smatch correctly warns:
drivers/gpu/drm/drm_fb_helper.c:1960 drm_target_preferred() warn: should '1 << i' be a 64 bit type?
drivers/gpu/drm/drm_fb_helper.c:2001 drm_target_preferred() warn: should '1 << i' be a 64 bit type?
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A drm driver that is implementing
fb_debug_enter and fb_debug_leave
in struct fb_ops with drm fb helper functions
drm_fb_helper_debug_enter and drm_fb_helper_debug_leave
must also implement the callback 'mode_set_base_atomic' in struct
drm_crtc_helper_funcs. See Documentation/DocBook/kgdb.tmpl. The current
implementation will segfault when 'mode_set_base_atomic' is a NULL
pointer.
Before this patch at least the drm drivers armada, ast, qxl, udl and
virtio do not have a 'mode_set_base_atomic' implementation but using
drm_fb_helper_debug_(enter|leave). So these drivers may segfault when
callbacks fb_debug_(enter|leave) are called.
Avoid the issue by just checking for NULL pointers. So all drivers can
unconditionally implement fb_debug_(enter|leave) with the drm_fb_helper
functions. If callback 'mode_set_base_atomic' is not implemented, the
code in drm_fb_helper_debug_(enter|leave) does effectively nothing.
Signed-off-by: Stefan Christ <contact@stefanchrist.eu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-2-git-send-email-contact@stefanchrist.eu
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYHmoCAAoJEHm+PkMAQRiG7RMIAI2i7Y5hpL5yCxK5AFaL4u/G
KxXfp1B1UanUTgjOmd7zGqtDYcFX9t7GTTUFixQ7/9Opr4PD9qbnatoDGSc3xjbT
msDgA1B78F1/Q3kHWfeGq32MihQ4mj5NwUCo+igUcUvvWG7mHgzErj/Nh5RoobQX
p/izdpTbrw3GX6xXB8olbG7XWHaVye/+TT3q6+gmgm8I/QEujcLeGoycE0zlhPN8
FG/JX76At/+ZM2Py7Oxo3k+oKL9CHrtOQYDp/wN0uslV5eYvvkZz0/M1HMOGZt+c
gZU5jzM17K7C4Nzo06WAuBU9wUBGc25m+cPicLlOmljnzfU+f50SKaDjZq3p7QI=
=2KUF
-----END PGP SIGNATURE-----
Backmerge tag 'v4.9-rc4' into drm-next
Linux 4.9-rc4
This is needed for nouveau development.
The fbdev helper code keeps around two lists of connectors. One is the
list of all connectors it could use, and that list already holds
references for all the connectors. However the other list, or rather
lists, is the one actively being used. That list is tracked per-crtc
and currently doesn't hold any extra references. Let's grab those
extra references to avoid oopsing when the connector vanishes. The
list of all possible connectors should get updated when the hpd happens,
but the list of actively used connectors would not get updated until
the next time the fb-helper picks through the set of possible connectors.
And so we need to hang on to the connectors until that time.
Since we need to clean up in drm_fb_helper_crtc_free() as well,
let's pull the code to a common place. And while at it let's
pull in up the modeset->mode cleanup in there as well. The case
of modeset->fb is a bit less clear. I'm thinking we should probably
hold a reference to it, but for now I just slapped on a FIXME.
v2: Cleanup things drm_fb_helper_crtc_free() too (Chris)
v3: Don't leak modeset->connectors (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Carlos Santa <carlos.santa@intel.com> (v1)
Tested-by: Kirill A. Shutemov <kirill@shutemov.name> (v1)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477492878-4990-1-git-send-email-ville.syrjala@linux.intel.com
We need to drop the connector references already taken when we
abort in the middle of drm_fb_helper_single_add_all_connectors()
Cc: stable@vger.kernel.org
Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Carlos Santa <carlos.santa@intel.com>
Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-2-git-send-email-ville.syrjala@linux.intel.com
Since 4.7 kernel, we've seen the error messages like
kernel: [TTM] Buffer eviction failed
kernel: qxl 0000:00:02.0: object_init failed for (4026540032, 0x00000001)
kernel: [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate VRAM BO
on QXL when switching and accessing on VT. The culprit was the
generic deferred_io code (qxl driver switched to it since 4.7).
There is a race between the dirty clip update and the call of
callback.
