Commit Graph

512 Commits

Author SHA1 Message Date
Frederic Weisbecker
8e983ff9ac perf/hw_breakpoint: Pass arch breakpoint struct to arch_check_bp_in_kernelspace()
We can't pass the breakpoint directly on arch_check_bp_in_kernelspace()
anymore because its architecture internal datas (struct arch_hw_breakpoint)
are not yet filled by the time we call the function, and most
implementation need this backend to be up to date. So arrange the
function to take the probing struct instead.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joel Fernandes <joel.opensrc@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/1529981939-8231-3-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-26 09:07:54 +02:00
Linus Torvalds
050e9baa9d Kbuild: rename CC_STACKPROTECTOR[_STRONG] config variables
The changes to automatically test for working stack protector compiler
support in the Kconfig files removed the special STACKPROTECTOR_AUTO
option that picked the strongest stack protector that the compiler
supported.

That was all a nice cleanup - it makes no sense to have the AUTO case
now that the Kconfig phase can just determine the compiler support
directly.

HOWEVER.

It also meant that doing "make oldconfig" would now _disable_ the strong
stackprotector if you had AUTO enabled, because in a legacy config file,
the sane stack protector configuration would look like

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  # CONFIG_CC_STACKPROTECTOR_NONE is not set
  # CONFIG_CC_STACKPROTECTOR_REGULAR is not set
  # CONFIG_CC_STACKPROTECTOR_STRONG is not set
  CONFIG_CC_STACKPROTECTOR_AUTO=y

and when you ran this through "make oldconfig" with the Kbuild changes,
it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had
been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just
CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version
used to be disabled (because it was really enabled by AUTO), and would
disable it in the new config, resulting in:

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
  CONFIG_CC_STACKPROTECTOR=y
  # CONFIG_CC_STACKPROTECTOR_STRONG is not set
  CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

That's dangerously subtle - people could suddenly find themselves with
the weaker stack protector setup without even realizing.

The solution here is to just rename not just the old RECULAR stack
protector option, but also the strong one.  This does that by just
removing the CC_ prefix entirely for the user choices, because it really
is not about the compiler support (the compiler support now instead
automatially impacts _visibility_ of the options to users).

This results in "make oldconfig" actually asking the user for their
choice, so that we don't have any silent subtle security model changes.
The end result would generally look like this:

  CONFIG_HAVE_CC_STACKPROTECTOR=y
  CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
  CONFIG_STACKPROTECTOR=y
  CONFIG_STACKPROTECTOR_STRONG=y
  CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

where the "CC_" versions really are about internal compiler
infrastructure, not the user selections.

Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-14 12:21:18 +09:00
Linus Torvalds
3a3869f1c4 pci-v4.18-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlsZdg0UHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vwJOBAAsuuWsOdiJRRhQLU5WfEMFgzcL02R
 gsumqZkK7E8LOq0DPNMtcgv9O0KgYZyCiZyTMJ8N7sEYohg04lMz8mtYXOibjcwI
 p+nVMko8jQXV9FXwSMGVqigEaLLcrbtkbf/mPriD63DDnRMa/+/Jh15SwfLTydIH
 QRTJbIxkS3EiOauj5C8QY3UwzjlvV9mDilzM/x+MSK27k2HFU9Pw/3lIWHY716rr
 grPZTwBTfIT+QFZjwOm6iKzHjxRM830sofXARkcH4CgSNaTeq5UbtvAs293MHvc+
 v/v/1dfzUh00NxfZDWKHvTUMhjazeTeD9jEVS7T+HUcGzvwGxMSml6bBdznvwKCa
 46ynePOd1VcEBlMYYS+P4njRYBLWeUwt6/TzqR4yVwb0keQ6Yj3Y9H2UpzscYiCl
 O+0qz6RwyjKY0TpxfjoojgHn4U5ByI5fzVDJHbfr2MFTqqRNaabVrfl6xU4sVuhh
 OluT5ym+/dOCTI/wjlolnKNb0XThVre8e2Busr3TRvuwTMKMIWqJ9sXLovntdbqE
 furPD/UnuZHkjSFhQ1SQwYdWmsZI5qAq2C9haY8sEWsXEBEcBGLJ2BEleMxm8UsL
 KXuy4ER+R4M+sFtCkoWf3D4NTOBUdPHi4jyk6Ooo1idOwXCsASVvUjUEG5YcQC6R
 kpJ1VPTKK1XN64I=
 =aFAi
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

  - unify AER decoding for native and ACPI CPER sources (Alexandru
    Gagniuc)

  - add TLP header info to AER tracepoint (Thomas Tai)

  - add generic pcie_wait_for_link() interface (Oza Pawandeep)

  - handle AER ERR_FATAL by removing and re-enumerating devices, as
    Downstream Port Containment does (Oza Pawandeep)

  - factor out common code between AER and DPC recovery (Oza Pawandeep)

  - stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep)

  - share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep)

  - disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas)

  - respect platform ownership of LTR (Bjorn Helgaas)

  - clear interrupt status in top half to avoid interrupt storm (Oza
    Pawandeep)

  - neaten pci=earlydump output (Andy Shevchenko)

  - avoid errors when extended config space inaccessible (Gilles Buloz)

  - prevent sysfs disable of device while driver attached (Christoph
    Hellwig)

  - use core interface to report PCIe link properties in bnx2x, bnxt_en,
    cxgb4, ixgbe (Bjorn Helgaas)

  - remove unused pcie_get_minimum_link() (Bjorn Helgaas)

  - fix use-before-set error in ibmphp (Dan Carpenter)

  - fix pciehp timeouts caused by Command Completed errata (Bjorn
    Helgaas)

  - fix refcounting in pnv_php hotplug (Julia Lawall)

  - clear pciehp Presence Detect and Data Link Layer Status Changed on
    resume so we don't miss hotplug events (Mika Westerberg)

  - only request pciehp control if we support it, so platform can use
    ACPI hotplug otherwise (Mika Westerberg)

  - convert SHPC to be builtin only (Mika Westerberg)

  - request SHPC control via _OSC if we support it (Mika Westerberg)

  - simplify SHPC handoff from firmware (Mika Westerberg)

  - fix an SHPC quirk that mistakenly included *all* AMD bridges as well
    as devices from any vendor with device ID 0x7458 (Bjorn Helgaas)

  - assign a bus number even to non-native hotplug bridges to leave
    space for acpiphp additions, to fix a common Thunderbolt xHCI
    hot-add failure (Mika Westerberg)

  - keep acpiphp from scanning native hotplug bridges, to fix common
    Thunderbolt hot-add failures (Mika Westerberg)

  - improve "partially hidden behind bridge" messages from core (Mika
    Westerberg)

  - add macros for PCIe Link Control 2 register (Frederick Lawler)

  - replace IB/hfi1 custom macros with PCI core versions (Frederick
    Lawler)

  - remove dead microblaze and xtensa code (Bjorn Helgaas)

  - use dev_printk() when possible in xtensa and mips (Bjorn Helgaas)

  - remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn
    Helgaas)

  - add managed interface to get PCI host bridge resources from OF (Jan
    Kiszka)

  - add support for unbinding generic PCI host controller (Jan Kiszka)

