Oppo has issued firmware updates that change alt setting used for DSD
support. However, these devices seem to support auto-detection, so
support is moved from explicit whitelisting to auto-detection.
Also Rotel devices have USB interfaces that support DSD with
auto-detection.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add DSD support auto-detection for newer Playback Designs devices. Older
device generations have a different USB interface implementation.
Keep the auto-detection VID whitelist sorted.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rework DAI format calculation in preparation for adding more formats
later. As a side-effect this enables all CBM/CBS x CFM/CFS combinations
for supported formats. (Note: the additional modes are not tested.)
Note: this changes FSEDGE to POSITIVE for I2S CBM_CFS mode as the TXSYN
interrupt is not used anyway.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/f5949b0326fdcdca072f3ed03f77de9e207631cd.1566677788.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow SSC to be used on platforms described using audio-graph-card
in Device Tree.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/233d5461f4448df151755de7b69a0cd3ad310d5c.1566677788.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Use force_suspend/resume to make sure clocks are disabled/enabled
accordingly during system suspend/resume.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/1566944026-18113-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mt8183 tdm out support S16_LE/S24_LE/S32_LE formats. When output S32_LE,
we need set hd_align so that memif can output MSB 24bits. When output
S24_LE, we need reset hd_align so that memif can output LSB 24bits.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Link: https://lore.kernel.org/r/1566622726-27113-1-git-send-email-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The calibration process at booting will reset registers and bypass cache
to make sure the calibration is done.
We add mutex protection to avoid unexpected settings while
the registration process and calibration are interleaved.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20190826090052.1875-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes inverted Left-Right channel of headphone mixer
volume by wrong shift_left, shift_right values.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Link: https://lore.kernel.org/r/20190826153900.25969-2-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently topology is kept in memory while driver is running. It's
unnecessary, as it's only needed during parsing.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20190827141712.21015-6-amadeuszx.slawinski@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When we are printing module params, we were actually printing module id
instead of type, but debug message was saying that number we get is type.
So print module type, as it is useful when debugging paths, but also
keep printing module id, as it is used in all other logs.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com>
Link: https://lore.kernel.org/r/20190827141712.21015-5-amadeuszx.slawinski@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
We use snd_soc_dapm_new_control_unlocked for topology and have local
declaration, instead declare it properly in header like already declared
snd_soc_dapm_new_control.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com>
Link: https://lore.kernel.org/r/20190827141712.21015-4-amadeuszx.slawinski@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If ipc->ops.reply_msg_match is NULL, we may end up using uninitialized
mask value.
reported by smatch:
sound/soc/intel/common/sst-ipc.c:266 sst_ipc_reply_find_msg() error: uninitialized symbol 'mask'.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com>
Link: https://lore.kernel.org/r/20190827141712.21015-3-amadeuszx.slawinski@linux.intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
The device_link_add() function only returns NULL on error, it doesn't
return error pointers.
Fixes: 202acc565a ("ASoC: SOF: imx: Add i.MX8 HW support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20190826131855.GA6840@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
The last set of reworks included some fixes to change the A83t behaviour
and "fix" it.
It turns out that the controller described in the datasheet and the one
supported here are not the same, yet the A83t has the two of them, and the
one supported in the driver wasn't the one described in the datasheet.
Fix this by reintroducing the proper quirks.
Fixes: 69e450e50c ("ASoC: sun4i-i2s: Fix the LRCK period on A83t")
Fixes: bf943d5279 ("ASoC: sun4i-i2s: Fix MCLK Enable bit offset on A83t")
Fixes: 2e04fc4dbf ("ASoC: sun4i-i2s: Fix WSS and SR fields for the A83t")
Fixes: 515fcfbc77 ("ASoC: sun4i-i2s: Fix LRCK and BCLK polarity offsets on newer SoCs")
Fixes: c1d3a921d7 ("ASoC: sun4i-i2s: Fix the MCLK and BCLK dividers on newer SoCs")
Fixes: fb19739d7f ("ASoC: sun4i-i2s: Use module clock as BCLK parent on newer SoCs")
Fixes: 71137bcd0a ("ASoC: sun4i-i2s: Move the format configuration to a callback")
Fixes: d70be625f2 ("ASoC: sun4i-i2s: Move the channel configuration to a callback")
Reported-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/20190827123131.29129-2-mripard@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In case of error, the function devm_ioremap_wc() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.
Fixes: 202acc565a ("ASoC: SOF: imx: Add i.MX8 HW support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20190826120003.183279-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove unused variable mt8183_mt6358_ts3a227_max98357_dapm_widgets and
mt8183_mt6358_ts3a227_max98357_dapm_routes. They are accidentially
included when rebasing commits.
Fixes: 6191cbde5f ("ASoC: mediatek: mt8183: switch tdm pins gpio function when playback on or off")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20190826032642.27324-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of small fixes as usual:
- More coverage of USB-audio descriptor sanity checks
- A fix for mute LED regression on Conexant HD-audio codecs
- A few device-specific fixes and quirks for USB-audio and HD-audio
- A fix for (die-hard remaining) possible race in sequencer core
- FireWire oxfw regression fix that was introduced in 5.3-rc1
-----BEGIN PGP SIGNATURE-----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=Cco7
-----END PGP SIGNATURE-----
Merge tag 'sound-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes as usual:
- More coverage of USB-audio descriptor sanity checks
- A fix for mute LED regression on Conexant HD-audio codecs
- A few device-specific fixes and quirks for USB-audio and HD-audio
- A fix for (die-hard remaining) possible race in sequencer core
- FireWire oxfw regression fix that was introduced in 5.3-rc1"
* tag 'sound-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: oxfw: fix to handle correct stream for PCM playback
ALSA: seq: Fix potential concurrent access to the deleted pool
ALSA: usb-audio: Check mixer unit bitmap yet more strictly
ALSA: line6: Fix memory leak at line6_init_pcm() error path
ALSA: usb-audio: Fix invalid NULL check in snd_emuusb_set_samplerate()
ALSA: hda/ca0132 - Add new SBZ quirk
ALSA: usb-audio: Add implicit fb quirk for Behringer UFX1604
ALSA: hda - Fixes inverted Conexant GPIO mic mute led
Currently we disallow the runtime PM of the HD-audio controller if
it's bound with HDMI/DP on Nvidia / AMD unless it's for dGPU. This is
for keeping the link up to get the proper notification for ELD
hotplug.
As explained in the commit 37a3a98ef6 ("ALSA: hda - Enable runtime
PM only for discrete GPU"), this keep-power-up behavior is rather a
stop-gap solution until the ELD notification via audio component.
And now we finally got the audio component for these graphics drivers
via commit ade49db337 ("ALSA: hda/hdmi - Allow audio component for
AMD/ATI and Nvidia HDMI"), so it's time to change.
This patch makes HD-audio controller again runtime-suspendable when
the device gets bound with audio component in HDMI codec driver. For
making it easier to access from the codec driver, move the flag into
the common hda_bus object instead of hda_intel flag. Also rename it
to keep_power, to indicate the actual meaning.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 3e9acd7ac6 (ASoC: sun4i-i2s: Remove
duplicated quirks structure").
