When offloading header re-writes, the HW re-calculates the relevant L3/L4
checksums. Hence, when upper layers (as done by OVS) ask for TC checksum action
offload together with pedit offload, don't err. This command now works:
tc filter add dev ens1f0 protocol ip parent ffff: prio 20 flower skip_sw
ip_proto tcp dst_port 9001
action pedit ex munge tcp dport set 0x1234 pipe
action csum tcp
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add the accessors for realizing if this is a csum action,
and for which fields checksum is needed.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
We wrongly direcly invoke hlist_del_rcu() and not hash_del_rcu() which
does a slightly different call now and may change later, fix that.
Fixes: a54e20b4fc ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When I introduced ptracer_cred I failed to consider the weirdness of
fork where the task_struct copies the old value by default. This
winds up leaving ptracer_cred set even when a process forks and
the child process does not wind up being ptraced.
Because ptracer_cred is not set on non-ptraced processes whose
parents were ptraced this has broken the ability of the enlightenment
window manager to start setuid children.
Fix this by properly initializing ptracer_cred in ptrace_init_task
This must be done with a little bit of care to preserve the current value
of ptracer_cred when ptrace carries through fork. Re-reading the
ptracer_cred from the ptracing process at this point is inconsistent
with how PT_PTRACE_CAP has been maintained all of these years.
Tested-by: Takashi Iwai <tiwai@suse.de>
Fixes: 64b875f7ac ("ptrace: Capture the ptracer's creds not PT_PTRACE_CAP")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The description of the connection between the dwmmc (SDIO) controller and
the Wifi chip, which is attached to the SDIO bus is wrong. Currently the
SDIO card can't be detected and thus the Wifi doesn't work.
Let's fix this by assigning the correct vmmc supply, which is the always on
regulator VDD_3V3 and remove the WLAN enable regulator altogether. Then to
properly deal with the power on/off sequence, add a mmc-pwrseq node to
describe the resources needed to detect the SDIO card.
Except for the WLAN enable GPIO and its corresponding assert/de-assert
delays, the mmc-pwrseq node also contains a handle to a clock provided by
the hi655x pmic. This clock is also needed to be able to turn on the WiFi
chip.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Move the board specific descriptions for the dwmmc nodes in the hi6220 SoC
dtsi, into the hikey dts as it's there these belongs.
While changing this, let's take the opportunity to drop the use of the
"ti,non-removable" binding for one of the dwmmc device nodes, as it's not a
valid binding and not used. Drop also the unnecessary use of "num-slots =
<0x1>" for all of the dwmmc nodes, as there is no need to set this since
when default number of slots is one.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Add these regulators to better describe the HW, but also because those is
needed in following changes.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The regulator is a part of the hikey board, therefore let's move it from
the hi6220 SoC dtsi file into the hikey dts file . Let's also rename the
regulator according to the datasheet (5V_HUB) to better reflect the HW.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The hi655x PMIC provides the regulators but also a clock. The latter is
missing so let's add it. This clock is used by WiFi/Bluetooth chip, but
that connection is done in a separate change on top of this one.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
[Ulf: Split patch and updated changelog]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The hi655x PMIC provides the regulators but also a clock. The latter is
missing in the definition, so extend the documentation to include this as
well.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
[Ulf: Split patch and updated changelog]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
If the optional power-off-delay-us property is found, insert the
corresponding delay after asserting the GPIO during power off. This enables
a graceful shutdown sequence for some devices.
Cc: linux-mmc@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
During power off, after the GPIO pin has been asserted, some devices like
the Wifi chip from TI, Wl18xx, needs a delay before the host continues with
clock gating and turning off regulators as to follow a graceful shutdown
sequence.
Therefore invent an optional power-off-delay-us DT binding for
mmc-pwrseq-simple, to allow us to support this constraint.
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mmc@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
I failed to properly onion-wrap the unwind code: We acquire the vblank
reference before we start with the wait-wound locking dance, hence we
must make sure we retry before we drop the reference. Oops.
v2: The vblank_put must be after the frambuffer_put (Michel). I suck at
unwrapping code that doesn't use separate labels for each stage, but
checks each pointer first ... While re-reading everything I also
realized that we must clean up the fb refcounts, and specifically
plane->old_fb before we drop the locks, either in the final unlocking,
or in the w/w retry path. Hence the correct fix is to drop the
vblank_put to the very bottom.
