We should not return with a lock.
We also have to increase the address when we do page clearing.
Fixes: bd096f6443 ("KVM: s390: Add skey emulation fault handling")
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20180830081355.59234-1-frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
For x86 this brings in PCID emulation and CR3 caching for shadow page
tables, nested VMX live migration, nested VMCS shadowing, an optimized
IPI hypercall, and some optimizations.
ARM will come next week.
There is a semantic conflict because tip also added an .init_platform
callback to kvm.c. Please keep the initializer from this branch,
and add a call to kvmclock_init (added by tip) inside kvm_init_platform
(added here).
Also, there is a backmerge from 4.18-rc6. This is because of a
refactoring that conflicted with a relatively late bugfix and
resulted in a particularly hellish conflict. Because the conflict
was only due to unfortunate timing of the bugfix, I backmerged and
rebased the refactoring rather than force the resolution on you.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJbdwNFAAoJEL/70l94x66DiPEH/1cAGZWGd85Y3yRu1dmTmqiz
kZy0V+WTQ5kyJF4ZsZKKOp+xK7Qxh5e9kLdTo70uPZCHwLu9IaGKN9+dL9Jar3DR
yLPX5bMsL8UUed9g9mlhdaNOquWi7d7BseCOnIyRTolb+cqnM5h3sle0gqXloVrS
UQb4QogDz8+86czqR8tNfazjQRKW/D2HEGD5NDNVY1qtpY+leCDAn9/u6hUT5c6z
EtufgyDh35UN+UQH0e2605gt3nN3nw3FiQJFwFF1bKeQ7k5ByWkuGQI68XtFVhs+
2WfqL3ftERkKzUOy/WoSJX/C9owvhMcpAuHDGOIlFwguNGroZivOMVnACG1AI3I=
=9Mgw
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull first set of KVM updates from Paolo Bonzini:
"PPC:
- minor code cleanups
x86:
- PCID emulation and CR3 caching for shadow page tables
- nested VMX live migration
- nested VMCS shadowing
- optimized IPI hypercall
- some optimizations
ARM will come next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (85 commits)
kvm: x86: Set highest physical address bits in non-present/reserved SPTEs
KVM/x86: Use CC_SET()/CC_OUT in arch/x86/kvm/vmx.c
KVM: X86: Implement PV IPIs in linux guest
KVM: X86: Add kvm hypervisor init time platform setup callback
KVM: X86: Implement "send IPI" hypercall
KVM/x86: Move X86_CR4_OSXSAVE check into kvm_valid_sregs()
KVM: x86: Skip pae_root shadow allocation if tdp enabled
KVM/MMU: Combine flushing remote tlb in mmu_set_spte()
KVM: vmx: skip VMWRITE of HOST_{FS,GS}_BASE when possible
KVM: vmx: skip VMWRITE of HOST_{FS,GS}_SEL when possible
KVM: vmx: always initialize HOST_{FS,GS}_BASE to zero during setup
KVM: vmx: move struct host_state usage to struct loaded_vmcs
KVM: vmx: compute need to reload FS/GS/LDT on demand
KVM: nVMX: remove a misleading comment regarding vmcs02 fields
KVM: vmx: rename __vmx_load_host_state() and vmx_save_host_state()
KVM: vmx: add dedicated utility to access guest's kernel_gs_base
KVM: vmx: track host_state.loaded using a loaded_vmcs pointer
KVM: vmx: refactor segmentation code in vmx_save_host_state()
kvm: nVMX: Fix fault priority for VMX operations
kvm: nVMX: Fix fault vector for VMX operation at CPL > 0
...
Pull s390 updates from Heiko Carstens:
"Since Martin is on vacation you get the s390 pull request from me:
- Host large page support for KVM guests. As the patches have large
impact on arch/s390/mm/ this series goes out via both the KVM and
the s390 tree.
- Add an option for no compression to the "Kernel compression mode"
menu, this will come in handy with the rework of the early boot
code.
- A large rework of the early boot code that will make life easier
for KASAN and KASLR. With the rework the bootable uncompressed
image is not generated anymore, only the bzImage is available. For
debuggung purposes the new "no compression" option is used.
- Re-enable the gcc plugins as the issue with the latent entropy
plugin is solved with the early boot code rework.
- More spectre relates changes:
+ Detect the etoken facility and remove expolines automatically.
+ Add expolines to a few more indirect branches.
- A rewrite of the common I/O layer trace points to make them
consumable by 'perf stat'.
- Add support for format-3 PCI function measurement blocks.
- Changes for the zcrypt driver:
+ Add attributes to indicate the load of cards and queues.
+ Restructure some code for the upcoming AP device support in KVM.
- Build flags improvements in various Makefiles.
- A few fixes for the kdump support.
- A couple of patches for gcc 8 compile warning cleanup.
- Cleanup s390 specific proc handlers.
- Add s390 support to the restartable sequence self tests.
- Some PTR_RET vs PTR_ERR_OR_ZERO cleanup.
- Lots of bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (107 commits)
s390/dasd: fix hanging offline processing due to canceled worker
s390/dasd: fix panic for failed online processing
s390/mm: fix addressing exception after suspend/resume
rseq/selftests: add s390 support
s390: fix br_r1_trampoline for machines without exrl
s390/lib: use expoline for all bcr instructions
s390/numa: move initial setup of node_to_cpumask_map
s390/kdump: Fix elfcorehdr size calculation
s390/cpum_sf: save TOD clock base in SDBs for time conversion
KVM: s390: Add huge page enablement control
s390/mm: Add huge page gmap linking support
s390/mm: hugetlb pages within a gmap can not be freed
KVM: s390: Add skey emulation fault handling
s390/mm: Add huge pmd storage key handling
s390/mm: Clear skeys for newly mapped huge guest pmds
s390/mm: Clear huge page storage keys on enable_skey
s390/mm: Add huge page dirty sync support
s390/mm: Add gmap pmd invalidation and clearing
s390/mm: Add gmap pmd notification bit setting
s390/mm: Add gmap pmd linking
...
- must be enabled via module parameter hpage=1
- cannot be used together with nested
- does support migration
- does support hugetlbfs
- no THP yet
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Y0Wl
-----END PGP SIGNATURE-----
Merge tag 'hlp_stage1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvms390/next
KVM: s390: initial host large page support
- must be enabled via module parameter hpage=1
- cannot be used together with nested
- does support migration
- does support hugetlbfs
- no THP yet
General KVM huge page support on s390 has to be enabled via the
kvm.hpage module parameter. Either nested or hpage can be enabled, as
we currently do not support vSIE for huge backed guests. Once the vSIE
support is added we will either drop the parameter or enable it as
default.
For a guest the feature has to be enabled through the new
KVM_CAP_S390_HPAGE_1M capability and the hpage module
parameter. Enabling it means that cmm can't be enabled for the vm and
disables pfmf and storage key interpretation.
This is due to the fact that in some cases, in upcoming patches, we
have to split huge pages in the guest mapping to be able to set more
granular memory protection on 4k pages. These split pages have fake
page tables that are not visible to the Linux memory management which
subsequently will not manage its PGSTEs, while the SIE will. Disabling
these features lets us manage PGSTE data in a consistent matter and
solve that problem.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Let's introduce an explicit check if skeys have already been enabled
for the vcpu, so we don't have to check the mm context if we don't have
the storage key facility.
This lets us check for enablement without having to take the mm
semaphore and thus speedup skey emulation.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When doing skey emulation for huge guests, we now need to fault in
pmds, as we don't have PGSTES anymore to store them when we do not
have valid table entries.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
To do dirty loging with huge pages, we protect huge pmds in the
gmap. When they are written to, we unprotect them and mark them dirty.
We introduce the function gmap_test_and_clear_dirty_pmd which handles
dirty sync for huge pages.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
We want to provide facility 156 (etoken facility) to our
guests. This includes migration support (via sync regs) and
VSIE changes. The tokens are being reset on clear reset. This
has to be implemented by userspace (via sync regs).
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
This is a non-functional change that avoids
arch/s390/kvm/vsie.c:839:25: warning: context imbalance in 'do_vsie_run' - unexpected unlock
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This is a fix for several issues that were found in the original code
for storage attributes migration.
Now no bitmap is allocated to keep track of dirty storage attributes;
the extra bits of the per-memslot bitmap that are always present anyway
are now used for this purpose.
The code has also been refactored a little to improve readability.
Fixes: 190df4a212 ("KVM: s390: CMMA tracking, ESSA emulation, migration mode")
Fixes: 4036e3874a ("KVM: s390: ioctls to get and set guest storage attributes")
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Message-Id: <1525106005-13931-3-git-send-email-imbrenda@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
kvm_clear_guest also does the dirty tracking for us, which we want to
have.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
- Additional struct_size() conversions (Matthew, Kees)
- Explicitly reported overflow fixes (Silvio, Kees)
- Add missing kvcalloc() function (Kees)
- Treewide conversions of allocators to use either 2-factor argument
variant when available, or array_size() and array3_size() as needed (Kees)
-----BEGIN PGP SIGNATURE-----
Comment: Kees Cook <kees@outflux.net>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=zUUp
-----END PGP SIGNATURE-----
Merge tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more overflow updates from Kees Cook:
"The rest of the overflow changes for v4.18-rc1.
This includes the explicit overflow fixes from Silvio, further
struct_size() conversions from Matthew, and a bug fix from Dan.