It turns out that while one I2S controller is described in the A83t
datasheet, the driver supports another, undocumented, one that has been
inherited from the older SoCs, while the documented one uses the new
design.
Fixes: 3e9acd7ac6 ("ASoC: sun4i-i2s: Remove duplicated quirks structure")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/20190827093206.17919-1-mripard@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This platform device is registered from "fsl_audmix", which is
its parent device. If use pdev->dev.parent for the priv->card.dev,
the value set by dev_set_drvdata in parent device will be covered
by the value in child device.
Fixes: b86ef53677 ("ASoC: fsl: Add Audio Mixer machine driver")
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/1566921315-23402-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix sparse warnings:
sound/soc/sof/imx/imx8.c:104:6: warning: symbol 'imx8_dsp_handle_reply' was not declared. Should it be static?
sound/soc/sof/imx/imx8.c:115:6: warning: symbol 'imx8_dsp_handle_request' was not declared. Should it be static?
sound/soc/sof/imx/imx8.c:336:5: warning: symbol 'imx8_get_bar_index' was not declared. Should it be static?
sound/soc/sof/imx/imx8.c:341:6: warning: symbol 'imx8_ipc_msg_data' was not declared. Should it be static?
sound/soc/sof/imx/imx8.c:348:5: warning: symbol 'imx8_ipc_pcm_params' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20190823125939.30012-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When userspace application calls ioctl(2) to configure hardware for PCM
playback substream, ALSA OXFW driver handles incoming AMDTP stream.
In this case, outgoing AMDTP stream should be handled.
This commit fixes the bug for v5.3-rc kernel.
Fixes: 4f380d0070 ("ALSA: oxfw: configure packet format in pcm.hw_params callback")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA oxfw driver supports Griffin FireWave. This device supports one
isochronous stream for PCM playback. Current driver executes code to
wait event for stream structure of opposite direction. This causes
NULL pointer dereference.
This commit fixes the bug.
Fixes: ac5d77864c ("ALSA: oxfw: support AMDTP domain")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We recently cleaned up the error handling in commit 52c3e317a8 ("ALSA:
usb-audio: Unify the release of usb_mixer_elem_info objects") but
accidentally left this stray return.
Fixes: 52c3e317a8 ("ALSA: usb-audio: Unify the release of usb_mixer_elem_info objects")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The previous addition of descriptor validation may lead to a NULL
dereference at create_yamaha_midi_quirk() when either injd or outjd is
NULL. Add proper non-NULL checks.
Fixes: 57f8770620 ("ALSA: usb-audio: More validations of descriptor units")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The primary changes in this patch are cleanups of __check_input_term()
and move to a non-nested switch-case block by evaluating the pair of
UAC version and the unit type, as we've done for parse_audio_unit().
Also each parser is split into the function for readability.
Now, a slight behavior change by this cleanup is the handling of
processing and extension units. Formerly we've dealt with them
differently between UAC1/2 and UAC3; the latter returns an error if no
input sources are available, while the former continues to parse.
In this patch, unify the behavior in all cases: when input sources are
available, it parses recursively, then override the type and the id,
as well as channel information if not provided yet.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The input pool of a client might be deleted via the resize ioctl, the
the access to it should be covered by the proper locks. Currently the
only missing place is the call in snd_seq_ioctl_get_client_pool(), and
this patch papers over it.
Reported-by: syzbot+4a75454b9ca2777f35c7@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
From function name point of view, "soc_post_component_init()" sounds
like "component initialize function".
But in reality it is rtd setup function.
This patch renames soc_post_component_init() to soc_rtd_init()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v9uo7lc3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Initialize component related list at random place is very difficult
to read. This patch initialize it at snd_soc_component_initialize().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87y2zozazp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_get_control_data returns negative values even though the return
value is defined unsigned (size_t). So change the return value type to
int and add the data size as pointer argument to sof_get_control_data to
avoid ambiquity in the meaning of the return type.
Fixes: cac974a51e ("ASoC: SOF: topology: use set_get_data in process load")
Reported by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
Link: https://lore.kernel.org/r/20190821211138.14618-1-jaska.uimonen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It might return without initializing in error case.
In such case, uninitialized variable might be used at error handler.
This patch initializes all necessary variable before return.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87zhk4zazt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 52abe6cc18 ("ASoC: topology: fix oops/use-after-free case
with dai driver") fixups remove_dai() error, but it is using
list_for_each_entry() for component->dai_list.
We already have for_each_component_dais() macro for it.
Let's use exising method.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tvaczazd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to check return value for
soc_cleanup_card_resources(). Let't makes it as void.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/871rxg1lda.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can find specified name component via snd_soc_rtdcom_lookup().
But, it is not enough under multi CPU/Codec/Platform, because many
components which have same driver name might be connected to same rtd.
Not using this function as much as possible is best solution,
but some drivers are already deeply depended to it.
We can expand this function, for example having "num" which specifies
found order at parameter, etc (In such case, it need to have fixed
probing order).
Or, use different driver name in such component, etc.
We will have such issue if multi CPU/Codec/Platform were supported.
To indicate it, this patch adds NOTE to this function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/874l2c1ldi.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
soc-core.c is using device_unregiser(), but there is no its paired
device_regiser(). We can find its code at soc_post_component_init()
which is using device_initialize() and device_add().
Here, device_initialize() + device_add() = device_register().
-- linux/drivers/base/core.c --
int device_register(struct device *dev)
{
device_initialize(dev);
return device_add(dev);
}
device_initialize() is doing each dev member's initialization only,
not related to device parent/release/groups.
Thus, we can postpone it.
let's use device_register() instead of device_initialize()/device_add().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/878sro1ldw.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/mediatek/mt2701/mt2701-afe-common.h:66:27: warning:
mt2701_afe_backup_list defined but not used [-Wunused-const-variable=]
mt2701_afe_backup_list is only used in mt2701-afe-pcm.c,
so just move the definition over there.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190822143747.20944-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/wm8988.c:270:30: warning:
wm8988_rline_enum defined but not used [-Wunused-const-variable=]
wm8988_rline_enum should be used in wm8988_right_line_controls.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 5409fb4e32 ("ASoC: Add WM8988 CODEC driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190822143608.59824-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull USB validation patches. It's based on the latest 5.3 development
branch, so we shall catch up the whole things.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that we got the more comprehensive validation code for USB-audio
descriptors, the check of overflow in each descriptor unit parser
became superfluous. Drop some of the obvious cases.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of the direct kfree() calls, introduce a new local helper to
release the usb_mixer_elem_info object. This will be extended to do
more than a single kfree() in the later patches.
Also, use the standard goto instead of multiple calls in
parse_audio_selector_unit() error paths.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Minor code refactoring by combining the UAC version and the type in
the switch-case flow, so that we reduce the indentation and
redundancy. One good bonus is that the duplicated definition of the
same type value (e.g. UAC2_EFFECT_UNIT) can be handled more cleanly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce a new helper to validate each audio descriptor unit before
and check the unit before actually accessing it. This should harden
against the OOB access cases with malformed descriptors that have been
recently frequently reported by fuzzers.
