In cfg80211_inform_bss_frame() wiphy is first dereferenced on privsz
initialisation and then it is checked for NULL. This patch fixes that.
Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This patch moves 'key' dereference after BUG_ON(!key) so that when key is NULL
we will see proper trace instead of oops.
Signed-off-by: Mariusz Kozlowski <mk@lab.zgora.pl>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The ieee80211_key struct can be kfree()d several times in the function, for
example if some of the key setup functions fails beforehand, but there's no
check if the struct is still valid before we call memcpy() and INIT_LIST_HEAD()
on it. In some cases (like it was in my case), if there's missing aes-generic
module it could lead to the following kernel OOPS:
Unable to handle kernel NULL pointer dereference at virtual address 0000018c
....
PC is at memcpy+0x80/0x29c
...
Backtrace:
[<bf11c5e4>] (ieee80211_key_alloc+0x0/0x234 [mac80211]) from [<bf1148b4>] (ieee80211_add_key+0x70/0x12c [mac80211])
[<bf114844>] (ieee80211_add_key+0x0/0x12c [mac80211]) from [<bf070cc0>] (__cfg80211_set_encryption+0x2a8/0x464 [cfg80211])
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
When a client connects in HT mode but does not provide any valid MCS
rates, the function that finds the next sample rate gets stuck in an
infinite loop.
Fix this by falling back to legacy rates if no usable MCS rates are found.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
After commit d5dbda2380 "ethtool: Add
support for vlan accleration.", drivers that have NETIF_F_HW_VLAN_TX,
and/or NETIF_F_HW_VLAN_RX feature, but do not allow enable/disable vlan
acceleration via ethtool set_flags, always return -EINVAL from that
function. Fix by returning -EINVAL only if requested features do not
match current settings and can not be changed by driver.
Change any driver that define ethtool->set_flags to use
ethtool_invalid_flags() to avoid similar problems in the future
(also on drivers that do not have the problem).
Tested with modified (to reproduce this bug) myri10ge driver.
Cc: stable@kernel.org # 2.6.37+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two places in the kernel were doing skb->ip_summed = 0.
Change both to skb->ip_summed = CHECKSUM_NONE, which is more readable.
Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mac address of the bridge device may be changed when a new interface
is added to the bridge. If this happens, then the bridge needs to call
the network notifiers to tickle any other systems that care. Since bridge
can be a module, this also means exporting the notifier function.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current handling of echoed IP timestamp options with prespecified
addresses is rather broken since the 2.2.x kernels. As far as i understand
it, it should behave like when originating packets.
Currently it will only timestamp the next free slot if:
- there is space for *two* timestamps
- some random data from the echoed packet taken as an IP is *not* a local IP
This first is caused by an off-by-one error. 'soffset' points to the next
free slot and so we only need to have 'soffset + 7 <= optlen'.
The second bug is using sptr as the start of the option, when it really is
set to 'skb_network_header(skb)'. I just use dptr instead which points to
the timestamp option.
Finally it would only timestamp for non-local IPs, which we shouldn't do.
So instead we exclude all unicast destinations, similar to what we do in
ip_options_compile().
Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
can_ioctl is the only reason for struct proto to be non-const.
script/check-patch.pl suggests struct proto be const.
Setting the reference to the common can_ioctl() in all CAN protocols directly
removes the need to make the struct proto writable in af_can.c
Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code itself can explain what it is doing, no need these comments.
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define some constant offsets for CALL_REQUEST based on the description
at <http://www.techfest.com/networking/wan/x25plp.htm> and the
definition of ROSE as using 10-digit (5-byte) addresses. Use them
consistently. Validate all implicit and explicit facilities lengths.
Validate the address length byte rather than either trusting or
assuming its value.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
When parsing the FAC_NATIONAL_DIGIS facilities field, it's possible for
a remote host to provide more digipeaters than expected, resulting in
heap corruption. Check against ROSE_MAX_DIGIS to prevent overflows, and
abort facilities parsing on failure.
Additionally, when parsing the FAC_CCITT_DEST_NSAP and
FAC_CCITT_SRC_NSAP facilities fields, a remote host can provide a length
of less than 10, resulting in an underflow in a memcpy size, causing a
kernel panic due to massive heap corruption. A length of greater than
20 results in a stack overflow of the callsign array. Abort facilities
parsing on these invalid length values.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Length fields provided by a peer for names and attributes may be longer
than the destination array sizes. Validate lengths to prevent stack
buffer overflows.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Invalid nicknames containing only spaces will result in an underflow in
a memcpy size calculation, subsequently destroying the heap and
panicking.
v2 also catches the case where the provided nickname is longer than the
buffer size, which can result in controllable heap corruption.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
We clone the child entry in skb_dst_pop before we call
skb_dst_drop(). Otherwise we might kill the child right
before we return it to the caller.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Crypto requests might return asynchronous. In this case we leave
the rcu protected region, so force a refcount on the skb's
destination entry before we enter the xfrm type input/output
handlers.
This fixes a crash when a route is deleted whilst sending IPsec
data that is transformed by an asynchronous algorithm.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits)
route: Take the right src and dst addresses in ip_route_newports
ipv4: Fix nexthop caching wrt. scoping.
ipv4: Invalidate nexthop cache nh_saddr more correctly.
net: fix pch_gbe section mismatch warning
ipv4: fix fib metrics
mlx4_en: Removing HW info from ethtool -i report.
net_sched: fix THROTTLED/RUNNING race
drivers/net/a2065.c: Convert release_resource to release_region/release_mem_region
drivers/net/ariadne.c: Convert release_resource to release_region/release_mem_region
bonding: fix rx_handler locking
myri10ge: fix rmmod crash
mlx4_en: updated driver version to 1.5.4.1
mlx4_en: Using blue flame support
mlx4_core: reserve UARs for userspace consumers
mlx4_core: maintain available field in bitmap allocator
mlx4: Add blue flame support for kernel consumers
mlx4_en: Enabling new steering
mlx4: Add support for promiscuous mode in the new steering model.
mlx4: generalization of multicast steering.
mlx4_en: Reporting HW revision in ethtool -i
...
