Commit Graph

1279 Commits

Author SHA1 Message Date
David Lechner
27823278ba ARM: davinci: switch to common clock framework
This switches ARCH_DAVINCI to use the common clock framework. The legacy
clock code in arch/arm/mach-davinci/ is no longer used. New drivers in
drivers/clk/davinci/ are used instead.

A few macros had to be moved to prevent compilation errors.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-06-26 15:54:43 +05:30
David Lechner
4d7ee968ed ARM: davinci: remove CONFIG_DAVINCI_RESET_CLOCKS
The common clock framework will take care of disabling unused clocks when
we switch from the legacy davinci clocks and having this enabled will
cause compile errors after we switch, so remove it now.

Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-06-26 15:52:07 +05:30
David Lechner
aa1da33c09 ARM: davinci: da8xx: add new sata_refclk init using common clock framework
This adds the new SATA REFCLK clock init in mach-davinci/devices-da8xx.c
using the new common clock framework drivers.

The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.

Also, the #includes are sorted since we are adding some here.

Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-06-26 15:50:38 +05:30
David Lechner
5411bad4ea ARM: davinci: da8xx: add new USB PHY clock init using common clock framework
This adds the new USB PHY clock init in mach-davinci/usb-da8xx.c using
the new common clock framework drivers.

The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-06-26 15:49:12 +05:30
David Lechner
81df7d8536 ARM: davinci: dm646x: add new clock init using common clock framework
This adds the new board-specific clock init in mach-davinci/dm646x.c
using the new common clock framework drivers.

The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.

Also clean up the #includes since we are adding some here.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-06-26 15:48:35 +05:30
David Lechner
a5b1a87199 ARM: davinci: dm644x: add new clock init using common clock framework
This adds the new board-specific clock init in mach-davinci/dm644x.c
using the new common clock framework drivers.

The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.

Also clean up the #includes since we are adding some here.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-06-26 15:47:58 +05:30
David Lechner
21c2f4773d ARM: davinci: dm365: add new clock init using common clock framework
This adds the new board-specific clock init in mach-davinci/dm365.c
using the new common clock framework drivers.

The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.

Also clean up the #includes since we are adding some here.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-06-26 15:46:42 +05:30
David Lechner
5b19f66d63 ARM: davinci: dm355: add new clock init using common clock framework
This adds the new board-specific clock init in mach-davinci/dm355.c
using the new common clock framework drivers.

The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.

Also clean up the #includes since we are adding some here.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-06-26 15:45:55 +05:30
David Lechner
482db8893e ARM: davinci: da850: add new clock init using common clock framework
This adds the new board-specific clock init in mach-davinci/da850.c
using the new common clock framework drivers.

The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.

Also clean up the #includes since we are adding some here.

Some CFGCHIP macros were removed because we are now including
linux/mfd/da8xx-cfgchip.h which defines the same values.

Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-06-26 15:44:40 +05:30
David Lechner
3952af1ca2 ARM: davinci: da830: add new clock init using common clock framework
This adds the new board-specific clock init in mach-davinci/da830.c
using the new common clock framework drivers.

The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.

Also clean up the #includes since we are adding some here.

Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-06-26 15:39:59 +05:30
David Lechner
a7da5277cd ARM: davinci: pass clock as parameter to davinci_timer_init()
This changes davinci_timer_init() so that we pass the clock as a
parameter instead of using clk_get(). This is done in preparation
for converting to the common clock framework.

It removes the requirement that we have to have a clock with con_id
of "timer0", which will be good for DT bindings since clock-names =
"timer0" doesn't really make sense.

Also, drop use of extern in header file since we are touching the
definition.

Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-06-26 15:38:58 +05:30
Linus Torvalds
7c00e8ae04 ARM: SoC platform updates
Here are the main updates for SoC support (besides DT additions) for ARM
 32- and 64-bit platforms. The branch also contains defconfig updates to
 turn on drivers and options as needed on the various platforms.
 
 The largest parts of the delta are from cleanups moving platform data
 and board file setup of TI platforms to ti-sysc bus drivers. There are
 also some sweeping changes of eeprom and nand setup on Davinci, i.MX
 and other platforms.
 
 Samsung is removing support for Exynos5440, which was an oddball SoC
 that hasn't been seen much use in designs.
 
 Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).
 
 Linus Walleij is also removing support for ux500 (Sony Ericsson)
 U8540/9540 SoCs that never made it to significant mass production and
 products.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAlsfCGIPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3Ks8P/3j87Za+6OTCzo+lW2byUy1CI4muGwxNSIxX
 65A1Wt2qvRDxjCX4MI5Cx8P1YdYJv+5ZF2p4vdlgQXoz3/XDbG+lxJ+/lyWl/+MK
 9kGsQWwEVicbGkaJCYR4ZKvfAwZ9jf7+cndY0Vgii44xQLsQZHEIfIO+mdlK43GZ
 xqaSckLQQzsDqjMUIckiyVy97RsDk1eLK+H2I+l7qs9v0z5UnhoD2CTxX5LzT8eH
 NlFmfUPN7Znshmt0aMznZyBRr2oM5Dsg49SfG0WhbOzyiZjSpw8MQ0N+RzyROhhB
 h5PjyuZN9fx2dO8Jjkqt3B8KmGFNDarGOmrasIJeCJDFRa9NStqFn0y4qJXS2wU7
 4La3GoBYRV8x0gq339pQ+70qKuD06e62GL7kV656yi+93CitWxy6IjrIACjSX6zH
 PD1hQpewfXAcHAHdBqNevRcz/sjG+36GJSCgI4umSP48NMlCuZafFAT4U/PVlt4E
 6VRQDeoi5ZFYIuPL1+bZvHax4fFxJGnaf02uQ/OPYP1o48AueSSvdo6bUPFbhwOD
 u0/uo3r+HxtQsw9I3tP3kj3/775BJclkO6zbG/dGZ8obuzuDwhuFtr3rzCrP/IzN
 n3rcBuFNZE6SQeKU+Tvmnh8ZLhJc5L8EYvqmihZj+BSfprBc8POFR2la4MRnHSn+
 tPEC/n9E
 =S5wc
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "Here are the main updates for SoC support (besides DT additions) for
  ARM 32- and 64-bit platforms. The branch also contains defconfig
  updates to turn on drivers and options as needed on the various
  platforms.

  The largest parts of the delta are from cleanups moving platform data
  and board file setup of TI platforms to ti-sysc bus drivers. There are
  also some sweeping changes of eeprom and nand setup on Davinci, i.MX
  and other platforms.

  Samsung is removing support for Exynos5440, which was an oddball SoC
  that hasn't been seen much use in designs.

  Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D).

  Linus Walleij is also removing support for ux500 (Sony Ericsson)
  U8540/9540 SoCs that never made it to significant mass production and
  products"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  MAINTAINERS: add NXP linux team maillist as i.MX reviewer
  ARM: stm32: Don't select DMA unconditionally on STM32MP157C
  arm64: defconfig: Enable PCIe on msm8996 and db820c
  ARM: pxa3xx: enable external wakeup pins
  ARM: pxa: stargate2: use device properties for at24 eeprom
  arm64: defconfig: Enable HISILICON_LPC
  arm64: defconfig: enable drivers for Poplar support
  arm64: defconfig: Enable UFS on msm8996
  ARM: berlin: switch to SPDX license identifier
  arm: berlin: remove non-necessary flush_cache_all()
  ARM: berlin: extend BG2CD Kconfig entry
  OMAP: CLK: CLKSRC: Add suspend resume hooks
  ARM: AM43XX: Add functions to save/restore am43xx control registers
  ASoC: ams_delta: use GPIO lookup table
  ARM: OMAP1: ams-delta: add GPIO lookup tables
  bus: ti-sysc: Fix optional clocks array access
  ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared
  ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore
  ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO
  ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore
  ...
2018-06-11 17:49:09 -07:00
Sekhar Nori
bb7298a7e8 ARM: davinci: board-dm646x-evm: set VPIF capture card name
VPIF capture driver expects card name to be set since it
uses it without checking for NULL. The commit which
introduced VPIF display and capture support added card
name only for display, not for capture.

Set it in platform data to probe driver successfully.

While at it, also fix the display card name to something more
appropriate.

Fixes: 85609c1ccd ("DaVinci: DM646x - platform changes for vpif capture and display drivers")
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-15 14:31:12 +05:30
Sekhar Nori
7d46899d57 ARM: davinci: board-dm646x-evm: pass correct I2C adapter id for VPIF
commit a16cb91ad9 ("[media] media: vpif: use a configurable
i2c_adapter_id for vpif display") removed hardcoded I2C adaptor
setting in VPIF driver, but missed updating platform data passed
from DM646x board.

Fix it.

Fixes: a16cb91ad9 ("[media] media: vpif: use a configurable i2c_adapter_id for vpif display")
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-15 14:30:34 +05:30
Sekhar Nori
73d4337ed9 ARM: davinci: dm646x: fix timer interrupt generation
commit b38434145b ("ARM: davinci: irqs: Correct McASP1 TX interrupt
definition for DM646x") inadvertently removed priority setting for
timer0_12 (bottom half of timer0). This timer is used as clockevent.

When INTPRIn register setting for an interrupt is left at 0, it is
mapped to FIQ by the AINTC causing the timer interrupt to not get
generated.

Fix it by including an entry for timer0_12 in interrupt priority map
array. While at it, move the clockevent comment to the right place.

Fixes: b38434145b ("ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x")
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-15 14:29:34 +05:30
Sekhar Nori
ccfadbb759 Merge branch 'v4.18/nand-cs-simplification' into v4.18/soc 2018-05-02 15:04:15 +05:30
Sekhar Nori
8e730c7f90 ARM: davinci: dm644x: remove unnecessary postcore_initcall()
dm644x_init_devices() is unnecessarily implemented as a
postcore_initcall().

This does not cause any issues now, but creates issues when
converting to common clock framework where clocks themselves
become platform devices and are initialized later. Because of
this, device clock acquisition and runtime PM on that device
fails.

Move the call to .init_machine() callback along with rest of
platform device's registration.

While at it, convert it to return void since return value is
ignored by caller anyway.

Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-02 15:02:25 +05:30
Bartosz Golaszewski
7c4db57cdb ARM: davinci: aemif: stop using pdev->id as nand chipselect
All platforms now use the core_chipsel field in platform_data. Stop
using pdev->id in the aemif code.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-02 14:59:19 +05:30
Bartosz Golaszewski
36bd4c4eb5 ARM: davinci: neuros-osd2: specify the chipselect in davinci_nand_pdata
We now have the core_chipsel field in davinci_nand_pdata. Use it
instead of the platform_device id number.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-02 14:58:58 +05:30
Bartosz Golaszewski
9a34ace65e ARM: davinci: dm646x-evm: specify the chipselect in davinci_nand_pdata
We now have the core_chipsel field in davinci_nand_pdata. Use it
instead of the platform_device id number.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-02 14:58:57 +05:30
Bartosz Golaszewski
75760c6879 ARM: davinci: mityomapl138: specify the chipselect in davinci_nand_pdata
We now have the core_chipsel field in davinci_nand_pdata. Use it
instead of the platform_device id number.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-02 14:58:56 +05:30
Bartosz Golaszewski
040c6a04bd ARM: davinci: dm644x-evm: specify the chipselect in davinci_nand_pdata
We now have the core_chipsel field in davinci_nand_pdata. Use it
instead of the platform_device id number.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-02 14:58:56 +05:30
Bartosz Golaszewski
79b9bb3110 ARM: davinci: dm365-evm: specify the chipselect in davinci_nand_pdata
We now have the core_chipsel field in davinci_nand_pdata. Use it
instead of the platform_device id number.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-02 14:58:55 +05:30
Bartosz Golaszewski
5dfebc86da ARM: davinci: dm355-leopard: specify the chipselect in davinci_nand_pdata
We now have the core_chipsel field in davinci_nand_pdata. Use it
instead of the platform_device id number.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-02 14:58:54 +05:30
Bartosz Golaszewski
39bdf863e4 ARM: davinci: dm355-evm: specify the chipselect in davinci_nand_pdata
We now have the core_chipsel field in davinci_nand_pdata. Use it
instead of the platform_device id number.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-02 14:58:53 +05:30
Bartosz Golaszewski
4fe714c0ae ARM: davinci: da850-evm: specify the chipselect in davinci_nand_pdata
We now have the core_chipsel field in davinci_nand_pdata. Use it
instead of the platform_device id number.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-02 14:58:53 +05:30
Bartosz Golaszewski
8fb6ca6b9c ARM: davinci: da830-evm: specify the chipselect in davinci_nand_pdata
We now have the core_chipsel field in davinci_nand_pdata. Use it
instead of the platform_device id number.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-02 14:58:52 +05:30
Sekhar Nori
9411ac07cd ARM: davinci: fix GPIO lookup for I2C
The GPIO chip is called davinci_gpio.0 in legacy mode. Fix it, so that
I2C can correctly lookup the recovery gpios.

Note that it is the gpio-davinci driver that sets the gpiochip label to
davinci_gpio.0.

Also, the I2C device uses an id of 1 on DM644x and DM355.

While at it, convert to using GPIO_TO_PIN() for referring to GPIO pin
numbers, like it is done in rest of the board support files.

Fixes: e535376537 ("i2c/ARM: davinci: Deep refactoring of I2C recovery")
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-02 14:55:06 +05:30
Sekhar Nori
5c054de228 ARM: davinci: board-dm355-evm: fix broken networking
Since commit 09f3756bb9 ("dm9000: Return an ERR_PTR() in all
error conditions of dm9000_parse_dt()"), passing either non-NULL
platform data or device-tree for dm9000 driver to probe is
mandatory.

DM335 board was using none, so networking failed to initialize.
Fix it by passing non-NULL (but empty) platform data.

Fixes: 09f3756bb9 ("dm9000: Return an ERR_PTR() in all error conditions of dm9000_parse_dt()")
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-01 17:19:51 +05:30
Sekhar Nori
d45622c0ea ARM: davinci: board-omapl138-hawk: fix GPIO numbers for MMC/SD lookup
commit c4dc56be7e ("ARM: davinci: fix the GPIO lookup for omapl138-hawk")
fixed the GPIO chip name for look-up of MMC/SD CD and WP pins, but forgot
to change the GPIO numbers passed.

The GPIO numbers are not offsets from within a 32 GPIO bank. Fix the
GPIO numbers as well as remove the misleading comment.

Fixes: c4dc56be7e ("ARM: davinci: fix the GPIO lookup for omapl138-hawk")
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-01 17:16:02 +05:30
Sekhar Nori
67c6b6ff22 ARM: davinci: board-da850-evm: fix GPIO lookup for MMC/SD
The GPIO chip is called davinci_gpio.0 in legacy mode. Fix it, so that
mmc can correctly lookup the wp and cp gpios. Also fix the GPIO numbers
as they are not offsets within a bank.

Note that it is the gpio-davinci driver that sets the gpiochip label to
davinci_gpio.0.

Fixes: bdf0e8364f ("ARM: davinci: da850-evm: use gpio descriptor for mmc pins")
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-01 17:14:39 +05:30
Sekhar Nori
51e9f12163 ARM: davinci: board-da830-evm: fix GPIO lookup for MMC/SD
The GPIO chip is called davinci_gpio.0 in legacy mode. Fix it, so that
mmc can correctly lookup the wp and cp gpios. Also fix the GPIO numbers
as they are not offsets within a bank.

Note that it is the gpio-davinci driver that sets the gpiochip label to
davinci_gpio.0.

Fixes: b5e1438cf9 ("ARM: davinci: da830-evm: use gpio descriptor for mmc pins")
Reported-by: David Lechner <david@lechnology.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-05-01 17:13:38 +05:30
Linus Torvalds
167569343f ARM: SoC platform updates for 4.17
This release brings up a new platform based on the old ARM9 core: the
 Nuvoton NPCM is used as a baseboard management controller, competing
 with the better known ASpeed AST2xx series.
 
 Another important change is the addition of ARMv7-A based chips
 in mach-stm32. The older parts in this platform are ARMv7-M based
 microcontrollers, now they are expanding to general-purpose workloads.
 
 The other changes are the usual defconfig updates to enable additional
 drivers, lesser bugfixes. The largest updates as often are the ongoing
 OMAP cleanups, but we also have a number of changes for the older
 PXA and davinci platforms this time.
 
 For the Renesas shmobile/r-car platform, some new infrastructure
 is needed to make the watchdog work correctly.
 
 Supporting Multiprocessing on Allwinner A80 required a significant
 amount of new code, but is not doing anything unexpected.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaxibSAAoJEGCrR//JCVInPwcP/2ZdLMXXXaJBM+rCRPhT+vR1
 FsKqcTCC5RHbVcKW+N54nmlsqofy2GadlmyfOdrFXtbf+Sm2dRNsDrHDOhvoPp37
 fwBd0wGw0PLjNE8SEPp/ldtFe11Dbg0WGBzJ4PAPJgt1W4hvW8//VzVW1XsiRrVc
 9SlZ66DwR95UQ5pwy+dfE8f9A/WW4XaMq0UHQ3/deQ/Te/64b/C6CJtT3W73WAlR
 83UHgkwq3WvI+hhvg4QX9H0Q6dcK2JLUWsAB0xnZP8Q8t30NdDpl61uZL0A4Mh9Y
 38lPhUjPUyUpsGrOttmMEQNzbAk4m/nzQxByYYmhkx3x+mlhjdA9KNavxDYVxXN2
 1tzz62wst8pLePqVt2UsFqsaruJGMuTIooOdc5iCjG1c2N2kQGdBsuOvLjYu9kV6
 XPTfvvAYkMo9rC0MbdPuobG+h/WrYHuc9SD2Mnt+kNaw1yJL08fWENjSuwP7kheb
 2A5jdAFNrGqgcrWMsQOw8eYYC7z7WojkLq0kHrBbwIlVD7KIZurv2fm/iVo4+xPH
 Gig5HuehMUtVYAf+Q1KWFlqS01fXMErt2pDGI5f1mNumXCB5kdWoSKbU8lOg03f8
 ZqBHlfly+QDMOx0qfkxFX+phHPWHTOC+45yHK2Xq+n9urXmQbzYZxTzq5zCu6jcm
 4yH0jaykoHODGNLIt50f
 =HD9V
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "This release brings up a new platform based on the old ARM9 core: the
  Nuvoton NPCM is used as a baseboard management controller, competing
  with the better known ASpeed AST2xx series.

  Another important change is the addition of ARMv7-A based chips in
  mach-stm32. The older parts in this platform are ARMv7-M based
  microcontrollers, now they are expanding to general-purpose workloads.

  The other changes are the usual defconfig updates to enable additional
  drivers, lesser bugfixes. The largest updates as often are the ongoing
  OMAP cleanups, but we also have a number of changes for the older PXA
  and davinci platforms this time.

  For the Renesas shmobile/r-car platform, some new infrastructure is
  needed to make the watchdog work correctly.

  Supporting Multiprocessing on Allwinner A80 required a significant
  amount of new code, but is not doing anything unexpected"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits)
  arm: npcm: modify configuration for the NPCM7xx BMC.
  MAINTAINERS: update entry for ARM/berlin
  ARM: omap2: fix am43xx build without L2X0
  ARM: davinci: da8xx: simplify CFGCHIP regmap_config
  ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data
  ARM: multi_v7_defconfig: add NXP FlexCAN IP support
  ARM: multi_v7_defconfig: enable thermal driver for i.MX devices
  ARM: multi_v7_defconfig: add RN5T618 PMIC family support
  ARM: multi_v7_defconfig: add NXP graphics drivers
  ARM: multi_v7_defconfig: add GPMI NAND controller support
  ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs
  ARM: multi_v7_defconfig: configure I2C driver built-in
  arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE
  ARM: imx: fix imx6sll-only build
  ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well
  ARM: mxs_defconfig: Re-sync defconfig
  ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver
  ARM: imx_v4_v5_defconfig: Re-sync defconfig
  arm64: defconfig: enable stmmac ethernet to defconfig
  ARM: EXYNOS: Simplify code in coupled CPU idle hot path
  ...
2018-04-05 21:21:08 -07:00
Arnd Bergmann
04a2c2efbf A fix and a clean-up patch for content previously queued for v4.17.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJavJ0dAAoJEGFBu2jqvgRNe+AQAI+hMIdp+0l3KRxz6sukAU8D
 dlJNPObivN2awJAiin+cMRMWmOJetSJOaNtO/a+KC9I9hzRGoQtJ8EXkBZpf0jP/
 KjU/Dx/EZt2jx1YSTLXKnO13GaNFKpR4RemFVVa5BlpX2wpXKFfRQE2eqZkdAPau
 762ZOZjxRnAVpVAdbQ6K9bI0YJsherXVRjISMf3w6HlLgkM73ow9YsZjG5WGbTYU
 fBRAwLQ3EPePVZXBSxvMwcBW/Wooih3YPzbX78/s0u2nVBCmgouj6C7KwSHoUBGh
 d38AlsquU/jyVIYqwIzYU9TcGCbKFt+HIJ/Wgkl9qSbrXmsubWD7ujOMMaW5B2uY
 wOGqPsagE+ij37GqobvvXtdegSirv01GwHOMUCI8/xvwklWkSRyta9OrCTkj6KkU
 3dv41u6KYUoYv7y70IO/r4kAev4onzHQjdUm3d3ELlLXDZYimv41JvBP7oqWGG/m
 jk0S5SUVt+0idY74DIUZyHTlEqMfNez3gR/N1LMDmZIbnFYL3PXQiWuwWnOrJTIA
 +ZVqyS78x5F0IjQpk0TbL7/R4lYz3R1j+FMgpaiZL8tqChaa/xbD00ybjNp8iuYn
 v3MVFEPRIYwhNzfeLQ74ZNFMlX9FoP+AC9AGbz44dKWa91pxSyQbldt73phoRDZQ
 Zvp8ODuDT7dEjBBo9i6+
 =9vcj
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v4.17/soc-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc

Pull "DaVinci SoC update fixes for v4.17" from Sekhar Nori:

A fix and a clean-up patch for content previously queued for v4.17.

* tag 'davinci-for-v4.17/soc-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da8xx: simplify CFGCHIP regmap_config
  ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data
2018-04-05 11:09:02 +02:00
David Lechner
f6adc9fd1f ARM: davinci: da8xx: simplify CFGCHIP regmap_config
Since commit 8253bb3f82 ("regmap: potentially duplicate the name
string stored in regmap"), the name field of struct regmap_config
is copied in __regmap_init(), so we no longer need to worry about
keeping our own copy of the name.

Just use a string literal in the initialization of da8xx_cfgchip_config
instead of creating a separate variable for the name.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-03-29 12:19:12 +05:30
David Lechner
3424a516d9 ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data
This fixes a possible kernel oops due to using stack allocated platform
data for the USB PHY driver on DA8XX devices. If the platform device
probe is deferred, then we get a corrupt pointer for the platform data.

We now use a global static struct for the platform data so that the
platform data pointer does not get written over.

Fixes: bdec5a6b57 ("ARM: da8xx: use platform data for CFGCHIP syscon regmap")
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-03-29 12:18:32 +05:30
Arnd Bergmann
3a5d470d07 A patch fixing GPIO look-up for MMC/SD card detect and write-protect
pins on OMAP-L138 Hawkboard.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaol/+AAoJEGFBu2jqvgRNIqIP/jas56iYITXx206xkKtXfSvH
 NtQ5yZF5RpXGr/B5DExcNo4HOxFmzjWmE9NWo3c5SmQV+h81Lyg6jePZwoGp2XYe
 Iq6LFZIPS1dwR70lytdJRbszxpjcz9pTKF25qhtjPWilmqbuMPO3kQKnjMP1cGsI
 kp7uyIkknwu4dxJb29ANzN71R3F+nlmL94WGpT1oHVh3bqk0J42TnZx82A3oVyXG
 2A1+1Gsh1oBA478jFwQlCZq5MfnCCbAByl3nNRBQ4EY3Du90gUH4KNgjuY7DZP9c
 srZc01AK7+2sMgimfZWuS+cJZufdMQ9UJqXzMyG5IGaPdFmNuOZzpJxKXRA+i2qA
 FKw1T4tDXOLpZ/54gfa9BgVcR++h7M5F9s8K3uYMvbihc0GymzCwB6xtGvG768eX
 RCpKvCFli9A6i3gh5QTvOkZNLhgZ68ZKcj6oIwOX9VrJAqi48WlWWVl0g8dGEuJq
 /GNq1vXTpiKPYwsnnxydfYtEfjhuhoXQSS5gLVkck5b4JKEKnmDc98QjNRtwB4gK
 bsWilHemL2tyY1svxK0GfHddFs/cKPKQbklYdnEAdpRCyqIF6fnhoCLTKFiAIRKQ
 wG1bBiW6gynzBwivJz38Xa1ITQtGB35VGspvW51oYuTxZWj6JRCv0VdRIJP2zgcQ
 wrKsbJVJAD5AMMeg3Ot/
 =/zSM
 -----END PGP SIGNATURE-----

Merge tag 'davinci-fixes-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes

Pull "DaVinci fixes for v4.16" from Sekhar Nori:

A patch fixing GPIO look-up for MMC/SD card detect and write-protect
pins on OMAP-L138 Hawkboard.

* tag 'davinci-fixes-for-v4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: fix the GPIO lookup for omapl138-hawk
2018-03-12 15:30:43 +01:00
Bartosz Golaszewski
c4dc56be7e ARM: davinci: fix the GPIO lookup for omapl138-hawk
The GPIO chip is called davinci_gpio.0 in legacy mode. Fix it, so that
mmc can correctly lookup the wp and cp gpios.

Note that it is the gpio-davinci driver that sets the gpiochip label to
davinci_gpio.0.

Fixes: c69f43fb4f ("ARM: davinci: hawk: use gpio descriptor for mmc pins")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[nsekhar@ti.com: add a note on where the chip label is set]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-03-09 15:25:40 +05:30
Arnd Bergmann
62a295bd82 Miscellaneous DaVinci SoC support improvements for v4.17
* rationalization of con_id names for phy clocks to make DT conversion easy
 
 * A patch to move away from syscon as platform device. This is needed for
   common clock framework conversion as well as helps get rid of
   syscon_regmap_lookup_by_pdevname() by removing the last known user.
 
 * convert mach-davinci to use reset support available in watchdog driver
 
 * a non-critical warning fix. It has been around since beginning so not sending
   as a standalone fix for -rc cycle.
 
