Commit Graph

789 Commits

Author SHA1 Message Date
Tina Ruchandani
9056a23ba1 [media] dvb-frontend: Replace timeval with ktime_t
struct timeval uses a 32-bit seconds representation which will
overflow in the year 2038 and beyond. This patch replaces
the usage of struct timeval with ktime_t which is a 64-bit
timestamp and is year 2038 safe.
This patch is part of a larger attempt to remove all instances
of 32-bit timekeeping variables (timeval, timespec, time_t)
which are not year 2038 safe, from the kernel.

[mchehab@osg.samsung.com: add a missing parenthesis, breaking compilation]
Suggested-by: Arnd Bergmann <arndb@arndb.de>
Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 21:09:51 -03:00
Mauro Carvalho Chehab
0df289a209 [media] dvb: Get rid of typedev usage for enums
The DVB API was originally defined using typedefs. This is against
Kernel CodingStyle, and there's no good usage here. While we can't
remove its usage on userspace, we can avoid its usage in Kernelspace.

So, let's do it.

This patch was generated by this shell script:

	for j in $(grep typedef include/uapi/linux/dvb/frontend.h |cut -d' ' -f 3); do for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f); do sed "s,${j}_t,enum $j," <$i >a && mv a $i; done; done

While here, make CodingStyle fixes on the affected lines.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> # for drivers/media/firewire/*
2015-06-09 17:47:35 -03:00
Antti Palosaari
ab80b19bb9 [media] tda10071: add missing error status when probe() fails
We must return -ENODEV error on case probe() fails to detect chip.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:22:28 -03:00
Dan Carpenter
4347df6a7f [media] m88ds3103: a couple missing error codes
We need to set some error codes here.

Fixes: f01919e8f5 ('[media] m88ds3103: add I2C client binding')

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:20:42 -03:00
Antti Palosaari
b561baec11 [media] a8293: implement I2C client bindings
Implement I2C client bindings.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-06 07:19:47 -03:00
Antti Palosaari
d69abb79e1 [media] tda10071: implement I2C client bindings
Implement I2C client bindings.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-06 07:19:07 -03:00
Mauro Carvalho Chehab
91aff0c5d9 [media] dib0090: Remove a dead code
As reported by smatch:
	drivers/media/dvb-frontends/dib0090.c:1710 dib0090_dc_offset_calibration() warn: missing break? reassigning '*tune_state'

There's no need to change tune_state there, as the fall though code
will change it again to another state. So, simplify it by
removing the dead code.

While here, fix a typo:
	Sart => Start

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-05 11:26:31 -03:00
Mauro Carvalho Chehab
2f60f13c14 [media] drxk: better handle errors
As reported by smatch:
	drivers/media/dvb-frontends/drxk_hard.c:3277 dvbt_sc_command() warn: missing break? reassigning 'status'

This is basically because the error handling logic there was crappy.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-05 07:58:52 -03:00
Antti Palosaari
d2b72f6482 [media] si2168: Implement own I2C adapter locking
We need own I2C locking because of tuner I2C adapter/repeater.
Firmware command is executed using I2C send + reply message. Default
I2C adapter locking protects only single I2C operation, not whole
send + reply sequence as needed. Due to that, it was possible tuner
I2C message interrupts firmware command sequence.