The "ipv4: Inline fib_semantic_match into check_leaf"
change forgets to return the route errors. check_leaf should
return the same results as fib_table_lookup.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the scope value out of the fib alias entries and into fib_info,
so that we always use the correct scope when recomputing the nexthop
cached source address.
Reported-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Any operation that:
1) Brings up an interface
2) Adds an IP address to an interface
3) Deletes an IP address from an interface
can potentially invalidate the nh_saddr value, requiring
it to be recomputed.
Perform the recomputation lazily using a generation ID.
Reported-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
After we made debugobjects working again, we got the following:
WARNING: at lib/debugobjects.c:262 debug_print_object+0x8e/0xb0()
Hardware name: System Product Name
ODEBUG: free active (active state 0) object type: timer_list hint: hci_cmd_timer+0x0/0x60
Pid: 2125, comm: dmsetup Tainted: G W 2.6.38-06707-gc62b389 #110375
Call Trace:
[<ffffffff8104700a>] warn_slowpath_common+0x7a/0xb0
[<ffffffff810470b6>] warn_slowpath_fmt+0x46/0x50
[<ffffffff812d3a5e>] debug_print_object+0x8e/0xb0
[<ffffffff81bd8810>] ? hci_cmd_timer+0x0/0x60
[<ffffffff812d4685>] debug_check_no_obj_freed+0x125/0x230
[<ffffffff810f1063>] ? check_object+0xb3/0x2b0
[<ffffffff810f3630>] kfree+0x150/0x190
[<ffffffff81be4d06>] ? bt_host_release+0x16/0x20
[<ffffffff81be4d06>] bt_host_release+0x16/0x20
[<ffffffff813a1907>] device_release+0x27/0xa0
[<ffffffff812c519c>] kobject_release+0x4c/0xa0
[<ffffffff812c5150>] ? kobject_release+0x0/0xa0
[<ffffffff812c61f6>] kref_put+0x36/0x70
[<ffffffff812c4d37>] kobject_put+0x27/0x60
[<ffffffff813a21f7>] put_device+0x17/0x20
[<ffffffff81bda4f9>] hci_free_dev+0x29/0x30
[<ffffffff81928be6>] vhci_release+0x36/0x70
[<ffffffff810fb366>] fput+0xd6/0x1f0
[<ffffffff810f8fe6>] filp_close+0x66/0x90
[<ffffffff810f90a9>] sys_close+0x99/0xf0
[<ffffffff81d4c96b>] system_call_fastpath+0x16/0x1b
That timer was introduced with commit 6bd32326cda(Bluetooth: Use
proper timer for hci command timout)
Timer seems to be running when the thing is closed. Removing the timer
unconditionally fixes the problem. And yes, it needs to be fixed
before the HCI_UP check.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Sometimes L2CAP connection remains hanging. Make sure that
L2CAP channel is deleted.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
The code was correctly calling _unlock at the end of the function but
there was no actual _lock call anywhere.
Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
We can't send new commands before a cmd_complete for the HCI_RESET command
shows up.
Reported-by: Mikko Vinni <mmvinni@yahoo.com>
Reported-by: Justin P. Mattock <justinmattock@gmail.com>
Reported-by: Ed Tomlinson <edt@aei.ca>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Tested-by: Justin P. Mattock <justinmattock@gmail.com>
Tested-by: Mikko Vinni <mmvinni@yahoo.com>
Tested-by: Ed Tomlinson <edt@aei.ca>
This patch lets 'l2cap_pinfo.unacked_frames' be incremented only
the first time a frame is transmitted.
Previously it was being incremented for retransmitted packets
too resulting the value to cross the transmit window size.
Signed-off-by: Suraj Sumangala <suraj@atheros.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Alessandro Suardi reported that we could not change route metrics :
ip ro change default .... advmss 1400
This regression came with commit 9c150e82ac (Allocate fib metrics
dynamically). fib_metrics is no longer an array, but a pointer to an
array.
Reported-by: Alessandro Suardi <alessandro.suardi@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Alessandro Suardi <alessandro.suardi@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When sec=<something> is not presented as a mount option,
we should attempt to determine what security flavor the
server is using.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A submount may use different security than the parent
mount does. We should figure out what sec flavor the
submount uses at mount time.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for-2.6.39' of git://linux-nfs.org/~bfields/linux:
SUNRPC: Remove resource leak in svc_rdma_send_error()
nfsd: wrong index used in inner loop
nfsd4: fix comment and remove unused nfsd4_file fields
nfs41: make sure nfs server return right ca_maxresponsesize_cached
nfsd: fix compile error
svcrpc: fix bad argument in unix_domain_find
nfsd4: fix struct file leak
nfsd4: minor nfs4state.c reshuffling
svcrpc: fix rare race on unix_domain creation
nfsd41: modify the members value of nfsd4_op_flags
nfsd: add proc file listing kernel's gss_krb5 enctypes
gss:krb5 only include enctype numbers in gm_upcall_enctypes
NFSD, VFS: Remove dead code in nfsd_rename()
nfsd: kill unused macro definition
locks: use assign_type()
As a preparation for removing ext2 non-atomic bit operations from
asm/bitops.h. This converts ext2 non-atomic bit operations to
little-endian bit operations.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Andy Grover <andy.grover@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
asm-generic/bitops/le.h is only intended to be included directly from
asm-generic/bitops/ext2-non-atomic.h or asm-generic/bitops/minix-le.h
which implements generic ext2 or minix bit operations.
This stops including asm-generic/bitops/le.h directly and use ext2
non-atomic bit operations instead.
It seems odd to use ext2_*_bit() on rds, but it will replaced with
__{set,clear,test}_bit_le() after introducing little endian bit operations
for all architectures. This indirect step is necessary to maintain
bisectability for some architectures which have their own little-endian
bit operations.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Andy Grover <andy.grover@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
commit 2c8cec5c10 (Cache learned PMTU information in inetpeer) added
an extra inet_putpeer() call in ip_rt_update_pmtu().
