Remove pointless references to the file name itself and condense the
information so it wastes less space.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Link: https://lkml.kernel.org/r/20180314212030.412095827@linutronix.de
Meelis reported the following warning on a quad P3 HP NetServer museum piece:
WARNING: CPU: 3 PID: 258 at kernel/irq/chip.c:244 __irq_startup+0x80/0x100
EIP: __irq_startup+0x80/0x100
irq_startup+0x7e/0x170
probe_irq_on+0x128/0x2b0
parport_irq_probe.constprop.18+0x8d/0x1af [parport_pc]
parport_pc_probe_port+0xf11/0x1260 [parport_pc]
parport_pc_init+0x78a/0xf10 [parport_pc]
parport_parse_param.constprop.16+0xf0/0xf0 [parport_pc]
do_one_initcall+0x45/0x1e0
This is caused by the rewrite of the irq activation/startup sequence which
missed to convert a callsite in the irq legacy auto probing code.
To fix this irq_activate_and_startup() needs to gain a return value so the
pending logic can work proper.
Fixes: c942cee46b ("genirq: Separate activation and startup")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Meelis Roos <mroos@linux.ee>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801301935410.1797@nanos
Pull irq core updates from Thomas Gleixner:
"A rather large update for the interrupt core code and the irq chip drivers:
- Add a new bitmap matrix allocator and supporting changes, which is
used to replace the x86 vector allocator which comes with separate
pull request. This allows to replace the convoluted nested loop
allocation function in x86 with a facility which supports the
recently added property of managed interrupts proper and allows to
switch to a best effort vector reservation scheme, which addresses
problems with vector exhaustion.
- A large update to the ARM GIC-V3-ITS driver adding support for
range selectors.
- New interrupt controllers:
- Meson and Meson8 GPIO
- BCM7271 L2
- Socionext EXIU
If you expected that this will stop at some point, I have to
disappoint you. There are new ones posted already. Sigh!
- STM32 interrupt controller support for new platforms.
- A pile of fixes, cleanups and updates to the MIPS GIC driver
- The usual small fixes, cleanups and updates all over the place.
Most visible one is to move the irq chip drivers Kconfig switches
into a separate Kconfig menu"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
genirq: Fix type of shifting literal 1 in __setup_irq()
irqdomain: Drop pointless NULL check in virq_debug_show_one
genirq/proc: Return proper error code when irq_set_affinity() fails
irq/work: Use llist_for_each_entry_safe
irqchip: mips-gic: Print warning if inherited GIC base is used
irqchip/mips-gic: Add pr_fmt and reword pr_* messages
irqchip/stm32: Move the wakeup on interrupt mask
irqchip/stm32: Fix initial values
irqchip/stm32: Add stm32h7 support
dt-bindings/interrupt-controllers: Add compatible string for stm32h7
irqchip/stm32: Add multi-bank management
irqchip/stm32: Select GENERIC_IRQ_CHIP
irqchip/exiu: Add support for Socionext Synquacer EXIU controller
dt-bindings: Add description of Socionext EXIU interrupt controller
irqchip/gic-v3-its: Fix VPE activate callback return value
irqchip: mips-gic: Make IPI bitmaps static
irqchip: mips-gic: Share register writes in gic_set_type()
irqchip: mips-gic: Remove gic_vpes variable
irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs
irqchip: mips-gic: Configure EIC when CPUs come online
...