In drm_fb_helper_dirty(), the dirty clip is updated in the spinlock,
while it kicks off the update worker outside the spinlock. Meanwhile
the update worker clears the dirty clip in the spinlock, too. Thus,
when drm_fb_helper_dirty() is called concurrently, schedule_work() is
called after the clip is cleared in the first worker call.
This patch addresses it by validating the clip before calling the
dirty fb callback.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98322
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1003298
Fixes: eaa434defa ('drm/fb-helper: Add fb_deferred_io support')
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161020150530.5787-1-tiwai@suse.de
Now that all drivers have been converted over to the per-plane rotation
property, we can just nuke the global rotation property.
v2: Rebase due to BIT(),__builtin_ffs() & co.
Deal with superfluous code shuffling
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477077768-4274-4-git-send-email-ville.syrjala@linux.intel.com
Not all planes on the system may support the same rotations/reflections,
so make it possible to create a separate property for each plane.
This way userspace gets told exactly which rotations/reflections are
possible for each plane.
v2: Add drm_plane_create_rotation_property() helper
v3: Drop the BIT(), __builtin_ffs(x) - 1,
Moar WARNs for bad parameters
Deal with superfluous code shuffling
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-4-git-send-email-ville.syrjala@linux.intel.com
The current fbdev emulation does not allow to push back changes in
width, height or depth to KMS, hence reject any changes with an
error. This makes sure that fbdev ioctl's fail properly and user
space does not assume that changes succeeded.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161011231504.17688-1-stefan@agner.ch
drm_atomic_state has a complicated single owner model that tracks the
single reference from allocation through to destruction on another
thread - or perhaps on a local error path. We can simplify this tracking
by using reference counting (at a cost of a few more atomics). This is
even more beneficial when the lifetime of the state becomes more
convoluted than being passed to a single worker thread for the commit.
v2: Double check !intel atomic_commit functions for missing gets
v3: Update kerneldocs
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161014121833.439-27-chris@chris-wilson.co.uk
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJX6H4uAAoJEHm+PkMAQRiG5sMH/3yzrMiUCSokdS+cvY+jgKAG
JS58JmRvBPz2mRaU3MRPBGRDeCz/Nc9LggL2ZcgM+E1ZYirlYyQfIED3lkqk5R07
kIN1wmb+kQhXyU4IY3fEX7joqyKC6zOy4DUChPkBQU0/0+VUmdVmcJvsuPlnMZtf
g95m0BdYTui+eDezASRqOEp3Lb5ONL4c3ao4yBP0LHF033ctj3VJQiyi5uERPZJ0
5e6Mo7Wxn78t9WqJLQAiEH46kTwT2plNlxf3XXqTenfIdbWhqE873HPGeSMa3VQV
VywXTpCpSPQsA8BYg66qIbebdKOhs9MOviHVfqDtwQlvwhjlBDya0gNHfI5fSy4=
=Y/L5
-----END PGP SIGNATURE-----
Merge tag 'v4.8-rc8' into drm-next
Linux 4.8-rc8
There was a lot of fallout in the imx/amdgpu/i915 drivers, so backmerge
it now to avoid troubles.
* tag 'v4.8-rc8': (1442 commits)
Linux 4.8-rc8
fault_in_multipages_readable() throws set-but-unused error
mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing
radix tree: fix sibling entry handling in radix_tree_descend()
radix tree test suite: Test radix_tree_replace_slot() for multiorder entries
fix memory leaks in tracing_buffers_splice_read()
tracing: Move mutex to protect against resetting of seq data
MIPS: Fix delay slot emulation count in debugfs
MIPS: SMP: Fix possibility of deadlock when bringing CPUs online
mm: delete unnecessary and unsafe init_tlb_ubc()
huge tmpfs: fix Committed_AS leak
shmem: fix tmpfs to handle the huge= option properly
blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx
MIPS: Fix pre-r6 emulation FPU initialisation
arm64: kgdb: handle read-only text / modules
arm64: Call numa_store_cpu_info() earlier.
locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text
nvme-rdma: only clear queue flags after successful connect
i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended
perf/core: Limit matching exclusive events to one PMU
...
drm/drm_fb_helper.c:2306:12: warning: symbol 'drm_fb_helper_modinit' was not declared. Should it be static?
While at it, move the lefover static inline to the right place.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1474292035-15695-4-git-send-email-ville.syrjala@linux.intel.com
I figured I might as well go ocd and make them booleans and rename the
locked version too.
v2: Review from Noralf.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Fixes: cfe63423d9 ("drm/fb-helper: Add drm_fb_helper_set_suspend_unlocked()")
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160823152727.31788-1-daniel.vetter@ffwll.ch
This adds a function that also takes the console lock before calling
fb_set_suspend() in contrast to drm_fb_helper_set_suspend() which is
a plain wrapper around fb_set_suspend().
