When IRQ affinity is set and the interrupt type is unknown, a cpu
mask allocated within the function is never freed. Fix this memory
leak by allocating memory within the scope where it is used.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When allocating device data, if there's an allocation failure, the
already allocated memory won't be freed such as per-cpu counters.
Fix memory leaks in exception path by creating a common reentrant
clean up function hfi1_clean_devdata() to be used at driver unload
time and device data allocation failure.
To accomplish this, free_platform_config() and clean_up_i2c() are
changed to be reentrant to remove dependencies when they are called
in different order. This helps avoid NULL pointer dereferences
introduced by this patch if those two functions weren't reentrant.
In addition, set dd->int_counter, dd->rcv_limit,
dd->send_schedule and dd->tx_opstats to NULL after they're freed in
hfi1_clean_devdata(), so that hfi1_clean_devdata() is fully reentrant.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When an invalid num_vls is used as a module parameter, the code
execution follows an exception path where the macro dd_dev_err()
expects dd->pcidev->dev not to be NULL in hfi1_init_dd(). This
causes a NULL pointer dereference.
Fix hfi1_init_dd() by initializing dd->pcidev and dd->pcidev->dev
earlier in the code. If a dd exists, then dd->pcidev and
dd->pcidev->dev always exists.
BUG: unable to handle kernel NULL pointer dereference
at 00000000000000f0
IP: __dev_printk+0x15/0x90
Workqueue: events work_for_cpu_fn
RIP: 0010:__dev_printk+0x15/0x90
Call Trace:
dev_err+0x6c/0x90
? hfi1_init_pportdata+0x38d/0x3f0 [hfi1]
hfi1_init_dd+0xdd/0x2530 [hfi1]
? pci_conf1_read+0xb2/0xf0
? pci_read_config_word.part.9+0x64/0x80
? pci_conf1_write+0xb0/0xf0
? pcie_capability_clear_and_set_word+0x57/0x80
init_one+0x141/0x490 [hfi1]
local_pci_probe+0x3f/0xa0
work_for_cpu_fn+0x10/0x20
process_one_work+0x152/0x350
worker_thread+0x1cf/0x3e0
kthread+0xf5/0x130
? max_active_store+0x80/0x80
? kthread_bind+0x10/0x10
? do_syscall_64+0x6e/0x1a0
? SyS_exit_group+0x10/0x10
ret_from_fork+0x35/0x40
Cc: <stable@vger.kernel.org> # 4.9.x
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
AHG may be armed to use the stored header, which by design is limited
to edits in the PSN/A 32 bit word (bth2).
When the code is trying to send a BECN, the use of the stored header
will lose the BECN bit.
Fix by avoiding AHG when getting ready to send a BECN. This is
accomplished by always claiming the packet is not a middle packet which
is an AHG precursor. BECNs are not a normal case and this should not
hurt AHG optimizations.
Cc: <stable@vger.kernel.org> # 4.14.x
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The module parameter num_user_context is defined as 'int' and
defaults to -1. The module_param_named() says that it is uint.
Correct module_param_named() type information and update the modinfo
text to reflect the default value.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The code for handling a marked UD packet unconditionally returns the
dlid in the header of the FECN marked packet. This is not correct
for multicast packets where the DLID is in the multicast range.
The subsequent attempt to send the CNP with the multicast lid will
cause the chip to halt the ack send context because the source
lid doesn't match the chip programming. The send context will
be halted and flush any other pending packets in the pio ring causing
the CNP to not be sent.
A part of investigating the fix, it was determined that the 16B work
broke the FECN routine badly with inconsistent use of 16 bit and 32 bits
types for lids and pkeys. Since the port's source lid was correctly 32
bits the type mixmatches need to be dealt with at the same time as
fixing the CNP header issue.
Fix these issues by:
- Using the ports lid for as the SLID for responding to FECN marked UD
packets
- Insure pkey is always 16 bit in this and subordinate routines
- Insure lids are 32 bits in this and subordinate routines
Cc: <stable@vger.kernel.org> # 4.14.x
Fixes: 88733e3b84 ("IB/hfi1: Add 16B UD support")
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ursula Braun says:
====================
net/smc: fixes 2018/05/03
here are smc fixes for 2 problems:
* receive buffers in SMC must be registered. If registration fails
these buffers must not be kept within the link group for reuse.
