commit fa4d0f1992a96f6d7c988ef423e3127e613f6ac9 upstream.
With the current implementation the following race can happen:
* blk_pre_runtime_suspend() calls blk_freeze_queue_start() and
blk_mq_unfreeze_queue().
* blk_queue_enter() calls blk_queue_pm_only() and that function returns
true.
* blk_queue_enter() calls blk_pm_request_resume() and that function does
not call pm_request_resume() because the queue runtime status is
RPM_ACTIVE.
* blk_pre_runtime_suspend() changes the queue status into RPM_SUSPENDING.
Fix this race by changing the queue runtime status into RPM_SUSPENDING
before switching q_usage_counter to atomic mode.
Link: https://lore.kernel.org/r/20201209052951.16136-2-bvanassche@acm.org
Fixes: 986d413b7c ("blk-mq: Enable support for runtime power management")
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Stanley Chu <stanley.chu@mediatek.com>
Co-developed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl/L/n0QHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgptxfD/9Dvasr1LIF9jTL5nU3iwwCAKVneI0VXsvn
x9xLv+3AlvyhKJSpDxjyYrrsNwo2r2Hay/3Yix079wMyDNcjuUeaDVscQ2Ed6WXI
slOhefyd4sgZf0kpB7TkwSrU1idoSEhOgcbZSiPLnlb071rYbJm5M6W15j9knUW0
HfomlryBgTX6b0et+YHvboTQ+31ZWTpZdMk9XEvQhCVynPOwU858rRKnFZUQSJ04
LGKXcA5xchxD8HVImwGv6QFTtFSzoyT3g68fEXEM9rPoEM8T0utVFPfF7o8L4Oui
nLxpBThwN18xwcc2iei8Fko2H6RgAmaD4cR4rgZaesa4QavPtT8N+JebMX47Tvhy
BBUbD/gRMPt1nO9ufPuLDyYBda2Ne5Z1DkBSIuYgZrreiOBdYGaJDbGIJ9uGwi+j
u4QvooSMoXb/7XGojxaJCjPDlNyhOb+fbZaOJDU49xQR3k01B6vteDnxGBlvbYHn
xuC82LTpTkWQT65ciaFAsW0L2lE6zlgkWWP3ahzH/qAg0HvODT9LDPNxvUpgZqUT
zoUHua3jAY2JBudUMLlacD+/ZS/T7krMl2XLSvyKaOIAyAlaluxK/uykQ+Z3sWgF
XGYQ/yv/4mQ1rTozqRFKndRPN++FCRzIwcHk8iBQCRlh8yLB/gVBr/Q6SgJrdnEj
WWwc1tRmwA==
=o4GN
-----END PGP SIGNATURE-----
Merge tag 'block-5.10-2020-12-05' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Single fix for an issue with chunk_sectors and stacked devices"
* tag 'block-5.10-2020-12-05' of git://git.kernel.dk/linux-block:
block: use gcd() to fix chunk_sectors limit stacking
Restores splitting in terms of varied per-target ti->max_io_len
rather than use block core's single stacked 'chunk_sectors' limit.
- Like DM crypt, update DM integrity to not use crypto drivers that
have CRYPTO_ALG_ALLOCATES_MEMORY set.
- Fix DM writecache target's argument parsing and status display.
- Remove needless BUG() from dm writecache's persistent_memory_claim()
- Remove old gcc workaround in DM cache target's block_div() for ARM
link errors now that gcc >= 4.9 is required.
- Fix RCU locking in dm_blk_report_zones and dm_dax_zero_page_range.
- Remove old, and now frowned upon, BUG_ON(in_interrupt()) in
dm_table_event().
- Remove invalid sparse annotations from dm_prepare_ioctl() and
dm_unprepare_ioctl().