This results in various problems, since we can free one inetpeer, while
it is still in use.
Ref: http://www.spinics.net/lists/netdev/msg159121.html
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 9435eb1cf0
("ipv4: Implement __ip_dev_find using new interface address hash.")
we reimplemented __ip_dev_find() so that it doesn't have to
do a full FIB table lookup.
Instead, it consults a hash table of addresses configured to
interfaces.
This works identically to the old code in all except one case,
and that is for loopback subnets.
The old code would match the loopback device for any IP address
that falls within a subnet configured to the loopback device.
Handle this corner case by doing the FIB lookup.
We could implement this via inet_addr_onlink() but:
1) Someone could configure many addresses to loopback and
inet_addr_onlink() is a simple list traversal.
2) We know the old code works.
Reported-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the current undo logic, cwnd is moderated after it was restored
to the value prior entering fast-recovery. It was moderated first
in tcp_try_undo_recovery then again in tcp_complete_cwr.
Since the undo indicates recovery was false, these moderations
are not necessary. If the undo is triggered when most of the
outstanding data have been acknowledged, the (restored) cwnd is
falsely pulled down to a small value.
This patch removes these cwnd moderations if cwnd is undone
a) during fast-recovery
b) by receiving DSACKs past fast-recovery
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ipv6_dev_get_saddr() is currently called with an uninitialized
destination address. Although in tests it usually seemed to nevertheless
always fetch the right source address, there seems to be a possible race
condition.
Therefore this commit changes this, first setting the destination
address and only after that fetching the source address.
Reported-by: Jan Beulich <JBeulich@novell.com>
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This avoids explicit cast to avoid 'discards qualifiers'
compiler warning in a netfilter patch that i've been working on.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
ksoftirqd, kworker, migration, and pktgend kthreads can be created with
kthread_create_on_node(), to get proper NUMA affinities for their stack and
task_struct.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
[net/9p]: Introduce basic flow-control for VirtIO transport.
9p: use the updated offset given by generic_write_checks
[net/9p] Don't re-pin pages on retrying virtqueue_add_buf().
[net/9p] Set the condition just before waking up.
[net/9p] unconditional wake_up to proc waiting for space on VirtIO ring
fs/9p: Add v9fs_dentry2v9ses
fs/9p: Attach writeback_fid on first open with WR flag
fs/9p: Open writeback fid in O_SYNC mode
fs/9p: Use truncate_setsize instead of vmtruncate
net/9p: Fix compile warning
net/9p: Convert the in the 9p rpc call path to GFP_NOFS
fs/9p: Fix race in initializing writeback fid
* git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: use watch/notify for changes in rbd header
libceph: add lingering request and watch/notify event framework
rbd: update email address in Documentation
ceph: rename dentry_release -> d_release, fix comment
ceph: add request to the tail of unsafe write list
ceph: remove request from unsafe list if it is canceled/timed out
ceph: move readahead default to fs/ceph from libceph
ceph: add ino32 mount option
ceph: update common header files
ceph: remove debugfs debug cruft
libceph: fix osd request queuing on osdmap updates
ceph: preserve I_COMPLETE across rename
libceph: Fix base64-decoding when input ends in newline.
If we call xs_close(), we're in one of two situations:
- Autoclose, which means we don't expect to resend a request
- bind+connect failed, which probably means the port is in use
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
Recent zerocopy work in the 9P VirtIO transport maps and pins
user buffers into kernel memory for the server to work on them.
Since the user process can initiate this kind of pinning with a simple
read/write call, thousands of IO threads initiated by the user process can
hog the system resources and could result into denial of service.
This patch introduces flow control to avoid that extreme scenario.
The ceiling limit to avoid denial of service attacks is set to relatively
high (nr_free_pagecache_pages()/4) so that it won't interfere with
regular usage, but can step in extreme cases to limit the total system
hang. Since we don't have a global structure to accommodate this variable,
I choose the virtio_chan as the home for this.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Reviewed-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Given that the sprious wake-ups are common, we need to move the
condition setting right next to the wake_up(). After setting the condition
to req->status = REQ_STATUS_RCVD, sprious wakeups may cause the
virtqueue back on the free list for someone else to use.
This may result in kernel panic while relasing the pinned pages
in p9_release_req_pages().
Also rearranged the while loop in req_done() for better redability.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Process may wait to get space on VirtIO ring to send a transaction to
VirtFS server. Current code just does a conditional wake_up() which
means only one process will be woken up even if multiple processes
are waiting.
This fix makes the wake_up unconditional. Hence we won't have any
processes waiting for-ever.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Lingering requests are requests that are sent to the OSD normally but
tracked also after we get a successful request. This keeps the OSD
connection open and resends the original request if the object moves to
another OSD. The OSD can then send notification messages back to us
if another client initiates a notify.
This framework will be used by RBD so that the client gets notification
when a snapshot is created by another node or tool.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
Optimize the calling of fib_add_ifaddr for all
secondary addresses after the promoted one to start from
their place, not from the new place of the promoted
secondary. It will save some CPU cycles because we
are sure the promoted secondary was first for the subnet
and all next secondaries do not change their place.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
The secondary address promotion relies on fib_sync_down_addr
to remove all routes created for the secondary addresses when
the old primary address is deleted. It does not happen for cases
when the primary address is also in another subnet. Fix that
by deleting local and broadcast routes for all secondaries while
they are on device list and by faking that all addresses from
this subnet are to be deleted. It relies on fib_del_ifaddr being
able to ignore the IPs from the concerned subnet while checking
for duplication.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Sidorenko reported for problems with local
routes left after IP addresses are deleted. It happens
when same IPs are used in more than one subnet for the
device.
Fix fib_del_ifaddr to restrict the checks for duplicate
local and broadcast addresses only to the IFAs that use
our primary IFA or another primary IFA with same address.
And we expect the prefsrc to be matched when the routes
are deleted because it is possible they to differ only by
prefsrc. This patch prevents local and broadcast routes
to be leaked until their primary IP is deleted finally
from the box.