Patch 1 is a preparational patch; patch 2 contains the fix.
* sendpage: do not hold the sock lock when calling kernel_sendpage()
or sock_no_sendpage()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The sendpage() call grabs the sock lock before calling the default
implementation - which tries to grab it once again.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com><
Signed-off-by: David S. Miller <davem@davemloft.net>
When smc_wr_reg_send() fails then tag (regerr) the affected buffer and
free it in smc_buf_unuse().
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Consolidate the call to smc_wr_reg_send() in a new function.
No functional changes.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial fix to spelling mistake in DP_NOTICE message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the I2C adapter that the PD controller is attached to
does not support SMBus protocol, the driver needs to handle
block reads separately. The first byte returned in block
read protocol will show the total number of bytes. It needs
to be stripped away.
This is handled separately in the driver only because right
now we have no way of requesting the used protocol with
regmap-i2c. This is in practice a workaround for what is
really a problem in regmap-i2c. The other option would have
been to register custom regmap, or not use regmap at all,
however, since the solution is very simple, I choose to use
it in this case for convenience. It is easy to remove once
we figure out how to handle this kind of cases in
regmap-i2c.
Fixes: 0a4c005bd1 ("usb: typec: driver for TI TPS6598x USB Power Delivery controllers")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ref count for the USB role switch device must be
released after we are done using the switch.
Fixes: c6962c2972 ("usb: typec: tcpm: Set USB role switch to device mode when configured as such")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some non-compliant high-speed USB devices have bulk endpoints with a
1024-byte maxpacket size. Although such endpoints don't work with
xHCI host controllers, they do work with EHCI controllers. We used to
accept these invalid sizes (with a warning), but we no longer do
because of an unintentional change introduced by commit aed9d65ac3
("USB: validate wMaxPacketValue entries in endpoint descriptors").
This patch restores the old behavior, so that people with these
peculiar devices can use them without patching their kernels by hand.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Elvinas <elvinas@veikia.lt>
Fixes: aed9d65ac3 ("USB: validate wMaxPacketValue entries in endpoint descriptors")
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trivial fix to spelling mistake in netdev_err error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=jdZ7
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.17-4' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
"Fix an incorrect warning selection introduced in the last merge
window"
* tag 'dma-mapping-4.17-4' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix inversed DMA_ATTR_NO_WARN test
It looks weird that the stack_trace_filter file can be written by root
but shows that it does not have write permission by ll command.
Link: http://lkml.kernel.org/r/1518054113-28096-1-git-send-email-liuzhengyuan@kylinos.cn
Signed-off-by: Zhengyuan Liu <liuzhengyuan@kylinos.cn>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
KASAN found a use-after-free in xhci_free_virt_device+0x33b/0x38e
where xhci_free_virt_device() sets slot id to 0 if udev exists:
if (dev->udev && dev->udev->slot_id)
dev->udev->slot_id = 0;
dev->udev will be true even if udev is freed because dev->udev is
not set to NULL.
set dev->udev pointer to NULL in xhci_free_dev()
The original patch went to stable so this fix needs to be applied
there as well.
Fixes: a400efe455 ("xhci: zero usb device slot_id member when disabling and freeing a xhci slot")
Cc: <stable@vger.kernel.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The set_graph_function and set_graph_notrace file mode should be 0644
instead of 0444 as they are writeable. Note, the mode appears to be ignored
regardless, but they should at least look sane.
Link: http://lkml.kernel.org/r/1409725869-4501-1-git-send-email-linx.z.chen@intel.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Chen LinX <linx.z.chen@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
After commit bb06ec3145 ("nvme: expand nvmf_check_if_ready checks")
resetting of the loopback nvme target failed as we forgot to switch
it's state to NVME_CTRL_CONNECTING before we reconnect the admin
queues. Therefore the checks in nvmf_check_if_ready() choose to go to
the reject_io case and thus we couldn't sent out an identify
controller command to reconnect.
Change the controller state to NVME_CTRL_CONNECTING after tearing down
the old connection and before re-establishing the connection.
Fixes: bb06ec3145 ("nvme: expand nvmf_check_if_ready checks")
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When CONFIG_NVME_MULTIPATH is set, but we're not using nvme to multipath,
namespaces with multiple paths were not creating unique names due to
reusing the same instance number from the namespace's head.
