If first segment is empty and migration_granularity is 1, we can't move this
at all.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are three status for background gc: on, off and sync, it's
a little bit confused to use test_opt(BG_GC) and test_opt(FORCE_FG_GC)
combinations to indicate status of background gc.
So let's remove F2FS_MOUNT_BG_GC and F2FS_MOUNT_FORCE_FG_GC mount
options, and add F2FS_OPTION().bggc_mode with below three status
to clean up codes and enhance bggc mode's scalability.
enum {
BGGC_MODE_ON, /* background gc is on */
BGGC_MODE_OFF, /* background gc is off */
BGGC_MODE_SYNC, /*
* background gc is on, migrating blocks
* like foreground gc
*/
};
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch removes F2FS_MOUNT_ADAPTIVE and F2FS_MOUNT_LFS mount options,
and add F2FS_OPTION.fs_mode with below two status to indicate filesystem
mode.
enum {
FS_MODE_ADAPTIVE, /* use both lfs/ssr allocation */
FS_MODE_LFS, /* use lfs allocation only */
};
It can enhance code readability and fs mode's scalability.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- rename datablock_addr() to data_blkaddr().
- wrap data_blkaddr() with f2fs_data_blkaddr() to clean up
parameters.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Lack of maintenance on comments may mislead developers, fix them.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Currently f2fs stats are only available from /d/f2fs/status. This patch
adds some of the f2fs stats to sysfs so that they are accessible even
when debugfs is not mounted.
The following sysfs nodes are added:
-/sys/fs/f2fs/<disk>/free_segments
-/sys/fs/f2fs/<disk>/cp_foreground_calls
-/sys/fs/f2fs/<disk>/cp_background_calls
-/sys/fs/f2fs/<disk>/gc_foreground_calls
-/sys/fs/f2fs/<disk>/gc_background_calls
-/sys/fs/f2fs/<disk>/moved_blocks_foreground
-/sys/fs/f2fs/<disk>/moved_blocks_background
-/sys/fs/f2fs/<disk>/avg_vblocks
Signed-off-by: Hridya Valsaraju <hridya@google.com>
[Jaegeuk Kim: allow STAT_FS without DEBUG_FS]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Mutex lock won't serialize callers, in order to avoid starving of unlucky
caller, let's use rwsem lock instead.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We must stop GC, once the segment becomes fully valid. Otherwise, it can
produce another dirty segments by moving valid blocks in the segment partially.
Ramon hit no free segment panic sometimes and saw this case happens when
validating reliable file pinning feature.
Signed-off-by: Ramon Pantin <pantin@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Eric mentioned, bare printk{,_ratelimited} won't show which
filesystem instance these message is coming from, this patch tries
to show fs instance with sb->s_id field in all places we missed
before.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Multi-device metadata should be updated in resize_fs as well.
Also, we check that the new FS size still reaches the last device.
Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Policy - foreground GC, LFS mode and greedy GC mode.
Under this policy, f2fs_gc() loops forever to GC as it doesn't have
enough free segements to proceed and thus it keeps calling gc_more
for the same victim segment. This can happen if the selected victim
segment could not be GC'd due to failed blkaddr validity check i.e.
is_alive() returns false for the blocks set in current validity map.
Fix this by not resetting the sbi->cur_victim_sec to NULL_SEGNO, when
the segment selected could not be GC'd. This helps to select another
segment for GC and thus helps to proceed forward with GC.
[Note]
This can happen due to is_alive as well as atomic_file which skipps
GC.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Policy - Foreground GC, LFS and greedy GC mode.
Under this policy, f2fs_gc() loops forever to GC as it doesn't have
enough free segements to proceed and thus it keeps calling gc_more
for the same victim segment. This can happen if the selected victim
segment could not be GC'd due to failed blkaddr validity check i.e.
is_alive() returns false for the blocks set in current validity map.
