Dirty logging tracks sptes in 4k granularity, meaning that large sptes
have to be split. If live migration is successful, the guest in the
source machine will be destroyed and large sptes will be created in the
destination. However, the guest continues to run in the source machine
(for example if live migration fails), small sptes will remain around
and cause bad performance.
This patch introduce lazy collapsing of small sptes into large sptes.
The rmap will be scanned in ioctl context when dirty logging is stopped,
dropping those sptes which can be collapsed into a single large-page spte.
Later page faults will create the large-page sptes.
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Message-Id: <1428046825-6905-1-git-send-email-wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CR2 is not cleared as it should after reset. See Intel SDM table named "IA-32
Processor States Following Power-up, Reset, or INIT".
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Message-Id: <1427933438-12782-5-git-send-email-namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DR0-DR3 are not cleared as they should during reset and when they are set from
userspace. It appears to be caused by c77fb5fe6f ("KVM: x86: Allow the guest
to run with dirty debug registers").
Force their reload on these situations.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Message-Id: <1427933438-12782-4-git-send-email-namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After reset, the CPU can change the BSP, which will be used upon INIT. Reset
should return the BSP which QEMU asked for, and therefore handled accordingly.
To quote: "If the MP protocol has completed and a BSP is chosen, subsequent
INITs (either to a specific processor or system wide) do not cause the MP
protocol to be repeated."
[Intel SDM 8.4.2: MP Initialization Protocol Requirements and Restrictions]
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Message-Id: <1427933438-12782-3-git-send-email-namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
recalculate_apic_map() uses two passes over all VCPUs. This is a relic
from time when we selected a global mode in the first pass and set up
the optimized table in the second pass (to have a consistent mode).
Recent changes made mixed mode unoptimized and we can do it in one pass.
Format of logical MDA is a function of the mode, so we encode it in
apic_logical_id() and drop obsoleted variables from the struct.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Message-Id: <1423766494-26150-5-git-send-email-rkrcmar@redhat.com>
[Add lid_bits temporary in apic_logical_id. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We want to support mixed modes and the easiest solution is to avoid
optimizing those weird and unlikely scenarios.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Message-Id: <1423766494-26150-4-git-send-email-rkrcmar@redhat.com>
[Add comment above KVM_APIC_MODE_* defines. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Broadcast allowed only one global APIC mode, but mixed modes are
theoretically possible. x2APIC IPI doesn't mean 0xff as broadcast,
the rest does.
x2APIC broadcasts are accepted by xAPIC. If we take SDM to be logical,
even addreses beginning with 0xff should be accepted, but real hardware
disagrees. This patch aims for simple code by considering most of real
behavior as undefined.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Message-Id: <1423766494-26150-3-git-send-email-rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In mixed modes, we musn't deliver xAPIC IPIs like x2APIC and vice versa.
Instead of preserving the information in apic_send_ipi(), we regain it
by converting all destinations into correct MDA in the slow path.
This allows easier reasoning about subsequent matching.
Our kvm_apic_broadcast() had an interesting design decision: it didn't
consider IOxAPIC 0xff as broadcast in x2APIC mode ...
everything worked because IOxAPIC can't set that in physical mode and
logical mode considered it as a message for first 8 VCPUs.
This patch interprets IOxAPIC 0xff as x2APIC broadcast.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Message-Id: <1423766494-26150-2-git-send-email-rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After speed-up of cpuid_maxphyaddr() it can be called frequently:
instead of heavyweight enumeration of CPUID entries it returns a cached
pre-computed value. It is also inlined now. So caching its result became
unnecessary and can be removed.
Signed-off-by: Eugene Korenevsky <ekorenevsky@gmail.com>
Message-Id: <20150329205644.GA1258@gnote>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On each VM-entry CPU should check the following VMCS fields for zero bits
beyond physical address width:
- APIC-access address
- virtual-APIC address
- posted-interrupt descriptor address
This patch adds these checks required by Intel SDM.
Signed-off-by: Eugene Korenevsky <ekorenevsky@gmail.com>
Message-Id: <20150329205627.GA1244@gnote>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
cpuid_maxphyaddr(), which performs lot of memory accesses is called
extensively across KVM, especially in nVMX code.
This patch adds a cached value of maxphyaddr to vcpu.arch to reduce the
pressure onto CPU cache and simplify the code of cpuid_maxphyaddr()
callers. The cached value is initialized in kvm_arch_vcpu_init() and
reloaded every time CPUID is updated by usermode. It is obvious that
these reloads occur infrequently.
Signed-off-by: Eugene Korenevsky <ekorenevsky@gmail.com>
Message-Id: <20150329205612.GA1223@gnote>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Exposing the on-stack error code with internal error is cheap and
potentially useful.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Message-Id: <1428001865-32280-1-git-send-email-rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we were migrated right after __getcpu, but before reading the
migration_count, we wouldn't notice that we read TSC of a different
VCPU, nor that KVM's bug made pvti invalid, as only migration_count
on source VCPU is increased.
Change vdso instead of updating migration_count on destination.
Cc: stable@vger.kernel.org
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Fixes: 0a4e6be9ca ("x86: kvm: Revert "remove sched notifier for cross-cpu migrations"")
Message-Id: <1428000263-11892-1-git-send-email-rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The newly-added tracepoint shows the following results on
the tscdeadline_latency test:
qemu-kvm-8387 [002] 6425.558974: kvm_vcpu_wakeup: poll time 10407 ns
qemu-kvm-8387 [002] 6425.558984: kvm_vcpu_wakeup: poll time 0 ns
qemu-kvm-8387 [002] 6425.561242: kvm_vcpu_wakeup: poll time 10477 ns
qemu-kvm-8387 [002] 6425.561251: kvm_vcpu_wakeup: poll time 0 ns
and so on. This is because we need to go through kvm_vcpu_block again
after the timer IRQ is injected. Avoid it by polling once before
entering kvm_vcpu_block.
On my machine (Xeon E5 Sandy Bridge) this removes about 500 cycles (7%)
from the latency of the TSC deadline timer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the old __vcpu_run to vcpu_run, and extract part of it to a new
function vcpu_block.
The next patch will add a new condition in vcpu_block, avoid extra
indentation.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Guest can't be booted w/ ept=0, there is a message dumped as below:
If you're running a guest on an Intel machine without unrestricted mode
support, the failure can be most likely due to the guest entering an invalid
state for Intel VT. For example, the guest maybe running in big real mode
which is not supported on less recent Intel processors.
EAX=00000011 EBX=f000d2f6 ECX=00006cac EDX=000f8956
ESI=bffbdf62 EDI=00000000 EBP=00006c68 ESP=00006c68
EIP=0000d187 EFL=00000004 [-----P-] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =e000 000e0000 ffffffff 00809300 DPL=0 DS16 [-WA]
CS =f000 000f0000 ffffffff 00809b00 DPL=0 CS16 [-RA]
SS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA]
DS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA]
FS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA]
GS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA]
LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT
TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy
GDT= 000f6a80 00000037
IDT= 000f6abe 00000000
CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000
DR6=00000000ffff0ff0 DR7=0000000000000400
EFER=0000000000000000
Code=01 1e b8 6a 2e 0f 01 16 74 6a 0f 20 c0 66 83 c8 01 0f 22 c0 <66> ea 8f d1 0f 00 08 00 b8 10 00 00 00 8e d8 8e c0 8e d0 8e e0 8e e8 89 c8 ff e2 89 c1 b8X
X86 eflags bit 1 is fixed set, which means that 1 << 1 is set instead of 1,
this patch fix it.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Message-Id: <1428473294-6633-1-git-send-email-wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Interrupt entry points are handled with the following code,
each 32-byte code block contains seven entry points:
...
[push][jump 22] // 4 bytes
[push][jump 18] // 4 bytes
[push][jump 14] // 4 bytes
[push][jump 10] // 4 bytes
[push][jump 6] // 4 bytes
[push][jump 2] // 4 bytes
[push][jump common_interrupt][padding] // 8 bytes
[push][jump]
[push][jump]
[push][jump]
[push][jump]
[push][jump]
[push][jump]
[push][jump common_interrupt][padding]
[padding_2]
common_interrupt:
And there is a table which holds pointers to every entry point,
IOW: to every push.
In cold cache, two jumps are still costlier than one, even
though we get the benefit of them residing in the same
cacheline.
This change replaces short jumps with near ones to
'common_interrupt', and pads every push+jump pair to 8 bytes. This
way, each interrupt takes only one jump.
This change replaces ".p2align CONFIG_X86_L1_CACHE_SHIFT" before
dispatch table with ".align 8" - we do not need anything
stronger than that.
The table of entry addresses (the interrupt[] array) is no
longer necessary, the address of entries can be easily
calculated as (irq_entries_start + i*8).
text data bss dec hex filename
12546 0 0 12546 3102 entry_64.o.before
11626 0 0 11626 2d6a entry_64.o
The size decrease is because 1656 bytes of .init.rodata are
gone. That's initdata, though. The resident size does go up a
bit.
Run-tested (32 and 64 bits).
Acked-and-Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1428090553-7283-1-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This change does two things:
Copy-pastes "retint_swapgs:" code into syscall handling code,
the copy is under "syscall_return:" label. The code is unchanged
apart from some label renames.
Removes "opportunistic sysret" code from "retint_swapgs:" code
block, since now it won't be reached by syscall return. This in
fact removes most of the code in question.
text data bss dec hex filename
12530 0 0 12530 30f2 entry_64.o.before
12562 0 0 12562 3112 entry_64.o
Run-tested.
Acked-and-Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427993219-7291-1-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I got below kernel panic during kdump test on Thinkpad T420
laptop:
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000037ba4fff]
[ 0.000000] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81d21910
...