This patch fixes this by falling back to the non-multipath naming method
when the parameter disabled using multipath.
Reported-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can't allow the user to change multipath settings at runtime, as this
will create naming conflicts due to the different naming schemes used
for each mode.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the command a separate metadata buffer attached, the request needs
to have the integrity flag set so the driver knows to map it.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When specifying same string type option several times,
current option parsing may cause memory leak. Hence,
call kfree for previous one in this case.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
syzbot is reporting use after free bug in debugfs_remove() [1].
This is because fault injection made memory allocation for
debugfs_create_file() from bdi_debug_register() from bdi_register_va()
fail and continued with setting WB_registered. But when debugfs_remove()
is called from debugfs_remove(bdi->debug_dir) from bdi_debug_unregister()
from bdi_unregister() from release_bdi() because WB_registered was set
by bdi_register_va(), IS_ERR_OR_NULL(bdi->debug_dir) == false despite
debugfs_remove(bdi->debug_dir) was already called from bdi_register_va().
Fix this by making IS_ERR_OR_NULL(bdi->debug_dir) == true.
[1] https://syzkaller.appspot.com/bug?id=5ab4efd91a96dcea9b68104f159adf4af2a6dfc1
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+049cb4ae097049dac137@syzkaller.appspotmail.com>
Fixes: 97f0769793 ("bdi: convert bdi_debug_register to int")
Cc: weiping zhang <zhangweiping@didichuxing.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
syzbot is reporting hung tasks at wait_on_bit(WB_shutting_down) in
wb_shutdown() [1]. This seems to be because commit 5318ce7d46 ("bdi:
Shutdown writeback on all cgwbs in cgwb_bdi_destroy()") forgot to call
wake_up_bit(WB_shutting_down) after clear_bit(WB_shutting_down).
Introduce a helper function clear_and_wake_up_bit() and use it, in order
to avoid similar errors in future.
[1] https://syzkaller.appspot.com/bug?id=b297474817af98d5796bc544e1bb806fc3da0e5e
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+c0cf869505e03bdf1a24@syzkaller.appspotmail.com>
Fixes: 5318ce7d46 ("bdi: Shutdown writeback on all cgwbs in cgwb_bdi_destroy()")
Cc: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The USB_DEVICE_INTERFACE_NUMBER matching macro assumes that
the { vendorid, productid, interfacenumber } set uniquely
identifies one specific function. This has proven to fail
for some configurable devices. One example is the Quectel
EM06/EP06 where the same interface number can be either
QMI or MBIM, without the device ID changing either.
Fix by requiring the vendor-specific class for interface number
based matching. Functions of other classes can and should use
class based matching instead.
Fixes: 03304bcb5e ("net: qmi_wwan: use fixed interface number matching")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
We get a build error when compiling the iommu driver without CONFIG_OF:
drivers/iommu/rockchip-iommu.c: In function 'rk_iommu_of_xlate':
drivers/iommu/rockchip-iommu.c:1101:2: error: implicit declaration of function 'of_dev_put'; did you mean 'of_node_put'? [-Werror=implicit-function-declaration]
This replaces the of_dev_put() with the equivalent
platform_device_put().
Fixes: 5fd577c3ea ("iommu/rockchip: Use OF_IOMMU to attach devices automatically")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It is possible that multiple I/O requests hits on failed cache device or
backing device, therefore it is quite common that CACHE_SET_IO_DISABLE is
set already when a task tries to set the bit from bch_cache_set_error().
Currently the message "CACHE_SET_IO_DISABLE already set" is printed by
pr_warn(), which might mislead users to think a serious fault happens in
source code.
This patch uses pr_info() to print the information in such situation,
avoid extra worries. This information is helpful to understand bcache
behavior in cache device failures, so I still keep them in source code.
Fixes: 771f393e8f ("bcache: add CACHE_SET_IO_DISABLE to struct cache_set flags")
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 7e027ca4b5 ("bcache: add stop_when_cache_set_failed option to
backing device") adds stop_when_cache_set_failed option and stops bcache
device if stop_when_cache_set_failed is auto and there is dirty data on
broken cache device. There might exists a small time gap that the cache
set is released and set to NULL but bcache device is not released yet
(because they are released in parallel). During this time gap, dc->c is
NULL so CACHE_SET_IO_DISABLE won't be checked, and dc->io_disable is still
false, so new coming I/O requests will be accepted and directly go into
backing device as no cache set attached to. If there is dirty data on
cache device, this behavior may introduce potential inconsistent data.
