Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currenty pmu driver file for each ppc64 generation processor
has a __init call in itself. Refactor the code by moving the
__init call to core-books.c. This also clean's up compat mode
pmu driver registration.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Use SPDX tag for license]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In power7_marked_instr_event() there is a switch case that is missing
a break or an explicit fallthrough, it's not immediately clear which
it should be.
The function determines based on the PMU event code, whether the event
is a "marked" event (which then requires us to configure the PMU in a
certain way). On Power7 there is no specific bit(s) in the event to
tell us that, we just have to know.
Rather than having a full list of every event and whether they are
marked, we pull apart the event code and for events with certain
values of certain fields we can say that those are all marked events.
We take the psel (bits 0-7) of the event, and look at bits 4-7. For a
value of 6 we say that if the entire psel == 0x64 then if the pmc == 3
the event is marked, else not, and otherwise we continue.
It is then that we fallthrough to the 8 case, where we return true if
the unit == 0xd.
The question is should the 6 case also fallthrough and check for
unit == 0xd, or should it return.
Looking at the full list of events we see that there are zero events
where (psel >> 4) == 0x6 and unit == 0xd.
So the answer is it doesn't really matter, there are no valid event
codes that will return a different result whether we fallthrough or
break.
But equally, testing the 6 case events against unit == 0xd is slightly
bogus, as there are no such events. So to make the code clearer, and
avoid any future confusion, have the 6 case break rather than falling
through.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Squash a bunch of sparse warnings by making things static.
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We used the PME_ prefix earlier to avoid some macro/variable name
collisions. We have since changed the way we define/use the event
macros so we no longer need the prefix.
By dropping the prefix, we keep the the event macros consistent with
their official names.
Reported-by: Michael Ellerman <ellerman@au1.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
To support per-event exclude settings on Power8 we need access to the
struct perf_events in compute_mmcr().
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Power7 supports over 530 different perf events but only a small subset
of these can be specified by name, for the remaining events, we must
specify them by their raw code:
perf stat -e r2003c <application>
This patch makes all the POWER7 events available in sysfs. So we can
instead specify these as:
perf stat -e 'cpu/PM_CMPLU_STALL_DFU/' <application>
where PM_CMPLU_STALL_DFU is the r2003c in previous example.
Before this patch is applied, the size of power7-pmu.o is:
$ size arch/powerpc/perf/power7-pmu.o
text data bss dec hex filename
3073 2720 0 5793 16a1 arch/powerpc/perf/power7-pmu.o
and after the patch is applied, it is:
$ size arch/powerpc/perf/power7-pmu.o
text data bss dec hex filename
15950 31112 0 47062 b7d6 arch/powerpc/perf/power7-pmu.o
For the run time overhead, I use two scripts, one is "event_name.sh",
which contains 50 event names, it looks like:
# ./perf record -e 'cpu/PM_CMPLU_STALL_DFU/' -e ..... /bin/sleep 1
the other one is named "event_code.sh" which use corresponding events
raw
code instead of events names, it looks like:
# ./perf record -e r2003c -e ...... /bin/sleep 1
below is the result.
Using events name:
[root@localhost perf]# time ./event_name.sh
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (~102 samples) ]
real 0m1.192s
user 0m0.028s
sys 0m0.106s
Using events raw code:
[root@localhost perf]# time ./event_code.sh
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.003 MB perf.data (~112 samples) ]
real 0m1.198s
user 0m0.028s
sys 0m0.105s
Signed-off-by: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Cc: icycoder@gmail.com
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Runzhen Wang <runzhew@clemson.edu>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1372407297-6996-3-git-send-email-runzhen@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the Power7 PMU guide:
https://www.power.org/documentation/commonly-used-metrics-for-performance-analysis/
PM_BRU_MPRED is referred to as PM_BR_MPRED.
It fixed the typo by changing the name of the event in kernel and
documentation accordingly.
This patch changes the ABI, there are some reasons I think it's ok:
- It is relatively new interface, specific to the Power7 platform.
- No tools that we know of actually use this interface at this point
(none are listed near the interface).