The existing descriptor checks are still kept although they become
superfluous after this patch. They'll be cleaned up eventually
later.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The bmControls (for UAC1) or bmMixerControls (for UAC2/3) bitmap has a
variable size depending on both input and output pins. Its size is to
fit with input * output bits. The problem is that the input size
can't be determined simply from the unit descriptor itself but it
needs to parse the whole connected sources. Although the
uac_mixer_unit_get_channels() tries to check some possible overflow of
this bitmap, it's incomplete due to the lack of the evaluation of
input pins.
For covering possible overflows, this patch adds the bitmap overflow
check in the loop of input pins in parse_audio_mixer_unit().
Fixes: 0bfe5e434e ("ALSA: usb-audio: Check mixer unit descriptors more strictly")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lenovo ThinkCentre M73 and M93 don't seem to have a proper beep
although the driver tries to probe and set up blindly.
Blacklist these machines for suppressing the beep creation.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204635
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some Realtek codec parsers didn't check the availability of PC beep.
Add has_cdefine_beep() check appropriately.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
I forgot to release the allocated object at the early error path in
line6_init_pcm(). For addressing it, slightly shuffle the code so
that the PCM destructor (pcm->private_free) is assigned properly
before all error paths.
Fixes: 3450121997 ("ALSA: line6: Fix write on zero-sized buffer")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In addition to the I2S format, the controller also supports the DSP_*
formats.
This requires some extra care on the LRCK period calculation, since the
controller, with the PCM formats, require that the value set is no longer
the periods of LRCK for a single channel, but for all of them.
Let's add the code to deal with this, and support the DSP_A and DSP_B
formats.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/5562db1ac8759f12b1b87c3258223eed629ef771.1566392800.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The LRCK period field in the FMT0 register holds the number of LRCK period
for one channel in I2S mode.
This has been hardcoded to 32, while it really should be the physical width
of the format, which creates an improper clock when using a 16bit format,
with the i2s controller as LRCK master.
Fixes: 7d2993811a ("ASoC: sun4i-i2s: Add support for H3")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/f08a0c3605cd1d79752b38d704690190183f7865.1566392800.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The clock dividers function has been using the word size to compute the
clock rate at which it's supposed to be running, but the proper formula
would be to use the physical width and / or slot width in TDM.
It doesn't make any difference at the moment since all the formats
supported have the same sample width and physical width, but it's not going
to last forever.
Fixes: 7d2993811a ("ASoC: sun4i-i2s: Add support for H3")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/41a359d9885f397e066816961e5e3236afcbe0a1.1566392800.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_remove_dai_link() has card connected dai_link check. but
1) we need to call list_del() anyway,
because it is "remove" function,
2) It is doing many thing for this card / dai_link already
before checking dai_link.
This patch removes poinless dai_link check
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/875zms1ldm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_initialize_card_lists() is doing card related
INIT_LIST_HEAD(), but, it is already doing at
snd_soc_register_card(). We don't need to do it separately.
This patch merges these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/877e781ldq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SAI module on imx8qm features a register map similar with imx6 series
(it doesn't have VERID and PARAM registers at the beginning
of address spece).
Also, it has one FIFO which can help up to 64 * 32 bit samples.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20190814082911.665-2-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The quirk function snd_emuusb_set_samplerate() has a NULL check for
the mixer element, but this is useless in the current code. It used
to be a check against mixer->id_elems[unitid] but it was changed later
to the value after mixer_eleme_list_to_info() which is always non-NULL
due to the container_of() usage.
This patch fixes the check before the conversion.
While we're at it, correct a typo in the comment in the function,
too.
Fixes: 8c558076c7 ("ALSA: usb-audio: Clean up mixer element list traverse")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This controller supports capture and playback running at the same time,
with the limitation that both capture and playback must be configured the
same way (sample rate, sample format, number of channels, etc). For this,
we have to assure that the configuration registers look the same when
capture and playback are initiated.
This patch fixes a bug in which the controller is in master mode and the
hw_params() callback fails for the second audio stream. The fail occurs
because the divisors are calculated after comparing the configuration
registers for capture and playback. The fix consists in calculating the
divisors before comparing the configuration registers. BCLK and LRC are
then configured and started only if the controller is not already running.
Fixes: 7e0cdf545a55 ("ASoC: mchp-i2s-mcc: add driver for I2SC Multi-Channel Controller")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20190820162411.24836-4-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since hw_free() can be called multiple times and not just after a stop
trigger command, we should check whether the RX or TX ready interrupt was
truly enabled previously. For this, we assure that the condition of the
wait event is always true, except when RX/TX interrupts are enabled.
Fixes: 7e0cdf545a55 ("ASoC: mchp-i2s-mcc: add driver for I2SC Multi-Channel Controller")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20190820162411.24836-3-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If hw_free() gets called after hw_params(), GCLK remains prepared,
preventing further use of it. This patch fixes this by unpreparing the
clock in hw_free() or if hw_params() gets an error.
Fixes: 7e0cdf545a55 ("ASoC: mchp-i2s-mcc: add driver for I2SC Multi-Channel Controller")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20190820162411.24836-2-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The channels number have been hardcoded to 2 so far, while the controller
supports more than that.
Remove the instance where it has been hardcoded to compute the BCLK
divider, and pass it through as an argument to ease further support of more
channels.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/48887cf7abfaab6597db233b24d7a088a913e48a.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The LRCK polarity "normal" polarity in the I2S/TDM specs and in the
Allwinner datasheet are not the same. In the case where the i2s controller
is being used as the LRCK master, it's pretty clear when looked at under a
scope.
Let's fix this, and add a comment to clear up as much the confusion as
possible.
Fixes: 7d2993811a ("ASoC: sun4i-i2s: Add support for H3")
Fixes: 21faaea134 ("ASoC: sun4i-i2s: Add support for A83T")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/e03fb6b2a916223070b9f18405b0ef117a452ff4.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The LRCK and BCLK polarity offsets on newer SoCs has been
changed, yet the driver didn't take it into account for all of them.
This was taken into account for the H3, but not the A83t. This was handled
using a reg_field for the H3.
However, the value in that field will not be the same, so reg_field is not
adapted in that case. Let's change for proper calls with the regular
values.
Fixes: 21faaea134 ("ASoC: sun4i-i2s: Add support for A83T")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/9cbdde80a299288878e58225df4d7884e0301348.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
From: Marcus Cooper <codekipper@gmail.com>
The clock division dividers have changed between the older (A10/A31) and
newer (H3, A64, etc) SoCs.
While this was addressed through an offset on some SoCs, it was missing
some dividers as well, so the support wasn't perfect. Let's introduce a
pointer in the quirk structure for the divider calculation functions to use
so we can have the proper range now.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
[Maxime: Fix the commit log, use a field in the quirk structure]
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/0e5b4abf06cd3202354315201c6af44caeb20236.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On the first generation of Allwinner SoCs (A10-A31), the i2s controller was
using the MCLK as BCLK parent. However, this changed since the introduction
of the A83t and BCLK now uses the module clock as its parent.
