Commit Graph

94 Commits

Author SHA1 Message Date
Danit Goldberg
130c2c576e IB/mlx5: Use the original address for the page during free_pages
The removal of 'buffer' in the patch below caused free_page() to use a
value that had been offset since the wqe pointer is adjusted while the
routine runs.

The current implementation of free_pages() rounds down to a pfn,
discarding the adjustment, but this is not the right way to use the
API. Preserve the initial value and use it for free_page().

Fixes: 0f51427bd0 ("RDMA/mlx5: Cleanup WQE page fault handler")
Link: https://lore.kernel.org/r/20190916064818.19823-2-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-16 13:39:56 -03:00
Jason Gunthorpe
75c66515e4 Merge tag 'v5.3-rc8' into rdma.git for-next
To resolve dependencies in following patches

mlx5_ib.h conflict resolved by keeing both hunks

Linux 5.3-rc8

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13 16:59:51 -03:00
Jason Gunthorpe
a0d8994b30 Merge branch 'mlx5-odp-dc' into rdma.git for-next
Michael Guralnik says:

====================
The series adds support for on-demand paging for DC transport.

As DC is a mlx-only transport, the capabilities are exposed to the user
using DEVX objects and later on through mlx5dv_query_device.
====================

Based on the mlx5-next branch from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for
dependencies

* branch 'mlx5-odp-dc':
  IB/mlx5: Add page fault handler for DC initiator WQE
  IB/mlx5: Remove check of FW capabilities in ODP page fault handling
  net/mlx5: Set ODP capabilities for DC transport to max
2019-08-28 11:25:37 -03:00
Michael Guralnik
75e46fc02c IB/mlx5: Add page fault handler for DC initiator WQE
Parsing DC initiator WQEs upon page fault requires skipping an address
vector segment, as in UD WQEs.

Link: https://lore.kernel.org/r/20190819120815.21225-4-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-28 11:18:40 -03:00
Michael Guralnik
29af94987b IB/mlx5: Remove check of FW capabilities in ODP page fault handling
As page fault handling is initiated by FW, there is no need to check that
the ODP supports the operation and transport.

Link: https://lore.kernel.org/r/20190819120815.21225-3-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-28 11:18:39 -03:00
Jason Gunthorpe
868df536f5 Merge branch 'odp_fixes' into rdma.git for-next
Jason Gunthorpe says:

====================
This is a collection of general cleanups for ODP to clarify some of the
flows around umem creation and use of the interval tree.
====================

The branch is based on v5.3-rc5 due to dependencies

* odp_fixes:
  RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
  RDMA/mlx5: Use ib_umem_start instead of umem.address
  RDMA/core: Make invalidate_range a device operation
  RDMA/odp: Use kvcalloc for the dma_list and page_list
  RDMA/odp: Check for overflow when computing the umem_odp end
  RDMA/odp: Provide ib_umem_odp_release() to undo the allocs
  RDMA/odp: Split creating a umem_odp from ib_umem_get
  RDMA/odp: Make the three ways to create a umem_odp clear
  RMDA/odp: Consolidate umem_odp initialization
  RDMA/odp: Make it clearer when a umem is an implicit ODP umem
  RDMA/odp: Iterate over the whole rbtree directly
  RDMA/odp: Use the common interval tree library instead of generic
  RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 14:10:36 -03:00
Jason Gunthorpe
fba0e448a2 RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
These are the same thing since mr always comes from odp->private. It is
confusing to reference the same memory via two names.

Link: https://lore.kernel.org/r/20190819111710.18440-13-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 14:08:43 -03:00
Jason Gunthorpe
a705f3e3a1 RDMA/mlx5: Use ib_umem_start instead of umem.address
These are subtly different, the address is the original VA requested
during umem_get, while ib_umem_start() is the version that is rounded to
the proper page size, ie is the true start of the umem's dma map.

Link: https://lore.kernel.org/r/20190819111710.18440-12-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 14:08:43 -03:00
Moni Shoua
ce51346fee RDMA/core: Make invalidate_range a device operation
The callback function 'invalidate_range' is implemented in a driver so the
place for it is in the ib_device_ops structure and not in ib_ucontext.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Link: https://lore.kernel.org/r/20190819111710.18440-11-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 14:08:43 -03:00
Jason Gunthorpe
0446cad9ca RDMA/odp: Provide ib_umem_odp_release() to undo the allocs
Now that there are allocator APIs that return the ib_umem_odp directly
it should be freed through a umem_odp free'er as well.