Resume is run asynchronously using a worker if the console lock is
already taken. This is modelled after the i915 driver.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1471953246-29602-1-git-send-email-noralf@tronnes.org
This reverts commit:
fa7d81bb3c ("drm/fb-helper: Reduce READ_ONCE(master) to lockless_dereference")
As Peter explained:
[...] lockless_dereference() is _stronger_ than READ_ONCE(), not weaker.
[...]
Also, clue is in the name: 'dereference', you don't actually dereference
the pointer here, only load it.
My next patch breaks the compile without this revert, because it assumes
you want to deference and thus also need the struct type visible (which
it isn't here), so revert it.
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1470909022-687-1-git-send-email-johannes@sipsolutions.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
These are the leftovers I could only track down using keep_warnings =
True. For some of them we might want to update our style guide on how
to reference structures and constants, not sure ...
Cc: Markus Heiser <markus.heiser@darmarit.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471034937-651-1-git-send-email-daniel.vetter@ffwll.ch
We are only documenting that the read is outside of the lock, and do not
require strict ordering on the operation. In this case the more relaxed
lockless_dereference() will suffice.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466581572-16608-1-git-send-email-chris@chris-wilson.co.uk
There can only be one current master, and it's for the overall device.
Render/control minors don't support master-based auth at all.
This simplifies the master logic a lot, at least in my eyes: All these
additional pointer chases are just confusing.
While doing the conversion I spotted some locking fail:
- drm_lock/drm_auth check dev->master without holding the
master_mutex. This is fallout from
commit c996fd0b95
Author: Thomas Hellstrom <thellstrom@vmware.com>
Date: Tue Feb 25 19:57:44 2014 +0100
drm: Protect the master management with a drm_device::master_mutex v3
but I honestly don't care one bit about those old legacy drivers
using this.
- debugfs name info should just grab master_mutex.
- And the fbdev helper looked at it to figure out whether someone is
using KMS. We just need a consistent value, so READ_ONCE. Aside: We
should probably check if anyone has opened a control node too, but I
guess current userspace doesn't really do that yet.
v2: Balance locking, reported by Julia.
v3: Rebase on top of Chris' oops fixes.
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466499262-18717-1-git-send-email-daniel.vetter@ffwll.ch
Drivers transitioning to atomic might not yet want to enable full
DRIVER_ATOMIC support when it's not entirely working. But using atomic
internally makes a lot more sense earlier.
Instead of spreading such flags to more places I figured it's simpler
to just check for mode_config->funcs->atomic_commit, and use atomic
paths if that is set. For the only driver currently transitioning
(i915) this does the right thing.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-23-git-send-email-daniel.vetter@ffwll.ch
Adapt drm_pick_crtcs() and update_connector_routing() to fallback to
drm_atomic_helper_best_encoder() if funcs->best_encoder() is NULL so
that DRM drivers can leave this hook unassigned if they know they want
to use drm_atomic_helper_best_encoder().
Update the vtables documentation accordingly.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-2-git-send-email-boris.brezillon@free-electrons.com
Change return value to int to propagate errors from gamma_set,
and remove start parameter. Updates always use the full size,
and some drivers even ignore the start parameter altogether.
This is needed for atomic drivers, where an atomic commit can
fail with -EINTR or -ENOMEM and should be restarted. This is already
and issue for drm_atomic_helper_legacy_set_gamma, which this patch
fixes up.
Changes since v1:
- Fix compiler warning. (Emil)
- Fix commit message (Daniel)
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Mathieu Larouche <mathieu.larouche@matrox.com>
Cc: Thierry Reding <treding@nvidia.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Improve commit message a bit more, mention that this fixes
the helper.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/742944bc-9f41-1acb-df4f-0fd4c8a10168@linux.intel.com
DRM fbdev emulation only supports pallete_color with depth == 8, and
truecolor with depth > 8. Handling depth == 16 for palettes is hence
dead code, let's remove it.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1459331485-28376-3-git-send-email-daniel.vetter@ffwll.ch
During boot, MST hotplugs are generally expected (even if no physical
hotplugging occurs) and result in DRM's connector topology changing.
