This erratum essentially causes the CPU to forget which privilege
level it is operating on (kernel vs. user) for the purposes of MPX.
This erratum can only be triggered when a system is not using
Supervisor Mode Execution Prevention (SMEP). Our workaround for
the erratum is to ensure that MPX can only be used in cases where
SMEP is present in the processor and is enabled.
This erratum only affects Core processors. Atom is unaffected.
But, there is no architectural way to determine Atom vs. Core.
So, we just apply this workaround to all processors. It's
possible that it will mistakenly disable MPX on some Atom
processsors or future unaffected Core processors. There are
currently no processors that have MPX and not SMEP. It would
take something akin to a hypervisor masking SMEP out on an Atom
processor for this to present itself on current hardware.
More details can be found at:
http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/desktop-6th-gen-core-family-spec-update.pdf
"
SKD046 Branch Instructions May Initialize MPX Bound Registers Incorrectly
Problem:
Depending on the current Intel MPX (Memory Protection
Extensions) configuration, execution of certain branch
instructions (near CALL, near RET, near JMP, and Jcc
instructions) without a BND prefix (F2H) initialize the MPX bound
registers. Due to this erratum, such a branch instruction that is
executed both with CPL = 3 and with CPL < 3 may not use the
correct MPX configuration register (BNDCFGU or BNDCFGS,
respectively) for determining whether to initialize the bound
registers; it may thus initialize the bound registers when it
should not, or fail to initialize them when it should.
Implication:
A branch instruction that has executed both in user mode and in
supervisor mode (from the same linear address) may cause a #BR
(bound range fault) when it should not have or may not cause a
#BR when it should have. Workaround An operating system can
avoid this erratum by setting CR4.SMEP[bit 20] to enable
supervisor-mode execution prevention (SMEP). When SMEP is
enabled, no code can be executed both with CPL = 3 and with CPL < 3.
"
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160512220400.3B35F1BC@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 boot updates from Ingo Molnar:
"The biggest changes in this cycle were:
- prepare for more KASLR related changes, by restructuring, cleaning
up and fixing the existing boot code. (Kees Cook, Baoquan He,
Yinghai Lu)
- simplifly/concentrate subarch handling code, eliminate
paravirt_enabled() usage. (Luis R Rodriguez)"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
x86/KASLR: Clarify purpose of each get_random_long()
x86/KASLR: Add virtual address choosing function
x86/KASLR: Return earliest overlap when avoiding regions
x86/KASLR: Add 'struct slot_area' to manage random_addr slots
x86/boot: Add missing file header comments
x86/KASLR: Initialize mapping_info every time
x86/boot: Comment what finalize_identity_maps() does
x86/KASLR: Build identity mappings on demand
x86/boot: Split out kernel_ident_mapping_init()
x86/boot: Clean up indenting for asm/boot.h
x86/KASLR: Improve comments around the mem_avoid[] logic
x86/boot: Simplify pointer casting in choose_random_location()
x86/KASLR: Consolidate mem_avoid[] entries
x86/boot: Clean up pointer casting
x86/boot: Warn on future overlapping memcpy() use
x86/boot: Extract error reporting functions
x86/boot: Correctly bounds-check relocations
x86/KASLR: Clean up unused code from old 'run_size' and rename it to 'kernel_total_size'
x86/boot: Fix "run_size" calculation
x86/boot: Calculate decompression size during boot not build
...