Managed interrupts can end up in a stale state on CPU hotplug. If the
interrupt is not targeting a single CPU, i.e. the affinity mask spawns
multiple CPUs then the following can happen:
After boot:
dstate: 0x01601200
IRQD_ACTIVATED
IRQD_IRQ_STARTED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_SET
IRQD_AFFINITY_MANAGED
node: 0
affinity: 24-31
effectiv: 24
pending: 0
After offlining CPU 31 - 24
dstate: 0x01a31000
IRQD_IRQ_DISABLED
IRQD_IRQ_MASKED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_SET
IRQD_AFFINITY_MANAGED
IRQD_MANAGED_SHUTDOWN
node: 0
affinity: 24-31
effectiv: 24
pending: 0
Now CPU 25 gets onlined again, so it should get the effective interrupt
affinity for this interruopt, but due to the x86 interrupt affinity setter
restrictions this ends up after restarting the interrupt with:
dstate: 0x01601300
IRQD_ACTIVATED
IRQD_IRQ_STARTED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_SET
IRQD_SETAFFINITY_PENDING
IRQD_AFFINITY_MANAGED
node: 0
affinity: 24-31
effectiv: 24
pending: 24-31
So the interrupt is still affine to CPU 24, which was the last CPU to go
offline of that affinity set and the move to an online CPU within 24-31,
in this case 25, is pending. This mechanism is x86/ia64 specific as those
architectures cannot move interrupts from thread context and do this when
an interrupt is actually handled. So the move is set to pending.
Whats worse is that offlining CPU 25 again results in:
dstate: 0x01601300
IRQD_ACTIVATED
IRQD_IRQ_STARTED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_SET
IRQD_SETAFFINITY_PENDING
IRQD_AFFINITY_MANAGED
node: 0
affinity: 24-31
effectiv: 24
pending: 24-31
This means the interrupt has not been shut down, because the outgoing CPU
is not in the effective affinity mask, but of course nothing notices that
the effective affinity mask is pointing at an offline CPU.
In the case of restarting a managed interrupt the move restriction does not
apply, so the affinity setting can be made unconditional. This needs to be
done _before_ the interrupt is started up as otherwise the condition for
moving it from thread context would not longer be fulfilled.
With that change applied onlining CPU 25 after offlining 31-24 results in:
dstate: 0x01600200
IRQD_ACTIVATED
IRQD_IRQ_STARTED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_MANAGED
node: 0
affinity: 24-31
effectiv: 25
pending:
And after offlining CPU 25:
dstate: 0x01a30000
IRQD_IRQ_DISABLED
IRQD_IRQ_MASKED
IRQD_SINGLE_TARGET
IRQD_AFFINITY_MANAGED
IRQD_MANAGED_SHUTDOWN
node: 0
affinity: 24-31
effectiv: 25
pending:
which is the correct and expected result.
Fixes: 761ea388e8 ("genirq: Handle managed irqs gracefully in irq_startup()")
Reported-by: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: axboe@kernel.dk
Cc: linux-scsi@vger.kernel.org
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: mpe@ellerman.id.au
Cc: Shivasharan Srikanteshwara <shivasharan.srikanteshwara@broadcom.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: keith.busch@intel.com
Cc: peterz@infradead.org
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1710042208400.2406@nanos
Propagate the early activation mode to the irqdomain activate()
callbacks. This is required for the upcoming reservation, late vector
assignment scheme, so that the early activation call can act accordingly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Yu Chen <yu.c.chen@intel.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20170913213153.028353660@linutronix.de
Allow irq_domain_activate_irq() to fail. This is required to support a
reservation and late vector assignment scheme.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Yu Chen <yu.c.chen@intel.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20170913213152.933882227@linutronix.de
Activation of an interrupt and startup are currently a combo
functionlity. That works so far, but upcoming changes require a strict
separation because the activation can fail in future.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Yu Chen <yu.c.chen@intel.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: https://lkml.kernel.org/r/20170913213152.754334077@linutronix.de
The result of cpumask_any_and() is invalid when result greater or equal
nr_cpu_ids. The current check is checking for greater only. Fix it.
