Commit Graph

32420 Commits

Author SHA1 Message Date
Andrey Borzenkov
8a246ee43f make /proc/acpi/ac_adapter dependent on ACPI_PROCFS
Do not provide /proc/acpi/ac_adapter if ACPI_PROCFS is not defined.  This
eliminates duplicated power adapters in HAL and makes it consistent with
battery module

Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru>
Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:44 -08:00
Randy Dunlap
579d6d93ca gbefb: fix section mismatch warnings
Make 'default_mode' and 'default_var' be __initdata.
Fixes these section warnings:

WARNING: vmlinux.o(.data+0x128e0): Section mismatch: reference to .init.data:default_mode_CRT (between 'default_mode' and 'default_var')
WARNING: vmlinux.o(.data+0x128e4): Section mismatch: reference to .init.data:default_var_CRT (between 'default_var' and 'dev_attr_size')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:42 -08:00
Christian Borntraeger
5d0360ee96 rd: fix data corruption on memory pressure
We have seen ramdisk based install systems, where some pages of mapped
libraries and programs were suddendly zeroed under memory pressure.  This
should not happen, as the ramdisk avoids freeing its pages by keeping them
dirty all the time.

It turns out that there is a case, where the VM makes a ramdisk page clean,
without telling the ramdisk driver.  On memory pressure shrink_zone runs
and it starts to run shrink_active_list.  There is a check for
buffer_heads_over_limit, and if true, pagevec_strip is called.
pagevec_strip calls try_to_release_page.  If the mapping has no releasepage
callback, try_to_free_buffers is called.  try_to_free_buffers has now a
special logic for some file systems to make a dirty page clean, if all
buffers are clean.  Thats what happened in our test case.

The simplest solution is to provide a noop-releasepage callback for the
ramdisk driver.  This avoids try_to_free_buffers for ramdisk pages.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:42 -08:00
David Brownell
822bd5aa2b tle62x0 driver stops ignoring read errors
The tle62x0 driver was ignoring all read errors.  This patch makes it
pass such errors up the stack, instead of returning bogus data.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:42 -08:00
Bjorn Helgaas
e02f5f52ca serial: only use PNP IRQ if it's valid
"Luming Yu" <luming.yu@gmail.com> says:

  There is a "ttyS1 irq is -1" problem observed on tiger4 which cause the
  serial port broken.

  It is because that there is __no__ ACPI IRQ resource assigned for the
  serial port.  So the value of the IRQ for the port is never changed since it
  got initialized to -1.

If PNP supplies a valid IRQ, use it.  Otherwise, leave port.irq == 0, which
means "no IRQ" to the serial core.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Yu Luming <luming.yu@intel.com>
Acked-by: Matthew Wilcox <matthew@wil.cx>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:41 -08:00
Darrick J. Wong
57510c2f93 i5000_edac: no need to __stringify() KBUILD_BASENAME
The i5000_edac driver's PCI registration structure has the name
""i5000_edac"" (with extra set of double-quotes) which is probably not
intentional.  Get rid of __stringify.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:41 -08:00
Bjorn Helgaas
9626f1f117 rtc: fall back to requesting only the ports we actually use
Firmware like PNPBIOS or ACPI can report the address space consumed by the
RTC.  The actual space consumed may be less than the size (RTC_IO_EXTENT)
assumed by the RTC driver.

The PNP core doesn't request resources yet, but I'd like to make it do so.
If/when it does, the RTC_IO_EXTENT request may fail, which prevents the RTC
driver from loading.

Since we only use the RTC index and data registers at RTC_PORT(0) and
RTC_PORT(1), we can fall back to requesting just enough space for those.

If the PNP core requests resources, this results in typical I/O port usage
like this:

    0070-0073 : 00:06		<-- PNP device 00:06 responds to 70-73
      0070-0071 : rtc		<-- RTC driver uses only 70-71

instead of the current:

    0070-0077 : rtc		<-- RTC_IO_EXTENT == 8

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:41 -08:00
Bjorn Helgaas
4c06be10c7 rtc: release correct region in error path
The misc_register() error path always released an I/O port region,
even if the region was memory-mapped (only mips uses memory-mapped RTC,
as far as I can see).