 * moving mach-davinci clock init to .init_time() for legacy boot. This is
   again in preparation for CCF conversion.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJalPjTAAoJEGFBu2jqvgRNHwcP+gP6U9YQd7txyFy0bv73nTfu
 wn9ebJSWwzGruqMHO3ZhpC6MI0cKxIZ3mJbfADs/y/5Ha73sT06D3ajZT/+/Ij68
 Pm9bgvEail+P2rhevBqiKShdTWMFcbSy35RF+O0u9o446lVRFDNtEuoyb2OToA1F
 Q+dvuDNzVASxFsOI+hgPkyfol4LkazPWvI3KrOjHhZBi7Nf2d+/03/vI4JhsnCjc
 BhPDfbrAodubpxhGqTOT9MHuTHvGOxrKp73OajdPgn+Z1na0U4XbMapshnaQQH0K
 fNU4SO92qVv7ElgQVPNknVS9x3/vpI1024HIpxcHEPYPV+akl947AXlmpprX98Jx
 8Cb2xVnY8FCYxuQsMCKrmt/gM0dDYLg9S+mo94hkZYNoWqoZvtc64uZE+IxiyLEw
 z3IAtoC2+D+6VL66gnoMUsVGxkkcj16E3O6p0NKLLJhMqpZdsm9yvRupohEU8Y+6
 z+XipvnR+P/fEt6m7paM8uKcm/fGlRBLr77GIJR86o4gPKSSHT5vpxqvab51Adl3
 lXreP0ZlwXmOlU6tRffHPqHj6agBTalOHr7vSd7QRma/AotNcLkwJ+8rzNNgUjfa
 jJS72/AJONHsFDyjtbUWQFNPcu7sWNbzE7FoXDQJyd2vdivhiL0TyrEONGpynA2Z
 drZUuRS1Y6BCHqWRrCq7
 =2MBq
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v4.17/soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc

Pull "Miscellaneous DaVinci SoC support improvements for v4.17" from Sekhar Nori:

* rationalization of con_id names for phy clocks to make DT conversion easy

* A patch to move away from syscon as platform device. This is needed for
  common clock framework conversion as well as helps get rid of
  syscon_regmap_lookup_by_pdevname() by removing the last known user.

* convert mach-davinci to use reset support available in watchdog driver

* a non-critical warning fix. It has been around since beginning so not sending
  as a standalone fix for -rc cycle.

* moving mach-davinci clock init to .init_time() for legacy boot. This is
  again in preparation for CCF conversion.

* tag 'davinci-for-v4.17/soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: move davinci_clk_init() to init_time
  ARM: davinci: board-da830-evm: fix unused const variable warning
  ARM: davinci: remove watchdog reset
  ARM: da8xx: use platform data for CFGCHIP syscon regmap
  phy: da8xx-usb: rename clock con_ids
2018-03-07 16:01:34 +01:00
Arnd Bergmann
eec51afc9d ARM: davinci: mark spi_board_info arrays as const
Building with LTO revealed that three spi_board_info arrays are marked
__initconst, but not const:

arch/arm/mach-davinci/board-dm365-evm.c: In function 'dm365_evm_init':
arch/arm/mach-davinci/board-dm365-evm.c:729:30: error: 'dm365_evm_spi_info' causes a section type conflict with 'dm646x_edma_device'
 static struct spi_board_info dm365_evm_spi_info[] __initconst = {
                              ^
arch/arm/mach-davinci/dm646x.c:603:42: note: 'dm646x_edma_device' was declared here
 static const struct platform_device_info dm646x_edma_device __initconst = {

This marks them const as well, as was originally intended.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-22 17:43:16 +01:00
David Lechner
96c081735d ARM: davinci: move davinci_clk_init() to init_time
This moves the call of davinci_clk_init() from map_io to init_time for all
boards.

This is the proper place to init clocks. This is also done in preparation
for moving to the common clock framework.

dm646x is a special case because we need to handle different ref_clk rates
depending on which board is being used. The clock init in this case is
modified to set the rate before registering the clocks instead of using
davinci_set_refclk_rate() to recalculate the entire clock tree after all
of the clocks are registered.

Also, the cpu_clks field is removed from struct davinci_soc_info since it
is no longer needed.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-02-19 16:25:15 +05:30
Sekhar Nori
4b785cc55e ARM: davinci: board-da830-evm: fix unused const variable warning
da830_evm_emif25_pins[] is used only when CONFIG_DA830_UI_NAND
is enabled. It gives the following warning when the config is
switched off. Fix it.

arch/arm/mach-davinci/board-da830-evm.c:245:20: warning: ‘da830_evm_emif25_pins’ defined but not used [-Wunused-const-variable=]
 static const short da830_evm_emif25_pins[] = {
                    ^~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-02-19 16:25:15 +05:30
David Lechner
94f2e94514 ARM: davinci: remove watchdog reset
This removes the watchdog reset code. The reset has been moved to
drivers/watchdog/davinci_wdt.c. The watchdog driver registers the reset
with the kernel so defining a reset for each machine is no longer needed.

Signed-off-by: David Lechner <david@lechnology.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-02-19 16:25:15 +05:30
David Lechner
bdec5a6b57 ARM: da8xx: use platform data for CFGCHIP syscon regmap
This converts from using a platform device for the CFGCHIP syscon
regmap to using platform data to pass the regmap to consumers.

A lazy getter function is used so that the regmap will only be
created if it is actually used. This function will also be used
in the clock init when we convert to the common clock framework.

The USB PHY driver is currently the only consumer. This driver is
updated to use platform data to get the CFGCHIP regmap instead of
syscon_regmap_lookup_by_pdevname().

Signed-off-by: David Lechner <david@lechnology.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-02-19 16:19:25 +05:30
David Lechner
e98bbbf3bd phy: da8xx-usb: rename clock con_ids
This renames the clock con_ids in the DA8XX USB PHY driver as well as
the matching names in the mach clock registration code.

This is in preparation for using device tree clocks where these names
will become part of the device tree bindings. The new names more closely
match the names used in the USB clock diagram in the SoC TRM.

Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-02-12 13:18:15 +05:30
Linus Torvalds
4141cf676b Merge branch 'i2c/for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
 "I2C has the following changes for you:

   - new flag to mark DMA safe buffers in i2c_msg. Also, some
     infrastructure around it. And docs.

   - huge refactoring of the at24 driver led by the new maintainer
     Bartosz

   - update I2C bus recovery to send STOP after recovery

   - conversion from gpio to gpiod for I2C bus recovery

   - adding a fault-injector to the i2c-gpio driver

   - lots of small driver improvements, and bigger ones to
     i2c-sh_mobile"

* 'i2c/for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (99 commits)
  i2c: mv64xxx: Add myself as maintainer for this driver
  i2c: mv64xxx: Fix clock resource by adding an optional bus clock
  i2c: mv64xxx: Remove useless test before clk_disable_unprepare
  i2c: mxs: use true and false for boolean values
  i2c: meson: update doc description to fix build warnings
  i2c: meson: add configurable divider factors
  dt-bindings: i2c: update documentation for the Meson-AXG
  i2c: imx-lpi2c: add runtime pm support
  i2c: rcar: fix some trivial typos in comments
  i2c: davinci: fix the cpufreq transition
  i2c: rk3x: add proper kerneldoc header
  i2c: rk3x: account for const type of of_device_id.data
  i2c: acorn: remove outdated path from file header
  i2c: acorn: add MODULE_LICENSE tag
  i2c: rcar: implement bus recovery
  i2c: send STOP after successful bus recovery
  i2c: ensure SDA is released in recovery if SDA is controllable
  i2c: add 'set_sda' to bus_recovery_info
  i2c: add identifier in declarations for i2c_bus_recovery
  i2c: make kerneldoc about bus recovery more precise
  ...
2018-02-04 10:57:43 -08:00
Linus Torvalds
adbc128fa8 ARM: SoC platform updates for 4.16
These are mostly minor bugfixes, cleanup and many defconfig updates to
 support added drivers. In particular OMAP and PXA keep cleaning up the
 legacy code base, as usual.
 
 Nvidia adds some more SoC support code for Tegra 186.
 
 For the first time on years, we are actually adding a non-DT platform for,
 the EP93xx based Liebherr controller BK3.1. It's a minor variation of
 the EP93xx reference design and in active use, while EP93xx apparently
 doesn't have enough new development to have any device tree support.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJac0azAAoJEGCrR//JCVInuaAQAJBfJeqhFC01JeO+Oy/Sz3qh
 WuZpT0ExfU1EFLnyBhEYJujDmlzNPcVacI53gSazpiksHboLpOodW+pX19NwOyzC
 RSbyLa+W5MH1uXtIzV8dqwXboOWJ/Fh348VTSG4dw2JJ6i4k3U/9xboOVtnynCic
 ww66FEEpFvJfNgch+7zcpHDwACqJ8nsrortNzEM8eV2jA/DOgv48EemTJqf1Lv1E
 Z0nqIBEPvInPgCB3MX3KTD6CgbQ1qZOcWcEgR1tDRqmCuCgvp4xawiOBKos6QHaG
 Iqgi3jI5rPJ391mhIQqK5duU5IKMY0FO6qxir7U+YNZm8vMmijPMwgEmlkG28mTT
 6B7+ZNHXnSnFklpMetvCBDB8a+Lximft/oqecumowKJo0R9vZontnP4Jdbt9HLic
 T99nzw2Xwhxo/J7kQXcGDoLyRAPgS1iiHyWXKbXADRlaftACeXL9iVTg+F9EAveq
 WTDNmN6hbha4fN5PXUkcTAco96JtevT/H2ZDmYFBCSaqHy3QrNPJtDcVSIJd4CGT
 uQJwXINHvR/nJrEl2ZLLsfMSJMBXWp79w7xb+QfkIa6UXL3hUwGC9Wd2jQZsdHf3
 AQ/Q1oJ6epCvd2+4xo0EwiUMjr2MGqfLmtGBQkMzdSbFe50RhHe3w2Amy3VU03X+
 vFB4zAmReWDZXgQ7+Dhg
 =frm4
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "These are mostly minor bugfixes, cleanup and many defconfig updates to
  support added drivers. In particular OMAP and PXA keep cleaning up the
  legacy code base, as usual.

  Nvidia adds some more SoC support code for Tegra 186.

  For the first time on years, we are actually adding a non-DT platform
  for the EP93xx based Liebherr controller BK3.1. It's a minor variation
  of the EP93xx reference design and in active use, while EP93xx
  apparently doesn't have enough new development to have any device tree
  support"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
  ARM: omap: hwmod: fix section mismatch warnings
  ARM: pxa/tosa-bt: add MODULE_LICENSE tag
  arm64: defconfig: enable CONFIG_ACPI_APEI_EINJ
  arm64: defconfig: enable EDAC GHES option
  arm64: defconfig: enable CONFIG_ACPI_APEI_MEMORY_FAILURE
  ARM: imx_v6_v7_defconfig: enable CONFIG_CPU_FREQ_STAT
  Wind down ARM/TANGO port
  ARM: davinci: constify gpio_led
  ARM: davinci: drop unneeded newline
  soc: Add SoC driver for Gemini
  ARM: SAMSUNG: Add SPDX license identifiers
  ARM: S5PV210: Add SPDX license identifiers
  ARM: S3C64XX: Add SPDX license identifiers
  ARM: S3C24XX: Add SPDX license identifiers
  ARM: EXYNOS: Add SPDX license identifiers
  ARM: imx: remove unused imx3 pm definitions
  ARM: imx: don't abort MMDC probe if power saving status doesn't match
  ARM: imx_v6_v7_defconfig: enable RTC_DRV_MXC_V2
  ARM: imx_v6_v7_defconfig: Add missing config for DART-MX6 SoM
  ARM: davinci: Use PTR_ERR_OR_ZERO()
  ...
2018-02-01 16:17:40 -08:00
Greg Kroah-Hartman
c182ce9bc8 Merge 4.15-rc8 into usb-next
We want the USB fixes in here as well for merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-15 15:00:11 +01:00
David Lechner
102402a73b ARM: da8xx: remove con_id from USB clocks
There is only one clock each for "musb-da8xx" and "ohci-da8xx", so we
do not the the con_id. Removing them  will also prevent needing an
unnecessary device tree property when device tree bindings are added
for clocks.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09 16:15:20 +01:00
Arvind Yadav
23bbeaef90 ARM: davinci: constify gpio_led
gpio_led are not supposed to change at runtime.
struct gpio_led_platform_data working with const gpio_led
provided by <linux/leds.h>. So mark the non-const structs
as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-01-05 19:28:41 +05:30
Julia Lawall
d6693b59eb ARM: davinci: drop unneeded newline
gpio_request uses its second argument as a label, so it doesn't seem
appropriate for it to have a newline.  Done using Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2018-01-05 19:25:14 +05:30
Linus Walleij
e535376537 i2c/ARM: davinci: Deep refactoring of I2C recovery
Alter the DaVinci GPIO recovery fetch to use descriptors
all the way down into the board files.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-12-31 00:09:39 +01:00
Vasyl Gomonovych
a8bc4f0a5d ARM: davinci: Use PTR_ERR_OR_ZERO()
Fix ptr_ret.cocci warnings:
arch/arm/mach-davinci/devices-da8xx.c:255:8-14: WARNING: PTR_ERR_OR_ZERO can be used
arch/arm/mach-davinci/devices-da8xx.c:300:8-14: WARNING: PTR_ERR_OR_ZERO can be used
arch/arm/mach-davinci/dm646x.c:952:8-14: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci

Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-12-23 15:46:25 +05:30
Bhumika Goyal
ab41910dfd ARM: davinci: make davinci_soc_info structures const
Make davinci_soc_info structures const as they are either passed to the
function davinci_common_init having the argument as const or their field
cpu_clks of type struct clk_lookup * is passed to the function
davinci_clk_init.

So, the fields are never modified and the structures can be const.

Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
[nsekhar@ti.com: minor commit message adjustment]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-12-23 15:46:24 +05:30
Bhumika Goyal
1a6d490b45 ARM: davinci: make argument to davinci_common_init() as const
Make the function argument of the function davinci_common_init
as const as it's memory contents are only copied during a
memcpy call. So, the fields of the structure to which the argument
soc_info points to never gets modified and therefore the argument can
be made const.
Add const to the prototype too.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-12-23 15:46:24 +05:30
Alejandro Mery
451df7d110 ARM: davinci: fix mmc entries in dm365's dma_slave_map
fix mmc entries in dm365's dma_slave_map to match the actual device names

Fixes: 0c750e1fe4 ("ARM: davinci: dm365: Add dma_slave_map to edma")
Signed-off-by: Alejandro Mery <amery@hanoverdisplays.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-12-08 16:12:21 +05:30
Alejandro Mery
621f96bcb4 ARM: davinci: Add dma_mask to dm365's eDMA device
Add dma_mask to dm365's EDMA device.

Without a valid dma_mask, EDMA on DM365 refuses to
probe.

Fixes: cef5b0da40 ("ARM: davinci: Add dma_mask to eDMA devices")
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Alejandro Mery <amery@hanoverdisplays.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-12-07 11:32:27 +05:30
Alejandro Mery
b638823a7b ARM: davinci: Use platform_device_register_full() to create pdev for dm365's eDMA
Convert the DM365 EDMA platform device creation to use
struct platform_device_info XXXXXX __initconst and
platform_device_register_full()

This will allow us to specify the dma_mask for the device
in an upcoming patch. Without this, EDMA on DM365 refuses
to probe.

Fixes: 7ab388e85f ("ARM: davinci: Use platform_device_register_full() to create pdev for eDMA")
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Alejandro Mery <amery@hanoverdisplays.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-12-07 11:16:51 +05:30
Linus Torvalds
527d147074 ARM: Device-tree updates for 4.15
We add device tree files for a couple of additional SoCs in various areas:
 
 Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for networking,
 Amlogic A113D for audio, and Renesas R-Car V3M for automotive.
 
 As usual, lots of new boards get added based on those and other SoCs:
 
  - Actions S500 based CubieBoard6 single-board computer
 
  - Amlogic Meson-AXG A113D based development board
  - Amlogic S912 based Khadas VIM2 single-board computer
  - Amlogic S912 based Tronsmart Vega S96 set-top-box
 
  - Allwinner H5 based NanoPi NEO Plus2 single-board computer
  - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers
  - Allwinner A83T based TBS A711 Tablet
 
  - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8
  - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500
      wireless access points and routers
 
  - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board
  - NXP i.MX53 based GE Healthcare PPD biometric monitor
  - NXP i.MX6 based Pistachio single-board computer
  - NXP i.MX6 based Vining-2000 automotive diagnostic interface
  - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants
 
  - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone
  - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet
 
  - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA
 
  - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board
  - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards
  - Renasas r8a7745 based iWave G22D-SODIMM SoM
 
  - Rockchip rk3288 based Amarula Vyasa single-board computer
 
  - Samsung Exynos5800 based Odroid HC1 single-board computer
 
 For existing SoC support, there was a lot of ongoing work, as usual
 most of that concentrated on the Renesas, Rockchip, OMAP, i.MX, Amlogic
 and Allwinner platforms, but others were also active.
 
 Rob Herring and many others worked on reducing the number of issues that
 the latest version of 'dtc' now warns about. Unfortunately there is still
 a lot left to do.
 
 A rework of the ARM foundation model introduced several new files
 for common variations of the model.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaDhcfAAoJEGCrR//JCVIngu0QAI2ntVotaOAOaCurNCnoVwI1
 j+eKwHGTawQRcSHWN8C+p4FzzaOmw+vvbOyewky8PWaDOCkK6yWEHRf3hb2la2jw
 j9prht28R1RAHIRPuah4SxKHYoT4VW9q/2hMHJ2BiNDOMX54xE7j2cUvWSsIRz5o
 id2QqKsp2OIDNQAXAA4N25FjdBCYvSik80panSdJITtJODIj6UfmcXSgqkoQ3TTV
 rwVyFtryl9Si3eyZYcfB2/0ILKuaMC8gl7IX9z+PkRqu9XN7i6bZKZlMMtpJqX3u
 Ad89kLkFqNhiwZ77bIoRRl+0NEoSu5hTPLHRqghS6gPfDY2JT6igf0rGC8twjfea
 fzGOBWr6NlIlUmR4smS0GyE/3YsfOQvYWjE+zx5qkmay30TORVTZBzsBR+kQJzKK
 tnbO1zvst1ECtk9e8np0di4NAo9rwM37dxpu4aspP1Umxw1K68VSNE3RhGl8UUwW
 oNvHa8hD8Ck0QDBNltrkmKBVoIYKRU3XhXrRXVjRQdu6Xitml0XYBi80V0h33EE3
 162UXDEMu1/aqRRZUtKw7+yozT8fqOHjH8Zrv2zCVGg0HEwVohcWv/BPXbrg0abJ
 wXYS8VocZJP6Nb4FQMe+cRbBUHoBgBQqbsF60tWiYsjv0zoc5hogLWcZYqzDcIO6
 06OBR3HgUW27urUn/JBu
 =TnSo
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM device-tree updates from Arnd Bergmann:
 "We add device tree files for a couple of additional SoCs in various
  areas:

  Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for
  networking, Amlogic A113D for audio, and Renesas R-Car V3M for
  automotive.

  As usual, lots of new boards get added based on those and other SoCs:

   - Actions S500 based CubieBoard6 single-board computer

   - Amlogic Meson-AXG A113D based development board
   - Amlogic S912 based Khadas VIM2 single-board computer
   - Amlogic S912 based Tronsmart Vega S96 set-top-box

   - Allwinner H5 based NanoPi NEO Plus2 single-board computer
   - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers
   - Allwinner A83T based TBS A711 Tablet

   - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8
   - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500
     wireless access points and routers

   - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board
   - NXP i.MX53 based GE Healthcare PPD biometric monitor
   - NXP i.MX6 based Pistachio single-board computer
   - NXP i.MX6 based Vining-2000 automotive diagnostic interface
   - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants

   - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone
   - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet

   - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA

   - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board
   - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards
   - Renasas r8a7745 based iWave G22D-SODIMM SoM

   - Rockchip rk3288 based Amarula Vyasa single-board computer

   - Samsung Exynos5800 based Odroid HC1 single-board computer

  For existing SoC support, there was a lot of ongoing work, as usual
  most of that concentrated on the Renesas, Rockchip, OMAP, i.MX,
  Amlogic and Allwinner platforms, but others were also active.

  Rob Herring and many others worked on reducing the number of issues
  that the latest version of 'dtc' now warns about. Unfortunately there
  is still a lot left to do.

  A rework of the ARM foundation model introduced several new files for
  common variations of the model"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits)
  arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3
  dt-bindings: bus: Add documentation for the Technologic Systems NBUS
  arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock
  ARM: dts: owl-s500: Add CubieBoard6
  dt-bindings: arm: actions: Add CubieBoard6
  ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock
  ARM: dts: owl-s500: Set power domains for CPU2 and CPU3
  arm: dts: mt7623: remove unused compatible string for pio node
  arm: dts: mt7623: update usb related nodes
  arm: dts: mt7623: update crypto node
  ARM: dts: sun8i: a711: Enable USB OTG
  ARM: dts: sun8i: a711: Add regulator support
  ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1
  ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1
  ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file
  ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes
  ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes
  ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes
  ARM: dts: sunxi: Add dtsi for AXP81x PMIC
  arm64: dts: allwinner: H5: Restore EMAC changes
  ...
2017-11-16 15:48:26 -08:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Suman Anna
933311fdfa ARM: davinci: da8xx-dt: Add OF_DEV_AUXDATA entry for DSP clock matching
Add the OF_DEV_AUXDATA entry needed to match the device-tree DSP node
to its non-device-tree clock, so that the da8xx-remoteproc driver can
properly enable the clocks. The device name has also been assigned
"davinci-rproc.0" to match the device id used in the da850_clks
clk_lookup array.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-09-20 14:57:56 +05:30
Boris Brezillon
d1f936d736 This pull request contains the following core changes:
* Fix memory leaks in the core
 * Remove unused NAND locking support
 * Rename nand.h into rawnand.h (preparing support for spi NANDs)
 * Use NAND_MAX_ID_LEN where appropriate
 * Fix support for 20nm Hynix chips
 * Fix support for Samsung and Hynix SLC NANDs
 
 and the following driver changes:
 
 * Various cleanup, improvements and fixes in the qcom driver
 * Fixes for bugs detected by various static code analysis tools
 * Fix mxc ooblayout definition
 * Add a new part_parsers to tmio and sharpsl platform data in order to
   define a custom list of partition parsers
 * Request the reset line in exclusive mode in the sunxi driver
 * Fix a build error in the orion-nand driver when compiled for ARMv4
 * Allow 64-bit mvebu platforms to select the PXA3XX driver
 -----BEGIN PGP SIGNATURE-----
 
 iQJABAABCAAqBQJZpwMZIxxib3Jpcy5icmV6aWxsb25AZnJlZS1lbGVjdHJvbnMu
 Y29tAAoJEGXtNgF+CLcAJEoP/jRnEjPznWT3+ngw6k/rnykkn/wexKV3iyX/6b71
 MQT/ZFuT3HsHnUjyprPvyRWJeKun6XyIH5fk7FlXIei9TaWCt6/UGTKousaPKeR2
 maggGeEjxGVpHJM/jpIYCyjt83zpezBqTupv52XhXxPaU7ROSpuHCd92YcPzIaT5
 tcn8JrI7TGuGlBrBbA2y8ZrPtuug3IKqUfpIiQmoqr0jzQR+AbZKHg0kk5a8piOn
 OguK67uhxeOvq831bGPehCPDbuE0loNi4CssayJ1HrisfS95kH/cqrveapgKsUG/
 fxaHh1i65I0lxa8sgUgeUiU04Zsy1YcgNbCj41AY4AHnjJ0+Qp1cV6KAB/x5/wH9
 ES/fW06how+1BLEeLvOr+rIQ41WeP0qV2H3r/PtkeswKKAV3gSERBXVHmg1E7Yum
 HkmPqzhu+nSk3mP7p3yxpd7EwWQh2xpvVYrfQ5vQbtdfm8Uw9n6S8x+O89ch9wWi
 +KbMWFsmF78nuRWW3WTsaiOFKcTRLBT5RoU2z4i9hCvQT2Pnx3SBhHrIj6xqBI1S
 8MpeDdlXHmRQfZxj+jDqU77JYqVEmy/5it9OjhjMpOqxfCf4K6Nlb75TEdR5Nh/9
 BA1qqTBEslg3UqS8ofGFHGFZWrW3JHf02SYo2zU9IvBninh3HrqHiFhBc3p1xNDE
 7GwD
 =bC1+
 -----END PGP SIGNATURE-----

Merge tag 'nand/for-4.14' of git://git.infradead.org/l2-mtd into mtd/next

From Boris:
"
This pull request contains the following core changes:

* Fix memory leaks in the core
* Remove unused NAND locking support
* Rename nand.h into rawnand.h (preparing support for spi NANDs)
* Use NAND_MAX_ID_LEN where appropriate
* Fix support for 20nm Hynix chips
* Fix support for Samsung and Hynix SLC NANDs

and the following driver changes:

* Various cleanup, improvements and fixes in the qcom driver
* Fixes for bugs detected by various static code analysis tools
* Fix mxc ooblayout definition
* Add a new part_parsers to tmio and sharpsl platform data in order to
  define a custom list of partition parsers
* Request the reset line in exclusive mode in the sunxi driver
* Fix a build error in the orion-nand driver when compiled for ARMv4
* Allow 64-bit mvebu platforms to select the PXA3XX driver
"
2017-09-01 15:34:30 +02:00
Boris Brezillon
d4092d76a4 mtd: nand: Rename nand.h into rawnand.h
We are planning to share more code between different NAND based
devices (SPI NAND, OneNAND and raw NANDs), but before doing that
we need to move the existing include/linux/mtd/nand.h file into
include/linux/mtd/rawnand.h so we can later create a nand.h header
containing all common structure and function prototypes.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Peter Pan <peterpandong@micron.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Han Xu <han.xu@nxp.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-By: Harvey Hunt <harveyhuntnexus@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
2017-08-13 10:11:49 +02:00
Arnd Bergmann
31d5cf1476 ARM: davinci: normalize clk API
davinci still has its own clk implementation, but lacks
a clk_get_parent() helper, which can lead to link errors
in randconfig builds.

This adds the usual implementation.

Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-27 13:15:29 +02:00
Arnd Bergmann
8b9740178f ARM: davinci: don't mark vpif_input structures as 'const'
A change to the platform data definitions caused a warning in the board code:

arch/arm/mach-davinci/board-da850-evm.c:1221:13: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
arch/arm/mach-davinci/board-da850-evm.c:1231:13: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]

This is a bit unfortunate, since we generally like structure definitions to
be const, but as this is legacy code, the easiest way out is still to
remove the 'const' annotation here.

Fixes: 4a5f8ae50b ("[media] davinci: vpif_capture: get subdevs from DT when available")
Fixes: 231ce279e6 ("ARM: davinci: fix const warnings")
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-27 13:13:26 +02:00
Linus Torvalds
c7d28eca1d This is the bulk of GPIO changes for the v4.13 series:
Core:
 - Export add/remove for lookup tables so that modules can export GPIO
   descriptor tables.
 - Handle GPIO sleep states: it is now possible to flag that a GPIO line
   may loose its state during suspend/resume of the system to save
   power. This is used in the Wolfson Micro Arizona driver.
 - ACPI-based GPIO was tightened up a lot around the edges.
 - Use bitmap_fill() to speed up a loop.
 
 New drivers:
 - Exar XRA1403 SPI-based GPIO.
 - MVEBU driver now supports Armada 7K and 8K.
 - LP87565 PMIC GPIO.
 - Renesas R-CAR R8A7743 (RZ/G1M).
 - The new IOT2040 8250 serial/GPIO also comes in through this
   changeset.
 
 Substantial driver changes:
 - Seriously fix the Exar 8250 GPIO portions to work.
 - The MCP23S08 was moved out to a pin control driver.
 - Convert MEVEBU to use regmap for register access.
 - Drop Vulcan support from the Broadcom driver.
 - Serious cleanup and improvement of the mockup driver, giving us a
   better test coverage.
 