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl/KonYTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWgSJCACNYEndubrROJZL+FOUQixzZQiOfphw
9Brb/XbdXWXIv7F+JV85E6olOqz7JjTGrO91uD5kwHEtVhDx5zT/GCm+5FoBrLa/
FuTphPRWNimZSU1umJe2AG9hOiDpPJJUe/wwj3QkBH2TeEHwBHblB8BkRFzxnP+p
0dGybrQBMtrH3GO65YG7qaASeBPl1+G3mVHfzViyhk1uoZL1y9pKbzPK60TkHcsa
VCGTPke5Ri3hvd85hmpDcXmyxjxZfCA8Jc/DrQ+DDEwakHoJFwlSzP7fqwHnpKHT
RDL4iOID54SViSGqzNcxlGtr/EHyN9Mom2d4Nnb0cgsRG4woCeJWJZMM
=+o1m
-----END PGP SIGNATURE-----
Merge tag 'for-5.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM's bio splitting changes that were made during v5.9. This
restores splitting in terms of varied per-target ti->max_io_len
rather than use block core's single stacked 'chunk_sectors' limit.
- Like DM crypt, update DM integrity to not use crypto drivers that
have CRYPTO_ALG_ALLOCATES_MEMORY set.
- Fix DM writecache target's argument parsing and status display.
- Remove needless BUG() from dm writecache's persistent_memory_claim()
- Remove old gcc workaround in DM cache target's block_div() for ARM
link errors now that gcc >= 4.9 is required.
- Fix RCU locking in dm_blk_report_zones and dm_dax_zero_page_range.
- Remove old, and now frowned upon, BUG_ON(in_interrupt()) in
dm_table_event().
- Remove invalid sparse annotations from dm_prepare_ioctl() and
dm_unprepare_ioctl().
* tag 'for-5.10/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: remove invalid sparse __acquires and __releases annotations
dm: fix double RCU unlock in dm_dax_zero_page_range() error path
dm: fix IO splitting
dm writecache: remove BUG() and fail gracefully instead
dm table: Remove BUG_ON(in_interrupt())
dm: fix bug with RCU locking in dm_blk_report_zones
Revert "dm cache: fix arm link errors with inline"
dm writecache: fix the maximum number of arguments
dm writecache: advance the number of arguments when reporting max_age
dm integrity: don't use drivers that have CRYPTO_ALG_ALLOCATES_MEMORY
Commit 882ec4e609 ("dm table: stack 'chunk_sectors' limit to account
for target-specific splitting") caused a couple regressions:
1) Using lcm_not_zero() when stacking chunk_sectors was a bug because
chunk_sectors must reflect the most limited of all devices in the
IO stack.
2) DM targets that set max_io_len but that do _not_ provide an
.iterate_devices method no longer had there IO split properly.
And commit 5091cdec56 ("dm: change max_io_len() to use
blk_max_size_offset()") also caused a regression where DM no longer
supported varied (per target) IO splitting. The implication being the
potential for severely reduced performance for IO stacks that use a DM
target like dm-cache to hide performance limitations of a slower
device (e.g. one that requires 4K IO splitting).
Coming full circle: Fix all these issues by discontinuing stacking
chunk_sectors up using ti->max_io_len in dm_calculate_queue_limits(),
add optional chunk_sectors override argument to blk_max_size_offset()
and update DM's max_io_len() to pass ti->max_io_len to its
blk_max_size_offset() call.
Passing in an optional chunk_sectors override to blk_max_size_offset()
allows for code reuse of block's centralized calculation for max IO
size based on provided offset and split boundary.
Fixes: 882ec4e609 ("dm table: stack 'chunk_sectors' limit to account for target-specific splitting")
Fixes: 5091cdec56 ("dm: change max_io_len() to use blk_max_size_offset()")
Cc: stable@vger.kernel.org
Reported-by: John Dorminy <jdorminy@redhat.com>
Reported-by: Bruce Johnston <bjohnsto@redhat.com>
Reported-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: John Dorminy <jdorminy@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
commit 22ada802ed ("block: use lcm_not_zero() when stacking
chunk_sectors") broke chunk_sectors limit stacking. chunk_sectors must
reflect the most limited of all devices in the IO stack.