But the bulk of it is the treewide conversions to use either the
2-factor argument allocators (e.g. kmalloc(a * b, ...) into
kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a *
b) into vmalloc(array_size(a, b)).
Coccinelle was fighting me on several fronts, so I've done a bunch of
manual whitespace updates in the patches as well.
Summary:
- Error path bug fix for overflow tests (Dan)
- Additional struct_size() conversions (Matthew, Kees)
- Explicitly reported overflow fixes (Silvio, Kees)
- Add missing kvcalloc() function (Kees)
- Treewide conversions of allocators to use either 2-factor argument
variant when available, or array_size() and array3_size() as needed
(Kees)"
* tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
treewide: Use array_size in f2fs_kvzalloc()
treewide: Use array_size() in f2fs_kzalloc()
treewide: Use array_size() in f2fs_kmalloc()
treewide: Use array_size() in sock_kmalloc()
treewide: Use array_size() in kvzalloc_node()
treewide: Use array_size() in vzalloc_node()
treewide: Use array_size() in vzalloc()
treewide: Use array_size() in vmalloc()
treewide: devm_kzalloc() -> devm_kcalloc()
treewide: devm_kmalloc() -> devm_kmalloc_array()
treewide: kvzalloc() -> kvcalloc()
treewide: kvmalloc() -> kvmalloc_array()
treewide: kzalloc_node() -> kcalloc_node()
treewide: kzalloc() -> kcalloc()
treewide: kmalloc() -> kmalloc_array()
mm: Introduce kvcalloc()
video: uvesafb: Fix integer overflow in allocation
UBIFS: Fix potential integer overflow in allocation
leds: Use struct_size() in allocation
Convert intel uncore to struct_size
...
* ARM: lazy context-switching of FPSIMD registers on arm64, "split"
regions for vGIC redistributor
* s390: cleanups for nested, clock handling, crypto, storage keys and
control register bits
* x86: many bugfixes, implement more Hyper-V super powers,
implement lapic_timer_advance_ns even when the LAPIC timer
is emulated using the processor's VMX preemption timer. Two
security-related bugfixes at the top of the branch.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJbH8Z/AAoJEL/70l94x66DF+UIAJeOuTp6LGasT/9uAb2OovaN
+5kGmOPGFwkTcmg8BQHI2fXT4vhxMXWPFcQnyig9eXJVxhuwluXDOH4P9IMay0yw
VDCBsWRdMvZDQad2hn6Z5zR4Jx01XrSaG/KqvXbbDKDCy96mWG7SYAY2m3ZwmeQi
3Pa3O3BTijr7hBYnMhdXGkSn4ZyU8uPaAgIJ8795YKeOJ2JmioGYk6fj6y2WCxA3
ztJymBjTmIoZ/F8bjuVouIyP64xH4q9roAyw4rpu7vnbWGqx1fjPYJoB8yddluWF
JqCPsPzhKDO7mjZJy+lfaxIlzz2BN7tKBNCm88s5GefGXgZwk3ByAq/0GQ2M3rk=
=H5zI
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"Small update for KVM:
ARM:
- lazy context-switching of FPSIMD registers on arm64
- "split" regions for vGIC redistributor
s390:
- cleanups for nested
- clock handling
- crypto
- storage keys
- control register bits
x86:
- many bugfixes
- implement more Hyper-V super powers
- implement lapic_timer_advance_ns even when the LAPIC timer is
emulated using the processor's VMX preemption timer.
- two security-related bugfixes at the top of the branch"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (79 commits)
kvm: fix typo in flag name
kvm: x86: use correct privilege level for sgdt/sidt/fxsave/fxrstor access
KVM: x86: pass kvm_vcpu to kvm_read_guest_virt and kvm_write_guest_virt_system
KVM: x86: introduce linear_{read,write}_system
kvm: nVMX: Enforce cpl=0 for VMX instructions
kvm: nVMX: Add support for "VMWRITE to any supported field"
kvm: nVMX: Restrict VMX capability MSR changes
KVM: VMX: Optimize tscdeadline timer latency
KVM: docs: nVMX: Remove known limitations as they do not exist now
KVM: docs: mmu: KVM support exposing SLAT to guests
kvm: no need to check return value of debugfs_create functions
kvm: Make VM ioctl do valloc for some archs
kvm: Change return type to vm_fault_t
KVM: docs: mmu: Fix link to NPT presentation from KVM Forum 2008
kvm: x86: Amend the KVM_GET_SUPPORTED_CPUID API documentation
KVM: x86: hyperv: declare KVM_CAP_HYPERV_TLBFLUSH capability
KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE}_EX implementation
KVM: x86: hyperv: simplistic HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE} implementation
KVM: introduce kvm_make_vcpus_request_mask() API
KVM: x86: hyperv: do rep check for each hypercall separately
...
Pull timers and timekeeping updates from Thomas Gleixner:
- Core infrastucture work for Y2038 to address the COMPAT interfaces:
+ Add a new Y2038 safe __kernel_timespec and use it in the core
code
+ Introduce config switches which allow to control the various
compat mechanisms
+ Use the new config switch in the posix timer code to control the
32bit compat syscall implementation.
- Prevent bogus selection of CPU local clocksources which causes an
endless reselection loop
- Remove the extra kthread in the clocksource code which has no value
and just adds another level of indirection
- The usual bunch of trivial updates, cleanups and fixlets all over the
place
- More SPDX conversions
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
clocksource/drivers/mxs_timer: Switch to SPDX identifier
clocksource/drivers/timer-imx-tpm: Switch to SPDX identifier
clocksource/drivers/timer-imx-gpt: Switch to SPDX identifier
clocksource/drivers/timer-imx-gpt: Remove outdated file path
clocksource/drivers/arc_timer: Add comments about locking while read GFRC
clocksource/drivers/mips-gic-timer: Add pr_fmt and reword pr_* messages
clocksource/drivers/sprd: Fix Kconfig dependency
clocksource: Move inline keyword to the beginning of function declarations
timer_list: Remove unused function pointer typedef
timers: Adjust a kernel-doc comment
tick: Prefer a lower rating device only if it's CPU local device
clocksource: Remove kthread
time: Change nanosleep to safe __kernel_* types
time: Change types to new y2038 safe __kernel_* types
time: Fix get_timespec64() for y2038 safe compat interfaces
time: Add new y2038 safe __kernel_timespec
posix-timers: Make compat syscalls depend on CONFIG_COMPAT_32BIT_TIME
time: Introduce CONFIG_COMPAT_32BIT_TIME
time: Introduce CONFIG_64BIT_TIME in architectures
compat: Enable compat_get/put_timespec64 always
...
Use new return type vm_fault_t for fault handler. For
now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.
commit 1c8f422059 ("mm: change return type to vm_fault_t")
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes it certainly more readable.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
By missing an "L", we might detect some addresses to be <8k,
although they are not.
e.g. for itdba = 100001fff
!(gpa & ~0x1fffU) -> 1
!(gpa & ~0x1fffUL) -> 0
So we would report a SIE validity intercept although everything is fine.
Fixes: 166ecb3 ("KVM: s390: vsie: support transactional execution")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Move the Multiple-epoch facility handling into it and rename it to
kvm_s390_get_tod_clock().
This leaves us with:
- kvm_s390_set_tod_clock()
- kvm_s390_get_tod_clock()
- kvm_s390_get_tod_clock_fast()
So all Multiple-epoch facility is hidden in these functions.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
KVM is allocated with kzalloc(), so these members are already 0.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In KVM code we use masks to test/set control registers.
Let's define the ones we use in arch/s390/include/asm/ctl_reg.h and
replace all occurrences in KVM code.
As we will be needing the define for Clock-comparator sign control soon,
let's also add it.
Suggested-by: Collin L. Walling <walling@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Introduces a new function to reset the crypto attributes for all
vcpus whether they are running or not. Each vcpu in KVM will
be removed from SIE prior to resetting the crypto attributes in its
SIE state description. After all vcpus have had their crypto attributes
reset the vcpus will be restored to SIE.
This function is incorporated into the kvm_s390_vm_set_crypto(kvm)
function to fix a reported issue whereby the crypto key wrapping
attributes could potentially get out of synch for running vcpus.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reported-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Up to now we always expected to have the storage key facility
available for our (non-VSIE) KVM guests. For huge page support, we
need to be able to disable it, so let's introduce that now.
We add the use_skf variable to manage KVM storage key facility
usage. Also we rename use_skey in the mm context struct to uses_skeys
to make it more clear that it is an indication that the vm actively
uses storage keys.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
For testing the exitless interrupt support it turned out useful to
have separate counters for inject and delivery of I/O interrupt.
While at it do the same for all interrupt types. For timer
related interrupts (clock comparator and cpu timer) we even had
no delivery counters. Fix this as well. On this way some counters
are being renamed to have a similar name.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
This counter can be used for administration, debug or test purposes.
Suggested-by: Vladislav Mironov <mironov@de.ibm.com>
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
A case statement in kvm_s390_shadow_tables uses fallthrough annotations
which are not recognized by gcc because they are hidden within a block.