Pull x86 asm updates from Ingo Molnar:
"The main changes in this cycle were:
- MSR access API fixes and enhancements (Andy Lutomirski)
- early exception handling improvements (Andy Lutomirski)
- user-space FS/GS prctl usage fixes and improvements (Andy
Lutomirski)
- Remove the cpu_has_*() APIs and replace them with equivalents
(Borislav Petkov)
- task switch micro-optimization (Brian Gerst)
- 32-bit entry code simplification (Denys Vlasenko)
- enhance PAT handling in enumated CPUs (Toshi Kani)
... and lots of other cleanups/fixlets"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
x86/arch_prctl/64: Restore accidentally removed put_cpu() in ARCH_SET_GS
x86/entry/32: Remove asmlinkage_protect()
x86/entry/32: Remove GET_THREAD_INFO() from entry code
x86/entry, sched/x86: Don't save/restore EFLAGS on task switch
x86/asm/entry/32: Simplify pushes of zeroed pt_regs->REGs
selftests/x86/ldt_gdt: Test set_thread_area() deletion of an active segment
x86/tls: Synchronize segment registers in set_thread_area()
x86/asm/64: Rename thread_struct's fs and gs to fsbase and gsbase
x86/arch_prctl/64: Remove FSBASE/GSBASE < 4G optimization
x86/segments/64: When load_gs_index fails, clear the base
x86/segments/64: When loadsegment(fs, ...) fails, clear the base
x86/asm: Make asm/alternative.h safe from assembly
x86/asm: Stop depending on ptrace.h in alternative.h
x86/entry: Rename is_{ia32,x32}_task() to in_{ia32,x32}_syscall()
x86/asm: Make sure verify_cpu() has a good stack
x86/extable: Add a comment about early exception handlers
x86/msr: Set the return value to zero when native_rdmsr_safe() fails
x86/paravirt: Make "unsafe" MSR accesses unsafe even if PARAVIRT=y
x86/paravirt: Add paravirt_{read,write}_msr()
x86/msr: Carry on after a non-"safe" MSR access fails
...
Remove the linebreak in the conditional and s/errata/erratum/ as the
singular is "erratum".
No functionality change.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1462733920-7224-1-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Josef reported that the uncore driver trips over with CONFIG_SMP=n because
x86_max_cores is 16 instead of 12.
The reason is, that for SMP=n the extended topology detection is a NOOP and
the cache leaf is used to determine the number of cores. That's wrong in two
aspects:
1) The cache leaf enumerates the maximum addressable number of cores in the
package, which is obviously not correct
2) UP has no business with topology bits at all.
Make intel_num_cpu_cores() return 1 for CONFIG_SMP=n
Reported-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team <Kernel-team@fb.com>
Cc: Kan Liang <kan.liang@intel.com>
Link: http://lkml.kernel.org/r/761b4a2a-0332-7954-f030-c6639f949612@fb.com
Use static_cpu_has() in __flush_tlb_all() due to the time-sensitivity of
this one.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1459266123-21878-10-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 asm updates from Ingo Molnar:
"This is another big update. Main changes are:
- lots of x86 system call (and other traps/exceptions) entry code
enhancements. In particular the complex parts of the 64-bit entry
code have been migrated to C code as well, and a number of dusty
corners have been refreshed. (Andy Lutomirski)
- vDSO special mapping robustification and general cleanups (Andy
Lutomirski)
- cpufeature refactoring, cleanups and speedups (Borislav Petkov)
- lots of other changes ..."
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
x86/cpufeature: Enable new AVX-512 features
x86/entry/traps: Show unhandled signal for i386 in do_trap()
x86/entry: Call enter_from_user_mode() with IRQs off
x86/entry/32: Change INT80 to be an interrupt gate
x86/entry: Improve system call entry comments
x86/entry: Remove TIF_SINGLESTEP entry work
x86/entry/32: Add and check a stack canary for the SYSENTER stack
x86/entry/32: Simplify and fix up the SYSENTER stack #DB/NMI fixup
x86/entry: Only allocate space for tss_struct::SYSENTER_stack if needed
x86/entry: Vastly simplify SYSENTER TF (single-step) handling
x86/entry/traps: Clear DR6 early in do_debug() and improve the comment
x86/entry/traps: Clear TIF_BLOCKSTEP on all debug exceptions
x86/entry/32: Restore FLAGS on SYSEXIT
x86/entry/32: Filter NT and speed up AC filtering in SYSENTER
x86/entry/compat: In SYSENTER, sink AC clearing below the existing FLAGS test
selftests/x86: In syscall_nt, test NT|TF as well
x86/asm-offsets: Remove PARAVIRT_enabled
x86/entry/32: Introduce and use X86_BUG_ESPFIX instead of paravirt_enabled
uprobes: __create_xol_area() must nullify xol_mapping.fault
x86/cpufeature: Create a new synthetic cpu capability for machine check recovery
...
For per package oriented services we must be able to rely on the number of CPU
packages to be within bounds. Create a tracking facility, which
- calculates the number of possible packages depending on nr_cpu_ids after boot
- makes sure that the package id is within the number of possible packages. If
the apic id is outside we map it to a logical package id if there is enough
space available.
Provide interfaces for drivers to query the mapping and do translations from
physcial to logical ids.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/20160222221011.541071755@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Use the more current logging style pr_<level>(...) instead of the old
printk(KERN_<LEVEL> ...).