Fixes: 761ea388e8 ("genirq: Handle managed irqs gracefully in irq_startup()")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Chen Yu <yu.c.chen@intel.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rui Zhang <rui.zhang@intel.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/20170913213152.272283444@linutronix.de
Pull irq updates from Thomas Gleixner:
"The interrupt subsystem delivers this time:
- Refactoring of the GIC-V3 driver to prepare for the GIC-V4 support
- Initial GIC-V4 support
- Consolidation of the FSL MSI support
- Utilize the effective affinity interface in various ARM irqchip
drivers
- Yet another interrupt chip driver (UniPhier AIDET)
- Bulk conversion of the irq chip driver to use %pOF
- The usual small fixes and improvements all over the place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
irqchip/ls-scfg-msi: Add MSI affinity support
irqchip/ls-scfg-msi: Add LS1043a v1.1 MSI support
irqchip/ls-scfg-msi: Add LS1046a MSI support
arm64: dts: ls1046a: Add MSI dts node
arm64: dts: ls1043a: Share all MSIs
arm: dts: ls1021a: Share all MSIs
arm64: dts: ls1043a: Fix typo of MSI compatible string
arm: dts: ls1021a: Fix typo of MSI compatible string
irqchip/ls-scfg-msi: Fix typo of MSI compatible strings
irqchip/irq-bcm7120-l2: Use correct I/O accessors for irq_fwd_mask
irqchip/mmp: Make mmp_intc_conf const
irqchip/gic: Make irq_chip const
irqchip/gic-v3: Advertise GICv4 support to KVM
irqchip/gic-v4: Enable low-level GICv4 operations
irqchip/gic-v4: Add some basic documentation
irqchip/gic-v4: Add VLPI configuration interface
irqchip/gic-v4: Add VPE command interface
irqchip/gic-v4: Add per-VM VPE domain creation
irqchip/gic-v3-its: Set implementation defined bit to enable VLPIs
irqchip/gic-v3-its: Allow doorbell interrupts to be injected/cleared
...
irq_modify_status starts by clearing the trigger settings from
irq_data before applying the new settings, but doesn't restore them,
leaving them to IRQ_TYPE_NONE.
That's pretty confusing to the potential request_irq() that could
follow. Instead, snapshot the settings before clearing them, and restore
them if the irq_modify_status() invocation was not changing the trigger.
Fixes: 1e2a7d7849 ("irqdomain: Don't set type when mapping an IRQ")
Reported-and-tested-by: jeffy <jeffy.chen@rock-chips.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jon Hunter <jonathanh@nvidia.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170818095345.12378-1-marc.zyngier@arm.com
Follow-on patch for gpio-thunderx uses a irqdomain hierarchy which
requires slightly different flow handlers, add them to chip.c which
contains most of the other flow handlers. Make these conditionally
compiled based on CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Link: http://lkml.kernel.org/r/1503017616-3252-3-git-send-email-david.daney@cavium.com
Many of the family of functions including irq_chip_mask_parent(),
irq_chip_unmask_parent() are exported, but not all.
Add EXPORT_SYMBOL_GPL to irq_chip_enable_parent,
irq_chip_disable_parent and irq_chip_set_affinity_parent, so they
likewise are usable from modules.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Link: http://lkml.kernel.org/r/1503017616-3252-2-git-send-email-david.daney@cavium.com
Interrupts with the IRQF_FORCE_RESUME flag set have also the
IRQF_NO_SUSPEND flag set. They are not disabled in the suspend path, but
must be forcefully resumed. That's used by XEN to keep IPIs enabled beyond
the suspension of device irqs. Force resume works by pretending that the
interrupt was disabled and then calling __irq_enable().
Incrementing the disabled depth counter was enough to do that, but with the
recent changes which use state flags to avoid unnecessary hardware access,
this is not longer sufficient. If the state flags are not set, then the
hardware callbacks are not invoked and the interrupt line stays disabled in
"hardware".
Set the disabled and masked state when pretending that an interrupt got
disabled by suspend.
