Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.
If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for audio-graph-card for codec.
[current]
struct snd_soc_dai_link {
...
*cpu_name;
*cpu_of_node;
*cpu_dai_name;
*codec_name;
*codec_of_node;
*codec_dai_name;
*codecs;
num_codecs;
*platform_name;
*platform_of_node;
...
}
[in the future]
struct snd_soc_dai_link {
...
*cpus
num_cpus;
*codecs;
num_codecs;
*platform;
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.
If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for simple-scu-card for codec.
[current]
struct snd_soc_dai_link {
...
*cpu_name;
*cpu_of_node;
*cpu_dai_name;
*codec_name;
*codec_of_node;
*codec_dai_name;
*codecs;
num_codecs;
*platform_name;
*platform_of_node;
...
}
[in the future]
struct snd_soc_dai_link {
...
*cpus
num_cpus;
*codecs;
num_codecs;
*platform;
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-card and simple-scu-card are very similar driver,
but using different feature. Thus we are keeping synchronization
on these 2 drivers style, because it is easy to confirm / check.
Current big difference between these 2 drivers are "dai_props" on
simple_card_data (= priv).
It will be difficult to keep synchronize if we will add new feature
on simple-scu-card. Thus, this patch synchronize it.
[simple]
struct simple_card_data {
...
struct simple_dai_props {
...
} *dai_props;
...
};
[simple scu]
struct simple_card_data {
...
struct asoc_simple_dai *dai_props;
...
};
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.
If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for simple-card for codec.
[current]
struct snd_soc_dai_link {
...
*cpu_name;
*cpu_of_node;
*cpu_dai_name;
*codec_name;
*codec_of_node;
*codec_dai_name;
*codecs;
num_codecs;
*platform_name;
*platform_of_node;
...
}
[in the future]
struct snd_soc_dai_link {
...
*cpus
num_cpus;
*codecs;
num_codecs;
*platform;
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC is supporting snd_soc_dai_link_component for binding,
it is more useful than current legacy style.
Currently only codec is supporting it as multicodec (= codecs).
CPU will support multi style in the future.
We want to have it on Platform too in the future.
If all Codec/CPU/Platform are replaced into snd_soc_dai_link_component
style, we can remove legacy complex style.
This patch supports snd_soc_dai_link_component style
for simple_card_utils for codec.
[current]
struct snd_soc_dai_link {
...
*cpu_name;
*cpu_of_node;
*cpu_dai_name;
*codec_name;
*codec_of_node;
*codec_dai_name;
*codecs;
num_codecs;
*platform_name;
*platform_of_node;
...
}
[in the future]
struct snd_soc_dai_link {
...
*cpus
num_cpus;
*codecs;
num_codecs;
*platform;
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a S/PDIF enable switch as a SOC_SINGLE.
Signed-off-by: Matt Flax <flatmax@flatmax.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs4265 uses 32 bit transport on the I2S bus. This patch enables native
32 bit mode for machine drivers which use this sound card driver.
Signed-off-by: Matt Flax <flatmax@flatmax.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The cs4265 driver declares the "MMTLR Data Switch" register setting with
a 0 register value rather then the 0x12 register (CS4265_SPDIF_CTL2).
This incorrect value causes alsamixer to fault with the output :
cannot load mixer controls: Input/output error
This patch corrects the register value. alsamixer now runs.
Signed-off-by: Matt Flax <flatmax@flatmax.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Unlike the TAS5720, the TAS5722 can be configured to utilize 16-bit wide
slots in TDM mode. This can help easing audio clocking/frequency
requirements.
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The TAS5722 supports modifying volume in 0.25dB steps (as opposed to
0.5dB steps on the TAS5720). Introduce a custom mixer control that
allows taking advantage of this finer output volume granularity.
Also add custom getters/setters for access as the TAS5722 digital volume
controls are split over two registers.
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
McASP have write and read FIFO, each 64 words deep.
