Commit Graph

520850 Commits

Author SHA1 Message Date
Thierry Reding
3c1dae0a07 drm/tegra: dpaux: Fix transfers larger than 4 bytes
The DPAUX read/write FIFO registers aren't sequential in the register
space, causing transfers larger than 4 bytes to cause accesses to non-
existing FIFO registers.

Fixes: 6b6b604215 ("drm/tegra: Add eDP support")
Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-06-12 16:22:46 +02:00
Dave Airlie
b9a1077a4e Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm-next
Main pull req for 4.2.. I think there will be a secondary pull-req..
I'd like to land the hdcp support patches, since all the review
comments have been long since addressed, and they have been ready to
merge for a couple release cycles now other than the scm dependency
(which should be coming in through arm-soc tree for 4.2). So I am not
including them in this initial pull req to avoid merge ordering
issues.

Main highlights:

1) adreno a306 support (for apq8x16 and upcoming dragonboard 410c)
2) various dsi bits
3) various 64bit fixes (mostly warnings)
4) NV12MT support, pulled in via msm-next rather than drm-misc since
dependency on on regenerated envytools headers (but lgtm'd-by danvet)
5) random fixes and cleanups

* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (36 commits)
  drm/msm: restart queued submits after hang
  drm/msm: fix timeout calculation
  drm/msm/hdmi: Use pinctrl in HDMI driver
  drm/msm/hdmi: Point to the right struct device
  drm/msm/mdp: Add support for more 32-bit RGB formats
  drm/msm: use __s32, __s64, __u32 and __u64 from linux/types.h for uabi
  drm/msm/atomic: Clean up planes in the error paths of .atomic_commit()
  drm/msm/mdp5: Always generate active-high sync signals for DSI
  drm/msm: dsi: fix compile errors when CONFIG_GPIOLIB=n
  drm/msm: use devm_gpiod_get_optional for optional reset gpio
  drm/msm/dsi: Separate PHY to another platform device
  drm/msm/dsi: Enable PLL driver in MSM DSI
  drm/msm/dsi: Add DSI PLL clock driver support
  drm/msm: use IS_ERR() to check regulator_get() return
  drm/msm: use IS_ERR() to check msm_ioremap() return
  drm/msm/mdp5: Wait for PP_DONE irq for command mode CRTC atomic commit
  drm/msm: Use customized function to wait for atomic commit done
  dt-bindings: Add MSM eDP controller documentation
  dt-bindings: Add MSM DSI controller documentation
  drm/msm: drop redundant debug output
  ...
2015-06-12 10:17:55 +10:00
Dave Airlie
5c70c46478 Merge tag 'drm-intel-next-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel into drm-next
firmware name fix

* tag 'drm-intel-next-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel:
  drm/i915/skl: Fix DMC API version in firmware file name
2015-06-12 10:16:36 +10:00
Dave Airlie
933ea180a4 Merge tag 'drm-amdkfd-next-fixes-2015-06-10' of git://people.freedesktop.org/~gabbayo/linux into drm-next
- Make the reset wavefronts action be per process per device instead of
  per process, because one device can be stuck but the other one won't be

- Add some missing properties to the CZ device_info structure

- Rename symbols to not have CONFIG_ prefix

- Some more cleanups and debug prints

* tag 'drm-amdkfd-next-fixes-2015-06-10' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: remove not used defines from cik_regs.h
  drm/amdkfd: Add missing properties to CZ device info
  drm/amdkfd: make reset wavefronts per process per device
  drm/amdkfd: add debug print to kfd_events.c
  drm/amdkfd: avoid CONFIG_ prefix for non-Kconfig symbols
2015-06-12 10:14:20 +10:00
Dave Airlie
7207d559e4 Merge branch '2015-06-08-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel into drm-next
Mainly it is fixing timing on HDMI to be compliant with CEA-861E spec.

* '2015-06-08-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel:
  drm/sti: vtg fix CEA-861E video format timing error
  drm/sti: hdmi fix CEA-861E video format timing error
  drm/sti: VTG interrupt names are badly displayed
  drm/sti: missing first pixel column on HDMI display
  drm/sti: correctly test devm_ioremap() return
2015-06-12 10:14:00 +10:00
Rob Clark
1a370be9ac drm/msm: restart queued submits after hang
Track the list of in-flight submits.  If the gpu hangs, retire up to an
including the offending submit, and then re-submit the remainder.  This
way, for concurrently running piglit tests (for example), one failing
test doesn't cause unrelated tests to fail simply because it's submit
was queued up after one that triggered a hang.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:06 -04:00
Rob Clark
56c2da8338 drm/msm: fix timeout calculation
The 'timeout' value comes from userspace (CLOCK_MONOTONIC), but
converting this directly to jiffies doesn't take into account the
initial jiffies count at boot, which may differ from the base time
of CLOCK_MONOTONIC.