Fixes: bf22ff45be ("genirq: Avoid unnecessary low level irq function calls")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Cc: boris.ostrovsky@oracle.com
Link: http://lkml.kernel.org/r/20170717174703.4603-2-jgross@suse.com
Pull irq fixes from Thomas Gleixner:
- A few fixes mopping up the fallout of the big irq overhaul
- Move the interrupt resource management logic out of the spin locked,
irq disabled region to avoid unnecessary restrictions of the resource
callbacks
- Preparation for reworking the per cpu irq request function.
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqdomain: Allow ACPI device nodes to be used as irqdomain identifiers
genirq/debugfs: Remove redundant NULL pointer check
genirq: Allow to pass the IRQF_TIMER flag with percpu irq request
genirq/timings: Move free timings out of spinlocked region
genirq: Move irq resource handling out of spinlocked region
genirq: Add mutex to irq desc to serialize request/free_irq()
genirq: Move bus locking into __setup_irq()
genirq: Force inlining of __irq_startup_managed to prevent build failure
genirq/debugfs: Fix build for !CONFIG_IRQ_DOMAIN
If CONFIG_SMP=n, and gcc (e.g. 4.1.2) decides not to inline
__irq_startup_managed(), the build fails with:
kernel/built-in.o: In function `irq_startup':
(.text+0x38ed8): undefined reference to `irq_set_affinity_locked'
Fix this by forcing inlining of __irq_startup_managed().
Fixes: 761ea388e8 ("genirq: Handle managed irqs gracefully in irq_startup()")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: http://lkml.kernel.org/r/1499162761-12398-1-git-send-email-geert@linux-m68k.org
around. Highlights include:
- Conversion of a bunch of security documentation into RST
- The conversion of the remaining DocBook templates by The Amazing
Mauro Machine. We can now drop the entire DocBook build chain.
- The usual collection of fixes and minor updates.
-----BEGIN PGP SIGNATURE-----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=cVjZ
-----END PGP SIGNATURE-----
Merge tag 'docs-4.13' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"There has been a fair amount of activity in the docs tree this time
around. Highlights include:
- Conversion of a bunch of security documentation into RST
- The conversion of the remaining DocBook templates by The Amazing
Mauro Machine. We can now drop the entire DocBook build chain.
- The usual collection of fixes and minor updates"
* tag 'docs-4.13' of git://git.lwn.net/linux: (90 commits)
scripts/kernel-doc: handle DECLARE_HASHTABLE
Documentation: atomic_ops.txt is core-api/atomic_ops.rst
Docs: clean up some DocBook loose ends
Make the main documentation title less Geocities
Docs: Use kernel-figure in vidioc-g-selection.rst
Docs: fix table problems in ras.rst
Docs: Fix breakage with Sphinx 1.5 and upper
Docs: Include the Latex "ifthen" package
doc/kokr/howto: Only send regression fixes after -rc1
docs-rst: fix broken links to dynamic-debug-howto in kernel-parameters
doc: Document suitability of IBM Verse for kernel development
Doc: fix a markup error in coding-style.rst
docs: driver-api: i2c: remove some outdated information
Documentation: DMA API: fix a typo in a function name
Docs: Insert missing space to separate link from text
doc/ko_KR/memory-barriers: Update control-dependencies example
Documentation, kbuild: fix typo "minimun" -> "minimum"
docs: Fix some formatting issues in request-key.rst
doc: ReSTify keys-trusted-encrypted.txt
doc: ReSTify keys-request-key.txt
...
Affinity managed interrupts should keep their assigned affinity accross CPU
hotplug. To avoid magic hackery in device drivers, the core code shall
manage them transparently and set these interrupts into a managed shutdown
state when the last CPU of the assigned affinity mask goes offline. The
interrupt will be restarted when one of the CPUs in the assigned affinity
mask comes back online.