From the WFIFOS/RFIFOS registers we can read the amount of data currently
in the FIFO which can be directly reported as delay.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add pdm input driver for the device found on the amlogic AXG SoC family
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Before this patch the only alias provided by the dmic module is:
alias: platform:dmic-codec
Device instantiated from DT will not probe automatically with this
After this patch, here is the new alias list:
alias: platform:dmic-codec
alias: of:N*T*Cdmic-codecC*
alias: of:N*T*Cdmic-codec
Now the dmic codec probes automatically when instantiated from DT.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Kconfig prompt for the generic digital mic to make it configurable
through menuconfig
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
adau17x1_setup_firmware and adau17x1_has_dsp is only used internally, so
making them static instead of exported.
Signed-off-by: Robert Rosengren <robertr@axis.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Modified some if-statements to make them more clear
Signed-off-by: Kirill Marinushkin <kmarinushkin@birdec.tech>
Signed-off-by: Mark Brown <broonie@kernel.org>
Modified the complete file comments in C++ style, to make them look more
intentional
Signed-off-by: Kirill Marinushkin <kmarinushkin@birdec.tech>
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert to // comments in the leading comment, drop the boilerplate
license text and use the correct MODULE_LICENSE.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Mark Brown <broonie@kernel.org>
25Mhz MCLK which was earlier used was of spread type.
Thus, we were not getting accurate rate. The 48Mhz system
clk is of non-spread type and we are changing to it to get
accurate rate.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
We support dual channel, 48Khz. This constraint was set only for
da7219. It is being extended to DMIC and MAX98357a.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit adds support for TI PCM3060 CODEC.
The technical documentation is available at [1].
[1] http://ti.com/product/pcm3060
Signed-off-by: Kirill Marinushkin <kmarinushkin@birdec.tech>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: M R Swami Reddy <mr.swami.reddy@ti.com>
Cc: Vishwas A Deshpande <vishwas.a.deshpande@ti.com>
Cc: Kevin Cernekee <cernekee@chromium.org>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Having the headset buttons send BTN_0, BTN_1 and BTN_2 events is not
really useful. Add mappings to PLAYPAUSE VOLUME_UP and VOLUME_DOWN like
we do in other Intel machine drivers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Thinkpad 8 tablet uses 10EC5640 as ACPI HID, but it has a rt5670 codec
add a quirk for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Thinkpad 8 needs a quirk for jack-detect and the internal mic to
work correctly.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Safeload support has been implemented which is used
when updating for instance filter parameters using
alsa controls. Without safeload support audio can
become distorted during update.
Signed-off-by: Danny Smith <dannys@axis.com>
Signed-off-by: Robert Rosengren <robertr@axis.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a kernel module which is used by the legacy HDA
codec drivers as library. This implements hdac_ext_bus_ops to enable
the reuse of legacy HDA codec drivers with ASoC platform drivers.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Use hda_bus instead of hdac_bus in the SKL ASoC platform driver to enable
reuse of legacy HDA codec drivers.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for HDA BE DAIs in SKL platform driver.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When no I2S based codec entries are found in the BIOS, check if there are
any HDA codecs detected on the bus. Based on the number of codecs found
take appropriate action in machine driver. If there are two HDA codecs
i.e. iDisp + HDA found on the bus, register DAIs and DAI links for both.
If only one codec i.e. iDisp is found then load only iDisp machine driver.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add machine driver for Intel platforms (SKL/KBL/BXT/APL) with
HDA and iDisp codecs. This patch adds support for only iDisp (HDMI/DP)
codec. In the following patches support for HDA codecs will be added.
This should work for other Intel platforms as well e.g. GLK,CNL
however this series is not tested on all the platforms.
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Expose a table containing machine driver information for HDAudio-based
platforms handled by ASoC on Intel hardware.
We only set constant values that are valid across multiple
platforms. The firmware name used by the DSP will be set dynamically
for each platform.
The table is made of a single entry for now, if we need more
complicated set-up where HDAudio is mixed with ACPI-enumerated devices
(I2C, SoundWire) then we'd expect the differentiation to be handled
through information provided by the BIOS (as done for KBL
Chromebooks).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
New calibration sequence allows rt5682 do calibration without
MCLK.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Restrict the formats possible on the TDM interface depending on the width
of the TDM slot and let dpcm merging do the rest.