As the secondary address promotion needs to delete
the routes for all secondaries that used the old primary IFA,
add option to ignore these secondaries from the checks and
to assume they are already deleted, so that we can safely
delete the route while these IFAs are still on the device list.
Reported-by: Alex Sidorenko <alexandre.sidorenko@hp.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
fib_table_delete forgets to match the routes by prefsrc.
Callers can specify known IP in fc_prefsrc and we should remove
the exact route. This is needed for cases when same local or
broadcast addresses are used in different subnets and the
routes differ only in prefsrc. All callers that do not provide
fc_prefsrc will ignore the route prefsrc as before and will
delete the first occurence. That is how the ip route del default
magic works.
Current callers are:
- ip_rt_ioctl where rtentry_to_fib_config provides fc_prefsrc only
when the provided device name matches IP label with colon.
- inet_rtm_delroute where RTA_PREFSRC is optional too
- fib_magic which deals with routes when deleting addresses
and where the fc_prefsrc is always set with the primary IP
for the concerned IFA.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement compatibility with new hw_features for dev_disable_lro().
This is a transition path - dev_disable_lro() should be later
integrated into netdev_fix_features() after all drivers are converted.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
When I was fixing issues with unregisgtering tables under /proc/sys/net/ipv6/neigh
by adding a mount point it appears I missed a critical ordering issue, in the
ipv6 initialization. I had not realized that ipv6_sysctl_register is called
at the very end of the ipv6 initialization and in particular after we call
neigh_sysctl_register from ndisc_init.
"neigh" needs to be initialized in ipv6_static_sysctl_register which is
the first ipv6 table to initialized, and definitely before ndisc_init.
This removes the weirdness of duplicate tables while still providing a
"neigh" mount point which prevents races in sysctl unregistering.
This was initially reported at https://bugzilla.kernel.org/show_bug.cgi?id=31232
Reported-by: sunkan@zappa.cx
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It was pointed out to me recently that my spelling could be better :)
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The BKL removal in appletalk introduced a use-after-free problem,
where atalk_destroy_socket frees a sock, but we still release
the socket lock on it.
An easy fix is to take an extra reference on the sock and sock_put
it when returning from atalk_release.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit b0d0d915d1 (remove the BKL) added a regression, because
sock_put() can free memory while we are going to use it later.
Fix is to delay sock_put() _after_ release_sock().
Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
A struct used in the l2tp_eth driver for registering network namespace
ops was incorrectly marked as __net_initdata, leading to oops when
module unloaded.
BUG: unable to handle kernel paging request at ffffffffa00ec098
IP: [<ffffffff8123dbd8>] ops_exit_list+0x7/0x4b
PGD 142d067 PUD 1431063 PMD 195da8067 PTE 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/module/l2tp_eth/refcnt
Call Trace:
[<ffffffff8123dc94>] ? unregister_pernet_operations+0x32/0x93
[<ffffffff8123dd20>] ? unregister_pernet_device+0x2b/0x38
[<ffffffff81068b6e>] ? sys_delete_module+0x1b8/0x222
[<ffffffff810c7300>] ? do_munmap+0x254/0x318
[<ffffffff812c64e5>] ? page_fault+0x25/0x30
[<ffffffff812c6952>] ? system_call_fastpath+0x16/0x1b
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we send a request to osd A, and the request's pg remaps to osd B and
then back to A in quick succession, we need to resend the request to A. The
old code was only calling kick_requests after processing all incremental
maps in a message, so it was very possible to not resend a request that
needed to be resent. This would make the osd eventually time out (at least
with the current default of osd timeouts enabled).
The correct approach is to scan requests on every map incremental. This
patch refactors the kick code in a few ways:
- all requests are either on req_lru (in flight), req_unsent (ready to
send), or req_notarget (currently map to no up osd)
- mapping always done by map_request (previous map_osds)
- if the mapping changes, we requeue. requests are resent only after all
map incrementals are processed.
- some osd reset code is moved out of kick_requests into a separate
function
- the "kick this osd" functionality is moved to kick_osd_requests, as it
is unrelated to scanning for request->pg->osd mapping changes
Signed-off-by: Sage Weil <sage@newdream.net>
This field is used to determine the inactivity time. When in AP mode,
hostapd uses it for kicking out inactive clients after a while. Without this
patch, hostapd immediately deauthenticates a new client if it checks the
inactivity time before the client sends its first data frame.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
'buffer' string is copied from userspace. It is not checked whether it is
zero terminated. This may lead to overflow inside of simple_strtoul().
Changli Gao suggested to copy not more than user supplied 'size' bytes.
It was introduced before the git epoch. Files "ipt_CLUSTERIP/*" are
root writable only by default, however, on some setups permissions might be
relaxed to e.g. network admin user.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
commit f3c5c1bfd4 (make ip_tables reentrant) introduced a race in
handling the stackptr restore, at the end of ipt_do_table()
We should do it before the call to xt_info_rdunlock_bh(), or we allow
cpu preemption and another cpu overwrites stackptr of original one.
A second fix is to change the underflow test to check the origptr value
instead of 0 to detect underflow, or else we allow a jump from different
hooks.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The revision of the set type was not checked at the create command: if the
userspace sent a valid set type but with not supported revision number,
it'd create a loop.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
The hash:*port* types with IPv4 silently ignored when address ranges
with non TCP/UDP were added/deleted from the set and used the first
address from the range only.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Whenever we enter the IP stack proper from bridge netfilter we
need to ensure that the skb is in a form the IP stack expects
it to be in.
The entry point on NF_FORWARD did not meet the requirements of
the IP stack, therefore leading to potential crashes/panics.
This patch fixes the problem.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit c95b819ad7 (gre: Use needed_headroom)
made gre use needed_headroom instead of hard_header_len
This uncover a bug in vlan code.
We should make sure vlan devices take into account their
real_dev->needed_headroom or we risk a crash in ipgre_header(), because
we dont have enough room to push IP header in skb.