Link: https://lore.kernel.org/r/20190819111710.18440-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 14:08:42 -03:00
Jason Gunthorpe
f20bef6a95 RDMA/odp: Make the three ways to create a umem_odp clear
The three paths to build the umem_odps are kind of muddled, they are:
- As a normal ib_mr umem
- As a child in an implicit ODP umem tree
- As the root of an implicit ODP umem tree

Only the first two are actually umem's, the last is an abuse.

The implicit case can only be triggered by explicit driver request, it
should never be co-mingled with the normal case. While we are here, make
sensible function names and add some comments to make this clearer.

Link: https://lore.kernel.org/r/20190819111710.18440-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 14:08:42 -03:00
Jason Gunthorpe
fd7dbf035e RDMA/odp: Make it clearer when a umem is an implicit ODP umem
Implicit ODP umems are special, they don't have any page lists, they don't
exist in the interval tree and they are never DMA mapped.

Instead of trying to guess this based on a zero length use an explicit
flag.

Further, do not allow non-implicit umems to be 0 size.

Link: https://lore.kernel.org/r/20190819111710.18440-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 14:08:42 -03:00
Jason Gunthorpe
f993de88a5 RDMA/odp: Iterate over the whole rbtree directly
Instead of intersecting a full interval, just iterate over every element
directly. This is faster and clearer.

Link: https://lore.kernel.org/r/20190819111710.18440-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 14:08:24 -03:00
Moni Shoua
008157528a IB/mlx5: Report and handle ODP support properly
ODP depends on the several device capabilities, among them is the ability
to send UMR WQEs with that modify atomic and entity size of the MR.
Therefore, only if all conditions to send such a UMR WQE are met then
driver can report that ODP is supported. Use this check of conditions
in all places where driver needs to know about ODP support.

Also, implicit ODP support depends on ability of driver to send UMR WQEs
for an indirect mkey. Therefore, verify that all conditions to do so are
met when reporting support.

Fixes: c8d75a980f ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-7-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20 13:44:45 -04:00
Yishai Hadas
f591822c3c IB/mlx5: Fix implicit MR release flow
Once implicit MR is being called to be released by
ib_umem_notifier_release() its leaves were marked as "dying".

However, when dereg_mr()->mlx5_ib_free_implicit_mr()->mr_leaf_free() is
called, it skips running the mr_leaf_free_action (i.e. umem_odp->work)
when those leaves were marked as "dying".

As such ib_umem_release() for the leaves won't be called and their MRs
will be leaked as well.

When an application exits/killed without calling dereg_mr we might hit the
above flow.

This fatal scenario is reported by WARN_ON() upon
mlx5_ib_dealloc_ucontext() as ibcontext->per_mm_list is not empty, the
call trace can be seen below.

Originally the "dying" mark as part of ib_umem_notifier_release() was
introduced to prevent pagefault_mr() from returning a success response
once this happened. However, we already have today the completion
mechanism so no need for that in those flows any more.  Even in case a
success response will be returned the firmware will not find the pages and
an error will be returned in the following call as a released mm will
cause ib_umem_odp_map_dma_pages() to permanently fail mmget_not_zero().

Fix the above issue by dropping the "dying" from the above flows.  The
other flows that are using "dying" are still needed it for their
synchronization purposes.

   WARNING: CPU: 1 PID: 7218 at
   drivers/infiniband/hw/mlx5/main.c:2004
		  mlx5_ib_dealloc_ucontext+0x84/0x90 [mlx5_ib]
   CPU: 1 PID: 7218 Comm: ibv_rc_pingpong Tainted: G     E
	       5.2.0-rc6+ #13
   Call Trace:
   uverbs_destroy_ufile_hw+0xb5/0x120 [ib_uverbs]
   ib_uverbs_close+0x1f/0x80 [ib_uverbs]
   __fput+0xbe/0x250
   task_work_run+0x88/0xa0
   do_exit+0x2cb/0xc30
   ? __fput+0x14b/0x250
   do_group_exit+0x39/0xb0
   get_signal+0x191/0x920
   ? _raw_spin_unlock_bh+0xa/0x20
   ? inet_csk_accept+0x229/0x2f0
   do_signal+0x36/0x5e0
   ? put_unused_fd+0x5b/0x70
   ? __sys_accept4+0x1a6/0x1e0
   ? inet_hash+0x35/0x40
   ? release_sock+0x43/0x90
   ? _raw_spin_unlock_bh+0xa/0x20
   ? inet_listen+0x9f/0x120
   exit_to_usermode_loop+0x5c/0xc6
   do_syscall_64+0x182/0x1b0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 81713d3788 ("IB/mlx5: Add implicit MR support")
Link: https://lore.kernel.org/r/20190805083010.21777-1-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-07 15:36:43 -03:00
Leon Romanovsky
d129e3f422 RDMA/mlx5: Remove DEBUG ODP code
Delete DEBUG ODP dead code which is leftover from development
stage and doesn't need to be part of the upstream kernel.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731115627.5433-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-07-31 15:02:02 -04:00
Moni Shoua
296e3a2aad IB/mlx5: Prevent concurrent MR updates during invalidation
The device requires that memory registration work requests that update the
address translation table of a MR will be fenced if posted together.  This
scenario can happen when address ranges are invalidated by the mmu in
separate concurrent calls to the invalidation callback.