  - fix memory leaks when unbinding generic PCI host controller (Jan
    Kiszka)

  - request legacy VGA framebuffer only for VGA devices to avoid false
    device conflicts (Bjorn Helgaas)

  - turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device()
    like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas)

  - add generic enable function for simple SR-IOV hardware (Alexander
    Duyck)

  - use generic SR-IOV enable for ena, nvme (Alexander Duyck)

  - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson)

  - add ACS quirk for Intel 300 series (Mika Westerberg)

  - enable register clock for Armada 7K/8K (Gregory CLEMENT)

  - reduce Keystone "link already up" log level (Fabio Estevam)

  - move private DT functions to drivers/pci/ (Rob Herring)

  - factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring)

  - add DesignWare support to the endpoint test driver (Gustavo
    Pimentel)

  - add DesignWare support for endpoint mode (Gustavo Pimentel)

  - use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and
    artpec6 (Gustavo Pimentel)

  - fix Qualcomm bitwise NOT issue (Dan Carpenter)

  - add Qualcomm runtime PM support (Srinivas Kandagatla)

  - fix DesignWare enumeration below bridges (Koen Vandeputte)

  - use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai)

  - add configfs entries for pci_epf_driver device IDs (Kishon Vijay
    Abraham I)

  - clean up pci_endpoint_test driver (Gustavo Pimentel)

  - update Layerscape maintainer email addresses (Minghuan Lian)

  - add COMPILE_TEST to improve build test coverage (Rob Herring)

  - fix Hyper-V bus registration failure caused by domain/serial number
    confusion (Sridhar Pitchai)

  - improve Hyper-V refcounting and coding style (Stephen Hemminger)

  - avoid potential Hyper-V hang waiting for a response that will never
    come (Dexuan Cui)

  - implement Mediatek chained IRQ handling (Honghui Zhang)

  - fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang)

  - add Mobiveil PCIe host controller driver (Subrahmanya Lingappa)

  - add Mobiveil MSI support (Subrahmanya Lingappa)

  - clean up clocks, MSI, IRQ mappings in R-Car probe failure paths
    (Marek Vasut)

  - poll more frequently (5us vs 5ms) while waiting for R-Car data link
    active (Marek Vasut)

  - use generic OF parsing interface in R-Car (Vladimir Zapolskiy)

  - add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov)

  - add R-Car gen3 PHY support (Sergei Shtylyov)

  - improve R-Car PHYRDY polling (Sergei Shtylyov)

  - clean up R-Car macros (Marek Vasut)

  - use runtime PM for R-Car controller clock (Dien Pham)

  - update arm64 defconfig for Rockchip (Shawn Lin)

  - refactor Rockchip code to facilitate both root port and endpoint
    mode (Shawn Lin)

  - add Rockchip endpoint mode driver (Shawn Lin)

  - support VMD "membar shadow" feature (Jon Derrick)

  - support VMD bus number offsets (Jon Derrick)

  - add VMD "no AER source ID" quirk for more device IDs (Jon Derrick)

  - remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig
    selections (Bjorn Helgaas)

  - clean up quirks.c organization and whitespace (Bjorn Helgaas)

* tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits)
  PCI/AER: Replace struct pcie_device with pci_dev
  PCI/AER: Remove unused parameters
  PCI: qcom: Include gpio/consumer.h
  PCI: Improve "partially hidden behind bridge" log message
  PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc
  PCI: Move resource distribution for single bridge outside loop
  PCI: Account for all bridges on bus when distributing bus numbers
  ACPI / hotplug / PCI: Drop unnecessary parentheses
  ACPI / hotplug / PCI: Mark stale PCI devices disconnected
  ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug
  PCI: hotplug: Add hotplug_is_native()
  PCI: shpchp: Add shpchp_is_native()
  PCI: shpchp: Fix AMD POGO identification
  PCI: mobiveil: Add MSI support
  PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver
  PCI/AER: Decode Error Source Requester ID
  PCI/AER: Remove aer_recover_work_func() forward declaration
  PCI/DPC: Use the generic pcie_do_fatal_recovery() path
  PCI/AER: Pass service type to pcie_do_fatal_recovery()
  PCI/DPC: Disable ERR_NONFATAL handling by DPC
  ...
2018-06-07 12:45:58 -07:00
Linus Torvalds
93e95fa574 Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo updates from Eric Biederman:
 "This set of changes close the known issues with setting si_code to an
  invalid value, and with not fully initializing struct siginfo. There
  remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64
  and x86 to get the code that generates siginfo into a simpler and more
  maintainable state. Most of that work involves refactoring the signal
  handling code and thus careful code review.

  Also not included is the work to shrink the in kernel version of
  struct siginfo. That depends on getting the number of places that
  directly manipulate struct siginfo under control, as it requires the
  introduction of struct kernel_siginfo for the in kernel things.

  Overall this set of changes looks like it is making good progress, and
  with a little luck I will be wrapping up the siginfo work next
  development cycle"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
  signal/sh: Stop gcc warning about an impossible case in do_divide_error
  signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions
  signal/um: More carefully relay signals in relay_signal.
  signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR}
  signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code
  signal/signalfd: Add support for SIGSYS
  signal/signalfd: Remove __put_user from signalfd_copyinfo
  signal/xtensa: Use force_sig_fault where appropriate
  signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
  signal/um: Use force_sig_fault where appropriate
  signal/sparc: Use force_sig_fault where appropriate
  signal/sparc: Use send_sig_fault where appropriate
  signal/sh: Use force_sig_fault where appropriate
  signal/s390: Use force_sig_fault where appropriate
  signal/riscv: Replace do_trap_siginfo with force_sig_fault
  signal/riscv: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_fault where appropriate
  signal/parisc: Use force_sig_mceerr where appropriate
  signal/openrisc: Use force_sig_fault where appropriate
  signal/nios2: Use force_sig_fault where appropriate
  ...
2018-06-04 15:23:48 -07:00
Bjorn Helgaas
78f7aada6d xtensa/PCI: Use dev_printk() when possible
Use the pci_info() and pci_err() wrappers for dev_printk() when possible.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-22 07:56:17 -05:00
Bjorn Helgaas
f242132bc4 xtensa/PCI: Make variables static
Make these variables static, since they're only used in this file:

  pci_ctrl_head
  pci_ctrl_tail

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-22 07:56:12 -05:00
Bjorn Helgaas
99efbb86de xtensa/PCI: Remove dead code
Remove the following unused functions:

  pcibios_enable_resources()
  pcibios_alloc_controller()
  pci_controller_num()

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-22 07:56:05 -05:00
Christoph Hellwig
15b28bbcd5 dma-debug: move initialization to common code
Most mainstream architectures are using 65536 entries, so lets stick to
that.  If someone is really desperate to override it that can still be
done through <asm/dma-mapping.h>, but I'd rather see a really good
rationale for that.

dma_debug_init is now called as a core_initcall, which for many
architectures means much earlier, and provides dma-debug functionality
earlier in the boot process.  This should be safe as it only relies
on the memory allocator already being available.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2018-05-08 13:02:42 +02:00
Eric W. Biederman
9181010565 signal/xtensa: Use force_sig_fault where appropriate
Filling in struct siginfo before calling force_sig_info a tedious and
error prone process, where once in a great while the wrong fields
are filled out, and siginfo has been inconsistently cleared.