This patch sets dc->io_disable to true before calling bcache_device_stop()
to make sure the backing device will reject new coming I/O request as
well, so even in the small time gap no I/O will directly go into backing
device to corrupt data consistency.
Fixes: 7e027ca4b5 ("bcache: add stop_when_cache_set_failed option to backing device")
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit c7b7bd0740 ("bcache: add io_disable to struct cached_dev")
counts backing device I/O requets and set dc->io_disable to true if error
counters exceeds dc->io_error_limit. But it only counts I/O errors for
regular I/O request, neglects errors of write back I/Os when backing device
is offline.
This patch counts the errors of writeback I/Os, in dirty_endio() if
bio->bi_status is not 0, it means error happens when writing dirty keys
to backing device, then bch_count_backing_io_errors() is called.
By this fix, even there is no reqular I/O request coming, if writeback I/O
errors exceed dc->io_error_limit, the bcache device may still be stopped
for the broken backing device.
Fixes: c7b7bd0740 ("bcache: add io_disable to struct cached_dev")
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit c7b7bd0740 ("bcache: add io_disable to struct cached_dev") tries
to stop bcache device by calling bcache_device_stop() when too many I/O
errors happened on backing device. But if there is internal I/O happening
on cache device (writeback scan, garbage collection, etc), a regular I/O
request triggers the internal I/Os may still holds a refcount of dc->count,
and the refcount may only be dropped after the internal I/O stopped.
By this patch, bch_cached_dev_error() will check if the backing device is
attached to a cache set, if yes that CACHE_SET_IO_DISABLE will be set to
flags of this cache set. Then internal I/Os on cache device will be
rejected and stopped immediately, and the bcache device can be stopped.
For people who are not familiar with the interesting refcount dependance,
let me explain a bit more how the fix works. Example the writeback thread
will scan cache device for dirty data writeback purpose. Before it stopps,
it holds a refcount of dc->count. When CACHE_SET_IO_DISABLE bit is set,
the internal I/O will stopped and the while-loop in bch_writeback_thread()
quits and calls cached_dev_put() to drop dc->count. If this is the last
refcount to drop, then cached_dev_detach_finish() will be called. In this
call back function, in turn closure_put(dc->disk.cl) is called to drop a
refcount of closure dc->disk.cl. If this is the last refcount of this
closure to drop, then cached_dev_flush() will be called. Then the cached
device is freed. So if CACHE_SET_IO_DISABLE is not set, the bache device
can not be stopped until all inernal cache device I/O stopped. For large
size cache device, and writeback thread competes locks with gc thread,
there might be a quite long time to wait.
Fixes: c7b7bd0740 ("bcache: add io_disable to struct cached_dev")
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current code uses bdevname() or bio_devname() to reference gendisk
disk name when bcache needs to display the disk names in kernel message.
It was safe before bcache device failure handling patch set merged in,
because when devices are failed, there was deadlock to prevent bcache
printing error messages with gendisk disk name. But after the failure
handling patch set merged, the deadlock is fixed, so it is possible
that the gendisk structure bdev->hd_disk is released when bdevname() is
called to reference bdev->bd_disk->disk_name[]. This is why I receive
bug report of NULL pointers deference panic.
This patch stores gendisk disk name in a buffer inside struct cache and
struct cached_dev, then print out the offline device name won't reference
bdev->hd_disk anymore. And this patch also avoids extra function calls
of bdevname() and bio_devnmae().
Changelog:
v3, add Reviewed-by from Hannes.
v2, call bdevname() earlier in register_bdev()
v1, first version with segguestion from Junhui Tang.
Fixes: c7b7bd0740 ("bcache: add io_disable to struct cached_dev")
Fixes: 5138ac6748 ("bcache: fix misleading error message in bch_count_io_errors()")
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This pretty much reverts commit 273df96353 ("iommu/dma: Make PCI
window reservation generic") by moving the PCI window region
reservation back into the dma specific path so that these regions
doesn't get exposed via the IOMMU API interface. With this change,
the vfio interface will report only iommu specific reserved regions
to the user space.