Move these annotations out of the block to fix (W=1) warnings like below:
arch/s390/kvm/gaccess.c: In function 'kvm_s390_shadow_tables':
arch/s390/kvm/gaccess.c:1029:26: warning: this statement may fall through [-Wimplicit-fallthrough=]
case ASCE_TYPE_REGION1: {
^
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We want to count IO exit requests in kvm_stat. At the same time
we can get rid of the handle_noop function.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
use_cmma in kvm_arch means that the KVM hypervisor is allowed to use
cmma, whereas use_cmma in the mm context means cmm has been used before.
Let's rename the context one to uses_cmm, as the vm does use
collaborative memory management but the host uses the cmm assist
(interpretation facility).
Also let's introduce use_pfmfi, so we can remove the pfmfi disablement
when we activate cmma and rather not activate it in the first place.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Message-Id: <1518779775-256056-2-git-send-email-frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Some facilities should only be provided to the guest, if they are
enabled by a CPU model. This allows us to avoid capabilities and
to simply fall back to the cpumodel for deciding about a facility
without enabling it for older QEMUs or QEMUs without a CPU
model.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Even if we don't have extended SCA support, we can have more than 64 CPUs
if we don't enable any HW features that might use the SCA entries.
Now, this works just fine, but we missed a return, which is why we
would actually store the SCA entries. If we have more than 64 CPUs, this
means writing outside of the basic SCA - bad.
Let's fix this. This allows > 64 CPUs when running nested (under vSIE)
without random crashes.
Fixes: a6940674c3 ("KVM: s390: allow 255 VCPUs when sca entries aren't used")
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180306132758.21034-1-david@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We already count io interrupts, but we forgot to print them.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: d8346b7d9b ("KVM: s390: Support for I/O interrupts.")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Right now, SET CLOCK called in the guest does not properly take care of
the epoch index, as the call goes via the old kvm_s390_set_tod_clock()
interface. So the epoch index is neither reset to 0, if required, nor
properly set to e.g. 0xff on negative values.
Fix this by providing a single kvm_s390_set_tod_clock() function. Move
Multiple-epoch facility handling into it.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180207114647.6220-3-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: 8fa1696ea7 ("KVM: s390: Multiple Epoch Facility support")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
For now, we don't take care of over/underflows. Especially underflows
are critical:
Assume the epoch is currently 0 and we get a sync request for delta=1,
meaning the TOD is moved forward by 1 and we have to fix it up by
subtracting 1 from the epoch. Right now, this will leave the epoch
index untouched, resulting in epoch=-1, epoch_idx=0, which is wrong.
We have to take care of over and underflows, also for the VSIE case. So
let's factor out calculation into a separate function.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180207114647.6220-5-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: 8fa1696ea7 ("KVM: s390: Multiple Epoch Facility support")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[use u8 for idx]
Missed when enabling the Multiple-epoch facility. If the facility is
installed and the control is set, a sign based comaprison has to be
performed.
Right now we would inject wrong interrupts and ignore interrupt
conditions. Also the sleep time is calculated in a wrong way.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180207114647.6220-2-david@redhat.com>
Fixes: 8fa1696ea7 ("KVM: s390: Multiple Epoch Facility support")
Cc: stable@vger.kernel.org
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Just like for the interception handlers, let's also use a switch-case
in our interrupt delivery code.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180206141743.24497-1-david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Instead of having huge jump tables for function selection,
let's use normal switch/case statements for the instruction
handlers in intercept.c We can now also get rid of
intercept_handler_t.
This allows the compiler to make the right decision depending
on the situation (e.g. avoid jump-tables for thunks).
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Instead of having huge jump tables for function selection,
let's use normal switch/case statements for the instruction
handlers in priv.c
This allows the compiler to make the right decision depending
on the situation (e.g. avoid jump-tables for thunks).
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If the guest runs with bp isolation when doing a SIE instruction,
we must also run the nested guest with bp isolation when emulating
that SIE instruction.
This is done by activating BPBC in the lpar, which acts as an override
for lower level guests.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If GISA is available, we do not have to kick CPUs out of SIE to deliver
interrupts. The hardware can deliver such interrupts while running.
Cc: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
For interrupt injection of floating interrupts we queue the interrupt
either in the GISA or in the floating interrupt list. The first CPU
that looks at these data structures - either in KVM code or hardware
will then deliver that interrupt. To minimize latency we also:
-a: choose a VCPU to deliver that interrupt. We prefer idle CPUs
-b: we wake up the host thread that runs the VCPU
-c: set an I/O intervention bit for that CPU so that it exits guest
context as soon as the PSW I/O mask is enabled
This will make sure that this CPU will execute the interrupt delivery
code of KVM very soon.
We can now optimize the injection case if we have exitless interrupts.
The wakeup is still necessary in case the target CPU sleeps. We can
avoid the I/O intervention request bit though. Whenever this
intervention request would be handled, the hardware could also directly
inject the interrupt on that CPU, no need to go through the interrupt
injection loop of KVM.
Cc: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The patch modifies the previously defined GISA data structure to be
able to store two GISA formats, format-0 and format-1. Additionally,
it verifies the availability of the GISA format facility and enables
the use of a format-1 GISA in the SIE control block accordingly.
A format-1 can do everything that format-0 can and we will need it
for real HW passthrough. As there are systems with only format-0
we keep both variants.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If the AIV facility is available, a GISA will be used to manage emulated
adapter interrupts.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The function returns a pending I/O interrupt with the highest
priority defined by its ISC.
Together with AIV activation, pending adapter interrupts are
managed by the GISA IPM. Thus kvm_s390_get_io_int() needs to
inspect the IPM as well when the interrupt with the highest
priority has to be identified.
In case classic and adapter interrupts with the same ISC are
pending, the classic interrupt will be returned first.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Pending interrupts marked in the GISA IPM are required to
become part of the answer of ioctl KVM_DEV_FLIC_GET_ALL_IRQS.
The ioctl KVM_DEV_FLIC_ENQUEUE is already capable to enqueue
adapter interrupts when a GISA is present.
With ioctl KVM_DEV_FLIC_CLEAR_IRQS the GISA IPM wil be cleared
now as well.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The function isc_to_int_word() allows the generation of interruption
words for adapter interrupts.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The adapter interruption virtualization (AIV) facility is an
optional facility that comes with functionality expected to increase
the performance of adapter interrupt handling for both emulated and
passed-through adapter interrupts. With AIV, adapter interrupts can be
delivered to the guest without exiting SIE.
This patch provides some preparations for using AIV for emulated adapter
interrupts (including virtio) if it's available. When using AIV, the
interrupts are delivered at the so called GISA by setting the bit
corresponding to its Interruption Subclass (ISC) in the Interruption
Pending Mask (IPM) instead of inserting a node into the floating interrupt
list.
To keep the change reasonably small, the handling of this new state is
deferred in get_all_floating_irqs and handle_tpi. This patch concentrates
on the code handling enqueuement of emulated adapter interrupts, and their
delivery to the guest.
Note that care is still required for adapter interrupts using AIV,
because there is no guarantee that AIV is going to deliver the adapter
interrupts pending at the GISA (consider all vcpus idle). When delivering
GISA adapter interrupts by the host (usual mechanism) special attention
is required to honor interrupt priorities.
Empirical results show that the time window between making an interrupt
pending at the GISA and doing kvm_s390_deliver_pending_interrupts is
sufficient for a guest with at least moderate cpu activity to get adapter
interrupts delivered within the SIE, and potentially save some SIE exits
(if not other deliverable interrupts).
The code will be activated with a follow-up patch.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The patch implements routines to access the GISA to test and modify
its Interruption Pending Mask (IPM) from the host side.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In preperation to support pass-through adapter interrupts, the Guest
Interruption State Area (GISA) and the Adapter Interruption Virtualization
(AIV) features will be introduced here.
This patch introduces format-0 GISA (that is defines the struct describing
the GISA, allocates storage for it, and introduces fields for the
GISA address in kvm_s390_sie_block and kvm_s390_vsie).
As the GISA requires storage below 2GB, it is put in sie_page2, which is
already allocated in ZONE_DMA. In addition, The GISA requires alignment to
its integral boundary. This is already naturally aligned via the
padding in the sie_page2.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch prepares a simplification of bit operations between the irq
pending mask for emulated interrupts and the Interruption Pending Mask
(IPM) which is part of the Guest Interruption State Area (GISA), a feature
that allows interrupt delivery to guests by means of the SIE instruction.
Without that change, a bit-wise *or* operation on parts of these two masks
would either require a look-up table of size 256 bytes to map the IPM
to the emulated irq pending mask bit orientation (all bits mirrored at half
byte) or a sequence of up to 8 condidional branches to perform tests of
single bit positions. Both options are to be rejected either by performance
or space utilization reasons.
Beyond that this change will be transparent.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Use it just like kvm_s390_set_cpuflags() and kvm_s390_clear_cpuflags().
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-5-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Use it just like kvm_s390_set_cpuflags().
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-4-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Use it in all places where we set cpuflags.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-3-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
No need to make this function special. Move it to a header right away.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180123170531.13687-2-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The overall instruction counter is larger than the sum of the
single counters. We should try to catch all instruction handlers
to make this match the summary counter.
Let us add sck,tb,sske,iske,rrbe,tb,tpi,tsch,lpsw,pswe....
and remove other unused ones.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
This fixes races and potential use after free in the
cmma migration code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=aAYd
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-master-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux
KVM: s390: another fix for cmma migration
This fixes races and potential use after free in the
cmma migration code.