Simplify this process by using the helper force_sig_fault.  Which
takes as a parameters all of the information it needs, ensures
all of the fiddly bits of filling in struct siginfo are done properly
and then calls force_sig_info.

In short about a 5 line reduction in code for every time force_sig_info
is called, which makes the calling function clearer.

Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: linux-xtensa@linux-xtensa.org
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 10:44:12 -05:00
Eric W. Biederman
7de712ccc0 signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
While working on changing this code to use force_sig_fault I
discovered that do_unaliged_user is sets si_signo to SIGBUS and passes
SIGSEGV to force_sig_info.  Which is just b0rked.

The code is reporting a SIGBUS error so replace the SIGSEGV with SIGBUS.

Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-xtensa@linux-xtensa.org
Cc: stable@vger.kernel.org
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Fixes: 5a0015d626 ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 3")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 10:44:11 -05:00
Eric W. Biederman
3eb0f5193b signal: Ensure every siginfo we send has all bits initialized
Call clear_siginfo to ensure every stack allocated siginfo is properly
initialized before being passed to the signal sending functions.

Note: It is not safe to depend on C initializers to initialize struct
siginfo on the stack because C is allowed to skip holes when
initializing a structure.

The initialization of struct siginfo in tracehook_report_syscall_exit
was moved from the helper user_single_step_siginfo into
tracehook_report_syscall_exit itself, to make it clear that the local
variable siginfo gets fully initialized.

In a few cases the scope of struct siginfo has been reduced to make it
clear that siginfo siginfo is not used on other paths in the function
in which it is declared.

Instances of using memset to initialize siginfo have been replaced
with calls clear_siginfo for clarity.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-25 10:40:51 -05:00
Linus Torvalds
3c0d551e02 pci-v4.17-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlrHeY8UHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vxhLRAAndV/0NDyWZU0eZNM6twri2SEFnF7
 E4ar+YthxDxxJG4TLJbIA12jc5NgHZy4WuttDa6Jb99KreBXIHJFlNi/V/tme6zf
 +yXUuxWae7wJzBiaay57VqLGSc80gt/LTgjLa1siwQqjTbO3wSXR6JJXNaE9FtQ4
 /jL61t8bD1Peb5cWTpt9p0hrnKI0/pHwASdReyFS4F/HDKdvpof7BxE/OU3HSxxA
 XKC2v6RjY4S93vkzvApDXQ+vhKquVRK7/ojyTXQUO/GIzcARprO7H4k62N4ar0x/
 qbXLkR8IMkwA8ecsNmcL92ftb/cXoHfd+wdK8WpijqzF4kW4SdteVWbIhUzI0gbr
 0gjDYIzjplvH3pZGv/qvx+8sFtAP95OdPjuAAW2qJ9TCVfmiS8naNFCvcxg87RhD
 gjyQD3If1X7F8wy309lhq7VNyRexTHgIMgTXHyFvuZMzn/Qe1huL2XCwDcEAg/OX
 AvU2iuSE5tWAh7gIUMF/aWi3uoeJUyyoru5ZR//gqdFfx9YxpSimO1UDXnpPi8SR
 Iz/jzHJc0aWGYdQ9l6HiSbJF3P/QQcWYs9igt0A7BRGB05SPdWCh7sSO70FJa8ME
 f4WID5/qEiaH26kiSRX4cUqpc8Amk8bT0DXw2OT57qy3JM0ZdV5ENQX11pSpr9hv
 uLEf0DU7AEmdvzQ=
 =T++R
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - move pci_uevent_ers() out of pci.h (Michael Ellerman)

 - skip ASPM common clock warning if BIOS already configured it (Sinan
   Kaya)

 - fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva)

 - remove last user of pci_get_bus_and_slot() and the function itself
   (Sinan Kaya)

 - add decoding for 16 GT/s link speed (Jay Fang)

 - add interfaces to get max link speed and width (Tal Gilboa)

 - add pcie_bandwidth_capable() to compute max supported link bandwidth
   (Tal Gilboa)

 - add pcie_bandwidth_available() to compute bandwidth available to
   device (Tal Gilboa)

 - add pcie_print_link_status() to log link speed and whether it's
   limited (Tal Gilboa)

 - use PCI core interfaces to report when device performance may be
   limited by its slot instead of doing it in each driver (Tal Gilboa)

 - fix possible cpqphp NULL pointer dereference (Shawn Lin)

 - rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI
   hotplug (Mika Westerberg)

 - add support for PCI I/O port space that's neither directly accessible
   via CPU in/out instructions nor directly mapped into CPU physical
   memory space. This is fairly intrusive and includes minor changes to
   interfaces used for I/O space on most platforms (Zhichang Yuan, John
   Garry)

 - add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan,
   John Garry)

 - use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas)

 - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr()
   (Shawn Lin)

 - report quirk timings with dev_info (Bjorn Helgaas)

 - report quirks that take longer than 10ms (Bjorn Helgaas)

 - add and use Altera Vendor ID (Johannes Thumshirn)

 - tidy Makefiles and comments (Bjorn Helgaas)

 - don't set up INTx if MSI or MSI-X is enabled to align cris, frv,
   ia64, and mn10300 with x86 (Bjorn Helgaas)

 - move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick
   Lawler)

 - merge pcieport_if.h into portdrv.h (Bjorn Helgaas)

 - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn
   Helgaas)

 - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas)

 - remove portdrv link order dependency (Bjorn Helgaas)

 - remove support for unused VC portdrv service (Bjorn Helgaas)

 - simplify portdrv feature permission checking (Bjorn Helgaas)

 - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn
   Helgaas)

 - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas)

 - use cached AER capability offset (Frederick Lawler)

 - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg)

 - rename pcie-dpc.c to dpc.c (Bjorn Helgaas)

 - use generic pci_mmap_resource_range() instead of powerpc and xtensa
   arch-specific versions (David Woodhouse)

 - support arbitrary PCI host bridge offsets on sparc (Yinghai Lu)

 - remove System and Video ROM reservations on sparc (Bjorn Helgaas)

 - probe for device reset support during enumeration instead of runtime
   (Bjorn Helgaas)

 - add ACS quirk for Ampere (née APM) root ports (Feng Kan)

 - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas
   Vincent-Cross)

 - protect device restore with device lock (Sinan Kaya)

 - handle failure of FLR gracefully (Sinan Kaya)

 - handle CRS (config retry status) after device resets (Sinan Kaya)

 - skip various config reads for SR-IOV VFs as an optimization
   (KarimAllah Ahmed)

 - consolidate VPD code in vpd.c (Bjorn Helgaas)

 - add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann)

 - add DT support for R-Car r8a7743 (Biju Das)

 - fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host
   bridge driver that causes a general protection fault (Dexuan Cui)

 - fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV
   (Dexuan Cui)

 - fix Hyper-V host bridge hang when ejecting a VF before setting up MSI
   (Dexuan Cui)

 - make several structures static (Fengguang Wu)

 - increase number of MSI IRQs supported by Synopsys DesignWare bridges
   from 32 to 256 (Gustavo Pimentel)