Fix this by keeping track of such invalid segments and skip those
segments for selection in get_victim_by_default() to avoid endless
GC loop under such error scenarios. Currently, add this logic under
CONFIG_F2FS_CHECK_FS to be able to root cause the issue in debug
version.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix wrong bitmap size]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_allocate_data_block() invalidates old block address and enable new block
address. Then, if we try to read old block by f2fs_submit_page_bio(), it will
give WARN due to reading invalid blocks.
Let's make the order sanely back.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs uses EFAULT as error number to indicate filesystem is corrupted
all the time, but generic filesystems use EUCLEAN for such condition,
we need to change to follow others.
This patch adds two new macros as below to wrap more generic error
code macros, and spread them in code.
EFSBADCRC EBADMSG /* Bad CRC detected */
EFSCORRUPTED EUCLEAN /* Filesystem is corrupted */
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
- Add and use f2fs_<level> macros
- Convert f2fs_msg to f2fs_printk
- Remove level from f2fs_printk and embed the level in the format
- Coalesce formats and align multi-line arguments
- Remove unnecessary duplicate extern f2fs_msg f2fs.h
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This ioctl shrinks a given length (aligned to sections) from end of the
main area. Any cursegs and valid blocks will be moved out before
invalidating the range.
This feature can be used for adjusting partition sizes online.
History of the patch:
Sahitya Tummala:
- Add this ioctl for f2fs_compat_ioctl() as well.
- Fix debugfs status to reflect the online resize changes.
- Fix potential race between online resize path and allocate new data
block path or gc path.
Others:
- Rename some identifiers.
- Add some error handling branches.
- Clear sbi->next_victim_seg[BG_GC/FG_GC] in shrinking range.
- Implement this interface as ext4's, and change the parameter from shrunk
bytes to new block count of F2FS.
- During resizing, force to empty sit_journal and forbid adding new
entries to it, in order to avoid invalid segno in journal after resize.
- Reduce sbi->user_block_count before resize starts.
- Commit the updated superblock first, and then update in-memory metadata
only when the former succeeds.
- Target block count must align to sections.
- Write checkpoint before and after committing the new superblock, w/o
CP_FSCK_FLAG respectively, so that the FS can be fixed by fsck even if
resize fails after the new superblock is committed.
- In free_segment_range(), reduce granularity of gc_mutex.
- Add protection on curseg migration.
- Add freeze_bdev() and thaw_bdev() for resize fs.
- Remove CUR_MAIN_SECS and use MAIN_SECS directly for allocation.
- Recover super_block and FS metadata when resize fails.
- No need to clear CP_FSCK_FLAG in update_ckpt_flags().
- Clean up the sb and fs metadata update functions for resize_fs.
Geert Uytterhoeven:
- Use div_u64*() for 64-bit divisions
Arnd Bergmann:
- Not all architectures support get_user() with a 64-bit argument:
ERROR: "__get_user_bad" [fs/f2fs/f2fs.ko] undefined!
Use copy_from_user() here, this will always work.
Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, f2fs_is_valid_blkaddr(, blkaddr, DATA_GENERIC) will check
whether @blkaddr locates in main area or not.
That check is weak, since the block address in range of main area can
point to the address which is not valid in segment info table, and we
can not detect such condition, we may suffer worse corruption as system
continues running.
So this patch introduce DATA_GENERIC_ENHANCE to enhance the sanity check
which trigger SIT bitmap check rather than only range check.
This patch did below changes as wel:
- set SBI_NEED_FSCK in f2fs_is_valid_blkaddr().
- get rid of is_valid_data_blkaddr() to avoid panic if blkaddr is invalid.
- introduce verify_fio_blkaddr() to wrap fio {new,old}_blkaddr validation check.
- spread blkaddr check in:
* f2fs_get_node_info()
* __read_out_blkaddrs()
* f2fs_submit_page_read()
* ra_data_block()
* do_recover_data()
This patch can fix bug reported from bugzilla below:
https://bugzilla.kernel.org/show_bug.cgi?id=203215https://bugzilla.kernel.org/show_bug.cgi?id=203223https://bugzilla.kernel.org/show_bug.cgi?id=203231https://bugzilla.kernel.org/show_bug.cgi?id=203235https://bugzilla.kernel.org/show_bug.cgi?id=203241
= Update by Jaegeuk Kim =
DATA_GENERIC_ENHANCE enhanced to validate block addresses on read/write paths.
