- Fastset updates to make sure DRRS and PSR are properly enabled (Hans)
- Header include clean-up (Brajeswar, Jani)
- Improvements and clean-up on debugfs (Chris, Jani)
- Avoid division by zero on CNL clocks setup (Xiao)
- Restrict PSMI context load w/a to Haswell GT1 (Chris)
- Remove HW semaphores for gen7 inter-engine sync (Chris)
- Pull the render flush into breadcrumb emission (Chris)
- i915_params copy and free helpers and other reorgs and docs (Jani)
- Remove has_pooled_eu static initializer (Tvrtko)
- Updates on kerneldoc (Chris)
- Remove redundant trailing request flush (Chris)
- ringbuffer irq seqno fixes and clean-up (Chris)
- splitting off runtime device info and other clean-up around (Jani)
- Selftests improvements (Chris, Daniele)
- Flush RING_IMR changes before changing the global GT IMR on gen6 and HSW (Chris)
- Some improvements and fixes around GPU reset and GPU hang report (Chris)
- Remove partial attempt to swizzle on pread/pwrite (Chris)
- Return immediately if trylock fails for direct-reclaim (Chris)
- Downgrade scare message for unknown HuC firmware (Jani)
- ACPI / PMIC for MIPI / DSI (Hans)
- Reduce i915_request_alloc retirement to local context (Chris)
- Init per-engine WAs for all engines (Daniele)
- drop DPF code for gen8+ (Daniele)
- Guard error capture against unpinned vma (Chris)
- Use mutex_lock_killable from inside the shrinker (Chris)
- Removing pooling from struct_mutex from vmap shrinker (Chris)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcN9waAAoJEPpiX2QO6xPKW3oH/AkR8oFAcCF8VCYtPHnRUV6F
AsKYG57NMfWH3tfJRg+W5gVtPV+gxOv5IIf6DHjoT2nR0N/r57sGlpKaR4uhq14r
NUK6+cEoNDSDr3zdGt5QI3p8YokEo5MFIVYNPD9THO0hz4uvlzowru1bSC5bJvjn
RvMsb4SUYFMA3BmHNsSczPPVuJLccndl5JFv8oUOrtA5ksct/8G3CI6V2KSOwT7W
ebjrQ56vFMLuDMYwgfrss5sFMoRT60Da0C6dCroHKOzB9L/w7oPOVfwNE9miDRCx
7IRIfICiPTCB2GsJ635sXet2sMV7RFxSjKkDND5iwV2vp96yqAwEjhXJq3t8MCE=
=MqY8
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-01-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Unwind failure on pinning the gen7 PPGTT (Chris)
- Fastset updates to make sure DRRS and PSR are properly enabled (Hans)
- Header include clean-up (Brajeswar, Jani)
- Improvements and clean-up on debugfs (Chris, Jani)
- Avoid division by zero on CNL clocks setup (Xiao)
- Restrict PSMI context load w/a to Haswell GT1 (Chris)
- Remove HW semaphores for gen7 inter-engine sync (Chris)
- Pull the render flush into breadcrumb emission (Chris)
- i915_params copy and free helpers and other reorgs and docs (Jani)
- Remove has_pooled_eu static initializer (Tvrtko)
- Updates on kerneldoc (Chris)
- Remove redundant trailing request flush (Chris)
- ringbuffer irq seqno fixes and clean-up (Chris)
- splitting off runtime device info and other clean-up around (Jani)
- Selftests improvements (Chris, Daniele)
- Flush RING_IMR changes before changing the global GT IMR on gen6 and HSW (Chris)
- Some improvements and fixes around GPU reset and GPU hang report (Chris)
- Remove partial attempt to swizzle on pread/pwrite (Chris)
- Return immediately if trylock fails for direct-reclaim (Chris)
- Downgrade scare message for unknown HuC firmware (Jani)
- ACPI / PMIC for MIPI / DSI (Hans)
- Reduce i915_request_alloc retirement to local context (Chris)
- Init per-engine WAs for all engines (Daniele)
- drop DPF code for gen8+ (Daniele)
- Guard error capture against unpinned vma (Chris)
- Use mutex_lock_killable from inside the shrinker (Chris)
- Removing pooling from struct_mutex from vmap shrinker (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 11 Jan 2019 09:58:18 AEST
# gpg: using RSA key FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA
# Conflicts:
# drivers/gpu/drm/i915/intel_dp.c
# drivers/gpu/drm/i915/intel_drv.h
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114183820.GA2855@intel.com
UAPI Changes:
- New fourcc identifier for ARM Framebuffer Compression v1.3
Cross-subsystem Changes:
Core Changes:
- Reorganisation of drm_device and drm_framebuffer headers
- Cleanup of the drmP inclusion
- Fix leaks in the fb-helpers
- Allow for depth different from bpp in fb-helper fbdev emulation
- Remove drm_mode_object from drm_display_mode
Driver Changes:
- Add reflection properties to rockchip
- a bunch of fixes for virtio
- a bunch of fixes for dp_mst and drivers using it, and introduction of a
new refcounting scheme
- Convertion of bochs to atomic and generic fbdev emulation