Add the necessary logic to irq_startup(). If an interrupt is requested and
started up, the code checks whether it is affinity managed and if so, it
checks whether a CPU in the interrupts affinity mask is online. If not, it
puts the interrupt into managed shutdown state.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235447.189851170@linutronix.de
In order to handle managed interrupts gracefully on irq_startup() so they
won't lose their assigned affinity, it's necessary to allow startups which
keep the interrupts in managed shutdown state, if none of the assigend CPUs
is online. This allows drivers to request interrupts w/o the CPUs being
online, which avoid online/offline churn in drivers.
Add a force argument which can override that decision and let only
request_irq() and enable_irq() allow the managed shutdown
handling. enable_irq() is required, because the interrupt might be
requested with IRQF_NOAUTOEN and enable_irq() invokes irq_startup() which
would then wreckage the assignment again. All other callers force startup
and potentially break the assigned affinity.
No functional change as this only adds the function argument.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235447.112094565@linutronix.de
Split out the inner workings of irq_startup() so it can be reused to handle
managed interrupts gracefully.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235447.033235144@linutronix.de
The startup vs. setaffinity ordering of interrupts depends on the
IRQF_NOAUTOEN flag. Chained interrupts are not getting any affinity
assignment at all.
A regular interrupt is started up and then the affinity is set. A
IRQF_NOAUTOEN marked interrupt is not started up, but the affinity is set
nevertheless.
Move the affinity setup to startup_irq() so the ordering is always the same
and chained interrupts get the proper default affinity assigned as well.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170619235445.020534783@linutronix.de
Shared interrupts do not go well with disabling auto enable:
1) The sharing interrupt might request it while it's still disabled and
then wait for interrupts forever.
2) The interrupt might have been requested by the driver sharing the line
before IRQ_NOAUTOEN has been set. So the driver which expects that
disabled state after calling request_irq() will not get what it wants.
Even worse, when it calls enable_irq() later, it will trigger the
unbalanced enable_irq() warning.
Reported-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: dianders@chromium.org
Cc: jeffy <jeffy.chen@rock-chips.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: tfiga@chromium.org
Link: http://lkml.kernel.org/r/20170531100212.210682135@linutronix.de
If an interrupt is marked NOAUTOEN then request_irq() installs the action,
but does not enable the interrupt via startup_irq(). The interrupt is
enabled via enable_irq() later from the driver. enable_irq() calls
irq_enable().
That means that for interrupts which have a irq_startup() callback this
callback is never invoked. Neither is irq_domain_activate_irq() invoked for
such interrupts.
If an interrupt depends on irq_startup() or irq_domain_activate_irq() then
the enable via irq_enable() is not enough.
Add a status flag IRQD_IRQ_STARTED_UP and use this to select the proper
mechanism in enable_irq(). Use the flag also to avoid pointless calls into
the low level functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: dianders@chromium.org
Cc: jeffy <jeffy.chen@rock-chips.com>
Cc: Brian Norris <briannorris@chromium.org>
Cc: tfiga@chromium.org
Link: http://lkml.kernel.org/r/20170531100212.130986205@linutronix.de
irq_set_chained_handler_and_data() sets up the chained interrupt and then
stores the handler data.
That's racy against an immediate interrupt which gets handled before the
store of the handler data happened. The handler will dereference a NULL
pointer and crash.
Cure it by storing handler data before installing the chained handler.
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
This book got converted from DocBook. Update its references to
point to the current location.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
On a specific audio system an interrupt input of an audio CODEC is used as a
shared interrupt. That interrupt input is handled by a CODEC specific irq
chip driver and triggers a CPU interrupt via the CODEC irq output line.
The CODEC interrupt handler demultiplexes the CODEC interrupt inputs and
the interrupt handlers for these demultiplexed inputs run nested in the
context of the CODEC interrupt handler.
The demultiplexed interrupts use handle_nested_irq() as their interrupt
handler, which unfortunately has no support for shared interrupts. So the
above hardware cannot be supported.
Add shared interrupt support to handle_nested_irq() by iterating over the
interrupt action chain.
