Commit Graph

9951 Commits

Author SHA1 Message Date
Linus Torvalds
ae50dfd616 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Ensure that mtu is at least IPV6_MIN_MTU in ipv6 VTI tunnel driver,
    from Steffen Klassert.

 2) Fix crashes when user tries to get_next_key on an LPM bpf map, from
    Alexei Starovoitov.

 3) Fix detection of VLAN fitlering feature for bnx2x VF devices, from
    Michal Schmidt.

 4) We can get a divide by zero when TCP socket are morphed into
    listening state, fix from Eric Dumazet.

 5) Fix socket refcounting bugs in skb_complete_wifi_ack() and
    skb_complete_tx_timestamp(). From Eric Dumazet.

 6) Use after free in dccp_feat_activate_values(), also from Eric
    Dumazet.

 7) Like bonding team needs to use ETH_MAX_MTU as netdev->max_mtu, from
    Jarod Wilson.

 8) Fix use after free in vrf_xmit(), from David Ahern.

 9) Don't do UDP Fragmentation Offload on IPComp ipsec packets, from
    Alexey Kodanev.

10) Properly check napi_complete_done() return value in order to decide
    whether to re-enable IRQs or not in amd-xgbe driver, from Thomas
    Lendacky.

11) Fix double free of hwmon device in marvell phy driver, from Andrew
    Lunn.

12) Don't crash on malformed netlink attributes in act_connmark, from
    Etienne Noss.

13) Don't remove routes with a higher metric in ipv6 ECMP route replace,
    from Sabrina Dubroca.

14) Don't write into a cloned SKB in ipv6 fragmentation handling, from
    Florian Westphal.

15) Fix routing redirect races in dccp and tcp, basically the ICMP
    handler can't modify the socket's cached route in it's locked by the
    user at this moment. From Jon Maxwell.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (108 commits)
  qed: Enable iSCSI Out-of-Order
  qed: Correct out-of-bound access in OOO history
  qed: Fix interrupt flags on Rx LL2
  qed: Free previous connections when releasing iSCSI
  qed: Fix mapping leak on LL2 rx flow
  qed: Prevent creation of too-big u32-chains
  qed: Align CIDs according to DORQ requirement
  mlxsw: reg: Fix SPVMLR max record count
  mlxsw: reg: Fix SPVM max record count
  net: Resend IGMP memberships upon peer notification.
  dccp: fix memory leak during tear-down of unsuccessful connection request
  tun: fix premature POLLOUT notification on tun devices
  dccp/tcp: fix routing redirect race
  ucc/hdlc: fix two little issue
  vxlan: fix ovs support
  net: use net->count to check whether a netns is alive or not
  bridge: drop netfilter fake rtable unconditionally
  ipv6: avoid write to a possibly cloned skb
  net: wimax/i2400m: fix NULL-deref at probe
  isdn/gigaset: fix NULL-deref at probe
  ...
2017-03-14 21:31:23 -07:00
Linus Torvalds
46552bf433 USB fixes for 4.11-rc2
Here is a number of different USB fixes for 4.11-rc2.  Seems like there
 were a lot of unresolved issues that people have been finding for this
 subsystem, and a bunch of good security auditing happening as well from
 Johan Hovold.  There's the usual batch of gadget driver fixes and xhci
 issues resolved as well.
 
 All of these have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWMOkLA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymiCACeIL3h4bNEc6+XLiB+sfmQx4wV2MUAnRMD1gB0
 GxkBXY1Iny94vhZC8x5r
 =dlkm
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here is a number of different USB fixes for 4.11-rc2.

  Seems like there were a lot of unresolved issues that people have been
  finding for this subsystem, and a bunch of good security auditing
  happening as well from Johan Hovold. There's the usual batch of gadget
  driver fixes and xhci issues resolved as well.

 All of these have been in linux-next with no reported issues"

* tag 'usb-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
  usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers
  usb: host: xhci-dbg: HCIVERSION should be a binary number
  usb: xhci: remove dummy extra_priv_size for size of xhci_hcd struct
  usb: xhci-mtk: check hcc_params after adding primary hcd
  USB: serial: digi_acceleport: fix OOB-event processing
  MAINTAINERS: usb251xb: remove reference inexistent file
  doc: dt-bindings: usb251xb: mark reg as required
  usb: usb251xb: dt: add unit suffix to oc-delay and power-on-time
  usb: usb251xb: remove max_{power,current}_{sp,bp} properties
  usb-storage: Add ignore-residue quirk for Initio INIC-3619
  USB: iowarrior: fix NULL-deref in write
  USB: iowarrior: fix NULL-deref at probe
  usb: phy: isp1301: Add OF device ID table
  usb: ohci-at91: Do not drop unhandled USB suspend control requests
  USB: serial: safe_serial: fix information leak in completion handler
  USB: serial: io_ti: fix information leak in completion handler
  USB: serial: omninet: drop open callback
  USB: serial: omninet: fix reference leaks at open
  USB: serial: io_ti: fix NULL-deref in interrupt callback
  usb: dwc3: gadget: make to increment req->remaining in all cases
  ...
2017-03-11 00:08:39 -08:00
Masahiro Yamada
505d3085d7 scripts/spelling.txt: add "overide" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:

  overide||override

While we are here, fix the doubled "address" in the touched line
Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt.

Also, fix the comment block style in the touched hunks in
drivers/media/dvb-frontends/drx39xyj/drx_driver.h.

Link: http://lkml.kernel.org/r/1481573103-11329-21-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09 17:01:09 -08:00
Richard Leitner
fa56fe4ca4 doc: dt-bindings: usb251xb: mark reg as required
Mark the reg property as required and furthermore fix some typos and
spellings in the documentation.

Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 10:34:16 +01:00
Richard Leitner
7f7d8ba3b2 usb: usb251xb: dt: add unit suffix to oc-delay and power-on-time
Rename oc-delay-* to oc-delay-us and make it expect a time value.
Furthermore add -ms suffix to power-on-time. There changes were
suggested by Rob Herring in https://lkml.org/lkml/2017/2/15/1283.

Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 10:34:16 +01:00
Richard Leitner
cfa47afe77 usb: usb251xb: remove max_{power,current}_{sp,bp} properties
Remove the max_{power,current}_{sp,bp} properties of the usb251xb driver
from devicetree. This is done to simplify the dt bindings as requested
by Rob Herring in https://lkml.org/lkml/2017/2/15/1283. If those
properties are ever needed by somebody they can be enabled again easily.

Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-09 10:34:15 +01:00
Christian Lamparter
a3a4a816b4 dt: emac: document device-tree based phy discovery and setup
This patch adds documentation for a new "phy-handle" property,
"fixed-link" and "mdio" sub-node. These allows the enumeration
of PHYs which are supported by the phy library under drivers/net/phy.

The EMAC ethernet controller in IBM and AMCC 4xx chips is
currently stuck with a few privately defined phy
implementations. It has no support for PHYs which
are supported by the generic phylib.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-07 12:15:06 -08:00
Linus Torvalds
a1a0db36d8 ARM: SoC: late DT updates for v4.11
These updates have been kept in a separate branch mostly because
 they rely on updates to the respective clk drivers to keep the
 shared header files in sync.
 
 This includes two branches for arm64 dt updates, both following up
 on earlier changes for the same platforms that are already merged:
 
 Samsung:
   - add USB3 support in Exynos7
   - minor PM related updates
 
 Amlogic:
   - new machines: WeTek Set-top-boxes
   - various devices added to DT
 
 There are also a couple of bugfixes that trickled in since the
 start of the merge window:
 
 - The moxart_defconfig was not building the intended platform
 - CPU-hotplug was broken on ux500
 - Coresight was broken on Juno (never worked)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWLmRS2CrR//JCVInAQKrkQ//bd8TCGXA0tRwDMEGejtWChZcNkGZDaer
 sNMyE/c1p5+/4euSmf3jW1JsIx4JDtjr0psKeRpgYId8GVdvaYceFbSMJl6o9hDc
 pm3sqb66xEgrWQoSBA2Urz/RhSIrxkYbuTpYbN4teV9I/IFgTUggaBSzfkq3SLRE
 bEVSbCw0S/6t3vJgW4CKCI75+a3NexqImvi8txNwueQQMnDLnOkG97vMUQJgDq0j
 E+CeOk0mvlGF+TiVoAhUxT3YIt8azUTfUVw7CBIRvo/49sUCiETk6xie93FaC7GI
 Tmg9KK+oZhrmqt8PBGkikxQMHATnKrfJbMNi/K6nrxW91ylSkwTN/7jfhSjFDrdI
 4WNB2x3u6KUnQ0XOKVY36gUnV8kJ/2K9pTZpq0K7m4czo8YAid9LumvDnqhPI0Xg
 fXxq3YBx7AfzsdBL3+nQ7AH3tr9Bvt01kMZwYwNgpqtglEBScAgzyrPG/yyTBFq7
 KOkoyNojTaHZHcDtYqSaxYls+2tdeyvYuQJ7QGQ5DJCW99NgbRuFfIUJvgwRPoKt
 13ioIJxDUHmemR6xFURWVH1dPkkqwtJht7us5jcxuxBL9ZhmEb6vophvyxj62zTZ
 8A+PE3cC1azhKph7rVrUl9KEoYZzedwDaTGBNpYz1gN7DxDvWHYINEPB4bBLzYmv
 uWsSYVbV2Qs=
 =A3U6
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late DT updates from Arnd Bergmann:
 "These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

  This includes two branches for arm64 dt updates, both following up on
  earlier changes for the same platforms that are already merged:

  Samsung:
   - add USB3 support in Exynos7
   - minor PM related updates

  Amlogic:
   - new machines: WeTek Set-top-boxes
   - various devices added to DT

  There are also a couple of bugfixes that trickled in since the start
  of the merge window:

   - The moxart_defconfig was not building the intended platform
   - CPU-hotplug was broken on ux500
   - Coresight was broken on Juno (never worked)"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
  ARM: deconfig: fix the moxart defconfig
  ARM: ux500: resume the second core properly
  arm64: dts: juno: update definition for programmable replicator
  arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost
  arm64: dts: exynos: Add USB 3.0 controller node for Exynos7
  arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7
  pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions
  arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e
  ARM64: dts: meson-gxbb-p200: add ADC laddered keys
  ARM64: dts: meson: meson-gx: add the SAR ADC
  ARM64: dts: meson-gxl: add the pwm_ao_b pin
  ARM64: dts: meson-gx: add the missing pwm_AO_ab node
  clk: gxbb: fix CLKID_ETH defined twice
  ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
  clk: gxbb: add the SAR ADC clocks and expose them
  dt-bindings: amlogic: Add WeTek boards
  ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
  dt-bindings: vendor-prefix: Add wetek vendor prefix
  ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
  ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
  ...
2017-03-03 16:15:48 -08:00
Linus Torvalds
080e4168c0 More power management updates for v4.11-rc1
- Fix for a cpuidle menu governor problem that started to take an
    unnecessary spinlock after one of the recent updates and that
    did not play well with the RT patch (Rafael Wysocki).
 
  - Fix for the new intel_pstate operation mode switching feature
    added recently that did not reinitialize P-state limits properly
    when switching operation modes (Rafael Wysocki).
 
  - Removal of unused global notifiers from the PM QoS framework
    (Viresh Kumar).
 
  - Generic power domains framework update to make it handle
    asynchronous invocations of PM callbacks in the "noirq" phases
    of system suspend/hibernation correctly (Ulf Hansson).
 
  - Two hibernation core cleanups (Rafael Wysocki).
 
  - intel_idle cleanup related to the sysfs interface (Len Brown).
 
  - Off-by-one bug fix in the OPP (Operating Performance Points)
    framework (Andrzej Hajda).
 
  - OPP framework's documentation fix (Viresh Kumar).
 
  - cpufreq qoriq driver cleanup (Tang Yuantian).
 
  - Fixes for typos in comments in the device runtime PM framework
    (Christophe Jaillet).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJYuLeGAAoJEILEb/54YlRxJvcP/0BRmh8Hn4Itx/NIWNg71X6j
 U+v8Pn8T3MP33gCcleLYlgre2JUIAUDmhdK99+UOx+/abhjMhQSaF3HhTOwYaPtQ
 6njoHVS0NnfqUf+x5kp+EpRxBVNucYVbdRTVd1DsHIeLLz/96DFOzb/R7tko/pKx
 pFMWvNdotHLLgXOG1UvdRimwTDlFMffxFzD8Se53LPjRXS0S73A5VWfqZOye44Re
 j3W1AJ0Idgq5uduA6J8x1MWbaxDq1h+j6CSUm05yvqrINzxXwXt0Hv6stCQTo+Gb
 YMdiBd8MujNyAgcchw3jiDQ8Vp+zmfLPcHrfPe//SSefj26eB8LyVNSYelvbUdOz
 cNjvyErva37MmaegCL9QC7WbLM+A7VE6bU6YzDCi/rR8jYMJ51Fb9jGiYb/oimry
 OLlblEekikUsskWv4hGV1JVt5VhmUMlagWtexxn+lMszATcZro0tfXu/vgQWksYs
 noUnwuWJWxvj2aNMsvbzW3HLlTGSmYl2UxJ7IymQQaTDblwF9Kg61rm3+5coUctd
 ifceynDVp9Gju25faYgZ+Dq9+o8ktlOGOHRRPdLIRNJ/T+4tUDnlGkdbPb+Tfn03
 XUIzYCu74U8/oW8gOk6t0WpmWzvxEXNgdirdEIR6y3loYIC0Jr3v4gyD975Eug74
 Hzfrdg7ignAmWV+nf6UY
 =SeUF
 -----END PGP SIGNATURE-----

Merge tag 'pm-extra-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management updates deom Rafael Wysocki:
 "These fix two bugs introduced by recent power management updates (in
  the cpuidle menu governor and intel_pstate) and a few other issues,
  clean up things and remove unused code.

  Specifics:

   - Fix for a cpuidle menu governor problem that started to take an
     unnecessary spinlock after one of the recent updates and that did
     not play well with the RT patch (Rafael Wysocki).

   - Fix for the new intel_pstate operation mode switching feature added
     recently that did not reinitialize P-state limits properly when
     switching operation modes (Rafael Wysocki).

   - Removal of unused global notifiers from the PM QoS framework
     (Viresh Kumar).

   - Generic power domains framework update to make it handle
     asynchronous invocations of PM callbacks in the "noirq" phases of
     system suspend/hibernation correctly (Ulf Hansson).

   - Two hibernation core cleanups (Rafael Wysocki).

   - intel_idle cleanup related to the sysfs interface (Len Brown).

   - Off-by-one bug fix in the OPP (Operating Performance Points)
     framework (Andrzej Hajda).

   - OPP framework's documentation fix (Viresh Kumar).

   - cpufreq qoriq driver cleanup (Tang Yuantian).

   - Fixes for typos in comments in the device runtime PM framework
     (Christophe Jaillet)"

* tag 'pm-extra-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / OPP: Documentation: Fix opp-microvolt in examples
  intel_idle: stop exposing platform acronyms in sysfs
  cpufreq: intel_pstate: Fix limits issue with operation mode switching
  PM / hibernate: Define pr_fmt() and use pr_*() instead of printk()
  PM / hibernate: Untangle power_down()
  cpuidle: menu: Avoid taking spinlock for accessing QoS values
  PM / QoS: Remove global notifiers
  PM / runtime: Fix some typos
  cpufreq: qoriq: clean up unused code
  PM / OPP: fix off-by-one bug in dev_pm_opp_get_max_volt_latency loop
  PM / Domains: Power off masters immediately in the power off sequence
  PM / Domains: Rename is_async to one_dev_on for genpd_power_off()
  PM / Domains: Move genpd_power_off() above genpd_power_on()
2017-03-02 17:33:52 -08:00
Rafael J. Wysocki
21ff03c484 Merge branches 'pm-core', 'pm-qos', 'pm-domains' and 'pm-opp'
* pm-core:
  PM / runtime: Fix some typos

* pm-qos:
  PM / QoS: Remove global notifiers

* pm-domains:
  PM / Domains: Power off masters immediately in the power off sequence
  PM / Domains: Rename is_async to one_dev_on for genpd_power_off()
  PM / Domains: Move genpd_power_off() above genpd_power_on()

* pm-opp:
  PM / OPP: Documentation: Fix opp-microvolt in examples
  PM / OPP: fix off-by-one bug in dev_pm_opp_get_max_volt_latency loop
2017-03-03 00:34:44 +01:00
Arnd Bergmann
d4b80d9aac Merge branch 'next/late' with mainline
* next/late: (25 commits)
  arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost
  arm64: dts: exynos: Add USB 3.0 controller node for Exynos7
  arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7
  pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions
  arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e
  ARM64: dts: meson-gxbb-p200: add ADC laddered keys
  ARM64: dts: meson: meson-gx: add the SAR ADC
  ARM64: dts: meson-gxl: add the pwm_ao_b pin
  ARM64: dts: meson-gx: add the missing pwm_AO_ab node
  clk: gxbb: fix CLKID_ETH defined twice
  clk: samsung: exynos5433: Add data for 250MHz and 278MHz PLL rates
  clk: samsung: exynos5433: Add IDs for PHYCLK_MIPIDPHY0_* clocks
  ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
  clk: gxbb: add the SAR ADC clocks and expose them
  dt-bindings: amlogic: Add WeTek boards
  ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
  dt-bindings: vendor-prefix: Add wetek vendor prefix
  ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
  ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
  ARM64: dts: meson-gxbb-vega-s95: Add LED
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-03-02 17:52:44 +01:00
Viresh Kumar
28db0c7b1c PM / OPP: Documentation: Fix opp-microvolt in examples
The triplet present in "opp-microvolt" property should be in the order
<target min max>, while all the examples have it in the order
<min target max>.