But, xfstest/generic/446 compalins some generated kernel messages saying invalid
bitmap was detected when reading a block. The reaons is, when we get the
block addresses from extent_cache, there is no lock to synchronize it from
truncating the blocks in parallel.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch expands scalability of dnode layout, it allows address pointer
number of dnode aligning to specified size (now, the size is one byte by
default), and later the number can align to compress cluster size
(1 << n bytes, n=[2,..)), it can avoid cluster acrossing two dnode, making
design of compress meta layout simple.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Jungyeon reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=203211
- Overview
When mounting the attached crafted image and making a new file, I got this error and the error messages keep repeating.
The image is intentionally fuzzed from a normal f2fs image for testing and I run with option CONFIG_F2FS_CHECK_FS on.
- Reproduces
mkdir test
mount -t f2fs tmp.img test
cd test
touch t
- Messages
[ 58.820451] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.821485] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.822530] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.823571] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.824616] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.825640] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.826663] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.827698] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.828719] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.829759] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.830783] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.831828] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.832869] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.833888] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.834945] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.835996] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.837028] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.838051] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.839072] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.840100] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.841147] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.842186] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.843214] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.844267] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.845282] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.846305] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
[ 58.847341] F2FS-fs (sdb): Inconsistent segment (1) type [1, 0] in SSA and SIT
... (repeating)
During GC, if segment type stored in SSA and SIT is inconsistent, we just
skip migrating current segment directly, since we need to know the exact
type to decide the migration function we use.
So in foreground GC, we will easily run into a infinite loop as we may
select the same victim segment which has inconsistent type due to greedy
policy. In order to end up this, we choose to shutdown filesystem. For
backgrond GC, we need to do that as well, so that we can avoid latter
potential infinite looped foreground GC.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For a single device mount using a zoned block device, the zone
information for the device is stored in the sbi->devs single entry
array and sbi->s_ndevs is set to 1. This differs from a single device
mount using a regular block device which does not allocate sbi->devs
and sets sbi->s_ndevs to 0.
However, sbi->s_devs == 0 condition is used throughout the code to
differentiate a single device mount from a multi-device mount where
sbi->s_ndevs is always larger than 1. This results in problems with
single zoned block device volumes as these are treated as multi-device
mounts but do not have the start_blk and end_blk information set. One
of the problem observed is skipping of zone discard issuing resulting in
write commands being issued to full zones or unaligned to a zone write
pointer.
Fix this problem by simply treating the cases sbi->s_ndevs == 0 (single
regular block device mount) and sbi->s_ndevs == 1 (single zoned block
device mount) in the same manner. This is done by introducing the
helper function f2fs_is_multi_device() and using this helper in place
of direct tests of sbi->s_ndevs value, improving code readability.
Fixes: 7bb3a371d1 ("f2fs: Fix zoned block device support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For all ordered cases in f2fs_wait_on_page_writeback(), we need to
check PageWriteback status, so let's clean up to relocate the check
into f2fs_wait_on_page_writeback().
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
One report says memalloc failure during mount.