Otherwise malformed IO may result. E.g.: prior to this fix,
->chunk_sectors = lcm_not_zero(8, 128) would result in
blk_max_size_offset() splitting IO at 128 sectors rather than the
required more restrictive 8 sectors.
And since commit 07d098e6bb ("block: allow 'chunk_sectors' to be
non-power-of-2") care must be taken to properly stack chunk_sectors to
be compatible with the possibility that a non-power-of-2 chunk_sectors
may be stacked. This is why gcd() is used instead of reverting back
to using min_not_zero().
Fixes: 22ada802ed ("block: use lcm_not_zero() when stacking chunk_sectors")
Fixes: 07d098e6bb ("block: allow 'chunk_sectors' to be non-power-of-2")
Reported-by: John Dorminy <jdorminy@redhat.com>
Reported-by: Bruce Johnston <bjohnsto@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: John Dorminy <jdorminy@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If there is only one keyslot, then blk_ksm_init() computes
slot_hashtable_size=1 and log_slot_ht_size=0. This causes
blk_ksm_find_keyslot() to crash later because it uses
hash_ptr(key, log_slot_ht_size) to find the hash bucket containing the
key, and hash_ptr() doesn't support the bits == 0 case.
Fix this by making the hash table always have at least 2 buckets.
Tested by running:
kvm-xfstests -c ext4 -g encrypt -m inlinecrypt \
-o blk-crypto-fallback.num_keyslots=1
Fixes: 1b26283970 ("block: Keyslot Manager for Inline Encryption")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
disk_get_part needs to be paired with a disk_put_part.
Cc: stable@vger.kernel.org
Fixes: ef45fe470e ("blk-cgroup: show global disk stats in root cgroup io.stat")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For avoiding use-after-free on flush request, we call its .end_io() from
both timeout code path and __blk_mq_end_request().
When flush request's ref doesn't drop to zero, it is still used, we
can't mark it as IDLE, so fix it by marking IDLE when its refcount drops
to zero really.
Fixes: 65ff5cd045 ("blk-mq: mark flush request as IDLE in flush_end_io()")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Cc: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Return if the function ended up sending an uevent or not.
Cc: stable@vger.kernel.org # v5.9
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mark flush request as IDLE in its .end_io(), aligning it with how normal
requests behave. The flush request stays in in-flight tags if we're not
using an IO scheduler, so we need to change its state into IDLE.
Otherwise, we will hang in blk_mq_tagset_wait_completed_request() during
error recovery because flush the request state is kept as COMPLETED.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Cc: Chao Leng <lengchao@huawei.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the bio's size reaches max_append_sectors, bio_add_hw_page returns
0 then __bio_iov_append_get_pages returns -EINVAL. This is an expected
result of building a small enough bio not to be split in the IO path.
However, iov_iter is not advanced in this case, causing the same pages
are filled for the bio again and again.
Fix the case by properly advancing the iov_iter for already processed
pages.
Fixes: 0512a75b98 ("block: Introduce REQ_OP_ZONE_APPEND")
Cc: stable@vger.kernel.org # 5.8+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Similarly to commit 457e490f2b ("blkcg: allocate struct blkcg_gq
outside request queue spinlock"), blkg_create can also trigger
occasional -ENOMEM failures at the radix insertion because any
allocation inside blkg_create has to be non-blocking, making it more
likely to fail. This causes trouble for userspace tools trying to
configure io weights who need to deal with this condition.
This patch reduces the occurrence of -ENOMEMs on this path by preloading
the radix tree element on a GFP_KERNEL context, such that we guarantee
the later non-blocking insertion won't fail.