 Misc:
 - Lots of janitorial clean up.
 - A bunch of documentation fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZX1MjAAoJEEEQszewGV1zEYUQALFsjJH7D2mRN4TSSEeVAcYr
 Uz52uupsou8tgW0IupRb/khO+V6zgd7j+kHDJLMxX+rCTw3pTq5+XGyi5+iNpxof
 TIIT1XBx4eq7Q/n4nWdGodHbHN9BXw7cGsNmTb1TS/G/6h1wOKxfzjvUNhDAC+2v
 idPy6B5G+WrDsYpBtTWlKHKQKVqbUlhLFyJYoglzqIeM5L9Ry/UoZ6sGleho3hKn
 Vlg/hMtkCexnVO9zopBe5CuEfseLrkcCgCvtQ713egzVXApryp4hqm3Xti20Ntgy
 OxnKhmVyloqd0kU0qLSpvDAf7B1invbHHbeZsag6wluTMrxgUYJONuonrqGeGiwB
 FBDtw9SGn2GlEXcs7sg8ANmAyr2XxxezKXD9XLBL5jadNB2KCY5yKMv1IK3VnYdq
 gEpFAiZ5cmlpZxIXqlyeZP6LKHNTci4amb33x1I/ghH2BTkGQ/3E3anXEbPNWF8G
 DDE6nrSgU0oQcNqRHyZaWNZpUIz4aFUgJtOEO4lYYP4+VzYSKTdrHseTiiJ91J7E
 WBz9p5JvSnB22+60RhyTAPjVjXgWa30nidf7WGCK0UHiIYffihCxGZRTlrhoEEUB
 fXgveJpqxLopYvxpUxi1OqlPYYo7zKRF5BzHsjKMpdVYXfdMdvs7eq2g/X889i1D
 WpbE9LyAH9FY5BM8YjFX
 =TpW1
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.13 series.

  Some administrativa:

  I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO
  driver coming in through this tree, along with a whole bunch of Exar
  8250 fixes. These are ACKed by Greg and also hit drivers/platform/*
  where they are ACKed by Andy Shevchenko.

  Speaking about drivers/platform/* there is also a bunch of ACPI stuff
  coming through that route, again ACKed by Andy.

  The MCP23S08 changes are coming in here as well. You already have the
  commits in your tree, so this is just a result of sharing an immutable
  branch between pin control and GPIO.

  Core:
   - Export add/remove for lookup tables so that modules can export GPIO
     descriptor tables.
   - Handle GPIO sleep states: it is now possible to flag that a GPIO
     line may loose its state during suspend/resume of the system to
     save power. This is used in the Wolfson Micro Arizona driver.
   - ACPI-based GPIO was tightened up a lot around the edges.
   - Use bitmap_fill() to speed up a loop.

  New drivers:
   - Exar XRA1403 SPI-based GPIO.
   - MVEBU driver now supports Armada 7K and 8K.
   - LP87565 PMIC GPIO.
   - Renesas R-CAR R8A7743 (RZ/G1M).
   - The new IOT2040 8250 serial/GPIO also comes in through this
     changeset.

  Substantial driver changes:
   - Seriously fix the Exar 8250 GPIO portions to work.
   - The MCP23S08 was moved out to a pin control driver.
   - Convert MEVEBU to use regmap for register access.
   - Drop Vulcan support from the Broadcom driver.
   - Serious cleanup and improvement of the mockup driver, giving us a
     better test coverage.

  Misc:
   - Lots of janitorial clean up.
   - A bunch of documentation fixes"

* tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits)
  serial: exar: Add support for IOT2040 device
  gpio-exar/8250-exar: Make set of exported GPIOs configurable
  platform: Accept const properties
  serial: exar: Factor out platform hooks
  gpio-exar/8250-exar: Rearrange gpiochip parenthood
  gpio: exar: Fix iomap request
  gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards
  serial: uapi: Add support for bus termination
  gpio: rcar: Add R8A7743 (RZ/G1M) support
  gpio: gpio-wcove: Fix GPIO control register offset calculation
  gpio: lp87565: Add support for GPIO
  gpio: dwapb: fix missing first irq for edgeboth irq type
  MAINTAINERS: Take maintainership for GPIO ACPI support
  gpio: exar: Fix reading of directions and values
  gpio: exar: Allocate resources on behalf of the platform device
  gpio-exar/8250-exar: Fix passing in of parent PCI device
  gpio: mockup: use devm_kcalloc() where applicable
  gpio: mockup: add myself as author
  gpio: mockup: improve the error message
  gpio: mockup: don't return magic numbers from probe()
  ...
2017-07-07 12:40:27 -07:00
Linus Torvalds
8ca302e9c6 ARM: SoC platform updates
SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
 for a few platforms:
 
 - Andres Färber adds initial support for the Actions Semi S500 (a.k.a.
   'owl') platform, a close relative of the S900 platform he adds for arm64.
 
 - in mach-omap2, we remove more legacy code
 
 - Rockchips gains support for the RV1108 SoC designed for camera
   applications.
 
 - For Atmel, we gain support for MMU-less SoCs (SAME70/V71/S70/V70)
 
 - Minor updates for other platforms, including davinci, s3c64xx,
   prima2, stm32, broadcom nsp, amlogic, pxa, imx and renesas
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWVo7+GCrR//JCVInAQKbMA//WeEPEDUt0boJCUfuzXfZ35S5ksBMBGQa
 NaOJvcW3T//7Tfa88YlBEB7h1w22u1Sv4/CfcistdSPbUwZLyYo6aUz53AwlUnLs
 bVHnd8+h1xN6qSDjzOPIEQQHg9OVIRBD49moBgJ1BkXzyqR/RI1jPPyyRl5vucSW
 MYRxhPkplmjFL5+6uvFoSOdd3Z/FLoEYRrkIk4iu+KgKtnNlj4P1FNSdm6Yb29dj
 yzmXoSpxEzbq0ahGlkjrekEJxTWvW1vOq9d+xTKwTbXoM7pbzXnBRzx4q2Fg9GAT
 BJseMx+uDEG/+eYrFZA7jX/HgpKB1fAlCGp+dK6GIcJoEM6lFKJRsJrP702KPzg0
 PqOMM/htq/4hZ7Waz+Yj3lyVF2C+A6Dn/fXPaHJGdTLj4r0OLgZayhBXFHp1VX2G
 9ERx1UCnfxeY91VBUM99qo21ECT7j0C/bZLln8MFjwX8tk3OATkElIAtnsEHxJ5d
 v4TEkI/AcpMW4lMj/u/hp1PJMCvhlSreWPGx1PRax6va+YB5Ov19DshVgyfoTTq9
 kArUJWQdKo4aKqB+feg9NHNC01xSLw5ywKb+oIyYP3jZzMexzRyP5L7EAVOu6Cel
 iHeIRpo8VjX63gltE+9u4aZ/aEMREGVcgkzuwBTKqbVQ3ismrmGYe54VnFAushJS
 m+XSB250Vz8=
 =8F3w
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
  for a few platforms:

   - Andres Färber adds initial support for the Actions Semi S500 (aka
     'owl') platform, a close relative of the S900 platform he adds for
     arm64.

   - in mach-omap2, we remove more legacy code

   - Rockchips gains support for the RV1108 SoC designed for camera
     applications.

   - For Atmel, we gain support for MMU-less SoCs (SAME70/V71/S70/V70)

   - Minor updates for other platforms, including davinci, s3c64xx,
     prima2, stm32, broadcom nsp, amlogic, pxa, imx and renesas"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (74 commits)
  ARM: owl: smp: Drop bogus holding pen
  ARM: owl: Drop custom machine
  ARM: owl: smp: Implement SPS power-gating for CPU2 and CPU3
  soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating
  soc: actions: Add Owl SPS
  dt-bindings: power: Add Owl SPS power domains
  MAINTAINERS: Update Actions Semi section with SPS
  ARM: owl: Implement CPU enable-method for S500
  MAINTAINERS: Add Actions Semi Owl section
  ARM: Prepare Actions Semi S500
  ARM: socfpga: Increase max number of GPIOs
  ARM: stm32: Introduce MACH_STM32F469 flag
  ARM: prima2: remove redundant select CPU_V7
  ARM: davinci: fix const warnings
  ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ALWAYS_ON
  ARM: OMAP4: hwmod_data: add SHAM crypto accelerator
  ARM: OMAP4: hwmod data: add des
  ARM: OMAP4: hwmod data: add aes2
  ARM: OMAP4: hwmod data: add aes1
  ARM: pxa: Delete an error message for a failed memory allocation in pxa3xx_u2d_probe()
  ...
2017-07-04 14:34:51 -07:00
Kevin Hilman
231ce279e6 ARM: davinci: fix const warnings
After VPIF was converted to enable getting subdevs from DT, the
pdata is no longer const, so remove these to avoid compiler warnings.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
[nsekhar@ti.com: minor commit message fixup]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-06-15 19:18:24 +05:30
Wolfram Sang
b6480faeee gpio: pcf857x: move header file out of I2C realm
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-23 11:35:02 +02:00
Suman Anna
14ff86bc76 ARM: davinci: da8xx: Add DSP internal RAM memories as IOMEM resources
The DSP subsystem on DA8xx has various internal RAM memories that can
accessed from the ARM side. These memories can be configured to be
used as either RAM or Cache. Add these memories as IOMEM resources
to the DSP device so that the driver can support loading of images
into internal memories.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-05-22 14:47:44 +05:30
Suman Anna
6724a05ff3 ARM: davinci: da8xx: Add names to DSP IOMEM resources
Add names to the IOMEM resources for the DSP device present on
DA8xx SoCs. This will facilitate the driver to use the names and
be agnostic of the resource order, and facilitate scalable DT
support in follow-up patches.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-05-22 14:47:44 +05:30
Suman Anna
f97f03578b ARM: davinci: da8xx: Create DSP device only when assigned memory
The DSP device on Davinci platforms does not have an MMU and requires
specific DDR memory to boot. This memory is reserved using the rproc_mem
kernel boot parameter and is assigned to the device on non-DT boots.
The remoteproc core uses the DMA API and so will fall back to assigning
random memory if this memory is not assigned to the device, but the DSP
remote processor boot will not be successful in such cases. So, check
that memory has been reserved and assigned to the device specifically
before even creating the DSP device.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-05-22 14:47:44 +05:30
Christophe JAILLET
95d7c1f18b ARM: davinci: PM: Do not free useful resources in normal path in 'davinci_pm_init'
It is wrong to iounmap resources in the normal path of davinci_pm_init()

The 3 ioremap'ed fields of 'pm_config' can be accessed later on in other
functions, so we should return 'success' instead of unrolling everything.

Fixes: aa9aa1ec2d ("ARM: davinci: PM: rework init, remove platform device")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[nsekhar@ti.com: commit message and minor style fixes]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-05-17 15:25:18 +05:30
Christophe JAILLET
f3f6cc814f ARM: davinci: PM: Free resources in error handling path in 'davinci_pm_init'
If 'sram_alloc' fails, we need to free already allocated resources.

Fixes: aa9aa1ec2d ("ARM: davinci: PM: rework init, remove platform device")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-05-17 14:51:49 +05:30
Linus Torvalds
8d648aad05 ARM: SoC platform updates
SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
 for a few platforms:
 
 * Gemini:
  - Legacy platform that Linus Walleij has converted to multiplatform
    and DT, so a handful of various tweaks there, removal of some old
    stale support, etc.
 
 * Atmel AT91:
  - Fixup of various power management related pieces
  - Move of SoC detection to a drivers/soc driver instead
 
 * ST Micro STM32:
  - New SoC support: STM32H743
 
 * TI platforms:
  - More driver support for Davinci (SATA in particular)
  - Removal of some old stale hwmod files (linkspace platform)
 
 * Misc:
  - A couple of smaller patches for i.MX, sunxi, hisi
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZEANUAAoJEIwa5zzehBx3XS8P/0qIIbAW2UvPMTN7ONVAarQL
 Ri+ZfmxxUmgWBkXEV6XICrwGwwH8l87o8+TLvQZbPmSnZa9gxT8/OF8smQhYhGqr
 5hpmRpg2yhssLgxMaL9YQtwl7Au/EvYHgvVPaE6UxI/DEN1QzDiI4x0gsEu5f4oz
 3cLh1JqFnP5X0j0wdtsn4B21dQGbqQsUVbqysq48NYHuDOlbwfUj2f8y8TMmCVBP
 gn736jHUxinQd4vDUFiSmVflNPS2ApaIaVs1KTedmkFA3yZMJUNVp6QqDc+Xpk8l
 tIMcrSdATckgIIgbs2bCBQr4Ji4jkyWnlR1rqsg1GKCP+OQdnnTyEEzWOwW2KXRF
 faSr+CKB9mM79TZkRdjV494uwbc8Xg+JnfTHLAaO8fmMmNE8z5pnTNw2RBnS6BIk
 wpgUVEcCJWEzUodNhuByB328qUXhQ716N3jYb+IN9vEv1MbjuGpsH/DC9EkMv0+k
 cLuhiNmLVbIfHX3u6xTsqtVWjipV0D0cb7WI1a4SZHx/hTmlKc7Q4/wQXH1IykDA
 Y/36NG+jxIjx7a3sFc59LoIvuZOkuGf3EaSSxsrbt3/mFdKXjdq0vNCiluVpSakZ
 2rzzKePktKr//PxYVB7tvpSs9f/IBpsiy47NDxVvH2DvtohfhEnVxTIKZQiA01U4
 sjVToA5ovDHJAne9sIAB
 =ZdtJ
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
  for a few platforms:

  Gemini:
   - Legacy platform that Linus Walleij has converted to multiplatform
     and DT, so a handful of various tweaks there, removal of some old
     stale support, etc.

  Atmel AT91:
   - Fixup of various power management related pieces
   - Move of SoC detection to a drivers/soc driver instead

  ST Micro STM32:
   - New SoC support: STM32H743

  TI platforms:
   - More driver support for Davinci (SATA in particular)
   - Removal of some old stale hwmod files (linkspace platform)

  Misc:
   - A couple of smaller patches for i.MX, sunxi, hisi"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
  ARM: davinci: Add clock for CPPI 4.1 DMA engine
  ARM: mxs: add support for I2SE Duckbill 2 boards
  MAINTAINERS: Update the Allwinner sunXi entry
  ARM: i.MX25: globally disable supervisor protect
  ARM: at91: move SoC detection to its own driver
  ARM: at91: pm: correct typo
  ARM: at91: pm: Remove at91_pm_set_standby
  ARM: at91: pm: Merge all at91sam9*_pm_init
  ARM: at91: pm: Tie the USB clock mask to the pmc
  ARM: at91: pm: Tie the memory controller type to the ramc id
  ARM: at91: pm: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.
  ARM: at91: pm: Simplify at91rm9200_standby
  ARM: at91: pm: Use struct at91_pm_data in pm_suspend.S
  ARM: at91: pm: Move global variables into at91_pm_data
  ARM: at91: pm: Move at91_ramc_read/write to pm.c
  ARM: at91: pm: Cleanup headers
  MAINTAINERS: Add memory drivers to AT91 entry
  MAINTAINERS: Update AT91 entry
  ARM: davinci: add pata_bk3710 libata driver support
  ARM: OMAP2+: mark omap_init_rng as __init
  ...
2017-05-09 09:49:36 -07:00
Alexandre Bailon
398dbc776a ARM: davinci: Add clock for CPPI 4.1 DMA engine
The CPPI 4.1 DMA in USB subsystem shares its clock with the
USB OTG, and most of the time, the clock will be enabled by
USB.  But during the init of the DMA, USB is not enabled
(waiting for DMA), and then we must enable the DMA clock
before doing anything.

Add clock for the CPPI 4.1 DMA engine.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
[nsekhar@ti.com: minor commit message tweaks]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-04-11 19:50:53 +05:30
Sekhar Nori
28d4d1d0e4 ARM: davinci: add pata_bk3710 libata driver support
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
[b.zolnierkie: split from bigger patch + preserved old driver support]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2017-03-30 16:15:29 +05:30
Bartosz Golaszewski
a16cb91ad9 [media] media: vpif: use a configurable i2c_adapter_id for vpif display
The vpif display driver uses a static i2c adapter ID of 1 but on the
da850-evm board in DT boot mode the i2c adapter ID is actually 0.

Make the adapter ID configurable like it already is for vpif capture.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-22 11:55:56 -03:00
Bartosz Golaszewski
9922848133 ARM: davinci: add pdata-quirks for da850-evm vpif display
Similarly to vpif capture: we need to register the vpif display driver
and the corresponding adv7343 encoder in pdata-quirks as the DT
support is not complete - there isn't currently a way to define the
output_routing in the V4L2 drivers (c.f. s_routing) via DT.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-03-07 16:43:19 +05:30
Bartosz Golaszewski
e503eaa314 ARM: da850-evm: add a fixed regulator for the UI board IO expander
Without this regulator the tca6416 GPIO expander on the UI board can't
be probed in board file mode and we're not getting VPIF IRQs.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-03-07 16:43:18 +05:30
Kevin Hilman
7ee7719414 ARM: davinci: da8xx: add pdata-quirks for VPIF capture
For da8xx DT platforms, use pdata-quirks to add legacy platform data for
vpif_capture driver.

Passing legacy platform_data is required until the V4L2 framework, and
subdevice drivers (such as the tvp514x) grow a way of selecting input
and output routing  (c.f. V4L2 s_routing API)

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
[Bartosz:
    - removed unnecessary #ifdefs
    - split the init function into two separate routines for the lcdk
      and evm boards]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-03-07 16:43:17 +05:30
Kevin Hilman
79617a528b ARM: davinci: da8xx: add OF_DEV_AUXDATA() for vpif
This is needed for the driver to access the vpif clock.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
[Bartosz: split the pdata-quirks patch in two with one
          adding the OF_DEV_AUXDATA entry]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-03-07 16:43:16 +05:30
Kevin Hilman
ce932a0bee ARM: davinci: board-da850-evm: add I2C ID for VPIF
VPIF capture driver now has a way to specific I2C adapter ID (was
previously hard-coded.)  Use the new interface.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-03-07 16:43:15 +05:30
Bartosz Golaszewski
d2e04b1f90 ARM: davinci: allow having multiple pdata-quirks
We currently bail-out after applying a single quirk. We will want
to reuse the function doing the vpif capture registration so remove
the break; and continue iterating over the quirk array.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-03-07 16:43:01 +05:30
Geert Uytterhoeven
b23b29506a ARM: davinci: PM: Drop useless check for PM_SUSPEND_STANDBY
As DaVinci uses the standard suspend_valid_only_mem() for its
platform_suspend_ops.valid() callback, its platform_suspend_ops.enter()
callback will never be called with state equal to PM_SUSPEND_STANDBY.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-03-06 17:06:42 +05:30
Linus Torvalds
6ae52c65e0 ARM: SoC platform updates
In the SoC branch we normally collect classic arch/arm/mach-* contents, i.e.
 C code changes for SoC platforms. This release cycle the diffstat is quite
 nice, in that we're removing 3x the amount of code that's being added.
 
 The main reason for this is that there's a removal of camera drivers for
 Freescale i.MX chips (driver was removed so the device registration isn't
 needed any more). There's also removal of display initialization code for OMAP
 that is no longer needed.
 
 The rest are mostly minor tweaks and cleanups; constification on Samsung
 platforms, cleanup of ux500 platform data, purge of other unused platform
 data/device seutp on i.MX and other good stuff.
 
 New SoC support this cycle is for two Allwinner platforms, H2+ and V3s.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYrMs4AAoJEIwa5zzehBx34LQP/j/pzJOw2cLr0iiHwNl/3jyC
 XFt/F6NFfPuBOCldUoMsZzD2lOR1Qbhp96fAQtDzs/HkGRVxokcHRVJC1QWozSkt
 18wm8tc4HtLvjWoeXyh3zFvwl4wiqx4d4r4yxw1wZKA0uhEXrSNJu4P/RgtXH4SK
 TycfodE35kJ8wCxLNXYr1vaAMKgjmBkk8DAQa5t6XXBnSLGJmNAa5+vCJKab1im+
 9mOZ1EigtrkRR6eL6OJmru3MaZYLg7q+oxq5i/5NOIOZsCWq6Wk4r+5HnTg+8aVf
 QVs766sEjwZJ5ozZYhYucp8pvQhyatG36vwB51x1XlTA4XzAJwMEgPAtb5Pc/owU
 cst8d4m24Gc7oChcxlbmrqK64hpF1s5LK/ZbfdLPHaK1PS/ng/teHfVA2Q2HXwur
 HcHA8dDqgTVCNcCpLX1OgBUbq9S0aopuL9bdeg6q6fU8Skb49BmeHK2Iji3MZSkO
 8XdY8H7oKtkwLFx18GJzmdXtH55vIXpHYMvgpjMaWAujtoqZCZ7+GHCmM3GyNCrF
 +KzJMVdx1lg6yYhfo4rZBWGzK2CrHvq5u5Vq7GExxhVCPsOx3mRQQ0JY/adGWU/y
 WTCbogwxUNbjlugffwQa+dYdF2KU2kAHAyEFDITndZmp60xJohWPYVJw+7imF5wR
 0Qbcj6OvffBcaTdxKzTE
 =YE8v
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "In the SoC branch we normally collect classic arch/arm/mach-*
  contents, i.e. C code changes for SoC platforms. This release cycle
  the diffstat is quite nice, in that we're removing 3x the amount of
  code that's being added.

  The main reason for this is that there's a removal of camera drivers
  for Freescale i.MX chips (driver was removed so the device
  registration isn't needed any more). There's also removal of display
  initialization code for OMAP that is no longer needed.

  The rest are mostly minor tweaks and cleanups; constification on
  Samsung platforms, cleanup of ux500 platform data, purge of other
  unused platform data/device seutp on i.MX and other good stuff.

  New SoC support this cycle is for two Allwinner platforms, H2+ and
  V3s"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits)
  ARM: ux500: remove deleted file from Makefile
  ARM: ep93xx: Disable TS-72xx watchdog before uncompressing
  ARM: ux500: cut some platform data
  MAINTAINERS: Update for the current location of the bcm2835 tree.
  ARM: davinci: remove BUG_ON() from da850_register_sata()
  ARM: davinci: da850: model the SATA refclk
  ARM: davinci: da850: add con_id for the SATA clock
  ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA
  arm: mvebu: support for SMP on 98DX3336 SoC
  dt-bindings: video: exynos7-decon: Remove obsolete samsung,power-domain property
  soc: dove: constify reset_control_ops structures
  ARM: mv78xx0: fix possible PCI buffer overflow
  MAINTAINERS: transfer maintainership for the EZX platform
  ARM: shmobile: rcar-gen2: Add more register documentation
  ARM: tegra: paz00: Fix __initdata placement
  ARM: OMAP: clock: Remove unused mpurate cmdline option
  ARM: davinci: add skeleton for pdata-quirks
  arm: sunxi: add support for V3s SoC
  ARM: OMAP2+: omap_hwmod: Add support for earlycon
  arm: hisi: drop extern hip01_cpu_die
  ...
2017-02-23 15:33:54 -08:00
Linus Torvalds
af8999f672 ARM: SoC non-urgent fixes for merge window
We sometimes collect non-critical fixes that come in during the later part
 of the merge window in a branch for the next release instead, and this is
 that contents for v4.11.
 
 Most of these are OMAP fixes, dealing with OMAP36/37 detection, quirks
 and setup. There's also some fixes for Davinci and a Kconfig fix for SCPI
 to only enable on ARM{,64}.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYrMlHAAoJEIwa5zzehBx3oZ4P/3nRgb4dtwEwXwFmJf8Xd4nu
 yetQbcwRreHvh8utsU2Pe+8tffV8jLgsW8TxZ43d6deYFii046HhZAXtvTTVgFpE
 OA0fJpNJ00KYqP1Nx5q/kwZoH3uBz442uMUQ9lyziB3RpimhRsiKyHwnTyuWljyx
 hPmO1XKcF6pQBXk1uwOzO1lSDUeOn4eAmeLonlG1gQ5qtrkU0WbrTPxpmn/CB546
 LH5Nj0qVRzEa7xr8O+2nzeKPVwcXGwsKVKCDbSJmsey2KOEDnEjjxpToAh3WnA4W
 Tm1av5QdyqsLVqAMkNYezrS8EzBjRKa1ma4xUqsNoIhO1XI7xa/LkonU8a0+ZdSX
 p48DCvv7IHX5IqdIHHB0s1eICvTsW8Cp/4YUJzuZDFbS9B2t5b3412+n43tVa8l3
 HYPeTzL5S3VOrMtpQKkGAFrw5OGm+URy4CYQxpX5DxSRSqvXTj12ajBHRbfdbzCO
 r2i2rhKL07PF3DAf8L1coHcBQDS7Vc/k+fhKCQy+W1RDxmjYwYKSI9agOyZi1HQ7
 X+0HuUyKTthCE2kUrj4rye/87MffWwdjNgnOZiHR1X7YtWgnjp1g9K+mLZHh/y5m
 Tq/M55cK9h6dOghx121jYFkkvDclEQDemJuDbKY0sEMDrDXtppcI/T+znZ1LTq7i
 1eaK4lTyAX7dbQJUQCwe
 =NhZq
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC non-urgent fixes from Arnd Bergmann:
 "We sometimes collect non-critical fixes that come in during the later
  part of the merge window in a branch for the next release instead, and
  this is that contents for v4.11.

  Most of these are OMAP fixes, dealing with OMAP36/37 detection, quirks
  and setup. There's also some fixes for Davinci and a Kconfig fix for
  SCPI to only enable on ARM{,64}"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  firmware: arm_scpi: Add hardware dependencies
  ARM: OMAP3: Fix SoC detection of OMAP36/37 Family
  ARM: OMAP5: Add HWMOD_SWSUP_SIDLE_ACT flag for UART
  ARM: dts: Fix compatible for ti81xx uarts for 8250
  ARM: dts: Fix am335x and dm814x scm syscon to probe children
  ARM: OMAP2+: Fix init for multiple quirks for the same SoC
  ARM: dts: Fix omap3 off mode pull defines
  bus: da850-mstpri: fix my e-mail address
  ARM: davinci: da850: fix da850_set_pll0rate()
  ARM: davinci: da850: coding style fix
2017-02-23 15:28:04 -08:00
Linus Torvalds
e30aee9e10 char/misc driver patches for 4.11-rc1
Here is the big char/misc driver patchset for 4.11-rc1.
 
 Lots of different driver subsystems updated here.  Rework for the hyperv
 subsystem to handle new platforms better, mei and w1 and extcon driver
 updates, as well as a number of other "minor" driver updates.  Full
 details are in the shortlog below.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWK2iRQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynhFACguVE+/ixj5u5bT5DXQaZNai/6zIAAmgMWwd/t
 YTD2cwsJsGbTT1fY3SUe
 =CiSI
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver patchset for 4.11-rc1.

  Lots of different driver subsystems updated here: rework for the
  hyperv subsystem to handle new platforms better, mei and w1 and extcon
  driver updates, as well as a number of other "minor" driver updates.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
  goldfish: Sanitize the broken interrupt handler
  x86/platform/goldfish: Prevent unconditional loading
  vmbus: replace modulus operation with subtraction
  vmbus: constify parameters where possible
  vmbus: expose hv_begin/end_read
  vmbus: remove conditional locking of vmbus_write
  vmbus: add direct isr callback mode
  vmbus: change to per channel tasklet
  vmbus: put related per-cpu variable together
  vmbus: callback is in softirq not workqueue
  binder: Add support for file-descriptor arrays
  binder: Add support for scatter-gather
  binder: Add extra size to allocator
  binder: Refactor binder_transact()
  binder: Support multiple /dev instances
  binder: Deal with contexts in debugfs
  binder: Support multiple context managers
  binder: Split flat_binder_object
  auxdisplay: ht16k33: remove private workqueue
  auxdisplay: ht16k33: rework input device initialization
  ...
2017-02-22 11:38:22 -08:00
Arnd Bergmann
af1d09eefa SoC updates needed for SATA support on
DA850.
 