- Convert pr_warning() to pr_warn().
Signed-off-by: Chen Yucong <slaoub@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454384702-21707-1-git-send-email-slaoub@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Move them to a separate header and have the following
dependency:
x86/cpufeatures.h <- x86/processor.h <- x86/cpufeature.h
This makes it easier to use the header in asm code and not
include the whole cpufeature.h and add guards for asm.
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1453842730-28463-5-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Those are stupid and code should use static_cpu_has_safe() or
boot_cpu_has() instead. Kill the least used and unused ones.
The remaining ones need more careful inspection before a conversion can
happen. On the TODO.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1449481182-27541-4-git-send-email-bp@alien8.de
Cc: David Sterba <dsterba@suse.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The Intel Merrifield SoC is a successor of the Intel MID line of
SoCs. Let's set the neccessary capability for that chip. See commit
c54fdbb282 (x86: Add cpu capability flag X86_FEATURE_NONSTOP_TSC_S3)
for the details.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: http://lkml.kernel.org/r/1444319786-36125-1-git-send-email-andriy.shevchenko@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
MSR_IA32_ENERGY_PERF_BIAS is lost after suspend/resume:
x86_energy_perf_policy -r before
cpu0: 0x0000000000000006
cpu1: 0x0000000000000006
cpu2: 0x0000000000000006
cpu3: 0x0000000000000006
cpu4: 0x0000000000000006
cpu5: 0x0000000000000006
cpu6: 0x0000000000000006
cpu7: 0x0000000000000006
after
cpu0: 0x0000000000000000
cpu1: 0x0000000000000006
cpu2: 0x0000000000000006
cpu3: 0x0000000000000006
cpu4: 0x0000000000000006
cpu5: 0x0000000000000006
cpu6: 0x0000000000000006
cpu7: 0x0000000000000006
Resulting in inconsistent energy policy settings across CPUs.
This register is set via init_intel() at bootup. During resume,
the secondary CPUs are brought online again and init_intel() is
callled which re-initializes the register. The boot CPU however
never reinitializes the register.
Add a syscore callback to reinitialize the register for the boot CPU.
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1437428878-4105-1-git-send-email-labbott@fedoraproject.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
dmesg (from util-linux) currently has two methods for reading the kernel
message ring buffer: /dev/kmsg and syslog(2). Since kernel 3.5.0 kmsg
has been the default, which escapes control characters (e.g. new lines)
before they are shown.
This change means that when dmesg is using /dev/kmsg, a 2 line printk
makes the output messy, because the second line does not get a
timestamp.
For example:
[ 0.012863] CPU0: Thermal monitoring enabled (TM1)
[ 0.012869] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.012958] Freeing SMP alternatives memory: 28K (ffffffff81d86000 - ffffffff81d8d000)
[ 0.014961] dmar: Host address width 39
Because printk.c intentionally escapes control characters, they should
not be there in the first place. This patch fixes two occurrences of
this.
Signed-off-by: Steven Honeyman <stevenhoneyman@gmail.com>
Link: https://lkml.kernel.org/r/1414856696-8094-1-git-send-email-stevenhoneyman@gmail.com
[ Boris: make cpu_detect_tlb() static, while at it. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
The Intel Quark processor is a part of family 5, but does not have the
F00F bug present in Pentiums of the same family.
Pentiums were models 0 through 8, Quark is model 9.
Signed-off-by: Dave Jones <davej@redhat.com>
Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Link: http://lkml.kernel.org/r/20141028175753.GA12743@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Intel processors which don't report cache information via cpuid(2)
or cpuid(4) need quirk code in the legacy_cache_size callback to
report this data. For Intel that callback is is intel_size_cache().
This patch enables calling of cpu_detect_cache_sizes() inside of
init_intel() and hence the calling of the legacy_cache callback in
intel_size_cache(). Adding this call will ensure that PIII Tualatin
currently in intel_size_cache() and Quark SoC X1000 being added to
intel_size_cache() in this patch will report their respective cache
sizes.
This model of calling cpu_detect_cache_sizes() is consistent with
AMD/Via/Cirix/Transmeta and Centaur.