Fixes: 29dc0d1de1 ("drm: Roll out acquire context for the page_flip ioctl")
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Reported-by: Tommi Rantala <tt.rantala@gmail.com>
Cc: Tommi Rantala <tt.rantala@gmail.com>
Cc: Michel Dänzer <michel@daenzer.net>
Tested-by: Tommi Rantala <tt.rantala@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170522135945.28831-1-daniel.vetter@ffwll.ch
This model is actually called 92XXM2-8 in Windows driver. But since pin
configs for M22 and M28 are identical, just reuse M22 quirk.
Fixes external microphone (tested) and probably docking station ports
(not tested).
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull crypto fix from Herbert Xu:
"This fixes a regression in the skcipher interface that allows bogus
key parameters to hit underlying implementations which can cause
crashes"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: skcipher - Add missing API setkey checks
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Kees Cook <kees@outflux.net>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=vd/K
-----END PGP SIGNATURE-----
Merge tag 'pstore-v4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore fix from Kees Cook:
"Marta noticed another misbehavior in EFI pstore, which this fixes.
Hopefully this is the last of the v4.12 fixes for pstore!"
* tag 'pstore-v4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
efi-pstore: Fix write/erase id tracking
- Revert a 4.11 commit related to the ACPI-based handling of laptop
lids that made changes incompatible with existing user space
stacks and broke things there (Lv Zheng).
- Add .gitignore to the ACPI tools directory (Prarit Bhargava).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=2ew/
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert a 4.11 change that turned out to be problematic and add a
.gitignore file.
Specifics:
- Revert a 4.11 commit related to the ACPI-based handling of laptop
lids that made changes incompatible with existing user space stacks
and broke things there (Lv Zheng).
- Add .gitignore to the ACPI tools directory (Prarit Bhargava)"
* tag 'acpi-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI / button: Remove lid_init_state=method mode"
tools/power/acpi: Add .gitignore file
- Fix RTC wakeup from suspend-to-idle broken by the recent rework
of ACPI wakeup handling (Rafael Wysocki).
- Update intel_pstate driver documentation to reflect the current
code and explain how it works in more detail (Rafael Wysocki).
- Fix an issue related to CPU idleness detection on systems with
shared cpufreq policies in the schedutil governor (Juri Lelli).
- Fix a possible build issue in the dbx500 cpufreq driver (Arnd
Bergmann).
- Fix a function in the power capping framework core to return
an error code instead of 0 when there's an error (Dan Carpenter).
- Clean up variable definition in the hibernation core (Pushkar
Jambhlekar).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=2sNW
-----END PGP SIGNATURE-----
Merge tag 'pm-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix RTC wakeup from suspend-to-idle broken recently, fix CPU
idleness detection condition in the schedutil cpufreq governor, fix a
cpufreq driver build failure, fix an error code path in the power
capping framework, clean up the hibernate core and update the
intel_pstate documentation.
Specifics:
- Fix RTC wakeup from suspend-to-idle broken by the recent rework of
ACPI wakeup handling (Rafael Wysocki).
- Update intel_pstate driver documentation to reflect the current
code and explain how it works in more detail (Rafael Wysocki).
- Fix an issue related to CPU idleness detection on systems with
shared cpufreq policies in the schedutil governor (Juri Lelli).
- Fix a possible build issue in the dbx500 cpufreq driver (Arnd
Bergmann).
- Fix a function in the power capping framework core to return an
error code instead of 0 when there's an error (Dan Carpenter).
- Clean up variable definition in the hibernation core (Pushkar
Jambhlekar)"
* tag 'pm-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: dbx500: add a Kconfig symbol
PM / hibernate: Declare variables as static
PowerCap: Fix an error code in powercap_register_zone()
RTC: rtc-cmos: Fix wakeup from suspend-to-idle
PM / wakeup: Fix up wakeup_source_report_event()
cpufreq: intel_pstate: Document the current behavior and user interface
cpufreq: schedutil: use now as reference when aggregating shared policy requests
We need to initializes those variables to 0 for platforms that do not
provide ACPI parameters. Otherwise, we set sda_hold_time to random
values, breaking e.g. Galileo and IOT2000 boards.
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Fixes: 9d64084330 ("i2c: designware: don't infer timings described by ACPI from clock rate")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When using the 'object' sysfs attribute, T100 is not displayed in
the output.
Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The datasheet and application note does not mention an allowed range for
the M09_REGISTER_THRESHOLD parameter. One of our customers needs to set
lower values than 20 and they seem to work just fine on EDT EP0xx0M09 with
T5x06 touch.
So, lacking a known lower limit, we increase the range for thresholds,
and set the lower limit to 0. The documentation is updated accordingly.
Signed-off-by: Schoefegger Stefan <stefan.schoefegger@ginzinger.com>
Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com>
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Prior to the pstore interface refactoring, the "id" generated during
a backend pstore_write() was only retained by the internal pstore
inode tracking list. Additionally the "part" was ignored, so EFI
would encode this in the id. This corrects the misunderstandings
and correctly sets "id" during pstore_write(), and uses "part"
directly during pstore_erase().
Reported-by: Marta Lofstedt <marta.lofstedt@intel.com>
Fixes: 76cc9580e3 ("pstore: Replace arguments for write() API")
Fixes: a61072aae6 ("pstore: Replace arguments for erase() API")
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Marta Lofstedt <marta.lofstedt@intel.com>
Commit cc7b0d4955 ("PCI: designware: Update PCI config space remap
function") made PCI configuration requests non-posted, which means we now
get a synchronous abort when the CFG space read to probe for downstream
devices times out.
Synchronous aborts need to be handled differently from the async aborts we
were getting before, in particular the PC needs to be advanced when
resolving the abort. This is mostly a copy of what other PCI drivers do on
ARM to handle those aborts.
[bhelgaas: changelog, "Fixes"]
Fixes: cc7b0d4955 ("PCI: designware: Update PCI config space remap function")
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
When a switch endpoint is configured without NTB, the mmio_ntb registers
will read all zeros. However, in corner case configurations where the
partition ID is not zero and NTB is not enabled, the code will have the
wrong partition ID and this causes the driver to use the wrong set of
drivers. To fix this we simply take the partition ID from the system info
region.
Reported-by: Dingbao Chen <dingbao.chen@microsemi.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Convert from "cdev_add() + device_add()" to cdev_device_add(), and from
"device_del() + cdev_del()" to cdev_device_del().
[bhelgaas: changelog]
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
If NO_DMA=y:
drivers/built-in.o: In function `__pci_epc_create':
(.text+0xef4e): undefined reference to `bad_dma_ops'
drivers/built-in.o: In function `pci_epc_add_epf':
(.text+0xf676): undefined reference to `bad_dma_ops'
drivers/built-in.o: In function `pci_epf_alloc_space':
(.text+0xfa32): undefined reference to `bad_dma_ops'
drivers/built-in.o: In function `pci_epf_free_space':
(.text+0xfac4): undefined reference to `bad_dma_ops'
Add a dependency on HAS_DMA to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Default value of io.low limit is 0. If user doesn't configure the limit,
last patch makes cgroup be throttled to very tiny bps/iops, which could
stall the system. A cgroup with default settings of io.low limit really
means nothing, so we force user to configure all settings, otherwise
io.low limit doesn't take effect. With this stragety, default setting of
latency/idle isn't important, so just set them to very conservative and
safe value.
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
If a cgroup with low limit 0 for both bps/iops, the cgroup's low limit
is ignored and we throttle the cgroup with its max limit. In this way,
other cgroups with a low limit will not get protected. To fix this, we
don't do the exception any more. cgroup will be throttled to a limit 0
if it uese default setting. To avoid completed stall, we give such
cgroup tiny IO resources.
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
These info are important to understand what's happening and help debug.
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
For idle time, children's setting should not be bigger than parent's.
For latency target, children's setting should not be smaller than
parent's. The leaf nodes will adjust their settings according to the
hierarchy and compare their IO with the settings and do
upgrade/downgrade. parents nodes don't need to track their IO
latency/idle time.
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
If a kthread forks (e.g. usermodehelper since commit 1da5c46fa9) but
fails in copy_process() between calling dup_task_struct() and setting
p->set_child_tid, then the value of p->set_child_tid will be inherited
from the parent and get prematurely freed by free_kthread_struct().
kthread()
- worker_thread()
- process_one_work()
| - call_usermodehelper_exec_work()
| - kernel_thread()
| - _do_fork()
| - copy_process()
| - dup_task_struct()
| - arch_dup_task_struct()
| - tsk->set_child_tid = current->set_child_tid // implied
| - ...
| - goto bad_fork_*
| - ...
| - free_task(tsk)
| - free_kthread_struct(tsk)
| - kfree(tsk->set_child_tid)
- ...
