Introduce __smp_{store_release,load_acquire}, and rely on the generic
definitions for smp_{store_release,load_acquire}. This avoids the use
of full ("rw,rw") fences on SMP.
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Pull perf fixes from Ingo Molnar:
"Two fixlets"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/hwbp: Simplify the perf-hwbp code, fix documentation
perf/x86/intel: Fix linear IP of PEBS real_ip on Haswell and later CPUs
Pull x86 PTI fixes from Ingo Molnar:
"Two fixes: a relatively simple objtool fix that makes Clang built
kernels work with ORC debug info, plus an alternatives macro fix"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Fixup alternative_call_2
objtool: Add Clang support
PPC:
- Fix a bug causing occasional machine check exceptions on POWER8 hosts
(introduced in 4.16-rc1)
x86:
- Fix a guest crashing regression with nested VMX and restricted guest
(introduced in 4.16-rc1)
- Fix dependency check for pv tlb flush (The wrong dependency that
effectively disabled the feature was added in 4.16-rc4, the original
feature in 4.16-rc1, so it got decent testing.)
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJavUt5AAoJEED/6hsPKofo8uQH/RuijrsAIUnymkYY+6BYFXlh
Ri8qhG8VB+C3SpWEtsqcqNVkjJTepCD2Ej5BJTL4Gc9BSTWy7Ht6kqskEgwcnzu2
xRfkg0q0vTj1+GDd+UiTZfxiinoHtB9x3fiXali5UNTCd1fweLxdidETfO+GqMMq
KDhTR+S8dXE5VG7r+iJ80LZPtHQJ94f0fh9XpQk3X2ExTG5RBxag1U2nCfiKRAZk
xRv1CNAxNaBxS38CgYfHzg31NJx38fnq/qREsIdOx0Ju9WQkglBFkhLAGUb4vL0I
nn8YX/oV9cW2G8tyPWjC245AouABOLbzu0xyj5KgCY/z1leA9tdLFX/ET6Zye+E=
=++uZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"PPC:
- Fix a bug causing occasional machine check exceptions on POWER8
hosts (introduced in 4.16-rc1)
x86:
- Fix a guest crashing regression with nested VMX and restricted
guest (introduced in 4.16-rc1)
- Fix dependency check for pv tlb flush (the wrong dependency that
effectively disabled the feature was added in 4.16-rc4, the
original feature in 4.16-rc1, so it got decent testing)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix pv tlb flush dependencies
KVM: nVMX: sync vmcs02 segment regs prior to vmx_set_cr0
KVM: PPC: Book3S HV: Fix duplication of host SLB entries
These are actually all fixes for pre-4.16 code, or new hardware workarounds.
Fix missing AT_BASE_PLATFORM (in auxv) when we're using a new firmware interface
for describing CPU features.
Fix lost pending interrupts due to a race in our interrupt soft-masking code.
A workaround for a nest MMU bug with TLB invalidations on Power9.
A workaround for broadcast TLB invalidations on Power9.
Fix a bug in our instruction SLB miss handler, when handling bad addresses
(eg. >= TASK_SIZE), which could corrupt non-volatile user GPRs.
Thanks to:
Aneesh Kumar K.V, Balbir Singh, Benjamin Herrenschmidt, Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=qP8V
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 4.16. Apologies if this is a bit big at
rc7, but they're all reasonably important fixes. None are actually for
new code, so they aren't indicative of 4.16 being in bad shape from
our point of view.
- Fix missing AT_BASE_PLATFORM (in auxv) when we're using a new
firmware interface for describing CPU features.
- Fix lost pending interrupts due to a race in our interrupt
soft-masking code.
- A workaround for a nest MMU bug with TLB invalidations on Power9.
- A workaround for broadcast TLB invalidations on Power9.
- Fix a bug in our instruction SLB miss handler, when handling bad
addresses (eg. >= TASK_SIZE), which could corrupt non-volatile user
GPRs.