Also added is a string to idenitfy the Quark as Quark SoC X1000
giving better and more descriptive output via /proc/cpuinfo
Adding cpu_detect_cache_sizes to init_intel() will enable calling
of intel_size_cache() on Intel processors which currently no code
can reach. Therefore this patch will also re-enable reporting
of PIII Tualatin cache size information as well as add
Quark SoC X1000 support.
Comment text and cache flow logic suggested by Thomas Gleixner
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: davej@redhat.com
Cc: hmh@hmh.eng.br
Link: http://lkml.kernel.org/r/1412641189-12415-3-git-send-email-pure.logic@nexus-software.ie
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Quark x1000 advertises PGE via the standard CPUID method
PGE bits exist in Quark X1000's PTEs. In order to flush
an individual PTE it is necessary to reload CR3 irrespective
of the PTE.PGE bit.
See Quark Core_DevMan_001.pdf section 6.4.11
This bug was fixed in Galileo kernels, unfixed vanilla kernels are expected to
crash and burn on this platform.
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Borislav Petkov <bp@alien8.de>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1411514784-14885-1-git-send-email-pure.logic@nexus-software.ie
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 mm changes from Ingo Molnar:
"The main change in this cycle is the rework of the TLB range flushing
code, to simplify, fix and consolidate the code. By Dave Hansen"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Set TLB flush tunable to sane value (33)
x86/mm: New tunable for single vs full TLB flush
x86/mm: Add tracepoints for TLB flushes
x86/mm: Unify remote INVLPG code
x86/mm: Fix missed global TLB flush stat
x86/mm: Rip out complicated, out-of-date, buggy TLB flushing
x86/mm: Clean up the TLB flushing code
x86/smep: Be more informative when signalling an SMEP fault
Pull x86 cpufeature updates from Ingo Molnar:
"The main changes in this cycle were:
- Continued cleanups of CPU bugs mis-marked as 'missing features', by
Borislav Petkov.
- Detect the xsaves/xrstors feature and releated cleanup, by Fenghua
Yu"
* 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, cpu: Kill cpu_has_mp
x86, amd: Cleanup init_amd
x86/cpufeature: Add bug flags to /proc/cpuinfo
x86, cpufeature: Convert more "features" to bugs
x86/xsaves: Detect xsaves/xrstors feature
x86/cpufeature.h: Reformat x86 feature macros
I think the flush_tlb_mm_range() code that tries to tune the
flush sizes based on the CPU needs to get ripped out for
several reasons:
1. It is obviously buggy. It uses mm->total_vm to judge the
task's footprint in the TLB. It should certainly be using
some measure of RSS, *NOT* ->total_vm since only resident
memory can populate the TLB.
2. Haswell, and several other CPUs are missing from the
intel_tlb_flushall_shift_set() function. Thus, it has been
demonstrated to bitrot quickly in practice.
3. It is plain wrong in my vm:
[ 0.037444] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.037444] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.037444] tlb_flushall_shift: 6
Which leads to it to never use invlpg.
4. The assumptions about TLB refill costs are wrong:
http://lkml.kernel.org/r/1337782555-8088-3-git-send-email-alex.shi@intel.com
(more on this in later patches)
5. I can not reproduce the original data: https://lkml.org/lkml/2012/5/17/59
I believe the sample times were too short. Running the
benchmark in a loop yields times that vary quite a bit.
Note that this leaves us with a static ceiling of 1 page. This
is a conservative, dumb setting, and will be revised in a later
patch.
This also removes the code which attempts to predict whether we
are flushing data or instructions. We expect instruction flushes
to be relatively rare and not worth tuning for explicitly.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20140731154055.ABC88E89@viggo.jf.intel.com
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
P4 systems with cpuid level < 4 can have SMT, but the cache topology
description available (cpuid2) does not include SMP information.
Now we know that SMT shares all cache levels, and therefore we can
mark all available cache levels as shared.
We do this by setting cpu_llc_id to ->phys_proc_id, since that's
the same for each SMT thread. We can do this unconditional since if
there's no SMT its still true, the one CPU shares cache with only
itself.
This fixes a problem where such CPUs report an incorrect LLC CPU mask.
This in turn fixes a crash in the scheduler where the topology was
build wrong, it assumes the LLC mask to include at least the SMT CPUs.