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:41 -08:00
Shannon Nelson
7bb67c14fd I/OAT: Add support for version 2 of ioatdma device
Add support for version 2 of the ioatdma device.  This device handles
the descriptor chain and DCA services slightly differently:
 - Instead of moving the dma descriptors between a busy and an idle chain,
   this new version uses a single circular chain so that we don't have
   rewrite the next_descriptor pointers as we add new requests, and the
   device doesn't need to re-read the last descriptor.
 - The new device has the DCA tags defined internally instead of needing
   them defined statically.

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Cc: "Williams, Dan J" <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:41 -08:00
Dan Williams
6c55be8b96 raid5: fix unending write sequence
<debug output from Joel's system>
handling stripe 7629696, state=0x14 cnt=1, pd_idx=2 ops=0:0:0
check 5: state 0x6 toread 0000000000000000 read 0000000000000000 write fffff800ffcffcc0 written 0000000000000000
check 4: state 0x6 toread 0000000000000000 read 0000000000000000 write fffff800fdd4e360 written 0000000000000000
check 3: state 0x1 toread 0000000000000000 read 0000000000000000 write 0000000000000000 written 0000000000000000
check 2: state 0x1 toread 0000000000000000 read 0000000000000000 write 0000000000000000 written 0000000000000000
check 1: state 0x6 toread 0000000000000000 read 0000000000000000 write fffff800ff517e40 written 0000000000000000
check 0: state 0x6 toread 0000000000000000 read 0000000000000000 write fffff800fd4cae60 written 0000000000000000
locked=4 uptodate=2 to_read=0 to_write=4 failed=0 failed_num=0
for sector 7629696, rmw=0 rcw=0
</debug>

These blocks were prepared to be written out, but were never handled in
ops_run_biodrain(), so they remain locked forever.  The operations flags
are all clear which means handle_stripe() thinks nothing else needs to be
done.

This state suggests that the STRIPE_OP_PREXOR bit was sampled 'set' when it
should not have been.  This patch cleans up cases where the code looks at
sh->ops.pending when it should be looking at the consistent stack-based
snapshot of the operations flags.

Report from Joel:
	Resync done. Patch fix this bug.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Joel Bertrand <joel.bertrand@systella.fr>
Cc: <stable@kernel.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:39 -08:00
David Brownell
19cd7537bd atmel_serial build warnings begone
Remove annoying build warnings about unused variables in atmel_serial,
which afflict both AT91 and AVR32 builds.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:39 -08:00
Haavard Skinnemoen
348badf1e8 dmaengine: fix broken device refcounting
When a DMA device is unregistered, its reference count is decremented twice
for each channel: Once dma_class_dev_release() and once in
dma_chan_cleanup().  This may result in the DMA device driver's remove()
function completing before all channels have been cleaned up, causing lots
of use-after-free fun.

Fix it by incrementing the device's reference count twice for each
channel during registration.

[dan.j.williams@intel.com: kill unnecessary client refcounting]
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:39 -08:00
Julia Lawall
90d8dabf74 drivers/misc: Move misplaced pci_dev_put's
Move pci_dev_put outside the loops in which it occurs.  Within the loop,
pci_dev_put is done implicitly by pci_get_device.

The problem was detected using the following semantic patch, and corrected
by hand.

@@
expression dev;
expression E;
@@

- pci_dev_put(dev)
   ... when != dev = E
- pci_get_device(...,dev)

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:39 -08:00
Ondrej Zary
e62aa046e1 paride: pf driver fixes
The pf driver for parallel port floppy drives seems to be broken.  At least
with Imation SuperDisk with EPAT chip, the driver calls pi_connect() and
pi_disconnect after each transferred sector.  At least with EPAT, this
operation is very expensive - causes drive recalibration.  Thus, transferring
even a single byte (dd if=/dev/pf0 of=/dev/null bs=1 count=1) takes 20
seconds, making the driver useless.