Thanks to: Aneesh Kumar K.V, Balbir Singh, Benjamin Herrenschmidt,
Nicholas Piggin"
* tag 'powerpc-4.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Fix i-side SLB miss bad address handler saving nonvolatile GPRs
powerpc/mm: Fixup tlbie vs store ordering issue on POWER9
powerpc/mm/radix: Move the functions that does the actual tlbie closer
powerpc/mm/radix: Remove unused code
powerpc/mm: Workaround Nest MMU bug with TLB invalidations
powerpc/mm: Add tracking of the number of coprocessors using a context
powerpc/64s: Fix lost pending interrupt due to race causing lost update to irq_happened
powerpc/64s: Fix NULL AT_BASE_PLATFORM when using DT CPU features
Here are are a couple of last-minute fixes for 4.16, mostly for
regressions. As usual, the majory are device tree changes:
- USB 3 support on rk3399 didn't work and is being reverted for now
- One fix for an old suspend/resume bug on rk3399
- A few regulator related fixes on Banana Pi M2, and on imx7d-sdb
- A boot regression fix for all Aspeed SoCs failing to find
their memory
- One more dtc warning fix
The other changes are:
- A few updates to the MAINTAINERS file
- A revert for an incorrect orion5x cleanup
- Two power management fixes for OMAP
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qZnT
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here are are a couple of last-minute fixes for 4.16, mostly for
regressions. As usual, the majory are device tree changes:
- USB 3 support on rk3399 didn't work and is being reverted for now
- One fix for an old suspend/resume bug on rk3399
- A few regulator related fixes on Banana Pi M2, and on imx7d-sdb
- A boot regression fix for all Aspeed SoCs failing to find their
memory
- One more dtc warning fix
The other changes are:
- A few updates to the MAINTAINERS file
- A revert for an incorrect orion5x cleanup
- Two power management fixes for OMAP"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP: Fix SRAM W+X mapping
ARM: dts: aspeed: Add default memory node
mailmap: Update email address for Gregory CLEMENT
ARM: davinci: fix the GPIO lookup for omapl138-hawk
MAINTAINERS: Update Tegra IOMMU maintainer
ARM: dts: imx7d-sdb: Fix regulator-usb-otg2-vbus node name
ARM: ux500: Fix PMU IRQ regression
ARM: dts: rockchip: Add missing #sound-dai-cells on rk3288
Revert "arm64: dts: rockchip: add usb3-phy otg-port support for rk3399"
arm64: dts: rockchip: Fix rk3399-gru-* s2r (pinctrl hogs, wifi reset)
ARM: OMAP: Fix dmtimer init for omap1
MAINTAINERS: update email address for Maxime Ripard
ARM: dts: sun6i: a31s: bpi-m2: add missing regulators
ARM: dts: sun6i: a31s: bpi-m2: improve pmic properties
A critical error was found testing the fixed UV4 HUB in that an MMR address
was found to be incorrect. This causes the virtual address space for
accessing the MMIOH1 region to be allocated with the incorrect size.
Fixes: 673aa20c55 ("x86/platform/UV: Update uv_mmrs.h to prepare for UV4A fixes")
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: Andrew Banman <andrew.banman@hpe.com>
Link: https://lkml.kernel.org/r/20180328174011.041801248@stormcage.americas.sgi.com
PV TLB FLUSH can only be turned on when steal time is enabled.
The condition got reversed during conflict resolution.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Fixes: 4f2f61fc50 ("KVM: X86: Avoid traversing all the cpus for pv tlb flush when steal time is disabled")
[Rebased on top of kvm/master and reworded the commit message. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
BAU uses the old alloc_initr_gate90 method to setup its interrupt. This
fails silently as the BAU vector is in the range of APIC vectors that are
registered to the spurious interrupt handler. As a consequence BAU
broadcasts are not handled, and the broadcast source CPU hangs.
Update BAU to use new idt structure.
Fixes: dc20b2d526 ("x86/idt: Move interrupt gate initialization to IDT code")
Signed-off-by: Andrew Banman <abanman@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mike Travis <mike.travis@hpe.com>
Cc: Dimitri Sivanich <sivanich@hpe.com>
Cc: Russ Anderson <rja@hpe.com>
Cc: stable@vger.kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/1522188546-196177-1-git-send-email-abanman@hpe.com
Pull ARM fixes from Russell King:
"A small number of small fixes for ARM, mostly for some build issues.
One fix for a regression caused by the cpu hotplug conversion from a
few kernel versions ago"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8750/1: deflate_xip_data.sh: minor fixes
ARM: 8748/1: mm: Define vdso_start, vdso_end as array
ARM: 8747/1: make CONFIG_DEBUG_WX depend on MMU
ARM: 8746/1: vfp: Go back to clearing vfp_current_hw_state[]
The first and second patches fix the regulator support for the Bananapi M2
board.
The last one updates my email address in MAINTAINERS.
-----BEGIN PGP SIGNATURE-----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=GQc4
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
Pull "Allwinner Fixes for 4.16" from Maxime Ripard:
The first and second patches fix the regulator support for the Bananapi M2
board.
The last one updates my email address in MAINTAINERS.
* tag 'sunxi-fixes-for-4.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
MAINTAINERS: update email address for Maxime Ripard
ARM: dts: sun6i: a31s: bpi-m2: add missing regulators
ARM: dts: sun6i: a31s: bpi-m2: improve pmic properties
Fix insecure W+X mapping warning for SRAM for omaps that
don't yet use drivers/misc/*sram*.c code. An earlier attempt
at fixing this turned out to cause problems with PM on omap3,
this version works with PM on omap3.