 This includes a merge of non-critical-fixes
 branch already queued for v4.11 because
 SATA clock addition conflicts with the fix-up
 done earlier.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYkyhWAAoJEGFBu2jqvgRNxVIP/AubsIhdO2n2uBoxUpKfwfux
 nZMcxkSvZ5yFdhCg+mxCJA9rDBRvuKKp1zHUiG6tM3feK/0Y2zB/zhhq6hEY0Mpq
 s+wuNHKGYwqDlFO5UXfFO/g0p+c07KxcCaW365f7Y4nxTViZiJpgVCkMVi73yfHh
 s6EZHtSKg6gMI+uAq7BqPnTX69KIDmJlvYC+zMPomLVgNcUOQUac6Rg0pdIWzDSx
 kgLZACJ6jslooyDfikPUEn+G9b2hVSE4QdodZKokuh7tnSUatcBe9Ke6wJaRCa5p
 8YGcd2yi+FKBsYlYJqZW5+Q7rC083yHhO0uqA/qgl8Id/Hd1Grb7tFqmOjXCJXU4
 qHqkXSYlEN5Aze6/8Hr39GBbsJhinLzomkaSE6oDZxB/+KBQikae33E2oLqt2Qj2
 ZxvofVGuIEtubs/OTS7k5XLYnBn4TNUCu2vcxDeFcR7ui5JYIQdmkUc0t/DAEcyB
 JX/9Wc4GX5T+D3pmJTwaFiE+4jkJs/99XNL2LNc7DeVaLDWc62wBxoWHzEojA3MK
 wR1/06/5ijSHPAQHXWkzXAtV3zTONSHLsDlf1r4zHj5nvejWFnkEzTaQnKL5fkkC
 rhUwYLpjvlu5gJV6/xrv0vx205BzQwQNcmb8SJENd0PWElPhwDnAjD6WkidBvirt
 OMjR6JP81oYAuXomYA9Z
 =YWs4
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v4.11/soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc

Pull "SoC updates needed for SATA support on DA850" from Sekhar Nori:

This includes a merge of non-critical-fixes
branch already queued for v4.11 because
SATA clock addition conflicts with the fix-up
done earlier.

* tag 'davinci-for-v4.11/soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: remove BUG_ON() from da850_register_sata()
  ARM: davinci: da850: model the SATA refclk
  ARM: davinci: da850: add con_id for the SATA clock
  ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA
  ARM: davinci: add skeleton for pdata-quirks
  bus: da850-mstpri: fix my e-mail address
  ARM: davinci: da850: fix da850_set_pll0rate()
  ARM: davinci: da850: coding style fix
2017-02-16 17:15:39 +01:00
Ulf Hansson
981f18e646 ARM: davinci: Don't rely on public mmc header to include interrupt.h
The davinci board omapl138-hawk, depends on interrupt.h. Explicitly include
it instead of relying on the public mmc header host.h.

Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
2017-02-13 13:20:18 +01:00
Ulf Hansson
f46f335cb4 ARM: davinci: Don't rely on public mmc header to include leds.h
Some of the davinci boards, da850-evm, dm644x-evm and neuros-osd2 depends
on leds.h. Explicitly include it instead of relying on the public mmc
header host.h.

Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
2017-02-13 13:20:17 +01:00
Bartosz Golaszewski
a303588685 ARM: davinci: remove BUG_ON() from da850_register_sata()
The ahci driver now supports other refclk clock rates.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-31 20:48:25 +05:30
Bartosz Golaszewski
00bacfbfaf ARM: davinci: da850: model the SATA refclk
Register a fixed rate clock modelling the external SATA oscillator
for da850 (both DT and board file mode).

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-31 20:48:24 +05:30
Bartosz Golaszewski
8ba0f6caa4 ARM: davinci: da850: add con_id for the SATA clock
The ahci-da850 SATA driver is now capable of retrieving clocks by
con_id. Add the connection id for the sysclk2-derived SATA clock.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-31 20:48:23 +05:30
Sekhar Nori
b88a107654 Merge branch 'v4.11/fixes-non-critical' into v4.11/soc
This merge is because patches in branch v4.11/soc conflict
with cleanup done as part of 0a5011673a ("ARM: davinci:
da850: coding style fix") that is already queued as a
non-critical fix.
2017-01-31 20:45:32 +05:30
Bartosz Golaszewski
57a66aafda ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA
This entry is needed for the ahci driver to get a functional clock.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[nsekhar@ti.com: subject line adjustment]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-31 16:29:42 +05:30
Kevin Hilman
9c9b1bc252 ARM: davinci: add skeleton for pdata-quirks
Add skeleton pdata-quirks for davinci.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
[nsekhar@ti.com: move changes to build pdata-quirks.c and call
		 to pdata_quirks_init() to this patch]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-23 20:52:38 +05:30
Bartosz Golaszewski
d8e22fb4cc ARM: da850: add the nand dev_id to the clock lookup table
The aemif driver can now access struct of_dev_auxdata (using platform
data).

Add the device id to the clock lookup table for the nand clock and
create a separate lookup table for aemif subnodes.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19 12:42:25 +01:00
Alexandre Bailon
d1df1e01af ARM: davinci: da8xx: Fix sleeping function called from invalid context
Everytime the usb20 phy is enabled, there is a
"sleeping function called from invalid context" BUG.
In addition, there is a recursive locking happening
because of the recurse call to clk_enable().

clk_enable() from arch/arm/mach-davinci/clock.c uses
spin_lock_irqsave() before to invoke the callback
usb20_phy_clk_enable(). usb20_phy_clk_enable() uses
clk_get() and clk_enable_prepapre() which may sleep.

Replace clk_prepare_enable() by davinci_clk_enable().

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Suggested-by: David Lechner <david@lechnology.com>
[nsekhar@ti.com: minor commit description adjustment]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-02 16:15:07 +05:30
Alexandre Bailon
48cd30b495 ARM: davinci: Make __clk_{enable,disable} functions public
In some cases, there is a need to enable a clock as part of
clock enable callback of a different clock. For example, USB
2.0 PHY clock enable requires USB 2.0 clock to be enabled.
In this case, it is safe to instead call __clk_enable()
since the clock framework lock is already taken. Calling
clk_enable() causes recursive locking error.

A similar case arises in the clock disable path.

To enable such usage, make __clk_{enable,disable} functions
publicly available outside of clock.c. Also, call them
davinci_clk_{enable|disable} now to be consistent with how
other davinci-specific clock functions are named.

Note that these functions are not exported to drivers. They
are meant for usage in platform specific clock management
code.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Suggested-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-02 16:10:42 +05:30
Bartosz Golaszewski
b40881738f ARM: davinci: da850: fix da850_set_pll0rate()
This function is confusing - its second argument is an index to the
freq table, not the requested clock rate in Hz, but it's used as the
set_rate callback for the pll0 clock. It leads to an oops when the
caller doesn't know the internals and passes the rate in Hz as
argument instead of the cpufreq index since this argument isn't bounds
checked either.

Fix it by iterating over the array of supported frequencies and
selecting a one that matches or returning -EINVAL for unsupported
rates.

Also: update the davinci cpufreq driver. It's the only user of this
clock and currently it passes the cpufreq table index to
clk_set_rate(), which is confusing. Make it pass the requested clock
rate in Hz.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[nsekhar@ti.com: commit headline update]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-02 15:02:51 +05:30
Bartosz Golaszewski
0a5011673a ARM: davinci: da850: coding style fix
Fix alignment of the clock lookup table entries.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[nsekhar@ti.com: commit headline update]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-02 15:01:56 +05:30
Bartosz Golaszewski
ef37427ac5 ARM: davinci: da850: don't add emac clock to lookup table twice
Similarly to the aemif clock - this screws up the linked list of clock
children. Create a separate clock for mdio inheriting the rate from
emac_clk.

Cc: <stable@vger.kernel.org> # 3.12.x-
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[nsekhar@ti.com: add a comment over mdio_clk to explaing its existence +
		 commit headline updates]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-02 14:37:18 +05:30
Bartosz Golaszewski
5d45b011c1 ARM: davinci: da850: fix infinite loop in clk_set_rate()
The aemif clock is added twice to the lookup table in da850.c. This
breaks the children list of pll0_sysclk3 as we're using the same list
links in struct clk. When calling clk_set_rate(), we get stuck in
propagate_rate().

Create a separate clock for nand, inheriting the rate of the aemif
clock and retrieve it in the davinci_nand module.

Cc: <stable@vger.kernel.org> # 4.9.x
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-02 14:37:18 +05:30
Thomas Gleixner
a5a1d1c291 clocksource: Use a plain u64 instead of cycle_t
There is no point in having an extra type for extra confusion. u64 is
unambiguous.

Conversion was done with the following coccinelle script:

@rem@
@@
-typedef u64 cycle_t;

@fix@
typedef cycle_t;
@@
-cycle_t
+u64

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
2016-12-25 11:04:12 +01:00
Linus Torvalds
e79ab194d1 ARM: SoC platform updates for v4.10
These are updates for platform specific code on 32-bit ARM machines,
 essentially anything that can not (yet) be expressed using DT files.
 
 Noteworthy changes include:
 
 - Added support for the TI DRA71x family of SoCs in mach-omap2,
   this is an new variant of the the DRA72x/DRA74x automotive
   infotainment chips we already supported for a while.
 
 - Added support for the ST STM32F746 SoC, the first Cortex-M7
   based microcontroller we support, related to the smaller
   STM32F4 family.
 
 - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile,
   see http://elinux.org/RZ-G
 
 - SMP is now supported on the OX820 platform
 
 - A lot of code in mach-omap2 gets removed as a follow-up to
   removing support for board files in the previous release
 
 - Davinci has some new work to improve USB support
 
 - For i.MX, the performance monitor now supports profiling the
   memory controller using 'perf'
 
 Conflicts:
 arch/arm/mach-shmobile/setup-rcar-gen2.c: rcar_gen2_clocks_init()
 is gone, calling of_clk_init(NULL) is sufficient now.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWFMS9WCrR//JCVInAQIG+Q/7BElvubqO/Cc/VEAyoB5iF9OB9wPD2t5p
 O0KwtrTtzqJZJNGTmPiesR4DMZH07O1XoW8HqvBPeXtB7/t0tmOegwK+WABbpkSE
 ZQgUjtrIGwteJXYqU2BbhooO8G6mEsfWaqdGX8ZiIk40fPhMN6536lG+JA8DV7uv
 ckAPHCZkIf34lDtwljN97Cvj1TT9lBFp04bx7alKqfg1IMV+iMSxvSRHuuFlxRCk
 kzwVXDmFlZLmueU2KbQXTuOUrvehIGlZ/X5QWlxfrjwCwnOvr54p8WDoVWu2UkHm
 Dc8BVfsBny8mCZJRzfDD1S0PD0mWn1msdOhRb4VRzsC9DnRI4qbL0/Hstu8A7yUQ
 kBtMyVtFTzvRSclABbHHN6Mnm37AyNwSIKIB8h2U1m7YHqZGwHLaflVT5sf3tl7m
 4arTVqHtR8oSU5G5a2FTznMM2rfIx4LcCBbLQxWqzmO4Qrh4j6t7c2i7+VTfFAja
 0bToLgTArKK/cep6PWeBnMH14nzlXoKtBf2T8qwQPuAmLKy9E0ZduLKZ01B/nqrj
 OXcsnG0OUuqU4RgbIaDssRU4ohKIk8JcAl60TdRFhzj+/LTbeMaWVwbWuQS+iHd3
 zfzGUoUIhElx0vHt6ghR0BYQadszb1z9V0NEs3UM0v5cWlNodX//3okH8lZmSW6w
 +fO4dSnIKIA=
 =BF6Y
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "These are updates for platform specific code on 32-bit ARM machines,
  essentially anything that can not (yet) be expressed using DT files.

  Noteworthy changes include:

   - Added support for the TI DRA71x family of SoCs in mach-omap2, this
     is an new variant of the the DRA72x/DRA74x automotive infotainment
     chips we already supported for a while.

   - Added support for the ST STM32F746 SoC, the first Cortex-M7 based
     microcontroller we support, related to the smaller STM32F4 family.

   - Renesas adds support for r8a7743 and r8a7745 in mach-shmobile, see
     http://elinux.org/RZ-G

   - SMP is now supported on the OX820 platform

   - A lot of code in mach-omap2 gets removed as a follow-up to removing
     support for board files in the previous release

   - Davinci has some new work to improve USB support

   - For i.MX, the performance monitor now supports profiling the memory
     controller using 'perf'"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (95 commits)
  ARM: davinci: da830-evm: use gpio descriptor for mmc pins
  ARM: davinci: da850-evm: use gpio descriptor for mmc pins
  ARM: davinci: hawk: use gpio descriptor for mmc pins
  ARM: ARTPEC-6: add select MFD_SYSCON to MACH_ARTPEC6
  ARM: davinci: da8xx: Fix ohci device name
  ARM: oxnas: Add OX820 config and makefile entry
  ARM: oxnas: Add OX820 SMP support
  ARM: davinci: PM: fix build when da850 not compiled in
  ARM: orion5x: remove legacy support of ls-chl
  ARM: integrator: drop EBI access use syscon
  ARM: BCM5301X: Add back handler ignoring external imprecise aborts
  ARM: davinci: PM: support da8xx DT platforms
  ARM: davinci: PM: cleanup: remove references to pdata
  ARM: davinci: PM: rework init, remove platform device
  ARM: Kconfig: Introduce MACH_STM32F746 flag
  ARM: mach-stm32: Add a new SOC - STM32F746
  ARM: shmobile: document SK-RZG1E board
  ARM: shmobile: r8a7745: basic SoC support
  ARM: imx: mach-imx6ul: add imx6ull support
  ARM: zynq: Reserve correct amount of non-DMA RAM
  ...
2016-12-15 15:39:02 -08:00
Arnd Bergmann
196249beab mach-davinci SoC support updates to adjust
USB ohci device name to that used by drivers
 and update of various board files to use gpio
 descriptor API used by MMC subsystem for card
 detect and write-protect detection.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYPAmpAAoJEGFBu2jqvgRNarAP/A2a+7nKXhUaxQaB7fIpeX0B
 dXzFCm2s/Hvz6ox3yl30EZRcX10PAZCFFauSsrIV4dcvr+i5ecWYwHFuv185NHZf
 b7WbvenYX6fqhzEpqcg9YxWtPK/ziuNhI0jUPcaNug7Pe47o8vnh0w4ZPHWEmjz6
 KHxzjtLveqiKejDDrkVjjZV6wTmYfsIuxKyB/T6U1KfjZEoSc1aSBnZHtnIjanmm
 ZNRVuwmrM6U4aGEB+rZvYa5hNV+fZEpte0qFUFhPsWW7aw6mP+40yKvFXLcDv7ty
 jBzZSMIXMUwUAjuProWFThH7txZgkaWhPrud6bIQAKTT/9Wb/A6JTRBQXwhUfBGv
 uY6GRNNe7YK73kZlgzB4ivhYqjq2lH2nbunpMqyBkrs6xHN33TXn/J8CixYrrp22
 RjmYfznUugICmTqSe9+pXufP0PJe8oSx5WI4jxHry4Hn1X+V+07QL4TTzWKkGrPk
 A8CRrSzHO5bQh3XJEU4BZ9z1Bo9wRJV02cOk4LrL2nz4kgCkks5qX0H1bJZtNgv2
 93ITHOhJ6AeTM+Lj3hW89k96jSpu0JPTFpqaHb2qpw6lbuqhlagPYkbTv3yydORe
 3HAMqHEYcs0vYGhYUv7bWrShWdIe+nKC9ror21t9V1iBWGC7uA15ySt3Adqqx6km
 FUZzZdNGThckHvWUvTEf
 =P8ea
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v4.10/soc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc

Pull "DaVinci SoC updates for v4.10 (part 3)" from Sekhar Nori:

mach-davinci SoC support updates to adjust
USB ohci device name to that used by drivers
and update of various board files to use gpio
descriptor API used by MMC subsystem for card
detect and write-protect detection.

* tag 'davinci-for-v4.10/soc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da830-evm: use gpio descriptor for mmc pins
  ARM: davinci: da850-evm: use gpio descriptor for mmc pins
  ARM: davinci: hawk: use gpio descriptor for mmc pins
  ARM: davinci: da8xx: Fix ohci device name
2016-11-30 14:48:30 +01:00
Arnd Bergmann
c0db16b815 Adds suspend-to-RAM support for DT boot mode
on DA850.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYMaLaAAoJEGFBu2jqvgRNvYcP/2sF9L5JykVfGrDlNpI+N52l
 ue5Mx3Eq10nMcpYPAmCV5t6V5WKugwoGmPughVuHeCT+xagJZI3yjQk+EtF+tU21
 /A25RDE3vu2OW4ogGaU/+GmQGva9BMS8HGoJ9N1e/gfwhvttA3dRypAawH1ofgUg
 2npXdng0eaH8/J1QCXQLlbDUN0f9LQBh2drUR+opNLO6gKIO0DKtWaP54CAhKC3Z
 c8KY5FUmZAnjXJK0SL4Wt3zYpHzFmfVVWtsiz3WWVYyB3N9F2sahP6ti6HtT/A/2
 sCYJm6JOmf18ssItT3dd7N1v6enyvpt6qrS7YnvIGp/MbMdKFof6dK4qD3QTDZsp
 OvyoqeS+oX80NAIETmj1kLzjJ75nsw78sDYcxV8xAyz8/kWolRpbj8CDO6CoQv81
 CxR73sXwDbdRtxnknYHNuDg1bTd2kZN/CqUjUL4Vh4LwblW4kxHeCP6RdohZLDjO
 l+oXpTiK1wWPRldE9K5Fn3IxipX67UrXvGtlerdwVRptQVW87Dc0qGRWM7OmuIwX
 Kuu4ABiznTMYD6t9p8mm2bY1OJonvUlSs6LLX2hXIPY0CAQsUdcp8ldyRuU3fS/J
 X3/PHLOI0c5k84KSq77Z75rP3BY+oYe8y/zqqDRAL4biJgBQWPowDF3TykWuXczU
 7aSAL4nBAF//Il2NPuDV
 =Vovb
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v4.10/soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc

Pull "DaVinci SoC updates for v4.10 (part 2)" from Sekhar Nori:

Adds suspend-to-RAM support for DT boot mode
on DA850.

* tag 'davinci-for-v4.10/soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: PM: support da8xx DT platforms
2016-11-30 14:47:37 +01:00
Arnd Bergmann
e264ae280c mach-davinci cleanup to make it easy to add PM support
for DT-boot.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYMaKoAAoJEGFBu2jqvgRNFiEP/2ZxK0X5eP4omPlSNGJBuHl9
 EbigYMTDrnpqTqP5I7m4yQUgIB59hv2jQtUtOG20Hpaz+JtBfH/IGhbJ0DI+o9Il
 beMUmL9svNW68tXL1+qO6L+UZwY1zAjWtG1aGJ8dXZF45B3KN7CQpCQBQY4paEx+
 yvaDElep+lg280mBQ1hvHV02/+JBYA5XVPnOy7kc7FF7uiJYkkXhz9bCufBL0DZ0
 2/z4O2C3Olqyevz2n3YX8bzHMmlMenMKuwv6IglseXWWuKWzvV9dwvMAMVnb29pN
 P6m89iPCgQ/Q2XPV2SkooiApelwzlNQi31LIupBQdKXvjXnUVP/Vw2uU04xG+j4I
 GA3bGYA9yWnzAQMwEqSMcXfzaWyf7lGR2ZKQoVDXwtLj3kNA0ZmxQsxkZKbfnSC+
 9YUp90X477NCksccyXF4b6VGMPBUsi5BBCiATmHKjoOw9wLAHmhluQmzfer31yTg
 Ttj9vPeQB4CjJT+TVK+2Y6Y2quu/eUVDBehUCf/Ap2ctxUsSSD2dJUU873brXcWe
 iXOncbzWhU5pAWI5bQkuaAG5iV0Z+oHBgeOwp+EkyHA6WDnLd3oaDRQJV3SeWWsP
 fhonVqYpQQURgzLYmTM8hGzRYp6IeqcSb76ms7TkEBVYSSkgpouoCQB3Eu1ZYDV6
 cIBnqNPLHWV42EA9E8sc
 =cbuL
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v4.10/cleanup-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc

Pull DaVinci cleanup for v4.10 from Sekhar Nori:

mach-davinci cleanup to make it easy to add PM support
for DT-boot.

* tag 'davinci-for-v4.10/cleanup-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: PM: fix build when da850 not compiled in
  ARM: davinci: PM: cleanup: remove references to pdata
  ARM: davinci: PM: rework init, remove platform device
2016-11-30 14:45:31 +01:00
Axel Haslam
b5e1438cf9 ARM: davinci: da830-evm: use gpio descriptor for mmc pins
Currently the mmc driver is polling the gpio to know if the
card was removed.

By using a gpio descriptor instead of the platform callbacks,
the driver will be able to register the gpio using the mmc core
APIs designed for this purpose.

This has the advantage that an irq will be registered, and
polling is no longer needed. Also, a dependency on platform
callbacks is removed for this board.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
[nsekhar@ti.com: minor commit message edit]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-28 14:01:17 +05:30
Axel Haslam
bdf0e8364f ARM: davinci: da850-evm: use gpio descriptor for mmc pins
Currently the mmc driver is polling the gpio to know if the
card was removed.

By using a gpio descriptor instead of the platform callbacks,
the driver will be able to register the gpio using the mmc core
APIs designed for this purpose.

This has the advantage that an irq will be registered, and
polling is no longer needed. Also, a dependency on platform
callbacks is removed for this board.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
[nsekhar@ti.com: minor commit message edit]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-28 14:01:16 +05:30
Axel Haslam
c69f43fb4f ARM: davinci: hawk: use gpio descriptor for mmc pins
Currently the mmc driver is polling the gpio to know if the
card was removed.

By using a gpio descriptor instead of the platform callbacks,
the driver will be able to register the gpio using the mmc core
APIs designed for this purpose.

This has the advantage that an irq will be registered, and
polling is no longer needed. Also, a dependency on platform
callbacks is removed for this board.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-28 14:00:55 +05:30
Axel Haslam
8439a1d77d ARM: davinci: da8xx: Fix ohci device name
While the clk lookup table is making reference to "ohci"
other subsystems (such as phy) are trying to match "ohci.0"

Since there is a single ohci instance, instead of changing
the clk name, change the dev id to -1, and add the "-da8xx"
postfix to match the driver name that will also be changed
in a subsequent patch.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-23 17:34:06 +05:30
Kevin Hilman
f7715b2999 ARM: davinci: PM: fix build when da850 not compiled in
Currently, suspend/resume support is only available on da850 platforms,
and the platform PM code has dependencies on da850 functions.  However,
CONFIG_SUSPEND might be enabled even when da850 support is not, causing
build failure:

arch/arm/mach-davinci/built-in.o: In function `davinci_pm_init':
pm_domain.c:(.init.text+0x1fb8): undefined reference to `da8xx_get_mem_ctlr'
pm_domain.c:(.init.text+0x20b0): undefined reference to `da8xx_syscfg1_base'

Fix this by only building the PM core when da850 is enabled.

Reported-by: Sekhar Nori <nsekhar@ti.com>
Fixes: aa9aa1ec2d ("ARM: davinci: PM: rework init, remove platform device")
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-20 16:52:00 +05:30
Kevin Hilman
7e431af8fa ARM: davinci: PM: support da8xx DT platforms
Add PM support for DA850 device-tree boot.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-16 14:45:07 +05:30
Kevin Hilman
1428ed1ad3 ARM: davinci: PM: cleanup: remove references to pdata
Since the PM core code is no longer using a fake platform_device or
platform_data, remove references to 'pdata'.

No functional changes.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-16 14:41:59 +05:30
Kevin Hilman
aa9aa1ec2d ARM: davinci: PM: rework init, remove platform device
Remove fake platform device used for PM init.  Move pdata values which
are common across all current platforms into pm.c.

Also, since PM is only used on da8xx, remove davinci_pm_init() from
common init code, and only use in da850/omapl138 board files that are
currently creating the fake platform_device.

Suggested-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
[nsekhar@ti.com: subject line adjustment]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-16 14:41:29 +05:30
David Lechner
36173c2d02 ARM: davinci: da850: Fix pwm name matching
This fixes pwm name matching for DA850 familiy devices. When using device
tree, the da850_auxdata_lookup[] table caused pwm devices to have the exact
same name, which caused errors when trying to register the devices.

We cannot have multiple entries for the same clock in in da850_clks[], so
we have added child clocks to the EHRPWM and ECAP LPSC clocks so that each
PWM device will have its own clock for proper name matching.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-01 15:30:03 +05:30
Axel Haslam
ced95ac081 ARM: davinci: da8xx: register USB PHY clocks in the DT file
The usb20_phy clock needs to be registered for the driver to be able
to get and enable a clock. Currently the usb phy clocks are registered
from board files, which will not be called during a device tree based
boot.

To be able to probe correctly usb form a device tree boot, register
the usb phy clocks from the DT specific init.

Unfortunately, davinci does not have proper clock support on device tree
yet, so by registering the clock from the DT specific file we are
forced to hardcode the parent clock, and cannot select refclkin as
parent for any of the phy clocks of the da850 family.

As none of the current da850 based boards currently in mainline use
refclkin as source. I guess we can live with this limitation until clocks
are correctly represented through CCF/device tree.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
[Added error checking]
Signed-off-by: David Lechner <david@lechnology.com>
[nsekhar@ti.com: typo fixes in commit message]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-01 15:24:24 +05:30
David Lechner
0004b02a68 ARM: davinci: da8xx: add usb phy clocks
Up to this point, the USB phy clock configuration was handled manually in
the board files and in the usb drivers. This adds proper clocks so that
the usb drivers can use clk_get and clk_enable and not have to worry about
the details. Also, the related code is removed from the board files and
replaced with the new clock registration functions.

This also removes the #if IS_ENABLED(CONFIG_USB_MUSB_HDRC) around the musb
declaration and renames the musb platform device so that we can reference
it from the usb20 clock even if the musb device is not used.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-01 15:24:14 +05:30
David Lechner
3b996e5f8f ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for USB phy
Add OF_DEV_AUXDATA() entry for USB phy. This is required for
so that clock lookup will work for the USB PHY driver.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-11-01 15:20:34 +05:30
David Lechner
b08157a1b6 ARM: davinci: da8xx: Add USB device names to clock lookup tables
This adds device names for the SoC USB devices to the clock lookup tables
in da830.c and da850.c.

Also add the USB device names to the da850_auxdata_lookup[] table.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-10-31 17:25:03 +05:30
David Lechner
9b50475092 ARM: davinci: da8xx: Add USB PHY platform device
There is now a proper phy driver for the DA8xx SoC USB PHY. This adds the
platform device declarations needed to use it.