Reported-by: Diddi Oscarsson <diddi@diddi.se>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This structure was accidentally defined such that its layout can
differ between 32-bit and 64-bit processes. Add compat structure
definitions and an ioctl wrapper function.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: stable@kernel.org [2.6.30+]
Signed-off-by: David S. Miller <davem@davemloft.net>
__ethtool_set_sg does not check if dev->ethtool_ops->set_sg is defined
which can result in a NULL pointer dereference when ethtool is used to
change SG settings for drivers without SG support.
Signed-off-by: Roger Luethi <rl@hellgate.ch>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct aunhdr has 4 padding bytes between 'pad' and 'handle' fields on
x86_64. These bytes are not initialized in the variable 'ah' before
sending 'ah' to the network. This leads to 4 bytes kernel stack
infoleak.
This bug was introduced before the git epoch.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Phil Blundell <philb@gnu.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (47 commits)
doc: CONFIG_UNEVICTABLE_LRU doesn't exist anymore
Update cpuset info & webiste for cgroups
dcdbas: force SMI to happen when expected
arch/arm/Kconfig: remove one to many l's in the word.
asm-generic/user.h: Fix spelling in comment
drm: fix printk typo 'sracth'
Remove one to many n's in a word
Documentation/filesystems/romfs.txt: fixing link to genromfs
drivers:scsi Change printk typo initate -> initiate
serial, pch uart: Remove duplicate inclusion of linux/pci.h header
fs/eventpoll.c: fix spelling
mm: Fix out-of-date comments which refers non-existent functions
drm: Fix printk typo 'failled'
coh901318.c: Change initate to initiate.
mbox-db5500.c Change initate to initiate.
edac: correct i82975x error-info reported
edac: correct i82975x mci initialisation
edac: correct commented info
fs: update comments to point correct document
target: remove duplicate include of target/target_core_device.h from drivers/target/target_core_hba.c
...
Trivial conflict in fs/eventpoll.c (spelling vs addition)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (48 commits)
HID: add support for Logitech Driving Force Pro wheel
HID: hid-ortek: remove spurious reference
HID: add support for Ortek PKB-1700
HID: roccat-koneplus: vorrect mode of sysfs attr 'sensor'
HID: hid-ntrig: init settle and mode check
HID: merge hid-egalax into hid-multitouch
HID: hid-multitouch: Send events per slot if CONTACTCOUNT is missing
HID: ntrig remove if and drop an indent
HID: ACRUX - activate the device immediately after binding
HID: ntrig: apply NO_INIT_REPORTS quirk
HID: hid-magicmouse: Correct touch orientation direction
HID: ntrig don't dereference unclaimed hidinput
HID: Do not create input devices for feature reports
HID: bt hidp: send Output reports using SET_REPORT on the Control channel
HID: hid-sony.c: Fix sending Output reports to the Sixaxis
HID: add support for Keytouch IEC 60945
HID: Add HID Report Descriptor to sysfs
HID: add IRTOUCH infrared USB to hid_have_special_driver
HID: kernel oops in out_cleanup in function hidinput_connect
HID: Add teletext/color keys - gyration remote - EU version (GYAR3101CKDE)
...
* 'nfs-for-2.6.39' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (54 commits)
RPC: killing RPC tasks races fixed
xprt: remove redundant check
SUNRPC: Convert struct rpc_xprt to use atomic_t counters
SUNRPC: Ensure we always run the tk_callback before tk_action
sunrpc: fix printk format warning
xprt: remove redundant null check
nfs: BKL is no longer needed, so remove the include
NFS: Fix a warning in fs/nfs/idmap.c
Cleanup: Factor out some cut-and-paste code.
cleanup: save 60 lines/100 bytes by combining two mostly duplicate functions.
NFS: account direct-io into task io accounting
gss:krb5 only include enctype numbers in gm_upcall_enctypes
RPCRDMA: Fix FRMR registration/invalidate handling.
RPCRDMA: Fix to XDR page base interpretation in marshalling logic.
NFSv4: Send unmapped uid/gids to the server when using auth_sys
NFSv4: Propagate the error NFS4ERR_BADOWNER to nfs4_do_setattr
NFSv4: cleanup idmapper functions to take an nfs_server argument
NFSv4: Send unmapped uid/gids to the server if the idmapper fails
NFSv4: If the server sends us a numeric uid/gid then accept it
NFSv4.1: reject zero layout with zeroed stripe unit
...
We leak the memory allocated to 'ctxt' when we return after
'ib_dma_mapping_error()' returns !=0.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
RPC task RPC_TASK_QUEUED bit is set must be checked before trying to wake up
task rpc_killall_tasks() because task->tk_waitqueue can not be set (equal to
NULL).
Also, as Trond Myklebust mentioned, such approach (instead of checking
tk_waitqueue to NULL) allows us to "optimise away the call to
rpc_wake_up_queued_task() altogether for those
tasks that aren't queued".
Here is an example of dereferencing of tk_waitqueue equal to NULL:
CPU 0 CPU 1 CPU 2
-------------------- --------------------- --------------------------
nfs4_run_open_task
rpc_run_task
rpc_execute
rpc_set_active
rpc_make_runnable
(waiting)
rpc_async_schedule
nfs4_open_prepare
nfs_wait_on_sequence
nfs_umount_begin
rpc_killall_tasks
rpc_wake_up_task
rpc_wake_up_queued_task
spin_lock(tk_waitqueue == NULL)
BUG()
rpc_sleep_on
spin_lock(&q->lock)
__rpc_sleep_on
task->tk_waitqueue = q
Signed-off-by: Stanislav Kinsbursky <skinsbursky@openvz.org>
Cc: stable@kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This fixes a race in which the task->tk_callback() puts the rpc_task
to sleep, setting a new callback. Under certain circumstances, the current
code may end up executing the task->tk_action before it gets round to the
callback.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
* 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
BKL: That's all, folks
fs/locks.c: Remove stale FIXME left over from BKL conversion
ipx: remove the BKL
appletalk: remove the BKL
x25: remove the BKL
ufs: remove the BKL
hpfs: remove the BKL
drivers: remove extraneous includes of smp_lock.h
tracing: don't trace the BKL
adfs: remove the big kernel lock
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1480 commits)
bonding: enable netpoll without checking link status
xfrm: Refcount destination entry on xfrm_lookup
net: introduce rx_handler results and logic around that
bonding: get rid of IFF_SLAVE_INACTIVE netdev->priv_flag
bonding: wrap slave state work
net: get rid of multiple bond-related netdevice->priv_flags
bonding: register slave pointer for rx_handler
be2net: Bump up the version number
be2net: Copyright notice change. Update to Emulex instead of ServerEngines
e1000e: fix kconfig for crc32 dependency
netfilter ebtables: fix xt_AUDIT to work with ebtables
xen network backend driver
bonding: Improve syslog message at device creation time
bonding: Call netif_carrier_off after register_netdevice
bonding: Incorrect TX queue offset
net_sched: fix ip_tos2prio
xfrm: fix __xfrm_route_forward()
be2net: Fix UDP packet detected status in RX compl
Phonet: fix aligned-mode pipe socket buffer header reserve
netxen: support for GbE port settings
...