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Bruno Wolff III <bruno@wolff.to>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140722133514.GM12054@laptop.lan
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
X86_FEATURE_FXSAVE_LEAK, X86_FEATURE_11AP and
X86_FEATURE_CLFLUSH_MONITOR are not really features but synthetic bits
we use for applying different bug workarounds. Call them what they
really are, and make sure they get the proper cross-CPU behavior (OR
rather than AND).
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1403042783-23278-1-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Pull x86 old platform removal from Peter Anvin:
"This patchset removes support for several completely obsolete
platforms, where the maintainers either have completely vanished or
acked the removal. For some of them it is questionable if there even
exists functional specimens of the hardware"
Geert Uytterhoeven apparently thought this was a April Fool's pull request ;)
* 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, platforms: Remove NUMAQ
x86, platforms: Remove SGI Visual Workstation
x86, apic: Remove support for IBM Summit/EXA chipset
x86, apic: Remove support for ia32-based Unisys ES7000
Many Pentium M systems disable PAE but may have a functionally usable PAE
implementation. This adds the "forcepae" parameter which bypasses the boot
check for PAE, and sets the CPU as being PAE capable. Using this parameter
will taint the kernel with TAINT_CPU_OUT_OF_SPEC.
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Link: http://lkml.kernel.org/r/20140307114040.GA4997@localhost
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Replace somewhat arbitrary constants for bits in MSR_IA32_MISC_ENABLE
with verbose but systematic ones. Add _BIT defines for all the rest
of them, too.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The NUMAQ support seems to be unmaintained, remove it.
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/n/530CFD6C.7040705@zytor.com
There was a large ebizzy performance regression that was
bisected to commit 611ae8e3 (x86/tlb: enable tlb flush range
support for x86). The problem was related to the
tlb_flushall_shift tuning for IvyBridge which was altered. The
problem is that it is not clear if the tuning values for each
CPU family is correct as the methodology used to tune the values
is unclear.
This patch uses a conservative tlb_flushall_shift value for all
CPU families except IvyBridge so the decision can be revisited
if any regression is found as a result of this change.
IvyBridge is an exception as testing with one methodology
determined that the value of 2 is acceptable. Details are in
the changelog for the patch "x86: mm: Change tlb_flushall_shift
for IvyBridge".
One important aspect of this to watch out for is Xen. The
original commit log mentioned large performance gains on Xen.
It's possible Xen is more sensitive to this value if it flushes
small ranges of pages more frequently than workloads on bare
metal typically do.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Tested-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-dyzMww3fqugnhbhgo6Gxmtkw@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There was a large performance regression that was bisected to
commit 611ae8e3 ("x86/tlb: enable tlb flush range support for
x86"). This patch simply changes the default balance point
between a local and global flush for IvyBridge.
In the interest of allowing the tests to be reproduced, this
patch was tested using mmtests 0.15 with the following
configurations
configs/config-global-dhp__tlbflush-performance
configs/config-global-dhp__scheduler-performance
configs/config-global-dhp__network-performance
Results are from two machines
Ivybridge 4 threads: Intel(R) Core(TM) i3-3240 CPU @ 3.40GHz
Ivybridge 8 threads: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz
Page fault microbenchmark showed nothing interesting.
Ebizzy was configured to run multiple iterations and threads.
Thread counts ranged from 1 to NR_CPUS*2. For each thread count,
it ran 100 iterations and each iteration lasted 10 seconds.
Ivybridge 4 threads
3.13.0-rc7 3.13.0-rc7
vanilla altshift-v3
Mean 1 6395.44 ( 0.00%) 6789.09 ( 6.16%)
Mean 2 7012.85 ( 0.00%) 8052.16 ( 14.82%)
Mean 3 6403.04 ( 0.00%) 6973.74 ( 8.91%)
Mean 4 6135.32 ( 0.00%) 6582.33 ( 7.29%)
Mean 5 6095.69 ( 0.00%) 6526.68 ( 7.07%)
Mean 6 6114.33 ( 0.00%) 6416.64 ( 4.94%)
Mean 7 6085.10 ( 0.00%) 6448.51 ( 5.97%)
Mean 8 6120.62 ( 0.00%) 6462.97 ( 5.59%)
Ivybridge 8 threads
3.13.0-rc7 3.13.0-rc7
vanilla altshift-v3
Mean 1 7336.65 ( 0.00%) 7787.02 ( 6.14%)
Mean 2 8218.41 ( 0.00%) 9484.13 ( 15.40%)
Mean 3 7973.62 ( 0.00%) 8922.01 ( 11.89%)
Mean 4 7798.33 ( 0.00%) 8567.03 ( 9.86%)
Mean 5 7158.72 ( 0.00%) 8214.23 ( 14.74%)
Mean 6 6852.27 ( 0.00%) 7952.45 ( 16.06%)
Mean 7 6774.65 ( 0.00%) 7536.35 ( 11.24%)
Mean 8 6510.50 ( 0.00%) 6894.05 ( 5.89%)
Mean 12 6182.90 ( 0.00%) 6661.29 ( 7.74%)
Mean 16 6100.09 ( 0.00%) 6608.69 ( 8.34%)
Ebizzy hits the worst case scenario for TLB range flushing every
time and it shows for these Ivybridge CPUs at least that the
default choice is a poor on. The patch addresses the problem.