Also fix dmtimer probe for omap16xx devices that was noticed
with the pending dmtimer move to drivers. It seems this has
been broken for a while and is a non-critical for booting.
It is needed for PM on omap16xx though.
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlqz2WgRHHRvbnlAYXRv
bWlkZS5jb20ACgkQG9Q+yVyrpXPisRAAla6az5TwwdJB5JC3BkU7pZLfmqR7jsyh
65Zj0KOp+b3kI/9jwaOql+WDf5hktEMEK6JjqDkz4Gs8WUE8tBxRYh95DlIb1sza
0UloFeVy8wgZ0XJk9/6ysXWQ6cFETjR3DW5dKSyHivtFX1MYZETD8wMUhfZ6YTuJ
1lSGpz9RhhI/PSMz9nOA7PQXSF1K+k2h9BzMaEarhDk3ni+gvoY1OahKk6kmXdFG
Op41Vfkc3/BqWxhZV79CtPPyoD1G1/pRtEFfxAUuaU6kGbA8XrHpmccyuBv2UXpo
pL4NJkI0HPR83W4iSvJgiARcTX7qzpUwCK3NmphhNKQ7tUwwF3mWwMMT+2TsZ4tD
kSViqkWqeDxcgC/JMdsff1oksjDQK+uPC8FsReZkK9MyUT3eK4gw+cRTA7fy/3jr
UZgf4PjkxouBjzrrR+aQj+R79xTX6pRSEkMjpR9hgY+eQUP9Ls+zk7JnHnJRiGqw
GaL4Lg0jh9p7DSLn9xRaPmb6qrs//XPrPoAN70PLdSi5bBqWeknMNSzorz8Xc3eR
7UBaIo445QoSRsG1eBAqxmz8F8R7p/fgQ+lKfxszyxDZ1qyCrORvdZZapdTy9nUA
adnqukn2T6QLrt3g/kckAugY8/Piek1JtbPGgFsDMRa4jcOGiZP/kEnKm6c8Hmya
LZueeqxuPac=
=/ZXy
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.16/sram-fix-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Pull "Two fixes for omap variants for v4.16-rc cycle" from Tony Lindgren:
Fix insecure W+X mapping warning for SRAM for omaps that
don't yet use drivers/misc/*sram*.c code. An earlier attempt
at fixing this turned out to cause problems with PM on omap3,
this version works with PM on omap3.
Also fix dmtimer probe for omap16xx devices that was noticed
with the pending dmtimer move to drivers. It seems this has
been broken for a while and is a non-critical for booting.
It is needed for PM on omap16xx though.
* tag 'omap-for-v4.16/sram-fix-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP: Fix SRAM W+X mapping
ARM: OMAP: Fix dmtimer init for omap1
The following pattern fails to compile while the same pattern
with alternative_call() does:
if (...)
alternative_call_2(...);
else
alternative_call_2(...);
as it expands into
if (...)
{
}; <===
else
{
};
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20180114120504.GA11368@avx2
this patch fix a bug in how the pebs->real_ip is handled in the PEBS
handler. real_ip only exists in Haswell and later processor. It is
actually the eventing IP, i.e., where the event occurred. As opposed
to the pebs->ip which is the PEBS interrupt IP which is always off
by one.
The problem is that the real_ip just like the IP needs to be fixed up
because PEBS does not record all the machine state registers, and
in particular the code segement (cs). This is why we have the set_linear_ip()
function. The problem was that set_linear_ip() was only used on the pebs->ip
and not the pebs->real_ip.
We have profiles which ran into invalid callstacks because of this.
Here is an example:
..... 0: ffffffffffffff80 recent entry, marker kernel v
..... 1: 000000000040044d <= user address in kernel space!
..... 2: fffffffffffffe00 marker enter user v
..... 3: 000000000040044d
..... 4: 00000000004004b6 oldest entry
Debugging output in get_perf_callchain():
[ 857.769909] CALLCHAIN: CPU8 ip=40044d regs->cs=10 user_mode(regs)=0
The problem is that the kernel entry in 1: points to a user level
address. How can that be?
The reason is that with PEBS sampling the instruction that caused the event
to occur and the instruction where the CPU was when the interrupt was posted
may be far apart. And sometime during that time window, the privilege level may
change. This happens, for instance, when the PEBS sample is taken close to a
kernel entry point. Here PEBS, eventing IP (real_ip) captured a user level
instruction. But by the time the PMU interrupt fired, the processor had already
entered kernel space. This is why the debug output shows a user address with
user_mode() false.
The problem comes from PEBS not recording the code segment (cs) register.
The register is used in x86_64 to determine if executing in kernel vs user
space. This is okay because the kernel has a software workaround called
set_linear_ip(). But the issue in setup_pebs_sample_data() is that
set_linear_ip() is never called on the real_ip value when it is available
(Haswell and later) and precise_ip > 1.