- Users of this interface (eg oprofile users migrating to perf)
would be more used to the "PM_BR_MPRED" rather than "PM_BRU_MPRED".
- These are in the ABI/testing at this point rather than ABI/stable,
so hoping we have some wiggle room.
Signed-off-by: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Cc: icycoder@gmail.com
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Runzhen Wang <runzhew@clemson.edu>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1372407297-6996-2-git-send-email-runzhen@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A set of Power7 events are often used for Cycles Per Instruction (CPI) stack
analysis. Make these events available in sysfs (/sys/devices/cpu/events/) so
they can be identified using their symbolic names:
perf stat -e 'cpu/PM_CMPLU_STALL_DCACHE_MISS/' /bin/ls
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130406164803.GA408@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create a sysfs entry, '/sys/bus/event_source/devices/cpu/format/event'
which describes the format of the POWER7 PMU events.
This code is based on corresponding code in x86.
Changelog[v4]: [Michael Ellerman, Paul Mckerras] The event format is different
for other POWER cpus. So move the code to POWER7-specific,
power7-pmu.c Also, the POWER7 format uses bits 0-19 not 0-20.
Changelog[v2]: [Jiri Osla] Use PMU_FORMAT_ATTR rather than duplicating code.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Tested-by: Michael Ellerman <michael@ellerman.id.au>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: benh@kernel.crashing.org
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130306054826.GA14627@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make some POWER7-specific perf events available in sysfs.
$ /bin/ls -1 /sys/bus/event_source/devices/cpu/events/
branch-instructions
branch-misses
cache-misses
cache-references
cpu-cycles
instructions
PM_BRU_FIN
PM_BRU_MPRED
PM_CMPLU_STALL
PM_CYC
PM_GCT_NOSLOT_CYC
PM_INST_CMPL
PM_LD_MISS_L1
PM_LD_REF_L1
stalled-cycles-backend
stalled-cycles-frontend
where the 'PM_*' events are POWER specific and the others are the
generic events.
This will enable users to specify these events with their symbolic
names rather than with their raw code.
perf stat -e 'cpu/PM_CYC' ...
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130123062528.GE13720@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the generic perf events in POWER7 available via sysfs.
$ ls /sys/bus/event_source/devices/cpu/events
branch-instructions
branch-misses
cache-misses
cache-references
cpu-cycles
instructions
stalled-cycles-backend
stalled-cycles-frontend
$ cat /sys/bus/event_source/devices/cpu/events/cache-misses
event=0x400f0
This patch is based on commits that implement this functionality on x86.
Eg:
commit a47473939d
Author: Jiri Olsa <jolsa@redhat.com>
Date: Wed Oct 10 14:53:11 2012 +0200
perf/x86: Make hardware event translations available in sysfs
Changelog:[v2]
[Jiri Osla] Drop EVENT_ID() macro since it is only used once.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130123062454.GD13720@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Define and use macros to identify perf events codes This would make it
easier and more readable when these event codes need to be used in more
than one place.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anton Blanchard <anton@au1.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130123062353.GB13720@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we have two cache events that require different settings of the L2SEL
bits in MMCR1 then we can not schedule those events simultaneously. Add
logic to the constraint handling to express that.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
powerpc/perf: Sample only if SIAR-Valid bit is set in P7+
On POWER7+ two new bits (mmcra[35] and mmcra[36]) indicate whether the
contents of SIAR and SDAR are valid.
For marked instructions on P7+, we must save the contents of SIAR and
SDAR registers only if these new bits are set.
This code/check for the SIAR-Valid bit is specific to P7+, so rather than
waste a CPU-feature bit use the PVR flag.
Note that Carl Love proposed a similar change for oprofile:
https://lkml.org/lkml/2012/6/22/309
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The perf code has grown a lot since it started, and is big enough to
warrant its own subdirectory. For reference it's ~60% bigger than the
oprofile code. It declutters the kernel directory, makes it simpler to
grep for "just perf stuff", and allows us to shorten some filenames.
While we're at it, make it more obvious that we have two implementations
of the core perf logic. One for (roughly) Book3S CPUs, which was the
original implementation, and the other for Freescale embedded CPUs.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