 - implemented multiplexed IRQ domain API and remove obsolete MSI IRQ
   API from DesignWare drivers (Gustavo Pimentel)

 - add Tegra power management support (Manikanta Maddireddy)

 - add Tegra loadable module support (Manikanta Maddireddy)

 - handle 64-bit BARs correctly in endpoint support (Niklas Cassel)

 - support optional regulator for HiSilicon STB (Shawn Guo)

 - use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla)

 - support power supplies for Qualcomm msm8996 (Srinivas Kandagatla)

* tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits)
  MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver
  HISI LPC: Add ACPI support
  ACPI / scan: Do not enumerate Indirect IO host children
  ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use
  HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings
  of: Add missing I/O range exception for indirect-IO devices
  PCI: Apply the new generic I/O management on PCI IO hosts
  PCI: Add fwnode handler as input param of pci_register_io_range()
  PCI: Remove __weak tag from pci_register_io_range()
  MAINTAINERS: Add missing /drivers/pci/cadence directory entry
  fm10k: Report PCIe link properties with pcie_print_link_status()
  net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth
  net/mlx5: Report PCIe link properties with pcie_print_link_status()
  net/mlx4_core: Report PCIe link properties with pcie_print_link_status()
  PCI: Add pcie_print_link_status() to log link speed and whether it's limited
  PCI: Add pcie_bandwidth_available() to compute bandwidth available to device
  misc: pci_endpoint_test: Handle 64-bit BARs properly
  PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly
  PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing
  PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar
  ...
2018-04-06 18:31:06 -07:00
Dominik Brodowski
9d5b7c956b mm: add ksys_fadvise64_64() helper; remove in-kernel call to sys_fadvise64_64()
Using the ksys_fadvise64_64() helper allows us to avoid the in-kernel
calls to the sys_fadvise64_64() syscall. The ksys_ prefix denotes that
this function is meant as a drop-in replacement for the syscall. In
particular, it uses the same calling convention as ksys_fadvise64_64().

Some compat stubs called sys_fadvise64(), which then just passed through
the arguments to sys_fadvise64_64(). Get rid of this indirection, and call
ksys_fadvise64_64() directly.

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:16:10 +02:00
David Woodhouse
46e15a2a71 xtensa/PCI: Use generic pci_mmap_resource_range()
Commit f719582435 ("PCI: Add pci_mmap_resource_range() and use it for
ARM64") added this generic function with the intent of using it everywhere
and ultimately killing the old arch-specific implementations.

Remove the xtensa-specific pci_mmap_page_range() and use the generic
pci_mmap_resource_range() instead.

Xtensa can mmap I/O port space, so supply the xtensa-specific
pci_iobar_pfn() required to make that work.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
2018-02-28 17:03:40 -06:00
Max Filippov
6137e41660 xtensa: support DMA buffers in high memory
If a DMA buffer is allocated in high memory and kernel mapping is
required use dma_common_contiguous_remap to map buffer to the vmalloc
region and dma_common_free_remap to unmap it.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-02-16 19:19:54 -08:00
Linus Torvalds
2bed26606b DeviceTree updates for 4.16:
- Convert to use memblock_virt_alloc in DT code which supports bootmem
   arches. With this we can remove the arch specific
   early_init_dt_alloc_memory_arch() functions.
 
 - Enable running the DT unittests on UML
 
 - Use SPDX license tags on DT files
 
 - Fix early FDT kconfig ifdef logic
 
 - Clean-up unittest Makefile
 
 - Fix function comment for of_irq_parse_raw
 
 - Add missing documentation for linux,initrd-{start,end} properties
 
 - Clean-up of binding examples using uppercase hex
 
 - Add trivial devices W83773G and Infineon TLV493D-A1B6
 
 - Add missing STM32 SoC bindings
 
 - Various small binding doc fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQItBAABCAAXBQJac0m3EBxyb2JoQGtlcm5lbC5vcmcACgkQ+vtdtY28YcOmXA/9
 G/ZySEtV2RnW/z8bckNnG98F9M/yxFwKARYb4HPDGr4C6fYy9IO3sQ25Gjn9GgQm
 RzcOk40P+3YQvkb5eyha6zYYxrBwKNHjRoJJWpCpNAolJrYRgPn7gB9GLxs15mc8
 F1EdSrdJDsNxxrc44T6hJ2xfU/sY5Q7E9xVAKD9pStmENUhzyLnPuyT4UrqAnCVC
 1tqBjYgmHWsQxzgO9tSM629xKxgBVLPjoOULN8vWTcN+5RFQSgB/MFv611SKXo2h
 cIDH7Hm61MBMvblGTtEkz1pi+mF62BOvaHJdYKdAF0i1HrjIyIEysHC6rKrlYsF1
 B39HY8D+kIPr39OCdn6dONDtrWkmPSc/MYfqLjFDPIwgNtgDRkv9kugEi39/LTKP
 htpcD9zctRQLuDJtW+1TyQvNtEHEPY2QhRjKb1SdD4xK/phMcEhc8+sW88jFygtP
 xlNb12FCCjw83k801oX1QHgWR8mQg0cj2hrJxrMIJ+Hrb23TvBdN+wtPc6WkKjol
 zqHZ9vFK4z8LIPR6jPLsz9vAIBHcXKVWgSGSf41MhTSZYTOznR7HG1wgTcq4XMld
 VpKdWKbRa3B/ZqP01eCHmBLIt/f0pcieoa7b20uIf2PjWQmzRkaX9A0yfWrYsV/V
 JQogXMCSe7zfZBxrLRx37UP7hqMEIgWeTN+Ek0a4dOI=
 =v6gj
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:

 - Convert to use memblock_virt_alloc in DT code which supports
   bootmem arches. With this we can remove the arch specific
   early_init_dt_alloc_memory_arch() functions.

 - Enable running the DT unittests on UML

 - Use SPDX license tags on DT files

 - Fix early FDT kconfig ifdef logic

 - Clean-up unittest Makefile

 - Fix function comment for of_irq_parse_raw

 - Add missing documentation for linux,initrd-{start,end} properties

 - Clean-up of binding examples using uppercase hex

 - Add trivial devices W83773G and Infineon TLV493D-A1B6

 - Add missing STM32 SoC bindings

 - Various small binding doc fixes

* tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (23 commits)
  xtensa: remove arch specific early DT functions
  x86: remove arch specific early_init_dt_alloc_memory_arch
  nios2: remove arch specific early_init_dt_alloc_memory_arch
  mips: remove arch specific early_init_dt_alloc_memory_arch
  metag: remove arch specific early DT functions
  cris: remove arch specific early DT functions
  libfdt: remove unnecessary include directive from <linux/libfdt.h>
  of: unittest: refactor Makefile
  of/fdt: use memblock_virt_alloc for early alloc
  of: Use SPDX license tag for DT files
  of/fdt: Fix #ifdef dependency of early flattree declarations
  dt-bindings: h8300 clocksource: correct spelling of pulse
  dt-bindings: imx6q-pcie: Add required property for i.MX6SX
  mmc: Don't reference Linux-specific OF_GPIO_ACTIVE_LOW flag in DT binding
  dt-bindings: Use lower case hex in unit-addresses
  dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000
  dt-bindings: Add Infineon TLV493D-A1B6
  dt-bindings: mailbox: ti,message-manager: Fix interrupt name error
  dt-bindings: chosen: Document linux,initrd-{start,end}
  dt-bindings: arm: document supported STM32 SoC family
  ...
2018-02-01 10:57:45 -08:00
Linus Torvalds
d4173023e6 Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo cleanups from Eric Biederman:
 "Long ago when 2.4 was just a testing release copy_siginfo_to_user was
  made to copy individual fields to userspace, possibly for efficiency
  and to ensure initialized values were not copied to userspace.