Let's introduce a hook to get the parent rate and use that in our divider
calculations.
Fixes: 7d2993811a ("ASoC: sun4i-i2s: Add support for H3")
Fixes: 21faaea134 ("ASoC: sun4i-i2s: Add support for A83T")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/0b6665be216b3bd0e7bc43724818f05f3f8ee881.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The two main generations of our I2S controller require a slightly different
format configuration, mostly because of a quite different register layout
and some additional registers being needed on the newer generation.
This used to be controlled through a bunch of booleans, however this proved
to be quite impractical, especially since a bunch of SoCs forgot to set
those parameters and therefore were broken from that point of view.
Fixes: 21faaea134 ("ASoC: sun4i-i2s: Add support for A83T")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/dc818644c3e40734e7a97247c994b1fca1c3c047.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The two main generations of our I2S controller require a slightly different
channel configuration, mostly because of a quite different register layout
and some additional registers being needed on the newer generation.
This used to be controlled through a bunch of booleans, however this proved
to be quite impractical, especially since a bunch of SoCs forgot to set
those parameters and therefore were broken from that point of view.
Fixes: 21faaea134 ("ASoC: sun4i-i2s: Add support for A83T")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/6414463de69584e8227fa495b13aa5f4798e1f0e.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Every single baytrail chromebook sets PMC to 0, as can be seeing
below by searching through coreboot source code:
$ grep -rl "PMC_PLT_CLK\[0\]" .
./rambi/variants/glimmer/devicetree.cb
./rambi/variants/clapper/devicetree.cb
./rambi/variants/swanky/devicetree.cb
./rambi/variants/enguarde/devicetree.cb
./rambi/variants/winky/devicetree.cb
./rambi/variants/kip/devicetree.cb
./rambi/variants/squawks/devicetree.cb
./rambi/variants/orco/devicetree.cb
./rambi/variants/ninja/devicetree.cb
./rambi/variants/heli/devicetree.cb
./rambi/variants/sumo/devicetree.cb
./rambi/variants/banjo/devicetree.cb
./rambi/variants/candy/devicetree.cb
./rambi/variants/gnawty/devicetree.cb
./rambi/variants/rambi/devicetree.cb
./rambi/variants/quawks/devicetree.cb
Plus, Cyan (only non-baytrail chromebook with max98090) also needs
this patch for audio to work.
Thus, this commit adds all the missing devices to bsw_max98090 quirk
table, implemented by commit a182ecd380 ("ASoC: intel:
cht_bsw_max98090_ti: Add quirk for boards using pmc_plt_clk_0").
Signed-off-by: Daniel Stuart <daniel.stuart14@gmail.com>
Link: https://lore.kernel.org/r/20190815171300.30126-1-daniel.stuart14@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MCLK divider calculation is currently computing the ideal divider using
the oversample rate, the sample rate and the parent rate.
However, since we have access to the frequency is supposed to be running at
already, and as it turns out we're using it to compute the oversample rate,
we can just use the ratio between the parent rate and the MCLK rate to
simplify a bit the formula.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/dcc5deb2eb650758d268bddd20f60ba58856d024.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The BCLK divider should be calculated using the parameters that actually
make the BCLK rate: the number of channels, the sampling rate and the
sample width.
We've been using the oversample_rate previously because in the former SoCs,
the BCLK's parent is MCLK, which in turn is being used to generate the
oversample rate, so we end up with something like this:
oversample = mclk_rate / sampling_rate
bclk_div = oversample / word_size / channels
So, bclk_div = mclk_rate / sampling_rate / word_size / channels.
And this is actually better, since the oversampling ratio only plays a role
because the MCLK is its parent, not because of what BCLK is supposed to be.
Furthermore, that assumption of MCLK being the parent has been broken on
newer SoCs, so let's use the proper formula, and have the parent rate as an
argument.
Fixes: 7d2993811a ("ASoC: sun4i-i2s: Add support for H3")
Fixes: 21faaea134 ("ASoC: sun4i-i2s: Add support for A83T")
Fixes: 66ecce3325 ("ASoC: sun4i-i2s: Add compatibility with A64 codec I2S")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/c3595e3a9788c2ef2dcc30aa3c8c4953bb5cc249.1566242458.git-series.maxime.ripard@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Every single baytrail chromebook sets PMC to 0, as can be seeing
below by searching through coreboot source code:
$ grep -rl "PMC_PLT_CLK\[0\]" .
./rambi/variants/glimmer/devicetree.cb
./rambi/variants/clapper/devicetree.cb
./rambi/variants/swanky/devicetree.cb
./rambi/variants/enguarde/devicetree.cb
./rambi/variants/winky/devicetree.cb
./rambi/variants/kip/devicetree.cb
./rambi/variants/squawks/devicetree.cb
./rambi/variants/orco/devicetree.cb
./rambi/variants/ninja/devicetree.cb
./rambi/variants/heli/devicetree.cb
./rambi/variants/sumo/devicetree.cb
./rambi/variants/banjo/devicetree.cb
./rambi/variants/candy/devicetree.cb
./rambi/variants/gnawty/devicetree.cb
./rambi/variants/rambi/devicetree.cb
./rambi/variants/quawks/devicetree.cb
Plus, Cyan (only non-baytrail chromebook with max98090) also needs
this patch for audio to work.
Thus, this commit adds all the missing devices to bsw_max98090 quirk
table, implemented by commit a182ecd380 ("ASoC: intel:
cht_bsw_max98090_ti: Add quirk for boards using pmc_plt_clk_0").
Signed-off-by: Daniel Stuart <daniel.stuart14@gmail.com>
Link: https://lore.kernel.org/r/20190815171300.30126-1-daniel.stuart14@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the devm variant to get the formatter reset so it is properly freed
on device removal
Fixes: 751bd5db52 ("ASoC: meson: axg-tdm-formatter: add reset")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190820123413.22249-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When transitioning to supend state, uniphier_aio_dai_suspend() is called
and asserts reset lines and disables clocks.
However, if there are two or more DAIs, uniphier_aio_dai_suspend() are
called multiple times, and double reset assersion will cause.
This patch defines the counter that has the number of DAIs at first, and
whenever uniphier_aio_dai_suspend() are called, it decrements the
counter. And only if the counter is zero, it asserts reset lines and
disables clocks.
In the same way, uniphier_aio_dai_resume() are called, it increments the
counter after deasserting reset lines and enabling clocks.
Fixes: 139a342002 ("ASoC: uniphier: add support for UniPhier AIO CPU DAI driver")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1566281764-14059-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a new PCI subsys ID for the SBZ, as found and tested by
me and some reddit users.
Link: https://lore.kernel.org/lkml/20190819204008.14426-1-p.rekowski@gmail.com
Signed-off-by: Paweł Rekowski <p.rekowski@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Behringer UFX1604 requires the similar quirk to apply implicit fb like
another Behringer model UFX1204 in order to fix the noisy playback.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204631
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
"enabled" parameter historically referred to the device input or
output, not to the led indicator. After the changes added with the led
helper functions the mic mute led logic refers to the led and not to
the mic input which caused led indicator to be negated.