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff817c2a26>] dump_stack+0x45/0x57
[ 0.000000] [<ffffffff817bc8d2>] panic+0xd0/0x204
[ 0.000000] [<ffffffff81d21910>] ? numa_clear_kernel_node_hotplug+0xe6/0xf2
[ 0.000000] [<ffffffff8107741b>] __stack_chk_fail+0x1b/0x20
[ 0.000000] [<ffffffff81d21910>] numa_clear_kernel_node_hotplug+0xe6/0xf2
[ 0.000000] [<ffffffff81d21e5d>] numa_init+0x1a5/0x520
[ 0.000000] [<ffffffff81d222b1>] x86_numa_init+0x19/0x3d
[ 0.000000] [<ffffffff81d22460>] initmem_init+0x9/0xb
[ 0.000000] [<ffffffff81d0d00c>] setup_arch+0x94f/0xc82
[ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120
[ 0.000000] [<ffffffff817bd0bb>] ? printk+0x55/0x6b
[ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120
[ 0.000000] [<ffffffff81d05d9b>] start_kernel+0xe8/0x4d6
[ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120
[ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120
[ 0.000000] [<ffffffff81d055ee>] x86_64_start_reservations+0x2a/0x2c
[ 0.000000] [<ffffffff81d05751>] x86_64_start_kernel+0x161/0x184
[ 0.000000] ---[ end Kernel panic - not syncing: stack-protector: Kernel sta
This is caused by writing over the end of numa mask bitmap
in numa_clear_kernel_node().
numa_clear_kernel_node() tries to set the node id in a mask bitmap,
by iterating all reserved regions and assuming that every region
has a valid nid.
This assumption is not true because there's an exception for some
graphic memory quirks. See trim_snb_memory() in arch/x86/kernel/setup.c
It is easily to reproduce the bug in the kdump kernel because kdump
kernel use pre-reserved memory instead of the whole memory, but
kexec pass other reserved memory ranges to 2nd kernel as well.
like below in my test:
kdump kernel ram 0x2d000000 - 0x37bfffff
One of the reserved regions: 0x40000000 - 0x40100000 which
includes 0x40004000, a page excluded in trim_snb_memory(). For
this memblock reserved region the nid is not set, it is still
default value MAX_NUMNODES. later node_set will set bit
MAX_NUMNODES thus stack corruption happen.
This also happens when booting with mem= kernel commandline
during my test.
Fixing it by adding a check, do not call node_set in case nid is
MAX_NUMNODES.
Signed-off-by: Dave Young <dyoung@redhat.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bhe@redhat.com
Cc: qiuxishi@huawei.com
Link: http://lkml.kernel.org/r/20150407134132.GA23522@dhcp-16-198.nay.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Take a look at the first instruction byte before optimizing the NOP -
there might be something else there already, like the ALTERNATIVE_2()
in rdtsc_barrier() which NOPs out on AMD even though we just
patched in an MFENCE.
This happens because the alternatives sees X86_FEATURE_MFENCE_RDTSC,
AMD CPUs set it, we patch in the MFENCE and right afterwards it sees
X86_FEATURE_LFENCE_RDTSC which AMD CPUs don't set and we blindly
optimize the NOP.
Checking whether at least the first byte is 0x90 prevents that.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1428181662-18020-1-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On failure, sys_execve() does not clobber EXTRA_REGS, so we can
just return to userpsace without saving/restoring them.
On success, ELF_PLAT_INIT() in sys_execve() clears all these
registers.
On other executable formats:
- binfmt_flat.c has similar FLAT_PLAT_INIT, but x86 (and everyone
else except sh) doesn't define it.
- binfmt_elf_fdpic.c has ELF_FDPIC_PLAT_INIT, but x86 (and most
others) doesn't define it.
- There are no such hooks in binfmt_aout.c et al. We inherit
EXTRA_REGS from the prior executable.
This inconsistency was not intended.
This change removes SAVE/RESTORE_EXTRA_REGS in stub_execve,
removes register clearing in ELF_PLAT_INIT(),
and instead simply clears them on success in stub_execve.
Run-tested.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1428173719-7637-1-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The 'pax' argument is unnecesary. Instead, store the RAX value
directly in regs.
This pattern goes all the way back to 2.1.106pre1, when restore_sigcontext()
was changed to return an error code instead of EAX directly:
https://git.kernel.org/cgit/linux/kernel/git/history/history.git/diff/arch/i386/kernel/signal.c?id=9a8f8b7ca3f319bd668298d447bdf32730e51174
In 2007 sigaltstack syscall support was added, where the return
value of restore_sigcontext() was changed to carry the memory-copying
failure code.
But instead of putting 'ax' into regs->ax directly, it was carried
in via a pointer and then returned, where the generic syscall return
code copied it to regs->ax.
So there was never any deeper reason for this suboptimal pattern, it
was simply never noticed after being introduced.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1428152303-17154-1-git-send-email-brgerst@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Quentin caught a corner case with the generation of instruction
padding in the ALTERNATIVE_2 macro: if len(orig_insn) <
len(alt1) < len(alt2), then not enough padding gets added and
that is not good(tm) as we could overwrite the beginning of the
next instruction.
Luckily, at the time of this writing, we don't have
ALTERNATIVE_2() invocations which have that problem and even if
we did, a simple fix would be to prepend the instructions with
enough prefixes so that that corner case doesn't happen.
However, best it would be if we fixed it properly. See below for
a simple, abstracted example of what we're doing.
So what we ended up doing is, we compute the
max(len(alt1), len(alt2)) - len(orig_insn)
and feed that value to the .skip gas directive. The max() cannot
have conditionals due to gas limitations, thus the fancy integer
math.
With this patch, all ALTERNATIVE_2 sites get padded correctly;
generating obscure test cases pass too:
#define alt_max_short(a, b) ((a) ^ (((a) ^ (b)) & -(-((a) < (b)))))
#define gen_skip(orig, alt1, alt2, marker) \
.skip -((alt_max_short(alt1, alt2) - (orig)) > 0) * \
(alt_max_short(alt1, alt2) - (orig)),marker
.pushsection .text, "ax"
.globl main
main:
gen_skip(1, 2, 4, 0x09)
gen_skip(4, 1, 2, 0x10)
...
.popsection
Thanks to Quentin for catching it and double-checking the fix!
Reported-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150404133443.GE21152@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 fixes from Ingo Molnar:
"Misc fixes: a SYSRET single-stepping fix, a dmi-scan robustization
fix, a reboot quirk and a kgdb fixlet"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kgdb/x86: Fix reporting of 'si' in kgdb on x86_64
x86/asm/entry/64: Disable opportunistic SYSRET if regs->flags has TF set
x86/reboot: Add ASRock Q1900DC-ITX mainboard reboot quirk
MAINTAINERS: Change the x86 microcode loader maintainer
firmware: dmi_scan: Prevent dmi_num integer overflow
Commit:
e2b32e6785 ("x86, kaslr: randomize module base load address")
made module base address randomization unconditional and didn't regard
disabled KKASLR due to CONFIG_HIBERNATION and command line option
"nokaslr". For more info see (now reverted) commit:
f47233c2d3 ("x86/mm/ASLR: Propagate base load address calculation")
In order to propagate KASLR status to kernel proper, we need a single bit
in boot_params.hdr.loadflags and we've chosen bit 1 thus leaving the
top-down allocated bits for bits supposed to be used by the bootloader.
Originally-From: Jiri Kosina <jkosina@suse.cz>
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Two static functions are only used if CONFIG_PCI is defined, so only
build them if this is the case. Fixes the build warnings:
arch/x86/kernel/early_printk.c:98:13: warning: ‘mem32_serial_out’ defined but not used [-Wunused-function]
static void mem32_serial_out(unsigned long addr, int offset, int value)
^
arch/x86/kernel/early_printk.c:105:21: warning: ‘mem32_serial_in’ defined but not used [-Wunused-function]
static unsigned int mem32_serial_in(unsigned long addr, int offset)
^
Also convert a few related instances of uintXX_t to kernel specific uXX
defines.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stuart.r.anderson@intel.com
Link: http://lkml.kernel.org/r/1427923924-22653-1-git-send-email-mark.einon@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dan reported compiler warnings about missing curly braces in
mce_severity_amd(). Reindent the catch-all "return MCE_AR_SEVERITY"
correctly to single tab.
While at it, chain ctx == IN_KERNEL check with mcgstatus check to make
it cleaner, as suggested by Boris.
No functional changes are introduced by this patch.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1427814281-18192-1-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
4214a16b02 ("x86/asm/entry/64/compat: Use SYSRETL to return from compat mode SYSENTER")
removed the last user of ENABLE_INTERRUPTS_SYSEXIT32. Kill the
macro now too.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: virtualization@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/1428049714-829-1-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
SYSEXIT is scary on 64-bit kernels -- SYSEXIT must be invoked
with usergs and IRQs on. That means that we rely on STI to
correctly mask interrupts for one instruction. This is okay by
itself, but the semantics with respect to NMIs are unclear.
Avoid the whole issue by using SYSRETL instead. For background,
Intel CPUs don't allow SYSCALL from compat mode, but they do
allow SYSRETL back to compat mode. Go figure.
To avoid doing too much at once, this doesn't revamp the calling
convention. We still return with EBP, EDX, and ECX on the user
stack.
Oddly this seems to be 30 cycles or so faster. Avoiding POPFQ
and STI will account for under half of that, I think, so my best
guess is that Intel just optimizes SYSRET much better than
SYSEXIT.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/57a0bf1b5230b2716a64ebe48e9bc1110f7ab433.1428019097.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Replace the clockevents_notify() call with an explicit function call.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/8569669.lgxIty9PKW@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Replace the clockevents_notify() call with an explicit function call.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1528188.S1pjqkSL1P@vostro.rjw.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We write a stack pointer to MSR_IA32_SYSENTER_ESP exactly once,
and we unnecessarily cache the value in tss.sp1. We never
read the cached value.
Remove all of the caching. It serves no purpose.
Suggested-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/05a0163eb33ef5208363f0015496855da7cebadd.1428002830.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
At Denys' request, clean up the comment describing stack padding
in the 32-bit sysenter path.
No code changes.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/41fee7bb8490ae840fe7ef2699f9c2feb932e729.1428002830.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add support for the new CLWB (cache line write back)
instruction. This instruction was announced in the document
"Intel Architecture Instruction Set Extensions Programming
Reference" with reference number 319433-022.
https://software.intel.com/sites/default/files/managed/0d/53/319433-022.pdf
The CLWB instruction is used to write back the contents of
dirtied cache lines to memory without evicting the cache lines
from the processor's cache hierarchy. This should be used in
favor of clflushopt or clflush in cases where you require the
cache line to be written to memory but plan to access the data
again in the near future.
One of the main use cases for this is with persistent memory
where CLWB can be used with PCOMMIT to ensure that data has been
accepted to memory and is durable on the DIMM.