Reported-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Reviewed-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-05 06:32:05 -03:00
Antti Palosaari
f01919e8f5 [media] m88ds3103: add I2C client binding
Implement I2C client device binding.
Wrap media attach to driver I2C probe.
Add wrapper from m88ds3103_attach() to m88ds3103_probe() via driver
core in order to provide proper I2C client for legacy media attach
binding.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-30 12:08:05 -03:00
Antti Palosaari
befa0cc1da [media] m88ds3103: use jiffies when polling DiSEqC TX ready
Use jiffies to set timeout for DiSEqC TX ready polling. Using jiffies
is more elegant solution than looping N times with sleep.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-30 12:06:48 -03:00
Antti Palosaari
ce80d713e3 [media] m88ds3103: implement DVBv5 BER
Implement DVBv5 BER statistics.
Wrap legacy DVBv3 BER to DVBv5 BER.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-30 12:05:55 -03:00
Antti Palosaari
c1daf6511a [media] m88ds3103: implement DVBv5 CNR statistics
Implement DVBv5 CNR statistics.
Wrap legacy DVBv3 SNR to DVBv5 CNR.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-30 12:05:25 -03:00
Antti Palosaari
9240c384f1 [media] m88ds3103: do not return error from get_frontend() when not ready
Do not return error from get_frontend() when status is queried, but
the frontend didn't lock yet. The proper behavior is to only update the
cache after having a lock.

[mchehab@osg.samsung.com: fix the patch description]
Signed-off-by: Antti Palosaari <crope@iki.fi>

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-30 12:04:16 -03:00
Hans Verkuil
edff2bac9d [media] cx24120: fix sparse warning
drivers/media/dvb-frontends/cx24120.c:837:6: warning: symbol 'cx24120_calculate_ber_window' was not declared. Should it be static?

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-30 11:22:14 -03:00
Jemma Denson
bf8de2d38a [media] cx24120: Assume ucb registers is a counter
The ucblocks register is probably a counter and not a rate; assume
it is so and change the calculations as required.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-30 08:12:39 -03:00
Dan Carpenter
e4d131d392 [media] rtl2832_sdr: cleanup some set_bit() calls
This code works fine but static checkers complain.  The test_bit()
function takes the bit number and not a mask.  Then the other issue is
that we were using USB_STATE_URB_BUF which is BIT(0) instead of URB_BUF.
Also we were open coding that instead of using the test/clear/set_bit()
functions.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-20 13:45:15 -03:00
Patrick Boettcher
71df673132 [media] cx24120: fix minor checkpatch-error
Remove multiple blank likes.

Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-20 09:04:02 -03:00
Jemma Denson
c9adafa3b2 [media] cx24120: Update comment & fix typo
These state vars are used for more than just ber calculation, also
fix typo.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-20 09:03:41 -03:00
Jemma Denson
e3f2f63e8c [media] cx24120: Check for lock before updating BER & UCB
BER & UCB aren't available unless we're locked; don't update dvbv5
stats when not locked and mark these counters as unavailable.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-20 09:03:15 -03:00
Jemma Denson
80e9710b34 [media] cx24120: Convert ucblocks to dvbv5 stats
DVBv3 is a legacy API. Drivers should use DVBv5, in order to support
modern applications. So, implement UCB using dvbv5.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-20 09:02:46 -03:00
Jemma Denson
fc44328478 [media] cx24120: Convert read_ber to retrieve from cache
Instead of reading BER again for DVBv3 call, use the value from the cache.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-20 09:02:10 -03:00
Jemma Denson
ddcb252e41 [media] cx24120: Add in dvbv5 stats for bit error rate
DVBv3 is a legacy API. Drivers should use DVBv5, in order to support
modern applications. So, implement BER using dvbv5.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-20 09:00:51 -03:00
Mauro Carvalho Chehab
ec8fe6c925 [media] cx24120: constify static data
Use const on the static data, as gcc may optimize better the
code. Also, would prevent that some code would override the
data there.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
2015-05-20 08:54:41 -03:00
Mauro Carvalho Chehab
5b8bc802e7 [media] cx24120: declare cx24120_init() as static
drivers/media/dvb-frontends/cx24120.c:1182:5: warning: no previous prototype for 'cx24120_init' [-Wmissing-prototypes]
 int cx24120_init(struct dvb_frontend *fe)
     ^

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
2015-05-20 08:54:37 -03:00
Mauro Carvalho Chehab
65b01665a9 [media] cx24120: don't initialize a var that won't be used
As reported by smatch:
drivers/media/dvb-frontends/cx24120.c: In function 'cx24120_message_send':
drivers/media/dvb-frontends/cx24120.c:368:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
  int ret, ficus;
      ^