Fixing logic in cxt_update_gpio_led and updated
cxt_fixup_gpio_mute_hook
Also updated debug messages to ease further debugging if necessary.
Fixes: 184e302b46 ("ALSA: hda/conexant - Use the mic-mute LED helper")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jeronimo Borque <jeronimo@borque.com.ar>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All small fixes targeted for stable:
- Two fixes for USB-audio with malformed descriptor, spotted by
fuzzers
- Two fixes Conexant HD-audio codec wrt power management
- Quirks for HD-audio AMD platform and HP laptop
- HD-audio memory leak fix
-----BEGIN PGP SIGNATURE-----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=9hVN
-----END PGP SIGNATURE-----
Merge tag 'sound-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"All small fixes targeted for stable:
- Two fixes for USB-audio with malformed descriptor, spotted by
fuzzers
- Two fixes Conexant HD-audio codec wrt power management
- Quirks for HD-audio AMD platform and HP laptop
- HD-audio memory leak fix"
* tag 'sound-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Fix a stack buffer overflow bug in check_input_term
ALSA: usb-audio: Fix an OOB bug in parse_audio_mixer_unit
ALSA: hda - Add a generic reboot_notify
ALSA: hda - Let all conexant codec enter D3 when rebooting
ALSA: hda/realtek - Add quirk for HP Envy x360
ALSA: hda - Fix a memory leak bug
ALSA: hda - Apply workaround for another AMD chip 1022:1487
The Audio Link Hub DAI does not require any static configuration from
topology for now. We still need to pass the frame rate and format to
firmware.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190815192018.30570-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dummy support for SAI/ESAI digital audio interface
IPs found on i.MX8 boards.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190815192018.30570-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For i.MX6 SoloX, there is a mode of the SoC to shutdown all power
source of modules during system suspend and resume procedure.
Thus, AUDMUX needs to save all the values of registers before the
system suspend and restore them after the system resume.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1565931794-7218-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have another Dell laptop which needs the DELL4_MIC_NO_PRESENCE,
and this laptop has different pincfg definitions from existing
ones in the pintbl, rather adding a new entry, let us define
a tbl in the fallback_pin_fixup_tbl and this tbl will match
all dell machines with alc289 codec and the pins of 0x19 and 0x1b
are undef by default.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With the existing pintbl, we already have many entries in it. it is
better to figure out a new way to reduce the size of the pintbl.
We plan to define a new tbl which will match more machines with a
single tbl, To do that, this function doesn't need to match all valid
pins between machine and tbl, it just needs to match all pins defined
in the tbl with the machine.
And the plan is to move some tbls from pin_fixup_tbl to
fallback_pin_fixup_tbl gradually.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
`check_input_term` recursively calls itself with input from
device side (e.g., uac_input_terminal_descriptor.bCSourceID)
as argument (id). In `check_input_term`, if `check_input_term`
is called with the same `id` argument as the caller, it triggers
endless recursive call, resulting kernel space stack overflow.
This patch fixes the bug by adding a bitmap to `struct mixer_build`
to keep track of the checked ids and stop the execution if some id
has been checked (similar to how parse_audio_unit handles unitid
argument).
Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Signed-off-by: Hui Peng <benquike@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit ee5f85d929 ("ALSA: hda: Add codec on bus address
table lately"). The commit caused several regression since I've
overlooked that the function doesn't manage only the caddr_tbl but
also the codec linked list that is referred indirectly in the other
drivers.
Revert for now to make everything back to work.
Fixes: ee5f85d929 ("ALSA: hda: Add codec on bus address table lately")
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add Kconfig, PCI ID and chip info for EHL platform.
Note that the core mask is different from previous platforms, only
Core0 can be controlled by the host. Additional patches will be
required for multi-core functionality.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190815155749.29304-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are no upstream machine drivers just yet so just add dummy table
for compilation in nocodec-mode.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190815155749.29304-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Kconfig, PCI ID and chip info for Tiger Lake platform.
Note that the core mask is different from previous platforms, only
Core0 can be controlled by the host. Additional patches will be
required for multi-core functionality.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190815155749.29304-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
reuse and add Cometlake support with:
SSP0 for DA7219 headphone codec
SSP1 for MAX98357a speaker amp codec
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/1565851909-13825-1-git-send-email-mac.chiang@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pcm_mutex is used to prevent concurrent execution of snd_pcm_ops
callbacks. This works fine most of the cases but it can not handle setups
when the same DAI is used by different rtd, for example:
pcm3168a have two DAIs: one for Playback and one for Capture.
If the codec is connected to a single CPU DAI we need to have two dai_link
to support both playback and capture.
In this case the snd_pcm_ops callbacks can be executed in parallel causing
unexpected races in DAI drivers.
By moving the pcm_mutex up to card level this can be solved
while - hopefully - not breaking other setups.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190813104532.16669-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/88pm860x-codec.c:533:38: warning:
pcm_switch_controls defined but not used [-Wunused-const-variable=]
sound/soc/codecs/88pm860x-codec.c:560:38: warning:
aif1_mux defined but not used [-Wunused-const-variable=]
They are never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815092547.29564-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/cs42l56.c:206:30: warning:
adc_swap_enum defined but not used [-Wunused-const-variable=]
It is never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815092436.34632-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/es8328.c:102:35: warning:
pga_tlv defined but not used [-Wunused-const-variable=]
They are never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815092056.28724-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/tlv320aic31xx.c:261:29: warning:
cm_m_enum defined but not used [-Wunused-const-variable=]
It is never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815091738.21680-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/tlv320aic23.c:70:29: warning:
tlv320aic23_rec_src defined but not used [-Wunused-const-variable=]
It is never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815091534.57780-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/rt1011.c:981:35: warning:
dac_vol_tlv defined but not used [-Wunused-const-variable=]
sound/soc/codecs/rt1011.c:982:35: warning:
adc_vol_tlv defined but not used [-Wunused-const-variable=]
They are never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815090602.9000-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/max98371.c:157:35: warning:
max98371_noload_gain_tlv defined but not used [-Wunused-const-variable=]
It is never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815090404.72752-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/cs4349.c:358:32: warning:
cs4349_runtime_pm defined but not used [-Wunused-const-variable=]
cs4349_runtime_pm ops already defined, it seems
we should enable it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e40da86 ("ASoC: cs4349: Add support for Cirrus Logic CS4349")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815090157.70036-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/cs42l73.c:276:38: warning:
vsp_output_mux defined but not used [-Wunused-const-variable=]
sound/soc/codecs/cs42l73.c:279:38: warning:
xsp_output_mux defined but not used [-Wunused-const-variable=]
They are never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815085454.30384-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using two additional "%s" specifiers, put the constant string
literals directly to the format specifier.
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190621113116.47525-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most dmics produce a high level when they receive clock. The difference
between power-on and memory record time is about 10ms, but the dmic
needs 50ms to output normal data.