This function shows how to properly use CLWB/CLFLUSHOPT/CLFLUSH
and PCOMMIT with appropriate fencing:
void flush_and_commit_buffer(void *vaddr, unsigned int size)
{
void *vend = vaddr + size - 1;
for (; vaddr < vend; vaddr += boot_cpu_data.x86_clflush_size)
clwb(vaddr);
/* Flush any possible final partial cacheline */
clwb(vend);
/*
* Use SFENCE to order CLWB/CLFLUSHOPT/CLFLUSH cache flushes.
* (MFENCE via mb() also works)
*/
wmb();
/* PCOMMIT and the required SFENCE for ordering */
pcommit_sfence();
}
After this function completes the data pointed to by vaddr is
has been accepted to memory and will be durable if the vaddr
points to persistent memory.
Regarding the details of how the alternatives assembly is set
up, we need one additional byte at the beginning of the CLFLUSH
so that we can flip it into a CLFLUSHOPT by changing that byte
into a 0x66 prefix. Two options are to either insert a 1 byte
ASM_NOP1, or to add a 1 byte NOP_DS_PREFIX. Both have no
functional effect with the plain CLFLUSH, but I've been told
that executing a CLFLUSH + prefix should be faster than
executing a CLFLUSH + NOP.
We had to hard code the assembly for CLWB because, lacking the
ability to assemble the CLWB instruction itself, the next
closest thing is to have an xsaveopt instruction with a 0x66
prefix. Unfortunately XSAVEOPT itself is also relatively new,
and isn't included by all the GCC versions that the kernel needs
to support.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1422377631-8986-3-git-send-email-ross.zwisler@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Fix two regressions in the balloon driver's use of memory hotplug
when used in a PV guest.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJVHWimAAoJEFxbo/MsZsTRSFkH/A1SYwcqUADPVZYDSc2T10Km
1kF7UifizlJ8/gCbEbhzLMDSPTwEENzN5ONWXQ+a3EXuK0UwLBnic9uKWAg2Q8cp
+uIpU1P15yM7rJFRaf6PZ2BqFdvWpXUJgNnof4+r0uqqa57hdmVOmVMKFenlf/h7
2jj0b19wS6jhuwl9PzgKTKQyjnpWrmkhfg5tDQzn1qUCHoKDIhM7ROUP7wsYfIu8
iAT3JV9lmNwdGT5jwf4MgRmBpqGZzQs03xaAz2E9/fnWWv7u4EuZcmbDcooUmi7H
luHQ2Dds1ajhjgtRwPoxT0tHFuRl7s0jsyJ8GOLsdmoMkJTAQnQA21egI7Bpdfo=
=HHbI
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-4.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen regression fixes from David Vrabel:
"Fix two regressions in the balloon driver's use of memory hotplug when
used in a PV guest"
* tag 'stable/for-linus-4.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: before adding hotplugged memory, set frames to invalid
x86/xen: prepare p2m list for memory hotplug
On a 32-bit build I got:
arch/x86/kernel/cpu/perf_event_intel_pt.c:413:5: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
arch/x86/kernel/cpu/perf_event_intel_bts.c:162:24: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
Fix it. The code should probably be (re-)tested on 32-bit systems to make
sure all is fine.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kaixu Xia <kaixu.xia@linaro.org>
Cc: linux-kernel@vger.kernel.org
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: kan.liang@intel.com
Cc: markus.t.metzger@intel.com
Cc: mathieu.poirier@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf with LBRs on has a tendency to rewrite the DEBUGCTL MSR with
the same value. Add a little optimization to skip the unnecessary
write.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1426871484-21285-2-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The perf PMI currently does unnecessary MSR accesses when
LBRs are enabled. We use LBR freezing, or when in callstack
mode force the LBRs to only filter on ring 3.
So there is no need to disable the LBRs explicitely in the
PMI handler.
Also we always unnecessarily rewrite LBR_SELECT in the LBR
handler, even though it can never change.
5) | /* write_msr: MSR_LBR_SELECT(1c8), value 0 */
5) | /* read_msr: MSR_IA32_DEBUGCTLMSR(1d9), value 1801 */
5) | /* write_msr: MSR_IA32_DEBUGCTLMSR(1d9), value 1801 */
5) | /* write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 70000000f */
5) | /* write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0 */
5) | /* write_msr: MSR_LBR_SELECT(1c8), value 0 */
5) | /* read_msr: MSR_IA32_DEBUGCTLMSR(1d9), value 1801 */
5) | /* write_msr: MSR_IA32_DEBUGCTLMSR(1d9), value 1801 */
This patch:
- Avoids disabling already frozen LBRs unnecessarily in the PMI
- Avoids changing LBR_SELECT in the PMI
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1426871484-21285-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Technically PEBS_ENABLED is only guaranteed to exist when we
detected PEBS. So add a check for this to the PMU dump function.
I don't think it can happen on a real CPU, but could in a VM.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1425059312-18217-4-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
LBRs and LBR freezing are controlled through the DEBUGCTL MSR. So
dump the state of DEBUGCTL too when dumping the PMU state.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1425059312-18217-3-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The PMU reset code didn't quite keep up with newer PMU features.
Improve it a bit to really reset a modern PMU:
- Clear all overflow status
- Clear LBRs and freezing state
- Disable fixed counters too
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1425059312-18217-2-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch disables the PMU HT bug when Hyperthreading (HT)
is disabled. We cannot do this test immediately when perf_events
is initialized. We need to wait until the topology information
is setup properly. As such, we register a later initcall, check
the topology and potentially disable the workaround. To do this,
we need to ensure there is no user of the PMU. At this point of
the boot, the only user is the NMI watchdog, thus we disable
it during the switch and re-enable it right after.
Having the workaround disabled when it is not needed provides
some benefits by limiting the overhead is time and space.
The workaround still ensures correct scheduling of the corrupting
memory events (0xd0, 0xd1, 0xd2) when HT is off. Those events
can only be measured on counters 0-3. Something else the current
kernel did not handle correctly.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: bp@alien8.de
Cc: jolsa@redhat.com
Cc: kan.liang@intel.com
Cc: maria.n.dimakopoulou@gmail.com
Link: http://lkml.kernel.org/r/1416251225-17721-13-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch limits the number of counters available to each CPU when
the HT bug workaround is enabled.
This is necessary to avoid situation of counter starvation. Such can
arise from configuration where one HT thread, HT0, is using all 4 counters
with corrupting events which require exclusion the the sibling HT, HT1.
In such case, HT1 would not be able to schedule any event until HT0
is done. To mitigate this problem, this patch artificially limits
the number of counters to 2.
That way, we can gurantee that at least 2 counters are not in exclusive
mode and therefore allow the sibling thread to schedule events of the
same type (system vs. per-thread). The 2 counters are not determined
in advance. We simply set the limit to two events per HT.
This helps mitigate starvation in case of events with specific counter
constraints such a PREC_DIST.
Note that this does not elimintate the starvation is all cases. But
it is better than not having it.
(Solution suggested by Peter Zjilstra.)
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: bp@alien8.de
Cc: jolsa@redhat.com
Cc: kan.liang@intel.com
Cc: maria.n.dimakopoulou@gmail.com
Link: http://lkml.kernel.org/r/1416251225-17721-11-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patches activates the HT bug workaround for the
SNB/IVB/HSW processors. This covers non-PEBS mode.
Activation is done thru the constraint tables.
Both client and server processors needs this workaround.
Signed-off-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: bp@alien8.de
Cc: jolsa@redhat.com
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/1416251225-17721-8-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch implements a software workaround for a HW erratum
on Intel SandyBridge, IvyBridge and Haswell processors
with Hyperthreading enabled. The errata are documented for
each processor in their respective specification update
documents:
- SandyBridge: BJ122
- IvyBridge: BV98
- Haswell: HSD29
The bug causes silent counter corruption across hyperthreads only
when measuring certain memory events (0xd0, 0xd1, 0xd2, 0xd3).
Counters measuring those events may leak counts to the sibling
counter. For instance, counter 0, thread 0 measuring event 0xd0,
may leak to counter 0, thread 1, regardless of the event measured
there. The size of the leak is not predictible. It all depends on
the workload and the state of each sibling hyper-thread. The
corrupting events do undercount as a consequence of the leak. The
leak is compensated automatically only when the sibling counter measures
the exact same corrupting event AND the workload is on the two threads
is the same. Given, there is no way to guarantee this, a work-around
is necessary. Furthermore, there is a serious problem if the leaked count
is added to a low-occurrence event. In that case the corruption on
the low occurrence event can be very large, e.g., orders of magnitude.
There is no HW or FW workaround for this problem.
The bug is very easy to reproduce on a loaded system.
Here is an example on a Haswell client, where CPU0, CPU4
are siblings. We load the CPUs with a simple triad app
streaming large floating-point vector. We use 0x81d0
corrupting event (MEM_UOPS_RETIRED:ALL_LOADS) and
0x20cc (ROB_MISC_EVENTS:LBR_INSERTS). Given we are not
using the LBR, the 0x20cc event should be zero.
$ taskset -c 0 triad &
$ taskset -c 4 triad &
$ perf stat -a -C 0 -e r81d0 sleep 100 &
$ perf stat -a -C 4 -r20cc sleep 10
Performance counter stats for 'system wide':
139 277 291 r20cc
10,000969126 seconds time elapsed
In this example, 0x81d0 and r20cc ar eusing sinling counters
on CPU0 and CPU4. 0x81d0 leaks into 0x20cc and corrupts it
from 0 to 139 millions occurrences.
This patch provides a software workaround to this problem by modifying the
way events are scheduled onto counters by the kernel. The patch forces
cross-thread mutual exclusion between counters in case a corrupting event
is measured by one of the hyper-threads. If thread 0, counter 0 is measuring
event 0xd0, then nothing can be measured on counter 0, thread 1. If no corrupting
event is measured on any hyper-thread, event scheduling proceeds as before.
The same example run with the workaround enabled, yield the correct answer:
$ taskset -c 0 triad &
$ taskset -c 4 triad &
$ perf stat -a -C 0 -e r81d0 sleep 100 &
$ perf stat -a -C 4 -r20cc sleep 10
Performance counter stats for 'system wide':
0 r20cc
10,000969126 seconds time elapsed
The patch does provide correctness for all non-corrupting events. It does not
"repatriate" the leaked counts back to the leaking counter. This is planned
for a second patch series. This patch series makes this repatriation more
easy by guaranteeing the sibling counter is not measuring any useful event.
