The "cpu" argument to rcu_cleanup_after_idle() is always the current
CPU, so drop it. This moves the smp_processor_id() from the caller to
rcu_cleanup_after_idle(), saving argument-passing overhead. Again,
the anticipated cross-CPU uses of these functions has been replaced
by NO_HZ_FULL.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
The "cpu" argument to rcu_prepare_for_idle() is always the current
CPU, so drop it. This in turn allows two of the uses of "cpu" in
this function to be replaced with a this_cpu_ptr() and the third by
smp_processor_id(), replacing that of the call to rcu_prepare_for_idle().
Again, the anticipated cross-CPU uses of these functions has been replaced
by NO_HZ_FULL.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
The "cpu" argument to rcu_needs_cpu() is always the current CPU, so drop
it. This in turn allows the "cpu" argument to rcu_cpu_has_callbacks()
to be removed, which allows the uses of "cpu" in both functions to be
replaced with a this_cpu_ptr(). Again, the anticipated cross-CPU uses
of these functions has been replaced by NO_HZ_FULL.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
The "cpu" argument to rcu_note_context_switch() is always the current
CPU, so drop it. This in turn allows the "cpu" argument to
rcu_preempt_note_context_switch() to be removed, which allows the sole
use of "cpu" in both functions to be replaced with a this_cpu_ptr().
Again, the anticipated cross-CPU uses of these functions has been
replaced by NO_HZ_FULL.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Because rcu_preempt_check_callbacks()'s argument is guaranteed to
always be the current CPU, drop the argument and replace per_cpu()
with __this_cpu_read().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
For some functions in kernel/rcu/tree* the rdtp parameter is always
this_cpu_ptr(rdtp). Remove the parameter if constant and calculate the
pointer in function.
This will have the advantage that it is obvious that the address are
all per cpu offsets and thus it will enable the use of this_cpu_ops in
the future.
Signed-off-by: Christoph Lameter <cl@linux.com>
[ paulmck: Forward-ported to rcu/dev, whitespace adjustment. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Commit 35ce7f29a4 (rcu: Create rcuo kthreads only for onlined CPUs)
avoids creating rcuo kthreads for CPUs that never come online. This
fixes a bug in many instances of firmware: Instead of lying about their
age, these systems instead lie about the number of CPUs that they have.
Before commit 35ce7f29a4, this could result in huge numbers of useless
rcuo kthreads being created.
It appears that experience indicates that I should have told the
people suffering from this problem to fix their broken firmware, but
I instead produced what turned out to be a partial fix. The missing
piece supplied by this commit makes sure that rcu_barrier() knows not to
post callbacks for no-CBs CPUs that have not yet come online, because
otherwise rcu_barrier() will hang on systems having firmware that lies
about the number of CPUs.
It is tempting to simply have rcu_barrier() refuse to post a callback on
any no-CBs CPU that does not have an rcuo kthread. This unfortunately
does not work because rcu_barrier() is required to wait for all pending
callbacks. It is therefore required to wait even for those callbacks
that cannot possibly be invoked. Even if doing so hangs the system.
Given that posting a callback to a no-CBs CPU that does not yet have an
rcuo kthread can hang rcu_barrier(), It is tempting to report an error
in this case. Unfortunately, this will result in false positives at
boot time, when it is perfectly legal to post callbacks to the boot CPU
before the scheduler has started, in other words, before it is legal
to invoke rcu_barrier().
So this commit instead has rcu_barrier() avoid posting callbacks to
CPUs having neither rcuo kthread nor pending callbacks, and has it
complain bitterly if it finds CPUs having no rcuo kthread but some
pending callbacks. And when rcu_barrier() does find CPUs having no rcuo
kthread but pending callbacks, as noted earlier, it has no choice but
to hang indefinitely.
Reported-by: Yanko Kaneti <yaneti@declera.com>
Reported-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Eric B Munson <emunson@akamai.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Eric B Munson <emunson@akamai.com>
Tested-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Tested-by: Yanko Kaneti <yaneti@declera.com>
Tested-by: Kevin Fenzi <kevin@scrye.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Currently, the expedited grace-period primitives do get_online_cpus().
This greatly simplifies their implementation, but means that calls
to them holding locks that are acquired by CPU-hotplug notifiers (to
say nothing of calls to these primitives from CPU-hotplug notifiers)
can deadlock. But this is starting to become inconvenient, as can be
seen here: https://lkml.org/lkml/2014/8/5/754. The problem in this
case is that some developers need to acquire a mutex from a CPU-hotplug
notifier, but also need to hold it across a synchronize_rcu_expedited().
