch/x86/oprofile/oprofile.ko] undefined!
The problem was introduced when oprofile was converted to use the new
x86 unwinder. When frame pointers are disabled, the "guess" unwinder's
unwind_get_return_address() is an inline function which calls
ftrace_graph_ret_addr(), which is not exported.
Fix it by converting the "guess" version of unwind_get_return_address()
to an exported out-of-line function, just like its frame pointer
counterpart.
Reported-by: Karl Beldan <karl.beldan@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: ec2ad9ccf1 ("oprofile/x86: Convert x86_backtrace() to use the new unwinder")
Link: http://lkml.kernel.org/r/be08d589f6474df78364e081c42777e382af9352.1475731632.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 vdso updates from Ingo Molnar:
"The main changes in this cycle centered around adding support for
32-bit compatible C/R of the vDSO on 64-bit kernels, by Dmitry
Safonov"
* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Use CONFIG_X86_X32_ABI to enable vdso prctl
x86/vdso: Only define map_vdso_randomized() if CONFIG_X86_64
x86/vdso: Only define prctl_map_vdso() if CONFIG_CHECKPOINT_RESTORE
x86/signal: Add SA_{X32,IA32}_ABI sa_flags
x86/ptrace: Down with test_thread_flag(TIF_IA32)
x86/coredump: Use pr_reg size, rather that TIF_IA32 flag
x86/arch_prctl/vdso: Add ARCH_MAP_VDSO_*
x86/vdso: Replace calculate_addr in map_vdso() with addr
x86/vdso: Unmap vdso blob on vvar mapping failure
Pull x86 platform changes from Ingo Molnar:
"The main changes in this cycle were:
- SGI UV updates (Andrew Banman)
- Intel MID updates (Andy Shevchenko)
- Initial Mellanox systems platform (Vadim Pasternak)"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/mellanox: Fix return value check in mlxplat_init()
x86/platform/mellanox: Introduce support for Mellanox systems platform
x86/platform/uv/BAU: Add UV4-specific functions
x86/platform/uv/BAU: Fix payload queue setup on UV4 hardware
x86/platform/uv/BAU: Disable software timeout on UV4 hardware
x86/platform/uv/BAU: Populate ->uvhub_version with UV4 version information
x86/platform/uv/BAU: Use generic function pointers
x86/platform/uv/BAU: Add generic function pointers
x86/platform/uv/BAU: Convert uv_physnodeaddr() use to uv_gpa_to_offset()
x86/platform/uv/BAU: Clean up pq_init()
x86/platform/uv/BAU: Clean up and update printks
x86/platform/uv/BAU: Clean up vertical alignment
x86/platform/intel-mid: Keep SRAM powered on at boot
x86/platform/intel-mid: Add Intel Penwell to ID table
x86/cpu: Rename Merrifield2 to Moorefield
x86/platform/intel-mid: Implement power off sequence
x86/platform/intel-mid: Enable SD card detection on Merrifield
x86/platform/intel-mid: Enable WiFi on Intel Edison
x86/platform/intel-mid: Run PWRMU command immediately
Pull x86 boot updates from Ingo Molnar:
"The changes in this cycle were:
- Save e820 table RAM footprint on larger kernel configurations.