The patch introduces dynamic constraints for events. That means that events which
did not have constraints, i.e., could be measured on any counters, may now be
constrained to a subset of the counters depending on what is going on the sibling
thread. The algorithm is similar to a cache coherency protocol. We call it XSU
in reference to Exclusive, Shared, Unused, the 3 possible states of a PMU
counter.
As a consequence of the workaround, users may see an increased amount of event
multiplexing, even in situtations where there are fewer events than counters
measured on a CPU.
Patch has been tested on all three impacted processors. Note that when
HT is off, there is no corruption. However, the workaround is still enabled,
yet not costing too much. Adding a dynamic detection of HT on turned out to
be complex are requiring too much to code to be justified.
This patch addresses the issue when PEBS is not used. A subsequent patch
fixes the problem when PEBS is used.
Signed-off-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
[spinlock_t -> raw_spinlock_t]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: bp@alien8.de
Cc: jolsa@redhat.com
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/1416251225-17721-7-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds a new shared_regs style structure to the
per-cpu x86 state (cpuc). It is used to coordinate access
between counters which must be used with exclusion across
HyperThreads on Intel processors. This new struct is not
needed on each PMU, thus is is allocated on demand.
Signed-off-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
[peterz: spinlock_t -> raw_spinlock_t]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: bp@alien8.de
Cc: jolsa@redhat.com
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/1416251225-17721-6-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds an index parameter to the get_event_constraint()
x86_pmu callback. It is expected to represent the index of the
event in the cpuc->event_list[] array. When the callback is used
for fake_cpuc (evnet validation), then the index must be -1. The
motivation for passing the index is to use it to index into another
cpuc array.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: bp@alien8.de
Cc: jolsa@redhat.com
Cc: kan.liang@intel.com
Cc: maria.n.dimakopoulou@gmail.com
Link: http://lkml.kernel.org/r/1416251225-17721-5-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds 3 new PMU model specific callbacks
during the event scheduling done by x86_schedule_events().
->start_scheduling(): invoked when entering the schedule routine.
->stop_scheduling(): invoked at the end of the schedule routine
->commit_scheduling(): invoked for each committed event
To be used optionally by model-specific code.
Signed-off-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: bp@alien8.de
Cc: jolsa@redhat.com
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/1416251225-17721-4-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make the cpuc->kfree_on_online a vector to accommodate
more than one entry and add the second entry to be
used by a later patch.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Cc: bp@alien8.de
Cc: jolsa@redhat.com
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/1416251225-17721-3-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add support for Branch Trace Store (BTS) via kernel perf event infrastructure.
The difference with the existing implementation of BTS support is that this
one is a separate PMU that exports events' trace buffers to userspace by means
of AUX area of the perf buffer, which is zero-copy mapped into userspace.
The immediate benefit is that the buffer size can be much bigger, resulting in
fewer interrupts and no kernel side copying is involved and little to no trace
data loss. Also, kernel code can be traced with this driver.
The old way of collecting BTS traces still works.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kaixu Xia <kaixu.xia@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: kan.liang@intel.com
Cc: markus.t.metzger@intel.com
Cc: mathieu.poirier@linaro.org
Link: http://lkml.kernel.org/r/1422614435-114702-1-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add support for Intel Processor Trace (PT) to kernel's perf events.
PT is an extension of Intel Architecture that collects information about
software execuction such as control flow, execution modes and timings and
formats it into highly compressed binary packets. Even being compressed,
these packets are generated at hundreds of megabytes per second per core,
which makes it impractical to decode them on the fly in the kernel.
This driver exports trace data by through AUX space in the perf ring
buffer, which is zero-copy mapped into userspace for faster data retrieval.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kaixu Xia <kaixu.xia@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: kan.liang@intel.com
Cc: markus.t.metzger@intel.com
Cc: mathieu.poirier@linaro.org
Link: http://lkml.kernel.org/r/1422614392-114498-1-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Intel PT cannot be used at the same time as LBR or BTS and will cause a
general protection fault if they are used together. In order to avoid
fixing up GPs in the fast path, instead we disallow creating LBR/BTS
events when PT events are present and vice versa.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kaixu Xia <kaixu.xia@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: kan.liang@intel.com
Cc: markus.t.metzger@intel.com
Cc: mathieu.poirier@linaro.org
Link: http://lkml.kernel.org/r/1421237903-181015-12-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some of the CYCLE_ACTIVITY.* events can only be scheduled on
counter 2. Due to a typo Haswell matched those with
INTEL_EVENT_CONSTRAINT, which lead to the events never
matching as the comparison does not expect anything
in the umask too. Fix the typo.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1425925222-32361-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For supporting Intel LBR branches filtering, Intel LBR sharing logic
mechanism is introduced from commit b36817e886 ("perf/x86: Add Intel
LBR sharing logic"). It modifies __intel_shared_reg_get_constraints() to
config lbr_sel, which is finally used to set LBR_SELECT.
However, the intel_shared_regs_constraints() function is called after
intel_pebs_constraints(). The PEBS event will return immediately after
intel_pebs_constraints(). So it's impossible to filter branches for PEBS
events.
This patch moves intel_shared_regs_constraints() ahead of
intel_pebs_constraints().
We can safely do that because the intel_shared_regs_constraints() function
only returns empty constraint if its rejecting the event, otherwise it
returns NULL such that we continue calling intel_pebs_constraints() and
x86_get_event_constraint().
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1427467105-9260-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Prior to this commit, it was impossible to use relative path to
include Makefiles from the top level Makefile because the option
"--include-dir=$(srctree)" becomes effective when Make enters into
sub Makefiles.
To use relative path in any places, this commit moves the option
above the "sub-make" target.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Some of x86 bare-metal and Xen CPU initialization code is common
between the two and therefore can be factored out to avoid code
duplication.
As a side effect, doing so will also extend the fix provided by
commit a7fcf28d43 ("x86/asm/entry: Replace this_cpu_sp0() with
current_top_of_stack() to x86_32") to 32-bit Xen PV guests.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: konrad.wilk@oracle.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1427897534-5086-1-git-send-email-boris.ostrovsky@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch fixes an error in kgdb for x86_64 which would report
the value of dx when asked to give the value of si.
Signed-off-by: Steffen Liebergeld <steffen.liebergeld@kernkonzept.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When I wrote the opportunistic SYSRET code, I missed an important difference
between SYSRET and IRET.
Both instructions are capable of setting EFLAGS.TF, but they behave differently
when doing so:
- IRET will not issue a #DB trap after execution when it sets TF.
This is critical -- otherwise you'd never be able to make forward progress when
returning to userspace.
- SYSRET, on the other hand, will trap with #DB immediately after
returning to CPL3, and the next instruction will never execute.
This breaks anything that opportunistically SYSRETs to a user
context with TF set. For example, running this code with TF set
and a SIGTRAP handler loaded never gets past 'post_nop':
extern unsigned char post_nop[];
asm volatile ("pushfq\n\t"
"popq %%r11\n\t"
"nop\n\t"
"post_nop:"
: : "c" (post_nop) : "r11");
In my defense, I can't find this documented in the AMD or Intel manual.
Fix it by using IRET to restore TF.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2a23c6b8a9 ("x86_64, entry: Use sysret to return to userspace when possible")
Link: http://lkml.kernel.org/r/9472f1ca4c19a38ecda45bba9c91b7168135fcfa.1427923514.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Various recent BIOSes support NVDIMMs or ADR using a
non-standard e820 memory type, and Intel supplied reference
Linux code using this type to various vendors.
Wire this e820 table type up to export platform devices for the
pmem driver so that we can use it in Linux.
Based on earlier work from:
Dave Jiang <dave.jiang@intel.com>
Dan Williams <dan.j.williams@intel.com>
Includes fixes for NUMA regions from Boaz Harrosh.
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-nvdimm@ml01.01.org
Link: http://lkml.kernel.org/r/1427872339-6688-2-git-send-email-hch@lst.de
[ Minor cleanups. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
* A new efi=debug command line option that enables debug output in the
EFI boot stub and results in less verbose EFI memory map output by
default - Borislav Petkov
* Disable interrupts around EFI calls and use a more standard page
table saving and restoring idiom when making EFI calls - Ingo Molnar
* Reduce the number of memory allocations performed when allocating the
FDT in EFI boot stub by retrieving size from the FDT header in the
EFI config table - Ard Biesheuvel
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=eapi
-----END PGP SIGNATURE-----
Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into core/efi
Pull EFI updates from Matt Fleming:
- Fixes and cleanups for SMBIOS 3.0 DMI code. (Ivan Khoronzhuk)
- A new efi=debug command line option that enables debug output in the
EFI boot stub and results in less verbose EFI memory map output by
default. (Borislav Petkov)
- Disable interrupts around EFI calls and use a more standard page
table saving and restoring idiom when making EFI calls. (Ingo Molnar)
- Reduce the number of memory allocations performed when allocating the
FDT in EFI boot stub by retrieving size from the FDT header in the
EFI config table. (Ard Biesheuvel)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Xen calls on every cpu into tick_resume() which is just wrong.
tick_resume() is for the syscore global suspend/resume
invocation. What XEN really wants is a per cpu local resume
function.
Provide a tick_resume_local() function and use it in XEN.
Also provide a complementary tick_suspend_local() and modify
tick_unfreeze() and tick_freeze(), respectively, to use the
new local tick resume/suspend functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ Combined two patches, rebased, modified subject/changelog. ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1698741.eezk9tnXtG@vostro.rjw.lan
[ Merged to latest timers/core. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
clockevents_notify() is a leftover from the early design of the
clockevents facility. It's really not a notification mechanism,
it's a multiplex call.
We are way better off to have explicit calls instead of this
monstrosity. Split out the suspend/resume() calls and invoke
them directly from the call sites.
No locking required at this point because these calls happen
with interrupts disabled and a single cpu online.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ Rebased on top of 4.0-rc5. ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/713674030.jVm1qaHuPf@vostro.rjw.lan
[ Rebased on top of latest timers/core. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The ASRock Q1900DC-ITX mainboard (Baytrail-D) hangs randomly in
both BIOS and UEFI mode while rebooting unless reboot=pci is
used. Add a quirk to reboot via the pci method.
The problem is very intermittent and hard to debug, it might succeed
rebooting just fine 40 times in a row - but fails half a dozen times
the next day. It seems to be slightly less common in BIOS CSM mode
than native UEFI (with the CSM disabled), but it does happen in either
mode. Since I've started testing this patch in late january, rebooting
has been 100% reliable.