This patch fixes this problem and eliminates the callchain discrepancy.
The patch restructures the code around set_linear_ip() to minimize the number
of times the IP has to be set.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/1521788507-10231-1-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The SLB bad address handler's trap number fixup does not preserve the
low bit that indicates nonvolatile GPRs have not been saved. This
leads save_nvgprs to skip saving them, and subsequent functions and
return from interrupt will think they are saved.
This causes kernel branch-to-garbage debugging to not have correct
registers, can also cause userspace to have its registers clobbered
after a segfault.
Fixes: f0f558b131 ("powerpc/mm: Preserve CFAR value on SLB miss caused by access to bogus address")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull x86 and PTI fixes from Ingo Molnar:
"Misc fixes:
- fix EFI pagetables freeing
- fix vsyscall pagetable setting on Xen PV guests
- remove ancient CONFIG_X86_PPRO_FENCE=y - x86 is TSO again
- fix two binutils (ld) development version related incompatibilities
- clean up breakpoint handling
- fix an x86 self-test"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Don't use IST entry for #BP stack
x86/efi: Free efi_pgd with free_pages()
x86/vsyscall/64: Use proper accessor to update P4D entry
x86/cpu: Remove the CONFIG_X86_PPRO_FENCE=y quirk
x86/boot/64: Verify alignment of the LOAD segment
x86/build/64: Force the linker to use 2MB page size
selftests/x86/ptrace_syscall: Fix for yet more glibc interference
The kernel build system already takes care of generating the dependency
files. Having the additional -MD in KBUILD_CFLAGS leads to stray
.<pid>.d files in the build directory when we call the cc-option macro.
Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Link: http://lkml.kernel.org/r/alpine.LNX.2.21.1803242219380.30139@titan.int.lan.stealer.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Send nm complaints about broken pipe (when sed exits early) to /dev/null.
All errors should be printed to stderr.
Don't trap on normal exit so the trap can return an error code.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Define vdso_start, vdso_end as array to avoid compile-time analysis error
for the case of built with CONFIG_FORTIFY_SOURCE.
and, since vdso_start, vdso_end are used in vdso.c only,
move extern-declaration from vdso.h to vdso.c.
If kernel is built with CONFIG_FORTIFY_SOURCE,
compile-time error happens at this code.
- if (memcmp(&vdso_start, "177ELF", 4))
The size of "&vdso_start" is recognized as 1 byte, but n is 4,
So that compile-time error is reported.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jinbum Park <jinb.park7@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Without CONFIG_MMU, this results in a build failure:
./arch/arm/include/asm/memory.h:92:23: error: initializer element is not constant
#define VECTORS_BASE vectors_base
arch/arm/mm/dump.c:32:4: note: in expansion of macro 'VECTORS_BASE'
{ VECTORS_BASE, "Vectors" },
arch/arm/mm/dump.c:71:11: error: 'L_PTE_USER' undeclared here (not in a function); did you mean 'VTIME_USER'?
.mask = L_PTE_USER,
^~~~~~~~~~
Obviously the feature only makes sense with an MMU, so let's add the
dependency here.
Fixes: a8e53c151f ("ARM: 8737/1: mm: dump: add checking for writable and executable")
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Commit 384b38b669 ("ARM: 7873/1: vfp: clear vfp_current_hw_state
for dying cpu") fixed the cpu dying notifier by clearing
vfp_current_hw_state[]. However commit e5b61bafe7 ("arm: Convert VFP
hotplug notifiers to state machine") incorrectly used the original
vfp_force_reload() function in the cpu dying notifier.
Fix it by going back to clearing vfp_current_hw_state[].
Fixes: e5b61bafe7 ("arm: Convert VFP hotplug notifiers to state machine")
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: Kohji Okuno <okuno.kohji@jp.panasonic.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
There's nothing IST-worthy about #BP/int3. We don't allow kprobes
in the small handful of places in the kernel that run at CPL0 with
an invalid stack, and 32-bit kernels have used normal interrupt
gates for #BP forever.