- Allow meson to remove the firmware framebuffers
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXD+OHgAKCRDj7w1vZxhR
xe3IAP4s59sFVMZseVJpwSe41OJ1ipD/cyIbtXU94X6nFd6zCAD+Jm4q+XIIS+uv
7ElmJ2BD7rwicqSViWNG8tteHYfjrAU=
=XPsb
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2019-01-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.1:
UAPI Changes:
- New fourcc identifier for ARM Framebuffer Compression v1.3
Cross-subsystem Changes:
Core Changes:
- Reorganisation of drm_device and drm_framebuffer headers
- Cleanup of the drmP inclusion
- Fix leaks in the fb-helpers
- Allow for depth different from bpp in fb-helper fbdev emulation
- Remove drm_mode_object from drm_display_mode
Driver Changes:
- Add reflection properties to rockchip
- a bunch of fixes for virtio
- a bunch of fixes for dp_mst and drivers using it, and introduction of a
new refcounting scheme
- Convertion of bochs to atomic and generic fbdev emulation
- Allow meson to remove the firmware framebuffers
[airlied: patch rcar-du to add drm_modes.h]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190116200428.u2n4jbk4mzza7n6e@flea
Something that I completely missed when implementing the new MST VCPI
atomic helpers is that with those helpers, there's technically a chance
of us having to grab additional modeset locks in ->compute_config() and
furthermore, that means we have the potential to hit a normal modeset
deadlock. However, because ->compute_config() only returns a bool this
means we can't return -EDEADLK when we need to drop locks and try again
which means we end up just failing the atomic check permanently. Whoops.
So, fix this by modifying ->compute_config() to pass down an actual
error code instead of a bool so that the atomic check can be restarted
on modeset deadlocks.
Thanks to Ville Syrjälä for pointing this out!
Changes since v1:
* Add some newlines
* Return only -EINVAL from hsw_crt_compute_config()
* Propogate return code from intel_dp_compute_dsc_params()
* Change all of the intel_dp_compute_link_config*() variants
* Don't miss if (hdmi_port_clock_valid()) branch in
intel_hdmi_compute_config()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: eceae14724 ("drm/dp_mst: Start tracking per-port VCPI allocations")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109320
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190115200800.3121-1-lyude@redhat.com
There is a plan to build the kernel with -Wimplicit-fallthrough and
these places in the code produced warnings (W=1). Fix them up.
This commit remove the following warnings:
include/linux/compiler.h:77:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/asm-generic/bug.h:134:2: note: in expansion of macro 'unlikely'
drivers/gpu/drm/drm_dp_helper.c:155:3: note: in expansion of macro 'WARN'
include/linux/compiler.h:77:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
include/asm-generic/bug.h:134:2: note: in expansion of macro 'unlikely'
drivers/gpu/drm/drm_dp_helper.c:173:3: note: in expansion of macro 'WARN'
drivers/gpu/drm/drm_dp_helper.c:547:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114202748.15584-1-malat@debian.org
On i965gm we need to adjust max_vblank_count dynamically
depending on whether the TV encoder is used or not. To
that end add a per-crtc max_vblank_count that takes
precedence over its device wide counterpart. The driver
can now call drm_crtc_set_max_vblank_count() to configure
the per-crtc value before calling drm_vblank_on().
Also looks like there was some discussion about exynos needing
similar treatment.
v2: Drop the extra max_vblank_count!=0 check for the
WARN(last!=current), will take care of it in i915 code (Daniel)
WARN_ON(!inmodeset) (Daniel)
WARN_ON(dev->max_vblank_count)
Pimp up the docs (Daniel)
Cc: stable@vger.kernel.org
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181127182004.28885-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In case we are using simplefb or another conflicting framebuffer, make
the call to drm_fb_helper_remove_conflicting_framebuffers()
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181210092853.13050-1-mjourdan@baylibre.com
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128212713.43500-3-noralf@tronnes.org
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
struct kirin_drm_private can be removed now that driver doesn't have to
store the fbdev pointer.