Fixes: d60e4f1e4b ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Return value of request_irq() was irgnored. Fix this and report
the failure if any
Fixes: 6dc4fa179f ("ASoC: meson: add axg fifo base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add audio clock controller and ARB reset controller module
implication for the device using them
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If the CPU DAI does not initialise rate_max, say if using
using KNOT or CONTINUOUS, then the rate_max field will be
initialised to 0. A value of zero in the rate_max field of
the hardware runtime will cause the sound card to support no
sample rates at all. Obviously this is not desired, just a
different mechanism is being used to apply the constraints. As
such update the setting of rate_max in dpcm_init_runtime_hw
to be consistent with the non-DPCM cases and set rate_max to
UINT_MAX if nothing is defined on the CPU DAI.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_pinctrl_get will only return NULL in the case that pinctrl
is not built into the kernel and all the pinctrl functions used
by the DAPM core are appropriately stubbed for that case. There
is no need to error out of snd_soc_dapm_new_control_unlocked
if pinctrl isn't built into the kernel, so change the
IS_ERR_OR_NULL to just an IS_ERR.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The clock code now has stub functions defined in its header files so
the ifdefs around clocking code should no longer be necessary.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Also add these typos to spelling.txt so checkpatch.pl will look for them.
Link: http://lkml.kernel.org/r/88af06b9de34d870cb0afc46cfd24e0458be2575.1529471371.git.fthain@telegraphics.com.au
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This round brings couple of framework changes, a new driver and usual driver
updates:
- New managed helper for dmaengine framework registration
- Split dmaengine pause capability to pause and resume and allow drivers to
report that individually
- Update dma_request_chan_by_mask() to handle deferred probing
- Move imx-sdma to use virt-dma
- New driver for Actions Semi Owl family S900 controller
- Minor updates to intel, renesas, mv_xor, pl330 etc
-----BEGIN PGP SIGNATURE-----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=kbCC
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull DMAengine updates from Vinod Koul:
"This round brings couple of framework changes, a new driver and usual
driver updates:
- new managed helper for dmaengine framework registration
- split dmaengine pause capability to pause and resume and allow
drivers to report that individually
- update dma_request_chan_by_mask() to handle deferred probing
- move imx-sdma to use virt-dma
- new driver for Actions Semi Owl family S900 controller
- minor updates to intel, renesas, mv_xor, pl330 etc"
* tag 'dmaengine-4.19-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits)
dmaengine: Add Actions Semi Owl family S900 DMA driver
dt-bindings: dmaengine: Add binding for Actions Semi Owl SoCs
dmaengine: sh: rcar-dmac: Should not stop the DMAC by rcar_dmac_sync_tcr()
dmaengine: mic_x100_dma: use the new helper to simplify the code
dmaengine: add a new helper dmaenginem_async_device_register
dmaengine: imx-sdma: add memcpy interface
dmaengine: imx-sdma: add SDMA_BD_MAX_CNT to replace '0xffff'
dmaengine: dma_request_chan_by_mask() to handle deferred probing
dmaengine: pl330: fix irq race with terminate_all
dmaengine: Revert "dmaengine: mv_xor_v2: enable COMPILE_TEST"
dmaengine: mv_xor_v2: use {lower,upper}_32_bits to configure HW descriptor address
dmaengine: mv_xor_v2: enable COMPILE_TEST
dmaengine: mv_xor_v2: move unmap to before callback
dmaengine: mv_xor_v2: convert callback to helper function
dmaengine: mv_xor_v2: kill the tasklets upon exit
dmaengine: mv_xor_v2: explicitly freeup irq
dmaengine: sh: rcar-dmac: Add dma_pause operation
dmaengine: sh: rcar-dmac: add a new function to clear CHCR.DE with barrier
dmaengine: idma64: Support dmaengine_terminate_sync()
dmaengine: hsu: Support dmaengine_terminate_sync()
...