(Denys Vlasenko)
- pmem related fixes (Dan Williams)
- theoretical e820 boundary condition fix (Wei Yang)"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation
x86/e820: Use much less memory for e820/e820_saved, save up to 120k
x86/e820: Prepare e280 code for switch to dynamic storage
x86/e820: Mark some static functions __init
x86/e820: Fix very large 'size' handling boundary condition
Pull low-level x86 updates from Ingo Molnar:
"In this cycle this topic tree has become one of those 'super topics'
that accumulated a lot of changes:
- Add CONFIG_VMAP_STACK=y support to the core kernel and enable it on
x86 - preceded by an array of changes. v4.8 saw preparatory changes
in this area already - this is the rest of the work. Includes the
thread stack caching performance optimization. (Andy Lutomirski)
- switch_to() cleanups and all around enhancements. (Brian Gerst)
- A large number of dumpstack infrastructure enhancements and an
unwinder abstraction. The secret long term plan is safe(r) live
patching plus maybe another attempt at debuginfo based unwinding -
but all these current bits are standalone enhancements in a frame
pointer based debug environment as well. (Josh Poimboeuf)
- More __ro_after_init and const annotations. (Kees Cook)
- Enable KASLR for the vmemmap memory region. (Thomas Garnier)"
[ The virtually mapped stack changes are pretty fundamental, and not
x86-specific per se, even if they are only used on x86 right now. ]
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
x86/asm: Get rid of __read_cr4_safe()
thread_info: Use unsigned long for flags
x86/alternatives: Add stack frame dependency to alternative_call_2()
x86/dumpstack: Fix show_stack() task pointer regression
x86/dumpstack: Remove dump_trace() and related callbacks
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder
oprofile/x86: Convert x86_backtrace() to use the new unwinder
x86/stacktrace: Convert save_stack_trace_*() to use the new unwinder
perf/x86: Convert perf_callchain_kernel() to use the new unwinder
x86/unwind: Add new unwind interface and implementations
x86/dumpstack: Remove NULL task pointer convention
fork: Optimize task creation by caching two thread stacks per CPU if CONFIG_VMAP_STACK=y
sched/core: Free the stack early if CONFIG_THREAD_INFO_IN_TASK
lib/syscall: Pin the task stack in collect_syscall()
x86/process: Pin the target stack in get_wchan()
x86/dumpstack: Pin the target stack when dumping it
kthread: Pin the stack via try_get_task_stack()/put_task_stack() in to_live_kthread() function
sched/core: Add try_get_task_stack() and put_task_stack()
x86/entry/64: Fix a minor comment rebase error
iommu/amd: Don't put completion-wait semaphore on stack
...
Pull x86 apic updates from Ingo Molnar:
"The main changes are:
- Persistent CPU/node numbering across CPU hotplug/unplug events.
This is a pretty involved series of changes that first fetches all
the information during bootup and then uses it for the various
hotplug/unplug methods. (Gu Zheng, Dou Liyang)
- IO-APIC hot-add/remove fixes and enhancements. (Rui Wang)
- ... various fixes, cleanups and enhancements"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/apic: Fix silent & fatal merge conflict in __generic_processor_info()
acpi: Fix broken error check in map_processor()
acpi: Validate processor id when mapping the processor
acpi: Provide mechanism to validate processors in the ACPI tables
x86/acpi: Set persistent cpuid <-> nodeid mapping when booting
x86/acpi: Enable MADT APIs to return disabled apicids
x86/acpi: Introduce persistent storage for cpuid <-> apicid mapping
x86/acpi: Enable acpi to register all possible cpus at boot time
x86/numa: Online memory-less nodes at boot time
x86/apic: Get rid of apic_version[] array
x86/apic: Order irq_enter/exit() calls correctly vs. ack_APIC_irq()
x86/ioapic: Ignore root bridges without a companion ACPI device
x86/apic: Update comment about disabling processor focus
x86/smpboot: Check APIC ID before setting up default routing
x86/ioapic: Fix IOAPIC failing to request resource
x86/ioapic: Fix lost IOAPIC resource after hot-removal and hotadd
x86/ioapic: Fix setup_res() failing to get resource
x86/ioapic: Support hot-removal of IOAPICs present during boot
x86/ioapic: Change prototype of acpi_ioapic_add()
x86/apic, ACPI: Fix incorrect assignment when handling apic/x2apic entries
...