The values written by cx24120 are never checked. So, remove the
check here too. That's said, the best would be to do the reverse,
but globally: to properly handle the error codes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
2015-05-20 08:54:29 -03:00
Jemma Denson
5c0a1c28c0 [media] cx24120: Complete modfec_table
Add in all the likely values for setting fec on tuning. Some values
yet to be tested but very likely to be correct.
In the very unlikely event that these are wrong tuning with
FEC_AUTO will still work.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-19 08:01:47 -03:00
Jemma Denson
4133601c31 [media] cx24120: More tidying in cx24120_init
Remove reg1 by refactoring for loops
Change ret into an int as it's only used for return values now,
and remove reset_result by using ret instead.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 17:47:49 -03:00
Jemma Denson
1668797d17 [media] cx24120: Tidy cx24120_init
Use reg instead of ret for all calls to readreg, remove ret_EA
as it doesn't need to be a separate var anymore.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 17:47:23 -03:00
Jemma Denson
92443cdb23 [media] cx24120: Remove unneccesary assignments in cx24120_init
Probably a remnant of this driver being reverse engineered,
cx24120_init assigned ret on each call to writereg - they're not
used for anything so remove them to clear up the codebase.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 17:45:58 -03:00
Jemma Denson
2f3f07fbe2 [media] cx24120: Tidy up calls to dev_dbg
Remove __func__ from calls to dev_dbg as dynamic debug can add in
the function name anyway.
Remove debug call in dvbv3 read_signal_strength as userspace has
this value anyway.
Reword some strings to make them simpler / more obvious.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 17:45:34 -03:00
Jemma Denson
3b5eb504fe [media] cx24120: Move CNR to DVBv5 stats
Better to report CNR via DVBv5 stats, as scale can be used.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 17:44:57 -03:00
Jemma Denson
7c95e25e38 [media] cx24120: Fix disecq_send_burst command
Previous version of this driver had a memset before every call
to cmd. This meant the default value of cmd.arg[1] was zero unless
burst is set. Make sure it remains zero.
Also fe_sec_mini_cmd_t is an enum, so test against it.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 17:44:13 -03:00
Jemma Denson
fbdbab7296 [media] cx24120: More coding style fixes
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 17:43:54 -03:00
Jemma Denson
b0cdf1a16f [media] cx24120: Improve cooked signal strength value
Algorithm copied from cx24117.c - it seems to work. Showing 95% on
a signal I know to be somewhere around 74dBuV.

[mchehab@osg.samsung.net: merged two patches, to avoid breaking compilation]
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 16:39:19 -03:00
Jemma Denson
34ce475d32 [media] cx24120: Return DVBv3 signal strength from cache
This patch changes DVBv3 signal strength to read from the cache by
moving the signal strength reading routine into get_stat, and
reducing read_signal_strength to just returning the cached value.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 16:37:41 -03:00
Jemma Denson
1462612cb3 [media] cx24120: Remove additional calls to read_status
get_frontend was making a call to read_status, which is being
called periodically anyway. Have read_status store fe_status in
the state struct instead and use that within get_frontend.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 16:37:16 -03:00
Jemma Denson
d3cf06bbe3 [media] cx24120: Enable DVBv5 signal strength stats
Previous patch added in collection, this patch enables them by
signalling they are available.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 16:36:57 -03:00
Jemma Denson
9fc18f18a5 [media] cx24120: Add DVBv5 signal strength stats
Add new get_stats function, called from read_status, for
collecting DVBv5 stats into the frontend cache. Only signal
strength for now, can add others later.
Not currently marked as available, future patch will enable.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 16:36:38 -03:00
Jemma Denson
c84251bb12 [media] cx24120: Rework vco function to remove xxyyzz variable
Change calculate_vco function to send_vco to tidy up cx24120_init
function.
xxyyzz variable is remnants of a manual div & remainder codepath
to perform a u64 rounded div; replace with kernel macro
DIV_ROUND_CLOSEST_ULL
Hex values provided to the message are mainly variables calculated
within this function, replace with these to remove hardcoding.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 16:36:13 -03:00
Jemma Denson
6ce412292a [media] cx24120: Fix hexdump length in writeregs
msg.len has been ++'d so msg.len is one too many.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 16:35:44 -03:00
Jemma Denson
270e70713b [media] cx24120: Add missing command to cx24120_check_cmd
This patch adds in a missing command to cx24120_check_cmd. This part
of the old reverse engineered driver was quite hard to follow - it's
presumed the compiler did some neat optimisation that wasn't easy to
decode. This command was checked for in that version but not copied
across to the new switch statement.