The pf_next_buf() function seems to be broken as it returns 1 always (except
when pf_run is non-zero), causing the loop in do_pf_read_drq (and
do_pf_write_drq) to be executed only once.

The following patch fixes this problem.  It also fixes swapped descriptions in
pf_lock() function and removes DBMSG macro, which seems useless.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:39 -08:00
Atsushi Nemoto
ba0a7f39ce spi: fix error paths on txx9spi_probe
Some error paths in txx9spi_probe wrongly return 0.  This patch fixes them by
using the devres interfaces.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:39 -08:00
Atsushi Nemoto
350d0076c5 spi: fix double-free on spi_unregister_master
After 49dce689ad, device_for_each_child
iteration hits the master device itself.  Do not call spi_unregister_device()
for the master device.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: David Brownell <david-b@pacbell.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:39 -08:00
Andrew Morton
cbff2fbf55 acpi: make ACPI_PROCFS default to y
Zillions of people are getting my-battery-monitor-doesnt-work problems
(including me).

Lessen the damage by making ACPI_PROCFS default to on.

Cc: Len Brown <lenb@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:39 -08:00
Damian Jurd
7105458563 8250_pnp: add support for "LG C1 EXPRESS DUAL" machines
The following is an extra entry to enable the touch screen on the new LG
C1 EXPRESS DUAL machine.

Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:38 -08:00
Adrian Bunk
a9e60e5c3c video/sis/: fix negative array index
This patch fixes the possible usage of a negative value as an array
index spotted by the Coverity checker.

sisfb_validate_mode() could return a negative error code and we must check for
that prior to using its return value as an array index.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:38 -08:00
Adrian Bunk
43054412db lguest_user.c: fix memory leak
This patch fixes a memory leak spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:38 -08:00
Jordan Crouse
62ec56524f LXFB: use the correct MSR number for panel support
A relatively recent version of the Geode LX datasheet listed the wrong
address for one of the MSRs that controls TFT panels, resulting in
breakage.  This patch corrects the MSR address.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:38 -08:00
Stanislav Brabec
28822f22e1 drivers/video/s1d13xxxfb.c: fix build as module with dbg
Attached patch fixes two compilation problems of s1d13xxxfb.c:

- Fixes outdated dbg() message to fix compilation error with debugging enabled.

- Do not read kernel command line options when compiled as module.

Signed-off-by: Stanislav Brabec <utx@penguin.cz>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:38 -08:00
Philippe Elie
df9d177aa2 oProfile: oops when profile_pc() returns ~0LU
Instruction pointer returned by profile_pc() can be a random value.  This
break the assumption than we can safely set struct op_sample.eip field to a
magic value to signal to the per-cpu buffer reader side special event like
task switch ending up in a segfault in get_task_mm() when profile_pc()
return ~0UL.  Fixed by sanitizing the sampled eip and reject/log invalid
eip.

Problem reported by Sami Farin, patch tested by him.

Signed-off-by: Philippe Elie <phil.el@wanadoo.fr>
Tested-by: Sami Farin <safari-kernel@safari.iki.fi>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:37 -08:00
Frank Lichtenheld
03ad369ac9 uvesafb: fix warnings about unused variables on non-x86
Variables that are only used in #ifdef CONFIG_X86 should also only be
declared there.

Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Cc: Michal Januszewski <spock@gentoo.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:37 -08:00
Randy Dunlap
0f8c0234f2 chipsfb: uses/depends on PCI
chipsfb uses PCI interfaces and should depend on PCI.