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Fixes: 273df96353 ('iommu/dma: Make PCI window reservation generic')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu clocks are optional, so the driver should not fail if they are not
present. Instead just set the number of clocks to 0, which the clk-blk APIs
can handle just fine.
Fixes: f2e3a5f557 ("iommu/rockchip: Control clocks needed to access the IOMMU")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The newly introduced lock is only used when CONFIG_IRQ_REMAP is enabled:
drivers/iommu/amd_iommu.c:86:24: error: 'iommu_table_lock' defined but not used [-Werror=unused-variable]
static DEFINE_SPINLOCK(iommu_table_lock);
This moves the definition next to the user, within the #ifdef protected
section of the file.
Fixes: ea6166f4b8 ("iommu/amd: Split irq_lookup_table out of the amd_iommu_devtable_lock")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It was noticed that the IRTE configured for guest OS kernel
was over-written while the guest was running. As a result,
vt-d Posted Interrupts configured for the guest are not being
delivered directly, and instead bounces off the host. Every
interrupt delivery takes a VM Exit.
It was noticed that the following stack is doing the over-write:
[ 147.463177] modify_irte+0x171/0x1f0
[ 147.463405] intel_ir_set_affinity+0x5c/0x80
[ 147.463641] msi_domain_set_affinity+0x32/0x90
[ 147.463881] irq_do_set_affinity+0x37/0xd0
[ 147.464125] irq_set_affinity_locked+0x9d/0xb0
[ 147.464374] __irq_set_affinity+0x42/0x70
[ 147.464627] write_irq_affinity.isra.5+0xe1/0x110
[ 147.464895] proc_reg_write+0x38/0x70
[ 147.465150] __vfs_write+0x36/0x180
[ 147.465408] ? handle_mm_fault+0xdf/0x200
[ 147.465671] ? _cond_resched+0x15/0x30
[ 147.465936] vfs_write+0xad/0x1a0
[ 147.466204] SyS_write+0x52/0xc0
[ 147.466472] do_syscall_64+0x74/0x1a0
[ 147.466744] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
reversing the sense of force check in intel_ir_reconfigure_irte()
restores proper posted interrupt functionality
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Fixes: d491bdff88 ('iommu/vt-d: Reevaluate vector configuration on activate()')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- Tracepoints should not give warning on OOM failures
- Use special field for function pointer in trace event
- Fix igrab issues in uprobes
- Fixes to the new histogram triggers
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWuoYdBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtFnAP9X4+AVDQH0VfsMLSc9D+rK6WmcRIhv
q8J2gNPv3anM+AD/SFXWGO4ihN+0KDw/TqmJxESNEybq47vTZ/s5lM6A4gQ=
=fQbj
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fixes in tracing:
- Tracepoints should not give warning on OOM failures
- Use special field for function pointer in trace event
- Fix igrab issues in uprobes
- Fixes to the new histogram triggers"
* tag 'trace-v4.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracepoint: Do not warn on ENOMEM
tracing: Add field modifier parsing hist error for hist triggers
tracing: Add field parsing hist error for hist triggers
tracing: Restore proper field flag printing when displaying triggers
tracing: initcall: Ordered comparison of function pointers
tracing: Remove igrab() iput() call from uprobes.c
tracing: Fix bad use of igrab in trace_uprobe.c
Pull input updates from Dmitry Torokhov:
"Just a few driver fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: atmel_mxt_ts - add missing compatible strings to OF device table
Input: atmel_mxt_ts - fix the firmware update
Input: atmel_mxt_ts - add touchpad button mapping for Samsung Chromebook Pro
MAINTAINERS: Rakesh Iyer can't be reached anymore
Input: hideep_ts - fix a typo in Kconfig
Input: alps - fix reporting pressure of v3 trackstick
Input: leds - fix out of bound access
Input: synaptics-rmi4 - fix an unchecked out of memory error path
Allow some non-cached routes to use non-expired fnhe:
1. ip_del_fnhe: moved above and now called by find_exception.
The 4.5+ commit deed49df73 expires fnhe only when caching
routes. Change that to:
1.1. use fnhe for non-cached local output routes, with the help
from (2)
1.2. allow __mkroute_input to detect expired fnhe (outdated
fnhe_gw, for example) when do_cache is false, eg. when itag!=0
for unicast destinations.