Fix up conflicts in drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
with the staging updates.
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (76 commits)
pch_uart: reference clock on CM-iTC
pch_phub: add new device ML7213
n_gsm: fix UIH control byte : P bit should be 0
n_gsm: add a documentation
serial: msm_serial_hs: Add MSM high speed UART driver
tty_audit: fix tty_audit_add_data live lock on audit disabled
tty: move cd1865.h to drivers/staging/tty/
Staging: tty: fix build with epca.c driver
pcmcia: synclink_cs: fix prototype for mgslpc_ioctl()
Staging: generic_serial: fix double locking bug
nozomi: don't use flush_scheduled_work()
tty/serial: Relax the device_type restriction from of_serial
MAINTAINERS: Update HVC file patterns
tty: phase out of ioctl file pointer for tty3270 as well
tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile
pch_uart: Fix DMA channel miss-setting issue.
pch_uart: fix exclusive access issue
pch_uart: fix auto flow control miss-setting issue
pch_uart: fix uart clock setting issue
pch_uart : Use dev_xxx not pr_xxx
...
Fix up trivial conflicts in drivers/misc/pch_phub.c (same patch applied
twice, then changes to the same area in one branch)
We return a destination entry without refcount if a socket
policy is found in xfrm_lookup. This triggers a warning on
a negative refcount when freeeing this dst entry. So take
a refcount in this case to fix it.
This refcount was forgotten when xfrm changed to cache bundles
instead of policies for outgoing flows.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows rx_handlers to better signalize what to do next to
it's caller. That makes skb->deliver_no_wcard no longer needed.
kernel-doc for rx_handler_result is taken from Nicolas' patch.
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even though ebtables uses xtables it still requires targets to
return EBT_CONTINUE instead of XT_CONTINUE. This prevented
xt_AUDIT to work as ebt module.
Upon Jan's suggestion, use a separate struct xt_target for
NFPROTO_BRIDGE having its own target callback returning
EBT_CONTINUE instead of cloning the module.
Signed-off-by: Thomas Graf <tgraf@redhat.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (33 commits)
AppArmor: kill unused macros in lsm.c
AppArmor: cleanup generated files correctly
KEYS: Add an iovec version of KEYCTL_INSTANTIATE
KEYS: Add a new keyctl op to reject a key with a specified error code
KEYS: Add a key type op to permit the key description to be vetted
KEYS: Add an RCU payload dereference macro
AppArmor: Cleanup make file to remove cruft and make it easier to read
SELinux: implement the new sb_remount LSM hook
LSM: Pass -o remount options to the LSM
SELinux: Compute SID for the newly created socket
SELinux: Socket retains creator role and MLS attribute
SELinux: Auto-generate security_is_socket_class
TOMOYO: Fix memory leak upon file open.
Revert "selinux: simplify ioctl checking"
selinux: drop unused packet flow permissions
selinux: Fix packet forwarding checks on postrouting
selinux: Fix wrong checks for selinux_policycap_netpeer
selinux: Fix check for xfrm selinux context algorithm
ima: remove unnecessary call to ima_must_measure
IMA: remove IMA imbalance checking
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: (46 commits)
fs/9p: Make the writeback_fid owned by root
fs/9p: Writeback dirty data before setattr
fs/9p: call vmtruncate before setattr 9p opeation
fs/9p: Properly update inode attributes on link
fs/9p: Prevent multiple inclusion of same header
fs/9p: Workaround vfs rename rehash bug
fs/9p: Mark directory inode invalid for many directory inode operations
fs/9p: Add . and .. dentry revalidation flag
fs/9p: mark inode attribute invalid on rename, unlink and setattr
fs/9p: Add support for marking inode attribute invalid
fs/9p: Initialize root inode number for dotl
fs/9p: Update link count correctly on different file system operations
fs/9p: Add drop_inode 9p callback
fs/9p: Add direct IO support in cached mode
fs/9p: Fix inode i_size update in file_write
fs/9p: set default readahead pages in cached mode
fs/9p: Move writeback fid to v9fs_inode
fs/9p: Add v9fs_inode
fs/9p: Don't set stat.st_blocks based on nrpages
fs/9p: Add inode hashing
...
* 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix build failure introduced by s/freezeable/freezable/
workqueue: add system_freezeable_wq
rds/ib: use system_wq instead of rds_ib_fmr_wq
net/9p: replace p9_poll_task with a work
net/9p: use system_wq instead of p9_mux_wq
xfs: convert to alloc_workqueue()
reiserfs: make commit_wq use the default concurrency level
ocfs2: use system_wq instead of ocfs2_quota_wq
ext4: convert to alloc_workqueue()
scsi/scsi_tgt_lib: scsi_tgtd isn't used in memory reclaim path
scsi/be2iscsi,qla2xxx: convert to alloc_workqueue()
misc/iwmc3200top: use system_wq instead of dedicated workqueues
i2o: use alloc_workqueue() instead of create_workqueue()
acpi: kacpi*_wq don't need WQ_MEM_RECLAIM
fs/aio: aio_wq isn't used in memory reclaim path
input/tps6507x-ts: use system_wq instead of dedicated workqueue
cpufreq: use system_wq instead of dedicated workqueues
wireless/ipw2x00: use system_wq instead of dedicated workqueues
arm/omap: use system_wq in mailbox
workqueue: use WQ_MEM_RECLAIM instead of WQ_RESCUER
ECN support incorrectly maps ECN BESTEFFORT packets to TC_PRIO_FILLER
(1) instead of TC_PRIO_BESTEFFORT (0)
This means ECN enabled flows are placed in pfifo_fast/prio low priority
band, giving ECN enabled flows [ECT(0) and CE codepoints] higher drop
probabilities.