  CC      drivers/video/chipsfb.o
drivers/video/chipsfb.c: In function 'chipsfb_pci_init':
drivers/video/chipsfb.c:378: error: implicit declaration of function 'pci_request_region'
drivers/video/chipsfb.c:435: error: implicit declaration of function 'pci_release_region'
make[2]: *** [drivers/video/chipsfb.o] Error 1
make[1]: *** [drivers/video] Error 2
make: *** [drivers] Error 2

!CONFIG_PCI causes the build to fail.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:37 -08:00
Pascal Terjan
ddd73611b7 cm40x0_cs.c: fix debug macros
When PCMCIA_DEBUG is set, cm40x0_cs.c and cm4000_cs.c don't build because the
definition of reader_to_dev uses a non-existent handle field of the struct
pcmcia_device in the call to handle_to_dev.  As handle_to_dev works on struct
pcmcia_device, the fix is quite trivial.

Signed-off-by: Pascal Terjan <pterjan@mandriva.com>
Cc: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:37 -08:00
Bjorn Helgaas
dbd0cf4884 serial: add PNP ID for Davicom ISA 33.6K modem
This should resolve these bug reports of the modem not working:
    http://bugzilla.kernel.org/show_bug.cgi?id=4355
    http://www.linuxquestions.org/questions/linux-newbie-8/connect-script-failed-on-ppp-go-123975/

I don't have hardware to test this, but the initial report in the kernel
bugzilla indicates that this change fixed the problem.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Dmitry Vavilov <vavilov@ihep.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:36 -08:00
Li Zefan
e9b5a495dc W1: fix memset size error
The size argument passed to memset is wrong.

Signed-off-by Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:36 -08:00
Li Zefan
3cc2c17700 drivers/video/ps3fb: fix memset size error
The size passed to memset is wrong.

Signed-off-by Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:36 -08:00
David Brownell
682d73f685 rtc-ds1307 exports NVRAM
Export the NVRAM on DS1307 and DS1338 chips, like several of the
other drivers do for such combination RTC-and-NVRAM chips.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:36 -08:00
David Brownell
a4b1d50e61 RTCs: handle NVRAM better
Several of the RTC drivers are exporting binary "nvram" files in sysfs.  Such
NVRAM (or on many systems, EEPROM) data is often initialized during system
manufacture to hold data about identity (serial numbers, Ethernet addresses,
etc), configuration, calibration, and so forth.

This patch improves integrity and security of those files:

  - Correctly initializes the size in one of the two cases where
    that was not yet being done.

  - Improves system security/integrity by making this state not
    be world-writable by default.

Letting arbitrary userspace code mangle such state by default is at least Not
A Good Thing; and it could sometimes be worse, depending on the particular
data that might be corrupted.  (I disregard the paranoiac "don't let anyone
read it either" approach.  Anyone storing passwords in such memory doesn't
really care about security.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Torsten Ertbjerg Rasmussen <tr@newtec.dk>
Cc: Mark Zhan <rongkai.zhan@windriver.com>
Cc: Thomas Hommel <thomas.hommel@gefanuc.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:36 -08:00
David Brownell
779d20892f rtc_hctosys expects RTCs in UTC (doc)
The RTC "hctosys" mechanism expects that RTC clock will use UTC, not local
time (e.g.  PST).  Say so in Kconfig and in the kernel message.

(Strictly speaking, the RTC clock should be tracking the POSIX epoch.  That's
not worth going into here.  Goofing timezones means clocks are wrong by many
hours; the POSIX-v-UTC differences just cost seconds.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:36 -08:00
Andrey Borzenkov
1299342bac Fix Oops in toshiba_acpi error return path
When backlight_device_register() fails, return after undo initialization, do
not try to use pointer that just was reset to NULL

This fixes this oops:

[ 1595.177672]  [<c010480a>] show_trace_log_lvl+0x1a/0x30
[ 1595.177706]  [<c01052a2>] show_trace+0x12/0x20
[ 1595.177718]  [<c0105305>] dump_stack+0x15/0x20
[ 1595.177728]  [<c01c9375>] kobject_shadow_add+0x125/0x1c0
[ 1595.177754]  [<c01c941a>] kobject_add+0xa/0x10
[ 1595.177764]  [<c0239a37>] device_add+0x97/0x5d0
[ 1595.177776]  [<c0239f82>] device_register+0x12/0x20
[ 1595.177786]  [<dfd912df>] backlight_device_register+0x9f/0x110 [backlight]
[ 1595.177814]  [<df861117>] toshiba_acpi_init+0x117/0x15e [toshiba_acpi]
[ 1595.177834]  [<c013e28d>] sys_init_module+0xfd/0x14e0
[ 1595.177871]  [<c0104112>] sysenter_past_esp+0x5f/0x99
[ 1595.177883]  =======================
[ 1595.177890] Could not register toshiba backlight device
[ 1595.177985] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000004
...
[ 1595.394097] EIP:    0060:[<df861143>]    Not tainted VLI
[ 1595.394101] EFLAGS: 00010282   (2.6.23-rc9-1avb #24)
[ 1595.480081] EIP is at toshiba_acpi_init+0x143/0x15e [toshiba_acpi]

Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: John Belmonte <toshiba_acpi@memebeam.org>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-14 18:45:36 -08:00
Bartlomiej Zolnierkiewicz
0fd4980fa7 ide: remove stale/incorrect comment from setup-pci.c
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-13 22:09:16 +01:00
Bartlomiej Zolnierkiewicz
24ffbd6258 it821x/jmicron: fix return value of {it821x,jmicron}_init_one()
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-13 22:09:16 +01:00
Bartlomiej Zolnierkiewicz
34c69b601b ide: don't BUG() on unsupported transfer modes
Fix ide-cris, cs5530, sc1200 and sis5513 host drivers to just return instead
of OOPS-ing for unsupported modes in ->set_dma_mode methods.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-13 22:09:15 +01:00
Bartlomiej Zolnierkiewicz
c1f50cbb06 ide: use drive->select.all for REQ_TYPE_ATA_TASK in execute_drive_cmd()
Use drive->select.all for REQ_TYPE_ATA_TASK requests in execute_drive_cmd()
(the obsolete bits 7 and 5 of the Device register need to be set).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-13 22:09:15 +01:00
Bartlomiej Zolnierkiewicz
12eda14f89 ide: add missing HOB bit clearing to ide_dump_ata_status()
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-13 22:09:15 +01:00
Bartlomiej Zolnierkiewicz
03644cd497 ide-pmac: skip conservative PIO "downgrade"
We can skip conservative PIO "downgrade" (PIO3 becomes PIO2 etc.) on PMAC.

Problem reported by Mikael.

Cc: Mikael Pettersson <mikpe@it.uu.se>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-13 22:09:15 +01:00
Adrian Bunk
2ad1e0558f ide: BLK_DEV_IDECD help: remove outdated note
LILO version 16 was released on 26-02-1995 (sic), so telling people to not use
older versions no longer has any value.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-13 22:09:14 +01:00
Sergei Shtylyov
6183289cd4 cmd64x: don't clear the other channel's interrupt
Make sure to not clear the other IDE channel's interrupt when clearing an IDE
interrupt via the MRDMODE register.

Thanks to Bart for finding a coding mistake.

Bart:

This fixes regression from commit 66602c83dc
("cmd64x: use interrupt status from MRDMODE register (take 2)").

Extra thanks to Martin for reporting and bisecting the issue.