Next was a tlbflush microbenchmark written by Alex Shi at
http://marc.info/?l=linux-kernel&m=133727348217113 . It
measures access costs while the TLB is being flushed. The
expectation is that if there are always full TLB flushes that
the benchmark would suffer and it benefits from range flushing
There are 320 iterations of the test per thread count. The
number of entries is randomly selected with a min of 1 and max
of 512. To ensure a reasonably even spread of entries, the full
range is broken up into 8 sections and a random number selected
within that section.
iteration 1, random number between 0-64
iteration 2, random number between 64-128 etc
This is still a very weak methodology. When you do not know
what are typical ranges, random is a reasonable choice but it
can be easily argued that the opimisation was for smaller ranges
and an even spread is not representative of any workload that
matters. To improve this, we'd need to know the probability
distribution of TLB flush range sizes for a set of workloads
that are considered "common", build a synthetic trace and feed
that into this benchmark. Even that is not perfect because it
would not account for the time between flushes but there are
limits of what can be reasonably done and still be doing
something useful. If a representative synthetic trace is
provided then this benchmark could be revisited and the shift values retuned.
Ivybridge 4 threads
3.13.0-rc7 3.13.0-rc7
vanilla altshift-v3
Mean 1 10.50 ( 0.00%) 10.50 ( 0.03%)
Mean 2 17.59 ( 0.00%) 17.18 ( 2.34%)
Mean 3 22.98 ( 0.00%) 21.74 ( 5.41%)
Mean 5 47.13 ( 0.00%) 46.23 ( 1.92%)
Mean 8 43.30 ( 0.00%) 42.56 ( 1.72%)
Ivybridge 8 threads
3.13.0-rc7 3.13.0-rc7
vanilla altshift-v3
Mean 1 9.45 ( 0.00%) 9.36 ( 0.93%)
Mean 2 9.37 ( 0.00%) 9.70 ( -3.54%)
Mean 3 9.36 ( 0.00%) 9.29 ( 0.70%)
Mean 5 14.49 ( 0.00%) 15.04 ( -3.75%)
Mean 8 41.08 ( 0.00%) 38.73 ( 5.71%)
Mean 13 32.04 ( 0.00%) 31.24 ( 2.49%)
Mean 16 40.05 ( 0.00%) 39.04 ( 2.51%)
For both CPUs, average access time is reduced which is good as
this is the benchmark that was used to tune the shift values in
the first place albeit it is now known *how* the benchmark was
used.
The scheduler benchmarks were somewhat inconclusive. They
showed gains and losses and makes me reconsider how stable those
benchmarks really are or if something else might be interfering
with the test results recently.
Network benchmarks were inconclusive. Almost all results were
flat except for netperf-udp tests on the 4 thread machine.
These results were unstable and showed large variations between
reboots. It is unknown if this is a recent problems but I've
noticed before that netperf-udp results tend to vary.
Based on these results, changing the default for Ivybridge seems
like a logical choice.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Tested-by: Davidlohr Bueso <davidlohr@hp.com>
Reviewed-by: Alex Shi <alex.shi@linaro.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-cqnadffh1tiqrshthRj3Esge@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 TLB detection update from Ingo Molnar:
"A single change that extends our TLB cache size detection+reporting
code"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, cpu: Detect more TLB configuration
Pull x86 cleanups from Ingo Molnar:
"Misc cleanups"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, cpu, amd: Fix a shadowed variable situation
um, x86: Fix vDSO build
x86: Delete non-required instances of include <linux/init.h>
x86, realmode: Pointer walk cleanups, pull out invariant use of __pa()
x86/traps: Clean up error exception handler definitions
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>. Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.