This is rather unfortunate, given we would like ECN being more widely
used.
Ref : http://www.coverfire.com/archives/2011/03/13/pfifo_fast-and-ecn/
Signed-off-by: Dan Siemon <dan@coverfire.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Dave Täht <d@taht.net>
Cc: Jonathan Morton <chromatix99@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix printk format build warning:
net/sunrpc/xprtrdma/verbs.c:1463: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'dma_addr_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
'req' is dereferenced before checked for NULL.
The patch simply removes the check.
Signed-off-by: Jinqiu Yang<crindy646@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (57 commits)
tidy the trailing symlinks traversal up
Turn resolution of trailing symlinks iterative everywhere
simplify link_path_walk() tail
Make trailing symlink resolution in path_lookupat() iterative
update nd->inode in __do_follow_link() instead of after do_follow_link()
pull handling of one pathname component into a helper
fs: allow AT_EMPTY_PATH in linkat(), limit that to CAP_DAC_READ_SEARCH
Allow passing O_PATH descriptors via SCM_RIGHTS datagrams
readlinkat(), fchownat() and fstatat() with empty relative pathnames
Allow O_PATH for symlinks
New kind of open files - "location only".
ext4: Copy fs UUID to superblock
ext3: Copy fs UUID to superblock.
vfs: Export file system uuid via /proc/<pid>/mountinfo
unistd.h: Add new syscalls numbers to asm-generic
x86: Add new syscalls for x86_64
x86: Add new syscalls for x86_32
fs: Remove i_nlink check from file system link callback
fs: Don't allow to create hardlink for deleted file
vfs: Add open by file handle support
...
This function should return 0 in case of error, 1 if OK
commit 452edd598f (xfrm: Return dst directly from xfrm_lookup())
got it wrong.
Reported-and-bisected-by: Michael Smith <msmith@cbnco.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the pipe uses aligned-mode data packets, we must reserve 4 bytes
instead of 3 for the pipe protocol header. Otherwise the Phonet header
would not be aligned, resulting in potentially corrupted headers with
later unaligned memory writes.
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel will refuse certain types that do not work in ipv6 mode.
We can then add these features incrementally without risk of userspace
breakage.
Signed-off-by: Florian Westphal <fwestphal@astaro.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Followup patch will add ipv6 support.
ipt_addrtype.h is retained for compatibility reasons, but no longer used
by the kernel.
Signed-off-by: Florian Westphal <fwestphal@astaro.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
It used to return -EINVAL because it thought the end was not aligned
to 4 bytes.
Clean up superfluous src < end test in if, the while itself guarantees
that.
Signed-off-by: Tommi Virtanen <tommi.virtanen@dreamhost.com>
Signed-off-by: Sage Weil <sage@newdream.net>
If a transport prefers payload to be sent separate from the PDU
(P9_TRANS_PREF_PAYLOAD_SEP), there is no need to allocate msize
PDU buffers(struct p9_fcall).
This patch allocates only upto 4k buffers for this kind of transports
and there won't be any change to the legacy transports.
Hence, this patch on top of zero copy changes allows user to
specify higher msizes through the mount option
without hogging the kernel heap.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
This takes care of copying out error buffers from user buffer
payloads when we are using zero copy. This happens because the
only payload buffer the server has to respond to the request is
the user buffer given for the zero copy read.
Because we only use zerocopy when the amount of data to transfer
is greater than a certain size (currently 4K) and error strings are
limited to ERRMAX (currently 128) we don't need to worry about there
being sufficient space for the error to fit in the payload.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Modify p9_client_readdir() to check the transport preference and act according
If the preference is P9_TRANS_PREF_PAYLOAD_SEP, send the payload
separately instead of putting it directly on PDU.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Modify p9_client_write() to check the transport preference and act accordingly.
If the preference is P9_TRANS_PREF_PAYLOAD_SEP, send the payload
separately instead of putting it directly on PDU.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Modify p9_client_read() to check the transport preference and act accordingly.
If the preference is P9_TRANS_PREF_PAYLOAD_SEP, send the payload
separately instead of putting it directly on PDU.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
This patch adds preferences field to the p9_trans_module.
Through this, now transport layer can express its preference about the
payload. i.e if payload neds to be part of the PDU or it prefers it
to be sent sepearetly so that the transport layer can handle it in
a better way.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Modify p9_virtio_request() and req_done() functions to support
additional payload sent down to the transport layer through
tc->pubuf and tc->pkbuf.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
This will be used by the transport layer to determine the out going
request type. Transport layer uses this information to correctly
place the mapped pages in the PDU. Patches following this will make
use of this to achieve zero copy.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
This patch prepares p9_fcall structure for zero copy. Added
fields send the payload buffer information to the transport layer.
In addition it adds a 'private' field for the transport layer to
store mapped/pinned page information so that it can be freed/unpinned
during req_done.
This patch also creates trans_common.[ch] to house helper functions.
It adds the following helper functions.
p9_release_req_pages - Release pages after the transaction.
p9_nr_pages - Return number of pages needed to accomodate the payload.
payload_gup - Translates user buffer into kernel pages.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Structures ip6t_replace, compat_ip6t_replace, and xt_get_revision are
copied from userspace. Fields of these structs that are
zero-terminated strings are not checked. When they are used as argument
to a format string containing "%s" in request_module(), some sensitive
information is leaked to userspace via argument of spawned modprobe
process.