After our evaluation, we need to modify the default values to make sure
the volume applied immediately.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit a655de808c ("ASoC: core: Allow topology to override
machine driver FE DAI link config.") caused soc_dai_hw_params to
be come dependent on the substream private_data being set with
a pointer to the snd_soc_pcm_runtime. Currently, CODEC to CODEC
links don't set this, which causes a NULL pointer dereference:
[<4069de54>] (soc_dai_hw_params) from
[<40694b68>] (snd_soc_dai_link_event+0x1a0/0x380)
Since the ASoC core in general assumes that the substream
private_data will be set to a pointer to the snd_soc_pcm_runtime,
update the CODEC to CODEC links to respect this.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cold reboot stress test found that the hda irq could access rirb ring
buffer before its memory gets allocated which resulting in null
pointer dereference inside snd_hdac_bus_update_rirb().
Fix it by moving the skl_acquire_irq after ring buffer allocation.
While here, also change err return from -EBUSY to actual error code.
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 143b44845d ("ASoC: wm9712: replace codec to component")
"wm9712-codec" got renamed to "wm9712-component", however, this change
never got propagated down to the actual board/platform drivers. E.g. on
Colibri T20 this lead to the following spew upon boot with sound/touch
being broken:
[ 2.214121] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered
[ 2.222137] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517)
...
[ 2.344384] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered
[ 2.351885] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517)
...
[ 2.668339] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered
[ 2.675811] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517)
...
[ 3.208408] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered
[ 3.216312] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517)
...
[ 3.235397] tegra-snd-wm9712 sound: ASoC: CODEC DAI wm9712-hifi not registered
[ 3.248938] tegra-snd-wm9712 sound: snd_soc_register_card failed (-517)
...
[ 14.970443] ALSA device list:
[ 14.996628] No soundcards found.
This commit finally fixes this again.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Add quirks to select the right input-map, jack-detect pin, etc. for:
Linx Linx7 tablet
Onda V975w tablet
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
A fairly big update, including quite a bit of core activity this time
around (which is good to see) along with a fairly large set of new
drivers.
- A new snd_pcm_stop_xrun() helper which is now used in several
drivers.
- Support for providing name prefixes to generic component nodes.
- Quite a few fixes for DPCM as it gains a bit wider use and more
robust testing.
- Generalization of the DIO2125 support to a simple amplifier driver.
- Accessory detection support for the audio graph card.
- DT support for PXA AC'97 devices.
- Quirks for a number of new x86 systems.
- Support for AM Logic Meson, Everest ES7154, Intel systems with
RT5682, Qualcomm QDSP6 and WCD9335, Realtek RT5682 and TI TAS5707.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAltxVZsTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0CtwB/0U+IUWLlojWD6RDfueycvc9TiZW0t4
gBT3OD8f4oif0MuMy6oE2ag8JPNU8n5MnO14U366GDaEyZPj79W7f50Q8Nnyht/n
py6fQfyo7Ec2hFJstDI42KvDymTbAer6hnAUJarr/FdZHdGeOfYV+s7aHp5aEQAS
KACnX8qWo87VePouNBorqWXWueAJTb6zpWy7YQ1KGb/pJIAeue2Y9pLRGXQos1BS
E1AP+ge2BMnz7BeiCgw/39hN6X545nJ1fcZKuIu8Gqy9ahqEDHgmBWPAehtGnfVj
D8JPplTaBFtAsJwi18b7ApWtcytpizPPN/l3NTA4fTRJQe9kxfDmnE7b
=fvKX
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v4.19
A fairly big update, including quite a bit of core activity this time
around (which is good to see) along with a fairly large set of new
drivers.
- A new snd_pcm_stop_xrun() helper which is now used in several
drivers.
- Support for providing name prefixes to generic component nodes.
- Quite a few fixes for DPCM as it gains a bit wider use and more
robust testing.
- Generalization of the DIO2125 support to a simple amplifier driver.
- Accessory detection support for the audio graph card.
- DT support for PXA AC'97 devices.
- Quirks for a number of new x86 systems.
- Support for AM Logic Meson, Everest ES7154, Intel systems with
RT5682, Qualcomm QDSP6 and WCD9335, Realtek RT5682 and TI TAS5707.
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1056531 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