Fix it.

Luckily all of the users of "opp-microvolt" property have applied brain
instead of copying the examples from documentation and none of the
actual dts files have it wrong.

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-03-01 22:47:30 +01:00
Linus Torvalds
544a068f1f Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:

 - add thermal driver for R-Car Gen3 thermal sensors.

 - add thermal driver for ZTE' zx2967 family thermal sensors.

 - convert thermal ID allocation from IDR to IDA.

 - fix a possible NULL dereference in imx thermal driver.

 - fix a ti-soc-thermal driver dependency issue so that critical thermal
   control is still available when CPU_THERMAL is not defined.

 - update binding information for QorIQ thermal driver.

 - a couple of cleanups in thermal core, intel_powerclamp, exynos,
   dra752-thermal, mtk-thermal driver.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  powerpc/mpc85xx: Update TMU device tree node for T1023/T1024
  powerpc/mpc85xx: Update TMU device tree node for T1040/T1042
  dt-bindings: Update QorIQ TMU thermal bindings
  thermal: mtk_thermal: Staticise a number of data variables
  thermal: arm: dra752: Remove all TSHUT related definitions
  thermal: arm: dra752: Remove TSHUT configuration
  thermal: ti-soc-thermal: Remove CPU_THERMAL Dependency from TI_THERMAL
  thermal: imx: Fix possible NULL dereference.
  thermal: exynos: Remove parsing unused samsung,tmu_cal_mode property
  thermal: zx2967: add thermal driver for ZTE's zx2967 family
  thermal: use cpumask_var_t for on-stack cpu masks
  dt: bindings: add documentation for zx2967 family thermal sensor
  thermal/intel_powerclamp: Remove set-but-not-used variables
  thermal: rcar_gen3_thermal: Add R-Car Gen3 thermal driver
  thermal: rcar_gen3_thermal: Document the R-Car Gen3
  thermal: convert devfreq_cooling to use an IDA
  thermal: convert cpu_cooling to use an IDA
  thermal: convert clock cooling to use an IDA
  thermal core: convert ID allocation to IDA
2017-03-01 09:54:32 -08:00
Linus Torvalds
545b2820c4 pwm: Changes for v4.11-rc1
This set contains mostly fixes to existing drivers as well as cleanup of
 code that's not been in active use for a while.
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEEiOrDCAFJzPfAjcif3SOs138+s6EFAli1+XgZHHRoaWVycnku
 cmVkaW5nQGdtYWlsLmNvbQAKCRDdI6zXfz6zoX8LD/4l8MeOgKo+uWsfX7tY1kQ/
 gWitT/g+jCl3kXYtmcDTaLbEnNr0b5tGahmYC7rnCLhoq6Sp1VXjm6LChuoIUrMF
 r53IlUEEgHhClfCK/vqrp/kZoFndmtLZN2V6K8gpM730nNLYAwH6FhGmUFYp47Sm
 Xfdl5PwuSVDNnrBehjXPuAqUpFTp8lzrZsRkFrbX5a6TJ7hjn0TwNdovdGa6pV7k
 0LXKBfSGTRS2BxDmAFqXItC2USG7v3WRCDc4jCtykNLyQKU1yCA+AYwgR9+1jj8o
 1I07gjbZ+Fp8hzcQw/88MdodtS1xGV75WquhYLYWTgbneEWAcRVM47wklvL5gm7O
 70lIAvOveSFGjFoWnB9YACkOoZIxDINLhWwBD0Ytfpu/gaj3VsP/WrdMu6dk5kWq
 va4XHCS+dObT3o4fRkxQsQJVhAJmg4000Mupg4DOgaigd1PmFLFjBsmHua4+Ssf5
 c+y+SVAg8+c3jqA9mHxPJAJesJ41fXBQCB1Xy8pDOe8iK9fBiZjkq2ssiDerN0kI
 Sc4+hZHaGRhJqZUItvKJvNhdvrPkzQsRjrZgVLW/bDEXek3SXEmBAFsuZnr6w4BZ
 TVVxTNzg+h4obJZEay/P6oWO6KDfF/RyTK0CUHj/ORHxbqUViiwlSJkTVgp7Etd6
 mJj0xObBIwUGnSYvqGcShA==
 =J9q4
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This set contains mostly fixes to existing drivers as well as cleanup
  of code that's not been in active use for a while"

* tag 'pwm/for-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (27 commits)
  acpi: lpss: call pwm_add_table() for BSW PWM device
  pwm: Try to load modules during pwm_get()
  pwm: Don't hold pwm_lookup_lock longer than necessary
  pwm: Make the PWM_POLARITY flag in DTB optional
  pwm: Print error messages with pr_err() instead of pr_debug()
  pwm: imx: Add polarity inversion support to i.MX's PWMv2
  pwm: imx: doc: Update imx-pwm.txt documentation entry
  pwm: imx: Remove redundant i.MX PWMv2 code
  pwm: imx: Provide atomic PWM support for i.MX PWMv2
  pwm: imx: Move PWMv2 wait for fifo slot code to a separate function
  pwm: imx: Move PWMv2 software reset code to a separate function
  pwm: imx: Rewrite v1 code to facilitate switch to atomic PWM
  pwm: imx: Add separate set of PWM ops for v1 and v2
  pwm: imx: Remove ipg clock and enable per clock when required
  pwm: lpss: Add Intel Gemini Lake PCI ID
  pwm: lpss: Do not export board infos for different PWM types
  pwm: lpss: Avoid reconfiguring while UPDATE bit is still enabled
  pwm: lpss: Switch to new atomic API
  pwm: lpss: Allow duty cycle to be 0
  pwm: lpss: Avoid potential overflow of base_unit
  ...
2017-03-01 09:46:02 -08:00
Linus Torvalds
86292b33d4 Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton:

 - a few MM remainders

 - misc things

 - autofs updates

 - signals

 - affs updates

 - ipc

 - nilfs2

 - spelling.txt updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (78 commits)
  mm, x86: fix HIGHMEM64 && PARAVIRT build config for native_pud_clear()
  mm: add arch-independent testcases for RODATA
  hfs: atomically read inode size
  mm: clarify mm_struct.mm_{users,count} documentation
  mm: use mmget_not_zero() helper
  mm: add new mmget() helper
  mm: add new mmgrab() helper
  checkpatch: warn when formats use %Z and suggest %z
  lib/vsprintf.c: remove %Z support
  scripts/spelling.txt: add some typo-words
  scripts/spelling.txt: add "followings" pattern and fix typo instances
  scripts/spelling.txt: add "therfore" pattern and fix typo instances
  scripts/spelling.txt: add "overwriten" pattern and fix typo instances
  scripts/spelling.txt: add "overwritting" pattern and fix typo instances
  scripts/spelling.txt: add "deintialize(d)" pattern and fix typo instances
  scripts/spelling.txt: add "disassocation" pattern and fix typo instances
  scripts/spelling.txt: add "omited" pattern and fix typo instances
  scripts/spelling.txt: add "explictely" pattern and fix typo instances
  scripts/spelling.txt: add "applys" pattern and fix typo instances
  scripts/spelling.txt: add "configuartion" pattern and fix typo instances
  ...
2017-02-27 23:09:29 -08:00
Linus Torvalds
5782fd14aa RTC for 4.11
Subsystem:
  - constify rtc_class_ops structures
 
 New driver:
  - STM32
 
 Drivers:
  - armada38x: fix errata, Armada 7K/8K support
  - ds3232: fix wakeup support
  - gemini: DT support
  - m48t86: huge cleanup and platform_data removal
  - mcp795: alarm support
  - sun6i: proper oscillator handling
  - tegra: proper clock handling
  - tps65910: calibration support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEl0I5XWmUIrwBfFMm2KKDO9oT4sIFAlizZLQACgkQ2KKDO9oT
 4sISIw//Zl96KIXqeC+En+8v8Sa0pham/mcLbKYujnFIi1mMaesEXJJClALXYAGQ
 r/fwXkYowC14AMXGuV5vMMVAVisJpj1gtMmpom+9/7mYtkFOIUsB8Sis8dMqgTqx
 JFBho7JvPJcwE7BLzUNRzX4tWhFhNm0epyMrsrQrBSeLx3PD8xg5v2kPYuZHdYU0
 63Bovkq6zvH9/WdO8DLXw/nc/Y0Bo66rlvJkcaNfjBrdFTRvRAM5JIiJuxewR+jY
 3bTQ8PQjnHAWIj/RhrwguGTLDlgJKcpitB06Y53TdRaNtVfJuEN8z6EjNkR37kyS
 ZJnPgihCoH6l7v28uY4e5BAg/Fe3ZhDrPmhZWq8rEkByeQpSUWgrE/DtcoC0OkZO
 l2fU/y2vq4za7CpRPp5bvq3sF0PbRHSF0o8rvmHlQZI/mwwYbwF9gk1vg5adyH7i
 1UuTGoDXxcMYZPJm3zezE1bUa4OAyjH1NhrvPvinlDw+aekaai2eFUKIbJim+dJx
 tEVPATPlDk/Ngwth1hpE8D/tOdoQhWtfNk7+zo7MNtMjAO1h/DxSLHXJ9mvCwcPh
 lPT9BmQxT1HECIa5gjN1R+5X5or5z8LPcNGO9TedIchfZ8qBGzsWOt9bXlw2dgI2
 qmXo6IrjCN88kf+qsVA4FKLmaqgpb9+Yb+5cPlhEOKvxUhY47Nc=
 =Go5q
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Subsystem:
   - constify rtc_class_ops structures

 New driver:
   - STM32

 Drivers:
   - armada38x: fix errata, Armada 7K/8K support
   - ds3232: fix wakeup support
   - gemini: DT support
   - m48t86: huge cleanup and platform_data removal
   - mcp795: alarm support
   - sun6i: proper oscillator handling
   - tegra: proper clock handling
   - tps65910: calibration support"

* tag 'rtc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (44 commits)
  rtc: ds3232: Call device_init_wakeup before device_register
  rtc: pcf2127: bulk read only date and time registers.
  rtc: armada38x: Add support for Armada 7K/8K
  rtc: armada38x: Prepare driver to manage different versions
  rtc: ds3232: Add regmap max_register definition.
  rtc: ds3232: Cleanup whitespace around register and bit definitions.
  rtc: m48t86: remove unused platform_data
  ARM: Orion5x: ts78xx: allow rtc-m48t86 to manage it's own resources
  ARM: Orion5x: ts78xx: remove RTC detection
  ARM: ep93xx: ts72xx: allow rtc-m48t86 to manage its own resources
  rtc: m48t86: verify that the RTC is actually present
  rtc: m48t86: add NVRAM support
  rtc: m48t86: allow driver to manage its resources
  rtc: m48t86: shorten register name defines
  bindings: rtc: correct wrong reference in required properties
  rtc: sun6i: Fix return value check in sun6i_rtc_clk_init()
  rtc: sun6i: extend test coverage
  rtc: sun6i: Fix compatibility with old DT binding
  rtc: snvs: add a missing write sync
  rtc: bq32000: add support to enable disable the trickle charge FET bypass
  ...
2017-02-27 19:59:21 -08:00
Masahiro Yamada
4091fb95b5 scripts/spelling.txt: add "followings" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:

  followings||following

While we are here, add a missing colon in the boilerplate in DT binding
documents.  The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as
well.

I reworded "as the followings:" to "as follows:" for
drivers/usb/gadget/udc/renesas_usb3.c.

Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:47 -08:00
Masahiro Yamada
9332ef9dbd scripts/spelling.txt: add "an user" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:

  an user||a user
  an userspace||a userspace

I also added "userspace" to the list since it is a common word in Linux.
I found some instances for "an userfaultfd", but I did not add it to the
list.  I felt it is endless to find words that start with "user" such as
"userland" etc., so must draw a line somewhere.

Link: http://lkml.kernel.org/r/1481573103-11329-4-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:46 -08:00
Masahiro Yamada
08a7e621ff scripts/spelling.txt: add "swith" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:

  swith||switch
  swithable||switchable
  swithed||switched
  swithing||switching

While we are here, fix the "update" to "updates" in the touched hunk in
drivers/net/wireless/marvell/mwifiex/wmm.c.

Link: http://lkml.kernel.org/r/1481573103-11329-2-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:46 -08:00
Linus Torvalds
e5d56efc97 Watchdog updates for v4.11
Key changes:
 
 - New drivers:
   Cortina Gemini
   ZTE's zx2967 family
   NIC7018
 - Convert to use device managed functions:
   ebc-c384_wdt, tegra_wdt, da9063_wdt, da9062_wdt, da9055_wdt, da9052_wdt,
   bcm2835_wdt, mena21_wdt, wm831x_wdt, digicolor_wdt, intel-mid_wdt,
   meson_wdt, sunxi_wdt, aspeed_wdt, coh901327_wdt, iTCO_wdt
 - Use watchdog core to install restart handler:
   tangox, dw_wdt, bcm2835_wdt, asm9260_wdt, bcm47xx_wdt
 - Convert ts72xx_wdt driver to watchdog core
 - Let core handle heartbeat in ep93xx_wdt driver
 - Enable COMPILE_TEST where possible
 - Various other improvements
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYsxi0AAoJEMsfJm/On5mBvQUP/18lxvT9h4aHy765X7S8CfDj
 0+9WsDXDMSgkX1yRjZaIf07IiZoRTQMj083wtveAL4fgkWUEFJsVvYTahsKSvZN4
 Uvuh3h/nIiB1ggnGjqNmgUefzLUwgwST+gT0ixm/mzQzFkkfw0xCCrlM3TvMrd4V
 Z5A4t3rwUngsAl50jIE8411bC5xCnTsC56EJNyDkDmV2lmVXTdd+cQBTBtBIWFZv
 RMXdMBOD1Uk/B0J0iakswo8OpuVfK3P56JAloHfangbDNX2WfhcwuohTwNO+xcXc
 ElHsMlhBeUXIzQ04WCp1o+zGnIkdvbOpZOY+3wq5/ph0D4TcEO7w2kogGhZDhT9+
 yeLD6CBOrsL+sOCxfBCAZ4REUVbg/1iVD4iNJMd97ntUIXlFHcgu0r1d5c1SSPfi
 URypb9cSPOEPWQTBvwCPP0w/0MEj5Wak0mTziHrX65F9r3ANSghZcWz4TQZIYhMw
 xj6g5l+istSUQZMSaY4RquUEGiGlGm8IrvEs87LsOsPI7sPzFAhhuE40sL9QrZie
 jwSHyniNKd77r521UGchbszqf5uapqlifu+S0S96ZvwTTQvFTlF87/DlES07HBr8
 BWzOpakh0+Mm30HwJsuD50hllR4GM1pu6O9BNxp+655ln3Hc04TVM9RYRqZ13K4X
 Ni7ENTvSuOHyxVwuP/zA
 =6RxF
 -----END PGP SIGNATURE-----

Merge tag 'watchdog-for-linus-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull watchdog updates from Guenter Roeck:
 "Wim asked me to handle the watchdog pull request this time around.

  Key changes:

   - New drivers: Cortina Gemini, ZTE's zx2967 family, NIC7018

   - Convert to use device managed functions: ebc-c384_wdt, tegra_wdt,
     da9063_wdt, da9062_wdt, da9055_wdt, da9052_wdt, bcm2835_wdt,
     mena21_wdt, wm831x_wdt, digicolor_wdt, intel-mid_wdt, meson_wdt,
     sunxi_wdt, aspeed_wdt, coh901327_wdt, iTCO_wdt

   - Use watchdog core to install restart handler: tangox, dw_wdt,
     bcm2835_wdt, asm9260_wdt, bcm47xx_wdt

   - Convert ts72xx_wdt driver to watchdog core

   - Let core handle heartbeat in ep93xx_wdt driver

   - Enable COMPILE_TEST where possible

   - Various other improvements"

* tag 'watchdog-for-linus-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (54 commits)
  watchdog: s3c2410: Add prefix to local function
  watchdog: s3c2410: Select MFD_SYSCON on all Exynos platforms
  watchdog: s3c2410: Use dev_dbg instead of pr_info
  watchdog: s3c2410: Fix infinite interrupt in soft mode
  watchdog: s3c2410: Remove confusing CONFIG prefix from local defines
  watchdog: softdog: make pretimeout support a compile option
  watchdog: zx2967: add watchdog controller driver for ZTE's zx2967 family
  dt: bindings: add documentation for zx2967 family watchdog controller
  watchdog: sama5d4: Implement resume hook
  watchdog: sama5d4: Cache MR instead of a partial config
  watchdog: ts72xx_wdt: convert driver to watchdog core
  watchdog: ep93xx_wdt: cleanup and let the core handle the heartbeat
  watchdog: RDC321X_WDT always depends on PCI
  watchdog: add driver for Cortina Gemini watchdog
  watchdog: add DT bindings for Cortina Gemini
  watchdog: constify watchdog_ops structures
  watchdog: Introduce watchdog_stop_on_unregister helper
  watchdog: ebc-c384_wdt: Utilize devm_ functions in driver probe callback
  watchdog: tegra_wdt: Convert to use device managed functions
  watchdog: da9063_wdt: Convert to use device managed functions
  ...
2017-02-26 13:19:17 -08:00
Linus Torvalds
5d8a00eee2 The usual collection of new drivers, non-critical fixes, and updates
to existing clk drivers. The bulk of the work is on Allwinner and
 Rockchip SoCs, but there's also an Intel Atom driver in here too.
 