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128212713.43500-2-noralf@tronnes.org
In the quest to get rid of drmP.h move the newly
added EXPORT_SYMBOL_FOR_TESTS_ONLY to drm_util.h.
Fix the single user.
Add a note to drmP.h to avoid further use of it.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190112193251.20450-3-sam@ravnborg.org
Move drm_can_sleep() out of drmP.h to allow users
to get rid of the drmP.h include.
There was no header file that was a good match for this helper function.
So add this to drm_util with the relevant includes.
Add include of drm_util.h to all users.
v2:
- Update comments to use kernel-doc style (Daniel)
- Add FIXME to drm_can_sleep and add note that this
function should not be used in new code (Daniel)
v3:
- Fix kernel-doc syntax (Daniel)
- Plug drm_util.h into drm-internels.rst (Daniel)
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190112193251.20450-2-sam@ravnborg.org
This fixes an '*ERROR* connector VGA-2 leaked!' splat at driver unload.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190111140242.29002-1-robdclark@gmail.com
[ kraxel: adapt to commit "c2d88e06bc drm: Move the legacy kms
disable_all helper to crtc helpers" ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
bochs_fbdev.c is almost empty now. Move the remaining framebuffer bits
over to bochs_kms.c. Pure code motion. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190111053752.4004-17-kraxel@redhat.com
Conversion to atomic modesetting, step three.
Wire up atomic helpers. Switch planes to atomic.
We are late to the party, the transitional helpers are gone,
so this can't be splitted into smaller steps any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190111053752.4004-6-kraxel@redhat.com
Create a separate bochs_hw_setformat function to configure
the framebuffer format (actually just the byteorder).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190111053752.4004-3-kraxel@redhat.com
Most unused callbacks can be NULL pointers these days.
Drop a bunch of empty encoder callbacks.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20190111053752.4004-2-kraxel@redhat.com
The DRM kernel API used to be defined in a handful of headers, pulled in
through drmP.h. It has since been split in multiple headers for the
different DRM components, and drmP.h turned into a legacy header that
just pulls in most of the DRM kernel API (and a large number of other
miscellaneous kernel headers).
In order to speed up compilation, replace inclusion of drmP.h with only
the required headers. It turns out that the rcar-du-drm driver already
includes most of the necessary headers, so the change is simple.
While at it, remove unneeded inclusion of other headers, and unneeded
forward declarations of structures.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
DU channels are routed to DPAD outputs in an SoC-dependent way. The
routing can be fixed (e.g. DU3 to DPAD0 on H3) or configurable (e.g. DU0
or DU1 to DPAD0 on D3/E3). The hardware offers no option to disconnect
DPAD outputs, which are thus always driven by a DU channel.
On SoCs that have less DU channels than DU outputs, such as D3 and E3,
the DPAD output is always driven when all channels are in use by other
outputs (such as the internal LVDS and HDMI encoders). This creates an
unwanted clone on the DPAD output.
However, the parallel output of the DU channels routed to DPAD can be
set to fixed levels in the DU channels themselves through the DOFLR
group register. Use this to turn the DPAD on or off by driving fixed
signals at the output of any DU channel not routed to a DPAD output.
This doesn't affect the DU output signals going to other outputs.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The rcar_du_crtc outputs field stores a bitmask of the outputs driven by
the CRTC. This changes based on the configuration requested by
userspace, and is used for the sole purpose of configuring the hardware.
The field thus belongs to the CRTC state. Move it to the
rcar_du_crtc_state structure.
As a result the rcar_du_crtc_route_output() function loses most of its
purpose. In order to remove it, move dpad0_source calculation to
rcar_du_atomic_commit_tail(), until the field gets moved to a state
structure. In order to simplify the rcar_du_group_set_routing()
implementation, we also store the DPAD1 source in a new dpad1_source
field which will move to a state structure with dpad0_source.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The RCAR_DU_FEATURE_EXT_CTRL_REGS feature flag is missing for H1 only,
which is a first generation device, not a second generation device as
reported in the device information table. Fix the H1 generation and use
generation checks to replace the feature flag.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Implement a .mode_valid() handler in the R-Car glue layer to reject
modes with an unsupported clock frequency.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The LVDS implementation on the RZ/G2E (a.k.a. R8A774C0) is very similar
to the one found on R-Car E3 (a.k.a. R8A77990), therefore add RZ/G2E
LVDS support to the LVDS encoder driver in a similar fashion to what is
done for R-Car E3.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Add support for the RZ/G2E (R8A774C0) SoC to the R-Car DU driver.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Using overlay sugar syntax makes the DTS files easier to read (and
write).