As noted above, this currently results in deadlock.
This commit avoids the deadlock and retains the simplicity by creating
a try_get_online_cpus(), which returns false if the get_online_cpus()
reference count could not immediately be incremented. If a call to
try_get_online_cpus() returns true, the expedited primitives operate as
before. If a call returns false, the expedited primitives fall back to
normal grace-period operations. This falling back of course results in
increased grace-period latency, but only during times when CPU hotplug
operations are actually in flight. The effect should therefore be
negligible during normal operation.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Tested-by: Lan Tianyu <tianyu.lan@intel.com>
The NOCB follower wakeup ordering depends on the store to the tail
pointer happening before the wakeup. However, because atomic_long_add()
does not return a value, it does not provide ordering guarantees, and
the locking in wake_up() only guarantees that the store will happen
before the unlock, which might be too late. Even though this is only a
theoretical issue, this commit adds a smp_mb__after_atomic() after the
final atomic_long_add() to provide the needed ordering guarantee.
Reported-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
If an RCU callback is queued on a no-CBs CPU from idle code with irqs
disabled, and if that CPU stays idle forever after, the callback will
never be invoked. This commit therefore adds a check for this situation
in ____call_rcu_nocb(), invoking the RCU core solely for the purpose
of the ensuing return-to-idle transition. (If the CPU doesn't return
to idle, the next scheduling-clock interrupt will fix things up.)
Reported-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
The NOCB leader wakeup ordering depends on the store to the header
happening before the check for the leader already being awake. However,
because atomic_long_add() does not return a value, it does not provide
ordering guarantees, the incorrect comment in wake_nocb_leader()
notwithstanding. This commit therefore adds a smp_mb__after_atomic()
after the final atomic_long_add() to provide the needed ordering
guarantee.
Reported-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
If there are no nohz_full= CPUs, then there is currently no reason to
track sysidle state. This commit therefore short-circuits this state
tracking if !tick_nohz_full_enabled().
Note that these checks will need to be revisited if nohz_full= state
can ever be changed at runtime.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Now that we have rcu_state_p, which references rcu_preempt_state for
TREE_PREEMPT_RCU and rcu_sched_state for TREE_RCU, we don't need a
separate rcu_sysidle_state variable. This commit therefore eliminates
rcu_preempt_state in favor of rcu_state_p.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
If we configure a kernel with CONFIG_NOCB_CPU=y, CONFIG_RCU_NOCB_CPU_NONE=y and
CONFIG_CPUMASK_OFFSTACK=n and do not pass in a rcu_nocb= boot parameter, the
cpumask rcu_nocb_mask can be garbage instead of NULL.
Hence this commit replaces checks for rcu_nocb_mask == NULL with a check for
have_rcu_nocb_mask.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
RCU currently uses for_each_possible_cpu() to spawn rcuo kthreads,
which can result in more rcuo kthreads than one would expect, for
example, derRichard reported 64 CPUs worth of rcuo kthreads on an
8-CPU image. This commit therefore creates rcuo kthreads only for
those CPUs that actually come online.
This was reported by derRichard on the OFTC IRC network.
Reported-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Currently, RCU spawns kthreads from several different early_initcall()
functions. Although this has served RCU well for quite some time,
as more kthreads are added a more deterministic approach is required.
This commit therefore causes all of RCU's early-boot kthreads to be
spawned from a single early_initcall() function.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Return false instead of 0 in rcu_nocb_adopt_orphan_cbs() as this has
bool as return type.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Return false instead of 0 in __call_rcu_nocb() as this has bool as
return type.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Return true/false in rcu_nocb_adopt_orphan_cbs() instead of 0/1 as
this function has return type of bool.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Return true/false instead of 0/1 in __call_rcu_nocb() as this returns a
bool type.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
This commit checks the return value of the zalloc_cpumask_var() used for
allocating cpumask for rcu_nocb_mask.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Commit b58cc46c5f (rcu: Don't offload callbacks unless specifically
requested) failed to adjust the callback lists of the CPUs that are
known to be no-CBs CPUs only because they are also nohz_full= CPUs.
This failure can result in callbacks that are posted during early boot
getting stranded on nxtlist for CPUs whose no-CBs property becomes
apparent late, and there can also be spurious warnings about offline
CPUs posting callbacks.