 New Drivers:
  - Tegra BPMP firmware
  - Hisilicon hi3660 SoCs
  - Rockchip rk3328 SoCs
  - Intel Atom PMC
  - STM32F746
  - IDT VersaClock 5P49V5923 and 5P49V5933
  - Marvell mv98dx3236 SoCs
  - Allwinner V3s SoCs
 
 Removed Drivers:
  - Samsung Exynos4415 SoCs
 
 Updates:
  - Migrate ABx500 to OF
  - Qualcomm IPQ4019 CPU clks and general PLL support
  - Qualcomm MSM8974 RPM
  - Rockchip non-critical fixes and clk id additions
  - Samsung Exynos4412 CPUs
  - Socionext UniPhier NAND and eMMC support
  - ZTE zx296718 i2s and other audio clks
  - Renesas CAN and MSIOF clks for R-Car M3-W
  - Renesas resets for R-Car Gen2 and Gen3 and RZ/G1
  - TI CDCE913, CDCE937, and CDCE949 clk generators
  - Marvell Armada ap806 CPU frequencies
  - STM32F4* I2S/SAI support
  - Broadcom BCM2835 DSI support
  - Allwinner sun5i and A80 conversion to new style clk bindings
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJYsLxxAAoJEK0CiJfG5JUl0p0P/AiBaYvrmHBx3H9jdC3iQxd2
 7luFN3OqpykmZc3xx2xO3WaZ96kwwxiMu8sj3+VQo6oCkEuOY2ru6uPiDOcF4P3+
 8ku2taoWlESDbVLebVTNJoRXBaBLaV+9BCN7AKvXpVw+/UkJI5hgr0yMdh4tgtvu
 K08tTMkDNDbA33KXuJo8/chQFqi2W6XBXk22YMkqqA8jx0F4EM759LcgUlD1YfBS
 HKkgSOgsW3Zwhl27ZEAJMthcmS4+wFaEgFBeipg/hxTLI3aQtmDtRfXwg0wkbBx2
 8sVz9SyBwkjOT9+41kve+Je94NK3blnJEjbxPASveMwyhdX1TlDQCPfrXya/1zxz
 N1By1NpA6iEYwi4hy+OtBYlcsBHztAM/+eljDY2kEDvfiKjMa44GYmgBu4n8pq+n
 75NJxws6ZkzPs5/QsLT3hvTaL1SNX6PaEW8HabDXO40ccZc4CYvFZVOXMAnKaXzZ
 31hj8EvQ5x6hci+SPYyVu6j3ipOxN96VcZqEJ+hWyyuZEMK6Up1o/0lGZFgwa0UD
 SIl7RiTFKO6ko+8hYlk1g0DGtEyWDsdso1Bw4zaHwMngM/CwjJVzpK5T2t1fJyEh
 lN5MdhcOi0nsiRWdRxOwOlHDLf93qSo87mvseU1MCEXYN1aqTV3VxSm1YU8ZgQVk
 sAjpsJqj45enfDa9BmIt
 =o8o/
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The usual collection of new drivers, non-critical fixes, and updates
  to existing clk drivers. The bulk of the work is on Allwinner and
  Rockchip SoCs, but there's also an Intel Atom driver in here too.

  New Drivers:
   - Tegra BPMP firmware
   - Hisilicon hi3660 SoCs
   - Rockchip rk3328 SoCs
   - Intel Atom PMC
   - STM32F746
   - IDT VersaClock 5P49V5923 and 5P49V5933
   - Marvell mv98dx3236 SoCs
   - Allwinner V3s SoCs

  Removed Drivers:
   - Samsung Exynos4415 SoCs

  Updates:
   - Migrate ABx500 to OF
   - Qualcomm IPQ4019 CPU clks and general PLL support
   - Qualcomm MSM8974 RPM
   - Rockchip non-critical fixes and clk id additions
   - Samsung Exynos4412 CPUs
   - Socionext UniPhier NAND and eMMC support
   - ZTE zx296718 i2s and other audio clks
   - Renesas CAN and MSIOF clks for R-Car M3-W
   - Renesas resets for R-Car Gen2 and Gen3 and RZ/G1
   - TI CDCE913, CDCE937, and CDCE949 clk generators
   - Marvell Armada ap806 CPU frequencies
   - STM32F4* I2S/SAI support
   - Broadcom BCM2835 DSI support
   - Allwinner sun5i and A80 conversion to new style clk bindings"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (130 commits)
  clk: renesas: mstp: ensure register writes complete
  clk: qcom: Do not drop device node twice
  clk: mvebu: adjust clock handling for the CP110 system controller
  clk: mvebu: Expand mv98dx3236-core-clock support
  clk: zte: add i2s clocks for zx296718
  clk: sunxi-ng: sun9i-a80: Fix wrong pointer passed to PTR_ERR()
  clk: sunxi-ng: select SUNXI_CCU_MULT for sun5i
  clk: sunxi-ng: Check kzalloc() for errors and cleanup error path
  clk: tegra: Add BPMP clock driver
  clk: uniphier: add eMMC clock for LD11 and LD20 SoCs
  clk: uniphier: add NAND clock for all UniPhier SoCs
  ARM: dts: sun9i: Switch to new clock bindings
  clk: sunxi-ng: Add A80 Display Engine CCU
  clk: sunxi-ng: Add A80 USB CCU
  clk: sunxi-ng: Add A80 CCU
  clk: sunxi-ng: Support separately grouped PLL lock status register
  clk: sunxi-ng: mux: Get closest parent rate possible with CLK_SET_RATE_PARENT
  clk: sunxi-ng: mux: honor CLK_SET_RATE_NO_REPARENT flag
  clk: sunxi-ng: mux: Fix determine_rate for mux clocks with pre-dividers
  clk: qcom: SDHCI enablement on Nexus 5X / 6P
  ...
2017-02-25 14:28:06 -08:00
Linus Torvalds
7067739df2 Merge branch 'i2c/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
 "I2C has for you two new drivers (Tegra BPMP and STM32F4), interrupt
  support for pca954x muxes, and a bunch of driver bugfixes and
  improvements. Nothing really special this cycle.

  A few commits have been added to my tree just recently. Those are the
  Tegra BPMP driver and a few straightforward bugfixes or cleanups which
  I prefer to have upstream rather soonish. The rest had proper
  linux-next exposure"

* 'i2c/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (25 commits)
  i2c: thunderx: Replace pci_enable_msix()
  i2c: exynos5: fix arbitration lost handling
  i2c: exynos5: disable fifo-almost-empty irq signal when necessary
  i2c: at91: ensure state is restored after suspending
  i2c: bcm2835: Avoid possible NULL ptr dereference
  i2c: Add Tegra BPMP I2C proxy driver
  dt-bindings: Add Tegra186 BPMP I2C binding
  misc: eeprom: at24: use device_property_*() functions instead of of_get_property()
  i2c: mux: pca954x: Add interrupt controller support
  dt: bindings: i2c-mux-pca954x: Add documentation for interrupt controller
  i2c: mux: pca954x: Add missing pca9542 definition to chip_desc
  i2c: riic: correctly finish transfers
  i2c: i801: Add support for Intel Gemini Lake
  i2c: mux: pca9541: Export OF device ID table as module aliases
  i2c: mux: pca954x: Export OF device ID table as module aliases
  i2c: mux: mlxcpld: remove unused including <linux/version.h>
  i2c: busses: constify i2c_algorithm structures
  i2c: i2c-mux-gpio: rename i2c-gpio-mux to i2c-mux-gpio
  i2c: sh_mobile: document support for r8a7796 (R-Car M3-W)
  i2c: i2c-cros-ec-tunnel: Reduce logging noise
  ...
2017-02-25 14:21:18 -08:00
Linus Torvalds
edccb59429 fbdev changes for v4.11:
- fix for font color when console is switched to another fb driver
 - deferred probing fixes for simplefb driver
 - preparations to add support of an optional GPIO to enable panel
   for ARM CLCD driver
 - some improvements for ssd1307fb driver
 - cleanups for OMAP fbdev LCD drivers
 - misc fixes/cleanups for various fb drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJYsGjqAAoJEH4ztj+gR8IL4YUQAJlGLprsiF8pOynXPhs5WmtW
 Z5X1ZuNakinLirRCq8MU6vGrUW5fDwjgYwRiVnIgk8CFg6ZH4yqrYGW6bMjJsE0y
 Aj3d5kacS0OlS5Iq5qyNcrSiLJeMljSRBJJf4+tpwOJSC/19oklpHMRE4+eR75gh
 3Yv47+CsCFlZgfXaByAOdYpWgCoGfB/qotGIohRjMRi7jeBM1vOwpJUcihBIQq98
 PceOUhnQ2puS0Bx7LU7GDRQDcfU5iP5tmN33Nv+c2Jofec4zZ3bEgT2MI8EXLEla
 zqGF9VzL9rUnpBt2AFtXts3+VgQ3JdIYy2FEGpKdtw9pN3X3I2oJrhChf/4jblj8
 LKT++BLRwpGc9o5xDnyfjPWbRIcKCuOMlzKeMuPhoV9cSLv3fwilew2xqLaSx9Qv
 RvhHDnTtbsU8UUruGKqUBNgdu0jysRt7f8btRWHBXflWqYN5qfxG7nbMa5UzHQQf
 4hXDyUUQuuv6a7BHV1Cp1wOI+fBTo4+Gt+oFwXWE8YIORHGfbAZ+PlZ3C2vkCw9O
 SOwdh5EJThBPNqxRQXtGUcN56VBXY6dgXCe9XLSTv+coUp9urTq1wOl2CQK2Y4Fu
 jWtKPl+JOS1Wu96roDJL5on3yhn98CXK6kcOBXmUSN+qZqKYgpwkfopNECOdT+DU
 Gy0fiTKWY9/JD5tfrbQd
 =eASt
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-v4.11' of git://github.com/bzolnier/linux

Pull fbdev updates from Bartlomiej Zolnierkiewicz:

 - fix for font color when console is switched to another fb driver

 - deferred probing fixes for simplefb driver

 - preparations to add support of an optional GPIO to enable panel for
   ARM CLCD driver

 - some improvements for ssd1307fb driver

 - cleanups for OMAP fbdev LCD drivers

 - misc fixes/cleanups for various fb drivers

* tag 'fbdev-v4.11' of git://github.com/bzolnier/linux: (30 commits)
  video: fbdev: fsl-diu-fb: fix spelling mistake "palette"
  fbdev: ssd1307fb: include linux/gpio/consumer.h
  video: fbdev: fsl-diu-fb: remove impossible condition
  video: fbdev: amifb: remove impossible condition
  fbdev/ssd1307fb: clear screen in probe
  fbdev/ssd1307fb: add support to enable VBAT
  fbdev: ssd1307fb: Make reset gpio devicetree property optional
  fbdev: ssd1307fb: Remove reset-active-low from the DT binding document
  fbdev: ssd1307fb: Start to use gpiod API for reset gpio
  video: fbdev: sh_mobile_lcdcfb: fix error return code in sh_mobile_lcdc_probe()
  video: fbdev: offb: switch to using for_each_node_by_type
  video/console: use setup_timer and mod_timer instead of init_timer
  fbdev: omap/lcd: Make callbacks optional
  fbdev: omap/lcd: Staticize non-exported lcd_panel structs
  fbdev: omap/lcd: Remove no-op driver callbacks
  video/mbx: use simple_open()
  video: fbdev: stifb: handle NULL return value from ioremap_nocache
  video: fbdev: pmagb-b-fb: Remove bad `__init' annotation
  video: fbdev: pmag-ba-fb: Remove bad `__init' annotation
  video: ARM CLCD: use panel device node for getting backlight and mode
  ...
2017-02-25 13:20:22 -08:00
Joe Perches
6e5c8381d1 treewide: Remove remaining executable attributes from source files
These are the current source files that should not have
executable attributes set.

[ Normally this would be sent through Andrew Morton's tree
  but his quilt tools don't like permission only patches. ]

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-25 12:12:50 -08:00
Krzysztof Kozlowski
0b445549ea watchdog: s3c2410: Fix infinite interrupt in soft mode
In soft (no-reboot) mode, the driver self-pings watchdog upon expiration
of an interrupt.  However the interrupt itself was not cleared thus on
first hit, the system enters infinite interrupt handling loop.

On Odroid U3 (Exynos4412), when booted with s3c2410_wdt.soft_noboot=1
argument the console is flooded:
	# killall -9 watchdog
	[   60.523760] s3c2410-wdt 10060000.watchdog: watchdog timer expired (irq)
	[   60.536744] s3c2410-wdt 10060000.watchdog: watchdog timer expired (irq)

Fix this by writing something to the WTCLRINT register to clear the
interrupt.  The register WTCLRINT however appeared in S3C6410 so a new
watchdog quirk and flavor are needed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24 14:00:23 -08:00
Baoyou Xie
df823c19e5 dt: bindings: add documentation for zx2967 family watchdog controller
This patch adds dt-binding documentation for zx2967 family
watchdog controller.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24 14:00:23 -08:00
Linus Walleij
428a66554a watchdog: add DT bindings for Cortina Gemini
This adds DT bindings for the Cortina systems Gemini SoC
watchdog timer.

Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-02-24 14:00:23 -08:00
Linus Torvalds
ef96152e6a Less anger inducing pull request for 4.11
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYr5aeAAoJEAx081l5xIa+ZK4P/RD3XUsduYqziVFCRQ2n0X8r
 +D92F4peTnSeSq7ZcZvprv+fezUGAHbfsWFs8feYCI5quUO6pEQSPwN+wyGazUi0
 4hUVB/K9Iq7U/Bj7Z/SmsU3NuWJnkNqbmvSFvUdqYK9D/kl+Tnllzap2N4cTzjwu
 GZOObz4n85cx94NqC3qw+7/ptL1X2MhXa+z0MzbkKyas84Bko1LwCSHRHsDKUnJc
 IcSpOcYZ6pSRMIsKH4Kd79Go4vWm7djXT9XL3PwDk2NcXXUOuR+cfdHqYchYaM/O
 iD2hvaSywBcflxSAml5x6vlXraoRd91ZZulgOObXtFfnUXdZB81TVq4uv6LU4Bx3
 jLFixUZuk/TJT+W/8N10l7M6yMIFaTpNoNMc5n4IF5RNNyWba4BKnrI+f+lQiOpY
 mmjIaidb0t5BICnJzCD264RhCEXmP0HaDV+iQQV6y6jJRXfd1bgnOXLKP73JekzB
 TsbDshCoE7UO0dJ7n0LFpXSTQDTYzlazoEp14f2kFBxir5/l7r67nUlnDTvUQfuN
 tSRvpN/s0wqvH3o7zhmpHxyJ/ZasPMQjNCFAuUEbx8L5SKXsua0FubIzN4aVpilb
 XvfdFRWM/lkOT/q+8cGI/TcE3YTqEmALmGxdV/akbdNCiCg6aClyCLRE/DZhgmSQ
 UMFjr9wlHl5Qo/OqLKj0
 =Yjfg
 -----END PGP SIGNATURE-----

Merge tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for v4.11.

  Nothing too major, the tinydrm and mmu-less support should make
  writing smaller drivers easier for some of the simpler platforms, and
  there are a bunch of documentation updates.

  Intel grew displayport MST audio support which is hopefully useful to
  people, and FBC is on by default for GEN9+ (so people know where to
  look for regressions). AMDGPU has a lot of fixes that would like new
  firmware files installed for some GPUs.

  Other than that it's pretty scattered all over.

  I may have a follow up pull request as I know BenH has a bunch of AST
  rework and fixes and I'd like to get those in once they've been tested
  by AST, and I've got at least one pull request I'm just trying to get
  the author to fix up.