Overlay syntactic sugar for generating target-path fragments is
supported by the version of dtc supplied with the kernel since commit
50aafd6089 ("scripts/dtc: Update to upstream version
v1.4.6-21-g84e414b0b5bc").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
In case of error, the function devm_ioremap_resource() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Fixes: 8f1597c8f1 ("drm: shmobile: Perform initialization/cleanup at probe/remove time")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The mode and ajusted_mode passed to the bridge .mode_set() operation
should never be modified by the bridge (and are not in any of the
existing bridge drivers). Make them const to make this clear.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch adds the rk3066 VOP definitions.
The VOP or LCD Controller serves as interface between
framebuffer memory and a display device (LCD panel or TV set).
This SOC has two symmetrical LCDC's for a dual panel application.
A LCDC has 5 display layers.
Only 3 are used here.
- Video layer 0 (Win0)
- Video layer 1 (Win1)
- OSD layer (Win2)
Win0 and Win1 are exchangeable.
Maximum resolution is 1920x1080.
The LCDC0 output is connected to:
- LCDC0 IO (without IOMUX)
- HDMI TX video input
The LCDC1 output is connected to:
- LCDC1 IO (with IOMUX)
- HDMI TX video input
The HDMI TX input can switch between LCDC0 and LCDC1.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20181229133318.18128-4-jbx6244@gmail.com
I noticed a link that didn't work ...
Fixes: 1f2db3034c ("drm: of: introduce drm_of_find_panel_or_bridge")
Cc: Rob Herring <robh@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111164048.29067-2-daniel.vetter@ffwll.ch
It's not a core function, and the matching atomic functions are also
not in the core. Plus the suspend/resume helper is also already there.
Needs a tiny bit of open-coding, but less midlayer beats that I think.
v2: Rebase onto ast (which gained a new user).
Cc: Sam Bobroff <sbobroff@linux.ibm.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Rex Zhu <Rex.Zhu@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Shaoyun Liu <Shaoyun.Liu@amd.com>
Cc: Monk Liu <Monk.Liu@amd.com>
Cc: nouveau@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-4-daniel.vetter@ffwll.ch
The TPO (Toppoly) TPG110 is a pretty generic display driver
similar in vein to the Ilitek 93xx devices. It is not a panel
per se but a driver used with several low-cost noname panels.
This is used on the Nomadik NHK15 combined with a OSD
OSD057VA01CT display for WVGA 800x480.
The driver is pretty minimalistic right now but can be
extended to handle non-default polarities, gamma correction
etc.
The driver is based on the baked-in code in
drivers/video/fbdev/amba-clcd-nomadik.c which will be
decomissioned once this us upstream.
Cc: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111175406.27646-1-linus.walleij@linaro.org
When drivers pass non-empty lists of modifiers for initializing their
planes, we can infer that they allow framebuffer modifiers and set the
driver's allow_fb_modifiers mode config element.
In case the allow_fb_modifiers element was not set (some drivers tend
to set them after registering planes), the modifiers will still be
registered but won't be available to userspace unless the flag is set
later. However in that case, the IN_FORMATS blob won't be created.
In order to avoid this case and generally reduce the trouble associated
with the flag, always set allow_fb_modifiers when a non-empty list of
format modifiers is passed at plane init.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190104085610.5829-1-paul.kocialkowski@bootlin.com
Despite what the HVS documentation indicates, the VC4 does not actually
support SAND tiling modes for any RGB format and only semiplanar YUV420
formats (NV12/NV21) can be used in these tiling modes.
The driver currently claims to support RGB formats for the associated
modifiers, so remove them from the supported list in the
format_mod_supported helper for RGB formats.
Remove further checks that are no longer necessary along the way, since
semi-planar YUV420 formats support every SAND tiling mode.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181214141218.12671-1-paul.kocialkowski@bootlin.com
drm-next has been forwarded to 5.0-rc1, and we need it to apply the damage
helper for dirtyfb series from Noralf Trønnes.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