From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Tested-by: Martin Rogge <marogge@onlinehome.de>
Tested-by: Milan Kocian <milon@wq.cz>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-11-13 22:09:14 +01:00
Linus Torvalds
9418d5dc9b Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6:
  hwmon: (i5k_amb) Convert macros to C functions
  hwmon: (w83781d) Add missing curly braces
  hwmon: (abituguru3) Identify ABit IP35 Pro as such
  hwmon: (f75375s) pwmX_mode sysfs files writable for f75375 variant
  hwmon: (f75375s) On n2100 systems, set fans to full speed on boot
  hwmon: (f75375s) Allow setting up fans with platform_data
  hwmon: (f75375s) Add new style bindings
  hwmon: (lm70) Convert semaphore to mutex
  hwmon: (applesmc) Add support for Mac Pro 2 x Quad-Core
  hwmon: (abituguru3) Add support for 2 new motherboards
  hwmon: (ibmpex) Change printk to dev_{info,err} macros
  hwmon: (i5k_amb) New memory temperature sensor driver
  hwmon: (f75375s) fix pwm mode setting
  hwmon: (ibmpex.c) fix NULL dereference
  hwmon: (sis5595) Split sis5595_attributes_opt
  hwmon: (sis5595) Add individual alarm files
  hwmon: (w83627hf) push nr+1 offset into *_REG_FAN macros and simplify
  hwmon: (w83627hf) hoist nr-1 offset out of show-store-temp-X
  hwmon: Add power meter spec to Documentation/hwmon/sysfs-interface
2007-11-13 09:09:36 -08:00
Linus Torvalds
31083eba37 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (45 commits)
  [NETFILTER]: xt_time should not assume CONFIG_KTIME_SCALAR
  [NET]: Move unneeded data to initdata section.
  [NET]: Cleanup pernet operation without CONFIG_NET_NS
  [TEHUTI]: Fix incorrect usage of strncat in bdx_get_drvinfo()
  [MYRI_SBUS]: Prevent that myri_do_handshake lies about ticks.
  [NETFILTER]: bridge: fix double POSTROUTING hook invocation
  [NETFILTER]: Consolidate nf_sockopt and compat_nf_sockopt
  [NETFILTER]: nf_nat: fix memset error
  [INET]: Use list_head-s in inetpeer.c
  [IPVS]: Remove unused exports.
  [NET]: Unexport sysctl_{r,w}mem_max.
  [TG3]: Update version to 3.86
  [TG3]: MII => TP
  [TG3]: Add A1 revs
  [TG3]: Increase the PCI MRRS
  [TG3]: Prescaler fix
  [TG3]: Limit 5784 / 5764 to MAC LED mode
  [TG3]: Disable GPHY autopowerdown
  [TG3]: CPMU adjustments for loopback tests
  [TG3]: Fix nvram selftest failures
  ...
2007-11-13 09:04:48 -08:00
Alexey Starikovskiy
9104476e4e ACPI: Battery: remove cycle from battery removal.
get_property() should not call battery_update(), it also should call
get_status() only if battery is present to avoid cycle and oops.

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Acked-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-13 09:02:18 -08:00
Denis V. Lunev
022cbae611 [NET]: Move unneeded data to initdata section.
This patch reverts Eric's commit 2b008b0a8e

It diets .text & .data section of the kernel if CONFIG_NET_NS is not set.
This is safe after list operations cleanup.

Signed-of-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13 03:23:50 -08:00
Roel Kluin
072ee3f9bd [TEHUTI]: Fix incorrect usage of strncat in bdx_get_drvinfo()
Fix incorrect length for strncat by replacing it with strlcat

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13 03:17:16 -08:00
Roel Kluin
9db7720cca [MYRI_SBUS]: Prevent that myri_do_handshake lies about ticks.
With '<=' tick can be incremented up to 26, The last loop is redundant
since even when 'softstate' becomes 'STATE_READY', 'if (tick > 25)'
will still cause the function to return -1,

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-13 03:16:17 -08:00
Matt Carlson
458c096ed7 [TG3]: Update version to 3.86
This patch updates the version number to 3.86

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 21:23:21 -08:00
Matt Carlson
3bebab5914 [TG3]: MII => TP
This patch changes the PHY type reported through ethtool for copper
devices from MII to TP.  The latter is more accurate.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 21:22:40 -08:00
Matt Carlson
b5af7126ea [TG3]: Add A1 revs
This patch adds the A1 revision of 5784, 5764, and 5761, and applies all
previous bugfixes.  In places where the list of devices gets too long,
the patch uses a new TG3_FLG3_5761_5784_AX_FIXES flag instead.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-12 21:22:02 -08:00