[ tglx: Massaged changelog ]
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Cc: patches@opensource.wolfsonmicro.com
Link: http://lkml.kernel.org/r/1488904098-5350-1-git-send-email-ckeepax@opensource.wolfsonmicro.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fixes the following sparse warning:
kernel/irq/chip.c:786:1: warning:
symbol '__irq_do_set_handler' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: http://lkml.kernel.org/r/1474817799-18676-1-git-send-email-weiyj.lk@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There is no point in trying to configure the trigger of a chained
interrupt if no trigger information has been configured. At best
this is ignored, and at the worse this confuses the underlying
irqchip (which is likely not to handle such a thing), and
unnecessarily alarms the user.
Only apply the configuration if type is not IRQ_TYPE_NONE.
Fixes: 1e12c4a939 ("genirq: Correctly configure the trigger on chained interrupts")
Reported-and-tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/CAMuHMdVW1eTn20=EtYcJ8hkVwohaSuH_yQXrY2MGBEvZ8fpFOg@mail.gmail.com
Link: http://lkml.kernel.org/r/1474274967-15984-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
- ACPI IORT core code
- IORT support for the GICv3 ITS
- A few of GIC cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Xhg0
-----END PGP SIGNATURE-----
Merge tag 'irqchip-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Merge the first drop of irqchip updates for 4.9 from Marc Zyngier:
- ACPI IORT core code
- IORT support for the GICv3 ITS
- A few of GIC cleanups
Some callers of __irq_set_trigger() masks all flags except trigger mode
flags. This is unnecessary, ase __irq_set_trigger() already does this
before usage of flags.
[ tglx: Moved the flag mask and adjusted comment. Removed the hunk in
enable_percpu_irq() as it is required there ]
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Link: http://lkml.kernel.org/r/20160719095408.13778-1-kuleshovmail@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The percpu_devid handler is not robust against spurious interrupts. If a
spurious interrupt happens and no action is installed then the handler
crashes with a NULL pointer dereference.
Add a sanity check for this and log the wreckage once in dmesg.
Reported-by: Majun <majun258@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: guohanjun@huawei.com
Cc: dingtianhong@huawei.com
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1609021436160.5647@nanos
Commit 1e2a7d7849 ("irqdomain: Don't set type when mapping an IRQ")
moved the trigger configuration call from the irqdomain mapping to
the interrupt being actually requested.
This patch failed to handle the case where we configure a chained
interrupt, which doesn't get requested through the usual path.
In order to solve this, let's call __irq_set_trigger just before
starting the cascade interrupt. Special care must be taken to
make the flow handler stick, as the .irq_set_type method could
have reset it (it doesn't know we're dealing with a chained
interrupt).
Based on an initial patch by Jon Hunter.
Fixes: 1e2a7d7849 ("irqdomain: Don't set type when mapping an IRQ")
Reported-by: John Stultz <john.stultz@linaro.org>
Reported-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This adds a software irq handler for controllers that multiplex
interrupts from multiple devices, but don't know which device generated
the interrupt. For these devices, the irq handler that demuxes must
check every action for every software irq using the same h/w irq in order
to find out which device generated the interrupt. This will inevitably
trigger spurious interrupt detection if we are noting the irq.
The new irq handler does not track the handling for spurious interrupt
detection. An irq that uses this also won't get stats tracked since it
didn't generate the interrupt, nor added to randomness since they are
not random.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: Jon Derrick <jonathan.derrick@intel.com>
Link: http://lkml.kernel.org/r/1466200821-29159-1-git-send-email-keith.busch@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Some IRQ chips may be located in a power domain outside of the CPU
subsystem and hence will require device specific runtime power
management. In order to support such IRQ chips, add a pointer for a
device structure to the irq_chip structure, and if this pointer is
populated by the IRQ chip driver and CONFIG_PM is selected in the kernel
configuration, then the pm_runtime_get/put APIs for this chip will be
called when an IRQ is requested/freed, respectively.