Signed-off-by: David Lechner <david@lechnology.com>
[nsekhar@ti.com: keep usb-davinci.h included in board-da830-evm.c
		 minor subject line adjustment]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-10-31 17:20:27 +05:30
Karl Beldan
ec7cc27ed1 ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for lcdc
This is required for tilcdc to be able to acquire a functional clock
on da850 SoCs.

Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
[Bartosz:
  - added the commit description
  - changed the compatible string to 'ti,da850-tilcdc']
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-10-31 16:58:21 +05:30
Axel Haslam
40a17abc8b ARM: davinci: da8xx: Add full regulator constraints for non-DT boot
The phy framework requests an optional "phy" regulator. If it does
not find one, it returns -EPROBE_DEFER. In the case of non-DT boot
for the omap138-lcdk board, this would prevent the usb11 phy to probe
correctly and ohci would not enumerate.

By calling regulator_has_full_constraints(), An error would be returned
instead of -EPROBE_DEFER for the regulator, and the probe of the phy driver
can continue normally without a regulator.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
[nsekhar@ti.com: minor commit message updates]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-10-31 16:58:21 +05:30
David Lechner
0fcd54112a ARM: davinci: da8xx: Add CFGCHIP syscon platform device
The CFGCHIP registers are used by a number of devices, so use a syscon
device to share them. The first consumer of this will be the phy-da8xx-usb
driver.

Add the syscon device and register it.

Signed-off-by: David Lechner <david@lechnology.com>
[nsekhar@ti.com: minor commit message fixes]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-10-31 16:58:21 +05:30
Alexandre Bailon
766763dbdc ARM: davinci: da8xx: Remove duplicated defines
Some macro for DA8xx CFGCHIP are defined in usb-davinci.h,
but da8xx-cfgchip.h intend to replace them.
Remove duplicated defines between da8xx-cfgchip.h and usb-davinci.h

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-10-31 16:51:56 +05:30
Peter Ujfalusi
fc89017c83 ARM: davinci: dm365: Remove DMA resources for SPI
The driver is converted to not use the DMA resource.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-10-26 13:42:53 +05:30
Peter Ujfalusi
0dc68bc084 ARM: davinci: dm355: Remove DMA resources for SPI
The driver is converted to not use the DMA resource.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-10-26 13:42:53 +05:30
Peter Ujfalusi
638671053c ARM: davinci: devices: Remove DMA resources for MMC
The driver is converted to not use the DMA resource.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-10-26 13:42:53 +05:30
Peter Ujfalusi
7dcdfef19a ARM: davinci: devices-da8xx: Remove DMA resources for MMC and SPI
The drivers are now converted to not use the DMA resource.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-10-26 13:42:53 +05:30
Linus Torvalds
00e729c933 ARM: DT updates for v4.9
These are as usual a very large number of mostly boring updates to
 enable devices in existing machines, or to fix minor bugs.  Notably,
 an ongoing treewide effort to fix warnings caused by an update to the
 device tree compiler. These are enabled with "make W=1" at the moment
 but can hopefully become the default once all issues have been addressed.
 
 No new SoC platform is added this time around (Armada 395 and Orion
 mv88f5181 are slight variations of existing ones), but a significant
 number of new dts files are added, which I list by platform:
 
 - Allwinner: Empire Electronix M712 and iNet d978 Rev2 tablets;
 	Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E,
 	Orange Pi Lite, Olimex A33-Olinuxino, and Nano Pi Neo
 	single-board computers
 
 - ARM Realview: all supported machines (ported from board files)
 
 - Broadcom: BCM958525er, BCM958522er, BCM988312hr, BCM958623hr and
 	BCM958622hr reference boards for Northstar platform;
 	Raspberry Pi Zero single-board computer
 
 - Marvell EBU: Netgear WNR854T router (ported from board file);
 	Armada 395 SoC platform and GP board
 	Armada 390 DB development board
 
 - NXP i.MX: imx7s Warp7 reference board;
 	Gateworks Ventana GW553x single-board computer,
 	Technologic Systems TS-4900 and
 	Engicam IMX6UL GEA M6UL computer-on-module,
 	Inverse Path USB armory board
 
 - Qualcomm: LG Nexus 5 Phone
 
 - Renesas: r8a7792/wheat and r7s72100/rskrza1 development boards
 
 - Rockchip: Rockchip RK3288 Fennec reference board;
 	Firefly RK3288 Reload platform
 
 - ST Microelectronics STi: B2260 (96boards) single-board computer
 
 - TI Davinci: OMAP-L138 LCDK Development kit
 
 - TI OMAP: beagleboard-x15 rev B1 single-board computer
 
 Conflicts: vendor-prefixes.txt has conflicting additions, keep all of
 them in alphabetical order.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/g11mCrR//JCVInAQIWbw/9FOrBghI2bFqZkDwFE8E3QCpc9bIiETMx
 FMdHV6FAo0D6Yp4EqlWjFI0u0Kn9l4FKz0SYWAigpfT6gfeI1THC2Kl31mslvb5U
 v3QreXI4rKjZS/B1lYECee0os+fNvJcWKj3uFjb4VT1k7T6+MytjHGAQSzwxM66Q
 0Lp5HjdFGDrOXoIUx2eEZkZlVXyQ2EFocMoAsj+s/MHnA8fn1tWW08633kjTsC6y
 9Xj71joghlDKZjA56htaEQ+/6dYdxAHVlvkN7aL9di+2Sc2/ma6my70Zvs4zwtOv
 uJDhcJhjwvf3QtDuOoGhTnFtQYQWaONaGUFyEwYyy2kIwiJy0afep4JCq2o+/CZM
 VMvGXepJpVujE9mg+LwHPgaMYgBhswsJzwQ2ZESrMQcUZ624E18dG2/ei5zat4UN
 5/NvzxEoDGmfQFQUpuoZuPqhwLRauXr7I+u4aliIdtSBGeaA2T1yFT4pVgNUOxBQ
 0bMtE2QSUKyaF+xAHLTsV7yheDU0S+C7zVkLPwePK0V7vUFuBsdQiXEqXh/6MSq0
 iYVPmKwNTIHK3qMiGtm8XDugjR8Pf0tCXRqIWJMlXs75rCAsKfFW4j4XYnlO4wMy
 dP2fdoe0xA+zthR0hRHD5i8WCmISeUgtPAdFyTid1jZkMk1AzM0AqBUdAqTInvQ3
 O4JSYcjBWoo=
 =/gg/
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Arnd Bergmann:
 "These are as usual a very large number of mostly boring updates to
  enable devices in existing machines, or to fix minor bugs. Notably, an
  ongoing treewide effort to fix warnings caused by an update to the
  device tree compiler. These are enabled with "make W=1" at the moment
  but can hopefully become the default once all issues have been
  addressed.

  No new SoC platform is added this time around (Armada 395 and Orion
  mv88f5181 are slight variations of existing ones), but a significant
  number of new dts files are added, which I list by platform:

   - Allwinner: Empire Electronix M712 and iNet d978 Rev2 tablets,
     Orange Pi PC Plus, Orange Pi 2, Orange Pi Plus 2E, Orange Pi Lite,
     Olimex A33-Olinuxino, and Nano Pi Neo single-board computers

   - ARM Realview: all supported machines (ported from board files)

   - Broadcom: BCM958525er, BCM958522er, BCM988312hr, BCM958623hr and
     BCM958622hr reference boards for Northstar platform, Raspberry Pi
     Zero single-board computer

   - Marvell EBU: Netgear WNR854T router (ported from board file),
     Armada 395 SoC platform and GP board Armada 390 DB development
     board

   - NXP i.MX: imx7s Warp7 reference board, Gateworks Ventana GW553x
     single-board computer, Technologic Systems TS-4900 and Engicam
     IMX6UL GEA M6UL computer-on-module, Inverse Path USB armory board

   - Qualcomm: LG Nexus 5 Phone

   - Renesas: r8a7792/wheat and r7s72100/rskrza1 development boards

   - Rockchip: Rockchip RK3288 Fennec reference board, Firefly RK3288
     Reload platform

   - ST Microelectronics STi: B2260 (96boards) single-board computer

   - TI Davinci: OMAP-L138 LCDK Development kit

   - TI OMAP: beagleboard-x15 rev B1 single-board computer"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (390 commits)
  ARM: dts: sony-nsz-gs7: add missing unit name to /memory node
  ARM: dts: chromecast: add missing unit name to /memory node
  ARM: dts: berlin2q-marvell-dmp: add missing unit name to /memory node
  ARM: dts: berlin2: Add missing unit name to /soc node
  ARM: dts: berlin2cd: Add missing unit name to /soc node
  ARM: dts: berlin2q: Add missing unit name to /soc node
  ARM: dts: berlin2: Remove skeleton.dtsi inclusion
  ARM: dts: berlin2cd: Remove skeleton.dtsi inclusion
  ARM: dts: berlin2q: Remove skeleton.dtsi inclusion
  arm: dts: berlin2q: enable all wdt nodes unconditionally
  arm: dts: berlin2: enable all wdt nodes unconditionally
  ARM: dts: omap5-igep0050.dts: Use tabs for indentation
  ARM: dts: Fix igepv5 power button GPIO direction
  ARM: dts: am335x-evmsk: Add blue-and-red-wiring -property to lcdc node
  ARM: dts: am335x-evmsk: Whitespace cleanup of lcdc related nodes
  ARM: dts: am335x-evm: Add blue-and-red-wiring -property to lcdc node
  ARM: dts: s3c64xx: Use macros for pinctrl configuration
  ARM: dts: s3c2416: Use macros for pinctrl configuration
  ARM: dts: s5pv210: Use macros for pinctrl configuration
  ARM: dts: s3c64xx: Use common macros for pinctrl configuration
  ...
2016-10-07 21:29:04 -07:00
Karl Beldan
8f899b4ed6 ARM: davinci: da850: Add ti-aemif lookup for clock matching
The davinci boards don't have their clocks in DT yet and getting a clock
will fail, unless registering them as clk_lookups. This registers the
aemif clock for the ti-aemif memory driver.

The current aemif lookup entry resolving to the same clock:
    'CLK(NULL,               "aemif",        &aemif_clk)'
is currently used by davinci_nand and remains for non-DT and backward
compatibility.

Currently the davinci boards only configure the AEMIF in case of non-DT
boot, via some code in mach-davinci.
This change will allow DT-based davinci platforms to do the same, via
the ti-aemif memory driver code.

Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
[nsekhar@ti.com: reworded commit message]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-08-23 20:20:33 +05:30
Karl Beldan
44524a010a ARM: dts: da850: Add basic DTS for the LCDK
The LCDK is the successor to the late Hawkboard.
Among the differences are the flash (16bits vs 8bits) and some pins
(MMC, LEDs, buttons, some external connectors), however the main
components remain the same (eth. phy, audio codec, video decoder and
DAC) except for the main PMIC, different and hard-wired on the LCDK (the
LDOs and DCDCs are always on).
A DT-only boot with this addition gives functional UART, reboot via
watchdog, RTC, ethernet and MMC (I added the CD GPIO for the MMC
although davinci_mmc doesn't call the OF facilities of mmc core).

Cc: Sekhar Nori <nsekhar@ti.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-08-09 15:52:35 +05:30
Linus Torvalds
fbae5cbb43 ARM: SoC platform updates for v4.8
Improved and new platform support for various SoCs:
 
  - New SoC support:
    - Broadcom BCM23550
    - Freescale i.MX7Solo
    - Qualcomm MDM9615
    - Renesas r8a7792
  - Conversion of clps711x to multiplatform
  - debug uart improvements for Atmel platforms
  - Tango platform improvements: HOTPLUG_CPU, Suspend-to-ram
  - OMAP tweaks and improvements to hwmod
  - OMAP support for kexec on SMP
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXnaibAAoJEIwa5zzehBx3h6AP/0TBATiDuYXTcX3V8zZ/ia9y
 7dWbP7gVX7DN39b5qdjLTa+DUx3Y3msxW9qsuUQR8RWijbqjCH7b/fyPwGA0fmpP
 3uZpFpyzs+6/3TiMDN1yw1T+/2YbVyM+4rOeNsCwncdXjGSx0FaMJAqLBrppiWLH
 1S9HhD/314znibl8skOy8QIDWwlW011sS2mNUIN+JelvnS/VDjtCDfpphpNrAQF9
 MZB6LhT9itvf6mIEGIsaDq/Ii7fgIAnA9WCtwv9tJkAZHzbS0cWkiJzb7hF1GzFO
 Q5HBAyzn+CkeTQ3+9NQU0G0vhfa3Ea0g1gfw6qRmAw+z8Qdiamjh8SSve6zm1fE8
 GmIewsMAWWIUYykEIi9hbWCTYq06Pw/Nn6KWRAuQ/lpt++jzMQ82qk6cxELLW15e
 uAC1JjFOCIFNBZhkrdQDU0qx6Ew/AUH4wCYqu4Xh7pW0MHu0V9NgsmooeoTmCkpd
 WtgKp8Wh5dsK3SdsbTjdR/IeHSQkeSdgNY/6TBTjpRwCIlEMwHlKbvwvRExk1xzi
 nLQJsR49MsjeSdPflzO6WUzOjJhQfuw2jCtAQjlom15EgkEZ569MT4RsAQIgvNCI
 PeUWkvIW1uCtW7Y6ADPRBKMIrajPs8YW4E/xTItuhrqLHp8z6efvRmVNdpzqBTVj
 tT2t2bRXF0cGiUvOeU7U
 =Kh9P
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "Improved and new platform support for various SoCs:

  New SoC support:
   - Broadcom BCM23550
   - Freescale i.MX7Solo
   - Qualcomm MDM9615
   - Renesas r8a7792

  Improvements:
   - convert clps711x to multiplatform
   - debug uart improvements for Atmel platforms
   - Tango platform improvements: HOTPLUG_CPU, Suspend-to-ram
   - OMAP tweaks and improvements to hwmod
   - OMAP support for kexec on SMP"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits)
  ARM: davinci: fix build break because of undeclared dm365_evm_snd_data
  ARM: s3c64xx: smartq: Avoid sparse warnings
  ARM: sti: Implement dummy L2 cache's write_sec
  ARM: STi: Update machine _namestr to be more generic.
  arm: meson: explicitly select clk drivers
  ARM: tango: add Suspend-to-RAM support
  ARM: hisi: consolidate the hisilicon machine entries
  ARM: tango: fix CONFIG_HOTPLUG_CPU=n build
  MAINTAINERS: Update BCM281XX/BCM11XXX/BCM216XX entry
  MAINTAINERS: Update BCM63XX entry
  MAINTAINERS: Add NS2 entry
  MAINTAINERS: Fix nsp false-positives
  MAINTAINERS: Change L to M for Broadcom ARM/ARM64 SoC entries
  ARM: debug: Enable DEBUG_BCM_5301X for Northstar Plus SoCs
  ARM: clps711x: Switch to MULTIPLATFORM
  ARM: clps711x: Remove boards support
  ARM: clps711x: Add basic DT support
  ARM: clps711x: Reduce static map size
  ARM: SAMSUNG: Constify iomem address passed to s5p_init_cpu
  ARM: oxnas: Change OX810SE default driver config
  ...
2016-08-01 18:27:08 -04:00
Sekhar Nori
933b11aeed ARM: davinci: fix build break because of undeclared dm365_evm_snd_data
commit 6bce5efd44 ("ARM: davinci: remove unused davinci-i2s pdata")
removed all instances of davinci-i2s pdata. However, on DM365 EVM,
the same platform data is passed to the voicecodec present on that
device.

This causes build breakage when voicecodec support is enabled:

arch/arm/mach-davinci/board-dm365-evm.c:764:17: error: 'dm365_evm_snd_data' undeclared (first use in this function)

voicecodec driver does not use the platform data as well, and
it is safe to remove it.

Fixes: 6bce5efd44 ("ARM: davinci: remove unused davinci-i2s pdata")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-07-14 14:44:43 +02:00
Stephan Linz
e580822775 arm: use the new LED disk activity trigger
- dts: rename 'ide-disk' to 'disk-activity'
- platform: rename 'ide-disk' to 'disk-activity'
- defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK'

Signed-off-by: Stephan Linz <linz@li-pro.net>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-06-27 08:58:40 +02:00
Petr Kulhavy
6bce5efd44 ARM: davinci: remove unused davinci-i2s pdata
The davinci-i2s driver ("davinci-mcbsp") does not use platform
data any longer. Remove the dummy pdata provided by the board
drivers dm355, dm365, dm644x and neuros-osd2.

Signed-off-by: Petr Kulhavy <petr@barix.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-06-24 15:28:30 +05:30
Petr Kulhavy
ca5c098f75 ARM: davinci: da850: add clocks for mcbsp0 and 1
Add clock definitions "davinci-mcbsp.0" and "davinci-mcbsp.1" in order
to make McBSP driver work on the DA850 platform.

The McBSP 0 and 1 interfaces were not defined for the DA850 platform.
Neither were the related clocks. In order to make the use of McBSP via
devicetree the clocks need to be defined.

Signed-off-by: Petr Kulhavy <petr@barix.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-06-10 18:22:41 +05:30
Linus Torvalds
f7df9be067 ARM: DT updates for v4.7
These are all the updates to device tree files for 32-bit platforms,
 which as usual makes up the bulk of the ARM SoC changes: 462 non-merge
 changesets, 450 files changed, 23340 insertions, 5216 deletions.
 
 The three platforms that are added with the "soc" branch are here as well,
 and we add some related machine files:
 
 - For Aspeed AST2400/AST2500, we get the evaluation platform and
   the Tyan Palmetto POWER8 mainboard that uses the AST2400 BMC
 - For Oxnas 810SE, the Western Digital "My Book World Edition"
   is added as the only platform at the moment.
 - For ARM MPS2, the AN385 (Cortex-M3) and AN399 (Cortex-M7)
   are supported
 
 On the ARM Realview development platform, we now support all machines
 with device tree, previously only the board files were supported, which
 in turn will likely be removed soon.
 
 Qualcomm IPQ4019 is the second generation ARM based "Internet Processor",
 following the IPQ806x that is used in many high-end WiFi routers. This one
 integrates two ath10k wifi radios that were previously on separate chips.
 
 Other boards that got added for existing chips are:
 
 - On Ti OMAP family:
   - Amazon Kindle Fire, first generation, tablet and ebook reader
   - OnRISC Baltos iR 2110 and 3220 embedded industrial PCs
   - TI AM5728 IDK, TI AM3359 ICE-V2, and TI DRA722 Rev C EVM
     development systems
 
 - On Samsung EXYNOS platform:
   - Samsung ARTIK5 evaluation board, see
     https://www.artik.io/modules/overview/artik-5/
 
 - On NXP i.MX platforms:
   - Ka-Ro electronics TX6S-8034, TX6S-8035, TX6U-8033, TX6U-81xx,
     TX6Q-1036, TX6Q-1110/-1130, TXUL-0010 and TXUL-0011 industrial
     SoM modules
   - Embest MarS Board i.MX6Dual DIY platform
   - Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX and
     SoloX Nitrogen6sx embedded boards
   - Technexion Pico i.MX6UL compute module
   - ZII VF610 Development Board
 
 - On Marvell embedded (mvebu, orion, kirkwood) platforms:
   - Linksys Viper (E4200v2 / EA4500) WiFi router
   - Buffalo Kurobox Pro NAS
 
 - On Qualcomm Snapdragon:
   - Arrow DragonBoard 600c (96boards) with APQ8064 Snapdragon 600
 
 - On Rockchips platform:
   - mqmaker MiQi single-board computer
 
 - On Altera SoCFPGA:
   - samtec VIN|ING 1000 vehicle communication interface
 
 - On Allwinner Sunxi platforms:
   - Dserve DSRV9703C tablet
   - Difrnce DIT4350 tablet
   - Colorfly E708 Q1 tablet
   - Polaroid MID2809PXE04 tablet
   - Olimex A20 OLinuXino LIME2 single board computer
   - Xunlong Orange Pi 2, Orange Pi One, and Orange Pi PC
     single board computers
 
 Across many platforms, bug fixes went in to address warnings that
 dtc now emits with 'make dtbs W=1'. Further changes for device enablement
 went into Ti OMAP, bcm283x (Raspberry Pi), bcm47xx (wifi router),
 Ti Davinci, Samsung EXYNOS, Marvell mvebu/kirkwood/orion, NXP i.MX/Vybrid
 NXP LPC18xx, NXP LPC32xx, Renesas shmobile/r-mobile/r-car, Rockchips
 rk3xxx, ST Ux500, ST STi, Atmel AT91/SAMA5, Altera SoCFPGA, Allwinner
 Sunxi, Sigma Designs Tango, NVIDIA Tegra, Socionext Uniphier and ARM
 Versatile Express.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVzuXhGCrR//JCVInAQJXjhAA1bV0fbREflRQrlXdMb4rNesygH8ikaja
 gOYHE1yO+tSitHZ5g4w2yAFIEK7DzFdO5rz53BEINZfLCj4LO4495/z9ipqZQEjC
 rw5IL89jAn8x4wF791SHjLpmmNRbHN2vjLcsX3ShJIHckip/jIbiU2aFJuohA0TU
 jxpPAZzhaKsu/rDaVzHMS/im4LbZQ2qI3DxUUn6Kt8c468i4Ns22sowqSjh2xO/X
 YiwHD0eAvDrySfMGiNT82wMMTfMF2KfXZGB885isMP4hK8OIDrOnI5nM9rxyRFfu
 N14o0+tN1S2JzBHnqOOpib6JxYyCVr+QTjsKGAyR5X1mGINIhX8f1gy0EvFFxXKT
 rIATc5VTeo4gc1quij8RVtDEp/4iJ8GspH4WGMh1F8tjTe+WUxeSMkxdf6/QY1+Q
 vZKT0KKihoJQu1xI62NjnaRbfbhwx2BSWehwgXVd72lD19dG5LPw+Nj6/8+Bgouc
 YxJahgkB9MMtHoNp8huMg33Gr9a07/yVxc4CztXtf7N9phd0nEXov2iM1aBgazLU
 8IVd3Z9lZA+4iGVcj3oBJ6K1IkiCmg2qoNyF6tcInR5vPjKLECuxyuZw8VKuUuHD
 k/s/rymSGRlDN5i4F0h0r4MvQ9gkYfwk8xiL3ofmwYHwo103Q7b7Cw55XRk88EoB
 appd5QA+pko=
 =Nx46
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Arnd Bergmann:
 "These are all the updates to device tree files for 32-bit platforms,
  which as usual makes up the bulk of the ARM SoC changes: 462 non-merge
  changesets, 450 files changed, 23340 insertions, 5216 deletions.

  The three platforms that are added with the "soc" branch are here as
  well, and we add some related machine files:

   - For Aspeed AST2400/AST2500, we get the evaluation platform and the
     Tyan Palmetto POWER8 mainboard that uses the AST2400 BMC
   - For Oxnas 810SE, the Western Digital "My Book World Edition" is
     added as the only platform at the moment.
   - For ARM MPS2, the AN385 (Cortex-M3) and AN399 (Cortex-M7) are
     supported

  On the ARM Realview development platform, we now support all machines
  with device tree, previously only the board files were supported,
  which in turn will likely be removed soon.

  Qualcomm IPQ4019 is the second generation ARM based "Internet
  Processor", following the IPQ806x that is used in many high-end WiFi
  routers.  This one integrates two ath10k wifi radios that were
  previously on separate chips.

  Other boards that got added for existing chips are:

  Ti OMAP family:
     - Amazon Kindle Fire, first generation, tablet and ebook reader
     - OnRISC Baltos iR 2110 and 3220 embedded industrial PCs
     - TI AM5728 IDK, TI AM3359 ICE-V2, and TI DRA722 Rev C EVM
       development systems

  Samsung EXYNOS platform:
     - Samsung ARTIK5 evaluation board, see

        https://www.artik.io/modules/overview/artik-5/

  NXP i.MX platforms:
     - Ka-Ro electronics TX6S-8034, TX6S-8035, TX6U-8033, TX6U-81xx,
       TX6Q-1036, TX6Q-1110/-1130, TXUL-0010 and TXUL-0011 industrial
       SoM modules
     - Embest MarS Board i.MX6Dual DIY platform
     - Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX and SoloX
       Nitrogen6sx embedded boards
     - Technexion Pico i.MX6UL compute module
     - ZII VF610 Development Board

  Marvell embedded (mvebu, orion, kirkwood) platforms:
     - Linksys Viper (E4200v2 / EA4500) WiFi router
     - Buffalo Kurobox Pro NAS

  Qualcomm Snapdragon:
     - Arrow DragonBoard 600c (96boards) with APQ8064 Snapdragon 600

  Rockchips platform:
     - mqmaker MiQi single-board computer

  Altera SoCFPGA:
     - samtec VIN|ING 1000 vehicle communication interface

  Allwinner Sunxi platforms:
     - Dserve DSRV9703C tablet
     - Difrnce DIT4350 tablet
     - Colorfly E708 Q1 tablet
     - Polaroid MID2809PXE04 tablet
     - Olimex A20 OLinuXino LIME2 single board computer
     - Xunlong Orange Pi 2, Orange Pi One, and Orange Pi PC single board
       computers

  Across many platforms, bug fixes went in to address warnings that dtc
  now emits with 'make dtbs W=1'.  Further changes for device enablement
  went into Ti OMAP, bcm283x (Raspberry Pi), bcm47xx (wifi router), Ti
  Davinci, Samsung EXYNOS, Marvell mvebu/kirkwood/orion, NXP i.MX/Vybrid
  NXP LPC18xx, NXP LPC32xx, Renesas shmobile/r-mobile/r-car, Rockchips
  rk3xxx, ST Ux500, ST STi, Atmel AT91/SAMA5, Altera SoCFPGA, Allwinner
  Sunxi, Sigma Designs Tango, NVIDIA Tegra, Socionext Uniphier and ARM
  Versatile Express"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (458 commits)
  ARM: dts: tango4: Import watchdog node
  ARM: dts: tango4: Update cpus node for cpufreq
  ARM: dts: tango4: Update DT to match clk driver
  ARM: dts: tango4: Initial thermal support
  arm/dst: Add Aspeed ast2500 device tree
  arm/dts: Add Aspeed ast2400 device tree
  ARM: sun7i: dt: Add pll3 and pll7 clocks
  ARM: dts: sunxi: Add a olinuxino-lime2-emmc
  ARM: dts: at91: sama5d4: add trng node
  ARM: dts: at91: sama5d3: add trng node
  ARM: dts: at91: sama5d2: add trng node
  ARM: dts: at91: at91sam9g45 family: reduce the trng register map size
  ARM: sun4i: dt: Add pll3 and pll7 clocks
  ARM: sun5i: chip: Enable the TV Encoder
  ARM: sun5i: r8: Add display blocks to the DTSI
  ARM: sun5i: a13: Add display and TCON clocks
  ARM: dts: ux500: configure the accelerometers open drain
  ARM: mx5: dts: Enable USB OTG on M53EVK
  ARM: dts: imx6ul-14x14-evk: Add audio support
  ARM: dts: imx6qdl: Remove unneeded unit-addresses
  ...
2016-05-18 12:48:46 -07:00
Linus Torvalds
9896c7b57e ARM: SoC platform updates for v4.7
We get support for three new 32-bit SoC platforms this time. The amount
 of changes in arch/arm for any of them is miniscule, as all the
 interesting code is in device driver subsystems (irqchip, clk, pinctrl,
 ...) these days. I'm listing them here, as the addition of the Kconfig
 statement is the main relevant milestone for a new platform. In each
 case, some drivers are are shared with existing platforms, while
 other drivers are added for v4.7 as well, or come in a later release.
 