The first bug was introduced before the git epoch; the second was
introduced in 3bc3fe5e (v2.6.25-rc1); the third is introduced by
6b7d31fc (v2.6.15-rc1). To trigger the bug one should have
CAP_NET_ADMIN.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Structures ipt_replace, compat_ipt_replace, and xt_get_revision are
copied from userspace. Fields of these structs that are
zero-terminated strings are not checked. When they are used as argument
to a format string containing "%s" in request_module(), some sensitive
information is leaked to userspace via argument of spawned modprobe
process.
The first and the third bugs were introduced before the git epoch; the
second was introduced in 2722971c (v2.6.17-rc1). To trigger the bug
one should have CAP_NET_ADMIN.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Structures ipt_replace, compat_ipt_replace, and xt_get_revision are
copied from userspace. Fields of these structs that are
zero-terminated strings are not checked. When they are used as argument
to a format string containing "%s" in request_module(), some sensitive
information is leaked to userspace via argument of spawned modprobe
process.
The first bug was introduced before the git epoch; the second is
introduced by 6b7d31fc (v2.6.15-rc1); the third is introduced by
6b7d31fc (v2.6.15-rc1). To trigger the bug one should have
CAP_NET_ADMIN.
Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
A potential race condition when generating connlimit_rnd is also fixed.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
We use the reply tuples when limiting the connections by the destination
addresses, however, in SNAT scenario, the final reply tuples won't be
ready until SNAT is done in POSTROUING or INPUT chain, and the following
nf_conntrack_find_get() in count_tem() will get nothing, so connlimit
can't work as expected.
In this patch, the original tuples are always used, and an additional
member addr is appended to save the address in either end.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Just need to make sure that AF_UNIX garbage collector won't
confuse O_PATHed socket on filesystem for real AF_UNIX opened
socket.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Break out the portions of __ip_vs_control_init() and
__ip_vs_control_cleanup() where aren't necessary when
CONFIG_SYSCTL is undefined.
Signed-off-by: Simon Horman <horms@verge.net.au>
ip_vs_lblc_table and ip_vs_lblcr_table, and code that uses them
are unnecessary when CONFIG_SYSCTL is undefined.
Signed-off-by: Simon Horman <horms@verge.net.au>
Much of ip_vs_leave() is unnecessary if CONFIG_SYSCTL is undefined.
I tried an approach of breaking the now #ifdef'ed portions out
into a separate function. However this appeared to grow the
compiled code on x86_64 by about 200 bytes in the case where
CONFIG_SYSCTL is defined. So I have gone with the simpler though
less elegant #ifdef'ed solution for now.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_lblc{r}_expiration in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_expire_quiescent_template in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_expire_nodest_conn in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_sync_ver in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_sync_threshold in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_nat_icmp_send in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
In preparation for not including sysctl_snat_reroute in
struct netns_ipvs when CONFIG_SYCTL is not defined.
Signed-off-by: Simon Horman <horms@verge.net.au>
Rename ip_vs_new_estimator to ip_vs_start_estimator
and ip_vs_kill_estimator to ip_vs_stop_estimator to better
match their logic.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Move the estimator reading from estimation_timer to user
context. ip_vs_read_estimator() will be used to decode the rate
values. As the decoded rates are not set by estimation timer
there is no need to reset them in ip_vs_zero_stats.
There is no need ip_vs_new_estimator() to encode stats
to rates, if the destination is in trash both the stats and the
rates are inactive.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Currently, the new percpu counters are not zeroed and
the zero commands do not work as expected, we still show the old
sum of percpu values. OTOH, we can not reset the percpu counters
from user context without causing the incrementing to use old
and bogus values.
So, as Eric Dumazet suggested fix that by moving all overhead
to stats reading in user context. Do not introduce overhead in
timer context (estimator) and incrementing (packet handling in
softirqs).
The new ustats0 field holds the zero point for all
counter values, the rates always use 0 as base value as before.
When showing the values to user space just give the difference
between counters and the base values. The only drawback is that
percpu stats are not zeroed, they are accessible only from /proc
and are new interface, so it should not be a compatibility problem
as long as the sum stats are correct after zeroing.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
The global tot_stats contains cpustats field just like the
stats for dest and svc, so better use it to simplify the usage
in estimation_timer. As tot_stats is registered as estimator
we can remove the special ip_vs_read_cpu_stats call for
tot_stats. Fix ip_vs_read_cpu_stats to be called under
stats lock because it is still used as synchronization between
estimation timer and user context (the stats readers).
Also, make sure ip_vs_stats_percpu_show reads properly
the u64 stats from user context.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
The semantic patch that makes this output is available
in scripts/coccinelle/api/memdup.cocci.
More information about semantic patching is available at
http://coccinelle.lip6.fr/
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
ip_vs_read_cpu_stats is called only from timer, so
no need for _bh locks.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Restore the previous behaviour to lookup for fwmark
service only when fwmark is non-null. This saves only CPU.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
HyStart sets the initial exit point of slow start.
Suppose that HyStart exits at 0.5BDP in a BDP network and no history exists.
If the BDP of a network is large, CUBIC's initial cwnd growth may be
too conservative to utilize the link.
CUBIC increases the cwnd 20% per RTT in this case.
Signed-off-by: Sangtae Ha <sangtae.ha@gmail.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make HyStart less sensitive to abrupt delay variations due to buffer bloat.
Signed-off-by: Sangtae Ha <sangtae.ha@gmail.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Reported-by: Lucas Nussbaum <lucas.nussbaum@loria.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a refined version of an earlier patch by Lucas Nussbaum.
Cubic needs RTT values in milliseconds. If HZ < 1000 then
the values will be too coarse.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Reported-by: Lucas Nussbaum <lucas.nussbaum@loria.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
The hystart code was written with assumption that HZ=1000.
Replace the use of jiffies with bictcp_clock as a millisecond
real time clock.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Reported-by: Lucas Nussbaum <lucas.nussbaum@loria.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>