This commit fixes these problems by adding an early-boot rcu_init_nohz()
that properly initializes the no-CBs CPUs.
Note that kernels built with CONFIG_RCU_NOCB_CPU_ALL=y or with
CONFIG_RCU_NOCB_CPU=n do not exhibit this bug. Neither do kernels
booted without the nohz_full= boot parameter.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
The rcu_bh_qs(), rcu_preempt_qs(), and rcu_sched_qs() functions use
old-style per-CPU variable access and write to ->passed_quiesce even
if it is already set. This commit therefore updates to use the new-style
per-CPU variable access functions and avoids the spurious writes.
This commit also eliminates the "cpu" argument to these functions because
they are always invoked on the indicated CPU.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_preempt_note_context_switch() function is on a scheduling fast
path, so it would be good to avoid disabling irqs. The reason that irqs
are disabled is to synchronize process-level and irq-handler access to
the task_struct ->rcu_read_unlock_special bitmask. This commit therefore
makes ->rcu_read_unlock_special instead be a union of bools with a short
allowing single-access checks in RCU's __rcu_read_unlock(). This results
in the process-level and irq-handler accesses being simple loads and
stores, so that irqs need no longer be disabled. This commit therefore
removes the irq disabling from rcu_preempt_note_context_switch().
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently TASKS_RCU would ignore a CPU running a task in nohz_full=
usermode execution. There would be neither a context switch nor a
scheduling-clock interrupt to tell TASKS_RCU that the task in question
had passed through a quiescent state. The grace period would therefore
extend indefinitely. This commit therefore makes RCU's dyntick-idle
subsystem record the task_struct structure of the task that is running
in dyntick-idle mode on each CPU. The TASKS_RCU grace period can
then access this information and record a quiescent state on
behalf of any CPU running in dyntick-idle usermode.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
RCU-tasks requires the occasional voluntary context switch
from CPU-bound in-kernel tasks. In some cases, this requires
instrumenting cond_resched(). However, there is some reluctance
to countenance unconditionally instrumenting cond_resched() (see
http://lwn.net/Articles/603252/), so this commit creates a separate
cond_resched_rcu_qs() that may be used in place of cond_resched() in
locations prone to long-duration in-kernel looping.
This commit currently instruments only RCU-tasks. Future possibilities
include also instrumenting RCU, RCU-bh, and RCU-sched in order to reduce
IPI usage.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, when RCU awakens from a wait_event_interruptible() that
might have awakened prematurely, it does a flush_signals(). This is
done on the off-chance that someone figured out how to deliver a signal
to a kthread, which is supposed to be impossible. Given that this
is supposed to be impossible, this commit changes the flush_signals()
calls into WARN_ON(signal_pending()).
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Commit 96d3fd0d31 (rcu: Break call_rcu() deadlock involving scheduler
and perf) covered the case where __call_rcu_nocb_enqueue() needs to wake
the rcuo kthread due to the queue being initially empty, but did not
do anything for the case where the queue was overflowing. This commit
therefore also defers wakeup for the overflow case.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Return a bool type instead of 0 in rcu_try_advance_all_cbs().
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
fix sparse warning about rcu_batches_completed_preempt() being non-static by
marking it as static
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Change the remaining uses of ACCESS_ONCE() so that each ACCESS_ONCE() either does a load or a store, but not both.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The nocb callbacks generated before the nocb kthreads are spawned are
enqueued in the nocb queue for later processing. Commit fbce7497ee ("rcu:
Parallelize and economize NOCB kthread wakeups") introduced nocb leader kthreads
which checked the nocb_leader_wake flag to see if there were any such pending
callbacks. A case was reported in which newly spawned leader kthreads were not
processing the pending callbacks as this flag was not set, which led to a boot
hang.
The following commit ensures that the newly spawned nocb kthreads process the
pending callbacks by allowing the kthreads to run immediately after spawning
instead of waiting. This is done by inverting the logic of nocb_leader_wake
tests to nocb_leader_sleep which allows us to use the default initialization of
this flag to 0 to let the kthreads run.