(unwind_backtrace) from [<c010cd4c>] (show_stack+0x10/0x14)
(show_stack) from [<c049c6b8>] (dump_stack+0x8c/0xa0)
(dump_stack) from [<c024fcf0>] (warn_alloc+0xc4/0x160)
(warn_alloc) from [<c0250218>] (__alloc_pages_nodemask+0x3f4/0x10d0)
(__alloc_pages_nodemask) from [<c0270450>] (kmalloc_order_trace+0x2c/0x120)
(kmalloc_order_trace) from [<c03fa748>] (build_node_manager+0x35c/0x688)
(build_node_manager) from [<c03de494>] (f2fs_fill_super+0xf0c/0x16cc)
(f2fs_fill_super) from [<c02a5864>] (mount_bdev+0x15c/0x188)
(mount_bdev) from [<c03da624>] (f2fs_mount+0x18/0x20)
(f2fs_mount) from [<c02a68b8>] (mount_fs+0x158/0x19c)
(mount_fs) from [<c02c3c9c>] (vfs_kern_mount+0x78/0x134)
(vfs_kern_mount) from [<c02c76ac>] (do_mount+0x474/0xca4)
(do_mount) from [<c02c8264>] (SyS_mount+0x94/0xbc)
(SyS_mount) from [<c0108180>] (ret_fast_syscall+0x0/0x48)
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch reorders flow from
- update page
- set_page_dirty
- wait_on_page_writeback
to
- wait_on_page_writeback
- update page
- set_page_dirty
The reason is:
- set_page_dirty will increase reference of dirty page, the reference
should be cleared before wait_on_page_writeback to keep its consistency.
- some devices need stable page during page writebacking, so we
should not change page's data.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Adjust the trace print in f2fs_get_victim() to cover GC done by
F2FS_IOC_GARBAGE_COLLECT_RANGE.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Allow node type segments also to be GC'd via f2fs ioctl
F2FS_IOC_GARBAGE_COLLECT_RANGE.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Section is minimal garbage collection unit of f2fs, in zoned block
device, or ancient block mapping flash device, in order to improve
GC efficiency, we can align GC unit to lower device erase unit,
normally, it consists of multiple of segments.
Once background or foreground GC triggers, it brings a large number
of IOs, which will impact user IO, and also occupy cpu/memory resource
intensively.
So, to reduce impact of GC on large size section, this patch supports
subsectional GC, in one cycle of GC, it only migrate partial segment{s}
in victim section. Currently, by default, we use sbi->segs_per_sec as
migration granularity.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Introduce a wrapper __is_large_section() to clean up codes.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When sbi->segs_per_sec > 1, and if some segno has 0 valid blocks before
gc starts, do_garbage_collect will skip counting seg_freed++, and this
will cause seg_freed < sbi->segs_per_sec and finally skip sec_freed++.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The encrypted file may be corrupted by GC in following case:
Time 1: | segment 1 blkaddr = A | GC -> | segment 2 blkaddr = B |
Encrypted block 1 is moved from blkaddr A of segment 1 to blkaddr B of
segment 2,
Time 2: | segment 1 blkaddr = B | GC -> | segment 3 blkaddr = C |
Before page 1 is written back and if segment 2 become a victim, then
page 1 is moved from blkaddr B of segment 2 to blkaddr Cof segment 3,
during the GC process of Time 2, f2fs should wait for page 1 written back
before reading it, or move_data_block will read a garbage block from
blkaddr B since page is not written back to blkaddr B yet.
Commit 6aa58d8a ("f2fs: readahead encrypted block during GC") introduce
ra_data_block to read encrypted block, but it forgets to add
f2fs_wait_on_page_writeback to avoid racing between GC and flush.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When migrating encrypted block from background GC thread, we only add
them into f2fs inner bio cache, but forget to submit the cached bio, it
may cause potential deadlock when we are waiting page writebacked, fix
it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Note that, it requires "f2fs: return correct errno in f2fs_gc".
This adds a lightweight non-persistent snapshotting scheme to f2fs.
To use, mount with the option checkpoint=disable, and to return to
normal operation, remount with checkpoint=enable. If the filesystem
is shut down before remounting with checkpoint=enable, it will revert
back to its apparent state when it was first mounted with
checkpoint=disable. This is useful for situations where you wish to be
able to roll back the state of the disk in case of some critical
failure.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
[Jaegeuk Kim: use SB_RDONLY instead of MS_RDONLY]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds to account skip count of background GC, and show stat
info via 'status' debugfs entry.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch avoids BUG_ON when f2fs_get_meta_page_nofail got EIO during
xfstests/generic/475.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This helps to control the frequency of submission of discard and
GC requests independently, based on the need.