 - The Aspeed platform is probably the most interesting one, this is
   what most whitebox servers use as their baseboard management
   controller. We get support for the very common ast2400 and ast2500
   SoCs. The OpenBMC project focuses on this chip, and the LWN
   article about their ELC 2016 presentation at
   https://lwn.net/Articles/683320/ triggered the submission, but the
   code comes from IBM's OpenPOWER team rather than the team at
   Facebook. There are still a lot more drivers that need to get added
   over time, and I hope both teams can work together on that.
 
 - OXNAS is an old platform for Network Attached Storage devices
   from Oxford Semiconductor. There are models with ARM10 (!) and
   ARM11MPCore cores, but for now, we only support the original ARM9
   based versions.
   The product lineup was subsequently part of PLX, Avago and now the
   new Broadcom Ltd. https://wiki.openwrt.org/doc/hardware/soc/soc.oxnas
   has some more information.
 
 - V2M-MPS2 is a prototyping platform from ARM for their Cortex-M
   cores and is related to the existing Realview / Versatile Express
   lineup, but without MMU. We now support various NOMMU platforms,
   so adding a new one is fairly straightforward.
   http://infocenter.arm.com/help/topic/com.arm.doc.100112_0100_03_en/
   has detailed information about the platform.
 
 Other noteworthy updates:
 
 - Work on LPC32xx has resumed, and Vladimir Zapolskiy and Sylvain Lemieux
   are now maintaining the platform. This is an older ARM9 based
   platform from NXP (not Freescale), but it remains in use in embedded
   markets.
 
 - Kevin Hilman is now co-maintaining the Amlogic Meson platform for both
   32-bit and 64-bit ARM, and started contributing some patches.
 
 - As is often the case, work on the OMAP platforms makes up the bulk of
   the actual SoC code changes in arch/arm, but there isn't a lot of
   that either.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVzuXX2CrR//JCVInAQLTghAA0f+2V2wC6HVBfDhT1YmhbAkPF1KzgLbB
 h30fN6BtIe9mE3kR69uWgwPSzn4hTKEQXoC9m6S+XClTn6MKPrbCEYDZl4ZwIER8
 XDamxJV+6oTG+GKtKpHFkC4WPJkLthEuD34gr2xU8DFrU+y2Y5QNXi5wvSsBp8WS
 6C/70HQEy35uSyOjbjVlPi0/UKoelVw9dCO7HZBOb9lTd88hC4Gx90KFwpq6Ievf
 L20VNgOESC2y6kRbuLNbhQVsbT2Ijyz9NccVM5owFEbHkXDxJ0vQVzrNM999DVjb
 CC2v0NZMLPNJQn2RvC172QBOsOERxIRkZdJHcifydl7i2QNpr8+/YSnS7OSx3dA/
 3ZmTLejaiGUXdTGEI9dHy77s+adwTzGsH+INKotQG8qwUXzCLuUWN3GGK+Qof5Rk
 jbsGAoZ7GQz1/7NdEOcGW6pxD4mllk3McKMzNlMmddRDUPhSUg3WXu0c1AWGzfA1
 ulk6fQDaTUjvs7nokuozhguKz8OKrT6S7x/iES5tPbXLhuDqfnUdYiQ+7m2beRb5
 L9S9KK95HXnKJAI9WLOELj1vCrfbCGjlwz8YVSrwPtwwzP/wbB1Ni6tmwLrxHbLk
 SGyJEMnPs3mARIPDwDysyOs+3OUSx04uYW6YTSh8XyKNIxTCflRxr/iM5YyYEMvt
 lXMrp1sh4hc=
 =5oFu
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "We get support for three new 32-bit SoC platforms this time.

  The amount of changes in arch/arm for any of them is miniscule, as all
  the interesting code is in device driver subsystems (irqchip, clk,
  pinctrl, ...) these days.  I'm listing them here, as the addition of
  the Kconfig statement is the main relevant milestone for a new
  platform.  In each case, some drivers are are shared with existing
  platforms, while other drivers are added for v4.7 as well, or come in
  a later release.

   - The Aspeed platform is probably the most interesting one, this is
     what most whitebox servers use as their baseboard management
     controller.  We get support for the very common ast2400 and ast2500
     SoCs.  The OpenBMC project focuses on this chip, and the LWN
     article about their ELC 2016 presentation at

        https://lwn.net/Articles/683320/

     triggered the submission, but the code comes from IBM's OpenPOWER
     team rather than the team at Facebook.  There are still a lot more
     drivers that need to get added over time, and I hope both teams can
     work together on that.

   - OXNAS is an old platform for Network Attached Storage devices from
     Oxford Semiconductor.  There are models with ARM10 (!) and
     ARM11MPCore cores, but for now, we only support the original ARM9
     based versions.  The product lineup was subsequently part of PLX,
     Avago and now the new Broadcom Ltd.

        https://wiki.openwrt.org/doc/hardware/soc/soc.oxnas

     has some more information.

   - V2M-MPS2 is a prototyping platform from ARM for their Cortex-M
     cores and is related to the existing Realview / Versatile Express
     lineup, but without MMU.

     We now support various NOMMU platforms, so adding a new one is
     fairly straightforward.

        http://infocenter.arm.com/help/topic/com.arm.doc.100112_0100_03_en/

     has detailed information about the platform.

  Other noteworthy updates:

   - Work on LPC32xx has resumed, and Vladimir Zapolskiy and Sylvain
     Lemieux are now maintaining the platform.

     This is an older ARM9 based platform from NXP (not Freescale), but
     it remains in use in embedded markets.

   - Kevin Hilman is now co-maintaining the Amlogic Meson platform for
     both 32-bit and 64-bit ARM, and started contributing some patches.

   - As is often the case, work on the OMAP platforms makes up the bulk
     of the actual SoC code changes in arch/arm, but there isn't a lot
     of that either"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
  MAINTAINERS: ARM/Amlogic: add co-maintainer, misc. updates
  MAINTAINERS: add ARM/NXP LPC32XX SoC specific drivers to the section
  MAINTAINERS: add new maintainers of NXP LPC32xx SoC
  MAINTAINERS: move ARM/NXP LPC32xx record to ARM section
  arm: Add Aspeed machine
  ARM: lpc32xx: remove duplicate const on lpc32xx_auxdata_lookup
  ARM: lpc32xx: remove leftovers of legacy clock source and provider drivers
  ARM: lpc32xx: remove reboot header file
  ARM: dove: Remove CLK_IS_ROOT
  ARM: orion5x: Remove CLK_IS_ROOT
  ARM: mv78xx0: Remove CLK_IS_ROOT
  ARM: davinci: da850: use clk->set_parent for async3
  ARM: davinci: Move clock init after ioremap.
  MAINTAINERS: Update ARM Versatile Express platform entry
  ARM: vexpress/mps2: introduce MPS2 platform
  MAINTAINERS: add maintainer entry for ARM/OXNAS platform
  ARM: Add new mach-oxnas
  irqchip: versatile-fpga: add new compatible for OX810SE SoC
  ARM: uniphier: correct the call order of of_node_put()
  MAINTAINERS: fix stale TI DaVinci entries
  ...
2016-05-18 12:35:46 -07:00
Linus Torvalds
f2b1e0f638 ARM: SoC cleanups and fixes for v4.7
Traditionally we've had two separate branches for cleanups and non-critical
 bug fixes, but both of these got smaller with each release and the differences
 are rather unclear now, so it seems more appropriate to have a combined
 branch.
 
 The most notably change is for OMAP, which gets a small rework to simplify
 handling of the AUXDATA mechanism used on machines that are not completely
 DT based yet, along with other work that is used as preparation for dropping
 the legacy board files.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVzuXUWCrR//JCVInAQKLTw/7BjSDJGRMsioOJ33Bg3LP92rJHPrVttWc
 vG8ULnc2QgcFTofDqgyPza2p2XuV868I7jEw4d/qDXOkeIw3ddLKjdCMzHq5r1CO
 G9W+ZlIw54na/Lh/CMVdMN1M3+64K4Fmp1IiBG66OhhFY8Zg3xterSEBk8V1+00K
 LNdiq6aJ1yROyHQtYbe+CtqTi/pJ9AmkBoRk4MnfgIMQyywESLlYDRkc3VXWEFXv
 3MBszgujEIE1R+XozC2VMDPrirdwjJv71x/tlE0nveOcAIam57B/6e5yLnVCQHpu
 UCK8x39cj/PwWlwoBExKXNMwbTKCy03AhXjkxDmJ3bD+7FK1sEtFzcyBiwOjiZQq
 CBttcwqGbtrGIsLbrbpEh9hAWbWNaparbChWW7RBC1sBIG11zd0HVYjzsKppmXsZ
 3LUl4KbkGw+grKa+AnsM+e9vGu+J+2vIh9sDVvs0dbXCZp5ILgExbnurxMwbg/J1
 QVycR8cjS2vs+79tTfakgVCSADvpdNbMcnYLz9GM5IS9j8bOlOhv1OhKtMFOue6y
 zCIZyffDJqhU0M3xk78JQSx3Rt4FacDjYJdlqN27AQ125QT2kYmfGR2x/en52ARS
 9QwauVp+5WcaoySdWi4TCpOMHV7FP40zhJ3G7TXZARaBccN0kCTfdF/QstLhAa0L
 u+TVN4A1cBw=
 =au7y
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-cleanups-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups and fixes from Arnd Bergmann:
 "Traditionally we've had two separate branches for cleanups and
  non-critical bug fixes, but both of these got smaller with each
  release and the differences are rather unclear now, so it seems more
  appropriate to have a combined branch.

  The most notable change is for OMAP, which gets a small rework to
  simplify handling of the AUXDATA mechanism used on machines that are
  not completely DT based yet, along with other work that is used as
  preparation for dropping the legacy board files"

* tag 'armsoc-cleanups-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: dts: exynos: Add interrupt line to MAX8997 PMIC on exynos4210-trats
  ARM: dts: exynos: Fix regulator name to avoid forbidden character on exynos4210-trats
  ARM: dts: exynos: Add MFC memory banks for Peach boards
  ARM: OMAP2+: n900 needs MMC slot names for legacy user space
  ARM: OMAP2+: Add more functions to pwm pdata for ir-rx51
  ARM: debug: remove extraneous DEBUG_HI3716_UART option
  ARM: OMAP2+: Simplify auxdata by using the generic match
  of/platform: Allow secondary compatible match in of_dev_lookup
  ARM: davinci: use IRQCHIP_DECLARE for cp_intc
  ARM: davinci: remove unused DA8XX_NUM_UARTS
  ARM: davinci: simplify call to of populate
  ARM: DaVinci USB: removed deprecated properties from MUSB config
  ARM: rockchip: Fix use of plain integer as NULL pointer
  ARM: realview: hide unused 'pmu_device' object
  soc: versatile: dynamically detect RealView HBI numbers
2016-05-18 12:28:29 -07:00
Linus Torvalds
3e21e5dda4 MMC core:
- Add TRACE support to be able to debug request flow
  - Extend/improve reset support for (e)MMC
  - Convert MMC pwrseq to platform device drivers
  - Use IDA for indexes
  - Some additional minor improvements
 
 MMC host:
  - sdhci: Re-factoring, clean-ups and improvements
  - sdhci-acpi|pci: Use MMC_CAP_AGGRESSIVE_PM for Broxton
  - omap/omap_hsmmc: Convert to use dma_request_chan()
  - usdhi6rol0: Add support for UHS modes
  - sh_mmcif: Update runtime PM support
  - tmio: Wolfram Sang steps in as maintainer
  - tmio: Add UHS-I mode support
  - sh_mobile_sdhi: Add UHS-I mode support
  - tmio/sdhi: Re-factoring, clean-ups and improvements
  - dw_mmc: Re-factoring and clean-ups
  - davinci: Convert to use dma_request_chan()
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXObOWAAoJEP4mhCVzWIwp3P4QANEb2z7NgUOw3DTti87r05gj
 N3PNafNIn7EjrtuBenaVNZUkGnjnzVanNYEMArGFIdeVhJ/ZCCJY1fUOK161NUmO
 1zRCOSufD9mRmhNtKb7jKu1YboXPRyKDaPVBTSSVrQPBw699tALGHCyAFvgFFKPD
 RvTPHSvH1vTy0VF50/ao/vl1ci89nxp6PBG/5xe1rorBHH1CYaiPgWtniMqc09Ix
 LiAO8Ox7fNd4WgK1tO56xJgEN2WA+Pbqy/7UabO+OjXoAMbPmO/l8vP0/9MqlBaX
 WZyDVwusQ9VhyDMsQ6tpZa6k8G3u3LOeolZWHKQqHpJYbNuwP+szh4gdJRb838CC
 AIz9UWC35ERn7yYD0aL5ok0TQhf4NJhJZibbGT2zNtnUVaSJnrJsqNtQOtEVLI9v
 KxzSiKsAAC0fGpyvze3/yU4JXc1yJd8EXm1iakF5KYBimC+wzVRqQmuDUPrLjTG5
 iypctu+yqb2OXmKbedsCruJ7nnLYAcGFKAaUSvCxn7AO4e44YEU7VIeWdC+NO6+s
 vf9HNfKwiorw2mkYNcfnJgTjzqXhimOp+94WAOUBMhi1w+OZ1TUlSriTyBbK3s1G
 rb4I37T7oLZIpDitfvmra9ORqNyUr0AlG3728BScN/Rc3731uEIBRd11h32hUoXk
 b8a9ORVfHZHMrv5+5T0N
 =89kT
 -----END PGP SIGNATURE-----

Merge tag 'mmc-v4.7' of git://git.linaro.org/people/ulf.hansson/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add TRACE support to be able to debug request flow
   - Extend/improve reset support for (e)MMC
   - Convert MMC pwrseq to platform device drivers
   - Use IDA for indexes
   - Some additional minor improvements

  MMC host:
   - sdhci: Re-factoring, clean-ups and improvements
   - sdhci-acpi|pci: Use MMC_CAP_AGGRESSIVE_PM for Broxton
   - omap/omap_hsmmc: Convert to use dma_request_chan()
   - usdhi6rol0: Add support for UHS modes
   - sh_mmcif: Update runtime PM support
   - tmio: Wolfram Sang steps in as maintainer
   - tmio: Add UHS-I mode support
   - sh_mobile_sdhi: Add UHS-I mode support
   - tmio/sdhi: Re-factoring, clean-ups and improvements
   - dw_mmc: Re-factoring and clean-ups
   - davinci: Convert to use dma_request_chan()"

* tag 'mmc-v4.7' of git://git.linaro.org/people/ulf.hansson/mmc: (99 commits)
  mmc: mmc: Fix partition switch timeout for some eMMCs
  mmc: sh_mobile_sdhi: enable SDIO IRQs for RCar Gen3
  mmc: sdio: fall back to SDIO 1.0 for broken 1.1 cards
  mmc: sdhci-st: correct name of sd-uhs-sdr50 property
  MAINTAINERS: update entry for TMIO MMC driver
  mmc: block: improve logging of handling emmc timeouts
  mmc: sdhci: removed unneeded function wrappers
  mmc: core: remove the invalid message in mmc_select_timing
  mmc: core: fix using wrong io voltage if mmc_select_hs200 fails
  mmc: sdhci-of-arasan: fix set_clock when a phy is supported
  mmc: omap: Use dma_request_chan() for requesting DMA channel
  mmc: mmc: Attempt to flush cache before reset
  mmc: sh_mobile_sdhi: check return value when changing clk
  mmc: sh_mobile_sdhi: only change the clock on RCar Gen2+
  mmc: tmio/sdhi: introduce flag for RCar 2+ specific features
  mmc: sh_mobile_sdhi: make clk_update function more compact
  mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel
  mmc: sdhci-of-at91: add presets setup
  mmc: usdhi6rol0: add pinctrl to set pin drive strength
  mmc: usdhi6rol0: add support for UHS modes
  ...
2016-05-16 19:10:40 -07:00
David Lechner
d0071281cf ARM: davinci: remove mmc dma resources
The davinci_mmc driver no longer uses platform resources for getting dma
channels. Instead lookup is now done using dma_slave_map.

Signed-off-by: David Lechner <david@lechnology.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-05-02 10:33:20 +02:00
Arnd Bergmann
04b9665b54 ARM: davinci: only use NVMEM when available
The davinci platform contains code that calls into the nvmem
subsystem, but that might be a loadable module, causing a
link error:

arch/arm/mach-davinci/built-in.o: In function `davinci_get_mac_addr':
:(.text+0x1088): undefined reference to `nvmem_device_read'
arch/arm/mach-davinci/built-in.o: In function `read_factory_config':
:(.text+0x214c): undefined reference to `nvmem_device_read'

Also, when NVMEM is completely disabled, the functions fail with
nonobvious error messages.

This ensures we only call the API functions when the code is actually
reachable from the board file, and otherwise prints a unique log
message.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: bec3c11bad ("misc: at24: replace memory_accessor with nvmem_device_read")
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-04-29 11:58:38 -07:00
David Lechner
3f2a09d57b ARM: davinci: da850: use clk->set_parent for async3
The da850 family of processors has an async3 clock domain that can be
muxed to either pll0_sysclk2 or pll1_sysclk2. Now that the davinci clocks
have a set_parent callback, we can use this to control the async3 mux
instead of a stand-alone function.

This adds a new async3_clk and sets the appropriate child clocks. The
default is use to pll1_sysclk2 since it is not affected by processor
frequency scaling.

Signed-off-by: David Lechner <david@lechnology.com>
[nsekhar@ti.com: drop unnecessary comment]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-27 16:04:41 +05:30
David Lechner
6fc9ebbdeb ARM: davinci: Move clock init after ioremap.
Some clocks (such as the USB PHY clocks in DA8xx) will need to use iomem.
The davinci_common_init() function must be called before the ioremap, so
the clock init is now split out as separate function.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-27 16:03:49 +05:30
David Lechner
801a6aa9aa ARM: davinci: da8xx-dt: Add spi0 lookup for clock matching
Add AUXDATA needed to match the device-tree node for spi0 to the
non-device-tree clock.

Signed-off-by: David Lechner <david@lechnology.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
[nsekhar@ti.com: commit description updates]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-25 18:57:59 +05:30
David Lechner
8a9d088f66 ARM: davinci: clk: add set_parent callback for mux clocks
Introduce a set_parent callback that will be used for mux clocks, such as
the USB PHY muxes and the async3 clock domain mux.

Signed-off-by: David Lechner <david@lechnology.com>
[nsekhar@ti.com: checkpatch fixes]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-14 15:31:48 +05:30
David Lechner
86cad16087 ARM: davinci: da8xx: move usb code to new file
We will be adding more da8xx-specific code for phy and clocks, so it will
be better to have this in a separate file. This way we don't have a bunch
of #ifdefs for all of the da8xx stuff.

While at it, fix some checkpatch warnings coming from existing code.

Signed-off-by: David Lechner <david@lechnology.com>
[nsekhar@ti.com: typo and checkpatch fixes]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-14 15:31:42 +05:30
David Lechner
9a7f2fc840 ARM: davinci: use IRQCHIP_DECLARE for cp_intc
Remove boilerplate code by using IRQCHIP_DECLARE macro.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-14 12:09:50 +05:30
David Lechner
9fb69a27e9 ARM: davinci: remove unused DA8XX_NUM_UARTS
DA8X_NUM_UARTS not used in the code anywhere and should be determined
by DT anyway.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-14 12:09:49 +05:30
David Lechner
2f44a8d141 ARM: davinci: simplify call to of populate
Take advantage of of_platoform_default_populate convience function.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-14 12:09:49 +05:30
Petr Kulhavy
371a13d415 ARM: DaVinci USB: removed deprecated properties from MUSB config
The following properties of the musb_hdrc_config structure
are deprecated and no longer required/used by the MUSB driver:

.dyn_fifo
.soft_con
.dma
.dma_channels
.eps_bits

Signed-off-by: Petr Kulhavy <petr@barix.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-14 11:50:05 +05:30
Petr Kulhavy
6c8f735922 ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for i2c1
Add OF_DEV_AUXDATA entry for second i2c on the da850 DT board driver
to use i2c clock.

Signed-off-by: Petr Kulhavy <petr@barix.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-04-14 11:41:04 +05:30
Linus Torvalds
33b3d2e88c ARM: SoC platform updates for v4.6
Newly added support for additional SoCs:
 
 - Axis Artpec-6 SoC family
 - Allwinner A83T SoC
 - Mediatek MT7623
 - NXP i.MX6QP SoC
 - ST Microelectronics stm32f469 microcontroller
 
 New features:
 - SMP support for Mediatek mt2701
 - Big-endian support for NXP i.MX
 - DaVinci now uses the new DMA engine dma_slave_map
 - OMAP now uses the new DMA engine dma_slave_map
 - earlyprintk support for palmchip uart on mach-tango
 - delay timer support for orion
 
 Other:
 - Exynos PMU driver moved out to drivers/soc/
 - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP, uniphier
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVu68DGCrR//JCVInAQIHVQ//Wblms+NKj3aKh6m2Sscs/YkSbFaQ4sY2
 rNyfxLIYsLXkth1kbdHRFSMyL68Ym+xutErgw/3HQPB2D1YtYJE3VJ/y8AU92SU3
 oHyQIty+atB8d8zBbtlkWmat94NIfYf0I8PQETreGb1LMaJqAf0mDEDAyorTLZcZ
 UtQ817Ihn7urqwdTJpTO58V41RmY/vflbHI5T6bIjUJn6fF1e/7+VqtMIfq5sjJ6
 0EPEQdu8s5AJ7gcGlGi9I5gAtSnWSA/9phAxul9P8/HrMpUWIxreSEAy8FY7W14F
 4TON3sQrnw7nyA72U80KGIXhgLy7SbEmHcSqyy4YJK3ycdk6VYk0CBO7nWVYAiD1
 knLisOH6jwe0LIj9WXiRR+Y2Q53pXN8SF77pLDahSnvuShnYEjEH5uELHtxe7Vxh
 gn+NH1rDkRTgdYgt4RWlVyUoLkddQWzLb1m4QyQlvxtTR25cJJayXdVX2MRrNPF5
 c1zRa9HH+b8LJQIMdWfo/NoHhHtftkkGGsqHAAaypZqdpyk0j2HpJYk5ecPR4f5C
 /8o/h/5xOI9gEzp/DVYSZ1VAvRqBQGIDfKBXWq6GuoZaF0aN8ISe5IxFn5Yx2F46
 fNaxqiNpWmyywl8D+tSWPFK6aE21AXKGi5zIzexZZqy283aDjlUPI+tgF2GKIuKP
 3ayYTDeBpLI=
 =ynNj
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "Newly added support for additional SoCs:
   - Axis Artpec-6 SoC family
   - Allwinner A83T SoC
   - Mediatek MT7623
   - NXP i.MX6QP SoC
   - ST Microelectronics stm32f469 microcontroller

  New features:
   - SMP support for Mediatek mt2701
   - Big-endian support for NXP i.MX
   - DaVinci now uses the new DMA engine dma_slave_map
   - OMAP now uses the new DMA engine dma_slave_map
   - earlyprintk support for palmchip uart on mach-tango
   - delay timer support for orion

  Other:
   - Exynos PMU driver moved out to drivers/soc/
   - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP,
     uniphier"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: uniphier: rework SMP code to support new System Bus binding
  ARM: uniphier: add missing of_node_put()
  ARM: at91: avoid defining CONFIG_* symbols in source code
  ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1
  ARM: imx: Make reset_control_ops const
  ARM: imx: Do L2 errata only if the L2 cache isn't enabled
  ARM: imx: select ARM_CPU_SUSPEND only for imx6
  dmaengine: pxa_dma: fix the maximum requestor line
  ARM: alpine: select the Alpine MSI controller driver
  ARM: pxa: add the number of DMA requestor lines
  dmaengine: mmp-pdma: add number of requestors
  dma: mmp_pdma: Add the #dma-requests DT property documentation
  ARM: OMAP2+: Add rtc hwmod configuration for ti81xx
  ARM: s3c24xx: Avoid warning for inb/outb
  ARM: zynq: Move early printk virtual address to vmalloc area
  ARM: DRA7: hwmod: Add custom reset handler for PCIeSS
  ARM: SAMSUNG: Remove unused register offset definition
  ARM: EXYNOS: Cleanup header files inclusion
  drivers: soc: samsung: Enable COMPILE_TEST
  MAINTAINERS: Add maintainers entry for drivers/soc/samsung
  ...
2016-03-20 14:57:08 -07:00
Linus Torvalds
dae0b74eb7 ARM: SoC non-urgent fixes for v4.6
As usual, we queue up a few fixes that don't seem urgent enough to go in
 through -rc.
 
  - a number of randconfig warning fixes from Arnd
  - various small fixes for OMAP
  - one somewhat larger patch to restore the OMAP3 cpuidle
    tuning that was lost in a cleanup
  - a small regression fix for cns3xxx PCI
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVu67XGCrR//JCVInAQK8mBAAjW3INXnuQ84Zvb5RLJS+1aiEEgnuOEwM
 Yvxr+MzSMsXS5V9FMGaUk/bXxfGMFILAQ5j471ZanGZkDZwAiJ2tdwreKlyYMHU3
 9PPWtHKYR6BhIRFYovftVpDkbgw3cwdfyIvves7Aa4XyeGNCQjryNQndZci8IZlN
 5I4ff3ea8ZKsDQ1jDXmYw6QENCZl9M4yatLnaOcfdgCRro5VRvdavqIofk+ynv2S
 McUm5WGr/BKiT92MThWIhIskuMNZiUmm7L3zgOYE2+zUgw6tFvreQvAY+qtxk6qt
 0K4SIV04JGevBHl2CENGF1Kctq5z+n/Jcywd9yJBqYxvWMYgnJokczjkxKTyf9X8
 8eU9LEtJsrAzJYw6TXvyjK0EphTJTwg1kO/wk4/HFIM2B+AzGgcbotakIDokrR/i
 I2rgnCqExQZqdUzhgFHg28a0Bx9y2Giu6wCCkwRZKpKW74d5E6esAsTbvggmXvbN
 35G0MSLTeeZDbvN6xLOMZc7qCfyWlO9huxiHPn0Q9eth8RcqfywB4vbNdEli/P4o
 NW+up5wTo6Ifc9Jgf8z7LB9b56i/9LMkSBh/OdCKfHEZlHi5/dZ/TR21CngtpcX1
 hi91vJLH0axCylBVE599qxJYoWjoR8nHz7kD6G4vqXtiTfVcxozUM5NKSD8AXn+Q
 NhYT2BTUh0o=
 =YJmM
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC non-urgent fixes from Arnd Bergmann:
 "As usual, we queue up a few fixes that don't seem urgent enough to go
  in through -rc.