This means that using num_connector from the current mode configuration
can lead to the number of connectors changing under us. This can lead to
some nasty scenarios in fbcon:
- We allocate an array to the size of dev->mode_config.num_connectors.
- MST hotplug occurs, dev->mode_config.num_connectors gets incremented.
- We try to loop through each element in the array using the new value
of dev->mode_config.num_connectors, and end up going out of bounds
since dev->mode_config.num_connectors is now larger then the array we
allocated.
fb_helper->connector_count however, will always remain consistent while
we do a modeset in fb_helper.
Note: This is just polish for 4.7, Dave Airlie's drm_connector
refcounting fixed these bugs for real. But it's good enough duct-tape
for stable kernel backporting, since backporting the refcounting
changes is way too invasive.
Cc: stable@vger.kernel.org
Signed-off-by: Lyude <cpaul@redhat.com>
[danvet: Clarify why we need this. Also remove the now unused "dev"
local variable to appease gcc.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1463065021-18280-3-git-send-email-cpaul@redhat.com
This takes a reference count when fbdev adds the connector,
and drops it when it removes the connector.
It also drops the now unneeded code to find connectors
and remove the from the modeset as they are reference counted.
v2: drop references when removing all connectors at end.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds deferred io support to drm_fb_helper.
The fbdev framebuffer changes are flushed using the callback
(struct drm_framebuffer *)->funcs->dirty() by a dedicated worker
ensuring that it always runs in process context.
For those wondering why we need to be able to handle atomic calling
contexts: Both panic paths and cursor code and fbcon blanking can run
from atomic. See
commit bcb39af448
Author: Dave Airlie <airlied@redhat.com>
Date: Thu Feb 7 11:19:15 2013 +1000
drm/udl: make usage as a console safer
for where this was originally discovered.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Augment commit message with why we need to handle atomic
contexts.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-4-git-send-email-noralf@tronnes.org
The module_init and module_exit functions will start here, and call the
subsequent init's and exit's.
v10:
- Keep __init on drm_fb_helper init function.
- Move MODULE_* macros to the common file.
Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-2-git-send-email-rafael.antognolli@intel.com
Every new KMS driver writer seems to run into this and wonder how
exactly drm_fb_helper_initial_config can die doing nothing at all.
Set up some big warnings signs around this newbie trap to avoid future
frustration and wasting everyone's time.
v2: Edits from Laurent.
Cc: Carlos Palminha <CARLOS.PALMINHA@synopsys.com>
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: laurent.pinchart@ideasonboard.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1453449225-10954-1-git-send-email-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
pan_display_atomic() calls drm_atomic_clean_old_fb() to sanitize the
legacy FB fields (plane->fb and plane->old_fb). However it was building
the plane mask to pass to this function incorrectly (the bitwise OR was
using plane indices rather than plane masks). The end result was that
sometimes the legacy pointers would become out of sync with the atomic
pointers. If another operation tried to re-set the same FB onto the
plane, we might end up with the pointers back in sync, but improper
reference counts, which would eventually lead to system crashes when we
accessed a pointer to a prematurely-destroyed FB.
The cause here was a very subtle bug introduced in commit:
commit 07d3bad6c1
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Wed Nov 11 11:29:11 2015 +0100
drm/core: Fix old_fb handling in pan_display_atomic.
I found the crashes were most easily reproduced (on i915 at least) by
starting X and then VT switching to a VT that wasn't running a console
instance...the sequence of vt/fbcon entries that happen in that case
trigger a reference count mismatch and crash the system.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93313
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
More drm-misc for 4.4.
- fb refcount fix in atomic fbdev
- various locking reworks to reduce drm_global_mutex and dev->struct_mutex
- rename docbook to gpu.tmpl and include vga_switcheroo stuff, plus more
vga_switcheroo (Lukas Wunner)
- viewport check fixes for atomic drivers from Ville
- DRM_DEBUG_VBL from Ville
- non-contentious header fixes from Mikko Rapeli
- small things all over
* tag 'topic/drm-misc-2015-10-19' of git://anongit.freedesktop.org/drm-intel: (31 commits)
drm/fb-helper: Fix fb refcounting in pan_display_atomic
drm/fb-helper: Set plane rotation directly
drm: fix mutex leak in drm_dp_get_mst_branch_device
drm: Check plane src coordinates correctly during page flip for atomic drivers
drm: Check crtc viewport correctly with rotated primary plane on atomic drivers
drm: Refactor plane src coordinate checks
drm: Swap w/h when converting the mode to src coordidates for a rotated primary plane
drm: Don't leak fb when plane crtc coodinates are bad
ALSA: hda - Spell vga_switcheroo consistently
drm/gem: Use kref_get_unless_zero for the weak mmap references
drm/vgem: Drop vgem_drm_gem_mmap
drm: Fix return value of drm_framebuffer_init()
drm/gem: Use container_of in drm_gem_object_free
drm/gem: Check locking in drm_gem_object_unreference
drm/gem: Drop struct_mutex requirement from drm_gem_mmap_obj
drm/i810_drm.h: include drm/drm.h
r128_drm.h: include drm/drm.h
savage_drm.h: include <drm/drm.h>
gpu/doc: Convert to markdown harder
gpu/doc: Add vga_switcheroo documentation
...