Reported-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Link: http://www.spinics.net/lists/kernel/msg1802899.html
[ paulmck: Backported to v3.17-rc2. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Amit Shah <amit.shah@redhat.com>
If there isn't a nohz_full= kernel parameter specified, then
tick_nohz_full_mask can legitimately be NULL. This can cause
problems when RCU's boot code tries to cpumask_or() this value into
rcu_nocb_mask. In addition, if NO_HZ_FULL_ALL=y, there is no point
in doing the cpumask_or() in the first place because this will cause
RCU_NOCB_CPU_ALL=y, which in turn will have all bits already set in
rcu_nocb_mask.
This commit therefore avoids the cpumask_or() if NO_HZ_FULL_ALL=y
and checks for !tick_nohz_full_running otherwise, this latter check
catching cases when there was no nohz_full= kernel parameter specified.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit annotates rcu_report_unblock_qs_rnp() in order to fix the
following sparse warning:
kernel/rcu/tree_plugin.h:990:13: warning: context imbalance in 'rcu_report_unblock_qs_rnp' - unexpected unlock
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
This commit annotates rcu_initiate_boost() fixes the following sparse
warning:
kernel/rcu/tree_plugin.h:1494:13: warning: context imbalance in 'rcu_initiate_boost' - unexpected unlock
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Binding the grace-period kthreads to the timekeeping CPU resulted in
significant performance decreases for some workloads. For more detail,
see:
https://lkml.org/lkml/2014/6/3/395 for benchmark numbers
https://lkml.org/lkml/2014/6/4/218 for CPU statistics
It turns out that it is necessary to bind the grace-period kthreads
to the timekeeping CPU only when all but CPU 0 is a nohz_full CPU
on the one hand or if CONFIG_NO_HZ_FULL_SYSIDLE=y on the other.
In other cases, it suffices to bind the grace-period kthreads to the
set of non-nohz_full CPUs.
This commit therefore creates a tick_nohz_not_full_mask that is the
complement of tick_nohz_full_mask, and then binds the grace-period
kthread to the set of CPUs indicated by this new mask, which covers
the CONFIG_NO_HZ_FULL_SYSIDLE=n case. The CONFIG_NO_HZ_FULL_SYSIDLE=y
case still binds the grace-period kthreads to the timekeeping CPU.
This commit also includes the tick_nohz_full_enabled() check suggested
by Frederic Weisbecker.
Reported-by: Jet Chen <jet.chen@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Created housekeeping_affine() and housekeeping_mask per
fweisbec feedback. ]
RCU priority boosting currently checks for boosting via a pointer in
task_struct. However, this is not needed: As Oleg noted, if the
rt_mutex is placed in the rcu_node instead of on the booster's stack,
the boostee can simply check it see if it owns the lock. This commit
makes this change, shrinking task_struct by one pointer and the kernel
by thirteen lines.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The current approach to RCU priority boosting uses an rt_mutex strictly
for its priority-boosting side effects. The rt_mutex_init_proxy_locked()
function is used by the booster to initialize the lock as held by the
boostee. The booster then uses rt_mutex_lock() to acquire this rt_mutex,
which priority-boosts the boostee. When the boostee reaches the end
of its outermost RCU read-side critical section, it checks a field in
its task structure to see whether it has been boosted, and, if so, uses
rt_mutex_unlock() to release the rt_mutex. The booster can then go on
to boost the next task that is blocking the current RCU grace period.
But reasonable implementations of rt_mutex_unlock() might result in the
boostee referencing the rt_mutex's data after releasing it. But the
booster might have re-initialized the rt_mutex between the time that the
boostee released it and the time that it later referenced it. This is
clearly asking for trouble, so this commit introduces a completion that
forces the booster to wait until the boostee has completely finished with
the rt_mutex, thus avoiding the case where the booster is re-initializing
the rt_mutex before the last boostee's last reference to that rt_mutex.
This of course does introduce some overhead, but the priority-boosting
code paths are miles from any possible fastpath, and the overhead of
executing the completion will normally be quite small compared to the
overhead of priority boosting and deboosting, so this should be OK.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In kernels built with CONFIG_NO_HZ_FULL, tick_do_timer_cpu is constant
once boot completes. Thus, there is no need to wrap it in ACCESS_ONCE()
in code that is built only when CONFIG_NO_HZ_FULL. This commit therefore
removes the redundant ACCESS_ONCE().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Enabling NO_HZ_FULL currently has the side effect of enabling callback
offloading on all CPUs. This results in lots of additional rcuo kthreads,
and can also increase context switching and wakeups, even in cases where
callback offloading is neither needed nor particularly desirable. This
commit therefore enables callback offloading on a given CPU only if
specifically requested at build time or boot time, or if that CPU has
been specifically designated (again, either at build time or boot time)
as a nohz_full CPU.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
An 80-CPU system with a context-switch-heavy workload can require so
many NOCB kthread wakeups that the RCU grace-period kthreads spend several
tens of percent of a CPU just awakening things. This clearly will not
scale well: If you add enough CPUs, the RCU grace-period kthreads would
get behind, increasing grace-period latency.