   - a number of randconfig warning fixes from Arnd
   - various small fixes for OMAP
   - one somewhat larger patch to restore the OMAP3 cpuidle tuning that
     was lost in a cleanup
   - a small regression fix for cns3xxx PCI"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
  CNS3xxx: Fix PCI cns3xxx_write_config()
  MAINTAINERS: unify email addrs for Kevin Hilman
  CNS3xxx: remove unused *_VIRT definitions
  ARM: OMAP2+: Fix hwmod clock for l4_ls
  soc: TI knav_qmss: fix dma_addr_t printing
  ARM: prima2: always enable reset controller
  ARM: socfpga: hide unused functions
  ARM: ux500: fix ureachable iounmap()
  ARM: ks8695: fix __initdata annotation
  ARM: mvebu: mark mvebu_hwcc_pci_nb as __maybe_unused
  ARM: mv78xx0: avoid unused function warning
  ARM: orion: only select I2C_BOARDINFO when using I2C
  ARM: OMAP2+: Fix out of range register access with syscon_config.max_register
  ARM: OMAP3: Add cpuidle parameters table for omap3430
  ARM: davinci: make I2C support optional
  ARM: davinci: DA8xx+DMx combined kernels need PATCH_PHYS_VIRT
  ARM: davinci: avoid unused mityomapl138_pn_info variable
  ARM: davinci: limit DT support to DA850
  ARM: DRA7: hwmod: Add reset data for PCIe
  ARM: DRA7: hwmod: Fix OCP2SCP sysconfig
  ...
2016-03-20 14:26:57 -07:00
Linus Torvalds
de06dbfa78 Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
 "Another mixture of changes this time around:

   - Split XIP linker file from main linker file to make it more
     maintainable, and various XIP fixes, and clean up a resulting
     macro.

   - Decompressor cleanups from Masahiro Yamada

   - Avoid printing an error for a missing L2 cache

   - Remove some duplicated symbols in System.map, and move
     vectors/stubs back into kernel VMA

   - Various low priority fixes from Arnd

   - Updates to allow bus match functions to return negative errno
     values, touching some drivers and the driver core.  Greg has acked
     these changes.

   - Virtualisation platform udpates form Jean-Philippe Brucker.

   - Security enhancements from Kees Cook

   - Rework some Kconfig dependencies and move PSCI idle management code
     out of arch/arm into drivers/firmware/psci.c

   - ARM DMA mapping updates, touching media, acked by Mauro.

   - Fix places in ARM code which should be using virt_to_idmap() so
     that Keystone2 can work.

   - Fix Marvell Tauros2 to work again with non-DT boots.

   - Provide a delay timer for ARM Orion platforms"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (45 commits)
  ARM: 8546/1: dma-mapping: refactor to fix coherent+cma+gfp=0
  ARM: 8547/1: dma-mapping: store buffer information
  ARM: 8543/1: decompressor: rename suffix_y to compress-y
  ARM: 8542/1: decompressor: merge piggy.*.S and simplify Makefile
  ARM: 8541/1: decompressor: drop redundant FORCE in Makefile
  ARM: 8540/1: decompressor: use clean-files instead of extra-y to clean files
  ARM: 8539/1: decompressor: drop more unneeded assignments to "targets"
  ARM: 8538/1: decompressor: drop unneeded assignments to "targets"
  ARM: 8532/1: uncompress: mark putc as inline
  ARM: 8531/1: turn init_new_context into an inline function
  ARM: 8530/1: remove VIRT_TO_BUS
  ARM: 8537/1: drop unused DEBUG_RODATA from XIP_KERNEL
  ARM: 8536/1: mm: hide __start_rodata_section_aligned for non-debug builds
  ARM: 8535/1: mm: DEBUG_RODATA makes no sense with XIP_KERNEL
  ARM: 8534/1: virt: fix hyp-stub build for pre-ARMv7 CPUs
  ARM: make the physical-relative calculation more obvious
  ARM: 8512/1: proc-v7.S: Adjust stack address when XIP_KERNEL
  ARM: 8411/1: Add default SPARSEMEM settings
  ARM: 8503/1: clk_register_clkdev: remove format string interface
  ARM: 8529/1: remove 'i' and 'zi' targets
  ...
2016-03-19 16:31:54 -07:00
Andrew Lunn
bec3c11bad misc: at24: replace memory_accessor with nvmem_device_read
Now that the AT24 uses the NVMEM framework, replace the
memory_accessor in the setup() callback with nvmem API calls.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-01 16:55:48 -08:00
Arnd Bergmann
4d2b7d4cb4 ARM: 8532/1: uncompress: mark putc as inline
When CONFIG_DEBUG_ICEDCC is set, we don't use the platform
specific putc() function, but use icedcc_putc() instead, so
putc is unused and causes a compile time warning:

In file included from ../arch/arm/boot/compressed/misc.c:28:0:
arch/arm/mach-rpc/include/mach/uncompress.h:79:13: warning: 'putc' defined but not used [-Wunused-function]
arch/arm/mach-w90x900/include/mach/uncompress.h:30:13: warning: 'putc' defined but not used [-Wunused-function]

On most platforms, this does not happen, because putc is defined
as 'static inline' so the compiler will automatically drop it
when it's unused.

This changes the remaining seven platforms to behave the same way.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-02-22 16:55:42 +00:00
Peter Ujfalusi
2137d54d16 ARM: davinci: dm646x: Add dma_slave_map to edma
Provide the dma_slave_map to edma which will allow us to move the drivers
to the new, simpler dmaengine API and we can remove the DMA resources also
for the devices.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[nsekhar@ti.com: fix typos in code]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-02-22 15:55:27 +05:30
Peter Ujfalusi
a4f86c55b9 ARM: davinci: dm644x: Add dma_slave_map to edma
Provide the dma_slave_map to edma which will allow us to move the drivers
to the new, simpler dmaengine API and we can remove the DMA resources also
for the devices.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[nsekhar@ti.com: typo fixes in code]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-02-22 15:53:34 +05:30
Peter Ujfalusi
0c750e1fe4 ARM: davinci: dm365: Add dma_slave_map to edma
Provide the dma_slave_map to edma which will allow us to move the drivers
to the new, simpler dmaengine API and we can remove the DMA resources also
for the devices.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-02-22 15:51:33 +05:30
Peter Ujfalusi
f7a3be503f ARM: davinci: dm355: Add dma_slave_map to edma
Provide the dma_slave_map to edma which will allow us to move the drivers
to the new, simpler dmaengine API and we can remove the DMA resources also
for the devices.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[nsekhar@ti.com: typo fixes in code]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-02-22 15:49:51 +05:30
Peter Ujfalusi
1ce9300bf7 ARM: davinci: devices-da8xx: Add dma_slave_map to edma
Provide the dma_slave_map to edma which will allow us to move the drivers
to the new, simpler dmaengine API and we can remove the DMA resources also
for the devices.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[nsekhar@ti.com: fix map for edma1]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-02-22 15:39:39 +05:30
Arnd Bergmann
8e58041114 ARM: davinci: make I2C support optional
The davinci platform has tried to get support for the EEPROM right,
but failed to get a clean build so far. At the moment, we get
a warning whenever CONFIG_SYSFS is disabled, as that is needed by
EEPROM_AT24:

warning: (MACH_DAVINCI_EVM && MACH_SFFSDR && MACH_DAVINCI_DM6467_EVM && MACH_DAVINCI_DM365_EVM && MACH_DAVINCI_DA830_EVM && MACH_MITYOMAPL138 && MACH_MINI2440) selects EEPROM_AT24 which has unmet direct dependencies (I2C && SYSFS)

Kevin Hilman initially added the 'select' to ensure that EEPROM_AT24
is always enabled in machines that really want it for normal operation
(i.e. for reading the MAC address). This broke when I2C was disabled,
and Russell King followed up with another patch to select that as
well.

I now see that the SYSFS dependency is still missing, which leaves
us with three options:

a) add 'select SYSFS' in addition to the others
b) change AT24_EEPPROM to work without sysfs (should be possible)
c) remove all those selects again and get the files to build when
   I2C is disabled.

I would really hate to do a) because adding select statements that
hardwire user-selectable symbols is generally a bad idea. I first
tried b) but then ended up redoing the patch from scratch to approach
c), so we can also remove the other selects.

I checked that CONFIG_I2C is still enabled with davinci_all_defconfig,
so that does not have to change.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 45b146d746 ("ARM: Davinci: Fix I2C build errors")
Fixes: 22ca466847 ("davinci: kconfig: select at24 eeprom for selected boards")
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-02-17 19:20:05 +05:30
Arnd Bergmann
ce32c5c5a3 ARM: davinci: DA8xx+DMx combined kernels need PATCH_PHYS_VIRT
We already forbid that combination when AUTO_ZRELADDR is disabled,
for the same reason that the two have their RAM at different
physical addresses as seen from the CPU.

This does the same change for PATCH_PHYS_VIRT: if you disable
either of the options, Kconfig now enforces that you have to
pick one or the other SoC family.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-02-17 19:13:24 +05:30
Arnd Bergmann
a32b4fe90a ARM: davinci: avoid unused mityomapl138_pn_info variable
The mityomapl138_pn_info structure belongs into the CPU_FREQ support
that is hidden behind an #ifdef, and causes a harmless warning when
that support is disabled:

mach-davinci/board-mityomapl138.c:59:28: error: 'mityomapl138_pn_info' defined but not used [-Werror=unused-variable]

This moves the variable definition where it belongs.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-02-17 19:11:18 +05:30
Arnd Bergmann
22c7b4a7c9 ARM: davinci: limit DT support to DA850
When da8xx-dt.c is built with onlu DA830 support but not DA850
support enabled, we get a compiler warning about unused symbols:

arch/arm/mach-davinci/da8xx-dt.c:28:20: warning: 'da8xx_init_irq' defined but not used [-Wunused-function]
 static void __init da8xx_init_irq(void)
arch/arm/mach-davinci/da8xx-dt.c:33:30: warning: 'da850_auxdata_lookup' defined but not used [-Wunused-variable]
 static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {

Obviously none of the file make sense for DA830, so we should not
even attempt this, so we can avoid the warning by ensuring it is
only built for 850, not 830.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2016-02-17 19:09:15 +05:30
Linus Torvalds
6b5a12dbca ARM: SoC multiplatform code changes for v4.5
This branch is the culmination of 5 years of effort to bring the ARMv6
 and ARMv7 platforms together such that they can all be enabled and
 boot the same kernel. It has been a tremendous amount of cleanup and
 refactoring by a huge number of people, and creation of several new
 (and major) subsystems to better abstract out all the platform details
 in an appropriate manner.
 
 The bulk of this branch is a large patchset from Arnd that brings several
 of the more minor and older platforms we have closer to multiplatform
 support.  Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview
 Much of this is moving around header files from old mach directories,
 but there are also some cleanup patches of debug_ll (lowlevel debug
 per-platform options) and other parts.
 
 Linus Walleij also has some patchs to clean up the older ARM Realview
 platforms by finally introducing DT support, and Rob Herring has some
 for ARM Versatile which is now DT-only. Both of these platforms are
 now multiplatform.
 
 Finally, a couple of patches from Russell for Dove PMU, and a fix from
 Valentin Rothberg for Exynos ADC, which were rebased on top of the
 series to avoid conflicts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIUAwUAVqAGcmCrR//JCVInAQLDog/4x9F0PHGmZhexGfFOpi2Od63Jjx55izRU
 zRXqRjjFjambOrZuOx8lEGDy/qzqKbsDU8D1P4IUugkDr2bLSXv+NTLZL1kNBIdm
 YOlJhw/BmzLYqauOHmBzGhtv1FDUk3rqbgTsP5tTWj5LpSkwjmqui3HBZpi+f3Rr
 YOn+NeQSARiw+51D0b106a9RFshQXRGgn5m3xFjLWhJqshb2z2Ew5cogX/zdwrrM
 ss1BFomxsvgk6S+snN6v7cEX2iXe3r89qNR5jEW5BgNpQGFsAUeXPr9zzH07L/Qq
 O7XLw9jt5MX/X5372zVHPb57WoflLbF9cFaaDUZV3eTqt3lC67BTxOtYIdC2i90k
 E5GYlsy88CRwT2EO+ok/6UTryph+hVv7JqHfbKfnISrbraMCK36DtDTpBIpZ9uYF
 rRB7ncJZUWBcyoe+qvitSl+2KV54iB1ez2RXsketxM98dDZsfB2M2ImFou1F/Pgg
 ALvpifPubi/uDe7xNUsSuaT6/3jAomBuNsxnkYJ3NeiH/+duZbOYGkzK/LlcjZyc
 UrA0IpLfwIFsBNzwfpZPZ1lkEu8Y1YZZ+Hv9k65q1wMuBDgrFI5zUeYrPZi4pN9T
 Yo1xP9FstVLDouJrpGZo12VIIxR1UBeGqfRI/BZ58LEF3PRq/g2OVFsdQia5gZKr
 ddiJKSL1Vw==
 =z1AW
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform code updates from Arnd Bergmann:
 "This branch is the culmination of 5 years of effort to bring the ARMv6
  and ARMv7 platforms together such that they can all be enabled and
  boot the same kernel.  It has been a tremendous amount of cleanup and
  refactoring by a huge number of people, and creation of several new
  (and major) subsystems to better abstract out all the platform details
  in an appropriate manner.

  The bulk of this branch is a large patchset from Arnd that brings
  several of the more minor and older platforms we have closer to
  multiplatform support.  Among these are MMP, S3C64xx, Orion5x, mv78xx0
  and realview Much of this is moving around header files from old mach
  directories, but there are also some cleanup patches of debug_ll
  (lowlevel debug per-platform options) and other parts.

  Linus Walleij also has some patchs to clean up the older ARM Realview
  platforms by finally introducing DT support, and Rob Herring has some
  for ARM Versatile which is now DT-only.  Both of these platforms are
  now multiplatform.

  Finally, a couple of patches from Russell for Dove PMU, and a fix from
  Valentin Rothberg for Exynos ADC, which were rebased on top of the
  series to avoid conflicts"

* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
  ARM: realview: don't select SMP_ON_UP for UP builds
  ARM: s3c: simplify s3c_irqwake_{e,}intallow definition
  ARM: s3c64xx: fix pm-debug compilation
  iio: exynos-adc: fix irqf_oneshot.cocci warnings
  ARM: realview: build realview-dt SMP support only when used
  ARM: realview: select apropriate targets
  ARM: realview: clean up header files
  ARM: realview: make all header files local
  ARM: no longer make CPU targets visible separately
  ARM: integrator: use explicit core module options
  ARM: realview: enable multiplatform
  ARM: make default platform work for NOMMU
  ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location
  ARM: defconfig: use correct debug_ll settings
  ARM: versatile: convert to multi-platform
  ARM: versatile: merge mach code into a single file
  ARM: versatile: switch to DT only booting and remove legacy code
  ARM: versatile: add DT based PCI detection
  ARM: pxa: mark ezx structures as __maybe_unused
  ARM: pxa: mark raumfeld init functions as __maybe_unused
  ...
2016-01-20 18:03:56 -08:00
Linus Torvalds
0c582826a1 ARM: SoC non-urgent fixes for v4.5
As usual, we queue up a few fixes that don't seem urgent enough to go in
 through -rc.
 
  - MAINTAINERS updates to add a list for brcmstb and fix a typo
  - A handful of fixes for OMAP 81xx, a recently resurrected platform so these
    can't be considered real regressions and thus got queued.
  - A couple of other small fixes for scoop, sa1100 and davinci
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWnrNxAAoJEIwa5zzehBx3UwUQAJ0sX5ScDfOjUJFn8ridx4OY
 8mcOuR+ij/f2srNUlvBFV4h/j+vOauZ2zlNAjhQtgAJH0PV1pQyTkyLRGoDSwIzI
 BDl79IhlMKte3iZ460q3fsVovgF2OwmDVfx0WXC72X6oOv3xt+FPlE4B543Q/v/r
 WmL+PvLitaUA44/aK7QwlXg+IVQn2jDP64Uqkal5oVuQCjpeu4tcL99AbCLi4FiZ
 XA5wcofKCo/wDeRK0uLWgcrHklVF4QIcvOPRIqvPvFc8V6OldAb22hTOozNa5gSp
 QG3S9IFO4OHrcEH6M7XqLaTQv8KXEwzAqFlrciJUBX7rm0cUlzRKwctr1MmLsnKi
 UpbHAqUHTLeJaNjKQGEX+vVKBa8PjLN4E05AuSa6TOgDbNgxRu0XUDbLR/9/bgbL
 towtcUGTLBYc8itWx+0jhy4ABU0/kZiUbVOdWi5ex76BHI8lnXSvV8dD02iLHmfU
 yLskruj/RMubvZxdj/kb7f/Tqn0eyi9TUGS2lqGE3Twj2MUwUaZaPskMEYMQgSZf
 U3NWTPCDWvXsBnaO3yENBWUBGA54fy7YfB0gZc7W9Lg+vbnw6j+I4/GX1Eb2toA+
 EU9qn6nZ3kI6NAo/2snVsaGLFnAAnsslX6evnFea9mqPMEbrzd9Yg5rUMK7nfsvv
 5DpvnsMKnlL80YykQ4yC
 =W+es
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull non-urgent ARM SoC fixes from Olof Johansson:
 "As usual, we queue up a few fixes that don't seem urgent enough to go
  in through -rc.

   - MAINTAINERS updates to add a list for brcmstb and fix a typo
   - A handful of fixes for OMAP 81xx, a recently resurrected platform
     so these can't be considered real regressions and thus got queued.
   - A couple of other small fixes for scoop, sa1100 and davinci"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP2+: Fix randconfig build warning for dm814_pllss_data
  ARM: sa1100/simpad: Be sure to clamp return value
  ARM: scoop: Be sure to clamp return value
  ARM: davinci: fix a problematic usage of WARN()
  ARM: davinci: only select WT cache if cache is enabled
  ARM: OMAP2+: Remove useless check for legacy booting for dm814x
  ARM: OMAP2+: Enable GPIO for dm814x
  ARM: dts: Fix dm814x pinctrl address and mask
  ARM: dts: Fix dm8148 control modules ranges
  ARM: OMAP2+: Fix timer entries for dm814x
  ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting
  ARM: OMAP2+: Add DPPLS clock manager for dm814x
  clk: ti: Add few dm814x clock aliases
  ARM: dts: Fix dm814x entries for pllss and prcm
  MAINTAINERS: gpio-brcmstb: Remove stray '>'
  MAINTAINERS: brcmstb: Include Broadcom internal mailing-list
2016-01-20 17:44:16 -08:00
Geliang Tang
5bcd927233 ARM: davinci: fix a problematic usage of WARN()
WARN() takes a condition and a format string. The condition was
omitted. So I added it.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-15 15:29:34 +05:30
Arnd Bergmann
1b50b0c1ce ARM: davinci: only select WT cache if cache is enabled
The DA830 chip only works if the dcache is in writethrough mode,
but that produces a harmless Kconfig warning if the cache happens
to be disabled:

warning: (ARCH_DAVINCI_DA830) selects CPU_DCACHE_WRITETHROUGH which has unmet direct dependencies ((CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_FA526) && !CPU_DCACHE_DISABLE)

This makes the select conditional so we don't have to worry
about the warning in randconfig builds any more.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-12-15 15:21:53 +05:30
Arnd Bergmann
3acf731cca ARM: davinci: make headers more local
Some header files are never included outside of a mach-davinci
directory and do not need to be made visible in include/mach,
so let's just move them all down one level.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sekhar Nori <nsekhar@ti.com>
2015-12-01 21:52:51 +01:00
Mauro Carvalho Chehab
b5dcee225c [media] include/media: split I2C headers from V4L2 core
Currently, include/media is messy, as it contains both the V4L2 core
headers and some driver-specific headers on the same place. That makes
harder to identify what core headers should be documented and what
headers belong to I2C drivers that are included only by bridge/main
drivers that would require the functions provided by them.

Let's move those i2c specific files to its own subdirectory.

The files to move were produced via the following script:
	mkdir include/media/i2c
	(cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done)
	(cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/*/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done)
	for i in include/media/*.h; do n=`basename $i`;  (for j in $(git grep -l $n); do dirname $j; done)|sort|uniq|grep -ve '^.$' > list; num=$(wc -l list|cut -d' ' -f1); if [ $num == 1 ]; then if [ "`grep i2c list`" != "" ]; then git mv $i include/media/i2c; fi; fi; done

And the references corrected via this script:
    MAIN_DIR="media/"
    PREV_DIR="media/"
    DIRS="i2c/"

    echo "Checking affected files" >&2
    for i in $DIRS; do
	for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do
		 n=`basename $j`
		git grep -l $n
	done
    done|sort|uniq >files && (
	echo "Handling files..." >&2;
	echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\";
	(
		cd include/$MAIN_DIR;
		for j in $DIRS; do
			for i in $(ls $j); do
				echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\";
			done;
		done;
		echo "cat > a && mv a \$i; done";
	);
	echo "Handling documentation..." >&2;
	echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\";
	(
		cd include/$MAIN_DIR;
		for j in $DIRS; do
			for i in $(ls $j); do
				echo "  perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\";
			done;
		done;
		echo "cat > a && mv a \$i; done"
	);
    ) >script && . ./script

Merged Sakari Ailus patch that moves smiapp.h to include/media/i2c.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-11-17 06:57:11 -02:00
Linus Torvalds
64fd8c8a0f ARM: SoC non-urgent fixes for v4.4
A handful of fixes that came in and didn't seem warranted to go in through
 the 4.3-rc cycle.
 
  - MAINTAINERS updates for one of the Broadcom platforms and lpc18xx
  - A couple of non-critical Davinci bugfixes
  - A fix to reset irq affinity for TI platforms (silences a warning at reboot)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWP7juAAoJEIwa5zzehBx3EVAP/AuoUkuWA/4G+ilDybXmbWls
 DDeIosQOXIriAqW9Um1aoHOTtyP2WxznoYk73xiyyR92PJkXUc/9slFU6rB6b9La
 3UZzGy6bo7jbjNOt6YI2yKrXWW2zCWhNIjfbcXeDC4+avnlYQjUKlKF/iXp26gG+
 rRs23cIBXc2lm5vxdwu/NvqpUUcxMN577RVFdW8nTqNGCZaP/buFYzm1P8dI5N0N
 KqXsJF62XbHtb911/URRLtLex3YvRqj25Jpxi2GsjzrPFALvgsW8voOKJSo3G3cH
 aXYc8b0n8i+pB1oOLBICIKpNXzcnPbnPs2gNBp63/X5Dw4oVVoaU1onQxyj08TFq
 PsQAqg5V0ym38tSnDmBa7p2sv6xoqrvXmOzx43/1JOjGVq991AlBMTJ4C4Vi8SCa
 R0+1l/YQcj9N4omDuxhyI3M9UQrDEDyxRWsOENMDh8AZ+/07uUCK5h7mHsSInPyS
 fXlORGVcAK1lIEYnOt5k8rarp+KFc+oifpaLFIIbTBhZZaDG/uT52aXkB7kj24oo
 4NFpNah8bHYzriXUkHDasZIDCS39T0otYNAXlK9hesYr0Ly0+0yQG8l+CcRbG/Mk
 07ZhEYDJvVvSb3uDi9VXLWmbAKqX5BHmBrYXPc0eP3lVPTeNkm5VYimYZeoBz/4e
 zr+W2uM8QMxVZmGEm4iH
 =iRbU
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC non-urgent fixes from Olof Johansson:
 "A handful of fixes that came in and didn't seem warranted to go in
  through the 4.3-rc cycle.

   - MAINTAINERS updates for one of the Broadcom platforms and lpc18xx
   - A couple of non-critical Davinci bugfixes
   - A fix to reset irq affinity for TI platforms (silences a warning at
     reboot)"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: update lpc18xx entry with more drivers
  soc: ti: reset irq affinity before freeing irq
  ARM: cns3xxx: pci: avoid potential stack overflow
  ARM: davinci: clock: Correct return values for API functions
  ARM: davinci: re-use %*ph specifier
  MAINTAINERS: add entry for the Broadcom Northstar Plus SoCs
2015-11-10 14:45:05 -08:00
Peter Ujfalusi
cef5b0da40 ARM: davinci: Add dma_mask to eDMA devices
The upcoming change to merge the arch/arm/common/edma.c into
drivers/dma/edma.c will need this change when booting daVinci devices in
no DT mode.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-14 19:57:11 +05:30
Peter Ujfalusi
7ab388e85f ARM: davinci: Use platform_device_register_full() to create pdev for eDMA
Convert the eDMA platform device creation to use
struct platform_device_info XXXXXX __initconst and
platform_device_register_full()
This will allow us to cleanly specify the dma_mask for the devices in an
upcoming patch.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-14 19:57:11 +05:30
Peter Ujfalusi
d4cb7f4042 ARM: davinci/common: Convert edma driver to handle one eDMA instance per driver
Currently we have one device created to handle all (maximum 2) eDMAs in the
system.
With this change all eDMA instance will have it's own device/driver.
This change is needed for further cleanups in the eDMA driver stack since
the one device/driver to handle all eDMAs in the system was not flexible
enough and prevents the upcoming work.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-14 19:57:11 +05:30
Peter Ujfalusi
f6c1a8a6ce ARM: davinci: clock: Correct return values for API functions
Fix the values returned by the publicly used functions.
These function should return 0 when they are called with clk == NULL in
similar manner as the clock API does to avoid different behavior in drivers
used by daVinci and other architectures.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-10-07 16:41:29 +05:30
Andy Shevchenko
d1a31e9757 ARM: davinci: re-use %*ph specifier
%*ph specifier allows to dump data in hex format using the pointer
to a buffer. This is suitable to use here.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-10-07 16:40:58 +05:30
Linus Torvalds
50686e8a3a ARM: SoC platform updates for v4.3
New or improved SoC support:
 
 - Addition of support for Atmel's SAMA5D2 SoC
 - Addition of Freescale i.MX6UL
 - Improved support of TI's DM814x platform
 - Misc fixes and improvements for RockChip platforms
 - Marvell MVEBU suspend/resume support
 
 A few driver changes that ideally would belong in the drivers branch are
 also here (acked by appropriate maintainers):
 
 - Power key input driver for Freescale platforms (svns)
 - RTC driver updates for Freescale platforms (svns/mxc)
 - Clk fixes for TI DM814/816X
 
 + a bunch of other changes for various platforms
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV5Mo6AAoJEIwa5zzehBx3VnMP/28LFJVUjIbd2xjJBo2gbSwV
 jN7uGlTkKU+1kHjZqnUPuirlBxBzsXKgRfBvCoeu0cPOggwmFcaF915/HHPz7xuz
 vTP7k98+Y5nSXScIohWkWCdZTpKKjve4sn74rXmiNakTUiuaHf5lKut/m7ldVrWd
 hN1o9W4LN+5O1mOYbc9ZD98v3bkDb6eu+a22oK7qemXiEiQi+NIMoDx+IR2bd4pA
 FeDaW7sOFWTEYU/p+M5nZNvI3n53P0/mlB5rPRiAYRjhQf9DrWHm5G7HdnMkUkgo
 /s8/QlVjBkJwhkY0TqpwtHY23JjSSB6UtCnXzb1eVAkX1nJN6PJQpcpCz1zJhd9q
 +sJ2k1zEvrfomJCK7/iZ1ubQE09KlJLEeb8xi5xCwD0MBOBAYC31bovDVAswCitV
 8NHnfltEG+wCMyX955eqqGkVxkcw8sJMJUK5A95aK6w+vKqjd7gUgLJjXFC1u4eN
 ECuVVUf1hVmUEmM799CDayTlfGDt4oGLmHGao+SiSCVc1XbG9HkWr7Lcgr6u9UHr
 lNv3RIe6Axb85xxIU0/9hqLHrtB85uEQjjlbnQx3o7u8RsSOeaiZvCz4BzcjP9E1
 VGyD6zkRWhuDiMFlPVXiAX0qIH5xSjIWkC0wPNJNy8eWFH9tkfGL0mOlLbl09oGR
 gtuvOrjbF/BhILkPw38y
 =8T5Z
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "New or improved SoC support:

   - add support for Atmel's SAMA5D2 SoC
   - add support for Freescale i.MX6UL
   - improved support for TI's DM814x platform
   - misc fixes and improvements for RockChip platforms
   - Marvell MVEBU suspend/resume support

  A few driver changes that ideally would belong in the drivers branch
  are also here (acked by appropriate maintainers):

   - power key input driver for Freescale platforms (svns)
   - RTC driver updates for Freescale platforms (svns/mxc)
   - clk fixes for TI DM814/816X

  + a bunch of other changes for various platforms"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: rockchip: pm: Fix PTR_ERR() argument
  ARM: imx: mach-imx6ul: Fix allmodconfig build
  clk: ti: fix for definition movement
  ARM: uniphier: drop v7_invalidate_l1 call at secondary entry
  memory: kill off set_irq_flags usage
  rtc: snvs: select option REGMAP_MMIO
  ARM: brcmstb: select ARCH_DMA_ADDR_T_64BIT for LPAE
  ARM: BCM: Enable ARM erratum 798181 for BRCMSTB
  ARM: OMAP2+: Fix power domain operations regression caused by 81xx
  ARM: rockchip: enable PMU_GPIOINT_WAKEUP_EN when entering shallow suspend
  ARM: rockchip: set correct stabilization thresholds in suspend
  ARM: rockchip: rename osc_switch_to_32k variable
  ARM: imx6ul: add fec MAC refrence clock and phy fixup init
  ARM: imx6ul: add fec bits to GPR syscon definition
  rtc: mxc: add support of device tree
  dt-binding: document the binding for mxc rtc
  rtc: mxc: use a second rtc clock
  ARM: davinci: cp_intc: use IRQCHIP_SKIP_SET_WAKE instead of irq_set_wake callback
  soc: mediatek: Fix SCPSYS compilation
  ARM: at91/soc: add basic support for new sama5d2 SoC
  ...
2015-09-01 12:18:40 -07:00
Linus Torvalds
c5fc249862 ARM: SoC cleanups for v4.3
A large cleanup branch this release, with a healthy 10k negative line delta.
 