  Core:
   - drm_mm reworked
   - Connector list locking and iterators
   - Documentation updates
   - Format handling rework
   - MMU-less support for fbdev helpers
   - drm_crtc_from_index helper
   - Core CRC API
   - Remove drm_framebuffer_unregister_private
   - Debugfs cleanup
   - EDID/Infoframe fixes
   - Release callback
   - Tinydrm support (smaller drivers for simple hw)

  panel:
   - Add support for some new simple panels

  i915:
   - FBC by default for gen9+
   - Shared dpll cleanups and docs
   - GEN8 powerdomain cleanup
   - DMC support on GLK
   - DP MST audio support
   - HuC loading support
   - GVT init ordering fixes
   - GVT IOMMU workaround fix

  amdgpu/radeon:
   - Power/clockgating improvements
   - Preliminary SR-IOV support
   - TTM buffer priority and eviction fixes
   - SI DPM quirks removed due to firmware fixes
   - Powerplay improvements
   - VCE/UVD powergating fixes
   - Cleanup SI GFX code to match CI/VI
   - Support for > 2 displays on 3/5 crtc asics
   - SI headless fixes

  nouveau:
   - Rework securre boot code in prep for GP10x secure boot
   - Channel recovery improvements
   - Initial power budget code
   - MMU rework preperation

  vmwgfx:
   - Bunch of fixes and cleanups

  exynos:
   - Runtime PM support for MIC driver
   - Cleanups to use atomic helpers
   - UHD Support for TM2/TM2E boards
   - Trigger mode fix for Rinato board

  etnaviv:
   - Shader performance fix
   - Command stream validator fixes
   - Command buffer suballocator

  rockchip:
   - CDN DisplayPort support
   - IOMMU support for arm64 platform

  imx-drm:
   - Fix i.MX5 TV encoder probing
   - Remove lower fb size limits

  msm:
   - Support for HW cursor on MDP5 devices
   - DSI encoder cleanup
   - GPU DT bindings cleanup

  sti:
   - stih410 cleanups
   - Create fbdev at binding
   - HQVDP fixes
   - Remove stih416 chip functionality
   - DVI/HDMI mode selection fixes
   - FPS statistic reporting

  omapdrm:
   - IRQ code cleanup

  dwi-hdmi bridge:
   - Cleanups and fixes

  adv-bridge:
   - Updates for nexus

  sii8520 bridge:
   - Add interlace mode support
   - Rework HDMI and lots of fixes

  qxl:
   - probing/teardown cleanups

  ZTE drm:
   - HDMI audio via SPDIF interface
   - Video Layer overlay plane support
   - Add TV encoder output device

  atmel-hlcdc:
   - Rework fbdev creation logic

  tegra:
   - OF node fix

  fsl-dcu:
   - Minor fixes

  mali-dp:
   - Assorted fixes

  sunxi:
   - Minor fix"

[ This was the "fixed" pull, that still had build warnings due to people
  not even having build tested the result. I'm not a happy camper

  I've fixed the things I noticed up in this merge.      - Linus ]

* tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux: (1177 commits)
  lib/Kconfig: make PRIME_NUMBERS not user selectable
  drm/tinydrm: helpers: Properly fix backlight dependency
  drm/tinydrm: mipi-dbi: Fix field width specifier warning
  drm/tinydrm: mipi-dbi: Silence: ‘cmd’ may be used uninitialized
  drm/sti: fix build warnings in sti_drv.c and sti_vtg.c files
  drm/amd/powerplay: fix PSI feature on Polars12
  drm/amdgpu: refuse to reserve io mem for split VRAM buffers
  drm/ttm: fix use-after-free races in vm fault handling
  drm/tinydrm: Add support for Multi-Inno MI0283QT display
  dt-bindings: Add Multi-Inno MI0283QT binding
  dt-bindings: display/panel: Add common rotation property
  of: Add vendor prefix for Multi-Inno
  drm/tinydrm: Add MIPI DBI support
  drm/tinydrm: Add helper functions
  drm: Add DRM support for tiny LCD displays
  drm/amd/amdgpu: post card if there is real hw resetting performed
  drm/nouveau/tmr: provide backtrace when a timeout is hit
  drm/nouveau/pci/g92: Fix rearm
  drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios
  drm/nouveau/hwmon: expose power_max and power_crit
  ..
2017-02-23 18:58:18 -08:00
Linus Torvalds
b2e3c4319d ARM: SoC driver updates
Driver updates for ARM SoCs.
 
 A handful of driver changes this time around. The larger changes are:
 
  - Reset drivers for hi3660 and zx2967
  - AHCI driver for Davinci, acked by Tejun and brought in here due to
    platform dependencies
  - Cleanups of atmel-ebi (External Bus Interface)
  - Tweaks for Rockchip GRF (General Register File) usage (kitchensink misc
    register range on the SoCs)
  - PM domains changes for support of two new ZTE SoCs (zx296718 and zx2967)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYrM7/AAoJEIwa5zzehBx3qisP/18NwvbYvC3rMza7k+TEU66n
 vuEF9KW5GhUpQPbNIsTer5qHhC7ZgL7RoR/H7mpZcCxfhYiNXuUaOv8TMGK+WTLQ
 HH6QTs4mARLh1IrRcog1hoElzzqMVxaQgODeaaG1DcPvTqHWsQurbXsf17tCQOri
 nWKyxFpLNlu0kktkGb5JWrM4XBjU9KsW7LME9H86wG8HmB6+mcT5ddeYwW5nD8cG
 txXgmMjdTEKcpbeTg3cAzL4504auhIl4R9uK+8dc1sw+e9T0nXNDS9IkmLPwWtSR
 u8q6zQ3zReoDw4jGUgPP0ILHudfQsiMdWS+P2hw/krpbtLlQ+irHDVa1VA3NLiUT
 9aG9cNTYRMo3ct22YEeWsnAC04XOxpCsqHTR+UWuZaBmf3eoMIXnsafTuwLzqKlQ
 Ent/4eFPInMAzDH8Kaf1Hh0918qkgF2bNlshem11TccQKvHP+qCoHk6mKGxwEj5k
 E1UEG4S6k6zNqjLwmTBBbk8sLMl/WVo6RMSMz+JflatgPmVZco4EX2O73iKGAJVU
 5GfHIUG9Yl4+aTIUORu59cWxOCApK0kqERrFKe412BMurXlLfqVcr/H2tiiuWnn1
 cEJ9d+uBd8IxTIQX0iEYGUAkX97mhxGUYdqGQuGJSV+MOfWX1zNP1sI4EscLGKQj
 sDDZScCaguM4xE20Jum1
 =od7u
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs.

  A handful of driver changes this time around. The larger changes are:

   - Reset drivers for hi3660 and zx2967

   - AHCI driver for Davinci, acked by Tejun and brought in here due to
     platform dependencies

   - Cleanups of atmel-ebi (External Bus Interface)

   - Tweaks for Rockchip GRF (General Register File) usage (kitchensink
     misc register range on the SoCs)

   - PM domains changes for support of two new ZTE SoCs (zx296718 and
     zx2967)"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits)
  soc: samsung: pmu: Add register defines for pad retention control
  reset: make zx2967 explicitly non-modular
  reset: core: fix reset_control_put
  soc: samsung: pm_domains: Read domain name from the new label property
  soc: samsung: pm_domains: Remove message about failed memory allocation
  soc: samsung: pm_domains: Remove unused name field
  soc: samsung: pm_domains: Use full names in subdomains registration log
  sata: ahci-da850: un-hardcode the MPY bits
  sata: ahci-da850: add a workaround for controller instability
  sata: ahci: export ahci_do_hardreset() locally
  sata: ahci-da850: implement a workaround for the softreset quirk
  sata: ahci-da850: add device tree match table
  sata: ahci-da850: get the sata clock using a connection id
  soc: samsung: pmu: Remove duplicated define for ARM_L2_OPTION register
  memory: atmel-ebi: Enable the SMC clock if specified
  soc: samsung: pmu: Remove unused and duplicated defines
  memory: atmel-ebi: Properly handle multiple reference to the same CS
  memory: atmel-ebi: Fix the test to enable generic SMC logic
  soc: samsung: pm_domains: Add new Exynos5433 compatible
  soc: samsung: pmu: Add dummy support for Exynos5433 SoC
  ...
2017-02-23 15:57:04 -08:00
Linus Torvalds
c61c15e08a ARM: 64-bit DT updates for v4.11
ARM64 DT updates are fairly small this time, only two new SoCs and a handful
 of new machines get added, all of them similar to other hardware we already
 support.
 
 New SoC:
   - HiSilicon Kirin960/Hi3660 and HiKey960 development board
   - NXP LS1012a with three reference boards
     http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/qoriq-layerscape-arm-processors/qoriq-layerscape-1012a-low-power-communication-processor:LS1012A
 
 New development board:
   - Banana Pi M64, based on Allwinner A64
     http://www.banana-pi.org/m64.html
   - SolidRun MACCHIATOBin based on Marvell Armada 8K
     https://www.solid-run.com/marvell-armada-family/armada-8040-community-board/
   - Broadcom BCM958712DxXMC NorthStar2 reference board (another one)
 
 A lot of platforms improve support for existing machines by adding
 extra devices for which a binding and driver is availabe:
 
 Allwinner: MMC, USB
 ARM Juno: Coresight, STM
 Broadcom: NS2 GICv2m irqchip and PCIe
 Marvell: Armada 3700 SPI, I2C, ethernet switch
 Mediatek: MT8173 thermal
 NXP i.MX: LS1046A thermal
 Qualcomm: coresight on MSM8916, HDMI, WCNSS, SCM
 Renesas: r8a779[56] thermal, powerdomain, ethernet, sound, pwm, can, can fd
 Rockchip: thermal, eDP, pinctrl enhancements
 Samsung: TM2 touchkey, Exynos5433 HDMI and power management improvements
 UniPhier: SD reset, eMMC controller
 ZTE: oppv2 cpufreq
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIUAwUAWK9htWCrR//JCVInAQL5sg/40ehZk89xuReYHaOoL0jkEGxt7ogae2Q0
 5SurlVNEjkr1A6KKcTKwy6c8E4GReq0ioVUxyYHlNo2MedtLQWssSvObfjt390E+
 OYXhuHHyHFgut9jF6nq1IZbSqkhaDcoRFdK0EPzjdxTMMk59xqzG2t9Kbq0MFz0I
 Fg0+xB44VAOwuM+45MjNzdpTzolkH3gxlK4TV/opbr2/9uEDCjFOLr1zqZuWqIDh
 uyXXqHYUZ54kz2GvhfYPgcm+f+PjuV2fw/Jh5u3+jNvwMQvA70Erv52im1o1a3GV
 UTjmBgccTKByrPk7gXP3lgRkHQGwPLNH0L+28AZ/BNuZbWqDrDe7uVfpq9nWb5Xl
 IR0uleNBOuiOdqR6Ya4xosGSm6AOgQhCbE52trHdUhb03eqRbqHcLHEVmZXXea/i
 EejGOciIvbV8ent9jjREw/kvGZ+Ws6v5notG4uPDwn+YZSJAyqvGh5Tul8WzZIxk
 Wr1WZgbuwkI0KYiFzSINfgDX0Om2l6YoVZLnkjst5Exto+TGRSINJpVCXsuGIU7O
 34qZD25yA8WlJTooBL0cvrW0NT2RewBqLogwhbwDnRW241SW5AnuzPsFPWldLzon
 L5sFgsF60gWiIlbB2/BKdpF2jB/+brXNR6epnQYADigweg/4+pS8HPZRFj7g8wyE
 s22+OYJ6Cg==
 =glug
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "ARM64 DT updates are fairly small this time, only two new SoCs and a
  handful of new machines get added, all of them similar to other
  hardware we already support.

  New SoC:

   - HiSilicon Kirin960/Hi3660 and HiKey960 development board

   - NXP LS1012a with three reference boards:
        http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/qoriq-layerscape-arm-processors/qoriq-layerscape-1012a-low-power-communication-processor:LS1012A

  New development board:

   - Banana Pi M64, based on Allwinner A64:
        http://www.banana-pi.org/m64.html

   - SolidRun MACCHIATOBin based on Marvell Armada 8K:
        https://www.solid-run.com/marvell-armada-family/armada-8040-community-board/

   - Broadcom BCM958712DxXMC NorthStar2 reference board (another one)

  A lot of platforms improve support for existing machines by adding
  extra devices for which a binding and driver is availabe:

  Allwinner:
   - MMC, USB

  ARM Juno:
   - Coresight, STM

  Broadcom:
   - NS2 GICv2m irqchip and PCIe

  Marvell:
   - Armada 3700 SPI, I2C, ethernet switch

  Mediatek:
   - MT8173 thermal

  NXP i.MX:
   - LS1046A thermal

  Qualcomm:
   - coresight on MSM8916, HDMI, WCNSS, SCM

  Renesas:
   - r8a779[56] thermal, powerdomain, ethernet, sound, pwm, can, can fd

  Rockchip:
   - thermal, eDP, pinctrl enhancements

  Samsung:
   - TM2 touchkey, Exynos5433 HDMI and power management improvements

  UniPhier:
   - SD reset, eMMC controller

  ZTE:
   - oppv2 cpufreq"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (110 commits)
  arm64: dts: qcom: Add msm8916 CoreSight components
  arm64: dts: marvell: adjust name of sd-mmc-gop clock in syscon
  arm64: allwinner: add BananaPi-M64 support
  arm64: allwinner: a64: add UART1 pin nodes
  arm64: allwinner: pine64: add MMC support
  arm64: allwinner: a64: Increase the MMC max frequency
  arm64: allwinner: a64: Add MMC pinctrl nodes
  arm64: allwinner: a64: Add MMC nodes
  dt-bindings: clockgen: Add compatible string for LS1012A
  Documentation: DT: add LS1012A compatible for SCFG and DCFG
  Documentation: DT: Add entry for FSL LS1012A RDB, FRDM, QDS boards
  arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci
  arm64: tegra: Use symbolic reset identifiers
  arm64: dts: r8a7796: Mark EthernetAVB device node disabled
  arm64: dts: r8a7795: Mark EthernetAVB device node disabled
  arm64: dts: r8a7795: tidyup audma definition order
  arm64: dts: r8a7796: Link ARM GIC to clock and clock domain
  arm64: dts: r8a7795: Link ARM GIC to clock and clock domain
  arm64: dts: r8a7796: Add R-Car Gen3 thermal support
  arm64: dts: r8a7795: Add R-Car Gen3 thermal support
  ...
2017-02-23 15:52:14 -08:00
Linus Torvalds
195849ea13 ARM: DT updates for v4.11
A total of 380 patches this time, mostly adding support for more hardware
 in the device tree descriptions. There is not much exciting here for 4.11,
 but I've tried my best to condense the information from the pull requests
 I got into a readable summary.
 
 Noteworthy changes to existing platforms include:
   - The GIC memory map was a bit wrong almost everywhere and now
     gets fixed up
   - The Allwinner platforms convert to the generic pinmux properties
   - The Marvell EBU platforms now use the new DSA binding
   - Samsung Exynos4212 was unused and gets removed
   - The Renesas power management got improved
 
 New production machines:
   - Lego Mindstorms EV3
     https://www.lego.com/en-us/mindstorms/about-ev3
   - Beelink X2 Android media box
     http://linux-sunxi.org/Beelink_X2
   - "Romulus" baseboard management controller for OpenPower
   - Axentia TSE-850 Data Radio Channel (DARC) encoder
     http://www.axentia.se/db/equipment.html
   - Luxul XAP-1410 and XWR-1200 wireless access points
     https://luxul.com/xap-1410
 
 New SoCs:
   - Allwinner H2+ and V3s, both minor variations of already
     supported chips
     http://www.allwinnertech.com/index.php?c=product&a=index&id=38
   - Marvell Prestera DX packet processors based on Armada XP architecture
     http://www.marvell.com/switching/prestera-dx/
   - Samsung Exynos4412 Prime gets added, a minor variation of Exynos4412
 
 New developer and reference boards:
   - Lichee Pi One, Lichee Pi Zero and Orange Pi Zero,
     all based on Allwinner SoCs
     http://linux-sunxi.org/LicheePi_One
     http://www.orangepi.org/orangepizero/
   - SAMA5d36ek Reference platform
     http://www.atmel.com/tools/sama5d36-ek.aspx
   - Beaglebone Green Wireless and Black Wireless
     https://beagleboard.org/black-wireless
     https://beagleboard.org/green-wireless
   - phyCORE-AM335x System on Module
     http://phytec.com/products/system-on-modules/phycore/am335x/
   - New revision of "vf610-zii" Zodiac Inflight Innovations board
   - Various i.MX System-on-Module: Is.IoT MX6UL, SavageBoard, Engicam i.Core
     http://www.opossom.com/english/index.html
     http://www.savageboard.org/
     http://www.engicam.com/en/products/embedded/som/sodimm/is-iot-mx6ul
     http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q
   - Liebherr (LWN) monitor 6 based on i.MX6 Quad, no idea what this is
 
 Cleanups and bugfixes on at91, bcm53xx, i.MX, mvebu, omap, oxnas, qcom,
     rockchip, sti, stm32 and tegra
 
 New device supports added to some boards and SoCs, briefly by platform:
   - Allwinner: SPDIF, A33 cpufreq, A33 Mali GPU
   - Aspeed: network, ipmi bt, gpio, pinmux
   - Broadcom: video encoder for raspberry pi, qspi, ethernet, sd/mmc
   - TI DaVinci: gpio, lcdc, usb, video-in, uart
   - TI Keystone 2: MSM RAM, power/reset, uart
   - Mediatek MT2701: clocks, iommu, spi, nand, adc, thermal
   - Marvell EBU: ethernet switch on Turris Omnia
   - NXP i.MX: otp ram, USB, wifi, bluetooth, spdif, spi, pmic,
     eeprom, mmc, nand
   - TI OMAP:
   - Qualcomm: coresight, gyro/accelerometer, hdmi
   - Renesas: pmic, soc-id
   - Rockchip: qos
   - Samsung: audio on Odroid-X
   - Socfpga: FPGA manager, i2c, led, can, watchdog, nand, power monitor
   - STi: video in/out
   - STM32: timer, pwm, i2c, rtc, add, i2s
   - NVIDIA Tegra: tpm
   - Uniphier: mmc/sd pinmux
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWK9aamCrR//JCVInAQJPpBAA2qUQYRfCgzK1fEu6X+c8pzqITqlV+Hx7
 8tBsZFINywKLnUXLs4Ip4DDK8uDsIACXSmGMdmhUVIXLsuRxJBl8av+ndd+ERGoF
 bg/iAIyA9hjKRhorE1wDyC4wg1S4P8laPevbK7NcDYDbK9MRmGSmEyP2uvhfLtVy
 2zoPfIE5aEipx6GoIATzLRqpMO6rWB/eg9OUZVKN5Hwh3LNCKtkX726GC9WGVqoE
 zslF1S6VH63dfru2Vlu5eFdvmiox54gBJBMR7yld+EIiXWilNT0eWfEYRd3CMT6E
 EwRCNiNRa21DHstBdL9pTuE+K0LpAUXlznjiqeWrZVuJfdHJy51pGVWwoc4ynbhI
 TS/GFgJI4iG2xrE3EIJS5cAl1S9WtNOYYvZATM35blFbZv7ASoAGdj2EECIIPwJr
 CR4l9Y2k/fuNHAzhR4B0fEKj/uWj7ONqcolpf8W6lZx0MvVNgeDwdx0eoLrbrxY9
 MJFb9OgD+BhNp5lIElysl0L9aEp3PxV668nSg4qV+Mo4w/5/OXhHK8675bXlITFU
 4Rw6fxRUBeO2B0LSonE4Ds8QKMQCs2yfxyMPWMn8yK/xFkwpHzwoJuRR2RYpbQTb
 5Hrnfk23k+2rflht07XBxNqqaznDQyPPvAvoB0ZZ2kchPYl75MlpAfOGlgfhXcmm
 Kp4g7VYyfAs=
 =ucQ/
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Arnd Bergmann:
 "A total of 380 patches this time, mostly adding support for more
  hardware in the device tree descriptions. There is not much exciting
  here for 4.11, but I've tried my best to condense the information from
  the pull requests I got into a readable summary.