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Export irq_chip_*_parent(), irq_domain_create_hierarchy(),
irq_domain_set_hwirq_and_chip(), irq_domain_reset_irq_data(),
irq_domain_alloc/free_irqs_parent()
So gpio drivers can be built as modules. First user: gpio-xgene-sb
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Phong Vo <pvo@apm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: patches@apm.com
Cc: Loc Ho <lho@apm.com>
Cc: Keyur Chudgar <kchudgar@apm.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Link: https://lists.01.org/pipermail/kbuild-all/2016-February/017914.html
Link: http://lkml.kernel.org/r/1457017012-10628-1-git-send-email-qnguyen@apm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In case of a wakeup interrupt, irq_pm_check_wakeup disables the interrupt
and marks it pending and suspended, disables it and notifies the pm core
about the wake event. The interrupt gets handled later once the system
is resumed.
However the irq stats is updated twice: once when it's disabled waiting
for the system to resume and later when it's handled, resulting in wrong
counting of the wakeup interrupt when waking up the system.
This patch updates the interrupt count so that it's updated only when
the interrupt gets handled. It's already handled correctly in
handle_edge_irq and handle_edge_eoi_irq.
Reported-by: Manoil Claudiu <claudiu.manoil@freescale.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/1446661957-1019-1-git-send-email-sudeep.holla@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If an irq chip does not implement the irq_disable callback, then we
use a lazy approach for disabling the interrupt. That means that the
interrupt is marked disabled, but the interrupt line is not
immediately masked in the interrupt chip. It only becomes masked if
the interrupt is raised while it's marked disabled. We use this to avoid
possibly expensive mask/unmask operations for common case operations.
Unfortunately there are devices which do not allow the interrupt to be
disabled easily at the device level. They are forced to use
disable_irq_nosync(). This can result in taking each interrupt twice.
Instead of enforcing the non lazy mode on all interrupts of a irq
chip, provide a settings flag, which can be set by the driver for that
particular interrupt line.
Reported-and-tested-by: Duc Dang <dhdang@apm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1510092348370.6097@nanos
When a CPU is offlined all interrupts that have an action are migrated to
other still online CPUs. However, if the interrupt has chained handler
installed this is not done. Chained handlers are used by GPIO drivers which
support interrupts, for instance.
When the affinity is not corrected properly we end up in situation where
most interrupts are not arriving to the online CPUs anymore. For example on
Intel Braswell system which has SD-card card detection signal connected to
a GPIO the IO-APIC routing entries look like below after CPU1 is offlined:
pin30, enabled , level, low , V(52), IRR(0), S(0), logical , D(03), M(1)
pin31, enabled , level, low , V(42), IRR(0), S(0), logical , D(03), M(1)
pin32, enabled , level, low , V(62), IRR(0), S(0), logical , D(03), M(1)
pin5b, enabled , level, low , V(72), IRR(0), S(0), logical , D(03), M(1)
The problem here is that the destination mask still contains both CPUs even
if CPU1 is already offline. This means that the IO-APIC still routes
interrupts to the other CPU as well.
We solve the problem by providing a default action for chained interrupts.
This action allows the migration code to correct affinity (as it finds
desc->action != NULL).
Also make the default action handler to emit a warning if for some reason a
chained handler ends up calling it.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Link: http://lkml.kernel.org/r/1444039935-30475-1-git-send-email-mika.westerberg@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.
Remove the argument.
Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
MSI descriptors are per-irq instead of per irqchip, so move it into
struct irq_common_data.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/1433145945-789-35-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Handler data (handler_data) is per-irq instead of per irqchip, so move
it into struct irq_common_data.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/1433145945-789-13-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull irq updates from Thomas Gleixner:
"This updated pull request does not contain the last few GIC related
patches which were reported to cause a regression. There is a fix
available, but I let it breed for a couple of days first.