2. __mkroute_output: keep fi to allow local routes with orig_oif != 0
to use fnhe info even when the new route will not be cached into fnhe.
After commit 839da4d989 ("net: ipv4: set orig_oif based on fib
result for local traffic") it means all local routes will be affected
because they are not cached. This change is used to solve a PMTU
problem with IPVS (and probably Netfilter DNAT) setups that redirect
local clients from target local IP (local route to Virtual IP)
to new remote IP target, eg. IPVS TUN real server. Loopback has
64K MTU and we need to create fnhe on the local route that will
keep the reduced PMTU for the Virtual IP. Without this change
fnhe_pmtu is updated from ICMP but never exposed to non-cached
local routes. This includes routes with flowi4_oif!=0 for 4.6+ and
with flowi4_oif=any for 4.14+).
3. update_or_create_fnhe: make sure fnhe_expires is not 0 for
new entries
Fixes: 839da4d989 ("net: ipv4: set orig_oif based on fib result for local traffic")
Fixes: d6d5e999e5 ("route: do not cache fib route info on local routes with oif")
Fixes: deed49df73 ("route: check and remove route cache when we get route")
Cc: David Ahern <dsahern@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Three small bug fixes: an illegally overlapping memcmp in target code,
a potential infinite loop in isci under certain rare phy conditions
and an ATA queue depth (performance) correction for storvsc.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWunNPiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdyJAQDGWGGN
i5BJOr1c8BNEMHHuJIYvpgNJDLQd5tfqxieZgAD/e1RQn1nIjxnoIrduOAP+so8u
XvGtP79yTO2yxz7VP48=
=HASg
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small bug fixes: an illegally overlapping memcmp in target code,
a potential infinite loop in isci under certain rare phy conditions
and an ATA queue depth (performance) correction for storvsc"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: Fix fortify_panic kernel exception
scsi: isci: Fix infinite loop in while loop
scsi: storvsc: Set up correct queue depth values for IDE devices
vga-dac: Fix edid memory leak (Sean)
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Sean Paul <seanpaul@chromium.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlrqFqcACgkQlvcN/ahK
BwraMwf+PppfIRNcyvUU3iPu6WiaodD9qOdt55AU6WK8SmEJ0Bk+10XNFjYHXOrA
b/zUo6g7Zru+sneLKhZGwpGkBQ1IcuwichpQGd+OvknT2U8Ee8IwEZib7g9Vpqoi
np4PWKMRI1/XWlCOHvkY6fAV7uVDWjkRKDmeUmpTRaWBQdq/QVAzk1z0hUW93mSY
RqZZTNZBXPsuwW+wIdAIDlm5PSvYBbgEa2HVj44iK4PB7SlI5jGMtjbQpcbmmT20
V4RvvLPeRBCizA5LiSu+HspRCvtBZfSHt5nRqONc11bmK0DjiZt8tBSsbHEUHEt6
ySDjbjk2RVwVAE5wV3Z7xKT1CQOBZg==
=yyCu
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2018-05-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
vc4: Fix bo refcounts during async commits (Boris)
vga-dac: Fix edid memory leak (Sean)
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Sean Paul <seanpaul@chromium.org>
* tag 'drm-misc-fixes-2018-05-02' of git://anongit.freedesktop.org/drm/drm-misc:
drm/bridge: vga-dac: Fix edid memory leak
drm/vc4: Make sure vc4_bo_{inc,dec}_usecnt() calls are balanced
Add DMC firmware for Geminilake.
* tag 'drm-intel-fixes-2018-05-02' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915/glk: Add MODULE_FIRMWARE for Geminilake
Daniel Borkmann says:
====================
pull-request: bpf 2018-05-03
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Several BPF sockmap fixes mostly related to bugs in error path
handling, that is, a bug in updating the scatterlist length /
offset accounting, a missing sk_mem_uncharge() in redirect
error handling, and a bug where the outstanding bytes counter
sg_size was not zeroed, from John.
2) Fix two memory leaks in the x86-64 BPF JIT, one in an error
path where we still don't converge after image was allocated
and another one where BPF calls are used and JIT passes don't
converge, from Daniel.
3) Minor fix in BPF selftests where in test_stacktrace_build_id()
we drop useless args in urandom_read and we need to add a missing
newline in a CHECK() error message, from Song.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