Furthermore, we don't allow kprobes in places that have usergs while
in kernel mode, so "paranoid" is also unnecessary.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Another miscellaneous pile of MIPS fixes for 4.16:
- lantiq: fixes for clocks and Amazon SE (4.14)
- ralink: fix booting on MT7621 (4.5)
- ralink: fix halt (3.9)
-----BEGIN PGP SIGNATURE-----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=77d7
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_4.16_5' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips
Pull MIPS fixes from James Hogan:
"Another miscellaneous pile of MIPS fixes for 4.16:
- lantiq: fixes for clocks and Amazon SE (4.14)
- ralink: fix booting on MT7621 (4.5)
- ralink: fix halt (3.9)"
* tag 'mips_fixes_4.16_5' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
MIPS: ralink: Fix booting on MT7621
MIPS: ralink: Remove ralink_halt()
MIPS: lantiq: ase: Enable MFD_SYSCON
MIPS: lantiq: Enable AHB Bus for USB
MIPS: lantiq: Fix Danube USB clock
Segment registers must be synchronized prior to any code that may
trigger a call to emulation_required()/guest_state_valid(), e.g.
vmx_set_cr0(). Because preparing vmcs02 writes segmentation fields
directly, i.e. doesn't use vmx_set_segment(), emulation_required
will not be re-evaluated when synchronizing the segment registers,
which can result in L0 incorrectly starting emulation of L2.
Fixes: 8665c3f973 ("KVM: nVMX: initialize descriptor cache fields in prepare_vmcs02_full")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
[Move all of prepare_vmcs02_full earlier, not just segment registers. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On POWER9, under some circumstances, a broadcast TLB invalidation
might complete before all previous stores have drained, potentially
allowing stale stores from becoming visible after the invalidation.
This works around it by doubling up those TLB invalidations which was
verified by HW to be sufficient to close the risk window.
This will be documented in a yet-to-be-published errata.
Fixes: 1a472c9dba ("powerpc/mm/radix: Add tlbflush routines")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[mpe: Enable the feature in the DT CPU features code for all Power9,
rename the feature to CPU_FTR_P9_TLBIE_BUG per benh.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
No functionality change. Just code movement to ease code changes later
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
These function are not used in the code. Remove them.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On POWER9 the Nest MMU may fail to invalidate some translations when
doing a tlbie "by PID" or "by LPID" that is targeted at the TLB only
and not the page walk cache.
This works around it by forcing such invalidations to escalate to
RIC=2 (full invalidation of TLB *and* PWC) when a coprocessor is in
use for the context.
Fixes: 03b8abedf4 ("cxl: Enable global TLBIs for cxl contexts")
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[balbirs: fixed spelling and coding style to quiesce checkpatch.pl]
Tested-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, when using coprocessors (which use the Nest MMU), we
simply increment the active_cpu count to force all TLB invalidations
to be come broadcast.
Unfortunately, due to an errata in POWER9, we will need to know
more specifically that coprocessors are in use.
This maintains a separate copros counter in the MMU context for
that purpose.
NB. The commit mentioned in the fixes tag below is not at fault for
the bug we're fixing in this commit and the next, but this fix applies
on top the infrastructure it introduced.
Fixes: 03b8abedf4 ("cxl: Enable global TLBIs for cxl contexts")
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since commit 6964e6a4e4 ("KVM: PPC: Book3S HV: Do SLB load/unload
with guest LPCR value loaded", 2018-01-11), we have been seeing
occasional machine check interrupts on POWER8 systems when running
KVM guests, due to SLB multihit errors.
This turns out to be due to the guest exit code reloading the host
SLB entries from the SLB shadow buffer when the SLB was not previously
cleared in the guest entry path. This can happen because the path
which skips from the guest entry code to the guest exit code without
entering the guest now does the skip before the SLB is cleared and
loaded with guest values, but the host values are loaded after the
point in the guest exit path that we skip to.
To fix this, we move the code that reloads the host SLB values up
so that it occurs just before the point in the guest exit code (the
label guest_bypass:) where we skip to from the guest entry path.
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Fixes: 6964e6a4e4 ("KVM: PPC: Book3S HV: Do SLB load/unload with guest LPCR value loaded")
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Merge misc fixes from Andrew Morton:
"13 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, thp: do not cause memcg oom for thp
mm/vmscan: wake up flushers for legacy cgroups too
Revert "mm: page_alloc: skip over regions of invalid pfns where possible"
mm/shmem: do not wait for lock_page() in shmem_unused_huge_shrink()
mm/thp: do not wait for lock_page() in deferred_split_scan()
mm/khugepaged.c: convert VM_BUG_ON() to collapse fail
x86/mm: implement free pmd/pte page interfaces
mm/vmalloc: add interfaces to free unmapped page table
h8300: remove extraneous __BIG_ENDIAN definition
hugetlbfs: check for pgoff value overflow
lockdep: fix fs_reclaim warning
MAINTAINERS: update Mark Fasheh's e-mail
mm/mempolicy.c: avoid use uninitialized preferred_node
Pull libnvdimm fixes from Dan Williams:
"Two regression fixes, two bug fixes for older issues, two fixes for
new functionality added this cycle that have userspace ABI concerns,
and a small cleanup. These have appeared in a linux-next release and
have a build success report from the 0day robot.
* The 4.16 rework of altmap handling led to some configurations
leaking page table allocations due to freeing from the altmap
reservation rather than the page allocator.