  Noteworthy changes to existing platforms include:

   - The GIC memory map was a bit wrong almost everywhere and now gets
     fixed up

   - The Allwinner platforms convert to the generic pinmux properties

   - The Marvell EBU platforms now use the new DSA binding

   - Samsung Exynos4212 was unused and gets removed

   - The Renesas power management got improved

  New production machines:

   - Lego Mindstorms EV3:
        https://www.lego.com/en-us/mindstorms/about-ev3

   - Beelink X2 Android media box:
        http://linux-sunxi.org/Beelink_X2

   - "Romulus" baseboard management controller for OpenPower

   - Axentia TSE-850 Data Radio Channel (DARC) encoder:
        http://www.axentia.se/db/equipment.html

   - Luxul XAP-1410 and XWR-1200 wireless access points:
        https://luxul.com/xap-1410

  New SoCs:

   - Allwinner H2+ and V3s, both minor variations of already supported
     chips:
        http://www.allwinnertech.com/index.php?c=product&a=index&id=38

   - Marvell Prestera DX packet processors based on Armada XP
     architecture:
        http://www.marvell.com/switching/prestera-dx/

   - Samsung Exynos4412 Prime gets added, a minor variation of
     Exynos4412

  New developer and reference boards:

   - Lichee Pi One, Lichee Pi Zero and Orange Pi Zero, all based on
     Allwinner SoCs:
        http://linux-sunxi.org/LicheePi_One
        http://www.orangepi.org/orangepizero/

   - SAMA5d36ek Reference platform:
        http://www.atmel.com/tools/sama5d36-ek.aspx

   - Beaglebone Green Wireless and Black Wireless:
        https://beagleboard.org/black-wireless
        https://beagleboard.org/green-wireless

   - phyCORE-AM335x System on Module:
        http://phytec.com/products/system-on-modules/phycore/am335x/

   - New revision of "vf610-zii" Zodiac Inflight Innovations board

   - Various i.MX System-on-Module: Is.IoT MX6UL, SavageBoard, Engicam
     i.Core:
        http://www.opossom.com/english/index.html
        http://www.savageboard.org/
        http://www.engicam.com/en/products/embedded/som/sodimm/is-iot-mx6ul
        http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q

   - Liebherr (LWN) monitor 6 based on i.MX6 Quad, no idea what this is

   - Cleanups and bugfixes on at91, bcm53xx, i.MX, mvebu, omap, oxnas,
     qcom, rockchip, sti, stm32 and tegra

  New device supports added to some boards and SoCs, briefly by platform:

   - Allwinner: SPDIF, A33 cpufreq, A33 Mali GPU

   - Aspeed: network, ipmi bt, gpio, pinmux

   - Broadcom: video encoder for raspberry pi, qspi, ethernet, sd/mmc

   - TI DaVinci: gpio, lcdc, usb, video-in, uart

   - TI Keystone 2: MSM RAM, power/reset, uart

   - Mediatek MT2701: clocks, iommu, spi, nand, adc, thermal

   - Marvell EBU: ethernet switch on Turris Omnia

   - NXP i.MX: otp ram, USB, wifi, bluetooth, spdif, spi, pmic, eeprom,
     mmc, nand

   - TI OMAP:

   - Qualcomm: coresight, gyro/accelerometer, hdmi

   - Renesas: pmic, soc-id

   - Rockchip: qos

   - Samsung: audio on Odroid-X

   - Socfpga: FPGA manager, i2c, led, can, watchdog, nand, power monitor

   - STi: video in/out

   - STM32: timer, pwm, i2c, rtc, add, i2s

   - NVIDIA Tegra: tpm

   - Uniphier: mmc/sd pinmux"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (380 commits)
  ARM: dts: armada-385-linksys: fix DSA compatible property
  ARM: dts: Fix typo in armada-xp-98dx4251
  ARM: DTS: Fix register map for virt-capable GIC
  dt-bindings: arm,gic: Fix binding example for a virt-capable GIC
  ARM: dts: sun8i: sinlinx: Enable audio nodes
  ARM: dts: sun8i: parrot: Enable audio nodes
  ARM: dts: sun8i: Add audio codec, dai and card for A33
  ARM: dts: Add EMAC AXI settings for Arria10
  ARM: dts: am335x-chiliboard: Support charger
  ARM: dts: am335x-chiliboard: Support power button
  ARM: sun8i: dt: Add mali node
  dt-bindings: gpu: Add Mali Utgard bindings
  ARM: dts: stm32: Add I2C1 support for STM32429 eval board
  ARM: dts: stm32: Add I2C1 support for STM32F429 SoC
  ARM: dts: stm32: Use clock DT binding definition on stm32f429 family
  dt-bindings: mfd: stm32f4: Add missing binding definition
  dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro
  ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco
  ARM: dts: stm32: add Timers driver for stm32f429 MCU
  ARM: dts: add the AB8500 sysclk to the device trees
  ...
2017-02-23 15:46:25 -08:00
Linus Torvalds
6ae52c65e0 ARM: SoC platform updates
In the SoC branch we normally collect classic arch/arm/mach-* contents, i.e.
 C code changes for SoC platforms. This release cycle the diffstat is quite
 nice, in that we're removing 3x the amount of code that's being added.
 
 The main reason for this is that there's a removal of camera drivers for
 Freescale i.MX chips (driver was removed so the device registration isn't
 needed any more). There's also removal of display initialization code for OMAP
 that is no longer needed.
 
 The rest are mostly minor tweaks and cleanups; constification on Samsung
 platforms, cleanup of ux500 platform data, purge of other unused platform
 data/device seutp on i.MX and other good stuff.
 
 New SoC support this cycle is for two Allwinner platforms, H2+ and V3s.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYrMs4AAoJEIwa5zzehBx34LQP/j/pzJOw2cLr0iiHwNl/3jyC
 XFt/F6NFfPuBOCldUoMsZzD2lOR1Qbhp96fAQtDzs/HkGRVxokcHRVJC1QWozSkt
 18wm8tc4HtLvjWoeXyh3zFvwl4wiqx4d4r4yxw1wZKA0uhEXrSNJu4P/RgtXH4SK
 TycfodE35kJ8wCxLNXYr1vaAMKgjmBkk8DAQa5t6XXBnSLGJmNAa5+vCJKab1im+
 9mOZ1EigtrkRR6eL6OJmru3MaZYLg7q+oxq5i/5NOIOZsCWq6Wk4r+5HnTg+8aVf
 QVs766sEjwZJ5ozZYhYucp8pvQhyatG36vwB51x1XlTA4XzAJwMEgPAtb5Pc/owU
 cst8d4m24Gc7oChcxlbmrqK64hpF1s5LK/ZbfdLPHaK1PS/ng/teHfVA2Q2HXwur
 HcHA8dDqgTVCNcCpLX1OgBUbq9S0aopuL9bdeg6q6fU8Skb49BmeHK2Iji3MZSkO
 8XdY8H7oKtkwLFx18GJzmdXtH55vIXpHYMvgpjMaWAujtoqZCZ7+GHCmM3GyNCrF
 +KzJMVdx1lg6yYhfo4rZBWGzK2CrHvq5u5Vq7GExxhVCPsOx3mRQQ0JY/adGWU/y
 WTCbogwxUNbjlugffwQa+dYdF2KU2kAHAyEFDITndZmp60xJohWPYVJw+7imF5wR
 0Qbcj6OvffBcaTdxKzTE
 =YE8v
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "In the SoC branch we normally collect classic arch/arm/mach-*
  contents, i.e. C code changes for SoC platforms. This release cycle
  the diffstat is quite nice, in that we're removing 3x the amount of
  code that's being added.

  The main reason for this is that there's a removal of camera drivers
  for Freescale i.MX chips (driver was removed so the device
  registration isn't needed any more). There's also removal of display
  initialization code for OMAP that is no longer needed.

  The rest are mostly minor tweaks and cleanups; constification on
  Samsung platforms, cleanup of ux500 platform data, purge of other
  unused platform data/device seutp on i.MX and other good stuff.

  New SoC support this cycle is for two Allwinner platforms, H2+ and
  V3s"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits)
  ARM: ux500: remove deleted file from Makefile
  ARM: ep93xx: Disable TS-72xx watchdog before uncompressing
  ARM: ux500: cut some platform data
  MAINTAINERS: Update for the current location of the bcm2835 tree.
  ARM: davinci: remove BUG_ON() from da850_register_sata()
  ARM: davinci: da850: model the SATA refclk
  ARM: davinci: da850: add con_id for the SATA clock
  ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA
  arm: mvebu: support for SMP on 98DX3336 SoC
  dt-bindings: video: exynos7-decon: Remove obsolete samsung,power-domain property
  soc: dove: constify reset_control_ops structures
  ARM: mv78xx0: fix possible PCI buffer overflow
  MAINTAINERS: transfer maintainership for the EZX platform
  ARM: shmobile: rcar-gen2: Add more register documentation
  ARM: tegra: paz00: Fix __initdata placement
  ARM: OMAP: clock: Remove unused mpurate cmdline option
  ARM: davinci: add skeleton for pdata-quirks
  arm: sunxi: add support for V3s SoC
  ARM: OMAP2+: omap_hwmod: Add support for earlycon
  arm: hisi: drop extern hip01_cpu_die
  ...
2017-02-23 15:33:54 -08:00
Dave Airlie
894ebc414d drm/panel: Changes for v4.11-rc1
This set contains a couple of cleanups as well as support for a few more
 simple panels.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlivHekTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zofTfEACk2GdNP2ZNfXmPGkTmgnFRghWDa64J
 7j+SMI/5D/6B/xR7obgj1vjEEnLEeY515IXxA+l04QRndsm2X3HGo3GwhrrkAfAl
 HDZR4UuXxyEWJz2G4eMrqwMril0LwUlMSXkelWR9hleFGeL9PZjt9XnRYFXgBEFA
 nyvC7VQIN5yz/d6rzRLUuWwnDrcnV4sRHssMucyht4xk8SAnSjAvJhJ6/5PQMkSL
 aMLOUcFMfhew66EEIZrA402NZlCGGM2OnRGD0qBoH45T2Wipxw2oR6jVwROgDgRS
 O5nKOLM+zktcdfmPJsP4PV3Z5oyhhilPTlGWEnIVEcBtWHS1hZbExgX7TqWgaqVD
 Il7Wnjiar8Yy7XpVdjyZtztvanNkHP+HW4BoHkhvMLiJIwMJ5y+VCBlZ6d02LQpZ
 qdCE2NCjLDmV5ro5FujWk/bdCx+YDwqVxhluiYYzMdweRTgmRE2On0zGVJciSUeX
 2CQhKau4lOJUjbEu+T5qLQgfXUhiUKFcI997x6elf74iwTncj22TCbRDshN7nct2
 HkBJviuLW1SqsZ0eZ+N4GaFr14INRVeFm21dwAU/VVkN95GKm1IOILs4ZruvT6WM
 iLJRQ9a2CGoJYLPYBfCETACm3CiwJZeeIMc581iC+wOWL2YjQpC0iooXmq6RChF0
 waAtb9/cQlHYgQ==
 =vKBu
 -----END PGP SIGNATURE-----

Merge tag 'drm/panel/for-4.11-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/panel: Changes for v4.11-rc1

This set contains a couple of cleanups as well as support for a few more
simple panels.

* tag 'drm/panel/for-4.11-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/panel: simple: Specify bus width and flags for EDT displays
  drm/panel: simple: Add Netron DY E231732
  of: Add vendor prefix for Netron DY
  drm/panel: simple: Add support for Tianma TM070JDHG30
  of: Add vendor prefix for Tianma Micro-electronics
  drm/panel: simple: Add support BOE NV101WXMN51
  dt-bindings: display: Add BOE NV101WXMN51 panel binding
  drm/panel: Constify device node argument to of_drm_find_panel()
2017-02-24 08:29:03 +10:00
Linus Torvalds
60e8d3e116 pci-v4.11-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYrvYlAAoJEFmIoMA60/r8FuQQAMDpia3kacyCAJpa+zjmyMNF
 1slytaoIvP37dFq9XF1em031lwGNr5sahZ7nP1EKgALz4odZUzait7BUABcfviIn
 Uesz2E1s/miMo4/0X1j9DqY9xV649DmmSIgk1yn3kvCkH/+Ix27dexu47auGzPEb
 H/sEfd1RZidjZ5EWaG0ww5FrHcuge+JHtcH6vFQtWsTOspcx++IhaVIGjC0JCpqK
 DnlQKilsJ38KUkvuDcxWjtFKxAc8De9jvCR4kX96OvbHahfAWwBO4AtUv7U3JpJN
 2nyQk+I5kRagbfBucaXZISUtWM7h4peLiL+TGkvKg8eOVlOCedjYlrZW4SWkbAN+
 0qwcHRQ8lwhNmgp3VYq7pmnugIvW4P2Fh3uqaplCAIwlpODxWPDQP7HLM2kyzmvq
 gPGi0R4Yo2PdIXqfbilrzbFVeyqkIFECr287a6+5PekC0DxsqZvOG0uA1mWKLIaH
 pRQMT0FO2SCCSOpcxRExeIj+XxhXlDVOrIBP6eMiFXAMgzUAyU8fLSZVMtXAvsTS
 02hVDOc/Fq2jKlCSoJRIiRp5aj1QDFS/DjBhOnW7pXuvUTCrfYBXY5NCdT9UV3Q7
 W6qHWkizRmRDGxUzqSODRt5aU7VOKbWvZnp10eJyKt5s2Iawe6We5V1NX+u18UIS
 Scc1nbuPTL6u1n8PsaBG
 =4Owc
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - add ASPM L1 substate support

 - enable PCIe Extended Tags when supported

 - configure PCIe MPS settings on iProc, Versatile, X-Gene, and Xilinx

 - increase VPD access timeout

 - add ACS quirks for Intel Union Point, Qualcomm QDF2400 and QDF2432

 - use new pci_irq_alloc_vectors() in more drivers

 - fix MSI affinity memory leak

 - remove unused MSI interfaces and update documentation

 - remove unused AER .link_reset() callback

 - avoid pci_lock / p->pi_lock deadlock seen with perf

 - serialize sysfs enable/disable num_vfs operations

 - move DesignWare IP from drivers/pci/host/ to drivers/pci/dwc/ and
   refactor so we can support both hosts and endpoints

 - add DT ECAM-like support for HiSilicon Hip06/Hip07 controllers

 - add Rockchip system power management support

 - add Thunder-X cn81xx and cn83xx support

 - add Exynos 5440 PCIe PHY support

* tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (93 commits)
  PCI: dwc: Remove dependency of designware on CONFIG_PCI
  PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host
  PCI: dwc: Split pcie-designware.c into host and core files
  PCI: dwc: designware: Fix style errors in pcie-designware.c
  PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc()
  PCI: dwc: all: Split struct pcie_port into host-only and core structures
  PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init()
  PCI: dwc: all: Rename cfg_read/cfg_write to read/write
  PCI: dwc: all: Use platform_set_drvdata() to save private data
  PCI: dwc: designware: Move register defines to designware header file
  PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code
  PCI: dra7xx: Group PHY API invocations
  PCI: dra7xx: Enable MSI and legacy interrupts simultaneously
  PCI: dra7xx: Add support to force RC to work in GEN1 mode
  PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional()
  PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory
  PCI: exynos: Support the PHY generic framework
  Documentation: binding: Modify the exynos5440 PCIe binding
  phy: phy-exynos-pcie: Add support for Exynos PCIe PHY
  Documentation: samsung-phy: Add exynos-pcie-phy binding
  ...
2017-02-23 11:53:22 -08:00
Linus Torvalds
5bcbe22ca4 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
 "API:
   - Try to catch hash output overrun in testmgr
   - Introduce walksize attribute for batched walking
   - Make crypto_xor() and crypto_inc() alignment agnostic

  Algorithms:
   - Add time-invariant AES algorithm
   - Add standalone CBCMAC algorithm

  Drivers:
   - Add NEON acclerated chacha20 on ARM/ARM64
   - Expose AES-CTR as synchronous skcipher on ARM64
   - Add scalar AES implementation on ARM64
   - Improve scalar AES implementation on ARM
   - Improve NEON AES implementation on ARM/ARM64
   - Merge CRC32 and PMULL instruction based drivers on ARM64
   - Add NEON acclerated CBCMAC/CMAC/XCBC AES on ARM64
   - Add IPsec AUTHENC implementation in atmel
   - Add Support for Octeon-tx CPT Engine
   - Add Broadcom SPU driver
   - Add MediaTek driver"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (142 commits)
  crypto: xts - Add ECB dependency
  crypto: cavium - switch to pci_alloc_irq_vectors
  crypto: cavium - switch to pci_alloc_irq_vectors
  crypto: cavium - remove dead MSI-X related define
  crypto: brcm - Avoid double free in ahash_finup()
  crypto: cavium - fix Kconfig dependencies
  crypto: cavium - cpt_bind_vq_to_grp could return an error code
  crypto: doc - fix typo
  hwrng: omap - update Kconfig help description
  crypto: ccm - drop unnecessary minimum 32-bit alignment
  crypto: ccm - honour alignmask of subordinate MAC cipher
  crypto: caam - fix state buffer DMA (un)mapping
  crypto: caam - abstract ahash request double buffering
  crypto: caam - fix error path for ctx_dma mapping failure
  crypto: caam - fix DMA API leaks for multiple setkey() calls
  crypto: caam - don't dma_map key for hash algorithms
  crypto: caam - use dma_map_sg() return code
  crypto: caam - replace sg_count() with sg_nents_for_len()
  crypto: caam - check sg_count() return value
  crypto: caam - fix HW S/G in ablkcipher_giv_edesc_alloc()
  ..
2017-02-23 09:54:19 -08:00
Linus Torvalds
a3919caaa2 remoteproc updates for v4.11
This introduces support for booting the dedicated sensor core in the
 Qualcomm MSM8996, updates the Qualcomm ADSP and Hexagon drivers to
 utilize SMD subdevice helpers for properly handle shutdowns and restarts
 of the remoteproc, add virtio support to the ST remoteproc and refactor
 the Qualcomm Hexagon driver to handle variations between platforms.
 