We prefer to block concurrent address updates for a single MR over fencing
since making the decision if a WQE needs fencing will be more expensive
and fencing all WQEs is a too radical choice.

Further, it isn't clear that this code can even run safely concurrently,
so a lock is a safer choice.

Fixes: b4cfe447d4 ("IB/mlx5: Implement on demand paging by adding support for MMU notifiers")
Link: https://lore.kernel.org/r/20190723065733.4899-8-leon@kernel.org
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-25 11:39:38 -03:00
Chuhong Yuan
b7f406bb88 IB/mlx5: Replace kfree with kvfree
Memory allocated by kvzalloc should not be freed by kfree(), use kvfree()
instead.

Fixes: 813e90b1ae ("IB/mlx5: Add advise_mr() support")
Link: https://lore.kernel.org/r/20190717082101.14196-1-hslester96@gmail.com
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-22 15:19:40 -03:00
Jason Gunthorpe
69ea0582f3 Merge mlx5-next into rdma for-next
From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux

Required for dependencies in the next patches.

Resolved the conflicts:
 - esw_destroy_offloads_acl_tables() use the newer mlx5_esw_for_all_vports()
   version
 - esw_offloads_steering_init() drop the cap test
 - esw_offloads_init() drop the extra function arguments

* branch 'mlx5-next': (39 commits)
  net/mlx5: Expose device definitions for object events
  net/mlx5: Report EQE data upon CQ completion
  net/mlx5: Report a CQ error event only when a handler was set
  net/mlx5: mlx5_core_create_cq() enhancements
  net/mlx5: Expose the API to register for ANY event
  net/mlx5: Use event mask based on device capabilities
  net/mlx5: Fix mlx5_core_destroy_cq() error flow
  net/mlx5: E-Switch, Handle UC address change in switchdev mode
  net/mlx5: E-Switch, Consider host PF for inline mode and vlan pop
  net/mlx5: E-Switch, Use iterator for vlan and min-inline setups
  net/mlx5: E-Switch, Reg/unreg function changed event at correct stage
  net/mlx5: E-Switch, Consolidate eswitch function number of VFs
  net/mlx5: E-Switch, Refactor eswitch SR-IOV interface
  net/mlx5: Handle host PF vport mac/guid for ECPF
  net/mlx5: E-Switch, Use correct flags when configuring vlan
  net/mlx5: Reduce dependency on enabled_vfs counter and num_vfs
  net/mlx5: Don't handle VF func change if host PF is disabled
  net/mlx5: Limit scope of mlx5_get_next_phys_dev() to PCI PF devices
  net/mlx5: Move pci status reg access mutex to mlx5_pci_init
  net/mlx5: Rename mlx5_pci_dev_type to mlx5_coredev_type
  ...

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-03 16:50:26 -03:00
Yishai Hadas
b9a7ba5562 net/mlx5: Use event mask based on device capabilities
Use the reported device capabilities for the supported user events (i.e.
affiliated and un-affiliated) to set the EQ mask.

As the event mask can be up to 256 defined by 4 entries of u64 change
the applicable code to work accordingly.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-07-03 20:55:45 +03:00
Matthew Wilcox
792c4e9d0b net/mlx5: Convert mkey_table to XArray
The lock protecting the data structure does not need to be an rwlock.  The
only read access to the lock is in an error path, and if that's limiting
your scalability, you have bigger performance problems.

Eliminate mlx5_mkey_table in favour of using the xarray directly.
reg_mr_callback must use GFP_ATOMIC for allocating XArray nodes as it may
be called in interrupt context.