Most of the time it already hangs during POST, but occasionally it
might even make it through the bootloader and the kernel might even
start booting, but then hangs before the mode switch. The same symptoms
occur with grub-efi, gummiboot and grub-pc, just as well as (at least)
kernel 3.16-3.19 and 4.0-rc6 (I haven't tried older kernels than 3.16).
Upgrading to the most current mainboard firmware of the ASRock
Q1900DC-ITX, version 1.20, does not improve the situation.
( Searching the web seems to suggest that other Bay Trail-D mainboards
might be affected as well. )
--
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: <stable@vger.kernel.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/20150330224427.0fb58e42@mir
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently x86-64 efi_call_phys_prolog() saves into a global variable (save_pgd),
and efi_call_phys_epilog() restores the kernel pagetables from that global
variable.
Change this to a cleaner save/restore pattern where the saving function returns
the saved object and the restore function restores that.
Apply the same concept to the 32-bit code as well.
Plus this approach, as an added bonus, allows us to express the
!efi_enabled(EFI_OLD_MEMMAP) situation in a clean fashion as well,
via a 'NULL' return value.
Cc: Tapasweni Pathak <tapaswenipathak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Tapasweni Pathak reported that we do a kmalloc() in efi_call_phys_prolog()
on x86-64 while having interrupts disabled, which is a big no-no, as
kmalloc() can sleep.
Solve this by removing the irq disabling from the prolog/epilog calls
around EFI calls: it's unnecessary, as in this stage we are single
threaded in the boot thread, and we don't ever execute this from
interrupt contexts.
Reported-by: Tapasweni Pathak <tapaswenipathak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
... and hide the memory regions dump behind it. Make it default-off.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20141209095843.GA3990@pd.tnic
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Logically, we just want to jump around the following instruction
and its prologue/epilogue:
call *sys_call_table(,%rax,8)
if the syscall number is too big - we do not specifically target
the "int_ret_from_sys_call" label.
Use a local, numerical label for this jump, for more clarity.
This also makes the code smaller:
-ffffffff8187756b: 0f 87 0f 00 00 00 ja ffffffff81877580 <int_ret_from_sys_call>
+ffffffff8187756b: 77 0f ja ffffffff8187757c <int_ret_from_sys_call>
because jumps to global labels are never translated to short jump
instructions by GAS.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427821211-25099-9-git-send-email-dvlasenk@redhat.com
[ Improved the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is no reason to use MOVQ to load a non-negative immediate
constant value into a 64-bit register. MOVL does the same, since
the upper 32 bits are zero-extended by the CPU.
This makes the code a bit smaller, while leaving functionality
unchanged.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427821211-25099-8-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
At the 'exit_intr' label we test whether interrupt/exception was in
kernel. If it did, we jump to the preemption check. If preemption
does happen (IOW if we call preempt_schedule_irq()), we go back to
'exit_intr'.
But it's pointless, we already know that the test succeeded last
time, preemption doesn't change the fact that interrupt/exception
was in the kernel.
We can go back directly to checking PER_CPU_VAR(__preempt_count) instead.
This makes the 'exit_intr' label unused, drop it.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427821211-25099-5-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Get rid of #define obfuscation of retint_kernel in
CONFIG_PREEMPT case by defining retint_kernel label always, not
only for CONFIG_PREEMPT.
Strip retint_kernel of .global-ness (ENTRY macro) - it has no
users outside of this file.
This looks like cosmetics, but it is not:
"je LABEL" can be optimized to short jump by assember
only if LABEL is not global, for global labels jump is always
a near one with relocation.
Convert retint_restore_args to a local numeric label, making it
clearer that it is not used elsewhere in the file.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427821211-25099-3-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This mimics the recent similar 64-bit change.
Saves ~110 bytes of code.
Patch was run-tested on 32 and 64 bits, Intel and AMD CPU.
I also looked at the diff of entry_64.o disassembly, to have
a different view of the changes.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427821211-25099-2-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
SYSRET code path has a small irq-off block.
On this code path, TRACE_IRQS_ON can't be called right before
interrupts are enabled for real, we can't clobber registers
there. So current code does it earlier, in a safe place.
But with this, TRACE_IRQS_OFF/ON frames just two fast
instructions, which is ridiculous: now most of irq-off block is
_outside_ of the framing.
Do the same thing that we do on SYSCALL entry: do not track this
irq-off block, it is very small to ever cause noticeable irq
latency.
Be careful: make sure that "jnz int_ret_from_sys_call_irqs_off"
now does invoke TRACE_IRQS_OFF - move
int_ret_from_sys_call_irqs_off label before TRACE_IRQS_OFF.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427821211-25099-1-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
__verify_local_APIC() is detritus from the early APIC days.
Its return value isn't used anywhere and the information it
prints when debug is enabled is already part of APIC
initialization messages printed to syslog. Off with it!
Signed-off-by: Bandan Das <bsd@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/jpgy4mcsxsq.fsf@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use the normal return values for bool functions
Signed-off-by: Joe Perches <joe@perches.com>
Message-Id: <9f593eb2f43b456851cd73f7ed09654ca58fb570.1427759009.git.joe@perches.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Flag all Multi buffer SHA1 helper ciphers as internal ciphers
to prevent them from being called by normal users.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Flag all Twofish AVX helper ciphers as internal ciphers to prevent
them from being called by normal users.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Flag all Serpent SSE2 helper ciphers as internal ciphers to prevent
them from being called by normal users.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Flag all Serpent AVX helper ciphers as internal ciphers to prevent
them from being called by normal users.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Flag all Serpent AVX2 helper ciphers as internal ciphers to prevent
them from being called by normal users.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Flag all CAST6 helper ciphers as internal ciphers to prevent them
from being called by normal users.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Flag all AVX Camellia helper ciphers as internal ciphers to prevent
them from being called by normal users.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Flag all CAST5 helper ciphers as internal ciphers to prevent them
from being called by normal users.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Flag all AES-NI Camellia helper ciphers as internal ciphers to
prevent them from being called by normal users.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Flag all ash clmulni helper ciphers as internal ciphers to prevent them
from being called by normal users.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Flag all AES-NI helper ciphers as internal ciphers to prevent them from
being called by normal users.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
user_mode_ignore_vm86() can be used instead of user_mode(), in
places where we have already done a v8086_mode() security
check of ptregs.
But doing this check in the wrong place would be a bug that
could result in security problems, and also the naming still
isn't very clear.
Furthermore, it only affects 32-bit kernels, while most
development happens on 64-bit kernels.
If we replace them with user_mode() checks then the cost is only
a very minor increase in various slowpaths:
text data bss dec hex filename
10573391 703562 1753042 13029995 c6d26b vmlinux.o.before
10573423 703562 1753042 13030027 c6d28b vmlinux.o.after
So lets get rid of this distinction once and for all.
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150329090233.GA1963@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The existing clean-files rule was missing vdsox32.so and
vdsox32.so.dbg. We should really rename the intermediates to
allow a single rule to get them all.
Also-reported-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Link: http://lkml.kernel.org/r/7fa2ad4a63bc6f52e214125900d54165ef06cc10.1427482099.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After 'make clean' the following files were left in arch/x86/vdso/:
vdso-image-32-int80.c
vdso-image-32-syscall.c
vdso-image-32-sysenter.c
These file are generated during the build process and are present
in .gitignore, so remove them.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Link: http://lkml.kernel.org/r/f85bb7ef6f8c6f6aa4bf422348018c84321454f8.1427482099.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This vDSO code only gets used by 64-bit kernels, not 32-bit ones.
On 64-bit kernels, the data segment is the same for 32-bit and
64-bit userspace, and the SYSRET instruction loads %ss with its
selector.
So there's no need to repeat it by hand. Segment loads are somewhat
expensive: tens of cycles.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
[ Removed unnecessary comment. ]
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/63da6d778f69fd0f1345d9287f6764d58be519fa.1427482099.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The ASLR implementation needs to special-case AMD F15h processors by
clearing out bits [14:12] of the virtual address in order to avoid I$
cross invalidations and thus performance penalty for certain workloads.
For details, see:
dfb09f9b7a ("x86, amd: Avoid cache aliasing penalties on AMD family 15h")
This special case reduces the mmapped file's entropy by 3 bits.
The following output is the run on an AMD Opteron 62xx class CPU
processor under x86_64 Linux 4.0.0:
$ for i in `seq 1 10`; do cat /proc/self/maps | grep "r-xp.*libc" ; done
b7588000-b7736000 r-xp 00000000 00:01 4924 /lib/i386-linux-gnu/libc.so.6
b7570000-b771e000 r-xp 00000000 00:01 4924 /lib/i386-linux-gnu/libc.so.6
b75d0000-b777e000 r-xp 00000000 00:01 4924 /lib/i386-linux-gnu/libc.so.6
b75b0000-b775e000 r-xp 00000000 00:01 4924 /lib/i386-linux-gnu/libc.so.6
b7578000-b7726000 r-xp 00000000 00:01 4924 /lib/i386-linux-gnu/libc.so.6
...
Bits [12:14] are always 0, i.e. the address always ends in 0x8000 or
0x0000.
32-bit systems, as in the example above, are especially sensitive
to this issue because 32-bit randomness for VA space is 8 bits (see
mmap_rnd()). With the Bulldozer special case, this diminishes to only 32
different slots of mmap virtual addresses.
This patch randomizes per boot the three affected bits rather than
setting them to zero. Since all the shared pages have the same value
at bits [12..14], there is no cache aliasing problems. This value gets
generated during system boot and it is thus not known to a potential
remote attacker. Therefore, the impact from the Bulldozer workaround
gets diminished and ASLR randomness increased.
More details at:
http://hmarco.org/bugs/AMD-Bulldozer-linux-ASLR-weakness-reducing-mmaped-files-by-eight.html
Original white paper by AMD dealing with the issue:
http://developer.amd.com/wordpress/media/2012/10/SharedL1InstructionCacheonAMD15hCPU.pdf
Mentored-by: Ismael Ripoll <iripoll@disca.upv.es>
Signed-off-by: Hector Marco-Gisbert <hecmargi@upv.es>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jan-Simon <dl9pf@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-fsdevel@vger.kernel.org
Link: http://lkml.kernel.org/r/1427456301-3764-1-git-send-email-hecmargi@upv.es
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This file doesn't use any macros from pci_ids.h anymore, drop the include.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andreas Herrmann <herrmann.der.user@googlemail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1427635734-24786-80-git-send-email-mst@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
At exit_intr, we GET_THREAD_INFO(%rcx) and then jump to
retint_kernel if saved CS was from kernel. But the code at
retint_kernel doesn't need %rcx.