 The support code for parsing, loading and authenticating Qualcomm
 firmware files (MDT) is refactored and move to drivers/soc/qcom, to
 allow for non-remoteproc drivers to utilize this.
 
 Finally it brings some cleanups to the remoteproc core.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYrem5AAoJEAsfOT8Nma3FUD0QALlYbOa4xzG6m5V8mMY1TeGD
 1nSF7pntk81wKLiNbEduXp6hTu35NZb0j8lOStmF6A4yIp5GKzKWgRWknWm56N2y
 IfF/3ED3TcbMHeHbs9GewyXH8l3VspeqFXqQmykLbRBWywjbIq0V1NZOrNCooHrq
 9atQ5LGtB+doqkIj7cKoaM9V+gVx5FPL8w6ZtVMWfbMzNZEoKBpMJSvWus+UVPbF
 riizz4DD/+YqNNw9Tud4zNi+bTT+d29DMNOmjbH81vb0nsrcrj7wyR7ib/ECjmSA
 XVEItWJGtWtQyZpgWfP+DU/ZcdjnwwUZOPiRsCyRmbtrhphwk9C8Lc/PuaNrobqx
 hjfCP//f+B7XVNBmkWgmkRQh4XTllkgXo/dMn3FsRwxtvtBJ9mtyCIS/cZJjPcXK
 5r7PxOGKDyzX640mRsIBVDCtiSRqIZ7/XiRvE5s/X1q2NPEfotLFo50ZgdddaxPa
 kiqAF9G9h+4mQyYhmk4+SPyL4hYCFa8FAQkK7K01fLgQPVI0J4hm1JBm7AMBpDhK
 k6xyPOpPOaTKTja9WGFde4gtjlLvIE2weBB+02vXL7n7/M8w8j0bDXUKyFx98Ejj
 sKPGvQXtCndSNagM1EnkgZm3xbPyWPvgtD2VUvsZAlr3Td/N0qhEl4o7nLsK3ypU
 ihiSLKhF+V5ReeKljI3z
 =vAKB
 -----END PGP SIGNATURE-----

Merge tag 'rproc-v4.11' of git://github.com/andersson/remoteproc

Pull remoteproc updates from Bjorn Andersson:
 "This introduces support for booting the dedicated sensor core in the
  Qualcomm MSM8996, updates the Qualcomm ADSP and Hexagon drivers to
  utilize SMD subdevice helpers for properly handle shutdowns and
  restarts of the remoteproc, add virtio support to the ST remoteproc
  and refactor the Qualcomm Hexagon driver to handle variations between
  platforms.

  The support code for parsing, loading and authenticating Qualcomm
  firmware files (MDT) is refactored and move to drivers/soc/qcom, to
  allow for non-remoteproc drivers to utilize this.

  Finally it brings some cleanups to the remoteproc core"

* tag 'rproc-v4.11' of git://github.com/andersson/remoteproc: (27 commits)
  remoteproc: qcom: mdt_loader: Use signed type for offset
  remoteproc: st: add virtio communication support
  remoteproc: st: correct probe error management
  remoteproc: Modify the function names
  remoteproc: Reduce asynchronous request_firmware to auto-boot only
  remoteproc: Drop qcom_scm_pas_supported() from adsp_probe()
  MAINTAINERS: Add missing rpmsg include path
  remoteproc: qcom: Use common SMD edge handler
  remoteproc: qcom: wcnss: Make SMD handling common
  remoteproc: Move qcom_mdt_loader into drivers/soc/qcom
  remoteproc: qcom: mdt_loader: Refactor MDT loader
  remoteproc: qcom: mdt_loader: Don't overwrite firmware object
  remoteproc: qcom: Extract non-mdt related helper
  remoteproc: qcom: q6v5: Decouple driver from MDT loader
  remoteproc: qcom: q6v5: Remove mss supply from 8916
  remoteproc: qcom: fix initializers for qcom_mss_reg_res array
  remoteproc: Drop firmware_loading_complete
  remoteproc: Add RPROC_DELETED state
  remoteproc: Move rproc_delete_debug_dir() to rproc_del()
  remoteproc: qcom: Add SLPI rproc support to load and boot slpi proc.
  ...
2017-02-23 09:38:10 -08:00
Linus Torvalds
28cbc335d2 sound updates for 4.11-rc1
here is the update of sound bits for 4.11: again at this time, no big
 changes in ALSA and ASoC core but only cosmetic changes like
 consitifaction.  Meanwhile, quite a lot of developments are seen in
 a few driver side.
 
 ALSA Core:
 - Clean up, consitification of some ops
 
 HD-audio:
 - A slight behavior change of single_cmd option
 - Quirks for AmigaOne X1000, Samsung Ativ Book 8, Dell AiO, ALC221 HP,
   and fixes for Lewisburg controller
 - Realtek ALC299, ALC1220 codecs
 
 Others:
 - USB-audio: Tascam US-16x08 DSP mixer quirk
 - Intel HDMI LPE audio support for Baytrail / Cherrytrail; this
   contains some updates in drm/i915 for the new platform binding
 
 ASoC:
 - Lots of updates in Intel drivers, mostly for DisplayPort and HDMI
   on Skylake and onwards, as well as more Baytrail / Cherrytrail
   boards support
 - Channel mapping support for HDMI
 - Support for AllWinner A31 and A33, Everest Semiconductor ES8328,
   Nuvoton NAU8540.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEECxfAB4MH3rD5mfB6bDGAVD0pKaQFAlivCQkOHHRpd2FpQHN1
 c2UuZGUACgkQbDGAVD0pKaTA9xAAgMpLZ7K7vBRlPKQAObPLf7ufciA5gDj+L6Lt
 5octKSAql5uuqU06nHyQd5BLXYmGj5Qe7+/fkfWJYNeOwUkHroi/G44DbGNIEG8s
 sXXStcEkOKdZw30G/fzMoDgoggqjWy6gAFgtSjhPkHwfnbmF1nFmeUJ9/so7y/Oc
 Q0l4Pdsg5t4fTZcejZyLHBLdFJ2EhsYWVoJpa1Wqrv2eChMvKq1s59i0EW0Gyw4u
 kHe/COcbMIHf0yZKEcxlsN6BsAe7ik7/mGZYozL05+9HfaOIdJfU7oqJmQyPV2hm
 BVDHVmhi9rMTJ//9WA4lOa8wwpojumoM2AMbzQGczBmGjQU1KguI2rS5FhGipz4c
 mYpAnEESpB19//pKdEK8oBNPldfZyCuyTOBFVAPFp8TpHvaJEoNOyEg1UAn1crpE
 f77OMok6/6DuOcapr76TxSHwg2ewWjsxRi8NrOUML/1uxaKTplSP1AsXBLCExQi1
 YnHn4H0wZOlOfX/jfodBDW0n6+V8kyZuv/jXMEqBWsIVIHk5UUAlDJ9AR+5K3D9e
 pRDRRww7480byY5h2aXBJbI8JjePuYwhJQxbYfsz55QU5rvTBcQAAfN11wXmWGol
 wSKvDyYgR/Zw1c93+HLcNv9+Ff6Wl9sIJFXwufzYOo3hKIrVUbXHeV8GT0io39zv
 IwJoaTI=
 =1cdN
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "Here is the update of sound bits for 4.11: again at this time, no big
  changes in ALSA and ASoC core but only cosmetic changes like
  consitifaction.

  Meanwhile, quite a lot of developments are seen in a few driver side.

  ALSA Core:
   - Clean up, consitification of some ops

  HD-audio:
   - A slight behavior change of single_cmd option
   - Quirks for AmigaOne X1000, Samsung Ativ Book 8, Dell AiO, ALC221
     HP, and fixes for Lewisburg controller
   - Realtek ALC299, ALC1220 codecs

  Others:
   - USB-audio: Tascam US-16x08 DSP mixer quirk
   - Intel HDMI LPE audio support for Baytrail / Cherrytrail; this
     contains some updates in drm/i915 for the new platform binding

  ASoC:
   - Lots of updates in Intel drivers, mostly for DisplayPort and HDMI
     on Skylake and onwards, as well as more Baytrail / Cherrytrail
     boards support
   - Channel mapping support for HDMI
   - Support for AllWinner A31 and A33, Everest Semiconductor ES8328,
     Nuvoton NAU8540.

* tag 'sound-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (323 commits)
  ALSA: usb-audio: Tidy up mixer_us16x08.c
  ALSA: usb-audio: Fix memory leak and corruption in mixer_us16x08.c
  ALSA: usb-audio: purge needless variable length array
  ALSA: x86: hdmi: select CONFIG_SND_PCM
  ALSA: x86: Don't enable runtime PM as default
  ALSA: x86: Use runtime PM autosuspend
  ALSA: usb-audio: localize function without external linkage
  ALSA: usb-audio: localize one-referrer variable
  ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk
  ALSA: emu10k1: constify snd_emux_operators structure
  ASoC: sun4i-spdif: drop unnessary snd_soc_unregister_component()
  ASoC: Intel: bxt: Add jack port initialize in bxt_rt298 machine
  ASoC: nau8825: automatic BCLK and LRC divde in master mode
  ASoC: hdac_hdmi: Add device id for Geminilake
  ASoC: Intel: Skylake: Add Geminlake IDs
  ASoC: rt298: Add DMI match for Geminilake reference platform
  ASoC: Intel: Skylake: Check device type to get endpoint configuration
  ASoC: Intel: bxt: Add jack port initialize in da7219_max98357a machine
  ASoC: Intel: Skylake: Add jack port initialize in nau88l25_ssm4567 machine
  ASoC: Intel: Skylake: Add jack port initialize in nau88l25_max98357a machine
  ...
2017-02-23 08:50:22 -08:00
Linus Torvalds
1ec5c1867a This is the bulk of GPIO changes for the v4.11 cycle
Core changes:
 
 - Augment fwnode_get_named_gpiod() to configure the GPIO pin
   immediately after requesting it like all other APIs do.
   This is a treewide change also updating all users.
 
 - Pass a GPIO label down to gpiod_request() from
   fwnode_get_named_gpiod(). This makes debugfs and the userspace
   ABI correctly reflect the current in-kernel consumer of a pin
   taken using this abstraction. This is a treewide change also
   updating all users.
 
 - Rename devm_get_gpiod_from_child() to
   devm_fwnode_get_gpiod_from_child() to reflect the fact that this
   function is operating on a fwnode object. This is a treewide
   change also updating all users.
 
 - Make it possible to take multiple GPIOs in a single hog of device
   tree hogs.
 
 - The refactorings switching GPIO chips to use the .set_config()
   callback using standard pin control properties and providing
   a backend into the pin control subsystem that were also merged
   into the pin control tree naturally appear here too.
 
 Testing instrumentation:
 
 - A whole slew of cleanups and improvements to the mockup GPIO
   driver. We now have an extended userspace test exercising the
   subsystem, and we can inject interrupts etc from userspace
   to fully test the core GPIO functionality.
 
 New drivers:
 
 - New driver for the Cortina Systems Gemini GPIO controller.
 
 - New driver for the Exar XR17V352/354/358 chips.
 
 - New driver for the ACCES PCI-IDIO-16 PCI GPIO card.
 
 Driver changes:
 
 - RCAR: set the irqchip parent device, add fine-grained runtime
   PM support.
 
 - pca953x: support optional RESET control line on the chip.
 
 - DaVinci: cleanups and simplifications. Add support for multiple
   instances.
 
 - .set_multiple() and naming of lines on more or less all of the
   ISA/PCI GPIO controllers.
 
 - mcp23s08: refactored to use regmap as a first step to further
   rewrites and modernizations.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJYrqvqAAoJEEEQszewGV1zoHsP/i1iZBEywR9+yIx/p2/F2mJu
 nriuYFlp0V3FjHQAQ//YCA9+Catri+ZqT5l+BmG/EYdqqikHbziTyS0YArlfrMHv
 OOBfDmfftexvRI/jQAl+X/nIW531ZjYo6ZApFy/2TirTwfkI7DIMi6ujm09fcG5D
 BgCT1KuszbVtyrmhrQvbeEdVKw0qLAgwnn5eOOCQE4KuDB3s7eyal0rJaDEXhpMF
 kH/y6eySs4FChEhAEmCkM6205F5T4c2YFjL1bo5Fkh/WPrVPaKI0Ny16qbaDWU9K
 W9RaJUzf92KIW0MgcRl+r8Lxn+GekN6/jvrxddQ/Ajs/Dkh5r2JCrm7RIC9tBPcJ
 VbLfjL+cMehlSEu9eyxRQcAIeuUYCqkN8ghuVoj9xt/tDtNYsQIcJZtfW1yjmONq
 mFsd5KhfBFgspQkwF4IX3hthaqj8MH4zefQdWzAGPZMGEA1rrx2kVSEdZD3EV4VN
 84qt5Cx9hLllafthJOGjEIZFCjPIpbMRwTQ+fmc+1IB1DgN8Kc5E1FMssKbUEoOK
 2eLquLvd7iNDMidTjoi87YAisW9qnrPeRDywsqeXdQf7fzpB97gX4MQfJ5fJWEYr
 3uHCfu2u4J4cff9ygg8c4ut7ePEjz+ld/sBh9EHicbbryR4I5ZG7Ne1aQhsmb2M5
 dHZSRfQYEQ4Nl7cMJQuh
 =O81I
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.11 cycle

  Core changes:

   - Augment fwnode_get_named_gpiod() to configure the GPIO pin
     immediately after requesting it like all other APIs do. This is a
     treewide change also updating all users.

   - Pass a GPIO label down to gpiod_request() from
     fwnode_get_named_gpiod(). This makes debugfs and the userspace ABI
     correctly reflect the current in-kernel consumer of a pin taken
     using this abstraction. This is a treewide change also updating all
     users.

   - Rename devm_get_gpiod_from_child() to
     devm_fwnode_get_gpiod_from_child() to reflect the fact that this
     function is operating on a fwnode object. This is a treewide change
     also updating all users.

   - Make it possible to take multiple GPIOs in a single hog of device
     tree hogs.

   - The refactorings switching GPIO chips to use the .set_config()
     callback using standard pin control properties and providing a
     backend into the pin control subsystem that were also merged into
     the pin control tree naturally appear here too.

  Testing instrumentation:

   - A whole slew of cleanups and improvements to the mockup GPIO
     driver. We now have an extended userspace test exercising the
     subsystem, and we can inject interrupts etc from userspace to fully
     test the core GPIO functionality.

  New drivers:

   - New driver for the Cortina Systems Gemini GPIO controller.

   - New driver for the Exar XR17V352/354/358 chips.

   - New driver for the ACCES PCI-IDIO-16 PCI GPIO card.

  Driver changes:

   - RCAR: set the irqchip parent device, add fine-grained runtime PM
     support.

   - pca953x: support optional RESET control line on the chip.

   - DaVinci: cleanups and simplifications. Add support for multiple
     instances.

   - .set_multiple() and naming of lines on more or less all of the
     ISA/PCI GPIO controllers.

