Break out the hard coded window size code to allow dynamic setup. The
window size is still left at 1GiB but with this patch changing window size
is easy for testing.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Convert the code to allow per-device probe() like other device drivers.
This also delays driver registration due to change from subsys_initcall()
to regular module_platform_driver().
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
The bridge logic at slot 0 only supports reads up to 0x40 and the rest of
the PCI configuration space for this slot is marked as reserved in the
manual.
Trying a read from offset 0x100 is producing an error from the bridge. With
error interrupts enabled, the following is printed:
pci-rcar-gen2 ee0d0000.pci: error irq: status 00000014
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Add option to enable interrupts to report any errors from the AHB-PCI
bridge to help find any issues with the bridge when in use.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
The current code does not check the return from platform_get_irq() so add
an error check and return if this call does fail.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
If runtime PM is enabled in the kernel config, the PCI clocks are not
forced on at start-up, and thus, are never enabled. Use
pm_runtime_get_sync() to enable the clocks.
While at it, use dev_info() instead of pr_info() since now we have the
device pointer available in the PCI setup callback.
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In case of error, the function devm_ioremap_resource() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
This adds internal PCI controller driver for R-Car Gen2 SoC. There are
three PCI controllers available with only a single EHCI/OHCI device
built-in on each PCI bus. This gives us three USB channels. Channel 0 is
shared with the USBHS device, while channel 2 is shared with the USBSS.
The PCI controllers do not support I/O port space mapping, and it is not
needed here.
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