A similar solution exists in blkcg_init_queue for the same situation.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=dFJi
-----END PGP SIGNATURE-----
Merge tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph
- rdma error handling fixes (Chao Leng)
- fc error handling and reconnect fixes (James Smart)
- fix the qid displace when tracing ioctl command (Keith Busch)
- don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni)
- fix MTDT for passthru (Logan Gunthorpe)
- blacklist Write Same on more devices (Kai-Heng Feng)
- fix an uninitialized work struct (zhenwei pi)"
- lightnvm out-of-bounds fix (Colin)
- SG allocation leak fix (Doug)
- rnbd fixes (Gioh, Guoqing, Jack)
- zone error translation fixes (Keith)
- kerneldoc markup fix (Mauro)
- zram lockdep fix (Peter)
- Kill unused io_context members (Yufen)
- NUMA memory allocation cleanup (Xianting)
- NBD config wakeup fix (Xiubo)
* tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block: (27 commits)
block: blk-mq: fix a kernel-doc markup
nvme-fc: shorten reconnect delay if possible for FC
nvme-fc: wait for queues to freeze before calling update_hr_hw_queues
nvme-fc: fix error loop in create_hw_io_queues
nvme-fc: fix io timeout to abort I/O
null_blk: use zone status for max active/open
nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru
nvmet: cleanup nvmet_passthru_map_sg()
nvmet: limit passthru MTDS by BIO_MAX_PAGES
nvmet: fix uninitialized work for zero kato
nvme-pci: disable Write Zeroes on Sandisk Skyhawk
nvme: use queuedata for nvme_req_qid
nvme-rdma: fix crash due to incorrect cqe
nvme-rdma: fix crash when connect rejected
block: remove unused members for io_context
blk-mq: remove the calling of local_memory_node()
zram: Fix __zram_bvec_{read,write}() locking order
skd_main: remove unused including <linux/version.h>
sgl_alloc_order: fix memory leak
lightnvm: fix out-of-bounds write to array devices->info[]
...
We don't need to check whether the node is memoryless numa node before
calling allocator interface. SLUB(and SLAB,SLOB) relies on the page
allocator to pick a node. Page allocator should deal with memoryless
nodes just fine. It has zonelists constructed for each possible nodes.
And it will automatically fall back into a node which is closest to the
requested node. As long as __GFP_THISNODE is not enforced of course.
The code comments of kmem_cache_alloc_node() of SLAB also showed this:
* Fallback to other node is possible if __GFP_THISNODE is not set.
blk-mq code doesn't set __GFP_THISNODE, so we can remove the calling
of local_memory_node().
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix this warning:
./block/bio.c:1098: WARNING: Inline emphasis start-string without end-string.
The thing is that *iter is not a valid markup.
That seems to be a typo:
*iter -> @iter
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Using "@bio's parent" causes the following waring:
./block/bio.c:10: WARNING: Inline emphasis start-string without end-string.
The main problem here is that this would be converted into:
**bio**'s parent
By kernel-doc, which is not a valid notation. It would be
possible to use, instead, this kernel-doc markup:
``bio's`` parent
Yet, here, is probably simpler to just use an altenative language:
the parent of @bio
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
fix bio splitting for bios that were deferred to the worker thread
due to a DM device being suspended.
- Remove DM core's special handling of NVMe devices now that block
core has internalized efficiencies drivers previously needed to
be concerned about (via now removed direct_make_request).
- Fix request-based DM to not bounce through indirect dm_submit_bio;
instead have block core make direct call to blk_mq_submit_bio().
- Various DM core cleanups to simplify and improve code.
- Update DM cryot to not use drivers that set
CRYPTO_ALG_ALLOCATES_MEMORY.
- Fix DM raid's raid1 and raid10 discard limits for the purposes of
linux-stable. But then remove DM raid's discard limits settings now
that MD raid can efficiently handle large discards.