Make the diagnose counters also appear as instruction counters.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Some parts of the cmma migration bitmap is already protected
with the kvm->lock (e.g. the migration start). On the other
hand the read of the cmma bits is not protected against a
concurrent free, neither is the emulation of the ESSA instruction.
Let's extend the locking to all related ioctls by using
the slots lock for
- kvm_s390_vm_start_migration
- kvm_s390_vm_stop_migration
- kvm_s390_set_cmma_bits
- kvm_s390_get_cmma_bits
In addition to that, we use synchronize_srcu before freeing
the migration structure as all users hold kvm->srcu for read.
(e.g. the ESSA handler).
Reported-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org # 4.13+
Fixes: 190df4a212 (KVM: s390: CMMA tracking, ESSA emulation, migration mode)
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
This way, the values cannot change, even if another VCPU might try to
mess with the nested SCB currently getting executed by another VCPU.
We now always use the same gpa for pinning and unpinning a page (for
unpinning, it is only relevant to mark the guest page dirty for
migration).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180116171526.12343-3-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Another VCPU might try to modify the SCB while we are creating the
shadow SCB. In general this is no problem - unless the compiler decides
to not load values once, but e.g. twice.
For us, this is only relevant when checking/working with such values.
E.g. the prefix value, the mso, state of transactional execution and
addresses of satellite blocks.
E.g. if we blindly forward values (e.g. general purpose registers or
execution controls after masking), we don't care.
Leaving unpin_blocks() untouched for now, will handle it separately.
The worst thing right now that I can see would be a missed prefix
un/remap (mso, prefix, tx) or using wrong guest addresses. Nothing
critical, but let's try to avoid unpredictable behavior.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180116171526.12343-2-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The new firmware interfaces for branch prediction behaviour changes
are transparently available for the guest. Nevertheless, there is
new state attached that should be migrated and properly resetted.
Provide a mechanism for handling reset, migration and VSIE.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[Changed capability number to 152. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
- add the virtio-ccw transport for kvmconfig
- more debug tracing for cpu model
- cleanups and fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Cc57
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux
KVM: s390: Fixes and features for 4.16
- add the virtio-ccw transport for kvmconfig
- more debug tracing for cpu model
- cleanups and fixes
"wq" is not used at all. "cpuflags" can be access directly via the vcpu,
just as "float_int" via vcpu->kvm.
While at it, reuse _set_cpuflag() to make the code look nicer.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180108193747.10818-1-david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
It is not required to take to a lock to protect access to the cpuflags
of the local interrupt structure of a vcpu as the performed operation
is an atomic_or.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The cpu model already traces the cpu facilities, the ibc and
guest CPU ids. We should do the same for the cpu features (on
success only).
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
commit a03825bbd0 ("KVM: s390: use kvm->created_vcpus") introduced
kvm->created_vcpus to avoid races with the existing kvm->online_vcpus
scheme. One place was "forgotten" and one new place was "added".
Let's fix those.
Reported-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Fixes: 4e0b1ab72b ("KVM: s390: gs support for kvm guests")
Fixes: a03825bbd0 ("KVM: s390: use kvm->created_vcpus")
We must not go beyond the pre-allocated buffer. This can happen when
a new memory slot is added during migration.
Reported-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org # 4.13+
Fixes: 190df4a212 (KVM: s390: CMMA tracking, ESSA emulation, migration mode)
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
When multiple memory slots are present the cmma migration code
does not allocate enough memory for the bitmap. The memory slots
are sorted in reverse order, so we must use gfn and size of
slot[0] instead of the last one.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # 4.13+
Fixes: 190df4a212 (KVM: s390: CMMA tracking, ESSA emulation, migration mode)
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
After the vcpu_load/vcpu_put pushdown, the handling of asynchronous VCPU
ioctl is already much clearer in that it is obvious that they bypass
vcpu_load and vcpu_put.
However, it is still not perfect in that the different state of the VCPU
mutex is still hidden in the caller. Separate those ioctls into a new
function kvm_arch_vcpu_async_ioctl that returns -ENOIOCTLCMD for more
"traditional" synchronous ioctls.
Cc: James Hogan <jhogan@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the calls to vcpu_load() and vcpu_put() in to the architecture
specific implementations of kvm_arch_vcpu_ioctl() which dispatches
further architecture-specific ioctls on to other functions.
Some architectures support asynchronous vcpu ioctls which cannot call
vcpu_load() or take the vcpu->mutex, because that would prevent
concurrent execution with a running VCPU, which is the intended purpose
of these ioctls, for example because they inject interrupts.
We repeat the separate checks for these specifics in the architecture
code for MIPS, S390 and PPC, and avoid taking the vcpu->mutex and
calling vcpu_load for these ioctls.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_set_fpu().
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_get_fpu().
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_set_guest_debug().
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_set_mpstate().
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_get_mpstate().
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_set_sregs().
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_get_sregs().
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_set_regs().
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_get_regs().
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move vcpu_load() and vcpu_put() into the architecture specific
implementations of kvm_arch_vcpu_ioctl_run().
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> # s390 parts
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[Rebased. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- SPDX tags
- Fence storage key accesses from problem state
- Make sure that irq_state.flags is not used in the future
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=uodY
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-master-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux
KVM: s390: Fixes for 4.15
- SPDX tags
- Fence storage key accesses from problem state
- Make sure that irq_state.flags is not used in the future
All skey functions call skey_check_enable at their start, which checks
if we are in the PSTATE and injects a privileged operation exception
if we are.
Unfortunately they continue processing afterwards and perform the
operation anyhow as skey_check_enable does not deliver an error if the
exception injection was successful.
Let's move the PSTATE check into the skey functions and exit them on
such an occasion, also we now do not enable skey handling anymore in
such a case.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: a7e19ab ("KVM: s390: handle missing storage-key facility")
Cc: <stable@vger.kernel.org> # v4.8+
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Old kernels did not check for zero in the irq_state.flags field and old
QEMUs did not zero the flag/reserved fields when calling
KVM_S390_*_IRQ_STATE. Let's add comments to prevent future uses of
these fields.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Now that the SPDX tag is in all arch/s390/kvm/ files, that identifies
the license in a specific and legally-defined manner. So the extra GPL
text wording can be removed as it is no longer needed at all.
This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text. And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
No copyright headers or other non-license-description text was removed.
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20171124140043.10062-9-gregkh@linuxfoundation.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.
Update the arch/s390/kvm/ files with the correct SPDX license
identifier based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.
This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20171124140043.10062-3-gregkh@linuxfoundation.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
KVM API says for the signal mask you set via KVM_SET_SIGNAL_MASK, that
"any unblocked signal received [...] will cause KVM_RUN to return with
-EINTR" and that "the signal will only be delivered if not blocked by
the original signal mask".
This, however, is only true, when the calling task has a signal handler
registered for a signal. If not, signal evaluation is short-circuited for
SIG_IGN and SIG_DFL, and the signal is either ignored without KVM_RUN
returning or the whole process is terminated.
Make KVM_SET_SIGNAL_MASK behave as advertised by utilizing logic similar
to that in do_sigtimedwait() to avoid short-circuiting of signals.
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Common:
- Python 3 support in kvm_stat
- Accounting of slabs to kmemcg
ARM:
- Optimized arch timer handling for KVM/ARM
- Improvements to the VGIC ITS code and introduction of an ITS reset
ioctl
- Unification of the 32-bit fault injection logic
- More exact external abort matching logic
PPC:
- Support for running hashed page table (HPT) MMU mode on a host that
is using the radix MMU mode; single threaded mode on POWER 9 is
added as a pre-requisite
- Resolution of merge conflicts with the last second 4.14 HPT fixes
- Fixes and cleanups
s390:
- Some initial preparation patches for exitless interrupts and crypto
- New capability for AIS migration
- Fixes
x86:
- Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs, and
after-reset state
- Refined dependencies for VMX features
- Fixes for nested SMI injection
- A lot of cleanups
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJaDayXAAoJEED/6hsPKofo/3UH/3HvlcHt+ADTkCU1/iiKAs+i
0zngIOXIxgHDnV0ww6bV+Znww0BzTYgKCAXX76z603jdpDwG/pzQQcbLDF5ZoJnD
sQtF10gZinWaRsHlfbLqjrHGL2pGDHO1UKBKLJ0bAIyORPZBxs7i+VmrY/blnr9c
0wsybJ8RbvwAxjsDL5jeX/z4NehPupmKUc4Lf0eZdSHwVOf9sjn+MP6jJ0r2JcIb
D+zddPBiLStzN97t4gZpQsrlj3LKrDS+6hY+1TjSvlh+yHKFVFh58VhLm4DuDeb5
bYOAlWJ/gAWEzfvr5Ld+Nd7SqWWn/14logPkQ4gcU4BI/neAOzk4c6hJfCHl1nk=
=593n
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"First batch of KVM changes for 4.15
Common:
- Python 3 support in kvm_stat
- Accounting of slabs to kmemcg
ARM:
- Optimized arch timer handling for KVM/ARM
- Improvements to the VGIC ITS code and introduction of an ITS reset
ioctl
- Unification of the 32-bit fault injection logic
- More exact external abort matching logic
PPC:
- Support for running hashed page table (HPT) MMU mode on a host that
is using the radix MMU mode; single threaded mode on POWER 9 is
added as a pre-requisite
- Resolution of merge conflicts with the last second 4.14 HPT fixes
- Fixes and cleanups
s390:
- Some initial preparation patches for exitless interrupts and crypto
- New capability for AIS migration
- Fixes
x86:
- Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs,
and after-reset state
- Refined dependencies for VMX features
- Fixes for nested SMI injection
- A lot of cleanups"
* tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (89 commits)
KVM: s390: provide a capability for AIS state migration
KVM: s390: clear_io_irq() requests are not expected for adapter interrupts
KVM: s390: abstract conversion between isc and enum irq_types
KVM: s390: vsie: use common code functions for pinning
KVM: s390: SIE considerations for AP Queue virtualization
KVM: s390: document memory ordering for kvm_s390_vcpu_wakeup
KVM: PPC: Book3S HV: Cosmetic post-merge cleanups
KVM: arm/arm64: fix the incompatible matching for external abort
KVM: arm/arm64: Unify 32bit fault injection
KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET
KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET
KVM: arm/arm64: vgic-its: Free caches when GITS_BASER Valid bit is cleared
KVM: arm/arm64: vgic-its: New helper functions to free the caches
KVM: arm/arm64: vgic-its: Remove kvm_its_unmap_device
arm/arm64: KVM: Load the timer state when enabling the timer
KVM: arm/arm64: Rework kvm_timer_should_fire
KVM: arm/arm64: Get rid of kvm_timer_flush_hwstate
KVM: arm/arm64: Avoid phys timer emulation in vcpu entry/exit
KVM: arm/arm64: Move phys_timer_emulate function
KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps
...