TODO: add ktime_delta_jiffies() when rebasing on 4.1 and use that
instead of ktime_sub/ktime_to_timespec/timespec_to_jiffies combo (as
suggested by Arnd)

v2: switch over from 'struct timespec' to ktime_t throughout, since
'struct timespec' will be deprecated (as suggested by Arnd)
v3: minor cosmetic tweaks

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:06 -04:00
Stephane Viau
865807d0a9 drm/msm/hdmi: Use pinctrl in HDMI driver
Some targets (eg: msm8994) use the pinctrl framework to configure
interface pins. This change adds support for initialization and
pinctrl active/sleep state control for the HDMI driver.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:06 -04:00
Stephane Viau
5e4eb82fc2 drm/msm/hdmi: Point to the right struct device
DRM device's dev (hdmi->dev->dev) points to the mdss_mdp device
handle. Instead, we should get a reference to the mdss_hdmi
handle.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:06 -04:00
Stephane Viau
fbd4ae8a4e drm/msm/mdp: Add support for more 32-bit RGB formats
That will complete the lists of Alpha + RGB formats.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:05 -04:00
Mikko Rapeli
7f8fc88613 drm/msm: use __s32, __s64, __u32 and __u64 from linux/types.h for uabi
Fixes userspace compilation errors like:

error: unknown type name ‘uint32_t’

Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:05 -04:00
Laurent Pinchart
f65c18c050 drm/msm/atomic: Clean up planes in the error paths of .atomic_commit()
When the .atomic_commit() handler fails, clean up planes previoulsy
prepared by drm_atomic_helper_prepare_planes() with a call to
drm_atomic_helper_cleanup_planes().

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:05 -04:00
Hai Li
1efb92a306 drm/msm/mdp5: Always generate active-high sync signals for DSI
DSI video mode engine can only take active-high sync signals. This
change prevents MDP5 sending active-low sync signals to DSI in any
case.

Signed-off-by: Hai Li <hali@codeaurora.org>
Tested-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:05 -04:00
Brian Norris
964a0754e4 drm/msm: dsi: fix compile errors when CONFIG_GPIOLIB=n
I'm not sure where, exactly, but somewhere in here we must be relying on
an implicit include.

drivers/gpu/drm/msm/dsi/dsi_host.c: In function ‘dsi_host_init_panel_gpios’:
drivers/gpu/drm/msm/dsi/dsi_host.c:1356:2: error: implicit declaration of function ‘devm_gpiod_get’ [-Werror=implicit-function-declaration]
  msm_host->disp_en_gpio = devm_gpiod_get(panel_device,
  ^
drivers/gpu/drm/msm/dsi/dsi_host.c:1356:25: warning: assignment makes pointer from integer without a cast [enabled by default]
  msm_host->disp_en_gpio = devm_gpiod_get(panel_device,
                         ^
drivers/gpu/drm/msm/dsi/dsi_host.c:1364:3: error: implicit declaration of function ‘gpiod_direction_output’ [-Werror=implicit-function-declaration]
   ret = gpiod_direction_output(msm_host->disp_en_gpio, 0);
   ^
drivers/gpu/drm/msm/dsi/dsi_host.c:1371:20: warning: assignment makes pointer from integer without a cast [enabled by default]
  msm_host->te_gpio = devm_gpiod_get(panel_device, "disp-te");
                    ^
drivers/gpu/drm/msm/dsi/dsi_host.c:1378:3: error: implicit declaration of function ‘gpiod_direction_input’ [-Werror=implicit-function-declaration]
   ret = gpiod_direction_input(msm_host->te_gpio);
   ^
drivers/gpu/drm/msm/dsi/dsi_host.c: In function ‘msm_dsi_host_power_on’:
drivers/gpu/drm/msm/dsi/dsi_host.c:1918:3: error: implicit declaration of function ‘gpiod_set_value’ [-Werror=implicit-function-declaration]
   gpiod_set_value(msm_host->disp_en_gpio, 1);
   ^

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Hai Li <hali@codeaurora.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:05 -04:00
Uwe Kleine-König
9590e69db9 drm/msm: use devm_gpiod_get_optional for optional reset gpio
Since 39b2bbe3d7 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for output.

Also there is a variant to find optional gpios that returns NULL if
there is no gpio instead of -ENOENT.