The impact without the fix is leaked memory and a WARN() message
when tearing down libnvdimm namespaces. The rework also missed a
place where error handling code needed to be removed that can lead
to a crash if devm_memremap_pages() fails.
* acpi_map_pxm_to_node() had a latent bug whereby it could
misidentify the closest online node to a given proximity domain.
* Block integrity handling was reworked several kernels back to allow
calling add_disk() after setting up the integrity profile.
The nd_btt and nd_blk drivers are just now catching up to fix
automatic partition detection at driver load time.
* The new peristence_domain attribute, a platform indicator of
whether cpu caches are powerfail protected for example, is meant to
be a single value enum and not a set of flags.
This oversight was caught while reviewing new userspace code in
libndctl to communicate the attribute.
Fix this new enabling up so that we are not stuck with an unwanted
userspace ABI"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm, nfit: fix persistence domain reporting
libnvdimm, region: hide persistence_domain when unknown
acpi, numa: fix pxm to online numa node associations
x86, memremap: fix altmap accounting at free
libnvdimm: remove redundant assignment to pointer 'dev'
libnvdimm, {btt, blk}: do integrity setup before add_disk()
kernel/memremap: Remove stale devres_free() call
Implement pud_free_pmd_page() and pmd_free_pte_page() on x86, which
clear a given pud/pmd entry and free up lower level page table(s).
The address range associated with the pud/pmd entry must have been
purged by INVLPG.
Link: http://lkml.kernel.org/r/20180314180155.19492-3-toshi.kani@hpe.com
Fixes: e61ce6ade4 ("mm: change ioremap to set up huge I/O mappings")
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reported-by: Lei Li <lious.lilei@hisilicon.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may
create pud/pmd mappings. A kernel panic was observed on arm64 systems
with Cortex-A75 in the following steps as described by Hanjun Guo.
1. ioremap a 4K size, valid page table will build,
2. iounmap it, pte0 will set to 0;
3. ioremap the same address with 2M size, pgd/pmd is unchanged,
then set the a new value for pmd;
4. pte0 is leaked;
5. CPU may meet exception because the old pmd is still in TLB,
which will lead to kernel panic.
This panic is not reproducible on x86. INVLPG, called from iounmap,
purges all levels of entries associated with purged address on x86. x86
still has memory leak.
The patch changes the ioremap path to free unmapped page table(s) since
doing so in the unmap path has the following issues:
- The iounmap() path is shared with vunmap(). Since vmap() only
supports pte mappings, making vunmap() to free a pte page is an
overhead for regular vmap users as they do not need a pte page freed
up.
- Checking if all entries in a pte page are cleared in the unmap path
is racy, and serializing this check is expensive.
- The unmap path calls free_vmap_area_noflush() to do lazy TLB purges.
Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB
purge.
Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which
clear a given pud/pmd entry and free up a page for the lower level
entries.
This patch implements their stub functions on x86 and arm64, which work
as workaround.
[akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub]
Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com
Fixes: e61ce6ade4 ("mm: change ioremap to set up huge I/O mappings")
Reported-by: Lei Li <lious.lilei@hisilicon.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Wang Xuefeng <wxf.wang@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Chintan Pandya <cpandya@codeaurora.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A bugfix I did earlier caused a build regression on h8300, which defines
the __BIG_ENDIAN macro in a slightly different way than the generic
code:
arch/h8300/include/asm/byteorder.h:5:0: warning: "__BIG_ENDIAN" redefined
We don't need to define it here, as the same macro is already provided
by the linux/byteorder/big_endian.h, and that version does not conflict.
While this is a v4.16 regression, my earlier patch also got backported
to the 4.14 and 4.15 stable kernels, so we need the fixup there as well.
Link: http://lkml.kernel.org/r/20180313120752.2645129-1-arnd@arndb.de
Fixes: 101110f627 ("Kbuild: always define endianess in kconfig.h")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
force_external_irq_replay() can be called in the do_IRQ path with
interrupts hard enabled and soft disabled if may_hard_irq_enable() set
MSR[EE]=1. It updates local_paca->irq_happened with a load, modify,
store sequence. If a maskable interrupt hits during this sequence, it
will go to the masked handler to be marked pending in irq_happened.
This update will be lost when the interrupt returns and the store
instruction executes. This can result in unpredictable latencies,
timeouts, lockups, etc.
Fix this by ensuring hard interrupts are disabled before modifying
irq_happened.
This could cause any maskable asynchronous interrupt to get lost, but
it was noticed on P9 SMP system doing RDMA NVMe target over 100GbE,
so very high external interrupt rate and high IPI rate. The hang was
bisected down to enabling doorbell interrupts for IPIs. These provided
an interrupt type that could run at high rates in the do_IRQ path,
stressing the race.