   - mcp23s08: refactored to use regmap as a first step to further
     rewrites and modernizations"

* tag 'gpio-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (61 commits)
  gpio: reintroduce devm_get_gpiod_from_child()
  gpio: pci-idio-16: Fix PCI BAR index
  gpio: pci-idio-16: Fix PCI device ID code
  gpio: mockup: implement event injecting over debugfs
  gpio: mockup: add a dummy irqchip
  gpio: mockup: implement naming the lines
  gpio: mockup: code shrink
  gpio: mockup: readability tweaks
  gpio: Add GPIO support for the ACCES PCI-IDIO-16
  gpio: Add the devm_fwnode_get_index_gpiod_from_child() helper
  gpio: Rename devm_get_gpiod_from_child()
  gpio: mcp23s08: Select REGMAP/REGMAP_I2C to fix build error
  gpio: ws16c48: Add support for GPIO names
  gpio: gpio-mm: Add support for GPIO names
  gpio: 104-idio-16: Add support for GPIO names
  gpio: 104-idi-48: Add support for GPIO names
  gpio: 104-dio-48e: Add support for GPIO names
  gpio: ws16c48: Remove unnecessary driver_data set
  gpio: gpio-mm: Remove unnecessary driver_data set
  gpio: 104-idio-16: Remove unnecessary driver_data set
  ...
2017-02-23 08:46:04 -08:00
Linus Torvalds
d5dee39b27 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry:

 - a new driver for Zeitech touchscreen controller

 - a new driver for Samsung "touchkeys"

 - touchscreen driver for Moorestown platform has been removed because
   platform support is gone

 - MPU3050 accelerometer driver was removed in favor of IIO driver

 - miscellaneous driver cleanup and fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (88 commits)
  Input: zet6223 - export OF device ID as module aliases
  Input: tsc2004/5 - switch to using generic device properties
  Input: tsc2004/5 - fix regulator handling
  Input: tsc2005 - add OF device table
  Input: add driver for Zeitec ZET6223
  Input: joydev - do not report stale values on first open
  Input: synaptics-rmi4 - forward upper mechanical buttons to PS/2 guest
  Input: synaptics-rmi4 - clean up F30 implementation
  Input: synaptics - use SERIO_OOB_DATA to handle trackstick buttons
  Input: psmouse - add a custom serio protocol to send extra information
  Input: synaptics-rmi4 - fix error return code in rmi_probe_interrupts()
  Input: xpad - restore LED state after device resume
  Input: synaptics-rmi4 - add rmi_find_function()
  Input: xpad - fix stuck mode button on Xbox One S pad
  Input: joydev - use clamp() macro
  Input: refuse to register absolute devices without absinfo
  Input: synaptics-rmi4 - add sysfs interfaces for hardware IDs
  Input: synaptics-rmi4 - add sysfs attribute update_fw_status
  Input: mousedev - stop offering PS/2 to userspace by default
  Input: tca8418 - switch to using generic device properties
  ...
2017-02-23 08:39:40 -08:00
Linus Torvalds
df9cdc1727 - Core Frameworks
- Add new !TOUCHSCREEN_SUN4I dependency for SUN4I_GPADC
    - List include/dt-bindings/mfd/* to files supported in MAINTAINERS
 
  - New Drivers
    - Intel Apollo Lake SPI NOR
    - ST STM32 Timers (Advanced, Basic and PWM)
    - Motorola 6556002 CPCAP (PMIC)
 
  - New Device Support
    - Add support for AXP221 to axp20x
    - Add support for Intel Gemini Lake to intel-lpss-pci
    - Add support for MT6323 LED to mt6397-core
    - Add support for COMe-bBD#, COMe-bSL6, COMe-bKL6,
                      COMe-cAL6 and COMe-cKL6 to kempld-core
 
  - New Functionality
    - Add support for Analog CODAC to sun6i-prcm
    - Add support for Watchdog to lpc_ich
 
  - Fix-ups
    - Error handling improvements; axp288_charger, axp20x, ab8500-sysctrl
    - Adapt platform data handling; axp20x
    - IRQ handling improvements; arizona, axp20x
    - Remove superfluous code; arizona, axp20x, lpc_ich
    - Trivial coding style/spelling fixes; axp20x, abx500, mfd.txt
    - Regmap fix-ups; axp20x
    - DT changes; mfd.txt, aspeed-lpc, aspeed-gfx, ab8500-core, tps65912, mt6397
    - Use new I2C probing mechanism; max77686
    - Constification; rk808
 
  - Bug Fixes
    - Stop data transfer whilst suspended; cros_ec
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJYrYwQAAoJEFGvii+H/HdhVMMP/3Y5/S1y7bCRhsta3PQVHT/2
 +nxu833451qTTUKNqR5rTQrjdjVLr6+rfhMmMxIDhHMrn3EvwT0bQDQmncLLYgc2
 u5n2j93Y/nfyJvy76W3aTlisBaKfxhFBuLBEkewXNwPaZk97tbgf9IbyNq6eirHo
 afv5Z54q9RN+OlT5ZfM8mJcOQAdyE6CXzq/GKZI6LjSqPb5vQhasqoD/yb9pMMga
 jYseI47KlIVLhUnnAjxRdxt16rjtee2JHZmGCGJaeo+nWiTwDOZ5l5eZDHKwD6ng
 3CW4xWDPbzeLD22oi6Uzvhx+8Eqt9S/K1AY+kn3W6WLk/CTi5yamMHw0DjBUcS9a
 hqdqGZrCSveRQrSCt/9N5uzSMkiUHFMGdj5LtX3yB4fDp0R42WJGMxkvidKb7otB
 wJIT0i5T5M5G3IT3xPkdEtfEAK3xoAus+IF0faFNaD7GqsEs97KD+740nTgulSKz
 g28Lo6NLpZhl+uQ74fx76Wll+Onj1voWABZW8Z//kjRWkAwKU8OhbXrX8kccGY6m
 C980wWtj0979jYFstwUuSXspjuvk9L1nfSuLBmtawm9S58TUIS/WLe2A8kU9/XEY
 e3PLpO4AxvCJvBBa80yVFG15JoaTX5TOg/F3NqKYaHqA2cusOVOEFAeOAdwav2rL
 SR2Y8s8ceIL4n9ccmr0b
 =P5Dp
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Add new !TOUCHSCREEN_SUN4I dependency for SUN4I_GPADC
   - List include/dt-bindings/mfd/* to files supported in MAINTAINERS

  New Drivers:
   - Intel Apollo Lake SPI NOR
   - ST STM32 Timers (Advanced, Basic and PWM)
   - Motorola 6556002 CPCAP (PMIC)

  New Device Support:
   - Add support for AXP221 to axp20x
   - Add support for Intel Gemini Lake to intel-lpss-pci
   - Add support for MT6323 LED to mt6397-core
   - Add support for COMe-bBD#, COMe-bSL6, COMe-bKL6, COMe-cAL6 and
     COMe-cKL6 to kempld-core

  New Functionality:
   - Add support for Analog CODAC to sun6i-prcm
   - Add support for Watchdog to lpc_ich

  Fix-ups:
   - Error handling improvements; axp288_charger, axp20x, ab8500-sysctrl
   - Adapt platform data handling; axp20x
   - IRQ handling improvements; arizona, axp20x
   - Remove superfluous code; arizona, axp20x, lpc_ich
   - Trivial coding style/spelling fixes; axp20x, abx500, mfd.txt
   - Regmap fix-ups; axp20x
   - DT changes; mfd.txt, aspeed-lpc, aspeed-gfx, ab8500-core, tps65912,
     mt6397
   - Use new I2C probing mechanism; max77686
   - Constification; rk808

  Bug Fixes:
   - Stop data transfer whilst suspended; cros_ec"

* tag 'mfd-for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (43 commits)
  mfd: lpc_ich: Enable watchdog on Intel Apollo Lake PCH
  mfd: lpc_ich: Remove useless comments in core part
  mfd: Add support for several boards to Kontron PLD driver
  mfd: constify regmap_irq_chip structures
  MAINTAINERS: Add include/dt-bindings/mfd to MFD entry
  mfd: cpcap: Add minimal support
  mfd: mt6397: Add MT6323 LED support into MT6397 driver
  Documentation: devicetree: Add LED subnode binding for MT6323 PMIC
  mfd: tps65912: Export OF device ID table as module aliases
  mfd: ab8500-core: Rename clock device and compatible
  mfd: cros_ec: Send correct suspend/resume event to EC
  mfd: max77686: Remove I2C device ID table
  mfd: max77686: Use the struct i2c_driver .probe_new instead of .probe
  mfd: max77686: Use of_device_get_match_data() helper
  mfd: max77686: Don't attempt to get i2c_device_id .data
  mfd: ab8500-sysctrl: Handle probe deferral
  mfd: intel-lpss: Add Intel Gemini Lake PCI IDs
  mfd: axp20x: Fix AXP806 access errors on cold boot
  mfd: cros_ec: Send suspend state notification to EC
  mfd: cros_ec: Prevent data transfer while device is suspended
  ...
2017-02-23 08:18:01 -08:00
Linus Torvalds
be5165a51d DeviceTree updates for 4.11:
- Sync dtc to upstream commit 0931cea3ba20. This picks up overlay
   support in dtc.
 
 - Set dma_ops for reserved memory users.
 
 - Make references to IOMMU consistent in DT bindings.
 
 - Cleanup references to pm_power_off in bindings.
 
 - Move some display bindings that snuck into the old bindings/video/
   path.
 
 - Fix some wrong documentation paths caused from binding restructuring.
 
 - Vendor prefixes for Faraday and Fujitsu.
 
 - Fix an of_node ref counting leak in of_find_node_opts_by_path
 
 - Introduce new graph helper of_graph_get_remote_node() which will be
   used by DRM drivers in 4.12.
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJYrcjTEBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcOPjg/8
 CZgxb3humk7Kkt+I3IsZCxsXhgdk2+CPfCSHlK1bc5Jqg0TzepQvFt4ZkuRHkZy/
 pQLUpRnUEUl64aaE8WxZY8ELYZggWazcTnWgCOzvoYpqSD4dAkAsqeti1Qh9PGKz
 fNLnPWREftojFZ7wVQ8btxC1dINc9eC9eEHsIsS8S8UIgLgv/aN6PeG1Ll/UUa9d
 u9orY3lxrz8JvdZslGtd1XLZqehIG0AAXqYRasyKl6Sc1NgjdwJTrqoeHEnCYaBM
 0+JUOf8kjRa1QNYN4SpuQ1gpovS8tPUGuODrWF2FvaQIxYHTzF8MpLqTvjBzdsj6
 b1owHzMXOLlPqqmmQ+jkHY5phisM4heJCIanNerzfM9+lHvb6kB3EuoTkAGvzsr/
 HCJi/Wk8tVrw6MYdnav0NT6aLIgZmrVspeJKlS1IdIkpsxZ64DsgX/YS/qGn/fcx
 qMrDXh8gMFwJBENRCKmKYFu1kzJkBoVEXtGlIbRQDZwOIuHPJl/ed6naMSfyUmcL
 wEe1I3buyB38FVzUTM2y0K1LfFJSJqOFSWTy5WCcTyP4cbKUyEja8vzN1Cx8BDwf
 wYtGWQQcg1Pyo074De6ojXWPiiW8f64GLLjqPALjA+J6JtZY5PwAnGXV+1ZYgX+V
 hV+kXbS4UIjN1koxroJ7ahfouWdOignmpwdvomQPLG8=
 =D/BO
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "Pretty standard stuff with dtc upstream sync being the biggest piece.

   - Sync dtc to upstream commit 0931cea3ba20. This picks up overlay
     support in dtc.

   - Set dma_ops for reserved memory users.

   - Make references to IOMMU consistent in DT bindings.

   - Cleanup references to pm_power_off in bindings.

   - Move some display bindings that snuck into the old bindings/video/
     path.

   - Fix some wrong documentation paths caused from binding
     restructuring.

   - Vendor prefixes for Faraday and Fujitsu.

   - Fix an of_node ref counting leak in of_find_node_opts_by_path

   - Introduce new graph helper of_graph_get_remote_node() which will be
     used by DRM drivers in 4.12"

* tag 'devicetree-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (27 commits)
  DT: add Faraday Tec. as vendor
  of: introduce of_graph_get_remote_node
  of: Add missing space at end of pr_fmt().
  of: make of_device_make_bus_id() static
  of: fix of_node leak caused in of_find_node_opts_by_path
  dt-bindings: net: remove reference to fixed link support
  dt-bindings: power: reset: qnap-poweroff: Drop reference to pm_power_off
  dt-bindings: power: reset: gpio-poweroff: Drop reference to pm_power_off
  dt-bindings: mfd: as3722: Drop reference to pm_power_off
  dt-bindings: display: move ANX7814 and SiI8620 bridge bindings
  of/unittest: Swap arguments of of_unittest_apply_overlay()
  Documentation: usb: fix wrong documentation paths
  serial: fsl-imx-uart.txt: Remove generic property
  devicetree: Add Fujitsu Ltd. vendor prefix
  Documentation: display: fix wrong documentation paths
  of: remove redundant memset in overlay
  bus:qcom : Fix typo in qcom,ebi2.txt
  dt-bindings: qman: Remove pool channel node
  Documentation: panel-dpi: fix path to display-timing.txt
  devicetree: bindings: clk: mvebu: fix description for sata1 on Armada XP
  ...
2017-02-22 19:23:14 -08:00
Dave Airlie
94000cc329 Linux 4.10-rc8
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYoM2fAAoJEHm+PkMAQRiGr9MH/izEAMri7rJ0QMc3ejt+WmD0
 8pkZw3+MVn71z6cIEgpzk4QkEWJd5rfhkETCeCp7qQ9V6cDW1FDE9+0OmPjiphDt
 nnzKs7t7skEBwH5Mq5xygmIfkv+Z0QGHZ20gfQWY3F56Uxo+ARF88OBHBLKhqx3v
 98C7YbMFLKBslKClA78NUEIdx0UfBaRqerlERx0Lfl9aoOrbBS6WI3iuREiylpih
 9o7HTrwaGKkU4Kd6NdgJP2EyWPsd1LGalxBBjeDSpm5uokX6ALTdNXDZqcQscHjE
 RmTqJTGRdhSThXOpNnvUJvk9L442yuNRrVme/IqLpxMdHPyjaXR3FGSIDb2SfjY=
 =VMy8
 -----END PGP SIGNATURE-----

Merge tag 'v4.10-rc8' into drm-next

Linux 4.10-rc8

Backmerge Linus rc8 to fix some conflicts, but also
to avoid pulling it in via a fixes pull from someone.
2017-02-23 12:10:12 +10:00
Linus Torvalds
37c85961c3 TTY/Serial driver patches for 4.11-rc1
Here is the big tty/serial driver patchset for 4.11-rc1.
 
 Not much here, but a lot of little fixes and individual serial driver
 updates all over the subsystem.  Majority are for the sh-sci driver and
 platform (the arch-specific changes have acks from the maintainer).
 
 The start of the "serial bus" code is here as well, but nothing is
 converted to use it yet.  That work is still ongoing, hopefully will
 start to show up across different subsystems for 4.12 (bluetooth is one
 major place that will be used.)
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWK2lDg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylwfwCgyExa4x8Lur2nZyu8cgcaVRU68VAAoNQh0WJt
 EZdEhEkRMt4d64j+ApYI
 =iv7x
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here is the big tty/serial driver patchset for 4.11-rc1.

  Not much here, but a lot of little fixes and individual serial driver
  updates all over the subsystem. Majority are for the sh-sci driver and
  platform (the arch-specific changes have acks from the maintainer).

  The start of the "serial bus" code is here as well, but nothing is
  converted to use it yet. That work is still ongoing, hopefully will
  start to show up across different subsystems for 4.12 (bluetooth is
  one major place that will be used.)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (109 commits)
  tty: pl011: Work around QDF2400 E44 stuck BUSY bit
  atmel_serial: Use the fractional divider when possible
  tty: Remove extra include in HVC console tty framework
  serial: exar: Enable MSI support
  serial: exar: Move register defines from uapi header to consumer site
  serial: pci: Remove unused pci_boards entries
  serial: exar: Move Commtech adapters to 8250_exar as well
  serial: exar: Fix feature control register constants
  serial: exar: Fix initialization of EXAR registers for ports > 0
  serial: exar: Fix mapping of port I/O resources
  serial: sh-sci: fix hardware RX trigger level setting
  tty/serial: atmel: ensure state is restored after suspending
  serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt
  serdev: ttyport: check whether tty_init_dev() fails
  serial: 8250_pci: make pciserial_detach_ports() static
  ARM: dts: STiH410-b2260: Enable HW flow-control
  ARM: dts: STiH407-family: Use new Pinctrl groups
  ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control
  ARM: dts: STiH410-b2260: Identify the UART RTS line
  dt-bindings: serial: Update 'uart-has-rtscts' description
  ...
2017-02-22 12:17:25 -08:00
Linus Torvalds
caa5942897 staging/iio driver patches for 4.11-rc1
Here is the big staging and iio driver patchsets for 4.11-rc1.
 
 We almost broke even this time around, with only a few thousand lines
 added overall, as we removed the old and obsolete i4l code, but added
 some new drivers for the RPi platform, as well as adding some new IIO
 drivers.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWK2j/w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymZ1ACdFR4o6xYrWEizmao4a/u+lUZE1aIAnRmcGcIc
 J+leO1n9bE5iadQvKYUW
 =sKVA
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/iio driver updates from Greg KH:
 "Here is the big staging and iio driver patchsets for 4.11-rc1.