This commit add 100ms delay after SoC output clock so that we can cut
off the pop noise at the beginning.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Link: https://lore.kernel.org/r/1564980997-11359-1-git-send-email-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c:50:1: warning:
mt8183_mt6358_ts3a227_max98357_dapm_widgets defined but not used [-Wunused-const-variable=]
sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c:55:1: warning:
mt8183_mt6358_ts3a227_max98357_dapm_routes defined but not used [-Wunused-const-variable=]
They are never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190813144122.67676-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c:120:1: warning:
mt8183_da7219_max98357_dapm_widgets defined but not used [-Wunused-const-variable=]
sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c:124:40: warning:
mt8183_da7219_max98357_dapm_routes defined but not used [-Wunused-const-variable=]
They are never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190813143952.29232-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:799:38: warning:
mt2701_afe_o23_mix defined but not used [-Wunused-const-variable=]
sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:803:38: warning:
mt2701_afe_o24_mix defined but not used [-Wunused-const-variable=]
sound/soc/mediatek/mt2701/mt2701-afe-pcm.c:835:38: warning:
mt2701_afe_multi_ch_out_i2s4 defined but not used [-Wunused-const-variable=]
They are never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190813143811.31456-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If CONFIG_DMI is not set, gcc warns:
sound/soc/soc-core.c:81:27: warning:
dmi_blacklist defined but not used [-Wunused-const-variable=]
Add #ifdef guard around it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190813142501.13080-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/wm8737.c:112:29: warning:
high_3d defined but not used [-Wunused-const-variable=]
'high_3d' should be used for 3D High Cut-off.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 2a9ae13a26 ("ASoC: Add initial WM8737 driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190815091920.64480-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/cs4349.c:358:32: warning:
cs4349_runtime_pm defined but not used [-Wunused-const-variable=]
cs4349_runtime_pm ops already defined, it seems
we should enable it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e40da86 ("ASoC: cs4349: Add support for Cirrus Logic CS4349")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190815090157.70036-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The `uac_mixer_unit_descriptor` shown as below is read from the
device side. In `parse_audio_mixer_unit`, `baSourceID` field is
accessed from index 0 to `bNrInPins` - 1, the current implementation
assumes that descriptor is always valid (the length of descriptor
is no shorter than 5 + `bNrInPins`). If a descriptor read from
the device side is invalid, it may trigger out-of-bound memory
access.
```
struct uac_mixer_unit_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bDescriptorSubtype;
__u8 bUnitID;
__u8 bNrInPins;
__u8 baSourceID[];
}
```
This patch fixes the bug by add a sanity check on the length of
the descriptor.
Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Peng <benquike@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Drop EXPORT_SYMBOL*() from a few more stuff in HD-audio core that
aren't used outside. Particular the unsol event handler can be
staticized now because the recent change removed all external
callers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hdac_bus_add_device() and snd_hdac_remove_device() are called only
internally in hda-core. Let's drop the exports of them and move the
declarations into local.h.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The call of snd_hdac_bus_add_device() is needed only for registering
the codec onto the bus caddr_tbl[] that is referred essentially only
in the unsol event handler. That is, the reason of this call and the
release by the counter-part function snd_hdac_bus_remove_device() is
just to assure that the unsol event gets notified to the codec.
But the current implementation of the unsol notification wouldn't work
properly when the codec is still in a premature init state. So this
patch tries to work around it by delaying the caddr_tbl[] registration
at the point of snd_hdac_device_register().
Also, the order of snd_hdac_bus_remove_device() and device_del() calls
are shuffled to make sure that the unsol event is masked before
deleting the device.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204565
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We don't need to deal with the unsol events for Intel chips that are
tied with the graphics via audio component notifier. Although the
presence of the audio component is checked at the beginning of
hdmi_unsol_event(), better to short cut by dropping unsol_event ops.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204565
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Variable result is initialized to a value that is never read and it is
re-assigned later. The initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make codec enter D3 before rebooting or poweroff can fix the noise
issue on some laptops. And in theory it is harmless for all codecs
to enter D3 before rebooting or poweroff, let us add a generic
reboot_notify, then realtek and conexant drivers can call this
function.
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have 3 new lenovo laptops which have conexant codec 0x14f11f86,
these 3 laptops also have the noise issue when rebooting, after
letting the codec enter D3 before rebooting or poweroff, the noise
disappers.
Instead of adding a new ID again in the reboot_notify(), let us make
this function apply to all conexant codec. In theory make codec enter
D3 before rebooting or poweroff is harmless, and I tested this change
on a couple of other Lenovo laptops which have different conexant
codecs, there is no side effect so far.
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
sound/pci/hda/patch_sigmatel.c:981:30: warning:
stac9200_core_init defined but not used [-Wunused-const-variable=]
It is never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP Envy x360 (AMD Ryzen-based model) with 103c:8497 needs the same
quirk like HP Spectre x360 for enabling the mute LED over Mic3 pin.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204373
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change to remove the bus->io_ops callbacks used an older
version of the SOF code base, and when merged into Mark's for-next it
invalidated changes, resulting in broken compilation identified by
kbuild and reproduced during the weekly SOF rebase.
Restore SOF code overridden by git merge and apply Takashi's intended
change in the 'right' location.
Fixes: c2f16a94a8 ("Merge branch 'topic/hda-bus-ops-cleanup'")
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190812190502.30729-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Recent changes in the common IPC code introduced a build warning with
size_t fields, use the correct %zu format.
include/linux/dynamic_debug.h:82:16: warning: format '%lu' expects
argument of type 'long unsigned int', but argument 4 has type 'size_t'
[-Wformat=]
Fixes: abf31feea2 ('ASoC: Intel: Update request-reply IPC model')
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190812140305.17570-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
From stress testing of arecord, we found that period size
greater than ~900 will bring pl330 to DYING state and
can not recover within 100 iterations.
The result is that arecord will stuck and get I/O error,
and issue can not be recovered until reboot.
This issue does not happen when period size is small.
Set constraint of period size to 240 to prevent such issue.
With the constraint, there will be no issue after 2000 iterations.
We can revert this patch once the root cause is found
in rockchip's pl330 implementation.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://lore.kernel.org/r/20190813074430.191791-1-cychiang@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF project maintains 6 topologies for HDaudio (iDisp or
HDaudio+iDisp, no DMIC, 2 DMICs, 4 DMICs). The user is currently
required to manually rename the topology file used in
/lib/firmware/intel/sof-tplg. We can do better to avoid such
renames and use logic to select the relevant file.
The NHLT information can be used to figure out which topology file
should be used.
Alternatively, when NHLT is not present in ACPI tables or is possibly
incorrect, a module parameter can provide that information, e.g. on
Up^2 board with the test DMIC kit.
Tested on Up^2 board and Acer Swift-SF314-55
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190812160623.20821-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently we set hdac_stream.fifo_size field only for the playback
stream by some odd reason I forgot, while this field isn't referred in
any places. Actually this fifo_size field would have been required in
the position report correction for VIA chipset, but due to the lack of
the fifo_size set for capture streams, snd-hda-intel driver fetches
the register by itself.
This patch straightens and simplifies the code by setting the
fifo_size field for both playback and capture streams, and use it in
the HD-audio controller driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When using right_j format and the codec is slave it can support 16bit
format, but only if slot_width == 16, in the same DAI mode the 24 bit
audio can work with 24 or 32 slot_width.