Make use of both features to simplify the driver.

This makes error checking more strict because errors like -ENOSYS ("no
gpio support compiled in") or -EPROBE_DEFER ("gpio not ready yet") are
handled correctly now.

Furthermore this is one caller less that stops us making the flags
argument to gpiod_get*() mandatory.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:05 -04:00
Hai Li
ec31abf668 drm/msm/dsi: Separate PHY to another platform device
There are different types of PHY from one chipset to another, while
the DSI host controller is relatively consistent across platforms.
Also, the PLL inside PHY is providing the source of DSI byte and
pixel clocks, which are used by DSI host controller. Separated devices
for clock provider and clock consumer make DSI driver better fit into
common clock framework.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:05 -04:00
Hai Li
9d32c4989c drm/msm/dsi: Enable PLL driver in MSM DSI
This change activates PLL driver for DSI to work with
common clock framework.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:04 -04:00
Hai Li
825637b9c0 drm/msm/dsi: Add DSI PLL clock driver support
DSI byte clock and pixel clocks are sourced from DSI PLL.
This change adds the DSI PLL source clock driver under
common clock framework.

This change handles DSI 28nm PLL only.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Wentao Xu <wentaox@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:04 -04:00
Fabian Frederick
bdc80de2a6 drm/msm: use IS_ERR() to check regulator_get() return
regulator_get() never returns NULL. There's no need for IS_ERR_OR_NULL()

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:04 -04:00
Fabian Frederick
73dbf69638 drm/msm: use IS_ERR() to check msm_ioremap() return
msm_ioremap() never returns NULL. There's no need for IS_ERR_OR_NULL()

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:04 -04:00
Hai Li
68cdbed907 drm/msm/mdp5: Wait for PP_DONE irq for command mode CRTC atomic commit
CRTCs in DSI command mode data path should wait for pingpong done,
instead of vblank, to finish atomic commit.

This change is to enable PP_DONE irq on command mode CRTCs and wait for
this irq happens before atomic commit completion.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:04 -04:00
Hai Li
0a5c9aad11 drm/msm: Use customized function to wait for atomic commit done
MDP FLUSH registers could indicate if the previous flush updates
has taken effect at vsync boundary. Making use of this H/W feature
can catch the vsync that happened between CRTC atomic_flush and
*_wait_for_vblanks, to avoid unnecessary wait.

This change allows kms CRTCs to use their own *_wait_for_commit_done
functions to wait for FLUSH register cleared at vsync, before commit
completion.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:04 -04:00
Hai Li
7eed919a35 dt-bindings: Add MSM eDP controller documentation
Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:03 -04:00
Hai Li
c760558c2d dt-bindings: Add MSM DSI controller documentation
Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:03 -04:00
Nicholas Mc Guire
0c076bffd2 drm/msm: drop redundant debug output
wait_for_completion_timeout returns 0 in case of timeout and never
return < 0 so there is no additional information in printing the
value of time_left here as it will always be 0, thus it can be dropped.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:03 -04:00
Nicholas Mc Guire
c6d0baf1fd drm/msm: wait_for_completion_timeout return is never negative
wait_for_completion_timeout returns >= 0 but never
negative  - so the error check should be against equality
to 0 not <= 0.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:03 -04:00
Nicholas Mc Guire
a51d01f067 drm/msm: match wait_for_completion_timeout return type
return type of wait_for_completion_timeout is unsigned long not int, this
patch assigns the return value of wait_for_completion_timeout to an
appropriately typed and named variable.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:03 -04:00
Archit Taneja
65c5e5426d drm/msm: dsi: Provide option to force continuous HS clock
Some DSI peripherals rely on the HS clock on DSI clock lane as their clock
source. If the clock lane transitions between HS and LP states, it
can disrupt the functioning of such peripherals.

The mipi dsi mode flag MIPI_DSI_CLOCK_NON_CONTINUOUS already exists for
such peripheral drivers. Use it to configure the bit CLKLN_HS_FORCE_REQUEST
in DSI_LANE_CTRL.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:03 -04:00
jilai wang
f28730c84f drm/msm: Call drm_prime_gem_destroy to clean up imported GEM object
If the GEM object is imported, drm_prime_gem_destroy needs to be
called to clean up dma buffer related information.

Signed-off-by: Jilai Wang <jilaiw@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:02 -04:00
Rob Clark
07549dfbd9 drm/msm/edp: fix build warning - missing prototype
Fix build warning when building edp/edp_aux.o due to missing
prototype for edp_aux_transfer.

This function is only used in edp_aux.c so just make it static.