  We almost broke even this time around, with only a few thousand lines
  added overall, as we removed the old and obsolete i4l code, but added
  some new drivers for the RPi platform, as well as adding some new IIO
  drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (669 commits)
  Staging: vc04_services: Fix the "space prohibited" code style errors
  Staging: vc04_services: Fix the "wrong indent" code style errors
  staging: octeon: Use net_device_stats from struct net_device
  Staging: rtl8192u: ieee80211: ieee80211.h - style fix
  Staging: rtl8192u: ieee80211: ieee80211_tx.c - style fix
  Staging: rtl8192u: ieee80211: rtl819x_BAProc.c - style fix
  Staging: rtl8192u: ieee80211: ieee80211_module.c - style fix
  Staging: rtl8192u: ieee80211: rtl819x_TSProc.c - style fix
  Staging: rtl8192u: r8192U.h - style fix
  Staging: rtl8192u: r8192U_core.c - style fix
  Staging: rtl8192u: r819xU_cmdpkt.c - style fix
  staging: rtl8192u: blank lines aren't necessary before a close brace '}'
  staging: rtl8192u: Adding space after enum and struct definition
  staging: rtl8192u: Adding space after struct definition
  Staging: ks7010: Add required and preferred spaces around operators
  Staging: ks7010: ks*: Remove redundant blank lines
  Staging: ks7010: ks*: Add missing blank lines after declarations
  staging: visorbus, replace init_timer with setup_timer
  staging: vt6656: rxtx.c Removed multiple dereferencing
  staging: vt6656: Alignment match open parenthesis
  ...
2017-02-22 12:14:01 -08:00
Linus Torvalds
e30aee9e10 char/misc driver patches for 4.11-rc1
Here is the big char/misc driver patchset for 4.11-rc1.
 
 Lots of different driver subsystems updated here.  Rework for the hyperv
 subsystem to handle new platforms better, mei and w1 and extcon driver
 updates, as well as a number of other "minor" driver updates.  Full
 details are in the shortlog below.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWK2iRQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynhFACguVE+/ixj5u5bT5DXQaZNai/6zIAAmgMWwd/t
 YTD2cwsJsGbTT1fY3SUe
 =CiSI
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver patchset for 4.11-rc1.

  Lots of different driver subsystems updated here: rework for the
  hyperv subsystem to handle new platforms better, mei and w1 and extcon
  driver updates, as well as a number of other "minor" driver updates.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
  goldfish: Sanitize the broken interrupt handler
  x86/platform/goldfish: Prevent unconditional loading
  vmbus: replace modulus operation with subtraction
  vmbus: constify parameters where possible
  vmbus: expose hv_begin/end_read
  vmbus: remove conditional locking of vmbus_write
  vmbus: add direct isr callback mode
  vmbus: change to per channel tasklet
  vmbus: put related per-cpu variable together
  vmbus: callback is in softirq not workqueue
  binder: Add support for file-descriptor arrays
  binder: Add support for scatter-gather
  binder: Add extra size to allocator
  binder: Refactor binder_transact()
  binder: Support multiple /dev instances
  binder: Deal with contexts in debugfs
  binder: Support multiple context managers
  binder: Split flat_binder_object
  auxdisplay: ht16k33: remove private workqueue
  auxdisplay: ht16k33: rework input device initialization
  ...
2017-02-22 11:38:22 -08:00
Linus Torvalds
8ff546b801 USB/PHY patches for 4.11-rc1
Here is the big USB and PHY driver updates for 4.11-rc1.
 
 Nothing major, just the normal amount of churn in the usb gadget and dwc
 and xhci controllers, new device ids, new phy drivers, a new usb-serial
 driver, and a few other minor changes in different USB drivers.
 
 All have been in linux-next for a long time with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWK2lrg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykh7ACffotTJvB/gwpuSIWh6qhA8KQ9mH8AnjlxMafv
 b5b3vfOXJ8/N0Go25VwI
 =7fqN
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big USB and PHY driver updates for 4.11-rc1.

  Nothing major, just the normal amount of churn in the usb gadget and
  dwc and xhci controllers, new device ids, new phy drivers, a new
  usb-serial driver, and a few other minor changes in different USB
  drivers.

  All have been in linux-next for a long time with no reported issues"

* tag 'usb-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits)
  usb: cdc-wdm: remove logically dead code
  USB: serial: keyspan: drop header file
  USB: serial: io_edgeport: drop io-tables header file
  usb: musb: add code comment for clarification
  usb: misc: add USB251xB/xBi Hi-Speed Hub Controller Driver
  usb: misc: usbtest: remove redundant check on retval < 0
  USB: serial: upd78f0730: sort device ids
  USB: serial: upd78f0730: add ID for EVAL-ADXL362Z
  ohci-hub: fix typo in dbg_port macro
  usb: musb: dsps: Manage CPPI 4.1 DMA interrupt in DSPS
  usb: musb: tusb6010: Clean up tusb_omap_dma structure
  usb: musb: cppi_dma: Clean up cppi41_dma_controller structure
  usb: musb: cppi_dma: Clean up cppi structure
  usb: musb: cppi41: Detect aborted transfers in cppi41_dma_callback()
  usb: musb: dma: Add a DMA completion platform callback
  drivers: usb: usbip: Add missing break statement to switch
  usb: mtu3: remove redundant dev_err call in get_ssusb_rscs()
  USB: serial: mos7840: fix another NULL-deref at open
  USB: serial: console: clean up sanity checks
  USB: serial: console: fix uninitialised spinlock
  ...
2017-02-22 11:15:59 -08:00
Linus Torvalds
a4ee7bacd6 ARC updates for 4.11 rc1
- Intc imporvements [Yuriy]
 
  - VDK platform updates [Alexey]
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYrci0AAoJEGnX8d3iisJeNYcQAI3QH6jYnqb27viEqZ0jmTcC
 ItrxiD6L6oeiSYRZg9lY/4FwwiQUDhM3/Kt/+hGhLz1SBqjXGJ79DgtVyRTdHh+m
 nNiNrDVbFuiV6P8KbZX85tjW5QJI2HuahUoxyGNvnFG1k6vujmHuKBYm7eNz7XuM
 +18t89xqeQs7oluPX/MhuhfGwMzxscK69hT100WclYv/k2+mpU1fN/19Ygaw+IKJ
 p5HpxWj8WjyZ+4yODaqrZhFSwyOp8a+2nIMSPu0LIq+tg3a+kj+yACZfdmV+WbuD
 WncqI+tVzevk45BjSOH/3s1WOmNqAJswADpLS7AjVs/UmrK77UkQwRNo1jtEIz6Y
 XaCRuebCtWtoTDd1B44eHQNVStrQCnapjuUlTy7iFDwd/ldexrKFRO0DrvUvx652
 XFgSY0BWyc3rnlckDugKixG6RnqY0jsGEaJAe2hNaMS3t87Pt1vNZ6y+75v0917F
 cG+rShA6GQ1vBaed+vWG8ocnKCfrzYsAODOBSko16KUdZsKTDIXCTMunFASr7Erg
 Z2wY4ntXVgRRhVCZX7poICwPnlvxKZrQfbbR7i+Z0Jmnuog1yEMMkUwK6Cn3cHoX
 mvQgPF1+XNGL0/8cXDuFGYyVKSpD6/Vc1z3bTjkjxy43Amys4faPFinXvZH7nJLK
 I/4jBW4+0QI38PxQFcfA
 =WPBu
 -----END PGP SIGNATURE-----

Merge tag 'arc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC updates from Vineet Gupta:

 - Intc imporvements [Yuriy]

 - VDK platform updates [Alexey]

* tag 'arc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [plat-*] ARC_HAS_COH_CACHES no longer relevant
  ARCv2: intc: Delete useless comments in Device Trees
  ARCv2: IDU-intc: Delete deprecated parameters in Device Trees
  ARCv2: IDU-intc: mask all common interrupts by default
  ARCv2: IDU-intc: Use build registers for getting numbers of interrupts
  ARCv2: intc: Set default priority for all core interrupts
  ARCv2: intc: Use runtime value of irq count for setting up intc
  ARCv2: intc: Rework the build time irq count information
  ARC: [intc-*]: confine NR_CPU_IRQS to intc code
  ARCv2: intc: Use ARC_REG_STATUS32 for addressing STATUS32 reg
  arc: vdk: Add support of UIO
  arc: vdk: Add support of MMC controller
  arc: vdk: Disable halt on reset
2017-02-22 10:33:53 -08:00
Linus Torvalds
38705613b7 powerpc updates for 4.11 part 1.
Highlights include:
 
  - Support for direct mapped LPC on POWER9, giving Linux direct access to
    devices that may be on there such as a UART.
 
  - Memory hotplug support for the Power9 Radix MMU.
 
  - Add new AUX vectors describing the processor's cache geometry, to be used by
    glibc.
 
  - The ability for a guest to ask the hypervisor to resize the guest's hash
    table, and in addition support for doing so automatically when memory is
    hotplugged into/out-of the guest. This allows the hash table to be sized
    based on the current memory usage of the guest, rather than the maximum
    possible memory usage.
 
  - Implementation of optprobes (kprobe optimisation) for powerpc.
 
 In addition there's the topic branch shared with the KVM tree, which includes
 support for guests to use the Radix MMU on Power9.
 
 Thanks to:
   Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T, Anton Blanchard,
   Benjamin Herrenschmidt, Chris Packham, Daniel Axtens, Daniel Borkmann, David
   Gibson, Finn Thain, Gautham R. Shenoy, Gavin Shan, Greg Kurz, Joel Stanley,
   John Allen, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Michael
   Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Ravi
   Bangoria, Reza Arbab, Shailendra Singh, Vaibhav Jain, Wei Yongjun.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYrWj0AAoJEFHr6jzI4aWAsn4P/08Kz3TtOvDuuPGVNoO7fWOn
 ag5/zVt8R4FuCALqWpAZbVqMuUU4wLxG0RuWlmBNYYhrjMC6JxHpOSjQXxM2D7YT
 CdGTJxG414r6HMOeToL9i/z33o0m+KT07tscer+QMKlXVKCR2z0fEJch+zoPBHYA
 5eVBFpLLTtbNiX9UnrcM/vYz61d56kT4YJey9/8qbAkTAc1rMPa8ucU5UiKYJ7yX
 mF8cd7WE+7aqif9V8yN59G2rcbz+h3pbMw/gzImiYsYrUj4fLjU+VTKL5PPT+UFy
 WWBXD3MAMm1dksMMZi3hgoo2BZhDn3RkymeYi6Jo4kDknNMPZzkMxGyvaJ8Eq5H/
 bIYXdS1AbTtvaaEEuWqDFjpnChOEvj/8IeqitU0jjlql8BVjNKg/ESaaKucZr+pO
 pk2Mfvw0Tb/lxJT5qj27yq4aRsxJwdFOoPYCN7MquPp/wV2Tg5M6h4nVQ4T6Wl0S
 tMFQeCqXflhDWh0Xgr2UXpF66/YTj3Du5LasOTkgGeU30Z8TcNGFEmDWShKP3cEm
 e0oQE+OHhIGN4WSBXBAto/Gw8/0v3pXlMs+VEfeHqenwPss2sWtSwXWe8khmiy9e
 DJ48sTzj75/Zx1fiqRldw9YEnrL+NK0eOOpvzxeyKpfvdUytc+chFfEqUmO6kl3Z
 DW2UmlZxmW+b0SfexCHL
 =Icle
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights include:

   - Support for direct mapped LPC on POWER9, giving Linux direct access
     to devices that may be on there such as a UART.

   - Memory hotplug support for the Power9 Radix MMU.

   - Add new AUX vectors describing the processor's cache geometry, to
     be used by glibc.

   - The ability for a guest to ask the hypervisor to resize the guest's
     hash table, and in addition support for doing so automatically when
     memory is hotplugged into/out-of the guest. This allows the hash
     table to be sized based on the current memory usage of the guest,
     rather than the maximum possible memory usage.

   - Implementation of optprobes (kprobe optimisation) for powerpc.

  In addition there's the topic branch shared with the KVM tree, which
  includes support for guests to use the Radix MMU on Power9.

  Thanks to:
    Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T, Anton
    Blanchard, Benjamin Herrenschmidt, Chris Packham, Daniel Axtens,
    Daniel Borkmann, David Gibson, Finn Thain, Gautham R. Shenoy, Gavin
    Shan, Greg Kurz, Joel Stanley, John Allen, Madhavan Srinivasan,
    Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Nathan Fontenot,
    Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Ravi Bangoria, Reza
    Arbab, Shailendra Singh, Vaibhav Jain, Wei Yongjun"

* tag 'powerpc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (129 commits)
  powerpc/mm/radix: Skip ptesync in pte update helpers
  powerpc/mm/radix: Use ptep_get_and_clear_full when clearing pte for full mm
  powerpc/mm/radix: Update pte update sequence for pte clear case
  powerpc/mm: Update PROTFAULT handling in the page fault path
  powerpc/xmon: Fix data-breakpoint
  powerpc/mm: Fix build break with BOOK3S_64=n and MEMORY_HOTPLUG=y
  powerpc/mm: Fix build break when CMA=n && SPAPR_TCE_IOMMU=y
  powerpc/mm: Fix build break with RADIX=y & HUGETLBFS=n
  powerpc/pseries: Fix typo in parameter description
  powerpc/kprobes: Remove kprobe_exceptions_notify()
  kprobes: Introduce weak variant of kprobe_exceptions_notify()
  powerpc/ftrace: Fix confusing help text for DISABLE_MPROFILE_KERNEL
  powerpc/powernv: Fix opal_exit tracepoint opcode
  powerpc: Add a prototype for mcount() so it can be versioned
  powerpc: Drop GPL from of_node_to_nid() export to match other arches
  powerpc/kprobes: Optimize kprobe in kretprobe_trampoline()
  powerpc/kprobes: Implement Optprobes
  powerpc/kprobes: Fixes for kprobe_lookup_name() on BE
  powerpc: Add helper to check if offset is within relative branch range
  powerpc/bpf: Introduce __PPC_SH64()
  ...
2017-02-22 10:30:38 -08:00
Linus Torvalds
3051bf36c2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Support TX_RING in AF_PACKET TPACKET_V3 mode, from Sowmini
      Varadhan.

   2) Simplify classifier state on sk_buff in order to shrink it a bit.
      From Willem de Bruijn.

   3) Introduce SIPHASH and it's usage for secure sequence numbers and
      syncookies. From Jason A. Donenfeld.

   4) Reduce CPU usage for ICMP replies we are going to limit or
      suppress, from Jesper Dangaard Brouer.

   5) Introduce Shared Memory Communications socket layer, from Ursula
      Braun.

   6) Add RACK loss detection and allow it to actually trigger fast
      recovery instead of just assisting after other algorithms have
      triggered it. From Yuchung Cheng.

   7) Add xmit_more and BQL support to mvneta driver, from Simon Guinot.

   8) skb_cow_data avoidance in esp4 and esp6, from Steffen Klassert.

   9) Export MPLS packet stats via netlink, from Robert Shearman.

  10) Significantly improve inet port bind conflict handling, especially
      when an application is restarted and changes it's setting of
      reuseport. From Josef Bacik.

  11) Implement TX batching in vhost_net, from Jason Wang.

  12) Extend the dummy device so that VF (virtual function) features,
      such as configuration, can be more easily tested. From Phil
      Sutter.

  13) Avoid two atomic ops per page on x86 in bnx2x driver, from Eric
      Dumazet.

  14) Add new bpf MAP, implementing a longest prefix match trie. From
      Daniel Mack.

  15) Packet sample offloading support in mlxsw driver, from Yotam Gigi.

  16) Add new aquantia driver, from David VomLehn.

  17) Add bpf tracepoints, from Daniel Borkmann.

  18) Add support for port mirroring to b53 and bcm_sf2 drivers, from
      Florian Fainelli.

  19) Remove custom busy polling in many drivers, it is done in the core
      networking since 4.5 times. From Eric Dumazet.

  20) Support XDP adjust_head in virtio_net, from John Fastabend.

  21) Fix several major holes in neighbour entry confirmation, from
      Julian Anastasov.

  22) Add XDP support to bnxt_en driver, from Michael Chan.

  23) VXLAN offloads for enic driver, from Govindarajulu Varadarajan.

  24) Add IPVTAP driver (IP-VLAN based tap driver) from Sainath Grandhi.

  25) Support GRO in IPSEC protocols, from Steffen Klassert"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1764 commits)
  Revert "ath10k: Search SMBIOS for OEM board file extension"
  net: socket: fix recvmmsg not returning error from sock_error
  bnxt_en: use eth_hw_addr_random()
  bpf: fix unlocking of jited image when module ronx not set
  arch: add ARCH_HAS_SET_MEMORY config
  net: napi_watchdog() can use napi_schedule_irqoff()
  tcp: Revert "tcp: tcp_probe: use spin_lock_bh()"
  net/hsr: use eth_hw_addr_random()
  net: mvpp2: enable building on 64-bit platforms
  net: mvpp2: switch to build_skb() in the RX path
  net: mvpp2: simplify MVPP2_PRS_RI_* definitions
  net: mvpp2: fix indentation of MVPP2_EXT_GLOBAL_CTRL_DEFAULT
  net: mvpp2: remove unused register definitions
  net: mvpp2: simplify mvpp2_bm_bufs_add()
  net: mvpp2: drop useless fields in mvpp2_bm_pool and related code
  net: mvpp2: remove unused 'tx_skb' field of 'struct mvpp2_tx_queue'
  net: mvpp2: release reference to txq_cpu[] entry after unmapping
  net: mvpp2: handle too large value in mvpp2_rx_time_coal_set()
  net: mvpp2: handle too large value handling in mvpp2_rx_pkts_coal_set()
  net: mvpp2: remove useless arguments in mvpp2_rx_{pkts, time}_coal_set
  ...
2017-02-22 10:15:09 -08:00
Jia Hongtao
0d4b7bf120 dt-bindings: Update QorIQ TMU thermal bindings
For different types of SoC the sensor id and endianness may vary.
"#thermal-sensor-cells" is used to provide sensor id information.
"little-endian" property is to tell the endianness of TMU.

Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2017-02-22 15:29:30 +08:00