Move GET_THREAD_INFO(%rcx) down, after CS check and branch.
While at it, remove "has a correct top of stack" comment.
After recent changes which eliminated FIXUP_TOP_OF_STACK,
we always have a correct pt_regs layout.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427738975-7391-5-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The "retint_kernel" code block is misplaced. Since its logical
continuation is "retint_restore_args", it is more natural to
place it above that label. This also makes two jumps "short".
This change only moves code block around, without changing
logic.
This enables the next simplification: making
"retint_restore_args" label a local numeric one.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427738975-7391-2-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A trivial code cleanup. This `if` is redundant.
Signed-off-by: Eugene Korenevsky <ekorenevsky@gmail.com>
Message-Id: <20150328222717.GA6508@gnote>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some constants are redfined in emulate.c. Avoid it.
s/SELECTOR_RPL_MASK/SEGMENT_RPL_MASK
s/SELECTOR_TI_MASK/SEGMENT_TI_MASK
No functional change.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Message-Id: <1427635984-8113-3-git-send-email-namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The eflags are redefined (using other defines) in emulate.c.
Use the definition from processor-flags.h as some mess already started.
No functional change.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Message-Id: <1427635984-8113-2-git-send-email-namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the source of BSF and BSR is zero, the destination register should not
change. That is how real hardware behaves. If we set the destination even with
the same value that we had before, we may clear bits [63:32] unnecassarily.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Message-Id: <1427719163-5429-4-git-send-email-namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
POPA should assign the values to the registers as usual registers are assigned.
In other words, 32-bits register assignments should clear bits [63:32] of the
register.
Split the code of register assignments that will be used by future changes as
well.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Message-Id: <1427719163-5429-3-git-send-email-namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On legacy mode CMOV emulation should still clear bits [63:32] even if the
assignment is not done. The previous fix 140bad89fd ("KVM: x86: emulation of
dword cmov on long-mode should clear [63:32]") was incomplete.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Message-Id: <1427719163-5429-2-git-send-email-namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If data is read from PIC with invalid access size, the return data stays
uninitialized even though success is returned.
Fix this by always initializing the data.
Signed-off-by: Petr Matousek <pmatouse@redhat.com>
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Message-Id: <20150311111609.GG8544@dhcp-25-225.brq.redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull x86 fix from Ingo Molnar:
"Fix x86 syscall exit code bug that resulted in spurious non-execution
of TIF-driven user-return worklets, causing big trouble for things
like KVM that rely on user notifiers for correctness of their vcpu
model, causing crashes like double faults"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/entry: Check for syscall exit work with IRQs disabled
There are a couple of syscall argument zero-extension instructions in
the 32-bit compat entry code, and it was mentioned that people keep
trying to optimize them out, introducing bugs.
Make them more visible, and add a "do not remove" comment.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427452582-21624-3-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The existing comment has proven to be not very clear.
Replace it with a comment similar to the one we now have in the 64-bit
syscall entry point. (Three instances, one per 32-bit syscall entry).
In the INT80 entry point's CFI annotations, replace mysterious
expressions with numric constants. In this case, raw numbers
look more understandable.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427452582-21624-2-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The comment is ancient, it dates to the time when only AMD's
x86_64 implementation existed. AMD wasn't (and still isn't)
supporting SYSENTER, so these writes were "just in case" back
then.
This has changed: Intel's x86_64 appeared, and Intel does
support SYSENTER in long mode. "Some future 64-bit CPU" is here
already.
The code may appear "buggy" for AMD as it stands, since
MSR_IA32_SYSENTER_EIP is only 32-bit for AMD CPUs. Writing a
kernel function's address to it would drop high bits. Subsequent
use of this MSR for branch via SYSENTER seem to allow user to
transition to CPL0 while executing his code. Scary, eh?
Explain why that is not a bug: because SYSENTER insn would not
work on AMD CPU.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427453956-21931-1-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While thinking on the whole clock discussion it occurred to me we have
two distinct uses of time:
1) the tracking of event/ctx/cgroup enabled/running/stopped times
which includes the self-monitoring support in struct
perf_event_mmap_page.
2) the actual timestamps visible in the data records.
And we've been conflating them.
The first is all about tracking time deltas, nobody should really care
in what time base that happens, its all relative information, as long
as its internally consistent it works.
The second however is what people are worried about when having to
merge their data with external sources. And here we have the
discussion on MONOTONIC vs MONOTONIC_RAW etc..
Where MONOTONIC is good for correlating between machines (static
offset), MONOTNIC_RAW is required for correlating against a fixed rate
hardware clock.
This means configurability; now 1) makes that hard because it needs to
be internally consistent across groups of unrelated events; which is
why we had to have a global perf_clock().
However, for 2) it doesn't really matter, perf itself doesn't care
what it writes into the buffer.
The below patch makes the distinction between these two cases by
adding perf_event_clock() which is used for the second case. It
further makes this configurable on a per-event basis, but adds a few
sanity checks such that we cannot combine events with different clocks
in confusing ways.
And since we then have per-event configurability we might as well
retain the 'legacy' behaviour as a default.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
An upcoming patch will depend on tai_ns() and NMI-safe ktime_get_raw_fast(),
so merge timers/core here in a separate topic branch until it's all cooked
and timers/core is merged upstream.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull RCU updates from Paul E. McKenney:
- Documentation updates.
- Changes permitting use of call_rcu() and friends very early in
boot, for example, before rcu_init() is invoked.
- Miscellaneous fixes.
- Add in-kernel API to enable and disable expediting of normal RCU
grace periods.
- Improve RCU's handling of (hotplug-) outgoing CPUs.
Note: ARM support is lagging a bit here, and these improved
diagnostics might generate (harmless) splats.
- NO_HZ_FULL_SYSIDLE fixes.
- Tiny RCU updates to make it more tiny.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Internally, lockdep_sys_exit_thunk saves callee-clobbered
registers, and calls a C function, lockdep_sys_exit. Thus,
callee-preserved registers won't be mangled, there is no need to
save them.
Patch was run-tested.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427314468-12763-4-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is no need to have an extra level of macro indirection
here.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427314468-12763-3-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This change simply moves defines around (even if it's not
obvious in a patch form). Nothing is changed.
This is a preparation for folding ARCH_LOCKDEP_SYS_EXIT defines
into their users.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427314468-12763-2-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A named label "ret_from_sys_call" implies that there are jumps
to this location from elsewhere, as happens with many other
labels in this file.
But this label is used only by the JMP a few insns above.
To make that obvious, use local numeric label instead.
Improve comments:
"and return regs->ax" isn't too informative. We always return
regs->ax.
The comment suggesting that it'd be cool to use rip relative
addressing for CALL is deleted. It's unclear why that would be
an improvement - we aren't striving to use position-independent
code here. PIC code here would require something like LEA
sys_call_table(%rip),reg + CALL *(reg,%rax*8)...
"iret frame is also incomplete" is no longer true, fix that too.
Also fix typo in comment.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427303896-24023-1-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf_pmu_disable() is called before pmu->add() and perf_pmu_enable() is called
afterwards. No need to call these inside of x86_pmu_add() as well.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1424281543-67335-1-git-send-email-dsahern@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In preparation of adding another tkr field, rename this one to
tkr_mono. Also rename tk_read_base::base_mono to tk_read_base::base,
since the structure is not specific to CLOCK_MONOTONIC and the mono
name got added to the tk_read_base instance.
Lots of trivial churn.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150319093400.344679419@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On Broadwell INST_RETIRED.ALL cannot be used with any period
that doesn't have the lowest 6 bits cleared. And the period
should not be smaller than 128.
This is erratum BDM11 and BDM55:
http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/5th-gen-core-family-spec-update.pdf
BDM11: When using a period < 100; we may get incorrect PEBS/PMI
interrupts and/or an invalid counter state.
BDM55: When bit0-5 of the period are !0 we may get redundant PEBS
records on overflow.
Add a new callback to enforce this, and set it for Broadwell.
How does this handle the case when an app requests a specific
period with some of the bottom bits set?
Short answer:
Any useful instruction sampling period needs to be 4-6 orders
of magnitude larger than 128, as an PMI every 128 instructions
would instantly overwhelm the system and be throttled.
So the +-64 error from this is really small compared to the
period, much smaller than normal system jitter.
Long answer (by Peterz):
IFF we guarantee perf_event_attr::sample_period >= 128.
Suppose we start out with sample_period=192; then we'll set period_left
to 192, we'll end up with left = 128 (we truncate the lower bits). We
get an interrupt, find that period_left = 64 (>0 so we return 0 and
don't get an overflow handler), up that to 128. Then we trigger again,
at n=256. Then we find period_left = -64 (<=0 so we return 1 and do get
an overflow). We increment with sample_period so we get left = 128. We
fire again, at n=384, period_left = 0 (<=0 so we return 1 and get an
overflow). And on and on.
So while the individual interrupts are 'wrong' we get then with
interval=256,128 in exactly the right ratio to average out at 192. And
this works for everything >=128.
So the num_samples*fixed_period thing is still entirely correct +- 127,
which is good enough I'd say, as you already have that error anyhow.
So no need to 'fix' the tools, al we need to do is refuse to create
INST_RETIRED:ALL events with sample_period < 128.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
[ Updated comments and changelog a bit. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1424225886-18652-3-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add Broadwell support for Broadwell to perf.
The basic support is very similar to Haswell. We use the new cache
event list added for Haswell earlier. The only differences
are a few bits related to remote nodes. To avoid an extra,
mostly identical, table these are patched up in the initialization code.
The constraint list has one new event that needs to be handled over Haswell.
Includes code and testing from Kan Liang.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1424225886-18652-2-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Haswell offcore events are quite different from Sandy Bridge.
Add a new table to handle Haswell properly.
Note that the offcore bits listed in the SDM are not quite correct
(this is currently being fixed). An uptodate list of bits is
in the patch.
The basic setup is similar to Sandy Bridge. The prefetch columns
have been removed, as prefetch counting is not very reliable
on Haswell. One L1 event that is not in the event list anymore
has been also removed.