- A couple small cleanups across various targets.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl+Fx1gTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWk5iB/9pONYmtfQ5oBx4jg/PU8cVYYIfOtwS
ZtItFbw7T9bkHVZ8d4hDr5LTq898cADuRD5edlR82gDOcXkiJlb5PqU39RoOTVvF
Xz87sWzHdGAK7rdnCMAc2hiX3oQOje9o7NxGeGQ/uPaNU+U/vJS0AZtEAwltocBd
j9MGESddBC636Gzbg5C0c0frikXd0am6qp6SCYJNpP5I0G2beHk2YX5Jqt9c7zMk
8kyQend5b5RvkPNWTAjkVfWUsIjwYHh6MF48ZoGvD0X3lWjIBiwyxC0UX5hSXq63
kB+nqxbXcvQLEBtJuDZ2bjyvrwzCVLpmfgLgzxOOU8fI5Q2U0zpsPaa0
=6YDu
-----END PGP SIGNATURE-----
Merge tag 'for-5.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Improve DM core's bio splitting to use blk_max_size_offset(). Also
fix bio splitting for bios that were deferred to the worker thread
due to a DM device being suspended.
- Remove DM core's special handling of NVMe devices now that block core
has internalized efficiencies drivers previously needed to be
concerned about (via now removed direct_make_request).
- Fix request-based DM to not bounce through indirect dm_submit_bio;
instead have block core make direct call to blk_mq_submit_bio().
- Various DM core cleanups to simplify and improve code.
- Update DM cryot to not use drivers that set
CRYPTO_ALG_ALLOCATES_MEMORY.
- Fix DM raid's raid1 and raid10 discard limits for the purposes of
linux-stable. But then remove DM raid's discard limits settings now
that MD raid can efficiently handle large discards.
- A couple small cleanups across various targets.
* tag 'for-5.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix request-based DM to not bounce through indirect dm_submit_bio
dm: remove special-casing of bio-based immutable singleton target on NVMe
dm: export dm_copy_name_and_uuid
dm: fix comment in __dm_suspend()
dm: fold dm_process_bio() into dm_submit_bio()
dm: fix missing imposition of queue_limits from dm_wq_work() thread
dm snap persistent: simplify area_io()
dm thin metadata: Remove unused local variable when create thin and snap
dm raid: remove unnecessary discard limits for raid10
dm raid: fix discard limits for raid1 and raid10
dm crypt: don't use drivers that have CRYPTO_ALG_ALLOCATES_MEMORY
dm: use dm_table_get_device_name() where appropriate in targets
dm table: make 'struct dm_table' definition accessible to all of DM core
dm: eliminate need for start_io_acct() forward declaration
dm: simplify __process_abnormal_io()
dm: push use of on-stack flush_bio down to __send_empty_flush()
dm: optimize max_io_len() by inlining max_io_len_target_boundary()
dm: push md->immutable_target optimization down to __process_bio()
dm: change max_io_len() to use blk_max_size_offset()
dm table: stack 'chunk_sectors' limit to account for target-specific splitting
A zoned device with limited resources to open or activate zones may
return an error when the host exceeds those limits. The same command may
be successful if retried later, but the host needs to wait for specific
zone states before it should expect a retry to succeed. Have the block
layer provide an appropriate status for these conditions so applications
can distinuguish this error for special handling.
Cc: linux-api@vger.kernel.org
Cc: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=xE9E
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Here are the driver updates for 5.10.
A few SCSI updates in here too, in coordination with Martin as they
depend on core block changes for the shared tag bitmap.