For reference, old reverse engineered code:
xxzz = cmd->id - 0x11;			// look for specific message id
if ( xxzz <= 0x13 ) {
	msg_cmd_mask = 1 << xxzz;
	//0x0F8021 // if cmd_id 17 or 22 or 33-36, 42, 47, 57-61 etc. disable mpeg output
	if ( msg_cmd_mask & 0x0F8021 ) {	// 000011111000000000100001b
		cx24120_msg_mpeg_output_global_config(state, 0);
		msleep(100);
		state->dvb_s2_mode &=  0xFD;	// reset mpeg out enable flag
	}
}

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 16:35:25 -03:00
Jemma Denson
6138dc2f5f [media] cx24120: Move clock set to read_status
This patch removes the requirement of waiting for tune in
set_frontend by moving the clock set call into read_status

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 16:34:54 -03:00
Jemma Denson
cd20c596b5 [media] cx24120: Fix minor style typo in Kconfig
This patch changes DVB-S/DVB-S2 to the more commonly used
DVB-S/S2 in the description for DVB_CX24120

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 16:34:15 -03:00
Patrick Boettcher
1ff2e8ed28 [media] cx24120: fix strict checkpatch-errors
This patches fixes all checkpatch-errors.
Even the ones created --strict.

Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 16:33:55 -03:00
Patrick Boettcher
2e89a5e085 [media] cx24120: fix codingstyle issue first round
Mauro pointed out some coding style issues in his review.
This patch fixes them.

Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 16:33:18 -03:00
Patrick Boettcher
f7a77ebf08 [media] cx24120: i2c-max-write-size is now configurable
Some i2c-hosts are quite limited regarding maximum
i2c-burst-write-sizes. This patch makes the previously
hardcoded field configurable by users of the driver.

Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 16:32:35 -03:00
Patrick Boettcher
c5fb0f5f54 [media] cx24120: minor checkpatch fixes
This patch fixes printk-related checkpatch warnings. All printks
have been converted to pr_warn or pr_info or pr_err.

Signed-off-by: Patrick.Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 16:32:15 -03:00
Jemma Denson
5afc9a25be [media] Add support for TechniSat Skystar S2
This patch adds support for the Technisat Skystar S2 - this
has been tried before but the cx24120 driver was a bit out of shape
and it didn't got any further:

https://patchwork.linuxtv.org/patch/10575/

It is an old card, but currently being sold off for next to nothing,
so it's proving quite popular of late. Noticing it's quite similar
to the cx24116 and cx24117 I've rewritten the driver in a similar way.

There were a few registers and commands from those drivers
missing from this one I've tested out and found they do something so
they've been added in to speed up tuning and to make get_frontend
return something useful.

Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Patrick.Boettcher <patrick.boettcher@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 16:31:35 -03:00
Antti Palosaari
fc3a0497b9 [media] rtl2832_sdr: add support for fc2580 tuner
Add initial support for fc2580 tuner based devices.
Tuner is controlled via V4L2 subdevice API.
Passes v4l2-compliance tests.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18 15:59:13 -03:00