[ hpa: undid incorrect removal from arch/x86/kernel/head_32.S ]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Link: http://lkml.kernel.org/r/1389054026-12947-1-git-send-email-paul.gortmaker@windriver.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Linux 3.10 changed the timing of how thread_info->flags is touched:
x86: Use generic idle loop
(7d1a941731)
This caused Intel NHM-EX and WSM-EX servers to experience a large number
of immediate MONITOR/MWAIT break wakeups, which caused cpuidle to demote
from deep C-states to shallow C-states, which caused these platforms
to experience a significant increase in idle power.
Note that this issue was already present before the commit above,
however, it wasn't seen often enough to be noticed in power measurements.
Here we extend an errata workaround from the Core2 EX "Dunnington"
to extend to NHM-EX and WSM-EX, to prevent these immediate
returns from MWAIT, reducing idle power on these platforms.
While only acpi_idle ran on Dunnington, intel_idle
may also run on these two newer systems.
As of today, there are no other models that are known
to need this tweak.
Link: http://lkml.kernel.org/r/CAJvTdK=%2BaNN66mYpCGgbHGCHhYQAKx-vB0kJSWjVpsNb_hOAtQ@mail.gmail.com
Signed-off-by: Len Brown <len.brown@intel.com>
Link: http://lkml.kernel.org/r/baff264285f6e585df757d58b17788feabc68918.1387403066.git.len.brown@intel.com
Cc: <stable@vger.kernel.org> # 3.12.x, 3.11.x, 3.10.x
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
struct cpu_dev's c_models is only ever set inside CONFIG_X86_32
conditionals (or code that's being built for 32-bit only), so
there's no use of reserving the (empty) space for the model
names in a 64-bit kernel.
Similarly, c_size_cache is only used in the #else of a
CONFIG_X86_64 conditional, so reserving space for (and in one
case even initializing) that field is pointless for 64-bit
kernels too.
While moving both fields to the end of the structure, I also
noticed that:
- the c_models array size was one too small, potentially causing
table_lookup_model() to return garbage on Intel CPUs (intel.c's
instance was lacking the sentinel with family being zero), so the
patch bumps that by one,
- c_models' vendor sub-field was unused (and anyway redundant
with the base structure's c_x86_vendor field), so the patch deletes it.
Also rename the legacy fields so that their legacy nature stands out
and comment their declarations.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/5265036802000078000FC4DB@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Pull perparatory x86 kasrl changes from Ingo Molnar:
"This contains changes from the ongoing KASLR work, by Kees Cook.
The main changes are the use of a read-only IDT on x86 (which
decouples the userspace visible virtual IDT address from the physical
address), and a rework of ELF relocation support, in preparation of
random, boot-time kernel image relocation."
* 'x86-kaslr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, relocs: Refactor the relocs tool to merge 32- and 64-bit ELF
x86, relocs: Build separate 32/64-bit tools
x86, relocs: Add 64-bit ELF support to relocs tool
x86, relocs: Consolidate processing logic
x86, relocs: Generalize ELF structure names
x86: Use a read-only IDT alias on all CPUs
Make a copy of the IDT (as seen via the "sidt" instruction) read-only.
This primarily removes the IDT from being a target for arbitrary memory
write attacks, and has the added benefit of also not leaking the kernel
base offset, if it has been relocated.
We already did this on vendor == Intel and family == 5 because of the
F0 0F bug -- regardless of if a particular CPU had the F0 0F bug or
not. Since the workaround was so cheap, there simply was no reason to
be very specific. This patch extends the readonly alias to all CPUs,
but does not activate the #PF to #UD conversion code needed to deliver
the proper exception in the F0 0F case except on Intel family 5
processors.
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/20130410192422.GA17344@www.outflux.net
Cc: Eric Northup <digitaleric@google.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
On some new Intel Atom processors (Penwell and Cloverview), there is
a feature that the TSC won't stop in S3 state, say the TSC value
won't be reset to 0 after resume. This feature makes TSC a more reliable
clocksource and could benefit the timekeeping code during system
suspend/resume cycle, so add a flag for it.
Signed-off-by: Feng Tang <feng.tang@intel.com>
[jstultz: Fix checkpatch warning]
Signed-off-by: John Stultz <john.stultz@linaro.org>