Fixes: 1d607bb3bd ("powerpc/irq: Add mechanism to force a replay of interrupts")
Cc: stable@vger.kernel.org # v4.8+
Reported-by: Carol L. Soto <clsoto@us.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull networking fixes from David Miller:
1) Always validate XFRM esn replay attribute, from Florian Westphal.
2) Fix RCU read lock imbalance in xfrm_get_tos(), from Xin Long.
3) Don't try to get firmware dump if not loaded in iwlwifi, from Shaul
Triebitz.
4) Fix BPF helpers to deal with SCTP GSO SKBs properly, from Daniel
Axtens.
5) Fix some interrupt handling issues in e1000e driver, from Benjamin
Poitier.
6) Use strlcpy() in several ethtool get_strings methods, from Florian
Fainelli.
7) Fix rhlist dup insertion, from Paul Blakey.
8) Fix SKB leak in netem packet scheduler, from Alexey Kodanev.
9) Fix driver unload crash when link is up in smsc911x, from Jeremy
Linton.
10) Purge out invalid socket types in l2tp_tunnel_create(), from Eric
Dumazet.
11) Need to purge the write queue when TCP connections are aborted,
otherwise userspace using MSG_ZEROCOPY can't close the fd. From
Soheil Hassas Yeganeh.
12) Fix double free in error path of team driver, from Arkadi
Sharshevsky.
13) Filter fixes for hv_netvsc driver, from Stephen Hemminger.
14) Fix non-linear packet access in ipv6 ndisc code, from Lorenzo
Bianconi.
15) Properly filter out unsupported feature flags in macvlan driver,
from Shannon Nelson.
16) Don't request loading the diag module for a protocol if the protocol
itself is not even registered. From Xin Long.
17) If datagram connect fails in ipv6, make sure the socket state is
consistent afterwards. From Paolo Abeni.
18) Use after free in qed driver, from Dan Carpenter.
19) If received ipv4 PMTU is less than the min pmtu, lock the mtu in the
entry. From Sabrina Dubroca.
20) Fix sleep in atomic in tg3 driver, from Jonathan Toppins.
21) Fix vlan in vlan untagging in some situations, from Toshiaki Makita.
22) Fix double SKB free in genlmsg_mcast(). From Nicolas Dichtel.
23) Fix NULL derefs in error paths of tcf_*_init(), from Davide Caratti.
24) Unbalanced PM runtime calls in FEC driver, from Florian Fainelli.
25) Memory leak in gemini driver, from Igor Pylypiv.
26) IDR leaks in error paths of tcf_*_init() functions, from Davide
Caratti.
27) Need to use GFP_ATOMIC in seg6_build_state(), from David Lebrun.
28) Missing dev_put() in error path of macsec_newlink(), from Dan
Carpenter.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (201 commits)
macsec: missing dev_put() on error in macsec_newlink()
net: dsa: Fix functional dsa-loop dependency on FIXED_PHY
hv_netvsc: common detach logic
hv_netvsc: change GPAD teardown order on older versions
hv_netvsc: use RCU to fix concurrent rx and queue changes
hv_netvsc: disable NAPI before channel close
net/ipv6: Handle onlink flag with multipath routes
ppp: avoid loop in xmit recursion detection code
ipv6: sr: fix NULL pointer dereference when setting encap source address
ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state
net: aquantia: driver version bump
net: aquantia: Implement pci shutdown callback
net: aquantia: Allow live mac address changes
net: aquantia: Add tx clean budget and valid budget handling logic
net: aquantia: Change inefficient wait loop on fw data reads
net: aquantia: Fix a regression with reset on old firmware
net: aquantia: Fix hardware reset when SPI may rarely hangup
s390/qeth: on channel error, reject further cmd requests
s390/qeth: lock read device while queueing next buffer
s390/qeth: when thread completes, wake up all waiters
...
Since commit 3af5a67c86 ("MIPS: Fix early CM probing") the MT7621 has
not been able to boot.
This commit caused mips_cm_probe() to be called before
mt7621.c::proc_soc_init().
prom_soc_init() has a comment explaining that mips_cm_probe() "wipes out
the bootloader config" and means that configuration registers are no
longer available. It has some code to re-enable this config.
Before this re-enable code is run, the sysc register cannot be read, so
when SYSC_REG_CHIP_NAME0 is read, a garbage value is returned and
panic() is called.
If we move the config-repair code to the top of prom_soc_init(), the
registers can be read and boot can proceed.
Very occasionally, the first register read after the reconfiguration
returns garbage, so add a call to __sync().
Fixes: 3af5a67c86 ("MIPS: Fix early CM probing")
Signed-off-by: NeilBrown <neil@brown.name>
Reviewed-by: Matt Redfearn <matt.redfearn@mips.com>
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.5+
Patchwork: https://patchwork.linux-mips.org/patch/18859/
Signed-off-by: James Hogan <jhogan@kernel.org>
ralink_halt() does nothing that machine_halt() doesn't already do, so it
adds no value.