  Unfortunately the design was complex, it's assumptions unstated, and
  humans are fallible and so while it worked much of the time that
  design failed to ensure unitialized memory is not copied to userspace.

  This set of changes is part of a new design to clean up siginfo and
  simplify things, and hopefully make the siginfo handling robust enough
  that a simple inspection of the code can be made to ensure we don't
  copy any unitializied fields to userspace.

  The design is to unify struct siginfo and struct compat_siginfo into a
  single definition that is shared between all architectures so that
  anyone adding to the set of information shared with struct siginfo can
  see the whole picture. Hopefully ensuring all future si_code
  assignments are arch independent.

  The design is to unify copy_siginfo_to_user32 and
  copy_siginfo_from_user32 so that those function are complete and cope
  with all of the different cases documented in signinfo_layout. I don't
  think there was a single implementation of either of those functions
  that was complete and correct before my changes unified them.

  The design is to introduce a series of helpers including
  force_siginfo_fault that take the values that are needed in struct
  siginfo and build the siginfo structure for their callers. Ensuring
  struct siginfo is built correctly.

  The remaining work for 4.17 (unless someone thinks it is post -rc1
  material) is to push usage of those helpers down into the
  architectures so that architecture specific code will not need to deal
  with the fiddly work of intializing struct siginfo, and then when
  struct siginfo is guaranteed to be fully initialized change copy
  siginfo_to_user into a simple wrapper around copy_to_user.

  Further there is work in progress on the issues that have been
  documented requires arch specific knowledge to sort out.

  The changes below fix or at least document all of the issues that have
  been found with siginfo generation. Then proceed to unify struct
  siginfo the 32 bit helpers that copy siginfo to and from userspace,
  and generally clean up anything that is not arch specific with regards
  to siginfo generation.

  It is a lot but with the unification you can of siginfo you can
  already see the code reduction in the kernel"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits)
  signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr
  mm/memory_failure: Remove unused trapno from memory_failure
  signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed
  signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap
  signal: Helpers for faults with specialized siginfo layouts
  signal: Add send_sig_fault and force_sig_fault
  signal: Replace memset(info,...) with clear_siginfo for clarity
  signal: Don't use structure initializers for struct siginfo
  signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered
  ptrace: Use copy_siginfo in setsiginfo and getsiginfo
  signal: Unify and correct copy_siginfo_to_user32
  signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32
  signal: Unify and correct copy_siginfo_from_user32
  signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED
  signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h
  signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h
  signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h
  signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h
  signal/powerpc: Remove redefinition of NSIGTRAP on powerpc
  signal: Move addr_lsb into the _sigfault union for clarity
  ...
2018-01-30 14:18:52 -08:00
Rob Herring
3a6fbcb2e2 xtensa: remove arch specific early DT functions
Now that the DT core code handles bootmem arches, we can remove the xtensa
specific early_init_dt_alloc_memory_arch function. The common
early_init_dt_add_memory_arch can be used too now that xtensa switched to
memblock.

Cc: Chris Zankel <chris@zankel.net>
Cc: linux-xtensa@linux-xtensa.org
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-01-30 11:17:37 -06:00
Linus Torvalds
d0bd31dc5c Xtensa improvements for v4.16:
- add SSP support;
 - add KASAN support;
 - improvements to xtensa-specific assembly:
   - use ENTRY and ENDPROC consistently;
   - clean up and unify word alignment macros;
   - clean up and unify fixup marking;
   - use 'call' instead of 'callx' where possible;
 - various cleanups:
   - consiolidate kernel stack size related definitions;
   - replace #ifdef'fed/commented out debug printk statements with pr_debug;
   - use struct exc_table instead of flat array for exception handling data;
 - build kernel with -mtext-section-literals; simplify xtensa linker script;
 - fix futex_atomic_cmpxchg_inatomic.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJab2d0AAoJEFH5zJH4P6BEhLsP/1BiSyRvNhI5TGaPyK2mV20S
 oQFx6qC3IRZ9KiDQhOciF23kqtxqT4GxnPtBs2B+grDEZDIYPsSoznPLsoPW48z+
 DXSZ5om2fHZX78pGnLmXTeWWzczhqP3pb5ce4a+QG6o7NcHan1ELhkxLzBCdWpPh
 jQHfeTt58Ux0qjRN2DPvnT9nQ/JyXN5A1L4zCKo0aPEgpxQ2wOyicdd8wkDZ9l5E
 USwCxh+Vp0dbjg62DCUIWdz9gsqI6SjVXvGZC5DWrnPXVnOFV6AOcW31/fu+bmZf
 Z7TEALXtasQK0MMih9VHAs185AClWdG4OXuFV6v6mkwPEcJTm86st/dMy8vPtKvN
 HQifFb/aSfh2aEk8BeB2DJVuwcoKDxWIn9DJXRkt2TEhICBwVUvVuvFVCDyFpbig
 etZHm86eOkRtma2Ksy8hFJ4/6Dq+PO1CqNFCpK3XFO9zaaua263mmquPAgDotzf+
 VaOlaP2Q43a4lndcdgVQBb6VwqPFCmsVMBzQT4+fAw3Ze0R/RPe+StqjH6067Oxv
 fQeHfTAknDsOQYPTQ88G7WDy2cnza/YuCgzipBzlDGCt8j7U5HKsPfmkFZKsqpix
 Jhp1A9fMzessSX9vrPsz2nUuKI0S4jlwEEPy1JcGw89Hl4srNL2cwd3Kc3jy4Sn4
 QAjzyFj+rcjZxqflvB8b
 =8IkM
 -----END PGP SIGNATURE-----

Merge tag 'xtensa-20180129' of git://github.com/jcmvbkbc/linux-xtensa

Pull Xtensa updates from Max Filippov:

 - add SSP support

 - add KASAN support

 - improvements to xtensa-specific assembly:
    - use ENTRY and ENDPROC consistently
    - clean up and unify word alignment macros
    - clean up and unify fixup marking
    - use 'call' instead of 'callx' where possible

 - various cleanups:
    - consiolidate kernel stack size related definitions
    - replace #ifdef'fed/commented out debug printk statements with
      pr_debug
    - use struct exc_table instead of flat array for exception handling
      data

 - build kernel with -mtext-section-literals; simplify xtensa linker
   script

 - fix futex_atomic_cmpxchg_inatomic()