This contains:
- NVMe pull requests via Christoph:
- fix keep alive timer modification (Amit Engel)
- order the PCI ID list more sensibly (Andy Shevchenko)
- cleanup the open by controller helper (Chaitanya Kulkarni)
- use an xarray for the CSE log lookup (Chaitanya Kulkarni)
- support ZNS in nvmet passthrough mode (Chaitanya Kulkarni)
- fix nvme_ns_report_zones (Christoph Hellwig)
- add a sanity check to nvmet-fc (James Smart)
- fix interrupt allocation when too many polled queues are
specified (Jeffle Xu)
- small nvmet-tcp optimization (Mark Wunderlich)
- fix a controller refcount leak on init failure (Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni)
- major refactoring of the scanning code (Christoph Hellwig)
- MD updates via Song:
- Bug fixes in bitmap code, from Zhao Heming
- Fix a work queue check, from Guoqing Jiang
- Fix raid5 oops with reshape, from Song Liu
- Clean up unused code, from Jason Yan
- Discard improvements, from Xiao Ni
- raid5/6 page offset support, from Yufen Yu
- Shared tag bitmap for SCSI/hisi_sas/null_blk (John, Kashyap,
Hannes)
- null_blk open/active zone limit support (Niklas)
- Set of bcache updates (Coly, Dongsheng, Qinglang)"
* tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (78 commits)
md/raid5: fix oops during stripe resizing
md/bitmap: fix memory leak of temporary bitmap
md: fix the checking of wrong work queue
md/bitmap: md_bitmap_get_counter returns wrong blocks
md/bitmap: md_bitmap_read_sb uses wrong bitmap blocks
md/raid0: remove unused function is_io_in_chunk_boundary()
nvme-core: remove extra condition for vwc
nvme-core: remove extra variable
nvme: remove nvme_identify_ns_list
nvme: refactor nvme_validate_ns
nvme: move nvme_validate_ns
nvme: query namespace identifiers before adding the namespace
nvme: revalidate zone bitmaps in nvme_update_ns_info
nvme: remove nvme_update_formats
nvme: update the known admin effects
nvme: set the queue limits in nvme_update_ns_info
nvme: remove the 0 lba_shift check in nvme_update_ns_info
nvme: clean up the check for too large logic block sizes
nvme: freeze the queue over ->lba_shift updates
nvme: factor out a nvme_configure_metadata helper
...
-----BEGIN PGP SIGNATURE-----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=LzyE
-----END PGP SIGNATURE-----
Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Series of merge handling cleanups (Baolin, Christoph)
- Series of blk-throttle fixes and cleanups (Baolin)
- Series cleaning up BDI, seperating the block device from the
backing_dev_info (Christoph)
- Removal of bdget() as a generic API (Christoph)
- Removal of blkdev_get() as a generic API (Christoph)
- Cleanup of is-partition checks (Christoph)
- Series reworking disk revalidation (Christoph)
- Series cleaning up bio flags (Christoph)
- bio crypt fixes (Eric)
- IO stats inflight tweak (Gabriel)
- blk-mq tags fixes (Hannes)
- Buffer invalidation fixes (Jan)
- Allow soft limits for zone append (Johannes)
- Shared tag set improvements (John, Kashyap)
- Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel)
- DM no-wait support (Mike, Konstantin)
- Request allocation improvements (Ming)
- Allow md/dm/bcache to use IO stat helpers (Song)
- Series improving blk-iocost (Tejun)
- Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang,
Xianting, Yang, Yufen, yangerkun)
* tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits)
block: fix uapi blkzoned.h comments
blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue
blk-mq: get rid of the dead flush handle code path
block: get rid of unnecessary local variable
block: fix comment and add lockdep assert
blk-mq: use helper function to test hw stopped
block: use helper function to test queue register
block: remove redundant mq check
block: invoke blk_mq_exit_sched no matter whether have .exit_sched
percpu_ref: don't refer to ref->data if it isn't allocated
block: ratelimit handle_bad_sector() message
blk-throttle: Re-use the throtl_set_slice_end()
blk-throttle: Open code __throtl_de/enqueue_tg()
blk-throttle: Move service tree validation out of the throtl_rb_first()
blk-throttle: Move the list operation after list validation
blk-throttle: Fix IO hang for a corner case
blk-throttle: Avoid tracking latency if low limit is invalid
blk-throttle: Avoid getting the current time if tg->last_finish_time is 0
blk-throttle: Remove a meaningless parameter for throtl_downgrade_state()
block: Remove redundant 'return' statement
...