It actually causes incorrect behaviour due to the "unreachable()" at the
end. This tells the compiler that the end of the function will never be
reached, which isn't true. The compiler responds by not adding a
'return' instruction, so control simply moves on to whatever bytes come
afterwards in memory. In my tested, that was the ralink_restart()
function. This means that an attempt to 'halt' the machine would
actually cause a reboot.
So remove ralink_halt() so that a 'halt' really does halt.
Fixes: c06e836ada ("MIPS: ralink: adds reset code")
Signed-off-by: NeilBrown <neil@brown.name>
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.9+
Patchwork: https://patchwork.linux-mips.org/patch/18851/
Signed-off-by: James Hogan <jhogan@kernel.org>
Enable syscon to use it for the RCU MFD on Amazon SE as well.
The Amazon SE also has similar reset controller system as Danube and
XWAY and use their drivers mostly. As these drivers now need syscon also
activate the syscon subsystem for for Amazon SE.
Fixes: 2b6639d4c7 ("MIPS: lantiq: Enable MFD_SYSCON to be able to use it for the RCU MFD")
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.14+
Patchwork: https://patchwork.linux-mips.org/patch/18817/
Signed-off-by: James Hogan <jhogan@kernel.org>
On Danube and AR9 the USB core is connected though a AHB bus to the main
system cross bar, hence we need to enable the gating clock of the AHB
Bus as well to make the USB controller work.
Fixes: dea54fbad3 ("phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module")
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.14+
Patchwork: https://patchwork.linux-mips.org/patch/18814/
Signed-off-by: James Hogan <jhogan@kernel.org>
On Danube the USB0 controller registers are at 1e101000 and the USB0 PHY
register is at 1f203018 similar to all other lantiq SoCs. Activate the
USB controller gating clock thorough the USB controller driver and not
the PHY.
This fixes a problem introduced in a previous commit.
Fixes: dea54fbad3 ("phy: Add an USB PHY driver for the Lantiq SoCs using the RCU module")
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.14+
Patchwork: https://patchwork.linux-mips.org/patch/18816/
Signed-off-by: James Hogan <jhogan@kernel.org>
We are still using custom SRAM code for some SoCs and are not marking
the PM code mapped to SRAM as read-only and executable after we're
done. With CONFIG_DEBUG_WX=y, we will get "Found insecure W+X mapping
at address" warning.
Let's fix this issue the same way as commit 728bbe75c8 ("misc: sram:
Introduce support code for protect-exec sram type") is doing for
drivers/misc/sram-exec.c.
On omap3, we need to restore SRAM when returning from off mode after
idle, so init time configuration is not enough.
And as we no longer have users for omap_sram_push_address() we can
make it static while at it.
Note that eventually we should be using sram-exec.c for all SoCs.
Cc: stable@vger.kernel.org # v4.12+
Cc: Dave Gerlach <d-gerlach@ti.com>
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The undocumented 'icebp' instruction (aka 'int1') works pretty much like
'int3' in the absense of in-circuit probing equipment (except,
obviously, that it raises #DB instead of raising #BP), and is used by
some validation test-suites as such.
But Andy Lutomirski noticed that his test suite acted differently in kvm
than on bare hardware.
The reason is that kvm used an inexact test for the icebp instruction:
it just assumed that an all-zero VM exit qualification value meant that
the VM exit was due to icebp.
That is not unlike the guess that do_debug() does for the actual
exception handling case, but it's purely a heuristic, not an absolute
rule. do_debug() does it because it wants to ascribe _some_ reasons to
the #DB that happened, and an empty %dr6 value means that 'icebp' is the
most likely casue and we have no better information.
But kvm can just do it right, because unlike the do_debug() case, kvm
actually sees the real reason for the #DB in the VM-exit interruption
information field.
So instead of relying on an inexact heuristic, just use the actual VM
exit information that says "it was 'icebp'".
Right now the 'icebp' instruction isn't technically documented by Intel,
but that will hopefully change. The special "privileged software
exception" information _is_ actually mentioned in the Intel SDM, even
though the cause of it isn't enumerated.
Reported-by: Andy Lutomirski <luto@kernel.org>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Writing to it directly does not work for Xen PV guests.
Fixes: 49275fef98 ("x86/vsyscall/64: Explicitly set _PAGE_USER in the pagetable hierarchy")
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180319143154.3742-1-boris.ostrovsky@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There were only a few Pentium Pro multiprocessors systems where this
errata applied. They are more than 20 years old now, and we've slowly
dropped places which put the workarounds in and discouraged anyone
from enabling the workaround.
Get rid of it for good.
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-2-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