 Most of this is removal of legacy (non-DT) support of shmobile
 platforms. There is also removal of two non-DT platforms on OMAP,
 and the plat-samsung directory is cleaned out by moving most of the
 previously shared-location-but-not-actually-shared files from there to
 the appropriate mach directories instead.
 
 There are other sets of changes in here as well:
 
  - Rob Herring removed use of set_irq_flags under all platforms and
    moved to genirq alternatives
  - A series of timer API conversions to set-state interface
  - ep93xx, nomadik and ux500 cleanups from Linus Walleij
  - __init annotation fixes from Nicolas Pitre
  + a bunch of other changes that all add up to a nice set of cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV16zRAAoJEIwa5zzehBx30OYQAIM2TaHWxDzcK0jOfrPEOyU0
 jhnT3B2/FbIpYbt3UwcDOqJacHzA/syU4UjplCcWWhKYtTucXQIjOxi0BgRq5V3X
 EFrgEbQMLXshhMGquBd4Nl6XhpRrlZcnnY4iFPGf7pR5jQfwQhZCiHEOXCLe4qlz
 m9GorKjEmiSk2ID/PFpyOUx20XiiqkU2MOCsNqNiGwFfmQfpVo0vXtKgxlL6d6q+
 9mrWFFTqgiOBMAU/X1j18U9jpFT6NOe8JcXp3F3tm4Cq5nJ2pTPZcaYWOORD0bGc
 7Os1HRTN9SMNsb8sSvQa1N/Fy2AAFuvGdg8q4oLzgtXJogInRmxE4oGLbffq0As/
 q81mEuWkdHjGPs5oyPNQdP2grYhflNP+M1+fA6QaUG/mDl5RFFcld9nfhCiBeIZW
 oHAHZhz7//BImpFsmNiXOew9fmQaHxQ6Jy0K4YvhqaxwQ0N54ZadUPH47wmmxW5E
 X5IY5Oo7xg3e4EU4/t1nFDTxMG936ZxLVtuq79dRHrl+AT6KVbzdUI4LLyrvEULh
 ETbWIZUAHvE9i2N8GbsfDzc9YlpG/c5SpN8T5dg2R0BQpgE192iG6s5XoGyu80MG
 MbtbEBml0y3tr36Bd9tCpsSrBjzZLUk5WRo6Rd/zWKlRkslV74iacKLvC7C5oa7n
 GYL4xUSPE1RhJxnXezp0
 =acy4
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "A large cleanup branch this release, with a healthy 10k negative line
  delta.

  Most of this is removal of legacy (non-DT) support of shmobile
  platforms.  There is also removal of two non-DT platforms on OMAP, and
  the plat-samsung directory is cleaned out by moving most of the
  previously shared-location-but-not-actually-shared files from there to
  the appropriate mach directories instead.

  There are other sets of changes in here as well:

   - Rob Herring removed use of set_irq_flags under all platforms and
     moved to genirq alternatives

   - a series of timer API conversions to set-state interface

   - ep93xx, nomadik and ux500 cleanups from Linus Walleij

   - __init annotation fixes from Nicolas Pitre

   + a bunch of other changes that all add up to a nice set of cleanups"

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (108 commits)
  ARM/fb: ep93xx: switch framebuffer to use modedb only
  ARM: gemini: Setup timer3 as free running timer
  ARM: gemini: Use timer1 for clockevent
  ARM: gemini: Add missing register definitions for gemini timer
  ARM: ep93xx/timer: Migrate to new 'set-state' interface
  ARM: nomadik: push accelerometer down to boards
  ARM: nomadik: move l2x0 setup to device tree
  ARM: nomadik: selectively enable UART0 on boards
  ARM: nomadik: move hog code to use DT hogs
  ARM: shmobile: Fix mismerges
  ARM: ux500: simplify secondary CPU boot
  ARM: SAMSUNG: remove keypad-core header in plat-samsung
  ARM: SAMSUNG: local watchdog-reset header in mach-s3c64xx
  ARM: SAMSUNG: local onenand-core header in mach-s3c64xx
  ARM: SAMSUNG: local irq-uart header in mach-s3c64xx
  ARM: SAMSUNG: local backlight header in mach-s3c64xx
  ARM: SAMSUNG: local ata-core header in mach-s3c64xx
  ARM: SAMSUNG: local regs-usb-hsotg-phy header in mach-s3c64xx
  ARM: SAMSUNG: local spi-core header in mach-s3c24xx
  ARM: SAMSUNG: local nand-core header in mach-s3c24xx
  ...
2015-09-01 12:10:20 -07:00
Franklin S Cooper Jr
1b0838b5a7 ARM: davinci: Set proper SPI prescale limit value
SPI Davinci driver has been updated to allow SOCs to specify their minimum
prescale value. Update the various SOCs board files that use this driver with
their proper prescaler limit.

Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-14 20:34:47 +01:00
Sudeep Holla
3f86e570f2 ARM: davinci: cp_intc: use IRQCHIP_SKIP_SET_WAKE instead of irq_set_wake callback
Commit 60f96b41f7 ("genirq: Add IRQCHIP_SKIP_SET_WAKE flag")
introduced a new flag to skip the irq_set_wake callback in the irqchip
core to avoid adding dummy irq_set_wake in the irqchip implementations.

This patch removes the dummy callback and sets the IRQCHIP_SKIP_SET_WAKE
flags.

Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-05 11:31:44 +02:00
Rob Herring
e8d36d5dbb ARM: kill off set_irq_flags usage
set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:

IRQF_VALID -> !IRQ_NOREQUEST
IRQF_PROBE -> !IRQ_NOPROBE
IRQF_NOAUTOEN -> IRQ_NOAUTOEN

For IRQs managed by an irqdomain, the irqdomain core code handles clearing
and setting IRQ_NOREQUEST already, so there is no need to do this in
.map() functions and we can simply remove the set_irq_flags calls. Some
users also modify IRQ_NOPROBE and this has been maintained although it
is not clear that is really needed. There appears to be a great deal of
blind copy and paste of this code.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Imre Kaloz <kaloz@openwrt.org>
Acked-by: Krzysztof Halasa <khalasa@piap.pl>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Roland Stigge <stigge@antcom.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28 13:58:13 +02:00
Nicolas Pitre
19c233b79d ARM: appropriate __init annotation for const data
Init data marked const should be annotated with __initconst for
correctness and not __initdata.  In some cases the array gathering
references to that data has to be marked const as well. This fixes
LTO builds that otherwise fail with section mismatch errors.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28 13:55:27 +02:00
Viresh Kumar
bc660a454f ARM/davinci/time: Migrate to new 'set-state' interface
Migrate davinci driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

We weren't doing anything in set_mode(RESUME) and so .tick_resume()
isn't implemented.

Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2015-07-17 08:22:48 +05:30
Linus Torvalds
c11d716218 ARM: SoC cleanups for v4.2
A relatively small setup of cleanups this time around, and similar to last time
 the bulk of it is removal of legacy board support:
 
 - OMAP: removal of legacy (non-DT) booting for several platforms
 - i.MX: remove some legacy board files
 
 Conflicts: None
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVi4RJAAoJEFk3GJrT+8ZlS78P/28n9U/KBoBkHWFhLmsgAUC/
 X06CfjxcFuRndLoj96jxhWdaf65GwFsDPCsWfI270X7kYlu08dn2AlLOOHxNf1Ou
 DvfqXz8dBl3z8pg0VHcZzUaV9CwfbvIHbalD2rLQ26sF6vRfHrF7AC+ITTi2TEpY
 CMX7LF1igX8nnRRZpl0Oya8Uvr8vsjuuvSq6I2GFav/JhZpYhz19FqbVPtu13Kuw
 +AZrwvgn5KwSxYw6cDjwWgbSBBuZi2m22LJxrs8z/ckRVA0ErpKLD83GZ5DeA+Ii
 m+f0xv/EE59AnfCnlpnZizxeQQ7BSVAZbaSp4GuXgLtg+1zJZP9tsJ8gLGuSLIo4
 TMMcB7K2VQMs4orAEvd0B7QB2WEtu4NDgKmD7k7tSy0uCMqxY/ItYDFVLpLRz9+r
 cnB469H312MJuk+7eH324n62lWhlQ8h1D2zHXMDCo4kvgZg/Qcbl6joj34B6oTqz
 Pa1RoJwrh4CsihDF/2aUt1IOZ+4mm0hhg4gocZEyqvf7Xdya2oFiyoUQCLnPQfbd
 Vvw7JMxnIW9iQbYzu4eHlZin3TK53osmIepj7pnlrmdLcM046fLONDxsg9JovsrS
 +TwHE00DZdAgpH/z1aUo8Ft4xO60FkPK2YcOCUvKZKi3mIHenvZZQo+s28suNni1
 Q1dz9aZWNvaunmRl4EcH
 =0zof
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Kevin Hilman:
 "A relatively small setup of cleanups this time around, and similar to
  last time the bulk of it is removal of legacy board support:

   - OMAP: removal of legacy (non-DT) booting for several platforms

   - i.MX: remove some legacy board files"

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits)
  ARM: fix EFM32 build breakage caused by cpu_resume_arm
  ARM: 8389/1: Add cpu_resume_arm() for firmwares that resume in ARM state
  ARM: v7 setup function should invalidate L1 cache
  mach-omap2: Remove use of deprecated marco, PTR_RET in devices.c
  ARM: OMAP2+: Remove calls to deprecacted marco,PTR_RET in the files,fb.c and pmu.c
  ARM: OMAP2+: Constify irq_domain_ops
  ARM: OMAP2+: use symbolic defines for console loglevels instead of numbers
  ARM: at91: remove useless Makefile.boot
  ARM: at91: remove at91rm9200_sdramc.h
  ARM: at91: remove mach/at91_ramc.h and mach/at91rm9200_mc.h
  ARM: at91/pm: use the atmel-mc syscon defines
  pcmcia: at91_cf: Use syscon to configure the MC/smc
  ARM: at91: declare the at91rm9200 memory controller as a syscon
  mfd: syscon: Add Atmel MC (Memory Controller) registers definition
  ARM: at91: drop sam9_smc.c
  ata: at91: use syscon to configure the smc
  ARM: ux500: delete static resource defines
  ARM: ux500: rename ux500_map_io
  ARM: ux500: look up PRCMU resource from DT
  ARM: ux500: kill off L2CC static map
  ...
2015-06-26 11:08:27 -07:00
Linus Torvalds
2ad7b44f5d Merge branch 'for-linus-clk' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull clkdev updates from Russell King:
 "This series addresses some breakage in clkdev caused by a previous
  patch set from the clk tree which introduced per-user clk structures.
  This basically renamed the existing 'struct clk' to 'struct clk_hw',
  and introduced a new 'struct clk'.

  This change will break anyone using clk_add_alias() with the common
  clk code enabled.  Thankfully, the intersection of users of
  clk_add_alias() and those using the common clk code is practically
  zero, but this is something which should be fixed to keep the code
  sane.

  The problem is that clk_add_alias() does this:

        r = clk_get(...);
        l = clkdev_alloc(r, ...);
        clk_put(...);

  which causes the alias to store a pointer to 'r', which has been
  freed.

  The original patch set tried to work around this problem incorrectly -
  at clk_get() time, it tried to convert the struct clk to a struct
  clk_hw, and then creating a new struct clk from that.  Clearly, if the
  original struct clk has been freed, then we have a use-after-free bug.

  We have other places in the tree which do something similar, so this
  series also addresses those locations too.

  This series addresses this problem by converting clkdev to store and
  use the clk_hw pointer.  This allows clk_get() to only have to create
  it's per-user struct clk from the clk_hw.  We can also get to the
  desired clk_hw at clk_add_alias() or clk lookup creation time, when
  the struct clk is "alive".

  We also perform some cleanups of the code:

   - replacing looped calls to clkdev_add() with clkdev_add_table()

   - replacing open-coded lookup allocation (which should have been
     using clkdev_alloc()) and subsequent clkdev_add() with
     clkdev_create()

   - replacing open-coded clk_add_alias() with clk_add_alias()"

* 'for-linus-clk' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  clk: s2mps11: use clkdev_create()
  ASoC: migor: use clkdev_create()
  ARM: omap2: use clkdev_add_alias()
  ARM: omap2: use clkdev_create()
  ARM: orion: use clkdev_create()
  ARM: lpc32xx: convert to use clkdev_add_table()
  SH: use clkdev_add_table()
  clkdev: add clkdev_create() helper
  clkdev: const-ify connection id to clk_add_alias()
  clkdev: get rid of redundant clk_add_alias() prototype in linux/clk.h
  clkdev: drop __init from clkdev_add_table()
  clk: update clk API documentation to clarify clk_round_rate()
  clkdev: use clk_hw internally
2015-06-23 15:50:46 -07:00
Russell King
6a53bc7500 ARM: Show proper respect for Heinrich Hertz by using the correct unit for frequency
The SI unit of frequency is Hertz, named after Heinrich Hertz, and is
given the symbol "Hz" to denote this.  "hz" is not the unit of frequency,
and is in fact meaningless.

Fix arch/arm to correctly use "Hz", thereby acknowledging Heinrich Hertz'
contribution to the modern world.

Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-05-14 16:22:05 +01:00
Rajendra Nayak
ea6f83346e arm: davinci: remove boilerplate code and use USE_PM_CLK_RUNTIME_OPS
USE_PM_CLK_RUNTIME_OPS is introduced so we don't repeat the same code
to do runtime_suspend and runtime_resume across users of PM clocks.
Use it to remove the boilerplate code.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-12 23:55:38 +02:00
Russell King
2d34e50729 clkdev: get rid of redundant clk_add_alias() prototype in linux/clk.h
clk_add_alias() is provided by clkdev, and is not part of the clk API.
Howver, it is prototyped in two locations: linux/clkdev.h and
linux/clk.h.  This is a mess.  Get rid of the redundant and unnecessary
version in linux/clk.h.

Acked-by: Tony Lindgren <tony@atomide.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-05-06 11:58:51 +01:00
Linus Torvalds
5c73cc4b6c ARM: DT updates for v4.1
As always, this tends to be one of our bigger branches. There are lots of
 updates this release, but not that many jumps out as something that needs
 more detailed coverage. Some of the highlights are:
 
 - DTs for the new Annapurna Labs Alpine platform
 - More graphics DT pieces falling into place on Exynos, bridges, clocks.
 - Plenty of DT updates for Qualcomm platforms for various IP blocks
 - Some churn on Tegra due to switch-over to tool-generated pinctrl data
 - Misc fixes and updates for Atmel at91 platforms
 - Various DT updates to add IP block support on Broadcom's Cygnus platforms
 - More updates for Renesas platforms as DT support is added for various IP
   blocks (IPMMU, display, audio, etc).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVNzKFAAoJEIwa5zzehBx3JtEP/1g89CW7iZHAUyIiC+jtgqck
 ASoplr13DLD0HWjjWITX3zm7J/iY57YjEv14tHH/xmrh5YCCZ+mRLqiD/Plnv0Zv
 JdJRRJv/NMnMlu/tA1aBO326JOt2Vw+3YngmYayDpoRzVifx2YTJLbu2difa+6rM
 vN6FpOE6U5jkvM16+gqxKxyx0tGIQz9cTn+9q2V1fDS++vZ2VvqfB5pTNul3BKAF
 OVCNFJ/EUE9EPMPbmgDjYmNE/POj64kF32n7NBEQz2Z+nwDNxDAecfF356hV7o5g
 JsFLNK+4c2QQqBL775xzCf5kK+n/V2cFEpDica+hU70AdWsjdAlUFrbOsWGUJLRi
 4Blrv8GRxEKeOCs8AFKYCM+z3zf2ais7JMteD2VW26ywCwpUt+QEZTUVHRHU3NYQ
 BMI7uyTGIH2GyLyS+Av3vikza8IbDIwlYuuDpXhCJSXXgKSnbzCrpjkhyGLccBJR
 k3qgUwPJVw9hP1qaaNgvb7p9oNhTP2yLl3fQ68WqI7QWIupW0/s12INhzFFgt6zU
 Nzcx010ku9yMeMMGtfiNgA3cMln+Ysfs1UIUOMQ36zP1PCtHJkZgwtZzTsBE4A04
 KqmiLL/+7qsconEhEanmDzTpeXiNzERnOKSSqVN7Fwp89GEFJLrWpHSXI+8SBTHC
 fB54LRTNYdlcoN0QshcT
 =wqhB
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Olof Johansson:
 "As always, this tends to be one of our bigger branches.  There are
  lots of updates this release, but not that many jumps out as something
  that needs more detailed coverage.  Some of the highlights are:

   - DTs for the new Annapurna Labs Alpine platform

   - more graphics DT pieces falling into place on Exynos, bridges,
     clocks.

   - plenty of DT updates for Qualcomm platforms for various IP blocks

   - some churn on Tegra due to switch-over to tool-generated pinctrl
     data

   - misc fixes and updates for Atmel at91 platforms

   - various DT updates to add IP block support on Broadcom's Cygnus
     platforms

   - more updates for Renesas platforms as DT support is added for
     various IP blocks (IPMMU, display, audio, etc)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (231 commits)
  ARM: dts: alpine: add internal pci
  Revert "ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135."
  ARM: mvebu: use 0xf1000000 as internal registers on Armada 370 DB
  ARM: dts: qcom: Add idle state device nodes for 8064
  ARM: dts: qcom: Add idle states device nodes for 8084
  ARM: dts: qcom: Add idle states device nodes for 8974/8074
  ARM: dts: qcom: Update power-controller device node for 8064 Krait CPUs
  ARM: dts: qcom: Add power-controller device node for 8084 Krait CPUs
  ARM: dts: qcom: Add power-controller device node for 8074 Krait CPUs
  devicetree: bindings: Document qcom,idle-states
  devicetree: bindings: Update qcom,saw2 node bindings
  dt-bindings: Add #defines for MSM8916 clocks and resets
  arm: dts: qcom: Add LPASS Audio HW to IPQ8064 device tree
  arm: dts: qcom: Add APQ8084 chipset SPMI PMIC's nodes
  arm: dts: qcom: Add 8x74 chipset SPMI PMIC's nodes
  arm: dts: qcom: Add SPMI PMIC Arbiter nodes for APQ8084 and MSM8974
  arm: dts: qcom: Add LCC nodes
  arm: dts: qcom: Add TCSR support for MSM8960
  arm: dts: qcom: Add TCSR support for MSM8660
  arm: dts: qcom: Add TCSR support for IPQ8064
  ...
2015-04-22 09:09:46 -07:00
Linus Torvalds
d0440c59f5 ARM: SoC cleanups for v4.1
We've got a fairly large cleanup branch this time. The bulk of this is removal
 of non-DT platforms of several flavors:
 
 - Atmel at91 platforms go full-DT, with removal of remaining board-file based
   support
 - OMAP removes legacy board files for three more platforms
 - Removal of non-DT mach-msm, newer Qualcomm platforms now live in mach-qcom
 - Freescale i.MX25 also removes non-DT platform support
 
 Most of the rest of the changes here are fallout from the above, i.e. for
 example removal of drivers that now lack platforms, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVNzI3AAoJEIwa5zzehBx3ePwQAJKb4Mf72/4iiKb4dbVcooQN
 EiZ84fwWiWD6Mww/3A76xVnz/b7JWmB3vwW0b4fcbvzubmOjnROBmZgCWeNy4ZTv
 dOZc3/9jK7OrlwvpFBeZykQwHcbz+550+m3WxmLft1oqH/7BA1k5aunwYtFB96ii
 5Owi4Cy9OmxEyALQAvzktFaJdI7J66LNb+i30r5zIZHlkVooeF3UyadndiswUP2o
 EBzCE8UPqRi5kV6FuwVyf4MZaV28FWoglTqdx9OxogcTnKNFT6RlHQ39q/iPu348
 Wkh4kOryVy7Rlab1K4wQRpBoOwkonKDV73u2H2ifRFj7V9ZAdjibK8pgKn3kjkba
 bJkwHIqlqtqqqjj2Hh93wl+8hKSypoLXO9tagPWYBiLtFXCH/+EVsihWYpAc/A5E
 pUS6hJrJyXKJouwwsXu6459zP0ieqhvpbQG72xs9PRimAfAdSTulSTzdI/dMh42Q
 pwYkmvh+ReY3Ll4MeCzu7+eCIY0qAKsor48W1ImuziwQhg2lZj16qWtA4YdPk3+O
 N8ckyaaFg663PAfsZgBx1qTgxw5v0ec2k68/iEVGS5mUJCgcWxFvR95chTDIxQXq
 ZmJ+SuMFyLB/2zVSiGU96L1PQTcUkxJJ8LVB3qNp6KlYT7qUSsgAU+qYveFlUh+p
 X8MVsSVh8n1MTNepsLij
 =BV8A
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "We've got a fairly large cleanup branch this time.  The bulk of this
  is removal of non-DT platforms of several flavors:

   - Atmel at91 platforms go full-DT, with removal of remaining
     board-file based support

   - OMAP removes legacy board files for three more platforms

   - removal of non-DT mach-msm, newer Qualcomm platforms now live in
     mach-qcom

   - Freescale i.MX25 also removes non-DT platform support"

Most of the rest of the changes here are fallout from the above, i.e. for
example removal of drivers that now lack platforms, etc.

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits)
  mmc: Remove msm_sdcc driver
  gpio: Remove gpio-msm-v1 driver
  ARM: Remove mach-msm and associated ARM architecture code
  ARM: shmobile: cpuidle: Remove the pointless default driver
  ARM: davinci: dm646x: Add interrupt resource for McASPs
  ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x
  ARM: davinci: dm646x: Clean up the McASP DMA resources
  ARM: davinci: devices-da8xx: Add support for McASP2 on da830
  ARM: davinci: devices-da8xx: Clean up and correct the McASP device creation
  ARM: davinci: devices-da8xx: Add interrupt resource to McASP structs
  ARM: davinci: devices-da8xx: Add resource name for the McASP DMA request
  ARM: OMAP2+: Remove legacy support for omap3 TouchBook
  ARM: OMAP3: Remove legacy support for devkit8000
  ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board
  ARM: shmobile: Consolidate the pm code for R-Car Gen2
  ARM: shmobile: r8a7791: Correct SYSCIER value
  ARM: shmobile: r8a7790: Correct SYSCIER value
  ARM: at91: remove old setup
  ARM: at91: sama5d4: remove useless map_io
  ARM: at91: sama5 use SoC detection infrastructure
  ...
2015-04-22 09:04:39 -07:00
Eliad Peller
83c3a7d4ac wlcore: remove wl12xx_platform_data
Now that we have wlcore device-tree bindings in place
(for both wl12xx and wl18xx), remove the legacy
wl12xx_platform_data struct, and move its members
into the platform device data (that is passed to wlcore)

Davinci 850 is the only platform that still set
the platform data in the legacy way (and doesn't
have DT bindings), so remove the relevant
code/Kconfig option from the board file (as suggested
by Sekhar Nori)

Since no one currently uses wlcore_spi, simply remove its
platform data support (DT bindings will have to be added
if someone actually needs it)

Signed-off-by: Luciano Coelho <luca@coelho.fi>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Tested-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-24 09:48:14 -07:00
Luciano Coelho
44486b48b0 wl12xx: use frequency instead of enumerations for pdata clocks
Instead of defining an enumeration with the FW specific values for the
different clock rates, use the actual frequency instead.  Also add a
boolean to specify whether the clock is XTAL or not.

Change all board files to reflect this.

Signed-off-by: Luciano Coelho <luca@coelho.fi>
[Eliad - small fixes, update board file changes]
Signed-off-by: Eliad Peller <eliad@wizery.com>
Tested-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-24 09:47:57 -07:00
Daniel Lezcano
eeebc3bb4d ARM: cpuidle: Remove duplicate header inclusion
The cpu_do_idle() function is always used by the cpuidle drivers.

That led to have each driver including cpuidle.h and proc-fns.h, they are
always paired. That makes a lot of duplicate headers inclusion. Instead of
including both in each .c file, move the proc-fns.h header inclusion in the
cpuidle.h header file directly, so we can save some line of code.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Kevin Hilman <khilman@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-03-23 18:03:11 +01:00
Luciano Coelho
6f921fab58 wlcore: set irq_trigger in board files instead of hiding behind a quirk
The platform_quirk element in the platform data was used
to change the way the IRQ is triggered.  When set,
the EDGE_IRQ quirk would change the irqflags used
and treat edge trigger differently from the rest.

Instead of hiding this irq flag setting behind the quirk,
have the board files set the irq_trigger explicitly.

This will allow us to use standard irq DT definitions
later on.

Signed-off-by: Luciano Coelho <luca@coelho.fi>
[Eliad - rebase, add irq_trigger field and pass it,
update board file changes]
Signed-off-by: Eliad Peller <eliad@wizery.com>
Tested-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-19 14:20:50 -07:00
Peter Ujfalusi
6cfdf55b77 ARM: davinci: dm646x: Add interrupt resource for McASPs
The interrupt can be used for error recovery.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2015-03-18 17:19:50 +05:30