Pull RAS updates from Ingo Molnar:
"The main changes were:
- Lots of enhancements for AMD SMCA (Scalable MCA
features/extensions) systems: extract, decode and print more
hardware error information and add matching support on the
injection/testing side as well. (Yazn Ghannam)
- Various MCE handling improvements on modern Intel Xeons. (Tony
Luck)
- Plus misc fixes and enhancements"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/RAS/mce_amd_inj: Remove debugfs dir recursively on exit
x86/RAS/mce_amd_inj: Fix signed wrap around when decrementing index 'i'
x86/RAS/mce_amd_inj: Fix some W= warnings
x86/MCE/AMD, EDAC: Handle reserved bank 4 on Fam17h properly
x86/mce/AMD: Extract the error address on SMCA systems
x86/mce, EDAC/mce_amd: Print MCA_SYND and MCA_IPID during MCE on SMCA systems
x86/mce/AMD: Save MCA_IPID in MCE struct on SMCA systems
x86/mce/AMD: Ensure the deferred error interrupt is of type APIC on SMCA systems
x86/mce/AMD: Update sysfs bank names for SMCA systems
x86/mce/AMD, EDAC/mce_amd: Define and use tables for known SMCA IP types
EDAC/mce_amd: Use SMCA prefix for error descriptions arrays
EDAC/mce_amd: Add missing SMCA error descriptions
x86/mce/AMD: Read MSRs on the CPU allocating the threshold blocks
x86/RAS: Add syndrome support to mce_amd_inj
EDAC/mce_amd: Print syndrome register value on SMCA systems
x86/mce: Add support for new MCA_SYND register
x86/mce/AMD: Use msr_ops.misc() in allocate_threshold_blocks()
x86/mce: Drop X86_FEATURE_MCE_RECOVERY and the related model string test
x86/mce: Improve memcpy_mcsafe()
x86/mce: Add PCI quirks to identify Xeons with machine check recovery
...
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- rwsem micro-optimizations (Davidlohr Bueso)
- Improve the implementation and optimize the performance of
percpu-rwsems. (Peter Zijlstra.)
- Convert all lglock users to better facilities such as percpu-rwsems
or percpu-spinlocks and remove lglocks. (Peter Zijlstra)
- Remove the ticket (spin)lock implementation. (Peter Zijlstra)
- Korean translation of memory-barriers.txt and related fixes to the
English document. (SeongJae Park)
- misc fixes and cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/cmpxchg, locking/atomics: Remove superfluous definitions
x86, locking/spinlocks: Remove ticket (spin)lock implementation
locking/lglock: Remove lglock implementation
stop_machine: Remove stop_cpus_lock and lg_double_lock/unlock()
fs/locks: Use percpu_down_read_preempt_disable()
locking/percpu-rwsem: Add down_read_preempt_disable()
fs/locks: Replace lg_local with a per-cpu spinlock
fs/locks: Replace lg_global with a percpu-rwsem
locking/percpu-rwsem: Add DEFINE_STATIC_PERCPU_RWSEMand percpu_rwsem_assert_held()
locking/pv-qspinlock: Use cmpxchg_release() in __pv_queued_spin_unlock()
locking/rwsem, x86: Drop a bogus cc clobber
futex: Add some more function commentry
locking/hung_task: Show all locks
locking/rwsem: Scan the wait_list for readers only once
locking/rwsem: Remove a few useless comments
locking/rwsem: Return void in __rwsem_mark_wake()
locking, rcu, cgroup: Avoid synchronize_sched() in __cgroup_procs_write()
locking/Documentation: Add Korean translation
locking/Documentation: Fix a typo of example result
locking/Documentation: Fix wrong section reference
...