Pull compat iovec cleanups from Al Viro:
"Christoph's series around import_iovec() and compat variant thereof"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
security/keys: remove compat_keyctl_instantiate_key_iov
mm: remove compat_process_vm_{readv,writev}
fs: remove compat_sys_vmsplice
fs: remove the compat readv/writev syscalls
fs: remove various compat readv/writev helpers
iov_iter: transparently handle compat iovecs in import_iovec
iov_iter: refactor rw_copy_check_uvector and import_iovec
iov_iter: move rw_copy_check_uvector() into lib/iov_iter.c
compat.h: fix a spelling error in <linux/compat.h>
blk_exit_queue will free elevator_data, while blk_mq_run_work_fn
will access it. Move cancel of hctx->run_work to the front of
blk_exit_queue to avoid use-after-free.
Fixes: 1b97871b50 ("blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release")
Signed-off-by: Yang Yang <yang.yang@vivo.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After commit 923218f616 ("blk-mq: don't allocate driver tag upfront
for flush rq"), blk_mq_submit_bio() will call blk_insert_flush()
directly to handle flush request rather than blk_mq_sched_insert_request()
in the case of elevator.
Then, all flush request either have set RQF_FLUSH_SEQ flag when call
blk_mq_sched_insert_request(), or have inserted into hctx->dispatch.
So, remove the dead code path.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since whole elevator register is protectd by sysfs_lock, we
don't need extras 'has_elevator'. Just use q->elevator directly.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After commit b89f625e28 ("block: don't release queue's sysfs
lock during switching elevator"), whole elevator register and
unregister function are covered by sysfs_lock. So, remove wrong
comment and add lockdep assert.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have introduced helper function blk_mq_hctx_stopped() to test
BLK_MQ_S_STOPPED.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have defined common interface blk_queue_registered() to
test QUEUE_FLAG_REGISTERED. Just use it.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
elv_support_iosched() will check queue_is_mq() for us. So, remove
the redundant check to clean code.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We will register debugfs for scheduler no matter whether it have
defined callback funciton .exit_sched. So, blk_mq_exit_sched()
is always needed to unregister debugfs. Also, q->elevator should
be set as NULL after exiting scheduler.
For now, since all register scheduler have defined .exit_sched,
it will not cause any actual problem. But It will be more reasonable
to do this change.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=THH6
-----END PGP SIGNATURE-----
Merge tag 'block5.9-2020-10-08' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes that should go into this release:
- NVMe controller error path reference fix (Chaitanya)
- Fix regression with IBM partitions on non-dasd devices (Christoph)
- Fix a missing clear in the compat CDROM packet structure (Peilin)"
* tag 'block5.9-2020-10-08' of git://git.kernel.dk/linux-block:
partitions/ibm: fix non-DASD devices
nvme-core: put ctrl ref when module ref get fail
block/scsi-ioctl: Fix kernel-infoleak in scsi_put_cdrom_generic_arg()
syzbot is reporting unkillable task [1], for the caller is failing to
handle a corrupted filesystem image which attempts to access beyond
the end of the device. While we need to fix the caller, flooding the
console with handle_bad_sector() message is unlikely useful.
[1] https://syzkaller.appspot.com/bug?id=f1f49fb971d7a3e01bd8ab8cff2ff4572ccf3092
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The __throtl_de/enqueue_tg() functions are only be called by
throtl_de/enqueue_tg(), thus we can just open code them to
make code more readable.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The throtl_schedule_next_dispatch() will validate if the service queue
is empty before calling update_min_dispatch_time(), and the
update_min_dispatch_time() will call throtl_rb_first(), which will
validate service queue again.