Pull s390 updates from Heiko Carstens:
"Since Martin is on vacation you get the s390 pull request for the
v4.15 merge window this time from me.
Besides a lot of cleanups and bug fixes these are the most important
changes:
- a new regset for runtime instrumentation registers
- hardware accelerated AES-GCM support for the aes_s390 module
- support for the new CEX6S crypto cards
- support for FORTIFY_SOURCE
- addition of missing z13 and new z14 instructions to the in-kernel
disassembler
- generate opcode tables for the in-kernel disassembler out of a
simple text file instead of having to manually maintain those
tables
- fast memset16, memset32 and memset64 implementations
- removal of named saved segment support
- hardware counter support for z14
- queued spinlocks and queued rwlocks implementations for s390
- use the stack_depth tracking feature for s390 BPF JIT
- a new s390_sthyi system call which emulates the sthyi (store
hypervisor information) instruction
- removal of the old KVM virtio transport
- an s390 specific CPU alternatives implementation which is used in
the new spinlock code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (88 commits)
MAINTAINERS: add virtio-ccw.h to virtio/s390 section
s390/noexec: execute kexec datamover without DAT
s390: fix transactional execution control register handling
s390/bpf: take advantage of stack_depth tracking
s390: simplify transactional execution elf hwcap handling
s390/zcrypt: Rework struct ap_qact_ap_info.
s390/virtio: remove unused header file kvm_virtio.h
s390: avoid undefined behaviour
s390/disassembler: generate opcode tables from text file
s390/disassembler: remove insn_to_mnemonic()
s390/dasd: avoid calling do_gettimeofday()
s390: vfio-ccw: Do not attempt to free no-op, test and tic cda.
s390: remove named saved segment support
s390/archrandom: Reconsider s390 arch random implementation
s390/pci: do not require AIS facility
s390/qdio: sanitize put_indicator
s390/qdio: use atomic_cmpxchg
s390/nmi: avoid using long-displacement facility
s390: pass endianness info to sparse
s390/decompressor: remove informational messages
...
The AIS capability was introduced in 4.12, while the interface to
migrate the state was added in 4.13. Unfortunately it is not possible
for userspace to detect the migration capability without creating a flic
kvm device. As in QEMU the cpu model detection runs on the "none"
machine this will result in cpu model issues regarding the "ais"
capability.
To get the "ais" capability properly let's add a new KVM capability that
tells userspace that AIS states can be migrated.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
There is a chance to delete not yet delivered I/O interrupts if an
exploiter uses the subsystem identification word 0x0000 while
processing a KVM_DEV_FLIC_CLEAR_IO_IRQ ioctl. -EINVAL will be returned
now instead in that case.
Classic interrupts will always have bit 0x10000 set in the schid while
adapter interrupts have a zero schid. The clear_io_irq interface is
only useful for classic interrupts (as adapter interrupts belong to
many devices). Let's make this interface more strict and forbid a schid
of 0.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The abstraction of the conversion between an isc value and an irq_type
by means of functions isc_to_irq_type() and irq_type_to_isc() allows
to clarify the respective operations where used.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
We will not see -ENOMEM (gfn_to_hva() will return KVM_ERR_PTR_BAD_PAGE
for all errors). So we can also get rid of special handling in the
callers of pin_guest_page() and always assume that it is a g2 error.
As also kvm_s390_inject_program_int() should never fail, we can
simplify pin_scb(), too.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170901151143.22714-1-david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
swait_active does not enforce any ordering and it can therefore trigger
some subtle races when the CPU moves the read for the check before a
previous store and that store is then used on another CPU that is
preparing the swait.
On s390 there is a call to swait_active in kvm_s390_vcpu_wakeup. The
good thing is, on s390 all potential races cannot happen because all
callers of kvm_s390_vcpu_wakeup do not store (no race) or use an atomic
operation, which handles memory ordering. Since this is not guaranteed
by the Linux semantics (but by the implementation on s390) let's add
smp_mb_after_atomic to make this obvious and document the ordering.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The nmi.h header has some constant defines for control register bits.
These definitions should really be located in ctl_reg.h. Move and
rename the defines.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
STHYI requires extensive locking in the higher hypervisors and is
very computational/memory expensive. Therefore we cache the retrieved
hypervisor info whose valid period is 1s with mutex to allow concurrent
access. rw semaphore can't benefit here due to cache line bounce.
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
As we need to support sthyi instruction on LPAR too, move the common code
to kernel part and kvm related code to intercept.c for better reuse.
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Update runtime_instr_cb structure to be consistent with the runtime
instrumentation documentation.
Signed-off-by: Alice Frosi <alice@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Common:
- improve heuristic for boosting preempted spinlocks by ignoring VCPUs
in user mode
ARM:
- fix for decoding external abort types from guests
- added support for migrating the active priority of interrupts when
running a GICv2 guest on a GICv3 host
- minor cleanup
PPC:
- expose storage keys to userspace
- merge powerpc/topic/ppc-kvm branch that contains
find_linux_pte_or_hugepte and POWER9 thread management cleanup
- merge kvm-ppc-fixes with a fix that missed 4.13 because of vacations
- fixes
s390:
- merge of topic branch tlb-flushing from the s390 tree to get the
no-dat base features
- merge of kvm/master to avoid conflicts with additional sthyi fixes
- wire up the no-dat enhancements in KVM
- multiple epoch facility (z14 feature)
- Configuration z/Architecture Mode
- more sthyi fixes
- gdb server range checking fix
- small code cleanups
x86:
- emulate Hyper-V TSC frequency MSRs
- add nested INVPCID
- emulate EPTP switching VMFUNC
- support Virtual GIF
- support 5 level page tables
- speedup nested VM exits by packing byte operations
- speedup MMIO by using hardware provided physical address
- a lot of fixes and cleanups, especially nested
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJZspE1AAoJEED/6hsPKofoDcMIALT11n+LKV50QGwQdg2W1GOt
aChbgnj/Kegit3hQlDhVNb8kmdZEOZzSL81Lh0VPEr7zXU8QiWn2snbizDPv8sde
MpHhcZYZZ0YrpoiZKjl8yiwcu88OWGn2qtJ7OpuTS5hvEGAfxMncp0AMZho6fnz/
ySTwJ9GK2MTgBw39OAzCeDOeoYn4NKYMwjJGqBXRhNX8PG/1wmfqv0vPrd6wfg31
KJ58BumavwJjr8YbQ1xELm9rpQrAmaayIsG0R1dEUqCbt5a1+t2gt4h2uY7tWcIv
ACt2bIze7eF3xA+OpRs+eT+yemiH3t9btIVmhCfzUpnQ+V5Z55VMSwASLtTuJRQ=
=R8Ry
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.14-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"First batch of KVM changes for 4.14
Common:
- improve heuristic for boosting preempted spinlocks by ignoring
VCPUs in user mode
ARM:
- fix for decoding external abort types from guests
- added support for migrating the active priority of interrupts when
running a GICv2 guest on a GICv3 host
- minor cleanup
PPC:
- expose storage keys to userspace
- merge kvm-ppc-fixes with a fix that missed 4.13 because of
vacations
- fixes
s390:
- merge of kvm/master to avoid conflicts with additional sthyi fixes
- wire up the no-dat enhancements in KVM
- multiple epoch facility (z14 feature)
- Configuration z/Architecture Mode
- more sthyi fixes
- gdb server range checking fix
- small code cleanups
x86:
- emulate Hyper-V TSC frequency MSRs
- add nested INVPCID
- emulate EPTP switching VMFUNC
- support Virtual GIF
- support 5 level page tables
- speedup nested VM exits by packing byte operations
- speedup MMIO by using hardware provided physical address
- a lot of fixes and cleanups, especially nested"
* tag 'kvm-4.14-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (67 commits)
KVM: arm/arm64: Support uaccess of GICC_APRn
KVM: arm/arm64: Extract GICv3 max APRn index calculation
KVM: arm/arm64: vITS: Drop its_ite->lpi field
KVM: arm/arm64: vgic: constify seq_operations and file_operations
KVM: arm/arm64: Fix guest external abort matching
KVM: PPC: Book3S HV: Fix memory leak in kvm_vm_ioctl_get_htab_fd
KVM: s390: vsie: cleanup mcck reinjection
KVM: s390: use WARN_ON_ONCE only for checking
KVM: s390: guestdbg: fix range check
KVM: PPC: Book3S HV: Report storage key support to userspace
KVM: PPC: Book3S HV: Fix case where HDEC is treated as 32-bit on POWER9
KVM: PPC: Book3S HV: Fix invalid use of register expression
KVM: PPC: Book3S HV: Fix H_REGISTER_VPA VPA size validation
KVM: PPC: Book3S HV: Fix setting of storage key in H_ENTER
KVM: PPC: e500mc: Fix a NULL dereference
KVM: PPC: e500: Fix some NULL dereferences on error
KVM: PPC: Book3S HV: Protect updates to spapr_tce_tables list
KVM: s390: we are always in czam mode
KVM: s390: expose no-DAT to guest and migration support
KVM: s390: sthyi: remove invalid guest write access
...