Reported-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:02 -04:00
Nicholas Mc Guire
a7c07690f2 drm/msm: drop redundant output in debug message
wait_for_completion_timeout returns 0 in case of timeout so printing the
return value here will always yield 0 and is therefor redundant - dropped.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:02 -04:00
Nicholas Mc Guire
84c3b87b8b drm/msm: fix HZ dependency of timeout
The timeout is passed as a constant which makes it HZ dependent because
jiffies are expected so it should be converted to jiffies. The actual
value is not clear from the code - my best guess is that this should be
300 milliseconds given that other timeouts are in milliseconds based on
looking at other drm drivers (e.g. exynos_drm_dsi.c:356 300ms,
tegra/dpaux.c:188 250ms) - this needs to be confirmed by someone who
knows the details of the driver.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:02 -04:00
Nicholas Mc Guire
9f68ef90aa drm/msm: fixup wait_for_completion_timeout handling
wait_for_completion_timeout return >= 0 but never negative so the check
logic looks inconsistent. Further the return value of
wait_for_completion_timeout was being passed up the call chain but the
x call sites as drm_dp_i2c_do_msg()/drm_dp_dpcd_access() check for < 0
thus timeout was being treated as success case.

<snip> drivers/gpu/drm/drm_dp_helper.c:drm_dp_i2c_do_msg()
                mutex_lock(&aux->hw_mutex);
                ret = aux->transfer(aux, msg);
                mutex_unlock(&aux->hw_mutex);
                if (ret < 0) {
<snip>
logic in edp_aux_transfer() seems incorrect as it could return 0 (timeout)
but checks of <= 0 to indicate error so the return probably should be
-ETIMEDOUT in case wait_for_completion_timeout returns 0 (timeout
occurred).

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:02 -04:00
Rob Clark
e5989ee134 drm/msm/mdp5: fix for crash in disable path
Seems like disable can race with complete_flip() in process of disabling
a crtc, leading to:

[   49.065364] Call trace:
[   49.071441] [<ffffffc00041d5a0>] mdp5_ctl_blend+0x20/0x1c0
[   49.073788] [<ffffffc00041ebcc>] mdp5_crtc_disable+0x3c/0xa8
[   49.079348] [<ffffffc0003e7854>] disable_outputs.isra.4+0x11c/0x220
[   49.085164] [<ffffffc0003e7afc>] drm_atomic_helper_commit_modeset_disables+0x14/0x38
[   49.091155] [<ffffffc000425c80>] complete_commit+0x40/0xb8
[   49.099136] [<ffffffc0004260ac>] msm_atomic_commit+0x364/0x398
[   49.104430] [<ffffffc00040a614>] drm_atomic_commit+0x3c/0x70
[   49.110249] [<ffffffc0003e67b8>] drm_atomic_helper_set_config+0x1b0/0x3e0
[   49.116065] [<ffffffc0003f99bc>] drm_mode_set_config_internal+0x64/0xf8
[   49.122746] [<ffffffc0003fa624>] drm_framebuffer_remove+0xe4/0x128
[   49.129171] [<ffffffc0003feaf8>] drm_mode_rmfb+0xc0/0x100
[   49.135420] [<ffffffc0003efba8>] drm_ioctl+0x258/0x4d0
[   49.140889] [<ffffffc0001b0388>] do_vfs_ioctl+0x338/0x5d0
[   49.145921] [<ffffffc0001b06a8>] SyS_ioctl+0x88/0xa0

It makes no sense to free the ctl without disabling all stages, so lets
just move them together to avoid the crash.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:02 -04:00
Rob Clark
d735fdc35b drm/msm: workaround for missing irq on a306/8x16
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:01 -04:00
Rob Clark
de558cd2ae drm/msm: adreno a306 support
As found in apq8016 (used in DragonBoard 410c) and msm8916.

Note that numerically a306 is actually 307 (since a305c already claimed
306).  Nice and confusing.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:01 -04:00
Rob Clark
6490ad4740 drm/msm: clarify downstream bus scaling
A few spots in the driver have support for downstream android
CONFIG_MSM_BUS_SCALING.  This is mainly to simplify backporting the
driver for various devices which do not have sufficient upstream
kernel support.  But the intentionally dead code seems to cause
some confusion.  Rename the #define to make this more clear.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:01 -04:00
Rob Clark
570655b09b drm/msm/mdp4: Support NV12MT format in mdp4
Using fb modifier flag, support NV12MT format in MDP4.

v2:
- rework the modifier's description [Daniel Vetter's comment]
- drop .set_mode_config() callback [Rob Clark's comment]
v3:
- change VENDOR's name and restrict usage to NV12 [pointed by Daniel]

Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:01 -04:00
Rob Clark
af6cb4c1a4 drm/msm: update generated headers
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:01 -04:00
Rob Clark
a5436e1d24 drm/msm: add missing DRIVER_ATOMIC flag
Somehow this got lost when msm atomic support was first merged.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:00 -04:00
Rob Clark
2671618551 drm/msm/adreno: dump scratch regs and other info on hang
Dump a bit more info when the GPU hangs, without having hang_debug
enabled (which dumps a *lot* of registers).  Also dump the scratch
registers, as they are useful for determining where in the cmdstream
the GPU hung (and they seem always safe to read when GPU has hung).

Note that the freedreno gallium driver emits increasing counter values
to SCRATCH6 (to identify tile #) and SCRATCH7 (to identify draw #), so
these two in particular can be used to "triangulate" where in the
cmdstream the GPU hung.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-06-11 13:11:00 -04:00
Dan Carpenter
3f05eb4e3f drm/virtio: remove some dead code
The goto is correct, and we never reach the return statement so just
delete the dead code.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-11 13:16:35 +10:00
Dan Carpenter
2b7edcad69 drm/virtio: checking for NULL instead of IS_ERR
virtio_gpu_alloc_object() returns an error pointer, it never returns
NULL.

Fixes: dc5698e80c ('Add virtio gpu driver.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-06-11 13:16:29 +10:00
Dave Airlie
dc9be8e217 Merge branch 'drm-next-4.2-amdgpu' of git://people.freedesktop.org/~agd5f/linux into drm-next
More fixes for amdgpu for 4.2.  We've integrated Jerome's comments
about the interface among other things.  I'll be on vacation next week
so Christian will be handling any updates next week.

* 'drm-next-4.2-amdgpu' of git://people.freedesktop.org/~agd5f/linux: (23 commits)
  drm/amdgpu: fix a amdgpu_dpm=0 bug
  drm/amdgpu: don't enable/disable display twice on suspend/resume
  drm/amdgpu: fix UVD/VCE VM emulation
  drm/amdgpu: enable vce powergating
  drm/amdgpu/iceland: don't call smu_init on resume
  drm/amdgpu/tonga: don't call smu_init on resume
  drm/amdgpu/cz: don't call smu_init on resume
  drm/amdgpu: update to latest gfx8 golden register settings
  drm/amdgpu: whitespace cleanup in gmc8 golden regs
  drm/admgpu: move XDMA golden registers to dce code
  drm/amdgpu: fix the build on big endian
  drm/amdgpu: cleanup UAPI comments
  drm/amdgpu: remove AMDGPU_CTX_OP_STATE_RUNNING
  drm/amdgpu: remove the VI hardware semaphore in ring sync
  drm/amdgpu: set the gfx config properly for all CZ variants (v2)
  drm/amdgpu: also print the pci revision when printing the pci ids
  drm/amdgpu: cleanup VA IOCTL
  drm/amdgpu: fix saddr handling in amdgpu_vm_bo_unmap
  drm/amdgpu: fix amdgpu_vm_bo_map
  drm/amdgpu: remove unused AMDGPU_IB_FLAG_GDS
  ...
2015-06-11 13:04:07 +10:00
Sonny Jiang
6d8db6ce23 drm/amdgpu: fix a amdgpu_dpm=0 bug
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-10 15:05:33 -04:00
Alex Deucher
633ed3df9a drm/amdgpu: don't enable/disable display twice on suspend/resume
We were doing it in the common code and in the IP specific code.
Remove the IP specific code.  The common code handles the
ordering properly.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-10 14:16:48 -04:00
Christian König
4802ce1177 drm/amdgpu: fix UVD/VCE VM emulation
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-10 14:16:48 -04:00
Sonny Jiang
b7a0776949 drm/amdgpu: enable vce powergating
Enable VCE dpm and powergating. VCE dpm dynamically scales the VCE clocks on
demand.

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
2015-06-10 11:54:16 -04:00
Alex Deucher
b97aab014c drm/amdgpu/iceland: don't call smu_init on resume
smu_init allocates buffers and initializes them.  It does not
touch the hw.  There is no need to do it again on resume.  It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.

Reviewed-by: Sonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-10 09:32:25 -04:00
Alex Deucher
aaf4ee3c02 drm/amdgpu/tonga: don't call smu_init on resume
smu_init allocates buffers and initializes them.  It does not
touch the hw.  There is no need to do it again on resume.  It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.

Reviewed-by: Sonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-10 09:32:19 -04:00