Because of this, the codec and CPU needs to be reconfigured when the sample
format changes.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190812095226.18870-3-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DAC and ADC path of the codec is independent, have dedicated LRCK (FS)
and BCK for DAC/ADC.
They can be configured to use different format, TDM slots and slot_width if
needed.
Move these parameters under dedicated io_params structure and manage them
independently based on the dai.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190812095226.18870-2-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding DAPM MIC endpoint widget "SoC DMIC" and route, to enable
DMIC DAPM support with hda generic machine.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190809232236.21182-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The hda generic machine actually has dependency on the dmic driver,
select SND_SOC_DMIC at the machine selected to fix it.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190809232236.21182-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The generic machine driver of sof_rt5682
supports more platforms of same product family.
hence match the product family instead of product name.
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190809232236.21182-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
By resetting the cached number of endpoints for all card's widgets we may
overwrite previously cached values for other streams. The situation may
happen especially when running streams simultaneously.
Signed-off-by: Szymon Mielczarek <szymonx.mielczarek@linux.intel.com>
Link: https://lore.kernel.org/r/20190809084034.26220-1-szymonx.mielczarek@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently when loading sof process components there's a check if binary
control data is associated with it. If found the data is extracted to be
part of component loading and initialization. If binary data exceeds the
ipc max size, loading fails with error as large message support is only
implemented in set_get_data method. So make the process loading use
set_get_data to enable large parameters in component initialization.
Also refactor the process component loading function as it digs out 3
times almost identical information of related controls. This is
redundant, looks ugly and makes it difficult to understand the
mechanism. So make a function out of fetching the control data and use
it in process loading.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190809231714.20874-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compatible string for imx6ull, from imx6ull platform,
the issue of channel swap after xrun is fixed in hardware.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/1565346467-5769-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 4dc057a786 ("ASoC: rt5677: remove superfluous set") was an
attempted code cleanup but was incorrectly tested before sent and
actually breaks the interrupt since it never resets the value on each
loop now. The breakage is most testable when hotwording code is added
and also uses the interrupt.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20190809215952.155660-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The ARM w90x900 platform is getting removed, so this driver is obsolete.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20190809202749.742267-9-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
We need add DAPM MIC endpoint widget "SoC DMIC" and route, to enable
DMIC PCM DAPM support.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190809232236.21182-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In snd_hda_parse_generic_codec(), 'spec' is allocated through kzalloc().
Then, the pin widgets in 'codec' are parsed. However, if the parsing
process fails, 'spec' is not deallocated, leading to a memory leak.
To fix the above issue, free 'spec' before returning the error.
Fixes: 352f7f914e ("ALSA: hda - Merge Realtek parser code to generic parser")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
sound/soc/codecs/max9850.c:31:33: warning:
max9850_reg defined but not used [-Wunused-const-variable=]
It is not used since commit 068416620c ("ASoC:
max9850: Convert to direct regmap API usage")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190808143507.66788-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/max98926.c:28:26: warning:
max98926_dai_txt defined but not used [-Wunused-const-variable=]
sound/soc/codecs/max98926.c:23:27: warning:
max98926_boost_current_txt defined but not used [-Wunused-const-variable=]
They are never used, so can be removd.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190808143215.65904-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_soc_dai_link_component to specify aux_dev.
Let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87imr86w96.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_soc_dai_link_component to specify aux_dev.
Let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/87lfw46w9g.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_soc_dai_link_component to specify aux_dev.
Let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/87mugk6w9l.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use snd_soc_dai_link_component to specify aux_dev.
Let's use it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/87o9106w9p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To find aux_dev, ASoC is using .name, codec_name, codec_of_node.
Here, .name is used to fallback in case of no codec.
But, we already have this kind of component finding method by
snd_soc_dai_link_component and soc_find_component().
We shouldn't have duplicated implementation to do same things.
This patch adds snd_soc_dai_link_component support to finding aux_dev.
Now, no driver is using only .name.
All drivers are using codec_name and/or codec_of_node.
This means no driver is finding component from .name so far.
(Actually almost all drivers are using .name as just "device name",
not for finding component...)
This patch
1) add snd_soc_dai_link_component support for aux_dev. legacy style will
be removed if all drivers are switched to new style.
2) try to find component via snd_soc_dai_link_component.
Then, it doesn't try to find via .name, because no driver is using
it so far.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y3046wcf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
hdac_hdmi_present_sense() calls the audio component to get ELD update,
then it reports the jack status change and updates DAPM graph
accordingly. This works when it's called from the normal code paths.
However, it may lead to a dead lock when it's called from the audio
component notifier. Namely, the DAPM update involves with the runtime
PM, and it eventually calls again the audio component get_power()
ops. Since i915 driver already takes a mutex around the audio
component ops calls, we'll eventually get the mutex doubly.
As a workaround, in this patch, only the jack state is updated in the
code path from hdac_hdmi_eld_notify_cb(), and the DAPM update is
deferred to a work so that it's processed in another context.
Reported-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20190809151531.24359-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Lots of small fixes at this time since we've received the ASoC
fix batch now.
- Some coverage in ASoC core mostly for minor issues like NULL
checks for DPCM and proper error handling in DAI instantiation
- A collection of small device-specific changes in various ASoC
codec and platform drivers
- OF-tree refcount fixes in a few ASoC drivers
- Fixes of memory leaks in the error paths of various ASoC / ALSA
drivers
- A workaround for a long-standing issue on AMD HD-audio device
- Updates of MAINTAINERS, mail addresses, file permission fixups
-----BEGIN PGP SIGNATURE-----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=avrM
-----END PGP SIGNATURE-----
Merge tag 'sound-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Lots of small fixes at this time since we've received the ASoC fix
batch now.
- Some coverage in ASoC core mostly for minor issues like NULL checks
for DPCM and proper error handling in DAI instantiation
- A collection of small device-specific changes in various ASoC codec
and platform drivers
- OF-tree refcount fixes in a few ASoC drivers
- Fixes of memory leaks in the error paths of various ASoC / ALSA
drivers
- A workaround for a long-standing issue on AMD HD-audio device
- Updates of MAINTAINERS, mail addresses, file permission fixups"
* tag 'sound-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (38 commits)
ALSA: firewire: fix a memory leak bug
sound: fix a memory leak bug
ALSA: hda - Workaround for crackled sound on AMD controller (1022:1457)
ALSA: hiface: fix multiple memory leak bugs
ALSA: hda - Don't override global PCM hw info flag
ALSA: usb-audio: fix a memory leak bug
ASoC: max98373: Remove executable bits
ASoC: amd: acp3x: use dma address for acp3x dma driver
ASoC: amd: acp3x: use dma_ops of parent device for acp3x dma driver
ASoC: max98373: add 88200 and 96000 sampling rate support
ASoC: sun4i-i2s: Incorrect SR and WSS computation
MAINTAINERS: Update Intel ASoC drivers maintainers
ASoC: ti: davinci-mcasp: Correct slot_width posed constraint
ASoC: rockchip: Fix mono capture
ASoC: Intel: Fix some acpi vs apci typo in somme comments
ASoC: ti: davinci-mcasp: Fix clk PDIR handling for i2s master mode
ASoC: Fail card instantiation if DAI format setup fails
ASoC: SOF: Intel: hda: remove misleading error trace from IRQ thread
ASoC: qcom: apq8016_sbc: Fix oops with multiple DAI links
ASoC: dapm: fix a memory leak bug
...