This also fixes a minor bug where SRCU locking was being used on the radix
tree read side, when RCU was needed too.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-24 16:44:40 -07:00
Doug Ledford
12dbc04db0 Merge remote-tracking branch 'mlx5-next/mlx5-next' into HEAD
Take mlx5-next so we can take a dependent two patch series next.

Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-18 22:44:36 -04:00
Yuval Avnery
1f8a7bee27 net/mlx5: Add EQ enable/disable API
Previously, EQ joined the chain notifier on creation.
This forced the caller to be ready to handle events before creating
the EQ through eq_create_generic interface.

To help the caller control when the created EQ will be attached to the
IRQ, add enable/disable API.

Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13 10:59:49 -07:00
Ariel Levkovich
81bfa20603 net/mlx5: Use a single IRQ for all async EQs
The patch modifies the IRQ allocation so that all async EQs are
assigned to the same IRQ resulting in more available IRQs for
completion EQs.

The changes are using the support for IRQ sharing and EQ polling budget
that was introduced in previous patches so when the shared interrupt is
triggered, the kernel will serially call the handler of each of the
sharing EQs with a certain budget of EQEs to poll in order to prevent
starvation.

Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13 10:59:49 -07:00
Yuval Avnery
24163189da net/mlx5: Separate IRQ request/free from EQ life cycle
Instead of requesting IRQ with eq creation, IRQs will be requested
before EQ table creation.
Instead of freeing the IRQs after EQ destroy, free IRQs after eq
table destroy.

Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13 10:59:49 -07:00
Yuval Avnery
ca390799c2 net/mlx5: Change interrupt handler to call chain notifier
Multiple EQs may share the same IRQ in subsequent patches.

Instead of calling the IRQ handler directly, the EQ will register
to an atomic chain notfier.

The Linux built-in shared IRQ is not used because it forces the caller
to disable the IRQ and clear affinity before free_irq() can be called.

This patch is the first step in the separation of IRQ and EQ logic.

Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-06-13 10:59:49 -07:00
Jason Gunthorpe
d2183c6f19 RDMA/umem: Move page_shift from ib_umem to ib_odp_umem
This value has always been set to PAGE_SHIFT in the core code, the only
thing that does differently was the ODP path. Move the value into the ODP
struct and still use it for ODP, but change all the non-ODP things to just
use PAGE_SHIFT/PAGE_SIZE/PAGE_MASK directly.

Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-05-21 15:23:24 -03:00
Shiraz Saleem
d10bcf947a RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs
Combine contiguous regions of PAGE_SIZE pages into single scatter list
entry while building the scatter table for a umem. This minimizes the
number of the entries in the scatter list and reduces the DMA mapping
overhead, particularly with the IOMMU.

Set default max_seg_size in core for IB devices to 2G and do not combine
if we exceed this limit.

Also, purge npages in struct ib_umem as we now DMA map the umem SGL with
sg_nents and npage computation is not needed. Drivers should now be using
ib_umem_num_pages(), so fix the last stragglers.

Move npages tracking to ib_umem_odp as ODP drivers still need it.

Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Tested-by: Gal Pressman <galpress@amazon.com>
Tested-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08 13:05:24 -03:00
Leon Romanovsky
0f51427bd0 RDMA/mlx5: Cleanup WQE page fault handler
Refactor the page fault handler to be more readable and extensible, this
cleanup was triggered by the error reported below. The code structure made
it unclear to the automatic tools to identify that such a flow is not
possible in real life because "requestor != NULL" means that "qp != NULL"
too.

    drivers/infiniband/hw/mlx5/odp.c:1254 mlx5_ib_mr_wqe_pfault_handler()
    error: we previously assumed 'qp' could be null (see line 1230)

Fixes: 08100fad5c ("IB/mlx5: Add ODP SRQ support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-04 08:28:59 -03:00
Jason Gunthorpe
1c726c4421 Merge HFI1 updates into k.o/for-next
Based on rdma.git for-rc for dependencies.

From Dennis Dalessandro:

====================

Here are some code improvement patches and fixes for less serious bugs to
TID RDMA than we sent for RC.