* tag 'xtensa-20180129' of git://github.com/jcmvbkbc/linux-xtensa: (21 commits)
  xtensa: fix futex_atomic_cmpxchg_inatomic
  xtensa: shut up gcc-8 warnings
  xtensa: print kernel sections info in mem_init
  xtensa: use generic strncpy_from_user with KASAN
  xtensa: use __memset in __xtensa_clear_user
  xtensa: add support for KASAN
  xtensa: move fixmap and kmap just above the KSEG
  xtensa: don't clear swapper_pg_dir in paging_init
  xtensa: extract init_kio
  xtensa: implement early_trap_init
  xtensa: clean up exception handling structure
  xtensa: clean up custom-controlled debug output
  xtensa: enable stack protector
  xtensa: print hardware config ID on startup
  xtensa: consolidate kernel stack size related definitions
  xtensa: clean up functions in assembly code
  xtensa: clean up word alignment macros in assembly code
  xtensa: clean up fixups in assembly code
  xtensa: use call instead of callx in assembly code
  xtensa: build kernel with text-section-literals
  ...
2018-01-29 16:40:28 -08:00
Eric W. Biederman
f71dd7dc2d signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed
There are so many places that build struct siginfo by hand that at
least one of them is bound to get it wrong.  A handful of cases in the
kernel arguably did just that when using the errno field of siginfo to
pass no errno values to userspace.  The usage is limited to a single
si_code so at least does not mess up anything else.

Encapsulate this questionable pattern in a helper function so
that the userspace ABI is preserved.

Update all of the places that use this pattern to use the new helper
function.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-01-22 19:07:11 -06:00
Max Filippov
57358ba956 xtensa: use generic strncpy_from_user with KASAN
This enables KASAN check of the destination buffer.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-17 15:34:57 -08:00
Max Filippov
c633544a61 xtensa: add support for KASAN
Cover kernel addresses above 0x90000000 by the shadow map. Enable
HAVE_ARCH_KASAN when MMU is enabled. Provide kasan_early_init that fills
shadow map with writable copies of kasan_zero_page. Call
kasan_early_init right after mmu initialization in the setup_arch.
Provide kasan_init that allocates proper shadow map pages from the
memblock and puts these pages into the shadow map for addresses from
VMALLOC area to the end of KSEG. Call kasan_init right after memblock
initialization. Don't use KASAN for the boot code, MMU and KASAN
initialization and page fault handler. Make kernel stack size 4 times
larger when KASAN is enabled to avoid stack overflows.
GCC 7.3, 8 or newer is required to build the xtensa kernel with KASAN.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-16 22:37:12 -08:00
Max Filippov
c2edb35ae3 xtensa: extract init_kio
KIO region placement may be specified in the device tree, that's why
it's initialized with the rest of MMU after the early_init_devtree. In
order to support KASAN the MMU must be initialized earlier.
Separate KIO initialization from the rest of MMU initialization.
Reinitialize KIO if its location is specified in the device tree.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-16 22:37:10 -08:00
Max Filippov
f21a79cab3 xtensa: clean up exception handling structure
Instead of using flat array of longs use normal C structure and generate
EXC_TABLE_* constants in the asm-offsets.c

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-16 22:37:09 -08:00
Max Filippov
c130d3be84 xtensa: clean up custom-controlled debug output
Replace #ifdef'fed/commented out debug printk statements with pr_debug.
Replace printk statements with pr_* equivalents.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-16 22:37:08 -08:00
Max Filippov
40d1a07b33 xtensa: enable stack protector
The implementation is adopted from the ARM arch. GCC 7.3, 8 or newer is
required for building the xtensa kernel with SSP.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-16 22:37:07 -08:00
Max Filippov
aa6476f76c xtensa: print hardware config ID on startup
Print hardware config ID on startup and config ID recorded in the
configuration if it doesn't match one read from the hardware.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-10 16:19:28 -08:00
Max Filippov
fbb871e220 xtensa: clean up word alignment macros in assembly code
Remove duplicate definitions of ALIGN/src_b/__src_b and SSA8/ssa8/__ssa8
from assembly sources and put single definition into asm/asmmacro.h

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-10 14:48:53 -08:00
Max Filippov
0013aceb30 xtensa: clean up fixups in assembly code
Remove duplicate definitions of EX() and similar TRY/CATCH and SRC/DST
macros from assembly sources and put single definition into asm/asmmacro.h

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-10 14:48:53 -08:00
Max Filippov
2da03d4114 xtensa: use call instead of callx in assembly code
Now that xtensa assembly sources are compiled with -mlongcalls let the
assembler and linker relax call instructions into l32r + callx where
needed. This change makes the code cleaner and potentially a bit faster.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-10 14:48:52 -08:00
Max Filippov
f8f02ca73c xtensa: build kernel with text-section-literals
vmlinux.lds.S doesn't do anything special with literals, so instead of
keeping them separate put them into the corresponding text sections.
Drop explicit .literal sections from the vmlinux.lds.S, use standard
section macros. Mark literal pool locations in the assembly sources.
Unfortunately assembler doesn't put literals into .init sections and
external libgcc may still have .literal sections, so sed transformation
to the linker script is still needed.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-10 14:48:51 -08:00
Linus Torvalds
e37e0ee019 A couple of dma-mapping updates:
- turn dma_cache_sync into a dma_map_ops instance and remove
    implementation that purely are dead because the architecture
    doesn't support noncoherent allocations
  - add a flag for busses that need DMA configuration (Robin Murphy)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAloLSrYLHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYOMuQ//XXD94uNPYavrgXzGsAtg+I+LEm+xyk4T0dX5fxfj
 amXX49MHoGemjsBgzJlkQMMFqwDEdkKyEuFnEuy6OeowYCyD6zW0MJ3MwP9OosNJ
 PNTdGZIfSvxPYEW8cR9AdK3iQ2loMBZnYhd+O/oVjSugULLW2DNa7r2VRktcCKoh
 8Ob/8gL6Y9xEYJBRszhrBwKTa/hU8IThxxozBFzN7I3LIKyFboSTcwXGLAHow43g
 4anCTjWTaDcoU2JwY6UTRKRRTV+gD0ZRcsZfd8lNNb5rtMVZkBVOHbF14SMAmw1r
 kSgRcU3+WIFPhK/8wBYqtGZZGnOgFBTHVeqow3AdS728pBWlWl8niTK0DiIgCd3m
 qzScF6SqfN1bCZkZAy8FUV2l0DPYKS6lvyNkf00Eb2W/f6LEqAcjCi2QDDxRfaw+
 Vm97nPUiM+uXNy/6KtAy6ChdprSqx12/edXPp7Y3H2rS/+Dmr6exeix+wb7QUN8W
 JI7ZRHo4JLaJZk/XrZtGX/6jnN1Jo7vfApQOmYDY7kE1iGtOU/LQQj8gcZRVQxML
 4soN6ivSmZX2k03LabWHpYQ8QiyCSYChLC+Az7rQH47LDLeu1IdTJu6orpXpaxyo
 ymzEWlHbmF7mE66X4g/Up/eAYk2YLUA3rKLGVjAIaWDBzHftSFg5EaAnqMADC1G2
 hSo=
 =ALJf
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - turn dma_cache_sync into a dma_map_ops instance and remove
   implementation that purely are dead because the architecture doesn't
   support noncoherent allocations

 - add a flag for busses that need DMA configuration (Robin Murphy)

* tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: turn dma_cache_sync into a dma_map_ops method
  sh: make dma_cache_sync a no-op
  xtensa: make dma_cache_sync a no-op
  unicore32: make dma_cache_sync a no-op
  powerpc: make dma_cache_sync a no-op
  mn10300: make dma_cache_sync a no-op
  microblaze: make dma_cache_sync a no-op
  ia64: make dma_cache_sync a no-op
  frv: make dma_cache_sync a no-op
  x86: make dma_cache_sync a no-op
  floppy: consolidate the dummy fd_cacheflush definition
  drivers: flag buses which demand DMA configuration
2017-11-14 16:54:12 -08:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Christoph Hellwig
d708e71ed7 xtensa: make dma_cache_sync a no-op
xtensa does not implement DMA_ATTR_NON_CONSISTENT allocations, so it
doesn't make any sense to do any work in dma_cache_sync given that it
must be a no-op when dma_alloc_attrs returns coherent memory.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2017-10-19 16:37:40 +02:00
Masami Hiramatsu
1824436262 xtensa: Mark _stext and _end as char-arrays, not single char variables
Mark _stext and _end as character arrays instead of single
character variables, like include/asm-generic/sections.h does.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David S . Miller <davem@davemloft.net>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: linux-arch@vger.kernel.org
Cc: linux-cris-kernel@axis.com
Cc: mathieu.desnoyers@efficios.com
Link: http://lkml.kernel.org/r/150172775958.27216.12951305461398200544.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-10 16:28:52 +02:00
Max Filippov
7f81e55c73 xtensa: don't limit csum_partial export by CONFIG_NET
csum_partial and csum_partial_copy_generic are defined unconditionally
and are available even when CONFIG_NET is disabled. They are used not
only by the network drivers, but also by scsi and media.
Don't limit these functions export by CONFIG_NET.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-08-01 11:17:30 -07:00
Thomas Gleixner
f0cd9ae5d0 Merge branch 'timers/urgent' into timers/core
Pick up dependent changes.
2017-06-21 09:07:52 +02:00
Hugh Dickins
1be7107fbe mm: larger stack guard gap, between vmas
Stack guard page is a useful feature to reduce a risk of stack smashing
into a different mapping. We have been using a single page gap which
is sufficient to prevent having stack adjacent to a different mapping.
But this seems to be insufficient in the light of the stack usage in
userspace. E.g. glibc uses as large as 64kB alloca() in many commonly
used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX]
which is 256kB or stack strings with MAX_ARG_STRLEN.

This will become especially dangerous for suid binaries and the default
no limit for the stack size limit because those applications can be
tricked to consume a large portion of the stack and a single glibc call
could jump over the guard page. These attacks are not theoretical,
unfortunatelly.

Make those attacks less probable by increasing the stack guard gap
to 1MB (on systems with 4k pages; but make it depend on the page size
because systems with larger base pages might cap stack allocations in
the PAGE_SIZE units) which should cover larger alloca() and VLA stack
allocations. It is obviously not a full fix because the problem is
somehow inherent, but it should reduce attack space a lot.

One could argue that the gap size should be configurable from userspace,
but that can be done later when somebody finds that the new 1MB is wrong
for some special case applications.  For now, add a kernel command line
option (stack_guard_gap) to specify the stack gap size (in page units).

Implementation wise, first delete all the old code for stack guard page:
because although we could get away with accounting one extra page in a
stack vma, accounting a larger gap can break userspace - case in point,
a program run with "ulimit -S -v 20000" failed when the 1MB gap was
counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK
and strict non-overcommit mode.

Instead of keeping gap inside the stack vma, maintain the stack guard
gap as a gap between vmas: using vm_start_gap() in place of vm_start
(or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few
places which need to respect the gap - mainly arch_get_unmapped_area(),
and and the vma tree's subtree_gap support for that.

Original-patch-by: Oleg Nesterov <oleg@redhat.com>
Original-patch-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-19 21:50:20 +08:00
Daniel Lezcano
ba5d08c0ea clocksource/drivers: Rename clocksource_probe to timer_probe
The function name is now renamed to 'timer_probe' for consistency with
the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-14 11:59:16 +02:00
Linus Torvalds
63f700aab4 Xtensa fixes for v4.12-rc6
- don't use linux IRQ #0 in legacy irq domains: fixes timer interrupt
   assignment when it's hardware IRQ # is 0 and the kernel is built w/o
   device tree support;
 - reduce reservation size for double exception vector literals from 48
   to 20 bytes: fixes build on cores with small user exception vector;
 - cleanups: use kmalloc_array instead of kmalloc in simdisk_init and
   seq_puts instead of seq_printf in c_show.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZPwZjAAoJEFH5zJH4P6BEFxIP/25rNFHjeJFcUevm6JNR9kz2
 BThpznk0a8I0Nm1PBk6345YfYyC8DOsbR7rClwjjmZePc1ZUfFJU0TFdHlot1scQ
 MASib9qeWToG/kl/JlcC88CJn2uFgbzLXNlVzYpdOAqvYY6sfthf9b0tgdWnByUb
 WLbdg+MN5B+qfhZzNpsKZHHHPv26QV6iwre3ojUk2KgTgGoLHOYo5bcvmr09id0Y
 nWplIteG6RggUxIEghzvB/Uk2pDyYuAjku/dJtFcCShER172v9d6XE8FqV3naTjy
 Boo310fZhLgo93jEUTAjLZHT45vYxstggVRGzRnSiXE+QIqigIxQ76rbqbk8jwWG
 AhQvlNY+XxALYGyQ9SEGcX5JQC9XmjSuuVO8L3I7JeK3MNoH8FkdCrGRoJs2pwJr
 CXBkbvHkSYgaWfStAInFS0Jga8FJ4lCAxKsnVgchB/WoYmqcI9tqGsXnjPa+zOqR
 b9RY6lKeqfVxda1NRQo6TGu03lCFrqHcQZ5fwYPy8oxZfVL3DjQha1E4JZ68GiFI
 E7sEX0W6IIJozHCWruh4acZN/q25OzSnliI0UvPQpPUbPAbI834ouiPXuiJRJNv1
 CffCb2aYFFar4JBEg5t3w87fBUrEe6HDvjVXwwDGqH6HM8kiQyqftMvQ38lQ8g8b
 X3W4SYmFxiqmEaEAvlnr
 =5lPB
 -----END PGP SIGNATURE-----

Merge tag 'xtensa-20170612' of git://github.com/jcmvbkbc/linux-xtensa

Pull Xtensa fixes from Max Filippov:

 - don't use linux IRQ #0 in legacy irq domains: fixes timer interrupt
   assignment when it's hardware IRQ # is 0 and the kernel is built w/o
   device tree support

 - reduce reservation size for double exception vector literals from 48
   to 20 bytes: fixes build on cores with small user exception vector

 - cleanups: use kmalloc_array instead of kmalloc in simdisk_init and
   seq_puts instead of seq_printf in c_show.