In
commit bbb1e52402
Author: Rob Clark <robdclark@gmail.com>
Date: Tue Aug 25 15:35:58 2015 -0400
drm/fb-helper: atomic restore_fbdev_mode()..
we've forgotten to do the plane->old_fb refcount dance for
pan_display_atomic, which can result in refcount leaks if the current
configuration is not from fbcon. Which apparently can happen when
vt-switching - fbcon does a pan first before a set_par.
OCD-align function parameters while at it.
v2: Actually git add the OCD.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92483
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1445015490-27682-1-git-send-email-daniel.vetter@ffwll.ch
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The point behind standardizing properties into core drm state
structures is also that internal code looks prettiers. Take advantage
of that and set rotation directly in the fbdev atomic code.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1445012594-25988-1-git-send-email-daniel.vetter@ffwll.ch
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If a driver uses the cursor_set2 crtc callback rather than
cursor_set, use that. This fixes the fbdev helper for drivers
that use cursor_set2.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Starting with commit
commit 28cc504e8d
Author: Rob Clark <robdclark@gmail.com>
Date: Tue Aug 25 15:36:00 2015 -0400
drm/i915: enable atomic fb-helper
I've been seeing some panics on i915 when the DRM master shuts down that appear
to be caused by using an already-freed framebuffer (i.e., we're unexpectedly
dropping our initial FB's reference count to 0 and freeing it, which causes a
crash when we try to restore it later). Digging deeper, the state FB
refcounting is working as expected, but we seem to be missing proper
refcounting on the legacy plane->fb pointers in the new atomic fbdev code.
Tracking plane->old_fb and then doing a ref/unref at the end of the
fbdev restore like we do in the legacy ioctl's ensures we don't miscount
references on plane->fb and avoids the panics.
v2 from Daniel:
Really do what the atomic ioctl does:
- Also update plane->fb and plane->crtc.
- Clear out plane->old_fb on failures too.
v3: git add everything. Oops.
v4: Also clear old_fb in all other failure paths, spotted by David.
Cc: Rob Clark <robdclark@gmail.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com> (v1)
Reviewd-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add support for using atomic code-paths for restore_fbdev_mode().
Signed-off-by: Rob Clark <robdclark@gmail.com>
[danvet: Bikeshed comments slightly.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Faster than recompiling.
Note that restore_fbdev_mode_unlocked is a bit special and the only
one which returns an error code when fbdev isn't there - i915 needs
that one to not fall over with some additional fbcon related restore
code. Everyone else just ignores the return value or only prints a
DRM_DEBUG level message.
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Using bool and returning true upon error is very uncommon. Also an int
return value is actually what all the callers which did check it seem
to have expected.
v2: Restore hunk misplaced in a rebase, spotted by Rob.
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If CONFIG_MAGIC_SYSRQ is not set:
drivers/gpu/drm/drm_fb_helper.c:390:13: warning: 'drm_fb_helper_force_kernel_mode' defined but not used [-Wunused-function]
static bool drm_fb_helper_force_kernel_mode(void)
^
Move drm_fb_helper_force_kernel_mode() inside the existing #ifdef to fix
this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As of commit 5ea1f752ae ("drm: add
drm_fb_helper_restore_fbdev_mode_unlocked()"),
drm_fb_helper_restore_fbdev_mode() is no longer public, and drivers
should call drm_fb_helper_restore_fbdev_mode_unlocked() from their
->lastclose callbacks instead.
Update the documentation to reflect this, and absorb the one liner
drm_fb_helper_restore_fbdev_mode() into its single caller.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since the panic handling is gone this is only used for force-restoring
the fbdev/fbcon from sysrq, and that's done with a work item. No need
any more to do trylocks, we can just do normal locking.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