Suggested-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Remove the verbose license text from f2fs files and replace them with
SPDX tags. This does not change the license of any of the code.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The f2fs_gc() called by f2fs_balance_fs() requires to be called outside of
fi->i_gc_rwsem[WRITE], since f2fs_gc() can try to grab it in a loop.
If it hits the miximum retrials in GC, let's give a chance to release
gc_mutex for a short time in order not to go into live lock in the worst
case.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When CONFIG_F2FS_FAULT_INJECTION is disabled, we get a warning about an
unused label:
fs/f2fs/segment.c: In function '__submit_discard_cmd':
fs/f2fs/segment.c:1059:1: error: label 'submit' defined but not used [-Werror=unused-label]
This could be fixed by adding another #ifdef around it, but the more
reliable way of doing this seems to be to remove the other #ifdefs
where that is easily possible.
By defining time_to_inject() as a trivial stub, most of the checks for
CONFIG_F2FS_FAULT_INJECTION can go away. This also leads to nicer
formatting of the code.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If caller of __get_meta_page() can handle error, let's propagate error
from __get_meta_page().
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Although mixed sync/async IOs can have continuous LBA, as they have
different IO priority, block IO scheduler will add them into different
queues and commit them separately, result in splited IOs which causes
wrose performance.
This patch gives high priority to synchronous IO of nodes, means that
once synchronous flow starts, it can interrupt asynchronous writeback
flow of system flusher, so more big IOs can be expected.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Ted reported:
"Hi, I was looking at f2fs's sources recently, and I noticed that there
is a very large number of non-static symbols which don't have a f2fs
prefix. There's well over a hundred (see attached below).
As one example, in fs/f2fs/dir.c there is:
unsigned char get_de_type(struct f2fs_dir_entry *de)
This function is clearly only useful for f2fs, but it has a generic
name. This means that if any other file system tries to have the same
symbol name, there will be a symbol conflict and the kernel would not
successfully build. It also means that when someone is looking f2fs
sources, it's not at all obvious whether a function such as
read_data_page(), invalidate_blocks(), is a generic kernel function
found in the fs, mm, or block layers, or a f2fs specific function.
You might want to fix this at some point. Hopefully Kent's bcachefs
isn't similarly using genericly named functions, since that might
cause conflicts with f2fs's functions --- but just as this would be a
problem that we would rightly insist that Kent fix, this is something
that we should have rightly insisted that f2fs should have fixed
before it was integrated into the mainline kernel.
acquire_orphan_inode
add_ino_entry
add_orphan_inode
allocate_data_block
allocate_new_segments
alloc_nid
alloc_nid_done
alloc_nid_failed
available_free_memory
...."
This patch adds "f2fs_" prefix for all non-static symbols in order to:
a) avoid conflict with other kernel generic symbols;
b) to indicate the function is f2fs specific one instead of generic
one;
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes error path of move_data_page:
- clear cold data flag if it fails to write page.
- redirty page for non-ENOMEM case.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs doesn't allow abuse on atomic write class interface, so except
limiting in-mem pages' total memory usage capacity, we need to limit
atomic-write usage as well when filesystem is seriously fragmented,
otherwise we may run into infinite loop during foreground GC because
target blocks in victim segment are belong to atomic opened file for
long time.
Now, we will detect failure due to atomic write in foreground GC, if
the count exceeds threshold, we will drop all atomic written data in
cache, by this, I expect it can keep our system running safely to
prevent Dos attack.
In addition, his patch adds to show GC skip information in debugfs,
now it just shows count of skipped caused by atomic write.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For non-migration IO, we will keep order of data/node blocks' submitting
as allocation sequence by sorting IOs in per log io_list list, but for
migration IO, it could be out-of-order.
In LFS mode, we should keep all IOs including migration IO be ordered,
so that this patch fixes to add an additional lock to keep submitting
order.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