- merge of topic branch tlb-flushing from the s390 tree to get the
no-dat base features
- merge of kvm/master to avoid conflicts with additional sthyi fixes
- wire up the no-dat enhancements in KVM
- multiple epoch facility (z14 feature)
- Configuration z/Architecture Mode
- more sthyi fixes
- gdb server range checking fix
- small code cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=N/6G
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux
KVM: s390: Fixes and features for 4.14
- merge of topic branch tlb-flushing from the s390 tree to get the
no-dat base features
- merge of kvm/master to avoid conflicts with additional sthyi fixes
- wire up the no-dat enhancements in KVM
- multiple epoch facility (z14 feature)
- Configuration z/Architecture Mode
- more sthyi fixes
- gdb server range checking fix
- small code cleanups
Pull s390 updates from Martin Schwidefsky:
"The first part of the s390 updates for 4.14:
- Add machine type 0x3906 for IBM z14
- Add IBM z14 TLB flushing improvements for KVM guests
- Exploit the TOD clock epoch extension to provide a continuous TOD
clock afer 2042/09/17
- Add NIAI spinlock hints for IBM z14
- Rework the vmcp driver and use CMA for the respone buffer of z/VM
CP commands
- Drop some s390 specific asm headers and use the generic version
- Add block discard for DASD-FBA devices under z/VM
- Add average request times to DASD statistics
- A few of those constify patches which seem to be in vogue right now
- Cleanup and bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (50 commits)
s390/mm: avoid empty zero pages for KVM guests to avoid postcopy hangs
s390/dasd: Add discard support for FBA devices
s390/zcrypt: make CPRBX const
s390/uaccess: avoid mvcos jump label
s390/mm: use generic mm_hooks
s390/facilities: fix typo
s390/vmcp: simplify vmcp_response_free()
s390/topology: Remove the unused parent_node() macro
s390/dasd: Change unsigned long long to unsigned long
s390/smp: convert cpuhp_setup_state() return code to zero on success
s390: fix 'novx' early parameter handling
s390/dasd: add average request times to dasd statistics
s390/scm: use common completion path
s390/pci: log changes to uid checking
s390/vmcp: simplify vmcp_ioctl()
s390/vmcp: return -ENOTTY for unknown ioctl commands
s390/vmcp: split vmcp header file and move to uapi
s390/vmcp: make use of contiguous memory allocator
s390/cpcmd,vmcp: avoid GFP_DMA allocations
s390/vmcp: fix uaccess check and avoid undefined behavior
...
The machine check information is part of the vsie_page.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170830160603.5452-4-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Move the real logic that always has to be executed out of the
WARN_ON_ONCE.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170830160603.5452-3-david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Looks like the "overflowing" range check is wrong.
|=======b-------a=======|
addr >= a || addr <= b
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170830160603.5452-2-david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Independent of the underlying hardware, kvm will now always handle
SIGP SET ARCHITECTURE as if czam were enabled. Therefore, let's not
only forward that bit but always set it.
While at it, add a comment regarding STHYI.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170829143108.14703-1-david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The STFLE bit 147 indicates whether the ESSA no-DAT operation code is
valid, the bit is not normally provided to the host; the host is
instead provided with an SCLP bit that indicates whether guests can
support the feature.
This patch:
* enables the STFLE bit in the guest if the corresponding SCLP bit is
present in the host.
* adds support for migrating the no-DAT bit in the PGSTEs
* fixes the software interpretation of the ESSA instruction that is
used when migrating, both for the new operation code and for the old
"set stable", as per specifications.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
handle_sthyi() always writes to guest memory if the sthyi function
code is zero in order to fault in the page that later is written to.
However a function code of zero does not necessarily mean that a write
to guest memory happens: if the KVM host is running as a second level
guest under z/VM 6.2 the sthyi instruction is indicated to be
available to the KVM host, however if the instruction is executed it
will always return with a return code that indicates "unsupported
function code".
In such a case handle_sthyi() must not write to guest memory. This
means that the prior write access to fault in the guest page may
result in invalid guest exceptions, and/or invalid data modification.
In order to be architecture compliant simply remove the write_guest()
call.
Given that the guest assumed a write access anyway, this fix does not
qualify for -stable. This just makes sure the sthyi handler is
architecture compliant.
Fixes: 95ca2cb579 ("KVM: s390: Add sthyi emulation")
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Allow for the enablement of MEF and the support for the extended
epoch in SIE and VSIE for the extended guest TOD-Clock.
A new interface is used for getting/setting a guest's extended TOD-Clock
that uses a single ioctl invocation, KVM_S390_VM_TOD_EXT. Since the
host time is a moving target that might see an epoch switch or STP sync
checks we need an atomic ioctl and cannot use the exisiting two
interfaces. The old method of getting and setting the guest TOD-Clock is
still retained and is used when the old ioctls are called.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
kvm has always supported the concept of starting in z/Arch mode so let's
reflect the feature bit to the guest.
Also, we change sigp set architecture to reject any request to change
architecture modes.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
sthyi should only generate a specification exception if the function
code is zero and the response buffer is not on a 4k boundary.
The current code would also test for unknown function codes if the
response buffer, that is currently only defined for function code 0,
is not on a 4k boundary and incorrectly inject a specification
exception instead of returning with condition code 3 and return code 4
(unsupported function code).
Fix this by moving the boundary check.
Fixes: 95ca2cb579 ("KVM: s390: Add sthyi emulation")
Cc: <stable@vger.kernel.org> # 4.8+
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The sthyi inline assembly misses register r3 within the clobber
list. The sthyi instruction will always write a return code to
register "R2+1", which in this case would be r3. Due to that we may
have register corruption and see host crashes or data corruption
depending on how gcc decided to allocate and use registers during
compile time.
Fixes: 95ca2cb579 ("KVM: s390: Add sthyi emulation")
Cc: <stable@vger.kernel.org> # 4.8+
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This implements kvm_arch_vcpu_in_kernel() for s390. DIAG is a privileged
operation, so it cannot be called from problem state (user mode).
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If a vcpu exits due to request a user mode spinlock, then
the spinlock-holder may be preempted in user mode or kernel mode.
(Note that not all architectures trap spin loops in user mode,
only AMD x86 and ARM/ARM64 currently do).
But if a vcpu exits in kernel mode, then the holder must be
preempted in kernel mode, so we should choose a vcpu in kernel mode
as a more likely candidate for the lock holder.
This introduces kvm_arch_vcpu_in_kernel() to decide whether the
vcpu is in kernel-mode when it's preempted. kvm_vcpu_on_spin's
new argument says the same of the spinning VCPU.
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Better machine check handling for HV KVM
- Ability to support guests with threads=2, 4 or 8 on POWER9
- Fix for a race that could cause delayed recognition of signals
- Fix for a bug where POWER9 guests could sleep with interrupts pending.
ARM:
- VCPU request overhaul
- allow timer and PMU to have their interrupt number selected from userspace
- workaround for Cavium erratum 30115
- handling of memory poisonning
- the usual crop of fixes and cleanups
s390:
- initial machine check forwarding
- migration support for the CMMA page hinting information
- cleanups and fixes
x86:
- nested VMX bugfixes and improvements
- more reliable NMI window detection on AMD
- APIC timer optimizations
Generic:
- VCPU request overhaul + documentation of common code patterns
- kvm_stat improvements
There is a small conflict in arch/s390 due to an arch-wide field rename.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJZW4XTAAoJEL/70l94x66DkhMH/izpk54KI17PtyQ9VYI2sYeZ
BWK6Kl886g3ij4pFi3pECqjDJzWaa3ai+vFfzzpJJ8OkCJT5Rv4LxC5ERltVVmR8
A3T1I/MRktSC0VJLv34daPC2z4Lco/6SPipUpPnL4bE2HATKed4vzoOjQ3tOeGTy
dwi7TFjKwoVDiM7kPPDRnTHqCe5G5n13sZ49dBe9WeJ7ttJauWqoxhlYosCGNPEj
g8ZX8+cvcAhVnz5uFL8roqZ8ygNEQq2mgkU18W8ZZKuiuwR0gdsG0gSBFNTdwIMK
NoreRKMrw0+oLXTIB8SZsoieU6Qi7w3xMAMabe8AJsvYtoersugbOmdxGCr1lsA=
=OD7H
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"PPC:
- Better machine check handling for HV KVM
- Ability to support guests with threads=2, 4 or 8 on POWER9
- Fix for a race that could cause delayed recognition of signals
- Fix for a bug where POWER9 guests could sleep with interrupts pending.