- data reads do not include code reads (comparable to earlier Sandy Bridge tables)
- data counts include speculative execution (except L1 write, dtlb, bpu)
- remote node access includes both remote memory, remote cache, remote mmio.
- prefetches are not included in the counts for consistency
(different from Sandy Bridge, which includes prefetches in the remote node)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
[ Removed the HSM30 comments; we don't have them for SNB/IVB either. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1424225886-18652-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If the guest CPU is supposed to support rdtscp and the host has rdtscp
enabled in the secondary execution controls, we can also expose this
feature to L1. Just extend nested_vmx_exit_handled to properly route
EXIT_REASON_RDTSCP.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
virt/kvm was never really a good include directory for anything else
than locally included headers.
With the move of iodev.h there is no need anymore to add this
directory the compiler's include path, so remove it from the x86 kvm
Makefile.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
iodev.h contains definitions for the kvm_io_bus framework. This is
needed both by the generic KVM code in virt/kvm as well as by
architecture specific code under arch/. Putting the header file in
virt/kvm and using local includes in the architecture part seems at
least dodgy to me, so let's move the file into include/kvm, so that a
more natural "#include <kvm/iodev.h>" can be used by all of the code.
This also solves a problem later when using struct kvm_io_device
in arm_vgic.h.
Fixing up the FSF address in the GPL header and a wrong include path
on the way.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This is needed in e.g. ARM vGIC emulation, where the MMIO handling
depends on the VCPU that does the access.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
CPU hardware ID (phys_id) is defined as u32 in structure acpi_processor,
but phys_id is used as int in acpi processor driver, so it will lead to
some inconsistence for the drivers.
Furthermore, to cater for ACPI arch ports that implement 64 bits CPU
ids a generic CPU physical id type is required.
So introduce typedef u32 phys_cpuid_t in a common file, and introduce
a macro PHYS_CPUID_INVALID as (phys_cpuid_t)(-1) if it's not defined
by other archs, this will solve the inconsistence in acpi processor driver,
and will prepare for the ACPI on ARM64 for the 64 bit CPU hardware ID
in the following patch.
CC: Rafael J Wysocki <rjw@rjwysocki.net>
Suggested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[hj: reworked cpu physid map return codes]
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
ACPI 5.1 does not currently support S states for ARM64 hardware but
ACPI code will call acpi_target_system_state() and acpi_sleep_init()
for device power management, so introduce
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT and select it for x86 and
ia64 only to make sleep functions available, and also introduce stub
function to allow other drivers to function until S states are defined
for ARM64.
It will be no functional change for x86 and IA64.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
- extend/clarify explanations where necessary
- move comments from macro values to before the macro, to
make them more consistent, and to reduce preprocessor overhead
- sort GDT index and selector values likewise by number
- use consistent, modern kernel coding style across the file
- capitalize consistently
- use consistent vertical spacing
- remove the unused get_limit() method (noticed by Andy Lutomirski)
No change in code (verified with objdump -d):
64-bit defconfig+kvmconfig:
815a129bc1f80de6445c1d8ca5b97cad vmlinux.o.before.asm
815a129bc1f80de6445c1d8ca5b97cad vmlinux.o.after.asm
32-bit defconfig+kvmconfig:
e659ef045159ddf41a0771b33a34aae5 vmlinux.o.before.asm
e659ef045159ddf41a0771b33a34aae5 vmlinux.o.after.asm
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We currently have a race: if we're preempted during syscall
exit, we can fail to process syscall return work that is queued
up while we're preempted in ret_from_sys_call after checking
ti.flags.
Fix it by disabling interrupts before checking ti.flags.
Reported-by: Stefan Seyfried <stefan.seyfried@googlemail.com>
Reported-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Fixes: 96b6352c12 ("x86_64, entry: Remove the syscall exit audit")
Link: http://lkml.kernel.org/r/189320d42b4d671df78c10555976bb10af1ffc75.1427137498.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The THREAD_INFO() macro has a somewhat confusingly generic name,
defined in a generic .h C header file. It also does not make it
clear that it constructs a memory operand for use in assembly
code.
Rename it to ASM_THREAD_INFO() to make it all glaringly
obvious on first glance.
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/20150324184442.GC14760@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On CONFIG_IA32_EMULATION=y kernels we set up
MSR_IA32_SYSENTER_CS/ESP/EIP, but on !CONFIG_IA32_EMULATION
kernels we leave them unchanged.
Clear them to make sure the instruction is disabled properly.
SYSCALL is set up properly in both cases.
Acked-by: Denys Vlasenko <dvlasenk@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This file just defines a number of constants, and a few macros
and inline functions. It is particularly badly written.
For example, it is not trivial to see how descriptors are
numbered (you'd expect that should be easy, right?).
This change deobfuscates it via the following changes:
Group all GDT_ENTRY_foo together (move intervening stuff away).
Number them explicitly: use a number, not PREV_DEFINE+1, +2, +3:
I want to immediately see that GDT_ENTRY_PNPBIOS_CS32 is 18.
Seeing (GDT_ENTRY_KERNEL_BASE+6) instead is not useful.
The above change allows to remove GDT_ENTRY_KERNEL_BASE
and GDT_ENTRY_PNPBIOS_BASE, which weren't used anywhere else.
After a group of GDT_ENTRY_foo, define all selector values.
Remove or improve some comments. In particular:
Comment deleted as stating the obvious:
/*
* The GDT has 32 entries
*/
#define GDT_ENTRIES 32
"The segment offset needs to contain a RPL. Grr. -AK"
changed to
"Selectors need to also have a correct RPL (+3 thingy)"
"GDT layout to get 64bit syscall right (sysret hardcodes gdt
offsets)" expanded into a description *how exactly* sysret
hardcodes them.
Patch was tested to compile and not change vmlinux.o
on 32-bit and 64-bit builds (verified with objdump).
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The FIXUP_TOP_OF_STACK macro is only necessary because we don't save %r11
to pt_regs->r11 on SYSCALL64 fast path, but we want ptrace to see it populated.
Bite the bullet, add a single additional PUSH instruction, and remove
the FIXUP_TOP_OF_STACK macro.
The RESTORE_TOP_OF_STACK macro is already a nop. Remove it too.
On SandyBridge CPU, it does not get slower:
measured 54.22 ns per getpid syscall before and after last two
changes on defconfig kernel.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1426785469-15125-4-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With this change, on SYSCALL64 code path we are now populating
pt_regs->cs, pt_regs->ss and pt_regs->rcx unconditionally and
therefore don't need to do that in FIXUP_TOP_OF_STACK.
We lose a number of large instructions there:
text data bss dec hex filename
13298 0 0 13298 33f2 entry_64_before.o
12978 0 0 12978 32b2 entry_64.o
What's more important, we convert two "MOVQ $imm,off(%rsp)" to
"PUSH $imm" (the ones which fill pt_regs->cs,ss).
Before this patch, placing them on fast path was slowing it down
by two cycles: this form of MOV is very large, 12 bytes, and
this probably reduces decode bandwidth to one instruction per cycle
when CPU sees them.
Therefore they were living in FIXUP_TOP_OF_STACK instead (away
from fast path).
"PUSH $imm" is a small 2-byte instruction. Moving it to fast path does
not slow it down in my measurements.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1426785469-15125-3-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
PER_CPU_VAR(kernel_stack) was set up in a way where it points
five stack slots below the top of stack.
Presumably, it was done to avoid one "sub $5*8,%rsp"
in syscall/sysenter code paths, where iret frame needs to be
created by hand.
Ironically, none of them benefits from this optimization,
since all of them need to allocate additional data on stack
(struct pt_regs), so they still have to perform subtraction.
This patch eliminates KERNEL_STACK_OFFSET.
PER_CPU_VAR(kernel_stack) now points directly to top of stack.
pt_regs allocations are adjusted to allocate iret frame as well.
Hopefully we can merge it later with 32-bit specific
PER_CPU_VAR(cpu_current_top_of_stack) variable...
Net result in generated code is that constants in several insns
are changed.
This change is necessary for changing struct pt_regs creation
in SYSCALL64 code path from MOV to PUSH instructions.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1426785469-15125-2-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This changes the THREAD_INFO() definition and all its callsites
so that they do not count stack position from
(top of stack - KERNEL_STACK_OFFSET), but from top of stack.
Semi-mysterious expressions THREAD_INFO(%rsp,RIP) - "why RIP??"
are now replaced by more logical THREAD_INFO(%rsp,SIZEOF_PTREGS)
- "calculate thread_info's address using information that
rsp is SIZEOF_PTREGS bytes below top of stack".
While at it, replace "(off)-THREAD_SIZE(reg)" with equivalent
"((off)-THREAD_SIZE)(reg)". The form without parentheses
falsely looks like we invoke THREAD_SIZE() macro.
Improve comment atop THREAD_INFO macro definition.
This patch does not change generated code (verified by objdump).
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1426785469-15125-1-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rename mce_severity() to mce_severity_intel() and assign the
mce_severity function pointer to mce_severity_amd() during init on AMD.
This way, we can avoid a test to call mce_severity_amd every time we get
into mce_severity(). And it's cleaner to do it this way.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
Suggested-by: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Chen Yucong <slaoub@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1427125373-2918-3-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Add a severities function that caters to AMD processors. This allows us
to do some vendor-specific work within the function if necessary.
Also, introduce a vendor flag bitfield for vendor-specific settings. The
severities code uses this to define error scope based on the prescence
of the flags field.
This is based off of work by Boris Petkov.
Testing details:
Fam10h, Model 9h (Greyhound)
Fam15h: Models 0h-0fh (Orochi), 30h-3fh (Kaveri) and 60h-6fh (Carrizo),
Fam16h Model 00h-0fh (Kabini)
Boris:
Intel SNB
AMD K8 (JH-E0)
Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Chen Yucong <slaoub@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: linux-edac@vger.kernel.org
Link: http://lkml.kernel.org/r/1427125373-2918-2-git-send-email-Aravind.Gopalakrishnan@amd.com
[ Fixup build, clean up comments. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Having syscall32/sysenter32 initialization in a separate tiny
function, called from within a function that is already syscall
init specific, serves no real purpose.
Its existense also caused an unintended effect of having
wrmsrl(MSR_CSTAR) performed twice: once we set it to a dummy
function returning -ENOSYS, and immediately after
(if CONFIG_IA32_EMULATION), we set it to point to the proper
syscall32 entry point, ia32_cstar_target.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The last patch reduced our interrupt-suppression region to one address,
so simplify the code somewhat.