- schedule()
- __schedule()
- wq_worker_sleeping()
- kthread_data(task)->flags // UAF
The problem started showing up with commit 1da5c46fa9 since it reused
->set_child_tid for the kthread worker data.
A better long-term solution might be to get rid of the ->set_child_tid
abuse. The comment in set_kthread_struct() also looks slightly wrong.
Debugged-by: Jamie Iles <jamie.iles@oracle.com>
Fixes: 1da5c46fa9 ("kthread: Make struct kthread kmalloc'ed")
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jamie Iles <jamie.iles@oracle.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170509073959.17858-1-vegard.nossum@oracle.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Markus reported that the glibc/nptl/tst-robustpi8 test was failing after
commit:
cfafcd117d ("futex: Rework futex_lock_pi() to use rt_mutex_*_proxy_lock()")
The following trace shows the problem:
ld-linux-x86-64-2161 [019] .... 410.760971: SyS_futex: 00007ffbeb76b028: 80000875 op=FUTEX_LOCK_PI
ld-linux-x86-64-2161 [019] ...1 410.760972: lock_pi_update_atomic: 00007ffbeb76b028: curval=80000875 uval=80000875 newval=80000875 ret=0
ld-linux-x86-64-2165 [011] .... 410.760978: SyS_futex: 00007ffbeb76b028: 80000875 op=FUTEX_UNLOCK_PI
ld-linux-x86-64-2165 [011] d..1 410.760979: do_futex: 00007ffbeb76b028: curval=80000875 uval=80000875 newval=80000871 ret=0
ld-linux-x86-64-2165 [011] .... 410.760980: SyS_futex: 00007ffbeb76b028: 80000871 ret=0000
ld-linux-x86-64-2161 [019] .... 410.760980: SyS_futex: 00007ffbeb76b028: 80000871 ret=ETIMEDOUT
Task 2165 does an UNLOCK_PI, assigning the lock to the waiter task 2161
which then returns with -ETIMEDOUT. That wrecks the lock state, because now
the owner isn't aware it acquired the lock and removes the pending robust
list entry.
If 2161 is killed, the robust list will not clear out this futex and the
subsequent acquire on this futex will then (correctly) result in -ESRCH
which is unexpected by glibc, triggers an internal assertion and dies.
Task 2161 Task 2165
rt_mutex_wait_proxy_lock()
timeout();
/* T2161 is still queued in the waiter list */
return -ETIMEDOUT;
futex_unlock_pi()
spin_lock(hb->lock);
rtmutex_unlock()
remove_rtmutex_waiter(T2161);
mark_lock_available();
/* Make the next waiter owner of the user space side */
futex_uval = 2161;
spin_unlock(hb->lock);
spin_lock(hb->lock);
rt_mutex_cleanup_proxy_lock()
if (rtmutex_owner() !== current)
...
return FAIL;
....
return -ETIMEOUT;
This means that rt_mutex_cleanup_proxy_lock() needs to call
try_to_take_rt_mutex() so it can take over the rtmutex correctly which was
assigned by the waker. If the rtmutex is owned by some other task then this
call is harmless and just confirmes that the waiter is not able to acquire
it.
While there, fix what looks like a merge error which resulted in
rt_mutex_cleanup_proxy_lock() having two calls to
fixup_rt_mutex_waiters() and rt_mutex_wait_proxy_lock() not having any.
Both should have one, since both potentially touch the waiter list.
Fixes: 38d589f2fd ("futex,rt_mutex: Restructure rt_mutex_finish_proxy_lock()")
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Bug-Spotted-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Link: http://lkml.kernel.org/r/20170519154850.mlomgdsd26drq5j6@hirez.programming.kicks-ass.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull networking fixes from David Miller:
"Mostly netfilter bug fixes in here, but we have some bits elsewhere as
well.
1) Don't do SNAT replies for non-NATed connections in IPVS, from
Julian Anastasov.
2) Don't delete conntrack helpers while they are still in use, from
Liping Zhang.
3) Fix zero padding in xtables's xt_data_to_user(), from Willem de
Bruijn.
