i.MX8MQ and i.MX8MM share same gpc module with i.MX7D, they
can reuse gpcv2 pgc driver for power domain control, this
patch renames all functions and structure definitions started
with "imx7" to "imx", and use .data in imx_gpcv2_dt_ids[] to
pass platform specific power domain data for power domain
driver, thus make gpcv2 pgc driver more generic for i.MX
platforms.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
gpcv2 driver is NOT just used on i.MX7D which has Cortex-A7
cores, but also on i.MX8MQ/i.MX8MM platforms which use Cortex-A53
cores, so let's use A_CORE instread of A7 to avoid confusion.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Correct MIPI/PCIe/USB_HSIC's PGC offset based on
design RTL, the values in the Reference Manual
(Rev. 1, 01/2018 and the older ones) are incorrect.
The correct offset values should be as below:
0x800 ~ 0x83F: PGC for core0 of A7 platform;
0x840 ~ 0x87F: PGC for core1 of A7 platform;
0x880 ~ 0x8BF: PGC for SCU of A7 platform;
0xA00 ~ 0xA3F: PGC for fastmix/megamix;
0xC00 ~ 0xC3F: PGC for MIPI PHY;
0xC40 ~ 0xC7F: PGC for PCIe_PHY;
0xC80 ~ 0xCBF: PGC for USB OTG1 PHY;
0xCC0 ~ 0xCFF: PGC for USB OTG2 PHY;
0xD00 ~ 0xD3F: PGC for USB HSIC PHY;
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Fixes: 03aa12629f ("soc: imx: Add GPCv2 power gating driver")
Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Platform device core assumes the ownership of dev.platform_data as
well as that it is dynamically allocated and it will try to kfree it
as a part of platform_device_release(). Change the code to use
platform_device_add_data() n instead of a pointer to a static memory
to avoid causing a BUG() when calling platform_device_put().
The problem can be reproduced by artificially enabling the error path
of platform_device_add() call (around line 357).
Note that this change also allows us to constify imx7_pgc_domains,
since we no longer need to be able to modify it.
Cc: Stefan Agner <stefan@agner.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
If a regulator requests a deferred probe, the power domain gets
initialized twice. This leads to a list double add (without
list debugging the kernel hangs due to the double add later):
WARNING: CPU: 0 PID: 19 at lib/list_debug.c:31 __list_add_valid+0xbc/0xc4
list_add double add: new=c1229754, prev=c12383b4, next=c1229754.
Initialize the power domain after we get the regulator. Also do
not print an error in case the regulator defers probing.
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Fixes: 03aa12629f ("soc: imx: Add GPCv2 power gating driver")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add code allowing for control of various power domains managed by GPCv2
IP block found in i.MX7 series of SoCs. Power domains covered by this
patch are:
- PCIE PHY
- MIPI PHY
- USB HSIC PHY
- USB OTG1/2 PHY
Support for any other power domain controlled by GPC is not present, and
can be added at some later point.
Testing of this code was done against a PCIe driver.
Cc: yurovsky@gmail.com
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Dong Aisheng <dongas86@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