The irq departement provides:
- new infrastructure to support non PCI based MSI interrupts
- a couple of new irq chip drivers
- the usual pile of fixlets and updates to irq chip drivers
- preparatory changes for removal of the irq argument from interrupt
flow handlers
- preparatory changes to remove IRQF_VALID"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits)
irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources
irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2
irqchip: Add documentation for the bcm2836 interrupt controller
irqchip/bcm2835: Add support for being used as a second level controller
irqchip/bcm2835: Refactor handle_IRQ() calls out of MAKE_HWIRQ
PCI: xilinx: Fix typo in function name
irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance
irqchip/gic: Only allow the primary GIC to set the CPU map
PCI/MSI: pci-xgene-msi: Consolidate chained IRQ handler install/remove
unicore32/irq: Prepare puv3_gpio_handler for irq argument removal
tile/pci_gx: Prepare trio_handle_level_irq for irq argument removal
m68k/irq: Prepare irq handlers for irq argument removal
C6X/megamode-pic: Prepare megamod_irq_cascade for irq argument removal
blackfin: Prepare irq handlers for irq argument removal
arc/irq: Prepare idu_cascade_isr for irq argument removal
sparc/irq: Use access helper irq_data_get_affinity_mask()
sparc/irq: Use helper irq_data_get_irq_handler_data()
parisc/irq: Use access helper irq_data_get_affinity_mask()
mn10300/irq: Use access helper irq_data_get_affinity_mask()
irqchip/i8259: Prepare i8259_irq_dispatch for irq argument removal
...
This helper is required for irq chips which do not implement a
irq_set_type callback and need to call down the irq domain hierarchy
for the actual trigger type change.
This helper is required to fix further wreckage caused by the
conversion of TI OMAP to hierarchical irq domains and therefor tagged
for stable.
[ tglx: Massaged changelog ]
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: <linux@arm.linux.org.uk>
Cc: <nsekhar@ti.com>
Cc: <jason@lakedaemon.net>
Cc: <balbi@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <tony@atomide.com>
Cc: <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-3-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
irq_chip_retrigger_hierarchy() returns -ENOSYS if it was not able to
find at least one .irq_retrigger() callback implemented in the IRQ
domain hierarchy.
That's wrong, because check_irq_resend() expects a 0 return value from
the callback in case that the hardware assisted resend was not
possible. If the return value is non zero the core code assumes
hardware resend success and the software resend is not invoked.
This results in lost interrupts on platforms where none of the parent
irq chips in the hierarchy implements the retrigger callback.
This is observable on TI OMAP, where the hierarchy is:
ARM GIC <- OMAP wakeupgen <- TI Crossbar
Return 0 instead so the software resend mechanism gets invoked.
[ tglx: Massaged changelog ]
Fixes: 85f08c17de ('genirq: Introduce helper functions...')
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: <linux@arm.linux.org.uk>
Cc: <nsekhar@ti.com>
Cc: <jason@lakedaemon.net>
Cc: <balbi@ti.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <tony@atomide.com>
Cc: stable@vger.kernel.org # 4.1
Link: http://lkml.kernel.org/r/1439554830-19502-2-git-send-email-grygorii.strashko@ti.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The following warning is emitted for make xmldocs:
Warning(.//kernel/irq/chip.c:1009): No description found for parameter 'vcpu_info'
Warning(.//kernel/irq/chip.c:1009): Excess function parameter 'dest' description in 'irq_chip_set_vcpu_affinity_parent'
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Link: http://lkml.kernel.org/r/1438164576-5945-1-git-send-email-standby24x7@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Only required for the slow path. Retrieve it from irq descriptor if
necessary.
[ tglx: Split out from combo patch. Left [try_]misrouted_irq()
untouched as there is no win in the slow path ]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: http://lkml.kernel.org/r/1433391238-19471-19-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
It's only required for debug output and can be retrieved from the irq
descriptor if necessary.
[ tglx: Split out from combo patch ]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