====================

* HFI1 updates:
  IB/hfi1: Implement CCA for TID RDMA protocol
  IB/hfi1: Remove WARN_ON when freeing expected receive groups
  IB/hfi1: Unify the software PSN check for TID RDMA READ/WRITE
  IB/hfi1: Add a function to read next expected psn from hardware flow
  IB/hfi1: Delay the release of destination mr for TID RDMA WRITE DATA

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-03 15:28:05 -03:00
Artemy Kovalyov
d623dfd283 IB/mlx5: Compare only index part of a memory window rkey
The InfiniBand Architecture Specification section 10.6.7.2.4 TYPE 2 MEMORY
WINDOWS says that if the CI supports the Base Memory Management Extensions
defined in this specification, the R_Key format for a Type 2 Memory Window
must consist of:

* 24 bit index in the most significant bits of the R_Key, which is owned
  by the CI, and
* 8 bit key in the least significant bits of the R_Key, which is owned by
  the Consumer.

This means that the kernel should compare only the index part of a R_Key
to determine equality with another R_Key.

Fixes: db570d7dea ("IB/mlx5: Add ODP support to MW")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 15:27:56 -03:00
Moni Shoua
1abe186ed8 IB/mlx5: Reset access mask when looping inside page fault handler
If page-fault handler spans multiple MRs then the access mask needs to
be reset before each MR handling or otherwise write access will be
granted to mapped pages instead of read-only.

Cc: <stable@vger.kernel.org> # 3.19
Fixes: 7bdf65d411 ("IB/mlx5: Handle page faults")
Reported-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27 15:27:11 -03:00
Moni Shoua
7095ec3ca0 IB/mlx5: Set correct write permissions for implicit ODP MR
The write access of an implicit MR is inherited to all of its children.
Therefore we must set the correct write access to the parent MR.

Pass full access_flags when creating umem to let it calculate write access
correctly.

Fixes: da6a496a34 ("IB/mlx5: Ranges in implicit ODP MR inherit its write access")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-04 10:57:19 -04:00
Moni Shoua
81dd4c4be3 IB/mlx5: Validate correct PD before prefetch MR
When prefetching odp mr it is required to verify that pd of the mr is
identical to the pd for which the advise_mr request arrived with.

This check was missing from synchronous flow and is added now.

Fixes: 813e90b1ae ("IB/mlx5: Add advise_mr() support")
Reported-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-21 16:32:45 -07:00
Moni Shoua
a6bc3875f1 IB/mlx5: Protect against prefetch of invalid MR
When deferring a prefetch request we need to protect against MR or PD
being destroyed while the request is still enqueued.

The first step is to validate that PD owns the lkey that describes the MR
and that the MR that the lkey refers to is owned by that PD.

The second step is to dequeue all requests when MR is destroyed.

Since PD can't be destroyed while it owns MRs it is guaranteed that when a
worker wakes up the request it refers to is still valid.

Now, it is possible to refrain from taking a reference on the device since
it is assured to be present as pd.

While that, replace the dedicated ordered workqueue with the system
unbound workqueue to reuse an existing resource and improve
performance. This will also fix a bug of queueing to the wrong workqueue.

Fixes: 813e90b1ae ("IB/mlx5: Add advise_mr() support")
Reported-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-21 16:32:45 -07:00
Jason Gunthorpe
6a8a2aa62d Linux 5.0-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxXYaEeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGkSQH/2yrfnviNPFYpZOR
 QQdc71Bfhkd8m85SmWIsSebkxmi3hKFVj15sGbWXd6+0/VxjEEGvQCZpvVwJceke
 LwDxtkKGg/74wAqJvlSAWxFNZ+Had4jDeoSoeQChddsBVXBBCxQx2v6ECg3o2x7W
 k8Z8t4+3RijDf8fYXY9ETyO2zW8R/wgT+dnl+DPgUH7u4dxh7FzAUfc4bgZIDg+i
 FzBQfbTJuz4BU7uRZ9IJiwhWKv0Iyi2DR3BY8Z1pqEpRaUMJMrCs2WGytHbTgt9e
 0EtO1airbVneU4eumU/ZaF9cyEbah9HousEPnP7J09WG4s/Odxc4zE+uK1QqS2im
 5Xv88is=
 =dVd1
 -----END PGP SIGNATURE-----

Merge tag 'v5.0-rc5' into rdma.git for-next

Linux 5.0-rc5

Needed to merge the include/uapi changes so we have an up to date
single-tree for these files. Patches already posted are also expected to
need this for dependencies.
2019-02-04 14:53:42 -07:00
Moni Shoua
6141f8fa5b IB/mlx5: Advertise XRC ODP support
Query all per transport caps for XRC and set the appropriate bits in the
per transport field of the advertised struct.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-04 14:34:07 -07:00
Moni Shoua
2e68daceac IB/mlx5: Advertise SRQ ODP support for supported transports
ODP support in SRQ is per transport capability. Based on device
capabilities set this flag in device structure for future queries.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-04 14:34:07 -07:00
Moni Shoua
08100fad5c IB/mlx5: Add ODP SRQ support
Add changes to the WQE page-fault handler to