Also, remove the obsolete undefined instruction ranges and the comment
which refers to lguest_guest.S instead of head_32.S.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
i386_head.S renamed to the head_32.S, let's update it in
the comments too.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
An overhead from function call is not appropriate for its size and
frequency of execution.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
kvm_ioapic_update_eoi() wasn't called if directed EOI was enabled.
We need to do that for irq notifiers. (Like with edge interrupts.)
Fix it by skipping EOI broadcast only.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=82211
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The following point:
2. per-CPU pvclock time info is updated if the
underlying CPU changes.
Is not true anymore since "KVM: x86: update pvclock area conditionally,
on cpu migration".
Add task migration notification back.
Problem noticed by Andy Lutomirski.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CC: stable@kernel.org # 3.11+
Commit 054954eb05 ("xen: switch to linear
virtual mapped sparse p2m list") introduced a regression regarding to
memory hotplug for a pv-domain: as the virtual space for the p2m list
is allocated for the to be expected memory size of the domain only,
hotplugged memory above that size will not be usable by the domain.
Correct this by using a configurable size for the p2m list in case of
memory hotplug enabled (default supported memory size is 512 GB for
64 bit domains and 4 GB for 32 bit domains).
Signed-off-by: Juergen Gross <jgross@suse.com>
Cc: <stable@vger.kernel.org> # 3.19+
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
The recent old_rsp -> rsp_scratch rename also changed this
comment, but in this case "old_rsp" was not referring to
PER_CPU(old_rsp).
Fix this.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/1427115839-6397-1-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This allows us to remove some unnecessary ifdefs. There should
be no change to the generated code.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/f7e00f0d668e253abf0bd8bf36491ac47bd761ff.1426728647.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
user_mode_vm() and user_mode() are now the same. Change all callers
of user_mode_vm() to user_mode().
The next patch will remove the definition of user_mode_vm.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/43b1f57f3df70df5a08b0925897c660725015554.1426728647.git.luto@kernel.org
[ Merged to a more recent kernel. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
user_mode() is now identical to user_mode_vm(). Subsequent patches
will change all callers of user_mode_vm() to user_mode() and then
delete user_mode_vm().
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/0dd03eacb5f0a2b5ba0240de25347a31b493c289.1426728647.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A few of the user_mode() checks in traps.c are immediately after
explicit checks for vm86 mode. Change them to user_mode_ignore_vm86().
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/0b324d5b75c3402be07f8d3c6245ed7f4995029e.1426728647.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There's no point in checking the VM bit on 64-bit, and, since
we're explicitly checking it, we can use user_mode_ignore_vm86()
after the check.
While we're at it, rearrange the #ifdef slightly to make the code
flow a bit clearer.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/dc1457a734feccd03a19bb3538a7648582f57cdd.1426728647.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
user_mode() is dangerous and user_mode_vm() has a confusing name.
Add user_mode_ignore_vm86() (equivalent to current user_mode()).
We'll change the small number of legitimate users of user_mode()
to user_mode_ignore_vm86().
Inspired by grsec, although this works rather differently.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/202c56ca63823c338af8e2e54948dbe222da6343.1426728647.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
strcmp() is always expected to return 0 when arguments are equal,
negative when its first argument @str1 is less than its second argument
@str2 and a positive value otherwise. Previously strcmp("a", "b")
returned 1. Now it gives -1, as it is supposed to.
Until now this bug never triggered, because all uses for strcmp() in the
boot code tested for nonzero:
triton:~/tip> git grep strcmp arch/x86/boot/
arch/x86/boot/boot.h:int strcmp(const char *str1, const char *str2);
arch/x86/boot/edd.c: if (!strcmp(eddarg, "skipmbr") || !strcmp(eddarg, "skip")) {
arch/x86/boot/edd.c: else if (!strcmp(eddarg, "off"))
arch/x86/boot/edd.c: else if (!strcmp(eddarg, "on"))
should in the future strcmp() be used in a comparative way in the boot
code, it might have led to (not so subtle) bugs.
Signed-off-by: Arjun Sreedharan <arjun024@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1426520267-1803-1-git-send-email-arjun024@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The private pointer provided by the cacheinfo code is used to implement
the AMD L3 cache-specific attributes using a pointer to the northbridge
descriptor. It is needed for performing L3-specific operations and for
that we need a couple of PCI devices and other service information, all
contained in the northbridge descriptor.
This results in failure of cacheinfo setup as shown below as
cache_get_priv_group() returns the uninitialised private attributes which
are not valid for Intel processors.
------------[ cut here ]------------
WARNING: CPU: 3 PID: 1 at fs/sysfs/group.c:102
internal_create_group+0x151/0x280()
sysfs: (bin_)attrs not set by subsystem for group: index3/
Modules linked in:
CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.0.0-rc3+ #1
Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A13 05/11/2014
...
Call Trace:
dump_stack
warn_slowpath_common
warn_slowpath_fmt
internal_create_group
sysfs_create_groups
device_add
cpu_device_create
? __kmalloc
cache_add_dev
cacheinfo_sysfs_init
? container_dev_init
do_one_initcall
kernel_init_freeable
? rest_init
kernel_init
ret_from_fork
? rest_init
This patch fixes the issue by checking if the L3 cache indices are
populated correctly (AMD-specific) before initializing the private
attributes.
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Certain MSRs are only relevant to a kernel in host mode, and kvm had
chosen not to implement these MSRs at all for guests. If a guest kernel
ever tried to access these MSRs, the result was a general protection
fault.
KVM will be separately patched to return 0 when these MSRs are read,
and this patch ensures that MSR accesses are tolerant of exceptions.
Signed-off-by: Jesse Larrew <jesse.larrew@amd.com>
[ Drop {} braces around loop ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Joel Schopp <joel.schopp@amd.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-edac@vger.kernel.org
Link: http://lkml.kernel.org/r/1426262619-5016-1-git-send-email-jesse.larrew@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that eager_fpu_init_bp() does setup_init_fpu_buf() only and
nothing else, we can remove it and move this code into its "caller",
eager_fpu_init().
This avoids the confusing games with "static __refdata void (*boot_func)":
init_xstate_buf can be NULL only during boot, so it is safe to call the
__init-annotated setup_init_fpu_buf() function in eager_fpu_init(), we
just need to mark it as __init_refok.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pekka Riikonen <priikone@iki.fi>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Link: http://lkml.kernel.org/r/20150314151334.GC13029@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that kthreads do not use FPU until they get executed, swapper/0
doesn't need to allocate fpu->state.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pekka Riikonen <priikone@iki.fi>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Link: http://lkml.kernel.org/r/20150313182716.GB8249@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Call it what it does and in accordance with the context where it is
used: we reset the FPU state either because we were unable to restore it
from the one saved in the task or because we simply want to reset it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
flush_thread() -> drop_init_fpu() is suboptimal and confusing. It does
drop_fpu() or restore_init_xstate() depending on !use_eager_fpu(). But
flush_thread() too checks eagerfpu right after that, and if it is true
then restore_init_xstate() just burns CPU for no reason. We are going to
load init_xstate_buf again after we set used_math()/user_has_fpu(), until
then the FPU state can't survive after switch_to().
Remove it, and change the "if (!use_eager_fpu())" to call drop_fpu().
While at it, clean up the tsk/current usage.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pekka Riikonen <priikone@iki.fi>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Link: http://lkml.kernel.org/r/20150313173030.GA31217@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Change flush_thread() to do user_fpu_begin() and restore_init_xstate()
instead of math_state_restore().
Note: "TODO: cleanup this horror" is still valid. We do not need
init_fpu() at all, we only need fpu_alloc() and memset(0). But this
needs other changes, in particular user_fpu_begin() should set
used_math().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pekka Riikonen <priikone@iki.fi>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Link: http://lkml.kernel.org/r/20150311173449.GE5032@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Extract the "use_eager_fpu()" code from drop_init_fpu() into a new,
simple helper restore_init_xstate(). The next patch adds another user.
- It is not clear why we do not check use_fxsr() like fpu_restore_checking()
does. eager_fpu_init_bp() calls setup_init_fpu_buf() too, and we have the
"eagerfpu=on" kernel option.
- Ignoring the fact that init_xstate_buf is "struct xsave_struct *", not
"union thread_xstate *", it is not clear why we can not simply use
fpu_restore_checking() and avoid the code duplication.
- It is not clear why we can't call setup_init_fpu_buf() unconditionally
to always create init_xstate_buf(). Then do_device_not_available() path
(at least) could use restore_init_xstate() too. It doesn't need to init
fpu->state, its content doesn't matter until unlazy_fpu()/__switch_to()/etc
which overwrites this memory anyway.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pekka Riikonen <priikone@iki.fi>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Link: http://lkml.kernel.org/r/20150311173429.GD5032@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, user_fpu_begin() has a single caller and it is not clear why
do we actually need it and why we should not worry about preemption
right after preempt_enable().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pekka Riikonen <priikone@iki.fi>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Link: http://lkml.kernel.org/r/20150311173409.GC5032@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We want to check whether user code is in 32-bit mode, not
whether the task is nominally 32-bit.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/33e5107085ce347a8303560302b15c2cadd62c4c.1426728647.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is slightly shorter and slightly faster. It's also more
correct: the split between user and kernel addresses is
TASK_SIZE_MAX, regardless of ti->flags.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/09156b63bad90a327827003c9e53faa82ef4c56e.1426728647.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Both the execve() and sigreturn() family of syscalls have the
ability to change registers in ways that may not be compatabile
with the syscall path they were called from.
In particular, SYSRET and SYSEXIT can't handle non-default %cs and %ss,
and some bits in eflags.
These syscalls have stubs that are hardcoded to jump to the IRET path,
and not return to the original syscall path.
The following commit:
76f5df43ca ("Always allocate a complete "struct pt_regs" on the kernel stack")
recently changed this for some 32-bit compat syscalls, but introduced a bug where
execve from a 32-bit program to a 64-bit program would fail because it still returned
via SYSRETL. This caused Wine to fail when built for both 32-bit and 64-bit.
This patch sets TIF_NOTIFY_RESUME for execve() and sigreturn() so
that the IRET path is always taken on exit to userspace.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1426978461-32089-1-git-send-email-brgerst@gmail.com
[ Improved the changelog and comments. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