Thus we can move the service queue validation out of the
throtl_rb_first() to remove the redundant validation in the fast path.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We should move the list operation after validation.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It can not scale up in throtl_adjusted_limit() if we set bps or iops is
1, which will cause IO hang when enable low limit. Thus we should treat
1 as a illegal value to avoid this issue.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The IO latency tracking is only for LOW limit, so we should add a
validation to avoid redundant latency tracking if the LOW limit
is not valid.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We only update the tg->last_finish_time when the low limitaion is
enabled, so we can move the tg->last_finish_time validation a little
forward to avoid getting the unnecessary current time stamp if the
the low limitation is not enabled.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The throtl_downgrade_state() is always used to change to LIMIT_LOW
limitation, thus remove the latter meaningless parameter which
indicates the limitation index.
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is unnecessary to force request-based DM to call into bio-based
dm_submit_bio (via indirect disk->fops->submit_bio) only to have it then
call blk_mq_submit_bio().
Fix this by establishing a request-based DM block_device_operations
(dm_rq_blk_dops, which doesn't have .submit_bio) and update
dm_setup_md_queue() to set md->disk->fops to it for
DM_TYPE_REQUEST_BASED.
Remove DM_TYPE_REQUEST_BASED conditional in dm_submit_bio and unexport
blk_mq_submit_bio.
Fixes: c62b37d96b ("block: move ->make_request_fn to struct block_device_operations")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Don't error out if the dasd_biodasdinfo symbol is not available.
Cc: stable@vger.kernel.org
Fixes: 26d7e28e38 ("s390/dasd: remove ioctl_by_bdev calls")
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
According to Documentation/block/stat.rst, inflight should not include
I/O requests that are in the queue but not yet dispatched to the device,
but blk-mq identifies as inflight any request that has a tag allocated,
which, for queues without elevator, happens at request allocation time
and before it is queued in the ctx (default case in blk_mq_submit_bio).
In addition, current behavior is different for queues with elevator from
queues without it, since for the former the driver tag is allocated at
dispatch time. A more precise approach would be to only consider
requests with state MQ_RQ_IN_FLIGHT.
This effectively reverts commit 6131837b1d ("blk-mq: count allocated
but not started requests in iostats inflight") to consolidate blk-mq
behavior with itself (elevator case) and with original documentation,
but it differs from the behavior used by the legacy path.
This version differs from v1 by using blk_mq_rq_state to access the
state attribute. Avoid using blk_mq_request_started, which was
suggested, since we don't want to include MQ_RQ_COMPLETE.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Cc: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move blk_mq_sched_try_merge to blk-merge.c, which allows to mark
a lot of the merge infrastructure static there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Also move the definition from the public blkdev.h to the private
block/blk.h header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Also move the definition from the public blkdev.h to the private
block/blk.h header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_crypt_set_ctx() assumes its gfp_mask argument always includes
__GFP_DIRECT_RECLAIM, so that the mempool_alloc() will always succeed.
For now this assumption is still fine, since no callers violate it.
Making bio_crypt_set_ctx() able to fail would add unneeded complexity.
However, if a caller didn't use __GFP_DIRECT_RECLAIM, it would be very
hard to notice the bug. Make it easier by adding a WARN_ON_ONCE().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Satya Tangirala <satyat@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_crypto_rq_bio_prep() assumes its gfp_mask argument always includes
__GFP_DIRECT_RECLAIM, so that the mempool_alloc() will always succeed.
However, blk_crypto_rq_bio_prep() might be called with GFP_ATOMIC via
setup_clone() in drivers/md/dm-rq.c.
This case isn't currently reachable with a bio that actually has an
encryption context. However, it's fragile to rely on this. Just make
blk_crypto_rq_bio_prep() able to fail.
Suggested-by: Satya Tangirala <satyat@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Satya Tangirala <satyat@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