ARM:
- VCPU request overhaul
- allow timer and PMU to have their interrupt number selected from userspace
- workaround for Cavium erratum 30115
- handling of memory poisonning
- the usual crop of fixes and cleanups
s390:
- initial machine check forwarding
- migration support for the CMMA page hinting information
- cleanups and fixes
x86:
- nested VMX bugfixes and improvements
- more reliable NMI window detection on AMD
- APIC timer optimizations
Generic:
- VCPU request overhaul + documentation of common code patterns
- kvm_stat improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (124 commits)
Update my email address
kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS
x86: kvm: mmu: use ept a/d in vmcs02 iff used in vmcs12
kvm: x86: mmu: allow A/D bits to be disabled in an mmu
x86: kvm: mmu: make spte mmio mask more explicit
x86: kvm: mmu: dead code thanks to access tracking
KVM: PPC: Book3S: Fix typo in XICS-on-XIVE state saving code
KVM: PPC: Book3S HV: Close race with testing for signals on guest entry
KVM: PPC: Book3S HV: Simplify dynamic micro-threading code
KVM: x86: remove ignored type attribute
KVM: LAPIC: Fix lapic timer injection delay
KVM: lapic: reorganize restart_apic_timer
KVM: lapic: reorganize start_hv_timer
kvm: nVMX: Check memory operand to INVVPID
KVM: s390: Inject machine check into the nested guest
KVM: s390: Inject machine check into the guest
tools/kvm_stat: add new interactive command 'b'
tools/kvm_stat: add new command line switch '-i'
tools/kvm_stat: fix error on interactive command 'g'
KVM: SVM: suppress unnecessary NMI singlestep on GIF=0 and nested exit
...
Pull s390 updates from Martin Schwidefsky:
"The bulk of the s390 patches for 4.13. Some new things but mostly bug
fixes and cleanups. Noteworthy changes:
- The SCM block driver is converted to blk-mq
- Switch s390 to 5 level page tables. The virtual address space for a
user space process can now have up to 16EB-4KB.
- Introduce a ELF phdr flag for qemu to avoid the global
vm.alloc_pgste which forces all processes to large page tables
- A couple of PCI improvements to improve error recovery
- Included is the merge of the base support for proper machine checks
for KVM"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (52 commits)
s390/dasd: Fix faulty ENODEV for RO sysfs attribute
s390/pci: recognize name clashes with uids
s390/pci: provide more debug information
s390/pci: fix handling of PEC 306
s390/pci: improve pci hotplug
s390/pci: introduce clp_get_state
s390/pci: improve error handling during fmb (de)registration
s390/pci: improve unreg_ioat error handling
s390/pci: improve error handling during interrupt deregistration
s390/pci: don't cleanup in arch_setup_msi_irqs
KVM: s390: Backup the guest's machine check info
s390/nmi: s390: New low level handling for machine check happening in guest
s390/fpu: export save_fpu_regs for all configs
s390/kvm: avoid global config of vm.alloc_pgste=1
s390: rename struct psw_bits members
s390: rename psw_bits enums
s390/mm: use correct address space when enabling DAT
s390/cio: introduce io_subchannel_type
s390/ipl: revert Load Normal semantics for LPAR CCW-type re-IPL
s390/dumpstack: remove raw stack dump
...
- vcpu request overhaul
- allow timer and PMU to have their interrupt number
selected from userspace
- workaround for Cavium erratum 30115
- handling of memory poisonning
- the usual crop of fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=6hNK
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/ARM updates for 4.13
- vcpu request overhaul
- allow timer and PMU to have their interrupt number
selected from userspace
- workaround for Cavium erratum 30115
- handling of memory poisonning
- the usual crop of fixes and cleanups
Conflicts:
arch/s390/include/asm/kvm_host.h
This provides the basic plumbing for handling machine checks when
running guests
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=CTzL
-----END PGP SIGNATURE-----
Merge tag 'nmiforkvm' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into features
Pull kvm patches from Christian Borntraeger:
"s390,kvm: provide plumbing for machines checks when running guests"
This provides the basic plumbing for handling machine checks when
running guests
With vsie feature enabled, kvm can support nested guests (guest-3).
So inject machine check to the guest-2 if it happens when the nested
guest is running. And guest-2 will detect the machine check belongs
to guest-3 and reinject it into guest-3.
The host (guest-1) tries to inject the machine check to the picked
destination vcpu if it's a floating machine check.
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
If the exit flag of SIE indicates that a machine check has happened
during guest's running and needs to be injected, inject it to the guest
accordingly.
But some machine checks, e.g. Channel Report Pending (CRW), refer to
host conditions only (the guest's channel devices are not managed by
the kernel directly) and are therefore not injected into the guest.
External Damage (ED) is also not reinjected into the guest because ETR
conditions are gone in Linux and STP conditions are not enabled in the
guest, and ED contains only these 8 ETR and STP conditions.
In general, instruction-processing damage, system recovery,
storage error, service-processor damage and channel subsystem damage
will be reinjected into the guest, and the remain (System damage,
timing-facility damage, warning, ED and CRW) will be handled on the host.
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This provides the basic plumbing for handling machine checks when
running guests
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=CTzL
-----END PGP SIGNATURE-----
Merge tag 'nmiforkvm' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kernelorgnext
s390,kvm: provide plumbing for machines checks when running guests
This provides the basic plumbing for handling machine checks when
running guests
When a machine check happens in the guest, related mcck info (mcic,
external damage code, ...) is stored in the vcpu's lowcore on the host.
Then the machine check handler's low-level part is executed, followed
by the high-level part.
If the high-level part's execution is interrupted by a new machine check
happening on the same vcpu on the host, the mcck info in the lowcore is
overwritten with the new machine check's data.
If the high-level part's execution is scheduled to a different cpu,
the mcck info in the lowcore is uncertain.
Therefore, for both cases, the further reinjection to the guest will use
the wrong data.
Let's backup the mcck info in the lowcore to the sie page
for further reinjection, so that the right data will be used.
Add new member into struct sie_page to store related machine check's
info of mcic, failing storage address and external damage code.
Signed-off-by: QingFeng Hao <haoqf@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
For real-space designation asces the asce origin part is only a token.
The asce token origin must not be used to generate an effective
address for storage references. This however is erroneously done
within kvm_s390_shadow_tables().
Furthermore within the same function the wrong parts of virtual
addresses are used to generate a corresponding real address
(e.g. the region second index is used as region first index).
Both of the above can result in incorrect address translations. Only
for real space designations with a token origin of zero and addresses
below one megabyte the translation was correct.
Furthermore replace a "!asce.r" statement with a "!*fake" statement to
make it more obvious that a specific condition has nothing to do with
the architecture, but with the fake handling of real space designations.
Fixes: 3218f7094b ("s390/mm: support real-space for gmap shadows")
Cc: David Hildenbrand <david@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
For naturally aligned and sized data structures avoid superfluous
packed and aligned attributes.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
In some cases, userspace needs to get or set all ais states for example
migration. So we introduce a new group KVM_DEV_FLIC_AISM_ALL to provide
interfaces to get or set the adapter-interruption-suppression mode for
all ISCs. The corresponding documentation is updated.
Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
ifetch
While currently only used to fetch the original instruction on failure
for getting the instruction length code, we should make the page table
walking code future proof.
Suggested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
* Add the struct used in the ioctls to get and set CMMA attributes.
* Add the two functions needed to get and set the CMMA attributes for
guest pages.
* Add the two ioctls that use the aforementioned functions.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
* Add a migration state bitmap to keep track of which pages have dirty
CMMA information.
* Disable CMMA by default, so we can track if it's used or not. Enable
it on first use like we do for storage keys (unless we are doing a
migration).
* Creates a VM attribute to enter and leave migration mode.
* In migration mode, CMMA is disabled in the SIE block, so ESSA is
always interpreted and emulated in software.
* Free the migration state on VM destroy.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Rename a couple of the struct psw_bits members so it is more obvious
for what they are good. Initially I thought using the single character
names from the PoP would be sufficient and obvious, but admittedly
that is not true.
The current implementation is not easy to use, if one has to look into
the source file to figure out which member represents the 'per' bit
(which is the 'r' member).
Therefore rename the members to sane names that are identical to the
uapi psw mask defines:
r -> per
i -> io
e -> ext
t -> dat
m -> mcheck
w -> wait
p -> pstate
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The address space enums that must be used when modifying the address
space part of a psw with the psw_bits() macro can easily be confused
with the psw defines that are used to mask and compare directly the
mask part of a psw.
We have e.g. PSW_AS_PRIMARY vs PSW_ASC_PRIMARY.
To avoid confusion rename the PSW_AS_* enums to PSW_BITS_AS_*.