* tag 'xtensa-20170612' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: don't use linux IRQ #0
  xtensa: reduce double exception literal reservation
  xtensa: ISS: Use kmalloc_array() in simdisk_init()
  xtensa: Use seq_puts() in c_show()
2017-06-13 15:09:10 +09:00
Max Filippov
e5c86679d5 xtensa: don't use linux IRQ #0
Linux IRQ #0 is reserved for error reporting and may not be used.
Increase NR_IRQS for one additional slot and increase
irq_domain_add_legacy parameter first_irq value to 1, so that linux
IRQ #0 is not associated with hardware IRQ #0 in legacy IRQ domains.
Introduce macro XTENSA_PIC_LINUX_IRQ for static translation of xtensa
PIC hardware IRQ # to linux IRQ #. Use this macro in XTFPGA platform
data definitions.

This fixes inability to use hardware IRQ #0 in configurations that don't
use device tree and allows for non-identity mapping between linux IRQ #
and hardware IRQ #.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-06-05 16:53:10 -07:00
Max Filippov
6bf28969f6 xtensa: reduce double exception literal reservation
Double exception vector only needs 20 bytes of space for 5 literals, not
48. Reduce the reservation for double exception vector literals
accordingly. This fixes build for configurations with small user
exception vector size.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-06-05 11:52:07 -07:00
Linus Torvalds
857f864014 pci-v4.12-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZEHmsAAoJEFmIoMA60/r88SgQAJbFddueb0+DfJ+USDud4b/Z
 akfS+G1UAm+TgtMyh1wM49dHzFssp36uWJxtWI+bPqBzuy94PMCbz7JVUV28gX9G
 tFhFuc5YH94I/3y85rbZnolb6uZN9MhLjzTFqDC9ilW6HFqmwK4t4wlHSCjQN1St
 svLYvs2G6n6/VK3Fre7/wOvdZ1erG4Qod+kn5Tx3K5TQydmRlaSBfK+DRANuDBkM
 KzGO7Bkc/Cx8hb9pHmaey/wxmNrrgmVjTtWrEnb2tEq833zP4h6GhUIJEKodMSi5
 gXPNZgKlu3n5L592M0UCh4EoHejzkv9wrcsoDm+djmsc5Zg2Howq4kAdHP8k4hUG
 0gt8n0ni9vhJN56jikrGi7cAdHCKSNnx2Ue/qTCbX0ncB3XUMuJxJwCsgW/6wa9f
 oU7tRtTS03UltnKoFAcyYclS4TaSY4SA4ySaK6Hi+cRkdVFDdyHQYbHHNSU7MsA+
 IS2tXvGoIdSYyrZMHSRcl2rRTfYQUkmPEvBF3LvqZr32M4mJMmUNAPLZaly373ZE
 iwq0ZJlrLeM0cqdFIG3S60RtJyQk/HBN1NMqrYHArWOxvWIgNd5F8NCsTTxY3wU3
 IxgBIuUFcbVwVkqEHGs8K5AvB3oghqdnA3eGOV79799eMtLn3LOvyIlpHMSw9WUq
 ags00JtMLitfNPBH3eSl
 =eE4D
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - add framework for supporting PCIe devices in Endpoint mode (Kishon
   Vijay Abraham I)

 - use non-postable PCI config space mappings when possible (Lorenzo
   Pieralisi)

 - clean up and unify mmap of PCI BARs (David Woodhouse)

 - export and unify Function Level Reset support (Christoph Hellwig)

 - avoid FLR for Intel 82579 NICs (Sasha Neftin)

 - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig)

 - short-circuit config access failures for disconnected devices (Keith
   Busch)

 - remove D3 sleep delay when possible (Adrian Hunter)

 - freeze PME scan before suspending devices (Lukas Wunner)

 - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava)

 - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann)

 - add arch-specific alignment control to improve device passthrough by
   avoiding multiple BARs in a page (Yongji Xie)

 - add sysfs sriov_drivers_autoprobe to control VF driver binding
   (Bodong Wang)

 - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas)

 - fix crashes when unbinding host controllers that don't support
   removal (Brian Norris)

 - add driver for MicroSemi Switchtec management interface (Logan
   Gunthorpe)

 - add driver for Faraday Technology FTPCI100 host bridge (Linus
   Walleij)

 - add i.MX7D support (Andrey Smirnov)

 - use generic MSI support for Aardvark (Thomas Petazzoni)

 - make Rockchip driver modular (Brian Norris)

 - advertise 128-byte Read Completion Boundary support for Rockchip
   (Shawn Lin)

 - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin)

 - convert atomic_t to refcount_t in HV driver (Elena Reshetova)

 - add CPU IRQ affinity in HV driver (K. Y. Srinivasan)

 - fix PCI bus removal in HV driver (Long Li)

 - add support for ThunderX2 DMA alias topology (Jayachandran C)

 - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki)

 - add ITE 8893 bridge DMA alias quirk (Jarod Wilson)

 - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
   (Manish Jaggi)

* tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits)
  PCI: Don't allow unbinding host controllers that aren't prepared
  ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
  MAINTAINERS: Add PCI Endpoint maintainer
  Documentation: PCI: Add userguide for PCI endpoint test function
  tools: PCI: Add sample test script to invoke pcitest
  tools: PCI: Add a userspace tool to test PCI endpoint
  Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
  misc: Add host side PCI driver for PCI test function device
  PCI: Add device IDs for DRA74x and DRA72x
  dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
  PCI: dwc: dra7xx: Workaround for errata id i870
  dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
  PCI: dwc: dra7xx: Add EP mode support
  PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
  dt-bindings: PCI: Add DT bindings for PCI designware EP mode
  PCI: dwc: designware: Add EP mode support
  Documentation: PCI: Add binding documentation for pci-test endpoint function
  ixgbe: Use pcie_flr() instead of duplicating it
  IB/hfi1: Use pcie_flr() instead of duplicating it
  PCI: imx6: Fix spelling mistake: "contol" -> "control"
  ...
2017-05-08 19:03:25 -07:00
Markus Elfring
c32537d49f xtensa: Use seq_puts() in c_show()
A string which did not contain a data format specification should be put
into a sequence. Thus use the corresponding function "seq_puts".

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-05-08 13:16:22 -07:00
Max Filippov
2a4e669dd6 Merge branch 'xtensa-sim-params' into xtensa-fixes 2017-05-07 10:39:03 -07:00
Max Filippov
062b1c19b8 xtensa: clean up access to spilled registers locations
Define macros SPILL_SLOT* that return a reference to the stack location
of the spill slot for specific register and use them instead of opencoded
address calculations.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-05-01 10:34:43 -07:00
Max Filippov
f984409a00 xtensa: use generic tracehooks
Use tracehook_report_syscall_{entry,exit} instead of a local copy of it
in do_syscall_trace. Allow tracehook to cancel syscall by returning
invalid syscall number to the system_call function.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-05-01 07:00:10 -07:00
Max Filippov
1b47a683a0 xtensa: clean up xtensa/kernel/ptrace.c
- make locally-used functions static;
- drop meaningless comments and commented out code;
- fix code style and alignment.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-05-01 07:00:09 -07:00
Max Filippov
d9c7710db9 xtensa: drop unused fast_io_protect function
fast_io_protect is not used anywhere, drop its definition.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-05-01 06:58:31 -07:00
Max Filippov
60e22cffb5 xtensa: use ITLB_HIT_BIT instead of hardcoded number
There is ITLB_HIT_BIT macro, no need to use 0x8 to check for TLB hit.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-04-28 13:38:04 -07:00