Pull EFI updates from Ingo Molnar:
"Main changes in this cycle were:
- Refactor the EFI memory map code into architecture neutral files
and allow drivers to permanently reserve EFI boot services regions
on x86, as well as ARM/arm64. (Matt Fleming)
- Add ARM support for the EFI ESRT driver. (Ard Biesheuvel)
- Make the EFI runtime services and efivar API interruptible by
swapping spinlocks for semaphores. (Sylvain Chouleur)
- Provide the EFI identity mapping for kexec which allows kexec to
work on SGI/UV platforms with requiring the "noefi" kernel command
line parameter. (Alex Thorlton)
- Add debugfs node to dump EFI page tables on arm64. (Ard Biesheuvel)
- Merge the EFI test driver being carried out of tree until now in
the FWTS project. (Ivan Hu)
- Expand the list of flags for classifying EFI regions as "RAM" on
arm64 so we align with the UEFI spec. (Ard Biesheuvel)
- Optimise out the EFI mixed mode if it's unsupported (CONFIG_X86_32)
or disabled (CONFIG_EFI_MIXED=n) and switch the early EFI boot
services function table for direct calls, alleviating us from
having to maintain the custom function table. (Lukas Wunner)
- Miscellaneous cleanups and fixes"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
x86/efi: Round EFI memmap reservations to EFI_PAGE_SIZE
x86/efi: Allow invocation of arbitrary boot services
x86/efi: Optimize away setup_gop32/64 if unused
x86/efi: Use kmalloc_array() in efi_call_phys_prolog()
efi/arm64: Treat regions with WT/WC set but WB cleared as memory
efi: Add efi_test driver for exporting UEFI runtime service interfaces
x86/efi: Defer efi_esrt_init until after memblock_x86_fill
efi/arm64: Add debugfs node to dump UEFI runtime page tables
x86/efi: Remove unused find_bits() function
fs/efivarfs: Fix double kfree() in error path
x86/efi: Map in physical addresses in efi_map_region_fixed
lib/ucs2_string: Speed up ucs2_utf8size()
firmware-gsmi: Delete an unnecessary check before the function call "dma_pool_destroy"
x86/efi: Initialize status to ensure garbage is not returned on small size
efi: Replace runtime services spinlock with semaphore
efi: Don't use spinlocks for efi vars
efi: Use a file local lock for efivars
efi/arm*: esrt: Add missing call to efi_esrt_init()
efi/esrt: Use memremap not ioremap to access ESRT table in memory
x86/efi-bgrt: Use efi_mem_reserve() to avoid copying image data
...
Pull core SMP updates from Ingo Molnar:
"Two main change is generic vCPU pinning and physical CPU SMP-call
support, for Xen to be able to perform certain calls on specific
physical CPUs - by Juergen Gross"
* 'core-smp-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Allocate smp_call_on_cpu() workqueue on stack too
hwmon: Use smp_call_on_cpu() for dell-smm i8k
dcdbas: Make use of smp_call_on_cpu()
xen: Add xen_pin_vcpu() to support calling functions on a dedicated pCPU
smp: Add function to execute a function synchronously on a CPU
virt, sched: Add generic vCPU pinning support
xen: Sync xen header
Ever since commit 254d1a3f02 ("xen/pv-on-hvm kexec: shutdown watches
from old kernel") using the INTx interrupt from Xen PCI platform
device for event channel notification would just lockup the guest
during bootup. postcore_initcall now calls xs_reset_watches which
will eventually try to read a value from XenStore and will get stuck
on read_reply at XenBus forever since the platform driver is not
probed yet and its INTx interrupt handler is not registered yet. That
means that the guest can not be notified at this moment of any pending
event channels and none of the per-event handlers will ever be invoked
(including the XenStore one) and the reply will never be picked up by
the kernel.
The exact stack where things get stuck during xenbus_init:
-xenbus_init
-xs_init
-xs_reset_watches
-xenbus_scanf
-xenbus_read
-xs_single
-xs_single
-xs_talkv
Vector callbacks have always been the favourite event notification
mechanism since their introduction in commit 38e20b07ef ("x86/xen:
event channels delivery on HVM.") and the vector callback feature has
always been advertised for quite some time by Xen that's why INTx was
broken for several years now without impacting anyone.