[ This is rather a revival of the patch Tomas sent in months ago, but
applying only with the quirk model option -- tiwai ]
Hard coded coefficients to make Huawuei Matebook X right speaker
work. The Matebook X has a ALC298, please refer to bug 197801 on
how these numbers were reverse engineered from the Windows driver
The reversed engineered sequence represents a repeating pattern
of verbs, and the only values that are changing periodically are
written on indexes 0x23 and 0x25:
0x500, 0x23
0x400, VALUE1
0x500, 0x25
0x400, VALUE2
* skipped reading sequences (0x500 - 0xc00 sequences are ignored)
* static values from reverse engineering are used
NOTE: since a significant risk is still considered, this is provided
as an experimental fix that isn't applied as default for now. For
enabling the fix, you'll have to choose huawei-mbx-stereo via model
option of snd-hda-intel module.
If we get feedback from users that this works stably, we may apply it
per default.
[ Some coding style fixes and replacement with AC_VERB_* by tiwai ]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197801
Signed-off-by: Tomas Espeleta <tomas.espeleta@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For the sake of debugging, show each response that took too long time
and its corresponding last verb. Since such an error happens in
series once when started, use the ratelimited variant for suppressing
the flood.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Building with SND_SOC_SOF_HDA_AUDIO_CODEC fails:
sound/soc/sof/intel/hda-bus.c: In function sof_hda_bus_init:
sound/soc/sof/intel/hda-bus.c:16:25: error: implicit declaration of function
snd_soc_hdac_hda_get_ops; did you mean snd_soc_jack_add_gpiods? [-Werror=implicit-function-declaration]
#define sof_hda_ext_ops snd_soc_hdac_hda_get_ops()
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Fixes: d4ff1b3917 ("ASoC: SOF: Intel: Initialize hdaudio bus properly")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a lot of duplicate code when processing IPC firmware ready
notification and creating memory windows.
First step in reducing the code duplication is to introduce generic
functions:
* sof_get_windows
* sof_fw_ready
that will replace, in the first step, the specific implementation related
to baytrail related platforms:
* byt_get_windows
* byt_fw_ready
So we are basically moving code from intel/byt.c to loader.c keeping
in mind that mbox_offset is a per platform constant so we need to
use newly introduced snd_sof_dsp_get_mailbox_offset /
snd_sof_dsp_get_window_offset in order to get the correct
mbox offset / window offset value.
Also, bar is a per platform constant so we use snd_sof_dsp_get_bar_index
instead of the hardcoded BYT_DSP_BAR.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190807150203.26359-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This will allow us to export mailbox offset in order to
read the fw_ready message from.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190807150203.26359-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can use generic sof_fw_ready function and reduce code duplication.
Careful here that we need to provide the implementation for
get_mailbox_offset and get_window_offset.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190807150203.26359-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
bdw_get_windows / bdw_fw_ready is identical with the generic
implementation introduced in a previous patch.
So remove bdw_get_windows / bdw_fw_ready and use the generic
sof_get_windows version.
Do not forget to implement get_mailbox_offset/get_window_offset
so that we export the correct mailbox/memory window offset to
the outside world.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190807150203.26359-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is reserved for some historical reason, we didn't enable memory
windows for byt/bdw at the beginning, to make it compatible, we get
those mailbox offsets from fw_ready struct firstly, and then update them
if they existed in the following memory windows, to make sure the
mailbox still can be used if no memory windows are created.
With this change all platforms have the same implementation for
xxx_fw_ready function so that we can refactor it in a common file.
Suggested-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190807150203.26359-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In file included from ./include/sound/tlv.h:10:0,
from sound/soc/codecs/ml26124.c:19:
sound/soc/codecs/ml26124.c:59:35: warning: ngth defined but not used [-Wunused-const-variable=]
static const DECLARE_TLV_DB_SCALE(ngth, -7650, 150, 0);
^
./include/uapi/sound/tlv.h:64:15: note: in definition of macro SNDRV_CTL_TLVD_DECLARE_DB_SCALE
unsigned int name[] = { \
^~~~
sound/soc/codecs/ml26124.c:59:14: note: in expansion of macro DECLARE_TLV_DB_SCALE
static const DECLARE_TLV_DB_SCALE(ngth, -7650, 150, 0);
^~~~~~~~~~~~~~~~~~~~
It is never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190809082440.67412-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/mt6351.c:1070:38: warning:
mt_lineout_control defined but not used [-Wunused-const-variable=]
It is never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190809080234.23332-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Building with SND_SOC_SOF_HDA_AUDIO_CODEC fails:
sound/soc/sof/intel/hda-bus.c: In function sof_hda_bus_init:
sound/soc/sof/intel/hda-bus.c:16:25: error: implicit declaration of function
snd_soc_hdac_hda_get_ops; did you mean snd_soc_jack_add_gpiods? [-Werror=implicit-function-declaration]
#define sof_hda_ext_ops snd_soc_hdac_hda_get_ops()
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Fixes: d4ff1b3917 ('ASoC: SOF: Intel: Initialize hdaudio bus properly")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20190809110100.71236-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/pci/ac97/ac97_codec.c:599:38: warning:
snd_ac97_controls_master_mono defined but not used [-Wunused-const-variable=]
It is never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MSI MPG X570 board is with another AMD HD-audio controller (PCI ID
1022:1487) and it requires the same workaround applied for X370, etc
(PCI ID 1022:1457).
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195303
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
dentry is only used when the flood test is done so move the declaration
of the variable inside the ifdef for the flood test.
Signed-off-by: Mark Brown <broonie@kernel.org>
LARGE_CONFIG_GET is mainly used to retrieve requested module parameters
but it may also carry TX payload with them. Update its implementation to
account for both TX and RX data.
First reply.header carries total payload size within data_off_sizefield.
Make use of reply.header to realloc returned buffer with correct size.
Failure of IPC request is permissive - error-payload may be returned, an
informative data why GET for given param failed - and thus function
should not collapse before entire processing is finished. Caller is
responsible for checking returned payload and bytes parameters.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190808181549.12521-3-cezary.rojewski@intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reply for the very first LARGE_CONFIG_GET request contains total size of
payload to be retrieved by host.
From then on, each subsequent reply carries buffer offset instead. As
looping is not covered by any real-life example, remove it and cleanup
the function for followup overhaul.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20190808181549.12521-2-cezary.rojewski@intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch call snd_jack_add_new_kctl() to create the HDMI jack kctls.
Userspace needs these kctls to detect the hdmi monitor hotplug.
In /usr/share/alsa/ucm, the config file needs to assign a jack kctl to
"JackControl" to let PA get the jack hotplug status.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190808192734.18286-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