4) Add proper RCU protection to nf_tables_dump_set() because we
cannot guarantee that we hold the NFNL_SUBSYS_NFTABLES lock. From
Liping Zhang.
5) Initialize rcv_mss in tcp_disconnect(), from Wei Wang.
6) smsc95xx devices can't handle IPV6 checksums fully, so don't
advertise support for offloading them. From Nisar Sayed.
7) Fix out-of-bounds access in __ip6_append_data(), from Eric
Dumazet.
8) Make atl2_probe() propagate the error code properly on failures,
from Alexey Khoroshilov.
9) arp_target[] in bond_check_params() is used uninitialized. This
got changes from a global static to a local variable, which is how
this mistake happened. Fix from Jarod Wilson.
10) Fix fallout from unnecessary NULL check removal in cls_matchall,
from Jiri Pirko. This is definitely brown paper bag territory..."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits)
net: sched: cls_matchall: fix null pointer dereference
vsock: use new wait API for vsock_stream_sendmsg()
bonding: fix randomly populated arp target array
net: Make IP alignment calulations clearer.
bonding: fix accounting of active ports in 3ad
net: atheros: atl2: don't return zero on failure path in atl2_probe()
ipv6: fix out of bound writes in __ip6_append_data()
bridge: start hello_timer when enabling KERNEL_STP in br_stp_start
smsc95xx: Support only IPv4 TCP/UDP csum offload
arp: always override existing neigh entries with gratuitous ARP
arp: postpone addr_type calculation to as late as possible
arp: decompose is_garp logic into a separate function
arp: fixed error in a comment
tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0
netfilter: xtables: fix build failure from COMPAT_XT_ALIGN outside CONFIG_COMPAT
ebtables: arpreply: Add the standard target sanity check
netfilter: nf_tables: revisit chain/object refcounting from elements
netfilter: nf_tables: missing sanitization in data from userspace
netfilter: nf_tables: can't assume lock is acquired when dumping set elems
netfilter: synproxy: fix conntrackd interaction
...
The driver checks an incorrect flag of functionality of adapter.
When a driver requires i2c_smbus_read_byte_data and
i2c_smbus_write_byte_data, it should check I2C_FUNC_SMBUS_BYTE_DATA
instead I2C_FUNC_I2C.
This patch fixes the problem.
Signed-off-by: Tin Huynh <tnhuynh@apm.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
fix extra controller reference taken on reconnect by moving
reference to initial controller create
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
correct nvme status set on abort. Patch that changed status to being actual
nvme status crossed in the night with the patch that added abort values.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Per the review by Sagi on:
http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html
Looked at existing warn vs info vs err dev_xxx levels for the messages
printed on reconnects and deletes:
- Resets due to error and resets transitioned to deletes are dev_warn
- Other reset/disconnect messages are dev_info
- Removed chatty io queue related messages
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Per the recommendation by Sagi on:
http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html
An extra reference was pointed out. There's no issue with the
references, but rather a literal interpretation of what the comment
is saying.
Reword the comment to avoid confusion.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Sync with Sagi's recent addition of ctrl_loss_tmo in the core fabrics
layer.
Remove local connect limits and connect_attempts variable.
Use fabrics new nr_connects variable and use of nvmf_should_reconnect()
Refactor duplicate reconnect failure code.
Addresses review comment by Sagi on controller reset support:
http://lists.infradead.org/pipermail/linux-nvme/2017-April/009261.html
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove the local copy of reconnect_delay.
Use the value in the controller options directly.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Since the head is guaranteed by the check above to be null, the call_rcu
would explode. Remove the previously logically dead code that was made
logically very much alive and kicking.
Fixes: 985538eee0 ("net/sched: remove redundant null check on head")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No one uses it any more, so remove it.
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
NVMe may add request into requeue list simply and not kick off the
requeue if hw queues are stopped. Then blk_mq_abort_requeue_list()
is called in both nvme_kill_queues() and nvme_ns_remove() for
dealing with this issue.
Unfortunately blk_mq_abort_requeue_list() is absolutely a
race maker, for example, one request may be requeued during
the aborting. So this patch just calls blk_mq_kick_requeue_list() in
nvme_kill_queues() to handle this issue like what nvme_start_queues()
does. Now all requests in requeue list when queues are stopped will be
handled by blk_mq_kick_requeue_list() when queues are restarted, either
in nvme_start_queues() or in nvme_kill_queues().