Luckily this also means that event channel notification through INTx
is basically dead-code which can be safely removed without impacting
anybody since it has been effectively disabled for more than 4 years
with nobody complaining about it (at least as far as I'm aware of).
This commit removes event channel notification through Xen PCI
platform device.
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Julien Grall <julien.grall@citrix.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Ross Lagerwall <ross.lagerwall@citrix.com>
Cc: xen-devel@lists.xenproject.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: Anthony Liguori <aliguori@amazon.com>
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
We use __read_cr4() vs __read_cr4_safe() inconsistently. On
CR4-less CPUs, all CR4 bits are effectively clear, so we can make
the code simpler and more robust by making __read_cr4() always fix
up faults on 32-bit kernels.
This may fix some bugs on old 486-like CPUs, but I don't have any
easy way to test that.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: david@saggiorato.net
Link: http://lkml.kernel.org/r/ea647033d357d9ce2ad2bbde5a631045f5052fb6.1475178370.git.luto@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
cmpxchg contained definitions for unused (x)add_* operations, dating back
to the original ticket spinlock implementation. Nowadays these are
unused so remove them.
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hpa@zytor.com
Link: http://lkml.kernel.org/r/1474913478-17757-1-git-send-email-n.borisov.lkml@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
drivers/platform/x86/dell-smo8800.c is touched due to the following obscenity:
drivers/platform/x86/dell-smo8800.c ->
linux/interrupt.h ->
linux/hardirq.h ->
asm/hardirq.h ->
linux/irq.h ->
asm/hw_irq.h ->
asm/sections.h ->
asm/uaccess.h
is the only chain of includes pulling asm/uaccess.h there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It was introduced in "arch, x86: pmem api for ensuring durability
of persistent memory updates" in July 2015, along with the code
that really used that stuff. Three weeks later all that code
got moved to asm/pmem.h by "pmem, x86: move x86 PMEM API to new
pmem.h header"; include, however, was left behind.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Bring in the upstream modifications so we can fixup the silent merge
conflict which is introduced by this merge.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Linus reported the following objtool warning:
kernel/signal.o: warning: objtool: .altinstr_replacement+0x54: call without frame pointer save/setup
The warning is valid. It's caused by the fact that gcc placed the call
instruction in alternative_call_2()'s inline asm before the frame
pointer setup, which breaks frame pointer convention and can result in a
bad stack trace.
Force a stack frame to be created before the call instruction by listing
the stack pointer as an output operand in the inline asm statement.
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160923214939.j5o7c67nhepzmh3t@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add set_dev_domain_options() to set PCI domain-specific options as devices
are added. The first usage is to request exclusive userspace control of
PCIe hotplug indicators in VMD domains.
Devices in a VMD domain use PCIe hotplug Attention and Power Indicators in
a non-standard way; tell pciehp to ignore the indicators so userspace can
control them via the sysfs "attention" file.
To determine whether a bus is within a VMD domain, add a bool to the
pci_sysdata structure that the VMD driver sets during initialization.
[bhelgaas: changelog]
Requested-by: Kapil Karkra <kapil.karkra@intel.com>
Tested-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add the UV4-specific function definitions and define an operations struct
to implement them in the BAU driver.
Many BAU MMRs, although functionally the same, have new addresses on UV4
due to hardware changes. Each MMR requires new read/write functions, but
their implementation in the driver does not change. Thus, it is enough to
enumerate them in the operations struct for the changes to take effect.
Signed-off-by: Andrew Banman <abanman@sgi.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mike Travis <travis@sgi.com>
Acked-by: Dimitri Sivanich <sivanich@sgi.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: akpm@linux-foundation.org
Cc: rja@sgi.com
Link: http://lkml.kernel.org/r/1474474161-265604-11-git-send-email-abanman@sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Many BAU functions have different implementations depending on the UV
version. Rather than switching on the uvhub_version throughout the driver,
we can define a set of operations for each version. This is especially
beneficial for UV4, which will require many new MMR read/write functions.