1. Identify that the event is for a SRQ WQE
2. Pass SRQ object instead of a QP to the function that reads the WQE
3. Parse the SRQ WQE with respect to its structure

The rest is handled as for regular RQ WQE.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-04 14:34:07 -07:00
Moni Shoua
fbeb4075c6 IB/mlx5: Let read user wqe also from SRQ buffer
Reading a WQE from SRQ is almost identical to reading from regular RQ.
The differences are the size of the queue, the size of a WQE and buffer
location.

Make necessary changes to mlx5_ib_read_user_wqe() to let it read a WQE
from a SRQ or RQ by caller choice.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-04 14:34:07 -07:00
Moni Shoua
29917f4750 IB/mlx5: Add XRC initiator ODP support
Skip XRC segment in the beginning of a send WQE and fetch ODP XRC
capabilities when QP type is IB_QPT_XRC_INI. The rest of the handling is
the same as in RC QP.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-04 14:34:07 -07:00
Moni Shoua
6ff7414a17 IB/mlx5: Clean mlx5_ib_mr_responder_pfault_handler() signature
In the function mlx5_ib_mr_responder_pfault_handler()

1. The parameter wqe is used as read-only so there is no need to pass it
   by reference.
2. Remove the unused argument pfault from list of arguments.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-04 14:34:06 -07:00
Moni Shoua
586f4e95c7 IB/mlx5: Remove useless check in ODP handler
When handling an ODP event for a receive WQE in SRQ the target QP is
unknown. Therefore, it is wrong to ask if QP has a SRQ in the page-fault
handler.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-04 14:34:06 -07:00
Moni Shoua
10f56242e3 IB/mlx5: Fix the locking of SRQ objects in ODP events
QP and SRQ objects are stored in different containers so the action to get
and lock a common resource during ODP event needs to address that.

While here get rid of 'refcount' and 'free' fields in mlx5_core_srq struct
and use the fields with same semantics in common structure.

Fixes: 032080ab43 ("IB/mlx5: Lock QP during page fault handling")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-04 14:34:06 -07:00
Moni Shoua
da6a496a34 IB/mlx5: Ranges in implicit ODP MR inherit its write access
A sub-range in ODP implicit MR should take its write permission from the
MR and not be set always to allow.

Fixes: d07d1d70ce ("IB/umem: Update on demand page (ODP) support")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-24 09:22:30 -07:00
Bart Van Assche
0a353c2e94 IB/mlx5: Declare local functions 'static'
This patch avoids that sparse complains about missing function
declarations.

Fixes: c9990ab39b ("RDMA/umem: Move all the ODP related stuff out of ucontext and into per_mm")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-24 09:22:30 -07:00
Yishai Hadas
414556af5f IB/mlx5: Add support for ODP for DEVX indirection mkey
Add support for ODP for DEVX indirection mkey, it includes:
- Recognizing its type as part of the radix tree lookup.
- Use similar flow as done for the MW MKEY type.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-21 20:06:49 -07:00
Jason Gunthorpe
951d01b96f IB/mlx5: Fix how advise_mr() launches async work
Work must hold a kref on the ib_device otherwise the dev pointer can
become free before the work runs. This can happen because the work is
being pushed onto the system work queue which is not flushed during driver
unregister.

Remove the bogus use of 'reg_state':
 - While in uverbs the reg_state is guaranteed to always be
   REGISTERED
 - Testing reg_state with no locking is bogus. Use ib_device_try_get()
   to get back into a region that prevents unregistration.

For now continue with a flow that is similar to the existing code.

Fixes: 813e90b1ae ("IB/mlx5: Add advise_mr() support")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
2019-01-21 14:39:29 -07:00
Jason Gunthorpe
b0ea0fa543 IB/{core,hw}: Have ib_umem_get extract the ib_ucontext from ib_udata
ib_umem_get() can only be called in a method callback, which always has a
udata parameter. This allows ib_umem_get() to derive the ucontext pointer
directly from the udata without requiring the drivers to find it in some
way or another.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
2019-01-10 17:07:45 -07:00
Leon Romanovsky
8b4d5bc5cf RDMA/mlx5: Introduce and reuse helper to identify ODP MR
Consolidate various checks if MR is ODP backed to one simple helper and
update call sites to use it.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-08 16:41:38 -07:00