Cc: stable@vger.kernel.org
Reported-by: Zhang Yi <yizhan@redhat.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Inside nvme_kill_queues(), we have to start hw queues for
draining requests in sw queues, .dispatch list and requeue list,
so use blk_mq_start_hw_queues() instead of blk_mq_start_stopped_hw_queues()
which only run queues if queues are stopped, but the queues may have
been started already, for example nvme_start_queues() is called in reset work
function.
blk_mq_start_hw_queues() run hw queues in current context, instead
of running asynchronously like before. Given nvme_kill_queues() is
run from either remove context or reset worker context, both are fine
to run hw queue directly. And the mutex of namespaces_mutex isn't a
problem too becasue nvme_start_freeze() runs hw queue in this way
already.
Cc: stable@vger.kernel.org
Reported-by: Zhang Yi <yizhan@redhat.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In the case of small NVMe-oF queue size (<32) we may enter a deadlock
caused by the fact that the IB completions aren't sent waiting for 32
and the send queue will fill up.
The error is seen as (using mlx5):
[ 2048.693355] mlx5_0:mlx5_ib_post_send:3765:(pid 7273):
[ 2048.693360] nvme nvme1: nvme_rdma_post_send failed with error code -12
This patch changes the way the signaling is done so that it depends on
the queue depth now. The magic define has been removed completely.
Cc: stable@vger.kernel.org
Signed-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu>
Signed-off-by: Samuel Jones <sjones@kalray.eu>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
As reported by Michal, vsock_stream_sendmsg() could still
sleep at vsock_stream_has_space() after prepare_to_wait():
vsock_stream_has_space
vmci_transport_stream_has_space
vmci_qpair_produce_free_space
qp_lock
qp_acquire_queue_mutex
mutex_lock
Just switch to the new wait API like we did for commit
d9dc8b0f8b ("net: fix sleeping for sk_wait_event()").
Reported-by: Michal Kubecek <mkubecek@suse.cz>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit dc9c4d0fe0, the arp_target array moved from a static global
to a local variable. By the nature of static globals, the array used to
be initialized to all 0. At present, it's full of random data, which
that gets interpreted as arp_target values, when none have actually been
specified. Systems end up booting with spew along these lines:
[ 32.161783] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[ 32.168475] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[ 32.175089] 8021q: adding VLAN 0 to HW filter on device lacp0
[ 32.193091] IPv6: ADDRCONF(NETDEV_UP): lacp0: link is not ready
[ 32.204892] lacp0: Setting MII monitoring interval to 100
[ 32.211071] lacp0: Removing ARP target 216.124.228.17
[ 32.216824] lacp0: Removing ARP target 218.160.255.255
[ 32.222646] lacp0: Removing ARP target 185.170.136.184
[ 32.228496] lacp0: invalid ARP target 255.255.255.255 specified for removal
[ 32.236294] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
[ 32.243987] lacp0: Removing ARP target 56.125.228.17
[ 32.249625] lacp0: Removing ARP target 218.160.255.255
[ 32.255432] lacp0: Removing ARP target 15.157.233.184
[ 32.261165] lacp0: invalid ARP target 255.255.255.255 specified for removal
[ 32.268939] lacp0: option arp_ip_target: invalid value (-255.255.255.255)
[ 32.276632] lacp0: Removing ARP target 16.0.0.0
[ 32.281755] lacp0: Removing ARP target 218.160.255.255
[ 32.287567] lacp0: Removing ARP target 72.125.228.17
[ 32.293165] lacp0: Removing ARP target 218.160.255.255
[ 32.298970] lacp0: Removing ARP target 8.125.228.17
[ 32.304458] lacp0: Removing ARP target 218.160.255.255
None of these were actually specified as ARP targets, and the driver does
seem to clean up the mess okay, but it's rather noisy and confusing, leaks
values to userspace, and the 255.255.255.255 spew shows up even when debug
prints are disabled.
The fix: just zero out arp_target at init time.
While we're in here, init arp_all_targets_value in the right place.
Fixes: dc9c4d0fe0 ("bonding: reduce scope of some global variables")
CC: Mahesh Bandewar <maheshb@google.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: netdev@vger.kernel.org
CC: stable@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