Currently, the set of abstracted functions are the same for UV1, UV2, and
UV3. The functions were chosen because each one will have a different
implementation for UV4. Other functions will be added as needed to handle
new implementations or to cleanup the existing differences between UV1,
UV2, and UV3, i.e. read_status and wait_completion.
Signed-off-by: Andrew Banman <abanman@sgi.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mike Travis <travis@sgi.com>
Acked-by: Dimitri Sivanich <sivanich@sgi.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: akpm@linux-foundation.org
Cc: rja@sgi.com
Link: http://lkml.kernel.org/r/1474474161-265604-6-git-send-email-abanman@sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The BAU driver should use the functions provided by uv_hub.h rather than
its own implementations. uv_physnodeaddr converts vaddrs to paddrs for
BAU MMR fields, but this is done better by uv_gpa_to_offset.
Signed-off-by: Andrew Banman <abanman@sgi.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mike Travis <travis@sgi.com>
Acked-by: Dimitri Sivanich <sivanich@sgi.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: akpm@linux-foundation.org
Cc: rja@sgi.com
Link: http://lkml.kernel.org/r/1474474161-265604-5-git-send-email-abanman@sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The payload queue first MMR requires the physical memory address and hub
GNODE of where the payload queue resides in memory, but the associated
variables are named as if the PNODE were used. Rename gnode-related
variables and clarify the definitions of the payload queue head, last, and
tail pointers.
Signed-off-by: Andrew Banman <abanman@sgi.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mike Travis <travis@sgi.com>
Acked-by: Dimitri Sivanich <sivanich@sgi.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: akpm@linux-foundation.org
Cc: rja@sgi.com
Link: http://lkml.kernel.org/r/1474474161-265604-4-git-send-email-abanman@sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The whole patch-set aims at making cpuid <-> nodeid mapping persistent. So that,
when node online/offline happens, cache based on cpuid <-> nodeid mapping such as
wq_numa_possible_cpumask will not cause any problem.
It contains 4 steps:
1. Enable apic registeration flow to handle both enabled and disabled cpus.
2. Introduce a new array storing all possible cpuid <-> apicid mapping.
3. Enable _MAT and MADT relative apis to return non-present or disabled cpus' apicid.
4. Establish all possible cpuid <-> nodeid mapping.
This patch finishes step 2.
In this patch, we introduce a new static array named cpuid_to_apicid[],
which is large enough to store info for all possible cpus.
And then, we modify the cpuid calculation. In generic_processor_info(),
it simply finds the next unused cpuid. And it is also why the cpuid <-> nodeid
mapping changes with node hotplug.
After this patch, we find the next unused cpuid, map it to an apicid,
and store the mapping in cpuid_to_apicid[], so that cpuid <-> apicid
mapping will be persistent.
And finally we will use this array to make cpuid <-> nodeid persistent.
cpuid <-> apicid mapping is established at local apic registeration time.
But non-present or disabled cpus are ignored.
In this patch, we establish all possible cpuid <-> apicid mapping when
registering local apic.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: mika.j.penttila@gmail.com
Cc: len.brown@intel.com
Cc: rafael@kernel.org
Cc: rjw@rjwysocki.net
Cc: yasu.isimatu@gmail.com
Cc: linux-mm@kvack.org
Cc: linux-acpi@vger.kernel.org
Cc: isimatu.yasuaki@jp.fujitsu.com
Cc: gongzhaogang@inspur.com
Cc: tj@kernel.org
Cc: izumi.taku@jp.fujitsu.com
Cc: cl@linux.com
Cc: chen.tang@easystack.cn
Cc: akpm@linux-foundation.org
Cc: kamezawa.hiroyu@jp.fujitsu.com
Cc: lenb@kernel.org
Link: http://lkml.kernel.org/r/1472114120-3281-4-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch turns e820 and e820_saved into pointers to e820 tables,
of the same size as before.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20160917213927.1787-2-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>