In addition also rename the PSW_AMODE_* enums, so they also follow the
same naming scheme: PSW_BITS_AMODE_*.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
A first step in vcpu->requests encapsulation. Additionally, we now
use READ_ONCE() when accessing vcpu->requests, which ensures we
always load vcpu->requests when it's accessed. This is important as
other threads can change it any time. Also, READ_ONCE() documents
that vcpu->requests is used with other threads, likely requiring
memory barriers, which it does.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
[ Documented the new use of READ_ONCE() and converted another check
in arch/mips/kvm/vz.c ]
Signed-off-by: Andrew Jones <drjones@redhat.com>
Acked-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
If ais is disabled via cpumodel, we must act accordingly, even if
KVM_CAP_S390_AIS was enabled.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Merge more updates from Andrew Morton:
- the rest of MM
- various misc things
- procfs updates
- lib/ updates
- checkpatch updates
- kdump/kexec updates
- add kvmalloc helpers, use them
- time helper updates for Y2038 issues. We're almost ready to remove
current_fs_time() but that awaits a btrfs merge.
- add tracepoints to DAX
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits)
drivers/staging/ccree/ssi_hash.c: fix build with gcc-4.4.4
selftests/vm: add a test for virtual address range mapping
dax: add tracepoint to dax_insert_mapping()
dax: add tracepoint to dax_writeback_one()
dax: add tracepoints to dax_writeback_mapping_range()
dax: add tracepoints to dax_load_hole()
dax: add tracepoints to dax_pfn_mkwrite()
dax: add tracepoints to dax_iomap_pte_fault()
mtd: nand: nandsim: convert to memalloc_noreclaim_*()
treewide: convert PF_MEMALLOC manipulations to new helpers
mm: introduce memalloc_noreclaim_{save,restore}
mm: prevent potential recursive reclaim due to clearing PF_MEMALLOC
mm/huge_memory.c: deposit a pgtable for DAX PMD faults when required
mm/huge_memory.c: use zap_deposited_table() more
time: delete CURRENT_TIME_SEC and CURRENT_TIME
gfs2: replace CURRENT_TIME with current_time
apparmorfs: replace CURRENT_TIME with current_time()
lustre: replace CURRENT_TIME macro
fs: ubifs: replace CURRENT_TIME_SEC with current_time
fs: ufs: use ktime_get_real_ts64() for birthtime
...
There are many code paths opencoding kvmalloc. Let's use the helper
instead. The main difference to kvmalloc is that those users are
usually not considering all the aspects of the memory allocator. E.g.
allocation requests <= 32kB (with 4kB pages) are basically never failing
and invoke OOM killer to satisfy the allocation. This sounds too
disruptive for something that has a reasonable fallback - the vmalloc.
On the other hand those requests might fallback to vmalloc even when the
memory allocator would succeed after several more reclaim/compaction
attempts previously. There is no guarantee something like that happens
though.
This patch converts many of those places to kv[mz]alloc* helpers because
they are more conservative.
Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390
Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim
Acked-by: David Sterba <dsterba@suse.com> # btrfs
Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph
Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4
Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Santosh Raspatur <santosh@chelsio.com>
Cc: Hariprasad S <hariprasad@chelsio.com>
Cc: Yishai Hadas <yishaih@mellanox.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: "Yan, Zheng" <zyan@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
support; virtual interrupt controller performance improvements; support
for userspace virtual interrupt controller (slower, but necessary for
KVM on the weird Broadcom SoCs used by the Raspberry Pi 3)
* MIPS: basic support for hardware virtualization (ImgTec
P5600/P6600/I6400 and Cavium Octeon III)
* PPC: in-kernel acceleration for VFIO
* s390: support for guests without storage keys; adapter interruption
suppression
* x86: usual range of nVMX improvements, notably nested EPT support for
accessed and dirty bits; emulation of CPL3 CPUID faulting
* generic: first part of VCPU thread request API; kvm_stat improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJZEHUkAAoJEL/70l94x66DBeYH/09wrpJ2FjU4Rqv7FxmqgWfH
9WGi4wvn/Z+XzQSyfMJiu2SfZVzU69/Y67OMHudy7vBT6knB+ziM7Ntoiu/hUfbG
0g5KsDX79FW15HuvuuGh9kSjUsj7qsQdyPZwP4FW/6ZoDArV9mibSvdjSmiUSMV/
2wxaoLzjoShdOuCe9EABaPhKK0XCrOYkygT6Paz1pItDxaSn8iW3ulaCuWMprUfG
Niq+dFemK464E4yn6HVD88xg5j2eUM6bfuXB3qR3eTR76mHLgtwejBzZdDjLG9fk
32PNYKhJNomBxHVqtksJ9/7cSR6iNPs7neQ1XHemKWTuYqwYQMlPj1NDy0aslQU=
=IsiZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- HYP mode stub supports kexec/kdump on 32-bit
- improved PMU support
- virtual interrupt controller performance improvements
- support for userspace virtual interrupt controller (slower, but
necessary for KVM on the weird Broadcom SoCs used by the Raspberry
Pi 3)
MIPS:
- basic support for hardware virtualization (ImgTec P5600/P6600/I6400
and Cavium Octeon III)
PPC:
- in-kernel acceleration for VFIO
s390:
- support for guests without storage keys
- adapter interruption suppression
x86:
- usual range of nVMX improvements, notably nested EPT support for
accessed and dirty bits
- emulation of CPL3 CPUID faulting
generic:
- first part of VCPU thread request API
- kvm_stat improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits)
kvm: nVMX: Don't validate disabled secondary controls
KVM: put back #ifndef CONFIG_S390 around kvm_vcpu_kick
Revert "KVM: Support vCPU-based gfn->hva cache"
tools/kvm: fix top level makefile
KVM: x86: don't hold kvm->lock in KVM_SET_GSI_ROUTING
KVM: Documentation: remove VM mmap documentation
kvm: nVMX: Remove superfluous VMX instruction fault checks
KVM: x86: fix emulation of RSM and IRET instructions
KVM: mark requests that need synchronization
KVM: return if kvm_vcpu_wake_up() did wake up the VCPU
KVM: add explicit barrier to kvm_vcpu_kick
KVM: perform a wake_up in kvm_make_all_cpus_request
KVM: mark requests that do not need a wakeup
KVM: remove #ifndef CONFIG_S390 around kvm_vcpu_wake_up
KVM: x86: always use kvm_make_request instead of set_bit
KVM: add kvm_{test,clear}_request to replace {test,clear}_bit
s390: kvm: Cpu model support for msa6, msa7 and msa8
KVM: x86: remove irq disablement around KVM_SET_CLOCK/KVM_GET_CLOCK
kvm: better MWAIT emulation for guests
KVM: x86: virtualize cpuid faulting
...
Pull s390 updates from Martin Schwidefsky:
- three merges for KVM/s390 with changes for vfio-ccw and cpacf. The
patches are included in the KVM tree as well, let git sort it out.
- add the new 'trng' random number generator
- provide the secure key verification API for the pkey interface
- introduce the z13 cpu counters to perf
- add a new system call to set up the guarded storage facility
- simplify TASK_SIZE and arch_get_unmapped_area
- export the raw STSI data related to CPU topology to user space
- ... and the usual churn of bug-fixes and cleanups.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (74 commits)
s390/crypt: use the correct module alias for paes_s390.
s390/cpacf: Introduce kma instruction
s390/cpacf: query instructions use unique parameters for compatibility with KMA
s390/trng: Introduce s390 TRNG device driver.
s390/crypto: Provide s390 specific arch random functionality.
s390/crypto: Add new subfunctions to the cpacf PRNO function.
s390/crypto: Renaming PPNO to PRNO.
s390/pageattr: avoid unnecessary page table splitting
s390/mm: simplify arch_get_unmapped_area[_topdown]
s390/mm: make TASK_SIZE independent from the number of page table levels
s390/gs: add regset for the guarded storage broadcast control block
s390/kvm: Add use_cmma field to mm_context_t
s390/kvm: Add PGSTE manipulation functions
vfio: ccw: improve error handling for vfio_ccw_mdev_remove
vfio: ccw: remove unnecessary NULL checks of a pointer
s390/spinlock: remove compare and delay instruction
s390/spinlock: use atomic primitives for spinlocks
s390/cpumf: simplify detection of guest samples
s390/pci: remove forward declaration
s390/pci: increase the PCI_NR_FUNCTIONS default
...
Users were expected to use kvm_check_request() for testing and clearing,
but request have expanded their use since then and some users want to
only test or do a faster clear.
Make sure that requests are not directly accessed with bit operations.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
msa6 and msa7 require no changes.
msa8 adds kma instruction and feature area.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The PPNO (Perform Pseudorandom Number Operation) instruction
has been renamed to PRNO (Perform Random Number Operation).
To avoid confusion and conflicts with future extensions with
this instruction (like e.g. provide a true random number
generator) this patch renames all occurences in cpacf.h and
adjusts the only exploiter code which is the prng device
driver and one line in the s390 kvm feature check.
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The TASK_SIZE for a process should be maximum possible size of the address
space, 2GB for a 31-bit process and 8PB for a 64-bit process. The number
of page table levels required for a given memory layout is a consequence
of the mapped memory areas and their location.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
If the KSS facility is available on the machine, we also make it
available for our KVM guests.
The KSS facility bypasses storage key management as long as the guest
does not issue a related instruction. When that happens, the control is
returned to the host, which has to turn off KSS for a guest vcpu
before retrying the instruction.
Signed-off-by: Corey S. McQuay <csmcquay@linux.vnet.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