To avoid this problem, this commit divides the NOCB kthreads into leaders
and followers, where the grace-period kthreads awaken the leaders each of
whom in turn awakens its followers. By default, the number of groups of
kthreads is the square root of the number of CPUs, but this default may
be overridden using the rcutree.rcu_nocb_leader_stride boot parameter.
This reduces the number of wakeups done per grace period by the RCU
grace-period kthread by the square root of the number of CPUs, but of
course by shifting those wakeups to the leaders. In addition, because
the leaders do grace periods on behalf of their respective followers,
the number of wakeups of the followers decreases by up to a factor of two.
Instead of being awakened once when new callbacks arrive and again
at the end of the grace period, the followers are awakened only at
the end of the grace period.
For a numerical example, in a 4096-CPU system, the grace-period kthread
would awaken 64 leaders, each of which would awaken its 63 followers
at the end of the grace period. This compares favorably with the 79
wakeups for the grace-period kthread on an 80-CPU system.
Reported-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Commit ac1bea8578 (Make cond_resched() report RCU quiescent states)
fixed a problem where a CPU looping in the kernel with but one runnable
task would give RCU CPU stall warnings, even if the in-kernel loop
contained cond_resched() calls. Unfortunately, in so doing, it introduced
performance regressions in Anton Blanchard's will-it-scale "open1" test.
The problem appears to be not so much the increased cond_resched() path
length as an increase in the rate at which grace periods complete, which
increased per-update grace-period overhead.
This commit takes a different approach to fixing this bug, mainly by
moving the RCU-visible quiescent state from cond_resched() to
rcu_note_context_switch(), and by further reducing the check to a
simple non-zero test of a single per-CPU variable. However, this
approach requires that the force-quiescent-state processing send
resched IPIs to the offending CPUs. These will be sent only once
the grace period has reached an age specified by the boot/sysfs
parameter rcutree.jiffies_till_sched_qs, or once the grace period
reaches an age halfway to the point at which RCU CPU stall warnings
will be emitted, whichever comes first.
Reported-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Lameter <cl@gentwo.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
[ paulmck: Made rcu_momentary_dyntick_idle() as suggested by the
ktest build robot. Also fixed smp_mb() comment as noted by
Oleg Nesterov. ]
Merge with e552592e (Reduce overhead of cond_resched() checks for RCU)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The variable and struct both having the name "rcu_state" confuses
sparse in some situations, so this commit changes the variable to
"rcu_state_p" in order to avoid this confusion. This also makes
things easier for human readers.
Signed-off-by: Uma Sharma <uma.sharma523@gmail.com>
[ paulmck: Changed the declaration and several additional uses. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
__this_cpu_ptr is being phased out.
One special case is increment_cpu_stall_ticks().
A per cpu variable is incremented so use raw_cpu_inc().
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, small systems move back into RCU_SYSIDLE_NOT from
RCU_SYSIDLE_SHORT and large systems do not. This works because moving
aggressively to RCU_SYSIDLE_NOT affects only performance, not correctness,
and on small systems, the performance impact should be negligible. That
said, this difference does make RCU a bit more complex, and RCU does not
seem to be suffering from any lack of complexity. This commit therefore
adjusts small-system operation to match that of large systems, so that
the state never moves back to RCU_SYSIDLE_NOT from RCU_SYSIDLE_SHORT.
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Currently, RCU binds the grace-period kthreads to the timekeeping
CPU only if CONFIG_NO_HZ_FULL_SYSIDLE=y. This means that these
kthreads must be bound manually when CONFIG_NO_HZ_FULL_SYSIDLE=n and
CONFIG_NO_HZ_FULL=y: Otherwise, these kthreads will induce OS jitter on
random CPUs. Given that we are trying to reduce the amount of manual
tweaking required to make CONFIG_NO_HZ_FULL=y work nicely, this commit
makes this binding happen when CONFIG_NO_HZ_FULL=y, even in cases where
CONFIG_NO_HZ_FULL_SYSIDLE=n.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
